# Boeing Alert Service Bulletin 737-57A1319: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0673; AD 2012-13-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 737-57A1319](https://openairdocs.org/service-documents/boeing/737-57a1319.md)
- Title as filed: U.S. DOT/FAA - SB-737-57A1319-00--[1]
- Pages: 36
- PDF: https://openairdocs.org/files/sha256/d8/17/d817642c17f84f45cd194a398c761f294fe3b031ef7eeae5992d7862a2f1d117
- Page: https://openairdocs.org/service-documents/boeing/737-57a1319/file/d817642c17f8

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-57A1319
Original Issue: April 16, 2012
ATA System: 5752
SUBJECT: WINGS - Trailing Edge Flaps - Outboard Flap, Carriage Spindle - Inspection for
Corrosion
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2012 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner™,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and Boeing
liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection
with this document unless provided in writing by Boeing. BOEING is a trademark of Boeing Management
Company.
Original Issue: April 16, 2012
737-57A1319
1 of 36
6.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
2 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A. Effectivity ................................................ 9
1. Airplanes ............................................. 9
2. Spares Affected ........................................ 2 0
B. Concurrent Requirements ...................................... 2 0
C. Reason ................................................ 2 1
D. Description .............................................. 2 1
E. Compliance .............................................. 2 2
F. Approval ............................................... 2 3
G. Manpower .............................................. 2 3
H. Weight and Balance Changes .................................... 2 4
I. Electrical Load Data ......................................... 2 4
J. References .............................................. 2 4
1. Existing Data: ......................................... 2 4
2. Data Supplied with this Service Bulletin: ........................... 2 4
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 2 4
K. Publications Affected ........................................ 2 5
L. Interchangeability and Intermixability of Parts ........................... 2 5
M. Software Accomplishment Summary ................................ 2 5
2. MATERIAL INFORMATION ........................................ 2 7
A. Material - Price and Availability ................................... 2 7
B. Industry Support Information .................................... 2 7
C. Parts Necessary for Each Airplane ................................. 2 7
1. Kits/Parts ............................................ 2 7
2. Parts and Materials Supplied by the Operator ........................ 2 7
3. Parts Modified and Reidentified ................................ 2 7
4. Parts Removed and Not Replaced .............................. 2 7
D. Parts Necessary to Change Spares ................................. 2 7
E. Special Tooling - Price and Availability ............................... 2 7
F. Special Tooling Necessary to do this Service Bulletin ....................... 2 7
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 9
A. GENERAL INFORMATION ..................................... 2 9
B. WORK INSTRUCTIONS ....................................... 3 0
FIGURE 1: LOCATE SUB-ASSEMBLY PART NUMBER FOR CARRIAGES AT WBL 254 AND WBL 355
WITH HVOF THERMAL COATED SPINDLES ........................ 3 3
FIGURE 2: INSPECT SUSPECT CARRIAGE SPINDLES FOR CORROSION ............. 3 5
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
3 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
4 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
737
Service Bulletin
ALERT
SummaryNumber: 737-57A1319Original Issue: April 16, 2012
ATA System: 5752
SUBJECT: WINGS - Trailing Edge Flaps - Outboard Flap, Carriage Spindle - Inspection for
Corrosion
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Boeing has recently received reports of corrosion on outboard flap carriages from four operators, on carriage
spindles with less than 7,000 flight cycles. Each of these reports was on carriages with
Tungsten-Carbide-Cobalt-Chrome coating applied with High Velocity Oxygenated Fuel (HVOF) on the spindle
portion. None were reported to have any fractures. The coating had flaked off the lower surface of the spindle,
at the root. A crack in the coating can lead to moisture ingress which may begin corroding the alloy steel base
metal. If left unchecked, corrosion pits in this area may create a stress concentration where a crack can start in
the base metal resulting in the inability of the carriage to sustain limit load. One fractured carriage spindle can
be compensated for by the pilot with inputs to the aileron and or rudder. However fractures of both the inboard
and the outboard carriage spindles at the forward end of the spindle through the large diameter (the critical
section), on a given outboard flap may preclude continued safe flight and landing of the airplane.
This service bulletin provides instruction to inspect 737-100/-200/-200C/-300/400/500 carriage spindles with
High Velocity Oxy-Fuel (HVOF) thermal coating that are installed at WBL 254 and WBL 355 on the outboard
trailing edge flaps for corrosion and missing or flaked coating.
Boeing Service Related Problem (SRP) 737-SRP-57-0254 is related to this service bulletin.
ACTION
Review your records or do an inspection for the carriage part number to determine if you have any of the suspect
carriage sub-assemblies that have Tungsten-Carbide-Cobalt-Chrome coating applied with High Velocity
Oxygenated Fuel (HVOF) thermal coating on the spindle. If you determine that you do have suspect carriages
with the HVOF thermal coating on the spindle, inspect for missing or flaked coating and/or base metal corrosion
and presence of Corrosion Inhibiting Compound (CIC). Do a detailed inspection or a Borescope inspection on
the forward end of the spindle, that is forward of the flap front spar. Inspect the HVOF thermal coated spindles
in accordance with Paragraph 1.E., Compliance. Remove and replace the corroded carriages with a new or
serviceable carriage.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
5 of 36

### Page 6

The replacement of a carriage that has the suspect HVOF thermal coating on the spindle with one that does
not have this HVOF coating, will terminate the inspection in this service bulletin for that carriage only. As an
option, the suspect carriage may be reworked into a non-suspect condition. Contact Boeing for additional
information. If you determine that your airplane does not have any carriage with the HVOF thermal coating, then
there is no further action required.
EFFECTIVITY
737-100, -200, -200C, -300, -400, -500 Airplanes. Refer to Paragraph 1.A.1., Airplanes for the list of affected
airplanes.
COMPLIANCE
Refer to Paragraph 1.E., Compliance.
The Federal Aviation Administration (FAA) will possibly release another Airworthiness Directive related to this
service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection, and/or repair procedures given in this service
bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
6 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 7 (OCR)

BOEING SERVICE BULLETIN 737-57A1319
ALERT  ALERT
ACCESS PANE  SPINDLE  BEARING  BEARING
SUPPORT
TRAILING
EDGE FLAP I  • DO A DETAILED
INSPECTION FOR BASE
CARRIAGE  METAL CORROSION IN
SUB-ASSEMBLY  THE INDICATED AREA OF
PART NUMBER AND  THE CARRIAGE SPINDLES
SERIAL NUMBER ON  WITH HVOF THERMAL
OLDER CARRIAGES  COATING.
OUTBOARD
MIDFLAP
CARRIAGE
AS AN OPTION USE A
BORESCOPE TO INSPECT IN
THE INDICATED AREA OF THE
FORWARD SECTION OF THE
SPINDLE
CARRIAGE SUB-ASSEMBLY
PART NUMBER AND SERIAL
NUMBER LOCATION
INSPECTION•
AREA
00
2136998
Original Issue: April 16, 2012
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  7 of 36

### Page 8

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
8 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-57A1319
Original Issue: April 16, 2012
ATA System: 5752
SUBJECT: WINGS - Trailing Edge Flaps - Outboard Flap, Carriage Spindle - Inspection for
Corrosion
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
DESCRIPTIONCONFIGURATIONGROUP
737-100, -200, -200C, -300, -400, -500 airplanes.-1
Airplane Models:
737-100, 737-200, 737-200C, 737-300, 737-400, 737-500
GroupVariable Number
1PA001 - PA022
1PA099
1PA231 - PA232
1PC001 - PC005
1PG001 - PG075
1PG199
1PG201 - PG230
1PG251 - PG255
1PG271 - PG279
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
9 of 36

### Page 10

GroupVariable Number
1PG301 - PG314
1PG331 - PG332
1PG351 - PG356
1PG375
1PG401 - PG403
1PG431 - PG442
1PG471 - PG475
1PG501 - PG505
1PG571 - PG586
1PG621 - PG630
1PG651 - PG652
1PG701 - PG705
1PH001
1PH011 - PH013
1PH021 - PH024
1PH701 - PH715
1PH731 - PH732
1PH741 - PH743
1PJ001 - PJ009
1PJ031 - PJ032
1PJ071 - PJ072
1PJ101 - PJ119
1PJ201 - PJ219
1PJ301 - PJ302
1PJ551 - PJ561
1PJ601 - PJ615
1PJ811
1PJ816 - PJ817
1PK026 - PK029
1PK041 - PK053
1PK061 - PK070
1PK081 - PK082
1PK091 - PK099
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
10 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 11

GroupVariable Number
1PK101 - PK103
1PK111 - PK120
1PK141 - PK146
1PK201 - PK204
1PK211 - PK223
1PK231 - PK241
1PK251 - PK258
1PK271 - PK274
1PK281 - PK289
1PK291
1PK301 - PK318
1PK341
1PK351 - PK361
1PK391
1PK431 - PK433
1PK451 - PK452
1PK461 - PK469
1PK495
1PK501 - PK504
1PK511 - PK515
1PK519
1PK521 - PK528
1PK541 - PK565
1PK581
1PK591 - PK599
1PK601 - PK617
1PK621 - PK637
1PK641 - PK642
1PK661 - PK666
1PK671 - PK681
1PK691 - PK697
1PK711 - PK716
1PK731 - PK765
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
11 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 12

GroupVariable Number
1PK771 - PK779
1PK801 - PK804
1PK819 - PK827
1PK830
1PK861 - PK863
1PK871 - PK874
1PK881 - PK884
1PK901 - PK938
1PK971 - PK974
1PL001 - PL028
1PL061
1PL081
1PL101 - PL113
1PL151
1PL171 - PL172
1PL201 - PL203
1PL221
1PL401 - PL417
1PL421
1PL441
1PL451 - PL456
1PL471
1PL491
1PL501 - PL506
1PL551 - PL562
1PL581
1PL601 - PL603
1PL611
1PL621 - PL626
1PL631 - PL632
1PL711 - PL712
1PL716 - PL747
1PL756
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
12 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 13

GroupVariable Number
1PL758
1PL761 - PL770
1PL781 - PL788
1PL793
1PL801 - PL803
1PM001 - PM006
1PM016 - PM017
1PM021 - PM023
1PM051 - PM066
1PM101 - PM119
1PM141 - PM142
1PM171
1PM181
1PM251 - PM255
1PM281 - PM283
1PM381 - PM399
1PM401 - PM417
1PM541 - PM564
1PN001 - PN002
1PN021 - PN043
1PN081 - PN086
1PN101 - PN117
1PN131 - PN163
1PN401 - PN420
1PN431 - PN433
1PN451 - PN456
1PN471 - PN474
1PN481
1PN491 - PN493
1PN501 - PN502
1PN511 - PN512
1PN521
1PP001 - PP054
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
13 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 14

GroupVariable Number
1PP101 - PP169
1PP181 - PP199
1PP201 - PP205
1PP221
1PP231 - PP243
1PP281 - PP286
1PP301 - PP305
1PP351 - PP353
1PP376 - PP384
1PP391 - PP393
1PP401 - PP440
1PP471 - PP475
1PP501 - PP522
1PP631 - PP634
1PP651 - PP652
1PP671 - PP699
1PP701 - PP733
1PP771 - PP779
1PP801 - PP808
1PP821 - PP827
1PP831 - PP848
1PP851 - PP852
1PP861 - PP877
1PP891 - PP899
1PP901 - PP936
1PP946 - PP948
1PP951 - PP952
1PP961 - PP967
1PP981 - PP991
1PP993
1PQ001 - PQ016
1PQ026 - PQ041
1PQ051 - PQ092
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
14 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 15

GroupVariable Number
1PQ101 - PQ199
1PQ201 - PQ202
1PQ221 - PQ237
1PQ241 - PQ243
1PQ251 - PQ267
1PQ281 - PQ299
1PQ301 - PQ307
1PQ331 - PQ332
1PQ341 - PQ348
1PQ361 - PQ373
1PQ391 - PQ395
1PQ401 - PQ418
1PQ421
1PQ431 - PQ438
1PQ447 - PQ448
1PQ451
1PQ454
1PQ471 - PQ475
1PQ479 - PQ481
1PQ486 - PQ487
1PQ491 - PQ493
1PQ771 - PQ772
1PQ791 - PQ793
1PQ801 - PQ805
1PQ931 - PQ935
1PQ951
1PQ971 - PQ997
1PR001 - PR017
1PR021 - PR034
1PR041 - PR045
1PR061 - PR072
1PR077 - PR082
1PR091 - PR092
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
15 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 16

GroupVariable Number
1PR096
1PR101
1PR121 - PR122
1PR131 - PR132
1PR141 - PR143
1PR161 - PR172
1PR181
1PS601 - PS631
1PS636 - PS638
1PS641 - PS644
1PS651 - PS657
1PS666 - PS669
1PS691 - PS692
1PS701 - PS706
1PS751 - PS799
1PS811
1PS836 - PS837
1PS841 - PS846
1PS851 - PS852
1PS856
1PS861 - PS863
1PS866 - PS868
1PS871 - PS874
1PS896 - PS897
1PS901 - PS941
1PS956 - PS957
1PS961 - PS963
1PS971 - PS978
1PT001 - PT015
1PT021 - PT031
1PT041 - PT064
1PT101 - PT105
1PT121 - PT138
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
16 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 17

GroupVariable Number
1PT146 - PT148
1PT161 - PT170
1PT181 - PT188
1PT211 - PT220
1PT295
1PT301 - PT309
1PT331 - PT360
1PT381 - PT399
1PT401 - PT438
1PT501 - PT517
1PT561 - PT565
1PT581 - PT586
1PT611 - PT621
1PT641 - PT644
1PT651 - PT656
1PT671 - PT672
1PT681 - PT685
1PT701 - PT703
1PT716 - PT717
1PT721 - PT725
1PT801 - PT834
1PT851 - PT854
1PT871 - PT886
1PT901 - PT930
1PT971 - PT973
1PT981 - PT985
1PT996
1PU001 - PU025
1PU301
1PU311 - PU313
1PV001 - PV055
1PV201 - PV209
1PV226 - PV229
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
17 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 18

GroupVariable Number
1PV231 - PV237
1PV271 - PV272
1PV281 - PV287
1PV296
1PV301 - PV302
1PV351
1PV356 - PV357
1PW001 - PW054
1PW061 - PW068
1PW072
1PW086 - PW088
1PW091 - PW094
1PW101 - PW102
1PW106
1PW111 - PW120
1PW156 - PW157
1PW161 - PW171
1PW201 - PW252
1PW261 - PW268
1PW271 - PW276
1PW278
1PW281 - PW293
1PW296
1PW301 - PW327
1PW401 - PW408
1PW411 - PW418
1PW421 - PW424
1PW431 - PW435
1PW441 - PW450
1PW461 - PW467
1PW501 - PW504
1PW511 - PW522
1PW524 - PW550
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
18 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 19

GroupVariable Number
1PW556 - PW557
1PW561 - PW564
1PW571 - PW576
1PW591 - PW596
1PW611 - PW622
1PW631 - PW637
1PW661 - PW662
1PW681 - PW683
1PW701 - PW702
1PW711 - PW717
1PW741 - PW742
1PW761
1PW771
1PW831
1PW851 - PW856
1PX071
1PX701
1PY001 - PY008
1PY021 - PY022
1PY031
1PY036 - PY037
1PY046 - PY048
1PY051 - PY053
1PY056 - PY057
1PY101 - PY103
1PY111 - PY113
1PY131 - PY135
1PY141 - PY143
1PY151 - PY154
1PY156 - PY157
1PY161 - PY162
1PY166
1PY191
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
19 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 20

GroupVariable Number
1PY201
1PY221 - PY222
1PY231
1PY241 - PY244
1PY270 - PY275
1PY281
1PY286
1PY301 - PY304
1PY321 - PY323
1PY341 - PY346
1PY361 - PY362
1PY381
1PY401
1PY409 - PY411
1PY421 - PY422
1PY441
1PY451
1PY461 - PY463
1PY591 - PY595
1PY611 - PY612
1PY621
1PY631
1PY651
1PY671 - PY672
1PY721
1PY741
2. Spares Affected
Examine your spares supply for the parts or components identified in this service bulletin. If any
parts or components are found, refer to Paragraph 3.B. Work Instruction for the required action
B. Concurrent Requirements
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
20 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 21

C. Reason
Boeing has recently received reports of corrosion on outboard flap carriages from four operators, on
carriage spindles with less than 7,000 flight cycles. Each of these reports was on carriages with
Tungsten-Carbide-Cobalt-Chrome coating applied with High Velocity Oxygenated Fuel (HVOF) on the
spindle portion. None were reported to have any fractures. The coating had flaked off the lower surface
of the spindle, at the root. A crack in the coating can lead to moisture ingress which may begin corroding
the alloy steel base metal. If left unchecked, corrosion pits in this area may create a stress concentration
where a crack can start in the base metal resulting in the inability of the carriage to sustain limit load.
One fractured carriage spindle can be compensated for by the pilot with inputs to the aileron and or
rudder. However fractures of both the inboard and the outboard carriage spindles at the forward end
of the spindle through the large diameter (the critical section), on a given outboard flap may preclude
continued safe flight and landing of the airplane
This service bulletin provides instruction to inspect 737-100/-200/-200C/-300/400/500 carriage spindles
with High Velocity Oxy-Fuel (HVOF) thermal coating that are installed at WBL 254 and WBL 355 on
the outboard trailing edge flaps for corrosion and missing or flaked coating.
Boeing Service Related Problem (SRP) 737-SRP-57-0254 is related to this service bulletin.
D. Description
Review your records or do an inspection for the carriage part number to determine if you have any of
the suspect carriage sub-assemblies that have Tungsten-Carbide-Cobalt-Chrome coating applied with
High Velocity Oxygenated Fuel (HVOF) thermal coating on the spindle. If you determine that you do
have suspect carriages with the HVOF thermal coating on the spindle, inspect for missing or flaked
coating and/or base metal corrosion and presence of Corrosion Inhibiting Compound (CIC). Do a
detailed inspection or a Borescope inspection on the forward end of the spindle, that is forward of the
flap front spar. Inspect the HVOF thermal coated spindles in accordance with Paragraph 1.E.,
Compliance. Remove and replace the corroded carriages with a new or serviceable carriage.
The replacement of a carriage that has the suspect HVOF thermal coating on the spindle with one that
does not have this HVOF coating, will terminate the inspection in this service bulletin for that carriage
only. As an option, the suspect carriage may be reworked into a non-suspect condition. Contact Boeing
for additional information. If you determine that your airplane does not have any carriage with the HVOF
thermal coating, then there is no further action required.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
3-7, 4-7737-100, 737-200, 737-200C
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
21 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 22

Group 1:
Affected Maintenance Zones
ZoneModel
307, 407737-300, 737-400, 737-500
E. Compliance
The Federal Aviation Administration (FAA) will possibly release another Airworthiness Directive related
to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in
this service bulletin mandatory.
Table 1: Inspect HVOF thermal coated Outboard Flap, Carriage Spindles at WBL 254 and WBL
355 for missing or Flaked coating and Corrosion.
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 90 days af-
ter the original is-
sue date of this
service bulletin
Determine if you have
any suspect carriage in-
stalled in accordance with
Work Instruction, Para-
graph 3.B. Step 1.
All airplanes
180 days (a)Within 90 days af-
ter the original is-
sue date of this
service bulletin or
180 days from the
installation of a
suspect carriage,
whichever occurs
later. (a)
Inspect the lower surface
of the forward end of the
spindle at the root, in ac-
cordance with Work In-
struction, Paragraph 3.B.
Step 6.
All airplanes with suspect
carriage part numbers
65C27409-29 or
65C27409-31 or 65-47821-
30 or unidentifiable part
numbers.
(a)Before further
flight.
Replace the carriage with
a serviceable carriage, in
accordance with Work In-
struction, Paragraph 3.B.
Step 6.b.
Missing or flaked coating
or base metal corrosion is
found.
-Before further
flight.
Inspect the lower surface
of the forward end of the
spindle at the root for CIC
coverage in accordance
with Work Instruction,
Paragraph 3.B. Step 6.a.
No missing or flaked coat-
ing or base metal corrosion
is found.
-Before further
flight.
Apply CIC as necessary,
in accordance with Work
Instruction, Paragraph
3.B. Step 6.a.
CIC does not cover the in-
spection area.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
22 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 23

Table 1: Inspect HVOF thermal coated Outboard Flap, Carriage Spindles at WBL 254 and WBL
355 for missing or Flaked coating and Corrosion.
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
(a) Replacing a suspect carriage with a new or serviceable non-suspect carriage, in accordance
with Work Instruction, Paragraph 3.B. Step 7, terminates the inspections in this service bulletin
for that carriage only.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
This estimate does not include the task hour data given in the service bulletins in Paragraph 1.B.,
Concurrent Requirements.
The table below shows an estimate of the task hours necessary to do this service bulletin for each
carriage spindle. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate
with operator task hour data if necessary. The estimate does not include lost time. These are some
examples of lost time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Elapsed HoursTask HoursNumber of Per-
sons
Task
0.600.601Open Access
0.800.801Inspect
4.2517.004Replace
0.600.601Close Access
0.751.502Test
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
23 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 24

Elapsed HoursTask HoursNumber of Per-
sons
Task
7.0020.50TOTAL FOR EACH AIRPLANE CAR-
RIAGE SPINDLE
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not applicable.
J. References
1. Existing Data:
a. Service Related Problem (SRP) 737-SRP-57-0254
b. Boeing Parts Standards Document D-590
c. Boeing Drawing 65-88700
d. 737-300/400/500 Aircraft Maintenance Manual (AMM) 27-51-00, 27-51-34, 27-51-44
e. 737-100/200/200C Aircraft Maintenance Manual (AMM) 737-100/200 AMM 27-51-00,
737-100/200 AMM 27-51-72, 737-100/200 AMM 27-51-81
f. Standard Overhaul Practices Manual (SOPM) SOPM 20-50-10, SOPM 20-41-05
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
Trailing Edge Flap Installation and Rigging Procedures65C16930
Carriage Sub Assy - Outboard Flap65C27409
Carriage Assy, Outboard Flap, Wing65-46481
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
24 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 25

K. Publications Affected
Chapter-SectionPublication
27-51737 Illustrated Parts Catalog
57-53Component Maintenance Manual
27-51737 Aircraft Maintenance Manual
DAMAGE TOLERANCE BASED STRUCTURAL INSPECTIONS:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue Critical
Structure (FCS) and for changes to Damage Tolerance Inspections(DTI) required in the Maintenance
Program. No new Damage Tolerance Inspections (DTIs) are required by this Service Bulletin.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
25 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 26

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
26 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT
BLANK PAGE

### Page 27

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the inspection, and/or repair procedures given in this
service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
None.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
If you have outboard flap, carriage spindles 65C27409-29 / -31 or 65-47821-30 with the High Velocity
Oxygenated Fuel (HVOF) coating, refer to Paragraph 3.B., Work Instructions for the required action.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
27 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 28

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
28 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT
BLANK PAGE

### Page 29

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets are given in 737 SRM, Chapter 51
– Torque limits to tighten nuts and bolts are given in 737 SRM, Chapter 51
4. For approved fastener and process material substitutions, refer to 737 SRM, Chapter
51. Alternate fasteners are given in 737 SRM Chapter 51
5. If the length of any fastener specified in this service bulletin does not meet the
installation standards given in SRM Chapter 51, then a fastener of the same
specification, or an approved substitute, with a length which meets the installation
standards given in SRM Chapter 51 may be used.
6. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
7. Boeing Service Letter 737-SL-51-042, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
8. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
9. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
29 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 30

10. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
11. This service bulletin includes functional test procedures for the systems changed by
this service bulletin. More functional tests can possibly be necessary in accordance
with standard maintenance practices because of interruption to other airplane systems.
12. Some Boeing parts are supplied in a temporary configuration. Those parts are
identified with a 'U', 'W', or 'Y' in place of the '-' (dash) in the part number. It is
permitted to install parts identified with a 'U', 'W', or 'Y' as an alternative to the '-'(dash)
part number. Boeing Drawing 005W0900 contains more data.
13. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
B. WORK INSTRUCTIONS
1. Use one of the two following methods to determine if you have any suspect carriages, i.e., carriages
with the High Velocity Oxygen Fuel (HVOF) coating, installed at WBL 254 or WBL 355. If you do
not have a carriage with HVOF coating, then there is no further action required. All 737-300, -400,
-500 carriage sub-assemblies have the base part number 65C27409-( ). The two suspect part
numbers are 65C27409-29 and 65C27409-31. All 737-100,-200, -200C carriage sub-assemblies
have the base part number 65-47821-( ). The 737-100, -200, -200C carriage sub-assembly suspect
part number is 65-47821-30. If you are unable to identify the sub-assembly part number in the
form of 65C27409-( ) or 65-47821-( ), you must assume you have a suspect carriage.
a. You may use your records, if your record review positively identifies the carriage sub-assembly
part number. If your records indicate a sub-assembly 65C27409 with a dash number other
than -29, and -31 for 737-300, -400, -500 or 65-47821-30 for 737-100, -200, -200C, then there
is no further action required.
If your records indicate that you have a sub-assembly part number 65C27409-29 or
65C27409-31 for 737-300, -400, -500 or 65-47821-30 for 737-100, -200, -200C, you have a
suspect carriage sub-assembly.
b. You can identify the carriage by the sub-assembly part number on the part. Gain access as
required to the carriages on the outboard flap at WBL 254 and WBL 355. Removal of the flap
fairing may be required to read the part mark information on the bottom side of the carriage.
Refer to FIGURE 1 for the location of the Boeing sub-assembly part number.
NOTE: Care must be taken, as an older assembly number does not preclude a newer
sub-assembly carriage with the HVOF coated spindle.
2. Gain access as required to the carriages on the outboard flap at WBL 254 and WBL 355.
3. Supply power to the hydraulic system. Refer to 737-100/200 AMM 27-51-00 and 737-300/400/500
AMM 27-51-00 as an accepted procedure.
4. Extend the flaps to 40 detent or as required, to expose the spindle area of the carriage.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
30 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 31

NOTE: For additional access you may manually deploy the flaps beyond the Flap 40 position,
down to the screwjack stops, by winding the torque tubes in the main wheel well.
5. Remove power from the hydraulic system. Refer to 737-100/200 AMM 27-51-00 and
737-300/400/500 AMM 27-51-00 as an accepted procedure.
6. For any suspect carriage, gain access through the front of the trailing edge flap for a detailed
inspection or an optional Borescope inspection of the carriage spindle forward section. Perform
the detailed inspection or the Borescope inspections of the indicated sections of the spindle, looking
for missing or flaked coating or base metal corrosion in accordance with FIGURE 2.
As an option, replacing a suspect carriage with a new or serviceable non-suspect carriage, in
accordance with Work Instruction, Paragraph 3.B Step 7, terminates the inspections in this service
bulletin for that carriage only.
a. If no indication of missing or flaked coating or base metal corrosion is found, the carriage does
not need to be disassembled or removed. Perform a detailed inspection for Corrosion Inhibiting
Compound (CIC) coverage in accordance with FIGURE 2. If CIC does not cover the inspection
area, apply BMS3-27 or BMS3-25 CIC to the indicated section, in accordance with FIGURE
2. Refer to SOPM 20-41-05 as an accepted procedure.
b. If missing or flaked coating or base metal corrosion is found, replace the carriage with a new
or serviceable carriage, in accordance with Step 7.
NOTE: For purposes of this service bulletin, a "serviceable" part can be either a "suspect"
part, i.e., a carriage with HVOF coating, or a "non-suspect" part, i.e., a carriage that
does not have HVOF coating. Boeing is currently developing service instructions to
rework suspect carriages into non-suspect carriages. Contact Boeing for further
information.
7. Use the following steps to remove or replace any carriage.
NOTE: Replacing a suspect carriage, with one that is not coated with HVOF will terminate the
inspections for that location.
a. Remove the outboard trailing edge flap. Refer to 737-100/200 AMM 27-51-72 or
737-300/400/500 AMM 27-51-34 as an accepted procedure.
b. Remove the midflap carriage from the outboard midflap. Refer to 737-100/200 AMM 27-51-81
or 737-300/400/500 AMM 27-51-44 as an accepted procedure.
c. Install the midflap carriage in the outboard midflap. Refer to 737-100/200 AMM 27-51-81 or
737-300/400/500 AMM 27-51-44 as an accepted procedure.
d. Install the outboard trailing edge flap. Refer to 737-100/200 AMM 27-51-72 or 737-300/400/500
AMM 27-51-34 as an accepted procedure.
8. Supply power to the hydraulic system. Refer to 737-100/200 AMM 27-51-00 or 737-300/400/500
AMM 27-51-00 as an accepted procedure
9. Retract the flaps fully to 0 detent position.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
31 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 32

10. Remove power from the hydraulic system. Refer to 737-100/200 AMM 27-51-00 or 737-300/400/500
AMM 27-51-00 as an accepted procedure.
11. Put the airplane back to a serviceable condition
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
32 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 33 (OCR)

BOEING SERVICE BULLETIN 737-57A1319
ALERT  ALERT
ACCESS PANEL  SPINDLE
BEARING  BEARING
SUPPORT
TRAILING
EDGE FLAP
OUTBOARD
MIDFLAP
CARRIAGE
CARRIAGE
SPINDLE
) SUB-ASSEMBLY
PART NUMBER AND
SERIAL NUMBER ON
uu  OLDER CARRIAGES
SUB-ASSEMBLY
PART NUMBER AND
SERIAL NUMBER
A-A  2136999
FIGURE 1: LOCATE SUB-ASSEMBLY PART NUMBER FOR CARRIAGES AT WBL 254 AND WBL 355 WITH
HVOF THERMAL COATED SPINDLES
(SHEET 1 OF 2)
Original Issue: April 16, 2012
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-57A1319
Work - See page 1 for details.  33 of 36

### Page 34

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b) (d)-65C27409-29Carriage Sub-assem-
bly part number
Identify1
-65C27409-31
65-47821-30
(b) (c) (d)-65C27409-( )Carriage Sub-assem-
bly part number
Identify2
65-47821-( )
(a) The carriage sub-assembly part number is etched at the bottom of the carriage.
(b) Care must be taken, as an older assembly number does not preclude a newer sub-assembly carriage with
the HVOF coated spindle
(c) This is the location of the part number on older carriage sub-assemblies.
Removal of the flap may be required to access this area.
(d) Accomplishment of step 2 is only required if no sub-assembly base part number is found in step 1.
FIGURE 1: LOCATE SUB-ASSEMBLY PART NUMBER FOR CARRIAGES AT WBL 254 AND WBL 355 WITH
HVOF THERMAL COATED SPINDLES
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
34 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

### Page 35 (OCR)

BOEING SERVICE BULLETIN 737-57A1319
ALERT  ALERT
ACCESS PANEL
TRAILING
EDGE FLAP
OUTBOARD
MIDFLAP
CARRIAGE
TRAILING
EDGE FLAP
OUTBOARD MIDFLAP
CARRIAGE
SPINDLE
BEARING
U2 ASPECTION AND CIC  APPLICATION AREA
A-A  INSPECTION AND CIC 1  APPLICATION AREA
< FWD
2137851
FIGURE 2: INSPECT SUSPECT CARRIAGE SPINDLES FOR CORROSION
(SHEET 1 OF 2)
Original Issue: April 16, 2012
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  35 of 36

### Page 36

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Do a detailed inspection of
the forward end of the
spindle at the root for miss-
ing or flaked coating or
base metal corrosion. (a)
--Suspect Carriage
Spindle
Inspect1
Do a detailed inspect of the
lower surface of the spindle
portion of the root for CIC
coverage. If CIC does not
cover the inspection area,
apply or reapply CIC as
necessary. Refer to SOPM
20-41-05 as an accepted
procedure. Overspray of
CIC beyond the indicated
oval area is acceptable. (b)
(c)
--Suspect Carriage
Spindle
Inspect2
(a) As an option, use a zero degree Borescope and inspect the forward end of the spindle through the front of
the trailing edge flap for corrosion.
(b) If CIC is intact, no reapplication is necessary.
(c) It is not required to inspect for CIC coverage if missing or flaked coating or base metal corrosion was found.
FIGURE 2: INSPECT SUSPECT CARRIAGE SPINDLES FOR CORROSION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 16, 2012
737-57A1319
36 of 36
BOEING SERVICE BULLETIN 737-57A1319
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
