# Boeing Alert Service Bulletin 737-57A1294: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2008-0669; AD 2010-01-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 737-57A1294](https://openairdocs.org/service-documents/boeing/737-57a1294.md)
- Title as filed: U.S. DOT/FAA - Boeing Service Bulletin 
- Pages: 34
- PDF: https://openairdocs.org/files/sha256/aa/c1/aac15f7e3ac911d1c06eb52061eec5e2fc814560bbe69144fe58830a837fca99
- Page: https://openairdocs.org/service-documents/boeing/737-57a1294/file/aac15f7e3ac9

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 1 of 34
 
 
ALERT ALERT
Commercial
Airplane
Group 737
ALERTALERT
Service Bulletin
Number: 737-57A1294
Date: April 23, 2007
ATA System: 5710
SUBJECT: WINGS - Wing Center Section - Upper and Lower Stringers - Drill Start Inspection and 
Repair
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2007 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable 
subject matter.  Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third 
parties.  Treatment of the document and the information it contains is governed by contract with Boeing.  For 
more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, 707, 717, 727, 737, 747, 757, 767, 777, BBJ, BOEING BUSINESS JET, DC-8, DC-9, DC-10, MD-10, 
MD-11, MD-80, MD-90, the Boeing logo and the Boeing livery are among the trademarks owned by Boeing or 
its subsidiaries. No intellectual property license (express or implied) is granted in connection with this document 
or otherwise.

### Page 2

BLANK PAGE
April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 2 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
BLANK PAGE

### Page 3

Table of Contents
April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 3 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
Table of Contents
Summary .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
1. PLANNING INFORMATION .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
A. Effectivity .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
1. Airplanes   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
2. Spares Affected .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  11
B. Concurrent Requirements  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  12
C. Reason .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  12
D. Description .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  12
E. Compliance.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  13
F. Approval .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  14
G. Manpower   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  14
H. Weight and Balance Changes  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
I. Electrical Load Data  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  15
J. References .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  .  .  .  15
1. Existing Data: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
2. Data supplied with this Service Bulletin:   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  15
3. Installation Drawings Used in the Preparation of this Service Bulletin: .  .  .  .  .  .  .  .  .  .  16
K. Publications Affected .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  16
L. Interchangeability and Intermixability of Parts  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  16
2. MATERIAL INFORMATION .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  17
A. Material - Price and Availability.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  17
B. Industry Support Information .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   .  17
C. Parts Necessary For Each Airplane  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  17
1. Kits/Parts: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  17
2. Parts and Materials Supplied by the Operator:  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  17
3. Parts Modified and Reidentified:   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  18
4. Parts Removed and Not Replaced: .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  18
D. Parts Necessary to Change Spares  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  18
E. Special Tooling - Price and Availability.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   18
F. Special Tooling Necessary to do this Service Bulletin .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  18
3. ACCOMPLISHMENT INSTRUCTIONS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  19
A. GENERAL INFORMATION   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  19
B. WORK INSTRUCTIONS .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  19
FIGURE  1: WING CENTER SECTION - LOWER STRINGERS - DRILL START INSPECTION  .  .  .  .  22
FIGURE  2: WING CENTER SECTION - UPPER STRINGERS - DRILL START INSPECTION   .  .  .  .  26
FIGURE  3: WING CENTER SECTION - UPPER AND LOWER STRINGERS - DRILL START HIGH
FREQUENCY EDDY CURRENT (HFEC) OPEN HOLE INSPECTION.  .  .  .  .  .  .  .  .  .  30
FIGURE  4: WING CENTER SECTION - UPPER AND LOWER STRINGERS - DRILL START FASTENER
INSTALLATION   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  3 2

### Page 4

Table of Contents
April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 4 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
BLANK PAGE

### Page 5

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 5 of 34
 
 
ALERT ALERT
Commercial
Airplane
Group 737
ALERTALERT
Service Bulletin
Number: 737-57A1294 Summary
Date: April 23, 2007
ATA System: 5710
SUBJECT: WINGS - Wing Center Section - Upper and Lower Stringers - Drill Start Inspection and 
Repair
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN 
PARAGRAPH 1.A., EFFECTIVITY.  IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE 
BULLETIN TO THE NEW OPERATOR.  IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE 
BULLETIN TO THE NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin gives instructions to inspect the free flange of the wing center section upper and lower 
stringers for drill starts and cracks. If the work given in this service bulletin is not accomplished, cracks could 
propagate from drill starts in the free flange of the wing center section upper and lower stringers and may go 
undetected. Undetected cracks could cause a loss of structural integrity of the wing center section and may 
result in a fuel leak.
Drill starts were found on the wing center section upper and lower stringers during a quality assurance 
inspection at the final assembly plant. The drill starts were caused by a manufacturing error during wing 
assembly. 
Airplane line number 1777 through 1842, 1844 through 1847, 1851 and 1852 require inspection. Airplane line 
numbers 1843, 1848, 1849, 1850 and 1853 through 1918 were inspected and/or repaired by Boeing. After line 
number 1918 the manufacturing process was changed to prevent further occurrences of drill starts in the wing 
center section upper and lower stringers.
Boeing Service Related Problem (SRP) 737-SRP-57-0201 is related to this service bulletin.

### Page 6

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 6 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
ACTION
Install landing gear downlock pins, defuel and drain the wing center section fuel tank, open the equipment 
cooling system and the fuel tank access panel doors. Do a detailed inspection of the wing center section upper 
and lower stringers for any drill starts. If a drill start is found, do a High Frequency Eddy Current (HFEC) open 
hole inspection for any crack. At each crack location do the zero-timing procedure as given in this service 
bulletin. If the hole is within the service bulletin tolerance limits, install a new fastener. If the hole exceeds the 
tolerance limits, contact Boeing for repair instructions. If no crack is found, increase the diameter of the hole and 
install a new fastener. Close access and put the airplane back into a serviceable condition.
EFFECTIVITY
737-600, -700 and -800 Airplanes. Refer to Paragraph 1.A.1., Airplanes for a list of affected airplanes.
COMPLIANCE
See Service Bulletin Paragraph 1.E. for compliance information.
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service 
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin 
mandatory.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of July 17, 2006. Please refer to Paragraph 
2.B., Industry Support Information.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operator Supplied Parts/Materials. 
Refer to Paragraph 2.A., Material - Price and Availability.

### Page 7

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 7 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
DO A DETAILED INSPECTION OF THE
WING CENTER SECTION UPPER AND LOWER
STRINGERS FOR ANY DRILL STARTS.
IF A DRILL START IS FOUND, DO A
HIGH FREQUENCY EDDY CURRENT (HFEC)
INSPECTION FOR ANY CRACK AND
INSTALL NEW FASTENER.
STA
664
STA
540
FWD
1338185

### Page 8

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 8 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
BLANK PAGE

### Page 9

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 9 of 34
 
 
ALERT ALERT
Commercial
Airplane
Group 737
ALERTALERT
Service Bulletin
Number: 737-57A1294
Date: April 23, 2007
ATA System: 5710
SUBJECT: WINGS - Wing Center Section - Upper and Lower Stringers - Drill Start Inspection and 
Repair
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN 
PARAGRAPH 1.A., EFFECTIVITY.  IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE 
BULLETIN TO THE NEW OPERATOR.  IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE 
BULLETIN TO THE NEW OWNER.
1. PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is for the airplanes shown below.
Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line 
Number, and Serial Number data.
Airplane models:
737-600 737-700 737-800
IDENTIFICATION BY CUSTOMER, CUSTOMER CODE, GROUP AND VARIABLE NUMBER
AEROMEXICO  (AMX)
1 YB874 YM503–YM506
AIR CHINA  (BEJ)
1Y B 5 9 2
AIR EUROPA  (ARE)
1Y K 6 0 2
GROUP CONFIGURATION DESCRIPTION
1 - 737-600, -700 and -800 Airplanes line number 
1777-1842, 1844-1847 and 1851-1852.

### Page 10

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 10 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
AIR NIPPON  (ANK)
1Y N 0 0 1
AIRTRAN AIRWAYS  (CQT)
1 YB382–YB385 YM205–YM206
CHINA EASTERN AIRLINES  (CEA)
1 YB578–YB579
CHINA SOUTHERN AIRLINES  (GUN)
1 YJ683–YJ685
CHINA XINJIANG AIRLINES  (XIJ)
1 YM572
CONTINENTAL AIRLINES  (CAL)
1 YJ548–YJ552
HAINAN AIRLINES  (HNA)
1 YK702–YK705
INTEGRATED DEFENSE SYSTEMS  (BSP)
1Y G 2 0 2 Y G 2 1 2
NOFA LTD.  (NFA)
1Y D 4 1 3
PEGASUS AVIATION FINANCE  (PSF)
1 YB590–YB591
QANTAS  (QAN)
1 YJ924–YJ927
RYANAIR  (RYR)
1 YJ854–YJ860 YK801–YK807
SHANDONG AIRLINES  (SHG)
1 YM552–YM553
SHANGHAI AIRLINES  (SHA)
1Y D 4 9 2
SIVA  (SVM)
1Y G 0 9 4
SKYMARK AIRLINES  (SKM)
1 YK611
SOUTHWEST AIRLINES  (SWA)
1 YM270–YM276
TURKISH AIRLINES  (THY)
1 YK551–YK552

### Page 11

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 11 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
VIRGIN BLUE AIRLINES  (VOZ)
1 YM522
VIZAVI  (VIZ)
1Y G 0 9 3
WESTJET  (WJI)
1 YB962–YB963 YE372–YE373
IDENTIFICATION BY VARIABLE NUMBER
2. Spares Affected
None.
Variable  Group
YB382–YB385 1
YB578–YB579 1
YB590–YB592 1
YB874 1
YB962–YB963 1
YD413 1
YD492 1
YE372–YE373 1
YG093–YG094 1
YG202 1
YG212 1
YJ548–YJ552 1
YJ683–YJ685 1
YJ854–YJ860 1
YJ924–YJ927 1
YK551–YK552 1
YK602 1
YK611 1
YK702–YK705 1
YK801–YK807 1
YM205–YM206 1
YM270–YM276 1
YM503–YM506 1
YM522 1
YM552–YM553 1
YM572 1
YN001 1

### Page 12

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 12 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
B. Concurrent Requirements
None.
C. Reason
This service bulletin gives instructions to inspect the free flange of the wing center section upper and 
lower stringers for drill starts and cracks. If the work given in this service bulletin is not accomplished, 
cracks could propagate from drill starts in the free flange of the wing center section upper and lower 
stringers and may go undetected. Undetected cracks could cause a loss of structural integrity of the 
wing center section and may result in a fuel leak.
Drill starts were found on the wing center section upper and lower stringers during a quality assurance 
inspection at the final assembly plant. The drill starts were caused by a manufacturing error during 
wing assembly. 
Airplane line number 1777 through 1842, 1844 through 1847, 1851 and 1852 require inspection. 
Airplane line numbers 1843, 1848, 1849, 1850 and 1853 through 1918 were inspected and/or repaired 
by Boeing. After line number 1918 the manufacturing process was changed to prevent further 
occurrences of drill starts in the wing center section upper and lower stringers.
Boeing Service Related Problem (SRP) 737-SRP-57-0201 is related to this service bulletin.
D. Description
Install landing gear downlock pins, defuel and drain the wing center section fuel tank, open the 
equipment cooling system and the fuel tank access panel doors. Do a detailed inspection of the wing 
center section upper and lower stringers for any drill starts. If a drill start is found, do a High Frequency 
Eddy Current (HFEC) open hole inspection for any crack. At each crack location do the zero-timing 
procedure as given in this service bulletin. If the hole is within the service bulletin tolerance limits, 
install a new fastener. If the hole exceeds the tolerance limits, contact Boeing for repair instructions. 
If no crack is found, increase the diameter of the hole and install a new fastener. Close access and 
put the airplane back into a serviceable condition.

### Page 13

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 13 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to 
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in 
this service bulletin mandatory.
Table 1: Inspection of the wing center section upper and lower stringers to minimize crack size
Condition Action Compliance Time
All airplanes. Do a detailed inspection of the wing 
center section lower stringers for any drill 
starts as given in the Accomplishment 
Instructions Paragraph 3.B.2. Part 2.
Before 9,000 total 
flight cycles. 
All airplanes. Do detailed inspection of the wing center 
section upper stringers for any drill starts 
as given in the Accomplishment 
Instructions Paragraph 3.B.3. Part 3.
Before 9,000 total 
flight cycles. 
Any drill start found. Do the High Frequency Eddy Current 
(HFEC) inspection for any crack as given 
in Accomplishment Instructions 
Paragraph 3.B.4. Part 4.
Before further flight.
Crack found and High Frequency 
Eddy Current (HFEC) inspected drill 
start holes are not within the limits 
given in this service bulletin.
Contact Boeing for repair instructions 
and repair.
Before further flight.
Crack found and High Frequency 
Eddy Current (HFEC) inspected drill 
start holes are within the limits given in 
this service bulletin.
Install fastener as given in 
Accomplishment Instructions Paragraph 
3.B.4. Part 4.
Before further flight.
No crack found and High Frequency 
Eddy Current (HFEC) inspected drill 
start holes are within the limits given in 
this service bulletin.
Install fastener as given in 
Accomplishment Instructions Paragraph 
3.B.4. Part 4.
Before further flight.
Table 2: Inspection of the wing center section lower stringers for safety
Condition Action Compliance Time
All airplanes. Do a detailed inspection of the wing 
center section lower stringers for any drill 
starts as given in the Accomplishment 
Instructions Paragraph 3.B.2. Part 2.
Before 18,000 total 
flight cycles. 
Any drill start found. Do the High Frequency Eddy Current 
(HFEC) inspection for any crack as given 
in Accomplishment Instructions 
Paragraph 3.B.4. Part 4.
Before further flight.

### Page 14

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 14 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes 
specified in this service bulletin comply with the applicable regulations and are FAA approved, as well 
as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/
JAA approved airplanes listed in the service bulletin effectivity. This service bulletin and its approval 
were based on the airplane in its original Boeing delivery configuration or as modified by other 
approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected 
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency 
approval before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task-hours necessary to do this inspection for each airplane. 
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator 
task-hour data if necessary. The estimate does not include lost time. These are some examples of lost 
time:
— Time to adjust to the workplace
— Time to schedule the work
— Time to examine the work
— Time to cure the materials
— Time to make the parts
— Time to find the tools.
Crack found and High Frequency 
Eddy Current (HFEC) inspected drill 
start holes are not within the limits 
given in this service bulletin.
Contact Boeing for repair instructions 
and repair.
Before further flight.
Crack found and High Frequency 
Eddy Current (HFEC) inspected drill 
start holes are within limits the given in 
this service bulletin.
Install fastener as given in 
Accomplishment Instructions Paragraph 
3.B.4. Part 4.
Before further flight.
No crack found and High Frequency 
Eddy Current (HFEC) inspected drill 
start holes are within the limits given in 
this service bulletin.
Install fastener as given in 
Accomplishment Instructions Paragraph 
3.B.4. Part 4.
Before further flight.
Wing Center Section Upper and Lower Stringer Drill Start Inspection
Task Number of Persons Task-Hours Elapsed Hours
Open Access 4 12.00 3.00
Figure 1 2 7.00 3.50
Figure 2 2 11.00 5.50
Figure 3 1 0.10(a) 0.10(a)
Figure 4 1 0.15(a) 0.15(a)
Close Access 4 5.00 1.25
Table 2: Inspection of the wing center section lower stringers for safety
Condition Action Compliance Time

### Page 15

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 15 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. 737-600 Structural Repair Manual (SRM) 51-20-01, 51-40-02, 51-40-05.
b. 737-600/700/800/900 Aircraft Maintenance Manual (AMM) 06-41-00, 12-11-00, 28-11-00, 
28-11-31, 28-26-00, 32-00-01.
c. 737-700 Structural Repair Manual (SRM) 51-20-01, 51-40-02, 51-40-05.
d. 737-700CONV Structural Repair Manual (SRM) 51-20-01, 51-40-02, 51-40-05.
e. 737-700IGW (BBJ) Structural Repair Manual (SRM) 51-20-01, 51-40-02, 51-40-05.
f. 737-800 Structural Repair Manual (SRM) 51-20-01, 51-40-02, 51-40-05.
g. 737 Non-Destructive Testing (NDT) Manual, Part 6, 51-00-00 Figure 11, Part 6, 51-00-00 
Figure 16.
h. Boeing Drawing 65-88700. 
i. Boeing Parts Standards Document D-590.
j. Service Related Problem (SRP) 737-SRP-57-0201.
k. Standard Overhaul Practices Manual (SOPM) 20-43-03.
2. Data supplied with this Service Bulletin:
None.
Fuel leak test 1 0.25 0.25
TOTAL FOR EACH AIRPLANE 35.25(b) 13.50(b)
(a) Time is for one hole location only.
(b) Total time does not include time in figures 3 or 4. 
Wing Center Section Upper and Lower Stringer Drill Start Inspection
Task Number of Persons Task-Hours Elapsed Hours

### Page 16

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 16 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
3. Installation Drawings Used in the Preparation of this Service Bulletin:
These drawings were used to prepare this service bulletin. These drawings are not necessary to 
make the specified changes, and are not supplied with this service bulletin. These drawings may 
not be applicable to all airplane configurations or operators.
K. Publications Affected
None.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
Drawing Number Title
111A3000 Upper Panel Instl - Wing Center Section
111A4000 Lower Panel Instl - Wing Center Section

### Page 17

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 17 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
2. MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are available for 737 airplanes in warranty as of July 17, 2006. For 
inspection task hour reimbursement for airplanes in warranty as of that date, send a warranty claim to 
Boeing Commercial Airplanes Group - Warranties. If the condition described in this service bulletin is 
found during the inspection for airplanes in warranty as of that date and additional task hours and kits, 
parts, and/or special tools are required, send a warranty claim to Boeing Commercial Airplanes Group 
- Warranties. Please refer to this service bulletin number and reference the airplane variable numbers 
in your purchase order.
C. Parts Necessary For Each Airplane
1. Kits/Parts:
None.
2. Parts and Materials Supplied by the Operator:
NOTE: The quantity of rivets given below is an estimate based on the number of drill starts
found by Boeing.
Part Number / Specification QTY Name Notes
BACR15FT5AD4C OR BACR15FT5D4C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT5AD5C OR BACR15FT5D5C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT5AD6C OR BACR15FT5D6C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT5AD7C OR BACR15FT5D7C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT5AD8C OR BACR15FT5D8C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT6AD4C OR BACR15FT6D4C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT6AD5C OR BACR15FT6D5C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT6AD6C OR BACR15FT6D6C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT6AD7C OR BACR15FT6D7C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT6AD8C OR BACR15FT6D8C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT7AD5C OR BACR15FT7D5C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT7AD6C OR BACR15FT7D6C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT7AD7C OR BACR15FT7D7C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT7AD8C OR BACR15FT7D8C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT7AD9C OR BACR15FT7D9C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT8AD5C OR BACR15FT8D5C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT8AD6C OR BACR15FT8D6C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT8AD7C OR BACR15FT8D7C 36 Rivet, Modified Universal Head (a)(b)(c)

### Page 18

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 18 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
3. Parts Modified and Reidentified:
None.
4. Parts Removed and Not Replaced:
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, 
maintenance and overhaul tools in the manuals given in Paragraph 1.J., References, can be 
necessary. Examine operator tool supply to make sure all necessary tools are available.
BACR15FT8AD8C OR BACR15FT8D8C 36 Rivet, Modified Universal Head (a)(b)(c)
BACR15FT8AD9C OR BACR15FT8D9C 36 Rivet, Modified Universal Head (a)(b)(c)
Type 2, Class A 4 Ounces Chemical Conversion Coating (d)
BMS 10-20, Type II 4 Ounces Primer (e)
(a) Refer to 737 Structural Repair Manual Chapter 51 for alternative fasteners.
(b) There are more parts than are necessary.
(c) This part is necessary if the hole diameter is increased.
(d) Refer to SOPM 20-43-03 or 737 Structural Repair Manual (SRM) Chapter 51 for material sources.
(e) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Part Number / Specification QTY Name Notes

### Page 19

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 19 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
3. ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES
CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE
SPARKS OR OTHER ELECTRICAL DAMAGE.
NOTE:
1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for 
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
— Linear dimensions are in inches.
— Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch.
— Hole dimensions for standard solid rivets are given in 737 Structural Repair 
Manual, Chapter 51.
4. For approved fastener and process material substitutions, refer to 737 Structural Repair 
Manual, Chapter 51, Alternate fasteners are given in 737 Structural Repair Manual 
Chapter 51 and Boeing Drawing 65-88700.
5. If the length of fasteners specified in this service bulletin do not meet the installation 
standards, fasteners of the same specification, or an approved substitute, one grip 
length longer or shorter may be used.
6. A Detailed Inspection is defined as: An intensive examination of a specific item, 
installation, or assembly to detect damage, failure, or irregularity. Available lighting is 
normally supplemented with a direct source of good lighting at an intensity deemed 
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be necessary. 
Surface cleaning and elaborate procedures may be required.
7. These work instructions refer to procedures included on other Boeing documents. When 
the words "refer to" are used and the operator has an accepted alternative procedure, 
the accepted alternative procedure can be used. When the words "as given in" are 
included in the instruction, the procedure in the Boeing document must be used.
B. WORK INSTRUCTIONS
1. PART 1 - ACCESS
a. Install landing gear downlock pins. Refer to 737-600/700/800/900 AMM 32-00-01 as an 
accepted procedure.
b. Defuel the wing center section fuel tank. Refer to 737-600/700/800/900 AMM 28-26-00 as 
accepted procedure.

### Page 20

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 20 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
c. Drain fuel from the sump of the wing center section fuel tank. Refer to 737-600/700/800/900 
AMM 12-11-00 as accepted procedure.
d. Purge the wing center section fuel tank and prepare it for entry. Refer to 737-600/700/800/
900 AMM 28-11-00 as an accepted procedure.
e. Open access door 192CL of the Equipment Cooling System (ECS). Refer to 737-600/700/
800/900 AMM 06-41-00 as an accepted procedure.
f. Remove keep wing center section fuel tank access panel door 131AB. Refer to 737-600/
700/800/900 AMM 28-11-31 as an accepted procedure.
NOTE: Operator may get additional access as required.
2. PART 2 - WING CENTER SECTION - LOWER STRINGER INSPECTION
a. Do a detailed inspection of the lower stringers for any drill start as given in Figure 1.
(1) If any drill start is found. Do the PART 4 - STRINGER REPAIR.
3. PART 3 - WING CENTER SECTION - UPPER STRINGER INSPECTION
a. Do a detailed inspection of the upper stringers for any drill start as given in Figure 2.
(1) If any drill start is found. Do the PART 4 - STRINGER REPAIR.
4. PART 4 - STRINGER REPAIR
a. At each drill start location, drill the drill start and do a High Frequency Eddy Current (HFEC) 
open hole inspection for any crack as given in Figure 3.
(1) If any crack is found, remove the crack as given in 737 NDT, Part 6, 51-00-00 Figure 
16 or 737 NDT, Part 6, 51-00-00 Figure 11.
(a) If final hole exceeds the diameter required for a 0.250 inch rivet or a 4D spacing 
to any adjacent fasteners or other drill plug holes can not be maintained or a 2D 
edge margin can not be maintained or the tail or head of fastener will be closer 
than 0.02 inch to the stringer fillet radius, contact Boeing for repair instructions.
(2) If no crack is found, increase the hole diameter by 0.0625 inch to make sure that any 
fatigue damage is removed.
(a) If final hole exceeds the diameter required for a 0.250 inch rivet or a 4D spacing 
to any adjacent fasteners or other drill plug holes can not be maintained or a 2D 
edge margin can not be maintained or the tail or head of fastener will be closer 
than 0.02 inch to the stringer fillet radius, contact Boeing for repair instructions.
b. At each drill start location, install a fastener as given in Figure 4.
5. PART 5 - CLOSE ACCESS
a. Install kept access panel door 131AB. Refer to 737-600/700/800/900 AMM 28-11-31 as an 
accepted procedure.

### Page 21

April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 21 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
b. Refuel the wing center section fuel tank. Refer to 737-600/700/800/900 AMM 12-11-00 as 
accepted procedure.
c. Do a fuel leak inspection of the wing center section fuel tank access panel door 131AB. 
Refer to 737-600/700/800/900 AMM 28-11-00 as an accepted procedure.
d. Close access doors 192CL. Refer to 737-600/700/800/900 AMM 06-41-00 as an accepted 
procedure.
e. Remove landing gear downlock pins. Refer to 737-600/700/800/900 AMM 32-00-01 as an 
accepted procedure.
f. Put the airplane back to a serviceable condition.

### Page 22

FIGURE 1: WING CENTER SECTION - LOWER STRINGERS - DRILL START INSPECTION
April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 22 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
FIGURE  1: WING CENTER SECTION - LOWER STRINGERS - DRILL START INSPECTION
STA
664
STA
540
FWD
ASEE
BSEE
A
1338089
(SHEET 1 OF 4)

### Page 23

FIGURE 1: WING CENTER SECTION - LOWER STRINGERS - DRILL START INSPECTION
April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 23 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
FWD
B
STA
545.8
STA
654.410 27 18 6 5 4 391112
S-14L
S-13L
S-12L S-10L
S-9L
S-8L
S-7L
S-5L
S-4L
S-3L
S-2L
S-1L
CSEE
LBL
45.5
LBL
69.95
RBL
69.95
BL
0.0
RBL
45.5
WING CENTER SECTION LOWER SKIN STRINGER LOCATION - VIEW LOOKING DOWN
1338094
(SHEET 2 OF 4)

### Page 24

FIGURE 1: WING CENTER SECTION - LOWER STRINGERS - DRILL START INSPECTION
April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 24 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
LOWER WING PANEL
LOWER STRINGER
FREE FLANGE
MIRROR
DRILL START
(TYPICAL)
C
1338127
(SHEET 3 OF 4)

### Page 25

FIGURE 1: WING CENTER SECTION - LOWER STRINGERS - DRILL START INSPECTION
April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 25 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY 
numbers shown below are the number of parts necessary to inspect
STEP TASK NAME IDENTIFICATION QTY MORE DATA
1 Inspect Stringer-1L - 1 (a)
2 Inspect Stringer-2L - 1 (a)
3 Inspect Stringer-3L - 1 (a)
4 Inspect Stringer-4L - 1 (a)
5 Inspect Stringer-5L - 1 (a)
6 Inspect Stringer-7L - 1 (a)
7 Inspect Stringer-8L - 1 (a)
8 Inspect Stringer-9L - 1 (a)
9 Inspect Stringer-10L - 1 (a)
10 Inspect Stringer-12L - 1 (a)
11 Inspect Stringer-13L - 1 (a)
12 Inspect Stringer-14L - 1 (a)
(a) Do a detailed inspection for drill starts on the entire length of the underside of the lower 
stringer free flange, stringer vertical web and the fillet radius between the free flange and 
vertical web.
(SHEET 4 OF 4)

### Page 26

FIGURE 2: WING CENTER SECTION - UPPER STRINGERS - DRILL START INSPECTION
April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 26 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
FIGURE  2: WING CENTER SECTION - UPPER STRINGERS - DRILL START INSPECTION
STA
664
STA
540
FWD
ASEE
BSEE
A
1338072
(SHEET 1 OF 4)

### Page 27

FIGURE 2: WING CENTER SECTION - UPPER STRINGERS - DRILL START INSPECTION
April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 27 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
FWD
RBL
45.5
BL
0.0
LBL
45.5
CSEE
27
1
8 6 5 4 39101517 1112131416
S-21U
S-20U
S-19U
S-18U
S-17U S-15U
S-14U
S-12U
S-10U
S-9U S-7U
S-6U
S-5U
S-4U
S-3U
S-2U
S-1U
STA
541.6
STA
655.4
B
WING CENTER SECTION UPPER SKIN STRINGER LOCATION - VIEW LOOKING UP
LBL
69.45
RBL
69.45
1338071
(SHEET 2 OF 4)

### Page 28

FIGURE 2: WING CENTER SECTION - UPPER STRINGERS - DRILL START INSPECTION
April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 28 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
UPPER WING PANEL
UPPER STRINGER
FREE FLANGE
MIRROR
DRILL START
(TYPICAL)
C
1338075
(SHEET 3 OF 4)

### Page 29

FIGURE 2: WING CENTER SECTION - UPPER STRINGERS - DRILL START INSPECTION
April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 29 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY 
numbers shown below are the number of parts necessary to inspect.
STEP TASK NAME IDENTIFICATION QTY MORE DATA
1 Inspect Stringer-1U - 1 (a)
2 Inspect Stringer-2U - 1 (a)
3 Inspect Stringer-3U - 1 (a)
4 Inspect Stringer-4U - 1 (a)
5 Inspect Stringer-5U - 1 (a)
6 Inspect Stringer-6U - 1 (a)
7 Inspect Stringer-7U - 1 (a)
8 Inspect Stringer-9U - 1 (a)
9 Inspect Stringer-10U - 1 (a)
10 Inspect Stringer-12U - 1 (a)
11 Inspect Stringer-14U - 1 (a)
12 Inspect Stringer-15U - 1 (a)
13 Inspect Stringer-17U - 1 (a)
14 Inspect Stringer-18U - 1 (a)
15 Inspect Stringer-19U - 1 (a)
16 Inspect Stringer-20U - 1 (a)
17 Inspect Stringer-21U - 1 (a)
(a)
Do a detailed inspection for drill starts on the entire length of the underside of the upper 
stringer free flange, stringer vertical web and the fillet radius between the free flange and 
vertical web.
(SHEET 4 OF 4)

### Page 30

FIGURE 3: WING CENTER SECTION - UPPER AND LOWER STRINGERS - DRILL START HIGH FRE-
QUENCY EDDY CURRENT (HFEC) OPEN HOLE INSPECTION
April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 30 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
FIGURE  3: WING CENTER SECTION - UPPER AND LOWER STRINGERS - DRILL START HIGH 
FREQUENCY EDDY CURRENT (HFEC) OPEN HOLE INSPECTION
FWD
ASEE
BSEE
A
B
FREE FLANGE
VERTICAL WEB
SKIN
SKIN
ATTACHMENT
FLANGE
21
TYPICAL STRINGER
1338136
(SHEET 1 OF 2)

### Page 31

FIGURE 3: WING CENTER SECTION - UPPER AND LOWER STRINGERS - DRILL START HIGH FRE-
QUENCY EDDY CURRENT (HFEC) OPEN HOLE INSPECTION
April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 31 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. 
STEP TASK NAME IDENTIFICATION QTY MORE DATA
1 Drill Drill Start - - (a)(b)
2 Inspect Hole - - (b)(c)(d)
(a) Drill out the drill start to 0.098 - 0.103 inch diameter.
(b)
Make sure the hole diameter does not exceed the diameter required for a 0.250 inch rivet. 
Maintain 4D spacing to any adjacent fasteners or other drill plug holes. Maintain a 2D edge 
margin. Make sure fastener tail or head is no closer than 0.02 inch to the stringer fillet radius.
(c) Do a High Frequency Eddy Current (HFEC) open hole inspection for any crack as given in 737 NDT, Part 6, 51-00-00 Figure 16 or 737 NDT, Part 6, 51-00-00 Figure 11.
(d)
Initial drill start holes without cracks must also be enlarged 0.0625 inch beyond the initial 
diameter. This “insurance cut” is needed to ensure that a crack too small to be detected by High 
Frequency Eddy Current (HFEC) inspection is fully removed.
(SHEET 2 OF 2)

### Page 32

FIGURE 4: WING CENTER SECTION - UPPER AND LOWER STRINGERS - DRILL START FASTENER 
INSTALLATION
April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 32 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
FIGURE  4: WING CENTER SECTION - UPPER AND LOWER STRINGERS - DRILL START FASTENER 
INSTALLATION 
FWD
ASEE
BSEE
A
B
FREE FLANGE
VERTICAL WEB
SKIN
SKIN
ATTACHMENT
FLANGE
21
TYPICAL STRINGER
3 4 5 ANC
1338164
(SHEET 1 OF 3)

### Page 33

FIGURE 4: WING CENTER SECTION - UPPER AND LOWER STRINGERS - DRILL START FASTENER 
INSTALLATION
April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 33 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
The codes shown below agree with the letter shown in the upper left corner of the fastener symbols in the figure. 
A number in the lower right corner gives the grip length of the fastener. The QTY numbers shown below are the 
number of fasteners necessary for this figure.
STEP TASK NAME IDENTIFICATION QTY MORE DATA
1 Drill Hole - - (a)(b)
2 Deburr Hole - - -
3
Apply Chemical 
Conversion 
Coating
Type 2, Class A - (c)
4 Install Fastener - - (d)(e)
5 Apply Primer BMS 10-20, Type II - (c)
(a) This step is not required if the hole is within the tolerance required for fasteners as given in the fastener table.
(b) Make sure the final insurance cut is within the tolerance required for fasteners as given in the fastener code table.
(c) Refer to 737-600 SRM 51-20-01, 737-700 SRM 51-20-01, 737-700CONV SRM 51-20-01, 737-700IGW (BBJ) SRM 51-20-01, 737-800 SRM 51-20-01 as accepted procedures.
(d)
For fastener installation. Refer to 737-600 SRM 51-40-02,737-700 SRM 51-40-02,737-700CONV 
SRM 51-40-02,737-700IGW (BBJ) SRM 51-40-02,737-800 SRM 51-40-02 as an accepted 
procedures except overdrive all rivets to a minimum bucked tail diameter of 1.4d.
(e) as given in fastener code table.
COUNTERSINK FASTENER
C
D
EXAMPLE OF FASTENER SYMBOL
LENGTH/GRIP
FASTENER
6F
7
LETTER CODE
DIAMETER
(OPTIONAL) 
HEAD LOCATION
N = NEAR SIDE
F = FAR SIDE
(OPTIONAL)
(OPTIONAL)
S36173
(SHEET 2 OF 3)

### Page 34

FIGURE 4: WING CENTER SECTION - UPPER AND LOWER STRINGERS - DRILL START FASTENER 
INSTALLATION
April 23, 2007
737-57A1294
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 34 of 34
BOEING SERVICE BULLETIN 737-57A1294
ALERT                                                                                                    ALERT
 
 
If the grip length shown is not available at Boeing, fasteners supplied in kits may be one grip length longer than 
indicated. Also, if any of the fastener part numbers are not available or have been superseded, substitute 
fasteners may be supplied in Boeing kits, Boeing Document D-590 and Boeing drawing 65-88700 are used to 
determine the part numbers used as substitutes. 
CODE NAME IDENTIFICATION QTY HOLE DIA MORE DATA
A Rivet, modified 
universal head.
BACR15FT5AD( )C OR BACR15FT5D( )C - 0.159 - 0.171 (a)(b)(c)
BACR15FT6AD( )C OR BACR15FT6D( )C - 0.191 - 0.202 (a)(b)(c)
BACR15FT7AD( )C OR BACR15FT7D( )C - 0.221 - 0.223 (a)(b)(c)
BACR15FT8AD( )C OR BACR15FT8D( )C - 0.254 - 0.265 (a)(b)(c)
(a) Determine the length of rivet at installation.
(b) For fastener installation. Refer to 737-600 SRM 51-40-02,737-700 SRM 51-40-02,737-700CONV 
SRM 51-40-02,737-700IGW (BBJ) SRM 51-40-02,737-800 SRM 51-40-02 as an accepted procedures 
except overdrive all rivets to a minimum bucked tail diameter of 1.4d.
(c) For hole diameter sizes. Refer to 737-600 SRM 51-40-05, 737-700 SRM 51-40-05, 737-700CONV 
SRM 51-40-05, 737-700IGW (BBJ) SRM 51-40-05, 737-800 SRM 51-40-05 as accepted procedures.
(SHEET 3 OF 3)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
