# Boeing Alert Requirements Bulletin 737-53A1383 RB: Revision 3

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2026-3865, the docket of a proposed AD (Federal Register 2026-07931). Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Requirements Bulletin 737-53A1383 RB](https://openairdocs.org/service-documents/boeing/737-53a1383-rb.md)
- Title as filed: RB-737-53A1383-03--
- Pages: 79
- PDF: https://openairdocs.org/files/sha256/7e/31/7e31ddf3976cd497dcdb2988e042c0fd971e403f419f267780c41c00b183cf99
- Page: https://openairdocs.org/service-documents/boeing/737-53a1383-rb/file/7e31ddf3976c

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Requirements Bulletin
ALERT
Number: 737-53A1383 RB
Original Issue: May 09, 2019
Revision 3: July 30, 2025
ATA System: 5331
SUBJECT: FUSELAGE - Structure Around Openings - Forward Galley Door Bear Strap and Stub
Frame Inspection
EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations
(EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for
export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per
Supp.1 to Part 740 of the EAR.
9E991ECCN:
Copyright © 2025 The Boeing Company
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
1 of 79
5.0

### Page 2

Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
2 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
A. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
B. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
5. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
A. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
B. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
FIGURE 1: FORWARD GALLEY DOOR BEAR STRAP - INTERNAL GENERAL VISUAL INSPECTION OF
THE BEAR STRAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
FIGURE 2: FORWARD GALLEY DOOR BEAR STRAP - INTERNAL HIGH FREQUENCY EDDY CURRENT
(HFEC) INSPECTION OF THE BEAR STRAP . . . . . . . . . . . . . . . . . . . . . . . . 65
FIGURE 3: FORWARD GALLEY DOOR BEAR STRAP - EXTERNAL GENERAL VISUAL INSPECTION
OF THE FUSELAGE SKIN AND GAP COVER . . . . . . . . . . . . . . . . . . . . . . . . 68
FIGURE 4: FORWARD GALLEY DOOR BEAR STRAP - EXTERNAL EDDY CURRENT INSPECTIONS
OF THE BEAR STRAP AND FUSELAGE SKIN . . . . . . . . . . . . . . . . . . . . . . . 70
FIGURE 5: FORWARD GALLEY DOOR STUB FRAME - INTERNAL GENERAL VISUAL INSPECTION OF
THE STUB FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
FIGURE 6: FORWARD GALLEY DOOR STUB FRAME - INTERNAL HIGH FREQUENCY EDDY CURRENT
(HFEC) INSPECTION OF THE STUB FRAME . . . . . . . . . . . . . . . . . . . . . . . . 77
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
3 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
4 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
737
Requirements Bulletin
ALERT
Revision Transmittal SheetNumber: 737-53A1383 RBOriginal Issue: May 09, 2019
Revision 3: July 30, 2025
ATA System: 5331
SUBJECT: FUSELAGE - Structure Around Openings - Forward Galley Door Bear Strap and Stub
Frame Inspection
This revision includes all pages of the requirements bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Federal Aviation Administration (FAA) Airworthiness Directive AD 2021-02-13 is related to Requirements Bulletin
737-53A1383 RB. The effective date of AD 2021-02-13 is March 30, 2021.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to
Requirements Bulletin 737-53A1383 RB. The Airworthiness Directive will make the compliance tasks and times
given in Requirements Bulletin 737-53A1383 RB mandatory.
Effects of this revision on airplanes on which the Original Issue or Revision 1 or Revision 2 was previously done:
ActionConditionGroup
Continue repetitive inspection of the bear strap
in accordance with Table 1: Option 1 and do
inspection of the stub frame in accordance with
Table 5.
Airplanes that have accomplished the Original
Issue or Revision 1 of this bulletin and have
done Table 1: Option 1 inspection.
Group 1, Con-
figuration 1
Continue repetitive inspection of the bear strap
in accordance with Table 1: Option 1 and
continue repetitive inspection of the stub frame
in accordance with Table 5.
Airplanes that have accomplished Revision 2
of this bulletin and have done Table 1: Option
1 and Table 5 inspections.
Note: The inspection of the stub frame in Fig-
ure 5 and Figure 6 have been extended to in-
clude one more fastener.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
5 of 79

### Page 6

ActionConditionGroup
Continue repetitive inspection of the bear strap
in accordance with Table 2: Option 2 and do
inspection of the stub frame in accordance with
Table 6.
Airplanes that have accomplished the Original
Issue or Revision 1 of this bulletin and have
done Table 2: Option 2 inspection. The last
action accomplished was an external Low
Frequency Eddy Current (LFEC) inspection of
the bear strap and an external High Frequency
Eddy Current (HFEC) inspection of the fuse-
lage skin, and no crack was found.
Group 1, Con-
figuration 2
Continue repetitive inspection of the bear strap
in accordance with Table 2: Option 2 and
continue repetitive inspection of the stub frame
in accordance with Table 6.
Airplanes that have accomplished Revision 2
of this bulletin and have done Table 2: Option
2 and Table 6 inspections. The last action ac-
complished was an external Low Frequency
Eddy Current (LFEC) inspection of the bear
strap and an external High Frequency Eddy
Current (HFEC) inspection of the fuselage skin,
and no crack was found.
Note: The inspection of the stub frame in Fig-
ure 5 and Figure 6 have been extended to in-
clude one more fastener.
Continue repetitive inspection of the bear strap
in accordance with Table 2: Option 2 and do
inspection of the stub frame in accordance with
Table 5.
Airplanes that have accomplished the Original
Issue or Revision 1 of this bulletin, have done
Table 2: Option 2 inspection, and are not in
Group 1, Configuration 2.
Group 1, Con-
figuration 3
Continue repetitive inspection of the bear strap
in accordance with Table 2: Option 2 and
continue repetitive inspection of the stub frame
in accordance with Table 5.
Airplanes that have accomplished Revision 2
of this bulletin, have done Table 2: Option 2
and Table 5 inspections, and are not in Group
1, Configuration 2.
Note: The inspection of the stub frame in Fig-
ure 5 and Figure 6 have been extended to in-
clude one more fastener.
Continue repetitive inspection of the bear strap
in accordance with Table 3: Option 1 and
continue repetitive inspection of the stub frame
in accordance with Table 7.
Airplanes that have accomplished Revision 2
of this bulletin and have done Table 3: Option
1 and Table 7 inspections.
Group 2, Con-
figuration 1
Note: The inspection of the stub frame in Fig-
ure 5 and Figure 6 have been extended to in-
clude one more fastener.
Continue repetitive inspection of the bear strap
in accordance with Table 4: Option 2 and
continue repetitive inspection of the stub frame
in accordance with Table 7.
Airplanes that have accomplished Revision 2
of this bulletin and have done Table 4: Option
2 and Table 7 inspections.
Group 2, Con-
figuration 2
Note: The inspection of the stub frame in Fig-
ure 5 and Figure 6 have been extended to in-
clude one more fastener.
REASON FOR REVISION
This revision is sent to provide instructions to use Structural Repair Manual (SRM) for repair if any crack is found
during the inspection of the bear strap and fuselage skin, and to provide instructions to replace the stub frame
if any crack is found during inspection of the stub frame. In addition, this revision is sent to extend the inspection
area of the stub frame.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
6 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 7

These sections were changed:
– In Effectivity, Airplanes: Updated group configuration table.
– In Compliance: Updated Tables 1 through 7. Added Table 8.
– In Accomplishment Instructions, General Information: Added general notes.
– In Accomplishment Instructions, Work Instructions: Updated Tables 1 through 7. Added Table 8.
– FIGURE 4: Updated illustration and step table.
– FIGURE 5: Updated illustration.
– FIGURE 6: Updated illustration.
Vertical lines are put on the left edge of each page, except in Effectivity and format changes, to show the location
of all content changes.
Pages with no vertical lines have no changes.
REVISION HISTORY
Service BulletinService BulletinRequirement BulletinRequirement Bulletin
737-53A1383737-53A1383737-53A1383 RB737-53A1383 RB
Issue DateIssue Date
May 09, 2019Original Issue:May 09, 2019Original Issue:
February 19, 2020Revision 1:February 19, 2020Revision 1:
June 23, 2023Revision 2:June 23, 2023Revision 2:
July 30, 2025Revision 3:July 30, 2025Revision 3:
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
7 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 8

Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
8 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
737
Requirements Bulletin
ALERT
Number: 737-53A1383 RB
Original Issue: May 09, 2019
Revision 3: July 30, 2025
ATA System: 5331
SUBJECT: FUSELAGE - Structure Around Openings - Forward Galley Door Bear Strap and Stub
Frame Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO THE NEW
OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER.
THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED
TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT
THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE
INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB WHICH
THE SB REFERS TO AS THE RELATED DOCUMENT.
1. Effectivity
A. Airplanes
This bulletin is applicable to 737-600, 737-700, 737-700C, 737-800, 737-900, 737-900ER
Airplane(s), line number(s) 1-2598, 2600-2721, 2723-2813, 2815-2930, 2932-3068, 3070-3323,
3325-3425, 3427-3521, 3523-3611, 3613-3701, 3703-3791, 3793-3878, 3880-3915, 3917-3968,
3970-4013, 4015-4054, 4056-4098, 4100-4140, 4142-4180, 4182-4218, 4220-4255, 4257-4293,
4295-4330, 4332-4365, 4367-4398, 4400-4444, 4446-4480, 4482-4546, 4548-4608, 4610-4672,
4674-4727, 4729-4767, 4769-4812, 4814-4858, 4860-4897, 4899-4937, 4939-4977, 4979-5019,
5021-5057, 5059-5097, 5099-5137, 5139-5177, 5179-5217, 5219-5261, 5263-5297, 5299-5337,
5339-5367, 5369-5397, 5399-5427, 5429-5457, 5459-5477, 5479-5509, 5511-5541, 5543-5566,
5568-5586, 5588-5601, 5603-5622, 5624-5655, 5657-5667, 5669-5679, 5681-5711, 5713-5727,
5729-5739, 5741-5764, 5766-5787, 5789-5795, 5797-5822, 5824-5850, 5853-5879, 5881-5901,
5904-5935, 5937-5947, 5949-5962, 5964-5991, 5994-6019, 6021-6033, 6035-6047, 6049-6073,
6075, 6077-6103, 6105-6113, 6115-6131, 6133-6153, 6155-6159, 6161-6187, 6190-6215,
6217-6221, 6223-6243, 6245-6249, 6251-6271, 6274-6289, 6291-6299, 6301-6307, 6309-6325,
6327, 6329-6343, 6345-6355, 6357-6359, 6361-6371, 6373-6383, 6386-6395, 6397-6407,
6409-6411, 6413-6419, 6421-6429, 6431-6439, 6442-6447, 6449-6455, 6457-6463, 6465-6467,
6469-6471, 6473-6480, 6482-6489, 6491, 6493-6498, 6500-6507, 6509-6514, 6516-6520,
6522-6527, 6529-6531, 6533-6534, 6536-6541, 6543-6547, 6549-6554, 6556-6559, 6561,
6563-6568, 6570-6574, 6576-6581, 6583-6588, 6590-6593, 6596-6597, 6599-6602, 6604-6606,
6608-6611, 6613-6615, 6617-6620, 6622, 6624, 6626-6629, 6631-6633, 6635-6638, 6640-6642,
6644-6647, 6649-6651, 6653-6656, 6659-6660, 6662-6665, 6667-6671, 6673-6676, 6678-6680,
6682-6685, 6688-6689, 6691-6694, 6696-6698, 6700-6703, 6705-6707, 6709-6712, 6714-6716,
6718-6719, 6721, 6723-6725, 6727-6730, 6732-6734, 6736-6739, 6741-6743, 6745-6748,
6751-6752, 6754-6757, 6759-6761, 6763-6766, 6768-6770, 6772-6775, 6777-6779, 6781-6782,
6786-6788, 6790-6791, 6793, 6795, 6797, 6799-6802, 6804, 6806, 6808-6809, 6811, 6813, 6815,
6817-6818, 6820, 6822-6824, 6826-6827, 6829, 6831-6833, 6835-6836, 6838, 6840, 6842,
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
9 of 79

### Page 10

6844-6845, 6847, 6849, 6851, 6853-6854, 6856-6858, 6860, 6862-6863, 6865, 6867, 6869-6871,
6873-6874, 6878-6880, 6882-6883, 6885, 6887-6889, 6891-6892, 6894, 6896, 6898, 6900-6903,
6905, 6907, 6910, 6912-6914, 6916, 6918-6919, 6921, 6923-6925, 6927-6928, 6930, 6932-6934,
6936-6937, 6939, 6943, 6945-6948, 6950, 6952, 6954-6955, 6957-6959, 6961-6962, 6964,
6966-6967, 6969, 6971-6972, 6977, 6979, 6981-6982, 6984, 6986-6987, 6989, 6992, 6994,
6996-6997, 6999, 7001-7002, 7007, 7009, 7011-7012, 7014, 7016-7017, 7019, 7021-7022, 7024,
7026, 7029, 7031-7032, 7034, 7036-7037, 7039, 7041, 7046-7047, 7049, 7051-7052, 7054,
7056-7057, 7059, 7061, 7063, 7066-7067, 7069, 7071-7072, 7076, 7078, 7081-7082, 7084,
7086-7087, 7089, 7091-7092, 7094, 7097, 7099, 7101-7102, 7104, 7106-7107, 7109, 7112,
7116-7117, 7119, 7121-7122, 7124, 7126-7127, 7129, 7131, 7134, 7136-7137, 7139, 7141-7142,
7146, 7149, 7151-7152, 7154, 7156-7157, 7159, 7161-7162, 7164, 7167, 7169, 7171-7172, 7174,
7176-7177, 7179, 7182, 7187, 7189, 7191, 7194, 7197, 7199, 7202, 7204, 7206, 7209, 7212,
7214, 7217, 7221, 7224, 7227, 7229, 7232, 7234-7235, 7239, 7242, 7244, 7247, 7249, 7251,
7257, 7259, 7262, 7264, 7266, 7269, 7272, 7274, 7277, 7279-7280, 7284, 7287, 7292, 7294,
7297, 7299, 7302, 7304, 7307, 7309, 7312, 7314, 7317, 7319, 7322, 7327, 7329, 7332, 7334,
7337, 7339, 7342, 7344, 7347, 7349, 7352, 7354, 7357, 7362, 7364, 7367, 7369, 7372, 7374,
7377, 7379, 7382, 7387, 7397, 7402, 7407, 7412, 7417, 7422, 7432, 7437, 7442, 7447, 7452,
7457, 7467, 7472, 7477, 7482, 7487, 7492, 7502, 7507, 7512, 7517, 7522, 7527, 7537, 7547,
7552, 7557, 7562, 7572, 7577, 7582, 7587, 7592, 7597, 8592, 9103, 9274, 9430-99999 in 2
Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane
applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through
9 inclusive.
The Variable Numbers and Group Information for the applicable airplanes is given below.
NOTE: The Variable Number table below includes affected airplanes available as of the issue
date of this bulletin. Affected airplane Variable Numbers added to MyBoeingFleet.com
after the issue date of this bulletin will be shown using the Maintenance Performance
Toolbox EFFECTIVITY search function result.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
10 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 11

DESCRIPTIONCONFIGURATIONGROUP
737-600, 737-700, 737-700C, 737-800, and 737-900 airplanes, line
numbers 1 through 1762.
-1
Airplanes that have accomplished the Original Issue or Revision 1
or Revision 2 of this bulletin and have done Table 1: Option 1
inspection.
1
Airplanes that have accomplished the Original Issue or Revision 1
or Revision 2 of this bulletin and have done Table 2: Option 2
inspection. The last action accomplished was an external Low
Frequency Eddy Current (LFEC) inspection of the bear strap and an
external High Frequency Eddy Current (HFEC) inspection of the
fuselage skin, and no crack was found.
2
Airplanes that have accomplished the Original Issue or Revision 1
or Revision 2 of this bulletin, have done Table 2: Option 2 inspection,
and are not in Group 1, Configuration 2.
3
Airplanes that have not accomplished the Original Issue or Revision
1 or Revision 2 of this bulletin.
4
737-600, 737-700, 737-700C, 737-800, 737-900, and 737-900ER
airplanes, line numbers 1763 and subsequent.
-2
Airplanes that have accomplished Revision 2 of this bulletin and have
done Table 3: Option 1 and Table 7 inspections.
1
Airplanes that have accomplished Revision 2 of this bulletin and have
done Table 4: Option 2 and Table 7 inspections.
2
Airplanes that have not accomplished Revision 2 of this bulletin.3
Airplane Models:
737-600, 737-700, 737-700C, 737-800, 737-900, 737-900ER
GroupVariable Number
1YA001 - YA099
1YA101 - YA199
1YA201 - YA211
1YA221
1YA231 - YA242
1YA251 - YA256
GroupVariable Number
1YA271 - YA272
1YA291
1YA301 - YA302
1YA311 - YA314
1YA321 - YA323
1YA336 - YA345
GroupVariable Number
1YA351
1YA356 - YA357
1YA366 - YA367
1YA371 - YA377
1YA501 - YA536
1YA541 - YA552
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
11 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 12

GroupVariable Number
1YA571 - YA578
1YA601 - YA615
1YA621 - YA622
1YA626 - YA631
1YA635 - YA636
1YA641 - YA642
1YA645 - YA650
1YA656 - YA659
1YA666 - YA667
1YA671 - YA672
1YA681 - YA691
1YA701 - YA710
1YA721 - YA722
1YA731 - YA734
1YA751 - YA756
1YA801 - YA803
1YA809
1YA811 - YA814
1YA831 - YA835
1YA841 - YA862
1YA881 - YA882
1YA891 - YA892
1YA961 - YA976
2YA977 - YA978
1YB001 - YB006
1YB101 - YB132
1YB151 - YB153
1YB156 - YB158
1YB161 - YB164
1YB171 - YB172
1YB181 - YB184
1YB201 - YB208
1YB271
GroupVariable Number
1YB276
1YB301 - YB310
1YB371 - YB381
2YB382 - YB392
1YB501 - YB502
1YB521 - YB526
1YB541 - YB544
1YB551
1YB561 - YB574
2YB575
1YB576 - YB577
2YB578 - YB580
1YB581 - YB587
2YB588 - YB598
1YB601 - YB632
2YB633 - YB636
1YB651
1YB656
2YB671 - YB672
1YB851 - YB863
1YB871 - YB873
2YB874
1YB881 - YB888
2YB889 - YB893
1YB901 - YB903
1YB911
2YB961 - YB975
2YB981
2YB986 - YB998
1YC001 - YC030
1YC051 - YC083
2YC084
1YC091 - YC094
GroupVariable Number
2YC095
1YC101 - YC104
1YC111 - YC113
1YC121
1YC126 - YC127
1YC136 - YC141
1YC146 - YC147
1YC151 - YC156
1YC166 - YC171
1YC176 - YC178
2YC179
1YC186 - YC189
2YC190
1YC201 - YC203
1YC206 - YC207
1YC301 - YC305
1YC321 - YC386
2YC387
1YC391 - YC394
1YC396
1YC401 - YC417
1YC421 - YC422
1YC426 - YC428
1YC436 - YC437
2YC438 - YC439
1YC441 - YC448
1YC451 - YC455
1YC459
1YC461 - YC467
1YC471 - YC499
1YC501 - YC526
1YC571 - YC583
1YC587 - YC589
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
12 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 13

GroupVariable Number
1YC591 - YC593
1YC601 - YC655
1YC681 - YC696
1YC701 - YC715
1YC720 - YC725
1YC727 - YC741
2YC742 - YC750
1YC751 - YC752
1YC761 - YC770
1YC781 - YC793
1YC801 - YC892
1YC901 - YC907
1YC921 - YC922
1YC931 - YC932
1YC941 - YC951
1YC971 - YC978
1YC981 - YC983
1YD001 - YD007
1YD021 - YD025
1YD041 - YD057
1YD081 - YD084
1YD101 - YD108
2YD109 - YD117
1YD121 - YD126
1YD151 - YD159
1YD171 - YD172
1YD201 - YD203
1YD206 - YD209
1YD216 - YD219
1YD251 - YD254
1YD256 - YD257
1YD261
1YD301 - YD334
GroupVariable Number
1YD391
1YD401 - YD410
1YD412
2YD413 - YD424
1YD481 - YD485
1YD491
2YD492 - YD499
1YD501 - YD512
1YD531 - YD535
1YD541 - YD547
1YD561 - YD564
1YD571 - YD572
1YD591 - YD595
1YD601 - YD612
1YD651 - YD654
2YD655
1YE001 - YE020
1YE051
1YE101 - YE109
1YE151 - YE157
1YE171 - YE172
1YE201 - YE206
1YE301 - YE305
1YE321 - YE326
1YE371
2YE372 - YE383
2YF001 - YF011
2YF021 - YF049
2YF051 - YF080
2YF086 - YF087
2YF106 - YF107
2YF111 - YF114
2YF116 - YF119
GroupVariable Number
2YF121 - YF132
2YF176 - YF178
2YF191 - YF192
2YF201 - YF276
2YF401 - YF402
2YF431 - YF432
2YF436 - YF437
2YF441 - YF442
2YF451 - YF460
2YF501 - YF599
2YF601 - YF685
2YF691 - YF695
2YF701 - YF707
2YF801 - YF805
2YF831 - YF832
2YF836 - YF838
2YF871 - YF872
2YF901 - YF905
2YF921 - YF928
2YF951 - YF954
1YG001 - YG044
1YG061 - YG064
1YG066 - YG089
1YG091 - YG092
2YG093 - YG099
2YG101 - YG104
2YG111 - YG114
2YG116 - YG149
2YG151 - YG152
1YG201
2YG202 - YG205
1YG211
2YG212 - YG214
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
13 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 14

GroupVariable Number
2YG221 - YG224
2YG251 - YG252
1YG501 - YG508
2YG509 - YG517
1YG601 - YG602
2YG701
2YG711
2YG721 - YG722
2YH001 - YH012
2YH031 - YH055
2YH071 - YH080
2YH101 - YH132
2YH201 - YH202
2YH206 - YH207
2YH301 - YH307
2YH321 - YH322
2YH501 - YH542
2YH551 - YH594
2YH601 - YH606
2YH611 - YH620
2YH631 - YH632
2YH636 - YH637
2YH641
2YH681 - YH686
2YH701 - YH755
2YH801 - YH899
2YH901 - YH908
2YH911 - YH915
2YH951 - YH952
1YJ001 - YJ004
2YJ005 - YJ010
1YJ011 - YJ013
1YJ021
GroupVariable Number
1YJ471 - YJ480
1YJ501 - YJ517
1YJ531 - YJ547
2YJ548 - YJ579
1YJ591 - YJ594
2YJ595 - YJ599
1YJ631 - YJ632
1YJ671 - YJ682
2YJ683 - YJ694
1YJ801 - YJ853
2YJ854 - YJ860
1YJ861 - YJ867
1YJ871
2YJ872 - YJ880
1YJ901 - YJ902
2YJ903 - YJ904
2YJ908 - YJ910
1YJ911 - YJ923
2YJ924 - YJ929
1YJ931 - YJ936
2YJ937
1YJ941 - YJ943
2YJ944 - YJ956
2YJ961
2YJ976 - YJ977
1YK001 - YK007
1YK101 - YK104
1YK111 - YK112
1YK121 - YK122
1YK131 - YK132
2YK133
1YK136 - YK137
2YK138 - YK139
GroupVariable Number
2YK141 - YK142
2YK146 - YK148
2YK151 - YK154
2YK161 - YK167
2YK171
2YK176 - YK177
2YK186
2YK191
2YK196
2YK201 - YK202
1YK301 - YK304
2YK305 - YK314
1YK321 - YK330
2YK331 - YK340
1YK361 - YK366
2YK367 - YK378
1YK401 - YK406
1YK426 - YK427
1YK431 - YK432
2YK433 - YK450
1YK456 - YK460
2YK461 - YK467
2YK471 - YK473
2YK476
2YK478
1YK480 - YK484
2YK485 - YK487
2YK491 - YK493
2YK495 - YK499
1YK511 - YK512
2YK513 - YK516
2YK521 - YK530
2YK551 - YK571
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
14 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 15

GroupVariable Number
2YK576 - YK577
2YK580 - YK585
1YK601
2YK602
2YK606 - YK607
2YK611 - YK616
2YK621 - YK634
2YK641 - YK644
2YK651 - YK665
2YK671 - YK672
2YK676 - YK677
2YK681 - YK686
2YK691
2YK695 - YK699
2YK701 - YK713
2YK716 - YK719
2YK721 - YK741
2YK751 - YK770
2YK776 - YK778
2YK781 - YK785
2YK791 - YK792
2YK796 - YK797
2YK801 - YK899
2YK901 - YK912
2YK918 - YK919
2YK921 - YK929
2YK941 - YK999
2YL001 - YL005
2YL011 - YL016
2YL021 - YL024
2YL051 - YL052
2YL056 - YL057
2YL061
GroupVariable Number
2YL066 - YL069
2YL076 - YL077
2YL101 - YL137
2YL201 - YL237
2YL241 - YL242
2YL271 - YL272
2YL281 - YL284
2YL301 - YL303
2YL311 - YL314
2YL316 - YL321
2YL351 - YL353
2YL371 - YL374
2YL401
2YL421 - YL429
2YL431 - YL444
2YL461 - YL478
2YL501 - YL509
2YL531 - YL534
2YL541 - YL551
2YL561 - YL579
2YL591 - YL598
2YL601 - YL606
2YL611 - YL612
2YL616 - YL617
2YL621
2YL626
2YL631 - YL634
2YL636 - YL637
2YL661 - YL664
2YL676 - YL691
2YL696 - YL697
2YL701 - YL707
2YL731
GroupVariable Number
2YL751 - YL752
2YL756 - YL757
2YL761 - YL780
2YL796 - YL797
2YL801 - YL815
2YL901 - YL910
2YL921 - YL940
2YL951 - YL968
1YM101 - YM103
1YM201 - YM204
2YM205 - YM244
1YM251 - YM268
2YM269 - YM299
2YM301 - YM399
2YM401 - YM415
1YM471
1YM481 - YM482
2YM483 - YM484
1YM501
2YM502 - YM515
1YM521
2YM522
1YM541
1YM551
2YM552 - YM553
2YM571 - YM572
2YM581 - YM582
2YM591 - YM599
2YM631 - YM634
2YM641 - YM652
2YM671 - YM674
2YM691 - YM699
2YM701 - YM710
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
15 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 16

GroupVariable Number
2YM761 - YM765
2YM771 - YM779
2YN001 - YN016
2YN021 - YN024
2YN061
2YN071 - YN082
2YN091 - YN092
2YN101 - YN112
2YN121
2YN126
2YN201 - YN202
2YN211 - YN219
2YN231 - YN236
2YN261
2YN501
2YN531 - YN534
2YN551 - YN566
2YN581 - YN585
2YN591 - YN593
2YN601 - YN606
2YN651 - YN653
2YN661 - YN663
2YN666 - YN667
2YN671 - YN674
2YN701 - YN702
2YN741 - YN746
2YN756 - YN758
2YQ001 - YQ003
2YQ011 - YQ021
2YQ026 - YQ029
2YQ036 - YQ045
2YQ201 - YQ207
2YQ231
GroupVariable Number
2YQ241 - YQ251
2YQ281 - YQ284
2YQ291 - YQ296
2YQ301 - YQ302
2YQ321 - YQ324
2YQ331 - YQ334
2YQ346 - YQ347
2YQ351 - YQ367
2YQ371
2YQ401 - YQ403
2YQ451 - YQ454
2YQ456
2YQ461
2YQ471
2YQ501 - YQ520
2YQ601 - YQ606
2YQ610 - YQ614
2YR001 - YR098
2YR101 - YR105
2YR111 - YR124
2YR126 - YR144
2YR166 - YR182
2YR186 - YR198
2YR201 - YR215
2YR231 - YR294
2YR296 - YR297
2YR301 - YR334
2YR338 - YR341
2YR361 - YR366
2YR371 - YR373
2YR376 - YR377
2YR381 - YR382
2YR386 - YR388
GroupVariable Number
2YR391
2YR396 - YR399
2YR401 - YR405
2YR411 - YR413
2YR416 - YR418
2YR421 - YR424
2YR426 - YR455
2YR457 - YR499
2YR501 - YR506
2YR511 - YR520
2YR526 - YR544
2YR546 - YR551
2YR556 - YR562
2YR571 - YR582
2YR591 - YR592
2YR601 - YR605
2YR616 - YR658
2YR661 - YR663
2YR671 - YR673
2YR676 - YR678
2YR681 - YR682
2YR701 - YR769
2YR771 - YR799
2YR801 - YR827
2YR831 - YR838
2YR841 - YR899
2YR901 - YR903
2YR931 - YR934
2YR938 - YR944
2YR951 - YR998
2YS001 - YS002
2YS006 - YS009
2YS031 - YS032
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
16 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 17

GroupVariable Number
2YS051 - YS073
2YS101 - YS120
2YS126 - YS142
2YS146 - YS160
2YS166 - YS194
2YS196 - YS197
2YS201 - YS209
2YS221 - YS225
2YS231 - YS236
2YS271 - YS288
2YS295 - YS296
2YS301 - YS348
2YS351 - YS378
2YS381 - YS386
2YS393 - YS395
2YS401
2YS451
2YS456 - YS457
2YS462 - YS465
2YS467
2YS501 - YS502
2YS506
2YS511 - YS518
2YS531
2YS536 - YS538
2YS541 - YS542
2YS546
2YS551 - YS556
2YS561 - YS578
2YS581 - YS595
2YS601 - YS690
2YS701 - YS716
2YS721 - YS762
GroupVariable Number
2YS771 - YS780
2YS806 - YS810
2YS816 - YS818
2YS823 - YS825
2YS851 - YS863
2YS876
2YS881 - YS884
2YS891 - YS894
2YS896 - YS897
2YS901 - YS909
2YS911 - YS957
2YS961 - YS974
2YS976 - YS977
2YS981 - YS987
2YS991 - YS998
2YT001 - YT004
2YT006
2YT026 - YT027
2YT031 - YT032
2YT036 - YT038
2YT061 - YT068
2YT101 - YT138
2YT176 - YT185
2YT191
2YT196 - YT199
2YT201
2YT206 - YT207
2YT211 - YT213
2YT251 - YT299
2YT301 - YT307
2YT311 - YT312
2YT321 - YT355
2YT371 - YT372
GroupVariable Number
2YT381
2YT391 - YT396
2YT401 - YT403
2YT411 - YT417
2YT427
2YT461 - YT477
2YT491 - YT492
2YT501 - YT521
2YT551 - YT552
2YT556 - YT563
2YT565
2YT571 - YT578
2YT601 - YT606
2YT701 - YT708
2YT723 - YT726
2YT761 - YT781
2YT791 - YT794
2YT796 - YT797
2YT801 - YT804
2YT811 - YT813
2YT826 - YT827
2YT831 - YT832
2YT841 - YT852
2YT856 - YT863
2YT885 - YT887
2YT891 - YT895
2YT901 - YT998
2YU001 - YU060
2YU201 - YU218
2YU301 - YU329
2YU901 - YU931
2YV001 - YV012
2YV021 - YV023
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
17 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 18

GroupVariable Number
2YV030 - YV034
2YV037 - YV042
2YV045 - YV047
2YV051 - YV059
2YV081
2YV083 - YV084
2YV097 - YV099
2YV101 - YV154
2YV201 - YV203
2YV251 - YV252
2YV256 - YV257
2YV301 - YV312
2YV351 - YV368
2YV381 - YV388
2YV391 - YV394
2YV401
2YV411 - YV413
2YV431 - YV433
2YV441 - YV454
2YV461 - YV464
2YV467 - YV470
2YV501 - YV512
2YV521
2YV571 - YV586
2YV596
2YV601 - YV605
2YV651 - YV674
GroupVariable Number
2YV676
2YV695 - YV696
2YV701 - YV702
2YV711
2YV722 - YV731
2YV741 - YV794
2YV801 - YV820
2YV831 - YV848
2YV881 - YV883
2YV901 - YV915
2YV923 - YV926
2YV971 - YV983
2YW001
2YW011 - YW099
2YW101 - YW164
2YW201 - YW212
2YW226 - YW240
2YW245 - YW261
2YW263
2YW267 - YW281
2YW283 - YW285
2YW292 - YW299
2YW351
2YW356 - YW358
2YW361 - YW366
2YW371 - YW399
2YW401 - YW430
GroupVariable Number
2YW441 - YW445
2YW451 - YW452
2YW471 - YW472
2YW491 - YW498
2YW531 - YW536
2YW541 - YW545
2YW551 - YW580
2YW585 - YW591
2YW595 - YW596
2YW601
2YW610 - YW613
2YW616 - YW623
2YW666
2YW696 - YW699
2YW701 - YW715
2YW726 - YW731
2YW766 - YW775
2YW801 - YW803
2YW811 - YW813
2YW821
2YW831
2YW881
2YW891 - YW893
2YW906 - YW910
2YW916 - YW918
2YW921 - YW925
2YW971 - YW976
B. Spares Affected
None.
2. CONCURRENT REQUIREMENTS
None.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
18 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 19

3. COMPLIANCE
Federal Aviation Administration (FAA) Airworthiness Directive AD 2021-02-13 is related to Requirements
Bulletin 737-53A1383 RB. The effective date of AD 2021-02-13 is March 30, 2021.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related
to Requirements Bulletin 737-53A1383 RB. The Airworthiness Directive will make the compliance tasks
and times given in Requirements Bulletin 737-53A1383 RB mandatory.
For airplanes which have incorporated Boeing Business Jet (BBJ) Lower Cabin Altitude Supplemental Type
Certificate (STC) ST01697SE (6500 feet maximum cabin altitude in lieu of 8000 feet) as referenced in
Boeing SB 737-21-1149, the flight cycle related compliance times are different from those specified in this
requirements bulletin. All initial compliance times (threshold and grace period) specified in flight cycles must
be reduced to half of those specified in Requirements Bulletin 737-53A1383 RB. All repeat interval compliance
times specified in flight cycles must be reduced to one-quarter of those specified in Requirements Bulletin
737-53A1383 RB.
Accomplish the required actions, based on the applicable conditions in Table 1 through Table 8, in accordance
with Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Group 1, Configuration 1, 4:
Table 1: Option 1 - Internal High Frequency Eddy Current (HFEC) Inspection of the Forward Galley Door
Bear Strap
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
-Within 6,000 flight
cycles after March
30, 2021.
Before 15,000 total
flight cycles.
Do an internal general visual in-
spection of the bear strap and
an external general visual in-
spection of fuselage skin and
gap cover for any repair.
All Airplanes.
(a)
-Within 6,000 flight
cycles after March
30, 2021.
Before 15,000 total
flight cycles.
Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
CONDITION 1:
ANY REPAIR FOUND.
(c)
-Within 6,000 flight
cycles after March
30, 2021.
Before 15,000 total
flight cycles.
Do an internal HFEC inspection
of the forward galley door bear
strap for any crack.
CONDITION 2:
NO REPAIR FOUND.
-Before further flight.Do repair of any bear strap
crack found.
CONDITION 2.1:
ANY CRACK FOUND.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
19 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 20

Group 1, Configuration 1, 4:
Table 1: Option 1 - Internal High Frequency Eddy Current (HFEC) Inspection of the Forward Galley Door
Bear Strap
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
18,000
flight cy-
cles.
-Repeat the internal HFEC in-
spection of the forward galley
door bear strap for any crack.
CONDITION 2.2:
NO CRACK FOUND.
(b)
(a) The following are not to be considered as repairs for the purpose of evaluating the conditions of this table.
They must be treated as unrepaired area/no repair found for this table.
1. Replacement of gap cover in accordance with Boeing installation drawings (141A8350).
2. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, or 737-900 SRM 51-40-05.
3. Fuselage skin blend out repair within allowable damage in accordance with 737-600 SRM 53-
00-01, 737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-
01, 737-800 SRM 53-00-01, 737-800BCF SRM 53-00-01, or 737-900 SRM 53-00-01.
(b) It is not required to do the internal HFEC inspection in areas where a repair covers the affected inspection
zone if the repair meets the conditions that follow:
1. The repair is the corrective action to the forward galley door bear strap crack condition identified
in Requirements Bulletin 737-53A1383 RB and installed after the Original Issue date of Require-
ments Bulletin 737-53A1383 RB, and
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9 or the installed repair was accomplished in accordance with one of the
following:
– 737-600 SRM 53-10-01, 737-700 SRM 53-10-01, 737-700CONV SRM 53-10-01, 737-700IGW
(BBJ) SRM 53-10-01, 737-800 SRM 53-10-01, or 737-900 SRM 53-10-01 Repair 6 dated
March 10, 2020, or later approved revisions.
– 737-800BCF SRM 53-10-01 Repair 6 dated March 10, 2025, or later approved revisions.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
20 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 21

Group 1, Configuration 1, 4:
Table 1: Option 1 - Internal High Frequency Eddy Current (HFEC) Inspection of the Forward Galley Door
Bear Strap
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
(c) It is not required to contact The Boeing Company for alternative inspection(s) in areas where a repair
covers the affected inspection zone if the repair meets the conditions that follow:
1. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9 and post-repair inspections are accomplished in accordance with the
schedule repair approval listed on the FAA Form 8100-9, OR
2. The installed repair and post-repair inspections were accomplished in accordance with one of
the following:
– 737-600 SRM 53-10-01, 737-700 SRM 53-10-01, 737-700CONV SRM 53-10-01, 737-700IGW
(BBJ) SRM 53-10-01, 737-800 SRM 53-10-01, or 737-900 SRM 53-10-01 Repair 6 dated
March 10, 2020, or later approved revisions.
– 737-800BCF SRM 53-10-01 Repair 6 dated March 10, 2025, or later approved revisions.
Group 1, Configuration 2-4:
Table 2: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
-Within 6,000 flight
cycles after March
30, 2021.
Before 15,000 total
flight cycles.
Do an external general visual
inspection of the gap cover and
fuselage skin for any external
repair.
All Airplanes.
(a)
-Within 6,000 flight
cycles after March
30, 2021.
Before 15,000 total
flight cycles.
Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
CONDITION 3:
ANY EXTERNAL RE-
PAIR FOUND.
(e)
-Within 6,000 flight
cycles after March
30, 2021.
Before 15,000 total
flight cycles.
Do an external LFEC inspection
of the forward galley door bear
strap and external HFEC inspec-
tion of the fuselage skin for any
crack.
CONDITION 4:
NO EXTERNAL RE-
PAIR FOUND.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
21 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 22

Group 1, Configuration 2-4:
Table 2: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
-Before further flight.Do repair of any bear strap
crack found and any fuselage
skin crack found.
CONDITION 4.1:
ANY CRACK FOUND
DURING THE EXTER-
NAL LFEC AND EX-
TERNAL HFEC IN-
SPECTIONS.
-Within 12,000 flight cycles after the exter-
nal LFEC inspection of the forward galley
door bear strap and external HFEC inspec-
tion of the fuselage skin were done.
Do an internal general visual in-
spection of the forward galley
door bear strap for any internal
repair.
CONDITION 4.2:
NO CRACK FOUND
DURING THE EXTER-
NAL LFEC AND EX-
TERNAL HFEC IN-
SPECTIONS.
(d)(b)
-Within 12,000 flight cycles after the exter-
nal LFEC inspection of the forward galley
door bear strap and external HFEC inspec-
tion of the fuselage skin were done.
Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
CONDITION 4.2.1:
ANY INTERNAL RE-
PAIR FOUND.
(d)(e)
-Within 12,000 flight cycles after the exter-
nal LFEC inspection of the forward galley
door bear strap and external HFEC inspec-
tion of the fuselage skin were done.
Do an internal HFEC inspection
of the forward galley door bear
strap for any crack.
(c)
CONDITION 4.2.2:
NO INTERNAL RE-
PAIR FOUND.
(d)
-Before further flight.Do repair of any bear strap
crack found.
CONDITION 4.2.2.1:
ANY CRACK FOUND
DURING THE INTER-
NAL HFEC INSPEC-
TION.
18,000
flight cy-
cles.
-Repeat the internal HFEC in-
spection of the forward galley
door bear strap for any crack.
CONDITION 4.2.2.2:
NO CRACK FOUND
DURING THE INTER-
NAL HFEC INSPEC-
TION.
(c)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
22 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 23

Group 1, Configuration 2-4:
Table 2: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
(a) The following are not to be considered as external repairs for the purpose of evaluating the conditions of
this table. They must be treated as unrepaired area/no repair found for this table.
1. Replacement of gap cover in accordance with Boeing installation drawings (141A8350).
2. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, or 737-900 SRM 51-40-05.
3. Fuselage skin blend out repair within allowable damage in accordance with 737-600 SRM 53-
00-01, 737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-
01, 737-800 SRM 53-00-01, 737-800BCF SRM 53-00-01, or 737-900 SRM 53-00-01.
(b) The following are not to be considered as internal repairs for the purpose of evaluating the conditions of
this table. They must be treated as unrepaired area/no repair found for this table. It is not required to
contact The Boeing Company for alternative inspection(s) if one or a combination of the following has
been installed:
1. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, or 737-900 SRM 51-40-05.
2. Bear strap blend out repair within allowable damage in accordance with 737-600 SRM 53-00-01,
737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-01, 737-
800 SRM 53-00-01, 737-800BCF SRM 53-00-01, or 737-900 SRM 53-00-01.
(c) It is not required to do the internal HFEC inspection in areas where a repair covers the affected inspection
zone if the repair meets the conditions that follow:
1. The repair is the corrective action to the forward galley door bear strap crack condition identified
in Requirements Bulletin 737-53A1383 RB and installed after the Original Issue date of Require-
ments Bulletin 737-53A1383 RB, and
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9 or the installed repair was accomplished in accordance with one of the
following:
– 737-600 SRM 53-10-01, 737-700 SRM 53-10-01, 737-700CONV SRM 53-10-01, 737-700IGW
(BBJ) SRM 53-10-01, 737-800 SRM 53-10-01, or 737-900 SRM 53-10-01 Repair 6 dated
March 10, 2020, or later approved revisions.
– 737-800BCF SRM 53-10-01 Repair 6 dated March 10, 2025, or later approved revisions.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
23 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 24

Group 1, Configuration 2-4:
Table 2: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
(d) For airplanes which have incorporated Boeing Business Jet (BBJ) Lower Cabin Altitude Supplemental
Type Certificate (STC) ST01697SE (6500 feet maximum cabin altitude in lieu of 8000 feet) as referenced
in Boeing SB 737-21-1149, the compliance time must be reduced to one quarter.
(e) It is not required to contact The Boeing Company for alternative inspection(s) in areas where a repair
covers the affected inspection zone if the repair meets the conditions that follow:
1. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9 and post-repair inspections are accomplished in accordance with the
schedule repair approval listed on the FAA Form 8100-9, OR
2. The installed repair and post-repair inspections were accomplished in accordance with one of
the following:
– 737-600 SRM 53-10-01, 737-700 SRM 53-10-01, 737-700CONV SRM 53-10-01, 737-700IGW
(BBJ) SRM 53-10-01, 737-800 SRM 53-10-01, or 737-900 SRM 53-10-01 Repair 6 dated
March 10, 2020, or later approved revisions.
– 737-800BCF SRM 53-10-01 Repair 6 dated March 10, 2025, or later approved revisions.
Group 2, Configuration 1, 3:
Table 3: Option 1 - Internal High Frequency Eddy Current (HFEC) Inspection of the Forward Galley Door
Bear Strap
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
-Within 6,500 flight
cycles after the Revi-
sion 2 date of Re-
quirements Bulletin
737-53A1383 RB.
Before 15,000 total
flight cycles.
Do an internal general visual in-
spection of the bear strap and
an external general visual in-
spection of fuselage skin and
gap cover for any repair.
All Airplanes.
(a)
-Within 6,500 flight
cycles after the Revi-
sion 2 date of Re-
quirements Bulletin
737-53A1383 RB.
Before 15,000 total
flight cycles.
Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
(c)
CONDITION 5:
ANY REPAIR FOUND.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
24 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 25

Group 2, Configuration 1, 3:
Table 3: Option 1 - Internal High Frequency Eddy Current (HFEC) Inspection of the Forward Galley Door
Bear Strap
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
-Within 6,500 flight
cycles after the Revi-
sion 2 date of Re-
quirements Bulletin
737-53A1383 RB.
Before 15,000 total
flight cycles.
Do an internal HFEC inspection
of the forward galley door bear
strap for any crack.
CONDITION 6:
NO REPAIR FOUND.
-Before further flight.Do repair of any bear strap
crack found.
CONDITION 6.1:
ANY CRACK FOUND.
18,000
flight cy-
cles.
-Repeat the internal HFEC in-
spection of the forward galley
door bear strap for any crack.
CONDITION 6.2:
NO CRACK FOUND.
(b)
(a) The following are not to be considered as repairs for the purpose of evaluating the conditions of this table.
They must be treated as unrepaired area/no repair found for this table.
1. Replacement of gap cover in accordance with Boeing installation drawings (141A8350).
2. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, 737-900 SRM 51-40-05, or 737-900ER SRM
51-40-05.
3. Fuselage skin blend out repair within allowable damage in accordance with 737-600 SRM 53-
00-01, 737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-
01, 737-800 SRM 53-00-01, 737-800BCF SRM 53-00-01, 737-900 SRM 53-00-01, or 737-900ER
SRM 53-00-01.
(b) It is not required to do the internal HFEC inspection in areas where a repair covers the affected inspection
zone if the repair meets the conditions that follow:
1. The repair is the corrective action to the forward galley door bear strap crack condition identified
in Requirements Bulletin 737-53A1383 RB and installed after the Revision 2 date of Requirements
Bulletin 737-53A1383 RB, and
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9 or the installed repair was accomplished in accordance with 737-600
SRM 53-10-01, 737-700 SRM 53-10-01, 737-700CONV SRM 53-10-01, 737-700IGW (BBJ) SRM
53-10-01, 737-800 SRM 53-10-01, 737-800BCF SRM 53-10-01, 737-900 SRM 53-10-01, or 737-
900ER SRM 53-10-01 Repair 6 dated March 10, 2025, or later approved revisions.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
25 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 26

Group 2, Configuration 1, 3:
Table 3: Option 1 - Internal High Frequency Eddy Current (HFEC) Inspection of the Forward Galley Door
Bear Strap
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
(c) It is not required to contact The Boeing Company for alternative inspection(s) in areas where a repair
covers the affected inspection zone if the repair meets the conditions that follow:
1. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9 and post-repair inspections are accomplished in accordance with the
schedule repair approval listed on the FAA Form 8100-9, OR
2. The installed repair and post-repair inspections were accomplished in accordance with 737-600
SRM 53-10-01, 737-700 SRM 53-10-01, 737-700CONV SRM 53-10-01, 737-700IGW (BBJ) SRM
53-10-01, 737-800 SRM 53-10-01, 737-800BCF SRM 53-10-01, 737-900 SRM 53-10-01, or 737-
900ER SRM 53-10-01 Repair 6 dated March 10, 2025, or later approved revisions.
Group 2, Configuration 2-3:
Table 4: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
-Within 6,500 flight
cycles after the Revi-
sion 2 date of Re-
quirements Bulletin
737-53A1383 RB.
Before 15,000 total
flight cycles.
Do an external general visual
inspection of the gap cover and
fuselage skin for any external
repair.
(a)
All Airplanes.
-Within 6,500 flight
cycles after the Revi-
sion 2 date of Re-
quirements Bulletin
737-53A1383 RB.
Before 15,000 total
flight cycles.
Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
(e)
CONDITION 7:
ANY EXTERNAL RE-
PAIR FOUND.
-Within 6,500 flight
cycles after the Revi-
sion 2 date of Re-
quirements Bulletin
737-53A1383 RB.
Before 15,000 total
flight cycles.
Do an external LFEC inspection
of the forward galley door bear
strap and external HFEC inspec-
tion of the fuselage skin for any
crack.
CONDITION 8:
NO EXTERNAL RE-
PAIR FOUND.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
26 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 27

Group 2, Configuration 2-3:
Table 4: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
-Before further flight.Do repair of any bear strap
crack found and any fuselage
skin crack found.
CONDITION 8.1:
ANY CRACK FOUND
DURING THE EXTER-
NAL LFEC AND EX-
TERNAL HFEC IN-
SPECTIONS.
-Within 12,000 flight cycles after the exter-
nal LFEC inspection of the forward galley
door bear strap and external HFEC inspec-
tion of the fuselage skin were done.
Do an internal general visual in-
spection of the forward galley
door bear strap for any internal
repair.
CONDITION 8.2:
NO CRACK FOUND
DURING THE EXTER-
NAL LFEC AND EX-
TERNAL HFEC IN-
SPECTIONS.
(d)(b)
-Within 12,000 flight cycles after the exter-
nal LFEC inspection of the forward galley
door bear strap and external HFEC inspec-
tion of the fuselage skin were done.
Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
CONDITION 8.2.1:
ANY INTERNAL RE-
PAIR FOUND.
(d)(e)
-Within 12,000 flight cycles after the exter-
nal LFEC inspection of the forward galley
door bear strap and external HFEC inspec-
tion of the fuselage skin were done.
Do an internal HFEC inspection
of the forward galley door bear
strap for any crack.
(c)
CONDITION 8.2.2:
NO INTERNAL RE-
PAIR FOUND.
(d)
-Before further flight.Do repair of any bear strap
crack found.
CONDITION 8.2.2.1:
ANY CRACK FOUND
DURING THE INTER-
NAL HFEC INSPEC-
TION.
18,000
flight cy-
cles.
-Repeat the internal HFEC in-
spection of the forward galley
door bear strap for any crack.
CONDITION 8.2.2.2:
NO CRACK FOUND
DURING THE INTER-
NAL HFEC INSPEC-
TION.
(c)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
27 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 28

Group 2, Configuration 2-3:
Table 4: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
(a) The following are not to be considered as external repairs for the purpose of evaluating the conditions of
this table. They must be treated as unrepaired area/no repair found for this table.
1. Replacement of gap cover in accordance with Boeing installation drawings (141A8350).
2. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, 737-900 SRM 51-40-05, or 737-900ER SRM
51-40-05.
3. Fuselage skin blend out repair within allowable damage in accordance with 737-600 SRM 53-
00-01, 737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-
01, 737-800 SRM 53-00-01, 737-800BCF SRM 53-00-01, 737-900 SRM 53-00-01, or 737-900ER
SRM 53-00-01.
(b) The following are not to be considered as internal repairs for the purpose of evaluating the conditions of
this table. They must be treated as unrepaired area/no repair found for this table. It is not required to
contact The Boeing Company for alternative inspection(s) if one or a combination of the following has
been installed:
1. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, 737-900 SRM 51-40-05, or 737-900ER SRM
51-40-05.
2. Bear strap blend out repair within allowable damage in accordance with 737-600 SRM 53-00-01,
737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-01, 737-
800 SRM 53-00-01, 737-800BCF SRM 53-00-01, 737-900 SRM 53-00-01, or 737-900ER SRM
53-00-01.
(c) It is not required to do the internal HFEC inspection in areas where a repair covers the affected inspection
zone if the repair meets the conditions that follow:
1. The repair is the corrective action to the forward galley door bear strap crack condition identified
in Requirements Bulletin 737-53A1383 RB and installed after the Revision 2 date of Requirements
Bulletin 737-53A1383 RB, and
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9 or the installed repair was accomplished in accordance with 737-600
SRM 53-10-01, 737-700 SRM 53-10-01, 737-700CONV SRM 53-10-01, 737-700IGW (BBJ) SRM
53-10-01, 737-800 SRM 53-10-01, 737-800BCF SRM 53-10-01, 737-900 SRM 53-10-01, or 737-
900ER SRM 53-10-01 Repair 6 dated March 10, 2025, or later approved revisions.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
28 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 29

Group 2, Configuration 2-3:
Table 4: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
(d) For airplanes which have incorporated Boeing Business Jet (BBJ) Lower Cabin Altitude Supplemental
Type Certificate (STC) ST01697SE (6500 feet maximum cabin altitude in lieu of 8000 feet) as referenced
in Boeing SB 737-21-1149, the compliance time must be reduced to one quarter.
(e) It is not required to contact The Boeing Company for alternative inspection(s) in areas where a repair
covers the affected inspection zone if the repair meets the conditions that follow:
1. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9 and post-repair inspections are accomplished in accordance with the
schedule repair approval listed on the FAA Form 8100-9, OR
2. The installed repair and post-repair inspections were accomplished in accordance with 737-600
SRM 53-10-01, 737-700 SRM 53-10-01, 737-700CONV SRM 53-10-01, 737-700IGW (BBJ) SRM
53-10-01, 737-800 SRM 53-10-01, 737-800BCF SRM 53-10-01, 737-900 SRM 53-10-01, or 737-
900ER SRM 53-10-01 Repair 6 dated March 10, 2025, or later approved revisions.
Group 1, Configuration 1, 3:
Table 5: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
-Within 6,500 flight
cycles after the Revi-
sion 2 date of Re-
quirements Bulletin
737-53A1383 RB.
Within 18,000 flight
cycles after the last
internal HFEC in-
spection of the for-
ward galley door
bear strap was done
before the Revision
2 date of Require-
ments Bulletin 737-
53A1383 RB.
Do an internal general visual in-
spection of the forward galley
door cutout stub frame for any
repair.
(a)
All Airplanes.
(b)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
29 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 30

Group 1, Configuration 1, 3:
Table 5: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
-Within 6,500 flight
cycles after the Revi-
sion 2 date of Re-
quirements Bulletin
737-53A1383 RB.
Within 18,000 flight
cycles after the last
internal HFEC in-
spection of the for-
ward galley door
bear strap was done
before the Revision
2 date of Require-
ments Bulletin 737-
53A1383 RB.
Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
CONDITION 9:
ANY REPAIR FOUND.
(b)
-Within 6,500 flight
cycles after the Revi-
sion 2 date of Re-
quirements Bulletin
737-53A1383 RB.
Within 18,000 flight
cycles after the last
internal HFEC in-
spection of the for-
ward galley door
bear strap was done
before the Revision
2 date of Require-
ments Bulletin 737-
53A1383 RB.
Do an internal HFEC inspection
of the stub frame at the forward
galley door cutout for any crack.
CONDITION 10:
NO REPAIR FOUND.
(b)
-Before further flight.ACTION 1:CONDITION 10.1:
Replace the stub frame.ANY CRACK FOUND.
-At the time specified in Table 8.ACTION 2:
Do the actions specified in Ta-
ble 8.
18,000
flight cy-
cles.
-Repeat the internal HFEC in-
spection of the stub frame at the
forward galley door cutout for
any crack.
CONDITION 10.2
NO CRACK FOUND.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
30 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 31

Group 1, Configuration 1, 3:
Table 5: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
(a) The following are not to be considered as repairs for the purpose of evaluating the conditions of this table.
They must be treated as unrepaired area/no repair found for this table.
1. Replacement of forward galley door cutout stub frame in accordance with Boeing installation
drawings (141A8370 and 141A8380) or 737-600 SRM 53-10-01, 737-700 SRM 53-10-01, 737-
700CONV SRM 53-10-01, 737-700IGW (BBJ) SRM 53-10-01, 737-800 SRM 53-10-01, 737-
800BCF SRM 53-10-01, or 737-900 SRM 53-10-01 Repair 6 dated March 10, 2025, or later ap-
proved revisions.
2. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, or 737-900 SRM 51-40-05.
3. Fuselage skin blend out repair within allowable damage in accordance with 737-600 SRM 53-
00-01, 737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-
01, 737-800 SRM 53-00-01, 737-800BCF SRM 53-00-01, or 737-900 SRM 53-00-01.
(b) For airplanes which have incorporated Boeing Business Jet (BBJ) Lower Cabin Altitude Supplemental
Type Certificate (STC) ST01697SE (6500 feet maximum cabin altitude in lieu of 8000 feet) as referenced
in Boeing SB 737-21-1149, the compliance time must be reduced to one quarter.
Group 1, Configuration 2:
Table 6: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
-Within 6,500 flight
cycles after the Revi-
sion 2 date of Re-
quirements Bulletin
737-53A1383 RB.
Within 12,000 flight
cycles after the last
external LFEC in-
spection of the for-
ward galley door
bear strap and exter-
nal HFEC inspection
of the fuselage skin
were done.
Do an internal general visual in-
spection of the forward galley
door cutout stub frame for any
repair.
(a)
All Airplanes.
(b)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
31 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 32

Group 1, Configuration 2:
Table 6: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
-Within 6,500 flight
cycles after the Revi-
sion 2 date of Re-
quirements Bulletin
737-53A1383 RB.
Within 12,000 flight
cycles after the last
external LFEC in-
spection of the for-
ward galley door
bear strap and exter-
nal HFEC inspection
of the fuselage skin
were done.
Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
CONDITION 11:
ANY REPAIR FOUND.
(b)
-Within 6,500 flight
cycles after the Revi-
sion 2 date of Re-
quirements Bulletin
737-53A1383 RB.
Within 12,000 flight
cycles after the last
external LFEC in-
spection of the for-
ward galley door
bear strap and exter-
nal HFEC inspection
of the fuselage skin
were done.
Do an internal HFEC inspection
of the stub frame at the forward
galley door cutout for any crack.
CONDITION 12:
NO REPAIR FOUND.
(b)
-Before further flight.ACTION 1:CONDITION 12.1:
Replace the stub frame.ANY CRACK FOUND.
-At the time specified in Table 8.ACTION 2:
Do the actions specified in Ta-
ble 8.
18,000
flight cy-
cles.
-Repeat the internal HFEC in-
spection of the stub frame at the
forward galley door cutout for
any crack.
CONDITION 12.2
NO CRACK FOUND.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
32 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 33

Group 1, Configuration 2:
Table 6: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
(a) The following are not to be considered as repairs for the purpose of evaluating the conditions of this table.
They must be treated as unrepaired area/no repair found for this table.
1. Replacement of forward galley door cutout stub frame in accordance with Boeing installation
drawings (141A8370 and 141A8380) or 737-600 SRM 53-10-01, 737-700 SRM 53-10-01, 737-
700CONV SRM 53-10-01, 737-700IGW (BBJ) SRM 53-10-01, 737-800 SRM 53-10-01, 737-
800BCF SRM 53-10-01, or 737-900 SRM 53-10-01 Repair 6 dated March 10, 2025, or later ap-
proved revisions.
2. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, or 737-900 SRM 51-40-05.
3. Fuselage skin blend out repair within allowable damage in accordance with 737-600 SRM 53-
00-01, 737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-
01, 737-800 SRM 53-00-01, 737-800BCF SRM 53-00-01, or 737-900 SRM 53-00-01.
(b) For airplanes which have incorporated Boeing Business Jet (BBJ) Lower Cabin Altitude Supplemental
Type Certificate (STC) ST01697SE (6500 feet maximum cabin altitude in lieu of 8000 feet) as referenced
in Boeing SB 737-21-1149, the compliance time must be reduced to one quarter.
Group 1, Configuration 4; Group 2:
Table 7: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
-Within 6,500 flight
cycles after the Revi-
sion 2 date of Re-
quirements Bulletin
737-53A1383 RB.
Before 15,000 total
flight cycles.
Do an internal general visual in-
spection of the forward galley
door cutout stub frame for any
repair.
(a)
All Airplanes.
-Within 6,500 flight
cycles after the Revi-
sion 2 date of Re-
quirements Bulletin
737-53A1383 RB.
Before 15,000 total
flight cycles.
Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
CONDITION 13:
ANY REPAIR FOUND.
-Within 6,500 flight
cycles after the Revi-
sion 2 date of Re-
quirements Bulletin
737-53A1383 RB.
Before 15,000 total
flight cycles.
Do an internal HFEC inspection
of the stub frame at the forward
galley door cutout for any crack.
CONDITION 14:
NO REPAIR FOUND.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
33 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 34

Group 1, Configuration 4; Group 2:
Table 7: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
-Before further flight.ACTION 1:CONDITION 14.1:
Replace the stub frame.ANY CRACK FOUND.
-At the time specified in Table 8.ACTION 2:
Do the actions specified in Ta-
ble 8.
18,000
flight cy-
cles.
-Repeat the internal HFEC in-
spection of the stub frame at the
forward galley door cutout for
any crack.
CONDITION 14.2:
NO CRACK FOUND
AND ONE OF THE
FOLLOWING CONDI-
TIONS:
- OPTION 1 INSPEC-
TION SPECIFIED IN
TABLE 1 OR TABLE 3
HAS BEEN CHOSEN.
- OPTION 2 INSPEC-
TION SPECIFIED IN
TABLE 2 OR TABLE 4
HAS BEEN CHOSEN;
AND THE LAST TABLE
2 OR TABLE 4 AC-
TION ACCOM-
PLISHED WAS AN IN-
TERNAL HFEC IN-
SPECTION OF THE
FORWARD GALLEY
DOOR BEAR STRAP.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
34 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 35

Group 1, Configuration 4; Group 2:
Table 7: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
18,000
flight cy-
cles.
Within 12,000 flight cycles after the first
internal HFEC inspection of the stub frame
was done.
Repeat the internal HFEC in-
spection of the stub frame at the
forward galley door cutout for
any crack.
CONDITION 14.3:
NO CRACK FOUND
AND OPTION 2 IN-
SPECTION SPECI-
FIED IN TABLE 2 OR
TABLE 4 HAS BEEN
CHOSEN; AND THE
LAST TABLE 2 OR TA-
BLE 4 ACTION AC-
COMPLISHED WAS
AN EXTERNAL LFEC
INSPECTION OF THE
FORWARD GALLEY
DOOR BEAR STRAP
AND AN EXTERNAL
HFEC INSPECTION
OF THE FUSELAGE
SKIN ON WHICH NO
CRACKING OF THE
BEAR STRAP AND
FUSELAGE SKIN WAS
FOUND.
(b)(c)
(a) The following are not to be considered as repairs for the purpose of evaluating the conditions of this table.
They must be treated as unrepaired area/no repair found for this table.
1. Replacement of forward galley door cutout stub frame in accordance with Boeing installation
drawings (141A8370 and 141A8380) or 737-600 SRM 53-10-01, 737-700 SRM 53-10-01, 737-
700CONV SRM 53-10-01, 737-700IGW (BBJ) SRM 53-10-01, 737-800 SRM 53-10-01, 737-
800BCF SRM 53-10-01, 737-900 SRM 53-10-01, or 737-900ER SRM 53-10-01 Repair 6 dated
March 10, 2025, or later approved revisions.
2. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, 737-900 SRM 51-40-05, or 737-900ER SRM
51-40-05.
3. Fuselage skin blend out repair within allowable damage in accordance with 737-600 SRM 53-
00-01, 737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-
01, 737-800 SRM 53-00-01, 737-800BCF SRM 53-00-01, 737-900 SRM 53-00-01, or 737-900ER
SRM 53-00-01.
(b) The first repeat interval of the internal HFEC inspection of the stub frame is not to exceed 12,000 flight
cycles. Subsequent repeat interval of the internal HFEC inspection of the stub frame is not to exceed
18,000 flight cycles. The difference is to align stub frame and bear strap inspections concurrently.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
35 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 36

Group 1, Configuration 4; Group 2:
Table 7: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
(c) For airplanes which have incorporated Boeing Business Jet (BBJ) Lower Cabin Altitude Supplemental
Type Certificate (STC) ST01697SE (6500 feet maximum cabin altitude in lieu of 8000 feet) as referenced
in Boeing SB 737-21-1149, the compliance time must be reduced to one quarter.
Table 8: Stub Frame Post-Replacement Inspection - Internal High Frequency Eddy Current (HFEC) In-
spection of the Stub Frame
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
-Within 18,000 flight cycles after the stub
frame replacement was done.
Do an internal HFEC inspection
of the stub frame at the forward
galley door cutout for any crack.
Airplanes that have ac-
complished stub frame
replacement in accor-
dance with Boeing in-
stallation drawings
(141A8370 and
141A8380) or 737-600
SRM 53-10-01, 737-
700 SRM 53-10-01,
737-700CONV SRM
53-10-01, 737-700IGW
(BBJ) SRM 53-10-01,
737-800 SRM 53-10-
01, 737-800BCF SRM
53-10-01, 737-900
SRM 53-10-01, or 737-
900ER SRM 53-10-01
Repair 6 dated March
10, 2025, or later ap-
proved revisions.
-Before further flight.ACTION 1:CONDITION 15:
Replace the stub frame.ANY CRACK FOUND.
-Within 18,000 flight cycles after the stub
frame replacement was done.
ACTION 2:
Do an internal HFEC inspection
of the stub frame at the forward
galley door cutout for any crack.
(a)
18,000
flight cy-
cles.
-Repeat the internal HFEC in-
spection of the stub frame at the
forward galley door cutout for
any crack.
CONDITION 16:
NO CRACK FOUND.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
36 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 37

Table 8: Stub Frame Post-Replacement Inspection - Internal High Frequency Eddy Current (HFEC) In-
spection of the Stub Frame
Repeat
Interval
(Not to
Exceed)
Boeing Recommended Compliance
Time
(Whichever Occurs Later)
ActionCondition
(a) Refer to the applicable CONDITION for further ACTIONS.
4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA) approved for all EASA approved airplanes listed in this Requirements
Bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery
configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
This Requirements Bulletin is also approved for airplanes converted into 737-800BCF under project number
TS14-0042 that have incorporated Boeing drawing 800A0003 specified in the Type Certification Data Sheet
A16WE.
This Requirements Bulletin is also approved for 737-700/-800/-900 airplanes having FAA Aviation Partners
Boeing (APB) Supplemental Type Certificate (STC) number ST00830SE installed (not including any areas
affected by the split scimitar winglet configuration).
For 737-700IGWs designated as BBJs (YG001-YG103, YG111-YG123), 737-800s designated as BBJ2s
(YD401-YD403), and 737-700C designated as BBJ Convertible (YG701) that have APB winglets installed
by STC number ST00830SE, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin if the bulletin is in the area affected by blended winglets.
The Manager of the FAA Continued Operational Safety Branch approves accomplishment of the inspections
and corrective actions defined in this bulletin revision as an alternative method of compliance to the inspection
and corrective action requirements of paragraph (g) of AD 2021-02-13. All provisions of AD 2021-02-13
that are not specifically referenced in the above statement remain fully applicable and must be complied
with accordingly.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
37 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 38

Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
38 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT
BLANK PAGE

### Page 39

5.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. In the RB, the "Refer to the listed procedures..." column of the
table(s) in the Work Instructions is for reference only. The procedures in that column
are not required by the AD and are for guidance only. For the related SB, some
locations are marked RC Start and RC End to identify the requirements that are
restated from the RB. For the related SB, the areas between RC Start and RC End,
including sub-steps and any figures identified between RC Start and RC End, must
be done to comply with the AD. Therefore, an Alternative Method of Compliance
(AMOC) is required for any deviations to steps between RC Start and RC End,
including substeps and identified figures. For the related SB, the steps not between
RC Start and RC End may be deviated from using accepted methods in accordance
with the operator's maintenance or inspection program without obtaining approval
of an AMOC; this is provided that the steps between RC Start and RC End, including
sub-steps and identified figures, can still be done as specified, and the airplane can
be put back in an airworthy condition. Figures not required for compliance are omitted
from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. Boeing Service Letter 737-SL-51-042, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 737 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 737
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
39 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 40

6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
7. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
8. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
9. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
10. A General Visual Inspection (GVI) is defined as: A visual examination of an interior
or exterior area, installation or assembly to detect obvious damage, failure or
irregularity. This level of inspection is made from within touching distance, unless
otherwise specified. A mirror may be necessary to enhance visual access to all
exposed surfaces in the inspection area. This level of inspection is made under
normally available lighting conditions such as daylight, hangar lighting, flashlight or
drop-light and may require removal or opening of access panels or doors. Stands,
ladders or platforms may be required to gain proximity to the area being checked.
Basic cleaning may be required to ensure appropriate visibility.
11. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION,
do all of the ACTION numbers for that CONDITION or OPTION.
12. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
13. Refer to Boeing Picture Sheet Data List (PSDL) for drawing general information and
drawing flagnotes. Refer to Parts List (PL) and Module Parts List (MPL) for part
general information.
B. WORK INSTRUCTIONS
Actions Required for Compliance
1. Requirements:
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
40 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 41

Group 1, Configuration 1, 4:
Table 1: Option 1 - Internal High Frequency Eddy Current (HFEC) Inspection of the Forward Galley Door
Bear Strap
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
Do PART 1: GET AC-
CESS.
-Do an internal general visual in-
spection of the bear strap and
an external general visual in-
spection of fuselage skin and
gap cover for any repair.
All Airplanes.
-FIGURE 1 and
FIGURE 3
(a)
--Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
CONDITION 1:
ANY REPAIR FOUND. Do PART 2: CLOSE AC-
CESS.
-
(c)
-FIGURE 2Do an internal HFEC inspection
of the forward galley door bear
strap for any crack.
CONDITION 2:
NO REPAIR FOUND.
-737-600 SRM 53-10-01,
737-700 SRM 53-10-01,
737-700CONV SRM 53-
10-01, 737-700IGW (BBJ)
SRM 53-10-01, 737-800
SRM 53-10-01, or 737-
900 SRM 53-10-01 Re-
pair 6 dated March 10,
2020, or later approved
revisions,
Do repair of any bear strap
crack found.
CONDITION 2.1:
ANY CRACK FOUND.
OR
737-800BCF SRM 53-10-
01 Repair 6 dated March
10, 2025, or later ap-
proved revisions.
Do PART 2: CLOSE AC-
CESS.
-
Do PART 2: CLOSE AC-
CESS.
--CONDITION 2.2:
NO CRACK FOUND.
Do PART 1: GET AC-
CESS.
-Repeat the internal HFEC in-
spection of the forward galley
door bear strap for any crack. -FIGURE 2(b)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
41 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 42

Group 1, Configuration 1, 4:
Table 1: Option 1 - Internal High Frequency Eddy Current (HFEC) Inspection of the Forward Galley Door
Bear Strap
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
(a) The following are not to be considered as repairs for the purpose of evaluating the conditions of this table.
They must be treated as unrepaired area/no repair found for this table.
1. Replacement of gap cover in accordance with Boeing installation drawings (141A8350).
2. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, or 737-900 SRM 51-40-05.
3. Fuselage skin blend out repair within allowable damage in accordance with 737-600 SRM 53-
00-01, 737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-
01, 737-800 SRM 53-00-01, 737-800BCF SRM 53-00-01, or 737-900 SRM 53-00-01.
(b) It is not required to do the internal HFEC inspection in areas where a repair covers the affected inspection
zone if the repair meets the conditions that follow:
1. The repair is the corrective action to the forward galley door bear strap crack condition identified
in Requirements Bulletin 737-53A1383 RB and installed after the Original Issue date of Require-
ments Bulletin 737-53A1383 RB, and
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9 or the installed repair was accomplished in accordance with one of the
following:
– 737-600 SRM 53-10-01, 737-700 SRM 53-10-01, 737-700CONV SRM 53-10-01, 737-700IGW
(BBJ) SRM 53-10-01, 737-800 SRM 53-10-01, or 737-900 SRM 53-10-01 Repair 6 dated
March 10, 2020, or later approved revisions.
– 737-800BCF SRM 53-10-01 Repair 6 dated March 10, 2025, or later approved revisions.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
42 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 43

Group 1, Configuration 1, 4:
Table 1: Option 1 - Internal High Frequency Eddy Current (HFEC) Inspection of the Forward Galley Door
Bear Strap
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
(c) It is not required to contact The Boeing Company for alternative inspection(s) in areas where a repair
covers the affected inspection zone if the repair meets the conditions that follow:
1. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9 and post-repair inspections are accomplished in accordance with the
schedule repair approval listed on the FAA Form 8100-9, OR
2. The installed repair and post-repair inspections were accomplished in accordance with one of
the following:
– 737-600 SRM 53-10-01, 737-700 SRM 53-10-01, 737-700CONV SRM 53-10-01, 737-700IGW
(BBJ) SRM 53-10-01, 737-800 SRM 53-10-01, or 737-900 SRM 53-10-01 Repair 6 dated
March 10, 2020, or later approved revisions.
– 737-800BCF SRM 53-10-01 Repair 6 dated March 10, 2025, or later approved revisions.
Group 1, Configuration 2-4:
Table 2: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
-FIGURE 3Do an external general visual
inspection of the gap cover and
fuselage skin for any external
repair.
All Airplanes.
(a)
--Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
CONDITION 3:
ANY EXTERNAL RE-
PAIR FOUND.
(d)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
43 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 44

Group 1, Configuration 2-4:
Table 2: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
-FIGURE 4Do an external LFEC inspection
of the forward galley door bear
strap and external HFEC inspec-
tion of the fuselage skin for any
crack.
CONDITION 4:
NO EXTERNAL RE-
PAIR FOUND.
-737-600 SRM 53-10-01,
737-700 SRM 53-10-01,
737-700CONV SRM 53-
10-01, 737-700IGW (BBJ)
SRM 53-10-01, 737-800
SRM 53-10-01, or 737-
900 SRM 53-10-01 Re-
pair 6 dated March 10,
2020, or later approved
revisions,
Do repair of any bear strap
crack found and any fuselage
skin crack found.
CONDITION 4.1:
ANY CRACK FOUND
DURING THE EXTER-
NAL LFEC AND EX-
TERNAL HFEC IN-
SPECTIONS.
OR
737-800BCF SRM 53-10-
01 Repair 6 dated March
10, 2025, or later ap-
proved revisions.
Do PART 1: GET AC-
CESS.
-Do an internal general visual in-
spection of the forward galley
door bear strap for any internal
repair.
CONDITION 4.2:
NO CRACK FOUND
DURING THE EXTER-
NAL LFEC AND EX-
TERNAL HFEC IN-
SPECTIONS.
-FIGURE 1
(b)
--Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
CONDITION 4.2.1:
ANY INTERNAL RE-
PAIR FOUND. Do PART 2: CLOSE AC-CESS.-
(d)
-FIGURE 2Do an internal HFEC inspection
of the forward galley door bear
strap for any crack.
CONDITION 4.2.2:
NO INTERNAL RE-
PAIR FOUND.
(c)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
44 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 45

Group 1, Configuration 2-4:
Table 2: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
-737-600 SRM 53-10-01,
737-700 SRM 53-10-01,
737-700CONV SRM 53-
10-01, 737-700IGW (BBJ)
SRM 53-10-01, 737-800
SRM 53-10-01, or 737-
900 SRM 53-10-01 Re-
pair 6 dated March 10,
2020, or later approved
revisions,
Do repair of any bear strap
crack found.
CONDITION 4.2.2.1:
ANY CRACK FOUND
DURING THE INTER-
NAL HFEC INSPEC-
TION.
OR
737-800BCF SRM 53-10-
01 Repair 6 dated March
10, 2025, or later ap-
proved revisions.
Do PART 2: CLOSE AC-
CESS.
-
Do PART 2: CLOSE AC-
CESS.
--CONDITION 4.2.2.2:
NO CRACK FOUND
DURING THE INTER-
NAL HFEC INSPEC-
TION.
Do PART 1: GET AC-
CESS.
-Repeat the internal HFEC in-
spection of the forward galley
door bear strap for any crack. -FIGURE 2(c)
(a) The following are not to be considered as external repairs for the purpose of evaluating the conditions of
this table. They must be treated as unrepaired area/no repair found for this table.
1. Replacement of gap cover in accordance with Boeing installation drawings (141A8350).
2. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, or 737-900 SRM 51-40-05.
3. Fuselage skin blend out repair within allowable damage in accordance with 737-600 SRM 53-
00-01, 737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-
01, 737-800 SRM 53-00-01, 737-800BCF SRM 53-00-01, or 737-900 SRM 53-00-01.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
45 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 46

Group 1, Configuration 2-4:
Table 2: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
(b) The following are not to be considered as internal repairs for the purpose of evaluating the conditions of
this table. They must be treated as unrepaired area/no repair found for this table. It is not required to
contact The Boeing Company for alternative inspection(s) if one or a combination of the following has
been installed:
1. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, or 737-900 SRM 51-40-05.
2. Bear strap blend out repair within allowable damage in accordance with 737-600 SRM 53-00-01,
737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-01, 737-
800 SRM 53-00-01, 737-800BCF SRM 53-00-01, or 737-900 SRM 53-00-01.
(c) It is not required to do the internal HFEC inspection in areas where a repair covers the affected inspection
zone if the repair meets the conditions that follow:
1. The repair is the corrective action to the forward galley door bear strap crack condition identified
in Requirements Bulletin 737-53A1383 RB and installed after the Original Issue date of Require-
ments Bulletin 737-53A1383 RB, and
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9 or the installed repair was accomplished in accordance with one of the
following:
– 737-600 SRM 53-10-01, 737-700 SRM 53-10-01, 737-700CONV SRM 53-10-01, 737-700IGW
(BBJ) SRM 53-10-01, 737-800 SRM 53-10-01, or 737-900 SRM 53-10-01 Repair 6 dated
March 10, 2020, or later approved revisions.
– 737-800BCF SRM 53-10-01 Repair 6 dated March 10, 2025, or later approved revisions.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
46 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 47

Group 1, Configuration 2-4:
Table 2: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
(d) It is not required to contact The Boeing Company for alternative inspection(s) in areas where a repair
covers the affected inspection zone if the repair meets the conditions that follow:
1. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9 and post-repair inspections are accomplished in accordance with the
schedule repair approval listed on the FAA Form 8100-9, OR
2. The installed repair and post-repair inspections were accomplished in accordance with one of
the following:
– 737-600 SRM 53-10-01, 737-700 SRM 53-10-01, 737-700CONV SRM 53-10-01, 737-700IGW
(BBJ) SRM 53-10-01, 737-800 SRM 53-10-01, or 737-900 SRM 53-10-01 Repair 6 dated
March 10, 2020, or later approved revisions.
– 737-800BCF SRM 53-10-01 Repair 6 dated March 10, 2025, or later approved revisions.
Group 2, Configuration 1, 3:
Table 3: Option 1 - Internal High Frequency Eddy Current (HFEC) Inspection of the Forward Galley Door
Bear Strap
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
Do PART 1: GET AC-
CESS.
-Do an internal general visual in-
spection of the bear strap and
an external general visual in-
spection of fuselage skin and
gap cover for any repair.
All Airplanes.
-FIGURE 1 and
FIGURE 3
(a)
--Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
CONDITION 5:
ANY REPAIR FOUND. Do PART 2: CLOSE AC-
CESS.
-
(c)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
47 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 48

Group 2, Configuration 1, 3:
Table 3: Option 1 - Internal High Frequency Eddy Current (HFEC) Inspection of the Forward Galley Door
Bear Strap
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
-FIGURE 2Do an internal HFEC inspection
of the forward galley door bear
strap for any crack.
CONDITION 6:
NO REPAIR FOUND.
-737-600 SRM 53-10-01,
737-700 SRM 53-10-01,
737-700CONV SRM 53-
10-01, 737-700IGW (BBJ)
SRM 53-10-01, 737-800
SRM 53-10-01, 737-
800BCF SRM 53-10-01,
737-900 SRM 53-10-01,
or 737-900ER SRM 53-
10-01 Repair 6 dated
March 10, 2025, or later
approved revisions.
Do repair of any bear strap
crack found.
CONDITION 6.1:
ANY CRACK FOUND.
Do PART 2: CLOSE AC-
CESS.
-
Do PART 2: CLOSE AC-
CESS.
--CONDITION 6.2:
NO CRACK FOUND.
Do PART 1: GET AC-
CESS.
-Repeat the internal HFEC in-
spection of the forward galley
door bear strap for any crack. -FIGURE 2(b)
(a) The following are not to be considered as repairs for the purpose of evaluating the conditions of this table.
They must be treated as unrepaired area/no repair found for this table.
1. Replacement of gap cover in accordance with Boeing installation drawings (141A8350).
2. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, 737-900 SRM 51-40-05, or 737-900ER SRM
51-40-05.
3. Fuselage skin blend out repair within allowable damage in accordance with 737-600 SRM 53-
00-01, 737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-
01, 737-800 SRM 53-00-01, 737-800BCF SRM 53-00-01, 737-900 SRM 53-00-01, or 737-900ER
SRM 53-00-01.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
48 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 49

Group 2, Configuration 1, 3:
Table 3: Option 1 - Internal High Frequency Eddy Current (HFEC) Inspection of the Forward Galley Door
Bear Strap
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
(b) It is not required to do the internal HFEC inspection in areas where a repair covers the affected inspection
zone if the repair meets the conditions that follow:
1. The repair is the corrective action to the forward galley door bear strap crack condition identified
in Requirements Bulletin 737-53A1383 RB and installed after the Revision 2 date of Requirements
Bulletin 737-53A1383 RB, and
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9 or the installed repair was accomplished in accordance with 737-600
SRM 53-10-01, 737-700 SRM 53-10-01, 737-700CONV SRM 53-10-01, 737-700IGW (BBJ) SRM
53-10-01, 737-800 SRM 53-10-01, 737-800BCF SRM 53-10-01, 737-900 SRM 53-10-01, or 737-
900ER SRM 53-10-01 Repair 6 dated March 10, 2025, or later approved revisions.
(c) It is not required to contact The Boeing Company for alternative inspection(s) in areas where a repair
covers the affected inspection zone if the repair meets the conditions that follow:
1. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9 and post-repair inspections are accomplished in accordance with the
schedule repair approval listed on the FAA Form 8100-9, OR
2. The installed repair and post-repair inspections were accomplished in accordance with 737-600
SRM 53-10-01, 737-700 SRM 53-10-01, 737-700CONV SRM 53-10-01, 737-700IGW (BBJ) SRM
53-10-01, 737-800 SRM 53-10-01, 737-800BCF SRM 53-10-01, 737-900 SRM 53-10-01, or 737-
900ER SRM 53-10-01 Repair 6 dated March 10, 2025, or later approved revisions.
Group 2, Configuration 2-3:
Table 4: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
-FIGURE 3Do an external general visual
inspection of the gap cover and
fuselage skin for any external
repair.
All Airplanes.
(a)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
49 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 50

Group 2, Configuration 2-3:
Table 4: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
--Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
CONDITION 7:
ANY EXTERNAL RE-
PAIR FOUND.
(d)
-FIGURE 4Do an external LFEC inspection
of the forward galley door bear
strap and external HFEC inspec-
tion of the fuselage skin for any
crack.
CONDITION 8:
NO EXTERNAL RE-
PAIR FOUND.
-737-600 SRM 53-10-01,
737-700 SRM 53-10-01,
737-700CONV SRM 53-
10-01, 737-700IGW (BBJ)
SRM 53-10-01, 737-800
SRM 53-10-01, 737-
800BCF SRM 53-10-01,
737-900 SRM 53-10-01,
or 737-900ER SRM 53-
10-01 Repair 6 dated
March 10, 2025, or later
approved revisions.
Do repair of any bear strap
crack found and any fuselage
skin crack found.
CONDITION 8.1:
ANY CRACK FOUND
DURING THE EXTER-
NAL LFEC AND EX-
TERNAL HFEC IN-
SPECTIONS.
Do PART 1: GET AC-
CESS.
-Do an internal general visual in-
spection of the forward galley
door bear strap for any internal
repair.
CONDITION 8.2:
NO CRACK FOUND
DURING THE EXTER-
NAL LFEC AND EX-
TERNAL HFEC IN-
SPECTIONS.
-FIGURE 1
(b)
--Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
CONDITION 8.2.1:
ANY INTERNAL RE-
PAIR FOUND. Do PART 2: CLOSE AC-CESS.-
(d)
-FIGURE 2Do an internal HFEC inspection
of the forward galley door bear
strap for any crack.
CONDITION 8.2.2:
NO INTERNAL RE-
PAIR FOUND.
(c)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
50 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 51

Group 2, Configuration 2-3:
Table 4: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
-737-600 SRM 53-10-01,
737-700 SRM 53-10-01,
737-700CONV SRM 53-
10-01, 737-700IGW (BBJ)
SRM 53-10-01, 737-800
SRM 53-10-01, 737-
800BCF SRM 53-10-01,
737-900 SRM 53-10-01,
or 737-900ER SRM 53-
10-01 Repair 6 dated
March 10, 2025, or later
approved revisions.
Do repair of any bear strap
crack found.
CONDITION 8.2.2.1:
ANY CRACK FOUND
DURING THE INTER-
NAL HFEC INSPEC-
TION.
Do PART 2: CLOSE AC-
CESS.
-
Do PART 2: CLOSE AC-
CESS.
--CONDITION 8.2.2.2:
NO CRACK FOUND
DURING THE INTER-
NAL HFEC INSPEC-
TION.
Do PART 1: GET AC-
CESS.
-Repeat the internal HFEC in-
spection of the forward galley
door bear strap for any crack. -FIGURE 2(c)
(a) The following are not to be considered as external repairs for the purpose of evaluating the conditions of
this table. They must be treated as unrepaired area/no repair found for this table.
1. Replacement of gap cover in accordance with Boeing installation drawings (141A8350).
2. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, 737-900 SRM 51-40-05, or 737-900ER SRM
51-40-05.
3. Fuselage skin blend out repair within allowable damage in accordance with 737-600 SRM 53-
00-01, 737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-
01, 737-800 SRM 53-00-01, 737-800BCF SRM 53-00-01, 737-900 SRM 53-00-01, or 737-900ER
SRM 53-00-01.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
51 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 52

Group 2, Configuration 2-3:
Table 4: Option 2 - External High Frequency Eddy Current (HFEC) Inspection of the Fuselage Skin, Ex-
ternal Low Frequency Eddy Current (LFEC) Inspection and Internal HFEC Inspection of the Forward
Galley Door Bear Strap
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
(b) The following are not to be considered as internal repairs for the purpose of evaluating the conditions of
this table. They must be treated as unrepaired area/no repair found for this table. It is not required to
contact The Boeing Company for alternative inspection(s) if one or a combination of the following has
been installed:
1. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, 737-900 SRM 51-40-05, or 737-900ER SRM
51-40-05.
2. Bear strap blend out repair within allowable damage in accordance with 737-600 SRM 53-00-01,
737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-01, 737-
800 SRM 53-00-01, 737-800BCF SRM 53-00-01, 737-900 SRM 53-00-01, or 737-900ER SRM
53-00-01.
(c) It is not required to do the internal HFEC inspection in areas where a repair covers the affected inspection
zone if the repair meets the conditions that follow:
1. The repair is the corrective action to the forward galley door bear strap crack condition identified
in Requirements Bulletin 737-53A1383 RB and installed after the Revision 2 date of Requirements
Bulletin 737-53A1383 RB, and
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9 or the installed repair was accomplished in accordance with 737-600
SRM 53-10-01, 737-700 SRM 53-10-01, 737-700CONV SRM 53-10-01, 737-700IGW (BBJ) SRM
53-10-01, 737-800 SRM 53-10-01, 737-800BCF SRM 53-10-01, 737-900 SRM 53-10-01, or 737-
900ER SRM 53-10-01 Repair 6 dated March 10, 2025, or later approved revisions.
(d) It is not required to contact The Boeing Company for alternative inspection(s) in areas where a repair
covers the affected inspection zone if the repair meets the conditions that follow:
1. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9 and post-repair inspections are accomplished in accordance with the
schedule repair approval listed on the FAA Form 8100-9, OR
2. The installed repair and post-repair inspections were accomplished in accordance with 737-600
SRM 53-10-01, 737-700 SRM 53-10-01, 737-700CONV SRM 53-10-01, 737-700IGW (BBJ) SRM
53-10-01, 737-800 SRM 53-10-01, 737-800BCF SRM 53-10-01, 737-900 SRM 53-10-01, or 737-
900ER SRM 53-10-01 Repair 6 dated March 10, 2025, or later approved revisions.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
52 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 53

Group 1, Configuration 1, 3:
Table 5: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
-FIGURE 5Do an internal general visual in-
spection of the forward galley
door cutout stub frame for any
repair.
All Airplanes.
(a)
--Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
CONDITION 9:
ANY REPAIR FOUND.
-FIGURE 6Do an internal HFEC inspection
of the stub frame at the forward
galley door cutout for any crack.
CONDITION 10:
NO REPAIR FOUND.
-Boeing installation draw-
ings 141A8370 and
141A8380.
ACTION 1:
Replace the stub frame.
CONDITION 10.1:
ANY CRACK FOUND.
(b)(c)
Do PART 3: ADJUST
AND TEST GALLEY
SERVICE DOOR.
-
--ACTION 2:
Do the actions specified in Ta-
ble 8.
-FIGURE 6Repeat the internal HFEC in-
spection of the stub frame at the
forward galley door cutout for
any crack.
CONDITION 10.2:
NO CRACK FOUND.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
53 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 54

Group 1, Configuration 1, 3:
Table 5: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
(a) The following are not to be considered as repairs for the purpose of evaluating the conditions of this table.
They must be treated as unrepaired area/no repair found for this table.
1. Replacement of forward galley door cutout stub frame in accordance with Boeing installation
drawings (141A8370 and 141A8380) or 737-600 SRM 53-10-01, 737-700 SRM 53-10-01, 737-
700CONV SRM 53-10-01, 737-700IGW (BBJ) SRM 53-10-01, 737-800 SRM 53-10-01, 737-
800BCF SRM 53-10-01, or 737-900 SRM 53-10-01 Repair 6 dated March 10, 2025, or later ap-
proved revisions.
2. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, or 737-900 SRM 51-40-05.
3. Fuselage skin blend out repair within allowable damage in accordance with 737-600 SRM 53-
00-01, 737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-
01, 737-800 SRM 53-00-01, 737-800BCF SRM 53-00-01, or 737-900 SRM 53-00-01.
(b) Boeing Picture Sheet Data List (PSDL) 141A8370 Revision C, Parts List (PL) 141A8370 Revision F, In-
stallation 141A8370-1, Assembly 141A8370-3, and Drawing (DWG) 141A8370 Sheets 1-3 are applicable
to airplane line numbers 1-197.
Boeing PSDL 141A8370 Revision C, PL 141A8370 Revision F, Installation 141A8370-11, Assembly
141A8370-13, and DWG 141A8370 Sheets 9-11 are applicable to airplane line numbers 198-1302.
Boeing PSDL 141A8370 Revision C, Module Parts List (MPL) 141A8370-11#A, Assembly 141A8370-13,
and DWG 141A8370 Sheets 9-11 are applicable to airplane line numbers 1303-1762.
(c) Boeing PSDL 141A8380 Revision A, PL 141A8380 Revision E, Installation 141A8380-1, and DWG
141A8380 Sheets 1-2 and 5 are applicable to airplane line numbers 1-9.
Boeing PSDL 141A8380 Revision A, PL 141A8380 Revision E, Installation 141A8380-8, and DWG
141A8380 Sheets 8-9 and 12 are applicable to airplane line numbers 10-299.
Boeing PSDL 141A8380 Revision A, PL 141A8380 Revision E, Installation 141A8380-9, and DWG
141A8380 Sheets 13-14 and 17 are applicable to airplane line numbers 300-1302.
Boeing PSDL 141A8380 Revision A, MPL 141A8380-9#A and, DWG 141A8380 Sheets 13-14 and 17 are
applicable to airplane line numbers 1303-1762.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
54 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 55

Group 1, Configuration 2:
Table 6: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
-FIGURE 5Do an internal general visual in-
spection of the forward galley
door cutout stub frame for any
repair.
All Airplanes.
(a)
--Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
CONDITION 11:
ANY REPAIR FOUND.
-FIGURE 6Do an internal HFEC inspection
of the stub frame at the forward
galley door cutout for any crack.
CONDITION 12:
NO REPAIR FOUND.
-Boeing installation draw-
ings 141A8370 and
141A8380.
ACTION 1:
Replace the stub frame.
CONDITION 12.1:
ANY CRACK FOUND.
(b)(c)
Do PART 3: ADJUST
AND TEST GALLEY
SERVICE DOOR.
-
--ACTION 2:
Do the actions specified in Ta-
ble 8.
-FIGURE 6Repeat the internal HFEC in-
spection of the stub frame at the
forward galley door cutout for
any crack.
CONDITION 12.2:
NO CRACK FOUND.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
55 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 56

Group 1, Configuration 2:
Table 6: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
(a) The following are not to be considered as repairs for the purpose of evaluating the conditions of this table.
They must be treated as unrepaired area/no repair found for this table.
1. Replacement of forward galley door cutout stub frame in accordance with Boeing installation
drawings (141A8370 and 141A8380) or 737-600 SRM 53-10-01, 737-700 SRM 53-10-01, 737-
700CONV SRM 53-10-01, 737-700IGW (BBJ) SRM 53-10-01, 737-800 SRM 53-10-01, 737-
800BCF SRM 53-10-01, or 737-900 SRM 53-10-01 Repair 6 dated March 10, 2025, or later ap-
proved revisions.
2. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, or 737-900 SRM 51-40-05.
3. Fuselage skin blend out repair within allowable damage in accordance with 737-600 SRM 53-
00-01, 737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-
01, 737-800 SRM 53-00-01, 737-800BCF SRM 53-00-01, or 737-900 SRM 53-00-01.
(b) Boeing Picture Sheet Data List (PSDL) 141A8370 Revision C, Parts List (PL) 141A8370 Revision F, In-
stallation 141A8370-1, Assembly 141A8370-3, and Drawing (DWG) 141A8370 Sheets 1-3 are applicable
to airplane line numbers 1-197.
Boeing PSDL 141A8370 Revision C, PL 141A8370 Revision F, Installation 141A8370-11, Assembly
141A8370-13, and DWG 141A8370 Sheets 9-11 are applicable to airplane line numbers 198-1302.
Boeing PSDL 141A8370 Revision C, Module Parts List (MPL) 141A8370-11#A, Assembly 141A8370-13,
and DWG 141A8370 Sheets 9-11 are applicable to airplane line numbers 1303-1762.
(c) Boeing PSDL 141A8380 Revision A, PL 141A8380 Revision E, Installation 141A8380-1, and DWG
141A8380 Sheets 1-2 and 5 are applicable to airplane line numbers 1-9.
Boeing PSDL 141A8380 Revision A, PL 141A8380 Revision E, Installation 141A8380-8, and DWG
141A8380 Sheets 8-9 and 12 are applicable to airplane line numbers 10-299.
Boeing PSDL 141A8380 Revision A, PL 141A8380 Revision E, Installation 141A8380-9, and DWG
141A8380 Sheets 13-14 and 17 are applicable to airplane line numbers 300-1302.
Boeing PSDL 141A8380 Revision A, MPL 141A8380-9#A, and DWG 141A8380 Sheets 13-14 and 17 are
applicable to airplane line numbers 1303-1762.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
56 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 57

Group 1, Configuration 4; Group 2:
Table 7: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
-FIGURE 5Do an internal general visual in-
spection of the forward galley
door cutout stub frame for any
repair.
All Airplanes.
(a)
--Contact The Boeing Company
for alternative inspection(s), do
the inspection(s) and applicable
on-condition action(s).
CONDITION 13:
ANY REPAIR FOUND.
-FIGURE 6Do an internal HFEC inspection
of the stub frame at the forward
galley door cutout for any crack.
CONDITION 14:
NO REPAIR FOUND.
-Boeing installation draw-
ings 141A8370 and
141A8380.
ACTION 1:
Replace the stub frame.
CONDITION 14.1:
ANY CRACK FOUND.
(b)(c)
Do PART 3: ADJUST
AND TEST GALLEY
SERVICE DOOR.
-
--ACTION 2:
Do the actions specified in Ta-
ble 8.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
57 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 58

Group 1, Configuration 4; Group 2:
Table 7: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
-FIGURE 6Repeat the internal HFEC in-
spection of the stub frame at the
forward galley door cutout for
any crack.
CONDITION 14.2:
NO CRACK FOUND
AND ONE OF THE
FOLLOWING CONDI-
TIONS:
- OPTION 1 INSPEC-
TION SPECIFIED IN
TABLE 1 OR TABLE 3
HAS BEEN CHOSEN.
- OPTION 2 INSPEC-
TION SPECIFIED IN
TABLE 2 OR TABLE 4
HAS BEEN CHOSEN;
AND THE LAST TABLE
2 OR TABLE 4 AC-
TION ACCOM-
PLISHED WAS AN IN-
TERNAL HFEC IN-
SPECTION OF THE
FORWARD GALLEY
DOOR BEAR STRAP.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
58 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 59

Group 1, Configuration 4; Group 2:
Table 7: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
-FIGURE 6Repeat the internal HFEC in-
spection of the stub frame at the
forward galley door cutout for
any crack.
CONDITION 14.3:
NO CRACK FOUND
AND OPTION 2 IN-
SPECTION SPECI-
FIED IN TABLE 2 OR
TABLE 4 HAS BEEN
CHOSEN; AND THE
LAST TABLE 2 OR TA-
BLE 4 ACTION AC-
COMPLISHED WAS
AN EXTERNAL LFEC
INSPECTION OF THE
FORWARD GALLEY
DOOR BEAR STRAP
AND AN EXTERNAL
HFEC INSPECTION
OF THE FUSELAGE
SKIN ON WHICH NO
CRACKING OF THE
BEAR STRAP AND
FUSELAGE SKIN WAS
FOUND.
(a) The following are not to be considered as repairs for the purpose of evaluating the conditions of this table.
They must be treated as unrepaired area/no repair found for this table.
1. Replacement of forward galley door cutout stub frame in accordance with Boeing installation
drawings (141A8370 and 141A8380) or 737-600 SRM 53-10-01, 737-700 SRM 53-10-01, 737-
700CONV SRM 53-10-01, 737-700IGW (BBJ) SRM 53-10-01, 737-800 SRM 53-10-01, 737-
800BCF SRM 53-10-01, 737-900 SRM 53-10-01, or 737-900ER SRM 53-10-01 Repair 6 dated
March 10, 2025, or later approved revisions.
2. Repair of up to second oversized fastener holes in accordance with 737-600 SRM 51-40-05,
737-700 SRM 51-40-05, 737-700CONV SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-
800 SRM 51-40-05, 737-800BCF SRM 51-40-05, 737-900 SRM 51-40-05, or 737-900ER SRM
51-40-05.
3. Fuselage skin blend out repair within allowable damage in accordance with 737-600 SRM 53-
00-01, 737-700 SRM 53-00-01, 737-700CONV SRM 53-00-01, 737-700IGW (BBJ) SRM 53-00-
01, 737-800 SRM 53-00-01, 737-800BCF SRM 53-00-01, 737-900 SRM 53-00-01, or 737-900ER
SRM 53-00-01.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
59 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

### Page 60

Group 1, Configuration 4; Group 2:
Table 7: Internal High Frequency Eddy Current (HFEC) Inspection of the Stub Frame
Refer to the listed proce-
dures in SB 737-
53A1383 Original Issue
or later approved revi-
sions as an accepted
procedure
Method of ComplianceActionCondition
(b) Boeing Picture Sheet Data List (PSDL) 141A8370 Revision C, Parts List (PL) 141A8370 Revision F, In-
stallation 141A8370-1, Assembly 141A8370-3, and Drawing (DWG) 141A8370 Sheets 1-3 are applicable
to airplane line numbers 1-197.
Boeing PSDL 141A8370 Revision C, PL 141A8370 Revision F, Installation 141A8370-11, Assembly
141A8370-13, and DWG 141A8370 Sheets 9-11 are applicable to airplane line numbers 198-1302.
Boeing PSDL 141A8370 Revision C, Module Parts List (MPL) 141A8370-11#A, Assembly 141A8370-13,
and DWG 141A8370 Sheets 9-11 are applicable to airplane line numbers 1303-5379.
Boeing PSDL 141A8370 Revision C, MPL 141A8370-11#B, Assembly 141A8370-13, and DWG 141A8370
Sheets 11 and 14-15 are applicable to airplane line numbers 5380-8592.
Boeing PSDL 141A8370 Revision C, MPL 141A8370-11#C, Assembly 141A8370-13, and DWG 141A8370
Sheets 11 and 17-18 are applicable to airplane line number 9103.
Boeing PSDL 141A8370 Revision C, MPL 141A8370-11#E, Assembly 141A8370-13, and DWG 141A8370
Sheets 11 and 21-22 are applicable to airplane line numbers 9274 and 9430.
(c) Boeing PSDL 141A8380 Revision A, PL 141A8380 Revision E, Installation 141A8380-1, and DWG
141A8380 Sheets 1-2 and 5 are applicable to airplane line numbers 1-9.
Boeing PSDL 141A8380 Revision A, PL 141A8380 Revision E, Installation 141A8380-8, and DWG
141A8380 Sheets 8-9 and 12 are applicable to airplane line numbers 10-299.
Boeing PSDL 141A8380 Revision A, PL 141A8380 Revision E, Installation 141A8380-9, and DWG
141A8380 Sheets 13-14 and 17 are applicable to airplane line numbers 300-1302.
Boeing PSDL 141A8380 Revision A, MPL 141A8380-9#A, and DWG 141A8380 Sheets 13-14 and 17 are
applicable to airplane line numbers 1303-1801.
Boeing PSDL 141A8380 Revision A, MPL 141A8380-9#B, and DWG 141A8380 Sheets 20-21 and 24 are
applicable to airplane line numbers 1802-8592.
Boeing PSDL 141A8380 Revision A, MPL 141A8380-9#C, and DWG 141A8380 Sheets 32-33 and 36 are
applicable to airplane line numbers 9103, 9274, and 9430.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: May 09, 2019
737-53A1383 RBRevision 3: July 30, 2025
60 of 79
REQUIREMENTS BULLETIN 737-53A1383
ALERTALERT

The text continues at https://openairdocs.org/service-documents/boeing/737-53a1383-rb/file/7e31ddf3976c.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
