# Boeing Alert Requirements Bulletin 737-57A1337 RB: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2018-0074; AD 2018-12-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Requirements Bulletin 737-57A1337 RB](https://openairdocs.org/service-documents/boeing/737-57a1337-rb.md)
- Title as filed: RB-737-57A1337
- Pages: 39
- PDF: https://openairdocs.org/files/sha256/f6/28/f6284cae98f5ffc7cfe2fb8c3578734d1a43a471919b531475f947cc60ed01c9
- Page: https://openairdocs.org/service-documents/boeing/737-57a1337-rb/file/f6284cae98f5

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Requirements Bulletin
ALERT
Number: 737-57A1337 RB
Original Issue: September 14, 2017
ATA System: 5711
SUBJECT: WINGS - Wing Spars - Rear Spar Web, Upper and Lower Chord from Wing Buttock
Line 91 to 155 - Inspection
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2017 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: September 14, 2017
737-57A1337 RB
1 of 39
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
2 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
1. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
A. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
B. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
A. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
B. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
FIGURE 1: LEFT WING - WBL 149 TO WBL 152 - REAR SPAR WEB AND UPPER CHORD - DETAILED
INSPECTION (AREA 1) [Group 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
FIGURE 2: RIGHT WING - WBL 149 TO WBL 152 - REAR SPAR WEB AND UPPER CHORD - DETAILED
INSPECTION (AREA 1) [Group 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
FIGURE 3: LEFT WING - WBL 149 TO WBL 152 - REAR SPAR UPPER CHORD - SURFACE HFEC
INSPECTION (AREA 1) [Group 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
FIGURE 4: RIGHT WING - WBL 149 TO WBL 152 - REAR SPAR UPPER CHORD - SURFACE HFEC
INSPECTION (AREA 1) [Group 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
FIGURE 5: LEFT WING - WBL 91 TO WBL 155 - REAR SPAR WEB, UPPER AND LOWER CHORD -
DETAILED INSPECTION (AREA 2)  [Group 2] . . . . . . . . . . . . . . . . . . . . . . . . 28
FIGURE 6: RIGHT WING - WBL 91 TO WBL 155 - REAR SPAR WEB, UPPER AND LOWER CHORD -
DETAILED INSPECTION (AREA 2)  [Group 2] . . . . . . . . . . . . . . . . . . . . . . . . 31
FIGURE 7: LEFT WING - WBL 91 TO WBL 155 - REAR SPAR WEB, UPPER AND LOWER CHORD -
SURFACE HFEC INSPECTION AND DETAILED INSPECTION (AREA 2)  [Group 2] . . . 34
FIGURE 8: RIGHT WING - WBL 91 TO WBL 155 - REAR SPAR WEB, UPPER AND LOWER CHORD -
SURFACE HFEC INSPECTION AND DETAILED INSPECTION (AREA 2)  [Group 2] . . . 37
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
3 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
4 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
737
Requirements Bulletin
ALERT
Number: 737-57A1337 RB
Original Issue: September 14, 2017
ATA System: 5711
SUBJECT: WINGS - Wing Spars - Rear Spar Web, Upper and Lower Chord from Wing Buttock
Line 91 to 155 - Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING
PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN
(RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL
TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB
WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
1. EFFECTIVITY
A. Airplanes
This service bulletin is applicable to all 737-100/200/200C/300/400/500 Airplanes.
DESCRIPTIONCONFIGURATIONGROUP
737-100/200/200C Airplanes, line numbers 1 thru 291.-1
737-200/200C/300/400/500 Airplanes, line numbers 292 thru 3132.-2
B. Spares Affected
None.
2. CONCURRENT REQUIREMENTS
None.
3. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
Requirements Bulletin 737-57A1337 RB. The Airworthiness Directive will make the compliance tasks and
times given in Requirements Bulletin 737-57A1337 RB mandatory.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
5 of 39

### Page 6

Accomplish the required actions, based on the applicable conditions in Table 1 and Table 2, in accordance
with the Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Group 1:
Boeing endorses the FAA rules related to Limit of Validity (LOV) and recommends immediate and permanent
removal from service of any airplanes upon reaching the LOV, whether or not it is operated under FAA
jurisdiction. As such, Boeing no longer provides maintenance instructions for airplanes that have accumulated
flight cycles beyond the LOV. Airplanes in Group 1 (line numbers 1-291) have accumulated flight cycles
beyond the LOV of the maintenance program. 14 CFR 121.1115 and 129.115 prohibit operation of an
airplane beyond its LOV.
Group 2:
Table 1: Detailed inspection or surface High Frequency Eddy Current (HFEC) inspection for any crack
in the rear spar structure on the left and right wing from Wing Buttock Line (WBL) 149 to WBL 152 (Area
1)
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 3,000
flight cycles af-
ter the original
issue date of
Requirements
Bulletin 737-
57A1337 RB.
Before 45,000
total flight cy-
cles.
OPTION 1: Do a detailed
inspection of the rear
spar web and upper
chord on the left and right
wing from WBL 149 to
WBL 152 for any crack.
All Airplanes
-Within 4,500
flight cycles af-
ter the original
issue date of
Requirements
Bulletin 737-
57A1337 RB.
Before 45,000
total flight cy-
cles.
OPTION 2: Do a surface
HFEC inspection of the
rear spar upper chord on
the left and right wing
from WBL 149 to WBL
152 for any crack.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
6 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 7

Group 2:
Table 1: Detailed inspection or surface High Frequency Eddy Current (HFEC) inspection for any crack
in the rear spar structure on the left and right wing from Wing Buttock Line (WBL) 149 to WBL 152 (Area
1)
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.ACTION 1: Contact The
Boeing Company for re-
pair instructions and do
the repair.
CONDITION 1: ANY
CRACK FOUND DURING
OPTION 1 INSPECTION
3,000 flight cycles.
(b)
-ACTION 2 (OPTION 1):
Repeat the detailed in-
spection of the rear spar
web and upper chord on
the left and right wing
from WBL 149 to WBL
152 for any crack in unre-
paired areas. (b)
(a)Within 3,000 flight cycles after the
most recent OPTION 1 inspection
was done.
ACTION 2 (OPTION 2):
Do a surface HFEC in-
spection of the rear spar
upper chord on the left
and right wing from WBL
149 to WBL 152 for any
crack in unrepaired ar-
eas. (a)
3,000 flight cycles.
(b)
-OPTION 1: Repeat the
detailed inspection of the
rear spar web and upper
chord on the left and right
wing from WBL 149 to
WBL 152 for any crack.
(b)
CONDITION 2: NO
CRACK FOUND DURING
OPTION 1 INSPECTION
(a)Within 3,000 flight cycles after the
most recent OPTION 1 inspection
was done.
OPTION 2: Do a surface
HFEC inspection of the
rear spar upper chord on
the left and right wing
from WBL 149 to WBL
152 for any crack. (a)
-Before further flight.Contact The Boeing
Company for repair in-
structions and do the re-
pair.
CONDITION 3: ANY
CRACK FOUND DURING
OPTION 2 INSPECTION
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
7 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 8

Group 2:
Table 1: Detailed inspection or surface High Frequency Eddy Current (HFEC) inspection for any crack
in the rear spar structure on the left and right wing from Wing Buttock Line (WBL) 149 to WBL 152 (Area
1)
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
(a)Within 4,500 flight cycles after the
most recent OPTION 2 inspection
was done.
OPTION 1: Do a detailed
inspection of the rear
spar web and upper
chord on the left and right
wing from WBL 149 to
WBL 152 for any crack.
(a)
CONDITION 4: NO
CRACK FOUND DURING
OPTION 2 INSPECTION
4,500 flight cycles.
(b)
-OPTION 2: Repeat the
surface HFEC inspection
of the rear spar upper
chord on the left and right
wing from WBL 149 to
WBL 152 for any crack.
(b)
(a) This is not a terminating action. Refer to the applicable condition for further actions.
(b) It is acceptable to change the repeat action from this OPTION to any other OPTION under this CONDI-
TION. The next OPTION must be done within the compliance time for the most recent OPTION.
Group 2:
Table 2: Detailed inspection, or surface HFEC inspection and detailed inspection, for any crack in the
rear spar structure on the left and right wing from WBL 91 to WBL 155 (Area 2)
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 3,000
flight cycles af-
ter the original
issue date of
Requirements
Bulletin 737-
57A1337 RB.
Before 45,000
total flight cy-
cles.
OPTION 1: Do a detailed
inspection of the rear
spar web and the upper
and lower chord on the
left and right wing from
WBL 91 to WBL 155 for
any crack.
All Airplanes
-Within 4,500
flight cycles af-
ter the original
issue date of
Requirements
Bulletin 737-
57A1337 RB.
Before 45,000
total flight cy-
cles.
OPTION 2: Do a surface
HFEC inspection of the
rear spar web, and a de-
tailed inspection of the
upper and lower chord,
on the left and right wing
from WBL 91 to WBL 155
for any crack.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
8 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 9

Group 2:
Table 2: Detailed inspection, or surface HFEC inspection and detailed inspection, for any crack in the
rear spar structure on the left and right wing from WBL 91 to WBL 155 (Area 2)
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.ACTION 1: Contact The
Boeing Company for re-
pair instructions and do
the repair.
CONDITION 5: ANY
CRACK FOUND DURING
OPTION 1 INSPECTION
3,000 flight cycles.
(b)
-ACTION 2 (OPTION 1):
Repeat the detailed in-
spection of the rear spar
web and the upper and
lower chord on the left
and right wing from WBL
91 to WBL 155 for any
crack in unrepaired ar-
eas. (b)
(a)Within 3,000 flight cycles after the
most recent OPTION 1 inspection
was done.
ACTION 2 (OPTION 2):
Do a surface HFEC in-
spection of the rear spar
web, and a detailed in-
spection of the upper and
lower chord, on the left
and right wing from WBL
91 to WBL 155 for any
crack in unrepaired ar-
eas. (a)
3,000 flight cycles.
(b)
-OPTION 1: Repeat the
detailed inspection of the
rear spar web and the
upper and lower chord on
the left and right wing
from WBL 91 to WBL 155
for any crack. (b)
CONDITION 6: NO
CRACK FOUND DURING
OPTION 1 INSPECTION
(a)Within 3,000 flight cycles after the
most recent OPTION 1 inspection
was done.
OPTION 2: Do a surface
HFEC inspection of the
rear spar web, and a de-
tailed inspection of the
upper and lower chord,
on the left and right wing
from WBL 91 to WBL 155
for any crack. (a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
9 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 10

Group 2:
Table 2: Detailed inspection, or surface HFEC inspection and detailed inspection, for any crack in the
rear spar structure on the left and right wing from WBL 91 to WBL 155 (Area 2)
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.ACTION 1: Contact The
Boeing Company for re-
pair instructions and do
the repair.
CONDITION 7: ANY
CRACK FOUND DURING
OPTION 2 INSPECTION
(a)Within 4,500 flight cycles after the
most recent OPTION 2 inspection
was done.
ACTION 2 (OPTION 1):
Do a detailed inspection
of the rear spar web and
the upper and lower
chord on the left and right
wing from WBL 91 to
WBL 155 for any crack in
unrepaired areas. (a)
4,500 flight cycles.
(b)
-ACTION 2 (OPTION 2):
Repeat the surface HFEC
inspection of the rear
spar web, and the de-
tailed inspection of the
upper and lower chord,
on the left and right wing
from WBL 91 to WBL 155
for any crack in unre-
paired areas. (b)
(a)Within 4,500 flight cycles after the
most recent OPTION 2 inspection
was done.
OPTION 1: Do a detailed
inspection of the rear
spar web and the upper
and lower chord on the
left and right wing from
WBL 91 to WBL 155 for
any crack. (a)
CONDITION 8: NO
CRACK FOUND DURING
OPTION 2 INSPECTION
4,500 flight cycles.
(b)
-OPTION 2: Repeat the
surface HFEC inspection
of the rear spar web, and
the detailed inspection of
the upper and lower
chord, on the left and
right wing from WBL 91
to WBL 155 for any crack.
(b)
(a) This is not a terminating action. Refer to the applicable condition for further actions.
(b) It is acceptable to change the repeat action from this OPTION to any other OPTION under this CONDI-
TION. The next OPTION must be done within the compliance time for the most recent OPTION.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
10 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 11

4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This document and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
11 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 12

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
12 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT
BLANK PAGE

### Page 13

5.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 737 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 737
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 737
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
6. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
7. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
8. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
9. Boeing Service Letter 737-SL-51-042, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
10. The instructions in the Work Instructions and the figures can include operation of
tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated Tool and
Equipment Manual, and the Special Tool and Ground Handling Drawing Index contain
data on versions of the tools or test equipment that you can use. It is permitted to
use replaced tools. It is not permitted to use superseded tools.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
13 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 14

11. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
12. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
13. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an
OPTION number, do all of the ACTION numbers for that CONDITION number or
OPTION number.
14. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. For the related SB, some locations are marked RC Start and RC
End to identify the requirements that are restated from the RB. For the related SB,
the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD.
Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations
to steps between RC Start and RC End, including substeps and identified figures.
For the related SB, the steps not between RC Start and RC End may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC; this is provided that the
steps between RC Start and RC End, including sub-steps and identified figures, can
still be done as specified, and the airplane can be put back in an airworthy condition.
Figures not required for compliance are omitted from the RB.
15. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
B. WORK INSTRUCTIONS
Actions Required for Compliance:
1. Requirements
Group 1:
Boeing endorses the FAA rules related to Limit of Validity (LOV) and recommends immediate and
permanent removal from service of any airplanes upon reaching the LOV, whether or not it is
operated under FAA jurisdiction. As such, Boeing no longer provides maintenance instructions for
airplanes that have accumulated flight cycles beyond the LOV. Airplanes in Group 1 (line numbers
1-291) have accumulated flight cycles beyond the LOV of the maintenance program. 14 CFR
121.1115 and 129.115 prohibit operation of an airplane beyond its LOV.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
14 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 15

Group 2:
Table 1: Detailed inspection or surface High Frequency Eddy Current (HFEC) inspection for any crack
in the rear spar structure on the left and right wing from Wing Buttock Line (WBL) 149 to WBL 152 (Area
1)
Refer to the listed procedures
in SB 737-57A1337 Original
Issue or later approved revi-
sions as an accepted proce-
dure:
Method of Compli-
ance
ActionCondition
PART 1: LANDING GEAR
SUPPORT BEAM REMOVAL
AND OPEN ACCESS
-OPTION 1: Do a detailed inspec-
tion of the rear spar web and
upper chord on the left and right
wing from WBL 149 to WBL 152
for any crack.
All Airplanes
-FIGURE 1
and
FIGURE 2
PART 2: LANDING GEAR
SUPPORT BEAM INSTALLA-
TION AND CLOSE ACCESS
-
PART 3: OPEN ACCESS-OPTION 2: Do a surface HFEC
inspection of the rear spar upper
chord on the left and right wing
from WBL 149 to WBL 152 for
any crack.
-FIGURE 3
and
FIGURE 4
PART 4: CLOSE ACCESS-
--ACTION 1: Contact The Boeing
Company for repair instructions
and do the repair.
CONDITION 1: ANY
CRACK FOUND DUR-
ING OPTION 1 IN-
SPECTION PART 1: LANDING GEAR
SUPPORT BEAM REMOVAL
AND OPEN ACCESS
-ACTION 2 (OPTION 1): Repeat
the detailed inspection of the
rear spar web and upper chord
on the left and right wing from
WBL 149 to WBL 152 for any
crack in unrepaired areas. (b)
-FIGURE 1
and
FIGURE 2
PART 2: LANDING GEAR
SUPPORT BEAM INSTALLA-
TION AND CLOSE ACCESS
-
PART 3: OPEN ACCESS-ACTION 2 (OPTION 2): Do a
surface HFEC inspection of the
rear spar upper chord on the left
and right wing from WBL 149 to
WBL 152 for any crack in unre-
paired areas. (a)
-FIGURE 3
and
FIGURE 4
PART 4: CLOSE ACCESS-
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
15 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 16

Group 2:
Table 1: Detailed inspection or surface High Frequency Eddy Current (HFEC) inspection for any crack
in the rear spar structure on the left and right wing from Wing Buttock Line (WBL) 149 to WBL 152 (Area
1)
Refer to the listed procedures
in SB 737-57A1337 Original
Issue or later approved revi-
sions as an accepted proce-
dure:
Method of Compli-
ance
ActionCondition
PART 1: LANDING GEAR
SUPPORT BEAM REMOVAL
AND OPEN ACCESS
-OPTION 1: Repeat the detailed
inspection of the rear spar web
and upper chord on the left and
right wing from WBL 149 to
WBL 152 for any crack. (b)
CONDITION 2: NO
CRACK FOUND DUR-
ING OPTION 1 IN-
SPECTION -FIGURE 1
and
FIGURE 2
PART 2: LANDING GEAR
SUPPORT BEAM INSTALLA-
TION AND CLOSE ACCESS
-
PART 3: OPEN ACCESS-OPTION 2: Do a surface HFEC
inspection of the rear spar upper
chord on the left and right wing
from WBL 149 to WBL 152 for
any crack. (a)
-FIGURE 3
and
FIGURE 4
PART 4: CLOSE ACCESS-
--Contact The Boeing Company
for repair instructions and do the
repair.
CONDITION 3: ANY
CRACK FOUND DUR-
ING OPTION 2 IN-
SPECTION
PART 1: LANDING GEAR
SUPPORT BEAM REMOVAL
AND OPEN ACCESS
-OPTION 1: Do a detailed inspec-
tion of the rear spar web and
upper chord on the left and right
wing from WBL 149 to WBL 152
for any crack. (a)
CONDITION 4: NO
CRACK FOUND DUR-
ING OPTION 2 IN-
SPECTION -FIGURE 1
and
FIGURE 2
PART 2: LANDING GEAR
SUPPORT BEAM INSTALLA-
TION AND CLOSE ACCESS
-
PART 3: OPEN ACCESS-OPTION 2: Repeat the surface
HFEC inspection of the rear
spar upper chord on the left and
right wing from WBL 149 to
WBL 152 for any crack. (b)
-FIGURE 3
and
FIGURE 4
PART 4: CLOSE ACCESS-
(a) This is not a terminating action. Refer to the applicable condition for further actions.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
16 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 17

Group 2:
Table 1: Detailed inspection or surface High Frequency Eddy Current (HFEC) inspection for any crack
in the rear spar structure on the left and right wing from Wing Buttock Line (WBL) 149 to WBL 152 (Area
1)
Refer to the listed procedures
in SB 737-57A1337 Original
Issue or later approved revi-
sions as an accepted proce-
dure:
Method of Compli-
ance
ActionCondition
(b) It is acceptable to change the repeat action from this OPTION to any other OPTION under this CONDITION.
The next OPTION must be done within the compliance time for the most recent OPTION.
Group 2:
Table 2: Detailed inspection, or surface HFEC inspection and detailed inspection, for any crack in the
rear spar structure on the left and right wing from WBL 91 to WBL 155 (Area 2)
Refer to the listed procedures
in SB 737-57A1337 Original
Issue or later approved revi-
sions as an accepted proce-
dure:
Method of Compli-
ance
ActionCondition
PART 3: OPEN ACCESS-OPTION 1: Do a detailed inspec-
tion of the rear spar web and the
upper and lower chord on the
left and right wing from WBL 91
to WBL 155 for any crack.
All Airplanes
-FIGURE 5
and
FIGURE 6
PART 4: CLOSE ACCESS-
PART 3: OPEN ACCESS-OPTION 2: Do a surface HFEC
inspection of the rear spar web,
and a detailed inspection of the
upper and lower chord, on the
left and right wing from WBL 91
to WBL 155 for any crack.
-FIGURE 7
and
FIGURE 8
PART 4: CLOSE ACCESS-
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
17 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 18

Group 2:
Table 2: Detailed inspection, or surface HFEC inspection and detailed inspection, for any crack in the
rear spar structure on the left and right wing from WBL 91 to WBL 155 (Area 2)
Refer to the listed procedures
in SB 737-57A1337 Original
Issue or later approved revi-
sions as an accepted proce-
dure:
Method of Compli-
ance
ActionCondition
--ACTION 1: Contact The Boeing
Company for repair instructions
and do the repair.
CONDITION 5: ANY
CRACK FOUND DUR-
ING OPTION 1 IN-
SPECTION PART 3: OPEN ACCESS-ACTION 2 (OPTION 1): Repeat
the detailed inspection of the
rear spar web and the upper
and lower chord on the left and
right wing from WBL 91 to WBL
155 for any crack in unrepaired
areas. (b)
-FIGURE 5
and
FIGURE 6
PART 4: CLOSE ACCESS-
PART 3: OPEN ACCESS-ACTION 2 (OPTION 2): Do a
surface HFEC inspection of the
rear spar web, and a detailed
inspection of the upper and
lower chord, on the left and right
wing from WBL 91 to WBL 155
for any crack in unrepaired ar-
eas. (a)
-FIGURE 7
and
FIGURE 8
PART 4: CLOSE ACCESS-
PART 3: OPEN ACCESS-OPTION 1: Repeat the detailed
inspection of the rear spar web
and the upper and lower chord
on the left and right wing from
WBL 91 to WBL 155 for any
crack. (b)
CONDITION 6: NO
CRACK FOUND DUR-
ING OPTION 1 IN-
SPECTION
-FIGURE 5
and
FIGURE 6
PART 4: CLOSE ACCESS-
PART 3: OPEN ACCESS-OPTION 2: Do a surface HFEC
inspection of the rear spar web,
and a detailed inspection of the
upper and lower chord, on the
left and right wing from WBL 91
to WBL 155 for any crack. (a)
-FIGURE 7
and
FIGURE 8
PART 4: CLOSE ACCESS-
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
18 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 19

Group 2:
Table 2: Detailed inspection, or surface HFEC inspection and detailed inspection, for any crack in the
rear spar structure on the left and right wing from WBL 91 to WBL 155 (Area 2)
Refer to the listed procedures
in SB 737-57A1337 Original
Issue or later approved revi-
sions as an accepted proce-
dure:
Method of Compli-
ance
ActionCondition
--ACTION 1: Contact The Boeing
Company for repair instructions
and do the repair.
CONDITION 7: ANY
CRACK FOUND DUR-
ING OPTION 2 IN-
SPECTION PART 3: OPEN ACCESS-ACTION 2 (OPTION 1): Do a
detailed inspection of the rear
spar web and the upper and
lower chord on the left and right
wing from WBL 91 to WBL 155
for any crack in unrepaired ar-
eas. (a)
-FIGURE 5
and
FIGURE 6
PART 4: CLOSE ACCESS-
PART 3: OPEN ACCESS-ACTION 2 (OPTION 2): Repeat
the surface HFEC inspection of
the rear spar web, and the de-
tailed inspection of the upper
and lower chord, on the left and
right wing from WBL 91 to WBL
155 for any crack in unrepaired
areas. (b)
-FIGURE 7
and
FIGURE 8
PART 4: CLOSE ACCESS-
PART 3: OPEN ACCESS-OPTION 1: Do a detailed inspec-
tion of the rear spar web and the
upper and lower chord on the
left and right wing from WBL 91
to WBL 155 for any crack. (a)
CONDITION 8: NO
CRACK FOUND DUR-
ING OPTION 2 IN-
SPECTION
-FIGURE 5
and
FIGURE 6
PART 4: CLOSE ACCESS-
PART 3: OPEN ACCESS-OPTION 2: Repeat the surface
HFEC inspection of the rear
spar web, and the detailed in-
spection of the upper and lower
chord, on the left and right wing
from WBL 91 to WBL 155 for
any crack. (b)
-FIGURE 7
and
FIGURE 8
PART 4: CLOSE ACCESS-
(a) This is not a terminating action. Refer to the applicable condition for further actions.
(b) It is acceptable to change the repeat action from this OPTION to any other OPTION under this CONDITION.
The next OPTION must be done within the compliance time for the most recent OPTION.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
19 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 20 (OCR)

REQUIREMENTS BULLETIN 737-57A1337
ALERT  ALERT
This Figure applies only to: Group 2.
MAIN LANDING GEAR
SUPPORT BEAM
REAR SPAR
WBL
71.2
WBL
92.5
WEB
STIFFENER
(TYPICAL)
WBL
114
WBL
128
WBL
135.5
WBL
UPPER  149.1
CHORD
' MAIN LANDING GEAR
TRUNNION BEARING
SUPPORT FITTING
INBOARD MAIN
LANDING GEAR
STABILIZING FITTING
OUTBOARD MAIN
LOWER  LANDING GEAR
CHORD  STABILIZING FITTING
AFT MAIN
LANDING GEAR
SUPPORT FITTING
INBOARD REAR SPAR
2573367
FIGURE 1: LEFT WING - WBL 149 TO WBL 152 - REAR SPAR WEB AND UPPER CHORD - DETAILED
INSPECTION (AREA 1)
(SHEET 1 OF 2)
Original Issue: September 14, 2017
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-57A1337 RB
Work - See page 1 for details.  20 of 39

### Page 21

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)--WEBInspect1
(b)--UPPER CHORDInspect
(a) Do a detailed inspection of the web for any crack.
(b) Do a detailed inspection of the upper chord vertical flange for any crack.
FIGURE 1: LEFT WING - WBL 149 TO WBL 152 - REAR SPAR WEB AND UPPER CHORD - DETAILED
INSPECTION (AREA 1)
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
21 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 22 (OCR)

REQUIREMENTS BULLETIN 737-57A1337
ALERT  ALERT
This Figure applies only to: Group 2.
MAIN LANDING GEAR
SUPPORT BEAM
REAR SPAR
WBL
71.2
WBL
92.5
WEB
STIFFENER
(TYPICAL)
WBL
114
WBL
128
WBL
135.5
WBL
149.1  UPPER
CHORD
MAIN LANDING GEAR  > A
TRUNNION BEARING
SUPPORT FITTING
INBOARD MAIN
LANDING GEAR
STABILIZING FITTING
OUTBOARD MAIN
LANDING GEAR  LOWER
STABILIZING FITTING  I CHORD
AFT MAIN
LANDING GEAR
SUPPORT FITTING
INBOARD REAR SPAR
2573385
FIGURE 2: RIGHT WING - WBL 149 TO WBL 152 - REAR SPAR WEB AND UPPER CHORD - DETAILED
INSPECTION (AREA 1)
(SHEET 1 OF 2)
Original Issue: September 14, 2017
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-57A1337 RB
Work - See page 1 for details.  22 of 39

### Page 23

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)--WEBInspect1
(b)--UPPER CHORDInspect
(a) Do a detailed inspection of the web for any crack.
(b) Do a detailed inspection of the upper chord vertical flange for any crack.
FIGURE 2: RIGHT WING - WBL 149 TO WBL 152 - REAR SPAR WEB AND UPPER CHORD - DETAILED
INSPECTION (AREA 1)
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
23 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 24 (OCR)

REQUIREMENTS BULLETIN 737-57A1337
ALERT  ALERT
This Figure applies only to: Group 2.
MAIN LANDING GEAR
SUPPORT BEAM
REAR SPAR
WBL
71.2
WBL
92.5
WEB
STIFFENER
(TYPICAL)
WBL
114
WBL
128
WBL
135.5
WBL
UPPER  149.1
CHORD
' MAIN LANDING GEAR
TRUNNION BEARING
SUPPORT FITTING
INBOARD MAIN
LANDING GEAR
STABILIZING FITTING
OUTBOARD MAIN
LOWER  LANDING GEAR
CHORD  STABILIZING FITTING
AFT MAIN
LANDING GEAR
SUPPORT FITTING
INBOARD REAR SPAR
2573389
FIGURE 3: LEFT WING - WBL 149 TO WBL 152 - REAR SPAR UPPER CHORD - SURFACE HFEC
INSPECTION (AREA 1)
(SHEET 1 OF 2)
Original Issue: September 14, 2017
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-57A1337 RB
Work - See page 1 for details.  24 of 39

### Page 25

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)--UPPER CHORDInspect1
(a) Do a surface High Frequency Eddy Current (HFEC) inspection of the exposed surfaces of the upper chord
vertical flange along the skin for any crack in accordance with 737 NDT Manual Part 6, 51-00-00, Procedure
4 or 23.
FIGURE 3: LEFT WING - WBL 149 TO WBL 152 - REAR SPAR UPPER CHORD - SURFACE HFEC
INSPECTION (AREA 1)
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
25 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 26 (OCR)

REQUIREMENTS BULLETIN 737-57A1337
ALERT  ALERT
This Figure applies only to: Group 2.
MAIN LANDING GEAR
SUPPORT BEAM
REAR SPAR
WBL
71.2
WBL
92.5
WEB
STIFFENER
(TYPICAL)
WBL
114
WBL
128
WBL
135.5
WBL
149.1  UPPER
CHORD
MAIN LANDING GEAR  > A
TRUNNION BEARING
SUPPORT FITTING
INBOARD MAIN
LANDING GEAR
STABILIZING FITTING
OUTBOARD MAIN
LANDING GEAR  LOWER
STABILIZING FITTING  CHORD
AFT MAIN
LANDING GEAR
SUPPORT FITTING
INBOARD REAR SPAR
2573418
FIGURE 4: RIGHT WING - WBL 149 TO WBL 152 - REAR SPAR UPPER CHORD - SURFACE HFEC
INSPECTION (AREA 1)
(SHEET 1 OF 2)
Original Issue: September 14, 2017
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-57A1337 RB
Work - See page 1 for details.  26 of 39

### Page 27

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)--UPPER CHORDInspect1
(a) Do a surface High Frequency Eddy Current (HFEC) inspection of the exposed surfaces of the upper chord
vertical flange along the skin for any crack in accordance with 737 NDT Manual Part 6, 51-00-00, Procedure
4 or 23.
FIGURE 4: RIGHT WING - WBL 149 TO WBL 152 - REAR SPAR UPPER CHORD - SURFACE HFEC
INSPECTION (AREA 1)
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
27 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 28 (OCR)

REQUIREMENTS BULLETIN 737-57A1337
ALERT  ALERT
This Figure applies only to: Group 2.
MAIN LANDING GEAR
SUPPORT BEAM
REAR SPAR
WBL
71.2
WBL
92.5
WEB
STIFFENER
(TYPICAL)
WBL
114
WBL
128
WBL
135.5
WBL
UPPER  149.1
CHORD
' MAIN LANDING GEAR
TRUNNION BEARING
SUPPORT FITTING
INBOARD MAIN
LANDING GEAR
B  STABILIZING FITTING
OUTBOARD MAIN
LOWER  LANDING GEAR
CHORD  STABILIZING FITTING
AFT MAIN
LANDING GEAR
SUPPORT FITTING
INBOARD REAR SPAR
2569643
FIGURE 5: LEFT WING - WBL 91 TO WBL 155 - REAR SPAR WEB, UPPER AND LOWER CHORD -
DETAILED INSPECTION (AREA 2)
(SHEET 1 OF 3)
Original Issue: September 14, 2017
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-57A1337 RB
Work - See page 1 for details.  28 of 39

### Page 29 (OCR)

REQUIREMENTS BULLETIN 737-57A1337
ALERT  ALERT
UPPER
CHORD
WBL  WEB
WBL  114
128
LOWER  INBOARD REAR SPAR
CHORD  INBD
INBOARD MAIN  A-A  MAIN LANDING GEAR
LANDING GEAR  TRUNNION BEARING
STABILIZING  SUPPORT FITTING
FITTING
WBL  149.1  (TYPICAL  STIFFENER  135.5  WBL  WBL  128
AFT MAIN
LANDING GEAR  OUTBOARD MAIN
SUPPORT FITTING  INBOARD REAR SPAR  LANDING GEAR
STABILIZING
B-B  INBD  FITTING  2569840
DETAILED INSPECTION
FIGURE 5: LEFT WING - WBL 91 TO WBL 155 - REAR SPAR WEB, UPPER AND LOWER CHORD -
DETAILED INSPECTION (AREA 2)
(SHEET 2 OF 3)
Original Issue: September 14, 2017
Export Controlled ECCN: 9E991 - BOEING  737-57A1337 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  29 of 39

### Page 30

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)--WEBInspect1
(b)--UPPER CHORDInspect
(c)--LOWER CHORDInspect
(a) Do a detailed inspection of the exposed surfaces of the web for any crack.
(b) Do a detailed inspection of the exposed surfaces of the upper chord vertical flange for any crack.
(c) Do a detailed inspection of the exposed surfaces of the lower chord vertical flange for any crack.
FIGURE 5: LEFT WING - WBL 91 TO WBL 155 - REAR SPAR WEB, UPPER AND LOWER CHORD -
DETAILED INSPECTION (AREA 2)
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
30 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 31 (OCR)

REQUIREMENTS BULLETIN 737-57A1337
ALERT  ALERT
This Figure applies only to: Group 2.
MAIN LANDING GEAR
SUPPORT BEAM
REAR SPAR
WBL
71.2
WBL
92.5
WEB
STIFFENER
(TYPICAL)
WBL
114
WBL
128
WBL
135.5
WBL
149.1  UPPER
CHORD
MAIN LANDING GEAR
TRUNNION BEARING
SUPPORT FITTING
INBOARD MAIN "
LANDING GEAR
STABILIZING FITTING  B
OUTBOARD MAIN
LANDING GEAR  LOWER
STABILIZING FITTING  CHORD
AFT MAIN
LANDING GEAR
SUPPORT FITTING
INBOARD REAR SPAR
FIGURE 6: RIGHT WING - WBL 91 TO WBL 155 - REAR SPAR WEB, UPPER AND LOWER CHORD -
DETAILED INSPECTION (AREA 2)
(SHEET 1 OF 3)
Original Issue: September 14, 2017
Export Controlled ECCN: 9E991 - BOEING  737-57A1337 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  31 of 39

### Page 32 (OCR)

REQUIREMENTS BULLETIN 737-57A1337
ALERT  ALERT
WBL  UPPER
92.5  WEB  WBL  114  CHORD  WBL
128
INBOARD REAR SPAR  LOWER
CHORD
MAIN LANDING GEAR  TRUNNION BEARING  INBD  A-A  LANDING GEAR  INBOARD MAIN
SUPPORT FITTING  STABILIZING
FITTING
WBL  128  135.5  WBL  (TYPICAL)  STIFFENER  149.1  WBL
AFT MAIN
OUTBOARD MAIN  LANDING GEAR
LANDING GEAR  INBOARD REAR SPAR  SUPPORT FITTING
STABILIZING
FITTING  NBD  B-B
DETAILED INSPECTION  2571362
FIGURE 6: RIGHT WING - WBL 91 TO WBL 155 - REAR SPAR WEB, UPPER AND LOWER CHORD -
DETAILED INSPECTION (AREA 2)
(SHEET 2 OF 3)
Original Issue: September 14, 2017
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  737-57A1337 RB
Work - See page 1 for details.  32 of 39

### Page 33

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)--WEBInspect1
(b)--UPPER CHORDInspect
(c)--LOWER CHORDInspect
(a) Do a detailed inspection of the exposed surfaces of the web for any crack.
(b) Do a detailed inspection of the exposed surfaces of the upper chord vertical flange for any crack.
(c) Do a detailed inspection of the exposed surfaces of the lower chord vertical flange for any crack.
FIGURE 6: RIGHT WING - WBL 91 TO WBL 155 - REAR SPAR WEB, UPPER AND LOWER CHORD -
DETAILED INSPECTION (AREA 2)
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
33 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 34 (OCR)

REQUIREMENTS BULLETIN 737-57A1337
ALERT  ALERT
This Figure applies only to: Group 2.
MAIN LANDING GEAR
SUPPORT BEAM
REAR SPAR
WBL
71.2
WBL
92.5
WEB
STIFFENER
(TYPICAL)
WBL
114
WBL
128
WBL
135.5
WBL
UPPER  149.1
CHORD
' MAIN LANDING GEAR
TRUNNION BEARING
SUPPORT FITTING
INBOARD MAIN
LANDING GEAR
B  STABILIZING FITTING
OUTBOARD MAIN
LOWER  LANDING GEAR
CHORD  STABILIZING FITTING
AFT MAIN
LANDING GEAR
SUPPORT FITTING
INBOARD REAR SPAR
2571369
FIGURE 7: LEFT WING - WBL 91 TO WBL 155 - REAR SPAR WEB, UPPER AND LOWER CHORD - SURFACE
HFEC INSPECTION AND DETAILED INSPECTION (AREA 2)
(SHEET 1 OF 3)
Original Issue: September 14, 2017
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-57A1337 RB
Work - See page 1 for details.  34 of 39

### Page 35 (OCR)

REQUIREMENTS BULLETIN 737-57A1337
ALERT  ALERT
UPPER  WEB
WBL  CHORD  WEB  WBL  114  (TYPICAL)  STIFFENER
128
INBOARD REAR SPAR
LOWER  INBD
CHORD  INBOARD MAIN  A-A  MAIN LANDING GEAR
LANDING GEAR  TRUNNION BEARING
STABILIZING  SUPPORT FITTING
FITTING
UPPER
WEB  149.1  WBL  CHORD  135.5  WBL  WBL  128
AFT MAIN
LANDING GEAR  OUTBOARD MAIN
SUPPORT FITTING  LOWER  CHORD  WEB  LANDING GEAR  STABILIZING
FITTING
DETAILED INSPECTION  INBOARD REAR SPAR
INBD  2571371
SURFACE HFEC INSPECTION  B-B
FIGURE 7: LEFT WING - WBL 91 TO WBL 155 - REAR SPAR WEB, UPPER AND LOWER CHORD - SURFACE
HFEC INSPECTION AND DETAILED INSPECTION (AREA 2)
(SHEET 2 OF 3)
Original Issue: September 14, 2017
Export Controlled ECCN: 9E991 - BOEING  737-57A1337 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  35 of 39

### Page 36

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)--SEALANTRemove1
(b)--WEBInspect
(c)--UPPER CHORDInspect2
(d)--LOWER CHORDInspect3
(a) Remove sealant from the surface High Frequency Eddy Current (HFEC) inspection area. Refer to 737-
100/200 AMM 51-31-00 or 737-300/400/500 AMM 51-31-00 as an accepted procedure.
(b) Do a surface HFEC inspection of the exposed surfaces of the web, along the edge of the upper and lower
chord flange and the stiffeners, for any crack in accordance with 737 NDT Manual Part 6, 51-00-00, Pro-
cedure 4 or 23.
(c) Do a detailed inspection of the exposed surfaces of the upper chord vertical flange for any crack.
(d) Do a detailed inspection of the exposed surfaces of the lower chord vertical flange for any crack.
FIGURE 7: LEFT WING - WBL 91 TO WBL 155 - REAR SPAR WEB, UPPER AND LOWER CHORD - SURFACE
HFEC INSPECTION AND DETAILED INSPECTION (AREA 2)
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
36 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

### Page 37 (OCR)

REQUIREMENTS BULLETIN 737-57A1337
ALERT  ALERT
This Figure applies only to: Group 2.
MAIN LANDING GEAR
SUPPORT BEAM
REAR SPAR
WBL
71.2
WBL
92.5
WEB
STIFFENER
(TYPICAL)
WBL
114
WBL
128
WBL
135.5
WBL
149.1  UPPER
CHORD
MAIN LANDING GEAR
TRUNNION BEARING
SUPPORT FITTING
INBOARD MAIN "
LANDING GEAR
STABILIZING FITTING  B
OUTBOARD MAIN
LANDING GEAR  LOWER
STABILIZING FITTING  CHORD
AFT MAIN
LANDING GEAR
SUPPORT FITTING
INBOARD REAR SPAR
2571414
FIGURE 8: RIGHT WING - WBL 91 TO WBL 155 - REAR SPAR WEB, UPPER AND LOWER CHORD -
SURFACE HFEC INSPECTION AND DETAILED INSPECTION (AREA 2)
(SHEET 1 OF 3)
Original Issue: September 14, 2017
Export Controlled ECCN: 9E991 - BOEING  737-57A1337 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  37 of 39

### Page 38 (OCR)

REQUIREMENTS BULLETIN 737-57A1337
ALERT  ALERT
WBL  WEB  UPPER
92.5  STIFFENER  WEB  CHORD
(TYPICAL)  WBL  114  WBL
128
INBOARD REAR SPAR
INBD  LOWER
TRUNNION BEARING  MAIN LANDING GEAR  A-A  LANDING GEAR  INBOARD MAIN  CHORD
SUPPORT FITTING  STABILIZING
UPPER  FITTING
CHORD  WEB
WBL  WBL
128  135.5  149.1  WBL
AFT MAIN
OUTBOARD MAIN  LANDING GEAR  WEB  LOWER  CHORD  LANDING GEAR  SUPPORT FITTING
STABILIZING  INBD
FITTING
INBOARD REAR SPAR
DETAILED INSPECTION  B-B  2571409
SURFACE HFEC INSPECTION
FIGURE 8: RIGHT WING - WBL 91 TO WBL 155 - REAR SPAR WEB, UPPER AND LOWER CHORD -
SURFACE HFEC INSPECTION AND DETAILED INSPECTION (AREA 2)
(SHEET 2 OF 3)
Original Issue: September 14, 2017
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-57A1337 RB
Work - See page 1 for details.  38 of 39

### Page 39

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)--SEALANTRemove1
(b)--WEBInspect
(c)--UPPER CHORDInspect2
(d)--LOWER CHORDInspect3
(a) Remove sealant from the surface High Frequency Eddy Current (HFEC) inspection area. Refer to 737-
100/200 AMM 51-31-00 or 737-300/400/500 AMM 51-31-00 as an accepted procedure.
(b) Do a surface HFEC inspection of the exposed surfaces of the web, along the edge of the upper and lower
chord flange and the stiffeners, for any crack in accordance with 737 NDT Manual Part 6, 51-00-00, Pro-
cedure 4 or 23.
(c) Do a detailed inspection of the exposed surfaces of the upper chord vertical flange for any crack.
(d) Do a detailed inspection of the exposed surfaces of the lower chord vertical flange for any crack.
FIGURE 8: RIGHT WING - WBL 91 TO WBL 155 - REAR SPAR WEB, UPPER AND LOWER CHORD -
SURFACE HFEC INSPECTION AND DETAILED INSPECTION (AREA 2)
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 14, 2017
737-57A1337 RB
39 of 39
REQUIREMENTS BULLETIN 737-57A1337
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
