# Boeing Special Attention Requirements Bulletin 737-25-1866 RB: Revision 2

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0481; AD 2025-25-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Requirements Bulletin 737-25-1866 RB](https://openairdocs.org/service-documents/boeing/737-25-1866-rb.md)
- Title as filed: 737-25-1866 RB R2
- Pages: 16
- PDF: https://openairdocs.org/files/sha256/fa/36/fa36100922ef60c7204afdd5f569580d31c372c87f2bba0abd8c64629b91b2e1
- Page: https://openairdocs.org/service-documents/boeing/737-25-1866-rb/file/fa36100922ef

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Requirements Bulletin
SPECIAL ATTENTION
Number: 737-25-1866 RB
Original Issue: September 27, 2021
Revision 2: July 19, 2024
ATA System: 2566
SUBJECT: EQUIPMENT / FURNISHINGS - Door-Mounted Escape System - Escape Slide
Assembly Inspection and Replacement
EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations
(EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for
export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per
Supp.1 to Part 740 of the EAR.
9E991ECCN:
Copyright © 2024 The Boeing Company
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: September 27, 2021
737-25-1866 RBRevision 2: July 19, 2024
1 of 16
2.0

### Page 2

Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 27, 2021
737-25-1866 RBRevision 2: July 19, 2024
2 of 16
REQUIREMENTS BULLETIN 737-25-1866
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
A. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
B. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
A. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
B. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 27, 2021
737-25-1866 RBRevision 2: July 19, 2024
3 of 16
REQUIREMENTS BULLETIN 737-25-1866

### Page 4

Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 27, 2021
737-25-1866 RBRevision 2: July 19, 2024
4 of 16
REQUIREMENTS BULLETIN 737-25-1866
BLANK PAGE

### Page 5

Commercial 
Airplanes
737
Requirements Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 737-25-1866 RBOriginal Issue: September 27, 2021
Revision 2: July 19, 2024
ATA System: 2566
SUBJECT: EQUIPMENT / FURNISHINGS - Door-Mounted Escape System - Escape Slide
Assembly Inspection and Replacement
This revision includes all pages of the requirements bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to
Requirements Bulletin 737-25-1866 RB. The Airworthiness Directive will make the compliance tasks and times
given in Requirements Bulletin 737-25-1866 RB mandatory.
Federal Aviation Administration (FAA) Airworthiness Directive AD 2023-09-04 is related to this bulletin.
Airplanes 1A003, 1A629, 1A692, 1A693, 1B280, 1B283, 1B935, 1C380, 1C452 and 1C455 were removed from
the effectivity.
Airplane 1B531 was re-added to the effectivity.
Effects of this Revision on airplanes on which the Original Issue and Revision 1 was previously done:
None.
REASON FOR REVISION
This revision is sent to remove airplanes and re-add an airplane to the effectivity.
These sections were changed:
– In Airplanes, removed ten airplanes and re-added one airplane to the effectivity.
– In Compliance, updated Airworthiness Directive statement, added Airworthiness Directive and Condition
statement.
– In Approval, in the Requirements Bulletin, added Alternative Method of Compliance (AMOC) statement.
– In Accomplishment Instructions, General Information, added Condition statement.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 27, 2021
737-25-1866 RBRevision 2: July 19, 2024
5 of 16

### Page 6

REVISION HISTORY
Service BulletinService BulletinRequirement BulletinRequirement Bulletin
737-25-1866737-25-1866737-25-1866 RB737-25-1866 RB
Issue DateIssue Date
September 27, 2021Original Issue:September 27, 2021Original Issue:
April 11, 2022Revision 1:April 11, 2022Revision 1:
July 19, 2024Revision 2:July 19, 2024Revision 2:
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 27, 2021
737-25-1866 RBRevision 2: July 19, 2024
6 of 16
REQUIREMENTS BULLETIN 737-25-1866

### Page 7

Commercial 
Airplanes
737
Requirements Bulletin
SPECIAL ATTENTION
Number: 737-25-1866 RB
Original Issue: September 27, 2021
Revision 2: July 19, 2024
ATA System: 2566
SUBJECT: EQUIPMENT / FURNISHINGS - Door-Mounted Escape System - Escape Slide
Assembly Inspection and Replacement
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY. THIS IS
AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE
THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE
INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION
IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB WHICH THE SB REFERS
TO AS THE RELATED DOCUMENT.
1. Effectivity
A. Airplanes
This bulletin is applicable to 737-8, 737-9 Airplane(s), line number(s) 5602, 5668, 5788, 5852,
5902, 5948, 5992, 6034, 6074, 6114, 6154, 6188, 6222, 6250, 6272, 6290, 6308, 6326, 6344,
6360, 6372, 6384, 6396, 6408, 6420, 6430, 6441, 6448, 6456, 6464, 6472, 6481, 6490, 6499,
6508, 6515, 6521, 6528, 6535, 6542, 6548, 6555, 6562, 6569, 6575, 6582, 6589, 6594, 6598,
6603, 6607, 6612, 6616, 6621, 6625, 6630, 6634, 6639, 6643, 6648, 6652, 6657, 6661, 6666,
6672, 6677, 6681, 6686, 6690, 6695, 6699, 6704, 6708, 6713, 6717, 6722, 6726, 6731, 6735,
6740, 6749, 6753, 6758, 6762, 6767, 6771, 6776, 6780, 6783, 6785, 6789, 6792, 6794, 6796,
6803, 6805, 6807, 6810, 6814, 6816, 6819, 6821, 6825, 6828, 6830, 6834, 6837, 6839, 6841,
6843, 6848, 6850, 6852, 6855, 6859, 6861, 6864, 6866, 6868, 6872, 6875, 6877, 6881, 6884,
6886, 6890, 6893, 6895, 6897, 6899, 6904, 6906, 6908, 6911, 6915, 6917, 6920, 6922, 6926,
6929, 6931, 6935, 6938, 6940, 6942, 6944, 6949, 6951, 6953, 6956, 6960, 6963, 6965, 6968,
6970, 6973, 6975-6976, 6978, 6980, 6983, 6985, 6988, 6990-6991, 6993, 6995, 6998, 7000, 7003,
7005-7006, 7008, 7010, 7013, 7015, 7018, 7020, 7023, 7025, 7027-7028, 7030, 7033, 7035, 7038,
7040, 7042-7043, 7045, 7048, 7050, 7053, 7055, 7060, 7062, 7064-7065, 7068, 7070, 7073, 7075,
7077, 7079-7080, 7083, 7085, 7088, 7090, 7093, 7095-7096, 7098, 7100, 7103, 7105, 7108,
7110-7111, 7113, 7115, 7118, 7120, 7123, 7125, 7128, 7130, 7132-7133, 7135, 7138, 7140, 7143,
7145, 7147-7148, 7150, 7153, 7155, 7158, 7160, 7163, 7165-7166, 7168, 7170, 7173, 7175, 7178,
7180-7181, 7183, 7185-7186, 7188, 7190, 7192-7193, 7195-7196, 7198, 7200-7201, 7203, 7205,
7207-7208, 7210-7211, 7213, 7215-7216, 7218, 7220, 7222-7223, 7225-7226, 7228, 7230-7231,
7233, 7236-7238, 7240-7241, 7245-7246, 7248, 7250, 7252-7253, 7255-7256, 7258, 7260-7261,
7265, 7267-7268, 7270-7271, 7273, 7275-7276, 7278, 7281-7283, 7286, 7288, 7290-7291, 7293,
7295-7296, 7298, 7300-7301, 7303, 7305-7306, 7308, 7310-7311, 7313, 7315-7316, 7318,
7320-7321, 7323, 7325-7326, 7328, 7330-7331, 7333, 7335-7336, 7338, 7340-7341, 7343, 7345,
7348, 7350, 7353, 7355-7356, 7358, 7360-7361, 7363, 7365-7366, 7368, 7370, 7373, 7375, 7378,
7380-7381, 7383-7386, 7388-7390, 7393-7395, 7398-7401, 7403-7406, 7409-7411, 7413-7414,
7416, 7419, 7421, 7423, 7425, 7428-7431, 7433, 7435, 7439, 7445-7446, 7448, 7453-7454, 7463,
7469, 7473-7475, 7479, 7481, 7483, 7486, 7489, 7491, 7498-7500, 7513, 7523, 7525-7526, 7535,
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 27, 2021
737-25-1866 RBRevision 2: July 19, 2024
7 of 16

### Page 8

7538-7541, 7543, 7548, 7561, 7565, 7571, 7579-7580, 7585-7586, 7588, 7590, 7598, 7602, 7604,
7612, 7618, 7628, 7634, 7636, 7643, 7648, 7650, 7661, 7663-7664, 7668, 7672-7673, 7678-7679,
7682-7684, 7686, 7689, 7694-7695, 7698, 7701-7702, 7709, 7711, 7717-7718, 7724-7726, 7731,
7739-7740, 7743-7744, 7747, 7749, 7752-7753, 7756, 7758-7759, 7762-7763, 7767, 7769, 7772,
7780, 7783, 7785-7786, 7789, 7793, 7799, 7802-7803, 7808, 7812, 7818-7819, 7821, 7824, 7830,
7832, 7836-7837, 7839, 7842, 7845, 7847, 7850, 7864, 7869, 7873, 7877, 7879-7881, 7883-7884,
7889, 7894-7898, 7902-7903, 7913, 7915-7916, 7918, 7927-7928, 7937-7938, 7942-7943, 7945,
7947, 7951, 7957, 7959-7961, 7967, 7975, 7982, 7984, 7990, 7996, 7998-7999, 8002, 8006, 8009,
8020-8021, 8023, 8033-8035, 8042-8044, 8066, 8069, 8072, 8075, 8092, 8099, 8104, 8107,
8109-8120, 8122, 8124, 8126 in 1 Group(s). Where the effectivity is presented with hyphens
between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers
1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group Information for the applicable airplanes is given below. An
equivalent change is on subsequent production airplanes.
DESCRIPTIONCONFIGURATIONGROUP
737-8, 737-9 Airplanes with a door-mounted escape slide for the
forward and aft entry doors on the left side and the forward and aft
galley service doors on the right side.
-1
Airplane Models:
737-8, 737-9
GroupVariable Number
11A001 - 1A002
11A004 - 1A062
11A190 - 1A197
11A201 - 1A209
11A211
11A301 - 1A318
11A401 - 1A414
11A451 - 1A467
11A476 - 1A482
11A495 - 1A496
11A498
11A501 - 1A502
11A521 - 1A523
11A531
GroupVariable Number
11A541 - 1A547
11A601 - 1A614
11A628
11A676 - 1A691
11A726 - 1A730
11A741 - 1A743
11A751 - 1A757
11A801
11A851 - 1A876
11A878 - 1A880
11A916 - 1A921
11A926 - 1A931
11A943
11A951 - 1A961
GroupVariable Number
11B001 - 1B012
11B014
11B018 - 1B020
11B026
11B101 - 1B142
11B201 - 1B206
11B251 - 1B266
11B326 - 1B327
11B376 - 1B380
11B386 - 1B389
11B396
11B401
11B436
11B491 - 1B494
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 27, 2021
737-25-1866 RBRevision 2: July 19, 2024
8 of 16
REQUIREMENTS BULLETIN 737-25-1866

### Page 9

GroupVariable Number
11B511 - 1B512
11B516 - 1B517
11B521 - 1B522
11B531 - 1B532
11B540 - 1B541
11B566 - 1B569
11B576 - 1B578
11B601
11B635 - 1B636
11B651 - 1B657
11B701
11B801 - 1B806
11B811 - 1B815
11B820 - 1B823
11B825
11B930 - 1B934
11C001 - 1C005
11C201 - 1C202
11C207
11C221 - 1C223
11C237
GroupVariable Number
11C256 - 1C259
11C301 - 1C305
11C326 - 1C335
11C401 - 1C404
11C451
11C453
11C501 - 1C510
11C690
11C701 - 1C717
11C720
11C826 - 1C827
11C946 - 1C950
11D001 - 1D004
11D051 - 1D063
11D101 - 1D130
11D201 - 1D202
11D251 - 1D253
11D401 - 1D403
11D426 - 1D431
11D436
11D466 - 1D469
GroupVariable Number
11D503
11D521
11D601 - 1D606
11D701
11J021 - 1J022
11J041 - 1J042
11J066 - 1J067
11J101 - 1J108
11J110 - 1J111
11J301
11J401 - 1J402
11J601
11K003
11K043
11K303
11K306
11K701 - 1K703
11L001
11L268
11L402 - 1L404
11L451 - 1L463
B. Spares Affected
Examine your spares supply for the parts or components identified below. If any parts or components
are found, refer to PART 3 of WORK INSTRUCTIONS for the recommended action.
Part Number
5A3307-7
2. CONCURRENT REQUIREMENTS
None.
3. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related
to Requirements Bulletin 737-25-1866 RB. The Airworthiness Directive will make the compliance tasks and
times given in Requirements Bulletin 737-25-1866 RB mandatory.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 27, 2021
737-25-1866 RBRevision 2: July 19, 2024
9 of 16
REQUIREMENTS BULLETIN 737-25-1866

### Page 10

Federal Aviation Administration (FAA) Airworthiness Directive AD 2023-09-04 is related to this bulletin. The
effective date of AD 2023-09-04 is June 29, 2023.
Accomplish the required action(s), based on the applicable condition(s) in Table 1 through Table 4, in
accordance with Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Table 1: WORK PACKAGE 1: FORWARD ENTRY DOOR, LEFT SIDE - ESCAPE SLIDE ASSEMBLY
INSPECTION
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Within 3 years after the
Original Issue date of
Requirements Bulletin
737-25-1866 RB.
Inspect the escape slide
assembly to determine
part number.
All Airplanes
-Before further flight.Replace with escape
slide assembly P/N
5A3307-9 or P/N 5A3307-
701.
CONDITION 1: ESCAPE
SLIDE ASSEMBLY P/N
5A3307-7 FOUND
--No further action is re-
quired for this escape
slide assembly.
CONDITION 2: ESCAPE
SLIDE ASSEMBLY P/N
5A3307-7 NOT FOUND
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 27, 2021
737-25-1866 RBRevision 2: July 19, 2024
10 of 16
REQUIREMENTS BULLETIN 737-25-1866

### Page 11

Table 2: WORK PACKAGE 2: FORWARD GALLEY SERVICE DOOR, RIGHT SIDE - ESCAPE SLIDE
ASSEMBLY INSPECTION
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Within 3 years after the
Original Issue date of
Requirements Bulletin
737-25-1866 RB.
Inspect the escape slide
assembly to determine
part number.
All Airplanes
-Before further flight.Replace with escape
slide assembly P/N
5A3307-9 or P/N 5A3307-
701.
CONDITION 1: ESCAPE
SLIDE ASSEMBLY P/N
5A3307-7 FOUND
--No further action is re-
quired for this escape
slide assembly.
CONDITION 2: ESCAPE
SLIDE ASSEMBLY P/N
5A3307-7 NOT FOUND
Table 3: WORK PACKAGE 3: AFT ENTRY DOOR, LEFT SIDE - ESCAPE SLIDE ASSEMBLY INSPEC-
TION
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Within 3 years after the
Original Issue date of
Requirements Bulletin
737-25-1866 RB.
Inspect the escape slide
assembly to determine
part number.
All Airplanes
-Before further flight.Replace with escape
slide assembly P/N
5A3307-9 or P/N 5A3307-
701.
CONDITION 1: ESCAPE
SLIDE ASSEMBLY P/N
5A3307-7 FOUND
--No further action is re-
quired for this escape
slide assembly.
CONDITION 2: ESCAPE
SLIDE ASSEMBLY P/N
5A3307-7 NOT FOUND
Table 4: WORK PACKAGE 4: AFT GALLEY SERVICE DOOR, RIGHT SIDE - ESCAPE SLIDE ASSEMBLY
INSPECTION
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Within 3 years after the
Original Issue date of
Requirements Bulletin
737-25-1866 RB.
Inspect the escape slide
assembly to determine
part number.
All Airplanes
-Before further flight.Replace with escape
slide assembly P/N
5A3307-9 or P/N 5A3307-
701.
CONDITION 1: ESCAPE
SLIDE ASSEMBLY P/N
5A3307-7 FOUND
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 27, 2021
737-25-1866 RBRevision 2: July 19, 2024
11 of 16
REQUIREMENTS BULLETIN 737-25-1866

### Page 12

Table 4: WORK PACKAGE 4: AFT GALLEY SERVICE DOOR, RIGHT SIDE - ESCAPE SLIDE ASSEMBLY
INSPECTION
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
--No further action is re-
quired for this escape
slide assembly.
CONDITION 2: ESCAPE
SLIDE ASSEMBLY P/N
5A3307-7 NOT FOUND
4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
In addition, the Manager of the FAA Continued Operational Safety Branch approves accomplishment of
the inspection and replacement of the escape slides defined in this Requirements Bulletin revision as an
alternative method of compliance to the Boeing Special Attention Requirements Bulletin 737-25-1866 RB,
Revision 1, dated April 11, 2022 specified in paragraph (g) of AD 2023-09-04. All provisions of AD 2023-09-04
that are not specifically referenced in the above statement remain fully applicable and must be complied
with accordingly.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 27, 2021
737-25-1866 RBRevision 2: July 19, 2024
12 of 16
REQUIREMENTS BULLETIN 737-25-1866

### Page 13

5.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. For the related SB, some locations are marked RC Start and RC
End to identify the requirements that are restated from the RB. For the related SB,
the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD.
Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations
to steps between RC Start and RC End, including substeps and identified figures.
For the related SB, the steps not between RC Start and RC End may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC; this is provided that the
steps between RC Start and RC End, including sub-steps and identified figures, can
still be done as specified, and the airplane can be put back in an airworthy condition.
Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for airframe maintenance tasks are included in Chapter 20 of
737-7/8/8200/9/10 Aircraft Maintenance Manual (AMM).
5. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
6. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 27, 2021
737-25-1866 RBRevision 2: July 19, 2024
13 of 16
REQUIREMENTS BULLETIN 737-25-1866

### Page 14

7. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION,
do all of the ACTION numbers for that CONDITION or OPTION.
B. WORK INSTRUCTIONS
Actions Required for Compliance
1. Requirements:
TABLE 1: WORK PACKAGE 1: FORWARD ENTRY DOOR, LEFT SIDE - ESCAPE SLIDE ASSEMBLY
INSPECTION
Refer to the listed proce-
dures in SB 737-25-1866
Original Issue or later
approved revisions as
an accepted procedure
Method of ComplianceActionCondition
PART 1 - OPEN ACCESS
AND ESCAPE SLIDE AS-
SEMBLY PART NUMBER
INSPECTION
-Inspect the escape slide
assembly to determine
part number.
All Airplanes
PART 2 - ESCAPE SLIDE
ASSEMBLY REPLACE-
MENT
-Replace with escape slide
assembly P/N 5A3307-9
or P/N 5A3307-701.
CONDITION 1: ESCAPE
SLIDE ASSEMBLY P/N
5A3307-7 FOUND
PART 4 - CLOSE AC-
CESS
-
PART 4 - CLOSE AC-
CESS
-No further action is re-
quired for this escape
slide assembly.
CONDITION 2: ESCAPE
SLIDE ASSEMBLY P/N
5A3307-7 NOT FOUND
TABLE 2: WORK PACKAGE 2: FORWARD GALLEY SERVICE DOOR, RIGHT SIDE - ESCAPE SLIDE
ASSEMBLY INSPECTION
Refer to the listed proce-
dures in SB 737-25-1866
Original Issue or later
approved revisions as
an accepted procedure
Method of ComplianceActionCondition
PART 1 - OPEN ACCESS
AND ESCAPE SLIDE AS-
SEMBLY PART NUMBER
INSPECTION
-Inspect the escape slide
assembly to determine
part number.
All Airplanes
PART 2 - ESCAPE SLIDE
ASSEMBLY REPLACE-
MENT
-Replace with escape slide
assembly P/N 5A3307-9
or P/N 5A3307-701.
CONDITION 1: ESCAPE
SLIDE ASSEMBLY P/N
5A3307-7 FOUND
PART 4 - CLOSE AC-
CESS
-
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 27, 2021
737-25-1866 RBRevision 2: July 19, 2024
14 of 16
REQUIREMENTS BULLETIN 737-25-1866

### Page 15

TABLE 2: WORK PACKAGE 2: FORWARD GALLEY SERVICE DOOR, RIGHT SIDE - ESCAPE SLIDE
ASSEMBLY INSPECTION
Refer to the listed proce-
dures in SB 737-25-1866
Original Issue or later
approved revisions as
an accepted procedure
Method of ComplianceActionCondition
PART 4 - CLOSE AC-
CESS
-No further action is re-
quired for this escape
slide assembly.
CONDITION 2: ESCAPE
SLIDE ASSEMBLY P/N
5A3307-7 NOT FOUND
TABLE 3: WORK PACKAGE 3: AFT ENTRY DOOR, LEFT SIDE - ESCAPE SLIDE ASSEMBLY INSPECTION
Refer to the listed proce-
dures in SB 737-25-1866
Original Issue or later
approved revisions as
an accepted procedure
Method of ComplianceActionCondition
PART 1 - OPEN ACCESS
AND ESCAPE SLIDE AS-
SEMBLY PART NUMBER
INSPECTION
-Inspect the escape slide
assembly to determine
part number.
All Airplanes
PART 2 - ESCAPE SLIDE
ASSEMBLY REPLACE-
MENT
-Replace with escape slide
assembly P/N 5A3307-9
or P/N 5A3307-701.
CONDITION 1: ESCAPE
SLIDE ASSEMBLY P/N
5A3307-7 FOUND
PART 4 - CLOSE AC-
CESS
-
PART 4 - CLOSE AC-
CESS
-No further action is re-
quired for this escape
slide assembly.
CONDITION 2: ESCAPE
SLIDE ASSEMBLY P/N
5A3307-7 NOT FOUND
TABLE 4: WORK PACKAGE 4: AFT GALLEY SERVICE DOOR, RIGHT SIDE - ESCAPE SLIDE ASSEMBLY
INSPECTION
Refer to the listed proce-
dures in SB 737-25-1866
Original Issue or later
approved revisions as
an accepted procedure
Method of ComplianceActionCondition
PART 1 - OPEN ACCESS
AND ESCAPE SLIDE AS-
SEMBLY PART NUMBER
INSPECTION
-Inspect the escape slide
assembly to determine
part number.
All Airplanes
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 27, 2021
737-25-1866 RBRevision 2: July 19, 2024
15 of 16
REQUIREMENTS BULLETIN 737-25-1866

### Page 16

TABLE 4: WORK PACKAGE 4: AFT GALLEY SERVICE DOOR, RIGHT SIDE - ESCAPE SLIDE ASSEMBLY
INSPECTION
Refer to the listed proce-
dures in SB 737-25-1866
Original Issue or later
approved revisions as
an accepted procedure
Method of ComplianceActionCondition
PART 2 - ESCAPE SLIDE
ASSEMBLY REPLACE-
MENT
-Replace with escape slide
assembly P/N 5A3307-9
or P/N 5A3307-701.
CONDITION 1: ESCAPE
SLIDE ASSEMBLY P/N
5A3307-7 FOUND
PART 4 - CLOSE AC-
CESS
-
PART 4 - CLOSE AC-
CESS
-No further action is re-
quired for this escape
slide assembly.
CONDITION 2: ESCAPE
SLIDE ASSEMBLY P/N
5A3307-7 NOT FOUND
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 27, 2021
737-25-1866 RBRevision 2: July 19, 2024
16 of 16
REQUIREMENTS BULLETIN 737-25-1866

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
