# Bell Alert Service Bulletin 427-07-18: Revision A

- Rights: © Bell Textron Inc. Filed by the FAA in regulations.gov docket FAA-2009-0301, the docket of AD 2009-08-03. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Bell Alert Service Bulletin 427-07-18](https://openairdocs.org/service-documents/bell/sb-427-07-18.md)
- Title as filed: U.S. DOT/FAA - Bell ASB 427-07-18 Rev A
- Pages: 6
- PDF: https://openairdocs.org/files/sha256/5e/6d/5e6dbdbbcb23f96d993e15453ef5baf88e64d8f20334b4e1c894d0ed4291d3f2
- Page: https://openairdocs.org/service-documents/bell/sb-427-07-18/file/5e6dbdbbcb23

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

ALERT SERVICE BULLETIN
REVISION NOTICE
Bell HelicopterTEXTRON  DATE  Sept 19, 2007
A Subsidiary of Textron Inc
TO:  All Owners/Operators of Bell 427 Helicopters
SUBJECT: REVISION "A" TO ALERT SERVICE BULLETIN 427-07-18:
TAIL ROTOR BLADE ASSEMBLY, INSPECTION OF
Revision "A" to this bulletin adds a statement for tail rotor blades that have been
returned to an authorized Bell Helicopter rotor blade repair station for inspection in
accordance with this ASB. These tail rotor blades will be permanently identified with
the letter "L" immediately following the part number on the tail rotor blade identification
AN APPROPRIATE ENTRY SHOULD BE MADE IN THE AIRCRAFT LOGBOOK UPON ACCOMPLISHMENT
IF OWNERSHIP OF AIRCRAFT HAS CHANGED PLEASE FORWARD TO NEW OWNER

### Page 2 (OCR)

ALERT SERVICE BULLETIN
Bell Helicopter TEXTRON  NO.  427-07-18
DATE SEP 19, 2007  A Subsidiary of Textron Inc.  DATE  SEP 11, 2007
REV  PAGE
MODEL AFFECTED:  427
SUBJECT:  TAIL ROTOR BLADE ASSEMBLY, INSPECTION
HELICOPTERS AFFECTED: All Model 427 helicopters
COMPLIANCE:  Prior to next flight.
DESCRIPTION:
The purpose of this bulletin is to achieve complete distribution of the attached RBI
letter to Bell Helicopter's current operator list.
Affected tail rotor blades that have been inspected/repaired in accordance with this
ASB shall have letter "L" vibro-etched immediately following the part number on the
tail rotor blade ID tag and returned to service.
APPROVAL:
Not Required.
AN APPROPRIATE ENTRY SHOULD BE MADE IN THE AIRCRAFT LOGBOOK UPON ACCOMPLISHMENT
IF OWNERSHIP OF AIRCRAFT HAS CHANGED PLEASE FORWARD TO NEW OWNER

### Page 3 (OCR)

September 11, 2007
Mr. Jack Denham
Executive Director of Product Support
Bell Helicopter Textron
Rotor Blades, Inc. (RBI) has received reports of three incidents in which weights were slung from tail
rotor blades during flight significant causing vibration. The failures reported occurred ranging from
400 flight hours since repair to as short as 12 minutes. We have determined that this may affect most
Bell models. To ensure safety and to expedite re-inspection required, we advise and ask you
distribute to fleet on a most urgent basis.
Investigation indicates that tip weight screws may be missing the adhesive applied during the weight
and balance process on these blades. The blades in question were all processed by one former RBI
RBI has initiated customer contact and inspection of blades to reduce customer impact. Additionally,
we are working with our local FAA representative to ensure regulations are met. I ask Bell support
and assistance to ensure DOT and OEM requirements are met for release.
RBI is capable of carrying out inspection to existing requirements. Balance weight screws must be
accessed and verified for correct installation. This must be carried out by a Bell approved Rotor Blade
Repair Facility.
BEFORE THE NEXT FLIGHT, ALL OPERATORS SHOULD INSPECT THEIR TAIL ROTOR BLADES USING
THE ATTACHED LIST TO DETERMINE WHETHER THEIR BLADES ARE AFFECTED. ALL AFFECTED
BLADES SHOULD BE REMOVED FROM SERVICE IMMEDIATELY AND RETURNED TO AN RBI FACILITY
FOR EXAMINATION AND REPAIR.
The list attached includes all blades RBI has determined re-inspection is required on.
Troy Penny
Director of Operations
Rotor Blades Inc.

### Page 4 (OCR)

Warranty Statement:
Owners / Operators of Bell Helicopters who comply with the instructions in this Bulletin
will be eligible to return defective blades identified by serial number in the compliance
section of this bulletin to your nearest RBI facility for inspection and repair at no cost. In
order to process your request please contact your local RBI facility to make arrangements
for the return of the blade or blade's using RBI's FedEx account #2546-92336.
Rotor Blades Inc.
580 St Etienne Road
Broussard, LA 70518
Phone 337-839-2119
Fax 337-839-2122
RBI Hawker Limited
LIU FZS1 BD06/07, JAFZ (South)
P.O. Box 16784
Dubai, UAE
Phone 971-4-886-0144
Fax 971-4-886-0145
Rotor Blades Limited
5B Crusader Park
Bath Road
Warmintser
Wiltshire BA12 8SJ
United Kingdom
Phone 44-1985-847040
Fax 44-1985-846356

### Page 5 (OCR)

Part Number  S/N
427-016-001-109  A-132
A-161
A-169
A-182

### Page 6

(No text on this page.)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
