# Boeing Alert Service Bulletin 737-53A1365: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2017-0330; AD 2017-15-12 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 737-53A1365](https://openairdocs.org/service-documents/boeing/737-53a1365.md)
- Title as filed: SB-737-53A1365-00
- Pages: 40
- PDF: https://openairdocs.org/files/sha256/0e/76/0e7631c9ba707f21801fc00083238877fdbade7615117c0fb216825e7db7092f
- Page: https://openairdocs.org/service-documents/boeing/737-53a1365/file/0e7631c9ba70

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-53A1365
Original Issue: January 23, 2017
ATA System: 5331
SUBJECT: FUSELAGE - Skin - S-14 Lap Splice Lower Fastener Row Inspection
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2017 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: January 23, 2017
737-53A1365
1 of 40
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
2 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 20
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 23
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 23
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
FIGURE 1: EDDY CURRENT INSPECTION OF S-14 SKIN LAP SPLICE LOWER FASTENER ROW [Group
1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
FIGURE 2: EDDY CURRENT INSPECTION OF S-14 SKIN LAP SPLICE LOWER FASTENER ROW [Group
2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE TABLE 1: EDDY CURRENT
INSPECTION FOR ANY CRACK AT S-14 SKIN LAP SPLICE [Group 1-2, Configuration 1] . 35
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 2: EDDY CURRENT
INSPECTION FOR ANY CRACK AT S-14 LAP SPLICE POST-SSID INSPECTIONS [Group
1-2, Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
3 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
4 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
737
Service Bulletin
ALERT
SummaryNumber: 737-53A1365Original Issue: January 23, 2017
ATA System: 5331
SUBJECT: FUSELAGE - Skin - S-14 Lap Splice Lower Fastener Row Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin gives instructions to do inspections for any crack in the lower skin, at the S-14 skin lap
splice lower fastener row, from STA 370 to STA 927 on the left side and STA 344 to STA 927 on the right side
of the airplane. If the work given in this service bulletin is not accomplished, any crack in the lower skin could
remain undetected. If cracks at this location go undetected, the cracks could link up resulting in an uncontrolled
decompression of the airplane.
One operator of 737-300 airplanes, reported crack indications found in the lower skin at the S-14 lap splice lower
row while accomplishing window belt replacements from STA 360 to STA 540, and STA 727 to STA 908. Further
investigation into these reports of cracks in the lower skin at the lap splice lower row have identified small cracks
and cracks from scratches. 51 airplanes were inspected and 22 crack indications were reported from 42,358 to
48,188 total flight cycles and 53,490 to 58,796 total flight hours.
Airplanes prior to line number 2566 are covered by Service Bulletin (SB) 737-53A1255. This SB applies to
airplanes from line number 2566 to 3132.
Boeing Fleet Team Digest 737 FTD 53-15006 is related to this service bulletin.
Service Related Problem 737-SRP-53-0523 is related to this service bulletin.
The lap splice fuselage lower fastener row in the lower skin has been determined to be structure that is susceptible
to Widespread Fatigue Damage (WFD).
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
5 of 40

### Page 6

ReferenceAffectedPlanning Data
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedNoPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
NoOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION
Group 1:
Do an external Eddy Current inspection for any crack in the lower skin at the skin lap splice lower fastener row.
The inspections are accomplished at stringer S-14L from STA 370 to STA 520 and STA 727A to STA 927 and
at S-14R from STA 344 to STA 520 and STA 727A to STA 927. If no crack is found, repeat eddy current inspection
at the repeat interval in Paragraph 1.E., Compliance. If any crack is found, contact The Boeing Company for
repair instructions and do the repair. Repeat eddy current inspection at unrepaired areas at the repeat interval
in Paragraph 1.E., Compliance.
Group 2:
Do an external Eddy Current inspection for any crack in the lower skin at the skin lap splice lower fastener row.
The inspections are accomplished at stringer S-14L from STA 370 to STA 500F and STA 727A to STA 927 and
at S-14R from STA 344 to STA 520 and STA 727A to STA 927. If no crack is found, repeat eddy current inspection
at the repeat interval in Paragraph 1.E., Compliance. If any crack is found, contact The Boeing Company for
repair instructions and do the repair. Repeat eddy current inspection at unrepaired areas at the repeat interval
in Paragraph 1.E., Compliance.
EFFECTIVITY
737-300/-400/-500 Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection procedures given in this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
6 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 7

MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
7 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 8 (OCR)

BOEING SERVICE BULLETIN 737-53A1365
ALERT  ALERT
STA
927
STA  520  SźTA
STA
344
S-14R'
S-14L  STA
370
737-300/-500
(TYPICAL)
UPPER SKIN
• GROUP 1:
DO AN EDDY CURRENT INSPECTION
FOR ANY CRACK. IF ANY CRACK IS
FOUND, CONTACT THE BOEING
COMPANY FOR REPAIR
INSTRUCTIONS AND DO THE REPAIR.
IF NO CRACK IS FOUND, REPEAT
EDDY CURRENT INSPECTION.
14144141  088.
S-14L'  TYPICAL CRACK
LOWER SKIN
TYPICAL  2476098
Original Issue: January 23, 2017
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  Work - See page 1 for details.  737-53A1365  8 of 40

### Page 9 (OCR)

BOEING SERVICE BULLETIN 737-53A1365
ALERT  ALERT
STA
927
SZTA  STA
500F
STA
370
• S-14L
*S-14R
STA
344
737-400
(TYPICAL)
UPPER SKIN
GROUP 2:
DO AN EDDY CURRENT INSPECTION
FOR ANY CRACK. IF ANY CRACK IS
FOUND, CONTACT THE BOEING
COMPANY FOR REPAIF
INSTRUCTIONS AND DO THE REPAIR.
IF NO CRACK IS FOUND, REPEAT
EDDY CURRENT INSPECTION.
TYPICAL CRACK
S-14R
LOWER SKIN
TYPICAL  2537666
Original Issue: January 23, 2017
Export Controlled ECCN: 9E991 - BOEING  737-53A1365
PROPRIETARY - Copyright Unpublished  Work - See page 1 for details.  9 of 40

### Page 10

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
10 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT
BLANK PAGE

### Page 11

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-53A1365
Original Issue: January 23, 2017
ATA System: 5331
SUBJECT: FUSELAGE - Skin - S-14 Lap Splice Lower Fastener Row Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D6-19567 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is applicable to 737-300/-400/-500 Airplanes, line numbers 2566-3132 in 2
Groups. The Variable Numbers and Group Information for the applicable airplanes is given below.
DESCRIPTIONCONFIGURATIONGROUP
737-300/-500 Airplanes line numbers 2566-3132.-1
737-300/-500 Airplanes line numbers 2566-3132 that have not
accomplished SSID F-48B inspections.
1
737-300/-500 Airplanes line numbers 2566-3132 that have
accomplished SSID F-48B inspections.
2
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
11 of 40

### Page 12

DESCRIPTIONCONFIGURATIONGROUP
737-400 Airplanes line numbers 2566-3132.-2
737-400 Airplanes line numbers 2566-3132 that have not
accomplished SSID F-48B inspections.
1
737-400 Airplanes line numbers 2566-3132 that have accomplished
SSID F-48B inspections.
2
Airplane Models:
737-300, 737-400, 737-500
GroupVariable Number
2PJ553 - PJ561
2PJ601 - PJ615
2PJ811
2PJ816 - PJ817
1PM548 - PM550
1PP518 - PP520
1PP876 - PP877
1PQ297 - PQ299
1PQ345 - PQ348
1PQ370 - PQ373
1PQ391 - PQ395
1PQ409 - PQ410
1PQ414 - PQ418
1PQ431 - PQ438
1PQ447 - PQ448
1PQ451
1PQ454
1PQ474 - PQ475
1PQ772
1PQ933 - PQ935
1PQ951
1PQ971 - PQ997
1PR001 - PR017
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
12 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 13

GroupVariable Number
1PR021 - PR034
1PR041 - PR045
1PR061 - PR072
1PR077 - PR082
1PR091 - PR092
1PR096
1PR101
1PR121 - PR122
1PR131 - PR132
1PR141 - PR143
1PR161 - PR172
1PR181
1PS617 - PS630
1PS704 - PS706
1PS763 - PS799
1PS811
1PS836 - PS837
1PS841 - PS846
1PS851 - PS852
1PS856
1PS861 - PS863
1PS866 - PS868
1PS871 - PS874
1PS896 - PS897
1PS901 - PS941
1PS956 - PS957
1PS961 - PS963
1PS971 - PS978
1PT012 - PT015
1PT029 - PT031
1PT126 - PT138
1PT188
1PT307 - PT309
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
13 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 14

GroupVariable Number
1PT513 - PT517
1PT585 - PT586
1PT643 - PT644
1PT656
1PT681 - PT685
1PT716 - PT717
1PT721 - PT725
1PT801 - PT834
1PT851 - PT854
1PT871 - PT886
1PT901 - PT930
1PT971 - PT973
1PT981 - PT985
1PT996
1PU301
1PU311 - PU313
2PV204 - PV209
2PV226 - PV229
2PV284 - PV287
2PV296
2PV301 - PV302
2PV351
2PV356 - PV357
2PW086 - PW088
2PW168 - PW171
2PW246 - PW252
2PW262 - PW264
2PW271 - PW276
2PW285 - PW292
2PW401 - PW408
2PW411 - PW418
2PW421 - PW424
2PW431 - PW435
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
14 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 15

GroupVariable Number
2PW441 - PW450
2PW521 - PW522
2PW524 - PW525
2PW527 - PW530
2PW547 - PW550
2PW621 - PW622
2PW635 - PW637
2PW831
2PW851 - PW856
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
This service bulletin gives instructions to do inspections for any crack in the lower skin, at the S-14 skin
lap splice lower fastener row, from STA 370 to STA 927 on the left side and STA 344 to STA 927 on
the right side of the airplane. If the work given in this service bulletin is not accomplished, any crack in
the lower skin could remain undetected. If cracks at this location go undetected, the cracks could link
up resulting in an uncontrolled decompression of the airplane.
One operator of 737-300 airplanes, reported crack indications found in the lower skin at the S-14 lap
splice lower row while accomplishing window belt replacements from STA 360 to STA 540, and STA
727 to STA 908. Further investigation into these reports of cracks in the lower skin at the lap splice
lower row have identified small cracks and cracks from scratches. 51 airplanes were inspected and 22
crack indications were reported from 42,358 to 48,188 total flight cycles and 53,490 to 58,796 total
flight hours.
Airplanes prior to Line Number 2566 are inspected by Service Bulletin (SB) 737-53A1255. This SB
covers airplanes from Line Number 2566 to 3132.
Boeing Fleet Team Digest 737 FTD 53-15006 is related to this service bulletin.
Service Related Problem 737-SRP-53-0523 is related to this service bulletin.
The lap splice fuselage lower fastener row in the lower skin has been determined to be structure that
is susceptible to Widespread Fatigue Damage (WFD).
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
15 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 16

D. Description
Group 1:
Do an external Eddy Current inspection for any crack in the lower skin at the skin lap splice lower
fastener row. The inspections are accomplished at stringer S-14L from STA 370 to STA 520 and STA
727A to STA 927 and at S-14R from STA 344 to STA 520 and STA 727A to STA 927. If no crack is
found, repeat eddy current inspection at the repeat interval in Paragraph 1.E., Compliance. If any crack
is found, contact The Boeing Company for repair instructions and do the repair. Repeat eddy current
inspection at unrepaired areas at the repeat interval in Paragraph 1.E., Compliance.
Group 2:
Do an external Eddy Current inspection for any crack in the lower skin at the skin lap splice lower
fastener row. The inspections are accomplished at stringer S-14L from STA 370 to STA 500F and STA
727A to STA 927 and at S-14R from STA 344 to STA 520 and STA 727A to STA 927. If no crack is
found, repeat eddy current inspection at the repeat interval in Paragraph 1.E., Compliance. If any crack
is found, contact The Boeing Company for repair instructions and do the repair. Repeat eddy current
inspection at unrepaired areas at the repeat interval in Paragraph 1.E., Compliance.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
107, 108737-300, 737-500
Group 2:
Affected Maintenance Zones
ZoneModel
107, 108737-400
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Accomplish the required actions, based on the applicable conditions in Tables 1 through 2, in accordance
with Paragraph 3. Accomplishment Instructions.
Logic diagrams showing compliance tasks and compliance times are included as an aid in APPENDIX
A and APPENDIX B.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
16 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 17

Group 1-2, Configuration 1:
Table 1: Eddy Current Inspection For Any Crack At S-14 Skin Lap Splice
Repeat Interval
(Not to exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Within 4,500 flight
cycles after the origi-
nal issue date of this
service bulletin.
Before 41,000 total
flight cycles.
Do PART 1: EDDY
CURRENT INSPEC-
TION for any crack.
(a)
Airplanes with fewer
than 41,000 total
flight cycles, at the
original issue date of
this service bulletin.
-Within 4,500 flight cycles after the original
issue date of this service bulletin.
Do PART 1: EDDY
CURRENT INSPEC-
TION for any crack.
Airplanes with
41,000 or more total
flight cycles and few-
er than 61,500 total
flight cycles, at the
original issue date of
this service bulletin.
(a)
-Before 66,000 total flight cycles.Do PART 1: EDDY
CURRENT INSPEC-
TION for any crack.
Airplanes with
61,500 total flight cy-
cles or more, at the
original issue date of
this service bulletin.
(a)
12,000 flight cycles
for airplanes with
fewer than 54,001
total flight cycles.
--Repeat PART 1: ED-
DY CURRENT IN-
SPECTION for any
crack.
CONDITION 1: NO
CRACK FOUND.
(a) 6,000 flight cycles for
airplanes with 54,001
or more total flight
cycles.
(b)
-Before further flight.(ACTION 1): Contact
The Boeing Compa-
ny for repair instruc-
tions and do the re-
pair.
CONDITION 2: ANY
CRACK FOUND.
12,000 flight cycles
for airplanes with
fewer than 54,001
total flight cycles.
--(ACTION 2): Repeat
PART 1: EDDY
CURRENT INSPEC-
TION for any crack
at unrepaired areas. 6,000 flight cycles for
airplanes with 54,001
or more total flight
cycles.
(a)
(b)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
17 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 18

Group 1-2, Configuration 1:
Table 1: Eddy Current Inspection For Any Crack At S-14 Skin Lap Splice
Repeat Interval
(Not to exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
(a) If an existing external repair doubler is common to the inspection area of the lap splice lower fastener row
and meets all of the conditions that follow, it is not necessary to inspect the lower skin at the lap splice
lower fastener row under the existing repair doubler:
1. The installed repair was approved by the FAA or by a Boeing Authorized Representative who
was authorized by the FAA to make such findings.
2. The installed repair at S-14 lap joint extends a minimum of three rows of fasteners above the lap
joint upper row and a minimum of three rows of fasteners below the chem-mill step.
(b) Airplanes with 54,001 or more flight cycles, this inspection is an alternative to the SSI F-48B at the inspected
areas only. All other areas of F-48B must be inspected in accordance with SSI requirements.
Group 1-2, Configuration 2:
Table 2: Eddy Current Inspection For Any Crack At S-14 Skin Lap Splice Post-SSID Inspections
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 500 flight
cycles after the
original issue
date of this ser-
vice bulletin.
Within 6,000
flight cycles af-
ter the most re-
cent inspection.
Do PART 1: EDDY CUR-
RENT INSPECTION for
any crack.
(a)
All Airplanes.
6,000 flight cycles.-Repeat PART 1: EDDY
CURRENT INSPECTION
for any crack.
CONDITION 3: NO
CRACK FOUND. (b)
(a)
-Before further flight.(ACTION 1): Contact The
Boeing Company for re-
pair instructions and do
the repair.
CONDITION 4: ANY
CRACK FOUND.
6,000 flight cycles.(ACTION 2): Repeat
PART 1: EDDY CUR-
RENT INSPECTION for
any crack at unrepaired
areas.
(b)
(a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
18 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 19

Group 1-2, Configuration 2:
Table 2: Eddy Current Inspection For Any Crack At S-14 Skin Lap Splice Post-SSID Inspections
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
(a) If an existing external repair doubler is common to the inspection area of the lap splice lower fastener
row and meets all of the conditions that follow, it is not necessary to inspect the lower skin at the lap
splice lower fastener row under the existing repair doubler:
1. The installed repair was approved by the FAA or by a Boeing Authorized Representative who
was authorized by the FAA to make such findings.
2. The installed repair at S-14 lap joint extends a minimum of three rows of fasteners above the
lap joint upper row and a minimum of three rows of fasteners below the chem-mill step.
(b) This inspection is as an alternative to the SSI F-48B at the inspected areas only. All other areas of F-48B
must be inspected in accordance with SSI requirements.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
The manager of the FAA Los Angeles Aircraft Certification Office approves the incorporation and
accomplishment of the applicable inspections defined in this service bulletin (SB), with the compliance
times specified in Paragraph 1.E., Compliance of this SB as an Alternative Method of Compliance
(AMOC) to paragraph (h) of Airworthiness Directive AD 2008-09-13 for the inspections of Structurally
Significant Item F-48B of Supplemental Structural Inspection Document, D6-82669. This AMOC only
applies to the areas inspected per this service bulletin, Original Issue, and to those airplanes identified
in this service bulletin, Original Issue. All provisions of AD 2008-09-13 that are not specifically referenced
in the above statements remain fully applicable and must be complied with. If operators choose this
AMOC, then they must revise their FAA-approved maintenance or inspection program with these
alternative inspections.
G. Manpower
The table below shows an estimate of the task hours necessary to do this inspection for each airplane.
This estimate is for direct labor only done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
19 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 20

• Time to find the tools.
Elapsed HoursTask HoursNumber of PersonsTask
42.0084.00 (a)2Figure 1
42.0084.00 (a)2Figure 2
42.0084.00 (a)TOTAL FOR EACH AIRPLANE
(a) Hours for repairs are not included and are dependant on the inspection findings.
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not applicable.
J. References
1. Existing Data:
a. Boeing Service Bulletin 737-53A1255
b. Boeing Service Related Problem (SRP) 737-SRP-53-0523
c. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2008-09-13
d. Service Bulletin Index D6-19567
e. Standard Overhaul Practices Manual (SOPM) 20-50-01
f. 737 Fleet Team Digest (FTD) 53-15006
g. 737 Non-Destructive Testing (NDT) Manual Part 6, 53-30-00
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
SKIN INSTL - STA 360 TO STA 540, S-10 TO S-1465C35766
SKIN INSTALLATION - STA 360 TO STA 540, S-14L TO S-26L65C35767
SKIN INSTALLATION - STA 360 TO STA 540, S-14R TO S-26R65C35768
SKIN INSTL - STA 727 TO STA 908, S-10 TO S-1465C35773
SKIN INSTL - STA 727 TO STA 908, S-14L TO S-25L65C35774
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
20 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 21

TitleDrawing Number
SKIN INSTL - STA 727 TO STA 908, S-14R TO S-25R65C35775
SKIN & STRINGER INSTL- FORWARD & GALLEY DOORS65C34778
SKIN PANEL INSTL- AFT ENTRY DOOR, STA 908- STA 1016, S-4L
TO S-25L
65C35777
SKIN PANEL INSTL- AFT ENTRY DOOR, STA 908- STA 1016, S-4R
TO S-25R
65C35778
The table above lists applicable drawings used to prepare this service bulletin. The drawings are
not necessary to make the specified changes, and are not supplied with this service bulletin. The
drawings may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
None.
1. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS but no new DTIs in the Maintenance
Program are necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
21 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 22

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
22 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT
BLANK PAGE

### Page 23

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the inspection procedures given in this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
None.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to the change in this service bulletin. But maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can also be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
23 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 24

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
24 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT
BLANK PAGE

### Page 25

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 737 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 737
Aircraft Maintenance Manual (AMM).
4. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
5. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate
full threaded fasteners (screws) needed for installation in this service bulletin.
6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
25 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 26

7. Boeing Service Letter 737-SL-51-042, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
8. Refer to Appendix A and Appendix B for logic diagrams. Logic diagrams are provided
as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information in Paragraph 3.B., Work Instructions is the
primary source for tasks required for compliance.
9. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
10. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
11. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an
OPTION number, do all of the ACTION numbers for that CONDITION number or
OPTION number.
12. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
13. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. If a step or sub-step is labeled
"RC Exempt," then the RC requirement is removed from that step or sub-step. An
Alternative Method of Compliance (AMOC) is required for any deviations to RC steps,
including sub-steps and identified figures. Steps not labeled as RC may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC. This is provided that
the RC steps, including sub-steps and identified figures, can still be done as specified,
and the airplane can be put back in an airworthy condition.
B. WORK INSTRUCTIONS
Group 1-2, Configuration 1:
1. RC - Do Part 1: EDDY CURRENT INSPECTION for any crack.
NOTE: If an existing external repair doubler is common to the inspection area of the lap splice
lower fastener row and meets all of the conditions that follow, it is not necessary to inspect
the lower skin at the lap splice lower fastener row under the existing repair doubler:
1. The installed repair was approved by the FAA or by a Boeing Authorized
Representative who was authorized by the FAA to make such findings.
2. The installed repair extends a minimum of three rows of fasteners above the
chem-mill step and three rows of fasteners below the lap joint lower row.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
26 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 27

a. CONDITION 1: NO CRACK FOUND.
(1) Repeat PART 1: EDDY CURRENT INSPECTION for any crack.
NOTE: If an existing external repair doubler is common to the inspection area of the lap
splice lower fastener row and meets all of the conditions that follow, it is not
necessary to inspect the lower skin at the lap splice lower fastener row under
the existing repair doubler:
1. The installed repair was approved by the FAA or by a Boeing Authorized
Representative who was authorized by the FAA to make such findings.
2. The installed repair extends a minimum of three rows of fasteners
above the chem-mill step and three rows of fasteners below the lap
joint lower row.
b. CONDITION 2: ANY CRACK FOUND.
(1) (ACTION 1): Contact The Boeing Company for repair instructions and do the repair.
(2) (ACTION 2): Repeat PART 1: EDDY CURRENT INSPECTION for any crack at unrepaired
areas.
NOTE: If an existing external repair doubler is common to the inspection area of the lap
splice lower fastener row and meets all of the conditions that follow, it is not
necessary to inspect the lower skin at the lap splice lower fastener row under
the existing repair doubler:
1. The installed repair was approved by the FAA or by a Boeing Authorized
Representative who was authorized by the FAA to make such findings.
2. The installed repair extends a minimum of three rows of fasteners
above the chem-mill step and three rows of fasteners below the lap
joint lower row.
2. Put the airplane back to a serviceable condition.
Group 1-2, Configuration 2:
1. RC- Do Part 1:EDDY CURRENT INSPECTION for any crack.
NOTE: If an existing external repair doubler is common to the inspection area of the lap splice
lower fastener row and meets all of the conditions that follow, it is not necessary to inspect
the lower skin at the lap splice lower fastener row under the existing repair doubler:
1. The installed repair was approved by the FAA or by a Boeing Authorized
Representative who was authorized by the FAA to make such findings.
2. The installed repair extends a minimum of three rows of fasteners above the
chem-mill step and three rows of fasteners below the lap joint lower row.
a. CONDITION 3: NO CRACK FOUND.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
27 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 28

(1) Repeat PART 1: EDDY CURRENT INSPECTION for any crack.
NOTE: If an existing external repair doubler is common to the inspection area of the lap
splice lower fastener row and meets all of the conditions that follow, it is not
necessary to inspect the lower skin at the lap splice lower fastener row under
the existing repair doubler:
1. The installed repair was approved by the FAA or by a Boeing Authorized
Representative who was authorized by the FAA to make such findings.
2. The installed repair extends a minimum of three rows of fasteners
above the chem-mill step and three rows of fasteners below the lap
joint lower row.
b. CONDITION 4: ANY CRACK FOUND.
(1) (ACTION 1): Contact The Boeing Company for repair instructions and do the repair.
(2) (ACTION 2): Repeat PART 1: EDDY CURRENT INSPECTION for any crack at unrepaired
areas.
NOTE: If an existing external repair doubler is common to the inspection area of the lap
splice lower fastener row and meets all of the conditions that follow, it is not
necessary to inspect the lower skin at the lap splice lower fastener row under
the existing repair doubler:
1. The installed repair was approved by the FAA or by a Boeing Authorized
Representative who was authorized by the FAA to make such findings.
2. The installed repair extends a minimum of three rows of fasteners
above the chem-mill step and three rows of fasteners below the lap
joint lower row.
2. Put the airplane back to a serviceable condition.
PART 1: EDDY CURRENT INSPECTION
1. Group 1:
Do an Eddy Current Inspection for any crack at S-14L and S-14R skin lap splice at lower fastener
row in accordance with FIGURE 1.
2. Group 2:
Do an Eddy Current Inspection for any crack at S-14L and S-14R skin lap splice at lower fastener
row in accordance with FIGURE 2.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
28 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 29 (OCR)

BOEING SERVICE BULLETIN 737-53A1365
ALERT  ALERT
This Figure applies only to: Group 1.
S-14R  S-14L
STA
1016
STA
STA  927
908  •
STA  000 00000000 000000000000
727A
STA
520
_ STA
STA  370
360
STA
344
STA
259.50
S-14 LAP SPLICE  S-14R  S-14L
INSPECTION AREA
737-300/-500  2476106
FIGURE 1: EDDY CURRENT INSPECTION OF S-14 SKIN LAP SPLICE LOWER FASTENER ROW
(SHEET 1 OF 3)
Original Issue: January 23, 2017
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-53A1365
Work - See page 1 for details.  29 of 40

### Page 30 (OCR)

BOEING SERVICE BULLETIN 737-53A1365
ALERT  ALERT
UPPER SKIN
→S-14L/R
S-13L/R
TYPICAL
CRACK
S-14L/R
LOWER SKIN
TYPICAL LAP SPLICE CONFIGURATION
2476145
FIGURE 1: EDDY CURRENT INSPECTION OF S-14 SKIN LAP SPLICE LOWER FASTENER ROW
(SHEET 2 OF 3)
Original Issue: January 23, 2017
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  737-53A1365
Work - See page 1 for details.  30 of 40

### Page 31

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are by location identification provided.
More DataQtyIdentificationNameTaskStep
(a)1S-14LLAP SPLICEInspect1
(a)1S-14RLAP SPLICEInspect
(a) Do an Eddy Current Inspection for any crack along the centerline of the skin lap splice lower fastener row
along S-14L from STA 370 to STA 520 and from STA 727A to STA 927, and along S-14R from STA 344
to STA 520 and from STA 727A to STA 927 in accordance with 737 NDT Manual Part 6, 53-30-00, Pro-
cedure 9.
FIGURE 1: EDDY CURRENT INSPECTION OF S-14 SKIN LAP SPLICE LOWER FASTENER ROW
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
31 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 32 (OCR)

BOEING SERVICE BULLETIN 737-53A1365
ALERT  ALERT
This Figure applies only to: Group 2.
S-14R  S-14L
STA
1016
твердит  _ STA
STA  927
908
00000000
STA  14000
520
SIA
500F
000(
0000  STA
STA  370
360  STA
344
STA
259.50
NS-14 LAP SPLICE  S-14R  S-14L
INSPECTION AREA  737-400  2476136
FIGURE 2: EDDY CURRENT INSPECTION OF S-14 SKIN LAP SPLICE LOWER FASTENER ROW
(SHEET 1 OF 3)
Original Issue: January 23, 2017
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-53A1365
Work - See page 1 for details.  32 of 40

### Page 33 (OCR)

BOEING SERVICE BULLETIN 737-53A1365
ALERT  ALERT
UPPER SKIN
• S-14L/R
S-13L/R
TYPICAL
CRACK
S-14L/R
LOWER SKIN
TYPICAL LAP SPLICE CONFIGURATION
2537182
FIGURE 2: EDDY CURRENT INSPECTION OF S-14 SKIN LAP SPLICE LOWER FASTENER ROW
(SHEET 2 OF 3)
Original Issue: January 23, 2017
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-53A1365
Work - See page 1 for details.  33 0f 40

### Page 34

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are by location identification provided.
More DataQtyIdentificationNameTaskStep
(a)1S-14LLAP SPLICEInspect1
(a)1S-14RLAP SPLICEInspect
(a) Do an Eddy Current Inspection for any crack along the centerline of the skin lap splice lower fastener row
along S-14L from STA 370 to STA 520 and from STA 727A to STA 927, and along S-14R from STA 344
to STA 500F and from STA 727A to STA 927 in accordance with 737 NDT Manual Part 6, 53-30-00,
Procedure 9.
FIGURE 2: EDDY CURRENT INSPECTION OF S-14 SKIN LAP SPLICE LOWER FASTENER ROW
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
34 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 35

This Appendix applies only to: Group 1-2, Configuration 1.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
EDDY CURRENT INSPECTION.PART 1
NO CRACK FOUNDCONDITION 1
ANY CRACK FOUNDCONDITION 2
2. The table below gives the description for the flag notes called out in the logic diagram.
DescriptionFlag Note Letter
If an existing external repair doubler is common to the inspection area of the
lap splice lower fastener row and meets all of the conditions that follow, it is
not necessary to inspect the lower skin at the lap splice lower fastener row
under the existing repair doubler:
(a)
1. The installed repair was approved by the FAA or by a Boeing Autho-
rized Representative who was authorized by the FAA to make such
findings.
2. The installed repair at S-14 lap joint extends a minimum of three
rows of fasteners above the lap joint upper row and a minimum of
three rows of fasteners below the chem-mill step.
Airplanes with 54,001 or more flight cycles, this inspection is an alternative
to the SSI F-48B at the inspected areas only. All other areas of F-48B must
be inspected in accordance with SSI requirements.
(b)
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE TABLE 1: EDDY CURRENT
INSPECTION FOR ANY CRACK AT S-14 SKIN LAP SPLICE
(SHEET 1 OF 4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
35 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 36 (OCR)

BOEING SERVICE BULLETIN 737-53A1365
ALERT  ALERT
AIRPLANES WITH FEWER THAN 41,000 TOTAL
FLIGHT CYCLES, AT THE ORIGINAL ISSUE DATE
OF THIS SERVICE BULLETIN.
WHICHEVER OCCURS LATER
WITHIN 4,500 FLIGHT
BEFORE 41,000  CYCLES AFTER THE
TOTAL FLIGHT  ORIGINAL ISSUE
CYCLES  DATE OF THIS
SERVICE BULLETIN
DO PART 1
CONDITION 1  CONDITION 2
BEFORE FURTHER
NOT TO EXCEED 12,000  FLIGHT CYCLES FOR  NOT TO EXCEED 6,000  FLIGHT CYCLES FOR  FLIGHT
AIRPLANES WITH LESS  AIRPLANES WITH 54,001
THAN 54,001 TOTAL  OR MORE TOTAL FLIGHT
FLIGHT CYCLES  CYCLES  (ACTION 1): CONTACT
THE BOEING COMPANY
FOR REPAIR
INSTRUCTIONS AND DO
THE REPAIR
REPEAT PART 1
NOT TO EXCEED 12,000  NOT TO EXCEED 6,000
FLIGHT CYCLES FOR  FLIGHT CYCLES FOR
AIRPLANES WITH LESS  AIRPLANES WITH 54,001
THAN 54,001 TOTAL  OR MORE TOTAL FLIGHT
FLIGHT CYCLES  CYCLES
(ACTION 2): REPEAT
PART 1
(a)  2536756
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE TABLE 1: EDDY CURRENT
INSPECTION FOR ANY CRACK AT S-14 SKIN LAP SPLICE
(SHEET 2 OF 4)
Original Issue: January 23, 2017
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  737-53A1365
Work - See page 1 for details.  36 of 40

### Page 37 (OCR)

BOEING SERVICE BULLETIN 737-53A1365
ALERT  ALERT
AIRPLANES WITH 41,000 OR MORE TOTAL
FLIGHT CYCLES AND FEWER THAN 61,500
TOTAL FLIGHT CYCLES, AT THE ORIGINAL
ISSUE DATE OF THIS SERVICE BULLETIN.
WITHIN 4,500 FLIGHT CYCLES AFTER THE
ORIGINAL ISSUE DATE OF THIS SERVICE
BULLETIN.
DO PART 1
(a)
CONDITION 1  CONDITION 2
BEFORE FURTHER
NOT TO EXCEED 12,000  FLIGHT CYCLES FOR  NOT TO EXCEED 6,000  FLIGHT CYCLES FOR  FLIGHT
AIRPLANES WITH LESS  AIRPLANES WITH 54,001
THAN 54,001 TOTAL  OR MORE TOTAL FLIGHT
FLIGHT CYCLES  CYCLES  (ACTION 1): CONTACT
THE BOEING COMPANY
FOR REPAIR
INSTRUCTIONS AND DO
THE REPAIR
REPEAT PART 1
(a)  NOT TO EXCEED 12,000  NOT TO EXCEED 6,000
FLIGHT CYCLES FOR  FLIGHT CYCLES FOR
AIRPLANES WITH 54,001
AIRPLANES WITH LESS  THAN 54,001 TOTAL  FLIGHT CYCLES  OR MORE TOTAL FLIGHT  CYCLES
(ACTION 2): REPEAT
PART 1
2547153
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE TABLE 1: EDDY CURRENT
INSPECTION FOR ANY CRACK AT S-14 SKIN LAP SPLICE
(SHEET 3 OF 4)
Original Issue: January 23, 2017
Export Controlled ECCN: 9E991 - BOEING  737-53A1365
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  37 of 40

### Page 38 (OCR)

BOEING SERVICE BULLETIN 737-53A1365
ALERT  ALERT
AIRPLANES WITH 61,500 TOTAL FLIGHT
CYCLES OR MORE, AT THE ORIGINAL
ISSUE DATE OF THIS SERVICE
BULLETIN.
BEFORE 66,000 TOTAL FLIGHT
CYCLES
DO PART 1  (a)
CONDITION 1  CONDITION 2
NOT TO EXCEED 6,000  BEFORE FURTHER
FLIGHT CYCLES FOR  FLIGHT
AIRPLANES WITH 54,001
OR MORE TOTAL FLIGHT
CYCLES  (ACTION 1): CONTACT
THE BOEING COMPANY
FOR REPAIR
INSTRUCTIONS AND DO
THE REPAIR
REPEAT PART 1
(a)  NOT TO EXCEED 6,000
FLIGHT CYCLES FOR
AIRPLANES WITH 54,001
OR MORE TOTAL FLIGHT
CYCLES
(b)
(ACTION 2):
REPEAT PART 1
|(a)
2547154
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE TABLE 1: EDDY CURRENT
INSPECTION FOR ANY CRACK AT S-14 SKIN LAP SPLICE
(SHEET 4 OF 4)
Original Issue: January 23, 2017
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  737-53A1365
Work - See page 1 for details.  38 of 40

### Page 39

This Appendix applies only to: Group 1-2, Configuration 2.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
EDDY CURRENT INSPECTION.PART 1
NO CRACK FOUNDCONDITION 3
ANY CRACK FOUNDCONDITION 4
2. The table below gives the description for the flag notes called out in the logic diagram.
DescriptionFlag Note Letter
If an existing external repair doubler is common to the inspection area of the
lap splice lower fastener row and meets all of the conditions that follow, it is
not necessary to inspect the lower skin at the lap splice lower fastener row
under the existing repair doubler:
(a)
1. The installed repair was approved by the FAA or by a Boeing Autho-
rized Representative who was authorized by the FAA to make such
findings.
2. The installed repair at S-14 lap joint extends a minimum of three
rows of fasteners above the lap joint upper row and a minimum of
three rows of fasteners below the chem-mill step.
This inspection is as an alternative to the SSI F-48B at the inspected areas
only. All other areas of F-48B must be inspected in accordance with SSI re-
quirements.
(b)
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 2: EDDY CURRENT
INSPECTION FOR ANY CRACK AT S-14 LAP SPLICE POST-SSID INSPECTIONS
(SHEET 1 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 23, 2017
737-53A1365
39 of 40
BOEING SERVICE BULLETIN 737-53A1365
ALERTALERT

### Page 40 (OCR)

BOEING SERVICE BULLETIN 737-53A1365
ALERT  ALERT
WHICHEVER OCCURS LATER
WITHIN 500 FLIGHT
WITHIN 6,000 FLIGHT  CYCLES AFTER THE
CYCLES AFTER THE  ORIGINAL ISSUE DATE
LAST INSPECTION.  OF THIS SERVICE
BULLETIN.
DO PART 1
(a)
CONDITION 3  CONDITION 4
NOT TO EXCEED 6,000 FLIGHT  BEFORE FURTHER
CYCLES  FLIGHT
ACTION 1: CONTACT THE
REPEAT PART 1  BOEING COMPANY FOR
(a)  REPAIR INSTRUCTIONS
AND DO THE REPAIR
NOT TO EXCEED 6,000 FLIGHT
CYCLES  (0)
ACTION 2: REPEAT
PART 1  (a)  2476165
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 2: EDDY CURRENT
INSPECTION FOR ANY CRACK AT S-14 LAP SPLICE POST-SSID INSPECTIONS
(SHEET 2 OF 2)
Original Issue: January 23, 2017
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  737-53A1365
Work - See page 1 for details.  40 of 40

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
