# Boeing Alert Service Bulletin 737-53A1267: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-9188; AD 2017-12-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 737-53A1267](https://openairdocs.org/service-documents/boeing/737-53a1267.md)
- Title as filed: SB 737-53A1267_Rev_01 S
- Pages: 102
- PDF: https://openairdocs.org/files/sha256/85/78/857859d86e93305b791e2e75e25f4fb26cc4e47d6eae5c158c9f4d527c974638
- Page: https://openairdocs.org/service-documents/boeing/737-53a1267/file/857859d86e93

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-53A1267
Original Issue: November 28, 2006
Revision 1: March 08, 2016
ATA System: 5331 5311
SUBJECT: FUSELAGE - Skin - STA 259.5 Circumferential Butt Splice - Inspection and Repair
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2006 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
1 of 102
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
2 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
S u m m a r y  ...................................................... 9
1. PLANNING INFORMATION ........................................ 1 3
A . E f f e c t i v i t y  ............................................... 1 3
1. Airplanes ............................................ 1 3
2 . S p a r e s  A f f e c t e d  ........................................ 2 3
B. Concurrent Requirements ...................................... 2 3
C. Reason ................................................ 2 4
D. Description .............................................. 2 4
E. Compliance .............................................. 2 5
F . A p p r o v a l  ............................................... 3 4
G. Manpower .............................................. 3 5
H. Weight and Balance Changes .................................... 3 6
I. Electrical Load Data ......................................... 3 6
J . R e f e r e n c e s  .............................................. 3 6
1. Existing Data: ......................................... 3 6
2. Data Supplied with this Service Bulletin: ........................... 3 7
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 3 7
K. Publications Affected ........................................ 3 8
L. Interchangeability and Intermixability of Parts ........................... 3 8
M. Software Accomplishment Summary ................................ 3 8
2. MATERIAL INFORMATION ........................................ 3 9
A. Material - Price and Availability ................................... 3 9
B. Industry Support Information .................................... 3 9
C. Parts Necessary for Each Airplane ................................. 3 9
1 . K i t s / P a r t s  ............................................ 3 9
2. Parts and Materials Supplied by the Operator ........................ 3 9
3. Parts Modified and Reidentified ................................ 3 9
4. Parts Removed and Not Replaced .............................. 3 9
D. Parts Necessary to Change Spares ................................. 3 9
E. Special Tooling - Price and Availability ............................... 3 9
F. Special Tooling Necessary to do this Service Bulletin ....................... 4 0
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 4 1
A. GENERAL INFORMATION ..................................... 4 1
B. WORK INSTRUCTIONS ....................................... 4 3
FIGURE 1: LEFT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT
FASTENER COLUMNS - EXTERNAL SKIN INSPECTION  [Group 1, Configuration 1] . . 49
FIGURE 2: RIGHT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT
FASTENER COLUMNS - EXTERNAL SKIN INSPECTION  [Group 1, Configuration 1] . . 54
F I G U R E  3 : T H I S  F I G U R E  I S  D E L E T E D . .................................. 5 8
F I G U R E  4 : T H I S  F I G U R E  I S  D E L E T E D . .................................. 5 9
F I G U R E  5 : T H I S  F I G U R E  I S  D E L E T E D . .................................. 6 0
F I G U R E  6 : T H I S  F I G U R E  I S  D E L E T E D . .................................. 6 1
FIGURE 7: LEFT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT
FASTENER COLUMNS - EXTERNAL COUNTERSUNK RIVET INSPECTIONS  [Group 1] . 62
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
3 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 4

FIGURE 8: RIGHT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT
FASTENER COLUMNS - EXTERNAL COUNTERSUNK RIVET INSPECTIONS  [Group 1] . 67
FIGURE 9: LEFT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD FASTENER
COLUMN - EXTERNAL POST PREVENTIVE MODIFICATION SKIN INSPECTION  [Group 1,
Configuration 2] ......................................... 7 1
FIGURE 10: LEFT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - AFT FASTENER
COLUMN - EXTERNAL SKIN INSPECTION  [Group 1, Configuration 2] .......... 7 6
FIGURE 11: RIGHT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD FASTENER
COLUMN - EXTERNAL POST PREVENTIVE MODIFICATION SKIN INSPECTION  [Group 1,
Configuration 2] ......................................... 8 1
FIGURE 12: RIGHT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - AFT FASTENER
COLUMN - EXTERNAL SKIN INSPECTION  [Group 1, Configuration 2] .......... 8 5
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 1: EXTERNAL SKIN
INSPECTION - LEFT SIDE - STA 259.5 CIRCUMFERENTIAL BUTT SPLICE [Group 1,
Configuration 1] ......................................... 8 9
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 2: EXTERNAL SKIN
INSPECTION - RIGHT SIDE - STA 259.5 CIRCUMFERENTIAL BUTT SPLICE [Group 1,
Configuration 1] ......................................... 9 1
APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 3: EXTERNAL
COUNTERSINK RIVET INSPECTION - LEFT AND RIGHT SIDE - STA 259.5
CIRCUMFERENTIAL BUTT SPLICE [Group 1] ........................ 9 3
APPENDIX D: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 4: EXTERNAL POST
PREVENTIVE MODIFICATION INSPECTIONS - SKIN - LEFT SIDE - STA 259.5
CIRCUMFERENTIAL BUTT SPLICE - FORWARD FASTENER COLUMN [Group 1, Configuration
2 ]  ................................................ 9 5
APPENDIX E: L OGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 5: EXTERNAL INSPECTIONS
- SKIN - LEFT SIDE - STA 259.5 CIRCUMFERENTIAL BUTT SPLICE - AFT FASTENER
COLUMN [Group 1, Configuration 2] ............................. 9 7
APPENDIX F: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 6: EXTERNAL POST
PREVENTIVE MODIFICATION INSPECTIONS - SKIN - RIGHT SIDE - STA 259.5
CIRCUMFERENTIAL BUTT SPLICE - FORWARD FASTENER COLUMN [Group 1, Configuration
2 ]  ................................................ 9 9
APPENDIX G: L OGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 7: EXTERNAL INSPECTIONS
- SKIN - RIGHT SIDE - STA 259.5 CIRCUMFERENTIAL BUTT SPLICE - AFT FASTENER
COLUMN [Group 1, Configuration 2] ............................. 1 0 1
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
4 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 5

Commercial 
Airplanes
737
Service Bulletin
ALERT
Revision Transmittal SheetNumber: 737-53A1267Original Issue: November 28, 2006
Revision 1: March 08, 2016
ATA System: 5331 5311
SUBJECT: FUSELAGE - Skin - STA 259.5 Circumferential Butt Splice - Inspection and Repair
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Federal Aviation Administration (FAA) Airworthiness Directive AD 2007-26-04 is related to this service bulletin.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to
this service bulletin (SB). The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Effects of this Revision on airplanes on which Original Issue was previously done:
ActionConditionGroup
Do a detailed inspection and a High
Frequency Eddy Current (HFEC)
inspection of the fuselage skin, on
the left and right sides of the air-
plane, for any crack common to the
two fastener columns forward of
STA 259.5 between S-19 and S-24.
Areas of the STA 259.5 circumferen-
tial butt splice that have not had the
preventive modification installed in
accordance with SB 737-53-1267
Original Issue or SB 737-53-1076
Revision 1, Revision 2, Revision 3
or Revision 4. (a)
Group 1, Configuration 1
Do a one-time external detailed in-
spection for any crack or deformed
countersunk rivet heads on the two
fastener columns forward of STA
259.5 between S-19 and S-24, on
both left and right sides of the air-
plane.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
5 of 102

### Page 6

ActionConditionGroup
Do post preventive modification de-
tailed and High Frequency Eddy
Current (HFEC) inspections for any
crack in the fuselage skin of the for-
ward skin panel, on both left and
right sides of the airplane on the
forward fastener column forward of
STA 259.5 between S-19 and S-24.
Areas of the STA 259.5 circumferen-
tial butt splice that have had the
preventive modification installed in
accordance with SB 737-53-1267
Original Issue or SB 737-53-1076
Revision 1, Revision 2, Revision 3
or Revision 4. (a)
Group 1, Configuration 2
Do a detailed inspection and a High
Frequency Eddy Current (HFEC)
inspection the fuselage skin of the
forward skin panel for any crack, on
both left and right sides of the air-
plane on the aft fastener column
forward of STA 259.5 between S-19
and S-24.
Do a one-time external detailed in-
spection for cracked or deformed
countersunk rivet heads on the two
fastener columns forward of STA
259.5 between S-19 and S-24, on
both left and right sides of the air-
plane.
None.All AirplanesGroup 2
(a) 'preventive modification' refers to the fastener modification accomplished in accordance with SB 737-53-
1267 Original Issue or SB 737-53-1076 Revision 1, Revision 2, Revision 3 or Revision 4 when countersunk
production fasteners were replaced by protruding head fasteners on the forward fastener column forward
of STA 259.5 between S-19 and S-24 on the left or right side of the airplane.
REASON FOR REVISION
This revision is sent to provide updated and new inspection requirements, changed compliance time requirements,
updated repair instructions, and changed airplane groupings. The SB has been elevated to an alert status in
this revision.
In this revision:
– A new inspection of the skin at the aft fastener column, for the left and right sides of the aircraft, has been
added.
– Post preventive modification inspections are required on preventive modifications done in accordance with
SB 737-53-1267 Original Issue or 737-53-1076 Revision 1, Revision 2, Revision 3 or Revision 4.
– A new inspection procedure is recommended at locations without a preventive modification installed.
– A new trim out repair, for the left hand side only, has been added.
– A mandatory modification as was given in SB 737-53-1267 Original Issue is no longer required.
– A new one-time detailed inspection of production countersunk rivets is required.
– Airplanes line numbers 1-291 are moved from Group 1 to new Group 2.
These sections were changed:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
6 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 7

1. In Summary - Background, updated information and added planning data table.
2. In Summary - Action, updated information.
3. In Summary, revised the illustration.
4. In Paragraph 1.A.1, Airplanes, Line numbers 1-291 are moved from Group 1 to new Group 2. Group
1, Configuration 1 and 2 descriptions are changed and Group 1, configuration 3 is deleted.
5. In Paragraph 1.C., Reason, updated information.
6. In Paragraph 1.D., Description, updated information.
7. In Paragraph 1.E., Compliance, updated compliance table information and added AD statement(s).
8. In Paragraph 1.F., Approval, updated AMOC statement.
9. In Paragraph 1.G., Manpower, included new tables for skin inspections and repairs.
10. In Paragraph 1.I., Electrical Load Data, added information.
11. In Paragraph 1.J., References, updated list of references and added drawings supplied and used in
the preparation of this service bulletin information.
12. In Paragraph 1.K., Publications Affected, updated and added information.
13. Added Paragraph 1.M., Software Accomplishment Summary.
14. In Paragraph 2.C., Parts Necessary for Each Airplane, updated information.
15. In Paragraph 3.B., Work Instructions, updated instructions for inspections and repairs.
16. Figure 1 and Figure 2, changed to show new and additional inspection requirements, revised applicability.
17. Figure 7 and Figure 8, added for fastener head inspections.
18. Figure 9 through 12, added for post preventive modification inspections.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Pages with no vertical lines have no changes.
REVISION HISTORY
November 28, 2006Original Issue:
March 08, 2016Revision 1:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
7 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 8

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
8 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
737
Service Bulletin
ALERT
SummaryNumber: 737-53A1267Original Issue: November 28, 2006
Revision 1: March 08, 2016
ATA System: 5331 5311
SUBJECT: FUSELAGE - Skin - STA 259.5 Circumferential Butt Splice - Inspection and Repair
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin gives instructions to do inspections for any crack on the forward skin panel at the Station
(STA) 259.5 circumferential butt splice between stringers 19 and 24 on the left and right side of the airplane. If
the work given in this service bulletin is not accomplished, any crack in the forward skin panel could remain
undetected. If multiple cracks occur, they can link up and create a larger fatigue crack that would result in a
possible decompression and loss of structural integrity of the airplane.
Two operators have found cracks that have linked up at the forward column of fasteners in the forward skin
panel at the circumferential butt splice between stringers 19L and 24L. One airplane had 69,350 total flight cycles
and cracks linked up at 5 fastener holes. The second airplane had 68,323 total flight cycles and inspections in
accordance with original issue of this SB found 23 cracks, with cracks linked up at 3 fastener holes. In addition,
5 fastener holes were cracked at the aft column of fasteners in the forward skin panel at the circumferential butt
splice between stringers 19L and 24L. Additionally, there are 20 other crack findings on airplanes with between
42,308 and 70,202 total flight cycles. There is also one report of cracked and deformed rivet manufactured
heads in the forward column of fasteners in combination with skin cracks at the same locations.
The countersunk fasteners in both the forward and aft column of fasteners in the forward skin panel create a
knife-edge condition in skin panels on both the left and right sides of the airplane. A higher stress exists in the
left panel as the left and right panel designs are different. Airplanes after line number 2565 have solid skins
without attached fillers and the skin is thicker. Airplanes after line number 2565 are not affected by this service
bulletin.
The forward skin panel at STA 259.5 circumferential butt splice between stringers 19L and 24L has been
determined to be structure that is susceptible to Widespread Fatigue Damage (WFD).
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
9 of 102

### Page 10

ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesYesWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
NoOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION
Group 1, Configuration 1:
Do a detailed inspection and a High Frequency Eddy Current (HFEC) surface inspection for any crack of the
skin around the head of the production countersunk fasteners on the forward and aft fastener columns of the
forward skin panel at the STA 259.5 circumferential butt splice, left and right side of airplane between stringers
19 and 24. If any crack is found, repair in accordance with the applicable structural repair manual sections given
in this service bulletin. For the left side only, a trim out repair is available as an option. If no crack is found, repeat
the inspections at the times specified in Paragraph 1.E., Compliance.
Group 1:
Do a one-time detailed inspection for rivet defects in production countersunk rivets, in both forward and aft
fastener columns of the forward skin panel at the STA 259.5 circumferential butt splice, left and right sides of
the airplane. A rivet defect is any cracked or misshapen rivet manufactured head that does not meet 737-100/200
SRM 51-30-02, 737-300 SRM 51-40-02, 737-400 SRM 51-40-02 or 737-500 SRM 51-40-02 installation
requirements. If no rivet defect is found, no further action is required. If any rivet defect is found, contact The
Boeing Company for repair instructions and do the repair.
Group 1, Configuration 2:
Do a detailed inspection and a HFEC surface inspection for any crack of the skin around the head of the protruding
head fasteners of the forward column and the production countersunk fasteners of the aft column of the forward
skin panel at the STA 259.5 circumferential butt splice, left and right sides of the aircraft between stringers 19
and 24, that have the service bulletin 737-53-1267 Original Issue or SB 737-53-1076 Revision 1, Revision 2,
Revision 3 or Revision 4 preventive modification installed. If no crack is found, repeat the inspections at the
times specified in Paragraph 1.E., Compliance. If any crack is found, contact The Boeing Company for repair
instructions and do the repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
10 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 11

Group 2:
Boeing endorses the FAA rules related to Limit of Validity (LOV) and recommends immediate and permanent
removal from service of any airplanes upon reaching the LOV, whether or not it is operated under FAA jurisdiction.
As such, Boeing no longer provides maintenance instructions for airplanes that have accumulated flight cycles
beyond the LOV. Airplanes in Group 2 (line numbers 1-291) have accumulated flight cycles beyond the LOV of
the maintenance program. 14 CFR 121.1115 and 129.115 prohibit operation of an airplane beyond its LOV.
EFFECTIVITY
737-100/-200/-200C/-300/-400/-500 Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of affected
airplane(s).
COMPLIANCE
Federal Aviation Administration (FAA) Airworthiness Directive AD 2007-26-04 is related to this service bulletin.
The effective date of AD 2007-26-04 is January 22, 2008.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection and/or repair procedures given in this service
bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
11 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 12 (OCR)

BOEING SERVICE BULLETIN 737-53A1267
ALERT  ALERT
STA 259.5
CREASE LINE
_ S-17
- S-19
SEE  -S-24
INSPECT SKIN OF THE FORWARD SKIN PANEL FOR ANY CRACK AROUND THE HEADS OF THE
FASTENERS ON THE FORWARD AND AFT FASTENER COLUMNS OF THE CIRCUMFERENTIAL BUTT
SPLICE AT STA 259.5 BETWEEN STRINGERS 19 AND 24 ON THE LEFT AND RIGHT SIDES OF
THE AIRPLANE. DO A ONE TIME DETAILED INSPECTION FOR PRODUCTION COUNTERSINK RIVET
DEFECTS IN BOTH FORWARD AND AFT COLUMNS OF THE CIRCUMFERENTIAL BUTT SPLICE. IF
ANY CRACK FOUND, DO THE REPAIR AS SPECIFIED IN THIS BULLETIN.
STA 259.50  BUTT SPLICE  UPPER AFT
UPPER FORWARD  SKIN PANEL
SKIN PANEL
- STRINGER 19
CIRCUMFERENTIAL
- LAP JOINT
BUTT SPLICE FORWARD
FASTENER ROW
LAP JOINT
EXAMPLE CRACKS
SPLICE STRAP  5-20
(REF)  SPLICE STRAP
EXAMPLE CRACKS
LOWER FORWARD SKIN PANEL  - LOWER AFT
SKIN PANEL
FORWARD FASTENER COLUMN  EDGE OF
SKIN PANEL
AFT FASTENER COLUMN
INSPECTION AREA  D38143
Original Issue: November 28, 2006
Revision 1: March 08, 2016  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  737-53A1267
Work - See page 1 for details.  12 of 102

### Page 13

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-53A1267
Original Issue: November 28, 2006
Revision 1: March 08, 2016
ATA System: 5331 5311
SUBJECT: FUSELAGE - Skin - STA 259.5 Circumferential Butt Splice - Inspection and Repair
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D6-19567 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is for the airplanes shown below.
NOTE: As the Group configurations are described below, a single airplane may meet the
description of more then one configuration. If an airplane has more then one Group
configuration operators must do the work given in this service bulletin for the applicable
configuration of each area.
DESCRIPTIONCONFIGURATIONGROUP
737-200, 200C, 300, 400, 500 airplane line number 292-2565-1
Areas of the STA 259.5 circumferential butt splice that have not had
the preventive modification installed in accordance with SB
737-53-1267 Original Issue or 737-53-1076 Revision 1, Revision 2,
Revision 3 or Revision 4.
1
Areas of the STA 259.5 circumferential butt splice that have had the
preventive modification installed in accordance with SB 737-53-1267
Original Issue or 737-53-1076 Revision 1, Revision 2, Revision 3 or
Revision 4.
2
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
13 of 102

### Page 14

DESCRIPTIONCONFIGURATIONGROUP
737-100, 200, 200C airplane line number 1 to 291-2
Airplane Models:
737-100, 737-200, 737-200C, 737-300, 737-400, 737-500
GroupVariable Number
2PA001 - PA022
2PA099
2PA231 - PA232
2PC001 - PC005
2PG001 - PG075
2PG199
2PG201 - PG230
2PG251 - PG255
2PG271 - PG279
2PG301 - PG314
2PG331 - PG332
2PG351 - PG356
2PG375
2PG401 - PG403
2PG431 - PG442
2PG471 - PG475
2PG501 - PG505
2PG571 - PG583
1PG584 - PG586
2PG621 - PG630
2PG651 - PG652
2PG701 - PG705
1PH001
1PH011 - PH013
1PH021 - PH024
2PH701 - PH715
2PH731 - PH732
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
14 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 15

GroupVariable Number
2PH741 - PH742
1PH743
2PJ001 - PJ002
1PJ003 - PJ009
2PJ031 - PJ032
2PJ071 - PJ072
2PJ101 - PJ104
1PJ105 - PJ119
1PJ201 - PJ219
1PJ301 - PJ302
1PJ551 - PJ552
1PK026 - PK029
1PK041 - PK053
1PK061 - PK070
1PK081 - PK082
1PK091 - PK099
1PK101 - PK103
1PK111 - PK120
1PK141 - PK146
1PK201 - PK204
1PK211 - PK223
1PK231 - PK241
1PK251 - PK258
1PK271 - PK274
1PK281 - PK289
1PK291
1PK301 - PK318
1PK341
1PK351 - PK361
1PK391
1PK431 - PK433
1PK451 - PK452
1PK461 - PK469
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
15 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 16

GroupVariable Number
1PK495
1PK501 - PK504
1PK511 - PK515
1PK519
1PK521 - PK528
1PK541 - PK565
1PK581
1PK591 - PK599
1PK601 - PK617
1PK621 - PK637
1PK641 - PK642
1PK661 - PK666
1PK671 - PK681
1PK691 - PK697
1PK711 - PK716
1PK731 - PK765
1PK771 - PK779
1PK801 - PK804
1PK819 - PK827
1PK830
1PK861 - PK863
1PK871 - PK874
1PK881 - PK884
1PK901 - PK938
1PK971 - PK974
1PL001 - PL028
1PL061
1PL081
1PL101 - PL113
1PL151
1PL171 - PL172
1PL201 - PL203
1PL221
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
16 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 17

GroupVariable Number
1PL401 - PL417
1PL421
1PL441
1PL451 - PL456
1PL471
1PL491
1PL501 - PL506
1PL551 - PL562
1PL581
1PL601 - PL603
1PL611
1PL621 - PL626
1PL631 - PL632
2PL711 - PL712
2PL716
1PL717 - PL747
1PL756
1PL758
1PL761 - PL770
1PL781 - PL788
1PL793
2PL801 - PL803
1PM001 - PM006
1PM016 - PM017
1PM021 - PM023
1PM051 - PM066
1PM101 - PM119
1PM141 - PM142
1PM171
1PM181
1PM251 - PM255
1PM281 - PM283
1PM381 - PM399
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
17 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 18

GroupVariable Number
1PM401 - PM417
1PM541 - PM547
1PM551 - PM564
1PN001 - PN002
1PN021 - PN043
1PN081 - PN086
1PN101 - PN117
1PN131 - PN163
1PN401 - PN420
1PN431 - PN433
1PN451 - PN456
1PN471 - PN474
1PN481
1PN491 - PN493
1PN501 - PN502
1PN511 - PN512
1PN521
1PP001 - PP054
1PP101 - PP169
1PP181 - PP199
1PP201 - PP205
1PP221
1PP231 - PP243
1PP281 - PP286
1PP301 - PP305
1PP351 - PP353
1PP376 - PP384
1PP391 - PP393
1PP401 - PP440
1PP471 - PP475
1PP501 - PP517
1PP521 - PP522
1PP631 - PP634
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
18 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 19

GroupVariable Number
1PP651 - PP652
1PP671 - PP699
1PP701 - PP733
1PP771 - PP779
1PP801 - PP808
1PP821 - PP827
1PP831 - PP848
1PP851 - PP852
1PP861 - PP875
1PP891 - PP899
1PP901 - PP936
1PP946 - PP948
1PP951 - PP952
1PP961 - PP967
1PP981 - PP991
1PP993
1PQ001 - PQ016
1PQ026 - PQ041
1PQ051 - PQ092
1PQ101 - PQ199
1PQ201 - PQ202
1PQ221 - PQ237
1PQ241 - PQ243
1PQ251 - PQ267
1PQ281 - PQ296
1PQ301 - PQ307
1PQ331 - PQ332
1PQ341 - PQ344
1PQ361 - PQ369
1PQ401 - PQ408
1PQ411 - PQ413
1PQ421
1PQ471 - PQ473
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
19 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 20

GroupVariable Number
1PQ479 - PQ481
1PQ486 - PQ487
1PQ491 - PQ493
1PQ771
1PQ791 - PQ793
1PQ801 - PQ805
1PQ931 - PQ932
1PS601 - PS616
1PS631
1PS636 - PS638
1PS641 - PS644
1PS651 - PS657
1PS666 - PS669
1PS691 - PS692
1PS701 - PS703
1PS751 - PS762
1PT001 - PT011
1PT021 - PT028
1PT041 - PT064
1PT101 - PT105
1PT121 - PT125
1PT146 - PT148
1PT161 - PT170
1PT181 - PT187
1PT211 - PT220
1PT295
1PT301 - PT306
1PT331 - PT360
1PT381 - PT399
1PT401 - PT438
1PT501 - PT512
1PT561 - PT565
1PT581 - PT584
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
20 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 21

GroupVariable Number
1PT611 - PT621
1PT641 - PT642
1PT651 - PT655
1PT671 - PT672
1PT701 - PT703
1PU001 - PU025
1PV001 - PV055
1PV201 - PV203
1PV231 - PV237
1PV271 - PV272
1PV281 - PV283
1PW001 - PW054
1PW061 - PW068
1PW072
1PW091 - PW094
1PW101 - PW102
1PW106
1PW111 - PW120
1PW156 - PW157
1PW161 - PW167
1PW201 - PW245
1PW261
1PW265 - PW268
1PW278
1PW281 - PW284
1PW293
1PW296
1PW301 - PW327
1PW461 - PW467
1PW501 - PW504
1PW511 - PW520
1PW526
1PW531 - PW546
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
21 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 22

GroupVariable Number
1PW556 - PW557
1PW561 - PW564
1PW571 - PW576
1PW591 - PW596
1PW611 - PW620
1PW631 - PW634
1PW661 - PW662
1PW681 - PW683
1PW701 - PW702
1PW711 - PW717
1PW741 - PW742
1PW761
1PW771
2PX071
2PX701
2PY001 - PY008
2PY021
1PY022
2PY031
1PY036 - PY037
1PY046 - PY048
1PY051 - PY053
1PY056 - PY057
1PY101 - PY103
1PY111 - PY113
1PY131 - PY135
1PY141 - PY143
1PY151 - PY154
1PY156 - PY157
1PY161 - PY162
1PY166
1PY191
1PY201
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
22 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 23

GroupVariable Number
1PY221 - PY222
1PY231
1PY241 - PY244
1PY270 - PY275
1PY281
1PY286
2PY301 - PY304
2PY321 - PY323
2PY341 - PY346
2PY361 - PY362
2PY381
1PY401
1PY409 - PY411
1PY421 - PY422
1PY441
1PY451
1PY461 - PY463
1PY591 - PY595
1PY611 - PY612
1PY621
1PY631
1PY651
1PY671 - PY672
1PY721
1PY741
2. Spares Affected
None.
B. Concurrent Requirements
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
23 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 24

C. Reason
This service bulletin gives instructions to do inspections for any crack on the forward skin panel at the
Station (STA) 259.5 circumferential butt splice between stringers 19 and 24 on the left and right side
of the airplane. If the work given in this service bulletin is not accomplished, any crack in the forward
skin panel could remain undetected. If multiple cracks occur, they can link up and create a larger fatigue
crack that would result in a possible decompression and loss of structural integrity of the airplane.
Two operators have found cracks that have linked up at the forward column of fasteners in the forward
skin panel at the circumferential butt splice between stringers 19L and 24L. One airplane had 69,350
total flight cycles and cracks linked up at 5 fastener holes. The second airplane had 68,323 total flight
cycles and inspections in accordance with original issue of this SB found 23 cracks, with cracks linked
up at 3 fastener holes. In addition, 5 fastener holes were cracked at the aft column of fasteners in the
forward skin panel at the circumferential butt splice between stringers 19L and 24L. Additionally, there
are 20 other crack findings on airplanes with between 42,308 and 70,202 total flight cycles. There is
also one report of cracked and deformed rivet manufactured heads in the forward column of fasteners
in combination with skin cracks at the same locations.
The countersunk fasteners in both the forward and aft column of fasteners in the forward skin panel
create a knife-edge condition in skin panels on both the left and right sides of the airplane. A higher
stress exists in the left panel as the left and right panel designs are different. Airplanes after line number
2565 have solid skins without attached fillers and the skin is thicker. Airplanes after line number 2565
are not affected by this service bulletin.
The forward skin panel at STA 259.5 circumferential butt splice between stringers 19L and 24L has
been determined to be structure that is susceptible to Widespread Fatigue Damage (WFD).
D. Description
Group 1, Configuration 1:
Do a detailed inspection and a High Frequency Eddy Current (HFEC) surface inspection for any crack
of the skin around the head of the production countersunk fasteners on the forward and aft fastener
columns of the forward skin panel at the STA 259.5 circumferential butt splice, left and right side of
airplane between stringers 19 and 24. If any crack is found, repair in accordance with the applicable
structural repair manual sections given in this service bulletin. For the left side only, a trim out repair
is available as an option. If no crack is found, repeat the inspections at the times specified in Paragraph
1.E., Compliance.
Group 1:
Do a one-time detailed inspection for rivet defects in production countersunk rivets, in both forward
and aft fastener columns of the forward skin panel at the STA 259.5 circumferential butt splice, left and
right sides of the airplane. A rivet defect is any cracked or misshapen rivet manufactured head that
does not meet 737-100/200 SRM 51-30-02, 737-300 SRM 51-40-02, 737-400 SRM 51-40-02 or 737-500
SRM 51-40-02 installation requirements. If no rivet defect is found, no further action is required. If any
rivet defect is found, contact The Boeing Company for repair instructions and do the repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
24 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 25

Group 1, Configuration 2:
Do a detailed inspection and a HFEC surface inspection for any crack of the skin around the head of
the protruding head fasteners of the forward column and the production countersunk fasteners of the
aft column of the forward skin panel at the STA 259.5 circumferential butt splice, left and right sides of
the aircraft between stringers 19 and 24, that have the service bulletin 737-53-1267 Original Issue or
SB 737-53-1076 Revision 1, Revision 2, Revision 3 or Revision 4 preventive modification installed. If
no crack is found, repeat the inspections at the times specified in Paragraph 1.E., Compliance. If any
crack is found, contact The Boeing Company for repair instructions and do the repair.
Group 2:
Boeing endorses the FAA rules related to Limit of Validity (LOV) and recommends immediate and
permanent removal from service of any airplanes upon reaching the LOV, whether or not it is operated
under FAA jurisdiction. As such, Boeing no longer provides maintenance instructions for airplanes that
have accumulated flight cycles beyond the LOV. Airplanes in Group 2 (line numbers 1-291) have
accumulated flight cycles beyond the LOV of the maintenance program. 14 CFR 121.1115 and 129.115
prohibit operation of an airplane beyond its LOV.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
2-2, 2-5737-200, 737-200C
Group 1:
Affected Maintenance Zones
ZoneModel
202737-300, 737-400, 737-500
Group 2:
Affected Maintenance Zones
ZoneModel
2-2, 2-5737-100, 737-200, 737-200C
E. Compliance
Federal Aviation Administration (FAA) Airworthiness Directive AD 2007-26-04 is related to this service
bulletin. The effective date of AD 2007-26-04 is January 22, 2008.
The FAA will possibly release an additional Airworthiness Directive related to this service bulletin. The
Airworthiness Directive will make the compliance tasks and times given in this service bulletin mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
25 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 26

The Damage Tolerance Inspections (DTIs) specified in Tables 4 and 6 of Paragraph 1.E Compliance,
may be used in support of compliance with 14 Code of Federal Regulations, Section 121.1109 or
129.109.
Post repair DTI for the SRM repairs referenced in this service bulletin are specified within each of the
SRM repairs.
The referenced drawing 692A1001 affects Fatigue Critical Structure (FCS), but no new DTIs are
necessary.
Where the term 'preventive modification' is used in the compliance tables, it refers to the fastener
modification accomplished in accordance with SB 737-53-1267 Original Issue or SB 737-53-1076
Revision 1, Revision 2, Revision 3 or Revision 4 when countersunk production fasteners were replaced
by protruding head fasteners on the forward fastener column forward of STA 259.5 between S-19 and
S-24 on the left or right side of the airplane.
A logic diagram showing compliance tasks and compliance times is included as an aid in Appendices.
Do the required actions in accordance with Paragraph 3.B., Work Instructions.
Group 2:
Boeing endorses the FAA rules related to Limit of Validity (LOV) and recommends immediate and
permanent removal from service of any airplanes upon reaching the LOV, whether or not it is operated
under FAA jurisdiction. As such, Boeing no longer provides maintenance instructions for airplanes that
have accumulated flight cycles beyond the LOV. Airplanes in Group 2 (line numbers 1-291) have
accumulated flight cycles beyond the LOV of the maintenance program. 14 CFR 121.1115 and 129.115
prohibit operation of an airplane beyond its LOV.
Group 1, Configuration 1:
Table 1: External Skin Inspection - Left Side - STA 259.5 Circumferential Butt Splice.
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 4,500
flight cycles af-
ter the Revision
1 date of this
service bulletin,
but not to ex-
ceed 54,500 to-
tal flight cycles.
Before 46,000
total flight cy-
cles.
Do PART 1: SKIN IN-
SPECTIONS - LEFT
SIDE for any crack. (c)
Airplanes that have not ac-
complished the detailed in-
spection and High Frequen-
cy Eddy Current (HFEC)
inspection in accordance
with SB 737-53-1267 Origi-
nal Issue or SB 737-
53A1267 Revision 1.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
26 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 27

Group 1, Configuration 1:
Table 1: External Skin Inspection - Left Side - STA 259.5 Circumferential Butt Splice.
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 3,000
flight cycles af-
ter the Revision
1 date of this
service bulletin,
but not to ex-
ceed 9,000 flight
cycles after the
last inspection
accomplished in
accordance with
AD 2007-26-04.
Within 6,000
flight cycles af-
ter the last in-
spection accom-
plished in accor-
dance with AD
2007-26-04.
Do PART 1: SKIN IN-
SPECTIONS - LEFT
SIDE for any crack. (c)
Airplanes that have accom-
plished the detailed inspec-
tion and High Frequency
Eddy Current (HFEC) in-
spection in accordance
with SB 737-53-1267 Origi-
nal Issue or SB 737-
53A1267 Revision 1.
6,000 flight cycles.
(b)
--Repeat PART 1: SKIN
INSPECTIONS - LEFT
SIDE for any crack. (c)
CONDITION 1: NO
CRACK FOUND.
--Before further
flight.
OPTION 1 (ACTION 1):
Do PART 4: SKIN RE-
PAIR. (a)
CONDITION 2: ANY
CRACK FOUND.
6,000 flight cycles.
(b)
--OPTION 1 (ACTION 2):
Repeat PART 1: SKIN
INSPECTIONS - LEFT
SIDE for any crack at the
unrepaired areas. (c)
--Before further
flight.
OPTION 2 : Do PART 5:
SKIN TRIM-OUT RE-
PAIR. (b)
(a) Accomplishment of PART 4: SKIN REPAIR for left side skin cracks will terminate the Table 1 repeat in-
spections under the repair area only. S-19 is an SRM stay out zone for aero sensors for both left and
right sides of the airplane.
(b) Accomplishment of PART 5: SKIN TRIM-OUT REPAIR terminates the repeat inspections in Table 1.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
27 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 28

Group 1, Configuration 1:
Table 1: External Skin Inspection - Left Side - STA 259.5 Circumferential Butt Splice.
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
(c) It is not required to accomplish PART 1 inspections for areas under existing external repair doublers
provided:
1. The installed repair was approved by the Manager, Aircraft Certification Office, FAA or by a
Boeing Company authorized representative who was authorized by the FAA to make such
findings, and the installed repair extends a minimum of three fastener columns forward of the
skin trim out.
OR
2. The installed repair was accomplished in accordance with Figure 49 of 737-100/200 SRM 53-
30-03, or Repair 11 of 737-300 SRM 53-10-01, 737-400 SRM 53-10-01, 737-500 SRM 53-10-
01.
If the repair does not meet either of the repair criteria given above, contact The Boeing Company for in-
structions and do the instructions.
Group 1, Configuration 1:
Table 2: External Skin Inspection - Right Side - STA 259.5 Circumferential Butt Splice.
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 4,500
flight cycles af-
ter the Revision
1 date of this
service bulletin.
Before 66,000
total flight cy-
cles.
Do PART 2: SKIN IN-
SPECTIONS - RIGHT
SIDE for any crack. (b)
All Airplanes.
6,000 flight cycles.--Repeat PART 2: SKIN
INSPECTIONS - RIGHT
SIDE for any crack. (b)
CONDITION 3: NO
CRACK FOUND.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
28 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 29

Group 1, Configuration 1:
Table 2: External Skin Inspection - Right Side - STA 259.5 Circumferential Butt Splice.
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
--Before further
flight.
CONDITION 4 (ACTION
1): Do PART 4: SKIN
REPAIR. (a)
CONDITION 4: ANY
CRACK FOUND.
6,000 flight cycles.--CONDITION 4 (ACTION
2): Repeat PART 2: SKIN
INSPECTIONS - RIGHT
SIDE for any crack at the
unrepaired areas. (b)
--Before further
flight.
CONDITION 4 (ACTION
3): For areas not ad-
dressed by PART 4, con-
tact The Boeing Compa-
ny for repair instructions
and do the repair.
(a) Accomplishment of PART 4: SKIN REPAIR for right side skin cracks will terminate the Table 2 repeat
inspections under the repair area only. S-19 is an SRM stay out zone for aero sensors for both left and
right sides of the airplane.
(b) It is not required to accomplish PART 2 inspections for areas under existing external repair doublers
provided:
1. The installed repair was approved by the Manager, Aircraft Certification Office, FAA or by a
Boeing Company authorized representative who was authorized by the FAA to make such
findings, and the installed repair extends a minimum of three fastener columns forward of the
skin trim out.
OR
2. The installed repair was accomplished in accordance with Figure 49 of 737-100/200 SRM 53-
30-03, or Repair 11 of 737-300 SRM 53-10-01, 737-400 SRM 53-10-01, 737-500 SRM 53-10-
01.
If the repair does not meet either of the repair criteria given above, contact The Boeing Company for in-
structions and do the instructions.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
29 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 30

Group 1:
Table 3 : External Countersunk Rivet Inspection - Left and Right Side - STA 259.5 Circumferential Butt
Splice.
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 4,500
flight cycles af-
ter the Revision
1 date of this
service bulletin
Before 46,000
total flight cy-
cles.
Do PART 3: COUNTER-
SUNK RIVET INSPEC-
TIONS - LEFT AND
RIGHT SIDES for rivet
defects. (a) (b)
All Airplanes.
---No further action re-
quired.
CONDITION 5: NO RIVET
DEFECT FOUND.
--Before further
flight.
Contact The Boeing
Company for repair in-
structions and do the re-
pair.
CONDITION 6: ANY RIV-
ET DEFECT FOUND.
(a) Rivet defect is any cracked or misshapen rivet manufactured head that does not meet 737-100/200 SRM
51-30-02, 737-300 SRM 51-40-02, 737-400 SRM 51-40-02 or 737-500 SRM 51-40-02 installation require-
ments.
(b) It is not required to accomplish PART 3 inspections for areas under existing external repair doublers
provided:
1. The installed repair was approved by the Manager, Aircraft Certification Office, FAA or by a
Boeing Company authorized representative who was authorized by the FAA to make such
findings, and the installed repair extends a minimum of three fastener columns forward of the
skin trim out.
OR
2. The installed repair was accomplished in accordance with Figure 49 of 737-100/200 SRM 53-
30-03, or Repair 11 of 737-300 SRM 53-10-01, 737-400 SRM 53-10-01, 737-500 SRM 53-10-
01.
If the repair does not meet either of the repair criteria given above, contact The Boeing Company for in-
structions and do the instructions.
Group 1, Configuration 2:
Table 4: External Post Preventive Modification Inspections - Skin - Left Side - STA 259.5 Circumferential
Butt Splice - Forward Fastener Column.
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,600
flight cycles af-
ter the Revision
1 date of this
service bulletin.
Within 26,000
flight cycles af-
ter accomplish-
ment of the
modification.
Do PART 6: SKIN IN-
SPECTIONS AT FOR-
WARD FASTENER
COLUMN - LEFT SIDE
for any crack. (a)
ALL AIRPLANES.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
30 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 31

Group 1, Configuration 2:
Table 4: External Post Preventive Modification Inspections - Skin - Left Side - STA 259.5 Circumferential
Butt Splice - Forward Fastener Column.
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
1,600 flight cycles.-Repeat PART 6: SKIN
INSPECTIONS AT FOR-
WARD FASTENER
COLUMN - LEFT SIDE
for any crack. (a)
CONDITION 7: NO
CRACK FOUND.
-Before further flight.Contact The Boeing
Company for repair in-
structions and do the re-
pair.
CONDITION 8: ANY
CRACK FOUND.
(a) It is not required to accomplish PART 6 inspections for areas under existing external repair doublers
provided:
1. The installed repair was approved by the Manager, Aircraft Certification Office, FAA or by a
Boeing Company authorized representative who was authorized by the FAA to make such
findings, and the installed repair extends a minimum of three fastener columns forward of the
skin trim out.
OR
2. The installed repair was accomplished in accordance with Figure 49 of 737-100/200 SRM 53-
30-03, or Repair 11 of 737-300 SRM 53-10-01, 737-400 SRM 53-10-01, 737-500 SRM 53-10-
01.
If the repair does not meet either of the repair criteria given above, contact The Boeing Company for in-
structions and do the instructions.
Group 1, Configuration 2:
Table 5: External Inspections - Skin - Left Side - STA 259.5 Circumferential Butt Splice - Aft Fastener
Column.
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 4,500 flight cycles after the
Revision 1 date of this service
bulletin.
Do PART 7: SKIN IN-
SPECTIONS AT AFT
FASTENER COLUMN -
LEFT SIDE for any crack.
(a)
ALL AIRPLANES.
6,000 flight cycles.-Repeat PART 7: SKIN
INSPECTIONS AT AFT
FASTENER COLUMN -
LEFT SIDE for any crack.
(a)
CONDITION 9: NO
CRACK FOUND.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
31 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 32

Group 1, Configuration 2:
Table 5: External Inspections - Skin - Left Side - STA 259.5 Circumferential Butt Splice - Aft Fastener
Column.
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further flight.Contact The Boeing
Company for repair in-
structions and do the re-
pair.
CONDITION 10: ANY
CRACK FOUND.
(a) It is not required to accomplish PART 7 inspections for areas under existing external repair doublers
provided:
1. The installed repair was approved by the Manager, Aircraft Certification Office, FAA or by a
Boeing Company authorized representative who was authorized by the FAA to make such
findings, and the installed repair extends a minimum of three fastener columns forward of the
skin trim out.
OR
2. The installed repair was accomplished in accordance with Figure 49 of 737-100/200 SRM 53-
30-03, or Repair 11 of 737-300 SRM 53-10-01, 737-400 SRM 53-10-01, 737-500 SRM 53-10-
01.
If the repair does not meet either of the repair criteria given above, contact The Boeing Company for in-
structions and do the instructions.
Group 1, Configuration 2:
Table 6: External Post Preventive Modification Inspections - Skin - Right Side - STA 259.5 Circumferential
Butt Splice - Forward Fastener Column.
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,600
flight cycles af-
ter the Revision
1 date of this
service bulletin.
Within 26,000
flight cycles af-
ter accomplish-
ment of the
modification.
Do PART 8: SKIN IN-
SPECTIONS AT FOR-
WARD FASTENER
COLUMN - RIGHT SIDE
for any crack. (a)
ALL AIRPLANES.
1,600 flight cycles.-Repeat PART 8: SKIN
INSPECTIONS AT FOR-
WARD FASTENER
COLUMN - RIGHT SIDE
for any crack. (a)
CONDITION 11: NO
CRACK FOUND.
-Before further flight.Contact The Boeing
Company for repair in-
structions and do the re-
pair.
CONDITION 12: ANY
CRACK FOUND.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
32 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 33

Group 1, Configuration 2:
Table 6: External Post Preventive Modification Inspections - Skin - Right Side - STA 259.5 Circumferential
Butt Splice - Forward Fastener Column.
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
(a) It is not required to accomplish PART 8 inspections for areas under existing external repair doublers
provided:
1. The installed repair was approved by the Manager, Aircraft Certification Office, FAA or by a
Boeing Company authorized representative who was authorized by the FAA to make such
findings, and the installed repair extends a minimum of three fastener columns forward of the
skin trim out.
OR
2. The installed repair was accomplished in accordance with Figure 49 of 737-100/200 SRM 53-
30-03, or Repair 11 of 737-300 SRM 53-10-01, 737-400 SRM 53-10-01, 737-500 SRM 53-10-
01.
If the repair does not meet either of the repair criteria given above, contact The Boeing Company for in-
structions and do the instructions.
Group 1, Configuration 2:
Table 7: External Inspections - Skin - Right Side - STA 259.5 Circumferential Butt Splice - Aft Fastener
Column.
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 4,500 flight cycles after the
Revision 1 date of this service
bulletin.
Do PART 9: SKIN IN-
SPECTIONS AT AFT
FASTENER COLUMN -
RIGHT SIDE for any
crack. (a)
ALL AIRPLANES.
6,000 flight cycles.-Repeat PART 9: SKIN
INSPECTIONS AT AFT
FASTENER COLUMN -
RIGHT SIDE for any
crack. (a)
CONDITION 13: NO
CRACK FOUND.
-Before further flight.Contact The Boeing
Company for repair in-
structions and do the re-
pair.
CONDITION 14: ANY
CRACK FOUND.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
33 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 34

Group 1, Configuration 2:
Table 7: External Inspections - Skin - Right Side - STA 259.5 Circumferential Butt Splice - Aft Fastener
Column.
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
(a) It is not required to accomplish PART 9 inspections for areas under existing external repair doublers
provided:
1. The installed repair was approved by the Manager, Aircraft Certification Office, FAA or by a
Boeing Company authorized representative who was authorized by the FAA to make such
findings, and the installed repair extends a minimum of three fastener columns forward of the
skin trim out.
OR
2. The installed repair was accomplished in accordance with Figure 49 of 737-100/200 SRM 53-
30-03, or Repair 11 of 737-300 SRM 53-10-01, 737-400 SRM 53-10-01, 737-500 SRM 53-10-
01.
If the repair does not meet either of the repair criteria given above, contact The Boeing Company for in-
structions and do the instructions.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
In addition, the Manager of the FAA Seattle Aircraft Certification Office approves accomplishment of
the STA 259.5 left and right side forward fastener column skin inspections, left and right side skin
repairs, left side trim-out repair and associated compliance times in accordance with Boeing Alert
Service Bulletin 737-53A1267 Revision 1 as an alternative method of compliance to the inspections
and repair required by paragraphs (f) and (g) of AD 2007-26-04. All provisions of AD 2007-26-04 that
are not specifically referenced in the above statement remain fully applicable and must be complied
with accordingly. Where Boeing Alert Service Bulletin 737-53A1267 Revision 1 specifies to contact
The Boeing Company for repair instructions, before further flight, do the repair using a method approved
in accordance with the procedures specified in paragraph (k) of AD 2007-26-04.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
34 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 35

G. Manpower
The table below shows an estimate of the task hours necessary to do the inspections and repair for
each Airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate
with operator task hour data if necessary. The estimate does not include lost time. These are some
examples of lost time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools.
Group 1, Configuration 1:
Parts 1 & 2 - External Skin Inspection
Elapsed HoursTask-HoursNumber of PersonsTask
4.504.501Figure 1
4.004.001Figure 2
8.508.50TOTAL FOR EACH AIRPLANE
Group 1:
Part 3 - EXTERNAL COUNTERSUNK RIVET HEAD INSPECTIONS - LEFT AND RIGHT SIDES
Elapsed HoursTask-HoursNumber of PersonsTask
1.301.301Figure 7
1.101.101Figure 8
2.402.40TOTAL FOR EACH AIRPLANE
Group 1:
Parts 4 & 5 - SKIN REPAIR AND SKIN TRIM -OUT REPAIR
Elapsed HoursTask-HoursNumber of PersonsTask
---PART 4: SKIN REPAIR
---PART 5: SKIN TRIM -OUT
REPAIR (Left Side only)
(a)(a)TOTAL FOR EACH AIRPLANE
(a) Hours necessary are dependent on inspection findings.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
35 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 36

Group 1, Configuration 2:
Parts 6 and 8 - EXTERNAL POST PREVENTIVE MODIFICATION SKIN INSPECTIONS AT FORWARD
COLUMN
Elapsed HoursTask HoursNumber of PersonsTask
2.302.301FIGURE 9
2.502.501FIGURE 11
4.804.80TOTAL FOR EACH AIRPLANE
Group 1, Configuration 2:
Parts 7 & 9 - EXTERNAL SKIN INSPECTIONS AT AFT FASTENER COLUMN
Elapsed HoursTask HoursNumber of PersonsTask
3.753.751FIGURE 10
2.502.501FIGURE 12
6.256.25TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
Weight and Balance changes affected by incorporation of this service bulletin are dependent on the
type, number and location of repairs done on each particular airplane. Weight and Balance are to be
calculated by the operator by weighing parts installed or removed. Operators should make necessary
revisions to the appropriate weight and balance report.
I. Electrical Load Data
Not applicable.
J. References
1. Existing Data:
a. Boeing Service Bulletin 737-53-1076, 737-53-1267
b. Boeing Service Letter 737-SL-51-042
c. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2007-26-04, 2008-08-23,
2008-09-13, 98-11-04 R1
d. Service Bulletin Index D6-19567
e. Standard Overhaul Practices Manual (SOPM) 20-41-05, 20-43-03, 20-44-04, 20-50-01,
20-50-19
f. 737 Non-Destructive Testing (NDT) Manual Part 6, 51-00-00, Part 6, 53-30-05
g. 737-100/200 Aircraft Maintenance Manual (AMM) 32-00-01
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
36 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 37

h. 737-100/200 Structural Repair Manual (SRM) 51-30-02, 53-30-03
i. 737-300/400/500 Aircraft Maintenance Manual (AMM) 32-00-01
j. 737-300 Structural Repair Manual (SRM) 51-40-02, 53-10-01
k. 737-400 Structural Repair Manual (SRM) 51-40-02, 53-10-01
l. 737-500 Structural Repair Manual (SRM) 51-40-02, 53-10-01
2. Data Supplied with this Service Bulletin:
a. Drawings:
ADCNDCN/REVSheetTitleDrawing No
--1FWD SKIN TRIMOUT - STA 259.50, STGR
19 AND STGR 24 (LHS ONLY) SERVICE
GENERAL REPAIR DRAWING
692A1001
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
SKIN AND STRINGER INSTL - SECTION 4165-45800-1
SKIN AND STRINGER INSTL - SECTION 4165-45800-150
SKIN AND STRINGER INSTL - SECTION 4165-45800-219
SKIN AND STRINGER INSTL - SECTION 4165-45800-220
SKIN AND STRINGER INSTL - SECTION 4165-45800-518
SKIN AND STRINGER INSTL - SECTION 4165-45800-617
SKIN AND STRINGER INSTL - SECTION 4165-45800-649
SKIN AND STRINGER INSTL - SECTION 4165-45800-674
SKIN AND STRINGER INSTL - SECTION 4165-45800-679
SKIN AND STRINGER INSTL - SECTION 4165-45800-832
BULKHEAD INSTALLATION STA 259.565-45804-1
BULKHEAD INSTALLATION STA 259.565-45804-148
BULKHEAD INSTALLATION STA 259.565-45804-508
BULKHEAD INSTALLATION STA 259.565-45804-572
The table above lists applicable drawings used to prepare this service bulletin. The drawings are
not necessary to make the specified changes, and are not supplied with this service bulletin. The
drawings may not be applicable to all airplane configurations or operators.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
37 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 38

K. Publications Affected
1. Publications:
Chapter-SectionPublication
53-10, 53-30737 Structural Repair Manual
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS. DTI requirements for the structure affected
are contained in Paragraph 1.E., Compliance of this service bulletin.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
38 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 39

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes, inspection and/or repair
procedures given in this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
The following parts or materials are necessary to do the change in this service bulletin. Parts and
materials in the manuals given in Paragraph 1.J., References, can also be necessary. Examine
operator part and material supply to make sure all necessary parts and materials are available.
NotesNameQTYPart Number / Specification
Refer to SOPM 20-43-03.Chemical Conversion Coat-
ing
as necessaryALODINE or IRIDITE
Refer to SOPM 20-44-04.Primeras necessaryBMS 10-79 TYPE III
(a) (b)Sealantas necessaryBMS 5-95
Refer to SOPM 20-41-05.Corrosion Inhibiting Com-
pound
as necessaryBMS 3-23, TYPE II
(a) Refer to the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
(b) Refer to SOPM 20-50-19.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
39 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 40

F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
40 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 41

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 737 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 737
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 737
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
5. A single airplane may meet the description of more then one configuration. If an
airplane has more then one Group configuration operators must do the work given
in this service bulletin for the applicable configuration of each area.
6. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate
full threaded fasteners (screws) needed for installation in this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
41 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 42

7. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
8. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
9. Boeing Service Letter 737-SL-51-042, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
10. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
11. If shading is used, shaded areas in Figures are to separate the non-critical and
non-authoritative information from the critical and authoritative information.
12. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an
OPTION number, do all of the ACTION numbers for that CONDITION number or
OPTION number.
13. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
14. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. An Alternative Method of
Compliance (AMOC) is required for any deviations to RC steps, including sub-steps
and identified figures. Steps not labeled as RC may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC. This is provided that the RC steps, including
sub-steps and identified figures, can still be done as specified, and the airplane can
be put back in an airworthy condition.
15. The term 'preventive modification', where it is used in this SB, refers to the fastener
modification accomplished in accordance with SB 737-53-1267 Original Issue or SB
737-53-1076 Revision 1,Revision 2, Revision 3 or Revision 4 when countersunk
production fasteners were replaced by protruding head fasteners on the forward
fastener column forward of BS 259.5 between S-19 and S-24 on the left or right side
of the airplane.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
42 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 43

B. WORK INSTRUCTIONS
Group 2:
Boeing endorses the FAA rules related to Limit of Validity (LOV) and recommends immediate and
permanent removal from service of any airplanes upon reaching the LOV, whether or not it is operated
under FAA jurisdiction. As such, Boeing no longer provides maintenance instructions for airplanes that
have accumulated flight cycles beyond the LOV. Airplanes in Group 2 (line numbers 1-291) have
accumulated flight cycles beyond the LOV of the maintenance program. 14 CFR 121.1115 and 129.115
prohibit operation of an airplane beyond its LOV.
1. Group 1:
Install GROUND LOCK ASSEMBLIES
WARNING: MAKE SURE THAT THE GROUND LOCK ASSEMBLIES ARE INSTALLED IN THE
MAIN AND NOSE LANDING GEAR. MOVEMENT OF THE LANDING GEAR CAN
CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT IF THOSE
PERSONS OR EQUIPMENT ARE NEAR THE LANDING GEAR.
a. Install ground lock assemblies in the nose and main gear. Refer to 737-100/200 AMM 32-00-01
or 737-300/400/500 AMM 32-00-01 as an accepted procedure.
2. Group 1, Configuration 1:
RC - Do PART 1: SKIN INSPECTIONS - LEFT SIDE for any crack.
a. CONDITION 1: NO CRACK FOUND.
(1) CONDITION 1: Repeat PART 1: SKIN INSPECTIONS - LEFT SIDE.
b. CONDITION 2: ANY CRACK FOUND.
(1) OPTION 1 (ACTION 1): Do PART 4: SKIN REPAIR.
(2) OPTION 1 (ACTION 2): Repeat PART 1: SKIN INSPECTIONS - LEFT SIDE for any crack
at the unrepaired areas.
(3) OPTION 2: Do PART 5: SKIN TRIM-OUT REPAIR.
3. Group 1, Configuration 1:
RC - Do PART 2: SKIN INSPECTIONS - RIGHT SIDE for any crack.
a. CONDITION 3: NO CRACK FOUND.
(1) Repeat PART 2: SKIN INSPECTIONS - RIGHT SIDE.
b. CONDITION 4: ANY CRACK FOUND.
(1) CONDITION 4 (ACTION 1): Do PART 4: SKIN REPAIR.
(2) CONDITION 4 (ACTION 2): Repeat PART 2: SKIN INSPECTIONS - RIGHT SIDE for
any crack at the unrepaired areas.
(3) CONDITION 4 (ACTION 3): For areas not addressed by PART 4, contact The Boeing
Company for repair instructions and do the repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
43 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 44

4. Group 1:
RC - Do PART 3: COUNTERSUNK RIVET INSPECTIONS - LEFT AND RIGHT SIDES for any
rivet defect.
a. CONDITION 5: NO RIVET DEFECT FOUND.
(1) PART 3: COUNTERSUNK RIVET INSPECTIONS - LEFT AND RIGHT SIDE is a one-time
inspection, no further action required.
b. CONDITION 6: ANY RIVET DEFECT FOUND.
(1) Contact The Boeing Company for repair instructions and do the repair.
5. Group 1, Configuration 2:
RC - Do PART 6: SKIN INSPECTIONS AT FORWARD FASTENER COLUMN - LEFT SIDE for
any crack.
a. CONDITION 7: NO CRACK FOUND.
(1) Repeat PART 6: SKIN INSPECTIONS AT FORWARD FASTENER COLUMN - LEFT
SIDE.
b. CONDITION 8: ANY CRACK FOUND.
(1) Contact The Boeing Company for repair instructions and do the repair.
6. Group 1, Configuration 2:
RC - Do PART 7: SKIN INSPECTIONS AT AFT FASTENER COLUMN - LEFT SIDE for any crack.
a. CONDITION 9: NO CRACK FOUND
(1) Repeat PART 7: SKIN INSPECTIONS AT AFT FASTENER COLUMN - LEFT SIDE.
b. CONDITION 10: ANY CRACK FOUND.
(1) Contact The Boeing Company for repair instructions and do the repair.
7. Group 1, Configuration 2:
RC - Do PART 8: SKIN INSPECTIONS AT FORWARD FASTENER COLUMN - RIGHT SIDE for
any crack.
a. CONDITION 11: NO CRACK FOUND.
(1) Repeat PART 8: SKIN INSPECTIONS AT FORWARD FASTENER COLUMN - RIGHT
SIDE.
b. CONDITION 12: ANY CRACK FOUND.
(1) Contact The Boeing Company for repair instructions and do the repair.
8. Group 1, Configuration 2:
RC - Do PART 9: SKIN INSPECTIONS AT AFT FASTENER COLUMN - RIGHT SIDE for any
crack.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
44 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 45

a. CONDITION 13: NO CRACK FOUND.
(1) Repeat PART 9: SKIN INSPECTIONS AT AFT FASTENER COLUMN - RIGHT SIDE.
b. CONDITION 14: ANY CRACK FOUND.
(1) Contact The Boeing Company for repair instructions and do the repair.
9. Group 1:
Remove GROUND LOCK ASSEMBLIES
a. Remove ground lock assemblies in the nose and main gear. Refer to 737-100/200 AMM
32-00-01 or 737-300/400/500 AMM 32-00-01 as an accepted procedure.
10. Put the airplane back to a serviceable condition.
PART 1: SKIN INSPECTIONS - LEFT SIDE
1. Do a detailed inspection and a High Frequency Eddy Current (HFEC) surface inspection on the
left side STA 259.5 circumferential butt splice for any crack in accordance with FIGURE 1.
NOTE: It is not required to accomplish PART 1 inspections for areas under existing external
repair doublers provided:
1. The installed repair was approved by the Manager, Aircraft Certification Office,
FAA or by a Boeing Company authorized representative who was authorized
by the FAA to make such findings, and the installed repair extends a minimum
of three fastener columns forward of the skin trim out.
OR
2. The installed repair was accomplished in accordance with Figure 49 of
737-100/200 SRM 53-30-03, or Repair 11 of 737-300 SRM 53-10-01, 737-400
SRM 53-10-01, 737-500 SRM 53-10-01.
If the repair does not meet either of the repair criteria given above, contact The
Boeing Company for instructions and do the instructions.
PART 2: SKIN INSPECTIONS - RIGHT SIDE
1. Do a detailed inspection and a HFEC surface inspection on the right side STA 259.5 circumferential
butt splice for any crack in accordance FIGURE 2.
NOTE: It is not required to accomplish PART 2 inspections for areas under existing external
repair doublers provided:
1. The installed repair was approved by the Manager, Aircraft Certification Office,
FAA or by a Boeing Company authorized representative who was authorized
by the FAA to make such findings, and the installed repair extends a minimum
of three fastener columns forward of the skin trim out.
OR
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
45 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 46

2. The installed repair was accomplished in accordance with Figure 49 of
737-100/200 SRM 53-30-03, or Repair 11 of 737-300 SRM 53-10-01, 737-400
SRM 53-10-01, 737-500 SRM 53-10-01.
If the repair does not meet either of the repair criteria given above, contact The
Boeing Company for instructions and do the instructions.
PART 3: COUNTERSUNK RIVET INSPECTIONS - LEFT AND RIGHT SIDES
1. Do a one-time detailed inspection for production countersunk rivet defects in both forward and aft
columns, left and right sides in accordance with FIGURE 7 and FIGURE 8.
NOTE: This inspection is not required at protruding head rivet locations.
NOTE: A rivet defect is any cracked or misshapen rivet manufactured head or installation not in
accordance with 737-100/200 SRM 51-30-02, 737-300 SRM 51-40-02, 737-400 SRM
51-40-02 & 737-500 SRM 51-40-02. This is only applicable to countersunk rivet locations,
areas at S-24L&R, S-22R and S-20R use lock-bolts or Hi-Loks.
NOTE: It is not required to accomplish PART 3 inspections for areas under existing external
repair doublers provided:
1. The installed repair was approved by the Manager, Aircraft Certification Office,
FAA or by a Boeing Company authorized representative who was authorized
by the FAA to make such findings, and the installed repair extends a minimum
of three fastener columns forward of the skin trim out.
OR
2. The installed repair was accomplished in accordance with Figure 49 of
737-100/200 SRM 53-30-03, or Repair 11 of 737-300 SRM 53-10-01, 737-400
SRM 53-10-01, 737-500 SRM 53-10-01.
If the repair does not meet either of the repair criteria given above, contact The
Boeing Company for instructions and do the instructions.
PART 4: SKIN REPAIR
1. If any crack is found on the left or right side, do the repair in accordance with Figure 49 of
737-100/200 SRM 53-30-03, or Repair 11 of 737-300 SRM 53-10-01, 737-400 SRM 53-10-01,
737-500 SRM 53-10-01 as applicable.
NOTE: S-19 is an SRM stay out zone for aero sensors for both left and right sides of the airplane.
PART 5: SKIN TRIM-OUT REPAIR
1. Do the repair in accordance with the trim out repair drawing number 692A1001.
PART 6: SKIN INSPECTIONS AT FORWARD FASTENER COLUMN- LEFT SIDE
1. Do a detailed inspection and a HFEC surface inspection of the skin for any crack around the
protruding fastener heads at the forward column in accordance with FIGURE 9.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
46 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 47

NOTE: It is not required to accomplish PART 6 inspections for areas under existing external
repair doublers provided:
1. The installed repair was approved by the Manager, Aircraft Certification Office,
FAA or by a Boeing Company authorized representative who was authorized
by the FAA to make such findings, and the installed repair extends a minimum
of three fastener columns forward of the skin trim out.
OR
2. The installed repair was accomplished in accordance with Figure 49 of
737-100/200 SRM 53-30-03, or Repair 11 of 737-300 SRM 53-10-01, 737-400
SRM 53-10-01, 737-500 SRM 53-10-01.
If the repair does not meet either of the repair criteria given above, contact The
Boeing Company for instructions and do the instructions.
PART 7: SKIN INSPECTIONS AT AFT FASTENER COLUMN - LEFT SIDE
1. Do a detailed inspection and a HFEC surface inspection of the skin for any crack at the aft fastener
column in accordance with FIGURE 10.
NOTE: It is not required to accomplish PART 7 inspections for areas under existing external
repair doublers provided:
1. The installed repair was approved by the Manager, Aircraft Certification Office,
FAA or by a Boeing Company authorized representative who was authorized
by the FAA to make such findings, and the installed repair extends a minimum
of three fastener columns forward of the skin trim out.
OR
2. The installed repair was accomplished in accordance with Figure 49 of
737-100/200 SRM 53-30-03, or Repair 11 of 737-300 SRM 53-10-01, 737-400
SRM 53-10-01, 737-500 SRM 53-10-01.
If the repair does not meet either of the repair criteria given above, contact The
Boeing Company for instructions and do the instructions.
PART 8: SKIN INSPECTIONS AT FORWARD FASTENER COLUMN- RIGHT SIDE
1. Do a detailed inspection and a HFEC surface inspection of the skin for any crack around the
protruding fastener heads at the forward column in accordance with FIGURE 11.
NOTE: It is not required to accomplish PART 8 inspections for areas under existing external
repair doublers provided:
1. The installed repair was approved by the Manager, Aircraft Certification Office,
FAA or by a Boeing Company authorized representative who was authorized
by the FAA to make such findings, and the installed repair extends a minimum
of three fastener columns forward of the skin trim out.
OR
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
47 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 48

2. The installed repair was accomplished in accordance with Figure 49 of
737-100/200 SRM 53-30-03, or Repair 11 of 737-300 SRM 53-10-01, 737-400
SRM 53-10-01, 737-500 SRM 53-10-01.
If the repair does not meet either of the repair criteria given above, contact The
Boeing Company for instructions and do the instructions.
PART 9: SKIN INSPECTIONS AT AFT FASTENER COLUMN - RIGHT SIDE
1. Do a detailed inspection and a HFEC surface inspection of the skin for any crack at the aft fastener
column in accordance with FIGURE 12.
NOTE: It is not required to accomplish PART 9 inspections for areas under existing external
repair doublers provided:
1. The installed repair was approved by the Manager, Aircraft Certification Office,
FAA or by a Boeing Company authorized representative who was authorized
by the FAA to make such findings, and the installed repair extends a minimum
of three fastener columns forward of the skin trim out.
OR
2. The installed repair was accomplished in accordance with Figure 49 of
737-100/200 SRM 53-30-03, or Repair 11 of 737-300 SRM 53-10-01, 737-400
SRM 53-10-01, 737-500 SRM 53-10-01.
If the repair does not meet either of the repair criteria given above, contact The
Boeing Company for instructions and do the instructions.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1: March 08, 2016
48 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 49 (OCR)

BOEING SERVICE BULLETIN 737-53A1267
ALERT  ALERT
This Figure applies only to: Group 1, Configuration 1.
STA 259.5
LAP JOINT
CREASE LINE
• S-17L
- S-19L
- S-24L
LAP JOINT
BUTT SPLICE
ACCESS DOOR  STA 259.5
- S-19L
LAP JOINT
LAP JOINT  S-24L
FWD C
SEE
SEE
FIGURE 1: LEFT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT
FASTENER COLUMNS - EXTERNAL SKIN INSPECTION
(SHEET 1 OF 5)
Original Issue: November 28, 2006
Revision 1 March 08, 2016  Export Controlled ECCN: 9E991 - BOEING  737-53A1267
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  49 of 102

### Page 50 (OCR)

BOEING SERVICE BULLETIN 737-53A1267
ALERT  ALERT
UPPER AFT
SKIN PANEL
CIRCUMFERENTIAL
UPPER FORWARD  BUTT SPLICE
SKIN PANEL  STA 259.5
•  0,0
- S-19L
BUTT
SPLICE  • LAP
JOINT
EXAMPLE  EXAMPLE
CRACKS  CRACKS
- S-20L
SPLICE STRAP
• SPLICE STRAP
EXAMPLE
CRACKS  EDGE OF LOWER
FORWARD
SKIN PANEL
LOWER FORWARD  FORWARD  FASTENER  AFT FASTENER  LOWER AFT
SKIN PANEL  COLUMN  COLUMN  SKIN PANEL
UP
INSPECTION AREA  LEFT SIDE  D38149
FIGURE 1: LEFT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT
FASTENER COLUMNS - EXTERNAL SKIN INSPECTION
(SHEET 2 OF 5)
Original Issue: November 28, 2006
Revision 1 March 08, 2016  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-53A1267
Work - See page 1 for details.  50 of 102

### Page 51 (OCR)

BOEING SERVICE BULLETIN 737-53A1267
ALERT  ALERT
CIRCUMFERENTIAL BUTT SPLICE
STA 259.5
•  S-21L
(REF)
12
- BUTT  SPLICE
SPLICE  - STRAP
S-22L
EXAMPLE
CRACKS  EXAMPLE
CRACKS
EDGE OF LOWER
FORWARD
SKIN PANEL
SPLICE STRAP
S-23L
EXAMPLE  CRACKS  SEE C
FOR
FORWARD  AIRPLANES
FASTENER•  WITH 3
COLUMN  FASTENER
COLUMNS
AFT
*FASTENER
COLUMN
LOWER FORWARD  S-24L
SKIN PANEL
LOWER AFT
SKIN PANEL
INSPECTION AREA
LOCK-BOLTS/HI-LOKS  FWD C  LEFT SIDE  LAP JOINT  D59752
FIGURE 1: LEFT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT
FASTENER COLUMNS - EXTERNAL SKIN INSPECTION
(SHEET 3 OF 5)
Original Issue: November 28, 2006
Revision 1 March 08, 2016  Export Controlled ECCN: 9E991 - BOEING  737-53A1267
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  51 of 102

### Page 52 (OCR)

BOEING SERVICE BULLETIN 737-53A1267
ALERT  ALERT
•
- S-23L
•
• S-24L
• 0
UP
INSPECTION AREA  FWDS
LOCK-BOLTS/HI-LOKS
FOR AIRPLANES WITH
3 FASTENER COLUMNS  2462867
FIGURE 1: LEFT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT
FASTENER COLUMNS - EXTERNAL SKIN INSPECTION
(SHEET 4 OF 5)
Original Issue: November 28, 2006
Revision 1 March 08, 2016  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-53A1267
Work - See page 1 for details.  52 of 102

### Page 53

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a) (b)--SkinInspect1
(a) (c)--SkinInspect2
(a) Inspect the skin around the countersunk fastener heads for any crack on the forward and aft fastener
columns between S-19L and S-24L at STA 259.5 circumferential butt splice.
(b) Do a detailed inspection.
(c) For all steel fastener locations:
– Do a HFEC surface inspection in accordance with 737 NDT Manual Part 6, 53-30-05 paragraph 4.
For all aluminum and titanium fastener locations:
– Do a HFEC surface inspection in accordance with 737 NDT Manual Part 6, 53-30-05 paragraph 4 or
paragraph 5.
FIGURE 1: LEFT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT
FASTENER COLUMNS - EXTERNAL SKIN INSPECTION
(SHEET 5 OF 5)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1 March 08, 2016
53 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 54 (OCR)

BOEING SERVICE BULLETIN 737-53A1267
ALERT  ALERT
This Figure applies only to: Group 1, Configuration 1.
STA 259.5
LAP JOINT
CREASE LINE
S-17R
S-19R-
S-24R -
LAP JOINT
BUTT SPLICE
STA 259.5  ACCESS DOOR
00
00
00
S-19R
00
00
000
LAP JOINT
0000  000000000  ...
S-24R  b00  100  → FWD  LAP JOINT
SEE
SEE  D38148
FIGURE 2: RIGHT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT
FASTENER COLUMNS - EXTERNAL SKIN INSPECTION
(SHEET 1 OF 4)
Original Issue: November 28, 2006
Revision 1 March 08, 2016  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-53A1267
Work - See page 1 for details.  54 of 102

### Page 55 (OCR)

BOEING SERVICE BULLETIN 737-53A1267
ALERT  ALERT
UPPER AFT  CIRCUMFERENTIAL  UPPER FORWARD
SKIN PANEL  BUTT SPLICE  SKIN PANEL
STA 259.5
S-19R -
LAP JOINT
BUTT SPLICE
EXAMPLE
CRACKS
S-20R
EXAMPLE
CRACKS
- SPLICE STRAP
EDGE OF LOWER
FORWARD
SKIN PANEL
AFT FASTENER  FORWARD  LOWER FORWARD
FASTENER COLUMN  SKIN PANEL
COLUMN
UP
INSPECTION AREA
LOCK-BOLTS/HI-LOKS  RIGHT SIDE  → FWD  D40360
FIGURE 2: RIGHT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT
FASTENER COLUMNS - EXTERNAL SKIN INSPECTION
(SHEET 2 OF 4)
Original Issue: November 28, 2006
Revision 1 March 08, 2016  Export Controlled ECCN: 9E991 - BOEING  737-53A1267
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  55 of 102

### Page 56 (OCR)

BOEING SERVICE BULLETIN 737-53A1267
ALERT  ALERT
CIRCUMFERENTIAL BUTT SPLICE
STA 259.5
S-21R
1X2
BUTT SPLICE
EXAMPLE
CRACK
S-22R
EXAMPLE
EXAMPLE  CRACKS
CRACKS
SPLICE STRAP
SPLICE
STRAP
S-23R -  EXAMPLE
• CRACK
EDGE OF LOWER  FORWARD
FORWARD  FASTENER COLUMN
SKIN PANEL
SUP
AFT
FASTENER  COLUMN  →FWD
EXAMPLE
LOWER AFT  CRACK
SKIN PANEL
S-24R  LOWER FORWARD
SKIN PANEL
INSPECTION AREA
LAP JOINT
LOCK-BOLTS/HI-LOKS  D60335
RIGHT SIDE
FIGURE 2: RIGHT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT
FASTENER COLUMNS - EXTERNAL SKIN INSPECTION
(SHEET 3 OF 4)
Original Issue: November 28, 2006
Revision 1 March 08, 2016  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-53A1267
Work - See page 1 for details.  56 of 102

### Page 57

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a) (b)--SkinInspect1
(a) (c)--SkinInspect2
(a) Inspect the skin around the fastener heads for any crack on the forward and aft fastener columns between
S-19R and S-24R at STA 259.5 circumferential butt splice.
(b) Do a detailed inspection.
(c) For all steel fastener locations:
– Do a HFEC surface inspection in accordance with 737 NDT Manual Part 6, 53-30-05 paragraph 4.
For all aluminum and titanium fastener locations:
– Do a HFEC surface inspection in accordance with 737 NDT Manual Part 6, 53-30-05 paragraph 4 or
paragraph 5.
FIGURE 2: RIGHT SIDE CIRCUMFERENTIAL BUTT SPLICE - FORWARD PANEL - FORWARD AND AFT
FASTENER COLUMNS - EXTERNAL SKIN INSPECTION
(SHEET 4 OF 4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1 March 08, 2016
57 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 58

FIGURE 3: THIS FIGURE IS DELETED.
(SHEET 1 OF 1)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1 March 08, 2016
58 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 59

FIGURE 4: THIS FIGURE IS DELETED.
(SHEET 1 OF 1)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1 March 08, 2016
59 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

### Page 60

FIGURE 5: THIS FIGURE IS DELETED.
(SHEET 1 OF 1)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 28, 2006
737-53A1267Revision 1 March 08, 2016
60 of 102
BOEING SERVICE BULLETIN 737-53A1267
ALERTALERT

The text continues at https://openairdocs.org/service-documents/boeing/737-53a1267/file/857859d86e93.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
