# Boeing Alert Service Bulletin 737-57A1333: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2017-0773; AD 2017-23-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 737-57A1333](https://openairdocs.org/service-documents/boeing/737-57a1333.md)
- Title as filed: SB-737-57A1333-00--
- Pages: 40
- PDF: https://openairdocs.org/files/sha256/51/cb/51cb9dc64a26b7e3017e3fc16b54dc257f9a11066b3707d2d4e3ee5d1c89bf61
- Page: https://openairdocs.org/service-documents/boeing/737-57a1333/file/51cb9dc64a26

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-57A1333
Original Issue: May 12, 2017
ATA System: 5730
SUBJECT: WINGS - Plates/Skin - Lower Chord of Rear Spar and Lower Aft Skin at Wing Buttock
Line 157 - Inspection
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2017 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: May 12, 2017
737-57A1333
1 of 40
4.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
2 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 26
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 27
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 27
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
FIGURE 1: LEFT WING LOWER AFT SKIN AND LOWER CHORD - WBL 157 - INSPECTION [Group 2]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
FIGURE 2: RIGHT WING LOWER AFT SKIN AND LOWER CHORD - WBL 157 - INSPECTION [Group 2]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 1: LOW FREQUENCY EDDY
CURRENT (LFEC) INSPECTION OF THE LOWER CHORD OF THE REAR SPAR AND
DETAILED INSPECTION OF THE LOWER AFT SKIN ON THE LEFT AND RIGHT WING AT
WBL 157 [Group 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
3 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
4 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
737
Service Bulletin
ALERT
SummaryNumber: 737-57A1333Original Issue: May 12, 2017
ATA System: 5730
SUBJECT: WINGS - Plates/Skin - Lower Chord of Rear Spar and Lower Aft Skin at Wing Buttock
Line 157 - Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Accomplishment of this service bulletin will make sure that any crack in the lower aft skin and the lower chord
of the rear spar at Wing Buttock Line (WBL) 157 is found. If this service bulletin is not done, undetected cracks
can lead to the inability of the lower chord of the rear spar, a principal structural element, to sustain limit load
which could adversely affect the structural integrity of the airplane.
During a Non-Destructive Test (NDT) open hole inspection, a 737-300 operator found a crack indication in the
horizontal flange of the lower chord at WBL157 at 53,481 flight cycles and 66,268 flight hours. The crack was
found while accomplishing a splice repair on a new section of web at the left wing rear spar. Boeing has received
multiple reports of similar crack findings on airplanes between 63,550 and 69,285 total flight cycles.
Analysis has shown that Main Landing Gear (MLG) loading and braking loads result in cyclic fatigue and local
stresses on the structure. Concentrated loading due to the back to back design of the MLG fitting also contributes
to the problem.
This service bulletin provides instructions for inspection of the lower aft skin and the lower chord of the rear spar
for any crack at WBL 157 to make sure they are found and repaired.
Boeing Service Related Problem (SRP) 737-SRP-57-0306 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 737 FTD 57-16004 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
5 of 40

### Page 6

ReferenceAffectedPlanning Data
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedNoPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
NoOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION
Group 1:
Boeing endorses the FAA rules related to Limit of Validity (LOV) and recommends immediate and permanent
removal from service of any airplanes upon reaching the LOV, whether or not it is operated under FAA jurisdiction.
As such, Boeing no longer provides maintenance instructions for airplanes that have accumulated flight cycles
beyond the LOV. 737 Classic airplanes line numbers 1-291 have accumulated flight cycles beyond the LOV of
the maintenance program. 14 CFR 121.1115 and 129.115 prohibit operation of an airplane beyond its LOV.
Group 2:
Do the work that follows on the left and right wing at Wing Buttock Line (WBL) 157:
1. In inspection areas with no existing external repair:
a. Deactivate the trailing edge flaps.
b. Do a Low Frequency Eddy Current (LFEC) inspection of the lower chord of the rear spar for any
crack and a detailed inspection of the lower aft skin for any crack. If any crack is found, contact
The Boeing Company for repair instructions and do the repair. If no crack is found repeat the
inspections.
c. Activate the trailing edge flaps.
2. In inspection areas with an existing external repair, contact The Boeing Company for instructions and
do the instruction.
EFFECTIVITY
All 737-100/-200/-200C/-300/-400/-500 Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected
airplane(s).
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
6 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 7

COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
7 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 8 (OCR)

BOEING SERVICE BULLETIN 737-57A1333
ALERT  ALERT
RSS  TOO
224.14
UPPER
CHORD
MLG SUPPORT BEAM
MAIN LANDING GEAR
SUPPORT BEAM
WEB
MAIN LANDING
GEAR SUPPORT  LOWER
AFT FITTING  CHORD
LOWER AFT SKIN
WBL
157.00
IN INSPECTION AREAS WITH NO EXISTING EXTERNAL REPAIR, DO A LOW FREQUENCY
EDDY CURRENT INSPECTION OF THE LOWER CHORD OF THE REAR SPAR FOR
CRACKS AND DETAILED INSPECTION OF THE LOWER AFT SKIN FOR CRACKS. IF ANY
CRACK IS FOUND, CONTACT THE BOEING COMPANY FOR REPAIR INSTRUCTIONS AND
DO THE REPAIR. IF NO CRACK IS FOUND, REPEAT THE INSTRUCTIONS.
IN INSPECTION AREAS WITH AN EXISTING EXTERNAL REPAIR, CONTACT THE BOEING
COMPANY FOR INSTRUCTIONS AND DO THE INSTRUCTION.
MAIN LANDING GEAR  2550885
SUPPORT AFT FITTING
Original Issue: May 12, 2017
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-57A1333
Work - See page 1 for details.  8 of 40

### Page 9

Commercial 
Airplanes
737
Service Bulletin
ALERT
Number: 737-57A1333
Original Issue: May 12, 2017
ATA System: 5730
SUBJECT: WINGS - Plates/Skin - Lower Chord of Rear Spar and Lower Aft Skin at Wing Buttock
Line 157 - Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is applicable to all 737-100/200/200C/300/400/500 Airplanes in 2 Groups.
The Variable Numbers and Group Information for the applicable airplanes is given below.
Refer to Service Bulletin Index D6-19567 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP
737-100/200/200C airplanes, line numbers 1-291.-1
737-200/200C/300/400/500, line numbers 292-3132.-2
Airplane Models:
737-100, 737-200, 737-200C, 737-300, 737-400, 737-500
GroupVariable Number
1PA001 - PA022
1PA099
1PA231 - PA232
1PC001 - PC005
1PG001 - PG075
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
9 of 40

### Page 10

GroupVariable Number
1PG199
1PG201 - PG230
1PG251 - PG255
1PG271 - PG279
1PG301 - PG314
1PG331 - PG332
1PG351 - PG356
1PG375
1PG401 - PG403
1PG431 - PG442
1PG471 - PG475
1PG501 - PG505
1PG571 - PG583
2PG584 - PG586
1PG621 - PG630
1PG651 - PG652
1PG701 - PG705
2PH001
2PH011 - PH013
2PH021 - PH024
1PH701 - PH715
1PH731 - PH732
1PH741 - PH742
2PH743
1PJ001 - PJ002
2PJ003 - PJ009
1PJ031 - PJ032
1PJ071 - PJ072
1PJ101 - PJ104
2PJ105 - PJ119
2PJ201 - PJ219
2PJ301 - PJ302
2PJ551 - PJ561
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
10 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 11

GroupVariable Number
2PJ601 - PJ615
2PJ811
2PJ816 - PJ817
2PK026 - PK029
2PK041 - PK053
2PK061 - PK070
2PK081 - PK082
2PK091 - PK099
2PK101 - PK103
2PK111 - PK120
2PK141 - PK146
2PK201 - PK204
2PK211 - PK223
2PK231 - PK241
2PK251 - PK258
2PK271 - PK274
2PK281 - PK289
2PK291
2PK301 - PK318
2PK341
2PK351 - PK361
2PK391
2PK431 - PK433
2PK451 - PK452
2PK461 - PK469
2PK495
2PK501 - PK504
2PK511 - PK515
2PK519
2PK521 - PK528
2PK541 - PK565
2PK581
2PK591 - PK599
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
11 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 12

GroupVariable Number
2PK601 - PK617
2PK621 - PK637
2PK641 - PK642
2PK661 - PK666
2PK671 - PK681
2PK691 - PK697
2PK711 - PK716
2PK731 - PK765
2PK771 - PK779
2PK801 - PK804
2PK819 - PK827
2PK830
2PK861 - PK863
2PK871 - PK874
2PK881 - PK884
2PK901 - PK938
2PK971 - PK974
2PL001 - PL028
2PL061
2PL081
2PL101 - PL113
2PL151
2PL171 - PL172
2PL201 - PL203
2PL221
2PL401 - PL417
2PL421
2PL441
2PL451 - PL456
2PL471
2PL491
2PL501 - PL506
2PL551 - PL562
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
12 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 13

GroupVariable Number
2PL581
2PL601 - PL603
2PL611
2PL621 - PL626
2PL631 - PL632
1PL711 - PL712
1PL716
2PL717 - PL747
2PL756
2PL758
2PL761 - PL770
2PL781 - PL788
2PL793
1PL801 - PL803
2PM001 - PM006
2PM016 - PM017
2PM021 - PM023
2PM051 - PM066
2PM101 - PM119
2PM141 - PM142
2PM171
2PM181
2PM251 - PM255
2PM281 - PM283
2PM381 - PM399
2PM401 - PM417
2PM541 - PM564
2PN001 - PN002
2PN021 - PN043
2PN081 - PN086
2PN101 - PN117
2PN131 - PN163
2PN401 - PN420
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
13 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 14

GroupVariable Number
2PN431 - PN433
2PN451 - PN456
2PN471 - PN474
2PN481
2PN491 - PN493
2PN501 - PN502
2PN511 - PN512
2PN521
2PP001 - PP054
2PP101 - PP169
2PP181 - PP199
2PP201 - PP205
2PP221
2PP231 - PP243
2PP281 - PP286
2PP301 - PP305
2PP351 - PP353
2PP376 - PP384
2PP391 - PP393
2PP401 - PP440
2PP471 - PP475
2PP501 - PP522
2PP631 - PP634
2PP651 - PP652
2PP671 - PP699
2PP701 - PP733
2PP771 - PP779
2PP801 - PP808
2PP821 - PP827
2PP831 - PP848
2PP851 - PP852
2PP861 - PP877
2PP891 - PP899
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
14 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 15

GroupVariable Number
2PP901 - PP936
2PP946 - PP948
2PP951 - PP952
2PP961 - PP967
2PP981 - PP991
2PP993
2PQ001 - PQ016
2PQ026 - PQ041
2PQ051 - PQ092
2PQ101 - PQ199
2PQ201 - PQ202
2PQ221 - PQ237
2PQ241 - PQ243
2PQ251 - PQ267
2PQ281 - PQ299
2PQ301 - PQ307
2PQ331 - PQ332
2PQ341 - PQ348
2PQ361 - PQ373
2PQ391 - PQ395
2PQ401 - PQ418
2PQ421
2PQ431 - PQ438
2PQ447 - PQ448
2PQ451
2PQ454
2PQ471 - PQ475
2PQ479 - PQ481
2PQ486 - PQ487
2PQ491 - PQ493
2PQ771 - PQ772
2PQ791 - PQ793
2PQ801 - PQ805
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
15 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 16

GroupVariable Number
2PQ931 - PQ935
2PQ951
2PQ971 - PQ997
2PR001 - PR017
2PR021 - PR034
2PR041 - PR045
2PR061 - PR072
2PR077 - PR082
2PR091 - PR092
2PR096
2PR101
2PR121 - PR122
2PR131 - PR132
2PR141 - PR143
2PR161 - PR172
2PR181
2PS601 - PS631
2PS636 - PS638
2PS641 - PS644
2PS651 - PS657
2PS666 - PS669
2PS691 - PS692
2PS701 - PS706
2PS751 - PS799
2PS811
2PS836 - PS837
2PS841 - PS846
2PS851 - PS852
2PS856
2PS861 - PS863
2PS866 - PS868
2PS871 - PS874
2PS896 - PS897
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
16 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 17

GroupVariable Number
2PS901 - PS941
2PS956 - PS957
2PS961 - PS963
2PS971 - PS978
2PT001 - PT015
2PT021 - PT031
2PT041 - PT064
2PT101 - PT105
2PT121 - PT138
2PT146 - PT148
2PT161 - PT170
2PT181 - PT188
2PT211 - PT220
2PT295
2PT301 - PT309
2PT331 - PT360
2PT381 - PT399
2PT401 - PT438
2PT501 - PT517
2PT561 - PT565
2PT581 - PT586
2PT611 - PT621
2PT641 - PT644
2PT651 - PT656
2PT671 - PT672
2PT681 - PT685
2PT701 - PT703
2PT716 - PT717
2PT721 - PT725
2PT801 - PT834
2PT851 - PT854
2PT871 - PT886
2PT901 - PT930
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
17 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 18

GroupVariable Number
2PT971 - PT973
2PT981 - PT985
2PT996
2PU001 - PU025
2PU301
2PU311 - PU313
2PV001 - PV055
2PV201 - PV209
2PV226 - PV229
2PV231 - PV237
2PV271 - PV272
2PV281 - PV287
2PV296
2PV301 - PV302
2PV351
2PV356 - PV357
2PW001 - PW054
2PW061 - PW068
2PW072
2PW086 - PW088
2PW091 - PW094
2PW101 - PW102
2PW106
2PW111 - PW120
2PW156 - PW157
2PW161 - PW171
2PW201 - PW252
2PW261 - PW268
2PW271 - PW276
2PW278
2PW281 - PW293
2PW296
2PW301 - PW327
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
18 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 19

GroupVariable Number
2PW401 - PW408
2PW411 - PW418
2PW421 - PW424
2PW431 - PW435
2PW441 - PW450
2PW461 - PW467
2PW501 - PW504
2PW511 - PW522
2PW524 - PW550
2PW556 - PW557
2PW561 - PW564
2PW571 - PW576
2PW591 - PW596
2PW611 - PW622
2PW631 - PW637
2PW661 - PW662
2PW681 - PW683
2PW701 - PW702
2PW711 - PW717
2PW741 - PW742
2PW761
2PW771
2PW831
2PW851 - PW856
1PX071
1PX701
1PY001 - PY008
1PY021
2PY022
1PY031
2PY036 - PY037
2PY046 - PY048
2PY051 - PY053
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
19 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 20

GroupVariable Number
2PY056 - PY057
2PY101 - PY103
2PY111 - PY113
2PY131 - PY135
2PY141 - PY143
2PY151 - PY154
2PY156 - PY157
2PY161 - PY162
2PY166
2PY191
2PY201
2PY221 - PY222
2PY231
2PY241 - PY244
2PY270 - PY275
2PY281
2PY286
1PY301 - PY304
1PY321 - PY323
1PY341 - PY346
1PY361 - PY362
1PY381
2PY401
2PY409 - PY411
2PY421 - PY422
2PY441
2PY451
2PY461 - PY463
2PY591 - PY595
2PY611 - PY612
2PY621
2PY631
2PY651
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
20 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 21

GroupVariable Number
2PY671 - PY672
2PY721
2PY741
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
Accomplishment of this service bulletin will make sure that any crack in the lower aft skin and the lower
chord of the rear spar at Wing Buttock Line (WBL) 157 is found. If this service bulletin is not done,
undetected cracks can lead to the inability of the lower chord of the rear spar, a principal structural
element, to sustain limit load which could adversely affect the structural integrity of the airplane.
During a Non-Destructive Test (NDT) open hole inspection, a 737-300 operator found a crack indication
in the horizontal flange of the lower chord at WBL157 at 53,481 flight cycles and 66,268 flight hours.
The crack was found while accomplishing a splice repair on a new section of web at the left wing rear
spar. Boeing has received multiple reports of similar crack findings on airplanes between 63,550 and
69,285 total flight cycles.
Analysis has shown that Main Landing Gear (MLG) loading and braking loads result in cyclic fatigue
and local stresses on the structure. Concentrated loading due to the back to back design of the MLG
fitting also contributes to the problem.
This service bulletin provides instructions for inspection of the lower aft skin and the lower chord of the
rear spar for any crack at WBL 157 to make sure they are found and repaired.
Boeing Service Related Problem (SRP) 737-SRP-57-0306 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 737 FTD 57-16004 is related to this service bulletin.
D. Description
Group 1:
Boeing endorses the FAA rules related to Limit of Validity (LOV) and recommends immediate and
permanent removal from service of any airplanes upon reaching the LOV, whether or not it is operated
under FAA jurisdiction. As such, Boeing no longer provides maintenance instructions for airplanes that
have accumulated flight cycles beyond the LOV. 737 Classic airplanes line numbers 1-291 have
accumulated flight cycles beyond the LOV of the maintenance program. 14 CFR 121.1115 and 129.115
prohibit operation of an airplane beyond its LOV.
Group 2:
Do the work that follows on the left and right wing at Wing Buttock Line (WBL) 157:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
21 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 22

1. In inspection areas with no existing external repair:
a. Deactivate the trailing edge flaps.
b. Do a Low Frequency Eddy Current (LFEC) inspection of the lower chord of the rear spar for
any crack and a detailed inspection of the lower aft skin for any crack. If any crack is found,
contact The Boeing Company for repair instructions and do the repair. If no crack is found
repeat the inspections.
c. Activate the trailing edge flaps.
2. In inspection areas with an existing external repair, contact The Boeing Company for instructions
and do the instruction.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
3-5, 4-5737-100, 737-200, 737-200C
Group 2:
Affected Maintenance Zones
ZoneModel
3-5, 4-5737-200, 737-200C
Group 2:
Affected Maintenance Zones
ZoneModel
305, 405737-300, 737-400, 737-500
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Group 1:
Boeing endorses the FAA rules related to Limit of Validity (LOV) and recommends immediate and
permanent removal from service of any airplanes upon reaching the LOV, whether or not it is operated
under FAA jurisdiction. As such, Boeing no longer provides maintenance instructions for airplanes that
have accumulated flight cycles beyond the LOV. 737 Classic airplanes line numbers 1-291 have
accumulated flight cycles beyond the LOV of the maintenance program. 14 CFR 121.1115 and 129.115
prohibit operation of an airplane beyond its LOV.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
22 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 23

When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
A logic diagram showing compliance tasks and compliance times is included as an aid in Appendix A.
Accomplish the required action(s), based on the applicable condition(s) in Table 1, in accordance with
Paragraph 3. Accomplishment Instructions.
The term "external repair" is defined as any combination of a repair doubler and repair tripler.
Group 2:
Table 1: Low Frequency Eddy Current (LFEC) Inspection of the lower chord of the rear spar and detailed
inspection of the lower aft skin on the left and right wing at Wing Buttock Line (WBL) 157
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 4,500
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 66,000
total flight cy-
cles.
Do PART 1: LFEC IN-
SPECTION OF THE
LOWER CHORD OF
THE REAR SPAR AND
DETAILED INSPECTION
OF THE LOWER AFT
SKIN AT WBL 157 for
any crack in inspection
areas with no existing re-
pair.
Airplanes that do not have
an existing external repair
in the inspection area AND
have not done an open
hole High Frequency Eddy
Current (HFEC) inspection
of the fastener holes com-
mon to the lower aft skin
and lower chord of the rear
spar in the inspection area.
(a)
-Within 4,500
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 66,000
total flight cycles
or within 9,000
flight cycles af-
ter the most re-
cent open hole
HFEC inspec-
tion was
done,whichever
occurs later.
Do PART 1: LFEC IN-
SPECTION OF THE
LOWER CHORD OF
THE REAR SPAR AND
DETAILED INSPECTION
OF THE LOWER AFT
SKIN AT WBL 157 for
any crack in inspection
areas with no existing re-
pair.
Airplanes that do not have
an existing external repair
in the inspection area AND
have done an open hole
HFEC inspection of the
fastener holes common to
the lower aft skin and lower
chord of the rear spar in
the inspection area. (a)
-Within 4,500
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 66,000
total flight cy-
cles.
Contact The Boeing
Company for instructions
and do the instruction.
Airplanes that have an ex-
isting external repair in the
inspection area.
-Before further flight.Contact The Boeing
Company for repair in-
structions and do the re-
pair.
CONDITION 1: ANY
CRACK FOUND
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
23 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 24

Group 2:
Table 1: Low Frequency Eddy Current (LFEC) Inspection of the lower chord of the rear spar and detailed
inspection of the lower aft skin on the left and right wing at Wing Buttock Line (WBL) 157
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
4,500 flight cycles.-Repeat PART 1: LFEC
INSPECTION OF THE
LOWER CHORD OF
THE REAR SPAR AND
DETAILED INSPECTION
OF THE LOWER AFT
SKIN AT WBL 157 for
any crack.
CONDITION 2: NO
CRACK FOUND
(a) Accomplishment of an open hole HFEC inspection of the fastener holes common to the lower aft skin
and lower chord of the rear spar in the inspection area is met if the inspection was done in accordance
with 737 NDT Manual Part 6, 51-00-00 Procedure 1, Procedure 11 or Procedure 16 during the accom-
plishment of one of the following:
– 737-300 SRM 57-20-10 Repair 5, 737-400 SRM 57-20-10 Repair 5, or 737-500 SRM 57-20-10 Repair
5.
– Boeing ODA FAA Form 8100-9 approved rear spar web replacement repair.
The inspection area is defined in FIGURE 1 and FIGURE 2.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this inspection for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
24 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 25

• Time to find the tools
Elapsed HoursTask HoursNumber of PersonsTask
0.501.002Open Access
2.505.002Figure 1
2.505.002Figure 2
0.501.002Close Access
6.0012.00TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Boeing Service Letter 737-SL-51-042
b. Boeing Service Related Problem (SRP) 737-SRP-57-0306
c. Service Bulletin Index D6-19567
d. 737 Fleet Team Digest (FTD) 57-16004
e. 737 Non-Destructive Testing (NDT) Manual Part 6, 51-00-00, Part 6, 57-10-26
f. 737-100/200 Aircraft Maintenance Manual (AMM) 27-51-00
g. 737-300/400/500 Aircraft Maintenance Manual (AMM) 27-51-00
h. 737-300 Structural Repair Manual (SRM) 57-20-10
i. 737-400 Structural Repair Manual (SRM) 57-20-10
j. 737-500 Structural Repair Manual (SRM) 57-20-10
2. Data Supplied with this Service Bulletin:
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
25 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 26

3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
Panel Instl - Inspar Wing, Lower.65-45408
Rib Instl - WBL 157.065-45446
Rear Spar Installation-Wing65-45321
The table above lists applicable drawings used to prepare this service bulletin. The drawings are
not necessary to make the specified changes, and are not supplied with this service bulletin. The
drawings may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS but no new DTIs are necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
26 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 27

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the inspection given in this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
None.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
27 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 28

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
28 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT
BLANK PAGE

### Page 29

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 737 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 737
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
5. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
7. Boeing Service Letter 737-SL-51-042, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
29 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 30

8. Refer to Appendix A for logic diagrams. Logic diagrams are provided as an aid only.
Information contained in Paragraph 1.E., Compliance is the primary source for
compliance times. Information in Paragraph 3.B., Work Instructions is the primary
source for tasks required for compliance.
9. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
10. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
11. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an
OPTION number, do all of the ACTION numbers for that CONDITION number or
OPTION number.
12. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
13. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. If a step or sub-step is labeled
"RC Exempt," then the RC requirement is removed from that step or sub-step. An
Alternative Method of Compliance (AMOC) is required for any deviations to RC steps,
including sub-steps and identified figures. Steps not labeled as RC may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC. This is provided that
the RC steps, including sub-steps and identified figures, can still be done as specified,
and the airplane can be put back in an airworthy condition.
B. WORK INSTRUCTIONS
Group 1:
Boeing endorses the FAA rules related to Limit of Validity (LOV) and recommends immediate and
permanent removal from service of any airplanes upon reaching the LOV, whether or not it is operated
under FAA jurisdiction. As such, Boeing no longer provides maintenance instructions for airplanes that
have accumulated flight cycles beyond the LOV. 737 Classic airplanes line numbers 1-291 have
accumulated flight cycles beyond the LOV of the maintenance program. 14 CFR 121.1115 and 129.115
prohibit operation of an airplane beyond its LOV.
Group 2:
1. Do the work that follows in inspection areas with no existing external repair:
a. Deactivate the trailing edge flap system. Refer to 737-100/200 AMM 27-51-007 and
737-300/400/500 AMM 27-51-00 as an accepted procedure.
b. RC - Do PART 1: LFEC INSPECTION OF THE LOWER CHORD OF THE REAR SPAR AND
DETAILED INSPECTION OF THE LOWER AFT SKIN AT WBL 157 for any crack in inspection
areas with no existing external repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
30 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 31

(1) CONDITION 1: ANY CRACK FOUND
(a) Contact the Boeing Company for repair instructions and do the repair.
(2) CONDITION 2: NO CRACK FOUND
(a) Repeat PART 1: LFEC INSPECTION OF THE LOWER CHORD OF THE REAR
SPAR AND DETAILED INSPECTION OF THE LOWER AFT SKIN AT WBL 157 for
any crack at the times specified in Paragraph 1.E., Compliance.
c. Activate the trailing edge flap systems. Refer to 737-100/200 AMM 27-51-00 and
737-300/400/500 AMM 27-51-00 as an accepted procedure.
2. Do the work that follows in inspection areas with an existing external repair:
a. RC - Contact The Boeing Company for instructions and do the instruction.
3. Put the airplane back to a serviceable condition.
PART 1: LFEC INSPECTION OF THE LOWER CHORD OF THE REAR SPAR AND DETAILED
INSPECTION OF THE LOWER AFT SKIN AT WBL 157
1. Do a Low Frequency Eddy Current (LFEC) inspection of the lower chord of the rear spar and a
detailed inspection of the lower aft skin on the left wing for any crack in accordance with FIGURE
1.
2. Do a Low Frequency Eddy Current (LFEC) inspection of the lower chord of the rear spar and a
detailed inspection of the lower aft skin on the right wing for any crack in accordance with FIGURE
2.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
31 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 32 (OCR)

BOEING SERVICE BULLETIN 737-57A1333
ALERT  ALERT
This Figure applies only to: Group 2.
RSS
224.14
UPPER
CHORD
MLG SUPPORT BEAM
MAIN LANDING GEAR
SUPPORT BEAM
MAIN LANDING GEAR  WEB
SUPPORT AFT FITTING
• LOWER
CHORD
LOWER AFT
SKIN
INBD
MAIN LANDING GEAR
SUPPORT AFT FITTING
WBL
157.00
1 8 LOCATIONS  INSPECTION AREA  2549655
FIGURE 1: LEFT WING LOWER AFT SKIN AND LOWER CHORD - WBL 157 - INSPECTION
(SHEET 1 OF 3)
Original Issue: May 12, 2017
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  737-57A1333
Work - See page 1 for details.  32 of 40

### Page 33 (OCR)

BOEING SERVICE BULLETIN 737-57A1333
ALERT  ALERT
RSS
224.14
UPPER CHORD
MAIN LANDING GEAR
SUPPORT BEAM
-WEB
MAIN LANDING GEAR
SUPPORT AFT FITTING
MAIN LANDING GEAR
SUPPORT AFT FITTING
LOWER
/ CHORD
LOWER AFT
SKIN
2.00 (TYPICAL)
WBL
157.00
INSPECTION AREA
FIGURE 1: LEFT WING LOWER AFT SKIN AND LOWER CHORD - WBL 157 - INSPECTION
(SHEET 2 OF 3)
Original Issue: May 12, 2017
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-57A1333
Work - See page 1 for details.  33 of 40

### Page 34

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1-Lower ChordInspect1
(b)1-Lower Aft SkinInspect2
(a) Do a LFEC inspection for any crack in the lower chord around the fastener locations shown in accordance
with 737 NDT Manual Part 6, 57-10-26.
(b) Do a detailed inspection for cracks in the lower aft skin within a minimum of 2.00 inches from the center
of each fastener in the inspection area.
FIGURE 1: LEFT WING LOWER AFT SKIN AND LOWER CHORD - WBL 157 - INSPECTION
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
34 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 35 (OCR)

BOEING SERVICE BULLETIN 737-57A1333
ALERT  ALERT
This Figure applies only to: Group 2.
RSS
224.14
UPPER
CHORD
MLG SUPPORT BEAM
MAIN LANDING GEAR
SUPPORT BEAM
WEB
VAIN LANDING GEAF
SUPPORT AFT FITTING
LOWER
CHORD
LOWER AFT
SKIN
MAIN LANDING GEAR
SUPPORT AFT FITTING
WBL
157.00
INSPECTION AREA  (1) 8 LOCATIONS
FIGURE 2: RIGHT WING LOWER AFT SKIN AND LOWER CHORD - WBL 157 - INSPECTION
(SHEET 1 OF 3)
Original Issue: May 12, 2017
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-57A1333
Work - See page 1 for details.  35 of 40

### Page 36 (OCR)

BOEING SERVICE BULLETIN 737-57A1333
ALERT  ALERT
RSS
_ 224.14
_ UPPER CHORD
MAIN LANDING GEAR
SUPPORT BEAM
WEB -
MAIN LANDING GEAR
SUPPORT AFT FITTING
MAIN LANDING GEAR
SUPPORT AFT FITTING
LOWER
CHORD
LOWER AFT
SKIN
2.00 (TYPICAL)
WBL
157.00
INSPECTION AREA  2551180
FIGURE 2: RIGHT WING LOWER AFT SKIN AND LOWER CHORD - WBL 157 - INSPECTION
(SHEET 2 OF 3)
Original Issue: May 12, 2017
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  737-57A1333
Work - See page 1 for details.  36 of 40

### Page 37

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1-Lower ChordInspect1
(b)1-Lower Aft SkinInspect2
(a) Do a LFEC inspection for any crack in the lower chord around the fastener locations shown in accordance
with 737 NDT Manual Part 6, 57-10-26.
(b) Do a detailed inspection for cracks in the lower aft skin within a minimum of 2.00 inches from the center
of each fastener in the inspection area.
FIGURE 2: RIGHT WING LOWER AFT SKIN AND LOWER CHORD - WBL 157 - INSPECTION
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
37 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 38

This Appendix applies only to: Group 2.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
LFEC INSPECTION OF THE LOWER CHORD OF THE REAR SPAR AND
DETAILED INSPECTION OF THE LOWER AFT SKIN AT WBL 157
PART 1
ANY CRACK FOUNDCONDITION 1
NO CRACK FOUNDCONDITION 2
2. The table below gives the description for the flag notes called out in the logic diagram.
DescriptionFlag Note Letter
Accomplishment of an open hole HFEC inspection of the fastener holes
common to the lower aft skin and lower chord of the rear spar in the inspection
area is met if the inspection was done in accordance with 737 NDT Manual
Part 6, 51-00-00 Procedure 1, Procedure 11 or Procedure 16 during the ac-
complishment of one of the following:
(a)
– 737-300 SRM 57-20-10 Repair 5, 737-400 SRM 57-20-10 Repair 5, or
737-500 SRM 57-20-10 Repair 5.
– Boeing ODA FAA Form 8100-9 approved rear spar web replacement
repair.
The inspection area is defined in FIGURE 1 and FIGURE 2
APPENDIX A:  LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 1: LOW FREQUENCY
EDDY CURRENT (LFEC) INSPECTION OF THE LOWER CHORD OF THE REAR SPAR AND DETAILED
INSPECTION OF THE LOWER AFT SKIN ON THE LEFT AND RIGHT WING AT WBL 157
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 12, 2017
737-57A1333
38 of 40
BOEING SERVICE BULLETIN 737-57A1333
ALERTALERT

### Page 39 (OCR)

BOEING SERVICE BULLETIN 737-57A1333
ALERT  ALERT
AIRPLANES THAT DO NOT HAVE AN
EXISTING EXTERNAL REPAIR IN THE
INSPECTION AREA AND HAVE NOT DONE
AN OPEN HOLE HFEC INSPECTION OF
THE FASTENER HOLES COMMON TO THE
LOWER AFT SKIN AND LOWER CHORD OF
THE REAR SPAR IN THE INSPECTION
AREA (a) >
AIRPLANES THAT DO NOT HAVE AN
EXISTING EXTERNAL REPAIR IN THE
INSPECTION AREA AND HAVE DONE AN
OPEN HOLE HFEC INSPECTION OF THE
FASTENER HOLES COMMON TO THE
LOWER AFT SKIN AND LOWER CHORD
OF THE REAR SPAR IN THE INSPECTION
AREA (a)
WHICHEVER OCCURS LATER
WHICHEVER OCCURS LATER  BEFORE 66,000 TOTAL  FLIGHT CYCLES OR
WITHIN 4,500  WITHIN 9,000 FLIGHT  WITHIN 4,500 FLIGHT
FLIGHT CYCLES  CYCLES AFTER THE  CYCLES AFTER THE
BEFORE 66,000  TOTAL FLIGHT  ORIGINAL ISSUE  AFTER THE  MOST RECENT OPEN  HOLE HFEC  ORIGINAL ISSUE DATE  OF THIS SERVICE
CYCLES  DATE OF THIS  INSPECTION  BULLETIN
SERVICE BULLETIN  WHICHEVER OCCURS
LATER
DO PART 1
CONDITION 1  CONDITION 2
BEFORE FURTHER FLIGHT  NOT TO
EXCEED 4,500
FLIGHT CYCLES
CONTACT THE BOEING COMPANY FOR
REPAIR INSTRUCTIONS AND DO THE REPAIR
REPEAT PART 1
2549653
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 1: LOW FREQUENCY
EDDY CURRENT (LFEC) INSPECTION OF THE LOWER CHORD OF THE REAR SPAR AND DETAILED
INSPECTION OF THE LOWER AFT SKIN ON THE LEFT AND RIGHT WING AT WBL 157
(SHEET 2 OF 3)
Original Issue: May 12, 2017
Export Controlled ECCN: 9E991 - BOEING  737-57A1333
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  39 of 40

### Page 40 (OCR)

BOEING SERVICE BULLETIN 737-57A1333
ALERT  ALERT
AIRPLANES THAT HAVE AN EXISTING
EXTERNAL REPAIR IN THE INSPECTION
AREA
WHICHEVER OCCURS LATER
WITHIN 4,500 FLIGHT
BEFORE 66,000  CYCLES AFTER THE
TOTAL FLIGHT  ORIGINAL ISSUE
CYCLES  DATE OF THIS
SERVICE BULLETIN
CONTACT THE BOEING COMPANY FOR
INSTRUCTIONS AND DO THE
INSTRUCTION  2549654
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 1: LOW FREQUENCY
EDDY CURRENT (LFEC) INSPECTION OF THE LOWER CHORD OF THE REAR SPAR AND DETAILED
INSPECTION OF THE LOWER AFT SKIN ON THE LEFT AND RIGHT WING AT WBL 157
(SHEET 3 OF 3)
Original Issue: May 12, 2017
Export Controlled ECCN: 9E991 - BOEING  737-57A1333
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  40 of 40

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
