# Boeing Special Attention Requirements Bulletin 737-53-1399 RB: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2022-1250; AD 2023-13-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Requirements Bulletin 737-53-1399 RB](https://openairdocs.org/service-documents/boeing/737-53-1399-rb.md)
- Title as filed: RB-737-53-1399 RB Rev 1 BOEING
- Pages: 156
- PDF: https://openairdocs.org/files/sha256/70/86/70860943cd7cbbb0dd4bc020c9e2ee24f00ccd3511c10ca7a090ae8834d3b574
- Page: https://openairdocs.org/service-documents/boeing/737-53-1399-rb/file/70860943cd7c

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Requirements Bulletin
SPECIAL ATTENTION
Number: 737-53-1399 RB
Original Issue: May 20, 2022
Revision 1: March 14, 2023
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Skin Lap Splice at S-4, S-14 and S-24 - Inspection
EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations
(EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for
export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per
Supp.1 to Part 740 of the EAR.
9E991ECCN:
Copyright © 2022 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
1 of 156
3.0

### Page 2

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
2 of 156
REQUIREMENTS BULLETIN 737-53-1399
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
1 . E F F E C T I V I T Y  ................................................ 7
A. Airplanes ................................................ 7
B . S p a r e s  A f f e c t e d  ........................................... 1 5
2. CONCURRENT REQUIREMENTS .................................... 1 5
3 . C O M P L I A N C E  ............................................... 1 5
4. APPROVAL ................................................ 2 5
5. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 7
A. General Information ......................................... 2 7
B. Work Instructions ........................................... 2 8
FIGURE 1: FUSELAGE SKIN - LAP SPLICE AT S-14L AND S-14R BETWEEN STA 360 AND STA 888 -
GENERAL VISUAL INSPECTION [Group 1] ......................... 4 7
FIGURE 2: FUSELAGE SKIN - LAP SPLICE AT S-14L, S-14R, AND S-24R BETWEEN STA 360 AND STA
888 - GENERAL VISUAL INSPECTION [Group 2, Configuration 1] ............. 4 9
FIGURE 3: FUSELAGE SKIN - LAP SPLICE AT S-14L, S-14R, AND S-24R BETWEEN STA 360 AND STA
888 - GENERAL VISUAL INSPECTION [Group 2, Configuration 2] ............. 5 1
FIGURE 4: FUSELAGE SKIN - LAP SPLICE AT S-14R AND S-24R BETWEEN STA 360 AND STA 888 -
GENERAL VISUAL INSPECTION [Group 3] ......................... 5 3
FIGURE 5: FUSELAGE SKIN - LAP SPLICE AT S-14L, S-14R, AND S-24R BETWEEN STA 360 AND STA
888 - GENERAL VISUAL INSPECTION [Group 4, Configuration 1] ............. 5 5
FIGURE 6: FUSELAGE SKIN - LAP SPLICE AT S-14R AND S-24R BETWEEN STA 360 AND STA 888 -
GENERAL VISUAL INSPECTION [Group 4, Configuration 2] ................ 5 7
FIGURE 7: FUSELAGE SKIN - LAP SPLICE AT S-14L AND S-14R BETWEEN STA 360 AND STA 888 -
GENERAL VISUAL INSPECTION [Group 5] ......................... 5 9
FIGURE 8: FUSELAGE SKIN - LAP SPLICE AT S-14L AND S-14R BETWEEN STA 360 AND STA 888 -
GENERAL VISUAL INSPECTION [Group 6] ......................... 6 1
FIGURE 9: UPPER AND LOWER FUSELAGE SKIN - LAP SPLICE AT S-14L AND S-14R BETWEEN STA
360 AND STA 888 - DETAILED INSPECTION [Group 1] .................. 6 3
FIGURE 10: UPPER AND LOWER FUSELAGE SKIN - LAP SPLICE AT S-14L, S-14R, AND S-24R BETWEEN
STA 360 AND STA 888 - DETAILED INSPECTION [Group 2, Configuration 1] ...... 6 6
FIGURE 11: UPPER AND LOWER FUSELAGE SKIN - LAP SPLICE AT S-14L, S-14R, AND S-24R BETWEEN
STA 360 AND STA 888 - DETAILED INSPECTION [Group 2, Configuration 2] ...... 7 0
FIGURE 12: UPPER AND LOWER FUSELAGE SKIN - LAP SPLICE AT S-14R AND S-24R BETWEEN STA
360 AND STA 888 - DETAILED INSPECTION [Group 3] .................. 7 4
FIGURE 13: UPPER AND LOWER FUSELAGE SKIN - LAP SPLICE AT S-14L, S-14R, AND S-24R BETWEEN
STA 360 AND STA 888 - DETAILED INSPECTION [Group 4, Configuration 1] ...... 7 8
FIGURE 14: UPPER AND LOWER FUSELAGE SKIN - LAP SPLICE AT S-14R, AND S-24R BETWEEN STA
360 AND STA 888 - DETAILED INSPECTION [Group 4, Configuration 2] ......... 8 2
FIGURE 15: UPPER AND LOWER FUSELAGE SKIN - LAP SPLICE AT S-14L AND S-14R BETWEEN STA
360 AND STA 888 - DETAILED INSPECTION [Group 5] .................. 8 6
FIGURE 16: UPPER AND LOWER FUSELAGE SKIN - LAP SPLICE AT S-14L AND S-14R BETWEEN STA
360 AND STA 888 - DETAILED INSPECTION [Group 6] .................. 8 9
FIGURE 17: FUSELAGE SKIN - LAP SPLICE AT S-4R - DETAILED INSPECTION, HIGH FREQUENCY
EDDY CURRENT (HFEC) AND ULTRASONIC (UT) INSPECTION [Group 4, Configuration 2]
.................................................. 9 2
FIGURE 18: FUSELAGE SKIN - LAP SPLICE AT S-14L AND S-14R - DETAILED INSPECTION, HIGH
FREQUENCY EDDY CURRENT (HFEC) AND ULTRASONIC (UT) INSPECTION .... 9 5
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
3 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 4

FIGURE 19: FUSELAGE SKIN - LAP SPLICE AT S-24R - DETAILED INSPECTION, HIGH FREQUENCY
EDDY CURRENT (HFEC) AND ULTRASONIC (UT) INSPECTION [Group 2-4] ..... 1 0 1
FIGURE 20: FUSELAGE SKIN - LAP SPLICE AT S-14R BETWEEN STA 727B AND STA 827 - GENERAL
VISUAL INSPECTION [Group 1] ............................... 1 0 4
FIGURE 21: FUSELAGE SKIN - LAP SPLICE AT S-14R BETWEEN STA 727D AND STA 827 - GENERAL
VISUAL INSPECTION [Group 2, Configuration 1] ...................... 1 0 6
FIGURE 22: FUSELAGE SKIN - LAP SPLICE AT S-14R BETWEEN STA 727D AND STA 827 - GENERAL
VISUAL INSPECTION [Group 2, Configuration 2] ...................... 1 0 8
FIGURE 23: FUSELAGE SKIN - LAP SPLICE AT S-14R BETWEEN STA 727D AND STA 827 - GENERAL
VISUAL INSPECTION [Group 3] ............................... 1 1 0
FIGURE 24: FUSELAGE SKIN - LAP SPLICE AT S-14R BETWEEN STA 727I AND STA 827 - GENERAL
VISUAL INSPECTION [Group 4, Configuration 1] ...................... 1 1 2
FIGURE 25: FUSELAGE SKIN - LAP SPLICE AT S-14R BETWEEN STA 727I AND STA 827 - GENERAL
VISUAL INSPECTION [Group 4, Configuration 2] ...................... 1 1 4
FIGURE 26: FUSELAGE SKIN - LAP SPLICE AT S-14R BETWEEN STA 727K AND STA 827 - GENERAL
VISUAL INSPECTION [Group 5] ............................... 1 1 6
FIGURE 27: FUSELAGE SKIN - LAP SPLICE AT S-14R BETWEEN STA 727K AND STA 827 - GENERAL
VISUAL INSPECTION [Group 6] ............................... 1 1 8
FIGURE 28: FUSELAGE SKIN - LAP SPLICE AT S-14R BETWEEN STA 727B AND STA 827 - DETAILED
INSPECTION, HIGH FREQUENCY EDDY CURRENT (HFEC) AND ULTRASONIC (UT)
INSPECTION [Group 1] .................................... 1 2 0
FIGURE 29: FUSELAGE SKIN - LAP SPLICE AT S-14R BETWEEN STA 727D AND STA 827 - DETAILED
INSPECTION, HIGH FREQUENCY EDDY CURRENT (HFEC) AND ULTRASONIC (UT)
INSPECTION [Group 2, Configuration 1] .......................... 1 2 4
FIGURE 30: FUSELAGE SKIN - LAP SPLICE AT S-14R BETWEEN STA 727D AND STA 827 - DETAILED
INSPECTION, HIGH FREQUENCY EDDY CURRENT (HFEC) AND ULTRASONIC (UT)
INSPECTION [Group 2, Configuration 2] .......................... 1 2 8
FIGURE 31: FUSELAGE SKIN - LAP SPLICE AT S-14R BETWEEN STA 727D AND STA 827 - DETAILED
INSPECTION, HIGH FREQUENCY EDDY CURRENT (HFEC) AND ULTRASONIC (UT)
INSPECTION [Group 3] .................................... 1 3 2
FIGURE 32: FUSELAGE SKIN - LAP SPLICE AT S-14R BETWEEN STA 727I AND STA 827 - DETAILED
INSPECTION, HIGH FREQUENCY EDDY CURRENT (HFEC) AND ULTRASONIC (UT)
INSPECTION [Group 4, Configuration 1] .......................... 1 3 6
FIGURE 33: FUSELAGE SKIN - LAP SPLICE AT S-14R BETWEEN STA 727I AND STA 827 - DETAILED
INSPECTION, HIGH FREQUENCY EDDY CURRENT (HFEC) AND ULTRASONIC (UT)
INSPECTION [Group 4, Configuration 2] .......................... 1 4 0
FIGURE 34: FUSELAGE SKIN - LAP SPLICE AT S-14R BETWEEN STA 727K AND STA 827 - DETAILED
INSPECTION, HIGH FREQUENCY EDDY CURRENT (HFEC) AND ULTRASONIC (UT)
INSPECTION [Group 5] .................................... 1 4 4
FIGURE 35: FUSELAGE SKIN - LAP SPLICE AT S-14R BETWEEN STA 727K AND STA 827 - DETAILED
INSPECTION, HIGH FREQUENCY EDDY CURRENT (HFEC) AND ULTRASONIC (UT)
INSPECTION [Group 6] .................................... 1 4 8
FIGURE 36: FUSELAGE SKIN - LAP SPLICE AT S-4R BETWEEN STA 360 AND STA 500H - GENERAL
VISUAL INSPECTION [Group 4, Configuration 2] ...................... 1 5 2
FIGURE 37: UPPER AND LOWER FUSELAGE SKIN - LAP SPLICE AT S-4R BETWEEN STA 360 AND
STA 500H - DETAILED INSPECTION [Group 4, Configuration 2] ............. 1 5 4
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
4 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 5

Commercial 
Airplanes
737
Requirements Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 737-53-1399 RBOriginal Issue: May 20, 2022
Revision 1: March 14, 2023
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Skin Lap Splice at S-4, S-14 and S-24 - Inspection
This revision includes all pages of the requirements bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Effects of this revision on airplanes on which the Original Issue was previously done:
None.
REASON FOR REVISION
This revision is sent to correct discrepancies and combine actions in Compliance tables and Work Instruction
tables for simplification and comprehension. This revision is also to change Figures to clarify inspection task
requirements.
These sections were changed:
- In Compliance: added Federal Aviation Administration (FAA) Notice of Proposed Rule Making (NPRM) statement;
corrected discrepancies and combined actions in Table 1 and Table 3; changed footnotes in Table 1, Table 2
and Table 3.
- In Work Instructions: removed the effectivity for Table 1; corrected discrepancies and combined actions in
Table 1, Table 2 and Table 3; changed footnotes in Table 1, Table 2 and Table 3.
- In Figure 16 through Figure 19: changed figure titles.
- In Figure 17 through Figure 19, and Figure 28 through Figure 35: changed illustrations; changed inspection
steps and footnotes.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Pages with no vertical lines have no changes.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
5 of 156

### Page 6

REVISION HISTORY
Service BulletinService BulletinRequirement BulletinRequirement Bulletin
737-53-1399737-53-1399737-53-1399 RB737-53-1399 RB
Issue DateIssue Date
May 20, 2022Original Issue:May 20, 2022Original Issue:
March 14, 2023Revision 1:March 14, 2023Revision 1:
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
6 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 7

Commercial 
Airplanes
737
Requirements Bulletin
SPECIAL ATTENTION
Number: 737-53-1399 RB
Original Issue: May 20, 2022
Revision 1: March 14, 2023
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Skin Lap Splice at S-4, S-14 and S-24 - Inspection
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY. THIS IS
AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE
THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE
INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION
IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB WHICH THE SB REFERS
TO AS THE RELATED DOCUMENT.
1. Effectivity
A. Airplanes
This bulletin is applicable to 737-600, 737-700, 737-700C, 737-800, 737-900, 737-900ER
Airplane(s), line number(s) 1-2598, 2600-2721, 2723-2813, 2815-2930, 2932-3068, 3070-3323,
3325-3425, 3427-3521, 3523-3611, 3613-3701, 3703-3791, 3793-3878, 3880-3915, 3917-3968,
3970-4013, 4015-4054, 4056-4098, 4100-4140, 4142-4180, 4182-4218, 4220-4255, 4257-4293,
4295-4330, 4332-4365, 4367-4398, 4400-4444, 4446-4480, 4482-4546, 4548-4608, 4610-4672,
4674-4727, 4729-4767, 4769-4812, 4814-4858, 4860-4897, 4899-4937, 4939-4977, 4979-5019,
5021-5057, 5059-5097, 5099-5137, 5139-5177, 5179-5217, 5219-5261, 5263-5297, 5299-5337,
5339-5367, 5369-5397, 5399-5427, 5429-5457, 5459-5477, 5479-5509, 5511-5541, 5543-5566,
5568-5586, 5588-5601, 5603-5622, 5624-5655, 5657-5667, 5669-5679, 5681-5711, 5713-5727,
5729-5739, 5741-5764, 5766-5787, 5789-5795, 5797-5822, 5824-5850, 5853-5879, 5881-5901,
5904-5935, 5937-5947, 5949-5962, 5964-5991, 5994-6019, 6021-6033, 6035-6047, 6049-6073,
6075, 6077-6103, 6105-6113, 6115-6131, 6133-6153, 6155-6159, 6161-6187, 6190-6215,
6217-6221, 6223-6243, 6245-6249, 6251-6271, 6274-6289, 6291-6299, 6301-6307, 6309-6325,
6327, 6329-6343, 6345-6355, 6357-6359, 6361-6371, 6373-6383, 6386-6395, 6397-6407,
6409-6411, 6413-6419, 6421-6429, 6431-6439, 6442-6447, 6449-6455, 6457-6463, 6465-6467,
6469-6471, 6473-6480, 6482-6489, 6491, 6493-6498, 6500-6507, 6509-6514, 6516-6520,
6522-6527, 6529-6531, 6533-6534, 6536-6541, 6543-6547, 6549-6554, 6556-6559, 6561,
6563-6568, 6570-6574, 6576-6581, 6583-6588, 6590-6593, 6596-6597, 6599-6602, 6604-6606,
6608-6611, 6613-6615, 6617-6620, 6622, 6624, 6626-6629, 6631-6633, 6635-6638, 6640-6642,
6644-6647, 6649-6651, 6653-6656, 6659-6660, 6662-6665, 6667-6671, 6673-6676, 6678-6680,
6682-6685, 6688-6689, 6691-6694, 6696-6698, 6700-6703, 6705-6707, 6709-6712, 6714-6716,
6718-6719, 6721, 6723-6725, 6727-6730, 6732-6734, 6736-6739, 6741-6743, 6745-6748,
6751-6752, 6754-6757, 6759-6761, 6763-6766, 6768-6770, 6772-6775, 6777-6779, 6781-6782,
6786-6788, 6790-6791, 6793, 6795, 6797, 6799-6802, 6804, 6806, 6808-6809, 6811, 6813, 6815,
6817-6818, 6820, 6822-6824, 6826-6827, 6829, 6831-6833, 6835-6836, 6838, 6840, 6842,
6844-6845, 6847, 6849, 6851, 6853-6854, 6856-6858, 6860, 6862-6863, 6865, 6867, 6869-6871,
6873-6874, 6878-6880, 6882-6883, 6885, 6887-6889, 6891-6892, 6894, 6896, 6898, 6900-6903,
6905, 6907, 6910, 6912-6914, 6916, 6918-6919, 6921, 6923-6925, 6927-6928, 6930, 6932-6934,
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
7 of 156

### Page 8

6936-6937, 6939, 6943, 6945-6948, 6950, 6952, 6954-6955, 6957-6959, 6961-6962, 6964,
6966-6967, 6969, 6971-6972, 6977, 6979, 6981-6982, 6984, 6986-6987, 6989, 6992, 6994,
6996-6997, 6999, 7001-7002, 7007, 7009, 7011-7012, 7014, 7016-7017, 7019, 7021-7022, 7024,
7026, 7029, 7031-7032, 7034, 7036-7037, 7039, 7041, 7046-7047, 7049, 7051-7052, 7054,
7056-7057, 7059, 7061, 7063, 7066-7067, 7069, 7071-7072, 7076, 7078, 7081-7082, 7084,
7086-7087, 7089, 7091-7092, 7094, 7097, 7099, 7101-7102, 7104, 7106-7107, 7109, 7112,
7116-7117, 7119, 7121-7122, 7124, 7126-7127, 7129, 7131, 7134, 7136-7137, 7139, 7141-7142,
7146, 7149, 7151-7152, 7154, 7156-7157, 7159, 7161-7162, 7164, 7167, 7169, 7171-7172, 7174,
7176-7177, 7179, 7182, 7187, 7189, 7191, 7194, 7197, 7199, 7202, 7204, 7206, 7209, 7212,
7214, 7217, 7221, 7224, 7227, 7229, 7232, 7234-7235, 7239, 7242, 7244, 7247, 7249, 7251,
7257, 7259, 7262, 7264, 7266, 7269, 7272, 7274, 7277, 7279-7280, 7284, 7287, 7292, 7294,
7297, 7299, 7302, 7304, 7307, 7309, 7312, 7314, 7317, 7319, 7322, 7327, 7329, 7332, 7334,
7337, 7339, 7342, 7344, 7347, 7349, 7352, 7354, 7357, 7362, 7364, 7367, 7369, 7372, 7374,
7377, 7379, 7382, 7387, 7397, 7402, 7407, 7412, 7417, 7422, 7432, 7437, 7442, 7447, 7452,
7457, 7467, 7472, 7477, 7482, 7487, 7492, 7502, 7507, 7512, 7517, 7522, 7527, 7537, 7547,
7552, 7557, 7562, 7572, 7577, 7582, 7587, 7592, 7597, 8592, 9103-99999 in 6 Group(s). Where
the effectivity is presented with hyphens between line numbers, the airplane applicability means
"through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group Information for the applicable airplanes is given below.
NOTE: The Variable Number table below includes affected airplanes available as of the issue
date of this bulletin. Affected airplane Variable Numbers added to MyBoeingFleet.com
after the issue date of this bulletin will be shown using the Maintenance Performance
Toolbox EFFECTIVITY search function result.
DESCRIPTIONCONFIGURATIONGROUP
737-600 Airplanes.-1
737-700 Airplanes.-2
737-700 Airplanes.1
737-700 Increased Gross Weight (IGW) Airplanes.2
737-700C Airplanes.-3
737-800 Airplanes.-4
Airplanes that have not been converted to a 737-800 Boeing
Converted Freighter (BCF).
1
Airplanes that have been converted to 737-800 (BCF).2
737-900 Airplanes.-5
737-900ER Airplanes.-6
Airplane Models:
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
8 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 9

737-600, 737-700, 737-700C, 737-800, 737-900, 737-900ER
GroupVariable Number
2YA001 - YA099
2YA101 - YA199
2YA201 - YA211
2YA221
2YA231 - YA242
2YA251 - YA256
2YA271 - YA272
2YA291
2YA301 - YA302
2YA311 - YA314
2YA321 - YA323
2YA336 - YA345
2YA351
2YA356 - YA357
2YA366 - YA367
2YA371 - YA377
2YA501 - YA536
2YA541 - YA552
2YA571 - YA578
2YA601 - YA615
2YA621 - YA622
2YA626 - YA631
2YA635 - YA636
2YA641 - YA642
2YA645 - YA650
2YA656 - YA659
2YA666 - YA667
2YA671 - YA672
2YA681 - YA691
2YA701 - YA710
2YA721 - YA722
GroupVariable Number
2YA731 - YA734
2YA751 - YA756
2YA801 - YA803
2YA809
2YA811 - YA814
2YA831 - YA835
2YA841 - YA862
2YA881 - YA882
2YA891 - YA892
2YA961 - YA978
2YB001 - YB006
2YB101 - YB132
2YB151 - YB153
2YB156 - YB158
2YB161 - YB164
2YB171 - YB172
2YB181 - YB184
2YB201 - YB208
2YB271
2YB276
2YB301 - YB310
2YB371 - YB392
2YB501 - YB502
2YB521 - YB526
2YB541 - YB544
2YB551
2YB561 - YB598
2YB601 - YB636
2YB651
2YB656
2YB671 - YB672
GroupVariable Number
2YB851 - YB863
2YB871 - YB874
2YB881 - YB893
2YB901 - YB903
2YB911
2YB961 - YB975
2YB981
2YB986 - YB998
4YC001 - YC030
4YC051 - YC084
4YC091 - YC095
4YC101 - YC104
4YC111 - YC113
4YC121
4YC126 - YC127
4YC136 - YC141
4YC146 - YC147
4YC151 - YC156
4YC166 - YC171
4YC176 - YC179
4YC186 - YC190
4YC201 - YC203
4YC206 - YC207
4YC301 - YC305
4YC321 - YC387
4YC391 - YC394
4YC396
4YC401 - YC417
4YC421 - YC422
4YC426 - YC428
4YC436 - YC439
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
9 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 10

GroupVariable Number
4YC441 - YC448
4YC451 - YC455
4YC459
4YC461 - YC467
4YC471 - YC499
4YC501 - YC526
4YC571 - YC583
4YC587 - YC589
4YC591 - YC593
4YC601 - YC655
4YC681 - YC696
4YC701 - YC715
4YC720 - YC725
4YC727 - YC752
4YC761 - YC770
4YC781 - YC793
4YC801 - YC892
4YC901 - YC907
4YC921 - YC922
4YC931 - YC932
4YC941 - YC951
4YC971 - YC978
4YC981 - YC983
4YD001 - YD007
4YD021 - YD025
4YD041 - YD057
4YD081 - YD084
4YD101 - YD117
4YD121 - YD126
4YD151 - YD159
4YD171 - YD172
4YD201 - YD203
4YD206 - YD209
GroupVariable Number
4YD216 - YD219
4YD251 - YD254
4YD256 - YD257
4YD261
4YD301 - YD334
4YD391
4YD401 - YD410
4YD412 - YD424
4YD481 - YD485
4YD491 - YD499
5YD501 - YD512
5YD531 - YD535
5YD541 - YD547
5YD561 - YD564
5YD571 - YD572
5YD591 - YD595
5YD601 - YD612
5YD651 - YD655
1YE001 - YE020
1YE051
1YE101 - YE109
1YE151 - YE157
1YE171 - YE172
1YE201 - YE206
1YE301 - YE305
1YE321 - YE326
1YE371 - YE383
4YF001 - YF011
4YF021 - YF049
4YF051 - YF080
4YF086 - YF087
4YF106 - YF107
4YF111 - YF114
GroupVariable Number
4YF116 - YF119
4YF121 - YF132
4YF176 - YF178
4YF191 - YF192
4YF201 - YF276
4YF401 - YF402
4YF431 - YF432
4YF436 - YF437
4YF441 - YF442
4YF451 - YF460
4YF501 - YF599
4YF601 - YF685
4YF691 - YF695
4YF701 - YF707
4YF801 - YF805
4YF831 - YF832
4YF836 - YF838
4YF871 - YF872
4YF901 - YF905
4YF921 - YF928
4YF951 - YF954
2YG001 - YG044
2YG061 - YG064
2YG066 - YG089
2YG091 - YG099
2YG101 - YG104
2YG111 - YG114
2YG116 - YG149
2YG201 - YG205
2YG211 - YG214
2YG221 - YG224
2YG251 - YG252
3YG501 - YG517
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
10 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 11

GroupVariable Number
3YG601 - YG602
3YG701
3YG711
3YG721 - YG722
6YH001 - YH012
6YH031 - YH055
6YH071 - YH080
6YH101 - YH132
6YH201 - YH202
6YH206 - YH207
6YH301 - YH307
6YH321 - YH322
6YH501 - YH542
6YH551 - YH594
6YH601 - YH606
6YH611 - YH620
6YH631 - YH632
6YH636 - YH637
6YH641
6YH681 - YH686
6YH701 - YH755
6YH801 - YH899
6YH901 - YH908
6YH911 - YH915
6YH951 - YH952
4YJ001 - YJ013
4YJ021
4YJ471 - YJ480
4YJ501 - YJ517
4YJ531 - YJ579
4YJ591 - YJ599
4YJ631 - YJ632
4YJ671 - YJ694
GroupVariable Number
4YJ801 - YJ867
4YJ871 - YJ880
4YJ901 - YJ904
4YJ908 - YJ929
4YJ931 - YJ937
4YJ941 - YJ956
4YJ961
4YJ976 - YJ977
4YK001 - YK007
4YK101 - YK104
4YK111 - YK112
4YK121 - YK122
4YK131 - YK133
4YK136 - YK139
4YK141 - YK142
4YK146 - YK148
4YK151 - YK154
4YK161 - YK167
4YK171
4YK176 - YK177
4YK186
4YK191
4YK196
4YK201 - YK202
4YK301 - YK314
4YK321 - YK340
4YK361 - YK378
4YK401 - YK406
4YK426 - YK427
4YK431 - YK450
4YK456 - YK467
4YK471 - YK473
4YK476
GroupVariable Number
4YK478
4YK480 - YK487
4YK491 - YK493
4YK495 - YK499
4YK511 - YK516
4YK521 - YK530
4YK551 - YK571
4YK576 - YK577
4YK580 - YK585
4YK601 - YK602
4YK606 - YK607
4YK611 - YK616
4YK621 - YK634
4YK641 - YK644
4YK651 - YK665
4YK671 - YK672
4YK676 - YK677
4YK681 - YK686
4YK691
4YK695 - YK699
4YK701 - YK713
4YK716 - YK719
4YK721 - YK741
4YK751 - YK770
4YK776 - YK778
4YK781 - YK785
4YK791 - YK792
4YK796 - YK797
4YK801 - YK899
4YK901 - YK912
4YK918 - YK919
4YK921 - YK929
4YK941 - YK999
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
11 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 12

GroupVariable Number
4YL001 - YL005
4YL011 - YL016
4YL021 - YL024
4YL051 - YL052
4YL056 - YL057
4YL061
4YL066 - YL069
4YL076 - YL077
4YL101 - YL137
4YL201 - YL237
4YL241 - YL242
4YL271 - YL272
4YL281 - YL284
4YL301 - YL303
4YL311 - YL314
4YL316 - YL321
4YL351 - YL353
4YL371 - YL374
4YL401
4YL421 - YL429
4YL431 - YL444
4YL461 - YL478
4YL501 - YL509
4YL531 - YL534
4YL541 - YL551
4YL561 - YL579
4YL591 - YL598
4YL601 - YL606
4YL611 - YL612
4YL616 - YL617
4YL621
4YL626
4YL631 - YL634
GroupVariable Number
4YL636 - YL637
4YL661 - YL664
4YL676 - YL691
4YL696 - YL697
4YL701 - YL707
4YL731
4YL751 - YL752
4YL756 - YL757
4YL761 - YL780
4YL796 - YL797
4YL801 - YL815
4YL901 - YL910
4YL921 - YL940
4YL951 - YL968
2YM101 - YM103
2YM201 - YM244
2YM251 - YM299
2YM301 - YM399
2YM401 - YM415
2YM471
2YM481 - YM484
2YM501 - YM515
2YM521 - YM522
2YM541
2YM551 - YM553
2YM571 - YM572
2YM581 - YM582
2YM591 - YM599
2YM631 - YM634
2YM641 - YM652
2YM671 - YM674
2YM691 - YM699
2YM701 - YM710
GroupVariable Number
2YM761 - YM765
2YM771 - YM779
2YN001 - YN016
2YN021 - YN024
2YN061
2YN071 - YN082
2YN091 - YN092
2YN101 - YN112
2YN121
2YN126
2YN201 - YN202
2YN211 - YN219
2YN231 - YN236
2YN261
2YN501
2YN531 - YN534
2YN551 - YN566
2YN581 - YN585
2YN591 - YN593
2YN601 - YN606
2YN651 - YN653
2YN661 - YN663
2YN666 - YN667
2YN671 - YN674
2YN701 - YN702
2YN741 - YN746
2YN756 - YN758
4YQ001 - YQ003
4YQ011 - YQ021
4YQ026 - YQ029
4YQ036 - YQ045
4YQ201 - YQ207
4YQ231
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
12 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 13

GroupVariable Number
4YQ241 - YQ251
4YQ281 - YQ284
4YQ291 - YQ296
4YQ301 - YQ302
4YQ321 - YQ324
4YQ331 - YQ334
4YQ346 - YQ347
4YQ351 - YQ367
4YQ371
4YQ401 - YQ403
4YQ451 - YQ454
4YQ456
4YQ461
4YQ471
4YQ501 - YQ520
4YQ601 - YQ606
4YQ610 - YQ614
4YR001 - YR098
4YR101 - YR105
4YR111 - YR124
4YR126 - YR144
4YR166 - YR182
4YR186 - YR198
4YR201 - YR215
4YR231 - YR294
4YR296 - YR297
4YR301 - YR334
4YR338 - YR341
4YR361 - YR366
4YR371 - YR373
4YR376 - YR377
4YR381 - YR382
4YR386 - YR388
GroupVariable Number
4YR391
4YR396 - YR399
4YR401 - YR405
4YR411 - YR413
4YR416 - YR418
4YR421 - YR424
4YR426 - YR455
4YR457 - YR499
4YR501 - YR506
4YR511 - YR520
4YR526 - YR544
4YR546 - YR551
4YR556 - YR562
4YR571 - YR582
4YR591 - YR592
4YR601 - YR605
4YR616 - YR658
4YR661 - YR663
4YR671 - YR673
4YR676 - YR678
4YR681 - YR682
4YR701 - YR769
4YR771 - YR799
4YR801 - YR827
4YR831 - YR838
4YR841 - YR899
4YR901 - YR903
4YR931 - YR934
4YR938 - YR944
4YR951 - YR998
4YS001 - YS002
4YS006 - YS009
4YS031 - YS032
GroupVariable Number
4YS051 - YS073
4YS101 - YS120
4YS126 - YS142
4YS146 - YS160
4YS166 - YS194
4YS196 - YS197
4YS201 - YS209
4YS221 - YS225
4YS231 - YS236
4YS271 - YS288
4YS295 - YS296
4YS301 - YS348
4YS351 - YS378
4YS381 - YS386
4YS393 - YS395
4YS401
4YS451
4YS456 - YS457
4YS462 - YS465
4YS467
4YS501 - YS502
4YS506
4YS511 - YS518
4YS531
4YS536 - YS538
4YS541 - YS542
4YS546
4YS551 - YS556
4YS561 - YS578
4YS581 - YS595
4YS601 - YS690
4YS701 - YS716
4YS721 - YS762
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
13 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 14

GroupVariable Number
4YS771 - YS780
4YS806 - YS810
4YS816 - YS818
4YS823 - YS825
4YS851 - YS863
4YS876
4YS881 - YS884
4YS891 - YS894
4YS896 - YS897
4YS901 - YS909
4YS911 - YS957
4YS961 - YS974
4YS976 - YS977
4YS981 - YS987
4YS991 - YS998
4YT001 - YT004
4YT006
4YT026 - YT027
4YT031 - YT032
4YT036 - YT038
4YT061 - YT068
4YT101 - YT138
4YT176 - YT185
4YT191
4YT196 - YT199
4YT201
4YT206 - YT207
4YT211 - YT213
4YT251 - YT299
4YT301 - YT307
4YT311 - YT312
4YT321 - YT355
4YT371 - YT372
GroupVariable Number
4YT381
4YT391 - YT396
4YT401 - YT403
4YT411 - YT417
4YT427
4YT461 - YT477
4YT491 - YT492
4YT501 - YT521
4YT551 - YT552
4YT556 - YT563
4YT565
4YT571 - YT578
4YT601 - YT606
4YT701 - YT708
4YT723 - YT726
4YT761 - YT781
4YT791 - YT794
4YT796 - YT797
4YT801 - YT804
4YT811 - YT813
4YT826 - YT827
4YT831 - YT832
4YT841 - YT852
4YT856 - YT863
4YT885 - YT887
4YT891 - YT895
4YT901 - YT998
6YU001 - YU060
6YU201 - YU218
6YU301 - YU329
6YU901 - YU931
4YV001 - YV012
4YV021 - YV023
GroupVariable Number
4YV030 - YV034
4YV037 - YV042
4YV045 - YV047
4YV051 - YV059
4YV081
4YV083 - YV084
4YV097 - YV099
4YV101 - YV154
4YV201 - YV203
4YV251 - YV252
4YV256 - YV257
4YV301 - YV312
4YV351 - YV368
4YV381 - YV388
4YV391 - YV394
4YV401
4YV411 - YV413
4YV431 - YV433
4YV441 - YV454
4YV461 - YV464
4YV467 - YV470
4YV501 - YV512
4YV521
4YV571 - YV586
4YV596
4YV601 - YV605
4YV651 - YV674
4YV676
4YV695 - YV696
4YV701 - YV702
4YV711
4YV722 - YV731
4YV741 - YV794
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
14 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 15

GroupVariable Number
4YV801 - YV820
4YV831 - YV848
4YV881 - YV883
4YV901 - YV915
4YV923 - YV926
4YV971 - YV983
4YW001
4YW011 - YW099
4YW101 - YW164
4YW201 - YW212
4YW226 - YW240
4YW245 - YW261
4YW263
4YW267 - YW281
4YW283 - YW285
4YW292 - YW299
GroupVariable Number
4YW351
4YW356 - YW358
4YW361 - YW366
4YW371 - YW399
4YW401 - YW430
4YW441 - YW445
4YW451 - YW452
4YW471 - YW472
4YW491 - YW498
4YW531 - YW536
4YW541 - YW545
4YW551 - YW580
4YW585 - YW591
4YW595 - YW596
4YW601
4YW610 - YW613
GroupVariable Number
4YW616 - YW623
4YW666
4YW696 - YW699
4YW701 - YW715
4YW726 - YW731
4YW766 - YW775
4YW801 - YW803
4YW811 - YW813
4YW821
4YW831
4YW881
4YW891 - YW893
4YW906 - YW910
4YW916 - YW918
4YW921 - YW925
4YW971 - YW976
B. Spares Affected
None.
2. CONCURRENT REQUIREMENTS
None.
3. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
Requirements Bulletin 737-53-1399 RB. The Airworthiness Directive will make the compliance tasks and
times given in Requirements Bulletin 737-53-1399 RB mandatory.
For airplanes which have incorporated Boeing Business Jet (BBJ) Lower Cabin Altitude Supplemental Type
Certificate (STC) ST01697SE (6500 feet maximum cabin altitude in lieu of 8000 feet) as referenced in
Boeing Service Bulletin 737-21-1149, the flight cycle related compliance times are different from those
specified in this service bulletin. All initial compliance times (thresholds) specified in flight cycles must be
reduced to half of those specified in this service bulletin. All repeat interval compliance times specified in
flight cycles must be reduced to one-quarter of those specified in this service bulletin.
Accomplish the required actions, based on the applicable conditions in Table 1, Table 2 and Table 3 in
accordance with Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
15 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 16

Table 1: Fuselage Skin - Lap Splice - Inspections at S-14L, S-14R and S-24R for any repair, any buckle,
any wrinkle, any bulge and any crack.
Repeat In-
terval (Not
to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 4,500 flight
cycles after the
Original Issue date
of the Require-
ments Bulletin 737-
53-1399 RB.
Before
27,000 total
flight cycles.
Do a General Visual Inspection (GVI) at
each affected skin lap splice location for
any repair.
All airplanes.
-Within 4,500 flight
cycles after the
Original Issue date
of the Require-
ments Bulletin 737-
53-1399 RB.
Before
27,000 total
flight cycles.
CONDITION 1 (ACTION 1): Contact The
Boeing Company for alternative inspec-
tion(s) to Requirements Bulletin 737-53-
1399 RB and do the inspection(s) and
applicable on-condition action(s). (a)
CONDITION 1:
ANY REPAIR
FOUND.
CONDITION 1 (ACTION 2): Do an exter-
nal Detailed inspection at each affected
skin lap splice location for any skin
buckle, any wrinkle and any bulge at the
unrepaired areas.
3,000 flight
cycles.
-Repeat the external Detailed inspection
at each affected skin lap splice location
for any skin buckle, any wrinkle and any
bulge at the unrepaired areas. (b)
CONDITION 1.1:
NO SKIN BUCKLE,
NO WRINKLE AND
NO BULGE FOUND.
-Before further flight.CONDITION 1.2, OPTION 1: Do a De-
tailed inspection, High Frequency Eddy
Current (HFEC) inspection and (single
element) Ultrasonic inspection at each
affected skin lap splice location where
any skin buckle, any wrinkle or any bulge
is found for any crack at the unrepaired
areas.
CONDITION 1.2:
ANY SKIN BUCKLE,
ANY WRINKLE OR
ANY BULGE
FOUND.
-Before further flight.CONDITION 1.2, OPTION 2: Do a De-
tailed inspection, High Frequency Eddy
Current (HFEC) inspection and (phase
array) Ultrasonic inspection at each af-
fected skin lap splice location where any
skin buckle, any wrinkle or any bulge is
found for any crack at the unrepaired
areas.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
16 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 17

Table 1: Fuselage Skin - Lap Splice - Inspections at S-14L, S-14R and S-24R for any repair, any buckle,
any wrinkle, any bulge and any crack.
Repeat In-
terval (Not
to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
600 flight
cycles. (c)
-CONDITION 1.2.1, OPTION 1: Repeat
the Detailed inspection, HFEC inspection
and (single element) Ultrasonic inspec-
tion at each affected skin lap splice loca-
tion where any skin buckle, any wrinkle
or any bulge is found for any crack at
the unrepaired areas. (b)
CONDITION 1.2.1:
NO CRACK FOUND.
600 flight
cycles. (c)
-CONDITION 1.2.1, OPTION 2: Repeat
the Detailed inspection, HFEC inspection
and (phase array) Ultrasonic inspection
at each affected skin lap splice location
where any skin buckle, any wrinkle or
any bulge is found for any crack at the
unrepaired areas. (b)
-Within 600 flight cycles after the
last skin buckle, wrinkle and bulge
inspections for any crack were
done.
CONDITION 1.2.1, OPTION 3: Contact
The Boeing Company for repair instruc-
tions and do the repair for any skin
buckle, any wrinkle or any bulge.
-Before further flight.Contact The Boeing Company for repair
instructions and do the repair.
CONDITION 1.2.2:
ANY CRACK
FOUND.
-Within 4,500 flight
cycles after the
Original Issue date
of the Require-
ments Bulletin 737-
53-1399 RB.
Before
27,000 total
flight cycles.
Do an external Detailed inspection at
each affected skin lap splice location for
any skin buckle, any wrinkle and any
bulge.
CONDITION 2:
NO REPAIR
FOUND.
3,000 flight
cycles.
-Repeat the external Detailed inspection
at each affected skin lap splice location
for any skin buckle, any wrinkle and any
bulge.
CONDITION 2.1:
NO SKIN BUCKLE,
NO WRINKLE AND
NO BULGE FOUND.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
17 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 18

Table 1: Fuselage Skin - Lap Splice - Inspections at S-14L, S-14R and S-24R for any repair, any buckle,
any wrinkle, any bulge and any crack.
Repeat In-
terval (Not
to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 2.2, OPTION 1: Do a De-
tailed inspection, HFEC inspection and
(single element) Ultrasonic inspection at
each affected skin lap splice location
where any skin buckle, any wrinkle or
any bulge is found for any crack.
CONDITION 2.2:
ANY SKIN BUCKLE,
ANY WRINKLE OR
ANY BULGE
FOUND.
-Before further flight.CONDITION 2.2, OPTION 2: Do a De-
tailed inspection, HFEC inspection and
(phase array) Ultrasonic inspection at
each affected skin lap splice location
where any skin buckle, any wrinkle or
any bulge is found for any crack.
600 flight
cycles. (c)
-CONDITION 2.2.1, OPTION 1: Repeat
the Detailed inspection, HFEC inspection
and (single element) Ultrasonic inspec-
tion at each affected skin lap splice loca-
tion where any skin buckle, any wrinkle
or any bulge is found for any crack.
CONDITION 2.2.1:
NO CRACK FOUND.
600 flight
cycles. (c)
-CONDITION 2.2.1, OPTION 2: Repeat
the Detailed inspection, HFEC inspection
and (phase array) Ultrasonic inspection
at each affected skin lap splice location
where any skin buckle, any wrinkle or
any bulge is found for any crack.
-Within 600 flight cycles after the
last skin buckle, wrinkle and bulge
inspections for any crack were
done.
CONDITION 2.2.1, OPTION 3: Contact
The Boeing Company for repair instruc-
tions and do the repair for any skin
buckle, any wrinkle or any bulge.
-Before further flight.Contact The Boeing Company for repair
instructions and do the repair.
CONDITION 2.2.2:
ANY CRACK
FOUND.
(a) This action is not required for any repair found during the General Visual Inspection (GVI) of the affected
skin lap splice areas where a repair covers the affected inspection zones provided that the installed repair
was approved by The Boeing Company Organization Designation Authorization (ODA) via a FAA Form
8100-9 and inspections are accomplished in accordance with the scheduled repair approval listed on the
FAA Form 8100-9.
(b) It is not required to do the repeat inspection(s) at the skin lap splice locations where a repair covers the
affected inspection zones provided that the installed repair was approved by The Boeing Company Orga-
nization Designation Authorization (ODA) via a FAA Form 8100-9 and inspections are accomplished in
accordance with the scheduled repair approval listed on the FAA Form 8100-9.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
18 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 19

Table 1: Fuselage Skin - Lap Splice - Inspections at S-14L, S-14R and S-24R for any repair, any buckle,
any wrinkle, any bulge and any crack.
Repeat In-
terval (Not
to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
(c) It is acceptable to change the repeat action from this OPTION to any other OPTION under this CONDITION.
Operators must comply with the compliance time given for the chosen OPTION under this CONDITION.
Table 2: Fuselage Skin - Lap Splice - Inspection for any crack at specified locations of S-14R above the
aft cargo door.
Repeat In-
terval (Not
to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 4,500 flight
cycles after the
Original Issue date
of the Require-
ments Bulletin 737-
53-1399 RB.
Before
27,000 total
flight cycles.
Do a General Visual Inspection (GVI) at
each affected skin lap splice location for
any repair.
All airplanes.
-Within 4,500 flight
cycles after the
Original Issue date
of the Require-
ments Bulletin 737-
53-1399 RB.
Before
27,000 total
flight cycles.
CONDITION 3, OPTION 1 (ACTION 1):
Contact The Boeing Company for alter-
native inspection(s) to Requirements
Bulletin 737-53-1399 RB and do the in-
spection(s) and applicable on-condition
action(s). (a)
CONDITION 3:
ANY REPAIR
FOUND.
CONDITION 3, OPTION 1 (ACTION 2):
Do a Detailed inspection, High Frequen-
cy Eddy Current (HFEC) inspection and
(single element) Ultrasonic inspection at
each affected skin lap splice location for
any crack at the unrepaired areas.
-Within 4,500 flight
cycles after the
Original Issue date
of the Require-
ments Bulletin 737-
53-1399 RB.
Before
27,000 total
flight cycles.
CONDITION 3, OPTION 2 (ACTION 1):
Contact The Boeing Company for alter-
native inspection(s) to Requirements
Bulletin 737-53-1399 RB and do the in-
spection(s) and applicable on-condition
action(s). (a)
CONDITION 3, OPTION 2 (ACTION 2):
Do a Detailed inspection, High Frequen-
cy Eddy Current (HFEC) inspection and
(phase array) Ultrasonic inspection at
each affected skin lap splice location for
any crack at the unrepaired areas.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
19 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 20

Table 2: Fuselage Skin - Lap Splice - Inspection for any crack at specified locations of S-14R above the
aft cargo door.
Repeat In-
terval (Not
to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
600 flight
cycles. (c)
-CONDITION 3.1, OPTION 1: Repeat the
Detailed inspection, HFEC inspection
and (single element) Ultrasonic inspec-
tion at each affected skin lap splice loca-
tion for any crack at the unrepaired ar-
eas. (b)
CONDITION 3.1:
NO CRACK FOUND
600 flight
cycles. (c)
-CONDITION 3.1, OPTION 2: Repeat the
Detailed inspection, HFEC inspection
and (phase array) Ultrasonic inspection
at each affected skin lap splice location
for any crack at the unrepaired areas.
(b)
-Before further flight.Contact The Boeing Company for repair
instructions and do the repair.
CONDITION 3.2:
ANY CRACK
FOUND.
-Within 4,500 flight
cycles after the
Original Issue date
of the Require-
ments Bulletin 737-
53-1399 RB.
Before
27,000 total
flight cycles.
CONDITION 4, OPTION 1: Do a De-
tailed inspection, HFEC inspection and
(single element) Ultrasonic inspection at
each affected skin lap splice location for
any crack.
CONDITION 4:
NO REPAIR
FOUND.
-Within 4,500 flight
cycles after the
Original Issue date
of the Require-
ments Bulletin 737-
53-1399 RB.
Before
27,000 total
flight cycles.
CONDITION 4, OPTION 2: Do a De-
tailed inspection, HFEC inspection and
(phase array) Ultrasonic inspection at
each affected skin lap splice location for
any crack.
600 flight
cycles. (c)
-CONDITION 4.1, OPTION 1: Repeat the
Detailed inspection, HFEC inspection
and (single element) Ultrasonic inspec-
tion at each affected skin lap splice loca-
tion for any crack.
CONDITION 4.1: NO
CRACK FOUND.
600 flight
cycles. (c)
-CONDITION 4.1, OPTION 2: Repeat the
Detailed inspection, HFEC inspection
and (phase array) Ultrasonic inspection
at each affected skin lap splice location
for any crack.
-Before further flight.Contact The Boeing Company for repair
instructions and do the repair.
CONDITION 4.2:
ANY CRACK
FOUND.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
20 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 21

Table 2: Fuselage Skin - Lap Splice - Inspection for any crack at specified locations of S-14R above the
aft cargo door.
Repeat In-
terval (Not
to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
(a) This action is not required for any repair found during the General Visual Inspection (GVI) of the affected
skin lap splice areas where a repair covers the affected inspection zones provided that the installed repair
was approved by The Boeing Company Organization Designation Authorization (ODA) via a FAA Form
8100-9 and inspections are accomplished in accordance with the scheduled repair approval listed on the
FAA Form 8100-9.
(b) It is not required to do the repeat inspection(s) at the skin lap splice locations where a repair covers the
affected inspection zones provided that the installed repair was approved by The Boeing Company Orga-
nization Designation Authorization (ODA) via a FAA Form 8100-9 and inspections are accomplished in
accordance with the scheduled repair approval listed on the FAA Form 8100-9.
(c) It is acceptable to change the repeat action from this OPTION to any other OPTION under this CONDITION.
Operators must comply with the compliance time given for the chosen OPTION under this CONDITION.
Group 4, Configuration 2:
Table 3: Fuselage Skin - Lap Splice - Inspections at S-4R for any repair, any buckle, any wrinkle, any
bulge and any crack.
Repeat In-
terval (Not
to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 4,500 flight
cycles after the
Original Issue date
of the Require-
ments Bulletin 737-
53-1399 RB or
within 3,000 flight
cycles after conver-
sion to 737-800
Boeing Converted
Freighter (BCF),
whichever occurs
later.
Before
27,000 total
flight cycles.
Do a General Visual Inspection (GVI) of
the skin lap splice at S-4R for any repair.
All Airplanes.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
21 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 22

Group 4, Configuration 2:
Table 3: Fuselage Skin - Lap Splice - Inspections at S-4R for any repair, any buckle, any wrinkle, any
bulge and any crack.
Repeat In-
terval (Not
to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 4,500 flight
cycles after the
Original Issue date
of the Require-
ments Bulletin 737-
53-1399 RB or
within 3,000 flight
cycles after conver-
sion to 737-800
Boeing Converted
Freighter (BCF),
whichever occurs
later.
Before
27,000 total
flight cycles.
CONDITION 5 (ACTION 1): Contact The
Boeing Company for alternative inspec-
tion(s) to Requirements Bulletin 737-53-
1399 RB and do the inspection(s) and
applicable on-condition action(s). (a)
CONDITION 5:
ANY REPAIR
FOUND.
CONDITION 5 (ACTION 2): Do an exter-
nal Detailed inspection of the skin lap
splice at S-4R for any skin buckle, any
wrinkle and any bulge at the unrepaired
areas.
3,000 flight
cycles.
-Repeat the external Detailed inspection
of the skin lap splice at S-4R for any skin
buckle, any wrinkle and any bulge at the
unrepaired areas. (b)
CONDITION 5.1:
NO SKIN BUCKLE,
NO WRINKLE AND
NO BULGE FOUND.
-Before further flight.CONDITION 5.2, OPTION 1: Do a De-
tailed inspection, High Frequency Eddy
Current (HFEC) inspection and (single
element) Ultrasonic inspection of the
skin lap splice at S-4R where any skin
buckle, any wrinkle or any bulge is found
for any crack at the unrepaired areas.
CONDITION 5.2:
ANY SKIN BUCKLE,
ANY WRINKLE OR
ANY BULGE
FOUND.
-Before further flight.CONDITION 5.2, OPTION 2: Do a De-
tailed inspection, High Frequency Eddy
Current (HFEC) inspection and (phase
array) Ultrasonic inspection of the skin
lap splice at S-4R where any skin buck-
le, any wrinkle or any bulge is found for
any crack at the unrepaired areas.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
22 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 23

Group 4, Configuration 2:
Table 3: Fuselage Skin - Lap Splice - Inspections at S-4R for any repair, any buckle, any wrinkle, any
bulge and any crack.
Repeat In-
terval (Not
to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
600 flight
cycles. (c)
-CONDITION 5.2.1, OPTION 1: Repeat
the Detailed inspection, HFEC inspection
and (single element) Ultrasonic inspec-
tion of the skin lap splice at S-4R where
any skin buckle, any wrinkle or any bulge
is found for any crack at the unrepaired
areas. (b)
CONDITION 5.2.1:
NO CRACK FOUND.
600 flight
cycles. (c)
-CONDITION 5.2.1, OPTION 2: Repeat
the Detailed inspection, HFEC inspection
and (phase array) Ultrasonic inspection
of the skin lap splice at S-4R where any
skin buckle, any wrinkle or any bulge is
found for any crack at the unrepaired
areas. (b)
-Within 600 flight cycles after the
last skin buckle, wrinkle and bulge
inspections for any crack were
done.
CONDITION 5.2.1, OPTION 3: Contact
The Boeing Company for repair instruc-
tions and do the repair for any skin
buckle, any wrinkle or any bulge.
-Before further flight.Contact The Boeing Company for repair
instructions and do the repair.
CONDITION 5.2.2:
ANY CRACK
FOUND.
-Within 4,500 flight
cycles after the
Original Issue date
of the Require-
ments Bulletin 737-
53-1399 RB or
within 3,000 flight
cycles after conver-
sion to 737-800
Boeing Converted
Freighter (BCF),
whichever occurs
later.
Before
27,000 total
flight cycles.
Do an external Detailed inspection of the
skin lap splice at S-4R for any skin
buckle, any wrinkle and any bulge.
CONDITION 6:
NO REPAIR
FOUND.
3,000 flight
cycles.
-Repeat the external Detailed inspection
of the skin lap splice at S-4R for any skin
buckle, any wrinkle and any bulge.
CONDITION 6.1:
NO SKIN BUCKLE,
NO WRINKLE AND
NO BULGE FOUND.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
23 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 24

Group 4, Configuration 2:
Table 3: Fuselage Skin - Lap Splice - Inspections at S-4R for any repair, any buckle, any wrinkle, any
bulge and any crack.
Repeat In-
terval (Not
to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 6.2, OPTION 1: Do a De-
tailed inspection, HFEC inspection and
(single element) Ultrasonic inspection of
the skin lap splice at S-4R where any
skin buckle, any wrinkle or any bulge is
found for any crack.
CONDITION 6.2:
ANY SKIN BUCKLE,
ANY WRINKLE OR
ANY BULGE
FOUND.
-Before further flight.CONDITION 6.2, OPTION 2: Do a De-
tailed inspection, HFEC inspection and
(phase array) Ultrasonic inspection of
the skin lap splice at S-4R where any
skin buckle, any wrinkle or any bulge is
found for any crack.
600 flight
cycles. (c)
-CONDITION 6.2.1, OPTION 1: Repeat
the Detailed inspection, HFEC inspection
and (single element) Ultrasonic inspec-
tion of the skin lap splice at S-4R where
any skin buckle, any wrinkle or any bulge
is found for any crack.
CONDITION 6.2.1:
NO CRACK FOUND.
600 flight
cycles. (c)
-CONDITION 6.2.1, OPTION 2: Repeat
the Detailed inspection, HFEC inspection
and (phase array) Ultrasonic inspection
of the skin lap splice at S-4R where any
skin buckle, any wrinkle or any bulge is
found for any crack.
-Within 600 flight cycles after the
last skin buckle, wrinkle and bulge
inspections for any crack were
done.
CONDITION 6.2.1, OPTION 3: Contact
The Boeing Company for repair instruc-
tions and do the repair for any skin
buckle, any wrinkle or any bulge.
-Before further flight.Contact The Boeing Company for repair
instructions and do the repair.
CONDITION 6.2.2:
ANY CRACK
FOUND.
(a) This action is not required for any repair found during the General Visual Inspection (GVI) of the affected
skin lap splice areas where a repair covers the affected inspection zones provided that the installed repair
was approved by The Boeing Company Organization Designation Authorization (ODA) via a FAA Form
8100-9 and inspections are accomplished in accordance with the scheduled repair approval listed on the
FAA Form 8100-9.
(b) It is not required to do the repeat inspection(s) at the skin lap splice locations where a repair covers the
affected inspection zones provided that the installed repair was approved by The Boeing Company Orga-
nization Designation Authorization (ODA) via a FAA Form 8100-9 and inspections are accomplished in
accordance with the scheduled repair approval listed on the FAA Form 8100-9.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
24 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 25

Group 4, Configuration 2:
Table 3: Fuselage Skin - Lap Splice - Inspections at S-4R for any repair, any buckle, any wrinkle, any
bulge and any crack.
Repeat In-
terval (Not
to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
(c) It is acceptable to change the repeat action from this OPTION to any other OPTION under this CONDITION.
Operators must comply with the compliance time given for the chosen OPTION under this CONDITION.
4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
This Requirements Bulletin is also approved for airplanes having FAA Aviation Partners Boeing (APB)
Supplemental Type Certificate (STC) number ST00830SE installed (not including any areas affected by
the split scimitar winglet configuration).
For 737-700C and BBJ models that have APB winglets installed by STC number ST00830SE, the operator
is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements
Bulletin if the bulletin is in the area affected by blended winglets.
This Requirements Bulletin is also approved for airplanes converted into 737-800BCF under project number
TS14-0042 that have incorporated Boeing drawing 800A0003 specified in Type Certificate Data Sheet
(TCDS).
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
25 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 26

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
26 of 156
REQUIREMENTS BULLETIN 737-53-1399
BLANK PAGE

### Page 27

5.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. For the related SB, some locations are marked RC Start and RC
End to identify the requirements that are restated from the RB. For the related SB,
the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD.
Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations
to steps between RC Start and RC End, including substeps and identified figures.
For the related SB, the steps not between RC Start and RC End may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC; this is provided that the
steps between RC Start and RC End, including sub-steps and identified figures, can
still be done as specified, and the airplane can be put back in an airworthy condition.
Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. Boeing Service Letter 737-SL-51-042, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 737 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 737
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
27 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 28

6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
7. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
8. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
9. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation or assembly to detect damage, failure or irregularity. This could include
tactile assessment in which a component or assembly can be checked for
tightness/security. Available lighting is normally supplemented with a direct source
of good lighting at an intensity deemed appropriate. Inspection aids such as mirrors
and magnifying lenses may be necessary. Surface cleaning and elaborate access
procedures may be required.
10. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance, unless otherwise
specified. A mirror may be necessary to enhance visual access to all exposed surfaces
in the inspection area. This level of inspection is made under normally available
lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may
require removal or opening of access panels or doors. Stands, ladders or platforms
may be required to gain proximity to the area being checked. Basic cleaning may be
required to ensure appropriate visibility.
11. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION,
do all of the ACTION numbers for that CONDITION or OPTION.
B. WORK INSTRUCTIONS
Actions Required for Compliance
1. Requirements
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
28 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 29

Table 1: Fuselage Skin - Lap Splice - Inspections at S-14L, S-14R and S-24R for any repair, any buckle,
any wrinkle, any bulge and any crack.
Refer to the
listed proce-
dures in SB
737-53-1399
Original Issue
or later ap-
proved revi-
sions as an
accepted pro-
cedure.
Method of ComplianceActionCondition
PART 1:
OPEN AC-
CESS
-Do a General Visual Inspection (GVI) at
each affected skin lap splice location for
any repair.
All airplanes.
-Group 1: FIGURE 1
-Group 2 Configuration 1: FIG-
URE 2
-Group 2 Configuration 2: FIG-
URE 3
-Group 3: FIGURE 4
-Group 4 Configuration 1: FIG-
URE 5
-Group 4 Configuration 2: FIG-
URE 6
-Group 5: FIGURE 7
-Group 6: FIGURE 8
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
29 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 30

Table 1: Fuselage Skin - Lap Splice - Inspections at S-14L, S-14R and S-24R for any repair, any buckle,
any wrinkle, any bulge and any crack.
Refer to the
listed proce-
dures in SB
737-53-1399
Original Issue
or later ap-
proved revi-
sions as an
accepted pro-
cedure.
Method of ComplianceActionCondition
--CONDITION 1 (ACTION 1): Contact The
Boeing Company for alternative inspec-
tion(s) to Requirements Bulletin 737-53-
1399 RB and do the inspection(s) and
applicable on-condition action(s). (a)
CONDITION 1:
ANY REPAIR
FOUND.
-Group 1: FIGURE 9CONDITION 1 (ACTION 2): Do an exter-
nal Detailed inspection at each affected
skin lap splice location for any skin
buckle, any wrinkle and any bulge at the
unrepaired areas.
-Group 2 Configuration 1: FIG-
URE 10
-Group 2 Configuration 2: FIG-
URE 11
-Group 3: FIGURE 12
-Group 4 Configuration 1: FIG-
URE 13
-Group 4 Configuration 2: FIG-
URE 14
-Group 5: FIGURE 15
-Group 6: FIGURE 16
-Group 1: FIGURE 9Repeat the external Detailed inspection
at each affected skin lap splice location
for any skin buckle, any wrinkle and any
bulge at the unrepaired areas. (b)
CONDITION 1.1:
NO SKIN BUCKLE,
NO WRINKLE AND
NO BULGE FOUND.
-Group 2 Configuration 1: FIG-
URE 10
-Group 2 Configuration 2: FIG-
URE 11
-Group 3: FIGURE 12
-Group 4 Configuration 1: FIG-
URE 13
-Group 4 Configuration 2: FIG-
URE 14
-Group 5: FIGURE 15
-Group 6: FIGURE 16
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
30 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 31

Table 1: Fuselage Skin - Lap Splice - Inspections at S-14L, S-14R and S-24R for any repair, any buckle,
any wrinkle, any bulge and any crack.
Refer to the
listed proce-
dures in SB
737-53-1399
Original Issue
or later ap-
proved revi-
sions as an
accepted pro-
cedure.
Method of ComplianceActionCondition
-Group 1: FIGURE 18CONDITION 1.2, OPTION 1: Do a De-
tailed inspection, High Frequency Eddy
Current (HFEC) inspection and (single
element) Ultrasonic inspection at each
affected skin lap splice location where
any skin buckle, any wrinkle or any bulge
is found for any crack at the unrepaired
areas.
CONDITION 1.2:
ANY SKIN BUCKLE,
ANY WRINKLE OR
ANY BULGE
FOUND.
-Group 2 Configuration 1 :
FIGURE 18 and FIGURE 19
-Group 2 Configuration 2: FIG-
URE 18 and FIGURE 19
-Group 3: FIGURE 18 and
FIGURE 19
-Group 4 Configuration 1: FIG-
URE 18 and FIGURE 19
-Group 4 Configuration 2: FIG-
URE 18 and FIGURE 19
-Group 5: FIGURE 18
-Group 6: FIGURE 18
-GROUP 1: FIGURE 18CONDITION 1.2, OPTION 2: Do a De-
tailed inspection, High Frequency Eddy
Current (HFEC) inspection and (phase
array) Ultrasonic inspection at each af-
fected skin lap splice location where any
skin buckle, any wrinkle or any bulge is
found for any crack at the unrepaired
areas.
-Group 2 Configuration 1 :
FIGURE 18 and FIGURE 19
-Group 2 Configuration 2: FIG-
URE 18 and FIGURE 19
-Group 3: FIGURE 18 and
FIGURE 19
-Group 4 Configuration 1: FIG-
URE 18 and FIGURE 19
-Group 4 Configuration 2: FIG-
URE 18 and FIGURE 19
-Group 5: FIGURE 18
-Group 6: FIGURE 18
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
31 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 32

Table 1: Fuselage Skin - Lap Splice - Inspections at S-14L, S-14R and S-24R for any repair, any buckle,
any wrinkle, any bulge and any crack.
Refer to the
listed proce-
dures in SB
737-53-1399
Original Issue
or later ap-
proved revi-
sions as an
accepted pro-
cedure.
Method of ComplianceActionCondition
(c)Group 1: FIGURE 18CONDITION 1.2.1, OPTION 1: Repeat
the Detailed inspection, HFEC inspection
and (single element) Ultrasonic inspec-
tion at each affected skin lap splice loca-
tion where any skin buckle, any wrinkle
or any bulge is found for any crack at
the unrepaired areas. (b)
CONDITION 1.2.1:
NO CRACK FOUND. Group 2 Configuration 1 :
FIGURE 18 and FIGURE 19
Group 2 Configuration 2: FIG-
URE 18 and FIGURE 19
Group 3: FIGURE 18 and
FIGURE 19
Group 4 Configuration 1: FIG-
URE 18 and FIGURE 19
Group 4 Configuration 2: FIG-
URE 18 and FIGURE 19
Group 5: FIGURE 18
Group 6: FIGURE 18
(c)Group 1: FIGURE 18CONDITION 1.2.1, OPTION 2: Repeat
the Detailed inspection, HFEC inspection
and (phase array) Ultrasonic inspection
at each affected skin lap splice location
where any skin buckle, any wrinkle or
any bulge is found for any crack at the
unrepaired areas. (b)
Group 2 Configuration 1 :
FIGURE 18 and FIGURE 19
Group 2 Configuration 2: FIG-
URE 18 and FIGURE 19
Group 3: FIGURE 18 and
FIGURE 19
Group 4 Configuration 1: FIG-
URE 18 and FIGURE 19
Group 4 Configuration 2: FIG-
URE 18 and FIGURE 19
Group 5: FIGURE 18
Group 6: FIGURE 18
--CONDITION 1.2.1, OPTION 3: Contact
The Boeing Company for repair instruc-
tions and do the repair for any skin
buckle, any wrinkle or any bulge.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
32 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 33

Table 1: Fuselage Skin - Lap Splice - Inspections at S-14L, S-14R and S-24R for any repair, any buckle,
any wrinkle, any bulge and any crack.
Refer to the
listed proce-
dures in SB
737-53-1399
Original Issue
or later ap-
proved revi-
sions as an
accepted pro-
cedure.
Method of ComplianceActionCondition
--Contact The Boeing Company for repair
instructions and do the repair.
CONDITION 1.2.2:
ANY CRACK
FOUND. PART 2:CLOSE AC-
CESS.
-
-Group 1: FIGURE 9Do an external Detailed inspection at
each affected skin lap splice location for
any skin buckle, any wrinkle and any
bulge.
CONDITION 2:
NO REPAIR
FOUND. -Group 2 Configuration 1: FIG-URE 10
-Group 2 Configuration 2: FIG-
URE 11
-Group 3: FIGURE 12
-Group 4 Configuration 1: FIG-
URE 13
-Group 4 Configuration 2: FIG-
URE 14
-Group 5: FIGURE 15
-Group 6: FIGURE 16
-Group 1: FIGURE 9Repeat the external Detailed inspection
at each affected skin lap splice location
for any skin buckle, any wrinkle and any
bulge.
CONDITION 2.1:
NO SKIN BUCKLE,
NO WRINKLE AND
NO BULGE FOUND.
-Group 2 Configuration 1: FIG-
URE 10
-Group 2 Configuration 2: FIG-
URE 11
-Group 3: FIGURE 12
-Group 4 Configuration 1: FIG-
URE 13
-Group 4 Configuration 2: FIG-
URE 14
-Group 5: FIGURE 15
-Group 6: FIGURE 16
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
33 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 34

Table 1: Fuselage Skin - Lap Splice - Inspections at S-14L, S-14R and S-24R for any repair, any buckle,
any wrinkle, any bulge and any crack.
Refer to the
listed proce-
dures in SB
737-53-1399
Original Issue
or later ap-
proved revi-
sions as an
accepted pro-
cedure.
Method of ComplianceActionCondition
-Group 1: FIGURE 18CONDITION 2.2, OPTION 1: Do a De-
tailed inspection, HFEC inspection and
(single element) Ultrasonic inspection at
each affected skin lap splice location
where any skin buckle, any wrinkle or
any bulge is found for any crack.
CONDITION 2.2:
ANY SKIN BUCKLE,
ANY WRINKLE OR
ANY BULGE
FOUND.
-Group 2 Configuration 1 :
FIGURE 18 and FIGURE 19
-Group 2 Configuration 2: FIG-
URE 18 and FIGURE 19
-Group 3: FIGURE 18 and
FIGURE 19
-Group 4 Configuration 1: FIG-
URE 18 and FIGURE 19
-Group 4 Configuration 2: FIG-
URE 18 and FIGURE 19
-Group 5: FIGURE 18
-Group 6: FIGURE 18
-Group 1: FIGURE 18CONDITION 2.2, OPTION 2: Do a De-
tailed inspection, HFEC inspection and
(phase array) Ultrasonic inspection at
each affected skin lap splice location
where any skin buckle, any wrinkle or
any bulge is found for any crack.
-Group 2 Configuration 1: FIG-
URE 18 and FIGURE 19
-Group 2 Configuration 2: FIG-
URE 18 and FIGURE 19
-Group 3: FIGURE 18 and
FIGURE 19
-Group 4 Configuration 1: FIG-
URE 18 and FIGURE 19
-Group 4 Configuration 2: FIG-
URE 18 and FIGURE 19
-Group 5: FIGURE 18
-Group 6: FIGURE 18
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
34 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 35

Table 1: Fuselage Skin - Lap Splice - Inspections at S-14L, S-14R and S-24R for any repair, any buckle,
any wrinkle, any bulge and any crack.
Refer to the
listed proce-
dures in SB
737-53-1399
Original Issue
or later ap-
proved revi-
sions as an
accepted pro-
cedure.
Method of ComplianceActionCondition
(c)Group 1: FIGURE 18CONDITION 2.2.1, OPTION 1: Repeat
the Detailed inspection, HFEC inspection
and (single element) Ultrasonic inspec-
tion at each affected skin lap splice loca-
tion where any skin buckle, any wrinkle
or any bulge is found for any crack.
CONDITION 2.2.1:
NO CRACK FOUND. Group 2 Configuration 1: FIG-
URE 18 and FIGURE 19
Group 2 Configuration 2: FIG-
URE 18 and FIGURE 19
Group 3: FIGURE 18 and
FIGURE 19
Group 4 Configuration 1: FIG-
URE 18 and FIGURE 19
Group 4 Configuration 2: FIG-
URE 18 and FIGURE 19
Group 5: FIGURE 18
Group 6: FIGURE 18
(c)Group 1: FIGURE 18CONDITION 2.2.1, OPTION 2: Repeat
the Detailed inspection, HFEC inspection
and (phase array) Ultrasonic inspection
at each affected skin lap splice location
where any skin buckle, any wrinkle or
any bulge is found for any crack.
Group 2 Configuration 1 :
FIGURE 18 and FIGURE 19
Group 2 Configuration 2: FIG-
URE 18 and FIGURE 19
Group 3: FIGURE 18 and
FIGURE 19
Group 4 Configuration 1: FIG-
URE 18 and FIGURE 19
Group 4 Configuration 2: FIG-
URE 18 and FIGURE 19
Group 5: FIGURE 18
Group 6: FIGURE 18
--CONDITION 2.2.1, OPTION 3: Contact
The Boeing Company for repair instruc-
tions and do the repair for any skin
buckle, any wrinkle or any bulge.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
35 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 36

Table 1: Fuselage Skin - Lap Splice - Inspections at S-14L, S-14R and S-24R for any repair, any buckle,
any wrinkle, any bulge and any crack.
Refer to the
listed proce-
dures in SB
737-53-1399
Original Issue
or later ap-
proved revi-
sions as an
accepted pro-
cedure.
Method of ComplianceActionCondition
--Contact The Boeing Company for repair
instructions and do the repair.
CONDITION 2.2.2:
ANY CRACK
FOUND. PART 2:CLOSE AC-
CESS.
-
(a) This action is not required for any repair found during the General Visual Inspection (GVI) of the affected
skin lap splice areas where a repair covers the affected inspection zones provided that the installed repair
was approved by The Boeing Company Organization Designation Authorization (ODA) via a FAA Form
8100-9 and inspections are accomplished in accordance with the scheduled repair approval listed on the
FAA Form 8100-9.
(b) It is not required to do the repeat inspection(s) at the skin lap splice locations where a repair covers the
affected inspection zones provided that the installed repair was approved by The Boeing Company Orga-
nization Designation Authorization (ODA) via a FAA Form 8100-9 and inspections are accomplished in
accordance with the scheduled repair approval listed on the FAA Form 8100-9.
(c) It is acceptable to change the repeat action from this OPTION to any other OPTION under this CONDITION.
Operators must comply with the compliance time given for the chosen OPTION under this CONDITION.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
36 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 37

Table 2: Fuselage Skin - Lap Splice - Inspection for any crack at specified locations of S-14R above the
aft cargo door.
Refer to the listed
procedures in SB
737-53-1399 Origi-
nal Issue or later
approved revi-
sions as an ac-
cepted proce-
dure.
Method of ComplianceActionCondition
PART 1: OPEN
ACCESS.
-Do a General Visual Inspection
(GVI) at each affected skin lap
splice location for any repair.
All airplanes.
-Group 1: FIGURE 20
-Group 2 Configuration 1:
FIGURE 21
-Group 2 Configuration 2:
FIGURE 22
-Group 3: FIGURE 23
-Group 4 Configuration 1:
FIGURE 24
-Group 4 Configuration 2:
FIGURE 25
-Group 5: FIGURE 26
-Group 6: FIGURE 27
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
37 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 38

Table 2: Fuselage Skin - Lap Splice - Inspection for any crack at specified locations of S-14R above the
aft cargo door.
Refer to the listed
procedures in SB
737-53-1399 Origi-
nal Issue or later
approved revi-
sions as an ac-
cepted proce-
dure.
Method of ComplianceActionCondition
--CONDITION 3, OPTION 1 (AC-
TION 1): Contact The Boeing
Company for alternative inspec-
tion(s) to Requirements Bulletin
737-53-1399 RB and do the in-
spection(s) and applicable on-
condition action(s). (a)
CONDITION 3:
ANY REPAIR FOUND.
-Group 1: FIGURE 28CONDITION 3, OPTION 1 (AC-
TION 2): Do a Detailed inspec-
tion, High Frequency Eddy Cur-
rent (HFEC) inspection and
(single element) Ultrasonic in-
spection at each affected skin
lap splice location for any crack
at the unrepaired areas.
-Group 2 Configuration 1:
FIGURE 29
-Group 2 Configuration 2:
FIGURE 30
-Group 3: FIGURE 31
-Group 4 Configuration 1:
FIGURE 32
-Group 4 Configuration 2:
FIGURE 33
-Group 5: FIGURE 34
-Group 6: FIGURE 35
--CONDITION 3, OPTION 2 (AC-
TION 1): Contact The Boeing
Company for alternative inspec-
tion(s) to Requirements Bulletin
737-53-1399 RB and do the in-
spection(s) and applicable on-
condition action(s). (a)
-Group 1: FIGURE 28CONDITION 3, OPTION 2 (AC-
TION 2): Do a Detailed inspec-
tion, High Frequency Eddy Cur-
rent (HFEC) inspection and
(phase array) Ultrasonic inspec-
tion at each affected skin lap
splice location for any crack at
the unrepaired areas.
-Group 2 Configuration 1:
FIGURE 29
-Group 2 Configuration 2:
FIGURE 30
-Group 3: FIGURE 31
-
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
38 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 39

Table 2: Fuselage Skin - Lap Splice - Inspection for any crack at specified locations of S-14R above the
aft cargo door.
Refer to the listed
procedures in SB
737-53-1399 Origi-
nal Issue or later
approved revi-
sions as an ac-
cepted proce-
dure.
Method of ComplianceActionCondition
Group 4 Configuration 1:
FIGURE 32
-Group 4 Configuration 2:
FIGURE 33
-Group 5: FIGURE 34
-Group 6: FIGURE 35
(c)Group 1: FIGURE 28CONDITION 3.1, OPTION 1:
Repeat the Detailed inspection,
HFEC inspection and (single el-
ement) Ultrasonic inspection at
each affected skin lap splice lo-
cation for any crack at the unre-
paired areas. (b)
CONDITION 3.1:
NO CRACK FOUND. Group 2 Configuration 1:
FIGURE 29
Group 2 Configuration 2:
FIGURE 30
Group 3: FIGURE 31
Group 4 Configuration 1:
FIGURE 32
Group 4 Configuration 2:
FIGURE 33
Group 5: FIGURE 34
Group 6: FIGURE 35
(c)Group 1: FIGURE 28CONDITION 3.1, OPTION 2:
Repeat the Detailed inspection,
HFEC inspection and (phase
array) Ultrasonic inspection at
each affected skin lap splice lo-
cation for any crack at the unre-
paired areas. (b)
Group 2 Configuration 1:
FIGURE 29
Group 2 Configuration 2:
FIGURE 30
Group 3: FIGURE 31
Group 4 Configuration 1:
FIGURE 32
Group 4 Configuration 2:
FIGURE 33
Group 5: FIGURE 34
Group 6: FIGURE 35
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
39 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 40

Table 2: Fuselage Skin - Lap Splice - Inspection for any crack at specified locations of S-14R above the
aft cargo door.
Refer to the listed
procedures in SB
737-53-1399 Origi-
nal Issue or later
approved revi-
sions as an ac-
cepted proce-
dure.
Method of ComplianceActionCondition
--Contact The Boeing Company
for repair instructions and do the
repair.
CONDITION 3.2:
ANY CRACK FOUND. PART 2: CLOSE
ACCESS.
-
-Group 1: FIGURE 28CONDITION 4, OPTION 1: Do
a Detailed inspection, HFEC in-
spection and (single element)
Ultrasonic inspection at each
affected skin lap splice location
for any crack.
CONDITION 4:
NO REPAIR FOUND. -Group 2 Configuration 1:
FIGURE 29
-Group 2 Configuration 2:
FIGURE 30
-Group 3: FIGURE 31
-Group 4 Configuration 1:
FIGURE 32
-Group 4 Configuration 2:
FIGURE 33
-Group 5: FIGURE 34
-Group 6: FIGURE 35
-Group 1: FIGURE 28CONDITION 4, OPTION 2: Do
a Detailed inspection, HFEC in-
spection and (phase array) Ultra-
sonic inspection at each affect-
ed skin lap splice location for
any crack.
-Group 2 Configuration 1:
FIGURE 29
-Group 2 Configuration 2:
FIGURE 30
-Group 3: FIGURE 31
-Group 4 Configuration 1:
FIGURE 32
-Group 4 Configuration 2:
FIGURE 33
-Group 5: FIGURE 34
-Group 6: FIGURE 35
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
40 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 41

Table 2: Fuselage Skin - Lap Splice - Inspection for any crack at specified locations of S-14R above the
aft cargo door.
Refer to the listed
procedures in SB
737-53-1399 Origi-
nal Issue or later
approved revi-
sions as an ac-
cepted proce-
dure.
Method of ComplianceActionCondition
(c)Group 1: FIGURE 28CONDITION 4.1, OPTION 1:
Repeat the Detailed inspection,
HFEC inspection and (single el-
ement) Ultrasonic inspection at
each affected skin lap splice lo-
cation for any crack.
CONDITION 4.1:
NO CRACK FOUND. Group 2 Configuration 1:
FIGURE 29
Group 2 Configuration 2:
FIGURE 30
Group 3: FIGURE 31
Group 4 Configuration 1:
FIGURE 32
Group 4 Configuration 2:
FIGURE 33
Group 5: FIGURE 34
Group 6: FIGURE 35
(c)Group 1: FIGURE 28CONDITION 4.1, OPTION 2:
Repeat the Detailed inspection,
HFEC inspection and (phase
array) Ultrasonic inspection at
each affected skin lap splice lo-
cation for any crack.
Group 2 Configuration 1:
FIGURE 29
Group 2 Configuration 2:
FIGURE 30
Group 3: FIGURE 31
Group 4 Configuration 1:
FIGURE 32
Group 4 Configuration 2:
FIGURE 33
Group 5: FIGURE 34
Group 6: FIGURE 35
--Contact The Boeing Company
for repair instructions and do the
repair.
CONDITION 4.2:
ANY CRACK FOUND. PART 2: CLOSE
ACCESS.
-
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
41 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 42

Table 2: Fuselage Skin - Lap Splice - Inspection for any crack at specified locations of S-14R above the
aft cargo door.
Refer to the listed
procedures in SB
737-53-1399 Origi-
nal Issue or later
approved revi-
sions as an ac-
cepted proce-
dure.
Method of ComplianceActionCondition
(a) This action is not required for any repair found during the General Visual Inspection (GVI) of the affected
skin lap splice areas where a repair covers the affected inspection zones provided that the installed repair
was approved by The Boeing Company Organization Designation Authorization (ODA) via a FAA Form
8100-9 and inspections are accomplished in accordance with the scheduled repair approval listed on the
FAA Form 8100-9.
(b) It is not required to do the repeat inspection(s) at the skin lap splice locations where a repair covers the
affected inspection zones provided that the installed repair was approved by The Boeing Company Orga-
nization Designation Authorization (ODA) via a FAA Form 8100-9 and inspections are accomplished in
accordance with the scheduled repair approval listed on the FAA Form 8100-9.
(c) It is acceptable to change the repeat action from this OPTION to any other OPTION under this CONDITION.
Operators must comply with the compliance time given for the chosen OPTION under this CONDITION.
Group 4, Configuration 2:
Table 3: Fuselage Skin - Lap Splice at S-4R - Inspection for any repair, any buckle, any wrinkle, any
bulge and any crack.
Refer to the listed
procedures in SB
737-53-1399 Origi-
nal Issue or later
approved revi-
sions as an ac-
cepted proce-
dure.
Method of ComplianceActionCondition
PART 1: OPEN
ACCESS
-Do a General Visual Inspection
(GVI) of the skin lap splice at S-4R
for any repair.
All airplanes.
-FIGURE 36
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
42 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 43

Group 4, Configuration 2:
Table 3: Fuselage Skin - Lap Splice at S-4R - Inspection for any repair, any buckle, any wrinkle, any
bulge and any crack.
Refer to the listed
procedures in SB
737-53-1399 Origi-
nal Issue or later
approved revi-
sions as an ac-
cepted proce-
dure.
Method of ComplianceActionCondition
--CONDITION 5 (ACTION 1): Con-
tact The Boeing Company for alter-
native inspection(s) to Require-
ments Bulletin 737-53-1399 RB and
do the inspection(s) and applicable
on-condition action(s). (a)
CONDITION 5:
ANY REPAIR FOUND.
-FIGURE 37CONDITION 5 (ACTION 2): Do an
external Detailed inspection of the
skin lap splice at S-4R for any skin
buckle, any wrinkle and any bulge
at the unrepaired areas.
-FIGURE 37Repeat the external Detailed inspec-
tion of the skin lap splice at S-4R
for any skin buckle, any wrinkle and
any bulge at the unrepaired areas.
(b)
CONDITION 5.1:
NO SKIN BUCKLE, NO
WRINKLE AND NO
BULGE FOUND.
-FIGURE 17CONDITION 5.2, OPTION 1: Do a
Detailed inspection, High Frequen-
cy Eddy Current (HFEC) inspection
and (single element) Ultrasonic in-
spection of the skin lap splice at S-
4R where any skin buckle, any
wrinkle or any bulge is found for
any crack at the unrepaired areas.
CONDITION 5.2:
ANY SKIN BUCKLE, ANY
WRINKLE OR ANY
BULGE FOUND.
-FIGURE 17CONDITION 5.2, OPTION 2: Do a
Detailed inspection, High Frequen-
cy Eddy Current (HFEC) inspection
and (phase array) Ultrasonic inspec-
tion of the skin lap splice at S-4R
where any skin buckle, any wrinkle
or any bulge is found for any crack
at the unrepaired areas.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
43 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 44

Group 4, Configuration 2:
Table 3: Fuselage Skin - Lap Splice at S-4R - Inspection for any repair, any buckle, any wrinkle, any
bulge and any crack.
Refer to the listed
procedures in SB
737-53-1399 Origi-
nal Issue or later
approved revi-
sions as an ac-
cepted proce-
dure.
Method of ComplianceActionCondition
(c)FIGURE 17CONDITION 5.2.1, OPTION 1: Re-
peat the Detailed inspection, HFEC
inspection and (single element) Ul-
trasonic inspection of the skin lap
splice at S-4R where any skin
buckle, any wrinkle or any bulge is
found for any crack at the unre-
paired areas. (b)
CONDITION 5.2.1:
NO CRACK FOUND.
(c)FIGURE 17CONDITION 5.2.1, OPTION 2: Re-
peat the Detailed inspection, HFEC
inspection and (phase array) Ultra-
sonic inspection of the skin lap
splice at S-4R where any skin
buckle, any wrinkle or any bulge is
found for any crack at the unre-
paired areas. (b)
--CONDITION 5.2.1, OPTION 3:
Contact The Boeing Company for
repair instructions and do the repair
for any skin buckle, any wrinkle or
any bulge.
--Contact The Boeing Company for
repair instructions and do the re-
pair.
CONDITION 5.2.2: ANY
CRACK FOUND. PART 2: CLOSE
ACCESS.
-
-FIGURE 37Do an external Detailed inspection
of the skin lap splice at S-4R for
any skin buckle, any wrinkle and
any bulge.
CONDITION 6:
NO REPAIR FOUND.
-FIGURE 37Repeat the external Detailed inspec-
tion of the skin lap splice at S-4R
for any skin buckle, any wrinkle and
any bulge.
CONDITION 6.1:
NO SKIN BUCKLE, NO
WRINKLE AND NO
BULGE FOUND.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
44 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 45

Group 4, Configuration 2:
Table 3: Fuselage Skin - Lap Splice at S-4R - Inspection for any repair, any buckle, any wrinkle, any
bulge and any crack.
Refer to the listed
procedures in SB
737-53-1399 Origi-
nal Issue or later
approved revi-
sions as an ac-
cepted proce-
dure.
Method of ComplianceActionCondition
-FIGURE 17CONDITION 6.2, OPTION 1: Do a
Detailed inspection, HFEC inspec-
tion and (single element) Ultrasonic
inspection of the skin lap splice at
S-4R where any skin buckle, any
wrinkle or any bulge is found for
any crack.
CONDITION 6.2:
ANY SKIN BUCKLE, ANY
WRINKLE OR ANY
BULGE FOUND.
-FIGURE 17CONDITION 6.2, OPTION 2: Do a
Detailed inspection, HFEC inspec-
tion and (phase array) Ultrasonic
inspection of the skin lap splice at
S-4R where any skin buckle, any
wrinkle or any bulge is found for
any crack.
(c)FIGURE 17CONDITION 6.2.1, OPTION 1: Re-
peat the Detailed inspection, HFEC
inspection and (single element) Ul-
trasonic inspection of the skin lap
splice at S-4R where any skin
buckle, any wrinkle or any bulge is
found for any crack.
CONDITION 6.2.1:
NO CRACK FOUND.
(c)FIGURE 17CONDITION 6.2.1, OPTION 2: Re-
peat the Detailed inspection, HFEC
inspection and (phase array) Ultra-
sonic inspection of the skin lap
splice at S-4R where any skin
buckle, any wrinkle or any bulge is
found for any crack.
(c)-CONDITION 6.2.1, OPTION 3:
Contact The Boeing Company for
repair instructions and do the repair
for any skin buckle, any wrinkle or
any bulge.
--Contact The Boeing Company for
repair instructions and do the re-
pair.
CONDITION 6.2.2: ANY
CRACK FOUND. PART 2: CLOSE
ACCESS.
-
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
45 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 46

Group 4, Configuration 2:
Table 3: Fuselage Skin - Lap Splice at S-4R - Inspection for any repair, any buckle, any wrinkle, any
bulge and any crack.
Refer to the listed
procedures in SB
737-53-1399 Origi-
nal Issue or later
approved revi-
sions as an ac-
cepted proce-
dure.
Method of ComplianceActionCondition
(a) This action is not required for any repair found during the General Visual Inspection (GVI) of the affected
skin lap splice areas where a repair covers the affected inspection zones provided that the installed repair
was approved by The Boeing Company Organization Designation Authorization (ODA) via a FAA Form
8100-9 and inspections are accomplished in accordance with the scheduled repair approval listed on the
FAA Form 8100-9.
(b) It is not required to do the repeat inspection(s) at the skin lap splice locations where a repair covers the
affected inspection zones provided that the installed repair was approved by The Boeing Company Orga-
nization Designation Authorization (ODA) via a FAA Form 8100-9 and inspections are accomplished in
accordance with the scheduled repair approval listed on the FAA Form 8100-9.
(c) It is acceptable to change the repeat action from this OPTION to any other OPTION under this CONDITION.
Operators must comply with the compliance time given for the chosen OPTION under this CONDITION.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1: March 14, 2023
46 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 47 (OCR)

REQUIREMENTS BULLETIN 737-53-1399
This Figure applies only to: Group 1.
0000000000  0000000000000000
•000  000
000000
....
FIGURE 1: FUSELAGE SKIN - LAP SPLICE AT S-14L AND S-14R BETWEEN STA 360 AND STA 888 -
GENERAL VISUAL INSPECTION
(SHEET 1 OF 2)
Original Issue: May 20, 2022
Revision 1 March 14, 2023  737-53-1399 RB
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  47 of 156

### Page 48

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)-S-14R, STA 360 TO
STA 400
SKINInspect1
(a)-S-14R, STA 440 TO
STA 520
SKINInspect
(a)-S-14R, STA 727A TO
STA 727B
SKINInspect
(a)-S-14R, STA 827 TO
STA 888
SKINInspect
(a)-S-14L, STA 360 TO
STA 400
SKINInspect2
(a)-S-14L, STA 482A TO
STA 520
SKINInspect
(a)-S-14L, STA 727A TO
727C
SKINInspect
(a) Do a general visual inspection of the fuselage skin along the skin lap splice for any repair.
FIGURE 1: FUSELAGE SKIN - LAP SPLICE AT S-14L AND S-14R BETWEEN STA 360 AND STA 888 -
GENERAL VISUAL INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1 March 14, 2023
48 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 49 (OCR)

REQUIREMENTS BULLETIN 737-53-1399
This Figure applies only to: Group 2, Configuration 1.
0000000000
000000
0000
VIS  8009  0009
09₺
•
....  ....
FIGURE 2: FUSELAGE SKIN - LAP SPLICE AT S-14L, S-14R, AND S-24R BETWEEN STA 360 AND STA
888 - GENERAL VISUAL INSPECTION
(SHEET 1 OF 2)
Original Issue: May 20, 2022
Revision 1 March 14, 2023  737-53-1399 RB
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  49 of 156

### Page 50

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)-S-24R, STA 400 TO
STA 420
SKINInspect1
(a)-S-14R, STA 360 TO
STA 400
SKINInspect2
(a)-S-14R, STA 420 TO
STA 460
SKINInspect
(a)-S-14R, STA 480 TO
STA 500B
SKINInspect
(a)-S-14R, STA 500C TO
STA 520
SKINInspect
(a)-S-14R, STA 827 TO
STA 888
SKINInspect
(a)-S-14L, STA 360 TO
STA 400
SKINInspect3
(a)-S-14L, STA 500C TO
STA 520
SKINInspect
(a) Do a general visual inspection of the fuselage skin along the skin lap splice for any repair.
FIGURE 2: FUSELAGE SKIN - LAP SPLICE AT S-14L, S-14R, AND S-24R BETWEEN STA 360 AND STA
888 - GENERAL VISUAL INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1 March 14, 2023
50 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 51 (OCR)

REQUIREMENTS BULLETIN 737-53-1399
This Figure applies only to: Group 2, Configuration 2.
00000
10000
•
000
VIS  8005
00
09₺
•
.....
FIGURE 3: FUSELAGE SKIN - LAP SPLICE AT S-14L, S-14R, AND S-24R BETWEEN STA 360 AND STA
888 - GENERAL VISUAL INSPECTION
(SHEET 1 OF 2)
Original Issue: May 20, 2022
Revision 1 March 14, 2023  737-53-1399 RB
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  51 of 156

### Page 52

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)-S-24R, STA 400 TO
STA 420
SKINInspect1
(a)-S-14R, STA 360 TO
STA 400
SKINInspect2
(a)-S-14R, STA 420 TO
STA 460
SKINInspect
(a)-S-14R, STA 480 TO
STA 500B
SKINInspect
(a)-S-14R, STA 500C TO
STA 520
SKINInspect
(a)-S-14R, STA 867 TO
STA 888
SKINInspect
(a)-S-14L, STA 360 TO
STA 400
SKINInspect3
(a)-S-14L, STA 500C TO
STA 520
SKINInspect
(a) Do a general visual inspection of the fuselage skin along the skin lap splice for any repair.
FIGURE 3: FUSELAGE SKIN - LAP SPLICE AT S-14L, S-14R, AND S-24R BETWEEN STA 360 AND STA
888 - GENERAL VISUAL INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1 March 14, 2023
52 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 53 (OCR)

REQUIREMENTS BULLETIN 737-53-1399
This Figure applies only to: Group 3.
00000000000000000 00000  00000
029
VIS  8009  0000000  0000  0009
VIS
.....
FIGURE 4: FUSELAGE SKIN - LAP SPLICE AT S-14R AND S-24R BETWEEN STA 360 AND STA 888 -
GENERAL VISUAL INSPECTION
(SHEET 1 OF 2)
Original Issue: May 20, 2022
Revision 1 March 14, 2023  737-53-1399 RB
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  53 of 156

### Page 54

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)-S-24R, STA 400 TO
STA 420
SKINInspect1
(a)-S-14R, STA 360 TO
STA 460
SKINInspect2
(a)-S-14R, STA 480 TO
STA 500B
SKINInspect
(a)-S-14R, STA 500C TO
STA 520
SKINInspect
(a)-S-14R, STA 867 TO
STA 888
SKINInspect
(a) Do a general visual inspection of the fuselage skin along the skin lap splice for any repair.
FIGURE 4: FUSELAGE SKIN - LAP SPLICE AT S-14R AND S-24R BETWEEN STA 360 AND STA 888 -
GENERAL VISUAL INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1 March 14, 2023
54 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 55 (OCR)

REQUIREMENTS BULLETIN 737-53-1399
This Figure applies only to: Group 4, Configuration 1.
....
0000000  00000000000000
00000000000  0000
VIS  8009
000  000000000
J
00 00
FIGURE 5: FUSELAGE SKIN - LAP SPLICE AT S-14L, S-14R, AND S-24R BETWEEN STA 360 AND STA
888 - GENERAL VISUAL INSPECTION
(SHEET 1 OF 2)
Original Issue: May 20, 2022
Revision 1 March 14, 2023  737-53-1399 RB
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  55 of 156

### Page 56

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)-S-24R, STA 400 TO
STA 420
SKINInspect1
(a)-S-14R, STA 360 TO
STA 400
SKINInspect2
(a)-S-14R, STA 420 TO
STA 500B
SKINInspect
(a)-S-14R, STA 827 TO
STA 888
SKINInspect
(a)-S-14L, STA 360 TO
STA 400
SKINInspect3
(a) Do a general visual inspection of the fuselage skin along the skin lap splice for any repair.
FIGURE 5: FUSELAGE SKIN - LAP SPLICE AT S-14L, S-14R, AND S-24R BETWEEN STA 360 AND STA
888 - GENERAL VISUAL INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1 March 14, 2023
56 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 57 (OCR)

REQUIREMENTS BULLETIN 737-53-1399
This Figure applies only to: Group 4, Configuration 2.
000000000000  000000000000
VIS
000
VIS  0+9  00000
WIS  HOOS
8009  0000000000
00 00  208967
FIGURE 6: FUSELAGE SKIN - LAP SPLICE AT S-14R AND S-24R BETWEEN STA 360 AND STA 888 -
GENERAL VISUAL INSPECTION
(SHEET 1 OF 2)
Original Issue: May 20, 2022
Revision 1 March 14, 2023  737-53-1399 RB
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  57 of 156

### Page 58

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)-S-24R, STA 400 TO
STA 420
SKINInspect1
(a)-S-14R, STA 360 TO
STA 400
SKINInspect2
(a)-S-14R, STA 420 TO
STA 500B
SKINInspect
(a)-S-14R, STA 827 TO
STA 888
SKINInspect
(a) Do a general visual inspection of the fuselage skin along the skin lap splice for any repair.
FIGURE 6: FUSELAGE SKIN - LAP SPLICE AT S-14R AND S-24R BETWEEN STA 360 AND STA 888 -
GENERAL VISUAL INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1 March 14, 2023
58 of 156
REQUIREMENTS BULLETIN 737-53-1399

### Page 59 (OCR)

REQUIREMENTS BULLETIN 737-53-1399
This Figure applies only to: Group 5.
00000000000000
000
000
0000000000000000000  000000000000000
2958403
FIGURE 7: FUSELAGE SKIN - LAP SPLICE AT S-14L AND S-14R BETWEEN STA 360 AND STA 888 -
GENERAL VISUAL INSPECTION
(SHEET 1 OF 2)
Original Issue: May 20, 2022
Revision 1 March 14, 2023  Export Controlled ECCN: 9E991  737-53-1399 RB
Copyright © Unpublished Work - See page 1 for details.  59 of 156

### Page 60

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)-S-14R, STA 360 TO
STA 400
SKINInspect1
(a)-S-14R, STA 420 TO
STA 500B
SKINInspect
(a)-S-14R, STA 847 TO
STA 888
SKINInspect
(a)-S-14L, STA 360 TO
STA 400
SKINInspect2
(a) Do a general visual inspection of the fuselage skin along the skin lap splice for any repair.
FIGURE 7: FUSELAGE SKIN - LAP SPLICE AT S-14L AND S-14R BETWEEN STA 360 AND STA 888 -
GENERAL VISUAL INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 20, 2022
737-53-1399 RBRevision 1 March 14, 2023
60 of 156
REQUIREMENTS BULLETIN 737-53-1399

The text continues at https://openairdocs.org/service-documents/boeing/737-53-1399-rb/file/70860943cd7c.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
