# Boeing Alert Service Bulletin 737-53A1382: No revision named, from page 181

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2019-0670, the docket of AD 2020-02-16. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 737-53A1382](https://openairdocs.org/service-documents/boeing/737-53a1382.md)
- Title as filed: 737-53A1382-00--RB - BOEING
- Pages: 227
- PDF: https://openairdocs.org/files/sha256/bb/29/bb296ea55e6be421081a2726fe2bdb4004709894f5cd44cc6a0fc1ef92e80be4
- Page: https://openairdocs.org/service-documents/boeing/737-53a1382/file/bb296ea55e6b

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 181

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14L, STA 727A TO
STA 787
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 25: SECTION 46 - SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH
FREQUENCY EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
181 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 182 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 10.
STA
1016
STA
727
STA  STA
908  787
STA
1016
- S-1
0000090000000
- S-14R
FRAME
FWD
UPPER SKIN
LOWER SKIN
TYPICAL CRACK
STRINGER-
TYPICAL SKIN LAP SPLICE
INSPECTION AREA  2850977
FIGURE 26: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - EXTERNAL DUAL FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  182 of 227

### Page 183

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14R, STA 787 TO
STA 908
SKIN - LAP SPLICEInspect1
(a) Do the external Dual Frequency Eddy Curent Inspection of the lower skin along the lap splice lower fas-
tener row for any crack, in accordance with 737 NDT Manual Part 6, 53-30-00 Procedure 9.
Do not do the contingent open hole inspection specified in 737 NDT Manual Part 6, 53-30-00 Procedure
9.
FIGURE 26: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - EXTERNAL DUAL FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
183 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 184 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 4-5.
STA
1016
STA
727
STA  STA
787  908
STA  STA
1016
S-1
0000009000000  -S-14L
FRAME
•
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER
TYPICAL SKIN LAP SPLICE
/A INSPECTION AREA  2851558
FIGURE 27: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  184 of 227

### Page 185

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14L, STA 787 TO
STA 908
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 27: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
185 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 186 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 11, Configuration 1.
STA
727
STA  STA
847  727A
STA
1016
000  0000000000000
- S-14R
FRAME
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER•
TYPICAL SKIN LAP SPLICE
INSPECTION AREA  2850784
FIGURE 28: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - EXTERNAL DUAL FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  186 of 227

### Page 187

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14R, STA 727A TO
STA 847
SKIN - LAP SPLICEInspect1
(a) Do the external Dual Frequency Eddy Curent Inspection of the lower skin along the lap splice lower fas-
tener row for any crack, in accordance with 737 NDT Manual Part 6, 53-30-00 Procedure 9.
Do not do the contingent open hole inspection specified in 737 NDT Manual Part 6, 53-30-00 Procedure
9.
FIGURE 28: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - EXTERNAL DUAL FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
187 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 188 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 6, Configuration 2-3.
STA
1016
STA
727
STA
727G
STA
1016
S-1
- S-14L
FWD
FRAME
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER
TYPICAL SKIN LAP SPLICE
/A INSPECTION AREA  2851559
FIGURE 29: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  188 of 227

### Page 189

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14L, STA 727A TO
STA 727G
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 29: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
189 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 190 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 1, Configuration 1.
STA
1016
STA
727
STA
STA  827
1016
S-1
S-14R -  000000000
FRAME
FWD
UPPER SKIN
LOWER SKIN
TYPICAL CRACK
STRINGER•
TYPICAL SKIN LAP SPLICE
/ INSPECTION AREA
2851566
FIGURE 30: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  190 of 227

### Page 191

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14R, STA 727 TO
STA 827
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 30: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
191 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 192 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 6, Configuration 1.
STA
1016
STA
727
STA
1016
S-1
0000  - S-14L
WD
FRAME
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER
TYPICAL SKIN LAP SPLICE
/A INSPECTION AREA  2851560
FIGURE 31: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  192 of 227

### Page 193

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14L, STA 727A TO
STA 827
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 31: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
193 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 194 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 2, Configuration 1.
STA  STA
827  727A
STA  STA
1016  727
S-1
0000000000002000  - S-14R
FWD  FRAME
UPPER SKIN
LOWER SKIN
TYPICAL CRACK
STRINGER-
TYPICAL SKIN LAP SPLICE
INSPECTION AREA  2851567
FIGURE 32: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  194 of 227

### Page 195

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14R, STA 727A TO
STA 827
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 32: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
195 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 196 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 7.
STA
1016
STA
727
i Does
SZTA
SIZA  STA
1016
S-1
000000  - S-14L
WD
FRAME
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER
TYPICAL SKIN LAP SPLICE
A INSPECTION AREA  2851561
FIGURE 33: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  196 of 227

### Page 197

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14L, STA 727A TO
STA 908
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 33: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
197 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 198 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 3, Configuration 1.
STA  STA
747  727A
STA
1016
000003000  - S-14R
FRAME
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER
TYPICAL SKIN LAP SPLICE
INSPECTION AREA  2851571
FIGURE 34: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  198 of 227

### Page 199

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14R, STA 727A TO
STA 747
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 34: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
199 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 200 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 8.
STA
1016
STA
727
STA  STA
727G  908
STA  STA
727  1016
S-1
000000  - S-14L
WD
FRAME
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER
TYPICAL SKIN LAP SPLICE
A INSPECTION AREA  2851562
FIGURE 35: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  200 of 227

### Page 201

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14L, STA 727G TO
STA 908
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 35: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
201 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 202 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 3, Configuration 1.
STA
727
STA  STA
847  747
STA
1016
S-1
0000000800000000  S-14R
FWD  FRAME
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER
TYPICAL SKIN LAP SPLICE
INSPECTION AREA  2851572
FIGURE 36: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  Copyright © Unpublished  737-53A1382 RB
Work - See page 1 for details.  202 of 227

### Page 203

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14R, STA 747 TO
STA 847
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 36: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
203 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 204 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 9, Configuration 1; Group 10.
STA
1016
STA
727
<2b 1 e00г
STA  STA
727A  827
STA
1016
000000000  - S-14L
FRAME
FWD
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER
TYPICAL SKIN LAP SPLICE
/A INSPECTION AREA  2851563
FIGURE 37: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  204 of 227

### Page 205

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14L, STA 727A TO
STA 827
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 37: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
205 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 206 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 4.
STA  STA
787  727A
STA
1016
S-1
900000000008000
- S-14R
FRAME
FWD
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER
TYPICAL SKIN LAP SPLICE
INSPECTION AREA  2851573
FIGURE 38: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Work - See page 1 for details.  Copyright © Unpublished  206 of 227

### Page 207

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14R, STA 727A TO
STA 787
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 38: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
207 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 208 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 10.
STA
1016
STA
727
220 1 800
STA  STA
727  1016
S-1
0000000000  • S-14L
FRAME
FWD
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER
TYPICAL SKIN LAP SPLICE
/A INSPECTION AREA  2851565
FIGURE 39: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  208 of 227

### Page 209

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14L, STA 827 TO
STA 908
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 39: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
209 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 210 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 4-5.
STA  STA
908  787
STA
1016
000098000000  S-14R
FWD  FRAME
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER•
TYPICAL SKIN LAP SPLICE
INSPECTION AREA  2851574
FIGURE 40: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  210 of 227

### Page 211

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14R, STA 787 TO
STA 908
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 40: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
211 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 212 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 6, Configuration 2-3.
STA
727
STA
STA
1016  727
- S-1
000000000000200000  - S-14R
FRAME
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER
TYPICAL SKIN LAP SPLICE
INSPECTION AREA  2851575
FIGURE 41: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  212 of 227

### Page 213

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14R, STA 727A TO
STA 727G
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 41: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
213 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 214 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 6, Configuration 1.
STA
727
STA
847
STA  STA
1016  727
- S-1
000000000000200000  - S-14R
FRAME
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER
TYPICAL SKIN LAP SPLICE
INSPECTION AREA  2851576
FIGURE 42: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  214 of 227

### Page 215

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14R, STA 727A TO
STA 847
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 42: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
215 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 216 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 7.
STA
727
0000 30
STA
806
STA  STA
1016  727
- S-1
000000000000300000  - S-14R
FRAME
FWD
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER
TYPICAL SKIN LAP SPLICE
INSPECTION AREA  2851577
FIGURE 43: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  216 of 227

### Page 217

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14R, STA 727A TO
STA 908
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 43: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
217 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 218 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 8.
STA
727
000] 2)
STA  STA
908  727G
STA  STA
1016  727
S-1
000000000000000000  - S-14R
FRAME
FWD
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER
TYPICAL SKIN LAP SPLICE
INSPECTION AREA  2851578
FIGURE 44: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  218 of 227

### Page 219

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14R, STA 727G TO
STA 908
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 44: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
219 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 220 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 9, Configuration 1.
STA
1016
STA
727
STA
847  27A
STA  ISTA
1016  727
- S-1
0000000000000
- S-14R
FRAME
FWD
UPPER SKIN
LOWER SKIN
TYPICAL CRACK
STRINGER-
TYPICAL SKIN LAP SPLICE
INSPECTION AREA  2851579
FIGURE 45: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  220 of 227

### Page 221

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14R, STA 727A TO
STA 847
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 45: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
221 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 222 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 10.
STA
1016
STA
727
STA
787
STA  ISTA
1016  727
- S-1
0000000000000
- S-14R
FRAME
FWD
UPPER SKIN
LOWER SKIN
TYPICAL CRACK
STRINGER-
TYPICAL SKIN LAP SPLICE
INSPECTION AREA  2851580
FIGURE 46: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  Copyright © Unpublished  737-53A1382 RB
Work - See page 1 for details.  222 of 227

### Page 223

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14R, STA 727A TO
STA 787
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 46: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
223 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 224 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 10.
STA
1016
STA
727
STA  STA
908  787
STA
1016
- S-1
0000090000000
- S-14R
FRAME
FWD
UPPER SKIN
LOWER SKIN
TYPICAL CRACK
STRINGER-
TYPICAL SKIN LAP SPLICE
INSPECTION AREA  2851581
FIGURE 47: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  737-53A1382 RB
Copyright © Unpublished
Work - See page 1 for details.  224 of 227

### Page 225

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14R, STA 787 TO
STA 908
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 47: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
225 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

### Page 226 (OCR)

REQUIREMENTS BULLETIN 737-53A1382
ALERT  ALERT
This Figure applies only to: Group 11, Configuration 1.
STA
727
STA  STA
847  727A
STA
1016
000  0000000000000
- S-14R
FRAME
UPPER SKIN
*LOWER SKIN
TYPICAL CRACK
STRINGER•
TYPICAL SKIN LAP SPLICE
INSPECTION AREA  2851582
FIGURE 48: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 1 OF 2)
Original Issue: May 06, 2019
Export Controlled ECCN: 9E991  Copyright © Unpublished  737-53A1382 RB
Work - See page 1 for details.  226 of 227

### Page 227

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1S-14R, STA 727A TO
STA 847
SKIN - LAP SPLICEInspect1
(a) Do the Open Hole - High Frequency Eddy Current (HFEC) inspection of the lower skin at all the lower
fastener row holes for any crack in accordance with NDT Manual Part 6, 51-00-00, Procedure 16.
Holes may be oversized up to 0.032 inch diameter larger than the production hole size as needed to clean
up hole for open hole HFEC inspection.
FIGURE 48: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14R - OPEN HOLE-HIGH FREQUENCY
EDDY CURRENT INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 06, 2019
737-53A1382 RB
227 of 227
REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
