# Boeing Alert Service Bulletin 737-53A1254: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2010-0437; AD 2010-25-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 737-53A1254](https://openairdocs.org/service-documents/boeing/737-53a1254.md)
- Title as filed: U.S. DOT/FAA - Boeing Service Bulletin
- Pages: 147
- PDF: https://openairdocs.org/files/sha256/6e/f2/6ef21e79b869be2f7bbd65431c02642cb59dfd6e2c8bb8b20954574f725c9295
- Page: https://openairdocs.org/service-documents/boeing/737-53a1254/file/6ef21e79b869

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-53A1254
Original Issue: February 17, 2005
Revision 1: July 09, 2009
ATA System: 5311
SUBJECT: FUSELAGE - Body Frame and Overwing Stub Beam Inspection and Repair - Body
Stations 597 to 639
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2005 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P .O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
1 of 147
3.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
2 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ..................................................... 7
1. PLANNING INFORMATION ........................................ 1 1
A. Effectivity ............................................... 1 1
1. Airplanes ............................................ 1 1
2. Spares Affected ........................................ 1 9
B. Concurrent Requirements ...................................... 1 9
C. Reason ................................................ 1 9
D. Description .............................................. 2 1
E. Compliance .............................................. 2 2
F . Approval ............................................... 2 8
G. Manpower .............................................. 2 9
H. Weight and Balance Changes .................................... 3 1
I. Electrical Load Data ......................................... 3 1
J. References .............................................. 3 1
1. Existing Data: .......................................... 3 1
2. Data supplied with this Service Bulletin: ........................... 3 2
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 3 3
K. Publications Affected ......................................... 3 3
L. Interchangeability and Intermixability of Parts ........................... 3 3
2. MATERIAL INFORMATION ........................................ 3 5
A. Material - Price and Availability ................................... 3 5
B. Industry Support Information .................................... 3 6
C. Parts Necessary For Each Airplane ................................. 3 6
1. Kits/Parts: ............................................ 3 6
2. Parts and Materials Supplied by the Operator: ........................ 4 0
3. Parts Modified and Reidentified: ................................ 4 1
4. Parts Removed and Not Replaced: .............................. 4 1
D. Parts Necessary to Change Spares ................................. 4 1
E. Special Tooling - Price and Availability ............................... 4 1
F . Special Tooling Necessary to do this Service Bulletin ....................... 4 1
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 4 3
A. GENERAL INFORMATION ..................................... 4 3
B. WORK INSTRUCTIONS ....................................... 4 3
FIGURE 1: INSPECTION OF THE BS 616 AND BS 639 FRAMES FROM STRINGER S-15 TO THE LOWER
END FRAME AND THE STUB BEAM (GROUP 1 AIRPLANES) ............... 5 0
FIGURE 2: INSPECTION OF THE BS 616 AND BS 639 FRAMES FROM STRINGER S-15 TO THE LOWER
END FRAME AND THE STUB BEAM (GROUP 2 AIRPLANES) ............... 5 3
FIGURE 3: INSPECTION OF THE BS 616 AND BS 639 FRAMES FROM STRINGER S-15 TO THE LOWER
END FRAME AND THE STUB BEAM (GROUP 3 AIRPLANES) ............... 5 6
FIGURE 4: INSPECTION OF THE FRAME INNER CHORD AT BS 616 - PREVENTIVE MODIFICATION
INSTALLED ........................................... 5 9
FIGURE 5: INSPECTION OF THE FRAME INNER CHORD AT BS 616 - REPAIR INSTALLED .... 6 0
FIGURE 6: HFEC INSPECTION OF THE BS 616 AND BS 639 FRAMES FROM STRINGER S-15 TO THE
LOWER END FRAME AND THE STUB BEAM (GROUP 1 AIRPLANES) .......... 6 1
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
3 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 4

FIGURE 7: HFEC INSPECTION OF THE BS 616 AND BS 639 FRAMES FROM STRINGER S-15 TO THE
LOWER END FRAME AND THE STUB BEAM (GROUP 2 AIRPLANES) .......... 6 7
FIGURE 8: HFEC INSPECTION OF THE BS 616 AND BS 639 FRAMES FROM STRINGER S-15 TO THE
LOWER END FRAME AND THE STUB BEAM (GROUP 3 AIRPLANES) .......... 7 3
FIGURE 9: INSPECTION OF THE LOWEST TWO FASTENERS COMMON TO THE INNER CHORD AT
B S  6 0 1............................................. 7 8
FIGURE 10: INSPECTION OF THE SHEAR TIE CLIP AT BS 597 ..................... 8 0
FIGURE 11: PARTIAL FRAME REPLACEMENT OF THE BS 616 FRAMES FROM BETWEEN S-14 AND
S-15 TO THE LOWER END (GROUP 1 AIRPLANES) .................... 8 3
FIGURE 12: PARTIAL FRAME REPLACEMENT OF THE BS 616 FRAMES FROM BETWEEN S-14 AND
S-15 TO THE LOWER END (GROUP 2 AIRPLANES) .................... 8 6
FIGURE 13: PARTIAL FRAME REPLACEMENT OF THE BS 616 FRAMES FROM BETWEEN S-14 AND
S-15 TO THE LOWER END (GROUP 3 AIRPLANES) .................... 8 9
FIGURE 14: PARTIAL FRAME REPLACEMENT OF THE BS 639 FRAMES FROM BETWEEN S-14 AND
S-15 TO THE LOWER END (GROUP 1 AIRPLANES) .................... 9 2
FIGURE 15: PARTIAL FRAME REPLACEMENT OF THE BS 639 FRAMES FROM BETWEEN S-14 AND
S-15 TO THE LOWER END (GROUP 2 AIRPLANES) .................... 9 5
FIGURE 16: PARTIAL FRAME REPLACEMENT OF THE BS 639 FRAMES FROM BETWEEN S-14 AND
S-15 TO THE LOWER END (GROUP 3 AIRPLANES) .................... 9 8
FIGURE 17: PREVENTATIVE MODIFICATION OF THE FRAME INNER CHORD AT BS 601 (GROUP 3
AIRPLANES) ......................................... 1 0 1
FIGURE 18: REPAIR OF THE FRAME INNER CHORD AT BS 616 AND BS 639 (GROUP 1 AIRPLANES)
................................................. 1 0 5
FIGURE 19: REPAIR OF THE FRAME INNER CHORD AT BS 616 AND BS 639 (GROUP 2 AIRPLANES)
................................................. 1 1 2
FIGURE 20: REPAIR OF THE FRAME INNER CHORD AT BS 601, BS 616 AND BS 639 (GROUP 3
AIRPLANES) ......................................... 1 1 9
FIGURE 21: FABRICATION INSTRUCTIONS - FILLER .......................... 1 2 8
FIGURE 22: FABRICATION INSTRUCTIONS - STIFFENING ANGLE .................. 1 3 0
FIGURE 23: FABRICATION INSTRUCTIONS - TAPERED SHIM ..................... 1 3 2
FIGURE 24: BS 616 AND BS 639 FRAME POST -REPLACEMENT INSPECTION FOR SSID ITEM F-20
................................................. 1 3 4
FIGURE 25: DETAILED INSPECTION OF THE FRAME INNER CHORD AT BS 616 AND BS 639 - REPAIR
OR PREVENTIVE MODIFICATION INSTALLED ...................... 1 3 8
FIGURE 26: HFEC INSPECTION OF THE FRAME INNER CHORD AT BS 616 AND BS 639 - REPAIR OR
PREVENTIVE MODIFICATION INSTALLED......................... 1 4 2
Appendix A: INSPECTION REPORT FORM ................................ 1 4 6
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
4 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 5

Commercial 
Airplanes
737
Service Bulletin
ALERT
Revision Transmittal SheetNumber: 737-53A1254Original Issue: February 17, 2005
Revision 1: July 09, 2009
ATA System: 5311
SUBJECT: FUSELAGE - Body Frame and Overwing Stub Beam Inspection and Repair - Body
Stations 597 to 639
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
More work is necessary on airplanes inspected as given in the original issue of this service bulletin. Additional
inspections for cracks to the stub beam at BS 616 and BS 639, cracks to the frame inner chord at BS 601 and
cracks at the frame shear ties of BS 597 are necessary.
737-200C series airplanes PY056-PY057, PY409-PY410, PY422, PY463, PY591-PY595, PY671-PY672, PY721,
PY741 are removed from Group 1 of the service bulletin effectivity.
REASON FOR REVISION
This revision is sent to include a partial frame replacement of the lower frame section below S-14 at BS 616 and
BS 639, a frame inner chord repair common to the lower two fastener holes at BS 601, BS 616 and BS 639, a
preventive modification of the lower end frame inner chord at BS 601, an inspection of the stub beam at BS 616
and 639 for cracking and an inspection at BS 597 for cracking to the frame shear ties.
All 737-200C series airplanes are removed from the effectivity of this service bulletin because they have a
different frame and stub beam configuration that is not susceptible to the type of cracking defined in this service
bulletin. There have been no fleet reports of cracking at BS 597, BS 616 and BS 639 on 737-200C airplanes.
These sections were changed:
1. Summary: The BACKGROUND, ACTION, MANPOWER and MATERIAL INFORMATION sections are
updated.
2. Paragraph 1.A., Effectivity: All 737-200C series airplanes are removed from effectivity.
3. Paragraph 1.C., Reason: Reasons for additional inspections are given.
4. Paragraph 1.D., Description: Information is added for repair to BS 601, BS 616 and BS 639 and preventive
modification to BS 601. Information is also added for the shear ties inspection at BS 597, frame inner chord
inspection at BS 601, and the stub beam inspection at BS 616 and BS 639. Maintenance zone data is
added.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
5 of 147

### Page 6

5. Paragraph 1.E., Compliance: Compliance information is added for BS 616 and BS 639 partial frame splice
repairs and additional inspections at BS 597 and BS 601. Also compliance information for BS 601 preventive
modification and BS 601, BS 616 and BS 639 lower end frame inner chord repair is included.
6. Paragraph 1.G., Manpower: Manpower estimates are revised for inspections to BS 616 and BS 639 frame
inner chord, outer chord and web inspection, stub beam inspection, frame inner chord lower section repair,
and partial frame replacement. Manpower estimates are also added for BS 601 lower frame inner chord
inspection, preventive modification and repair, and BS 597 frame shear ties inspection.
7. Paragraph 1.H., Weight and Balance Changes: New weight and moment changes are added.
8. Paragraph 2.A., Material - Price and Availability: New parts are added.
9. Paragraph 2.C., Parts Necessary For Each Airplane: New parts added in Kits/Parts and Parts and Materials
Supplied by the Operator.
10. Paragraph 3.A., General Information: General Information notes are updated.
11. Paragraph 3.B., Work Instructions: Work Instructions are added for inspections to the shear tie clips at BS
597, frame inner chord lower end inspection at BS 601 and frame inner chord, outer chord, web and stub
beam inspection at BS 616 and BS 639. Instructions are also added for BS 601 frame inner chord lower
end section preventive modification and repair, BS 616 and BS 639 frame inner chord lower end section
repair and partial frame replacement.
12. Figures: New Figures 6 to 26 are added to this revision for inspections to the shear tie clips at BS 597,
lower end frame inspection, preventive modification and repair at BS 601, BS 616 and BS 639 and a lower
partial frame splice repair at BS 616 and BS 639. Instructions are also added for the inspection of the stub
beam at BS 616 and BS 639.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
The data given in Information Notice 737-53A1254 IN 01 is not included in this revision. IN 01 was sent to advise
operators that the date on the original issue of the service bulletin was not the correct issue date of the service
bulletin. Due to changes to the compliance data in Revision 1 of this service bulletin, the information in IN01 is
no longer relevant.
REVISION HISTORY
February 17, 2005Original Issue:
July 09, 2009Revision 1:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
6 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 7

Commercial 
Airplanes
737
Service Bulletin
ALERT
SummaryNumber: 737-53A1254Original Issue: February 17, 2005
Revision 1: July 09, 2009
ATA System: 5311
SUBJECT: FUSELAGE - Body Frame and Overwing Stub Beam Inspection and Repair - Body
Stations 597 to 639
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY . IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
The cause of the cracks at BS 616 and BS 639 frame sections below S-15 is due to fatigue. This fatigue failure
is due to high flight cycle stresses from both pressurization and maneuver load.
After the release of the original issue of this service bulletin, there were 25 fleet reports of frame cracking in BS
601 or BS 597 along with stub beam cracking in BS 616 and BS 639.
Service Bulletin 737-53-1182 is used to inspect for cracks emanating from the frame inner chord lower end
fastener hole located at BS 616 and BS 639. This service bulletin expands upon the inspection area shown in
service bulletin 737-53-1182 and identifies several new locations for possible cracks. The airplane effectivity for
this service bulletin includes all airplanes listed in the effectivity for service bulletin 737-53-1182 and additional
airplanes that also need to be inspected. This service bulletin supersedes service bulletin 737-53-1182.
Periodic inspections of the body frame from between the stringer S-15 and stringer S-16 to the bottom tip of the
frame, frame inner chord lower end fastener holes, frame shear ties and stub beam structure at Body Stations
616, 639 and 597 or 601 as given in this service bulletin will detect cracks at an early stage of propagation. The
accomplishment of a repair or preventive modification will reduce the possibility of undetected fatigue cracks
which could result in severed frames and induce skin cracks at these locations. This could lead to rapid
decompression of the fuselage.
Boeing Service Related Problem (SRP) 737-SRP-53-0182 is related to this service bulletin.
ACTION (PRR 35005-281RS)
The airplane effectivity is divided into 3 groups based on stub beam configuration. Group 1 is 737-200 passenger
airplanes, Group 2 is 737-300 and -500 passenger airplanes and Group 3 is 737-400 passenger airplanes.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
7 of 147

### Page 8

Remove seats, carpets, side panels and floor panels to get access to the overwing stub beams and body frames
at Body Stations 616, 639, 597 or 601.
Do a detailed inspection to detect cracks in the BS 616 and BS 639 frame web, inner chord and outer chord
from three fastener rows above S-16 to the lower end of the frames and the stub beam assembly from BL 45.5
to the outboard end. As an option to the detailed inspection, do a HFEC inspection of the BS 616 and BS 639
frame inner chord, outer chord and web from three fastener rows above S-16 down to the lower end of the
frames and the stub beam assembly for cracks. If cracking is found in the frame outside of the lowest two fastener
holes of the inner chord, do a detailed inspection of the crease beam inboard chord for cracking. If no cracking
is found on the crease beam, do a partial frame replacement of the lower frame section as detailed in this service
bulletin. If cracks are found in the inner chord common to the lowest two fastener holes and cracks are within
allowable damage, repair as detailed in this service bulletin. If cracking is found on the stub beam or in the frame
that is outside the limits of this service bulletin, contact Boeing for repair instruction.
Group 3: Do a detailed inspection of the inner chord common to the lowest two fastener holes at BS 601 for
cracks. As an option to the detailed inspection, do a HFEC inspection of the BS 601 inner chord common to the
two lowest fastener holes for cracks. If cracks are found and are within the limits defined in this service bulletin,
accomplish the repair as detailed in this service bulletin. If cracks are found outside the limit defined in this
service bulletin, contact Boeing for repair instructions and do the repair. If no cracks are found, a preventive
modification stiffening angle can be accomplished as detailed in this service bulletin or continue the inspections.
Group 1-2: At BS 597 do a detail inspection of the frame shear ties for cracks. If cracks are found, contact Boeing
for repair instructions and do the repair.
The BS 616 and BS 639 frames inner and outer chords between S-9 and S-16 are part of Structural Significant
Item (SSI) F-20. The partial frame replacement requires the installation of the needed splice angles and straps
between S-14 and S-15. The splice angles and strap hinders the SSI F-20 inspection requirements. Alternate
inspection methods are provided in this service bulletin for the locations where the repair covers the SSI area.
For airplanes where the service bulletin 737-53-1182 R1 repair or preventive modification has been installed at
BS 616 and BS 639, alternate inspections are provided.
Do the detailed or HFEC inspections at the thresholds given in the compliance section of this service bulletin.
If no cracks are found, repeat the detailed or HFEC inspections at the intervals for the appropriate method as
given in the compliance section of this service bulletin. Record the results of all crack inspections on the form
in Appendix A of this service bulletin.
EFFECTIVITY
737-200 airplanes from line number 849 through 1585 and 737-300,-400,-500 airplanes from line number 1001
through 3132.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Federal Aviation Administration (FAA) Airworthiness Directives (AD) 98-11-04 R01 and 2008-09-13 are related
to this service bulletin.
Refer to Paragraph 1.E., Compliance.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
8 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 9

INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection, repair and modification procedures given in this
service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
9 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 10 (OCR)

BOEING SERVICE BULLETIN 737-53A1254
ALERT  ALERT
ESCAPE
HATCH
BS
ANK UPPER SURFAC  FUEL  639  BS
S-16  616
BBL
BODY FRAME  45.5
SKIN  INNER CHORD
• FWD
STRINGER
CLIP  INSPECT
FOR CRACKS
S-16 -
CREASE BEAM
BODY
FRAME  INSPECT
OUTER  CHORD  208  WL  FOR CRACKS  UPPER CHORD  STUB BEAM
FRAME
> INBD
FRAME TIE  STUB BEAM
FITTING  LOWER CHORD
BBL
45.5
BBL 70.85  STUB  CENTER WING FUEL
UPPERCHORD  BEAM  TANK UPPER SURFACE
A-A
REAR VIEW OF BODY STATION 639 FOR A GROUP 1
AIRPLANE SHOWN, BODY STATION 616 SIMILAR.
Original Issue: February 17, 2005
Revision 1: July 09, 2009  737-53A1254
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  10 of 147

### Page 11

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-53A1254
Original Issue: February 17, 2005
Revision 1: July 09, 2009
ATA System: 5311
SUBJECT: FUSELAGE - Body Frame and Overwing Stub Beam Inspection and Repair - Body
Stations 597 to 639
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY . IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below.
DESCRIPTIONCONFIGURATIONGROUP
Groups are based on stub beam configuration. 737-200 passenger
airplanes from line number 849 to 1585 with BS 597, BS 616 and BS
639.
-1
Groups are based on stub beam configuration. 737-300 and 737-500
passenger airplanes from line number 1001 to 3130 with BS 597, BS
616 and BS 639.
-2
Groups are based on stub beam configuration. 737-400 from line
number 1487 to 3132 with BS 601, BS 616 and BS 639.
-3
Airplane Models:
737-200, 737-300, 737-400, 737-500
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
11 of 147

### Page 12

GroupVariable Number
1PJ119
3PJ301 - PJ302
3PJ551 - PJ561
3PJ601 - PJ615
3PJ811
3PJ816 - PJ817
1PK216 - PK220
1PK274
1PK361
1PK504
1PK515
1PK519
1PK525 - PK528
1PK560
1PK564 - PK565
1PK610
1PK617
1PK630 - PK637
1PK663 - PK666
1PK679 - PK681
1PK696 - PK697
1PK750 - PK765
1PK801 - PK804
1PK827
1PK933 - PK938
1PL023 - PL028
1PL111 - PL113
1PL172
1PL221
1PL412 - PL417
1PL455 - PL456
1PL560 - PL562
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
12 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 13

GroupVariable Number
1PL601 - PL603
1PL611
1PL621 - PL626
1PL631 - PL632
1PL746 - PL747
1PL783 - PL788
1PM003 - PM006
1PM016 - PM017
1PM051 - PM066
1PM102 - PM119
1PM141 - PM142
1PM171
1PM181
1PM251 - PM255
1PM281 - PM283
2PM381 - PM399
2PM401 - PM417
2PM541 - PM550
3PM551 - PM564
1PN001 - PN002
1PN021 - PN043
1PN081 - PN086
1PN101 - PN117
1PN131 - PN163
1PN401 - PN420
1PN431 - PN433
1PN451 - PN456
1PN471 - PN474
1PN481
1PN491 - PN493
1PN501 - PN502
1PN511 - PN512
1PN521
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
13 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 14

GroupVariable Number
2PP001 - PP054
2PP101 - PP169
2PP181 - PP199
2PP201 - PP205
2PP221
2PP231 - PP243
2PP281 - PP286
2PP301 - PP305
2PP351 - PP353
2PP376 - PP384
2PP391 - PP393
2PP401 - PP440
2PP471 - PP475
2PP501 - PP522
2PP631 - PP634
2PP651 - PP652
2PP671 - PP699
2PP701 - PP733
2PP771 - PP779
2PP801 - PP808
2PP821 - PP827
2PP831 - PP848
2PP851 - PP852
2PP861 - PP877
2PP891 - PP899
2PP901 - PP936
2PP946 - PP948
2PP951 - PP952
2PP961 - PP967
2PP981 - PP991
2PP993
2PQ001 - PQ016
2PQ026 - PQ041
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
14 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 15

GroupVariable Number
2PQ051 - PQ092
2PQ101 - PQ199
2PQ201 - PQ202
2PQ221 - PQ237
2PQ241 - PQ243
2PQ251 - PQ267
2PQ281 - PQ299
2PQ301 - PQ307
2PQ331 - PQ332
2PQ341 - PQ348
2PQ361 - PQ373
2PQ391 - PQ395
2PQ401 - PQ418
2PQ421
2PQ431 - PQ438
2PQ447 - PQ448
2PQ451
2PQ454
2PQ471 - PQ475
2PQ479 - PQ481
2PQ486 - PQ487
2PQ491 - PQ493
2PQ771 - PQ772
2PQ791 - PQ793
2PQ801 - PQ805
2PQ931 - PQ935
2PQ951
2PQ971 - PQ997
2PR001 - PR017
2PR021 - PR034
2PR041 - PR045
2PR061 - PR072
2PR077 - PR082
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
15 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 16

GroupVariable Number
2PR091 - PR092
2PR096
2PR101
2PR121 - PR122
2PR131 - PR132
2PR141 - PR143
2PR161 - PR172
2PR181
2PS601 - PS631
2PS636 - PS638
2PS641 - PS644
2PS651 - PS657
2PS666 - PS669
2PS691 - PS692
2PS701 - PS706
2PS751 - PS799
2PS811
2PS836 - PS837
2PS841 - PS846
2PS851 - PS852
2PS856
2PS861 - PS863
2PS866 - PS868
2PS871 - PS874
2PS896 - PS897
2PS901 - PS941
2PS956 - PS957
2PS961 - PS963
2PS971 - PS978
2PT001 - PT015
2PT021 - PT031
2PT041 - PT064
2PT101 - PT105
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
16 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 17

GroupVariable Number
2PT121 - PT138
2PT146 - PT148
2PT161 - PT170
2PT181 - PT188
2PT211 - PT220
2PT295
2PT301 - PT309
2PT331 - PT360
2PT381 - PT399
2PT401 - PT438
2PT501 - PT517
2PT561 - PT565
2PT581 - PT586
2PT611 - PT621
2PT641 - PT644
2PT651 - PT656
2PT671 - PT672
2PT681 - PT685
2PT701 - PT703
2PT716 - PT717
2PT721 - PT725
2PT801 - PT834
2PT851 - PT854
2PT871 - PT886
2PT901 - PT930
2PT971 - PT973
2PT981 - PT985
2PT996
2PU001 - PU025
2PU301
2PU311 - PU313
3PV001 - PV055
3PV201 - PV209
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
17 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 18

GroupVariable Number
3PV226 - PV229
3PV231 - PV237
3PV271 - PV272
3PV281 - PV287
3PV296
3PV301 - PV302
3PV351
3PV356 - PV357
3PW001 - PW054
3PW061 - PW068
3PW072
3PW086 - PW088
3PW091 - PW094
3PW101 - PW102
3PW106
3PW111 - PW120
3PW156 - PW157
3PW161 - PW171
3PW201 - PW252
3PW261 - PW268
3PW271 - PW276
3PW278
3PW281 - PW293
3PW296
3PW301 - PW327
3PW401 - PW408
3PW411 - PW418
3PW421 - PW424
3PW431 - PW435
3PW441 - PW450
3PW461 - PW467
3PW501 - PW504
3PW511 - PW522
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
18 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 19

GroupVariable Number
3PW524 - PW550
3PW556 - PW557
3PW561 - PW564
3PW571 - PW576
3PW591 - PW596
3PW611 - PW622
3PW631 - PW637
3PW661 - PW662
3PW681 - PW683
3PW701 - PW702
3PW711 - PW717
3PW741 - PW742
3PW761
3PW771
3PW831
3PW851 - PW856
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
The cause of the cracks at BS 616 and BS 639 frame sections below S-15 is due to fatigue.This fatigue
failure is due to high flight cycle stresses from both pressurization and maneuver load.
After the release of the original issue of this service bulletin, there were 25 fleet reports of frame cracking
in BS 601 or BS 597 along with stub beam cracking in BS 616 and BS 639.
Service Bulletin 737-53-1182 is used to inspect for cracks emanating from the frame inner chord lower
end fastener hole located at BS 616 and BS 639. This service bulletin expands upon the inspection
area shown in service bulletin 737-53-1182 and identifies several new locations for possible cracks.
The airplane effectivity for this service bulletin includes all airplanes listed in the effectivity for service
bulletin 737-53-1182 and additional airplanes that also need to be inspected. This service bulletin
supersedes service bulletin 737-53-1182.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
19 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 20

Periodic inspections of the body frame from between the stringer S-15 and stringer S-16 to the bottom
tip of the frame, frame inner chord lower end fastener holes, frame shear ties and stub beam structure
at Body Stations 616, 639 and 597 or 601 as given in this service bulletin will detect cracks at an early
stage of propagation. The accomplishment of a repair or preventive modification will reduce the possibility
of undetected fatigue cracks which could result in severed frames and induce skin cracks at these
locations. This could lead to rapid decompression of the fuselage.
Boeing Service Related Problem (SRP) 737-SRP-53-0182 is related to this service bulletin.
Revision 1 is sent to include a partial frame replacement of the lower frame section below S-14 for BS
616 and BS 639, a frame inner chord repair common to the lower two fastener holes at BS 601, BS
616 and BS 639, a preventive modification of the lower end frame inner chord at BS 601, an inspection
of the stub beam at BS 616 and 639 for cracking and an inspection at BS 597 for cracking to the frame
shear ties.
These sections are changed in Revision 1:
1. Summary: The BACKGROUND, ACTION, MANPOWER and MATERIAL INFORMATION sections
are updated.
2. Paragraph 1.A., Effectivity: All 737-200C series airplanes are removed from the effectivity.
3. Paragraph 1.C., Reason: Reasons for additional inspections are given.
4. Paragraph 1.D., Description: Information is added for repair to BS 601, BS 616 and BS 639 and
preventive modification to BS 601. Information is also added for the shear ties inspection at BS
597, frame inner chord inspection at BS 601, and the stub beam inspection at BS 616 and BS
639. Maintenance zone data is added.
5. Paragraph 1.E., Compliance: Compliance information is added for BS 616 and BS 639 splice
repairs and additional inspections at BS 597 and BS 601. Also compliance information for BS 601
preventive modification and BS 601, BS 616 and BS 639 lower end frame inner chord repair is
included.
6. Paragraph 1.G., Manpower: Manpower estimates are revised for inspections to BS 616 and BS
639 frame inner chord, outer chord and web inspection, stub beam inspection, frame inner chord
lower section repair, and partial frame replacement. Manpower estimates are also added for BS
601 lower frame inner chord inspection, preventive modification and repair, and BS 597 frame
shear ties inspection.
7. Paragraph 1.H., Weight and Balance Changes: New weight and moment changes are added.
8. Paragraph 2.A., Material - Price and Availability: New parts are added..
9. Paragraph 2.C., Parts Necessary For Each Airplane: New parts added in Kits/Parts and Parts and
Materials Supplied by the Operator.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
20 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 21

10. Paragraph 3.A., General Information: General Information notes are updated.
11. Paragraph 3.B., Work Instructions: Work Instructions are added for inspections to the shear tie
clips at BS 597, frame inner chord lower end inspection at BS 601 and frame inner chord, outer
chord, web and stub beam inspection at BS 616 and BS 639. Instructions are also added for BS
601 frame inner chord lower end section preventive modification and repair, BS 616 and BS 639
frame inner chord lower end section repair and partial frame replacement.
12. Figures: New Figures 6 to 26 are added to this revision for inspections to the shear tie clips at BS
597, lower end frame inspection, preventive modification and repair at BS 601, BS 616 and BS
639 and a lower splice repair at BS 616 and BS 639. Instructions are also added for the inspection
of the stub beam at BS 597, BS 601, BS 616 and BS 639.
D. Description
The airplane effectivity is divided into 3 groups based on stub beam configuration. Group 1 is 737-200
passenger airplanes, Group 2 is 737-300 and -500 passenger airplanes and Group 3 is 737-400
passenger airplanes.
Remove seats, carpets, side panels and floor panels to get access to the overwing stub beams and
body frames at Body Stations 616, 639, 597 or 601.
Do a detailed inspection to detect cracks in the BS 616 and BS 639 frame web, inner chord and outer
chord from three fastener rows above S-16 to the lower end of the frames and the stub beam assembly
from BL 45.5 to the outboard end. As an option to the detailed inspection, do a HFEC inspection of the
BS 616 and BS 639 frame inner chord, outer chord and web from three fastener rows above S-16 down
to the lower end of the frames and the stub beam assembly for cracks. If cracking is found in the frame
outside of the lowest two fastener holes of the inner chord, do a detailed inspection of the crease beam
inboard chord for cracking. If no cracking is found on the crease beam, do a partial frame replacement
of the lower frame section as detailed in this service bulletin. If cracks are found in the inner chord
common to the lowest two fastener holes and cracks are within allowable damage, repair as detailed
in this service bulletin. If cracking is found on the stub beam or in the frame that is outside the limits of
this service bulletin, contact Boeing for repair instruction.
Group 3: Do a detailed inspection of the inner chord common to the lowest two fastener holes at BS
601 for cracks. As an option to the detailed inspection, do a HFEC inspection of the BS 601 inner chord
common to the two lowest fastener holes for cracks. If cracks are found and are within the limits defined
in this service bulletin, accomplish the repair as detailed in this service bulletin. If cracks are found
outside the limit defined in this service bulletin, contact Boeing for repair instructions and do the repair.
If no cracks are found, a preventive modification stiffening angle can be accomplished as detailed in
this service bulletin or continue the inspections.
Group 1-2: At BS 597 do a detail inspection of the frame shear ties for cracks. If cracks are found,
contact Boeing for repair instructions and do the repair.
The BS 616 and BS 639 frame inner and outer chord between S-9 and S-16 are part of Structural
Significant Item (SSI) F-20.The partial frame replacement requires the installation of the needed splice
angles and straps between S-14 and S-15.The splice angles and strap hinders the SSI F-20 inspection
requirement. Alternate inspection methods are provided in this service bulletin for the locations where
the repair covers the SSI area.
For airplanes where the service bulletin 737-53-1182 R1 repair or preventive modification has been
installed at BS 616 and BS 639, alternate inspections are provided.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
21 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 22

Do the detailed or HFEC inspections at the thresholds given in the compliance section of this service
bulletin. If no cracks are found, repeat the detailed or HFEC inspections at the intervals for the
appropriate method as given in the compliance section of this service bulletin. Record the results of all
crack found that is not covered by the repair in this Service Bulletin on the form in Appendix A of this
service bulletin.
NOTE: If the damaged area is more than the specified limits, write to Boeing for repair
instructions. Give the size and location of the damage.When possible, send sketches
and photographs. If the damage includes corrosion, send data on the length, width,
and largest depth of clean up.
1.
Send to: BOEING COMMERCIAL AIRPLANES GROUP ATTENTION: MANAGER,
AIRLINE SUPPORT
Revision 1 - More work is necessary on airplanes inspected as given in the original issue of this service
bulletin. Additional inspections for cracks to the stub beam at BS 616 and BS 639, cracks to the frame
inner chord at BS 601 and cracks at the frame shear tie of BS 597 are necessary.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
1-16, 1-17737-200
Group 2:
Affected Maintenance Zones
ZoneModel
116, 117737-300, 737-500
Group 3:
Affected Maintenance Zones
ZoneModel
116A, 117A737-400
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in
Table 1 of this service bulletin mandatory.
Federal Aviation Administration (FAA) Airworthiness Directives (AD) 98-11-04 R1 and 2008-09-13 are
related to this service bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
22 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 23

Tables 1 and 2 below provide the required inspections to maintain safety of flight. Tables 3 and 4 below
provide economic inspections to find cracks prior to causing extensive damage needing a costly repair.
Table 1 - Inspection and Repair of the BS 616 and BS 639 Frames (Web, Inner and Outer Chords) and
Stub Beam. (Required minimum for safety)
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs First)
ActionCondition
4,500 flight cycles.
(a)
Before 56,500
total flight cy-
cles.
Within 3,000
flight cycles
from the date of
Revision 1 of
this service bul-
letin.
Option 1 - Do a detailed
inspection of BS 616 and
BS 639 frames (inner
chord, outer chord and
web) from three fastener
rows above S-16 down to
the lower end of the
frames and stub beam for
cracks in accordance with
Accomplishment Instruc-
tions 3.B.1.b.1
Airplanes that have not
started inspections as giv-
en in the original issue of
this service bulletin and
have accumulated between
15,000 and 55,000 total
flight cycles
9,000 flight cycles.
(a)
Before 56,500
total flight cy-
cles.
Within 3,000
flight cycles
from the date of
Revision 1 of
this service bul-
letin.
Option 2 - Do a HFEC in-
spection of the BS 616
and BS 639 frames (inner
chord, outer chord and
web) from three fastener
rows above S-16 down to
the lower end of the
frames and stub beam for
cracks in accordance with
Accomplishment Instruc-
tion 3.B.1.b.2
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
23 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 24

Table 1 - Inspection and Repair of the BS 616 and BS 639 Frames (Web, Inner and Outer Chords) and
Stub Beam. (Required minimum for safety)
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs First)
ActionCondition
4,500 flight cycles.
(a)
Within 1,500 flight cycles from the
date of Revision 1 of this service
bulletin.
Option 1 - Do a detailed
inspection of BS 616 and
BS 639 frames (inner
chord, outer chord and
web) from three fastener
rows above S-16 down to
the lower end of the
frames and stub beam for
cracks in accordance with
Accomplishment Instruc-
tions 3.B.1.b.1
Airplanes that have not
started inspections as giv-
en in the original issue of
this service bulletin and
have accumulated more
than 55,000 total flight cy-
cles
9,000 flight cycles.
(a)
Within 1,500 flight cycles from the
date of Revision 1 of this service
bulletin.
Option 2 - Do a HFEC in-
spection of the BS 616
and BS 639 frames (inner
chord, outer chord and
web) from three fastener
rows above S-16 down to
the lower end of the
frames and stub beam for
cracks in accordance with
Accomplishment Instruc-
tion 3.B.1.b.2
4,500 flight cycles.
(a)
Within 4,500
flight cycles
from the previ-
ous inspection.
Within 3,000
flight cycles
from the date of
Revision 1 of
this service bul-
letin.
Option 1 - Do a detailed
inspection of BS 616 and
BS 639 frames (inner
chord, outer chord and
web) from three fastener
rows above S-16 down to
the lower end of the
frames and stub beam for
cracks in accordance with
Accomplishment Instruc-
tions 3.B.1.b.1
Airplanes that have started
inspections given in the
original issue of this service
bulletin.
9,000 flight cycles.
(a)
Within 4,500
flight cycles
from the previ-
ous inspection.
Within 3,000
flight cycles
from the date of
Revision 1 of
this service bul-
letin.
Option 2 - Do a HFEC in-
spection of the BS 616
and BS 639 frames (inner
chord, outer chord and
web) from three fastener
rows above S-16 down to
the lower end of the
frames and stub beam for
cracks in accordance with
Accomplishment Instruc-
tion 3.B.1.b.2
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
24 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 25

Table 1 - Inspection and Repair of the BS 616 and BS 639 Frames (Web, Inner and Outer Chords) and
Stub Beam. (Required minimum for safety)
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs First)
ActionCondition
-Before further flight.Repair the cracked frame
in accordance with Ac-
complishment Instruction
3.B.4.
If any crack is found in the
frame and is not common
to the lowest two fasteners
of the inner chord.
-Before further flight.Repair the cracked frame
in accordance with Ac-
complishment Instruction
3.B.4 or 3.B.6.
If any crack is found that is
common to the lowest two
fasteners of the inner chord
only.
-Before further flight.Contact Boeing for repair
information and do the
repair.
If any crack is found in the
stub beam.
(a) Accomplishment of the repair as given in Part 4 of this service bulletin terminates the repeat inspection.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
25 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 26

Table 2 - Post Repair Inspection of BS 616 and BS 639 Frames (Web, Inner and Outer Chords). (Required
minimum for safety)
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs First)
ActionCondition
4,500 flight cy-
cles.
Within 44,000 flight cycles
after the repair has been
accomplished.
Option 1 - Do a detailed inspec-
tion of the replacement frame
section (inner chord, outer chord
and web) for cracks in accordance
with Accomplishment Instructions
3.B.1.b.1
Airplanes that have accom-
plished a partial frame
splice repair at BS 616 or
BS 639 in accordance with
Accomplishment Instruction
3.B.4 where the inner
chord and web have been
cold-worked. 9,000 flight cy-cles.Within 44,000 flight cyclesafter the repair has been
accomplished.
Option 2 - Do a HFEC inspection
of the replacement frame section
(inner chord, outer chord and
web) for cracks in accordance
with Accomplishment Instruction
3.B.1.b.2
4,500 flight cy-
cles.
Within 29,000 flight cycles
after the repair has been
accomplished.
Option 1 - Do a detailed inspec-
tion of the replacement frame
section (inner chord, outer chord
and web) for cracks in accordance
with Accomplishment Instructions
3.B.1.b.1
Airplanes that have accom-
plished a partial frame
splice repair at BS 616 or
BS 639 in accordance with
Accomplishment Instruction
3.B.4 where the inner
chord and web have not
been cold-worked. 9,000 flight cy-cles.Within 29,000 flight cyclesafter the repair has been
accomplished.
Option 2 - Do a HFEC inspection
of the replacement frame section
(inner chord, outer chord and
web) for cracks in accordance
with Accomplishment Instruction
3.B.1.b.2
-Before further flight.Contact Boeing for repair instruc-
tions.
If any crack is found
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
26 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 27

Group 3:
Table 3 - Inspection and Repair of the BS 601 Lowest Two Fasteners Common to the Inner Chord and
Stub Beam Group 3 Airplane. (Recommended economic inspection)
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs First)
ActionCondition
4,500 flight cycles.
(a)
Before 56,500
total flight cy-
cles.
Within 3,000
flight cycle from
the date of revi-
sion 1 of this
service bulletin.
Option 1 - Do a detailed
inspection of the inner
chord common to the
lowest two fasteners at
BS 601 for cracks in ac-
cordance with Accom-
plishment Instructions
3.B.2.b.1.
Airplanes that have accu-
mulated between 15,000
and 55,000 total flight cy-
cles
9,000 flight cycles.
(a)
Before 56,500
total flight cy-
cles.
Within 3,000
flight cycle from
the date of revi-
sion 1 of this
service bulletin.
Option 2 - Do a HFEC
surface inspection of the
inner chord around the
fastener head at the two
lowest fastener locations
common to the inner
chord for cracks in accor-
dance with Accomplish-
ment Instructions
3.B.2.b.2..
4,500 flight cycles.
(a)
Within 1,500 flight cycle from the
date of revision 1 of this service
bulletin.
Option 1 - Do a detailed
inspection of the inner
chord common to the
lowest two fasteners at
BS 601 for cracks in ac-
cordance with Accom-
plishment Instructions
3.B.2.b.1.
Airplanes that have accu-
mulated more than 55,000
total flight cycles
9,000 flight cycles
(a)
Within 1,500 flight cycle from the
date of revision 1 of this service
bulletin
Option 2 - Do a HFEC
surface inspection of the
inner chord around the
fastener head at the two
lowest fastener locations
common to the inner
chord for cracks in accor-
dance with Accomplish-
ment Instructions
3.B.2.b.2.
-Before further flight.Repair cracked area in
accordance with Accom-
plishment Instructions
3.B.6 (a)
If any crack is found
(a) Accomplishment of the repair or preventative modification as given in this service bulletin terminates the
repeat inspection.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
27 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 28

Group 1-2:
Table 4 - Inspection of the BS 597 Frame Ties and Stub Beam. (Recommended economic inspection)
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs First)
ActionCondition
9,000 flight cycles.Before 56,500
total flight cycles
Within 3,000
flight cycle from
the date of revi-
sion 1 of this
service bulletin.
Do a detailed inspection
of the BS 597 shear tie
common to the skin for
cracks in accordance with
Accomplishment Instruc-
tions 3.B.3.b.
Airplanes that have accu-
mulated between 15,000
and 55,000 total flight cy-
cles
9,000 flight cycles.Within 1,500 flight cycle from the
date of revision 1 of this service
bulletin.
Do a detailed inspection
of the BS 597 shear tie
common to the skin for
cracks in accordance with
Accomplishment Instruc-
tions 3.B.3.b.
Airplanes that have accu-
mulated more than 55,000
total flight cycles
-Before further flight.Contact Boeing for repair
instructions and do the
repair
If any crack is found
Table 5 - Alternate Supplemental Structural Inspection (SSI) F-20 for the area covered by the BS 616
and BS 639 Frame Splice Repair
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs First)
ActionCondition
12,000 flight cy-
cles.
-On or before
66,000 total
flight cycles.
HFEC inspect the inner and outer
chord common to the repair splice
angles and strap (inner chord on-
ly) between S-14 and S-15 at the
heel and toe along the entire
length of the repair splices in ac-
cordance with Accomplishment
Instruction 3.B.7. (a)
Airplanes that have accom-
plished a partial frame
splice repair at BS 616
and/or BS 639 in accor-
dance with Accomplish-
ment Instructions 3.B.4.
(a) This inspection replaces the SSI F-20 where a repair or modification covers the SSI area.
Accomplishment of service bulletin 737-53-1182 Revision 1 is not a concurrent requirement of this
service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA).The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
28 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 29

If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
Operators must revise their FAA-approved maintenance or inspection program to comply with paragraph
(g) of Airworthiness Directive (AD) 98-11-04 R1 when incorporating the changes specified in this service
bulletin. The inspections accomplished per Part 7 in Revision 1 of this service bulletin are approved
as a method of compliance (MOC) to paragraph (g) of AD 98-11-04 R1 for the inspection of Structurally
Significant Item F-20 of Supplemental Structural Inspection Document, D6-37089 affected by the repair
and/or modification. This MOC only applies to the areas inspected per Part 7 in Revision 1 of this
service bulletin and to those airplanes identified in Revision 1 of this service bulletin. All provisions of
AD 98-11-04 R1 that are not specifically referenced in the above statements remain fully applicable
and must be complied with.
Operators must revise their FAA-approved maintenance or inspection program to comply with paragraph
(i) of AD 2008-09-13 when incorporating the changes specified in this service bulletin. The inspections
accomplished per Part 7 in Revision 1 of this service bulletin are approved as a method of compliance
(MOC) to paragraph (g) of AD 2008-09-13 for the inspection of Structurally Significant Item F-20 of
Supplemental Structural Inspection Document, D6-82669 affected by the repair and/or modification.
This MOC only applies to the areas inspected per Part 7 in Revision 1 of this service bulletin and to
those airplanes identified in Revision 1 of this service bulletin. All provisions of AD 2008-09-13 that are
not specifically referenced in the above statements remain fully applicable and must be complied with.
G. Manpower
The table below shows an estimate of the task-hours necessary to do this service bulletin for each
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with
operator task-hour data if necessary.The estimate does not include lost time.These are some examples
of lost time:
— Time to adjust to the workplace
— Time to schedule the work
— Time to examine the work
— Time to cure the materials
— Time to make the parts
— Time to find the tools.
Table 1: BS 616 and BS 639 Lower Frame Section and Stub Beam - Inspection
Elapsed HoursTask-HoursNumber of Per-
sons
Task
5.0010.002Open Access
7.2514.502Inspect
5.0010.002Close Access
17.2534.50TOTAL FOR EACH AIRPLANE
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
29 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 30

Table 2: BS 616 and BS 639 Lower Section Splice - Repair
Elapsed HoursTask-HoursNumber of Per-
sons
Task
5.0010.002Open Access
14.0056.004Repair Lower
Frame Section
5.0010.002Close Access
24.0076.00TOTAL FOR EACH AIRPLANE
Table 3: BS 601 Lower End Frame Inner Chord - Inspection
Elapsed HoursTask-HoursNumber of Per-
sons
Task
2.505.002Open Access
0.250.251Inspect
2.505.002Close Access
5.2510.25TOTAL FOR EACH AIRPLANE
Table 4: BS 601 Lower End Frame Inner Chord - Preventive Modification
Elapsed HoursTask-HoursNumber of Per-
sons
Task
2.505.002Open Access
2.50 (a)5.00 (a)2Install Preventative
Modification
2.505.002Close Access
7.5015.00TOTAL FOR EACH AIRPLANE
(a) Estimate does not include time to manufacture part
Table 5: BS 601 and BS 616 Lower End Frame Inner Chord - Repair
Elapsed HoursTask-HoursNumber of Per-
sons
Task
5.0010.002Open Access
5.25 (a)21.00 (a)4Repair Lower End
Frame Inner Chord
5.0010.002Close Access
15.2541.00TOTAL FOR EACH AIRPLANE
(a) Estimate does not include time to manufacture part
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
30 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 31

Table 6: BS 597 Frame Shear Tie - Inspection
Elapsed HoursTask-HoursNumber of Per-
sons
Task
2.505.002Open Access
1.501.501Repair Lower
Frame Section
2.505.002Close Access
6.5011.50TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplanes
+470+0.75Partial Frame Replacement
Group 1: Figures 11 and 14
Group 2: Figures 12 and 15
Group 3: Figures 13 and 16
+150+0.25Preventive Modification
Groups 3: Figure 17
+300+0.50Frame Inner Chord Repair
Group 1: Figure 18
Group 2: Figure 19
+300+0.50Frame Inner Chord Repair
Group 3: Figure 20
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR 35005-281RS
b. Service Related Problem (SRP) 737-SRP-53-0182.
c. Federal Aviation Administration (FAA) Airworthiness Directives (AD) 98-11-04 and 2008-09-13
d. Standard Overhaul Practices Manual (SOPM) 20-41-02, 20-42-05, 20-43-03
e. 737 Non-Destructive Testing (NDT) Manual Part 6, 51-00-00
f. 737-100/200 Aircraft Maintenance Manual (AMM) 25-21-0, 25-22-0, 25-27-100, 53-21-0
g. 737-100/200 Structural Repair Manual (SRM) 53-10-03
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
31 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 32

h. 737-300/400/500 Aircraft Maintenance Manual (AMM) 25-21-01, 25-22-00, 25-27-15, 53-21-00
i. 737-300 Structural Repair Manual (SRM) 53-00-03
j. 737-400 Structural Repair Manual (SRM) 53-00-03
k. 737-500 Structural Repair Manual (SRM) 53-00-03
l. Boeing Service Bulletin 737-53-1182 Revision 1 - "Frame Inner Chord Crack Inspection,
Repair and Modification - BS616 and BS639".
2. Data supplied with this Service Bulletin:
a. Drawings:
ADCNDCN/REVSheetTitleDrawing No
--1Kit Installation - Web and Chord Repair -
Body Station 616
65C38794
--2
--3
--PSDLKit Installation - Web and Chord Repair -
Body Station 616
65C38794#DL
-AKPLKit Installation - Web and Chord Repair -
Body Station 616
65C38794-1
-AKPLKit Installation - Web and Chord Repair -
Body Station 616
65C38794-2
-AKPLKit Installation - Web and Chord Repair -
Body Station 616
65C38794-3
-AKPLKit Installation - Web and Chord Repair -
Body Station 616
65C38794-4
-AKPLKit Installation - Web and Chord Repair -
Body Station 616
65C38794-5
-AKPLKit Installation - Web and Chord Repair -
Body Station 616
65C38794-6
-A1Kit Installation - Web and Chord Repair -
Body Station 639
65C38795
-A2
-APSDLKit Installation - Web and Chord Repair -
Body Station 639
65C38795#DL
-BKPLKit Installation - Web and Chord Repair -
Body Station 639
65C38795-1
-BKPLKit Installation - Web and Chord Repair -
Body Station 639
65C38795-2
-BKPLKit Installation - Web and Chord Repair -
Body Station 639
65C38795-3
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
32 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 33

ADCNDCN/REVSheetTitleDrawing No
-BKPLKit Installation - Web and Chord Repair -
Body Station 639
65C38795-4
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
Frame Installation - Emergency Escape Hatch, Body Station 61665-46539
Frame Installation - Emergency Escape Hatch, Body Station 63965-46540
Frame Installation - Emergency Escape Hatch, Body Station 60165C32394
Frame Installation - Body Station 59765-46538
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program.This service bulletin affects FCS and new DTI requirements for the structure
affected are contained in Paragraph 1.E., Compliance of this service bulletin.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
33 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 34

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
34 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT
BLANK PAGE

### Page 35

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary for Each Airplane as shown
below. If there is a limit to the quantity (QTY) of available kits, a supply sequence is given by Spares.
More kits become available as shown in the Reorder Lead Time (ROLT). ROLT is calculated from the
date Boeing gets the purchase order.
Unit Price thru
DEC 31/09
ROLT
(Weeks)
QTYDateNameKit Number
$13,164.00771009/01/10Kit Installation - Web and
Chord Repair, Body Sta-
tion 616
65C38794-1
$16,603.00771009/01/10Kit Installation - Web and
Chord Repair, Body Sta-
tion 616
65C38794-2
$10,345.00771009/01/10Kit Installation - Web and
Chord Repair, Body Sta-
tion 616
65C38794-3
$10,139.00771009/01/10Kit Installation - Web and
Chord Repair, Body Sta-
tion 616
65C38794-4
$14,288.00772509/01/10Kit Installation - Web and
Chord Repair, Body Sta-
tion 616
65C38794-5
772509/16/10
$14,412.00772509/01/10Kit Installation - Web and
Chord Repair, Body Sta-
tion 616
65C38794-6
772509/16/10
$14,284.00562509/01/10Kit Installation - Web and
Chord Repair, Body Sta-
tion 639
65C38795-1
562509/16/10
562509/30/10
562510/14/10
56410/28/10
$14,351.00562509/01/10Kit Installation - Web and
Chord Repair, Body Sta-
tion 639
65C38795-2
562509/16/10
562509/30/10
562510/14/10
56410/28/10
$12,801.00561909/01/10Kit Installation - Web and
Chord Repair, Body Sta-
tion 639
65C38795-3
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
35 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 36

Unit Price thru
DEC 31/09
ROLT
(Weeks)
QTYDateNameKit Number
$13,182.00561909/01/10Kit Installation - Web and
Chord Repair, Body Sta-
tion 639
65C38795-4
$340.0084-AvailableKit - Fastener, Body Sta-
tion 616 and 639 Frame
Chord
65C37793-4
$213.0084-AvailableKit - Fastener, Body Sta-
tion 616 and 639 Frame
Chord
65C37793-5
$236.0084-AvailableKit - Fastener, Body Sta-
tion 616 and 639 Frame
Chord
65C37793-6
$51.0072-AvailableFastener Kit - Inner
Chord Preventive Modifi-
cation/Repair Body Sta-
tion 601
65C37793-10
The kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment.
After the Unit Price date, new price and ROLT data is applicable. Prices are in United States dollars.
Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of the methods that follow:
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
3. Mail to:
Spares Customer Support - MC 36-65
Boeing Spares Department
P .O. Box 3707
Seattle, Washington 98124-2207 USA
B. Industry Support Information
Boeing warranty remedies are not available for the inspection and/or repair procedures given in this
service bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts:
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
36 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 37

NOTE: One repair kit is needed for the BS 616 or BS 639 partial frame replacement along with
the items shown in Paragraph 2.C.2., Parts and Materials Supplied by the Operator, for
each side of the airplane. One fastener kit is needed for the BS 616 and 639 Inner Chord
repair along with the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, for each airplane. One fastener kit is needed for the BS 601 Inner Chord
repair along with the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, for each airplane.
KIT APPLICABILITY TABLE
NotesDescriptionQTYKit NumberGroup
(a)Web and Chord Repair,
Body Station 616, Left
Side.
165C38794-11
(a)Web and Chord Repair,
Body Station 616, Right
Side
165C38794-2
(a)Web and Chord Repair,
Body Station 639, Left Side
165C38795-1
(a)Web and Chord Repair,
Body Station 639, Right
Side
165C38795-2
-Fastener Kit - Inner Chord
Repair, Body Station 616
and 639
165C37793-4
(a)Web and Chord Repair,
Body Station 616, Left Side
165C38794-52
(a)Web and Chord Repair,
Body Station 616, Right
Side
165C38794-6
(a)Web and Chord Repair,
Body Station 639, Left Side
165C38795-1
(a)Web and Chord Repair,
Body Station 639, Right
Side
165C38795-2
-Fastener Kit - Inner Chord
Repair, BS 616 and BS
639
165C37793-5
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
37 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 38

KIT APPLICABILITY TABLE
NotesDescriptionQTYKit NumberGroup
(a)Web and Chord Repair,
Body Station 616, Left Side
165C38794-33
(a)Web and Chord Repair,
Body Station 616, Right
Side
165C38794-4
(a)Web and Chord Repair,
Body Station 639, Left Side
165C38795-3
(a)Web and Chord Repair,
Body Station 639, Right
Side
165C38795-4
-Fastener Kit - Inner Chord
Repair, Body Station 616
and 639
165C37793-6
-Fastener Kit - Inner Chord
Preventive Modification/Re-
pair Body Station 601
165C37793-10
(a) See kit drawing sheet KPL and PSDL for a detail list of parts contained in the kit.
Kit 65C37793
NotesExisting Part
Number
NameQTYNew Part Number
-6-5-4
KIT - FASTENER,
STA 616 AND 639
FRAME CHORD
..-65C37793-4
KIT - FASTENER,
STA 616 AND 639
FRAME CHORD
.-.65C37793-5
KIT - FASTENER,
STA 616 AND 639
FRAME CHORD
-..65C37793-6
(a) (b)BOLT, PROTRUD-
ING HD
121212BACB30FM6A6
(a) (b)BOLT44.BACB30FP10A6
(a) (b)BOLT648BACB30FP10A8
(a) (b)BOLT.46BACB30FP8A5
(a) (b)BOLT.816BACB30FP8A6
(a) (b)BOLT1812.BACB30FP8A7
(a) (b)BOLT624BACB30FP8A8
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
38 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 39

Kit 65C37793
NotesExisting Part
Number
NameQTYNew Part Number
-6-5-4
(a) (b)BOLT O/S..4BACB30MC10A6
(a) (b)BOLT.24BACB30MC8A6
(a) (b)BOLT84.BACB30MC8A7
(a) (b)BOLT.24BACB30MC8A8
(a)COLLAR..4BACC30BH10
(BACC30X10 op-
tional)
(a)COLLAR888BACC30BH8
(BACC30X8 option-
al)
(a)COLLAR1088BACC30M10
(a)COLLAR121212BACC30M6
(a)COLLAR242626BACC30M8
(a) Discard the existing part.
(b) If grip length shown is not available at Boeing, fasteners supplied in kits may be one
grip length longer than indicated. Also, if any fasteners part numbers listed are not
available or have been superseded, substitute fasteners may be supplied in kits.
Boeing Document D-590 and Boeing Drawing 65-88700 are used to determine the
part numbers used as substitutes.
Kit 65C37793
NotesExisting Part
Number
NameQTYNew Part Number
-10
--FASTENER KIT -
INNER CHORD
PREVENTIVE
MODIFICA-
TION/REPAIR,
BODY STATION
601.
-65C37793-10
(a) (b)-BOLT4BACB30MC8A7
(a) (b)-BOLT, PROTRUD-
ING HD
2BACB30MY10K6X
(a) (b)-HI-LOK PROT
HEAD
6BACB30MY6K6
(a) (b)-BOLT, PROTRUD-
ING HD
8BACB30MY8K6X
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
39 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 40

Kit 65C37793
NotesExisting Part
Number
NameQTYNew Part Number
-10
(a)-COLLAR4BACC30BH8
(a)-COLLAR2BACC30M10
(a)-COLLAR6BACC30M6
(a)-COLLAR8BACC30M8
(a) Discard the existing part.
(b) If grip length shown is not available at Boeing, fasteners supplied in kits
may be one grip length longer than indicated. Also, if any fasteners part
numbers listed are not available or have been superseded, substitute
fasteners may be supplied in kits. Boeing Document D-590 and Boeing
Drawing 65-88700 are used to determine the part numbers used as
substitutes.
2. Parts and Materials Supplied by the Operator:
NotesNameQTYPart Number / Specifica-
tion
(a) (b)Stiffening Angle2Stock 0.063 x 2.4 x 5.5 15-
5PH CRES sheet
(c)Filler2Stock 0.100 x 1.2 x 1.8
7075-T6 clad aluminum
sheet
(d)Tapered Shim2Stock 0.063 x 1.5 x 4.0
7075-T6 clad aluminum
sheet
(e)SealantAs Re-
quired
BMS 5-95, Class B - 1/2, -
2 or -4
(f)Chemical Conversion CoatingAs Re-
quired
Type 2, Class A
(e)PrimerAs Re-
quired
BMS 10-11, Type I
(e)White EnamelAs Re-
quired
BMS 10-11, Type II
(a) After forming in accordance with Figure 10, Heat treat to 150 - 170 ksi and cadmium
plate.
(b) 17-4PH CRES sheet is optional to 15-5PH CRES sheet.
(c) Only required for repairs.
(d) Shim only required when 0.01 - 0.06 inch gap can be measured between the frame web
and frame inner chord web after you remove fasteners shown in Figures 4 thru 9.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
40 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 41

NotesNameQTYPart Number / Specifica-
tion
(e) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for
supplier data.
(f) Refer to SOPM 20-43-03.
3. Parts Modified and Reidentified:
None.
4. Parts Removed and Not Replaced:
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
41 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 42

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
42 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT
BLANK PAGE

### Page 43

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. The instructions identified in Paragraph 3.B., Work Instructions and the Figure(s)
give the recommended sequence of steps. The sequence of steps to do this service
bulletin can be changed.
2. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
3. Obey all of the warnings and cautions given in the specified manual sections.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets are in 737 SRM, Chapter 51
– Torque limits to tighten nuts and bolts are in 737 SRM, Chapter 51
5. If the length of any fastener specified in this service bulletin does not meet the
installation standards in SRM Chapter 51, then a fastener of the same specification,
or an approved substitute, with a length which meets the installation standards in
SRM Chapter 51 may be used.
6. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
7. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
B. WORK INSTRUCTIONS
1. PART 1 - INSPECTION OF BS 616 and BS 639
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
43 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 44

a. Remove seats, sidewall linings, carpets and floor panels to get access to the overwing body
frame to stub beam joints at BS 616 and BS 639 left and right hand sides. Refer to 737-100/200
AMM 25-22-0, 737-100/200 AMM 25-21-0, 737-100/200 AMM 25-27-100, 737-100/200 AMM
53-21-0 and 737-300/400/500 AMM 25-22-00, 737-300/400/500 AMM 25-21-01,
737-300/400/500 AMM 25-27-15, 737-300/400/500 AMM 53-21-00 as accepted procedures.
b. Do the Option 1 or Option 2 inspections that follow. If Option 2 inspections are accomplished,
inspection intervals are increased. Refer to Paragraph 1.E., Compliance.
(1) Option 1 - Do a detailed inspection of the BS 616 and BS 639 frames and stub beam for
cracking in accordance with FIGURE 1 (Group 1 Airplanes), FIGURE 2 (Group 2 Airplanes)
and FIGURE 3 (Group 3 Airplanes). If a repair or preventive modification exists on the
inner chord below the floor which prevents the accomplishment of this inspection in that
area, do a detailed inspection of the inner chord along the length of the repair and around
the fastener head in accordance with FIGURE 25.
(a) If any crack is found in the frame and is not common to the lowest two fastener holes
of the inner chord, do a detailed inspection of the crease beam inboard chord for
cracks and do the applicable repair given in Part 4 - BS 616 and BS 639 Partial
Frame Replacement for the damaged frame.
1) If any crack is found at the crease beam inboard chord, contact Boeing for repair
instructions and do repair.
(b) If any crack is found in the frame and is common to the lowest two fastener holes of
the inner chord only, do the applicable repair given in Part 6 - BS 601 (Group 3
Airplanes), BS 616 (Groups 1, 2 and 3 Airplanes) and BS 639 (Groups 1, 2 and 3
Airplanes) Lower End Frame Inner Chord Repair for the damaged section.
(c) If any crack is found in the stub beam, contact Boeing for repair instructions.
(d) If no cracks are found, refer to paragraph 1.E - Compliance for repeat inspection
intervals.
(2) Option 2 - Do a HFEC inspection of the BS 616 and BS 639 frames and stub beam for
cracking in accordance with FIGURE 6 (Group 1 Airplanes), FIGURE 7 (Group 2 Airplanes)
and FIGURE 8 (Group 3 Airplanes). If a repair or preventive modification exists on the
inner chord below the floor which prevents the accomplishment of this inspection in that
area, do a HFEC inspection of the inner chord along the length of the repair and around
the fastener head in accordance with FIGURE 26.
(a) If any crack is found in the frame and is not common to the lowest two fastener holes
of the inner chord, do a detailed inspection of the crease beam inboard chord for
cracks and do the applicable repair given in Part 4 - BS 616 and BS 639 Partial
Frame Replacement for the damaged frame.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
44 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 45

1) If any crack is found at the crease beam inboard chord, contact Boeing for repair
instructions and do repair.
(b) If any crack is found in the frame and is common to the lowest two fastener holes of
the inner chord only, do the applicable repair given in Part 6 - BS 601 (Group 3
Airplanes), BS 616 (Groups 1, 2 and 3 Airplanes) and BS 639 (Groups 1, 2 and 3
Airplanes) Lower End Frame Inner Chord Repair for the damaged section.
(c) If any crack is found in the stub beam, contact Boeing for repair instructions.
(d) If no cracks are found, refer to paragraph 1.E - Compliance for repeat inspection
intervals.
c. Install floor panels, carpets, sidewall linings and seats previously removed for access. Refer
to 737-100/200 AMM 25-22-0, 737-100/200 AMM 25-21-0, 737-100/200 AMM 25-27-100,
737-100/200 AMM 53-21-0 and 737-300/400/500 AMM 25-22-00, 737-300/400/500 AMM
25-21-01, 737-300/400/500 AMM 25-27-15, 737-300/400/500 AMM 53-21-00 as accepted
procedures.
d. Put the airplane back to a serviceable condition.
2. Group 3:
PART 2 - INSPECTION OF BS 601
a. Remove seats, sidewall linings, carpets and floor panels to get access to the overwing body
frame to stub beam joints at BS 601 left and right hand sides. Refer to 737-300/400/500 AMM
25-22-00, 737-300/400/500 AMM 25-21-01, 737-300/400/500 AMM 25-27-15, 737-300/400/500
AMM 53-21-00 as accepted procedures.
b. Do the Option 1 or Option 2 inspections that follow. If Option 2 inspections are accomplished,
inspection intervals are increased. Refer to Paragraph 1.E., Compliance.
(1) Option 1 - Do a detailed inspection of the BS 601 frame inner chord web flange common
to the lowest two fastener holes for cracks in accordance with FIGURE 9.
(a) If any crack is found and its length would result in a trimout that is less than the
maximum allowed trimout given in FIGURE 20, do PART 6, BS 601, BS 616 and BS
639 Lower End Frame Inner Chord Repair.
(b) If any crack is found and its length would result in a trimout that exceeds the maximum
allowed trimout given in FIGURE 20, contact Boeing for repair instructions and do
the repair.
(c) If no cracks are found, refer to paragraph 1.E. - Compliance for inspection repeat
intervals or install preventive modification as follows:
1) To install a preventive modification, do PART 5, BS 601 Lower Inner Chord
Preventive Modification.
(2) Option 2 - Do a HFEC inspection of the BS 601 frame inner chord web flange common
to the lowest two fastener holes for cracks in accordance with FIGURE 9.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
45 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 46

(a) If any crack is found and its length would result in a trimout that is less than the
maximum allowed trimout given in FIGURE 20, do PART 6, BS 601, BS 616 and BS
639 Lower End Frame Inner Chord Repair.
(b) If any crack is found and its length would result in a trimout that exceeds the maximum
allowed trimout given in FIGURE 20, contact Boeing for repair instructions and do
the repair.
(c) If no cracks are found, refer to paragraph 1.E. - Compliance for inspection repeat
intervals or install preventive modification as follows:
1) To install a preventive modification, do PART 5, BS 601 Lower Inner Chord
Preventive Modification.
c. Put the airplane back to a serviceable condition.
3. Group 1-2:
PART 3 - INSPECTION OF BS 597
a. Remove seats, sidewall linings, carpets and floor panels to get access to the overwing body
frame to stub beam joints at BS 597 left and right hand sides. Refer to 737-100/200 AMM
25-22-0, 737-100/200 AMM 25-21-0, 737-100/200 AMM 25-27-100, 737-100/200 AMM 53-21-0
and 737-300/400/500 AMM 25-22-00, 737-300/400/500 AMM 25-21-01, 737-300/400/500
AMM 25-27-15, 737-300/400/500 AMM 53-21-00 as accepted procedures.
b. Do a detailed inspection of the frame shear ties common to the skin and BS 597 for cracks
in accordance with FIGURE 10.
(1) If any crack is found, contact Boeing for repair instructions.
(2) If no cracks are found, refer to paragraph 1.E. - Compliance for inspection repeat intervals.
c. Put the airplane back to a serviceable condition.
4. PART 4 - BS 616 AND BS 639 PARTIAL FRAME REPLACEMENT
a. If not already done, gain access to the overwing body frame to stub beam joint at BS 616 and
BS 639 left and right side and remove seats, carpet risers, carpets and floor panels. Refer to
737-100/200 AMM 25-22-0, 737-100/200 AMM 25-21-0, 737-100/200 AMM 25-27-100,
737-100/200 AMM 53-21-0 and 737-300/400/500 AMM 25-22-00, 737-300/400/500 AMM
25-21-01, 737-300/400/500 AMM 25-27-15, 737-300/400/500 AMM 53-21-00 as accepted
procedures.
b. Replace the lower portion of body frame inner and outer chord and web at BS 616 in
accordance with FIGURE 11 (Group 1 Airplanes) FIGURE 12 (Group 2 Airplanes) and FIGURE
13 (Group 3 Airplanes).
c. Replace the lower portion of body frame inner and outer chord and web at BS 639 in
accordance with FIGURE 14 (Group 1 Airplanes), FIGURE 15 (Group 2 Airplanes) and FIGURE
16 (Group 3 Airplanes).
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
46 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 47

d. Install the floor panels, carpets, carpet risers and seats. Refer to 737-100/200 AMM 25-22-0,
737-100/200 AMM 25-21-0, 737-100/200 AMM 25-27-100, 737-100/200 AMM 53-21-0 and
737-300/400/500 AMM 25-22-00, 737-300/400/500 AMM 25-21-01, 737-300/400/500 AMM
25-27-15, 737-300/400/500 AMM 53-21-00 as accepted procedures.
e. Put the airplane back to a serviceable condition.
f. Accomplish post repair inspections at the times specified in Table 2 of Paragraph 1.E.,
Compliance.
5. Group 3:
PART 5 - BS 601 LOWER END FRAME INNER CHORD PREVENTIVE MODIFICATION.
a. If not already done, gain access to the overwing body frame to stub beam joint at BS 601 left
and right side and remove seats, carpet risers, carpets and floor panels. Refer to
737-300/400/500 AMM 25-22-00, 737-300/400/500 AMM 25-21-01, 737-300/400/500 AMM
25-27-15, 737-300/400/500 AMM 53-21-00 as accepted procedures.
b. Carefully remove the inner chord fasteners in sequence, starting with the lowest fastener and
working up to the top fastener just below the floor and do an Open-Hole HFEC inspection of
all the open fastener holes in the frame inner chord, web and stub beam assembly for cracks
in accordance with FIGURE 17.
(1) If cracks are found in the inner chord, do BS 601 Frame Inner Chord Repair in accordance
with FIGURE 20.
(2) If cracks are found in the web or stub beam assembly, contact Boeing for repair instruction.
c. Make a stiffening angle in accordance with FIGURE 22.
d. Install the stiffening angle in accordance with FIGURE 17. If necessary, make and install a
tapered shim in accordance with FIGURE 23 to fill up any existing gap between the frame
inner chord and the frame web. The maximum allowable gap prior to fastener installation is
0.01 inches.
e. Install the floor panels, carpets, carpet risers and seats. Refer to 737-300/400/500 AMM
25-22-00, 737-300/400/500 AMM 25-21-01, 737-300/400/500 AMM 25-27-15, 737-300/400/500
AMM 53-21-00 as accepted procedures.
f. Put the airplane back to a serviceable condition.
6. PART 6 - BS 601 (Group 3 Airplanes), BS 616 (Groups 1, 2 and 3 Airplanes) and BS 639 (Groups
1, 2 and 3 Airplanes) LOWER END FRAME INNER CHORD REPAIR.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
47 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 48

a. If not already done, gain access to the overwing body frame to stub beam joint at BS 601, BS
616 and BS 639 left and right side and remove seats, carpet risers, carpets and floor panels.
Refer to 737-100/200 AMM 25-22-0, 737-100/200 AMM 25-21-0, 737-100/200 AMM 25-27-100,
737-100/200 AMM 53-21-0 and 737-300/400/500 AMM 25-22-00, 737-300/400/500 AMM
25-21-01, 737-300/400/500 AMM 25-27-15, 737-300/400/500 AMM 53-21-00 as accepted
procedures.
b. Carefully remove the inner chord fasteners in sequence starting with the lowest fastener and
working up to the top fastener just below floor at BS 616 and BS 639 in accordance with
FIGURE 18 (Group 1 Airplanes), FIGURE 19 (Group 2 Airplanes) and FIGURE 20 (Group 3
Airplanes) and at BS 601 in accordance with FIGURE 20 (Group 3 Airplanes).
c. Do an Open-Hole HFEC inspection of all open fastener holes for cracks in the frame inner
chord, web and stub beam assembly at BS 616 and BS 639 in accordance with FIGURE 18
(Group 1 Airplanes), FIGURE 19 (Group 2 Airplanes) and FIGURE 20 (Group 3 Airplanes)
and at BS 601 in accordance with FIGURE 20 (Group 3 Airplanes).
(1) If any cracks are found outside the maximum trimout noted in Figures 18, 19 or 20, contact
Boeing for repair instructions.
d. Remove the cracked area from the inner chord flange at BS 616 and BS 639 in accordance
with FIGURE 18 (Group 1 Airplanes), FIGURE 19 (Group 2 Airplanes) and FIGURE 20 (Group
3 Airplanes) and at BS 601 in accordance with FIGURE 20 (Group 3 Airplanes).
e. Make filler in accordance with FIGURE 21.
f. Make a stiffening angle in accordance with FIGURE 22.
g. Locate and install the filler and stiffening angle onto the frame chord in accordance with
FIGURE 18 (Group 1 Airplanes), FIGURE 19 (Group 2 Airplanes) and FIGURE 20 (Group 3
Airplanes). If a gap exists between the frame inner chord and the frame web, make a tapered
shim in accordance with FIGURE 23 and install tapered shim to fill up gap. Maximum allowable
gap prior to fastener installation is 0.01 inches.
h. Install the floor panels, carpets, carpet risers and seats. Refer to 737-100/200 AMM 25-22-0,
737-100/200 AMM 25-21-0, 737-100/200 AMM 25-27-100, 737-100/200 AMM 53-21-0 and
737-300/400/500 AMM 25-22-00, 737-300/400/500 AMM 25-21-01, 737-300/400/500 AMM
25-27-15, 737-300/400/500 AMM 53-21-00 as accepted procedures.
i. Put the airplane back to a serviceable condition.
j. For BS 616 or 639, continue the inspections as specified in Table 1 of Paragraph 1.E.,
Compliance. For BS 601, repair of the inner chord terminates the repeat inspection.
7. PART 7 - ALTERNATE SUPPLEMENTAL STRUCTURAL INSPECTION (SSI) F-20 FOR THE
AREA COVERED BY THE BS 616 AND 639 FRAME SPLICE REPAIR
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
48 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 49

a. If not already done, gain access to the overwing body frame to stub beam joint at BS 601, BS
616 and BS 639 left and right side and remove seats, carpet risers, carpets and floor panels.
Refer to 737-100/200 AMM 25-22-0, 737-100/200 AMM 25-21-0, 737-100/200 AMM 25-27-100,
737-100/200 AMM 53-21-0 and 737-300/400/500 AMM 25-22-00, 737-300/400/500 AMM
25-21-01, 737-300/400/500 AMM 25-27-15, 737-300/400/500 AMM 53-21-00 as accepted
procedures.
b. For airplanes that have installed an inner and outer chord splice repair, do a HFEC inspection
of the inner chord and outer chord at the heel and toe along the whole length of the splice
angles and strap (inner chord) in accordance with FIGURE 24. Refer to Paragraph 1.E.,
Compliance.
(1) If any crack is found, contact Boeing for repair instructions.
(2) If no cracks are found, refer to Paragraph 1.E., Compliance for repeat inspection intervals.
c. Install the floor panels, carpets, carpet risers and seats. Refer to 737-100/200 AMM 25-22-0,
737-100/200 AMM 25-21-0, 737-100/200 AMM 25-27-100, 737-100/200 AMM 53-21-0 and
737-300/400/500 AMM 25-22-00, 737-300/400/500 AMM 25-21-01, 737-300/400/500 AMM
25-27-15, 737-300/400/500 AMM 53-21-00 as accepted procedures.
d. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1: July 09, 2009
49 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 50

FIGURE 1: INSPECTION OF THE BS 616 AND BS 639 FRAMES FROM STRINGER S-15 TO THE LOWER
END FRAME AND THE STUB BEAM (GROUP 1 AIRPLANES)
(SHEET 1 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1 July 09, 2009
50 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 51 (OCR)

BOEING SERVICE BULLETIN 737-53A1254
ALERT  ALERT
SKIN  BODY FRAME INNER CHORD
TYPICAL CRACKS
STRINGER CLIP
2) CREASE BEAM  STUB BEAM
UPPER CHORD
S-16 -
TYPICAL
FRAME '  CRACKS  BBL
45.5
WL
BODY FRAME
208
OUTER CHORD
FRAME TIE
FITTING
STUB BEAM LOWER CHORD
STIFFENERS
BBL  STUB BEAM
70.85  → INBD  CENTER WING FUEL
UPPER CHORD  TANK UPPER SURFACE
SECTION A-A
BODY STATION 639, LEFT SIDE SHOWN, RIGHT SIDE SIMILAR
STRINGER CLIP
(1) BODY FRAME INNER CHORD
BODY FRAME
OUTER CHORD  TYPICAL CRACKS
S-16-
2) CREASE BEAM
FRAME  BBL
TYPICAL CRACKS  45.5
WL
208
FRAME TIE  • 0
FITTING
STUB BEAM 3
STIFFENERS  CENTER WING FUEL
BBL  STUB BEAM  TANK UPPER SURFACE
UPPER CHORD  70.85  SECTION B-B  LOWER CHORD  1740981
BODY STATION 616 LEFT SIDE SHOWN, RIGHT SIDE SIMILAR
FIGURE 1: INSPECTION OF THE BS 616 AND BS 639 FRAMES FROM STRINGER S-15 TO THE LOWER
END FRAME AND THE STUB BEAM (GROUP 1 AIRPLANES)
(SHEET 2 OF 3)
Original Issue: February 17, 2005
Revision 1 July 09, 2009  737-53A1254
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  51 of 147

### Page 52

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for one side of the airplane.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a)1-Frame - Web and Inner
and Outer Chords
Inspect1
(b)1-Crease Beam Inner
Chord
Inspect2
(c)1BUILT -UP ASSEMBL YStub BeamInspect3
(a) Do a detailed inspection of the frame inner chord, web and outer chord for cracks from the three fasteners
above Stringer S-16 down to the WL-208 floor level. Continue the inspection of the frames down to the
bottom tip of the frames at the stub beam joints.
(b) If cracks are found on the frame and is not common to the lowest two fastener hole of the inner chord,
do a detailed inspection of the crease beam inner chord in the area common to the BS 616 and BS 639
frames.
(c) Do a detailed inspection of the stub beam upper chord, lower chord, web and the stub beam to floor beam
attachment at BL 45.5 for cracks. Do the inspection in the area from BL 45.5 floor beam attachment out-
board to the end of the stub beam.
FIGURE 1: INSPECTION OF THE BS 616 AND BS 639 FRAMES FROM STRINGER S-15 TO THE LOWER
END FRAME AND THE STUB BEAM (GROUP 1 AIRPLANES)
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1 July 09, 2009
52 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 53

FIGURE 2: INSPECTION OF THE BS 616 AND BS 639 FRAMES FROM STRINGER S-15 TO THE LOWER
END FRAME AND THE STUB BEAM (GROUP 2 AIRPLANES)
(SHEET 1 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1 July 09, 2009
53 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 54 (OCR)

BOEING SERVICE BULLETIN 737-53A1254
ALERT  ALERT
SKIN  BODY FRAME INNER CHORD
STRINGER CLIP  TYPICAL CRACKS
CREASE  STUB BEAM
BEAM  UPPER CHORD
S-16 -
FRAME  TYPICAL  BBL
CRACKS  45.5
WL
BODY FRAME  208
OUTER CHORD
FRAME TIE
FITTING
• STUB BEAM LOWER CHORD
STIFFENERS
BBL  STUB BEAM
70.85  > INBD  CENTER WING FUEL
UPPER CHORD  TANK UPPER SURFACE
SECTION A-A
BODY STATION 639, LEFT SIDE SHOWN, RIGHT SIDE SIMILAR
1) BODY FRAME INNER CHORD
SKIN
STRINGER
CLIP
S-16  TYPICAL CRACKS
2) CREASE BEAM
BODY FRAME
OUTER CHORD  TYPICAL CRACKS
208
FRAME (1
FRAME TIE
FITTING
BBL
UPPERCHORD  BBL 70.85  > INBD  STUB BEAM  45.5  1740983
SECTION B-B
BODY STATION 616, LEFT SIDE SHOWN, RIGHT SIDE SIMILAR
FIGURE 2: INSPECTION OFTHE BS 616 AND BS 639 FRAMES FROM STRINGER S-15 TO THE LOWER
END FRAME AND THE STUB BEAM (GROUP 2 AIRPLANES)
(SHEET 2 OF 3)
Original Issue: February 17, 2005
Revision 1 July 09, 2009  BOEING PROPRIETARY -  737-53A1254
Copyright © Unpublished Work - See page 1 for details.  54 of 147

### Page 55

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for one side of the airplane.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a)1-Frame - Web and Inner
and Outer Chords
Inspect1
(b)1-Crease Beam Inner
Chord
Inspect2
(c)1BUILT -UP ASSEMBL YStub BeamInspect3
(d)1INTEGRAL MACHINED
ASSEMBL Y
Stub BeamInspect4
(a) Do a detailed inspection of the frame inner chord, web and outer chord for cracks from the three fasteners
above Stringer S-16 down to the WL-208 floor level. Continue the inspection of the frames down to the
bottom tip of the frames at the stub beam joints.
(b) If cracks are found on the frame and is not common to the lowest two fastener hole of the inner chord,
do a detailed inspection of the crease beam inner chord in the area common to the BS 616 and BS 639
frames.
(c) Do a detailed inspection of the stub beam upper chord, lower chord, web and the stub beam to floor beam
attachment at BL 45.5 for cracks. Do the inspection in the area from BL 45.5 floor beam attachment out-
board to the end of the stub beam.
(d) Do a detailed inspection of the stub beam at the area common to the frame inner chord, frame web and
frame outer chord.
FIGURE 2: INSPECTION OF THE BS 616 AND BS 639 FRAMES FROM STRINGER S-15 TO THE LOWER
END FRAME AND THE STUB BEAM (GROUP 2 AIRPLANES)
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1 July 09, 2009
55 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 56

FIGURE 3: INSPECTION OF THE BS 616 AND BS 639 FRAMES FROM STRINGER S-15 TO THE LOWER
END FRAME AND THE STUB BEAM (GROUP 3 AIRPLANES)
(SHEET 1 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1 July 09, 2009
56 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 57 (OCR)

BOEING SERVICE BULLETIN 737-53A1254
ALERT  ALERT
BODY FRAME
INNER CHORD
STRINGER CLIP
S-16 -  TYPICAL CRACKS
CREASE BEAM
BODY FRAME
OUTER CHORD  TYPICAL CRACKS
WL
208
FRAME
FRAME TIE
FITTING
3) STUB BEAM  BBL
BBL 70.85  → INBD  45.5
UPPERCHORD
SECTION A-A
BODY STATION 639, LEFT SIDE SHOWN, RIGHT SIDE SIMILAR
SKIN
1 BODY FRAME INNER CHORD
STRINGER CLIP
S-16  TYPICAL CRACKS
BODY FRAME  2) CREASE BEAM
OUTER CHORD
TYPICAL CRACKS
WL
208
FRAME 1
FRAME TIE
FITTING
3 STUB BEAM  BBL
BBL 70.85  — INBD  45.5
UPPERCHORD  SECTION B-B  1740985
BODY STATION 616, LEFT SIDE SHOWN, RIGHT SIDE SIMILAR
FIGURE 3: INSPECTION OF THE BS 616 AND BS 639 FRAMES FROM STRINGER S-15 TO THE LOWER
END FRAME AND THE STUB BEAM (GROUP 3 AIRPLANES)
(SHEET 2 OF 3)
Original Issue: February 17, 2005
Revision 1 July 09, 2009  737-53A1254
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  57 of 147

### Page 58

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for one side of the airplane.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a)1-Frame - Web and Inner
and Outer Chords
Inspect1
(b)1-Crease Beam Inner
Chord
Inspect2
(c)1INTEGRAL MACHINED
ASSEMBL Y
Stub BeamInspect3
(a) Do a detailed inspection of the frame inner chord, web and outer chord for cracks from the three fasteners
above Stringer S-16 down to the WL-208 floor level. Continue the inspection of the frames down to the
bottom tip of the frames at the stub beam joints.
(b) If cracks are found on the frame and is not common to the lowest two fastener hole of the inner chord,
do a detailed inspection of the crease beam inner chord in the area common to the BS 616 and BS 639
frames.
(c) Do a detailed inspection of the stub beam at the area common to the frame inner chord, frame web and
frame outer chord.
FIGURE 3: INSPECTION OF THE BS 616 AND BS 639 FRAMES FROM STRINGER S-15 TO THE LOWER
END FRAME AND THE STUB BEAM (GROUP 3 AIRPLANES)
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: February 17, 2005
737-53A1254Revision 1 July 09, 2009
58 of 147
BOEING SERVICE BULLETIN 737-53A1254
ALERTALERT

### Page 59 (OCR)

BOEING SERVICE BULLETIN 737-53A1254
ALERT  ALERT
THIS FIGURE IS DELETED.
D38438
FIGURE 4: INSPECTION OF THE FRAME INNER CHORD AT BS 616 - PREVENTIVE MODIFICATION
INSTALLED
(SHEET 1 OF 1)
Revision 1 July 09, 2009  . 200.
BOEING PROPRIETARY -  737-53A1254
Copyright © Unpublished Work - See page 1 for details.  59 of 147

### Page 60 (OCR)

BOEING SERVICE BULLETIN 737-53A1254
ALERT  ALERT
THIS FIGURE IS DELETED.
D38438
FIGURE 5: INSPECTION OF THE FRAME INNER CHORD AT BS 616 - REPAIR INSTALLED
(SHEET 1 OF 1)
Original Issue: February 17, 2005
Revision 1 July 09, 2009  BOEING PROPRIETARY -  737-53A1254
Copyright © Unpublished Work - See page 1 for details.  60 of 147

The text continues at https://openairdocs.org/service-documents/boeing/737-53a1254/file/6ef21e79b869.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
