# Boeing Alert Service Bulletin 737-53A1214: Revision 4

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0645; AD 2012-18-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 737-53A1214](https://openairdocs.org/service-documents/boeing/737-53a1214.md)
- Title as filed: U.S. DOT/FAA - SB-737-53A1214-04
- Pages: 73
- PDF: https://openairdocs.org/files/sha256/66/2b/662b650990533c238c526c822915b8ff9314e75ae2d7131d7a953be94fa70437
- Page: https://openairdocs.org/service-documents/boeing/737-53a1214/file/662b65099053

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-53A1214
Original Issue: June 17, 1999
Revision 4: December 16, 2011
ATA System: 5311
SUBJECT: FUSELAGE - Body Station 1016 Aft Pressure Bulkhead Web Cracks - Inspection and
Repair
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 1999 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
1 of 73
5.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
2 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ...................................................... 7
1. PLANNING INFORMATION ........................................ 1 1
A. Effectivity ............................................... 1 1
1. Airplanes ............................................ 1 1
2. Spares Affected ........................................ 2 2
B. Concurrent Requirements ...................................... 2 3
C. Reason ................................................ 2 3
D. Description .............................................. 2 4
E. Compliance .............................................. 2 6
F. Approval ............................................... 3 4
G. Manpower .............................................. 3 4
H. Weight and Balance Changes .................................... 3 6
I. Electrical Load Data ......................................... 3 6
J. References .............................................. 3 6
1. Existing Data: ......................................... 3 6
2. Data supplied with this Service Bulletin: ........................... 3 7
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 3 7
K. Publications Affected ........................................ 3 7
L. Interchangeability and Intermixability of Parts ........................... 3 7
2. MATERIAL INFORMATION ........................................ 3 9
A. Material - Price and Availability ................................... 3 9
B. Industry Support Information .................................... 3 9
C. Parts Necessary For Each Airplane ................................. 3 9
1. Kits/Parts: ........................................... 3 9
2. Parts and Materials Supplied by the Operator: ........................ 3 9
3. Parts Modified and Reidentified: ............................... 3 9
4. Parts Removed and Not Replaced: .............................. 3 9
D. Parts Necessary to Change Spares ................................. 3 9
E. Special Tooling - Price and Availability ............................... 3 9
F. Special Tooling Necessary to do this Service Bulletin ....................... 3 9
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 4 1
A. GENERAL INFORMATION ..................................... 4 1
B. WORK INSTRUCTIONS ....................................... 4 2
FIGURE 1: LFEC INSPECTION OF THE WEB AT THE "Y" CHORD IN THE UPPER BULKHEAD FROM
STRINGER S-15L TO S-15R ................................. 4 8
FIGURE 2: HFEC INSPECTION OF THE WEB AT THE "Y" CHORD IN THE UPPER BULKHEAD FROM
STRINGER S-15L TO S-15R ................................. 5 0
FIGURE 3: ONE-TIME NDT INSPECTION OF WEB AT THE OUTER CIRCUMFERENTIAL TEAR STRAP
.................................................. 5 2
FIGURE 4: NDT INSPECTION OF WEB AT THE "Y" CHORD IN THE LOWER BULKHEAD FROM
STRINGER S-15LTO S-15R .................................. 5 4
FIGURE 5: DETAILED INSPECTION FOR OIL-CAN DAMAGE IN THE BULKHEAD WEB ...... 5 6
FIGURE 6: NDT INSPECTION OF THE DOME CAP AT THE CENTER OF THE BULKHEAD ..... 5 8
FIGURE 7: NDT INSPECTION OF THE FORWARD FLANGE OF THE "Z" STIFFENER AT THE DOME
C A P............................................... 6 0
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
3 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 4

Appendix A: OBSOLETE 737-100/200 SRM 53-10-4 FIGURE 3 OR 737-300/400/500 53-80-08 REPAIR 1 -
TYPICAL REPAIR FOR DAMAGE TO WEB AND STRAP .................. 6 3
Appendix B: OBSOLETE 737-100/200 SRM 53-10-4 FIGURE 3 OR 737-300/400/500 53-80-08 REPAIR 1 -
TYPICAL REPAIR FOR DAMAGE TO WEB ......................... 6 5
Appendix C: OBSOLETE 737-100/200 SRM 53-10-4, FIGURE 5 OR 737-300/400/500 SRM 53-80-08 REPAIR
2 ................................................. 6 6
Appendix D: OBSOLETE 737-100/200 SRM 53-10-4 FIGURE 12 OR 737-300/400/500 SRM 53-80-08 REPAIR
4 ................................................. 6 8
Appendix E: OBSOLETE 737-100/200 SRM 53-10-4 FIGURE 13 OR 737-300/400/500 SRM 53-80-08 REPAIR
5 ................................................. 7 1
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
4 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 5

Commercial 
Airplanes
737
Service Bulletin
ALERT
Revision Transmittal SheetNumber: 737-53A1214Original Issue: June 17, 1999
Revision 4: December 16, 2011
ATA System: 5311
SUBJECT: FUSELAGE - Body Station 1016 Aft Pressure Bulkhead Web Cracks - Inspection and
Repair
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
No more work is necessary on the airplanes changed in accordance with Revision 3 of this service bulletin.
REASON FOR REVISION
This revision is sent to change the compliance time for Detailed Inspection for Oil-Cans and to delete incorrect
paragraph reference in Paragraph 3.B., Work Instructions, Part VI.
These sections were changed:
1. Summary Background: FAA Airworthiness Directive statement deleted. SIIA and SRP statements added.
2. Paragraph 1.C., Reason: FAA Airworthiness Directive statement deleted.
3. Paragraph 1.E., Compliance: Table 4, Compliance Time changed. Table 8 SRM reference corrected.
4. Paragraph 1.J.1., Existing Data: Revised.
5. Paragraph 3.A., General Information: Note 5 revised. Note 9 and 10 added.
6. Paragraph 3.B., Work Instructions: Part I, step 5. note, SRM reference corrected.
7. Paragraph 3.B., Work Instructions: Part VI, step 1.b. and 1.c., incorrect paragraph reference removed.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
June 17, 1999Original Issue:
June 22, 2000Revision 1:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
5 of 73

### Page 6

May 24, 2001Revision 2:
January 19, 2011Revision 3:
December 16, 2011Revision 4:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
6 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 7

Commercial 
Airplanes
737
Service Bulletin
ALERT
SummaryNumber: 737-53A1214Original Issue: June 17, 1999
Revision 4: December 16, 2011
ATA System: 5311
SUBJECT: FUSELAGE - Body Station 1016 Aft Pressure Bulkhead Web Cracks - Inspection and
Repair
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
CONCURRENT REQUIREMENTS
None
BACKGROUND
Cracks have been reported in four general areas on the aft pressure bulkhead: cracks in the web at the web-to-"Y"
chord interface; cracks in the web at the outer circumferential tear strap; cracks in the web near the dome cap;
and cracks in the "Z" stiffeners near the dome cap. Undetected cracking could result in loss of ability to maintain
cabin pressure, rapid decompression of the airplane, and significant structural damage to the aft fuselage.
Cracks reported in the web at the web-to-"Y" chord interface occurred in the aft row of fasteners connecting the
web to the "Y" chord. In all of the cases, the cracks ran in the circumferential direction. Most of the cracks have
been at Stringer S-6L and S-6R, but there have been reports of cracks at other locations. The airplanes had
accumulated between 22,966 and 68,000 flight cycles and between 45,500 and 61,000 flight hours.
There have been two reports of cracking in the bulkhead web at the outer circumferential tear strap. The airplanes
had 21,246 and 26,162 flight cycles and 17,500 and 24,132 flight hours respectively.
Since revision 2 of this service bulletin, there have been reports of cracking in the center of the web near the
dome cap. The cracks occurred at the center of the bulkhead at the end of the web gore sections. The airplanes
had accumulated more than 30,000 flight cycles and 36,000 flight hours. There have also been two reports of
cracks located on the "Z" stiffeners forward flange at the attach location to the dome cap pan. The cracks
extended from the outboard fastener hole and ran circumferentially.
Boeing Structural Item Interim Advisory (SIIA) SIIA 737-52 and SIIA 737-269 are related to this service bulletin.
Boeing Service Related Problem (SRP) 737-SRP-53-0109, 737-SRP-53-0116, and 737-SRP-53-0155 are related
to this service bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
7 of 73

### Page 8

ACTION (PRR 35005-229R)
Get access to the forward or aft side of the aft pressure bulkhead and do a Non-Destructive Test (NDT) inspection
for any cracking in the web at the "Y" chord. If damage is found from the aft side, get access to the forward side
of the bulkhead and do a High Frequency Eddy Current (HFEC) inspection for any cracking in the web at the
"Y" chord for the section of web where the damage was found. If any cracking is found, repair the crack(s) in
accordance with the Structural Repair Manual (SRM) or contact Boeing for repair instructions.
From either side of the bulkhead, do a NDT inspection for any cracking in the web at the outer circumferential
tear strap for 360 degrees. Also, do an inspection for oil-canning in the web of the entire bulkhead and do repeat
inspections at the times shown in the Compliance Section. If you find any cracking, repair the crack(s) in
accordance with the SRM or contact Boeing.
From the aft side of the bulkhead, do a NDT inspection for any cracking in the bulkhead web at the lap joints.
Do the inspection from the edge of the gore section at the center of bulkhead to approximately ten inches
outboard of the center. Do repeat inspections at the times shown in the Compliance Section. If you find any
cracking, contact Boeing or repair the crack(s) in accordance with the SRM.
EFFECTIVITY
All 737-100/-200/-200C/-300/-400/-500 Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected
airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Federal Aviation Administration (FAA) Airworthiness Directive AD 99-08-23, is related to this service bulletin.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection, and/or repair procedures given in this service
bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
8 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 9 (OCR)

BOEING SERVICE BULLETIN 737-53A1214
ALERT  ALERT
NDT INSPECT THE WEB FOR CRACKING AT
THE OUTER CIRCUMFERENTIAL TEAR STRAP
BL  VISUALLY INSPECT THE
WEB FOR OIL-CANNING
S-7L-  -S-7R
ACCESS
DOOR
"Y" CHORD
FRAME
CHORD
S-15L  ~S-15R
FWD
- WEB
INSPECT THE WEB ALONG THE AFT ROW  NDT INSPECT THE
OF FASTENERS USING EDDY CURRENT  WEB FOR CRACKING
AND VISUAL INSPECTION  A-A  AT THE CENTER OF
B-B  VIEW LOOKING FORWARD  THE BULKHEAD
DOME PAN
"Z" STIFFENER
(TYPICAL)
WEB
(TYPICAL)
FWD
NDT INSPECT THE "Z" STIFFENER FLANGE
WHERE IT ATTACHES TO THE DOME PAN
(24 PLACES)  C-C  S62272
Original Issue: June 17, 1999
Revision 4: December 16, 2011  737-53A1214
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  9 of 73

### Page 10

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
10 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT
BLANK PAGE

### Page 11

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-53A1214
Original Issue: June 17, 1999
Revision 4: December 16, 2011
ATA System: 5311
SUBJECT: FUSELAGE - Body Station 1016 Aft Pressure Bulkhead Web Cracks - Inspection and
Repair
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D6-19567 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is for the airplanes shown below. Refer to PRR 35005-229R for data about
this change.
DESCRIPTIONCONFIGURATIONGROUP
All 737-100/200/200C/300/400/500 Series Airplanes, Line Numbers
1-3132.
-1
Airplane Models:
737-100, 737-200, 737-200C, 737-300, 737-400, 737-500
GroupVariable Number
1PA001 - PA022
1PA099
1PA231 - PA232
1PC001 - PC005
1PG001 - PG075
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
11 of 73

### Page 12

GroupVariable Number
1PG199
1PG201 - PG230
1PG251 - PG255
1PG271 - PG279
1PG301 - PG314
1PG331 - PG332
1PG351 - PG356
1PG375
1PG401 - PG403
1PG431 - PG442
1PG471 - PG475
1PG501 - PG505
1PG571 - PG586
1PG621 - PG630
1PG651 - PG652
1PG701 - PG705
1PH001
1PH011 - PH013
1PH021 - PH024
1PH701 - PH715
1PH731 - PH732
1PH741 - PH743
1PJ001 - PJ009
1PJ031 - PJ032
1PJ071 - PJ072
1PJ101 - PJ119
1PJ201 - PJ219
1PJ301 - PJ302
1PJ551 - PJ561
1PJ601 - PJ615
1PJ811
1PJ816 - PJ817
1PK026 - PK029
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
12 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 13

GroupVariable Number
1PK041 - PK053
1PK061 - PK070
1PK081 - PK082
1PK091 - PK099
1PK101 - PK103
1PK111 - PK120
1PK141 - PK146
1PK201 - PK204
1PK211 - PK223
1PK231 - PK241
1PK251 - PK258
1PK271 - PK274
1PK281 - PK289
1PK291
1PK301 - PK318
1PK341
1PK351 - PK361
1PK391
1PK431 - PK433
1PK451 - PK452
1PK461 - PK469
1PK495
1PK501 - PK504
1PK511 - PK515
1PK519
1PK521 - PK528
1PK541 - PK565
1PK581
1PK591 - PK599
1PK601 - PK617
1PK621 - PK637
1PK641 - PK642
1PK661 - PK666
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
13 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 14

GroupVariable Number
1PK671 - PK681
1PK691 - PK697
1PK711 - PK716
1PK731 - PK765
1PK771 - PK779
1PK801 - PK804
1PK819 - PK827
1PK830
1PK861 - PK863
1PK871 - PK874
1PK881 - PK884
1PK901 - PK938
1PK971 - PK974
1PL001 - PL028
1PL061
1PL081
1PL101 - PL113
1PL151
1PL171 - PL172
1PL201 - PL203
1PL221
1PL401 - PL417
1PL421
1PL441
1PL451 - PL456
1PL471
1PL491
1PL501 - PL506
1PL551 - PL562
1PL581
1PL601 - PL603
1PL611
1PL621 - PL626
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
14 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 15

GroupVariable Number
1PL631 - PL632
1PL711 - PL712
1PL716 - PL747
1PL756
1PL758
1PL761 - PL770
1PL781 - PL788
1PL793
1PL801 - PL803
1PM001 - PM006
1PM016 - PM017
1PM021 - PM023
1PM051 - PM066
1PM101 - PM119
1PM141 - PM142
1PM171
1PM181
1PM251 - PM255
1PM281 - PM283
1PM381 - PM399
1PM401 - PM417
1PM541 - PM564
1PN001 - PN002
1PN021 - PN043
1PN081 - PN086
1PN101 - PN117
1PN131 - PN163
1PN401 - PN420
1PN431 - PN433
1PN451 - PN456
1PN471 - PN474
1PN481
1PN491 - PN493
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
15 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 16

GroupVariable Number
1PN501 - PN502
1PN511 - PN512
1PN521
1PP001 - PP054
1PP101 - PP169
1PP181 - PP199
1PP201 - PP205
1PP221
1PP231 - PP243
1PP281 - PP286
1PP301 - PP305
1PP351 - PP353
1PP376 - PP384
1PP391 - PP393
1PP401 - PP440
1PP471 - PP475
1PP501 - PP522
1PP631 - PP634
1PP651 - PP652
1PP671 - PP699
1PP701 - PP733
1PP771 - PP779
1PP801 - PP808
1PP821 - PP827
1PP831 - PP848
1PP851 - PP852
1PP861 - PP877
1PP891 - PP899
1PP901 - PP936
1PP946 - PP948
1PP951 - PP952
1PP961 - PP967
1PP981 - PP991
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
16 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 17

GroupVariable Number
1PP993
1PQ001 - PQ016
1PQ026 - PQ041
1PQ051 - PQ092
1PQ101 - PQ199
1PQ201 - PQ202
1PQ221 - PQ237
1PQ241 - PQ243
1PQ251 - PQ267
1PQ281 - PQ299
1PQ301 - PQ307
1PQ331 - PQ332
1PQ341 - PQ348
1PQ361 - PQ373
1PQ391 - PQ395
1PQ401 - PQ418
1PQ421
1PQ431 - PQ438
1PQ447 - PQ448
1PQ451
1PQ454
1PQ471 - PQ475
1PQ479 - PQ481
1PQ486 - PQ487
1PQ491 - PQ493
1PQ771 - PQ772
1PQ791 - PQ793
1PQ801 - PQ805
1PQ931 - PQ935
1PQ951
1PQ971 - PQ997
1PR001 - PR017
1PR021 - PR034
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
17 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 18

GroupVariable Number
1PR041 - PR045
1PR061 - PR072
1PR077 - PR082
1PR091 - PR092
1PR096
1PR101
1PR121 - PR122
1PR131 - PR132
1PR141 - PR143
1PR161 - PR172
1PR181
1PS601 - PS631
1PS636 - PS638
1PS641 - PS644
1PS651 - PS657
1PS666 - PS669
1PS691 - PS692
1PS701 - PS706
1PS751 - PS799
1PS811
1PS836 - PS837
1PS841 - PS846
1PS851 - PS852
1PS856
1PS861 - PS863
1PS866 - PS868
1PS871 - PS874
1PS896 - PS897
1PS901 - PS941
1PS956 - PS957
1PS961 - PS963
1PS971 - PS978
1PT001 - PT015
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
18 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 19

GroupVariable Number
1PT021 - PT031
1PT041 - PT064
1PT101 - PT105
1PT121 - PT138
1PT146 - PT148
1PT161 - PT170
1PT181 - PT188
1PT211 - PT220
1PT295
1PT301 - PT309
1PT331 - PT360
1PT381 - PT399
1PT401 - PT438
1PT501 - PT517
1PT561 - PT565
1PT581 - PT586
1PT611 - PT621
1PT641 - PT644
1PT651 - PT656
1PT671 - PT672
1PT681 - PT685
1PT701 - PT703
1PT716 - PT717
1PT721 - PT725
1PT801 - PT834
1PT851 - PT854
1PT871 - PT886
1PT901 - PT930
1PT971 - PT973
1PT981 - PT985
1PT996
1PU001 - PU025
1PU301
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
19 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 20

GroupVariable Number
1PU311 - PU313
1PV001 - PV055
1PV201 - PV209
1PV226 - PV229
1PV231 - PV237
1PV271 - PV272
1PV281 - PV287
1PV296
1PV301 - PV302
1PV351
1PV356 - PV357
1PW001 - PW054
1PW061 - PW068
1PW072
1PW086 - PW088
1PW091 - PW094
1PW101 - PW102
1PW106
1PW111 - PW120
1PW156 - PW157
1PW161 - PW171
1PW201 - PW252
1PW261 - PW268
1PW271 - PW276
1PW278
1PW281 - PW293
1PW296
1PW301 - PW327
1PW401 - PW408
1PW411 - PW418
1PW421 - PW424
1PW431 - PW435
1PW441 - PW450
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
20 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 21

GroupVariable Number
1PW461 - PW467
1PW501 - PW504
1PW511 - PW522
1PW524 - PW550
1PW556 - PW557
1PW561 - PW564
1PW571 - PW576
1PW591 - PW596
1PW611 - PW622
1PW631 - PW637
1PW661 - PW662
1PW681 - PW683
1PW701 - PW702
1PW711 - PW717
1PW741 - PW742
1PW761
1PW771
1PW831
1PW851 - PW856
1PX071
1PX701
1PY001 - PY008
1PY021 - PY022
1PY031
1PY036 - PY037
1PY046 - PY048
1PY051 - PY053
1PY056 - PY057
1PY101 - PY103
1PY111 - PY113
1PY131 - PY135
1PY141 - PY143
1PY151 - PY154
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
21 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 22

GroupVariable Number
1PY156 - PY157
1PY161 - PY162
1PY166
1PY191
1PY201
1PY221 - PY222
1PY231
1PY241 - PY244
1PY270 - PY275
1PY281
1PY286
1PY301 - PY304
1PY321 - PY323
1PY341 - PY346
1PY361 - PY362
1PY381
1PY401
1PY409 - PY411
1PY421 - PY422
1PY441
1PY451
1PY461 - PY463
1PY591 - PY595
1PY611 - PY612
1PY621
1PY631
1PY651
1PY671 - PY672
1PY721
1PY741
2. Spares Affected
None
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
22 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 23

B. Concurrent Requirements
None
C. Reason
Cracks have been reported in four general areas on the aft pressure bulkhead: cracks in the web at
the web-to-"Y" chord interface; cracks in the web at the outer circumferential tear strap; cracks in the
web near the dome cap; and cracks in the "Z" stiffeners near the dome cap. Undetected cracking could
result in loss of ability to maintain cabin pressure, rapid decompression of the airplane, and significant
structural damage to the aft fuselage.
As of the initial release of this service bulletin, six operators had reported finding cracks in the aft
pressure bulkhead web of sixteen 737-200 and -300 airplanes. In all of the cases, the cracks ran in
the circumferential direction along the aft row of fasteners connecting the web assembly to the bulkhead
"Y" chord. Fifteen airplanes had cracks at Stringer (S)-6L and one airplane had cracks at S-6L and
S-6R. The airplanes had accumulated between 25,500 and 68,000 flight cycles and between 45,500
and 61,000 flight hours.
Since the initial release of this bulletin, there have been additional reports of cracking. The cracks were
similar to the previously reported cracks. Cracks have been reported on airplanes with a range of
between 22,966 and 67,937 flight cycles.
Also, there have been two reports of cracking in the bulkhead web at the outer circumferential tear
strap. The first report happened in 1978 and resulted in the release of a Structural Item Interim Advisory
(SIIA) SIIA 737-52. In that event, the airplane experienced a sudden cabin pressure drop as a result
of a 42 inch crack in the bulkhead web. The crack ran along the outer circumferential tear strap from
S-15R to S-21, turned 90 degrees inwards and ran along the radial stiffener at S-21R, stopping at the
middle circumferential tear strap. The second report happened in January of 1999 and resulted in the
release of SIIA 737-269. The operator discovered an eight inch crack during a heavy maintenance
check. The crack ran along the outer circumferential tear strap from S-15R to S-18R. The airplanes
had 21,246 and 26,162 flight cycles and 17,500 and 24,132 flight hours respectively.
Since revision 2 of this bulletin, there have been reports of cracking in the web near the dome cap.
The cracks occurred at the center of the bulkhead at the edge of web gore sections. The airplanes had
accumulated more than 30,000 flight cycles and 36,000 flight hours. There have also been reports of
cracking in the radial "Z" stiffeners where they attach to the dome cap. The cracks extended from the
outboard fastener hole and ran circumferentially.
Revision 1 was sent to:
— Modify Industry Support Information.
— add an SRM repair reference for repairing cracking in the web periphery at S-6L or S-6R.
— add a visual inspection for oil-canning for the entire bulkhead web.
— add an NDT inspection for cracking in the web at the outer circumferential tear strap around the
entire bulkhead.
— add an inspection for cracking in the web at the "Y" chord below S-15L and S-15R.
Revision 2 was sent to:
— Clarify the inspection threshold in the compliance section.
— Change two SRM figure references and add a note. The note states that more work is required if
an operator used the wrong SRM figure to do a web crack repair.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
23 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 24

Revision 3 was sent to:
— Add an inspection for cracking in the web joints in the center of the aft pressure bulkhead.
— Add inspections for cracking in the radial "Z" stiffeners where they attach to the dome cap.
— Add repeat inspections for oil cans.
— Add Appendices A to D to show post repair inspections for repairs that have been deleted from
the SRM.
— Add Appendix E to show the removal and replacement of a repair that has been deleted from the
SRM.
— Add SRM references for new oil can repairs and repairs for web cracking at the center of the
bulkhead.
— Change the Industry Support Information statement.
— Clarify the inspection in Figure 1, step 2.
Revision 4 is sent to change the compliance time for Detailed Inspection for Oil-Cans and to delete
incorrect paragraph reference in Paragraph 3.B., Work Instructions, Part VI.
Boeing Service Related Problem (SRP) 737-SRP-53-0109, 737-SRP-53-0116, and 737-SRP-53-0155
are related to this service bulletin.
D. Description
Inspect the web for cracking at the "Y" chord in the upper bulkhead from S-15L to S-15R:
— Get access to the aft side of the aft pressure bulkhead and do a Low Frequency Eddy Current
(LFEC) inspection for any cracking in the web periphery. Do the inspection for circumferential
cracking in the web where it attaches to the "Y" chord along the aft row of fasteners. Do the
inspection in the upper fuselage from S-15L to S-15R. Also do a Detailed Inspection for any cracking
in the web and for any incorrectly drilled or elongated fastener hole(s).
— If either cracking, incorrectly drilled fastener hole or elongated fastener hole is found, you must
get access to the forward side of the bulkhead and do a High Frequency Eddy Current (HFEC)
inspection for any cracking and a Detailed Inspection from the forward side. Do the HFEC
inspections for circumferential cracking along the aft row of fasteners at the "Y" chord for the section
of web where the cracking, incorrectly drilled fastener hole or elongated fastener hole was found.
It is not necessary to do the HFEC inspection beyond the web splices of the web section containing
the cracking, incorrectly drilled fastener hole or elongated fastener hole. Do the Detailed Inspection
for any cracking in the web and for any incorrectly drilled or elongated fastener hole(s). If you find
damage at S-6L or S-6R, repair it as shown in the 737-100/200 or 737-300/400/500 SRM as
applicable. If you install the SRM repair, there are future inspection requirements as defined in the
SRM repair. If you find any cracking in the web periphery that is not covered by the SRM, contact
Boeing for repair instructions and install the repair.
— As an option to doing the inspections on the aft side of the bulkhead, you can do the HFEC and
Detailed Inspection from the forward side of the bulkhead directly at less frequent intervals.
— Do repeat inspections at the times shown in Paragraph 1.E., Compliance. Once the SRM repair
is accomplished, subsequent inspections become less frequent.
Inspect the web for cracking at the "Y" chord in the lower bulkhead from S-15L to S-15R:
— This inspection is identical to the inspection above stringers S-15L and S-15R (upper lobe) and is
done using a LFEC, HFEC, and Detailed Inspection procedures from the forward and the aft side.
The compliance time for this inspection is different than the compliance time for the upper-lobe
inspection. Refer to Paragraph 1.E., Compliance for compliance information.
— Do repeat inspections at the times shown in Paragraph 1.E., Compliance.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
24 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 25

— If you find any cracking in this area, contact Boeing for repair instructions and install the repair.
Inspect the web for any cracking at the outer circumferential tear strap:
— From the aft side of the bulkhead, do a LFEC inspection for any cracking in the web at the outer
circumferential tear strap around the entire bulkhead. As an option, you can do a HFEC inspection
from the forward side of the bulkhead. Refer to Paragraph 1.E., Compliance for compliance
information.
— If you find any cracking in this area, repair in accordance with the SRM or contact Boeing for repair
instructions and install the repair.
Inspect the web for oil-cans:
— From the aft side of the bulkhead, do a Detailed Inspection for oil-cans.
— If you find oil-cans beyond SRM allowable limits, repair it as shown in the SRM.
— If you find an oil-can within SRM allowable limits, repair as shown in the SRM, OR if the oil can is
within the SRM allowable limits you can monitor the condition with repeat inspections and repair
as shown in the SRM within the time shown in Paragraph 1.E., Compliance.
— Do repeat inspections at the times shown in Paragraph 1.E., Compliance.
Inspect the web for any cracking at the dome cap at the center of the bulkhead:
— From the aft side of the bulkhead, do a NDT inspection for any cracking in the bulkhead web near
the dome cap.
— If you find any cracking in this area, repair as shown in the SRM.
— Do repeat inspections at the times shown in Paragraph 1.E., Compliance.
Inspect the forward flange of the "Z" stiffeners for any cracking at the dome cap at the center of the
bulkhead:
— From the fwd side of the bulkhead, do a NDT inspection for any cracking in the forward flange of
the "Z" stiffeners at the dome cap. Do the inspection at both fastener rows common to the dome.
— If you find any cracking in this area, contact Boeing for repair instructions and install the repair.
— Do repeat inspections at the times shown in Paragraph 1.E., Compliance.
Revision 3:
— More work is necessary on airplanes that have repairs installed in accordance with 737-100/200
SRM 53-10-4, Figures 3, 5, and 12, or 737-300/400/500 SRM 53-80-08, Repair 1, 2, and 4: Repeat
inspections must be performed at the times shown in Paragraph 1.E., Compliance.
— More work is necessary on airplanes that have repairs installed in accordance with 737-100/200
SRM 53-10-4, Figure 13 or 737-300/400/500 SRM 53-80-08, Repair 5. Repairs must be replaced
at the time shown in Paragraph 1.E., Compliance.
NOTE: Service Bulletins 737-53A1075 and 737-53-1123 have common access and can be
done concurrently with this bulletin.
1.
2. If any cracking, incorrectly drilled holes or elongated holes are found that are not
within the repairable limits of applicable repairs, write to Boeing for repair instructions.
Give the size and location of the damage. When possible, send sketches and
photographs. If the damage includes corrosion, send data on the length, width, and
largest depth of clean up.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
25 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 26

Send to: BOEING COMMERCIAL AIRPLANE GROUP ATTENTION: MANAGER, AIRLINE
SUPPORT
Revision 4 - No more work is necessary on airplanes changed in accordance with Revision 3 of this
service bulletin.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
7-1, 2-20737-100, 737-200, 737-200C
Group 1:
Affected Maintenance Zones
ZoneModel
220, 701737-300, 737-400, 737-500
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Federal Aviation Administration (FAA) Airworthiness Directive AD 99-08-23, is related to this service
bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
26 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 27

TABLE 1: INSPECTION REQUIREMENTS - NDT INSPECTION OF WEB AT "Y" CHORD IN THE UPPER
BULKHEAD FROM S-15L TO S-15R
Repeat Interval Flight Cycles (Not
to Exceed) (a)
Compliance Time
(whichever occurs lat-
er) (a)
ActionCondition
Above S-15L to S-
15R except S-5L
to S-7L and S-5R
to S-9R
S-5L to S-7L
and S-5R to S-
9R
Upper Fuselage from S-
15L to S-15R
6,000 Flight Cycles
from last LFEC In-
spection,
1,200 Flight Cy-
cles from last
LFEC Inspec-
tion,
Within 375 Flight Cycles
of the effective date of
AD 99-08-23,
OR
Eddy Current Inspection
and Detailed Inspection
for any cracking and any
incorrectly drilled or elon-
gated fastener hole(s) in
accordance with Para-
graph 3.B., Work Instruc-
tions, PART I.
25,000 Total
Flight Cycles or
more
OR
12,000 Flight Cy-
cles from last
HFEC Inspection.
OR
3,800 Flight Cy-
cles from the last
HFEC Inspec-
tion.
WIthin 1,200 flight cycles
or within 12 months after
the last inspection accom-
plished in accordance
with Paragraph (a)(2) of
AD 99-08-23, whichever
occurs first.
OR
Within 1,200 flight cycles
after the last LFEC (aft
side) inspection,
OR
Within 3,800 flight cycles
after the last HFEC (fwd
side) inspection.
--Before Further FlightHFEC Inspection and De-
tailed Inspection from the
forward side for any
cracking and any incorrect-
ly drilled or elongated fas-
tener hole(s). (b)
Any cracking or
incorrectly drilled
fastener hole or
elongated fasten-
er hole is found
---Repeat inspections at
specified intervals
No cracking or in-
correctly drilled or
elongated fasten-
er hole(s) found
--Before Further FlightRepair in accordance with
the Structural Repair
Manual
Any cracking or
any incorrectly
drilled or elongat-
ed fastener
hole(s) found at
S-5L to S-7L or at
S-5R to S-9R
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
27 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 28

TABLE 1: INSPECTION REQUIREMENTS - NDT INSPECTION OF WEB AT "Y" CHORD IN THE UPPER
BULKHEAD FROM S-15L TO S-15R
Repeat Interval Flight Cycles (Not
to Exceed) (a)
Compliance Time
(whichever occurs lat-
er) (a)
ActionCondition
Above S-15L to S-
15R except S-5L
to S-7L and S-5R
to S-9R
S-5L to S-7L
and S-5R to S-
9R
Upper Fuselage from S-
15L to S-15R
--Before Further FlightContact Boeing for repair
instructions and install the
repair.
Any cracking or
any incorrectly
drilled or elongat-
ed fastener
hole(s) found at
S-15L to S-7L, S-
15R to S-9R or
above S-5L to S-
5R
(a) If you install the SRM repair doubler at S-6L or S-6R in accordance with 737-100/200 SRM 53-10-4, Figure
15 or 737-300 SRM 53-80-08, Repair 7 or 737-400 SRM 53-80-08, Repair 7 or 737-500 SRM 53-80-08,
Repair 7, refer to the SRM for Inspection threshold and repeat Inspection intervals for the area of the web
covered by the repair doubler.
(b) Do the HFEC Inspection for any cracking in the section of web where the cracking or incorrectly drilled or
elongated fastener hole was found. It is not necessary to do the HFEC Inspection beyond the web splices
of the web section containing the cracking, incorrectly drilled fastener hole or elongated fastener hole.
Table 2: Inspection Requirements - NDT Inspection of Web at "Y" Chord in the Lower Bulkhead from S-
15L to S-15R
Repeat Interval Flight
Cycles (Not to Exceed)
Compliance TimeActionCondition
6,000 Flight Cycles from
the last LFEC Inspection
(aft side). (a)
Before 30,000 Total
Flight Cycles.
Eddy Current Inspection and De-
tailed Inspection for any cracking
and for any incorrectly drilled or
elongated fastener hole(s) or corro-
sion in accordance with Paragraph
3.B., Work Instructions, PART III.
Less than 24,000
Total Flight Cycles
OR
12,000 Flight Cycles from
the last HFEC Inspection
(forward side). (a)
6,000 Flight Cycles from
the last LFEC Inspection
(aft side). (a)
Within 6,000 Flight Cy-
cles or Two years,
whichever comes first,
from the date of Revi-
sion 3 of this service
bulletin.
Eddy Current Inspection and De-
tailed Inspection for any cracking
and for any incorrectly drilled or
elongated fastener hole(s) or corro-
sion in accordance with Paragraph
3.B., Work Instructions, PART III.
24,000 Total Flight
Cycles or more
OR
12,000 Flight Cycles from
the last HFEC Inspection
(forward side). (a)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
28 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 29

Table 2: Inspection Requirements - NDT Inspection of Web at "Y" Chord in the Lower Bulkhead from S-
15L to S-15R
Repeat Interval Flight
Cycles (Not to Exceed)
Compliance TimeActionCondition
-Before Further FlightContact Boeing for repair instructions
and install the repair.
Any cracking, any
incorrectly drilled or
elongated fastener
hole(s) or corrosion
found
(a) In many areas the access is limited and you can do an inspection from only one side: either the forward
side (HFEC) or the aft side (LFEC). In these areas, do the inspection from the side which provides access.
Table 3: Inspection Requirements - NDT Inspection under Tear Strap
Repeat Interval
Flight Cycles
(Not to Exceed)
Compliance TimeActionCondition
One-time inspec-
tion only.
Before 16,200 Total Flight
Cycles
Eddy Current Inspection for any
cracking in accordance with Paragraph
3.B., Work Instructions, PART II, Step
1.
Less than 15,000
Total Flight Cycles
One-time inspec-
tion only.
Within 1,200 Flight Cycles or
six months, whichever
comes first, after the date of
Revision 1 to this Service
Bulletin
Eddy Current Inspection for any
cracking in accordance with Paragraph
3.B., Work Instructions, PART II, Step
1.
15,000 Total Flight
Cycles or more
-Before Further FlightContact Boeing for repair instructions
and install the repair.
Any cracking found
Table 4: Inspection Requirements - Detailed Inspection for Oil-Cans
Repeat Interval
Flight Cycles
(Not to Exceed)
Compliance TimeActionOptionCondition
-Before 15,000 Total Flight
Cycles
Detailed Inspection for Oil-
Cans in accordance with
Paragraph 3.B., Work Instruc-
tions, PART II, Step 2.
-Initial Inspection
for Oil-Cans
OR
Within 1,200 Flight Cycles
after the date of Revision 1
to this Service Bulletin,
Whichever comes later.
-Before further flight.Contact Boeing for repair in-
structions and install the re-
pair.
-Any cracking is
found.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
29 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 30

Table 4: Inspection Requirements - Detailed Inspection for Oil-Cans
Repeat Interval
Flight Cycles
(Not to Exceed)
Compliance TimeActionOptionCondition
6,000Within 6,000 Flight Cycles
from prior Inspection.
Detailed Inspection for Oil-
Cans in accordance with
Paragraph 3.B., Work Instruc-
tions, PART II, Step 2.
-No Oil-Cans on
Initial Inspection
or Repeat In-
spections.
OR
Within 1,200 Flight Cycles
after the date of Revision 3
to this Service Bulletin,
Whichever comes later.
-Before further flight.Contact Boeing for repair in-
structions and install the re-
pair.
-Any cracking is
found.
1,200 (a)Before further flight.Detailed and NDT Inspection
in accordance with Paragraph
3.B., Work Instructions,
PART II, Step 2.
Option 1 (de-
fer repair)
Oil-Cans found
within limits de-
fined in SRM.
-Within 12,000 Flight Cycles
from the time when the oil
can is found.
Install the repair in accor-
dance with Paragraph 3.B.,
Work Instructions, PART II,
Step 2.
-Before Further Flight.Install the repair in accor-
dance with Paragraph 3.B.,
Work Instructions, PART II,
Step 2.
Option 2 (re-
pair immedi-
ately)
-Before further flight.Contact Boeing for repair in-
structions and install the re-
pair.
-Any cracking is
found.
-Before further flight.Install the repair in accor-
dance with Paragraph 3.B.,
Work Instructions, PART II,
Step 2.
-Oil-Cans found
outside of allow-
able limits de-
fined in SRM.
(a) Repeat inspections are terminated when the repair is installed.
Table 5: Inspection Requirements - NDT Inspection of the Dome Cap at the Center of the Bulkhead
Repeat Interval
Flight Cycles (Not
to Exceed)
Compliance TimeActionCondition
6,000Before 30,000 Total
Flight Cycles.
Eddy Current Inspection of the Dome Cap
for any cracking in accordance with Para-
graph 3.B., Work Instructions, PART IV.
Less than 24,000
Total Flight Cycles
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
30 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 31

Table 5: Inspection Requirements - NDT Inspection of the Dome Cap at the Center of the Bulkhead
Repeat Interval
Flight Cycles (Not
to Exceed)
Compliance TimeActionCondition
6,000Within 6,000 Flight
Cycles or 2 years,
whichever comes
first, after the date of
Revision 3 to this
Service Bulletin.
Eddy Current Inspection of the Dome Cap
for any cracking in accordance with Para-
graph 3.B., Work Instructions, PART IV.
24,000 Total Flight
Cycles or more
-Before Further
Flight.
Install the repair in accordance with Para-
graph 3.B., Work Instructions, PART IV.
Any cracking found
Table 6: Inspection Requirements - NDT Inspection of the Forward Flange of the "Z" Stiffeners at
the Dome Cap
Repeat Interval
Flight Cycles
(Not to Exceed)
Compliance TimeActionCondition
12,000Before 30,000 Total
Flight Cycles.
HFEC Inspection of the forward
flanges of the "Z" stiffener for any
cracking in accordance with Para-
graph 3.B., Work Instructions, PART
V.
Less than 24,000
Total Flight Cycles
12,000Within 6,000 Flight Cy-
cles or 2 years,
whichever comes first,
after the date of Revi-
sion 3 to this Service
Bulletin.
HFEC Inspection of the forward
flanges of the "Z" stiffener for any
cracking in accordance with Para-
graph 3.B., Work Instructions, PART
V.
24,000 Total Flight
Cycles or more
-Before Further Flight.Contact Boeing for repair instructions
and install the repair
Any cracking found
Table 7: Inspection Requirements - Inspection for Existing Repairs
Compliance TimeActionCondition
Within 4,500 flight cycles after the date
of Revision 3 to this Service Bulletin.
Do a detailed inspection of the bulkhead web
and stiffeners to find existing repairs on the
bulkhead in accordance with Paragraph 3.B.,
Work Instructions, Part VI.
All Airplanes
At the applicable time in accordance
with Table 8.
Do Eddy Current Inspections or repair replace-
ment as necessary, in accordance with Para-
graph 3.B., Work Instructions, PART II.
Obsolete SRM re-
pair installed.
At the applicable time in accordance
with the SRM.
Do Eddy Current Inspections in accordance with
Paragraph 3.B., Work Instructions, PART II.
Current SRM repair
installed.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
31 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 32

Table 7: Inspection Requirements - Inspection for Existing Repairs
Compliance TimeActionCondition
At the time in accordance with the FAA
approved Damage Tolerance Inspec-
tions.
Do the FAA approved Damage Tolerance Inspec-
tions.
Non SRM repair in-
stalled and the re-
pair has FAA ap-
proved Damage
Tolerance Inspec-
tions.
Within 4,500 flight cycles after the date
of Revision 3 to this Service Bulletin.
Contact Boeing for FAA approved Damage Tol-
erance Inspections.
Non SRM repair in-
stalled and the re-
pair does not have
FAA approved
Damage Tolerance
Inspections.
At the time in accordance with the FAA
approved Damage Tolerance Inspec-
tions.
Do the FAA approved Damage Tolerance Inspec-
tions.
Table 8: Requirements for Obsolete SRM Repairs
Repeat Interval
Flight Cycles
(Not to Exceed)
Compliance Time
(Whichever Occurs
Later)
ActionConditionReference
12,000 for HFEC
Inspection. 6,000
for LFEC Inspec-
tion.
Within 12,000 Flight
Cycles after the re-
pair was installed,
OR
Do a HFEC inspection of the
web at fastener locations not
common to a tear strap in
accordance with APPENDIX
A
737-300 SRM 53-80-08,
Repair 1 or 737-400
SRM 53-80-08, Repair
1 or 737-500 SRM 53-
80-08, Repair 1 in-
stalled (obsolete - older
SRM) or 737-100/200
SRM 53-10-4, Figure 3
repair installed (obso-
lete - older SRM)
APPENDIX A
- Repair For
Damage to
Web and
Strap Within 6,000 Flight
Cycles after the date
of Revision 3 to this
Service Bulletin.
OR
At the operators option, do a
LFEC inspection of the web
in accordance with AP-
PENDIX A
12,000 for HFEC
Inspection. 6,000
for LFEC Inspec-
tion.
Within 12,000 Flight
Cycles after the re-
pair was installed,
OR
Do a HFEC inspection of the
web at fastener locations
common to a tear strap in
accordance with APPENDIX
A Within 6,000 Flight
Cycles after the date
of Revision 3 to this
Service Bulletin.
OR
At the operators option, do a
LFEC inspection of the web
in accordance with AP-
PENDIX A
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
32 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 33

Table 8: Requirements for Obsolete SRM Repairs
Repeat Interval
Flight Cycles
(Not to Exceed)
Compliance Time
(Whichever Occurs
Later)
ActionConditionReference
12,000 for HFEC
Inspection. 6,000
for LFEC Inspec-
tion.
Within 12,000 Flight
Cycles after the re-
pair was installed,
OR
Do a HFEC inspection of the
web and repair plate in accor-
dance with APPENDIX B
OR
737-300 SRM 53-80-08,
Repair 1 or 737-400
SRM 53-80-08, Repair
1 or 737-500 SRM 53-
80-08, Repair 1 in-
stalled (obsolete - older
SRM) or 737-100/200
SRM 53-10-4, Figure 3
repair installed (obso-
lete - older SRM)
APPENDIX B
- Repair For
Damage to
Web
Within 6,000 Flight
Cycles after the date
of Revision 3 to this
Service Bulletin.
At the operators option, do a
LFEC inspection of the web
in accordance with AP-
PENDIX B
12,000 for HFEC
Inspection. 6,000
for LFEC Inspec-
tion.
Within 12,000 Flight
Cycles after the re-
pair was installed,
OR
Do a HFEC inspection of the
web in accordance with AP-
PENDIX C
OR
737-300 SRM 53-80-08,
Repair 2 or 737-400
SRM 53-80-08, Repair
2 or 737-500 SRM 53-
80-08, Repair 2 in-
stalled (obsolete - older
SRM) or 737-100/200
SRM 53-10-4, Figure 5
repair installed (obso-
lete - older SRM)
APPENDIX C
- Repair For
Oil Can in
Web.
Within 6,000 Flight
Cycles after the date
of Revision 3 to this
Service Bulletin.
At the operators option, do a
LFEC inspection of the web
in accordance with AP-
PENDIX C
6,000Within 12,000 Flight
Cycles after the re-
pair was installed,
Do a LFEC inspection of the
web in accordance with AP-
PENDIX D
737-300 SRM 53-80-08,
Repair 4 or 737-400
SRM 53-80-08, Repair
4 or 737-500 SRM 53-
80-08, Repair 4 in-
stalled (obsolete - older
SRM) or 737-100/200
SRM 53-10-4, Figure 12
repair installed (obso-
lete - older SRM)
APPENDIX D
- Repair For
Oil Can in
Web (Not at
Strap)
OR
Within 6,000 Flight
Cycles after the date
of Revision 3 to this
Service Bulletin.
12,000Within 12,000 Flight
Cycles after the re-
pair was installed,
Do a HFEC inspection of the
web in accordance with AP-
PENDIX D
OR
Within 6,000 Flight
Cycles after the date
of Revision 3 to this
Service Bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
33 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 34

Table 8: Requirements for Obsolete SRM Repairs
Repeat Interval
Flight Cycles
(Not to Exceed)
Compliance Time
(Whichever Occurs
Later)
ActionConditionReference
-Within 6,000 Flight
Cycles after the date
of Revision 3 to this
Service Bulletin.
Remove the existing repair
and replace in accordance
with 737-100/200 SRM 53-
10-4, Figure 3A repair, or
737-300 SRM 53-80-08, Re-
pair 11 or 737-400 SRM 53-
80-08 , Repair 11 or 737-500
SRM 53-80-08, Repair 11 as
applicable.
737-300 SRM 53-80-08,
Repair 5 or 737-400
SRM 53-80-08, Repair
5 or 737-500 SRM 53-
80-08, Repair 5 in-
stalled (obsolete - older
SRM) or 737-100/200
SRM 53-10-4, Figure 13
repair installed (obso-
lete - older SRM)
APPENDIX E
- Repair For
Oil Can in
Web and
Strap.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
The Manager of the FAA Seattle Aircraft Certification Office has approved the inspection methods,
locations, and repetitive inspection intervals as specified in Revision 4 of this service bulletin as an
alternate method of compliance to paragraphs (a)(1), (a)(2), (c), (d)(1), (d)(2), and (g) of AD 99-08-23,
Amendment 39-11132. All provisions of the AD that are not specifically referenced in the preceding
sentence remain fully applicable and must be complied with.
Operators should be aware that a number of SRM repairs which pertain to this Service Bulletin do not
have AMOC approval statements for AD 98-11-04 R1, AD 99-08-23, AD 2008-08-23, and AD 2008-09-13.
Until these SRMs are revised to include the appropriate AMOC approval statements, operators should
request approval from the Boeing Company.
When this Service Bulletin specifies contacting Boeing for repair instructions, the repair instructions
must be approved by the FAA in accordance with paragraph (e) of AD 99-08-23, paragraph (i) of AD
98-11-04 R1, paragraph (l) of AD 2008-08-23, or paragraph (l) of AD 2008-09-13, as applicable.
G. Manpower
The table below shows an estimate of the man-hours necessary to do the inspections and modifications.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
man-hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
34 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 35

— Time to adjust to the workplace
— Time to schedule the work
— Time to examine the work
— Time to cure the materials
— Time to make the parts
— Time to find the tools.
Table 1A:
Web Inspection at "Y" Chord - Option A: LFEC Inspection from the Aft Side of the Bulkhead
Elapsed Time
(Hours)
Man-HoursNumber of PersonsTask
482LFEC Inspection
48TOTAL FOR EACH AIRPLANE
Table 1B:
Web Inspection at "Y" Chord - Option B: HFEC Inspection from the Forward Side of the Bulkhead
Elapsed Time
(Hours)
Man-HoursNumber of PersonsTask
13262Access
1 (a)2 (a)2HFEC Inspect Web
16322Close Access
3060TOTAL FOR EACH AIRPLANE
(a) Adding the NDT inspection below S-15 would take an additional 24 hours.
Table 2:
Web Inspection under Outer Circumferential Tear Strap and Detailed Inspection for Oil-Cans
Elapsed HoursTask-HoursNumber of PersonsTask
7142LFEC Inspection and Detailed
Inspection (a)
4 (b)8 (b)2Optional HFEC Inspection and
Detailed Inspection (a)
714TOTAL FOR EACH AIRPLANE - LFEC OPTION
48TOTAL FOR EACH AIRPLANE - HFEC OPTION
(a) The repeat oil-can Detailed Inspections would take 1 person 0.5 hours.
(b) This estimate does not include access and close access for the forward side of the web. Refer
to Table 1B for an estimate of the man-hours needed to get access and close access for the
forward side of the bulkhead.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
35 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 36

Table 3:
NDT Inspection of Bulkhead Lap Splices at the Center of the Bulkhead
Elapsed HoursTask-HoursNumber of PersonsTask
3 (a)6 (a)2Inspection
36TOTAL FOR EACH AIRPLANE
(a) This estimate does not include access and close access for the forward side of the
web. Refer to Table 1B for an estimate of the man-hours needed to get access and
close access for the forward side of the bulkhead.
Table 4:
NDT Inspection of "Z" Stiffeners at the Dome Cap
Elapsed HoursTask-HoursNumber of PersonsTask
4 (a)8 (a)2Inspection
48TOTAL FOR EACH AIRPLANE
(a) This estimate does not include access and close access for the forward side of the
web. Refer to Table 1B for an estimate of the man-hours needed to get access and
close access for the forward side of the bulkhead.
H. Weight and Balance Changes
None
I. Electrical Load Data
Not applicable
J. References
1. Existing Data:
a. Engineering Change Memo PRR 35005-229R
b. Boeing Service Bulletin 737-53-1123, 737-53A1075
c. Boeing Service Related Problem (SRP) 737-SRP-53-0109, 737-SRP-53-0116,
737-SRP-53-0155
d. Boeing Structural Item Interim Advisory (SIIA) 737-269, 737-52
e. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2008-08-23, 2008-09-13,
98-11-04, 99-08-23
f. Service Bulletin Index D6-19567
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
36 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 37

g. 737 Non-Destructive Testing (NDT) Manual Part 6, 51-00-00, Part 6, 53-10-41, Part 6, 53-10-54,
Part 6, 53-10-64, Part 6, 53-30-00
h. 737-100/200 Aircraft Maintenance Manual (AMM) 25-31-61, 25-40-0, 38-11-11
i. 737-100/200 Structural Repair Manual (SRM) 53-10-1, 53-10-11, 53-10-4
j. 737-300/400/500 Aircraft Maintenance Manual (AMM) 25-31-41, 25-40-01, 38-11-11
k. 737-300 Structural Repair Manual (SRM) 53-80-08
l. 737-400 Structural Repair Manual (SRM) 53-80-08
m. 737-500 Structural Repair Manual (SRM) 53-80-08
2. Data supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
Bulkhead Installation - STA 101665-46568
Support Installation - Toilet Compartments
Section 46
65-46812
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS and new DTI requirements for the structure
affected are contained in Paragraph 1.E., Compliance of this service bulletin.
L. Interchangeability and Intermixability of Parts
None
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
37 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 38

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
38 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT
BLANK PAGE

### Page 39

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None
B. Industry Support Information
Boeing warranty remedies are not available for the inspection, and/or repair procedures given in this
service bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts:
None
2. Parts and Materials Supplied by the Operator:
None.
3. Parts Modified and Reidentified:
None
4. Parts Removed and Not Replaced:
None
D. Parts Necessary to Change Spares
None
E. Special Tooling - Price and Availability
None
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
39 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 40

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
40 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT
BLANK PAGE

### Page 41

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque limits to tighten nuts and bolts are in SRM Chapter 51
4. Use the approved fastener and process material substitutions in accordance with
SRM Chapter 51.
5. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51.
6. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
7. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
8. Boeing Service Letter 737-SL-51-042, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
41 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 42

9. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
B. WORK INSTRUCTIONS
PART I - NDT INSPECTION OF THE WEB AT THE "Y" CHORD - UPPER BULKHEAD FROM S-15L
TO S-15R:
1. Do a Detailed Inspection and LFEC inspection of the aft side of the bulkhead web in accordance
with Figure 1. As an option, you can do an inspection of the forward side of the bulkhead web in
accordance with PART I - Step 3 (below).
2. If you find any cracking, or incorrectly drilled fastener hole or elongated fastener hole while you
are doing the LFEC inspection and Detailed Inspection, you must get access to the forward side
of the bulkhead and do a HFEC and Detailed Inspection of the section of web where the cracking,
incorrectly drilled fastener hole or elongated fastener hole was found. Do the inspection in
accordance with FIGURE 2 except the inspection can be limited to only the section of web with
the damage. It is not necessary to do the inspection beyond the web splices of the web section
containing the damage.
3. As an option to doing the LFEC inspection from the aft side of the bulkhead, you can do an
inspection from the forward side of the bulkhead as follows:
a. Get access to the forward side of the bulkhead by removing these items as necessary:
(1) Remove the galley. Refer to 737-100/200 AMM 25-31-61 or 737-300/400/500 AMM
25-31-41 as an accepted procedure.
(2) Remove the lavatory. Refer to 737-100/200 AMM 25-40-0 or 737-300/400/500 AMM
25-40-01 as an accepted procedure.
b. Do an inspection of the forward side of the bulkhead in accordance with FIGURE 2.
4. If no cracking, incorrectly drilled fastener holes or elongated fastener holes are found, put the
airplane back to a serviceable condition by replacing the aft galley and aft lavatory. Refer to the
applicable AMM sections called out in PART I - Step 3 (above).
NOTE: You can install the repair in accordance with 737-100/200 SRM 53-10-4, Figure 15 or
737-300 SRM 53-80-08, Repair 7 or 737-400 SRM 53-80-08, Repair 7 or 737-500 SRM
53-80-08, Repair 7 as a preventive modification. If the SRM repair is installed, do
inspections at the times given in the SRM.
5. If you find any cracking, incorrectly drilled fastener holes or elongated fastener holes at S-6L or
S-6R, cut out the damage and install a repair doubler in accordance with 737-100/200 SRM 53-10-4,
Figure 15 or 737-300 SRM 53-80-08, Repair 7 or 737-400 SRM 53-80-08, Repair 7 or 737-500
SRM 53-80-08, Repair 7. If you find any cracking, incorrectly drilled fastener holes or elongated
fastener holes in the web periphery at a location other than at S-6L or S-6R, contact Boeing for
repair instructions and install the repair.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
42 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 43

NOTE: – More work is required on airplanes with any web cracking repaired in accordance
with 737-100/200 SRM 53-10-4 , Figure 3 or 737-300 SRM 53-80-08, Repair 1 or
737-400 SRM 53-80-08, Repair 1 or 737-500 SRM 53-80-08, Repair 1. If web cracking
at the "Y" Chord was repaired using one of these figures, contact Boeing within 90
days of the release date of Revision 2 of this Service Bulletin to find out what
additional work will be required. Please provide repair details when contacting Boeing.
– If you install the repair in accordance with 737-100/200 SRM 53-10-4, Figure 15 or
737-300 SRM 53-80-08, Repair 7 or 737-400 SRM 53-80-08, Repair 7 or 737-500
SRM 53-80-08, Repair 7, do inspections at the times given in the SRM.
6. If you find any cracking, report it to the Boeing company. Include the crack location, length, and
the airplane flight cycles and flight hours. Send the information to: BOEING COMMERCIAL
AIRPLANE GROUP ATTENTION: MANAGER, AIRLINE SUPPORT
7. Do repeat inspections of unrepaired structure at the times shown in Paragraph 1.E., Compliance.
NOTE: If you installed the repair in accordance with 737-100/200 SRM 53-10-4, Figure 15 or
737-300 SRM 53-80-08, Repair 7 or 737-400 SRM 53-80-08, Repair 7 or 737-500 SRM
53-80-08, Repair 7, do inspections at the times given in the SRM.
PART II - NDT INSPECTION UNDER CIRCUMFERENTIAL TEAR STRAP AND DETAILED
INSPECTION FOR OIL-CANNING:
1. ONE-TIME NDT INSPECTION UNDER THE TEAR STRAP:
a. From the aft side of the bulkhead, do a one-time LFEC inspection of the web under the outer
circumferential tear strap in accordance with FIGURE 3.
b. As an option to doing the LFEC inspection from the aft side, you can do a one-time HFEC
inspection from the forward side in accordance with FIGURE 3.
c. If you find any cracking under the outer circumferential tear strap, contact Boeing for repair
instructions and repair. Do not repair in accordance with the SRM.
2. DETAILED INSPECTION FOR OIL-CANNING:
a. At the times shown in Paragraph 1.E., Compliance, Table 4, accomplish a Detailed Inspection
for oil canning from the aft side of the Bulkhead in accordance with FIGURE 5.
b. If oil canning is found, accomplish the additional NDT inspections in accordance with the
Allowable Damage Section in 737-100/200 SRM 53-10-1, Figure 1 or 737-300 SRM 53-80-08,
Figure 101 or 737-400 SRM 53-80-08, Figure 101 or 737-500 SRM 53-80-08, Figure 101. If
any cracking is found when inspecting the oil canning, or if any of the structural requirements
listed in the SRM Notes cannot be met (for example: proximity to fasteners, damage to adjacent
structure etc.), then contact Boeing for repair instructions and install the repair.
c. Measure the depth and width of the oil can in accordance with the SRM Allowable Damage
Section. If the oil can is within the limits of Graph I (lower curve) where repairs can be deferred,
then choose one of the options that follow:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
43 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 44

(1) Option 1: Install the appropriate repair in accordance with Graph I of the SRM Allowable
Damage Section in 737-100/200 SRM 53-10-1, Figure 1, or 737-300 SRM 53-80-08,
Figure 101 or 737-400 SRM 53-80-08, Figure 101 or 737-500 SRM 53-80-08, Figure 101,
within the time shown in Paragraph 1.E., Compliance. Repeat inspections are required
until the repair is installed. Accomplish the inspection program in accordance with the
SRM Allowable Damage Section.
(2) Option 2: Install the appropriate repair in accordance with Graph I of the SRM Allowable
Damage Section, before further flight.
d. If the oil canning exceeds the limits of Graph I (lower curve) of the Allowable Damage Section
in 737-100/200 SRM 53-10-1, Figure 1 or 737-300 SRM 53-80-08, Figure 101 or 737-400
SRM 53-80-08, Figure 101 or 737-500 SRM 53-80-08, Figure 101, then install the appropriate
repair in accordance with Graph I, before further flight.
e. Note that Graph I of the SRM Allowable Damage Section refers to two repairs, dependent
upon the severity of the oil canning. These repairs are detailed below in Table 1.
Table 1: SRM Repairs for the Aft Pressure Bulkhead
737-300 SRM 53-
80-08
737-400 SRM 53-
80-08
737-500 SRM 53-
80-08
737-100/200 SRM
53-10-4
Subject
Repair 11Figure 3ABS 1016 Bulkhead Cutout Repair
Repair 12Figure 5AOil Can Doubler Repair
f. If an oil-can repair is installed as listed in Table 1 above, do inspections of the repair at the
times given in the SRM.
g. After you install the SRM oil-can repair(s), verify that remaining oil-cans (if any) are within the
allowable damage limits of the SRM.
h. If you find any oil canning, report it to the Boeing company. Report the oil canning even if you
are going to repair it in accordance with the SRM.
Include the location, depth, size, orientation, and the airplane flight cycles and flight hours.
Send the information to:
BOEING COMMERCIAL AIRPLANE GROUP ATTENTION: MANAGER, AIRLINE SUPPORT
i. Do repeat inspections for oil canning at the times shown in Paragraph 1.E., Compliance.
PART III - NDT AND DETAILED INSPECTION OF THE WEB AT THE "Y" CHORD BELOW S-15
1. Get access to the forward side of the bulkhead by removing these items as necessary:
a. Remove the galley. Refer to 737-100/200 AMM 25-31-61 or 737-300/400/500 AMM 25-31-41
as an accepted procedure.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
44 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 45

b. Remove the lavatory. Refer to 737-100/200 AMM 25-40-0 or 737-300/400/500 AMM 25-40-01.
c. Remove the potable water tank. Refer to 737-100/200 AMM 38-11-11 or 737-300/400/500
AMM 38-11-11.
2. Do an inspection of the web from the forward or aft side of the bulkhead in accordance with FIGURE
4.
NOTE: In many areas the access is limited and you can do an inspection from only one side:
either the forward side (HFEC) or the aft side (LFEC). In these areas, do the inspection
from the side which provides access.
3. If no cracking or no incorrectly drilled fastener holes or no elongated fastener holes are found, put
the airplane back to a serviceable condition by replacing the galley, lavatory, and potable water
tank, as necessary. Refer to the applicable AMM sections called out in PART III - Step 1 (above).
If any cracking, incorrectly drilled fastener holes or elongated fastener holes are found, contact
Boeing for repair instructions and install the repair. Report all cracking to the Boeing Company.
Include the crack location, the length, and the airplane flight cycles and flight hours. Send the
report to:
BOEING COMMERCIAL AIRPLANE GROUP
ATTENTION: MANAGER, AIRLINE SUPPORT
NOTE: The 737-100/200 SRM 53-10-4, Figure 15 or 737-300 SRM 53-80-08, Figure 7 or 737-400
SRM 53-80-08, Figure 7 or 737-500 SRM 53-80-08, Repair 7 repair for cracking at S-6L
and S-6R cannot be used at other stringer locations.
4. Do repeat inspections at the times shown in Paragraph 1.E., Compliance.
PART IV - NDT INSPECTION OF THE DOME CAP AT THE CENTER OF THE BULKHEAD
1. Do an inspection of the dome cap at the center of the bulkhead in accordance with FIGURE 6.
a. If any cracking in the web is found, install the appropriate SRM repair, in accordance with
Table 3, below.
Table 3: SRM Repairs for the Apex Region of the Aft Pressure Bulkhead
737-300 SRM 53-
80-08
737-400 SRM 53-
80-08
737-500 SRM 53-
80-08
737-100/200 SRM
53-10-11
Subject
Repair 9Figure 13BS 1016 Pressure Bulkhead Web Repair -
Single Gore Web
Repair 10Figure 14BS 1016 Pressure Bulkhead Web Repair - All
Gore Webs
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
45 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 46

b. Do inspections of the repair at the times given in the SRM.
2. If no cracking is found do repeat inspections at the times shown in Paragraph 1.E., Compliance.
PART V - NDT INSPECTION OF THE FORWARD FLANGE OF THE "Z" STIFFENERS AT THE
DOME CAP
1. Do an inspection for any cracking in the "Z" stiffener flanges at the dome cap in the center of the
bulkhead as in accordance with FIGURE 7.
a. If any cracking in a "Z" stiffener flange is found, contact Boeing for repair instructions and
install the repair.
2. If no cracking is found do repeat inspections at the times shown in Paragraph 1.E., Compliance.
PART VI - DETAILED INSPECTION FOR EXISTING REPAIRS ON THE BULKHEAD
1. Do a detailed inspection of the bulkhead web and stiffeners to find existing repairs on the bulkhead.
a. If no existing repair is found then no additional work is necessary.
b. If an obsolete SRM repair is found then do eddy current Inspections or repair replacement as
necessary, in accordance with Paragraph 1.E., Compliance, Table 8.
NOTE: Refer to Appendices A through E to identify Obsolete SRM repairs.
c. If a repair is installed in accordance with the SRM then Do Eddy Current Inspections in
accordance with the SRM.
d. If a non SRM repair is installed and the repair has FAA approved Damage Tolerance
Inspections do the FAA approved Damage Tolerance Inspections.
e. If a non SRM repair is installed and the repair does not have FAA approved Damage Tolerance
Inspections contact Boeing for FAA approved Damage Tolerance Inspections and do the
inspections.
2. Do an inspection of the aft pressure bulkhead to identify any SRM repairs installed that are listed
in Table 2 below.
a. If a SRM repair is installed that is listed in Table 2 below, do the inspections or repair
replacement in accordance with Appendices A through E, at the times given in Paragraph
1.E., Compliance. Refer to Table 2 below or replace the repair in accordance with Table 1
above.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
46 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 47

Table 2: Obsolete SRM Repairs for the Aft Pressure Bulkhead
Appendix737-300 SRM 53-
80-08
737-400 SRM 53-
80-08
737-500 SRM 53-
80-08
737-100/200 SRM
53-10-4
Subject
A and BRepair 1Figure 3BS 1016 Bulkhead Cutout Repair
CRepair 2Figure 5OIL CAN REPAIR
DRepair 4Figure 12OIL CAN REPAIR BETWEEN TEAR STRAPS
ERepair 5Figure 13OIL CAN REPAIR ACROSS TEAR STRAP
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4: December 16, 2011
47 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 48 (OCR)

BOEING SERVICE BULLETIN 737-53A1214
ALERT  ALERT
FIN TERMINAL
FITTINGS
ACCESS DOOR
BL
S-3L  S-3R  OUTER CIRCUMFERENTIAL
TEAR STRAP
S-7L  STEEL STRAPS  _ S-7R
(14 PLACES)
S-10L -  -S-10R
S-15L-  ~ S-15R
EDGE OF
"Y" CHORD
A-A
VIEW LOOKING FORWARD  S62128
FIGURE 1: LFEC INSPECTION OF THE WEB AT THE "Y" CHORD IN THE UPPER BULKHEAD FROM
STRINGER S-15L TO S-15R
(SHEET 1 OF 2)
Original Issue: June 17, 1999
Revision 4 December 16, 2011  BOEING PROPRIETARY -  737-53A1214
Copyright © Unpublished Work - See page 1 for details.  48 of 73

### Page 49

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAREFERENCESPROCEDURENAMETASKSTEP
From the aft side, inspect the web at
the aft fastener row of the "Y"
chord/web interface in the upper
fuselage from S-15L to S-15R. It is not
necessary to inspect the web in the
area of the steel straps.
In accordance with
737 NDT Part 6, 53-
10-54.
Low Frequency
Eddy Current
WebInspect1
Wherever you are doing the NDT in-
spection, visually inspect along both
fastener rows of the "Y" chord. Look
for any cracking and incorrectly drilled
or elongated fastener holes.
-Detailed Inspec-
tion
"Y"
chord
Inspect2
FIGURE 1: LFEC INSPECTION OF THE WEB AT THE "Y" CHORD IN THE UPPER BULKHEAD FROM
STRINGER S-15L TO S-15R
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4 December 16, 2011
49 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 50 (OCR)

BOEING SERVICE BULLETIN 737-53A1214
ALERT  ALERT
FIN TERMINAL
FITTING DOUBLER
RADIAL STIFFENER
(TYPICAL)
BL
S-3R O  • S-3L  OUTER CIRCUMFERENTIAL
ACCESS DOOR  TEAR STRAP
B
S-7R.  _S-7L
B
S-11R -  - S-11L
S-15R-  - S-15L
SPLICE ANGLE
(2 PLACES)
S-21R  \S-21L
FLOOR BEAM
LEVELING COMPOUND
A—A  S62269
VIEW LOOKING AFT
FIGURE 2: HFEC INSPECTION OF THE WEB AT THE "Y" CHORD IN THE UPPER BULKHEAD FROM
STRINGER S-15L TO S-15R
(SHEET 1 OF 2)
Original Issue: June 17, 1999
Revision 4 December 16, 2011  737-53A1214
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  50 of 73

### Page 51

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAREFERENCESPROCEDURENAMETASKSTEP
From the forward side, inspect the
web at the aft fastener row in the up-
per fuselage from S-15L to S-15R.
In accordance with
737 NDT Part 6, 51-
00-00, Figure 4 or 23.
High Frequency
Eddy Current
WebInspect1
NOTE:
1. Where a radial stiffener overlaps the "Y" chord at the perimeter of the web, you cannot
get access to the web to inspect the fastener holes. Instead, use the reference NDT pro-
cedure to inspect the web along the edge of the radial stiffener adjacent to the fastener
holes that need to be inspected. Inspect the web for a distance of one inch each side of
the fastener row.
2. Where the fin terminal fitting doublers overlap the web, use the reference NDT procedure
to inspect the web along the edge of the doublers.
Wherever you are doing the NDT in-
spection, visually inspect along both
fastener rows of the web. Look for any
cracking and any incorrectly drilled or
elongated fastener hole(s).
-Detailed Inspec-
tion
WebInspect2
FIGURE 2: HFEC INSPECTION OF THE WEB AT THE "Y" CHORD IN THE UPPER BULKHEAD FROM
STRINGER S-15L TO S-15R
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4 December 16, 2011
51 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 52 (OCR)

BOEING SERVICE BULLETIN 737-53A1214
ALERT  ALERT
BL  OD TUAR STRAPUMFERENTIAL
ACCESS DOOR
S-7L  →S-7R
S-15L -  S-15R
S-23L  S-23R
A-A
VIEW LOOKING FORWARD
FIGURE 3: ONE-TIME NDT INSPECTION OF WEB AT THE OUTER CIRCUMFERENTIAL TEAR STRAP
(SHEET 1 OF 2)
Original Issue: June 17, 1999
Revision 4 December 16, 2011  BOEING PROPRIETARY -  737-53A1214
Copyright © Unpublished Work - See page 1 for details.  52 of 73

### Page 53

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAREFERENCESPROCEDURENAMETASKSTEP
From the aft side, inspect under
the outer circumferential tear
strap for any cracking in the
web. As an option to doing this
LFEC procedure, you can do
the HFEC procedure shown in
Step 2.
In accordance with
737 NDT Part 6, 53-
10-41.
Low Frequency
Eddy Current
WebInspect (a)1
Step 2 is optional to Step 1.
From the forward side, inspect
the web at the fasteners that
attach the outer circumferential
strap.
In accordance with
737 NDT Part 6, 51-
00-00, Figure 4 or
23
High Frequency
Eddy Current
WebInspect (b)2
The NDT subject referenced in step 1 is an inspection of the web at the lap splices and at all
three tear straps. You only need to inspect the outer tear strap. For airplanes, Line no. 1 - 24,
use Reference Standard 389A.
(a)
For airplanes, Line no. 25 - 3132, use Reference Standard 389B. Contact Boeing if existing oil
can repairs or bulging of the tear strap between fasteners prevents you from doing the LFEC
inspection.
Contact Boeing if existing oil can repairs prevent you from doing the HFEC inspection.(b)
FIGURE 3: ONE-TIME NDT INSPECTION OF WEB AT THE OUTER CIRCUMFERENTIAL TEAR STRAP
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4 December 16, 2011
53 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 54 (OCR)

BOEING SERVICE BULLETIN 737-53A1214
ALERT  ALERT
ACCESS DOOR
S-15R  S-15L
SPLICE
ANGLE
S-21R  S-21L
SPLICE ANGLE  FLOOR BEAM
4) LEVELING COMPOUND
A-A
VIEW LOOKING AFT
FRAME CHORD  FRAME CHORD
WEB
WEB
"Y" CHORD  "Y" CHORD
SPLICE ANGLE
FWD C  FWD <  V09609
B-B  C-C
FIGURE 4: NDT INSPECTION OF WEB AT THE "Y" CHORD IN THE LOWER BULKHEAD FROM STRINGER
S-15LTO S-15R
(SHEET 1 OF 2)
Original Issue: June 17, 1999
Revision 4 December 16, 2011  BOEING PROPRIETARY -  737-53A1214
Copyright © Unpublished Work - See page 1 for details.  54 of 73

### Page 55

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAREFERENCESPROCEDURENAMETASKSTEP
From the forward side, do a HFEC
inspection of the web at the aft
fastener row where possible. (a)
The inspection from the forward
side is not possible at: -the "Y"
chord splice angle -the intersection
of the floor structure and the "Y"
chord -the bottom of the bulkhead
where there is leveling compound
covering the fasteners.
In accordance with
737 NDT Part 6, 51-
00-00, Fig. 4 or 23
High Frequency
Eddy Current
(HFEC)
WebInspect1
At these locations, do Step 3 and
4 instead.
The LFEC inspection in Step 3
from the aft side is optional to a
HFEC inspection from the forward
side. However, the inspection inter-
vals will be more frequent. Refer
to Paragraph 1.E., Compliance.
In accordance with
737 NDT Part 6, 53-
10-54.
Low Frequency
Eddy Current
(LFEC)
Wherever possible, visually inspect
the forward side of the bulkhead
along both fastener rows of the
web. Look for any cracking, any
incorrectly drilled or elongated
fastener hole(s), or corrosion.
-Detailed Inspec-
tion
WebInspect2
Wherever the HFEC inspection
from the forward side is not possi-
ble, do the LFEC inspection on the
aft side of the bulkhead.
In accordance with
737 NDT Part 6, 53-
10-54
Low Frequency
Eddy Current
WebInspect3
NOTE:
1. It is possible that the NDT manual shows an inspection area that is different than what
is shown in this bulletin. Use the inspection area shown in this bulletin.
2. It is not possible to inspect the web adjacent to the stringer end-fittings because the NDT
probe cannot fit under the fittings.
Inspect the web along the edge of
the leveling compound.
-Detailed Inspec-
tion
WebInspect4
(a) Where a radial stiffener overlaps the "Y" chord at the perimeter of the web, you cannot get access to
the web to inspect the fastener holes. Instead, use the reference NDT procedure to inspect the web
along the edge of the radial stiffener adjacent to the fastener holes that need to be inspected. Inspect
the web for a distance of one inch each side of the fastener row.
FIGURE 4: NDT INSPECTION OF WEB AT THE "Y" CHORD IN THE LOWER BULKHEAD FROM STRINGER
S-15LTO S-15R
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4 December 16, 2011
55 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 56 (OCR)

BOEING SERVICE BULLETIN 737-53A1214
ALERT  ALERT
BL
ACCESS DOOR
DWEB
S-7L  _S-7R
S-15L -  -S-15R
S-23L  A-A  S-23R  W55312
VIEW LOOKING FORWARD
FIGURE 5: DETAILED INSPECTION FOR OIL-CAN DAMAGE IN THE BULKHEAD WEB
(SHEET 1 OF 2)
Original Issue: June 17, 1999
Revision 4 December 16, 2011  Copyright © Unpublished Work - See page 1 for details.  BOEING PROPRIETARY -  737-53A1214  56 of 73

### Page 57

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAREFERENCESPROCEDURENAMETASKSTEP
Do a Detailed Inspection from
the aft side of the bulkhead for
any cracking. Use a flashlight
held parallel to the web surface
to highlight surface irregularity.
-Detailed Inspec-
tion
WebInspect1
FIGURE 5: DETAILED INSPECTION FOR OIL-CAN DAMAGE IN THE BULKHEAD WEB
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4 December 16, 2011
57 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 58 (OCR)

BOEING SERVICE BULLETIN 737-53A1214
ALERT  ALERT
S-1
ACCESS DOOR  I SEE Q
S-7L  →S-7R
S-15L -  S-15R
S-23L  A-A  S-23R  V58345
VIEW LOOKING FORWARD
FIGURE 6: NDT INSPECTION OF THE DOME CAP AT THE CENTER OF THE BULKHEAD
(SHEET 1 OF 2)
Original Issue: June 17, 1999
Revision 4 December 16, 2011  BOEING PROPRIETARY -  737-53A1214
Copyright © Unpublished Work - See page 1 for details.  58 of 73

### Page 59

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAREFERENCESPROCEDURENAMETASKSTEP
Inspect the web from the
aft side for any cracking.
In accordance with
737 NDT Part 6, 53-
10-64, Figure 2
Eddy CurrentWebInspect1
FIGURE 6: NDT INSPECTION OF THE DOME CAP AT THE CENTER OF THE BULKHEAD
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 17, 1999
737-53A1214Revision 4 December 16, 2011
59 of 73
BOEING SERVICE BULLETIN 737-53A1214
ALERTALERT

### Page 60 (OCR)

BOEING SERVICE BULLETIN 737-53A1214
ALERT  ALERT
RADIAL STIFFINER
(24 PLACES)
BL
S-3R g  • S-3L
ACCESS DOOR  , SEE A
S-7R.  ‚S-7L
S-11R -  - S-11L
S-15R  - S-15L
S-21R  S-21L
A—A  V58385
VIEW LOOKING AFT
FIGURE 7: NDT INSPECTION OF THE FORWARD FLANGE OF THE "Z" STIFFENER AT THE DOME CAP
(SHEET 1 OF 3)
Original Issue: June 17, 1999
Revision 4 December 16, 2011  737-53A1214
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  60 of 73

The text continues at https://openairdocs.org/service-documents/boeing/737-53a1214/file/662b65099053.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
