# Boeing Alert Service Bulletin 737-53A1364: SB-737-53A1364

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2017-0807; AD 2017-25-12 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 737-53A1364](https://openairdocs.org/service-documents/boeing/737-53a1364.md)
- Title as filed: SB-737-53A1364
- Pages: 114
- PDF: https://openairdocs.org/files/sha256/b1/92/b1921266860d0d1776cce7b3faf59b44e8f5b7d48b24a6963b36103a395b7c51
- Page: https://openairdocs.org/service-documents/boeing/737-53a1364/file/b1921266860d

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-53A1364
Original Issue: May 24, 2017
ATA System: 5311
SUBJECT: FUSELAGE- Frames and Bulkheads - Body Stations 685, 695, and 706 - Stub Beam
Web Inspection and Repair
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2017 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: May 24, 2017
737-53A1364
1 of 114
4.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
2 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
S u m m a r y  ...................................................... 5
1. PLANNING INFORMATION ........................................ 1 3
A . E f f e c t i v i t y  ............................................... 1 3
1. Airplanes ............................................ 1 3
2 . S p a r e s  A f f e c t e d  ........................................ 2 5
B. Concurrent Requirements ...................................... 2 5
C. Reason ................................................ 2 5
D. Description .............................................. 2 6
E. Compliance .............................................. 3 0
F . A p p r o v a l  ............................................... 3 8
G. Manpower .............................................. 3 9
H. Weight and Balance Changes .................................... 4 0
I. Electrical Load Data ......................................... 4 0
J . R e f e r e n c e s  .............................................. 4 0
1. Existing Data: ......................................... 4 0
2. Data Supplied with this Service Bulletin: ........................... 4 1
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 4 1
K. Publications Affected ........................................ 4 1
L. Interchangeability and Intermixability of Parts ........................... 4 2
M. Software Accomplishment Summary ................................ 4 2
2. MATERIAL INFORMATION ........................................ 4 3
A. Material - Price and Availability ................................... 4 3
B. Industry Support Information .................................... 4 3
C. Parts Necessary for Each Airplane ................................. 4 3
1 . K i t s / P a r t s  ............................................ 4 3
2. Parts and Materials Supplied by the Operator ........................ 4 3
3. Parts Modified and Reidentified ................................ 4 3
4. Parts Removed and Not Replaced .............................. 4 3
D. Parts Necessary to Change Spares ................................. 4 3
E. Special Tooling - Price and Availability ............................... 4 3
F. Special Tooling Necessary to do this Service Bulletin ....................... 4 3
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 4 5
A. GENERAL INFORMATION ..................................... 4 5
B. WORK INSTRUCTIONS ....................................... 4 7
FIGURE 1: STUB BEAM WEBS AT STA 685 AND STA 706 - LEFT SIDE - HIGH FREQUENCY EDDY
CURRENT (HFEC) AND DETAILED INSPECTIONS [Group 2] ............... 5 6
FIGURE 2: STUB BEAM WEBS AT STA 685 AND STA 706 - RIGHT SIDE - HIGH FREQUENCY EDDY
CURRENT (HFEC) AND DETAILED INSPECTIONS [Group 2] ............... 5 9
FIGURE 3: STUB BEAM WEBS AT STA 685 AND STA 706 - LEFT SIDE - HIGH FREQUENCY EDDY
CURRENT (HFEC) AND DETAILED INSPECTIONS [Group 3] ............... 6 2
FIGURE 4: STUB BEAM WEBS AT STA 685 AND STA 706 - RIGHT SIDE - HIGH FREQUENCY EDDY
CURRENT (HFEC) AND DETAILED INSPECTIONS [Group 3] ............... 6 4
FIGURE 5: STUB BEAM WEBS AT STA 685 AND STA 706 - LEFT SIDE - HIGH FREQUENCY EDDY
CURRENT (HFEC) AND DETAILED INSPECTIONS [Group 4, 6] .............. 6 6
FIGURE 6: STUB BEAM WEBS AT STA 685 AND STA 706 - RIGHT SIDE - HIGH FREQUENCY EDDY
CURRENT (HFEC) AND DETAILED INSPECTIONS [Group 4, 6] .............. 6 9
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
3 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 4

FIGURE 7: STUB BEAM WEBS AT STA 685 AND STA 706 - LEFT SIDE - HIGH FREQUENCY EDDY
CURRENT (HFEC) AND DETAILED INSPECTIONS [Group 5] ............... 7 2
FIGURE 8: STUB BEAM WEBS AT STA 685 AND STA 706 - RIGHT SIDE - HIGH FREQUENCY EDDY
CURRENT (HFEC) AND DETAILED INSPECTIONS [Group 5] ............... 7 5
FIGURE 9: STUB BEAM WEBS AT STA 685 AND STA 706 - GENERAL VISUAL INSPECTION FOR ANY
EXISTING REPAIR [Group 2-6] ................................ 7 8
FIGURE 10: STUB BEAM WEBS AT STA 685 AND STA 706 - LEFT SIDE - HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPECTION OF THE CRITICAL FASTENER ROW [Group 2-6] . . . 81
FIGURE 11: STUB BEAM WEBS AT STA 685 AND STA 706 - RIGHT SIDE - HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPECTION OF THE CRITICAL FASTENER ROW [Group 2-6] . . . 84
FIGURE 12: STUB BEAM WEB AT STA 695 - LEFT SIDE - HIGH FREQUENCY EDDY CURRENT (HFEC)
AND DETAILED INSPECTIONS [Group 2] .......................... 8 7
FIGURE 13: STUB BEAM WEB AT STA 695 - RIGHT SIDE - DETAILED INSPECTION [Group 2] . . . 89
FIGURE 14: STUB BEAM WEB AT STA 695 - LEFT SIDE - DETAILED INSPECTION [Group 3] .... 9 1
FIGURE 15: STUB BEAM WEB AT STA 695 - RIGHT SIDE - DETAILED INSPECTION [Group 3] . . . 93
FIGURE 16: STUB BEAM WEB AT STA 695 - LEFT SIDE - HIGH FREQUENCY EDDY CURRENT (HFEC)
AND DETAILED INSPECTIONS [Group 4, 6] ......................... 9 5
FIGURE 17: STUB BEAM WEB AT STA 695 - RIGHT SIDE - HIGH FREQUENCY EDDY CURRENT (HFEC)
AND DETAILED INSPECTIONS [Group 4, 6] ......................... 9 7
FIGURE 18: STUB BEAM WEB AT STA 695 - LEFT SIDE - DETAILED INSPECTION [Group 5] .... 9 9
FIGURE 19: STUB BEAM WEB AT STA 695 - RIGHT SIDE - DETAILED INSPECTION [Group 5] . . 101
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: HIGH FREQUENCY
EDDY CURRENT (HFEC) AND DETAILED INSPECTIONS FOR ANY CRACK IN THE STA
685 AND STA 706 STUB BEAM WEBS [Group 2-3] .................... 1 0 3
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 2: GENERAL VISUAL
INSPECTION FOR ANY EXISTING REPAIR AND HIGH FREQUENCY EDDY CURRENT
(HFEC) INSPECTION FOR ANY CRACK IN THE STA 685 AND STA 706 STUB BEAM WEBS
IN REPAIRED AREAS [Group 2-3] ............................. 1 0 5
APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 3: HIGH FREQUENCY
EDDY CURRENT (HFEC) INSPECTION FOR ANY CRACK IN THE STA 685 AND STA 706
STUB BEAM WEBS [Group 4-6] ............................... 1 0 8
APPENDIX D: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 4: GENERAL VISUAL
INSPECTION FOR ANY EXISTING REPAIR AND HIGH FREQUENCY EDDY CURRENT
(HFEC) INSPECTION FOR ANY CRACK IN THE STA 685 AND STA 706 STUB BEAM WEBS
IN REPAIRED AREAS [Group 4-6] ............................. 1 1 0
APPENDIX E: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 5: HIGH FREQUENCY
EDDY CURRENT (HFEC) AND DETAILED INSPECTIONS FOR ANY CRACK IN THE STA
695 STUB BEAM WEB [Group 2-6] ............................. 1 1 3
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
4 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 5

Commercial 
Airplanes
737
Service Bulletin
ALERT
SummaryNumber: 737-53A1364Original Issue: May 24, 2017
ATA System: 5311
SUBJECT: FUSELAGE- Frames and Bulkheads - Body Stations 685, 695, and 706 - Stub Beam
Web Inspection and Repair
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Accomplishment of this service bulletin will detect cracks that may have formed in the fuselage stub beam webs
below the passenger floor at Body Stations (STA) 685, STA 695, and STA 706, left and right sides. Stub beam
webs at STA 685, STA 695, and STA 706 have been identified as susceptible to cracking, if not corrected, cracks
in three adjacent stub beam webs could adversely affect the structural integrity of the airplane.
Boeing has received reports of cracking in the webs of the stub beams at STA 685, STA 695, and STA 706.
Cracks found in the STA 685, STA 695, and STA 706 stub beams are a result of fatigue caused by cyclical
loading from pressurization, wing and landing loads. The cracks can lead to the loss of structural integrity of the
airframe during flight, collapse of the main landing gear, and/or failure of the pressure deck if left undetected.
Cracks have occurred in the stub beam webs at STA 685 on the left and right sides of airplanes, with total flight
cycles ranging between 21,673 and 45,892 at the time of the crack finding. Cracks have occurred in the stub
beam webs at STA 695 on the left and right sides of airplanes, with total flight cycles ranging between 49,572
and 56,712 at the time of crack finding. Cracks have also occurred in the stub beam webs at STA 706 on the
left and right sides of airplanes with total flight cycles ranging between 12,017 and 64,392 at the time of crack
finding.
Boeing Fleet Team Digest (FTD) 737 FTD 53-15003 is related to this service bulletin.
Boeing Service Related Problem (SRP) 737-SRP-53-0514 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
5 of 114

### Page 6

ReferenceAffectedPlanning Data
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedNoPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
NoOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION
Group 1:
The Boeing Company endorses the new FAA rules related to Limit of Validity (LOV) and recommends immediate
and permanent removal from service of any airplanes upon reaching the LOV, whether or not it is operated
under FAA jurisdiction. As such, The Boeing Company no longer provides maintenance instructions for airplanes
that have accumulated flight cycles beyond the LOV. Airplanes in Group 1 (line number 1-291) have accumulated
flight cycles beyond the LOV of the maintenance program. 14 CFR 121.1115 and 129.115 prohibit operation of
an airplane beyond its LOV.
Group 2:
Do a High Frequency Eddy Current (HFEC) surface inspection for any crack in the STA 685 and STA 706 stub
beam webs at the lower inboard notch at Left Buttock Line (LBL) 45 and Right Buttock Line (RBL) 45 and at the
penetration holes between LBL 45 and LBL 60, and RBL 45 and RBL 60. Do a HFEC surface inspection for any
crack in the STA 695 stub beam web at the penetration holes between LBL 45 and LBL 60. Do a detailed
inspection for any crack in the STA 685, STA 695, and STA 706 stub beam webs at all fastener locations, tooling
holes and penetration holes on the left side and right side. If any crack is found in any of the STA 685, STA 695,
or STA 706 stub beam webs, contact The Boeing Company for the repair instructions and do the repair, and
repeat the inspection at all unrepaired stub beam webs at the repeat interval specified in Paragraph 1.E.,
Compliance. If no crack is found, repeat the inspection at all unrepaired stub beam webs at the repeat interval
specified in Paragraph 1.E., Compliance.
Group 2:
Do a general visual inspection for any existing repair on the STA 685 and STA 706 stub beam webs. If any
approved existing repair is found that meets the criteria in PART 3 in Paragraph 3.B., Work Instructions, do a
High Frequency Eddy Current (HFEC) surface inspection of the critical fastener row in stub beam web common
to the structural filler in the STA 685 and STA 706 stub beam webs for any crack. If an approved existing repair
is found that does not meet the criteria in PART 3 in Paragraph 3.B., Work Instructions, contact The Boeing
Company for repair instructions and do the repair, and repeat the general visual inspection for any existing
repair, at unrepaired locations, at the repeat interval specified in Paragraph 1.E., Compliance. If any existing
repair is found not approved by Boeing, contact The Boeing Company for repair instructions and do the repair,
and repeat the general visual inspection for any existing repair, at unrepaired locations, at the repeat interval
specified in Paragraph 1.E., Compliance. If no existing repair is found, repeat the general visual inspection for
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
6 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 7

any existing repair at the repeat interval specified in Paragraph 1.E., Compliance. If any crack is found during
HFEC inspections of the critical row fasteners, contact The Boeing Company for repair instructions and do the
repair, repeat the HFEC inspections of the critical row fasteners at locations where no crack was found at the
repeat interval specified in Paragraph 1.E., Compliance, and repeat the general visual inspection for any existing
repair, at unrepaired locations, at the repeat interval specified in Paragraph 1.E., Compliance. If no crack is
found, repeat HFEC surface inspection of the critical fastener row in stub beam web common to the structural
filler in the STA 685 and STA 706 stub beam webs for any crack at the repeat interval specified in Paragraph
1.E., Compliance.
Group 3:
Do a High Frequency Eddy Current (HFEC) surface inspection for any crack in the STA 685 and STA 706 stub
beam webs at the penetration hole between Left Buttock Line (LBL) 45 and LBL 60, and Right Buttock Line
(RBL) 45 and RBL 60. Do a detailed inspection for any crack in the STA 685, STA 695, and STA 706 stub beam
webs at all fastener locations, tooling holes and penetration holes on the left side and right side. If any crack is
found in any of the STA 685, STA 695, or STA 706 stub beam webs contact The Boeing Company for repair
instructions and do the repair, and repeat the inspection at all unrepaired stub beam webs at the repeat interval
specified in Paragraph 1.E., Compliance. If no crack is found, repeat the inspection at all unrepaired stub beam
webs at the repeat interval specified in Paragraph 1.E., Compliance.
Group 3:
Do a general visual inspection for any existing repair on the STA 685 and STA 706 stub beam webs. If any
approved existing repair is found that meets the criteria in PART 3 in Paragraph 3.B., Work Instructions, do a
High Frequency Eddy Current (HFEC) surface inspection of the critical fastener row in stub beam web common
to the structural filler in the STA 685 and STA 706 stub beam webs for any crack. If an approved existing repair
is found that does not meet the criteria in PART 3 in Paragraph 3.B., Work Instructions, contact The Boeing
Company for repair instructions and do the repair, and repeat the general visual inspection for any existing
repair, at unrepaired locations, at the repeat interval specified in Paragraph 1.E., Compliance. If any existing
repair is found not approved by Boeing, contact The Boeing Company for repair instructions and do the repair,
and repeat the general visual inspection for any existing repair, at unrepaired locations, at the repeat interval
specified in Paragraph 1.E., Compliance. If no existing repair is found, repeat the general visual inspection for
any existing repair at the repeat interval specified in Paragraph 1.E., Compliance. If any crack is found during
HFEC inspections of the critical row fasteners, contact The Boeing Company for repair instructions and do the
repair, repeat the HFEC inspections of the critical row fasteners at locations where no crack was found at the
repeat interval specified in Paragraph 1.E., Compliance, and repeat the general visual inspection for any existing
repair, at unrepaired locations, at the repeat interval specified in Paragraph 1.E., Compliance. If no crack is
found, repeat HFEC surface inspection of the critical fastener row in stub beam web common to the structural
filler in the STA 685 and STA 706 stub beam webs for any crack at the repeat interval specified in Paragraph
1.E., Compliance.
Group 4, 6:
Do a High Frequency Eddy Current (HFEC) surface inspection for any crack in the STA 685 and STA 706 stub
beam webs at the lower inboard notch at Left Buttock Line (LBL) 45 and Right Buttock Line (RBL) 45 and at the
penetration holes between LBL 45 and LBL 60, and RBL 45 and RBL 60. Do a HFEC surface inspection for any
crack in the STA 695 stub beam web at the penetration holes between LBL 45 and LBL 60, and RBL 45 and
RBL 60. Do a detailed inspection for any crack in the STA 685, STA 695, and STA 706 stub beam webs at all
fastener locations, tooling holes and penetration holes on the left side and right side. If no crack is found, repeat
the inspection at areas with approved existing repairs at the repeat interval specified in Paragraph 1.E.,
Compliance. If any crack is found in any of the STA 685 or STA 706 stub beam webs at the lower inboard notch,
refer to 737-300 SRM 53-00-07, Repair 21 or 737-500 SRM 53-00-07, Repair 21 for the trim out allowance. If
the crack in the stub beam does not exceed the trim out allowance specified in the SRM, repair the stub beam
web in accordance with 737-300 SRM 53-00-07, Repair 21 or 737-500 SRM 53-00-07, Repair 21, and repeat
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
7 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 8

the inspection for any crack, at the repeat interval specified in Paragraph 1.E., Compliance. If the crack in the
stub beam exceeds the trim out allowance of the SRM, contact The Boeing Company for repair instructions and
do the repair, and repeat the inspection for any crack, at unrepaired locations, at the repeat interval specified
in Paragraph 1.E., Compliance. If any crack is found outside the stub beam webs outside the lower inboard
notch, contact The Boeing Company for repair instructions and do the repair.
Group 4, 6:
Do a general visual inspection for any existing repair on the STA 685 and STA 706 stub beam webs. If any
approved existing repair is found that meets the criteria in PART 3 in Paragraph 3.B., Work Instructions, do a
High Frequency Eddy Current (HFEC) surface inspection of the critical fastener row in stub beam web common
to the structural filler in the STA 685 and STA 706 stub beam webs for any crack. If an approved existing repair
is found that does not meet the criteria in PART 3 in Paragraph 3.B., Work Instructions, contact The Boeing
Company for repair instructions and do the repair, and repeat the general visual inspection for any existing
repair, at unrepaired locations, at the repeat interval specified in Paragraph 1.E., Compliance. If any existing
repair is found not approved by Boeing, contact The Boeing Company for repair instructions and do the repair,
and repeat the general visual inspection for any existing repair, at unrepaired locations, at the repeat interval
specified in Paragraph 1.E., Compliance. If no existing repair is found, repeat the general visual inspection for
any existing repair at the repeat interval specified in Paragraph 1.E., Compliance. If any crack is found during
HFEC inspections of the critical row fasteners, contact The Boeing Company for repair instructions and do the
repair, repeat the HFEC inspections of the critical row fasteners at locations where no crack was found at the
repeat interval specified in Paragraph 1.E., Compliance, and repeat the general visual inspection for any existing
repair, at unrepaired locations, at the repeat interval specified in Paragraph 1.E., Compliance. If no crack is
found, repeat HFEC surface inspection of the critical fastener row in stub beam web common to the structural
filler in the STA 685 and STA 706 stub beam webs for any crack at the repeat interval specified in Paragraph
1.E., Compliance.
Group 5:
Do a High Frequency Eddy Current (HFEC) surface inspection for any crack in the STA 685 and STA 706 stub
beam webs at the lower inboard notch at Left Buttock Line (LBL) 45 and Right Buttock Line (RBL) 45 and at the
penetration holes between LBL 45 and LBL 60, and RBL 45 and RBL 60. Do a detailed inspection for any crack
in the STA 685, STA 695, and STA 706 stub beam webs at all fastener locations, tooling holes and penetration
holes on the left side and right side. If no crack is found, repeat the inspection at areas with approved existing
repairs at the repeat interval specified in Paragraph 1.E., Compliance. If any crack is found in any of the STA
685 or STA 706 stub beam webs at the lower inboard notch, refer to 737-300 SRM 53-00-07, Repair 21 or
737-500 SRM 53-00-07, Repair 21 for the trim out allowance. If the crack in the stub beam does not exceed the
trim out allowance specified in the SRM, repair the stub beam web in accordance with 737-300 SRM 53-00-07,
Repair 21 or 737-500 SRM 53-00-07, Repair 21, and repeat the inspection for any crack, at the repeat interval
specified in Paragraph 1.E., Compliance. If the crack in the stub beam exceeds the trim out allowance of the
SRM, contact The Boeing Company for repair instructions and do the repair, and repeat the inspection for any
crack, at unrepaired locations, at the repeat interval specified in Paragraph 1.E., Compliance. If any crack is
found outside the stub beam webs outside the lower inboard notch, contact The Boeing Company for repair
instructions and do the repair.
Group 5:
Do a general visual inspection for any existing repair on the STA 685 and STA 706 stub beam webs. If any
approved existing repair is found that meets the criteria in PART 3 in Paragraph 3.B., Work Instructions, do a
High Frequency Eddy Current (HFEC) surface inspection of the critical fastener row in stub beam web common
to the structural filler in the STA 685 and STA 706 stub beam webs for any crack. If an approved existing repair
is found that does not meet the criteria in PART 3 in Paragraph 3.B., Work Instructions, contact The Boeing
Company for repair instructions and do the repair, and repeat the general visual inspection for any existing
repair, at unrepaired locations, at the repeat interval specified in Paragraph 1.E., Compliance. If any existing
repair is found not approved by Boeing, contact The Boeing Company for repair instructions and do the repair,
and repeat the general visual inspection for any existing repair, at unrepaired locations, at the repeat interval
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
8 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 9

specified in Paragraph 1.E., Compliance. If no existing repair is found, repeat the general visual inspection for
any existing repair at the repeat interval specified in Paragraph 1.E., Compliance. If any crack is found during
HFEC inspections of the critical row fasteners, contact The Boeing Company for repair instructions and do the
repair, repeat the HFEC inspections of the critical row fasteners at locations where no crack was found at the
repeat interval specified in Paragraph 1.E., Compliance, and repeat the general visual inspection for any existing
repair, at unrepaired locations, at the repeat interval specified in Paragraph 1.E., Compliance. If no crack is
found, repeat HFEC surface inspection of the critical fastener row in stub beam web common to the structural
filler in the STA 685 and STA 706 stub beam webs for any crack at the repeat interval specified in Paragraph
1.E., Compliance.
EFFECTIVITY
All 737-100/200/200C/300/400/500 Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected
airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection, and/or repair procedures given in this service
bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
9 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 10 (OCR)

BOEING SERVICE BULLETIN 737-53A1364
ALERT  ALERT
STA 695
STA 706 STA 685
STA  STA  STA
706  695  685
STA 695
STUB BEAM
STA 706
STUB BEAM
STA 685
STUB BEAM
LBL 45.57
LONGITUDINAL  2534757
LEFT SIDE SHOWN, RIGHT SIDE SIMILAR  FLOOR BEAM
Original Issue: May 24, 2017
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-53A1364
Work - See page 1 for details.  10 of 114

### Page 11 (OCR)

BOEING SERVICE BULLETIN 737-53A1364
ALERT  ALERT
DO A HIGH FREQUENCY
- FRAME  FUSELAGE  57.48  LBL  CRACK  EDDY CURRENT (HFEC)  INSPECTION FOR ANY  45.57  LBL
WL
208.10
STUB BEAM
WEB
INBD  TYPICAL CRACK
STA 685 SHOWN
STA 706 SIMILAR
(VIEW LOOKING FWD)  DO A DETAILED AND
HIGH FREQUENCY
EDDY CURRENT (HFEC)
INSPECTION FOR ANY
FUSELAGE  CRACK
FRAME
LBL  LBL
57.48  45.57
WL
208.10
+++++
TYPICAL  STUB BEAM
CRACK  NBD  WEB
STA 695
(VIEW LOOKING FWD)
2534753
Original Issue: May 24, 2017
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  737-53A1364
Work - See page 1 for details.  11 of 114

### Page 12

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
12 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT
BLANK PAGE

### Page 13

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-53A1364
Original Issue: May 24, 2017
ATA System: 5311
SUBJECT: FUSELAGE- Frames and Bulkheads - Body Stations 685, 695, and 706 - Stub Beam
Web Inspection and Repair
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is applicable to all 737-100/-200/-200C/-300/-400/-500 Airplanes, in six groups.
Refer to Service Bulletin Index D6-19567 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP
737-100/200/200C Airplanes, Line numbers 1 to 291.-1
737-200 Airplanes, Line Numbers 292 through 1585.-2
737-200C Airplanes, Line Numbers 294 through 1113.-3
737-300 Airplanes, Line Numbers 1001 through 3130.-4
737-400 Airplanes, Line Numbers 1487 through 3132.-5
737-500 Airplanes, Line Numbers 1718 through 3116.-6
Airplane Models:
737-100, 737-200, 737-200C, 737-300, 737-400, 737-500
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
13 of 114

### Page 14

GroupVariable Number
1PA001 - PA022
1PA099
1PA231 - PA232
1PC001 - PC005
1PG001 - PG075
1PG199
1PG201 - PG230
1PG251 - PG255
1PG271 - PG279
1PG301 - PG314
1PG331 - PG332
1PG351 - PG356
1PG375
1PG401 - PG403
1PG431 - PG442
1PG471 - PG475
1PG501 - PG505
1PG571 - PG583
2PG584 - PG586
1PG621 - PG630
1PG651 - PG652
1PG701 - PG705
2PH001
2PH011 - PH013
2PH021 - PH024
1PH701 - PH715
1PH731 - PH732
1PH741 - PH742
2PH743
1PJ001 - PJ002
2PJ003 - PJ009
1PJ031 - PJ032
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
14 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 15

GroupVariable Number
1PJ071 - PJ072
1PJ101 - PJ104
2PJ105 - PJ119
2PJ201 - PJ219
5PJ301 - PJ302
5PJ551 - PJ561
5PJ601 - PJ615
5PJ811
5PJ816 - PJ817
2PK026 - PK029
2PK041 - PK053
2PK061 - PK070
2PK081 - PK082
2PK091 - PK099
2PK101 - PK103
2PK111 - PK120
2PK141 - PK146
2PK201 - PK204
2PK211 - PK223
2PK231 - PK241
2PK251 - PK258
2PK271 - PK274
2PK281 - PK289
2PK291
2PK301 - PK318
2PK341
2PK351 - PK361
2PK391
2PK431 - PK433
2PK451 - PK452
2PK461 - PK469
2PK495
2PK501 - PK504
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
15 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 16

GroupVariable Number
2PK511 - PK515
2PK519
2PK521 - PK528
2PK541 - PK565
2PK581
2PK591 - PK599
2PK601 - PK617
2PK621 - PK637
2PK641 - PK642
2PK661 - PK666
2PK671 - PK681
2PK691 - PK697
2PK711 - PK716
2PK731 - PK765
2PK771 - PK779
2PK801 - PK804
2PK819 - PK827
2PK830
2PK861 - PK863
2PK871 - PK874
2PK881 - PK884
2PK901 - PK938
2PK971 - PK974
2PL001 - PL028
2PL061
2PL081
2PL101 - PL113
2PL151
2PL171 - PL172
2PL201 - PL203
2PL221
2PL401 - PL417
2PL421
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
16 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 17

GroupVariable Number
2PL441
2PL451 - PL456
2PL471
2PL491
2PL501 - PL506
2PL551 - PL562
2PL581
2PL601 - PL603
2PL611
2PL621 - PL626
2PL631 - PL632
1PL711 - PL712
1PL716
2PL717 - PL747
2PL756
2PL758
2PL761 - PL770
2PL781 - PL788
2PL793
1PL801 - PL803
2PM001 - PM006
2PM016 - PM017
2PM021 - PM023
2PM051 - PM066
2PM101 - PM119
2PM141 - PM142
2PM171
2PM181
2PM251 - PM255
2PM281 - PM283
4PM381 - PM399
4PM401 - PM417
4PM541 - PM550
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
17 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 18

GroupVariable Number
5PM551 - PM564
2PN001 - PN002
2PN021 - PN043
2PN081 - PN086
2PN101 - PN117
2PN131 - PN163
2PN401 - PN420
2PN431 - PN433
2PN451 - PN456
2PN471 - PN474
2PN481
2PN491 - PN493
2PN501 - PN502
2PN511 - PN512
2PN521
4PP001 - PP054
4PP101 - PP169
4PP181 - PP199
4PP201 - PP205
4PP221
4PP231 - PP243
4PP281 - PP286
4PP301 - PP305
4PP351 - PP353
4PP376 - PP384
4PP391 - PP393
4PP401 - PP440
4PP471 - PP475
4PP501 - PP522
4PP631 - PP634
4PP651 - PP652
4PP671 - PP699
4PP701 - PP733
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
18 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 19

GroupVariable Number
4PP771 - PP779
4PP801 - PP808
4PP821 - PP827
4PP831 - PP848
4PP851 - PP852
4PP861 - PP877
4PP891 - PP899
4PP901 - PP936
4PP946 - PP948
4PP951 - PP952
4PP961 - PP967
4PP981 - PP991
4PP993
4PQ001 - PQ016
4PQ026 - PQ041
4PQ051 - PQ092
4PQ101 - PQ199
4PQ201 - PQ202
4PQ221 - PQ237
4PQ241 - PQ243
4PQ251 - PQ267
4PQ281 - PQ299
4PQ301 - PQ307
4PQ331 - PQ332
4PQ341 - PQ348
4PQ361 - PQ373
4PQ391 - PQ395
4PQ401 - PQ418
4PQ421
4PQ431 - PQ438
4PQ447 - PQ448
4PQ451
4PQ454
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
19 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 20

GroupVariable Number
4PQ471 - PQ475
4PQ479 - PQ481
4PQ486 - PQ487
4PQ491 - PQ493
4PQ771 - PQ772
4PQ791 - PQ793
4PQ801 - PQ805
4PQ931 - PQ935
4PQ951
4PQ971 - PQ997
4PR001 - PR017
4PR021 - PR034
4PR041 - PR045
4PR061 - PR072
4PR077 - PR082
4PR091 - PR092
4PR096
4PR101
4PR121 - PR122
4PR131 - PR132
4PR141 - PR143
4PR161 - PR172
4PR181
4PS601 - PS631
4PS636 - PS638
4PS641 - PS644
4PS651 - PS657
4PS666 - PS669
4PS691 - PS692
4PS701 - PS706
4PS751 - PS799
4PS811
4PS836 - PS837
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
20 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 21

GroupVariable Number
4PS841 - PS846
4PS851 - PS852
4PS856
4PS861 - PS863
4PS866 - PS868
4PS871 - PS874
4PS896 - PS897
4PS901 - PS941
4PS956 - PS957
4PS961 - PS963
4PS971 - PS978
6PT001 - PT015
6PT021 - PT031
6PT041 - PT064
6PT101 - PT105
6PT121 - PT138
6PT146 - PT148
6PT161 - PT170
6PT181 - PT188
6PT211 - PT220
6PT295
6PT301 - PT309
6PT331 - PT360
6PT381 - PT399
6PT401 - PT438
6PT501 - PT517
6PT561 - PT565
6PT581 - PT586
6PT611 - PT621
6PT641 - PT644
6PT651 - PT656
6PT671 - PT672
6PT681 - PT685
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
21 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 22

GroupVariable Number
6PT701 - PT703
6PT716 - PT717
6PT721 - PT725
6PT801 - PT834
6PT851 - PT854
6PT871 - PT886
6PT901 - PT930
6PT971 - PT973
6PT981 - PT985
6PT996
6PU001 - PU025
6PU301
6PU311 - PU313
5PV001 - PV055
5PV201 - PV209
5PV226 - PV229
5PV231 - PV237
5PV271 - PV272
5PV281 - PV287
5PV296
5PV301 - PV302
5PV351
5PV356 - PV357
5PW001 - PW054
5PW061 - PW068
5PW072
5PW086 - PW088
5PW091 - PW094
5PW101 - PW102
5PW106
5PW111 - PW120
5PW156 - PW157
5PW161 - PW171
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
22 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 23

GroupVariable Number
5PW201 - PW252
5PW261 - PW268
5PW271 - PW276
5PW278
5PW281 - PW293
5PW296
5PW301 - PW327
5PW401 - PW408
5PW411 - PW418
5PW421 - PW424
5PW431 - PW435
5PW441 - PW450
5PW461 - PW467
5PW501 - PW504
5PW511 - PW522
5PW524 - PW550
5PW556 - PW557
5PW561 - PW564
5PW571 - PW576
5PW591 - PW596
5PW611 - PW622
5PW631 - PW637
5PW661 - PW662
5PW681 - PW683
5PW701 - PW702
5PW711 - PW717
5PW741 - PW742
5PW761
5PW771
5PW831
5PW851 - PW856
1PX071
1PX701
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
23 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 24

GroupVariable Number
1PY001 - PY008
1PY021
3PY022
1PY031
3PY036 - PY037
3PY046 - PY048
3PY051 - PY053
3PY056 - PY057
3PY101 - PY103
3PY111 - PY113
3PY131 - PY135
3PY141 - PY143
3PY151 - PY154
3PY156 - PY157
3PY161 - PY162
3PY166
3PY191
3PY201
3PY221 - PY222
3PY231
3PY241 - PY244
3PY270 - PY275
3PY281
3PY286
1PY301 - PY304
1PY321 - PY323
1PY341 - PY346
1PY361 - PY362
1PY381
3PY401
3PY409 - PY411
3PY421 - PY422
3PY441
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
24 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 25

GroupVariable Number
3PY451
3PY461 - PY463
3PY591 - PY595
3PY611 - PY612
3PY621
3PY631
3PY651
3PY671 - PY672
3PY721
3PY741
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
Accomplishment of this service bulletin will detect cracks that may have formed in the fuselage stub
beam webs below the passenger floor at Body Station (STA) 685, STA 695, and STA 706, left and
right sides. Stub beam webs at STA 685, STA 695, and STA 706 have been identified as susceptible
to cracking, if not corrected, cracks in three adjacent stub beam webs could adversely affect the
structural integrity of the airplane.
Boeing has received reports of cracking in the webs of the stub beams at STA 685, STA 695, and STA
706. Cracks found in the STA 685, STA 695, and STA 706 stub beams are a result of fatigue caused
by cyclical loading from pressurization, wing and landing loads. The cracks can lead to the loss of
structural integrity of the airframe during flight, collapse of the main landing gear, and/or failure of the
pressure deck if left undetected. Cracks have occurred in the stub beam webs at STA 685 on the left
and right sides of airplanes, with total flight cycles ranging between 21,673 and 45,892 at the time of
the crack finding. Cracks have occurred in the stub beam webs at STA 695 on the left and right sides
of airplanes, with total flight cycles ranging between 49,572 and 56,712 at the time of crack finding.
Cracks have also occurred in the stub beam webs at STA 706 on the left and right sides of airplanes
with total flight cycles ranging between 12,017 and 64,392 at the time of crack finding.
Boeing Fleet Team Digest (FTD) 737 FTD 53-15003 is related to this service bulletin.
Boeing Service Related Problem (SRP) 737-SRP-53-0514 is related to this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
25 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 26

D. Description
Group 1:
The Boeing Company endorses the new FAA rules related to Limit of Validity (LOV) and recommends
immediate and permanent removal from service of any airplanes upon reaching the LOV, whether or
not it is operated under FAA jurisdiction. As such, The Boeing Company no longer provides maintenance
instructions for airplanes that have accumulated flight cycles beyond the LOV. Airplanes in Group 1
(line number 1-291) have accumulated flight cycles beyond the LOV of the maintenance program. 14
CFR 121.1115 and 129.115 prohibit operation of an airplane beyond its LOV.
Group 2:
Do a High Frequency Eddy Current (HFEC) surface inspection for any crack in the STA 685 and STA
706 stub beam webs at the lower inboard notch at Left Buttock Line (LBL) 45 and Right Buttock Line
(RBL) 45 and at the penetration holes between LBL 45 and LBL 60, and RBL 45 and RBL 60. Do a
HFEC surface inspection for any crack in the STA 695 stub beam web at the penetration holes between
LBL 45 and LBL 60. Do a detailed inspection for any crack in the STA 685, STA 695, and STA 706
stub beam webs at all fastener locations, tooling holes and penetration holes on the left side and right
side. If any crack is found in any of the STA 685, STA 695, or STA 706 stub beam webs, contact The
Boeing Company for the repair instructions and do the repair, and repeat the inspection at all unrepaired
stub beam webs at the repeat interval specified in Paragraph 1.E., Compliance. If no crack is found,
repeat the inspection at all unrepaired stub beam webs at the repeat interval specified in Paragraph
1.E., Compliance.
Group 2:
Do a general visual inspection for any existing repair on the STA 685 and STA 706 stub beam webs.
If any approved existing repair is found that meets the criteria in PART 3 in Paragraph 3.B., Work
Instructions, do a High Frequency Eddy Current (HFEC) surface inspection of the critical fastener row
in stub beam web common to the structural filler in the STA 685 and STA 706 stub beam webs for any
crack. If an approved existing repair is found that does not meet the criteria in PART 3 in Paragraph
3.B., Work Instructions, contact The Boeing Company for repair instructions and do the repair, and
repeat the general visual inspection for any existing repair, at unrepaired locations, at the repeat interval
specified in Paragraph 1.E., Compliance. If any existing repair is found not approved by Boeing, contact
The Boeing Company for repair instructions and do the repair, and repeat the general visual inspection
for any existing repair, at unrepaired locations, at the repeat interval specified in Paragraph 1.E.,
Compliance. If no existing repair is found, repeat the general visual inspection for any existing repair
at the repeat interval specified in Paragraph 1.E., Compliance. If any crack is found during HFEC
inspections of the critical row fasteners, contact The Boeing Company for repair instructions and do
the repair, repeat the HFEC inspections of the critical row fasteners at locations where no crack was
found at the repeat interval specified in Paragraph 1.E., Compliance, and repeat the general visual
inspection for any existing repair, at unrepaired locations, at the repeat interval specified in Paragraph
1.E., Compliance. If no crack is found, repeat HFEC surface inspection of the critical fastener row in
stub beam web common to the structural filler in the STA 685 and STA 706 stub beam webs for any
crack at the repeat interval specified in Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
26 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 27

Group 3:
Do a High Frequency Eddy Current (HFEC) surface inspection for any crack in the STA 685 and STA
706 stub beam webs at the penetration hole between Left Buttock Line (LBL) 45 and LBL 60, and Right
Buttock Line (RBL) 45 and RBL 60. Do a detailed inspection for any crack in the STA 685, STA 695,
and STA 706 stub beam webs at all fastener locations, tooling holes and penetration holes on the left
side and right side. If any crack is found in any of the STA 685, STA 695, or STA 706 stub beam webs
contact The Boeing Company for repair instructions and do the repair, and repeat the inspection at all
unrepaired stub beam webs at the repeat interval specified in Paragraph 1.E., Compliance. If no crack
is found, repeat the inspection at all unrepaired stub beam webs at the repeat interval specified in
Paragraph 1.E., Compliance.
Group 3:
Do a general visual inspection for any existing repair on the STA 685 and STA 706 stub beam webs.
If any approved existing repair is found that meets the criteria in PART 3 in Paragraph 3.B., Work
Instructions, do a High Frequency Eddy Current (HFEC) surface inspection of the critical fastener row
in stub beam web common to the structural filler in the STA 685 and STA 706 stub beam webs for any
crack. If an approved existing repair is found that does not meet the criteria in PART 3 in Paragraph
3.B., Work Instructions, contact The Boeing Company for repair instructions and do the repair, and
repeat the general visual inspection for any existing repair, at unrepaired locations, at the repeat interval
specified in Paragraph 1.E., Compliance. If any existing repair is found not approved by Boeing, contact
The Boeing Company for repair instructions and do the repair, and repeat the general visual inspection
for any existing repair, at unrepaired locations, at the repeat interval specified in Paragraph 1.E.,
Compliance. If no existing repair is found, repeat the general visual inspection for any existing repair
at the repeat interval specified in Paragraph 1.E., Compliance. If any crack is found during HFEC
inspections of the critical row fasteners, contact The Boeing Company for repair instructions and do
the repair, repeat the HFEC inspections of the critical row fasteners at locations where no crack was
found at the repeat interval specified in Paragraph 1.E., Compliance, and repeat the general visual
inspection for any existing repair, at unrepaired locations, at the repeat interval specified in Paragraph
1.E., Compliance. If no crack is found, repeat HFEC surface inspection of the critical fastener row in
stub beam web common to the structural filler in the STA 685 and STA 706 stub beam webs for any
crack at the repeat interval specified in Paragraph 1.E., Compliance.
Group 4, 6:
Do a High Frequency Eddy Current (HFEC) surface inspection for any crack in the STA 685 and STA
706 stub beam webs at the lower inboard notch at Left Buttock Line (LBL) 45 and Right Buttock Line
(RBL) 45 and at the penetration holes between LBL 45 and LBL 60, and RBL 45 and RBL 60. Do a
HFEC surface inspection for any crack in the STA 695 stub beam web at the penetration holes between
LBL 45 and LBL 60, and RBL 45 and RBL 60. Do a detailed inspection for any crack in the STA 685,
STA 695, and STA 706 stub beam webs at all fastener locations, tooling holes and penetration holes
on the left side and right side. If no crack is found, repeat the inspection at areas with approved existing
repairs at the repeat interval specified in Paragraph 1.E., Compliance. If any crack is found in any of
the STA 685 or STA 706 stub beam webs at the lower inboard notch, refer to 737-300 SRM 53-00-07,
Repair 21 or 737-500 SRM 53-00-07, Repair 21 for the trim out allowance. If the crack in the stub beam
does not exceed the trim out allowance specified in the SRM, repair the stub beam web in accordance
with 737-300 SRM 53-00-07, Repair 21 or 737-500 SRM 53-00-07, Repair 21, and repeat the inspection
for any crack, at the repeat interval specified in Paragraph 1.E., Compliance. If the crack in the stub
beam exceeds the trim out allowance of the SRM, contact The Boeing Company for repair instructions
and do the repair, and repeat the inspection for any crack, at unrepaired locations, at the repeat interval
specified in Paragraph 1.E., Compliance. If any crack is found outside the stub beam webs outside the
lower inboard notch, contact The Boeing Company for repair instructions and do the repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
27 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 28

Group 4, 6:
Do a general visual inspection for any existing repair on the STA 685 and STA 706 stub beam webs.
If any approved existing repair is found that meets the criteria in PART 3 in Paragraph 3.B., Work
Instructions, do a High Frequency Eddy Current (HFEC) surface inspection of the critical fastener row
in stub beam web common to the structural filler in the STA 685 and STA 706 stub beam webs for any
crack. If an approved existing repair is found that does not meet the criteria in PART 3 in Paragraph
3.B., Work Instructions, contact The Boeing Company for repair instructions and do the repair, and
repeat the general visual inspection for any existing repair, at unrepaired locations, at the repeat interval
specified in Paragraph 1.E., Compliance. If any existing repair is found not approved by Boeing, contact
The Boeing Company for repair instructions and do the repair, and repeat the general visual inspection
for any existing repair, at unrepaired locations, at the repeat interval specified in Paragraph 1.E.,
Compliance. If no existing repair is found, repeat the general visual inspection for any existing repair
at the repeat interval specified in Paragraph 1.E., Compliance. If any crack is found during HFEC
inspections of the critical row fasteners, contact The Boeing Company for repair instructions and do
the repair, repeat the HFEC inspections of the critical row fasteners at locations where no crack was
found at the repeat interval specified in Paragraph 1.E., Compliance, and repeat the general visual
inspection for any existing repair, at unrepaired locations, at the repeat interval specified in Paragraph
1.E., Compliance. If no crack is found, repeat HFEC surface inspection of the critical fastener row in
stub beam web common to the structural filler in the STA 685 and STA 706 stub beam webs for any
crack at the repeat interval specified in Paragraph 1.E., Compliance.
Group 5:
Do a High Frequency Eddy Current (HFEC) surface inspection for any crack in the STA 685 and STA
706 stub beam webs at the lower inboard notch at Left Buttock Line (LBL) 45 and Right Buttock Line
(RBL) 45 and at the penetration holes between LBL 45 and LBL 60, and RBL 45 and RBL 60. Do a
detailed inspection for any crack in the STA 685, STA 695, and STA 706 stub beam webs at all fastener
locations, tooling holes and penetration holes on the left side and right side. If no crack is found, repeat
the inspection at areas with approved existing repairs at the repeat interval specified in Paragraph 1.E.,
Compliance. If any crack is found in any of the STA 685 or STA 706 stub beam webs at the lower
inboard notch, refer to 737-300 SRM 53-00-07, Repair 21 or 737-500 SRM 53-00-07, Repair 21 for
the trim out allowance. If the crack in the stub beam does not exceed the trim out allowance specified
in the SRM, repair the stub beam web in accordance with 737-300 SRM 53-00-07, Repair 21 or 737-500
SRM 53-00-07, Repair 21, and repeat the inspection for any crack, at the repeat interval specified in
Paragraph 1.E., Compliance. If the crack in the stub beam exceeds the trim out allowance of the SRM,
contact The Boeing Company for repair instructions and do the repair, and repeat the inspection for
any crack, at unrepaired locations, at the repeat interval specified in Paragraph 1.E., Compliance. If
any crack is found outside the stub beam webs outside the lower inboard notch, contact The Boeing
Company for repair instructions and do the repair.
Group 5:
Do a general visual inspection for any existing repair on the STA 685 and STA 706 stub beam webs.
If any approved existing repair is found that meets the criteria in PART 3 in Paragraph 3.B., Work
Instructions, do a High Frequency Eddy Current (HFEC) surface inspection of the critical fastener row
in stub beam web common to the structural filler in the STA 685 and STA 706 stub beam webs for any
crack. If an approved existing repair is found that does not meet the criteria in PART 3 in Paragraph
3.B., Work Instructions, contact The Boeing Company for repair instructions and do the repair, and
repeat the general visual inspection for any existing repair, at unrepaired locations, at the repeat interval
specified in Paragraph 1.E., Compliance. If any existing repair is found not approved by Boeing, contact
The Boeing Company for repair instructions and do the repair, and repeat the general visual inspection
for any existing repair, at unrepaired locations, at the repeat interval specified in Paragraph 1.E.,
Compliance. If no existing repair is found, repeat the general visual inspection for any existing repair
at the repeat interval specified in Paragraph 1.E., Compliance. If any crack is found during HFEC
inspections of the critical row fasteners, contact The Boeing Company for repair instructions and do
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
28 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 29

the repair, repeat the HFEC inspections of the critical row fasteners at locations where no crack was
found at the repeat interval specified in Paragraph 1.E., Compliance, and repeat the general visual
inspection for any existing repair, at unrepaired locations, at the repeat interval specified in Paragraph
1.E., Compliance. If no crack is found, repeat HFEC surface inspection of the critical fastener row in
stub beam web common to the structural filler in the STA 685 and STA 706 stub beam webs for any
crack at the repeat interval specified in Paragraph 1.E., Compliance.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
2-16, 2-17737-100, 737-200, 737-200C
Group 2:
Affected Maintenance Zones
ZoneModel
2-16, 2-17737-200
Group 3:
Affected Maintenance Zones
ZoneModel
2-16, 2-17737-200C
Group 4:
Affected Maintenance Zones
ZoneModel
216, 217737-300
Group 5:
Affected Maintenance Zones
ZoneModel
216, 217737-400
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
29 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 30

Group 6:
Affected Maintenance Zones
ZoneModel
216, 217737-500
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Accomplish the required actions, based on the applicable conditions in Tables 1 through 5, in accordance
with Paragraph 3. Accomplishment Instructions.
Logic diagrams showing compliance tasks and compliance times are included as aids in APPENDIX
A, APPENDIX B, APPENDIX C, APPENDIX D and APPENDIX E.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Group 1:
The Boeing Company endorses the new FAA rules related to Limit of Validity (LOV) and recommends
immediate and permanent removal from service of any airplanes upon reaching the LOV, whether or
not it is operated under FAA jurisdiction. As such, The Boeing Company no longer provides maintenance
instructions for airplanes that have accumulated flight cycles beyond the LOV. Airplanes in Group 1
(line number 1-291) have accumulated flight cycles beyond the LOV of the maintenance program. 14
CFR 121.1115 and 129.115 prohibit operation of an airplane beyond its LOV.
Group 2-3:
Table 1: High Frequency Eddy Current (HFEC) and Detailed Inspections for Any Crack in the STA 685
and STA 706 Stub Beam Webs
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 6,000
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 9,000 to-
tal flight cycles.
Do PART 2: HIGH FRE-
QUENCY EDDY CUR-
RENT (HFEC) AND DE-
TAILED INSPECTIONS
OF THE STA 685 AND
STA 706 STUB BEAM
WEBS for any crack.
All Airplanes.
(a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
30 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 31

Group 2-3:
Table 1: High Frequency Eddy Current (HFEC) and Detailed Inspections for Any Crack in the STA 685
and STA 706 Stub Beam Webs
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.(ACTION 1): Contact The
Boeing Company for re-
pair instructions and do
the repair.
CONDITION 1: ANY
CRACK FOUND ON ANY
STUB BEAM WEB.
9,000 flight cycles.-(ACTION 2): At unre-
paired locations, repeat
PART 2: HIGH FRE-
QUENCY EDDY CUR-
RENT (HFEC) AND DE-
TAILED INSPECTIONS
OF THE STA 685 AND
STA 706 STUB BEAM
WEBS for any crack (a).
9,000 flight cycles.-Repeat PART 2: HIGH
FREQUENCY EDDY
CURRENT (HFEC) AND
DETAILED INSPEC-
TIONS OF THE STA 685
AND STA 706 STUB
BEAM WEBS for any
crack.
CONDITION 2: NO
CRACK FOUND ON ANY
STUB BEAM WEB.
(a)
(a) It is not required to do the PART 2 inspections in any area common to an existing repair. Inspections for
existing repaired areas are done in accordance with Compliance Table 2.
Group 2-3:
Table 2: General Visual Inspection for Any Existing Repair and High Frequency Eddy Current (HFEC)
Inspection for Any Crack in the STA 685 and STA 706 Stub Beam Webs In Repaired Areas
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 6,000
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 9,000 to-
tal flight cycles.
Do PART 3: GENERAL
VISUAL INSPECTION
OF THE STA 685 AND
STA 706 STUB BEAM
WEBS for any existing
repair.
All Airplanes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
31 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 32

Group 2-3:
Table 2: General Visual Inspection for Any Existing Repair and High Frequency Eddy Current (HFEC)
Inspection for Any Crack in the STA 685 and STA 706 Stub Beam Webs In Repaired Areas
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 6,000
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Within 32,000
flight cycles af-
ter the repair in-
stallation.
Do PART 4: HIGH FRE-
QUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TION OF THE CRITICAL
FASTENER ROW IN
STUB BEAM WEB COM-
MON TO THE STRUC-
TURAL FILLER for any
crack.
CONDITION 3: ANY AP-
PROVED EXISTING RE-
PAIR FOUND ON THE
STUB BEAM WEB THAT
MEETS THE CRITERIA IN
PART 3.
(a)
-Before further flight.(ACTION 1): Contact The
Boeing Company for re-
pair instructions and do
the repair.
CONDITION 3.1: ANY
CRACK FOUND IN CRITI-
CAL FASTENER ROW.
9,000 flight cycles.-(ACTION 2): At locations
with no crack found in
critical fastener row, re-
peat PART 4: HIGH
FREQUENCY EDDY
CURRENT (HFEC) IN-
SPECTION OF THE
CRITICAL FASTENER
ROW IN STUB BEAM
WEB COMMON TO THE
STRUCTURAL FILLER
for any crack.
9,000 flight cycles.-(ACTION 3): At unre-
paired locations, repeat
PART 3: GENERAL VISU-
AL INSPECTION OF
THE STA 685 AND STA
706 STUB BEAM WEBS
for any existing repair.
9,000 flight cycles.-Repeat PART 4: HIGH
FREQUENCY EDDY
CURRENT (HFEC) IN-
SPECTION OF THE
CRITICAL FASTENER
ROW IN STUB BEAM
WEB COMMON TO THE
STRUCTURAL FILLER
for any crack.
CONDITION 3.2: NO
CRACK FOUND IN CRITI-
CAL FASTENER ROW.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
32 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 33

Group 2-3:
Table 2: General Visual Inspection for Any Existing Repair and High Frequency Eddy Current (HFEC)
Inspection for Any Crack in the STA 685 and STA 706 Stub Beam Webs In Repaired Areas
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.(ACTION 1): Contact The
Boeing Company for re-
pair instructions and do
the repair.
CONDITION 4: ANY AP-
PROVED EXISTING RE-
PAIR FOUND ON THE
STUB BEAM WEB THAT
DOES NOT MEET THE
CRITERIA IN PART 3. 9,000 flight cycles.-(ACTION 2): At unre-paired locations, repeat
PART 3: GENERAL VISU-
AL INSPECTION OF
THE STA 685 AND STA
706 STUB BEAM WEBS
for any existing repair.
(a)
-Before further flight.(ACTION 1): Contact The
Boeing Company for re-
pair instructions and do
the repair.
CONDITION 5: ANY EXIST-
ING REPAIR FOUND NOT
APPROVED BY BOEING
ODA.
(a) 9,000 flight cycles.-(ACTION 2): At unre-
paired locations, repeat
PART 3: GENERAL VISU-
AL INSPECTION OF
THE STA 685 AND STA
706 STUB BEAM WEBS
for any existing repair.
9,000 flight cycles.-Repeat PART 3: GENER-
AL VISUAL INSPECTION
OF THE STA 685 AND
STA 706 STUB BEAM
WEBS for any existing
repair.
CONDITION 6: NO EXIST-
ING REPAIR FOUND.
(a) An approved repair is an installed repair that was Boeing Organization Designation Authorization (ODA)
approved via an FAA Form 8100-9.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
33 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 34

Group 4-6:
Table 3: High Frequency Eddy Current (HFEC) Inspection for Any Crack in the STA 685 and STA 706
Stub Beam Webs
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 6,000
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 9,000 to-
tal flight cycles.
Do PART 2: HIGH FRE-
QUENCY EDDY CUR-
RENT (HFEC) AND DE-
TAILED INSPECTIONS
OF THE STA 685 AND
STA 706 STUB BEAM
WEBS for any crack.
All Airplanes.
(a)
-Before further flight.(ACTION 1): Do PART 5:
STUB BEAM WEB RE-
PAIR.
CONDITION 7: ANY
CRACK FOUND ON ANY
STUB BEAM WEB THAT
CAN BE REPAIRED in ac-
cordance with 737-300
SRM 53-00-07, Repair 21
or 737-400 SRM 53-00-07,
Repair 21 or 737-500 SRM
53-00-07, Repair 21.
9,000 flight cycles.-(ACTION 2): Repeat
PART 2: HIGH FRE-
QUENCY EDDY CUR-
RENT (HFEC) AND DE-
TAILED INSPECTIONS
OF THE STA 685 AND
STA 706 STUB BEAM
WEBS for any crack.
(a)(b)
-Before further flight.(ACTION 1): Contact The
Boeing Company for re-
pair instructions and do
the repair.
CONDITION 8: ANY
CRACK FOUND ON ANY
STUB BEAM WEB THAT
CANNOT BE REPAIRED
in accordance with 737-300
SRM 53-00-07, Repair 21
or 737-400 SRM 53-00-07,
Repair 21 or 737-500 SRM
53-00-07, Repair 21.
9,000 flight cycles.-(ACTION 2): At unre-
paired locations, repeat
PART 2: HIGH FRE-
QUENCY EDDY CUR-
RENT (HFEC) AND DE-
TAILED INSPECTIONS
OF THE STA 685 AND
STA 706 STUB BEAM
WEBS for any crack.
(a)(b)
9,000 flight cycles.-Repeat PART 2: HIGH
FREQUENCY EDDY
CURRENT (HFEC) AND
DETAILED INSPEC-
TIONS OF THE STA 685
AND STA 706 STUB
BEAM WEBS for any
crack.
CONDITION 9: NO
CRACK FOUND ON ANY
STUB BEAM WEB.
(a)(b)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
34 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 35

Group 4-6:
Table 3: High Frequency Eddy Current (HFEC) Inspection for Any Crack in the STA 685 and STA 706
Stub Beam Webs
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
(a) It is not required to do the PART 2 inspections in any area common to an existing repair. Inspections for
existing repaired areas are done in accordance with Compliance Table 4.
(b) For existing repairs accomplished in accordance with 737-300 SRM 53-00-07, Repair 21 or 737-400
SRM 53-00-07, Repair 21 or 737-500 SRM 53-00-07, Repair 21, refer to the SRM for inspection require-
ments.
Group 4-6:
Table 4: General Visual Inspection for Any Existing Repair and High Frequency Eddy Current (HFEC)
Inspection for Any Crack in the STA 685 and STA 706 Stub Beam Webs In Repaired Areas
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 6,000
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 9,000 to-
tal flight cycles.
Do PART 3: GENERAL
VISUAL INSPECTION
OF THE STA 685 AND
STA 706 STUB BEAM
WEBS for any existing
repair.
All Airplanes.
(a)
-Within 6,000
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Within 32,000
flight cycles af-
ter the repair in-
stallation.
Do PART 4: HIGH FRE-
QUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TION OF THE CRITICAL
FASTENER ROW IN
STUB BEAM WEB COM-
MON TO THE STRUC-
TURAL FILLER for any
crack.
CONDITION 10: ANY AP-
PROVED EXISTING RE-
PAIR FOUND ON THE
STUB BEAM WEB THAT
MEETS THE CRITERIA IN
PART 3.
(b)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
35 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 36

Group 4-6:
Table 4: General Visual Inspection for Any Existing Repair and High Frequency Eddy Current (HFEC)
Inspection for Any Crack in the STA 685 and STA 706 Stub Beam Webs In Repaired Areas
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.(ACTION 1): Contact The
Boeing Company for re-
pair instructions and do
the repair.
CONDITION 10.1: ANY
CRACK FOUND IN CRITI-
CAL FASTENER ROW.
9,000 flight cycles.-(ACTION 2): At locations
with no crack found in
critical fastener row, re-
peat PART 4: HIGH
FREQUENCY EDDY
CURRENT (HFEC) IN-
SPECTION OF THE
CRITICAL FASTENER
ROW IN STUB BEAM
WEB COMMON TO THE
STRUCTURAL FILLER
for any crack at areas
with approved existing
repairs.
9,000 flight cycles.-(ACTION 3): At unre-
paired locations, repeat
PART 3: GENERAL VISU-
AL INSPECTION OF
THE STA 685 AND STA
706 STUB BEAM WEBS
for any existing repair.
9,000 flight cycles.-Repeat PART 4: HIGH
FREQUENCY EDDY
CURRENT (HFEC) IN-
SPECTION OF THE
CRITICAL FASTENER
ROW IN STUB BEAM
WEB COMMON TO THE
STRUCTURAL FILLER
for any crack at areas
with approved existing
repairs.
CONDITION 10.2: NO
CRACK FOUND IN CRITI-
CAL FASTENER ROW.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
36 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 37

Group 4-6:
Table 4: General Visual Inspection for Any Existing Repair and High Frequency Eddy Current (HFEC)
Inspection for Any Crack in the STA 685 and STA 706 Stub Beam Webs In Repaired Areas
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.(ACTION 1): Contact The
Boeing Company for re-
pair instructions and do
the repair.
CONDITION 11: ANY AP-
PROVED EXISTING RE-
PAIR FOUND ON THE
STUB BEAM WEB THAT
DOES NOT MEET THE
CRITERIA IN PART 3,
AND WAS NOT ACCOM-
PLISHED in accordance
with 737-300 SRM 53-00-
07, Repair 21 or 737-400
SRM 53-00-07, Repair 21
or 737-500 SRM 53-00-07,
Repair 21.
9,000 flight cycles.-(ACTION 2): At unre-
paired locations, repeat
PART 3: GENERAL VISU-
AL INSPECTION OF
THE STA 685 AND STA
706 STUB BEAM WEBS
for any existing repair.
(b)
-Before further flight.(ACTION 1): Contact The
Boeing Company for re-
pair instructions and do
the repair.
CONDITION 12: ANY EX-
ISTING REPAIR FOUND
NOT APPROVED BY
BOEING ODA.
(b) 9,000 flight cycles.-(ACTION 2): At unre-
paired locations, repeat
PART 3: GENERAL VISU-
AL INSPECTION OF
THE STA 685 AND STA
706 STUB BEAM WEBS
for any existing repair.
9,000 flight cycles.-Repeat PART 3: GENER-
AL VISUAL INSPECTION
OF THE STA 685 AND
STA 706 STUB BEAM
WEBS for any existing
repair.
CONDITION 13: NO EXIST-
ING REPAIR FOUND.
(a) For repairs accomplished in accordance with 737-300 SRM 53-00-07, Repair 21 or 737-400 SRM 53-00-
07, Repair 21 or 737-500 SRM 53-00-07, Repair 21, refer to the SRM for inspection requirements.
(b) An approved repair is an installed repair that was Boeing Organization Designation Authorization (ODA)
approved via an FAA Form 8100-9.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
37 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 38

Group 2-6:
Table 5: High Frequency Eddy Current (HFEC) and Detailed Inspections for Any Crack in the STA 695
Stub Beam Web
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 6,000
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 9,000 to-
tal flight cycles.
Do PART 6: HIGH FRE-
QUENCY EDDY CUR-
RENT (HFEC) AND DE-
TAILED INSPECTIONS
OF THE STA 695 STUB
BEAM WEB for any
crack.
All Airplanes.
-Before further flight.(ACTION 1): Contact The
Boeing Company for re-
pair instructions and do
the repair.
CONDITION 14: ANY
CRACK FOUND ON ANY
STUB BEAM WEB.
9,000 flight cycles.-(ACTION 2): At unre-
paired locations, repeat
PART 6: HIGH FRE-
QUENCY EDDY CUR-
RENT (HFEC) AND DE-
TAILED INSPECTIONS
OF THE STA 695 STUB
BEAM WEB for any
crack.
9,000 flight cycles.-Repeat PART 6: HIGH
FREQUENCY EDDY
CURRENT (HFEC) AND
DETAILED INSPEC-
TIONS OF THE STA 695
STUB BEAM WEB for
any crack.
CONDITION 15: NO
CRACK FOUND ON ANY
STUB BEAM WEB.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
38 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 39

G. Manpower
The table below shows an estimate of the task hours necessary to do this inspection for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools
Group 2:
Elapsed HoursTask HoursNumber of PersonsTask
1.503.002Open Access
1.501.501FIGURE 1
1.501.501FIGURE 2
0.500.501FIGURE 9
0.750.751FIGURE 10
0.750.751FIGURE 11
0.750.751FIGURE 12
0.750.751FIGURE 13
1.503.002Close Access
9.5012.50TOTAL FOR EACH AIRPLANE
Group 3:
Elapsed HoursTask HoursNumber of PersonsTask
1.503.002Open Access
1.001.001FIGURE 3
1.001.001FIGURE 4
0.500.501FIGURE 9
0.750.751FIGURE 10
0.750.751FIGURE 11
0.250.251FIGURE 14
0.250.251FIGURE 15
1.503.002Close Access
7.5010.50TOTAL FOR EACH AIRPLANE
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
39 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 40

Group 4, 6:
Elapsed HoursTask HoursNumber of PersonsTask
1.503.002Open Access
1.501.501FIGURE 5
1.501.501FIGURE 6
0.500.501FIGURE 9
0.750.751FIGURE 10
0.750.751FIGURE 11
0.750.751FIGURE 16
0.750.751FIGURE 17
1.503.002Close Access
9.5012.50TOTAL FOR EACH AIRPLANE
Group 5:
Elapsed HoursTask HoursNumber of PersonsTask
1.503.002Open Access
1.501.501FIGURE 7
1.501.501FIGURE 8
0.500.501FIGURE 9
0.750.751FIGURE 10
0.750.751FIGURE 11
0.250.251FIGURE 18
0.250.251FIGURE 19
1.503.002Close Access
8.5011.50TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not applicable.
J. References
1. Existing Data:
a. Boeing Service Related Problem (SRP) 737-SRP-53-0514
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
40 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 41

b. Service Bulletin Index D6-19567
c. Boeing Fleet Team Digest (FTD) 737 FTD 53-15003
d. 737 Non-Destructive Testing (NDT) Manual Part 6, 51-00-00
e. 737-100/200 Aircraft Maintenance Manual (AMM) 25-21-00, 25-21-21, 25-21-311, 25-21-346,
25-22-00, 25-27-100, 27-09-11, 53-21-00
f. 737-300/400/500 Aircraft Maintenance Manual (AMM) 25-21-46, 25-22-00, 25-27-15, 27-09-11,
53-21-00
g. 737-300 Structural Repair Manual (SRM) 53-00-07, Repair 21
h. 737-400 Structural Repair Manual (SRM) 53-00-07, Repair 21
i. 737-500 Structural Repair Manual (SRM) 53-00-07, Repair 21
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
FRAME INSTL- SIDE STRUT SUPPORT, STA 68565-46543
FRAME INSTL- LOWER, STA 69565-46544
FRAME INSTL- TRUNNION BEAM SUPPORT, STA 70665-46545
The table above lists applicable drawings used to prepare this service bulletin. The drawings are
not necessary to make the specified changes, and are not supplied with this service bulletin. The
drawings may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
53-00Structural Repair Manual
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS but no new DTIs are necessary.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
41 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 42

L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
42 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 43

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the inspections procedures given in this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
None.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
43 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 44

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
44 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT
BLANK PAGE

### Page 45

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 737 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 737
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 737
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
5. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance unless otherwise
specified. A mirror may be necessary to enhance visual access to all exposed surfaces
in the inspection area. This level of inspection is made under normally available
lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may
require removal or opening of access panels or doors. Stands, ladders or platforms
may be required to gain proximity to the area being checked.
6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
45 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 46

7. Boeing Service Letter 737-SL-51-042, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
8. Refer to Appendix A, B, C, D and E for logic diagrams. Logic diagrams are provided
as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information in Paragraph 3.B., Work Instructions is the
primary source for tasks required for compliance.
9. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
10. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
11. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
12. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
13. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an
OPTION number, do all of the ACTION numbers for that CONDITION number or
OPTION number.
14. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
15. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. If a step or sub-step is labeled
"RC Exempt," then the RC requirement is removed from that step or sub-step. An
Alternative Method of Compliance (AMOC) is required for any deviations to RC steps,
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
46 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 47

including sub-steps and identified figures. Steps not labeled as RC may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC. This is provided that
the RC steps, including sub-steps and identified figures, can still be done as specified,
and the airplane can be put back in an airworthy condition.
B. WORK INSTRUCTIONS
1. Group 1:
The Boeing Company endorses the new FAA rules related to Limit of Validity (LOV) and
recommends immediate and permanent removal from service of any airplanes upon reaching the
LOV, whether or not it is operated under FAA jurisdiction. As such, The Boeing Company no longer
provides maintenance instructions for airplanes that have accumulated flight cycles beyond the
LOV. Airplanes in Group 1 (line number 1-291) have accumulated flight cycles beyond the LOV
of the maintenance program. 14 CFR 121.1115 and 129.115 prohibit operation of an airplane
beyond its LOV.
2. Group 2-6:
Do PART 1: ACCESS.
3. Group 2-3:
RC - Do PART 2: HIGH FREQUENCY EDDY CURRENT (HFEC) AND DETAILED INSPECTIONS
OF THE STA 685 AND STA 706 STUB BEAM WEBS for any crack.
NOTE: It is not required to do the PART 2 inspections in any area common to an existing repair.
Inspections for existing repaired areas are done in accordance with Compliance Table
2.
a. CONDITION 1: ANY CRACK FOUND ON ANY STUB BEAM WEB.
(1) (ACTION 1): Contact The Boeing Company for repair instructions and do the repair.
(2) (ACTION 2): At unrepaired locations, repeat PART 2: HIGH FREQUENCY EDDY
CURRENT (HFEC) AND DETAILED INSPECTIONS OF THE STA 685 AND STA 706
STUB BEAM WEBS for any crack at the repeat interval specified in Paragraph 1.E.,
Compliance.
NOTE: It is not required to do the PART 2 inspections in any area common to an existing
repair. Inspections for existing repaired areas are done in accordance with
Compliance Table 2.
b. CONDITION 2: NO CRACK FOUND ON ANY STUB BEAM WEB.
(1) Repeat PART 2: HIGH FREQUENCY EDDY CURRENT (HFEC) AND DETAILED
INSPECTIONS OF THE STA 685 AND STA 706 STUB BEAM WEBS for any crack at
the repeat interval specified in Paragraph 1.E., Compliance.
NOTE: It is not required to do the PART 2 inspections in any area common to an existing
repair. Inspections for existing repaired areas are done in accordance with
Compliance Table 2.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
47 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 48

4. Group 2-3:
RC - Do PART 3: GENERAL VISUAL INSPECTION OF THE STA 685 AND STA 706 STUB BEAM
WEBS for any existing repair.
a. CONDITION 3: ANY APPROVED EXISTING REPAIR FOUND ON THE STUB BEAM WEB
THAT MEETS THE CRITERIA IN PART 3.
NOTE: An approved repair is an installed repair that was Boeing Organization Designation
Authorization (ODA) approved via an FAA Form 8100-9.
(1) Do PART 4: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE
CRITICAL FASTENER ROW IN STUB BEAM WEB COMMON TO THE STRUCTURAL
FILLER for any crack.
(a) CONDITION 3.1: ANY CRACK FOUND IN CRITICAL FASTENER ROW.
1) (ACTION 1): Contact The Boeing Company for repair instructions and do the
repair.
2) (ACTION 2): At locations with no crack found in critical fastener row, repeat
PART 4: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE
CRITICAL FASTENER ROW IN STUB BEAM WEB COMMON TO THE
STRUCTURAL FILLER for any crack at the repeat interval specified in Paragraph
1.E., Compliance.
3) (ACTION 3): At unrepaired locations, repeat PART 3: GENERAL VISUAL
INSPECTION OF THE STA 685 AND STA 706 STUB BEAM WEBS for any
existing repair at the repeat interval specified in Paragraph 1.E., Compliance.
(b) CONDITION 3.2: NO CRACK FOUND IN CRITICAL FASTENER ROW.
1) Repeat PART 4: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
OF THE CRITICAL FASTENER ROW IN STUB BEAM WEB COMMON TO
THE STRUCTURAL FILLER for any crack at the repeat interval specified in
Paragraph 1.E., Compliance.
b. CONDITION 4: ANY APPROVED EXISTING REPAIR FOUND ON THE STUB BEAM WEB
THAT DOES NOT MEET THE CRITERIA IN PART 3.
NOTE: An approved repair is an installed repair that was Boeing Organization Designation
Authorization (ODA) approved via an FAA Form 8100-9.
(1) (ACTION 1): Contact The Boeing Company for repair instructions and do the repair.
(2) (ACTION 2): At unrepaired locations, repeat PART 3: GENERAL VISUAL INSPECTION
OF THE STA 685 AND STA 706 STUB BEAM WEBS for any existing repair at the repeat
interval specified in Paragraph 1.E., Compliance.
c. CONDITION 5: ANY EXISTING REPAIR FOUND NOT APPROVED BY BOEING ODA.
NOTE: An approved repair is an installed repair that was Boeing Organization Designation
Authorization (ODA) approved via an FAA Form 8100-9.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
48 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 49

(1) (ACTION 1): Contact The Boeing Company for repair instructions and do the repair.
(2) (ACTION 2): At unrepaired locations, repeat PART 3: GENERAL VISUAL INSPECTION
OF THE STA 685 AND STA 706 STUB BEAM WEBS for any existing repair at the repeat
interval specified in Paragraph 1.E., Compliance.
d. CONDITION 6: NO EXISTING REPAIR FOUND.
(1) Repeat PART 3: GENERAL VISUAL INSPECTION OF THE STA 685 AND STA 706
STUB BEAM WEBS for any existing repair at the repeat interval specified in Paragraph
1.E., Compliance.
5. Group 4-6:
RC - Do PART 2: HIGH FREQUENCY EDDY CURRENT (HFEC) AND DETAILED INSPECTIONS
OF THE STA 685 AND STA 706 STUB BEAM WEBS for any crack.
NOTE: It is not required to do the PART 2 inspections in any area common to an existing repair.
Inspections for existing repaired areas are done in accordance with Compliance Table
4.
a. CONDITION 7: ANY CRACK FOUND ON ANY STUB BEAM WEB THAT CAN BE REPAIRED
in accordance with 737-300 SRM 53-00-07, Repair 21 or 737-400 SRM 53-00-07, Repair 21
or 737-500 SRM 53-00-07, Repair 21.
(1) (ACTION 1): Do PART 5: STUB BEAM WEB REPAIR.
(2) (ACTION 2): Repeat PART 2: HIGH FREQUENCY EDDY CURRENT (HFEC) AND
DETAILED INSPECTIONS OF THE STA 685 AND STA 706 STUB BEAM WEBS for any
crack at the repeat interval specified in Paragraph 1.E., Compliance.
NOTE: It is not required to do the PART 2 inspections in any area common to an existing
repair. Inspections for existing repaired areas are done in accordance with
Compliance Table 4.
NOTE: For repairs accomplished in accordance with 737-300 SRM 53-00-07, Repair
21 or 737-400 SRM 53-00-07, Repair 21 or 737-500 SRM 53-00-07, Repair 21,
refer to the SRM for inspection requirements.
b. CONDITION 8: ANY CRACK FOUND ON ANY STUB BEAM WEB THAT CANNOT BE
REPAIRED in accordance with 737-300 SRM 53-00-07, Repair 21 or 737-400 SRM 53-00-07,
Repair 21 or 737-500 SRM 53-00-07, Repair 21.
(1) (ACTION 1): Contact The Boeing Company for repair instructions and do the repair.
(2) (ACTION 2): At unrepaired locations, repeat PART 2: HIGH FREQUENCY EDDY
CURRENT (HFEC) AND DETAILED INSPECTIONS OF THE STA 685 AND STA 706
STUB BEAM WEBS for any crack at the repeat interval specified in Paragraph 1.E.,
Compliance.
NOTE: It is not required to do the PART 2 inspections in any area common to an existing
repair. Inspections for existing repaired areas are done in accordance with
Compliance Table 4.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
49 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 50

NOTE: For repairs accomplished in accordance with 737-300 SRM 53-00-07, Repair
21 or 737-400 SRM 53-00-07, Repair 21 or 737-500 SRM 53-00-07, Repair 21,
refer to the SRM for inspection requirements.
c. CONDITION 9: NO CRACK FOUND ON ANY STUB BEAM WEB.
(1) Repeat PART 2: HIGH FREQUENCY EDDY CURRENT (HFEC) AND DETAILED
INSPECTIONS OF THE STA 685 AND STA 706 STUB BEAM WEBS for any crack at
the repeat interval specified in Paragraph 1.E., Compliance.
NOTE: It is not required to do the PART 2 inspections in any area common to an existing
repair. Inspections for existing repaired areas are done in accordance with
Compliance Table 4.
NOTE: For repairs accomplished in accordance with 737-300 SRM 53-00-07, Repair
21 or 737-400 SRM 53-00-07, Repair 21 or 737-500 SRM 53-00-07, Repair 21,
refer to the SRM for inspection requirements.
6. Group 4-6:
RC - Do PART 3: GENERAL VISUAL INSPECTION OF THE STA 685 AND STA 706 STUB BEAM
WEBS for any existing repair.
NOTE: For repairs accomplished in accordance with 737-300 SRM 53-00-07, Repair 21 or
737-400 SRM 53-00-07, Repair 21 or 737-500 SRM 53-00-07, Repair 21, refer to the
SRM for inspection requirements.
a. CONDITION 10: ANY APPROVED EXISTING REPAIR FOUND ON THE STUB BEAM WEB
THAT MEETS THE CRITERIA IN PART 3.
NOTE: An approved repair is an installed repair that was Boeing Organization Designation
Authorization (ODA) approved via an FAA Form 8100-9.
(1) Do PART 4: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE
CRITICAL FASTENER ROW IN STUB BEAM WEB COMMON TO THE STRUCTURAL
FILLER for any crack.
(a) CONDITION 10.1: ANY CRACK FOUND IN CRITICAL FASTENER ROW.
1) (ACTION 1): Contact The Boeing Company for repair instructions and do the
repair.
2) (ACTION 2): At locations with no crack found in critical fastener row, repeat
PART 4: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE
CRITICAL FASTENER ROW IN STUB BEAM WEB COMMON TO THE
STRUCTURAL FILLER for any crack at areas with approved existing repairs at
the repeat interval specified in Paragraph 1.E., Compliance.
3) (ACTION 3): At unrepaired locations, repeat PART 3: GENERAL VISUAL
INSPECTION OF THE STA 685 AND STA 706 STUB BEAM WEBS for any
existing repair at the repeat interval specified in Paragraph 1.E., Compliance.
(b) CONDITION 10.2: NO CRACK FOUND IN CRITICAL FASTENER ROW.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
50 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 51

1) Repeat PART 4: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
OF THE CRITICAL FASTENER ROW IN STUB BEAM WEB COMMON TO
THE STRUCTURAL FILLER for any crack at areas with approved existing repairs
at the repeat interval specified in Paragraph 1.E., Compliance.
b. CONDITION 11: ANY APPROVED EXISTING REPAIR FOUND ON THE STUB BEAM WEB
THAT DOES NOT MEET THE CRITERIA IN PART 3, AND WAS NOT ACCOMPLISHED in
accordance with 737-300 SRM 53-00-07, Repair 21 or 737-400 SRM 53-00-07, Repair 21 or
737-500 SRM 53-00-07, Repair 21.
NOTE: An approved repair is an installed repair that was Boeing Organization Designation
Authorization (ODA) approved via an FAA Form 8100-9.
(1) (ACTION 1): Contact The Boeing Company for repair instructions and do the repair.
(2) (ACTION 2): At unrepaired locations, repeat PART 3: GENERAL VISUAL INSPECTION
OF THE STA 685 AND STA 706 STUB BEAM WEBS for any existing repair at the repeat
interval specified in Paragraph 1.E., Compliance.
c. CONDITION 12: ANY EXISTING REPAIR FOUND NOT APPROVED BY BOEING ODA.
NOTE: An approved repair is an installed repair that was Boeing Organization Designation
Authorization (ODA) approved via an FAA Form 8100-9.
(1) (ACTION 1): Contact The Boeing Company for repair instructions and do the repair.
(2) (ACTION 2): At unrepaired locations, repeat PART 3: GENERAL VISUAL INSPECTION
OF THE STA 685 AND STA 706 STUB BEAM WEBS for any existing repair at the repeat
interval specified in Paragraph 1.E., Compliance.
d. CONDITION 13: NO EXISTING REPAIR FOUND.
(1) Repeat PART 3: GENERAL VISUAL INSPECTION OF THE STA 685 AND STA 706
STUB BEAM WEBS for any existing repair at the repeat interval specified in Paragraph
1.E., Compliance.
7. Group 2-6:
RC - Do PART 6: HIGH FREQUENCY EDDY CURRENT (HFEC) AND DETAILED INSPECTIONS
OF THE STA 695 STUB BEAM WEB for any crack.
a. CONDITION 14: ANY CRACK FOUND ON ANY STUB BEAM WEB.
(1) (ACTION 1): Contact The Boeing Company for repair instructions and do the repair.
(2) (ACTION 2): At unrepaired locations, repeat PART 6: HIGH FREQUENCY EDDY
CURRENT (HFEC) AND DETAILED INSPECTIONS OF THE STA 695 STUB BEAM
WEB for any crack at the repeat interval specified in Paragraph 1.E., Compliance.
b. CONDITION 15: NO CRACK FOUND ON ANY STUB BEAM WEB.
(1) Repeat PART 6: HIGH FREQUENCY EDDY CURRENT (HFEC) AND DETAILED
INSPECTIONS OF THE STA 695 STUB BEAM WEB for any crack at the repeat interval
specified in Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
51 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 52

8. Group 2-6:
Do PART 7: CLOSE ACCESS.
9. Put the airplane back to a serviceable condition.
Group 2-6:
PART 1: ACCESS
1. Group 2-3:
Use the following steps to get access:
a. Remove and keep the left and the right side passenger seats to get access to the STA 685,
STA 695, and STA 706 stub beams. Refer to 737-100/200 AMM 25-22-00 as an accepted
procedure.
b. Remove and keep the sidewall panels from the stations where passenger seats were removed.
Refer to 737-100/200 AMM 25-21-00, 737-100/200 AMM 25-21-21, 737-100/200 AMM
25-21-311, or 737-100/200 AMM 25-21-346 as accepted procedures.
c. Remove and keep the carpet and floor panels to get access to the STA 685, STA 695, and
STA 706 stub beams. Refer to 737-100/200 AMM 25-27-100, 737-100/200 AMM 53-21-00
as accepted procedures.
d. Remove and keep the flight control cables at STA 685, STA 695, and STA 706 as required.
Refer to 737-100/200 AMM 27-09-11 as an accepted procedure.
2. Group 4-6:
Use the following steps to get access:
a. Remove and keep the left side and the right side passenger seats to get access to the STA
685, STA 695, and STA 706 stub beams. Refer to 737-300/400/500 AMM 25-22-00 as an
accepted procedure.
b. Remove and keep the sidewall panels from the stations where passenger seats were removed.
Refer to 737-300/400/500 AMM 25-21-46 as an accepted procedure.
c. Remove and keep the carpet and floor panels to get access to the STA 685, STA 695, and
STA 706 stub beams. Refer to 737-300/400/500 AMM 25-27-15, 737-300/400/500 AMM
53-21-00 as accepted procedures.
d. Remove and keep the flight control cables at STA 685, STA 695, and STA 706 as required.
Refer to 737-300/400/500 AMM 27-09-11 as an accepted procedure.
Group 2-6:
PART 2: HIGH FREQUENCY EDDY CURRENT (HFEC) AND DETAILED INSPECTIONS OF THE
STA 685 AND STA 706 STUB BEAM WEBS
1. Group 2:
Do a HFEC surface inspection and a detailed inspection for any crack in the STA 685 and STA
706 left side stub beam webs, in accordance with FIGURE 1.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
52 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 53

2. Group 2:
Do a HFEC surface inspection and a detailed inspection for any crack in the STA 685 and STA
706 right side stub beam webs, in accordance with FIGURE 2.
3. Group 3:
Do a HFEC surface inspection and a detailed inspection for any crack in the STA 685 and STA
706 left side stub beam webs, in accordance with FIGURE 3.
4. Group 3:
Do a HFEC surface inspection and a detailed inspection for any crack in the STA 685 and STA
706 right side stub beam webs, in accordance with FIGURE 4.
5. Group 4, 6:
Do a HFEC surface inspection and a detailed inspection for any crack in the STA 685 and STA
706 left side stub beam webs, in accordance with FIGURE 5.
6. Group 4, 6:
Do a HFEC surface inspection and a detailed inspection for any crack in the STA 685 and STA
706 right side stub beam webs, in accordance with FIGURE 6.
7. Group 5:
Do a HFEC surface inspection and a detailed inspection for any crack in the STA 685 and STA
706 left side stub beam webs, in accordance with FIGURE 7.
8. Group 5:
Do a HFEC surface inspection and a detailed inspection for any crack in the STA 685 and STA
706 right side stub beam webs, in accordance with FIGURE 8.
Group 2-6:
PART 3: GENERAL VISUAL INSPECTION OF THE STA 685 AND STA 706 STUB BEAM WEBS
FOR ANY EXISTING REPAIR
1. Do a general visual inspection for any existing repair on the STA 685 and STA 706 left side and
right side stub beam webs in accordance with FIGURE 9.
NOTE: To accomplish Part 4 High Frequency Eddy Current (HFEC) inspection of the critical
fastener row in the stub beam common to the structural filler, the existing repair must
have all of the criteria that follows:
– The existing repair must have removed the radius detail of the lower inboard corner
of the stub beam web.
– The existing repair must be Boeing Organization Designation Authorization (ODA)
approved via an FAA Form 8100-9.
– The existing repair must have two 7075-T6 repair angles, 0.080 thick or greater, one
each side of the web.
– The existing repair angles must extend at least two rows beyond the web trim out in
the vertical and inboard directions, and the structural filler must extend at least one
fastener row beyond the repair angles.
– The existing repair upper row of fasteners must be 3/16 X2 oversize hi-loks or greater.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
53 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 54

Group 2-6:
PART 4: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE CRITICAL FASTENER
ROW IN STUB BEAM WEB COMMON TO THE STRUCTURAL FILLER
1. Do a HFEC surface inspection for any crack in the STA 685 and STA 706 left side repaired stub
beam webs, accordance with FIGURE 10.
2. Do a HFEC surface inspection for any crack in the STA 685 and STA 706 right side repaired stub
beam webs, accordance with FIGURE 11.
Group 4-6:
PART 5: STUB BEAM WEB REPAIR
1. Do the stub beam web repair in accordance with 737-300 SRM 53-00-07, Repair 21 or 737-400
SRM 53-00-07, Repair 21 or 737-500 SRM 53-00-07, Repair 21.
NOTE: SRM 737 53-00-07, Repair 21 is not applicable to stub beams with previously existing
repairs or crack damage originating from the stub beam cable holes.
Group 2-6:
PART 6: HIGH FREQUENCY EDDY CURRENT (HFEC) AND DETAILED INSPECTIONS OF THE
STA 695 STUB BEAM WEB
1. Group 2:
Do a HFEC surface inspection and a detailed inspection for any crack in the STA 695 left side
stub beam web, in accordance with FIGURE 12.
2. Group 2:
Do a detailed inspection for any crack in the STA 695 right side stub beam web, in accordance
with FIGURE 13.
3. Group 3:
Do a detailed inspection for any crack in the STA 695 left side stub beam web, in accordance with
FIGURE 14.
4. Group 3:
Do a detailed inspection for any crack in the STA 695 right side stub beam web, in accordance
with FIGURE 15.
5. Group 4, 6:
Do a HFEC surface inspection and a detailed inspection for any crack in the STA 695 left side
stub beam web, in accordance with FIGURE 16.
6. Group 4, 6:
Do a HFEC surface inspection and a detailed inspection for any crack in the STA 695 right side
stub beam web, in accordance with FIGURE 17.
7. Group 5:
Do a detailed inspection for any crack in the STA 695 left side stub beam web, in accordance with
FIGURE 18.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
54 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 55

8. Group 5:
Do a detailed inspection for any crack in the STA 695 right side stub beam web, in accordance
with FIGURE 19.
Group 2-6:
PART 7: CLOSE ACCESS
1. Group 2-3:
a. Install kept flight control cables at STA 685, STA 695, and STA 706 as required. Refer to
737-100/200 AMM 27-09-11 as an acceptable procedure.
b. Install kept carpet and floor panels. Refer to 737-100/200 AMM 25-27-100, 737-100/200 AMM
53-21-00 as accepted procedures.
c. Install kept sidewall panels. Refer to 737-100/200 AMM 25-21-00, 737-100/200 AMM 25-21-21,
737-100/200 AMM 25-21-311, or 737-100/200 AMM 25-21-346 as accepted procedures.
d. Install kept passenger seats. Refer to 737-100/200 AMM 25-22-00 as an accepted procedure.
2. Group 4-6:
a. Install kept flight control cables at STA 685, STA 695, and STA 706 as required. Refer to
737-300/400/500 AMM 27-09-11 as an acceptable procedure.
b. Install kept carpet and floor panels. Refer to 737-300/400/500 AMM 25-27-15, 737-300/400/500
AMM 53-21-00 as accepted procedures.
c. Install kept sidewall panels. Refer to 737-300/400/500 AMM 25-21-46 as an accepted
procedure.
d. Install kept passenger seats. Refer to 737-300/400/500 AMM 25-22-00 as an accepted
procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
55 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 56 (OCR)

BOEING SERVICE BULLETIN 737-53A1364
ALERT  ALERT
This Figure applies only to: Group 2.
STA
706
2534758
FIGURE 1: STUB BEAM WEBS AT STA 685 AND STA 706 - LEFT SIDE - HIGH FREQUENCY EDDY
CURRENT (HFEC) AND DETAILED INSPECTIONS
(SHEET 1 OF 3)
Original Issue: May 24, 2017
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-53A1364
Work - See page 1 for details.  56 of 114

### Page 57 (OCR)

BOEING SERVICE BULLETIN 737-53A1364
ALERT  ALERT
FRAME  FUSELAGE  LBL  PENETRATION  HOLE GROMMET  LBL
57.48  45.57
1 STUB BEAM
0.10  WEB NOTCH  WL
208.10
TOOLING HOLE
INBD  ) STUB BEAM
WEB
STA 685 SHOWN, STA 706 SIMILAF
(VIEW LOOKING FWD
LBL
45.57
STUB BEAM
WEB
— CLIP
• 0.10
LOWER
CHORD
1.00
~ 0.50
DETAILED  INBD
INSPECTION  0.50~
HFEC
INSPECTION
FIGURE 1: STUB BEAM WEBS AT STA 685 AND STA 706 - LEFT SIDE - HIGH FREQUENCY EDDY
CURRENT (HFEC) AND DETAILED INSPECTIONS
(SHEET 2 OF 3)
Original Issue: May 24, 2017
Export Controlled ECCN: 9E991 - BOEING  737-53A1364
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  57 of 114

### Page 58

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1STA 685STUB BEAM WEBInspect1
(a)1STA 706STUB BEAM WEBInspect
(b)1STA 685STUB BEAM WEBInspect2
(b)1STA 706STUB BEAM WEBInspect
(c)(d)1STA 685STUB BEAM WEBInspect3
(c)(d)1STA 706STUB BEAM WEBInspect
(a) Do a High Frequency Eddy Current (HFEC) surface inspection for any crack in the stub beam web at the
notch at LBL 45 from the aft side, and at the radius of the lower chord on the forward and aft side, in ac-
cordance with 737 NDT Manual Part 6, 51-00-00 Procedure 4 or Procedure 23. Inspect a 0.10 inch zone
around the radius.
(b) Do a HFEC surface inspection for any crack on the aft side of the stub beam web 0.10 inch around the
edge of the penetration hole grommet, in accordance with 737 NDT Manual Part 6, 51-00-00 Procedure
4 or Procedure 23. It is not necessary to remove the grommet to do the inspection.
(c) Do a detailed inspection on the forward and aft sides of the stub beam web for any crack. Make sure to
inspect around all fastener locations and tooling holes.
(d) If structure or systems hardware attached to the frame covers a structural detail that is inspected, then it
is only necessary to inspect the area of the structural detail that is visible. It is not necessary to remove
structure or systems hardware attached to the stub beam to do the inspection.
FIGURE 1: STUB BEAM WEBS AT STA 685 AND STA 706 - LEFT SIDE - HIGH FREQUENCY EDDY
CURRENT (HFEC) AND DETAILED INSPECTIONS
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 24, 2017
737-53A1364
58 of 114
BOEING SERVICE BULLETIN 737-53A1364
ALERTALERT

### Page 59 (OCR)

BOEING SERVICE BULLETIN 737-53A1364
ALERT  ALERT
This Figure applies only to: Group 2.
STA
685
2535220
FIGURE 2: STUB BEAM WEBS AT STA 685 AND STA 706 - RIGHT SIDE - HIGH FREQUENCY EDDY
CURRENT (HFEC) AND DETAILED INSPECTIONS
(SHEET 1 OF 3)
Original Issue: May 24, 2017
Export Controlled ECCN: 9E991 - BOEING  737-53A1364
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  59 of 114

### Page 60 (OCR)

BOEING SERVICE BULLETIN 737-53A1364
ALERT  ALERT
FUSELAGE
RBL  RBL  FRAME
45.57  57.48
10
WL
208.10
TOOLING HOLE
PENETRATION  ) STUB BEAM
HOLE GROMMET  WEB
STUB BEAM
WEB NOTCH
INBD
STA 685 SHOWN, STA 706 SIMILAR
(VIEW LOOKING FWD)
RBL
45.57
STUB BEAM
WEB
CLIP
LOWER
CHORD
1.00
0.50*
INBD
DETAILED
INSPECTION  0.50
HFEC  2535222
INSPECTION
FIGURE 2: STUB BEAM WEBS AT STA 685 AND STA 706 - RIGHT SIDE - HIGH FREQUENCY EDDY
CURRENT (HFEC) AND DETAILED INSPECTIONS
(SHEET 2 OF 3)
Original Issue: May 24, 2017
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  737-53A1364
Work - See page 1 for details.  60 of 114

The text continues at https://openairdocs.org/service-documents/boeing/737-53a1364/file/b1921266860d.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
