# Boeing Alert Requirements Bulletin 737-34A3572 RB: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2023-1993; AD 2025-02-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Requirements Bulletin 737-34A3572 RB](https://openairdocs.org/service-documents/boeing/737-34a3572-rb.md)
- Title as filed: 737-34A3572 RB
- Pages: 13
- PDF: https://openairdocs.org/files/sha256/64/75/647586e4a62d58822d94d751ff0e8c92313f3811c35a16b7ce0b0988a8f9fc08
- Page: https://openairdocs.org/service-documents/boeing/737-34a3572-rb/file/647586e4a62d

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Requirements Bulletin
ALERT
Number: 737-34A3572 RB
Original Issue: October 15, 2020
ATA System: 3431
SUBJECT: NAVIGATION - Instrument Landing System - Multi-Mode Receiver Software Change
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2020 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: October 15, 2020
737-34A3572 RB
1 of 13
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 15, 2020
737-34A3572 RB
2 of 13
REQUIREMENTS BULLETIN 737-34A3572
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
1. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
A. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
B. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
A. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
B. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 15, 2020
737-34A3572 RB
3 of 13
REQUIREMENTS BULLETIN 737-34A3572
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 15, 2020
737-34A3572 RB
4 of 13
REQUIREMENTS BULLETIN 737-34A3572
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
737
Requirements Bulletin
ALERT
Number: 737-34A3572 RB
Original Issue: October 15, 2020
ATA System: 3431
SUBJECT: NAVIGATION - Instrument Landing System - Multi-Mode Receiver Software Change
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING
PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN
(RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL
TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB
WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
1. Effectivity
A. Airplanes
This bulletin is applicable to 737-8, 737-9 Airplane(s), line number(s) 6973, 6983, 6990, 6995,
7003, 7008, 7015, 7018, 7028, 7038, 7043, 7045, 7048, 7050, 7053, 7064, 7068, 7070, 7085,
7088, 7093, 7095-7096, 7103, 7108, 7118, 7125, 7128, 7132-7133, 7140, 7147-7148, 7155, 7158,
7160, 7165-7166, 7168, 7175, 7180-7181, 7185-7186, 7190, 7192-7193, 7196, 7200, 7203, 7208,
7210-7211, 7215-7216, 7220, 7222-7223, 7225, 7228, 7231, 7233, 7237-7238, 7240, 7246, 7248,
7250, 7252, 7255, 7261, 7265, 7268, 7270-7271, 7278, 7282-7283, 7286, 7290-7291, 7293,
7295-7296, 7298, 7301, 7303, 7306, 7310-7311, 7313, 7315, 7320, 7325, 7330-7331, 7333, 7336,
7340, 7345, 7348, 7353, 7355-7356, 7365-7366, 7368, 7370, 7373, 7375, 7381, 7384-7385,
7388-7390, 7393, 7395, 7400-7401, 7403, 7405-7406, 7410-7411, 7413, 7416, 7419, 7435 in 3
Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane
applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through
9 inclusive.
DESCRIPTIONCONFIGURATIONGROUP
Airplanes with Rockwell Collins Multi-Mode Receivers (MMRs)
GLU-2100 installed by Service Bulletin (SB) 737-34-3404.
-1
Airplanes with Rockwell Collins MMRs GLU-2100 installed by SB
737-34-3405.
-2
Airplanes with Rockwell Collins MMRs GLU-2100 installed in
production.
-3
Airplane Models:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 15, 2020
737-34A3572 RB
5 of 13

### Page 6

737-8, 737-9
GroupVariable Number
31A211
31A315 - 1A318
11A544 - 1A545
21A614
21A756 - 1A757
31A856 - 1A866
31A918 - 1A919
31A929
31A943
31A955 - 1A956
31B007 - 1B011
31B115 - 1B124
31B206
GroupVariable Number
21B491 - 1B494
21B511 - 1B512
21B521 - 1B522
21B531
31B566 - 1B569
31B576 - 1B578
31B652 - 1B657
31B701
31B930 - 1B934
31C201 - 1C202
31C304 - 1C305
31C327 - 1C335
31C501 - 1C510
GroupVariable Number
31C690
31C701 - 1C711
31C826 - 1C827
31C946 - 1C947
31D051 - 1D056
31D251 - 1D253
11D401
31D466
31J041 - 1J042
31J066 - 1J067
31J101 - 1J102
31J401 - 1J402
--
B. Spares Affected
None.
2. CONCURRENT REQUIREMENTS
The service bulletin(s) listed below must be done before or at the same time as this service bulletin:
Group 1:
DescriptionService BulletinCompany
NAVIGATION - Instrument Landing System -
Multi-Mode Receiver Replacement
737-34-3404 Original IssueBoeing
Group 2:
DescriptionService BulletinCompany
NAVIGATION - Instrument Landing System -
Multi-Mode Receiver Replacement
737-34-3405 Original IssueBoeing
Group 3:
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 15, 2020
737-34A3572 RB
6 of 13
REQUIREMENTS BULLETIN 737-34A3572
ALERTALERT

### Page 7

3. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
Requirements Bulletin 737-34A3572 RB. The Airworthiness Directive will make the compliance tasks and
times given in Requirements Bulletin 737-34A3572 RB mandatory.
Federal Aviation Administration (FAA) Airworthiness Directive AD 2020-03-20 is related to Requirements
Bulletin 737-34A3572 RB. The effective date of AD 2020-03-20 is February 18, 2020.
Accomplish the required actions, based on the applicable conditions in Tables 1 and 2, in accordance with
Accomplishment Instructions.
Group 1-2:
Table 1: Multi-Mode Receiver Software Installation and Configuration Check
Repeat
Interval
Compliance TimeActionCondition
-Within 12 months af-
ter the original issue
date of Requirements
Bulletin 737-34A3572
RB.
ACTION 1: Do all applicable ACCOMPLISHMENT
INSTRUCTIONS actions identified in the service
bulletin specified in CONCURRENT REQUIRE-
MENTS.
All Airplanes
-ACTION 2: Install the Multi-Mode Receiver (MMR)
Operational Program Software (OPS) part number
COL4C-0087-0003 or later approved software part
number in MMR 1 and MMR 2.
-ACTION 3: Install the MMR Option Selection
Software (OSS) part number BCG27-U000-0730
or later approved software part number in MMR 1
and MMR 2.
-ACTION 4: Do the software configuration check
and make sure that software part number COL4C-
0087-0003 or later approved software part number
is installed in MMR 1 and MMR 2. If software part
number COL4C-0087-0003 or later approved
software part number is not shown as installed in
MMR 1 and MMR 2, do corrective action(s) until
the software part number is shown as installed in
MMR 1 and MMR 2.
-ACTION 5: Do the software configuration check
and make sure that software part number BCG27-
U000-0730 or later approved software part number
is installed in MMR 1 and MMR 2. If software part
number BCG27-U000-0730 or later approved
software part number is not shown as installed in
MMR 1 and MMR 2, do corrective action(s) until
the software part number is shown as installed in
MMR 1 and MMR 2.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 15, 2020
737-34A3572 RB
7 of 13
REQUIREMENTS BULLETIN 737-34A3572
ALERTALERT

### Page 8

Group 3:
Table 2: Multi-Mode Receiver Software Installation and Configuration Check
Repeat
Interval
Compliance TimeActionCondition
-Within 12 months af-
ter the original issue
date of Requirements
Bulletin 737-34A3572
RB.
ACTION 1: Install the Multi-Mode Receiver (MMR)
Operational Program Software (OPS) part number
COL4C-0087-0003 or later approved software part
number in MMR 1 and MMR 2.
All Airplanes
-ACTION 2: Install the MMR Option Selection
Software (OSS) part number BCG27-U000-0730
or later approved software part number in MMR 1
and MMR 2.
-ACTION 3: Do the software configuration check
and make sure that software part number COL4C-
0087-0003 or later approved software part number
is installed in MMR 1 and MMR 2. If software part
number COL4C-0087-0003 or later approved
software part number is not shown as installed in
MMR 1 and MMR 2, do corrective action(s) until
the software part number is shown as installed in
MMR 1 and MMR 2.
-ACTION 4: Do the software configuration check
and make sure that software part number BCG27-
U000-0730 or later approved software part number
is installed in MMR 1 and MMR 2. If software part
number BCG27-U000-0730 or later approved
software part number is not shown as installed in
MMR 1 and MMR 2, do corrective action(s) until
the software part number is shown as installed in
MMR 1 and MMR 2.
4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This document and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 15, 2020
737-34A3572 RB
8 of 13
REQUIREMENTS BULLETIN 737-34A3572
ALERTALERT

### Page 9

In addition, the Manager of FAA Seattle Aircraft Certification Office approves the action (i.e. inspection or
modification) defined in this requirements bulletin as an alternative method of compliance to the requirements
of paragraph (g) of AD 2020-03-20. For operators with common flight crew procedures used for multiple
affected airplanes in their fleet, operators must update the software on all of their affected airplanes prior
to removing the limitation from the Airplane Flight Manuals. All provisions of AD 2020-03-20 that are not
specifically referenced in the above statement remain fully applicable and must be complied with.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 15, 2020
737-34A3572 RB
9 of 13
REQUIREMENTS BULLETIN 737-34A3572
ALERTALERT

### Page 10

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 15, 2020
737-34A3572 RB
10 of 13
REQUIREMENTS BULLETIN 737-34A3572
ALERTALERT
BLANK PAGE

### Page 11

5.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. For the related SB, some locations are marked RC Start and RC
End to identify the requirements that are restated from the RB. For the related SB,
the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD.
Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations
to steps between RC Start and RC End, including substeps and identified figures.
For the related SB, the steps not between RC Start and RC End may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC; this is provided that the
steps between RC Start and RC End, including sub-steps and identified figures, can
still be done as specified, and the airplane can be put back in an airworthy condition.
Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. Later approved software is only software that is approved by Boeing as a replacement
for the software specified in this bulletin and approved as part of the type design by
the Federal Aviation Administration (FAA) after issuance of this bulletin Original Issue
date.
5. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 15, 2020
737-34A3572 RB
11 of 13
REQUIREMENTS BULLETIN 737-34A3572
ALERTALERT

### Page 12

B. WORK INSTRUCTIONS
Actions Required for Compliance
1. Requirements:
Group 1-2:
Table 1: Multi-Mode Receiver Software Installation and Configuration Check
Refer to the listed proce-
dures in SB 737-34A3572
Original Issue or later ap-
proved revisions as an
accepted procedure.
Method of
Compliance
ActionCondition
--ACTION 1: Do all applicable ACCOMPLISH-
MENT INSTRUCTIONS actions identified
in the service bulletin specified in CONCUR-
RENT REQUIREMENTS.
All Airplanes
PART 1: MMR OPS Installa-
tion
-ACTION 2: Install the Multi-Mode Receiver
(MMR) Operational Program Software
(OPS) part number COL4C-0087-0003 or
later approved software part number in
MMR 1 and MMR 2.
PART 2: MMR OSS Installa-
tion
-ACTION 3: Install the MMR Option Selection
Software (OSS) part number BCG27-U000-
0730 or later approved software part num-
ber in MMR 1 and MMR 2.
PART 3: MMR OPS Config-
uration Check
-ACTION 4: Do the software configuration
check and make sure that software part
number COL4C-0087-0003 or later ap-
proved software part number is installed in
MMR 1 and MMR 2. If software part number
COL4C-0087-0003 or later approved soft-
ware part number is not shown as installed
in MMR 1 and MMR 2, do corrective ac-
tion(s) until the software part number is
shown as installed in MMR 1 and MMR 2.
PART 4: MMR OSS Config-
uration Check
-ACTION 5: Do the software configuration
check and make sure that software part
number BCG27-U000-0730 or later ap-
proved software part number is installed in
MMR 1 and MMR 2. If software part number
BCG27-U000-0730 or later approved soft-
ware part number is not shown as installed
in MMR 1 and MMR 2, do corrective ac-
tion(s) until the software part number is
shown as installed in MMR 1 and MMR 2.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 15, 2020
737-34A3572 RB
12 of 13
REQUIREMENTS BULLETIN 737-34A3572
ALERTALERT

### Page 13

Group 3:
Table 2: Multi-Mode Receiver Software Installation and Configuration Check
Refer to the listed proce-
dures in SB 737-34A3572
Original Issue or later ap-
proved revisions as an
accepted procedure.
Method of
Compliance
ActionCondition
PART 1: MMR OPS Installa-
tion
-ACTION 1: Install the Multi-Mode Receiver
(MMR) Operational Program Software
(OPS) part number COL4C-0087-0003 or
later approved software part number in
MMR 1 and MMR 2.
All Airplanes
PART 2: MMR OSS Installa-
tion
-ACTION 2: Install the MMR Option Selection
Software (OSS) part number BCG27-U000-
0730 or later approved software part num-
ber in MMR 1 and MMR 2.
PART 3: MMR OPS Config-
uration Check
-ACTION 3: Do the software configuration
check and make sure that software part
number COL4C-0087-0003 or later ap-
proved software part number is installed in
MMR 1 and MMR 2. If software part number
COL4C-0087-0003 or later approved soft-
ware part number is not shown as installed
in MMR 1 and MMR 2, do corrective ac-
tion(s) until the software part number is
shown as installed in MMR 1 and MMR 2.
PART 4: MMR OSS Config-
uration Check
-ACTION 4: Do the software configuration
check and make sure that software part
number BCG27-U000-0730 or later ap-
proved software part number is installed in
MMR 1 and MMR 2. If software part number
BCG27-U000-0730 or later approved soft-
ware part number is not shown as installed
in MMR 1 and MMR 2, do corrective ac-
tion(s) until the software part number is
shown as installed in MMR 1 and MMR 2.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 15, 2020
737-34A3572 RB
13 of 13
REQUIREMENTS BULLETIN 737-34A3572
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
