# Bell Alert Service Bulletin 412-07-123: Revision B

- Rights: © Bell Textron Inc. Filed by the FAA in regulations.gov docket FAA-2012-0355, the docket of AD 2012-07-01. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Bell Alert Service Bulletin 412-07-123](https://openairdocs.org/service-documents/bell/sb-412-07-123.md)
- Title as filed: U.S. DOT/FAA - Bell ASB 412-07-123 Rev B 11-22-10
- Pages: 4
- PDF: https://openairdocs.org/files/sha256/f3/5b/f35bef6f8dae86b9c165b384a6ea8369978a1a960daf1db201cf635608782743
- Page: https://openairdocs.org/service-documents/bell/sb-412-07-123/file/f35bef6f8dae

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

ALERT SERVICE BULLETIN
DATE 11-22-10  Be! Helicopter  NO.  DATE  SEP 11, 2007  412-07-123
REV  B  A Textron Company  PAGE  1 of 1
MODEL AFFECTED:  412, 412EP
SUBJECT:  TAIL ROTOR BLADE ASSEMBLY, INSPECTION
HELICOPTERS AFFECTED:  All Models 412 and 412EP helicopters serial
number 33001 through 33213, 34001 through
34036 and 36001 through 36542.
COMPLIANCE:  Prior to next flight.
DESCRIPTION:
The purpose of this bulletin is to achieve complete distribution of the attached RBI
letter to Bell Helicopter's current operator list.
Affected tail rotor blades that have been inspected / repaired in accordance with this
ASB shall have letter "L vibro-etched immediately following the part number on the
tail rotor blade ID tag and returned to service.
APPROVAL:
The engineering design aspects of this bulletin are FAA/ODA approved.
AN APPROPRIATE ENTRY SHOULD BE MADE IN THE AIRCRAFT LOGBOOK UPON ACCOMPLISHMENT
IF OWNERSHIP OF AIRCRAFT HAS CHANGED PLEASE FORWARD TO NEW OWNER

### Page 2 (OCR)

RBI
REVISION A November 10, 2010
Bell Product Support Engineering,
Rotor Blades Inc. has received a fourth blade in which one tip weight was lost in
flight. This blade was balanced during the term of employment of the former RBI
technician noted below. This occurrence has prompted RBI to recall all tail rotors
balanced during former technician's term of employment.
The list attached includes additional blades RBI now considers suspect. We are
asking Bell Product Support to re-issue affected ASB's calling for immediate inspection of
affected blades.
September 11, 2007
Mr. Jack Denham
Executive Director of Product Support
Bell Helicopter Textron
Rotor Blades, Inc. (RBI) has received reports of three incidents in which weights were slung
from tail rotor blades during flight and causing vibration. The failures reported occurred
ranging from 400 flight hours since repair to as short as 12 minutes. We have determined that
this may affect most bell models. To ensure safety and to expedite re-inspection required we
advise and ask you distribute to fleet on a most urgent basis.
Investigation indicates that tip weight screws may be missing the adhesive applied during the
weight and balance process on these blades. The blades in question were all processed by one
former RBI technician.
RBI has initiated customer contact and inspection of blades to reduce customer impact.
Additionally, we are working with our local FAA representative to ensure regulations are met. I
ask Bell support and assistance to ensure DOT and OEM requirements are met for release.
RBI is capable of carrying out inspection to existing requirements. Balance weight screws must
be accessed and verified for correct installation. This must be carried out by a Bell approved
Rotor Blade Repair Facility.

### Page 3 (OCR)

BEFORE THE NEXT FLIGHT, ALL OPERATORS SHOULD INSPECT THEIR BLADES
USING THE ATTACHED LIST TO DETERMINE WHETHER THEIR BLADES ARE
AFFECTED. ALL AFFECTED BLADES SHOULD BE REMOVED FROM SERVICE
IMMEDIATELY AND RETURNED TO AN RBI FACILITY FOR EXAMINATION AND
REPAIR.
The list attached includes all blades RBI has determined re-inspection is required on.
Troy Penny
Director of Operations
Rotor Blades Inc.
Warranty Statement:
Owners / Operators of Bell Helicopters who comply with the instructions in this Bulletin
will be eligible to return defective blades identified by serial number in the compliance
section of this bulletin to your nearest RBI facility for inspection and repair at no cost. In
order to process your request please contact your local RBI facility to make arrangements
for the return of the blade or blade's using RBI's FedEx account #2546-92336.
Rotor Blades Inc.
580 St Etienne Road
Broussard, LA 70518
Phone 337-839-2119
Fax 337-839-2122
RBI Hawker Limited
LIU FZS1 BD06/07, JAFZ (South)
P.O. Box 16784
Dubai, UAE
Phone 971-4-886-0144
Fax 971-4-886-0145
Rotor Blades Limited
5B Crusader Park
Bath Road
Warmintser
Wiltshire BA12 8SJ
United Kingdom
Phone 44-1985-847040
Fax 44-1985-846356

### Page 4 (OCR)

Part Number  S/N
212-010-750-105FM  A-10090
A-10836
A-11207
A-11332
212-010-750-113  A-14953
A-15090
CS-12702
212-010-750-113FM  A-12240
A-12296
A-12640
A-12670
A-12789
A-13033
A-13096
A-13134
A-13199
A-13264
A-13366
212-010-750-133  A-15602
Part Number  S/N
212-010-750-105  A-11923
212-010-750-105FM  A-10857
A-11617
A-11828
A-12043  B
A-12091
212-010-750-113FM  A-12286
A-12398
A-13088
A-13106
A-13539

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
