# Boeing Alert Service Bulletin 737-52A1100: U.S. DOT/FAA - Service Bulletin

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0855; AD 2013-09-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 737-52A1100](https://openairdocs.org/service-documents/boeing/737-52a1100.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin
- Pages: 178
- PDF: https://openairdocs.org/files/sha256/46/ce/46ce807b4f73b63f8ba72dbde910e318ce2cdb687c283c9a86b53295d8d6e4bd
- Page: https://openairdocs.org/service-documents/boeing/737-52a1100/file/46ce807b4f73

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-52A1100
Original Issue: August 25, 1988
Revision 5: February 14, 2011
ATA System: 5231
SUBJECT: DOORS - Forward Cargo - Lower Forward and Aft Corner Inspection, Modification and
Replacement
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 1989 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
1 of 178
5.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
2 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ...................................................... 9
1. PLANNING INFORMATION ........................................ 1 3
A. Effectivity ............................................... 1 3
1. Airplanes ............................................ 1 3
2. Spares Affected ........................................ 2 9
B. Concurrent Requirements ...................................... 2 9
C. Reason ................................................ 3 0
D. Description .............................................. 3 2
E. Compliance .............................................. 3 5
F. Approval ............................................... 4 2
G. Manpower .............................................. 4 3
H. Weight and Balance Changes .................................... 4 4
I. Electrical Load Data ......................................... 4 4
J. References .............................................. 4 5
1. Existing Data: ......................................... 4 5
2. Data supplied with this Service Bulletin: ........................... 4 5
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 4 5
K. Publications Affected ........................................ 4 5
L. Interchangeability and Intermixability of Parts ........................... 4 6
2. MATERIAL INFORMATION ........................................ 4 7
A. Material - Price and Availability ................................... 4 7
B. Industry Support Information .................................... 4 9
C. Parts Necessary For Each Airplane ................................. 4 9
1. Kits/Parts: ........................................... 4 9
2. Parts and Materials Supplied by the Operator: ........................ 5 8
3. Parts Modified and Reidentified: ............................... 5 9
4. Parts Removed and Not Replaced: .............................. 5 9
D. Parts Necessary to Change Spares ................................. 5 9
E. Special Tooling - Price and Availability ............................... 6 0
F. Special Tooling Necessary to do this Service Bulletin ....................... 6 0
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 6 1
A. GENERAL INFORMATION ..................................... 6 1
B. WORK INSTRUCTIONS ....................................... 6 2
FIGURE 1: INSPECTION .......................................... 7 2
FIGURE 2: FRAME REPLACEMENT AND PREVENTIVE MODIFICATION - GROUP 1 THROUGH GROUP
5 AIRPLANES ......................................... 7 7
FIGURE 3: FRAME REPLACEMENT AND PREVENTIVE MODIFICATION - GROUP 6 AIRPLANES . 102
FIGURE 4: PREVENTIVE MODIFICATION - GROUP 1 THROUGH GROUP 5 AIRPLANES ..... 1 2 1
FIGURE 5: LEVELING COMPOUND INSTALLATION .......................... 1 4 0
FIGURE 6: OUTER "T" CHORD REPAIR ................................ 1 4 2
FIGURE 7: OPTIONAL ACCESS HOLE FOR FRAME REPLACEMENT - GROUP 1 THROUGH 5
AIRPLANES .......................................... 1 4 7
FIGURE 8: INSTALL OPTIONAL "C" CHANNEL ............................. 1 5 0
FIGURE 9: MAKE A LARGE ACCESS COVER ............................. 1 5 3
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
3 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 4

FIGURE 10: MAKE OPTIONAL "C" CHANNEL .............................. 1 5 4
FIGURE 11: FORWARD CARGO DOOR - LOWER CROSS BEAM - FORWARD END - SUPPLEMENTAL
STRUCTURAL INSPECTION FOR AIRPLANES WITH A CROSS BEAM DOUBLER INSTALLED
AND A REPAIRED "T"-CHORD (WITH A "T"-CHORD SPLICE) .............. 1 5 5
FIGURE 12: FORWARD CARGO DOOR - LOWER CROSS BEAM - AFT END - SUPPLEMENTAL
STRUCTURAL INSPECTION FOR AIRPLANES WITH A CROSS BEAM DOUBLER INSTALLED
AND A REPAIRED "T"-CHORD (WITH "T"-CHORD SPLICE) ............... 1 5 8
FIGURE 13: FORWARD CARGO DOOR - LOWER CROSS BEAM - FORWARD END - SUPPLEMENTAL
STRUCTURAL INSPECTION FOR AIRPLANES WITH A CROSS BEAM DOUBLER AND A
WHOLE "T"-CHORD INSTALLED (NO "T"-CHORD SPLICE) ............... 1 6 1
FIGURE 14: FORWARD CARGO DOOR - LOWER CROSS BEAM - AFT END - SUPPLEMENTAL
STRUCTURAL INSPECTION FOR AIRPLANES WITH A CROSS BEAM DOUBLER AND A
WHOLE "T"-CHORD INSTALLED (NO "T"-CHORD SPLICE) ............... 1 6 4
FIGURE 15: FORWARD CARGO DOOR - LOWER CROSS BEAM - FORWARD END - SUPPLEMENTAL
STRUCTURAL INSPECTION FOR AIRPLANES WITH A CROSS BEAM C-CHANNEL
INSTALLED AND A REPAIRED "T"-CHORD (WITH A "T"-CHORD SPLICE) ....... 1 6 7
FIGURE 16: FORWARD CARGO DOOR - LOWER CROSS BEAM - AFT END - SUPPLEMENTAL
STRUCTURAL INSPECTION FOR AIRPLANES WITH A CROSS BEAM C-CHANNEL
INSTALLED AND A REPAIRED "T"-CHORD (WITH "T"-CHORD SPLICE) ........ 1 7 0
FIGURE 17: FORWARD CARGO DOOR - LOWER CROSS BEAM - FORWARD END - SUPPLEMENTAL
STRUCTURAL INSPECTION FOR AIRPLANES WITH A CROSS BEAM C-CHANNEL AND A
WHOLE "T"-CHORD INSTALLED (NO "T"-CHORD SPLICE) ............... 1 7 3
FIGURE 18: FORWARD CARGO DOOR - LOWER CROSS BEAM - AFT END - SUPPLEMENTAL
STRUCTURAL INSPECTION FOR AIRPLANES WITH A CROSS BEAM C-CHANNEL AND A
WHOLE "T"-CHORD INSTALLED (NO "T"-CHORD SPLICE) ............... 1 7 6
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
4 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 5

Commercial 
Airplanes
737
Service Bulletin
ALERT
Revision Transmittal SheetNumber: 737-52A1100Original Issue: August 25, 1988
Revision 5: February 14, 2011
ATA System: 5231
SUBJECT: DOORS - Forward Cargo - Lower Forward and Aft Corner Inspection, Modification and
Replacement
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
More work is necessary on airplanes that had the frame replaced as an alternative to the installation of the
modification angle, in accordance with the initial release, revision 1, 2, 3 and 4 of this service bulletin. Do a High
Frequency Eddy Current (HFEC) inspection of the lower frame and number 5 cross-beam in accordance with
this service bulletin at the revised time specified in Paragraph 1.E., Compliance.
More work is necessary for airplanes that have a preventive modification or a lower beam outer "T" chord repair
installed in accordance with this Service Bulletin. Do the supplemental structural inspections in accordance with
Revision 5 of this Service Bulletin.
No airplanes were added or deleted from the service bulletin effectivity.
REASON FOR REVISION
This revision is sent to remove the option for repeat inspections and replace the visual beam inspection with a
HFEC inspection. This revision is also sent to install preventive angle 65C27804-4 if the frame has been previously
replaced. Instructions to install the access cover are changed to use permanent fasteners.
These sections were changed:
1. Paragraph 1.F., Approval - More data is added and some data is changed.
2. Summary Compliance and Paragraph 1.J.1., Existing Data - Added and changed Airworthiness Directive
and Supplemental Structural Inspection Document references.
3. Paragraph 1.E., Compliance - Adjusted the compliance times, removed the data for repeat inspections,
added 2 more rows to table 3, added table 4 and also added an Airworthiness Directive reference.
4. Summary Action and Paragraph 1.D., Description - Removed all the repeat inspection instructions and
change visual inspection to a High Frequency Eddy Current (HFEC) inspection of the web and the outer
'T' chord of the lower cross beam.
5. Paragraph 1.J.1., Existing Data - Added Non-Destructive Test (NDT) manual figure references.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
5 of 178

### Page 6

6. Paragraph 1.K., Publications Affected - A Damage Tolerance Based Structural Inspections statement is
added.
7. Paragraph 3.A., Accomplishment Instructions - A note to install shims in all gaps greater than 0.005 inches
is added to the General Notes. Also, a note regarding the use of the terms "refer to" and "in accordance
with" is added to the General Notes.
8. Paragraph 3.B., Work Instructions - Added revision 4 to Part I and removed all the repeat inspection
instructions.
9. Paragraph 2.C.2., Parts and Materials Supplied by the Operator - Changed the part number of a blind bolt
and adjust the quantities of some blind rivets.
10. Paragraph 2.D., Parts Necessary to Change Spares - Changed three part numbers.
11. FIGURE 1 - Added references for step 1, open forward cargo door.
12. Removed 'Detail III' and change 'Detail I', 'Detail II' and two cross section views on the illustrations of FIGURE
1 to relate to the changed Step table. The Steps are changed to replace detail visual inspections with HFEC
inspections.
13. Changed the fasteners with code A in FIGURE 1 from temporary to permanent ones.
14. FIGURE 1, FIGURE 2, and FIGURE 4 - The term "in accordance with" is used where another service bulletin
is referenced in the illustrations.
15. Added notes in FIGURE 2 and FIGURE 4 which are related to the changes in FIGURE 1.
16. Changed the hole diameter for the fastener with code V in FIGURE 2 and FIGURE 3 and added an alternative
fastener for the same code.
17. Paragraph 1.G., Manpower - Adjusted six values in the table.
18. Paragraph 1.D., Description and Paragraph 1.J.1., Existing Data - Added reference to service bulletin
737-52-1149.
19. Summary Background and Paragraph 1.C., Reason - Added information to give details of the causes and
consequences of the cracks in the door. Also, added reference to Service Bulletin 737-52-1149.
20. Paragraph 3.B., Work Instructions - Part V is added to provide instructions for doing Supplemental Structural
Inspections. Also, added instructions to Part I and Part V to do inspections in accordance with Service
Bulletin 737-52-1149, if cracks are found.
21. FIGURE 11 through FIGURE 18 are added to provide Supplemental Structural Inspections.
The data given in Information Notice 737-52A1100 IN 07, 08 and 09 are included in this revision. IN 07 was sent
to change the part number of the blind rivets in Paragraph 2.C.2., Parts and Materials Supplied by the Operator.
IN08 was superseded by IN09. IN09 was sent to change rivet part numbers in Paragraph 2.C.2., Parts and
Materials Supplied by the Operator, FIGURE 2 and FIGURE 3. It was also sent to amend the drawing numbers
in Paragraph 2.D., Parts Necessary to Change Spares.
Paragraph 1.A., Effectivity, shows changes of airplane operators. Each operator should examine the Effectivity
paragraph for changes.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
6 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 7

Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
August 25, 1988Original Issue:
July 20, 1989Revision 1:
March 31, 1994Revision 2:
July 20, 2000Revision 3:
March 08, 2001Revision 4:
February 14, 2011Revision 5:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
7 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 8

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
8 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
737
Service Bulletin
ALERT
SummaryNumber: 737-52A1100Original Issue: August 25, 1988
Revision 5: February 14, 2011
ATA System: 5231
SUBJECT: DOORS - Forward Cargo - Lower Forward and Aft Corner Inspection, Modification and
Replacement
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
The Structures Task Group (STG) has examined the structural changes in this service bulletin, and recommends
that the changes be included on 737 airplanes.
As of 1994, several operators had reported cracks in the forward cargo door. The cracks were occurring in the
radius of the lower frames and in the web of the lower cross-beam. The cracks are caused by fatigue as a result
of cabin pressurization cycles. Cracks in the radius of the corner frames ranged from 3/8 of an inch to 17.5
inches. Cracks in the number 5 cross-beam web ranged from 3/8th of an inch to 3 inches. Airplanes had
accumulated 13,500 to 53,100 flight hours and 15,700 to 49,800 flight cycles. Undetected cracks could cause
problems with cabin pressure stability with the possibility of rapid decompression.
Since 1994, there have been three reports from three operators of cracking in the radius of the lower aft frame
on three airplanes. The airplanes were beyond the effectivity of the bulletin. The airplanes had accumulated
29,618 to 34,895 flight hours and 22,105 to 30,232 flight cycles.
Since the release of revision 2 of this bulletin, one operator experienced a rapid loss of cabin pressure during
descent as a result of a door crack. Also since the release of revision 2, a few operators have experienced
improper nesting when installing aft reinforcing angle 65C27804-4.
Since Revision 3, inputs from operators and further review of the bulletin has lead to some changes. A complete
list of the changes is given in Paragraph 1.C., Reason.
The inspection, repair and preventive modification of the number 4 cross beam on the forward cargo door is the
subject of the original issue of Boeing service bulletin 737-52-1149 .
Boeing Structural Item Interim Advisory SIIA 737-152 R1 is related to this service bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
9 of 178

### Page 10

Boeing Service Related Problem (SRP) 737-SRP-52-0057, 737-SRP-52-0070 and 737-SRP-52-0077 are related
to this service bulletin.
Boeing Fleet Team Digest 737 FTD 52-01001, 737 FTD 52-02001 and 737 FTD 52-04004 are related to this
service bulletin.
The Federal Aviation Administration (FAA) has issued an Airworthiness Directive (AD) which requires incorporation
of this service bulletin.
ACTION (PRR 35420-R)
On the forward cargo door, do a High Frequency Eddy Current (HFEC) inspection for cracks in the forward and
aft lower end frame. Also, do a HFEC inspection for cracks in the web and "T" chord (lower chord) of the lower
cross-beam.
If no cracks are found, install the frame preventive modification and the number 5 cross-beam modification/repair.
If cracks are found in the frame, replace the frame and install the frame preventive modification and the number
5 cross-beam repair/modification. If cracks are found in the number 5 cross-beam web, install the cross-beam
repair/modification and the frame preventive modification. Also, do the inspection of the number 4 cross beam
in accordance with the original issue of Boeing service bulletin 737-52-1149 at the time specified in Paragraph
1.E., Compliance . In addition, if the number 5 cross-beam outer chord (lower chord) is cracked, install the splice
repair in accordance with this bulletin.
If you replaced the lower forward or lower aft frame in accordance with the initial release, revision 1, or revision
2 of this service bulletin, do an HFEC inspection for cracks in the frame. If no cracks are found, install the frame
preventive modification. If cracks are found in the frame, replace the frame and install the frame preventive
modification. Also, do the inspection of the number 4 cross beam in accordance with the original issue of Boeing
service bulletin 737-52-1149 at the time specified in Paragraph 1.E., Compliance . If you installed aft frame
preventive modification angle 65C27804-4 in accordance with revision 2 or 3 of this bulletin, then you need to
do an inspection for proper fit. If the angle does not fit properly, you must replace it with a new angle. If you
installed a properly fitting frame angle and a number 5 cross-beam doubler on a corner of the cargo door in
accordance with the initial release, revision 1, 2, or 3 of this bulletin, then no action is necessary for the modified
corner.
It is recommended that Boeing service bulletin 737-52-1149 and this service bulletin be incorporated concurrently.
Since both service bulletins remove fasteners in the door frame and inner skin, concurrent incorporation will
minimize rework to these parts.
EFFECTIVITY
737-100/200/200C/300/400/500 series airplanes. Refer to Paragraph 1.A.1, Airplanes, for the list of affected
airplanes.
COMPLIANCE
Refer to Paragraph 1.E., Compliance.
Federal Aviation Administration (FAA) Airworthiness Directive AD 90-06-02 , AD 2000-07-06 , AD 2008-08-23
, AD 2008-09-13 and AD 98-11-04 R1 are related to this service bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
10 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 11 (OCR)

BOEING SERVICE BULLETIN 737-52A1100
ALERT  ALERT
INDUSTRY SUPPORT INFORMATION
This Service Bulletin was first issued before October of 1994. Therefore, there is no warranty statement included
in this revision.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
STA
540
STA
460
STA
360
CROSS BEAM
WEB CRACK
NUMBER 4
CROSS-BEAM
FRAME CRACK
17.5 INCH CRACK  OUTBOARD RADIUS
OUTBOARD OF SEAL  FWD E
NUMBER 5 (LOWER)  CROSS-BEAM  CROSS BEAM WEB CRACK  C15038
Original Issue: August 25, 1988
Revision 5: February 14, 2011  737-52A1100
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  11 of 178

### Page 12

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
12 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT
BLANK PAGE

### Page 13

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-52A1100
Original Issue: August 25, 1988
Revision 5: February 14, 2011
ATA System: 5231
SUBJECT: DOORS - Forward Cargo - Lower Forward and Aft Corner Inspection, Modification and
Replacement
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below. Refer to PRR 34328-R, PRR 35135-R and
PRR 35420-R for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
737-100/200/200C airplanes, line numbers 1 thru 348. These
airplanes are affected by Boeing service bulletin 737-51-1006 and
737-52-1065.
-1
737-200/200C airplanes, line numbers 349 thru 514. These airplanes
are affected by Boeing service bulletin 737-52-1065.
-2
737-200/200C/300 airplanes, line numbers 515 thru 1231.-3
737-200/300/400 airplanes, line numbers 1232 thru 1678. These
airplanes had the corner frames of the forward cargo door changed
from 7075 aluminum to 2024 aluminum with a small increase in
thickness.
-4
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
13 of 178

### Page 14

DESCRIPTIONCONFIGURATIONGROUP
737-300/400/500 airplanes, line numbers 1679 and 1681 thru 2414.
These airplanes are the same as Group 4 except the lanyard fittings
on the inner side of the forward cargo door are different.
-5
737-300/400/500 airplanes, line numbers 2415 and subsequent.
These airplanes have a different forward cargo door inner skin
assembly.
-6
Airplane Models:
737-100, 737-200, 737-200C, 737-300, 737-400, 737-500
GroupVariable Number
1PA001 - PA022
1PA099
1PA231 - PA232
1PC001 - PC005
1PG001 - PG075
1PG199
1PG201 - PG230
1PG251 - PG255
1PG271 - PG279
1PG301 - PG314
1PG331 - PG332
1PG351 - PG356
1PG375
1PG401 - PG403
1PG431 - PG442
1PG471 - PG475
1PG501 - PG505
1PG571 - PG586
1PG621 - PG630
1PG651 - PG652
1PG701 - PG705
1PH001
1PH011 - PH013
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
14 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 15

GroupVariable Number
2PH021 - PH024
1PH701 - PH715
1PH731 - PH732
1PH741 - PH743
1PJ001 - PJ003
2PJ004 - PJ006
3PJ007 - PJ009
1PJ031 - PJ032
1PJ071 - PJ072
1PJ101 - PJ109
2PJ110 - PJ111
3PJ112 - PJ119
1PJ201 - PJ212
2PJ213 - PJ219
5PJ301 - PJ302
6PJ551 - PJ561
6PJ601 - PJ615
6PJ811
6PJ816 - PJ817
1PK026 - PK027
2PK028 - PK029
2PK041 - PK053
2PK061 - PK070
2PK081
3PK082
2PK091 - PK099
2PK101 - PK103
2PK111 - PK120
2PK141 - PK146
2PK201 - PK203
3PK204
2PK211 - PK212
3PK213 - PK220
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
15 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 16

GroupVariable Number
2PK221
3PK222 - PK223
2PK231 - PK235
3PK236 - PK240
2PK241
2PK251 - PK258
2PK271 - PK273
3PK274
2PK281
3PK282 - PK289
2PK291
2PK301 - PK306
3PK307 - PK310
2PK311 - PK315
3PK316 - PK318
2PK341
2PK351 - PK352
3PK353 - PK361
2PK391
3PK431 - PK433
2PK451
3PK452
2PK461 - PK465
3PK466 - PK469
3PK495
2PK501
3PK502 - PK504
2PK511
3PK512 - PK515
3PK519
3PK521 - PK526
4PK527 - PK528
3PK541 - PK565
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
16 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 17

GroupVariable Number
3PK581
3PK591 - PK599
3PK601 - PK617
3PK621 - PK637
3PK641 - PK642
3PK661 - PK666
3PK671 - PK681
3PK691 - PK697
3PK711 - PK716
3PK731 - PK765
3PK771 - PK779
3PK801 - PK804
3PK819 - PK827
3PK830
3PK861 - PK863
3PK871 - PK874
3PK881 - PK884
3PK901 - PK938
3PK971 - PK974
2PL001
3PL002 - PL028
3PL061
3PL081
3PL101 - PL113
3PL151
3PL171 - PL172
3PL201 - PL203
3PL221
3PL401 - PL417
3PL421
3PL441
3PL451 - PL456
3PL471
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
17 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 18

GroupVariable Number
3PL491
3PL501 - PL506
3PL551 - PL562
3PL581
3PL601 - PL603
3PL611
3PL621 - PL623
4PL624 - PL626
3PL631 - PL632
1PL711 - PL712
1PL716 - PL717
2PL718 - PL725
1PL726 - PL728
2PL729 - PL735
1PL736 - PL742
2PL743
3PL744 - PL746
4PL747
1PL756
2PL758
1PL761 - PL763
2PL764 - PL767
3PL768 - PL770
1PL781 - PL782
3PL783 - PL788
1PL793
1PL801 - PL803
3PM001 - PM006
3PM016 - PM017
3PM021 - PM023
3PM051 - PM066
3PM101 - PM119
3PM141 - PM142
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
18 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 19

GroupVariable Number
3PM171
3PM181
3PM251 - PM255
3PM281 - PM283
4PM381
5PM382 - PM399
5PM401 - PM414
6PM415 - PM417
6PM541 - PM550
5PM551 - PM558
6PM559 - PM564
3PN001 - PN002
3PN021 - PN043
3PN081 - PN086
3PN101 - PN113
4PN114 - PN117
3PN131 - PN163
3PN401 - PN406
4PN407 - PN420
4PN431 - PN433
3PN451 - PN452
4PN453 - PN456
4PN471 - PN474
4PN481
4PN491 - PN493
4PN501 - PN502
4PN511 - PN512
4PN521
3PP001 - PP018
4PP019 - PP047
5PP048 - PP054
3PP101 - PP115
4PP116 - PP139
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
19 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 20

GroupVariable Number
5PP140 - PP159
6PP160
3PP161 - PP167
4PP168 - PP169
3PP181 - PP182
4PP183 - PP197
5PP198 - PP199
3PP201 - PP204
4PP205
3PP221
3PP231 - PP238
4PP239 - PP243
3PP281 - PP285
4PP286
3PP301 - PP305
3PP351
4PP352 - PP353
3PP376 - PP381
4PP382 - PP384
4PP391 - PP393
3PP401 - PP410
4PP411 - PP440
3PP471 - PP475
3PP501 - PP502
4PP503 - PP507
5PP508 - PP517
6PP518 - PP520
3PP521
4PP522
3PP631 - PP633
4PP634
3PP651 - PP652
3PP671 - PP696
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
20 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 21

GroupVariable Number
4PP697 - PP699
4PP701 - PP733
3PP771 - PP774
4PP775 - PP779
3PP801 - PP802
4PP803 - PP804
5PP805 - PP808
3PP821 - PP823
4PP824 - PP827
4PP831 - PP848
4PP851 - PP852
4PP861 - PP872
5PP873 - PP874
6PP875 - PP877
4PP891 - PP899
4PP901 - PP916
5PP917 - PP930
4PP931 - PP936
4PP946 - PP948
4PP951 - PP952
4PP961 - PP965
5PP966 - PP967
4PP981 - PP984
5PP985 - PP990
4PP991
5PP993
3PQ001
4PQ002 - PQ014
5PQ015 - PQ016
4PQ026 - PQ041
4PQ051 - PQ068
5PQ069 - PQ085
4PQ086 - PQ091
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
21 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 22

GroupVariable Number
5PQ092
4PQ101 - PQ153
5PQ154 - PQ199
5PQ201 - PQ202
4PQ221 - PQ224
5PQ225 - PQ230
4PQ231 - PQ236
5PQ237
4PQ241 - PQ243
4PQ251 - PQ255
5PQ256 - PQ267
4PQ281
5PQ282 - PQ294
6PQ295 - PQ299
4PQ301
5PQ302 - PQ307
5PQ331 - PQ332
5PQ341 - PQ344
6PQ345 - PQ348
5PQ361 - PQ367
6PQ368 - PQ373
6PQ391 - PQ395
5PQ401 - PQ404
6PQ405 - PQ410
5PQ411 - PQ413
6PQ414 - PQ418
5PQ421
6PQ431 - PQ438
6PQ447 - PQ448
6PQ451
6PQ454
6PQ471 - PQ475
6PQ479 - PQ481
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
22 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 23

GroupVariable Number
5PQ486
6PQ487
5PQ491 - PQ492
6PQ493
6PQ771 - PQ772
6PQ791 - PQ793
6PQ801 - PQ805
6PQ931 - PQ935
6PQ951
6PQ971 - PQ997
6PR001 - PR017
6PR021 - PR034
6PR041 - PR045
6PR061 - PR072
6PR077 - PR082
6PR091 - PR092
6PR096
6PR101
6PR121 - PR122
6PR131 - PR132
6PR141 - PR143
6PR161 - PR172
6PR181
5PS601 - PS616
6PS617 - PS630
5PS631
5PS636 - PS638
5PS641 - PS644
5PS651 - PS657
5PS666 - PS669
5PS691 - PS692
5PS701 - PS703
6PS704 - PS706
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
23 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 24

GroupVariable Number
6PS751 - PS799
6PS811
6PS836 - PS837
6PS841 - PS846
6PS851 - PS852
6PS856
6PS861 - PS863
6PS866 - PS868
6PS871 - PS874
6PS896 - PS897
6PS901 - PS941
6PS956 - PS957
6PS961 - PS963
6PS971 - PS978
5PT001 - PT010
6PT011 - PT015
5PT021 - PT026
6PT027 - PT031
5PT041 - PT059
6PT060 - PT064
5PT101 - PT105
5PT121 - PT125
6PT126 - PT138
5PT146 - PT148
5PT161 - PT168
6PT169 - PT170
5PT181 - PT187
6PT188
5PT211 - PT220
5PT295
5PT301 - PT302
6PT303 - PT309
5PT331 - PT360
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
24 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 25

GroupVariable Number
5PT381 - PT399
5PT401 - PT429
6PT430 - PT438
5PT501 - PT509
6PT510 - PT517
5PT561 - PT565
5PT581 - PT583
6PT584 - PT586
5PT611 - PT621
5PT641
6PT642 - PT644
5PT651 - PT654
6PT655 - PT656
5PT671
6PT672
6PT681 - PT685
5PT701 - PT703
6PT716 - PT717
6PT721 - PT725
6PT801 - PT834
6PT851 - PT854
6PT871 - PT886
6PT901 - PT930
6PT971 - PT973
6PT981 - PT985
6PT996
5PU001 - PU025
6PU301
6PU311 - PU313
4PV001 - PV013
5PV014 - PV055
5PV201 - PV202
6PV203 - PV209
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
25 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 26

GroupVariable Number
6PV226 - PV229
5PV231 - PV237
5PV271 - PV272
6PV281 - PV287
6PV296
6PV301 - PV302
6PV351
6PV356 - PV357
4PW001 - PW013
5PW014 - PW054
4PW061
5PW062 - PW068
5PW072
6PW086 - PW088
4PW091 - PW092
5PW093 - PW094
5PW101
6PW102
6PW106
5PW111 - PW120
5PW156 - PW157
5PW161 - PW166
6PW167 - PW171
5PW201 - PW213
6PW214 - PW230
5PW231 - PW238
6PW239 - PW252
5PW261
6PW262 - PW264
5PW265
6PW266 - PW268
6PW271 - PW276
6PW278
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
26 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 27

GroupVariable Number
5PW281
6PW282 - PW292
5PW293
5PW296
5PW301 - PW319
6PW320 - PW327
6PW401 - PW408
6PW411 - PW418
6PW421 - PW424
6PW431 - PW435
6PW441 - PW450
6PW461 - PW467
4PW501
5PW502 - PW504
5PW511 - PW520
6PW521 - PW522
6PW524 - PW530
5PW531 - PW544
6PW545 - PW550
6PW556 - PW557
5PW561 - PW564
5PW571 - PW576
5PW591 - PW596
5PW611 - PW620
6PW621 - PW622
5PW631 - PW633
6PW634 - PW637
5PW661 - PW662
5PW681 - PW683
5PW701
6PW702
5PW711 - PW716
6PW717
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
27 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 28

GroupVariable Number
5PW741 - PW742
5PW761
6PW771
6PW831
6PW851 - PW856
1PX071
1PX701
1PY001 - PY008
1PY021 - PY022
1PY031
1PY036 - PY037
1PY046 - PY047
2PY048
1PY051 - PY052
2PY053
3PY056 - PY057
2PY101 - PY103
1PY111 - PY113
1PY131
2PY132 - PY133
3PY134 - PY135
2PY141 - PY143
2PY151 - PY152
3PY153 - PY154
2PY156 - PY157
2PY161 - PY162
2PY166
3PY191
2PY201
2PY221 - PY222
3PY231
3PY241 - PY244
3PY270
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
28 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 29

GroupVariable Number
2PY271 - PY274
3PY275
2PY281
2PY286
1PY301 - PY304
1PY321 - PY323
1PY341 - PY346
1PY361 - PY362
1PY381
3PY401
3PY409 - PY411
3PY421 - PY422
3PY441
3PY451
3PY461 - PY463
3PY591 - PY595
3PY611 - PY612
3PY621
3PY631
3PY651
3PY671 - PY672
3PY721
3PY741
2. Spares Affected
Examine your spares supply for the parts or components identified in Paragraph 2.C., Parts
Necessary for Each Airplane. If any parts or components are found, refer to Paragraph 2.C. for
the recommended use.
B. Concurrent Requirements
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
29 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 30

C. Reason
As a result of the Aging Fleet Conference held by the FAA, the 737 Structures Task Group (STG) was
made and included 737 airline operators from a large part of the high time 737 fleet, persons from the
Boeing Company, and monitors from the FAA. The STG examined the structural changes given in
applicable Boeing service bulletins. A selection of these service bulletins was made that contain structural
changes that are important to the continued structural airworthiness of 737 airplanes. The structural
changes given in this service bulletin are recommended to be included on applicable 737 airplanes.
Inspection and modification or repair of the lower corners of the forward cargo door will make sure it
remains structurally satisfactory.
As of 1994, several operators had reported cracks in the forward cargo door. The cracks were occurring
in the radius of the lower frames and in the web of the lower cross-beam. The cracks are caused by
fatigue as a result of cabin pressurization cycles. Cracks in the radius of the corner frames ranged from
3/8 of an inch to 17.5 inches. Cracks in the cross-beam web ranged from 3/8th of an inch to 3 inches.
Airplanes had accumulated 13,500 to 53,100 flight hours and 15,700 to 49,800 flight cycles. Undetected
cracks could cause problems with cabin pressure stability with the possibility of rapid decompression.
Since 1994, there have been three reports from three operators of cracking in the radius of the lower
aft frame on three cargo doors that had the newer 2024 frame and were beyond the effectivity of the
bulletin. The airplanes had accumulated 29,618 to 34,895 flight hours and 22,105 to 30,232 flight cycles.
Because of this, operators that have installed the newer 2024 frames must do an inspection for cracks
until they install the preventive modification. Also, doors on airplanes line number 1232 and on must
do an inspection for cracks until they install the preventive modification.
Also, operators have reported cracking in the outer 'T' chord (lower chord) of the cross-beam. Because
of this, a new cross-beam modification has been developed that can be used to splice in a new outer
'T' chord (lower chord) section.
Since the release of revision 2 of this bulletin, one operator experienced a rapid loss of cabin pressure
during descent as a result of a door crack. Also, a few operators have experienced improper nesting
when installing aft reinforcing angle 65C27804-4 in accordance with Revision 2 and 3 of this bulletin.
Since Revision 3, inputs from operators and further review of the bulletin has lead to some changes.
See the table at the end of this section for a complete list of changes.
The inspection, repair and preventive modification of the number 4 cross beam on the forward cargo
door is the subject of the original issue of Boeing service bulletin 737-52-1149 .
Boeing Service Related Problem (SRP) 737-SRP-52-0057, 737-SRP-52-0070 and 737-SRP-52-0077
are related to this service bulletin.
Boeing Fleet Team Digest 737 FTD 52-01001, 737 FTD 52-02001 and 737 FTD 52-04004 are related
to this service bulletin.
Revision 1 was sent to give the recommendation of the 737 STG, to lower the inspection threshold
from 40,000 flight cycles to 12,000 flight cycles, and to add the inspection of the lower aft frame. The
data given in Notice of Status Change 737-52-1100 NSC1 was included in Revision 1.
Revision 2 was sent to give operators the kit data and installation information to accomplish the
modification or repair of the aft lower corner for the forward cargo door.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
30 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 31

Revision 3 was sent to:
— notify operators that installed a new 2024 frame that they must do an inspection for cracks in the
frame.
— add newer airplanes previously outside the effectivity of this bulletin. These newer airplanes had
the new 2024 frame installed in production.
— increase the inspection requirements of the frames by adding a high frequency eddy current
inspection.
— add a repair for the cross-beam outer chord (lower chord).
— add an improved cross beam modification. The previous cross beam modification is OK.
Revision 4 was sent to:
— Incorporate new frame reinforcing angles that have more material around the edges.
— Remove the instructions to cut a large access hole and replace with instructions to cut a small
access hole (group 1 through 5 airplanes only). Top kits are changed to add small access covers.
— Add the option of installing the small access cover with blind rivets. Since blind rivets are much
easier to remove than blind bolts, it makes it easier for the operator to do repeat inspections. Once
the preventive modification is installed the access cover must be installed with blind bolts.
— Add the option of doing the HFEC inspection through the existing hole in the inner skin if there is
no leveling compound to remove.
— Add the option of lifting the inner skin or removing the frame to gain access to install the cross-beam
doubler and/or doing the HFEC inspection.
— Add a note stating that leveling compound does not have to be replaced until the preventive
modification is installed.
— Remove notes, as necessary, stating you must replace the frame if there is an angle installed in
accordance with service bulletin 737-52-1090.
— Add inspection criteria for operators who have installed aft reinforcing angle 65C27804-4
— Add requirements for leveling compound replacement.
— Clarify that when you do the High Frequency Eddy Current inspection of the frame, you do not
need to inspect the frame where it is overlapped by an adjacent frame. Refer to AMOC letter
120S-01-37, dated January 12, 2001.
— The data given in Information Notice (IN) 737-52A1100 IN 04 is included in this revision. The IN
added weight information to Paragraph 1.H., Weight and Balance Changes, and changed the aft
angle part number.
— The data given in 737-52A1100 IN 05 is included in this revision. The IN stated that operators of
Group 1, 2, and 3 airplane doors should not cut out the large access hole to do the inspections
because the large access plate interferes with the modification in Service Bulletin 737-52-1090.
— The data given in 737-52A1100 IN 06 is included in this revision. The IN clarified the installation
instructions for two fasteners in FIGURE 2 and FIGURE 3. Boeing Structural Item Interim Advisory
SIIA 737-152 is related to this service bulletin.
— The Federal Aviation Administration (FAA) has issued an Airworthiness Directive (AD) which
requires incorporation of this service bulletin.
Revision 5 is sent to make these changes:
— Paragraph 1.F., Approval - More data is added and some data is changed.
— Summary Compliance and Paragraph 1.J.1., Existing Data - Added and changed Airworthiness
Directive and Supplemental Structural Inspection Document references.
— Paragraph 1.E., Compliance - Adjusted the compliance times, removed the data for repeat
inspections, added 2 more rows to table 3, added table 4 and also added an Airworthiness Directive
reference.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
31 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 32

— Summary Action and Paragraph 1.D., Description - Removed all the repeat inspection instructions
and changed visual inspection to a High Frequency Eddy Current (HFEC) inspection of the web
and the outer 'T' chord of the lower cross beam.
— Paragraph 1.J.1., Existing Data - Added Non-Destructive Test (NDT) manual figure references.
— Paragraph 1.K., Publications Affected - A DTI statement is added.
— Paragraph 3.A., Accomplishment Instructions - A note to install shims in all gaps greater than
0.005 inches is added to the General Notes. Also, a note regarding the use of the terms "refer to"
and "in accordance with" is added to the General notes.
— Paragraph 3.B., Work Instructions - Added revision 4 to Part I and removed all the repeat inspection
instructions. Also, added instructions to Part I and Part V to do inspections in accordance with
Service Bulletin 737-52-1149, if cracks are found.
— Paragraph 2.C.2., Parts and Materials Supplied by the Operator - Changed the part number of a
blind bolt and adjusted the quantities of some blind rivets.
— Paragraph 2.D., Parts Necessary to Change Spares - Changed three part numbers.
— Removed 'Detail III' and change 'Detail I', 'Detail II' and two cross section views on the illustrations
of FIGURE 1 to relate to the changed Step table. The Steps are changed to replace detail visual
inspections with HFEC inspections.
— Changed the fasteners with code A in FIGURE 1 from temporary to permanent ones.
— FIGURE 1, FIGURE 2, and FIGURE 4 - The term "in accordance with" is used where another
service bulletin is referenced in the illustrations.
— Added notes in FIGURE 2 and FIGURE 4 which are related to the changes in FIGURE 1.
— Changed the hole diameter for the fastener with code V in FIGURE 2 and FIGURE 3 and add an
alternative fastener for the same code.
— Paragraph 1.G., Manpower - Adjusted six values.
— Paragraph 1.D., Description and Paragraph 1.J.1., Existing Data - Added reference to service
bulletin 737-52-1149.
— Summary Background and Paragraph 1.C., Reason - Added information to give details of the
causes and consequences of the cracks in the door. Also, added reference to Service Bulletin
737-52-1149.
— Paragraph 3.B., Work Instructions - Part V is added to provide instructions for doing Supplemental
Structural Inspections. Also, added instructions to Part I and Part V to do inspections in accordance
with Service Bulletin 737-52-1149, if cracks are found.
— FIGURE 11 through FIGURE 18 are added to provide Supplemental Structural Inspections.
D. Description
On the forward cargo door, do a high frequency eddy current (HFEC) inspection for cracks in the forward
and aft lower end frame at the inner corner radius, the web and the "T" chord of the lower cross-bream.
If no cracks are found, install the frame preventive modification and the number 5 cross-beam
repair/modification. If cracks are found in the frame, replace the frame and install the frame preventive
modification and the number 5 cross-beam repair/modification. If cracks are found in the number 5
cross-beam, install the number 5 cross-beam repair/modification and the frame preventive modification.
Also, do the inspection of the number 4 cross beam in accordance with the original issue of Boeing
service bulletin 737-52-1149 at the time specified in Paragraph 1.E., Compliance .
NOTE: For Group 1 and 2 airplanes that have not done Service Bulletin 737-52-1065: Boeing
recommends that you review SB 737-52-1065 and replace the number 5 stop fittings on the
lower cross-beam by removing the frame in accordance with the applicable steps in FIGURE
2.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
32 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 33

If you replaced a lower frame in accordance with the initial release, revision 1, or revision 2 of this
service bulletin, do an HFEC inspection for cracks in the frame. If you find cracks in the frame, replace
the frame and install the frame preventive modification. Also, do the inspection of the number 4 cross
beam in accordance with the original issue of Boeing service bulletin 737-52-1149 at the time specified
in Paragraph 1.E., Compliance . If you find no cracking in the frame, install the frame preventive
modification. If you installed frame angle 65C27804-4 in accordance with revision 2 or 3 of this bulletin,
then you need to do an inspection for proper fit. If the angle does not fit properly, you must replace it
with new angle 65C38364-41.
NOTE: If you installed a properly fitting frame angle and a number 5 cross-beam doubler on a corner
of the cargo door in accordance with the initial release, revision 1, or revision 2 of this bulletin,
then no action is necessary for the modified corner.
The frame preventive modification requires the installation of a reinforcement angle located over the
outboard radius of the lower end frame, for the full length of the corner.
The frame repair requires the complete replacement of the frame segment, installation of the frame
preventive modification, and the installation of the number 5 cross-beam repair/modification. For Group
1, 2 and 3 airplanes that had a large access plate installed on the forward or aft corner in accordance
with the initial release, revision 1, 2, or 3 of this bulletin: If the large access plate was installed while
replacing an 0.056 frame with another 0.056 frame, or if the larger access plate was installed while
installing the reinforcing angle on a 0.056 frame, then the large access plate will interfere with the frame
preventive modification angle in service bulletin 737-52-1090 Contact Boeing before you do the
preventive modifications in accordance with service bulletin 737-52-1090.
It is recommended that Boeing service bulletin 737-52-1149 and this service bulletin be incorporated
concurrently. Since both service bulletins remove fasteners in the door frame and inner skin, concurrent
incorporation will minimize rework to these parts.
Revision 1 - Airplanes modified in accordance with the previous releases of this service bulletin required
additional work. The lower aft corner of the door should be inspected for cracks.
Revision 2 - No more work is necessary to the forward corner of the cargo door for airplanes that have
had the modification or repair incorporated in accordance with the initial or Revision 1 release of this
service bulletin.
Revision 3 - More work is necessary on airplanes changed in accordance with the previous releases
of this service bulletin. If you replaced the lower forward or lower aft frame in accordance with the initial
release, revision 1, or revision 2 of this service bulletin, then you must do an inspection for cracks in
the frame.
Revision 4 - More work is necessary on airplanes changed in accordance with Revision 2 and Revision
3 of this service bulletin. If an operator installed a 65C27804-4 reinforcement angle on the aft frame,
then some inspections of the angle are required.
Revision 5 - More work is necessary on airplanes that had the lower corner frame replaced as an
alternative to the installation of the modification angle, in accordance with the initial release, revision
1, 2, 3 and 4 of this service bulletin. Do a HFEC inspection of the lower corner frame and number 5
cross-beam in accordance with this service bulletin at the revised time specified in Paragraph 1.E.,
Compliance .
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
33 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 34

More work is necessary for airplanes that have a preventive modification or a lower beam outer "T"
chord repair installed in accordance with this Service Bulletin. Do the supplemental structural inspections
in accordance with Revision 5 of this Service Bulletin.
The airplane effectivity is divided into six groups:
— Group 1, 2, and 3 airplanes are 737-100, -200, -200C and -300 airplanes prior to line number
1231, which is the effectivity of the service bulletin prior to Revision 3. These airplanes were divided
into three groups because of different modification requirements due to service bulletins 737-51-1006
and 737-52-1065. Group 1 airplanes are affected by SB 737-51-1006 which requires that a drain
valve be installed in the lower forward frame. Group 1 and 2 airplanes are affected by SB
737-52-1065 which requires that the stop fittings be replaced on the lower cross-beam. Group 3
airplanes are not affected by 737-51-1006 or 737-52-1065.
— Group 4 airplanes are 737-200, -300, -400, and -500 airplanes from line numbers 1232 to 1678
and 1680. For the purposes of this service bulletin, these airplanes are identical to Group 1, 2,
and 3 airplanes except the corner frames were changed from 7075 to 2024 and made slightly
thicker.
— Group 5 airplanes are 737-300, -400 and -500 airplanes line numbers 1679 and 1681 to 2414.
For the purposes of this service bulletin, these airplanes are identical to Group 4 airplanes except
the lanyard fittings were changed on the inner side of the door.
— Group 6 airplanes are 737-300, -400, and -500 airplanes line number 2415 and on. These airplanes
have a different inner skin assembly.
NOTE: Boeing Document D6-38505 is applicable to this service bulletin.1.
2. The changes specified in the following Boeing Service Bulletins are suggested to be
made before or during the changes specified in this service bulletin:
— 737-52-1090 DOORS - Forward Cargo Door, Forward and Aft Frames -
Inspection Modification and Repair.
— 737-52-1065 DOORS - Forward and Aft Cargo Door Stop Fittings Inspection
and Replacement.
— 737-52-1149 DOORS - Forward Cargo Door - Number 4 Cross Beam Inspection,
Repair and Preventative Modification.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
2-9737-100, 737-200, 737-200C
Group 2-3:
Affected Maintenance Zones
ZoneModel
2-9737-200, 737-200C
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
34 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 35

Group 3:
Affected Maintenance Zones
ZoneModel
209737-300
Group 4:
Affected Maintenance Zones
ZoneModel
2-9737-200
Group 4:
Affected Maintenance Zones
ZoneModel
209737-300, 737-400
Group 5-6:
Affected Maintenance Zones
ZoneModel
209737-300, 737-400, 737-500
E. Compliance
Federal Aviation Administration (FAA) Airworthiness Directive AD 90-06-02, AD 2000-07-06, AD
2008-08-23, AD 2008-09-13 and AD 98-11-04 R1 are related to this service bulletin.
Do the work in accordance with Revision 5 of this service bulletin at the compliance times specified in
the table below.
Table 1: Airplanes not repaired and not modified in accordance with the initial release, revision 1,
2, 3, or 4 of this service bulletin
Compliance TimeActionCondition
Within 4,500 door flight cy-
cles from the date of revision
5 of this service bulletin.
Do a one-time HFEC inspection of the
lower corner frame and the number 5
cross-beam for cracks in accordance
with Work Instructions, "PART I."
Airplanes without either the re-
pair or modification accom-
plished in accordance with previ-
ous releases of this service bul-
letin.
Before further flight.Do the preventive modification in ac-
cordance with Work Instructions,
"PART I."
No crack(s) found in the lower
frame.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
35 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 36

Table 1: Airplanes not repaired and not modified in accordance with the initial release, revision 1,
2, 3, or 4 of this service bulletin
Compliance TimeActionCondition
Before further flight.Replace the frame and do the preven-
tive modification in accordance with
Work Instructions, "PART I."
Crack(s) found in a lower corner
frame after the HFEC inspection.
Do the inspection of the number 4
cross beam on the forward cargo door
in accordance with Part 1 or Part 4,
as applicable, of the Work Instructions,
Boeing service bulletin 737-52-1149,
Original Issue.
Before further flight.Repair or replace the number 5 cross-
beam and do the preventive modifica-
tion in accordance with Work Instruc-
tions, "PART I."
Crack(s) found in the number 5
cross-beam.
Do the inspection of the number 4
cross beam on the forward cargo door
in accordance with Part 1 or Part 4,
as applicable, of the Work Instructions,
Boeing service bulletin 737-52-1149,
Original Issue.
Before further flight.Repair the number 4 cross beam in
accordance with the Work Instructions,
Boeing Service Bulletin 737-52-1149,
Original Issue.
Crack(s) found in the number 4
cross beam.
Table 2: Airplanes modified or repaired in accordance with the initial release, revision 1 or 2 of this
service bulletin and the frame modification angle was not installed
Compliance TimeActionCondition
Within 4,500 door flight cy-
cles from the date of revision
5 of this service bulletin.
Do a one-time HFEC inspection of
the lower corner frame for cracks, in
accordance with Work Instructions,
"PART I".
A lower frame was replaced and
a number 5 cross-beam modifica-
tion doubler is installed, in accor-
dance with the initial release, re-
vision 1 or revision 2 of this ser-
vice bulletin. The frame modifica-
tion angle was not installed.
-No futher action is required at that
lower corner frame.
No crack(s) found in a lower
corner frame.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
36 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 37

Table 2: Airplanes modified or repaired in accordance with the initial release, revision 1 or 2 of this
service bulletin and the frame modification angle was not installed
Compliance TimeActionCondition
Before further flight.Contact Boeing for repair instructions
and do the repair.
Crack(s) found in a lower corner
frame.
Do the inspection of the number 4
cross beam on the forward cargo
door in accordance with Part 1 or
Part 4, as applicable, of the Work In-
structions, Boeing service bulletin
737-52-1149, Original Issue. bulletin.
Before further flight.Repair the number 4 cross beam in
accordance with the Work Instruc-
tions, Boeing Service Bulletin 737-
52-1149, Original Issue.
Crack(s) found in the number 4
cross beam.
Table 3: Airplanes with reinforcement angle 65C27804-4 installed in accordance with Revision 2
or 3 of this Service Bulletin
Compliance TimeActionCondition
Within 4,500 door flight cycles
from the date of revision 5 of
this service bulletin.
Do a one-time general visual
inspection of the reinforcement
angle for excessive shimming
or fastener pull-up in accor-
dance with Work Instructions,
"PART III".
Airplanes with the reinforcement
angle 65C27804-4 installed in
accordance with revision 2 or
revision 3 of this service bulletin.
-No further action is required.The reinforcement angle is in-
stalled without excessive shim-
ming and without fastener pull-
up in accordance with Work In-
structions, "PART III."
Before further flight.Replace the angle in accor-
dance with Work Instructions,
"PART III" and do a one-time
HFEC inspection of the lower
corner frame for cracks in accor-
dance with Work Instructions,
"PART I".
The reinforcement angle in-
stalled with excessive shimming
or fastener pull-up in accor-
dance with Work Instructions,
"PART III."
-No further action is required.No crack(s) found in a lower
corner frame.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
37 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 38

Table 3: Airplanes with reinforcement angle 65C27804-4 installed in accordance with Revision 2
or 3 of this Service Bulletin
Compliance TimeActionCondition
Before further flight.Contact Boeing for repair instruc-
tions and do the repair.
Crack(s) found in a lower corner
frame.
Before further flight.Do the inspection of the number
4 cross beam on the forward
cargo door in accordance with
Part 1 or Part 4, as applicable,
of the Work Instructions, Boeing
service bulletin 737-52-1149,
Original Issue.
Before further flight.Repair the number 4 cross
beam in accordance with the
Work Instructions, Boeing Ser-
vice Bulletin 737-52-1149, Orig-
inal Issue.
Crack(s) found in the number 4
cross beam.
NOTE: This is a new requirement of Revision 5 of this service bulletin. Requirements of AD 2007-07-06
Amendment 39-11660 and AD 90-06-02, Amendment 39-6489 still apply. Also, for work
performed in accordance with Revision 4, an inspection threshold is added per Table 4 of this
service bulletin.
Table 4: Supplemental Structural Inspections for Airplanes with a Preventive Modification or Lower
Beam Outer "T" Chord Repair Installed
Repeat Interval (Not
to Exceed)
Compliance Time (Whichever Occurs
Later)
ActionCondition
4,500 door flight cy-
cles.
Within 4,500 door
flight cycles from the
date of Revision 5 to
this service bulletin.
Before 56,000 total
door flight cycles, or,
Within 18,000 door
flight cycles after the
preventive modifica-
tion is installed,
whichever comes
first.
Do a detailed inspec-
tion and a LFEC in-
spection of the lower
cross beam for
cracks in accordance
with Work Instruc-
tions, Part V - Supple-
mental Structural In-
spections.
Airplanes with a pre-
ventive modification
installed on the for-
ward end of the low-
er cross beam in ac-
cordance with this
service bulletin and
the door flight cycles
are known.
4,500 door flight cy-
cles.
Within 4,500 door
flight cycles from the
date of revision 5 to
this service bulletin.
Within 4,500 door
flight cycles after the
preventive modifica-
tion is installed.
Do a detailed inspec-
tion and a LFEC in-
spection of the lower
cross beam for
cracks in accordance
with Work Instruc-
tions, Part V - Supple-
mental Structural In-
spections.
Airplanes with a pre-
ventive modification
installed on the for-
ward end of the low-
er cross beam in ac-
cordance with this
service bulletin and
the door flight cycles
are not known.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
38 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 39

Table 4: Supplemental Structural Inspections for Airplanes with a Preventive Modification or Lower
Beam Outer "T" Chord Repair Installed
Repeat Interval (Not
to Exceed)
Compliance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.Contact Boeing for
repair instructions
and do the repair.
Crack(s) found
-Before further flight.Do the inspection of
the number 4 cross
beam on the forward
cargo door in accor-
dance with Part 1 or
Part 4, as applicable,
of the Work Instruc-
tions, Boeing service
bulletin 737-52-1149,
Original Issue.
-Before further flight.Repair the number 4
cross beam in accor-
dance with the Work
Instructions, Boeing
Service 737-52-
1149, Original Issue.
Crack(s) found in the
number 4 cross
beam.
4,500 door flight cy-
cles.
Within 4,500 door
flight cycles from the
date of Revision 5 to
this service bulletin.
Before 56,000 total
door flight cycles, or,
Within 18,000 door
flight cycles after the
preventive modifica-
tion is installed,
whichever comes
first.
Do a detailed inspec-
tion and a LFEC in-
spection of the lower
cross beam for
cracks in accordance
with Work Instruc-
tions, Part V - Supple-
mental Structural In-
spections.
Airplanes with a pre-
ventive modification
installed on the aft
end of the lower
cross beam in accor-
dance with this ser-
vice bulletin and the
door flight cycles are
known.
4,500 door flight cy-
cles.
Within 4,500 door
flight cycles from the
date of Revision 5 to
this service bulletin.
Within 4,500 door
flight cycles after the
preventive modifica-
tion is installed.
Do a detailed inspec-
tion and a LFEC in-
spection of the lower
cross beam for
cracks in accordance
with Work Instruc-
tions, Part V - Supple-
mental Structural In-
spections.
Airplanes with a pre-
ventive modification
installed on the aft
end of the lower
cross beam in accor-
dance with this ser-
vice bulletin and the
door flight cycles are
not known.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
39 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 40

Table 4: Supplemental Structural Inspections for Airplanes with a Preventive Modification or Lower
Beam Outer "T" Chord Repair Installed
Repeat Interval (Not
to Exceed)
Compliance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.Contact Boeing for
repair instructions.
Crack(s) found.
-Before further flight.Do the inspection of
the number 4 cross
beam on the forward
cargo door in accor-
dance with Part 1 or
Part 4, as applicable,
of the Work Instruc-
tions, Boeing service
bulletin 737-52-1149,
Original Issue.
-Before further flight.Repair the number 4
cross beam in accor-
dance with the Work
Instructions, Boeing
Service 737-52-
1149, Original Issue.
Crack(s) found in the
number 4 cross
beam.
4,500 door flight cy-
cles.
Within 4,500 door
flight cycles from the
date of Revision 5 to
this service bulletin.
Before 56,000 total
door flight cycles, or,
Within 18,000 door
flight cycles after the
lower beam outer "T"
chord repair is in-
stalled, whichever
comes first.
Do a detailed inspec-
tion and a LFEC in-
spection of the lower
cross beam for
cracks in accordance
with Work Instruc-
tions, Part V - Supple-
mental Structural In-
spections.
Airplanes with a low-
er beam outer "T"
chord repair installed
on the forward end of
the lower cross beam
in accordance with
this service bulletin
and the door flight
cycles are known.
4,500 door flight cy-
cles.
Within 4,500 door
flight cycles from the
date of Revision 5 to
this service bulletin.
Within 4,500 door
flight cycles after the
lower beam outer "T"
chord repair is in-
stalled.
Do a detailed inspec-
tion and a LFEC in-
spection of the lower
cross beam for
cracks in accordance
with Work Instruc-
tions, Part V - Supple-
mental Structural In-
spections.
Airplanes with a low-
er beam outer "T"
chord repair installed
on the forward end of
the lower cross beam
in accordance with
this service bulletin
and the door flight
cycles are not
known.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
40 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 41

Table 4: Supplemental Structural Inspections for Airplanes with a Preventive Modification or Lower
Beam Outer "T" Chord Repair Installed
Repeat Interval (Not
to Exceed)
Compliance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.Contact Boeing for
repair instructions
and do the repair.
Crack(s) found.
-Before further flight.Do the inspection of
the number 4 cross
beam on the forward
cargo door in accor-
dance with Part 1 or
Part 4, as applicable,
of the Work Instruc-
tions, Boeing service
bulletin 737-52-1149,
Original Issue.
-Before further flight.Repair the number 4
cross beam in accor-
dance with the Work
Instructions, Boeing
Service 737-52-
1149, Original Issue.
Crack(s) found in the
number 4 cross
beam.
4,500 door flight cy-
cles.
Within 4,500 door
flight cycles from the
date of Revision 5 to
this service bulletin.
Before 56,000 total
door flight cycles, or,
Within 18,000 door
flight cycles after the
lower beam outer "T"
chord repair is in-
stalled, whichever
comes first.
Do a detailed inspec-
tion and a LFEC in-
spection of the lower
cross beam for
cracks in accordance
with Work Instruc-
tions, Part V - Supple-
mental Structural In-
spections.
Airplanes with a low-
er beam outer "T"
chord repair installed
on the aft end of the
lower cross beam in
accordance with this
service bulletin and
the door flight cycles
are known.
4,500 door flight cy-
cles.
Within 4,500 door
flight cycles from the
date of Revision 5 to
this service bulletin.
Within 4,500 door
flight cycles after the
lower beam outer "T"
chord repair is in-
stalled.
Do a detailed inspec-
tion and a LFEC in-
spection of the lower
cross beam for
cracks in accordance
with Work Instruc-
tions, Part V - Supple-
mental Structural In-
spections.
Airplanes with a low-
er beam outer "T"
chord repair installed
on the aft end of the
lower cross beam in
accordance with this
service bulletin and
the door flight cycles
are not known.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
41 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 42

Table 4: Supplemental Structural Inspections for Airplanes with a Preventive Modification or Lower
Beam Outer "T" Chord Repair Installed
Repeat Interval (Not
to Exceed)
Compliance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.Contact Boeing for
repair instructions
and do the repair.
Crack(s) found.
-Before further flight.Do the inspection of
the number 4 cross
beam on the forward
cargo door in accor-
dance with Part 1 or
Part 4, as applicable,
of the Work Instruc-
tions, Boeing service
bulletin 737-52-1149,
Original Issue.
-Before further flight.Repair the number 4
cross beam in accor-
dance with the Work
Instructions, Boeing
Service Bulletin 737-
52-1149, Original Is-
sue.
Crack(s) found in the
number 4 cross
beam.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
In addition, the Manager of the FAA Seattle Aircraft Certification Office (ACO) approves accomplishment
of the inspection, repair and modification specified in Tables 1, 2, and 3 of this service bulletin as an
alternative method of compliance (AMOC) to the modifications required by paragraphs (c) and (d) of
Airworthiness Directive AD 2000-07-06, at the times specified in AD 2000-07-06. The compliance times
of paragraphs (c) and (d) remain in effect. All provisions of AD 2000-07-06 that are not specifically
referenced in this paragraph remain fully applicable and must be satisfied.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
42 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 43

In addition, the Manager of the FAA Seattle Aircraft Certification Office approves the modification in
accordance with Revision 5 to service bulletin 737-52A1100 , Doors - Forward Cargo - Lower Forward
and Aft Corner Inspection, Modification and Replacement, as an Alternative Method of Compliance
(AMOC) to AD 90-06-02 , Amendment 39-6489. This AMOC applies only to the modifications specified
in Boeing document D6-38505 for Service Bulletin 737-52A1100 . All provisions of AD 90-06-02 that
are not specifically referenced in this paragraph remain fully applicable and must be complied with.
Corner frame replacement in accordance with FIGURE 2 of this service bulletin has been approved
as an AMOC to AD 90-06-02. This AMOC applies only to the modifications specified in Boeing Document
D6-38505 for Service Bulletin 737-52-1090. This AMOC applies only to the terminating modification
for 737-52-1090 of the lowest angles, forward and aft (part numbers 69-76455-1, and -2). All provisions
of AD 90-06-02 that are not specifically referenced in this paragraph remain fully applicable and must
be complied with.
For airplanes identified in this service bulletin, Revision 5, the repairs and/or modifications of this service
bulletin have been reviewed as required by paragraphs (g) and (i) of Airworthiness Directive AD
2008-08-23, paragraphs (e) and (g) of AD 98-11-04 R1, and paragraphs (g) and (i) of AD 2008-09-13.
The repairs and/or modifications are found to affect Structurally Significant Item (SSI) F-1 of
Supplemental Structural Inspection Documents (SSID) D6-37089, Revisions D and E, and D6-82669,
but the F-1 inspections remain effective with the repairs and/or modifications installed. Therefore, an
alternative inspection is not necessary for F-1. Do the existing F-1 inspections as required by paragraphs
(g) and (h) of AD 2008-08-23, paragraphs (b) and (c) of AD 98-11-04 R1, and paragraphs (g) and (h)
of AD 2008-09-13.
The Manager of the FAA Seattle ACO approves the supplemental inspections defined in Paragraph
1.E., Compliance, Table 4 of Revision 5 of this service bulletin as an AMOC to the inspections SSI F-1
required by paragraphs (g) and (h) of AD 2008-08-23 (SSID D6-37089, Revision E), and paragraphs
(g) and (h) of AD 2008-09-13 (SSID D6-82669). The Manager of the FAA, Seattle ACO also approves
the supplemental inspections defined in Paragraph 1.E., Compliance, Table 4 of Revision 5 of this SB
as a method of compliance to paragraph (g) of AD 98-11-04 R1 (SSID D6-37089, Revision E). These
approvals apply only to SSI F-1 of the applicable SSID and only for the portions of the lower cross
beam of the forward door that have been repaired and/or modified in accordance with this service
bulletin. All provisions of AD 2008-08-23, AD 98-11-04 R1 and AD 2008-09-13 that are not specifically
referenced in this paragraph remain fully applicable and must be satisfied.
When this service bulletin specifies contacting Boeing for repair instructions, the repair instructions
must be approved by the FAA in accordance with paragraph (i) of AD 98-11-04 R1, paragraph (l) of
AD 2008-08-23, paragraph (l) of AD 2008-09-13 or paragraph (e) of AD 2000-07-06, as applicable.
G. Manpower
The table below shows an estimate of the task-hours necessary to do this service bulletin for each
cargo door. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate
with operator task-hour data if necessary. The estimate does not include lost time. These are some
examples of lost time:
— Time to adjust to the workplace
— Time to schedule the work
— Time to examine the work
— Time to cure the materials
— Time to make the parts
— Time to find the tools.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
43 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 44

Elapsed Time
(Hours)
Man-HoursNumber of
Persons
Task
10.020.02Door removal, replace and adjust
1.51.51Cut access hole (Group 1 through 5) - each corner
3.03.01Remove leveling compound
2.04.02Inspect - each corner
12.024.01.5Preventive Modification - each corner
11.022.01.5Frame Replacement - each corner
1.51.51Valve Installation (a)
8.0162Stop Fitting Replacement - each corner (b)
(c)(c)TOTAL FOR EACH DOOR
(a) For Group 1 airplanes not replacing the forward frame and that have not done SB 737-51-1006.
(b) for Group 1 and 2 airplanes that have not done SB 737-52-1065. Boeing recommends that you
get access to stop fitting by removing the frame. Man-hour estimate includes frame removal.
(c) Total time will depend on the number of tasks required to modify or repair door.
H. Weight and Balance Changes
Change in Moment (Pound-Inches)Change in Weight
(Pounds)
Applicable to the
installation of kits:
737 Model--
-500-400-300-200-100--
---338.3351.40.865-91880-2 (a)
1158.4908.81117.61245.21291.62.965C38364-46 (b)
1040.2816.41003.6--2.665C38364-47 (c)
(a) Applicable to Group 1 airplanes that have not incorporated service bulletin 737-51-1006.
(b) Applicable to Group 1 through 5 airplanes.
(c) Applicable to Group 6 airplanes.
I. Electrical Load Data
Not applicable.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
44 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 45

J. References
1. Existing Data:
a. Boeing Document D6-38505, "Aging Airplane Service Bulletin Structural Modification and
Inspection Program - Model 737-100 / -200 / -200C".
b. 737-100/200/200C Supplemental Structural Inspection Document (SSID) D6-37089 Rev D,
SSI F-1.
c. Engineering Change Memos PRR 34328-R, PRR 35135-R and PRR 35420-R.
d. Boeing Service Related Problem (SRP) 737-SRP-52-0057, 737-SRP-52-0070,
737-SRP-52-0077.
e. 737 Fleet Team Digest (FTD) 52-01001, 52-02001, 52-04004.
f. 737-100/200 Aircraft Maintenance Manual (AMM) 52-09-121, 52-31-0.
g. 737-300/400/500 Aircraft Maintenance Manual (AMM) 52-09-12, 52-31-00.
h. 737 Non-Destructive Testing (NDT) Manual Part 6, 51-00-00 Figure 1, Figure 4, Figure 11
and Figure 23; Part 6, 52-30-01 .
i. Boeing Structural Item Interim Advisory (SIIA) 737-152.
j. Standard Overhaul Practices Manual (SOPM) 20-30-03, 20-41-02, 20-43-03.
k. Boeing Service Bulletin 737-51-1006, 737-52-1065, 737-52-1090, 737-52-1149.
l. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 90-06-02, Amendment
39-6489, AD 2000-07-06, Amendment 39-11660, AD 2008-08-23, AD 2008-09-13 and AD
98-11-04 R1.
2. Data supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
Forward Cargo Door - Assembly65-46921
Forward Cargo Door - Installation65-49889
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
45 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 46

None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS and new DTI requirements for the structure
affected are contained in Paragraph 1.E., Compliance of this service bulletin.
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability
information.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
46 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 47

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary for Each Airplane, and Paragraph
2.D., Parts Necessary to Change Spares, as shown below. If there is a limit to the quantity (QTY) of
available kits, a supply sequence is given by Spares. More kits become available as shown in the
Reorder Lead Time (ROLT). ROLT is calculated from the date Boeing gets the purchase order.
Unit Price thru
Jun 30/01
ROLT
(Weeks)
QTYDateNameKit Number
Inactive for procurement--Kit - Beam Repair - For-
ward
65-91880-1
$163.0039--Kit - Drain Valve65-91880-2
Inactive for procurement--Kit - Beam Repair - For-
ward
65-91880-3
$404.0027--Stop Fitting - Forward65C16145-7
$274.0028--Stop Fitting - Aft65C16145-8
Inactive for procurement--Kit - Modification - Aft65C27804-1
Inactive for procurement--Kit - Replacement - Aft65C27805-1
Inactive for procurement--Kit - Replacement - Aft65C27805-8
Inactive for procurement--Kit - Beam Repair - Aft65C27805-11
Inactive for procurement--Kit - Modification - For-
ward
65C33342-1
Inactive for procurement--Kit - Modification - For-
ward
65C33342-6
Inactive for procurement--Kit - Replacement - For-
ward
65C33343-1
Inactive for procurement--Kit - Replacement - For-
ward
65C33343-8
Inactive for procurement--Kit - Replacement - For-
ward
65C33343-10
Inactive for procurement--Kit - Replacement - For-
ward
65C33343-11
Inactive for procurement--Top Kit - Frame and
Beam Mod.
65C38364-1
Inactive for procurement--Sub Kit - Aft Beam Modi-
fication
65C38364-11
Inactive for procurement--Top Kit - Forward Frame
Replacement
65C38364-2
Inactive for procurement--Sub Kit - Forward Ac-
cess Cover
65C38364-26
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
47 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 48

Unit Price thru
Jun 30/01
ROLT
(Weeks)
QTYDateNameKit Number
Inactive for procurement--Sub Kit - Aft Access
Cover
65C38364-27
$2,297.0033594AvailableTop Kit - Aft Frame Re-
placement
65C38364-3
Inactive for procurement--Top Kit - Frame and
Beam Mod.
65C38364-30
$824.0015--Sub Kit - Forward Ac-
cess Cover
65C38364-34
$698.0015--Sub Kit - Aft Access
Cover
65C38364-35
$2,441.0026530AvailableTop Kit - Forward Frame
Replacement
65C38364-38
$144.001575AvailableSub Kit - Drain Valve
Supplemental
65C38364-39
Inactive for procurement--Sub Kit - Forward Frame
Reinf.
65C38364-4
$3,173.0026500AvailableSub Kit - Aft Frame Rein-
forcement
65C38364-43
$3,173.0026450AvailableSub Kit - Forward Frame
Reinf.
65C38364-44
$2,126.0015500AvailableSub Kit - Aft Beam Modi-
fication
65C38364-45
$12,395.0026973AvailableTop Kit - Frame and
Beam Mod.
65C38364-46
$11,223.0026287AvailableTop Kit - Frame and
Beam Mod.
65C38364-47
$3,761.0026100AvailableSupplemental Kit65C38364-48
Inactive for procurement--Sub Kit - Aft Frame Rein-
forcement
65C38364-5
$868.0015540AvailableSub Kit - Forward Beam
Modification
65C38364-6
The kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment.
After the Unit Price date, new price and ROLT data is applicable. Prices are in United States dollars.
Terms: Net 30 days.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
48 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 49

Reference this service bulletin and submit your purchase order by one of the methods that
follow:
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
3. Spares Customer Support - MC 36-65 Boeing Spares Department P.O. Box 3707 Seattle,
Washington 98124-2207 USA
B. Industry Support Information
This Service Bulletin was first issued before October of 1994. Therefore, there is no warranty statement
included in this revision.
C. Parts Necessary For Each Airplane
1. Kits/Parts:
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
NOTE: One modification top kit for each door and the operator supplied materials specified in
Paragraph 2.C.2., Parts and Materials Supplied by the Operator, are necessary for each
cargo door. If a frame is cracked, a replacement frame kit will be necessary also.
Active Kits
NotesNameKit Number
Applicable to Group 1 airplanes (a)Kit - Drain Valve65-91880-2
Applicable to all airplane groups
(b)
Top Kit - Aft Frame Replace-
ment
65C38364-3
Applicable to all airplane groups
(b) (c)
Top Kit - Forward Frame Re-
placement
65C38364-38
(c)Sub Kit - Supplemental - Drain
Valve
65C38364-39
Applicable to Groups 1 through 5
(d) (j)
Top Kit - Frame and Beam
Modification
65C38364-46
(e)Sub Kit - Forward Access Cov-
er
65C38364-34
(f)Sub Kit - Aft Access Cover65C38364-35
-Sub Kit - Fasteners65C38364-37
(g)Sub Kit - Aft Frame Reinforce-
ment
65C38364-43
(h)Sub Kit - Forward Frame Rein-
forcement
65C38364-44
(i)Sub Kit - Aft Beam Modification65C38364-45
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
49 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 50

Active Kits
NotesNameKit Number
-Sub Kit - Forward Beam Modifi-
cation
65C38364-6
Applicable to Group 6 airplanes (k)Top Kit - Frame and Beam
Modification
65C38364-47
(a) Drain valve kit 65-91880-2 is applicable only to group 1 airplanes that have not incorpo-
rated SB 737-51-1006.
(b) Top kits 65C38364-38 (fwd) and -3 (aft) contain a new replacement frame that is identical
to the replacement frame found in inactive kits 65C33343-1, -8, -10, and -11 (fwd) and
65C27805-1 and -8 (aft) except it has wider flanges that must be trimmed when the
frame is installed.
(c) Inactive top kit 65C38364-2 plus new supplemental kit 65C38364-39 is equivalent to
the new 65C38364-38 top kit.
(d) For group 1 and 2 airplanes, if service bulletin 737-52-1065 has not been incorporated,
you can install new stop fittings 65C16145-7 (fwd) and -8 (aft) at the time you do this
service bulletin. Boeing recommends that you gain access to the stop fitting by removing
the frame.
(e) Inactive sub kit 65C38364-26 plus new access panel 65C38364-36 is equivalent to new
sub kit 65C38364-34.
(f) Inactive sub kit 65C38364-27 plus new access panel 65C38364-36 is equivalent to new
sub kit 65C38364-35.
(g) Inactive sub kit 65C38364-5 plus new reinforcing angle 65C38364-41 is equivalent to
new sub kit 65C38364-43.
(h) Inactive sub kit 65C38364-4 plus new reinforcing angle 65C38364-42 is equivalent to
new sub kit 65C38364-44.
(i) Inactive sub kit 65C38364-11 plus new beam angle 65C38364-40 is equivalent to new
sub kit 65C38364-45.
(j) Inactive top kit 65C38364-1 plus supplemental kit 65C38364-48 is equivalent to new
top kit 65C38364-46.
(k) Inactive top kit 65C38364-30 plus supplemental kit 65C38364-48 is equivalent to new
top kit 65C38364-47.
Inactive Kits
NotesNameKit Number
Replaced by kit 65-91880-3.Kit - Beam Repair - Forward65-91880-1
Replaced by new sub kit
65C38364-6
Kit - Beam Repair - Forward65-91880-3
Replaced by new sub kit
65C38364-45
Kit - Beam Repair - Aft65C27805-11
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
50 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 51

Inactive Kits
NotesNameKit Number
Replaced by kit 65C38364-44Kit - Modification - Forward65C33342-1
No equivalent replacement kit (a)Kit - Modification - Forward65C33342-6
No equivalent replacement kit (b)Kit - Modification - Aft65C27804-1
No equivalent replacement kit (c)Kit - Replacement - Forward65C33343-1
No equivalent replacement kit (c)Kit - Replacement - Forward65C33343-8
No equivalent replacement kit (c)Kit - Replacement - Forward65C33343-10
No equivalent replacement kit (c)Kit - Replacement - Forward65C33343-11
No equivalent replacement kit (c)Kit - Replacement - Aft65C27805-1
No equivalent replacement kit (c)Kit - Replacement - Aft65C27805-8
(d)Top Kit - Frame and Beam
Modification
65C38364-1
(d)Sub Kit - Aft Beam Modification65C38364-11
(d)Top Kit - Forward Frame Re-
placement
65C38364-2
(d)Sub Kit - Forward Access Cov-
er
65C38364-26
(d)Sub Kit - Aft Access Cover65C38364-27
(d)Sub Kit - Forward Frame Rein-
forcement
65C38364-4
(d)Sub Kit - Aft Frame Reinforce-
ment
65C38364-5
(a) Inactive modification kit 65C33342-6 contains reinforcement angle for the forward frame
which is the same angle used in sub kit 65C38364-4.
(b) Inactive modification kit 65C27804-1 contains reinforcement angle for the aft frame
which is a different angle then the one used in sub kit 65C38364-5.
(c) Top kits 65C38364-38 (fwd) and -3 (aft) contain a new replacement frame that is identical
to the replacement frame found in inactive kits 65C33343-1, -8, -10, and -11 (fwd) and
65C27805-1 and -8 (aft) except it has wider flanges that must be trimmed when the
frame is installed.
(d) Refer to the "Active Kits" table on the preceding page for equivalent kit information.
Kit 65C38364 - TOP KIT - FRAME AND BEAM MODIFICATION, FWD CARGO DOOR
NotesNameQTYNew Part Number
-1-30-46-47-48
(a)Top Kit - Frame and Beam Mod -
Groups 1 thru 5 airplanes
-....65C38364-1
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
51 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 52

Kit 65C38364 - TOP KIT - FRAME AND BEAM MODIFICATION, FWD CARGO DOOR
NotesNameQTYNew Part Number
-1-30-46-47-48
(b)Top Kit - Frame and Beam Mod -
Group 6 airplanes
.-...65C38364-30
Top Kit - Frame and Beam Mod -
Groups 1 thru 5 airplanes
..-..65C38364-46
Top Kit - Frame and Beam Mod -
Group 6 airplanes
...-.65C38364-47
(a) (b)Supplemental Kit....-65C38364-48
Sub Kit11...65C38364-11
Sub Kit1111.65C38364-16
Sub Kit1111.65C38364-25
Sub Kit1....65C38364-26
Sub Kit1....65C38364-27
Sub Kit.2.2.65C38364-31
Sub Kit..1..65C38364-34
Sub Kit..1..65C38364-35
Access Cover....265C38364-36
Sub Kit..1.165C38364-37
Sub Kit11...65C38364-4
Angle -Beam, Aft....165C38364-40
Angle, Aft....165C38364-41
Angle, Fwd....165C38364-42
Sub Kit..11.65C38364-43
Sub Kit..11.65C38364-44
Sub Kit..11.65C38364-45
Sub Kit11...65C38364-5
Sub Kit1111.65C38364-6
(a) -1 top kit inactive and replaced by the new -46 top kit. Inactive -1 top kit plus supplemental kit -
48 is equivalent to the new -46 top kit.
(b) -30 top kit inactive and replaced by the new -47 top kit. Inactive -30 top kit plus supplemental
kit -48 is equivalent to the new -47 top kit.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
52 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 53

Kit 65C38364 - TOP KIT - FRAME AND BEAM MODIFICATION, FWD CARGO DOOR
NotesNameQTYNew Part Number
-2-3-38-39
(a)Top Kit - Fwd Frame Replacement-...65C38364-2
Top Kit - Aft Frame Replacement.-..65C38364-3
Top Kit - Fwd Frame Replacement..-.65C38364-38
Sub Kit - Supplemental, drain valve..1-65C38364-39
Sub Kit.11.65C38364-31
Frame, Aft..1.65C80735-182
Frame, Fwd1.1.65C80735-183
Filler...165-46921-213
Filler (OPTIONAL to 65-46921-213)...165-46921-99
Retainer...165-41867-2
Filler, flat...1BACF3F005H007NN
Rivet...3BACR15BA6D9C
Rivet...3BACR15BB4B10C
Washer, flat...3NAS1149DN432H
(a) -2 top kit inactive and replaced by the new -38 top kit. Inactive -2 top kit plus supplemental
kit -39 is equivalent to the new -38 top kit.
TOP KIT - FRAME AND BEAM MODIFICATION, FWD CARGO DOOR65C38364
-25-16-11-45-6
NamePart NumberQuantity
Sub Kit, Aft 'T' Chord Repair65C38364-25 (a) (b)-....
Sub Kit, Fwd 'T' Chord Repair65C38364-16 (a) (b).-...
Sub Kit, Aft Beam Modification65C38364-11 (c)..-..
65C38364-45 (a)...-.
Sub Kit, Fwd Beam Modification65C38364-6 (a)....-
Filler65C38364-10..111
Doubler-Beam, Aft65C38364-12..11.
Angle-Beam, Aft65C38364-13..1..
Angle65C38364-17.1...
Angle65C38364-18.1...
T-Chord65C38364-19.1...
T-Chord65C38364-221....
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
53 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 54

TOP KIT - FRAME AND BEAM MODIFICATION, FWD CARGO DOOR65C38364
-25-16-11-45-6
NamePart NumberQuantity
Angle65C38364-231....
Angle65C38364-241....
Radius Filler65C38364-2811111
Angle -Beam, Aft65C38364-401
Doubler-Beam, Fwd65C38364-7....1
Angle-Beam, Fwd65C38364-8....1
Filler65C38364-9..111
BoltBACB30FP8A611111
BoltBACB30FP8A722777
BoltBACB30FP8A8..222
Bolt, BlindBACB30VH06CD05..555
Bolt, BlindBACB30VH06CD06..111111
Bolt, BlindBACB30VH06CD07..111
CollarBACC30M833101010
RivetBACR15DS7D822222
RivetBACR15FT6D6C..202020
RivetBACR15FT7D7C33101010
RivetBACR15FT7D8C66999
RivetBACR15GF6D622101010
RivetBACR15GF6D866121212
RivetBACR15GF6D999222
(a) The kit has more parts than are necessary for installation. Discard parts that are not used or keep
the parts for spares.
(b) The 'T' chord repair part are to be used only if the outer 'T' chord is cracked. If the parts are not used,
discard them or keep them for spares.
(c) Inactive sub kit -11 plus a new -40 cross-beam angle equals the new -45 sub kit.
TOP KIT - FRAME AND BEAM MODIFICATION, FWD CARGO DOOR65C38364
-5-4-43-44
NamePart NumberQuantity
Sub Kit, Aft Frame Reinforcement65C38364-5 (a)-...
Sub Kit, Fwd Frame Reinforcement65C38364-4 (a).-..
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
54 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 55

Sub Kit, Aft Frame Reinforcement65C38364-43 (b)..-.
Sub Kit, Fwd Frame Reinforcement65C38364-44 (b)...-
Angle, Aft65C38364-321...
Angle, Fwd65C38364-41..1.
Angle, Aft65C38364-42...1
Angle, Fwd65C33342-4.1..
Filler, taperedBACF3T01B15-082222
Filler, taperedBACF3T01B20-082222
Filler, taperedBACF3T01B20-161111
RivetBACR15DS7D69999
RivetBACR15DS7D722222222
RivetBACR15DS7D85555
RivetBACR15FT5D5C11111111
RivetBACR15FT5D6C4444
RivetBACR15GF5D51111
RivetBACR15GF6D611111111
RivetBACR15GF6D92222
(a) The -4 and -5 sub kits are inactive. They are replaced by the -44 and -43 sub kits respectively.
(b) The kit has more parts than are necessary for installation. Discard parts that are not used or keep
the parts for spares.
TOP KIT - FRAME AND BEAM MODIFICATION, FWD CARGO DOOR65C38364
-26-27-31-34-35-37
NamePart NumberQuantity
Subkit - Fwd access cover65C38364-26 (a) (b)-.....
Subkit - Aft access cover65C38364-27 (a) (b).-....
Subkit - Frame replacement fasteners65C38364-31 (a)..-...
Subkit - Fwd access cover65C38364-34 (a)...-..
Subkit - Aft access cover65C38364-35 (a)....-.
Subkit - Fasteners65C38364-37 (a).....-
Access Cover65C38364-36...11.
Access Cover, Aft5C27805-6.1....
Access Cover, Fwd65C33343-61.....
BoltBACB30FP6A3..3...
BoltBACB30FP6A4..4...
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
55 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 56

TOP KIT - FRAME AND BEAM MODIFICATION, FWD CARGO DOOR65C38364
-26-27-31-34-35-37
NamePart NumberQuantity
BoltBACB30FP6A5.....8
Bolt, BlindBACB30VH06CD02141491414.
Bolt, BlindBACB30VH06CD031818261818.
Bolt, BlindBACB30VH06CD0414151214154
Bolt, BlindBACB30VH06CD05774772
Bolt, BlindBACB30VH06CD0688188.
Bolt, BlindBACB30VH06CD0711177.
CollarBACC30M6..7..8
Filler, TaperedBACF3T01A30-091..1..
Filler, TaperedBACF3T01B22-091.....
Filler, TaperedBACF3T01B24-09.1....
Filler, TaperedBACF3T01B28-0911.11.
FillerACF3T01J08-10.....2
NutplateBACN10JN3CD..2...
NutplateBACN10JP3DCD..1...
NutplateBACN10JR3F..3...
NutplateBACN10KB3F..2...
RivetBACR15BB6D5C.....6
RivetBACR15BB6D6C.....8
RivetBACR15BB7D10C..1...
RivetBACR15BB7D6C351035.
RivetBACR15BB7D7C..5...
RivetBACR15BB7D9C..3...
RivetBACR15DS7D5..13...
RivetBACR15DS7D6..18..1
RivetBACR15DS7D7..26...
RivetBACR15DS7D8..6...
RivetBACR15ET7D6.....13
RivetBACR15ET7D7.....6
RivetBACR15FT5D4C..3...
RivetBACR15FT5D5C..12...
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
56 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 57

TOP KIT - FRAME AND BEAM MODIFICATION, FWD CARGO DOOR65C38364
-26-27-31-34-35-37
NamePart NumberQuantity
RivetBACR15FT5D6C..4...
RivetBACR15FT6D5C..6...
RivetBACR15FT7D5C..14...
RivetBACR15FT7D6C..1...
RivetBACR15FT7D7C..9...
RivetBACR15FT7D8C..1...
RivetBACR15GF3D3..10...
RivetBACR15GF5D5..1...
RivetBACR15GF6D6..3...
WasherNAS1149D0316J.....2
Rivet, BlindNAS1398D6A23..33.
BoltNAS6603-6.....2
(a) The kit has more parts than are necessary for installation. Discard parts that are not used or keep
the parts for spares.
(b) The 65C38364-26 and 65C38364-27 subkits are inactive. They are replaced by new sub kits
65C38364-34 and 65C38364-35.
KIT - DRAIN VALVE65-91880-2
NamePart NumberQuantity
Filler65-46921-99 (a)1
Seal65-46921-1001
Retainer69-41867-21
WasherAN960D43
FillerBACF3F005H007NN1
Rivet - 100 Deg.BACR15BA6D93
RivetBACR15BB4B103
(a) (65-46921-213 is Optional to 65-46921-99).
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
57 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 58

2. Parts and Materials Supplied by the Operator:
NotesNameQTYPart Number / Specifica-
tion
(a)Filler Stock14.0 x 7.0 x 0.05 7075-T6 or
2024-T3/T4 aluminum clad
sheet
(a)Filler Stock11.0 x 7.0 x 0.05 7075-T6 or
2024-T3/T4 aluminum clad
sheet
(b) (h)Blind Rivet11NAS1398D6A2
(b) (h)Blind Rivet8NAS1398D6A3
(b) (h)Blind Rivet7NAS1398D6A4
(b) (h)Blind Rivet12NAS1398D6A5
(b) (h)Blind Rivet2NAS1398D6A6
(c) (d)Large Access Cover14.75 x 13.25 x 0.04 thick
301 1/2 hard steel.
(d)Tapered Filler1BACF3T01A30-09
(d)Tapered Filler (Fwd corner only)1BACF3T01B22-09
(e)"C" channel doubler15.5 x 11.5 x 0.071 thick
2024-0. Heat treat to the -
T3 or -T42 condition after
forming.
(f)SealantAs RequiredBMS 5-95, Class B
(f)Leveling CompoundAs RequiredBMS 5-125, Type II or III
(f)Primer - EpoxyAs RequiredBMS10-11, Type I
(f)EnamelAs RequiredBMS 10-11, Type II
(g) (h)Blind Bolt22 maximumBACB30VH06CD07
(NAS1751-3L7 Optional)
(a) Used as fillers if the lower cross-beam web is cracked and needs to be trimmed out. Part
quantities are for one end of cross-beam only.
(b) For removable access cover in accordance with FIGURE 1. Part quantity is for one corner
only.
(c) Optional to the small access cover. Refer to FIGURE 9.
(d) Used for installing the optional large access cover. Refer to FIGURE 7.
(e) Optional to the cross-beam doubler and angle. Refer to FIGURE 10 and FIGURE 8.
(f) Refer to the Qualified Products List at the end of the Boeing Material Specification (BMS)
for supplier data.
(g) It is possible that some of the blind bolts installed through the inner skin and the number 5
cross-beam need to have longer grip lengths than what is shown in this service bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
58 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 59

NotesNameQTYPart Number / Specifica-
tion
(h) Refer to 737 Structural Repair Manual Chapter 51 for alternative fasteners.
3. Parts Modified and Reidentified:
The parts shown below are changed in accordance with this service bulletin. The quantity (QTY)
is the number of parts changed on each airplane.
NotesNew Part NumberNameQTYExisting Part
Number
--Door - Forward Cargo165-46921-1
--Door - Forward Cargo165-46921-528
--Door - Forward Cargo165-46921-132
--Door - Forward Cargo165-46921-160
--Door - Forward Cargo165-46921-225
--Door - Forward Cargo165-46921-230
NOTE:
– Make the changes in accordance with this service bulletin to all applicable
parts listed above.
– There is no equivalent Boeing part number for the changed part. Identify on
the part that the change in accordance with this service bulletin was made.
– You can use the existing part to replace the new or changed part.
4. Parts Removed and Not Replaced:
None.
D. Parts Necessary to Change Spares
To get the kits shown below, refer to Paragraph 2.A., Material - Price and Availability.
QTYNamePart Number
1Kit - Drain Valve - Forward65-91880-2 (a)
1Top Kit - Frame and Beam Modification65C38364-46 (b) (c)
1Top Kit - Frame and Beam Modification65C38364-47 (c) (d)
(a) Applicable to group 1 airplane doors that have not incorporated SB 737-51-1006.
(b) For group 1 through 5 airplane doors.
(c) This modification top kit does not include a replacement frame. If the frame is cracked,
you must replace the frame using top kit 65C38364-38 (forward) or -3 (aft).
(d) For group 6 airplanes doors.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
59 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

### Page 60

E. Special Tooling - Price and Availability
None
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. Also, maintenance
and overhaul tools in manuals shown in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 25, 1988
737-52A1100Revision 5: February 14, 2011
60 of 178
BOEING SERVICE BULLETIN 737-52A1100
ALERTALERT

The text continues at https://openairdocs.org/service-documents/boeing/737-52a1100/file/46ce807b4f73.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
