# Boeing Alert Service Bulletin 737-53A1318: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0857; AD 2012-23-14 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 737-53A1318](https://openairdocs.org/service-documents/boeing/737-53a1318.md)
- Title as filed: U.S. DOT/FAA - Service Information
- Pages: 58
- PDF: https://openairdocs.org/files/sha256/39/0c/390ce88de14bc6ee5b9436e77d3a4fa3bd61406da3dcecf7772371a3977a4586
- Page: https://openairdocs.org/service-documents/boeing/737-53a1318/file/390ce88de14b

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-53A1318
Original Issue: October 31, 2011
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Skin Cracking at the Aft Waste Water Drain Mast - Inspection and
Repair
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2011 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
1 of 58
2.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
2 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A. Effectivity ................................................ 9
1. Airplanes ............................................. 9
2. Spares Affected ........................................ 1 7
B. Concurrent Requirements ...................................... 1 7
C. Reason ................................................ 1 7
D. Description .............................................. 1 8
E. Compliance .............................................. 1 8
F. Approval ............................................... 2 0
G. Manpower .............................................. 2 0
H. Weight and Balance Changes .................................... 2 1
I. Electrical Load Data ......................................... 2 1
J. References .............................................. 2 2
1. Existing Data .......................................... 2 2
2. Data supplied with this Service Bulletin ............................ 2 2
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 2 2
K. Publications Affected ........................................ 2 2
L. Interchangeability and Intermixability of Parts ........................... 2 3
2. MATERIAL INFORMATION ........................................ 2 5
A. Material - Price and Availability ................................... 2 5
B. Industry Support Information .................................... 2 5
C. Parts Necessary For Each Airplane ................................. 2 5
1. Kits/Parts ............................................ 2 5
2. Parts and Materials Supplied by the Operator ........................ 2 5
3. Parts Modified and Reidentified ................................ 2 5
4. Parts Removed and Not Replaced .............................. 2 5
D. Parts Necessary to Change Spares ................................. 2 5
E. Special Tooling - Price and Availability ............................... 2 6
F. Special Tooling Necessary to do this Service Bulletin ....................... 2 6
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 7
A. GENERAL INFORMATION ..................................... 2 7
B. WORK INSTRUCTIONS ....................................... 2 8
FIGURE 1: GET ACCESS TO THE DRAIN MAST SUPPORT STRUCTURE [Group 1] ........ 3 1
FIGURE 2: DO A DETAILED INSPECTION OF THE CHANNEL AND THE FILLERS [Group 1] .... 3 4
FIGURE 3: INSPECT THE BONDING STRAP LOCATION [Group 1] .................. 3 6
FIGURE 4: MEASURE THE DIAMETER OF THE WASHERS UNDER THE DRAIN MAST BOLTS [Group
1 ]  ................................................ 3 8
FIGURE 5: MEASURE THE THICKNESS OF THE WASHERS UNDER THE DRAIN MAST BOLTS -
INSTRUMENT METHOD [Group 1] .............................. 4 0
FIGURE 6: MEASURE THE THICKNESS OF THE WASHERS UNDER THE DRAIN MAST BOLTS -
OPTIONAL TOOL METHOD [Group 1] ............................ 4 3
FIGURE 7: REMOVE THE DRAIN MAST [Group 1] ............................ 4 7
FIGURE 8: DO AN HFEC AND DETAILED INSPECTION OF THE SKIN, THE CHANNEL, AND THE FILLERS
[Group 1] ............................................ 4 9
FIGURE 9: INSTALL THE DRAIN MAST [Group 1] ............................ 5 2
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
3 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 4

FIGURE 10: OPTIONAL TOOL A AND TOOL B - MADE BY THE OPERATOR [Group 1] ........ 5 6
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
4 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 5

Commercial 
Airplanes
737
Service Bulletin
ALERT
SummaryNumber: 737-53A1318Original Issue: October 31, 2011
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Skin Cracking at the Aft Waste Water Drain Mast - Inspection and
Repair
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin is sent to ensure that the aft waste water drain mast is installed correctly. A drain mast that
is not installed correctly can cause cracks in the fuselage skin and the internal support structure. The skin cracks
can not be seen because they are hidden by the drain mast. If cracks in the fuselage skin are not detected and
repaired, they can grow past the frames that are adjacent to the drain mast and reach a critical length. Continued
operation of the airplane with undetected cracks could result in uncontrolled decompression of the airplane.
The drain mast is located between BS 986 - BS 1006 and between Stringer S-24L - S-25L.
In January 2010, one operator reported that the aft drain mast was found loose on a 737-400 airplane with
approximately 30,500 flight cycles. Further investigation revealed the fuselage skin and surrounding back up
structure were cracked. The crack common to the fuselage skin was hidden under the drain mast and was
approximately 8 inches long. The crack was probably caused by incorrect installation of the drain mast.
Accomplishment of the inspections in this service bulletin will make sure that the aft drain mast is installed
correctly and will make sure that cracks under the aft drain mast are detected and repaired before they reach
a critical length.
Boeing Service Related Problem (SRP) 737-SRP-53-0367 is related to this service bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
5 of 58

### Page 6

ACTION
Group 1:
On Group 1 airplanes, get access to the internal support structure for the aft waste water drain mast. Do an
internal detailed inspection of the drain mast support structure for cracks or corrosion. If cracks or corrosion are
found, then contact Boeing for a repair. Inspect the location of the drain mast ground strap. Inspect the washers
under the four bolts that hold the aft drain mast. If the ground strap is installed at an incorrect location, or if
incorrect washers are found, then remove the drain mast and do an HFEC inspection of the skin and support
structure for cracks. Do a detailed inspection of the skin under the drain mast and the support structure for
corrosion. If cracks or corrosion are found, then contact Boeing for a repair.
Group 2:
On Group 2 airplanes, contact Boeing to get instructions for the inspection and repair for this service bulletin,
737-53A1318 Original Issue, and do the work instructed by Boeing.
EFFECTIVITY
737-100/200/200C/300/400/500 Airplanes with the aft waste water drain mast installed. Refer to Paragraph
1.A.1., Airplanes for the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection, configuration changes, and/or repair procedures
given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower .
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
6 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 7 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
GET ACCESS TO THE INTERNAL SUPPORT STRUCTURE FOR THE AFT WASTE
WATER DRAIN MAST. DO AN INTERNAL DETAILED INSPECTION OF THE DRAIN
MAST SUPPORT STRUCTURE FOR CRACKS OR CORROSION. INSPECT THE
LOCATION OF THE DRAIN MAST GROUND STRAP. INSPECT THE WASHERS
UNDER THE DRAIN MAST BOLTS.
2076561
Original Issue: October 31, 2011
737-53A1318
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  7 of 58

### Page 8

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
8 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-53A1318
Original Issue: October 31, 2011
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Skin Cracking at the Aft Waste Water Drain Mast - Inspection and
Repair
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D6-19567 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP
737-200/200C/300/400/500 airplanes with an aft waste water drain
mast installed, excluding line numbers 1-291
-1
737-100/200 airplanes with an aft waste water drain mast installed,
line numbers 1-291
-2
Airplane Models:
737-100, 737-200, 737-200C, 737-300, 737-400, 737-500
GroupVariable Number
2PA001 - PA022
2PA099
2PG001 - PG004
2PG006 - PG019
2PG022 - PG025
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
9 of 58

### Page 10

GroupVariable Number
2PG027
2PG030
2PG032 - PG033
2PG038 - PG040
2PG044 - PG045
2PG051 - PG054
2PG057
2PG060 - PG063
2PG065 - PG072
2PG075
1PJ003 - PJ009
1PJ114 - PJ119
1PJ201 - PJ219
1PJ301 - PJ302
1PJ551 - PJ561
1PJ601 - PJ615
1PJ811
1PJ816 - PJ817
1PK201 - PK202
1PK281 - PK289
1PK351 - PK360
1PK391
1PK461 - PK469
1PK495
1PK501 - PK504
1PK611 - PK617
1PK621 - PK637
1PK671 - PK681
1PK731 - PK765
1PK771 - PK779
1PK801 - PK804
1PK819 - PK827
1PK830
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
10 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 11

GroupVariable Number
1PK871 - PK874
1PK901 - PK938
1PK971 - PK974
1PL002 - PL024
1PL081
1PL221
1PL401 - PL417
1PL451 - PL456
1PL471
1PL551 - PL562
1PL624 - PL626
1PL631 - PL632
1PL736 - PL747
1PL762 - PL770
1PL783 - PL788
1PM141 - PM142
1PM171
1PM251 - PM255
1PM281 - PM283
1PM381 - PM399
1PM401 - PM417
1PM541 - PM564
1PN001 - PN002
1PN021 - PN043
1PN081 - PN086
1PN101 - PN117
1PN451 - PN456
1PN471 - PN474
1PN501 - PN502
1PN521
1PP001 - PP054
1PP201 - PP205
1PP221
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
11 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 12

GroupVariable Number
1PP231 - PP243
1PP281 - PP286
1PP301 - PP305
1PP351 - PP353
1PP384
1PP391 - PP393
1PP401 - PP440
1PP471 - PP475
1PP501 - PP520
1PP671 - PP699
1PP701 - PP733
1PP801 - PP808
1PP821 - PP827
1PP831 - PP848
1PP851 - PP852
1PP861 - PP877
1PP904 - PP936
1PP946 - PP948
1PP951 - PP952
1PP961 - PP967
1PP981 - PP990
1PP993
1PQ001 - PQ016
1PQ026 - PQ041
1PQ051 - PQ092
1PQ101 - PQ199
1PQ201 - PQ202
1PQ241 - PQ243
1PQ251 - PQ267
1PQ281 - PQ299
1PQ301 - PQ307
1PQ331 - PQ332
1PQ341 - PQ348
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
12 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 13

GroupVariable Number
1PQ361 - PQ373
1PQ391 - PQ395
1PQ401 - PQ418
1PQ421
1PQ431 - PQ438
1PQ447 - PQ448
1PQ451
1PQ454
1PQ471 - PQ475
1PQ479 - PQ481
1PQ486 - PQ487
1PQ491 - PQ493
1PQ771 - PQ772
1PQ791 - PQ793
1PQ801 - PQ805
1PQ931 - PQ935
1PQ951
1PQ971 - PQ997
1PR001 - PR017
1PR021 - PR034
1PR041 - PR045
1PR061 - PR072
1PR077 - PR082
1PR091 - PR092
1PR096
1PR101
1PR121 - PR122
1PR131 - PR132
1PR141 - PR143
1PR161 - PR172
1PR181
1PS601 - PS631
1PS636 - PS638
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
13 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 14

GroupVariable Number
1PS641 - PS644
1PS669
1PS691 - PS692
1PS701 - PS706
1PS811
1PS836 - PS837
1PS841 - PS846
1PS851 - PS852
1PS856
1PS861 - PS863
1PS866 - PS868
1PS871 - PS874
1PS896 - PS897
1PS956 - PS957
1PS961 - PS963
1PS971 - PS978
1PT001 - PT015
1PT021 - PT031
1PT041 - PT064
1PT101 - PT105
1PT121 - PT138
1PT146 - PT148
1PT161 - PT170
1PT181 - PT188
1PT211 - PT220
1PT295
1PT331 - PT360
1PT381 - PT399
1PT401 - PT438
1PT501 - PT517
1PT561 - PT565
1PT581 - PT586
1PT611 - PT621
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
14 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 15

GroupVariable Number
1PT641 - PT644
1PT651 - PT656
1PT671 - PT672
1PT681 - PT685
1PT701 - PT703
1PT716 - PT717
1PT721 - PT725
1PT801 - PT834
1PT851 - PT854
1PT871 - PT886
1PT901 - PT930
1PT971 - PT973
1PT981 - PT985
1PT996
1PU301
1PV001 - PV055
1PV201 - PV209
1PV226 - PV229
1PV231 - PV237
1PV271 - PV272
1PV281 - PV287
1PV296
1PV301 - PV302
1PV351
1PV356 - PV357
1PW001 - PW054
1PW061 - PW068
1PW072
1PW086 - PW088
1PW091 - PW094
1PW101 - PW102
1PW106
1PW111 - PW120
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
15 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 16

GroupVariable Number
1PW156 - PW157
1PW161 - PW171
1PW201 - PW252
1PW261 - PW268
1PW271 - PW276
1PW278
1PW281 - PW293
1PW296
1PW301 - PW327
1PW401 - PW408
1PW411 - PW418
1PW421 - PW424
1PW431 - PW435
1PW441 - PW450
1PW461 - PW467
1PW501 - PW504
1PW511 - PW522
1PW524 - PW550
1PW556 - PW557
1PW561 - PW564
1PW571 - PW576
1PW591 - PW596
1PW611 - PW622
1PW631 - PW637
1PW661 - PW662
1PW681 - PW683
1PW701 - PW702
1PW711 - PW717
1PW741 - PW742
1PW761
1PW771
1PW831
1PW851 - PW856
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
16 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 17

GroupVariable Number
1PY056 - PY057
1PY101 - PY103
1PY111 - PY113
1PY151 - PY154
1PY201
1PY231
1PY461 - PY463
1PY721
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
This service bulletin is sent to ensure that the aft waste water drain mast is installed correctly. A drain
mast that is not installed correctly can cause cracks in the fuselage skin and the internal support
structure. The skin cracks can not be seen because they are hidden by the drain mast. If cracks in the
fuselage skin are not detected and repaired, they can grow past the frames that are adjacent to the
drain mast and reach a critical length. Continued operation of the airplane with undetected cracks could
result in uncontrolled decompression of the airplane.
The drain mast is located between BS 986 - BS 1006 and between Stringer S-24L - S-25L.
In January 2010, one operator reported that the aft drain mast was found loose on a 737-400 airplane
with approximately 30,500 flight cycles. Further investigation revealed the fuselage skin and surrounding
back up structure were cracked. The crack common to the fuselage skin was hidden under the drain
mast and was approximately 8 inches long. The crack was probably caused by incorrect installation
of the drain mast.
Accomplishment of the inspections in this service bulletin will make sure that the aft drain mast is
installed correctly and will make sure that cracks under the aft drain mast are detected and repaired
before they reach a critical length.
Boeing Service Related Problem (SRP) 737-SRP-53-0367 is related to this service bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
17 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 18

D. Description
Group 1:
On Group 1 airplanes, get access to the internal support structure for the aft waste water drain mast.
Do an internal detailed inspection of the drain mast support structure for cracks or corrosion. If cracks
or corrosion are found, then contact Boeing for a repair. Inspect the location of the drain mast ground
strap. Inspect the washers under the four bolts that hold the aft drain mast. If the ground strap is installed
at an incorrect location, or if incorrect washers are found, then remove the drain mast and do an HFEC
inspection of the skin and support structure for cracks. Do a detailed inspection of the skin under the
drain mast and the support structure for corrosion. If cracks or corrosion are found, then contact Boeing
for a repair.
Group 2:
On Group 2 airplanes, contact Boeing to get instructions for the inspection and repair for this service
bulletin, 737-53A1318 Original Issue, and do the work instructed by Boeing.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
2-20737-200, 737-200C
Group 1:
Affected Maintenance Zones
ZoneModel
220737-300, 737-400, 737-500
Group 2:
Affected Maintenance Zones
ZoneModel
2-20737-100, 737-200
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
18 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 19

Group 1:
Table 1: Aft Waste Water Drain Mast Inspection and Repair on Group 1 Airplanes
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later )
ActionCondition
NoneWithin 4,500
flight cycles af-
ter the original
issue date of
this Service Bul-
letin.
Before 25,000
total airplane
flight cycles.
Do a detailed inspection of
the channel and the fillers
for cracks and signs of corro-
sion in accordance with Ac-
complishment Instruction
3.B.1.c.
737-200/200C/300/400/500
airplanes with an aft waste
water drain mast installed,
excluding line numbers 1-
291
NoneWithin 4,500
flight cycles af-
ter the original
issue date of
this Service Bul-
letin.
Before 25,000
total airplane
flight cycles.
Inspect the bonding strap for
the correct location in accor-
dance with Accomplishment
Instruction 3.B.1.d. If an in-
correct installation is found,
then remove the drain mast
and do an HFEC and de-
tailed inspection of skin,
channel, and fillers for
cracks and signs of corro-
sion in accordance with Ac-
complishment Instruction
3.B.1.d
NoneWithin 4,500
flight cycles af-
ter the original
issue date of
this Service Bul-
letin.
Before 25,000
total airplane
flight cycles.
Measure the diameter of the
washers under the drain
mast bolts in accordance
with Accomplishment Instruc-
tion 3.B.1.e. If an incorrect
installation is found, then re-
move the drain mast and do
an HFEC and detailed in-
spection of skin, channel,
and fillers for cracks and
signs of corrosion in accor-
dance with Accomplishment
Instruction 3.B.1.e.
NoneWithin 4,500
flight cycles af-
ter the original
issue date of
this Service Bul-
letin.
Before 25,000
total airplane
flight cycles.
Measure the thickness of the
washers under the drain
mast bolts in accordance
with Accomplishment Instruc-
tion 3.B.1.f. If an incorrect
installation is found, then re-
move the drain mast and do
an HFEC and detailed in-
spection of skin, channel,
and fillers for cracks and
signs of corrosion in accor-
dance with Accomplishment
Instruction 3.B.1.f.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
19 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 20

Group 1:
Table 1: Aft Waste Water Drain Mast Inspection and Repair on Group 1 Airplanes
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later )
ActionCondition
NoneBefore further flightContact Boeing to get instruc-
tions for the repair for this
service bulletin, 737-
53A1318 Original Issue, and
do the work instructed by
Boeing.
A crack or sign of corrosion
is found in the the skin, the
channel, or the fillers.
Group 2:
On Group 2 airplanes, contact Boeing to get instructions for the inspection and repair for this service
bulletin, 737-53A1318 Original Issue, and do the work instructed by Boeing before further flight.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this service bulletin for each
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with
operator task hour data if necessary. The estimate does not include lost time. These are some examples
of lost time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access (Open
Circuit Breaker)
0.550.551FIGURE 1 - Open
Access
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
20 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 21

Elapsed HoursTask HoursNumber of PersonsTask
1.001.001FIGURE 2 - Detailed
Inspection
0.100.101FIGURE 3 - Inspect
Bonding Strap
0.150.151FIGURE 4 - Inspect
Washer Diameter
0.750.751FIGURE 5 - Inspect
Washer Thickness,
Instrument Method
0.200.201FIGURE 6 - Inspect
Washer Thickness,
Tool Method
0.750.751FIGURE 7 - Remove
Drain Mast (a)
2.002.001FIGURE 8 - HFEC
and Detailed Inspec-
tion (a)
1.501.501FIGURE 9 - Install
Drain Mast (a)
(b)(b)(b)FIGURE 10 - Make
Tool
0.800.801Close Access
3.603.60TOTAL FOR EACH AIRPLANE
(If Measuring Thickness of Washers by
Instrument Method) (a)
3.053.05TOTAL FOR EACH AIRPLANE
(If Measuring Thickness of Washers by
Optional Tool Method) (a)
(a) The totals given do not include estimates for Figures 7, 8 and 9. If it is neces-
sary to do Figures 7, 8 and 9, then you must add estimates for Figures 7, 8,
and 9 to the totals given. Paragraph 3.B. tells you when it is necessary to do
Figures 7, 8 and 9.
(b) No manpower estimate is given. Time to make tools is considered lost time
in Boeing manpower estimates.
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not applicable.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
21 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 22

J. References
1. Existing Data
a. Service Related Problem (SRP) 737-SRP-53-0367
b. Boeing Service Letter 737-SL-51-042
c. Service Bulletin Index D6-19567
d. Standard Overhaul Practices Manual (SOPM) 20-11-03, 20-41-02, 20-41-05, 20-43-03,
20-50-01, 20-50-19
e. Standard Wiring Practices Manual (SWPM) 20-10-11, 20-10-12, 20-10-19, 20-20-00, 20-20-10
f. 737 Non-Destructive Testing (NDT) Manual Part 6, 51-00-00, Figure 4, Part 6, 51-00-00,
Figure 16, Part 6, 51-00-00, Figure 23
g. 737-100/200 Aircraft Maintenance Manual (AMM) 30-71-0, 51-31-0
h. 737-300/400/500 Aircraft Maintenance Manual (AMM) 30-71-00, 51-31-00
2. Data supplied with this Service Bulletin
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin
TitleDrawing Number
Aft Waste Water Drain Mast Support Installation65-55843
Aft Waste Water Drain Mast Installation65-55765
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
38-31737 Aircraft Maintenance Manual
38-31737 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS but no new DTIs are necessary.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
22 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 23

L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
23 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 24

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
24 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT
BLANK PAGE

### Page 25

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane. As an alternative, operators can purchase the parts from Boeing Spares. This service bulletin
does not show the Boeing price and supply data.
B. Industry Support Information
Boeing warranty remedies are not available for the inspection, configuration changes, and/or repair
procedures given in this service bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
NotesNameQTYPart Number / Specification
(a)Bolt4BACB30LM4-4
(a)Washer4NAS1149D0416H
(a)Seal Washer4NAS1523C4R
(a) (b)Chemical Conversion Coating5 OzType 2, Class A
(a) (c)Primer5 OzBMS 10-11, Type I
(a) (c)Sealant10 OzBMS 5-95, Type 1, Class B-1/2 or
Class B-2
(c)Corrosion Inhibiting Compound15 OzBMS 3-29
(a) This part or material is necessary only if you do Figure 9. Paragraph 3.B. tells you when it is necessary
to do Figure 9.
(b) Refer to SOPM 20-43-03 for material sources.
(c) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
3. Parts Modified and Reidentified
None
4. Parts Removed and Not Replaced
None
D. Parts Necessary to Change Spares
None
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
25 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 26

E. Special Tooling - Price and Availability
The operator can supply the tools shown in Paragraph 2.F., Special Tooling Necessary to do this
Service Bulletin. Tool price and supply data are not given.
F. Special Tooling Necessary to do this Service Bulletin
The operator can make optional Tool A and Tool B in accordance with Figure 10. Use Tool A and Tool
B as an optional method of measuring the thickness of the washers under the drain mast bolts in
accordance with Figure 6. The operator can do the requirements of this service bulletin without Tool
A and Tool B by measuring the thickness of the washers under the drain mast bolts in accordance with
Figure 5.
Maintenance and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary.
Examine operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
26 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 27

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
4. Use the approved fastener and process material substitutions in accordance with
SRM Chapter 51.
5. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures,
and SWPM 20-10-19 for the wire separation requirements, as accepted procedures.
6. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
7. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
8. Boeing Service Letter 737-SL-51-042, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
9. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
27 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 28

10. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
11. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
12. This service bulletin includes functional test procedures for the systems changed by
this service bulletin. More functional tests can possibly be necessary in accordance
with standard maintenance practices because of interruption to other airplane systems.
B. WORK INSTRUCTIONS
1. Group 1:
Work Instructions for Group 1 airplanes.
a. Do these Work Instructions at the times given in Paragraph 1.E Compliance.
b. Get access to the work area.
(1) Open the DRAIN MAST HEATER circuit breakers on the P18 panel. Attach
DO-NOT-CLOSE tags.
(2) Get access to the aft waste water drain mast support structure in accordance with Figure
1.
c. Do a detailed inspection of the channel and the fillers for cracks and signs of corrosion adjacent
to the drain mast bolts in accordance with Figure 2.
(1) If there is no crack and no sign of corrosion, then do Paragraph 3.B.1.d.
(2) If there is a crack or sign of corrosion, then contact Boeing for a repair. Refer to Boeing
Service Letter 737-SL-51-042 as an accepted procedure.
d. Inspect the bonding strap for the correct location in accordance with Figure 3.
(1) If the bonding strap is installed at the location in accordance with Figure 3, then do
Paragraph 3.B.1.e.
(2) If the bonding strap is not installed at the location in accordance with Figure 3, then you
you have an incorrect installation. Remove the drain mast in accordance with Figure 7.
Do an HFEC inspection of the skin, the channel, and the fillers for cracks that start at the
drain mast bolt holes, in accordance with Figure 8. Do a detailed inspection of the skin,
the channel, and the fillers for signs of corrosion adjacent to the drain mast bolt holes, in
accordance with Figure 8.
(3) If there is no crack and no sign of corrosion, then install the drain mast in accordance
with Figure 9 and do Paragraph 3.B.1.g.
(4) If there is a crack or sign of corrosion, then contact Boeing for a repair. Refer to Boeing
Service Letter 737-SL-51-042 as an accepted procedure.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
28 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 29

e. Measure the diameter of the washers under the drain mast bolts in accordance with Figure
4.
(1) If the diameter of all the washers measures within the range in accordance with Figure
4, then do Paragraph 3.B.1.f.
(2) If the diameter of any washer does not measure within the range in accordance with
Figure 4, or if no washers are installed, then you have an incorrect installation. Remove
the drain mast in accordance with Figure 7. Do an HFEC inspection of the skin, the
channel, and the fillers for cracks that start at the drain mast bolt holes, in accordance
with Figure 8. Do a detailed inspection of the skin, the channel, and the fillers for signs
of corrosion adjacent to the drain mast bolt holes, in accordance with Figure 8.
(3) If there is no crack and no sign of corrosion, then install the drain mast in accordance
with Figure 9 and do Paragraph 3.B.1.g.
(4) If there is a crack or sign of corrosion, then contact Boeing for a repair. Refer to Boeing
Service Letter 737-SL-51-042 as an accepted procedure.
f. Measure the thickness of the washers under the drain mast bolts in accordance with Figure
5. As an option, you can make Tool A and Tool B in accordance with Figure 10, and measure
the thickness of the washers under the drain mast bolts in accordance with Figure 6.
(1) If the thickness of the washers measures within range in accordance with Figure 5 or
Figure 6, then do Paragraph 3.B.1.g.
(2) If the thickness of the washers does not measure within the range in accordance with
Figure 5 or Figure 6, then you have an incorrect installation. Remove the drain mast in
accordance with Figure 7. Do an HFEC inspection of the skin, the channel, and the fillers
for cracks that start at the drain mast bolt holes, in accordance with Figure 8. Do a detailed
inspection of the skin, the channel, and the fillers for signs of corrosion adjacent to the
drain mast bolt holes, in accordance with Figure 8.
(3) If there is no crack and no sign of corrosion, then install the drain mast in accordance
with Figure 9 and do Paragraph 3.B.1.g.
(4) If there is a crack or sign of corrosion, then contact Boeing for a repair. Refer to Boeing
Service Letter 737-SL-51-042 as an accepted procedure.
g. Close access to the work area.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
29 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 30

(1) Apply Corrosion Inhibiting Compound BMS 3-29 to the area where corrosion inhibiting
compound was removed for inspection. Refer to SOPM 20-41-05 as an accepted
procedure.
(2) Install the kept insulation that was removed for access.
(3) Install the kept aft cargo compartment access panel that was removed for access.
(4) Remove the DO-NOT-CLOSE tags and close the DRAIN MAST HEATER circuit breakers
on the P18 panel.
(5) Return the airplane to a serviceable condition.
2. Group 2:
Work Instructions for Group 2 airplanes.
a. Do these Work Instructions at the times given in Paragraph 1.E Compliance.
b. On Group 2 airplanes, contact Boeing to get instructions for the inspection and repair for this
service bulletin, 737-53A1318 Original Issue, and do the work instructed by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
30 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 31 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
This Figure applies only to: Group 1.
FWD
AFT CARGO COMPARTMENT  2076572
FIGURE 1: GET ACCESS TO THE DRAIN MAST SUPPORT STRUCTURE
(SHEET 1 OF 3)
Original Issue: October 31, 2011
BOEING PROPRIETARY -  737-53A1318
Copyright © Unpublished Work - See page 1 for details.  31 of 58

### Page 32 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
FWD
DRAIN MAST
BOLT
2) INSULATION  INSULATION 2  S-24L
MAST BOLT  DRAIN  BONDING STRAP  2076737
VIEW OF DRAIN MAST SUPPORT STRUCTURE
FIGURE 1: GET ACCESS TO THE DRAIN MAST SUPPORT STRUCTURE
(SHEET 2 OF 3)
Original Issue: October 31, 2011
737-53A1318
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  32 of 58

### Page 33

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATANAMETASKSTEP
Remove and keep the access panel from the aft bulkhead in
the aft cargo compartment.
Access PanelRemove /
Keep
1
Remove the insulation from the drain mast support structure.
Keep the insulation. Make sure that you can see the four
drain mast bolts. Make sure you can see the bonding strap.
(a)
InsulationRemove /
Keep
2
(a) The drain mast support structure is located 4.5 feet behind the bulkhead between BS 986 - BS 1006 and
between Stringer S-24L - S-25L.
FIGURE 1: GET ACCESS TO THE DRAIN MAST SUPPORT STRUCTURE
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
33 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 34 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
This Figure applies only to: Group 1.
DRAIN MAST  FORWARD
DRAIN MAST
BOLT
S-24L
DRAIN  BONDING STRAP
MAST BOLT
DRAIN
SKIN  MAST BOLT  CRACK  (TYPICAL)  2) (4 PLACES)  FILLER
CHANNEL 1
FORWARD
DRAIN
WD  AFT DRAIN  CRACK  (TYPICAL)  MAST BOLT
MAST
VIEW OF DRAIN MAST SUPPORT STRUCTURE  2086602
(SOME STRUCTURE NOT SHOWN FOR CLARITY)
FIGURE 2: DO A DETAILED INSPECTION OF THE CHANNEL AND THE FILLERS
(SHEET 1 OF 2)
Original Issue: October 31, 2011
BOEING PROPRIETARY -  737-53A1318
Copyright © Unpublished Work - See page 1 for details.  34 of 58

### Page 35

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATANAMETASKSTEP
Clean the channel and the fillers for inspection. The inspection
area must be clean of dirt, grease, corrosion inhibiting com-
pound, or other substances that prevent a detailed inspection
of the structure. Make sure you only use approved compound
removal tools. Refer to 737-100/200 AMM 51-31-0 or 737-
300/400/500 AMM 51-31-00 as an accepted procedure.
Channel / FillerClean1
Do an internal detailed inspection of the channel and the
fillers for cracks and signs of corrosion adjacent to the drain
mast bolts.
Channel / FillerInspect2
FIGURE 2: DO A DETAILED INSPECTION OF THE CHANNEL AND THE FILLERS
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
35 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 36 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
This Figure applies only to: Group 1.
DRAIN MAST  FORWARD
DRAIN MAST
BOLT
S-24L
DRAIN  MAST BOLT  BONDING STRAP
DRAIN
MAST BOLT
1) BONDING STRAP
CHANNEL
FORWARD
1) DRAIN
MAST BOLT
AFT DRAIN
MAST
VIEW OF DRAIN MAST SUPPORT STRUCTURE  2076793
(SOME STRUCTURE NOT SHOWN FOR CLARITY)
FIGURE 3: INSPECT THE BONDING STRAP LOCATION
(SHEET 1 OF 2)
Original Issue: October 31, 2011
737-53A1318
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  36 of 58

### Page 37

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATANAMETASKSTEP
Make sure that the bonding strap is installed on the forward
drain mast bolt. (a)
Bonding StrapInspect1
(a) If the bonding strap is installed on a drain mast bolt that is not the forward drain mast bolt, then you have
an incorrect installation.
FIGURE 3: INSPECT THE BONDING STRAP LOCATION
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
37 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 38 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
This Figure applies only to: Group 1.
FORWARD DRAIN  •  S-24L
MAST BOLT
BONDING STRAP
DRAIN
MAST BOLT
LESS THAN
0.55 INCH
LESS THAN
0.55 INCH
DIAMETER
DRAIN MAST BOLT  FORWARD DRAIN MAST BOLT
B  2077095
FIGURE 4: MEASURE THE DIAMETER OF THE WASHERS UNDER THE DRAIN MAST BOLTS
(SHEET 1 OF 2)
Original Issue: October 31, 2011
737-53A1318
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  38 of 58

### Page 39

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAQTYNAMETASKSTEP
Make sure that the diameter of all the wash-
ers under the drain mast bolt measures less
than 0.55 inch. (a) (b) (c)
4 Bolt Loca-
tions
Diameter of WashersMeasure1
(a) One or two washers may be installed.
(b) If the diameter of any washer measures larger than 0.55 inch, then you have an incorrect installation.
(c) If no washers are installed, then you have an incorrect installation.
FIGURE 4: MEASURE THE DIAMETER OF THE WASHERS UNDER THE DRAIN MAST BOLTS
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
39 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 40 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
This Figure applies only to: Group 1.
DRAIN
MAST BOLT
FORWARD DRAIN
MAST BOLT
S-24L
BONDING STRAP
DRAIN
MAST BOLT
BONDING STRAP
FORWARD
DRAIN MAST
BOLT
SKIN
FWD
AFT DRAIN MAST  A-A  2077160
FIGURE 5: MEASURE THE THICKNESS OF THE WASHERS UNDER THE DRAIN MAST BOLTS -
INSTRUMENT METHOD
(SHEET 1 OF 3)
Original Issue: October 31, 2011
BOEING PROPRIETARY -  737-53A1318
Copyright © Unpublished Work - See page 1 for details.  40 of 58

### Page 41 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
WASHER
SEAL WASHER  / BOLT  DRAIN MAST
10.07  0.05
FILLER
CHANNEL
SKIN  DRAIN MAST
RAIN MAST BOLT WITHOU
THIS SNOO
WASHER,
FORWARD DRAIN
SEAL WASHER  / MAST BOLT
1.10
2 0.08
BONDING
STRAP
CHANNEL
FILLER
SKIN  DRAIN MAST
FORWARD DRAIN MAST BOLT
WITH THE BONDING STRAP
2077577
FIGURE 5: MEASURE THE THICKNESS OF THE WASHERS UNDER THE DRAIN MAST BOLTS -
INSTRUMENT METHOD
(SHEET 2 OF 3)
Original Issue: October 31, 2011
BOEING PROPRIETARY -  737-53A1318
Copyright © Unpublished Work - See page 1 for details.  41 of 58

### Page 42

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAQTYNAMETASKSTEP
Make sure that the thickness of the washers
under the drain mast bolt measures 0.057 -
0.074 inch. (a) (b) (c)
3 Bolt Loca-
tions
Thickness of WashersMeasure1
Make sure that the thickness of the washers
and the bonding strap lug under the drain
mast bolt measures 0.086 - 0.109 inch. (a)
(b) (c)
1 Bolt LocationThickness of Washers
and Bonding Strap Lug
Measure2
(a) Measure from the upper surface of the filler to the upper surface of the top washer. Use an instrument
that is capable of measuring the geometric step to an accuracy of +/- 0.001 inch.
(b) One or two washers may be installed. If one washer is installed, then the thickness must measure within
the minimum and maximum range given.
(c) If the thickness of the washers or the thickness of the washers and bonding strap do not measure within
the minimum and maximum range given, then you have an incorrect installation.
FIGURE 5: MEASURE THE THICKNESS OF THE WASHERS UNDER THE DRAIN MAST BOLTS -
INSTRUMENT METHOD
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
42 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 43 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
This Figure applies only to: Group 1.
FORWARD DRAIN  S-24L
MAST BOLT
BONDING STRAP
DRAIN
MAST BOLT
BONDING
STRAP
TOOL A  TOOL B
(MAXIMUM  (MAXIMUM
MEASUREMENT •  MEASUREMENT
SHOWN,  SHOWN,
MINIMUM  MINIMUM
MEASUREMENT  MEASUREMENT
SIMILAR)  SIMILAR)
B
DRAIN MAST BOLT  FORWARD DRAIN MAST BOLT
2086604
FIGURE 6: MEASURE THE THICKNESS OF THE WASHERS UNDER THE DRAIN MAST BOLTS - OPTIONAL
TOOL METHOD
(SHEET 1 OF 4)
Original Issue: October 31, 2011
737-53A1318
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  43 of 58

### Page 44 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
WASHER  DRAIN MAST
BOLT
SEAL WASHER
TOOL A
MAXIMUM
MEASUREMENT
FILLER  (GO GAUGE)
CHANNEL
SKIN
DRAIN MAST
DRAIN MAST BOLT WITHOUT A BONDING STRAP
TOOL A MAXIMUM MEASUREMENT (GO GAUGE) SHOWN
A-A
WASHER  DRAIN MAST
BOLT
SEAL WASHER
TOOL A
MINIMUM
MEASUREMENT
FILLER  (NO-GO GAUGE)
CHANNEL
SKIN  • DRAIN MAST
DRAIN MAST BOLT WITHOUT A BONDING STRAP
TOOL A MINIMUM MEASUREMENT (NO-GO GAUGE) SHOWN  A-A  2086605
FIGURE 6: MEASURE THE THICKNESS OF THE WASHERS UNDER THE DRAIN MAST BOLTS - OPTIONAL
TOOL METHOD
(SHEET 2 OF 4)
Original Issue: October 31, 2011
BOEING PROPRIETARY -  737-53A1318
Copyright © Unpublished Work - See page 1 for details.  44 of 58

### Page 45 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
WASHER,  DRAIN MAST  BOLT
SEAL WASHER
BONDING  TOOL B
STRAP  MEASUREMENT  MAXIMUM
LUG  (GO GAUGE)
FILLER -
CHANNEL'
SKIN  DRAIN MAST
FORWARD DRAIN MAST BOLT WITH THE BONDING STRAP
TOOL B MAXIMUM MEASUREMENT (GO GAUGE) SHOWN
B-B
WASHER  DRAIN MAST
BOLT
SEAL WASHER
BONDING  TOOL B
STRAP  MINIMUM
LUG  MEASUREMENT
(NO-GO GAUGE)
FILLER
CHANNEL
SKIN  DRAIN MAST
FORWARD DRAIN MAST BOLT WITH THE BONDING STRAP
TOOL B MINIMUM MEASUREMENT (NO-GO GAUGE) SHOWN  B-B  2086606
FIGURE 6: MEASURE THE THICKNESS OF THE WASHERS UNDER THE DRAIN MAST BOLTS - OPTIONAL
TOOL METHOD
(SHEET 3 OF 4)
Original Issue: October 31, 2011
737-53A1318
Copyright © Unpublished Work - See page 1 for details.  BOEING PROPRIETARY -  45 of 58

### Page 46

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAQTYNAMETASKSTEP
Make sure that the thickness of the washers under
the drain mast bolt is within the maximum limit of
0.074 inch. Do the measurement with the TOOL A
MAXIMUM MEASUREMENT (GO GAUGE). If Tool
A slides over the top surface of the washer, then the
thickness of the washers is within the maximum
limit. (a) (b) (c)
3 Bolt Loca-
tions
Thickness of
Washers Com-
pared to Maxi-
mum Limit
Measure1
Make sure that the thickness of the washers under
the drain mast bolt is within the minimum limit of
0.057 inch. Do the measurement with the TOOL A
MINIMUM MEASUREMENT (NO-GO GAUGE). If
Tool A does not slide over the top surface of the
washer, then the thickness of the washers is within
the minimum limit. (a) (b) (d)
3 Bolt Loca-
tions
Thickness of
Washers Com-
pared to Minimum
Limit
Measure2
Make sure that the thickness of the washers and
the bonding strap lug under the drain mast bolt is
within the maximum limit of 0.109 inch. Do the
measurement with the TOOL B MAXIMUM MEA-
SUREMENT (GO GAUGE). If the Tool B slides over
the top surface of the washer, then the thickness of
the washers is within the maximum limit. (a) (b) (c)
1 Bolt LocationThickness of
Washers and
Bonding Strap
Lug Compared to
Maximum Limit
Measure3
Make sure that the thickness of the washers and
the bonding strap under the drain mast bolt is within
the minimum limit of 0.086 inch. Do the measure-
ment with the TOOL B MINIMUM MEASUREMENT
(NO-GO GAUGE). If Tool B does not slide over the
top surface of the washer, then the thickness of the
washers is within the minimum limit. (a) (b) (d)
1 Bolt LocationThickness of
Washers and
Bonding Strap
Lug Compared to
Minimum Limit
Measure4
(a) Measure from the upper surface of the filler to the upper surface of the top washer. Put the end of the tool
flat on the filler. Slide the tool to a location where the washer protrudes past the bolt head. If necessary,
use 15X magnification to visually verify if the tool does, or does not, slide over the washers.
(b) One or two washers may be installed. If one washer is installed, then the thickness must measure within
the minimum and maximum range given.
(c) If the MAXIMUM MEASUREMENT (GO GAUGE) end of the tool does not slide over the top surface of
the washer, then you have an incorrect installation.
(d) If the MINIMUM MEASUREMENT (NO-GO GAUGE) end of the tool does slide over the top surface of the
washer, then you have an incorrect installation.
FIGURE 6: MEASURE THE THICKNESS OF THE WASHERS UNDER THE DRAIN MAST BOLTS - OPTIONAL
TOOL METHOD
(SHEET 4 OF 4)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
46 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 47 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
This Figure applies only to: Group 1.
DRAIN
MAST BOLT  FORWARD DRAIN
MAST BOLT
S-24L
DRAIN  BONDING STRAP
MAST WIRE
DRAIN MAST
WIRE
DRAIN MAST BOLT
) BONDING STRAP
FORWARD
DRAIN MAST
BOLT
5) SKIN
DRAIN MAST
TUBE
AFT DRAIN MAST 45)  A-A  FWD  2077580
FIGURE 7: REMOVE THE DRAIN MAST
(SHEET 1 OF 2)
Original Issue: October 31, 2011
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  39 10 L₺

### Page 48

CAUTION: WHEN YOU REMOVE THE FASTENERS THAT HOLD THE DRAIN MAST, ASK ANOTHER
PERSON TO HOLD THE DRAIN MAST FROM THE OUTSIDE OF THE AIRPLANE. IF THE
DRAIN MAST FALLS, DAMAGE CAN OCCUR.
CAUTION: OBEY THE INSTRUCTIONS IN THE STEPS TO REMOVE THE SEALANT FROM THE SKIN. IF
YOU DO NOT OBEY THE INSTRUCTIONS, DAMAGE TO THE AIRPLANE SURFACE CAN
OCCUR.
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATASPECNAMETASKSTEP
Loosen the clamp and disconnect the drain mast
tube. Make sure that you do not damage the drain
mast tube when you disconnect it. Keep the drain
mast tube and clamp.
-Drain Mast
Tube / Clamp
Disconnect
/ Keep
1
Disconnect the drain mast electrical wires at the
splices. Keep the drain mast wires. (a)
-Drain Mast
Wires
Disconnect
/ Keep
2
Remove and discard the drain mast bolts and wash-
ers. Make sure that another person holds the drain
mast from the outside of the airplane so that the drain
mast does not fall. Make sure you do not damage
the bonding strap when you remove the bolt. Keep
the bonding strap. (a)
-Bolts / Wash-
ers
Remove /
Discard
3
Remove and keep the drain mast.-Drain MastRemove /
Keep
4
Remove the aerodynamic smoother and faying sur-
face sealant from the skin and the drain mast. Make
sure you do not damage the skin when you remove
the sealant. Make sure you only use approved
sealant removal tools. Refer to 737-100/200 AMM
51-31-0 or 737-300/400/500 AMM 51-31-00 as an
accepted procedure.
737-100/200 AMM
51-31-0 or 737-
300/400/500 AMM
51-31-00
SealantRemove5
(a) The drain mast wires and the bonding strap are connected to the drain mast. They are removed from the
airplane when the drain mast is removed.
FIGURE 7: REMOVE THE DRAIN MAST
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
48 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 49 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
This Figure applies only to: Group 1.
AFT DRAIN MAST
) SKIN CRACK  3) SKIN
STA  (TYPICAL)
986.50
S-24L
S-25L
AFT DRAIN MAS
FWD  BOLT HOLI
VIEW OF SKIN WITH THE AFT  DRAIN MAST REMOVED  2077871
A-A
FIGURE 8: DO AN HFEC AND DETAILED INSPECTION OF THE SKIN, THE CHANNEL, AND THE FILLERS
(SHEET 1 OF 3)
Original Issue: October 31, 2011
BOEING PROPRIETARY -  737-53A1318
Copyright © Unpublished Work - See page 1 for details.  49 of 58

### Page 50 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
S-24L
CRACK IN CHANNEL  AND FILLER  5) (4 PLACES)  FILLER
CHANNEL  (TYPICAL)
FWD
VIEW OF DRAIN MAST SUPPORT STRUCTURE  2078120
(SOME STRUCTURE NOT SHOWN FOR CLARITY)
FIGURE 8: DO AN HFEC AND DETAILED INSPECTION OF THE SKIN, THE CHANNEL, AND THE FILLERS
(SHEET 2 OF 3)
Original Issue: October 31, 2011
BOEING PROPRIETARY -  737-53A1318
Copyright © Unpublished Work - See page 1 for details.  50 of 58

### Page 51

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATASPECQTYNAMETASKSTEP
Do an open hole HFEC inspection of the
drain mast bolt holes in accordance with
737 NDT Part 6, 51-00-00, Figure 16.
737 NDT Part 6,
51-00-00, Figure
16
4 Bolt Hole Lo-
cations
Bolt HolesInspect1
Do an external HFEC inspection of the
skin for cracks that start at the drain
mast bolt holes in accordance with 737
NDT Part 6, 51-00-00, Figure 4 or 737
NDT Part 6, 51-00-00, Figure 23. Inspect
approximately a 0.125 inch zone around
each bolt hole.
737 NDT Part 6,
51-00-00, Figure 4
/ 737 NDT Part 6,
51-00-00, Figure
23
-SkinInspect2
Do an external detailed inspection of the
skin for signs of corrosion adjacent to
the drain mast bolt holes.
--SkinInspect3
Do an internal HFEC inspection of the
channel and the fillers for cracks that
start at the drain mast bolt holes in accor-
dance with 737 NDT Part 6, 51-00-00,
Figure 4 or 737 NDT Part 6, 51-00-00,
Figure 23. Inspect approximately a 0.125
inch zone around each bolt hole.
737 NDT Part 6,
51-00-00, Figure 4
/ 737 NDT Part 6,
51-00-00, Figure
23
-Channel /
Fillers
Inspect4
Do an internal detailed inspection of the
channel and the fillers for signs of corro-
sion adjacent to the drain mast bolt
holes.
--Channel /
Fillers
Inspect5
FIGURE 8: DO AN HFEC AND DETAILED INSPECTION OF THE SKIN, THE CHANNEL, AND THE FILLERS
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
51 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 52 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
This Figure applies only to: Group 1.
S-24L
BOLT LOCATION 1  BOLT LOCATION 3  BOLT LOCATION 4
BOLT LOCATION 2
BONDING STRAP
DRAIN MAST WIRE  (5 7) DRAIN MAST TUBE
(6) DRAIN MAST WIRE
BOLT LOCATION 2 A
BOLT LOCATION 1  BOLT
LOCATION 3
B  BONDING  STRAP
BOLT
LOCATION 4
OA SKIN
0E0D8  AFT DRAIN MAST  A-A  FWD  2078133
FIGURE 9: INSTALL THE DRAIN MAST
(SHEET 1 OF 4)
Original Issue: October 31, 2011
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.

### Page 53 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
(3) BOLT
FILLER
) WASHER
CHANNEL•  3) SEAL WASHER
SKIN  DRAIN MAST
BOLT LOCATIONS 1, 2 AND 3
3) BOLT
ONDIN
WASHER
CHANNEL  SEAL WASHER
- FILLER
SKIN  DRAIN MAST
BOLT LOCATION 4
2078138
FIGURE 9: INSTALL THE DRAIN MAST
(SHEET 2 OF 4)
Original Issue: October 31, 2011
BOEING PROPRIETARY -  737-53A1318
Copyright © Unpublished Work - See page 1 for details.  53 of 58

### Page 54

CAUTION: OBEY THE INSTRUCTIONS IN THE STEPS TO APPLY THE SEALANT. IF YOU DO NOT OBEY
THE INSTRUCTIONS, DAMAGE TO THE AIRPLANE SURFACE CAN OCCUR.
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAPART NUMBER /
SPEC
NAMETASKSTEP
Apply sealant BMS 5-95, Type 1, Class B-
1/2 or Class B-2 to the drain mast and the
airplane faying surface. Make sure you do
not damage the skin when you apply the
sealant. Refer to SOPM 20-50-19, 737-
100/200 AMM 51-31-0 and 737-300/400/500
AMM 51-31-00 as accepted procedures.
BMS 5-95, Type 1,
Class B-1/2 or Class
B-2 / SOPM 20-50-
19, 737-100/200
AMM 51-31-0, 737-
300/400/500 AMM
51-31-00
Drain MastSeal1
Put the kept drain mast in position.-Drain MastInstall /
Kept
2
Install new drain mast bolts and washers in
accordance with Table 1. Make sure that you
install the kept bonding strap at Bolt Location
4 in accordance with Table 1.
Use the part num-
bers and specifica-
tions in accordance
with Table 1
Bolts / Wash-
ers / Bonding
Strap
Install /
New / Kept
3
Make a fillet seal (aerodynamic smoother)
around the drain mast with sealant BMS 5-
95, Type 1, Class B-1/2 or Class B-2. Make
sure you do not damage the skin when you
apply the sealant. Refer to SOPM 20-50-19,
737-100/200 AMM 51-31-0 and 737-
300/400/500 AMM 51-31-00 as accepted
procedures.
BMS 5-95, Type 1,
Class B-1/2 or Class
B-2 / SOPM 20-50-
19, 737-100/200
AMM 51-31-0, 737-
300/400/500 AMM
51-31-00
Drain MastSeal4
Connect the kept drain mast tube to the fit-
ting on the drain mast with the kept clamp.
-Drain Mast
Tube / Clamp
Connect /
Kept
5
Connect the kept drain mast electrical wires.-Drain Mast
Wires
Connect /
Kept
6
Do a check for leaks on the drain mast in
accordance with the instructions that follow:
Plug the drain mast. Let the water run from
the sink of an adjacent lavatory. Check for
leaks at the drain mast tube connection to
the drain mast. Remove the plug from the
drain mast.
-Drain Mast /
Drain Mast
Tube
Test7
Do a check for heating of the drain mast.
Refer to 737 737-100/200 AMM 30-71-0 and
737-300/400/500 AMM 30-71-00 as accept-
ed procedures.
737-100/200 AMM
30-71-0, 737-
300/400/500 AMM
30-71-00
Drain MastTest8
FIGURE 9: INSTALL THE DRAIN MAST
(SHEET 3 OF 4)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
54 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 55

Table 1: Installation of the Drain Mast Bolts, Washers, and Bonding Strap
More DataQTYPART NUMBERNAMEBOLT LOCATION
(a) (b)1BACB30LM4-4BoltBolt Location 1
(b)1NAS1149D0416HWasher
(b)1NAS1523C4RSeal Washer
(a) (b)1BACB30LM4-4BoltBolt Location 2
(b)1NAS1149D0416HWasher
(b)1NAS1523C4RSeal Washer
(a) (b)1BACB30LM4-4BoltBolt Location 3
(b)1NAS1149D0416HWasher
(b)1NAS1523C4RSeal Washer
(a) (b) (c) (d) (e)1BACB30LM4-4BoltBolt Location 4
(b) (c) (d) (e)1NAS1149D0416HWasher
(b) (c) (d) (e)1NAS1523C4RSeal Washer
(b) (c) (d) (e)1Kept PartBonding Strap
(a) Apply torque to the drain mast bolts in accordance with the instructions that follow: Apply a torque of 8 -
12 inch-pounds to bolt locations 1 and 4. Apply a torque of 8 - 12 inch-pounds to bolt locations 2 and 3.
Apply a torque of 38 - 42 inch-pounds to bolt locations 1 and 4. Apply a torque of 38 - 42 inch-pounds to
bolt locations 2 and 3. Apply a final torque of 78 - 82 inch-pounds to bolt locations 1 and 4. Apply a final
torque of 78 - 82 inch-pounds to bolt locations 2 and 3. Refer to SOPM 20-50-01 as an accepted procedure.
(b) Apply chemical conversion coating Type 2, Class A to the bare surfaces of the washers and bonding strap
lug after you install them. Refer to SOPM 20-43-03 as an accepted procedure. Apply one coat of primer
BMS 10-11, Type I to the drain mast bolts, washers, and bonding strap lug. Refer to SOPM 20-41-02 as
an accepted procedure.
(c) This is the forward drain mast bolt location.
(d) These are electrical bonding parts. Clean the drain mast bolt, the washers, and the bonding strap before
you install them. Refer to SOPM 20-11-03, Cleaning Method CM3, as an accepted procedure. Make sure
the bonding area meets electrical bonding requirements. The resistance between the bonding strap and
the airplane structure must be less than 0.001 ohm. Refer to SWPM 20-20-00 and SWPM 20-20-10 as
accepted procedures.
(e) Apply sealant BMS 5-95, Type 1, Class B-1/2 or B-2 to the drain mast bolt, washers, and bonding strap
lug. This gives corrosion protection at the electrical bonding location. Refer to SOPM 20-50-19, 737-
100/200 AMM 51-31-0 and 737-300/400/500 AMM 51-31-00 as accepted procedures.
FIGURE 9: INSTALL THE DRAIN MAST
(SHEET 4 OF 4)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
55 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

### Page 56 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
This Figure applies only to: Group 1.
— 0.50 -→
0.20
- 0.10
0.075
1.50
TOOL A
MINIMUM
0.056  (NO-GO GAUGE)  MEASUREMENT
TOOL A
2086586
FIGURE 10: OPTIONAL TOOL A AND TOOL B - MADE BY THE OPERATOR
(SHEET 1 OF 3)
Original Issue: October 31, 2011
BOEING PROPRIETARY -  737-53A1318
Copyright © Unpublished Work - See page 1 for details.  56 of 58

### Page 57 (OCR)

BOEING SERVICE BULLETIN 737-53A1318
ALERT  ALERT
- 0.50 -
- 0.10
0.110
8 7001
1.50
TOOL B
MINIMUM
0.085  MEASUREMENT
(NO-GO GAUGE)
TOOL B
2086587
FIGURE 10: OPTIONAL TOOL A AND TOOL B - MADE BY THE OPERATOR
(SHEET 2 OF 3)
Original Issue: October 31, 2011
BOEING PROPRIETARY -  737-53A1318
Copyright © Unpublished Work - See page 1 for details.  57 of 58

### Page 58

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAPART NUMBERNAMETASKSTEP
Make Tool A from aluminum. (a) (b) (c) (d)
(e)
Tool AMeasuring
Tool, Washers
Make1
Make Tool B from aluminum. (a) (b) (c) (d)
(e)
Tool BMeasuring
Tool, Washers
and Bonding
Strap Lug
Make2
(a) The operator can supply any aluminum alloy and heat treat to make the tool.
(b) Tolerance for dimensions X.XX is plus or minus 0.03. Tolerance for dimensions X.XXX is plus or
minus 0.001.
(c) Break all sharp edges.
(d) No finish is necessary.
(e) Identify each end of the tool as shown. Any marking method is acceptable.
FIGURE 10: OPTIONAL TOOL A AND TOOL B - MADE BY THE OPERATOR
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 31, 2011
737-53A1318
58 of 58
BOEING SERVICE BULLETIN 737-53A1318
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
