# Boeing Alert Requirements Bulletin 727-57A0190 RB: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2022-1051; AD 2022-25-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Requirements Bulletin 727-57A0190 RB](https://openairdocs.org/service-documents/boeing/727-57a0190-rb.md)
- Title as filed: 727-57A0190 RB
- Pages: 23
- PDF: https://openairdocs.org/files/sha256/d1/e9/d1e9fa186092ab785351c56c22482c70be959f75c15d716a3370071e3767fcd3
- Page: https://openairdocs.org/service-documents/boeing/727-57a0190-rb/file/d1e9fa186092

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
727
Requirements Bulletin
ALERT
Number: 727-57A0190 RB
Original Issue: September 13, 2021
ATA System: 5714
SUBJECT: WINGS - Center Wing Box - Lower Skin and Rear Spar Lower Chord Inspection
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
Copyright © 2021 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: September 13, 2021
727-57A0190 RB
1 of 23
3.0

### Page 2

Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
2 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
1 . E F F E C T I V I T Y  ................................................ 5
A . A i r p l a n e s  ................................................ 5
B . S p a r e s  A f f e c t e d  ............................................ 7
2. CONCURRENT REQUIREMENTS ..................................... 7
3 . C O M P L I A N C E  ................................................ 7
4. APPROVAL ................................................ 1 0
5. ACCOMPLISHMENT INSTRUCTIONS .................................. 1 1
A. General Information ......................................... 1 1
B. Work Instructions ........................................... 1 2
FIGURE 2: CENTER WING BOX - LOWER SKIN AND REAR SPAR LOWER CHORD BETWEEN LBBL
34.7 AND RBBL 34.7 - DETAILED INSPECTION [Group 2-3] ................ 1 6
FIGURE 3: CENTER WING BOX - LOWER SKIN AND REAR SPAR LOWER CHORD BETWEEN LBBL
34.7 AND RBBL 34.7 - SEALANT APPLICATION [Group 2-3] ................ 2 0
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
3 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
4 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
727
Requirements Bulletin
ALERT
Number: 727-57A0190 RB
Original Issue: September 13, 2021
ATA System: 5714
SUBJECT: WINGS - Center Wing Box - Lower Skin and Rear Spar Lower Chord Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING
PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN
(RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL
TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB
WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
1. Effectivity
A. Airplanes
This bulletin is applicable to 727, 727-100, 727-100C, 727-200, 727-200F, 727C Airplane(s), line
number(s) 1-1832 in 3 Group(s). Where the effectivity is presented with hyphens between line
numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means
line numbers 1 through 9 inclusive.
This service bulletin is applicable to 727, 727-100/-100C/-200/-200F, 727C Airplanes. The Variable
Numbers and Group Information for the applicable airplanes is given below.
DESCRIPTIONCONFIGURATIONGROUP
727 Airplanes beyond the Limit of Validaty (LOV).-1
727/727-100/727-200 Airplanes.-2
Airplanes with bladder fuel cells in the wing center section.1
Airplanes with an integral fuel tank in the wing center section.2
727C/727-100C/727-200F Airplanes.-3
Airplanes with bladder fuel cells in the wing center section.1
Airplanes with an integral fuel tank in the wing center section.2
Airplane Models:
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
5 of 23

### Page 6

727, 727-100, 727-100C, 727-200, 727-200F, 727C
GroupVariable Number
1E0001 - E0018
2E0019 - E0042
1E0101 - E0112
2E0113 - E0140
1E0201 - E0205
2E0206 - E0216
1E0301 - E0308
2E0309 - E0351
1E0401 - E0404
2E0405 - E0423
2E3001 - E3006
2E3011 - E3014
2E3021 - E3040
2E3059
2E3061 - E3077
2E3101 - E3103
2E3111 - E3118
2E3141 - E3152
2E3171 - E3177
2E3201 - E3206
2E3221 - E3224
2E3241 - E3290
2E3341 - E3350
2E3401 - E3421
2E3451 - E3452
2E3471 - E3474
2E3501 - E3513
2E3516 - E3523
2E3551 - E3553
2E3571 - E3578
2E3601 - E3604
GroupVariable Number
2E3621 - E3622
2E3651 - E3655
2E3677
2E3681 - E3684
2E3701 - E3704
2E3751 - E3755
2E3781 - E3784
3E5001 - E5011
3E5031 - E5068
3E5101 - E5116
3E5141 - E5143
3E5161 - E5164
3E5201 - E5203
3E5221 - E5245
3E5251 - E5252
3E5271 - E5281
3E5301 - E5306
3E5351 - E5353
3E5381 - E5382
3E5401 - E5424
3E5426 - E5429
3E5433
3E5435
3E5451 - E5455
3E5481 - E5483
3E5501 - E5502
2QA001 - QA046
2QA051 - QA099
2QA101 - QA199
2QA201 - QA225
2QA301 - QA349
GroupVariable Number
2QA351 - QA376
2QA378
2QA401 - QA499
2QA501 - QA537
2QA551 - QA579
2QA581 - QA585
2QA601 - QA688
2QA701 - QA753
2QA801 - QA805
2QA851 - QA899
2QA901 - QA946
2QA949
2QB001 - QB002
2QB031 - QB049
2QB051 - QB068
2QB101 - QB110
2QB114 - QB119
2QB121 - QB149
2QB151 - QB158
2QB201 - QB220
2QB301 - QB316
2QB351 - QB352
2QB401 - QB407
2QB451 - QB458
2QB501 - QB575
2QB601 - QB629
2QB651
2QB701 - QB705
2QB801 - QB810
2QB901 - QB904
2QD001 - QD012
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
6 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT

### Page 7

GroupVariable Number
2QD031 - QD046
2QD085 - QD088
2QD101 - QD105
2QD121 - QD127
2QD141 - QD149
2QD161 - QD164
2QD191 - QD192
2QD201 - QD239
2QD281 - QD284
2QD301 - QD305
2QD321 - QD330
2QD351
2QD401 - QD403
2QD407
2QD410
2QD421 - QD427
GroupVariable Number
2QD441 - QD453
2QD471 - QD475
2QD501 - QD518
2QD551 - QD558
2QD571 - QD572
2QD581 - QD583
2QD601 - QD607
2QD621 - QD624
2QD641
2QD661 - QD663
2QD681 - QD685
2QD691 - QD692
2QD701 - QD702
2QD711 - QD717
2QD741
2QD761 - QD769
GroupVariable Number
2QD781 - QD782
2QD791
2QD801 - QD804
2QD821 - QD828
2QD901 - QD910
2QD931 - QD932
2QD951 - QD954
2QD971 - QD973
2QD991 - QD992
2QE001 - QE002
2QL001 - QL008
2QL031 - QL032
2QL081
3QL501 - QL515
--
--
B. Spares Affected
None.
2. CONCURRENT REQUIREMENTS
None.
3. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
Requirements Bulletin 727-57A0190 RB. The Airworthiness Directive will make the compliance tasks and
times given in Requirements Bulletin 727-57A0190 RB mandatory.
Group 1:
Boeing endorses the FAA rules related to Limit of Validity (LOV) and recommends immediate and permanent
removal from service of any airplanes upon reaching the LOV, whether or not it is operated under FAA
jurisdiction. As such, Boeing no longer provides maintenance instructions for airplanes that have accumulated
flight cycles beyond the LOV. Airplanes in Group 1 (line numbers 1-47) have accumulated flight cycles
beyond the LOV of the maintenance program. 14 CFR 121.1115 and 129.115 prohibit operation of an
airplane beyond its LOV.
Group 2:
Accomplish the required action(s), based on the applicable condition(s) in Table 1, in accordance with
Accomplishment Instructions.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
7 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT

### Page 8

Group 3:
Accomplish the required action(s), based on the applicable condition(s) in Table 2, in accordance with
Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Group 2:
Table 1: Wing - Center Wing Box, Lower Skin and Rear Spar Lower Chord between LBBL 34.7 and RBBL
34.7 - Detailed Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichev-
er Occurs Later)
ActionCondition
-Within 1,800
flight cycles af-
ter the Original
Issue date of
Requirements
Bulletin 727-
57A0190 RB.
Before 55,000
Total Flight
Cycles.
Do an internal Detailed Inspec-
tion of the center wing box, low-
er skin and rear spar lower
chord between LBBL 34.7 and
RBBL 34.7 for any crack.
All airplanes.
-Before further flight.CONDITION 1 (ACTION 1):CONDITION 1: NO
CRACK FOUND Apply sealant to the lower skin
and lower chord inspection area.
10,000 Flight Cy-
cles.
-CONDITION 1 (ACTION 2):
Repeat internal Detailed Inspec-
tion of the center wing box, low-
er skin and rear spar lower
chord between LBBL 34.7 and
RBBL 34.7 for any crack. (a)
-Before further flight.CONDITION 2 (ACTION 1):CONDITION 2: ANY
CRACK FOUND Contact the Boeing Company
for repair instructions and do the
repair.
-Before further flight.CONDITION 2 (ACTION 2):
Apply sealant to the lower skin
and lower chord inspection area.
10,000 Flight Cy-
cles.
-CONDITION 2 (ACTION 3):
Repeat internal Detailed Inspec-
tion of the center wing box, low-
er skin and rear spar lower
chord between LBBL 34.7 and
RBBL 34.7 for any crack at unre-
paired areas. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
8 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT

### Page 9

Group 2:
Table 1: Wing - Center Wing Box, Lower Skin and Rear Spar Lower Chord between LBBL 34.7 and RBBL
34.7 - Detailed Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichev-
er Occurs Later)
ActionCondition
(a) It is not required to do the inspection in areas where a repair covers the affected inspection area if the
repair meets the conditions that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 727-
57A0190 RB and installed after the original issue date of Requirements Bulletin 727-57A0190
RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9.
Group 3:
Table 2: Wing - Center Wing Box, Lower Skin and Rear Spar Lower Chord between LBBL 34.7 and RBBL
34.7 - Detailed Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichev-
er Occurs Later)
ActionCondition
-Within 1,800
flight cycles af-
ter the Original
Issue date of
Requirements
Bulletin 727-
57A0190 RB.
Before 46,000
Total Flight
Cycles.
Do an internal Detailed Inspec-
tion of the center wing box, low-
er skin and rear spar lower
chord between LBBL 34.7 and
RBBL 34.7 for any crack.
All airplanes.
-Before further flight.CONDITION 3 (ACTION 1):CONDITION 3: NO
CRACK FOUND Apply sealant to the lower skin
and lower chord inspection area.
10,000 Flight Cy-
cles.
-CONDITION 3 (ACTION 2):
Repeat internal Detailed Inspec-
tion of the center wing box, low-
er skin and rear spar lower
chord between LBBL 34.7 and
RBBL 34.7 for any crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
9 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT

### Page 10

Group 3:
Table 2: Wing - Center Wing Box, Lower Skin and Rear Spar Lower Chord between LBBL 34.7 and RBBL
34.7 - Detailed Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichev-
er Occurs Later)
ActionCondition
-Before further flight.CONDITION 4 (ACTION 1):CONDITION 4: ANY
CRACK FOUND Contact the Boeing Company
for repair instructions and do the
repair.
-Before further flight.CONDITION 4 (ACTION 2):
Apply sealant to the lower skin
and lower chord inspection area.
10,000 Flight Cy-
cles.
-CONDITION 4 (ACTION 3):
Repeat internal Detailed Inspec-
tion of the center wing box, low-
er skin and rear spar lower
chord between LBBL 34.7 and
RBBL 34.7 for any crack at unre-
paired areas. (a)
(a) It is not required to do the inspection in areas where a repair covers the affected inspection area if the
repair meets the conditions that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 727-
57A0190 RB and installed after the original issue date of Requirements Bulletin 727-57A0190
RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9.
4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
10 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT

### Page 11

5.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. For the related SB, some locations are marked RC Start and RC
End to identify the requirements that are restated from the RB. For the related SB,
the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD.
Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations
to steps between RC Start and RC End, including substeps and identified figures.
For the related SB, the steps not between RC Start and RC End may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC; this is provided that the
steps between RC Start and RC End, including sub-steps and identified figures, can
still be done as specified, and the airplane can be put back in an airworthy condition.
Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. Boeing Service Letter 727-SL-51-041, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 727 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 727
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 727
Aircraft Maintenance Manual (AMM).
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
11 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT

### Page 12

— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
7. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
8. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
9. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
10. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation or assembly to detect damage, failure or irregularity. This could include
tactile assessment in which a component or assembly can be checked for
tightness/security. Available lighting is normally supplemented with a direct source
of good lighting at an intensity deemed appropriate. Inspection aids such as mirrors
and magnifying lenses may be necessary. Surface cleaning and elaborate access
procedures may be required.
11. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION,
do all of the ACTION numbers for that CONDITION or OPTION.
B. WORK INSTRUCTIONS
Actions Required for Compliance:
1. Requirements
Group 1:
Boeing endorses the FAA rules related to Limit of Validity (LOV) and recommends immediate and
permanent removal from service of any airplanes upon reaching the LOV, whether or not it is
operated under FAA jurisdiction. As such, Boeing no longer provides maintenance instructions for
airplanes that have accumulated flight cycles beyond the LOV. Airplanes in Group 1 (line numbers
1-47) have accumulated flight cycles beyond the LOV of the maintenance program. 14 CFR
121.1115 and 129.115 prohibit operation of an airplane beyond its LOV.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
12 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT

### Page 13

Group 2:
Table 1: Wing - Center Wing Box, Lower Skin and Rear Spar Lower Chord between LBBL 34.7 and RBBL
34.7 - Detailed Inspection
Refer to the listed
procedures in SB
727-57A0190
Original Issue or
later approved re-
visions as an ac-
cepted proce-
dure.
Method of ComplianceActionCondition
PART 1: OPEN
ACCESS
-Do an internal Detailed Inspec-
tion of the center wing box, low-
er skin and rear spar lower
chord between LBBL 34.7 and
RBBL 34.7 for any crack.
All airplanes
FIGURE 1
-FIGURE 2
-FIGURE 3CONDITION 1 (ACTION 1):CONDITION 1: NO
CRACK FOUND Apply sealant to the lower skin
and lower chord inspection area. PART 2: CLOSEACCESS-
PART 1: OPEN
ACCESS
-CONDITION 1 (ACTION 2):
Repeat internal Detailed Inspec-
tion of the center wing box, low-
er skin and rear spar lower
chord between LBBL 34.7 and
RBBL 34.7 for any crack. (a)
FIGURE 1
-FIGURE 2
--CONDITION 2 (ACTION 1):CONDITION 2: ANY
CRACK FOUND. Contact The Boeing Company
for repair instructions and do the
repair.
-FIGURE 3CONDITION 2 (ACTION 2):
Apply sealant to the lower skin
and lower chord inspection area. PART 2: CLOSEACCESS-
PART 1: OPEN
ACCESS
-CONDITION 2 (ACTION 3):
Repeat internal Detailed Inspec-
tion of the center wing box, low-
er skin and rear spar lower
chord between LBBL 34.7 and
RBBL 34.7 for any crack at unre-
paired areas. (a)
FIGURE 1
-FIGURE 2
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
13 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT

### Page 14

Group 2:
Table 1: Wing - Center Wing Box, Lower Skin and Rear Spar Lower Chord between LBBL 34.7 and RBBL
34.7 - Detailed Inspection
Refer to the listed
procedures in SB
727-57A0190
Original Issue or
later approved re-
visions as an ac-
cepted proce-
dure.
Method of ComplianceActionCondition
(a) It is not required to do the inspection in areas where a repair covers the affected inspection area if the
repair meets the conditions that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 727-
57A0190 RB and installed after the original issue date of Requirements Bulletin 727-57A0190
RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9.
Group 3:
Table 2: Wing - Center Wing Box, Lower Skin and Rear Spar Lower Chord between LBBL 34.7 and RBBL
34.7 - Detailed Inspection
Refer to the listed
procedures in SB
727-57A0190
Original Issue or
later approved re-
visions as an ac-
cepted proce-
dure.
Method of ComplianceActionCondition
PART 1: OPEN
ACCESS
-Do an internal Detailed Inspec-
tion of the center wing box, low-
er skin and rear spar lower
chord between LBBL 34.7 and
RBBL 34.7 for any crack.
All airplanes
FIGURE 1
-FIGURE 2
-FIGURE 3CONDITION 3 (ACTION 1):CONDITION 3: NO
CRACK FOUND Apply sealant to the lower skin
and lower chord inspection area. PART 2: CLOSEACCESS-
PART 1: OPEN
ACCESS
-CONDITION 3 (ACTION 2):
Repeat internal Detailed Inspec-
tion of the center wing box, low-
er skin and rear spar lower
chord between LBBL 34.7 and
RBBL 34.7 for any crack. (a)
FIGURE 1
-FIGURE 2
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
14 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT

### Page 15

Group 3:
Table 2: Wing - Center Wing Box, Lower Skin and Rear Spar Lower Chord between LBBL 34.7 and RBBL
34.7 - Detailed Inspection
Refer to the listed
procedures in SB
727-57A0190
Original Issue or
later approved re-
visions as an ac-
cepted proce-
dure.
Method of ComplianceActionCondition
--CONDITION 4 (ACTION 1):CONDITION 4: ANY
CRACK FOUND Contact The Boeing Company
for repair instructions and do the
repair.
-FIGURE 3CONDITION 4 (ACTION 2):
Apply sealant to the lower skin
and lower chord inspection area. PART 2: CLOSEACCESS-
PART 1: OPEN
ACCESS
-CONDITION 4 (ACTION 3):
Repeat internal Detailed Inspec-
tion of the center wing box, low-
er skin and rear spar lower
chord between LBBL 34.7 and
RBBL 34.7 for any crack at unre-
paired areas. (a)
FIGURE 1
-FIGURE 2
(a) It is not required to do the inspection in areas where a repair covers the affected inspection area if the
repair meets the conditions that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 727-
57A0190 RB and installed after the original issue date of Requirements Bulletin 727-57A0190
RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
15 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT

### Page 16

This Figure applies only to: Group 2-3.
FIGURE 2: CENTER WING BOX - LOWER SKIN AND REAR SPAR LOWER CHORD BETWEEN LBBL 34.7
AND RBBL 34.7 - DETAILED INSPECTION
(SHEET 1 OF 4)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
16 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT

### Page 17 (OCR)

REQUIREMENTS BULLETIN 727-57A0190
ALERT  ALERT
RBBL  BBL  LBBL
34.20  REAR SPAR WEB  REAR SPAR  34.20
LOWER CHORD
$ B
C  WING CENTER SECTION REAR SPAR  WING LOWER SKIN
(VIEW LOOKING AFT)
RBBL  A-A
2.00  35.10  RBBL  34.7 2  CRACK  TYPICAL RBBL  25.60  TYPICA  PRACI  RBBL  13.00  LOWER CHORD BBL  REAR SPAR
MINIMUM  REF
TYPICAL
CRACK  0.54 MINIMUM
TYPICAL  CRACK  13.00  LBBL  TYPICAL  CRACK  05.61  CRACK  TYPICAL LBBL LBBL  34.7  35.10
REF
(FASTENER PATTERN AND PART ILLUSTRATION  VIEW LOOKING DOWN  WING LOWER SKIN  - 0.54  MINIMUM E
DETAILED INSPECTION AREA  MAY NOT BE EXACT AS SHOWN)  B-B  29727
FIGURE 2: CENTER WING BOX - LOWER SKIN AND REAR SPAR LOWER CHORD BETWEEN LBBL 34.7
AND RBBL 34.7 - DETAILED INSPECTION
(SHEET 2 OF 4)
Original Issue: September 13, 2021
Export Controlled ECCN: 9E991  727-57A0190 RB
Copyright © Unpublished
Work - See page 1 for details.  17 of 23

### Page 18 (OCR)

REQUIREMENTS BULLETIN 727-57A0190
ALERT  ALERT
— REAR SPAR
LOWER CHORD
- WING LOWER SKIN
2.00
MINIMUM  FWD
C-C
REAR SPAR  TYPICAL
LOWER CHORD  CHORD CRACK
2.0 MINIMUM
TYPICAL SKIN
WING LOWER  CRACK
SKIN  W
VIEW LOOKING DOWN
DETAILED INSPECTION AREA
2974342
FIGURE 2: CENTER WING BOX - LOWER SKIN AND REAR SPAR LOWER CHORD BETWEEN LBBL 34.7
AND RBBL 34.7 - DETAILED INSPECTION
(SHEET 3 OF 4)
Original Issue: September 13, 2021
Export Controlled ECCN: 9E991  727-57A0190 RB
Copyright © Unpublished
Work - See page 1 for details.  18 of 23

### Page 19

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
(a)1-REAR SPAR LOWER
CHORD
Inspect1
(a)1-WING LOWER SKINInspect2
(a) Do an internal Detailed Inspection of the wing lower skin and rear spar lower chord for any crack.
FIGURE 2: CENTER WING BOX - LOWER SKIN AND REAR SPAR LOWER CHORD BETWEEN LBBL 34.7
AND RBBL 34.7 - DETAILED INSPECTION
(SHEET 4 OF 4)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
19 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT

### Page 20

This Figure applies only to: Group 2-3.
FIGURE 3: CENTER WING BOX - LOWER SKIN AND REAR SPAR LOWER CHORD BETWEEN LBBL 34.7
AND RBBL 34.7 - SEALANT APPLICATION
(SHEET 1 OF 4)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
20 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT

### Page 21 (OCR)

REQUIREMENTS BULLETIN 727-57A0190
ALERT  ALERT
RBBL  BBL  LBBL
34.20  REAR SPAR WEB  REAR SPAR  34.20
LOWER CHORD
$ B
C  WING CENTER SECTION REAR SPAR  (VIEW LOOKING AFT)  WING LOWER SKIN
RBBL  A-A
35.10  • RBBL  RBBL  RBBL  LOWER CHORD  REAR SPAR  BBL
002  34.7  25.6(  13.00
MINIMUM  REF
0.54 MINIMUM
LBBL  LBBI  LBBL LBBL
13.00  25.60  34.7  35.10
REF
WING LOWER SKIN  (FASTENER PATTERN AND PART ILLUSTRATION  PASTENE NOT BE ROT AS  MAY NOT BE EXACT AS SHOWN)  (VIEW LOOKING DOWN)  MINIMUM  0.54  2972759
FIGURE 3: CENTER WING BOX - LOWER SKIN AND REAR SPAR LOWER CHORD BETWEEN LBBL 34.7
AND RBBL 34.7 - SEALANT APPLICATION
(SHEET 2 OF 4)
Original Issue: September 13, 2021
Export Controlled ECCN: 9E991  727-57A0190 RB
Copyright © Unpublished
Work - See page 1 for details.  21 of 23

### Page 22 (OCR)

REQUIREMENTS BULLETIN 727-57A0190
ALERT  ALERT
, REAR SPAR PLANE
REAR
SPAR WEB  REAR SPAR
LOWER
CHORD
SEALANT
SEALANT  0.05
MINIMUM  0.08
0.12  • MINIMUM
MINIMUM
0.10
MINIMUM
0.08
MINIMUM -
0.15
SEALANT 1  MINIMUM
REAR SPAR PLANE
WING  • 0.15  MINIMUM  RIVET  REAR
LOWER SKIN  FOR RIVET  SPAR WEB  LOWER  REAR SPAR
C-C  SEALANT  CHORD
(1)
SEALANT  0.10
VINIMUN  0.12  MINIMUM  MINIMUM  0.05  0.08  MINIMUM
0.10
MINIMUM
0.08
MINIMUM
0.15
SEALANT 1)  MINIMUM
0.15
MINIMUM LOCKBOLT AND
WING  COLLAR
LOWER SKIN
FOR LOCKBOLT AND COLLAR
C-C  2972886
FIGURE 3: CENTER WING BOX - LOWER SKIN AND REAR SPAR LOWER CHORD BETWEEN LBBL 34.7
AND RBBL 34.7 - SEALANT APPLICATION
(SHEET 3 OF 4)
Original Issue: September 13, 2021
Export Controlled ECCN: 9E991  727-57A0190 RB
Copyright © Unpublished
Work - See page 1 for details.  22 of 23

### Page 23

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
(a)-BMS 5-45FUEL TANK SEALANTApply1
(b)-BMS 5-45FUEL TANK SEALANTApply2
(a) Apply fillet seal. Refer to SOPM 20-50-19 as an accepted procedure.
(b) Apply BMS 5-45 sealant to the lower skin and lower chord inspection area where sealant was removed.
It is acceptable to apply sealant where it was not applied before. Refer to SOPM 20-50-19 as an accepted
procedure.
FIGURE 3: CENTER WING BOX - LOWER SKIN AND REAR SPAR LOWER CHORD BETWEEN LBBL 34.7
AND RBBL 34.7 - SEALANT APPLICATION
(SHEET 4 OF 4)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 13, 2021
727-57A0190 RB
23 of 23
REQUIREMENTS BULLETIN 727-57A0190
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
