# Boeing Alert Service Bulletin 737-53A1353: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-9434; AD 2017-10-22 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 737-53A1353](https://openairdocs.org/service-documents/boeing/737-53a1353.md)
- Title as filed: SB-737-53A1353-00
- Pages: 37
- PDF: https://openairdocs.org/files/sha256/66/35/66352632805bedbe84f043ba89f74bc55618cd989db45f61600e367dac2dc213
- Page: https://openairdocs.org/service-documents/boeing/737-53a1353/file/66352632805b

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-53A1353
Original Issue: July 21, 2016
ATA System: 5311
SUBJECT: FUSELAGE - Body Station 1016 Aft Pressure Bulkhead - Inspection for Fatigue Cracks
at Web Lap Splices
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2016 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: July 21, 2016
737-53A1353
1 of 37
4.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
2 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 21
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 23
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 23
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
FIGURE 1: LFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP SPLICES . . . . . . . . 29
FIGURE 2: HFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP SPLICES . . . . . . . 31
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 1: INSPECTION OF AFT
PRESSURE BULKHEAD WEB LAP SPLICES  [Group 1, Configuration 1] . . . . . . . . . 33
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 2: INSPECTION OF AFT
PRESSURE BULKHEAD WEB LAP SPLICES - LCA AIRPLANES [Group 1, Configuration 2]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
3 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
4 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
737
Service Bulletin
ALERT
SummaryNumber: 737-53A1353Original Issue: July 21, 2016
ATA System: 5311
SUBJECT: FUSELAGE - Body Station 1016 Aft Pressure Bulkhead - Inspection for Fatigue Cracks
at Web Lap Splices
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
During in-service inspections of a 737-300 aft pressure bulkhead, one operator reported two cracks on the web
lap splices outside the inspection area of Boeing Service Bulletin (SB) 737-53A1214. Since
737-600/-700/-700C/-800/-900 airplanes have a similar structural design for the aft pressure bulkhead, they
could develop cracks in the same locations. The aft pressure bulkhead web lap splices have multiple identical
details that have the potential for Widespread Fatigue Damage (WFD). Boeing has determined that the existing
Maintenance Planning Data (MPD) Section 9 inspections are not adequate enough to detect these cracks. This
bulletin provides inspections to detect cracks at the web lap splices to preclude WFD out to the Limit of Validity
(LOV). If not detected, multiple cracks in the web lap splices could develop which can result in possible rapid
decompression and loss of structural integrity.
The aft pressure bulkhead has been determined to be structure that is susceptible to Widespread Fatigue
Damage (WFD).
Boeing Service Related Problem (SRP) 737NG-53-0495 is related to this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
5 of 37

### Page 6

This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedNoPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
NoOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION
Get access to the aft side of the aft pressure bulkhead and at each web lap splice, perform a Low Frequency
Eddy Current (LFEC) inspection along the fastener row common to the stiffener and a High Frequency Eddy
Current (HFEC) inspection along the fastener row not common to the stiffener. If any crack is found, contact
The Boeing Company for repair instructions and do the repair, and perform repeat inspections on unrepaired
inspection areas at the times indicated in Paragraph 1.E., Compliance. If no crack is found, perform repeat
inspections at the times indicated in Paragraph 1.E., Compliance.
EFFECTIVITY
737-600/-700/-700C/-800/-900 airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
6 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 7 (OCR)

BOEING SERVICE BULLETIN 737-53A1353
ALERT  ALERT
MATERIAL INFORMATION
None.
BL
• S-7L
ACCESS
DOOR
WEB LAP SPLICE  (7 LOCATIONS)  •STRAP  TEAR
S-7R
RADIAL
STIFFENER  S-15L-
S-23L  -S-15R
DOUBLER
WEB
WEB  S-23R
INSPECT THE WEB
ALONG THE LAP
SPLICE FASTENER
ROWS USING EDDY
CURRENT INSPECTION  2391053
A-A
Original Issue: July 21, 2016
Export Controlled ECCN: 9E991 - BOEING  737-53A1353
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  7 of 37

### Page 8

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
8 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-53A1353
Original Issue: July 21, 2016
ATA System: 5311
SUBJECT: FUSELAGE - Body Station 1016 Aft Pressure Bulkhead - Inspection for Fatigue Cracks
at Web Lap Splices
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is applicable to 737-600/-700/-700C/-800/-900 airplanes, line numbers 1 -
1755 in one Group. The Variable Numbers and Group Information for the applicable airplanes is
given below.
Refer to Service Bulletin Index D6-19567 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP
737-600/-700/-700C/-800/-900 airplanes, line numbers 1 - 1755.-1
Airplanes that have not incorporated Boeing Business Jet (BBJ)
Lower Cabin Altitude (LCA) Supplemental Type Certificate (STC)
ST01697SE (6500 feet maximum cabin altitude in lieu of 8000 feet)
as referenced in Boeing Service Bulletin (SB) 737-21-1149.
1
Airplanes that have incorporated BBJ LCA STC ST01697SE (6500
feet maximum cabin altitude in lieu of 8000 feet) as referenced in SB
737-21-1149.
2
Airplane Models:
737-600, 737-700, 737-700C, 737-800, 737-900
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
9 of 37

### Page 10

GroupVariable Number
1YA001 - YA099
1YA101 - YA199
1YA201 - YA211
1YA221
1YA231 - YA242
1YA251 - YA256
1YA271 - YA272
1YA291
1YA301 - YA302
1YA311 - YA314
1YA321 - YA323
1YA336 - YA345
1YA351
1YA356 - YA357
1YA366 - YA367
1YA371 - YA377
1YA501 - YA536
1YA541 - YA552
1YA571 - YA578
1YA601 - YA615
1YA621 - YA622
1YA626 - YA631
1YA635 - YA636
1YA641 - YA642
1YA645 - YA650
1YA656 - YA659
1YA666 - YA667
1YA671 - YA672
1YA681 - YA691
1YA701 - YA710
1YA721 - YA722
1YA731 - YA734
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
10 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 11

GroupVariable Number
1YA751 - YA756
1YA801 - YA803
1YA809
1YA811 - YA814
1YA831 - YA835
1YA841 - YA862
1YA881 - YA882
1YA891 - YA892
1YA961 - YA976
1YB001 - YB006
1YB101 - YB132
1YB151 - YB153
1YB156 - YB157
1YB161 - YB164
1YB171 - YB172
1YB181 - YB184
1YB201 - YB208
1YB271
1YB276
1YB301 - YB310
1YB371 - YB381
1YB501 - YB502
1YB521 - YB526
1YB541 - YB544
1YB551
1YB561 - YB574
1YB576 - YB577
1YB581 - YB587
1YB601 - YB632
1YB651
1YB656
1YB851 - YB863
1YB871 - YB873
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
11 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 12

GroupVariable Number
1YB881 - YB888
1YB901 - YB903
1YB911
1YC001 - YC030
1YC051 - YC083
1YC091 - YC094
1YC101 - YC104
1YC111 - YC113
1YC121
1YC126 - YC127
1YC136 - YC141
1YC146 - YC147
1YC151 - YC156
1YC166 - YC171
1YC176 - YC178
1YC186 - YC189
1YC201 - YC203
1YC206 - YC207
1YC301 - YC305
1YC321 - YC386
1YC391 - YC394
1YC396
1YC401 - YC417
1YC421 - YC422
1YC426 - YC428
1YC436 - YC437
1YC441 - YC448
1YC451 - YC455
1YC459
1YC461 - YC467
1YC471 - YC499
1YC501 - YC526
1YC571 - YC583
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
12 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 13

GroupVariable Number
1YC587 - YC589
1YC591 - YC593
1YC601 - YC655
1YC681 - YC696
1YC701 - YC715
1YC720 - YC725
1YC727 - YC741
1YC751 - YC752
1YC761 - YC770
1YC781 - YC793
1YC801 - YC892
1YC901 - YC907
1YC921 - YC922
1YC931 - YC932
1YC941 - YC951
1YC971 - YC978
1YC981 - YC983
1YD001 - YD007
1YD021 - YD025
1YD041 - YD057
1YD081 - YD084
1YD101 - YD108
1YD121 - YD126
1YD151 - YD159
1YD171 - YD172
1YD201 - YD203
1YD206 - YD209
1YD216 - YD219
1YD251 - YD254
1YD256 - YD257
1YD261
1YD301 - YD334
1YD391
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
13 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 14

GroupVariable Number
1YD401 - YD410
1YD412
1YD481 - YD485
1YD491
1YD501 - YD512
1YD531 - YD535
1YD541 - YD547
1YD561 - YD564
1YD571 - YD572
1YD591 - YD595
1YD601 - YD612
1YD651 - YD653
1YE001 - YE020
1YE051
1YE101 - YE109
1YE151 - YE157
1YE171 - YE172
1YE201 - YE206
1YE301 - YE305
1YE321 - YE326
1YG001 - YG044
1YG061 - YG064
1YG066 - YG089
1YG091
1YG201
1YG211
1YG501 - YG508
1YG601 - YG602
1YJ001 - YJ004
1YJ011 - YJ013
1YJ021
1YJ471 - YJ480
1YJ501 - YJ517
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
14 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 15

GroupVariable Number
1YJ531 - YJ546
1YJ591 - YJ594
1YJ631 - YJ632
1YJ671 - YJ682
1YJ801 - YJ853
1YJ861 - YJ867
1YJ871
1YJ901 - YJ902
1YJ911 - YJ923
1YJ931 - YJ936
1YJ941 - YJ943
1YK001 - YK007
1YK101 - YK104
1YK111 - YK112
1YK121 - YK122
1YK131 - YK132
1YK136 - YK137
1YK301 - YK304
1YK321 - YK330
1YK361 - YK366
1YK401 - YK406
1YK426 - YK427
1YK431 - YK432
1YK456 - YK460
1YK480 - YK484
1YK511 - YK512
1YK601
1YM101 - YM103
1YM201 - YM204
1YM251 - YM267
1YM471
1YM481 - YM482
1YM521
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
15 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 16

GroupVariable Number
1YM541
1YM551
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
During in-service inspections of a 737-300 aft pressure bulkhead, one operator reported two cracks
on the web lap splices outside the inspection area of Boeing Service Bulletin (SB) 737-53A1214. Since
737-600/-700/-700C/-800/-900 airplanes have a similar structural design for the aft pressure bulkhead,
they could develop cracks in the same locations. The aft pressure bulkhead web lap splices have
multiple identical details that have the potential for Widespread Fatigue Damage (WFD). Boeing has
determined that the existing Maintenance Planning Data (MPD) Section 9 inspections are not adequate
enough to detect these cracks. This bulletin provides inspections to detect cracks at the web lap splices
to preclude WFD out to the Limit of Validity (LOV). If not detected, multiple cracks in the web lap splices
could develop which can result in possible rapid decompression and loss of structural integrity.
Boeing Service Related Problem (SRP) 737NG-53-0495 are related to this service bulletin.
D. Description
Get access to the aft side of the aft pressure bulkhead and at each web lap splice, perform a Low
Frequency Eddy Current (LFEC) inspection along the fastener row common to the stiffener and a High
Frequency Eddy Current (HFEC) inspection along the fastener row not common to the stiffener. If any
crack is found, contact The Boeing Company for repair instructions and do the repair, and perform
repeat inspections on unrepaired inspection areas at the times indicated in Paragraph 1.E., Compliance.
If no crack is found, perform repeat inspections at the times indicated in Paragraph 1.E., Compliance.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
311, 312737-600, 737-700, 737-700C,
737-800, 737-900
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
16 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 17

E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
A logic diagram showing compliance tasks and compliance times is included as an aid in APPENDIX
A and APPENDIX B.
Do the required actions in accordance with Paragraph 3. Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Group 1, Configuration 1:
Table 1: Inspection of Aft Pressure Bulkhead Web Lap Splices
Repeat Interval (Not to Exceed)Compliance TimeActionCondition
-Before 40,000 total
flight cycles or within
4,000 flight cycles af-
ter the Original Issue
date of this Service
Bulletin, whichever
occurs later.
Do PART 1: LFEC INSPEC-
TION OF AFT PRESSURE
BULKHEAD WEB LAP
SPLICE for any crack at the
fastener row common to the
stiffener. (a)
All Airplanes.
-Before further flight.CONDITION 1 (ACTION 1):CONDITION 1:
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
ANY CRACK FOUND.
8,000 flight cy-
cles.
Airplanes with
less than 50,000
total flight cycles.
-CONDITION 1 (ACTION 2):
Repeat PART 1: LFEC IN-
SPECTION OF AFT PRES-
SURE BULKHEAD WEB
LAP SPLICE for any crack
on unrepaired inspection
areas of the fastener row
common to the stiffener.
4,000 flight cy-
cles.
Airplanes with
50,000 or more
total flight cycles.
8,000 flight cy-
cles.
Airplanes with
less than 50,000
total flight cycles.
-Repeat PART 1: LFEC IN-
SPECTION OF AFT PRES-
SURE BULKHEAD WEB
LAP SPLICE for any crack
at the fastener row common
to the stiffener. (a)
CONDITION 2:
NO CRACK FOUND.
4,000 flight cy-
cles.
Airplanes with
50,000 or more
total flight cycles.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
17 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 18

Group 1, Configuration 1:
Table 1: Inspection of Aft Pressure Bulkhead Web Lap Splices
Repeat Interval (Not to Exceed)Compliance TimeActionCondition
-Before 40,000 total
flight cycles or within
4,000 flight cycles af-
ter the Original Issue
date of this Service
Bulletin, whichever
occurs later.
Do PART 2: HFEC INSPEC-
TION OF AFT PRESSURE
BULKHEAD WEB LAP
SPLICE for any crack at the
fastener row not common
to the stiffener. (a)
All Airplanes.
-Before further flight.CONDITION 3 (ACTION 1):CONDITION 3:
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
ANY CRACK FOUND.
16,000 flight
cycles.
Airplanes with
less than 50,000
total flight cycles.
-CONDITION 3 (ACTION 2):
Repeat PART 2: HFEC IN-
SPECTION OF AFT PRES-
SURE BULKHEAD WEB
LAP SPLICE for any crack
on unrepaired inspection
areas of the fastener row
not common to the stiffener.
8,000 flight cy-
cles.
Airplanes with
50,000 or more
total flight cycles.
16,000 flight
cycles.
Airplanes with
less than 50,000
total flight cycles.
-Repeat PART 2: HFEC IN-
SPECTION OF AFT PRES-
SURE BULKHEAD WEB
LAP SPLICE for any crack
at the fastener row not
common to the stiffener. (a)
CONDITION 4:
NO CRACK FOUND.
8,000 flight cy-
cles.
Airplanes with
50,000 or more
total flight cycles.
(a) The web lap splices must be inspected from the center out to the second tear strap, except for web lap
splice locations covered by a tear strap or the doubler.
Group 1, Configuration 2:
Table 2: Inspection of Aft Pressure Bulkhead Web Lap Splices - LCA Airplanes
Repeat Interval (Not to Exceed)Compliance TimeActionCondition
-Before 28,000 total
flight cycles.
Do PART 1: LFEC INSPEC-
TION OF AFT PRESSURE
BULKHEAD WEB LAP
SPLICE for any crack at the
fastener row common to the
stiffener. (a)
All Airplanes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
18 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 19

Group 1, Configuration 2:
Table 2: Inspection of Aft Pressure Bulkhead Web Lap Splices - LCA Airplanes
Repeat Interval (Not to Exceed)Compliance TimeActionCondition
-Before further flight.CONDITION 1 (ACTION 1):CONDITION 1:
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
ANY CRACK FOUND.
3,000 flight cycles.-CONDITION 1 (ACTION 2):
Repeat PART 1: LFEC IN-
SPECTION OF AFT PRES-
SURE BULKHEAD WEB
LAP SPLICE for any crack
on unrepaired inspection
areas of the fastener row
common to the stiffener.
3,000 flight cycles.-Repeat PART 1: LFEC IN-
SPECTION OF AFT PRES-
SURE BULKHEAD WEB
LAP SPLICE for any crack
at the fastener row common
to the stiffener. (a)
CONDITION 2:
NO CRACK FOUND.
-Before 28,000 total
flight cycles.
Do PART 2: HFEC INSPEC-
TION OF AFT PRESSURE
BULKHEAD WEB LAP
SPLICE for any crack at the
fastener row not common
to the stiffener. (a)
All Airplanes.
-Before further flight.CONDITION 3 (ACTION 1):CONDITION 3:
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
ANY CRACK FOUND.
6,000 flight cycles.-CONDITION 3 (ACTION 2):
Repeat PART 2: HFEC IN-
SPECTION OF AFT PRES-
SURE BULKHEAD WEB
LAP SPLICE for any crack
on unrepaired inspection
areas of the fastener row
not common to the stiffener.
6,000 flight cycles.-Repeat PART 2: HFEC IN-
SPECTION OF AFT PRES-
SURE BULKHEAD WEB
LAP SPLICE for any crack
at the fastener row not
common to the stiffener. (a)
CONDITION 4:
NO CRACK FOUND.
(a) The web lap splices must be inspected from the center out to the second tear strap, except for web lap
splice locations covered by a tear strap or the doubler.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
19 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 20

F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
This service bulletin is also approved for airplanes having FAA Aviation Partners Boeing (APB)
Supplemental Type Certificate (STC) number ST00830SE installed (not including any areas affected
by the split scimitar winglet configuration).
For 737-700C and BBJ models that have APB winglets installed by STC number ST00830SE, the
operator is responsible for obtaining appropriate regulatory agency approval before incorporating this
service bulletin if the bulletin is in the area affected by blended winglets.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
The manager of the FAA Seattle Aircraft Certification Office approves the incorporation and
accomplishment of the applicable inspections defined in this service bulletin (SB), with the compliance
times specified in Paragraph 1.E., Compliance of this SB, as an Alternative Method of Compliance
(AMOC) to the corresponding inspection program for Principal Structure Elements 53-80-01-3 and
53-80-01-7, required by paragraphs (g) and (h) of AD 2013-19-23. This AMOC is only applicable after
accomplishment of the initial inspections specified in Paragraph 1.E., Compliance of the SB.
G. Manpower
The table below shows an estimate of the task hours necessary to do this inspection for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools.
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
8.4016.802Figure 1
4.208.402Figure 2
0.250.251Close Access
13.1025.70TOTAL FOR EACH AIRPLANE (a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
20 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 21

Elapsed HoursTask HoursNumber of PersonsTask
(a) Manpower estimates for any repairs are dependent on the inspection findings
and are not included in the total.
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Boeing Service Bulletin 737-21-1149, 737-53A1214
b. Boeing Service Letter 737-SL-51-042
c. Boeing Service Related Problem (SRP) 737NG-53-0495
d. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2013-19-23
e. Service Bulletin Index D6-19567
f. 737 Non-Destructive Testing (NDT) Manual Part 6, 51-00-00, Part 6, 53-10-41
g. 737-600/700/800/900 Aircraft Maintenance Manual (AMM) 52-49-11
h. 737-600/700/800/900 Maintenance Planning Data (MPD) Section 9
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
Pressure Bulkhead Assembly - STA 1016148A2280
The table above lists applicable drawings used to prepare this service bulletin. The drawings are
not necessary to make the specified changes, and are not supplied with this service bulletin. The
drawings may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
21 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 22

2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS but no new DTIs are necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
22 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 23

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the inspection given in this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
None.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
23 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 24

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
24 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT
BLANK PAGE

### Page 25

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 737 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 737
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
5. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
6. Boeing Service Letter 737-SL-51-042, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
7. Refer to Appendix A and Appendix B for logic diagrams. Logic diagrams are provided
as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information in Paragraph 3.B., Work Instructions is the
primary source for tasks required for compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
25 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 26

8. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
9. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
10. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
11. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an
OPTION number, do all of the ACTION numbers for that CONDITION number or
OPTION number.
12. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
13. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. An Alternative Method of
Compliance (AMOC) is required for any deviations to RC steps, including sub-steps
and identified figures. Steps not labeled as RC may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC. This is provided that the RC steps, including
sub-steps and identified figures, can still be done as specified, and the airplane can
be put back in an airworthy condition.
14. LFEC is defined as Low Frequency Eddy Current.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
26 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 27

15. HFEC is defined as High Frequency Eddy Current.
B. WORK INSTRUCTIONS
1. Open access to the aft side of the aft pressure bulkhead by opening the Section 48 access and
blowout door. Refer to 737-600/700/800/900 AMM 52-49-11 as an accepted procedure.
2. RC - Do PART 1: LFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP SPLICE for
any crack at the fastener row common to the stiffener.
NOTE: The web lap splices must be inspected from the center out to the second tear strap,
except for web lap splice locations covered by a tear strap or the doubler.
a. CONDITION 1: ANY CRACK FOUND
(1) CONDITION 1 (ACTION 1):
(a) Contact The Boeing Company for repair instructions and do the repair.
(2) CONDITION 1 (ACTION 2):
(a) Repeat PART 1: LFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP
SPLICE for any crack on unrepaired inspection areas of the fastener row common
to the stiffener. Do the inspection at the repeat interval specified in Paragraph 1.E.,
Compliance.
b. CONDITION 2: NO CRACK FOUND
(1) Repeat PART 1: LFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP SPLICE
for any crack at the fastener row common to the stiffener. Do the inspection at the repeat
interval specified in Paragraph 1.E., Compliance.
3. RC - Do PART 2: HFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP SPLICE for
any crack at the fastener row not common to the stiffener.
NOTE: The web lap splices must be inspected from the center out to the second tear strap,
except for web lap splice locations covered by a tear strap or the doubler.
a. CONDITION 3: ANY CRACK FOUND
(1) CONDITION 3 (ACTION 1):
(a) Contact The Boeing Company for repair instructions and do the repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
27 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 28

(2) CONDITION 3 (ACTION 2):
(a) Repeat PART 2: HFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP
SPLICE for any crack on unrepaired inspection areas of the fastener row not common
to the stiffener. Do the inspection at the repeat interval specified in Paragraph 1.E.,
Compliance.
b. CONDITION 4: NO CRACK FOUND
(1) Repeat PART 2: HFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP
SPLICE for any crack at the fastener row not common to the stiffener. Do the inspection
at the repeat interval specified in Paragraph 1.E., Compliance.
4. Close access to the aft side of the aft pressure bulkhead by closing the Section 48 access and
blowout door. Refer to 737-600/700/800/900 AMM 52-49-11 as an accepted procedure.
5. Put the airplane back to a serviceable condition.
PART 1: LFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP SPLICE
1. Do an LFEC inspection of the fastener row common to the stiffener from the aft side of the aft
pressure bulkhead in accordance with FIGURE 1.
PART 2: HFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP SPLICE
1. Do an HFEC inspection of the fastener row not common to the stiffener from the aft side of the aft
pressure bulkhead in accordance with FIGURE 2.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
28 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 29 (OCR)

BOEING SERVICE BULLETIN 737-53A1353
ALERT  ALERT
BL
S-7L
ACCESS
DOOR
WEB LAP SPLICE  •STRAP  TEAR
(7 LOCATIONS)
S-7R
S-15L
S-23L  -S-15R
DOUBLER
S-23R
FIGURE 1: LFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP SPLICES
(SHEET 1 OF 2)
Original Issue: July 21, 2016
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  29 of 37

### Page 30

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b)7-Web Lap SpliceInspect1
(a) Do an LFEC inspection along the fastener row common to the stiffener in accordance with 737 NDT
Manual Part 6, 53-10-41. This fastener row is closest to the visible edge.
(b) The web lap splices must be inspected from the center out to the second tear strap, except for web lap
splice locations covered by a tear strap or the doubler.
FIGURE 1: LFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP SPLICES
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
30 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 31 (OCR)

BOEING SERVICE BULLETIN 737-53A1353
ALERT  ALERT
BL
S-7L
ACCESS
DOOR
WEB LAP SPLICE  •STRAP  TEAR
(7 LOCATIONS)
S-7R
S-15L
S-23L  _S-15R
DOUBLER
S-23R
2457643
FIGURE 2: HFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP SPLICES
(SHEET 1 OF 2)
Original Issue: July 21, 2016
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  737-53A1353  31 of 37

### Page 32

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b)7-Web Lap SpliceInspect1
(a) Do an HFEC inspection along the fastener row not common to the stiffener in accordance with 737 NDT
Manual Part 6, 51-00-00, Procedure 4 or 23. This fastener row is furthest from the visible edge.
(b) The web lap splices must be inspected from the center out to the second tear strap, except for web lap
splice locations covered by a tear strap or the doubler.
FIGURE 2: HFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP SPLICES
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
32 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 33

This Appendix applies only to: Group 1, Configuration 1.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
LFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP SPLICEPART 1
HFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP SPLICEPART 2
ANY CRACK FOUNDCONDITION 1
NO CRACK FOUNDCONDITION 2
ANY CRACK FOUNDCONDITION 3
NO CRACK FOUNDCONDITION 4
2. The table below gives the description for the flag notes called out in the logic diagram. The information
presented in the flag notes below is equivalent to the footnote information presented in the compliance
table.
DescriptionFlag Note Letter
The web lap splices must be inspected from the center out to the second tear strap, except
for web lap splice locations covered by a tear strap or the doubler.
(a)
APPENDIX A:  LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 1: INSPECTION OF AFT
PRESSURE BULKHEAD WEB LAP SPLICES
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
33 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 34 (OCR)

BOEING SERVICE BULLETIN 737-53A1353
ALERT  ALERT
WHICHEVER OCCURS LATER
WITHIN 4,000 FLIGHT
BEFORE 40,000 TOTAL  CYCLES AFTER THE  ORIGINAL ISSUE DATE
FLIGHT CYCLES  OF THIS SERVICE
BULLETIN
a)
DO PART 1
CONDITION 1  CONDITION 2
BEFORE
FURTHER
FLIGHT
AIRPLANES  AIRPLANES
WITH LESS  WITH 50,000 OR
CONTACT THE  THAN 50,000  MORE TOTAL
BOEING COMPANY  TOTAL FLIGHT  FLIGHT
INSTRUCTIONS AND  FOR REPAIR  CYCLES:  CYCLES:
DO THE REPAIR
8,000 FLIGHT  4,000 FLIGHT
CYCLES  CYCLES
AIRPLANES  AIRPLANES
WITH LESS  WITH 50,000
THAN 50,000  OR MORE
TOTAL FLIGHT  TOTAL FLIGHT
CYCLES:  CYCLES:  REPEAT
8,000 FLIGHT  4,000 FLIGHT  PART 1
CYCLES  CYCLES
REPEAT PART 1 AT THE  2399639
UNREPAIRED AREAS
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 1: INSPECTION OF AFT
PRESSURE BULKHEAD WEB LAP SPLICES
(SHEET 2 OF 3)
Original Issue: July 21, 2016
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-53A1353
Work - See page 1 for details.  34 of 37

### Page 35 (OCR)

BOEING SERVICE BULLETIN 737-53A1353
ALERT  ALERT
(a)
DO PART 2
CONDITION 3  CONDITION 4
BEFORE
FURTHER
FLIGHT
AIRPLANES  AIRPLANES
WITH LESS  WITH 50,000 OR
CONTACT THE  THAN 50,000  MORE TOTAL
BOEING COMPANY  TOTAL FLIGHT  FLIGHT
FOR REPAIR  CYCLES:  CYCLES:
INSTRUCTIONS AND
DO THE REPAIR
16,000 FLIGHT  8,000 FLIGHT
CYCLES  CYCLES
AIRPLANES  AIRPLANES
WITH LESS  WITH 50,000
THAN 50,000  OR MORE
TOTAL FLIGHT  TOTAL FLIGHT
CYCLES:  CYCLES:
REPEAT
16,000 FLIGHT  8,000 FLIGHT  PART 2
CYCLES  CYCLES
REPEAT PART 2 AT THE
UNREPAIRED AREAS  2458262
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 1: INSPECTION OF AFT
PRESSURE BULKHEAD WEB LAP SPLICES
(SHEET 3 OF 3)
Original Issue: July 21, 2016
Export Controlled ECCN: 9E991 - BOEING  737-53A1353
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  35 of 37

### Page 36

This Appendix applies only to: Group 1, Configuration 2.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
LFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP SPLICEPART 1
HFEC INSPECTION OF AFT PRESSURE BULKHEAD WEB LAP SPLICEPART 2
ANY CRACK FOUNDCONDITION 1
NO CRACK FOUNDCONDITION 2
ANY CRACK FOUNDCONDITION 3
NO CRACK FOUNDCONDITION 4
2. The table below gives the description for the flag notes called out in the logic diagram. The information
presented in the flag notes below is equivalent to the footnote information presented in the compliance
table.
DescriptionFlag Note Letter
The web lap splices must be inspected from the center out to the second tear strap, except
for web lap splice locations covered by a tear strap or the doubler.
(a)
APPENDIX B:  LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 2: INSPECTION OF AFT
PRESSURE BULKHEAD WEB LAP SPLICES - LCA AIRPLANES
(SHEET 1 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: July 21, 2016
737-53A1353
36 of 37
BOEING SERVICE BULLETIN 737-53A1353
ALERTALERT

### Page 37 (OCR)

BOEING SERVICE BULLETIN 737-53A1353
ALERT  ALERT
BEFORE 28,000 TOTAL FLIGHT CYCLES
(a)
DO PART 1  DO PART 2
CONDITION 1  CONDITION 2  CONDITION 3  CONDITION 4
BEFORE  BEFORE
FURTHER  FURTHER
FLIGHT  FLIGHT
CONTACT THE  CONTACT THE
BOEING COMPANY  3,000  BOEING COMPANY  6,000
FOR REPAIR  FLIGHT  FOR REPAIR  FLIGHT
INSTRUCTIONS AND  CYCLES  INSTRUCTIONS AND  CYCLES
DO THE REPAIR  DO THE REPAIR
3,000  REPEAT  6,000  REPEAT
FLIGHT  PART 1  FLIGHT  PART 2
CYCLES  CYCLES
REPEAT PART 1 AT THE  REPEAT PART 2 AT THE  2457720
UNREPAIRED AREAS  UNREPAIRED AREAS
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 2: INSPECTION OF AFT
PRESSURE BULKHEAD WEB LAP SPLICES - LCA AIRPLANES
(SHEET 2 OF 2)
Original Issue: July 21, 2016
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  737-53A1353  37 of 37

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
