# Boeing Alert Service Bulletin 747-21A2571: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-6147; AD 2016-09-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 747-21A2571](https://openairdocs.org/service-documents/boeing/747-21a2571.md)
- Title as filed: SB-747-21A2571-00
- Pages: 46
- PDF: https://openairdocs.org/files/sha256/1e/7a/1e7a6e9272f3c36f90ea3eed670e82e31a8be7c2dcd2e40bf30a5a4bead47a7d
- Page: https://openairdocs.org/service-documents/boeing/747-21a2571/file/1e7a6e9272f3

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
747
Service Bulletin
ALERT
Number: 747-21A2571
Original Issue: December 04, 2015
ATA System: 2121
SUBJECT: AIR CONDITIONING - Distribution - Occupant Backup Air Supply Flex Hose and Clamp
- Inspection
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2015 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: December 04, 2015
747-21A2571
1 of 46
2.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
2 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 13
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 15
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 16
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
FIGURE 1: MAIN DECK PASSENGER COMPARTMENT - FLOOR PANEL REMOVAL . . . . . . . . 21
FIGURE 2: MAIN DECK PASSENGER COMPARTMENT - FLOOR PANEL REMOVAL . . . . . . . . 23
FIGURE 3: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - CLAMP
DETAILED INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
FIGURE 4: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - CLAMP
TORQUE CHECK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
FIGURE 5: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - CORRECT
CLAMP TORQUE APPLICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
FIGURE 6: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - FLEX
HOSE GENERAL VISUAL INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
FIGURE 7: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - FLEX
HOSE REPLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
3 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 4

FIGURE 8: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY -
INSTALLATION CORRECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
FIGURE 9: MAIN DECK PASSENGER COMPARTMENT - FLOOR PANEL INSTALLATION . . . . . 40
FIGURE 10: MAIN DECK PASSENGER COMPARTMENT - FLOOR PANEL INSTALLATION . . . . . 42
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: OCCUPANT BACKUP
AIR SUPPLY - CLAMP AND FLEX HOSE INSPECTIONS . . . . . . . . . . . . . . . . . 44
APPENDIX B: PRESSURE SENSITIVE TAPE INSTALLATION (BAC 5801) . . . . . . . . . . . . . . . . 46
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
4 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 5

Commercial 
Airplanes
747
Service Bulletin
ALERT
SummaryNumber: 747-21A2571Original Issue: December 04, 2015
ATA System: 2121
SUBJECT: AIR CONDITIONING - Distribution - Occupant Backup Air Supply Flex Hose and Clamp
- Inspection
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Accomplishment of this service bulletin will make sure that the inboard clamp for the flex hose for the occupant
backup air supply is installed correctly. If this service bulletin is not done, the flex hose for the occupant backup
air supply can become disconnected and in the occurrence of a cargo fire, the decreased airflow to the main
deck could let smoke and/or toxic fumes into the main deck passenger compartment which could result in serious
or fatal passenger or cabin crew injuries.
An operator found a flex hose of the occupant backup air supply, disconnected from the adjacent fiberglass duct
on two airplanes during a maintenance visit. One of the flex hoses had a tear on the disconnected edge. A
Boeing investigation found that these incidents were caused by the incorrect installation of clamp on the inboard
end of the flex hose, which let the flex hose to slowly become disconnected from the adjacent fiberglass duct.
No related system faults were reported.
This service bulletin gives instructions to do a detailed inspection of the inboard clamp of the occupant backup
air supply to make sure it is installed correctly and a general visual inspection of the flex hose to make sure it
is not damaged.
Boeing Service Related Problem (SRP) 747-8-SRP-21-0232 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 747 FTD 21-15001 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
5 of 46

### Page 6

ReferenceAffectedPlanning Data
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedNoPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected
(Flight Crew Operations Manual and/or
FAA Approved Airplane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION
Do a detailed inspection of the clamp at the inboard end of the flex hose connection to find if the clamp is located
correctly. If the clamp is located correctly, do a check of the clamp torque. Apply the correct torque if the clamp
is found to be incorrectly torqued. If the clamp is not located correctly, do a general visual inspection of the flex
hose for damage. Replace damaged flex hose.
EFFECTIVITY
747-8 Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of May 6, 2015. Please refer to Paragraph
2.B., Industry Support Information. The warranty remedies will expire eight years from the original issue date of
this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
6 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 7 (OCR)

BOEING SERVICE BULLETIN 747-21A2571
ALERT  ALERT
Refer to Paragraph 2.A., Material - Price and Availability.
STA
1241
STA
1241  ALBL
33.99
OCCUPANT
BACKUP AIR
SUPPLY DUCT
FLOOR
BEAM
FLEX HOSE  ASSEMBLY
DO A DETAILED INSPECTION OF THE CLAMP
FOR CORRECT CLAMP LOCATION. IF THE
CLAMP IS CORRECTLY LOCATED DO A CHECK
OF THE CLAMP TORQUE AND CORRECT THE
TORQUE IF NECESSARY. IF THE CLAMP IS
INCORRECTLY LOCATED DO A GENERAL
VISUAL INSPECTION OF THE FLEX HOSE FOR
FOUND DAMAGED.  DAMAGE. REPLACE THE FLEX HOSE IF IT IS  2450749
Original Issue: December 04, 2015
Export Controlled ECCN: 9E991 - BOEING  747-21A2571
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  7 of 46

### Page 8

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
8 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
747
Service Bulletin
ALERT
Number: 747-21A2571
Original Issue: December 04, 2015
ATA System: 2121
SUBJECT: AIR CONDITIONING - Distribution - Occupant Backup Air Supply Flex Hose and Clamp
- Inspection
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D6-30300 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is applicable to 747-8 Airplanes, line numbers 1434-1508, except 1435, 1495
and 1506, in 1 Group. The Variable Numbers and Group Information for the applicable airplanes
is given below.
DESCRIPTIONCONFIGURATIONGROUP
747-8 Airplanes that may have an incorrectly installed clamp at the
inboard end of the flex hose for the occupant backup air supply.
-1
Airplane Models:
747-8
GroupVariable Number
1RC001 - RC008
1RC022 - RC036
1RC066 - RC068
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
9 of 46

### Page 10

2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
Accomplishment of this service bulletin will make sure that the inboard clamp for the flex hose for the
occupant backup air supply is installed correctly. If this service bulletin is not done, the flex hose for
the occupant backup air supply can become disconnected and in the occurrence of a cargo fire, the
decreased airflow to the main deck could let smoke and/or toxic fumes into the main deck passenger
compartment which could result in serious or fatal passenger or cabin crew injuries.
An operator found a flex hose of the occupant backup air supply, disconnected from the adjacent
fiberglass duct on two airplanes during a maintenance visit. One of the flex hoses had a tear on the
disconnected edge. A Boeing investigation found that these incidents were caused by the incorrect
installation of clamp on the inboard end of the flex hose, which let the flex hose to slowly become
disconnected from the adjacent fiberglass duct. No related system faults were reported.
This service bulletin gives instructions to do a detailed inspection of the inboard clamp of the occupant
backup air supply to make sure it is installed correctly and a general visual inspection of the flex hose
to make sure it is not damaged.
Boeing Service Related Problem (SRP) 747-8-SRP-21-0232 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 747 FTD 21-15001 is related to this service bulletin.
D. Description
Do a detailed inspection of the clamp at the inboard end of the flex hose connection to find if the clamp
is located correctly. If the clamp is located correctly, do a check of the clamp torque. Apply the correct
torque if the clamp is found to be incorrectly torqued. If the clamp is not located correctly, do a general
visual inspection of the flex hose for damage. Replace damaged flex hose.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
131A747-8
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Do the required actions in accordance with Paragraph 3., Accomplishment Instructions.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
10 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 11

A logic diagram showing compliance tasks and compliance times is included as an aid in APPENDIX
A.
Table 1: OCCUPANT BACKUP AIR SUPPLY - CLAMP AND FLEX HOSE INSPECTIONS
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 36 months
after the original is-
sue date of this
service bulletin.
Do PART 1: CLAMP DE-
TAILED INSPECTION to
find if the clamp is located
correctly.
All airplanes
-Before further
flight.
Do PART 2: CLAMP
TORQUE CHECK for the
correct torque.
CONDITION 1: CLAMP
LOCATED CORRECTLY.
-Before further
flight.
Do PART 3: CORRECT
CLAMP TORQUE APPLI-
CATION.
CONDITION 2: CLAMP
TORQUE IS NOT 13 TO
17 INCH-POUNDS.
--No further action is neces-
sary.
CONDITION 3: CLAMP
TORQUE IS 13 TO 17
INCH-POUNDS.
-Before further
flight.
Do PART 4: FLEX HOSE
GENERAL VISUAL IN-
SPECTION for damage.
CONDITION 4: CLAMP
LOCATED INCORRECT-
LY.
-Before further
flight.
Do PART 5: FLEX HOSE
REPLACEMENT.
CONDITION 5: FLEX
HOSE HAS DAMAGE.
-Before further
flight.
Do PART 6: INSTALLA-
TION CORRECTION.
CONDITION 6: FLEX
HOSE HAS NO DAMAGE.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this service bulletin for each
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with
operator task hour data if necessary. The estimate does not include lost time. These are some examples
of lost time:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
11 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 12

• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools.
Elapsed HoursTask HoursNumber of PersonsTask
1.251.251Open Access
0.500.501FIGURE 1
0.700.701FIGURE 2 (a)
0.100.101FIGURE 3
0.100.101FIGURE 4 (b)
0.100.101FIGURE 5 (c)
0.100.101FIGURE 6 (d)
0.500.501FIGURE 7 (a)
0.150.151FIGURE 8 (e)
0.350.351FIGURE 9
0.500.501FIGURE 10 (a)
1.251.251Close Access
(f)(f)TOTAL FOR EACH AIRPLANE
(a) Only necessary if Condition 5 is found.
(b) Only necessary if Condition 1 is found.
(c) Only necessary if Condition 2 is found.
(d) Only necessary if Condition 4 is found.
(e) Only necessary if Condition 6 is found.
(f) A total is not given because the task usage is variable. Add the values of the applicable
tasks to get the total.
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Boeing Service Related Problem (SRP) 747-8-SRP-21-0232
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
12 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 13

b. Service Bulletin Index D6-30300
c. Standard Overhaul Practices Manual (SOPM) 20-30-03, 20-50-12
d. 747 Fleet Team Digest (FTD) 21-15001
e. 747-8 Aircraft Maintenance Manual (AMM) 21-00-00, 21-25-00, 25-25-01, 25-27-01, 53-21-02
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
DUCT INSTL - BACKUP OCCUPIED AIR DISTR SEC 44214U1001
The table above lists applicable drawings used to prepare this service bulletin. The drawings are
not necessary to make the specified changes, and are not supplied with this service bulletin. The
drawings may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
13 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 14

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
14 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT
BLANK PAGE

### Page 15

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane. As an alternative, operators can purchase the parts from Boeing Spares. This service bulletin
does not show the Boeing price and supply data.
B. Industry Support Information
Boeing warranty remedies are available for 747-8 airplanes in warranty as of May 6, 2015. For task
hour reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing Fleet
Support Contracts - Warranty. The warranty remedies will expire eight years from the original issue
date of this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
The following parts or materials are necessary to do the change in this service bulletin. Parts and
materials in the manuals given in Paragraph 1.J., References, can also be necessary. Examine
operator part and material supply to make sure all necessary parts and materials are available.
NotesNameQTYPart Number / Specification
(a)Flex Hose1BACD40V2220-0142
(a)Strap1BACS38K6
(a) (b)Protective Tape1 RollNITTO (formerly Permacel) P-422
(a) Only necessary if Condition 5 is found.
(b) Can be purchased from: Nitto Denko Automotive New Jersey Inc (Cage Code
V99742), 1990 Rutgers University Blvd, Lakewood, NJ 08701, USA. Tel: 201-
645-4950, Fax: 201-645-4951. Website: www.nittousa.com
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
15 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 16

E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
16 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 17

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 747-8 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 747-8
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
5. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
6. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance unless otherwise
specified. A mirror may be necessary to enhance visual access to all exposed surfaces
in the inspection area. This level of inspection is made under normally available
lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may
require removal or opening of access panels or doors. Stands, ladders or platforms
may be required to gain proximity to the area being checked.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
17 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 18

7. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
8. Refer to APPENDIX A for logic diagram. Logic diagrams are provided as an aid only.
Information contained in Paragraph 1.E., Compliance is the primary source for
compliance times. Information in Paragraph 3.B., Work Instructions is the primary
source for tasks required for compliance.
9. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
10. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
11. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
12. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
13. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. An Alternative Method of
Compliance (AMOC) is required for any deviations to RC steps, including sub-steps
and identified figures. Steps not labeled as RC may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC. This is provided that the RC steps, including
sub-steps and identified figures, can still be done as specified, and the airplane can
be put back in an airworthy condition.
B. WORK INSTRUCTIONS
1. Deactivate the recirculation system. Refer to 747-8 AMM 21-25-00 as an accepted procedure.
2. If not already done, deactivate the supply of conditioned air. Refer to 747-8 AMM 21-00-00 as an
accepted procedure.
3. Make sure that the PACK 1, PACK 2 and PACK 3 switchlights (S8, S9, S10) are set to the OFF
position (ON lamp is not illuminated), on the bleed air control module (M7328) at the pilot's overhead
panel (P5) and attach a DO-NOT-OPERATE tag.
4. Remove passenger seats between Body Station (STA) 1209 and STA 1229 in the center section
of the main deck passenger compartment. Refer to 747-8 AMM 25-25-01 as an accepted procedure.
5. Remove the carpet between approximately STA 1209 and STA 1229, and between Left Buttock
Line (LBL) 11 and LBL 34 in the main deck passenger compartment. Refer to 747-8 AMM 25-27-01
as an accepted procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
18 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 19

6. Remove floor panel 241 JJF in the main deck passenger compartment in accordance with FIGURE
1.
7. Do PART 1: CLAMP DETAILED INSPECTION to find if the clamp is located correctly.
a. CONDITION 1: CLAMP LOCATED CORRECTLY.
(1) Do PART 2: CLAMP TORQUE CHECK for the correct torque.
(a) CONDITION 2: CLAMP TORQUE IS NOT 13 TO 17 INCH-POUNDS.
1) Do PART 3: CORRECT CLAMP TORQUE APPLICATION.
(b) CONDITION 3: CLAMP TORQUE IS 13 TO 17 INCH-POUNDS.
1) No further action is necessary.
b. CONDITION 4: CLAMP LOCATED INCORRECTLY.
(1) Do PART 4: FLEX HOSE GENERAL VISUAL INSPECTION for damage.
(a) CONDITION 5: FLEX HOSE HAS DAMAGE.
1) Do PART 5: FLEX HOSE REPLACEMENT.
(b) CONDITION 6: FLEX HOSE HAS NO DAMAGE.
1) Do PART 6: INSTALLATION CORRECTION.
8. Install floor panel 241 JJF in the main deck passenger compartment in accordance with FIGURE
9.
9. Install the carpet between approximately STA 1209 and STA 1229, and between LBL 11 and LBL
34 in the main deck passenger compartment. Refer to 747-8 AMM 25-27-01 as an accepted
procedure.
10. Install passenger seats between STA 1209 and STA 1229 in the center section of the main deck
passenger compartment. Refer to 747-8 AMM 25-25-01 as an accepted procedure.
11. Activate the supply of conditioned air. Refer to 747-8 AMM 21-00-00 as an accepted procedure.
12. Activate the recirculation system. Refer to 747-8 AMM 21-25-00 as an accepted procedure.
13. Put the airplane back to a serviceable condition.
PART 1: CLAMP DETAILED INSPECTION
1. RC: Do a detailed inspection of the clamp at the inboard end of the flex hose connection to find if
the clamp is located correctly, in accordance with FIGURE 3.
PART 2: CLAMP TORQUE CHECK
1. RC: Do a check of the clamp for the correct torque in accordance with FIGURE 4.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
19 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 20

PART 3: CORRECT CLAMP TORQUE APPLICATION
1. RC: Torque the clamp correctly in accordance with FIGURE 5.
PART 4: FLEX HOSE GENERAL VISUAL INSPECTION
1. RC: Do a general visual inspection of the flex hose for damage in accordance with FIGURE 6.
PART 5: FLEX HOSE REPLACEMENT
1. Remove the carpet between approximately STA 1155 and STA 1229, and between LBL 34 and
LBL 75.92 in the main deck passenger compartment. Refer to 747-8 AMM 25-27-01 as an accepted
procedure.
2. Remove floor panel 241 EEF in accordance with FIGURE 2.
3. RC: Replace the flex hose in accordance with FIGURE 7.
4. Install floor panel 241 EEF in accordance with FIGURE 10.
5. Install the carpet between approximately STA 1155 and STA 1229, and between LBL 34 and LBL
75.92 in the main deck passenger compartment. Refer to 747-8 AMM 25-27-01 as an accepted
procedure.
PART 6: INSTALLATION CORRECTION
1. RC: Install the flex hose and the clamp correctly in accordance with FIGURE 8.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
20 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 21 (OCR)

BOEING SERVICE BULLETIN 747-21A2571
ALERT  ALERT
STA
1319
STA  STA
1209  1319
— BL
FWD
•  •
2451305
FIGURE 1: MAIN DECK PASSENGER COMPARTMENT - FLOOR PANEL REMOVAL
(SHEET 1 OF 2)
Original Issue: December 04, 2015
Export Controlled ECCN: 9E991 - BOEING  747-21A2571
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  21 of 46

### Page 22

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
Refer to 747-8 AMM
53-21-02 as an ac-
cepted procedure.
1241 JJFFLOOR PANELRemove / Keep1
FIGURE 1: MAIN DECK PASSENGER COMPARTMENT - FLOOR PANEL REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
22 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 23 (OCR)

BOEING SERVICE BULLETIN 747-21A2571
ALERT  ALERT
STA
1319
STA  STA
1209  1319
- BL
FWD
2454037
FIGURE 2: MAIN DECK PASSENGER COMPARTMENT - FLOOR PANEL REMOVAL
(SHEET 1 OF 2)
Original Issue: December 04, 2015
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-21A2571
Work - See page 1 for details.  23 of 46

### Page 24

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
Refer to 747-8 AMM
53-21-02 as an ac-
cepted procedure.
1241 EEFFLOOR PANELRemove / Keep1
FIGURE 2: MAIN DECK PASSENGER COMPARTMENT - FLOOR PANEL REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
24 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 25 (OCR)

BOEING SERVICE BULLETIN 747-21A2571
ALERT  ALERT
STA
1241
STA
1241  LBL
33.99
OCCUPANT
BACKUP AIR
SUPPLY DUCT
OCCUPANT
BACKUP AIR  SUPPLY DUCT  ASSEMBLY  FLOOR  BEAM
CLAMP
INBD  A-A  2451324
FIGURE 3: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - CLAMP
DETAILED INSPECTION
(SHEET 1 OF 2)
Original Issue: December 04, 2015
Export Controlled ECCN: 9E991 - BOEING  747-21A2571
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  25 of 46

### Page 26

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1NAS1922-0575-3CLAMPInspect1
(a) Do a detailed inspection of the clamp to find if the clamp is located correctly. The correct location of the
clamp is shown in View A.
FIGURE 3: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - CLAMP
DETAILED INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
26 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 27 (OCR)

BOEING SERVICE BULLETIN 747-21A2571
ALERT  ALERT
STA
1241
STA
1241  LBL
33.99
OCCUPANT
BACKUP AIR
SUPPLY DUCT
OCCUPANT
BACKUP AIR  FLOOR
SUPPLY DUCT  BEAM
ASSEMBLY
FLEX HOSE
INBD  A-A  2455378
FIGURE 4: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - CLAMP
TORQUE CHECK
(SHEET 1 OF 2)
Original Issue: December 04, 2015
Export Controlled ECCN: 9E991 - BOEING  747-21A2571
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  27 of 46

### Page 28

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
Do a check of the
clamp torque. The
correct torque is 13
to 17 Inch-Pounds.
--CLAMP TORQUETorque1
FIGURE 4: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - CLAMP
TORQUE CHECK
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
28 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 29 (OCR)

BOEING SERVICE BULLETIN 747-21A2571
ALERT  ALERT
STA
1241
STA
1241  LBL
33.99
OCCUPANT
BACKUP AIR
SUPPLY DUCT
OCCUPANT
BACKUP AIR  FLOOR
SUPPLY DUCT  BEAM  ASSEMBLY
FLEX HOSE
INBD  A-A  2455383
FIGURE 5: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - CORRECT
CLAMP TORQUE APPLICATION
(SHEET 1 OF 2)
Original Issue: December 04, 2015
Export Controlled ECCN: 9E991 - BOEING  747-21A2571
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  29 of 46

### Page 30

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
13 to 17 Inch-
Pounds.
1NAS1922-0575-3CLAMPTorque1
FIGURE 5: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - CORRECT
CLAMP TORQUE APPLICATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
30 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 31 (OCR)

BOEING SERVICE BULLETIN 747-21A2571
ALERT  ALERT
STA
1241
STA
1241  LBL
33.99
OCCUPANT
BACKUP AIR
I SUPPLY DUCT
FLOOR
BEAM
ASSEMBLY
EXAMPLE ONLY, FLEX HOSE  2451358
SHOWN DISCONNECTED
FIGURE 6: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - FLEX HOSE
GENERAL VISUAL INSPECTION
(SHEET 1 OF 2)
Original Issue: December 04, 2015
Export Controlled ECCN: 9E991 - BOEING  747-21A2571
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  31 of 46

### Page 32

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
Do a general visual
inspection of the flex
hose for damage.
Examples of typical
damage are holes or
tears in the flex
hose.
1BACD40V2220-0142FLEX HOSEInspect1
FIGURE 6: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - FLEX HOSE
GENERAL VISUAL INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
32 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 33 (OCR)

BOEING SERVICE BULLETIN 747-21A2571
ALERT  ALERT
STA
1241
STAT  LBL
33.99
OCCUPANT
BACKUP AIR
SUPPLY DUCT
FLOOR
BEAM
ASSEMBLY
2451398
FIGURE 7: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - FLEX HOSE
REPLACEMENT
(SHEET 1 OF 4)
Original Issue: December 04, 2015
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-21A2571
Work - See page 1 for details.  33 of 46

### Page 34 (OCR)

BOEING SERVICE BULLETIN 747-21A2571
ALERT  ALERT
LBL
33.99
FLOOR
BEAM
ASSEMBLY
OCCUPANT
(3)  BACKUP AIR
SUPPLY DUCT
LBL
33.99
OCCUPANT
BACKUP AIR  FLOOR
SUPPLY DUCT  BEAM
'ASSEMBLY
NBD
BEFORE
EXAMPLE ONLY, FLEX HOSE
SHOWN DISCONNECTED
A-A
OCCUPANT
BACKUP AIR  OCCUPANT  BACKUP AIR  SUPPLY DUCT
SUPPLY DUCT
NBD
AFTER  2452834
A-A
FIGURE 7: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - FLEX HOSE
REPLACEMENT
(SHEET 2 OF 4)
Original Issue: December 04, 2015
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-21A2571
Work - See page 1 for details.  34 of 46

### Page 35

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
-1NAS1922-0575-3CLAMPRemove / Keep1
-1BACS38K6STRAPRemove2
-1NAS1922-0525-3CLAMPRemove / Keep3
-1BACD40V2220-0142FLEX HOSERemove4
FIGURE 7: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - FLEX HOSE
REPLACEMENT
(SHEET 3 OF 4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
35 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 36

More DataQtyIdentificationNameTaskStep
Apply 3 layers of
protective tape
around the flex
hose, 3 inch wide, to
give maximum pro-
tection to the flex
hose from where it
goes through the
structure. See AP-
PENDIX B.
-NITTO P-422PROTECTIVE TAPEApply5
-1BACD40V2220-0142FLEX HOSEInstall (New)6
Install at the out-
board end of the flex
hose. The correct
clamp location is
shown in View A.
1NAS1922-0525-3CLAMPInstall (Kept)7
13 to 17 Inch-
Pounds.
1NAS1922-0525-3CLAMPTorque
Install at the inboard
end of the flex hose.
The correct clamp
location is shown in
View A.
1NAS1922-0575-3CLAMPInstall (Kept)8
13 to 17 Inch-
Pounds.
1NAS1922-0575-3CLAMPTorque
Hand tighten strap.
Do not deform flex
hose.
1BACS38K6STRAPInstall (New)9
FIGURE 7: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY - FLEX HOSE
REPLACEMENT
(SHEET 4 OF 4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
36 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 37 (OCR)

BOEING SERVICE BULLETIN 747-21A2571
ALERT  ALERT
STA
1241
STAT  LBL
33.99
OCCUPANT
BACKUP AIR
SUPPLY DUCT
FLOOR
BEAM
ASSEMBLY
2451607
FIGURE 8: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY -
INSTALLATION CORRECTION
(SHEET 1 OF 3)
Original Issue: December 04, 2015
Export Controlled ECCN: 9E991 - BOEING  747-21A2571
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  37 of 46

### Page 38 (OCR)

BOEING SERVICE BULLETIN 747-21A2571
ALERT  ALERT
LBL
33.99
FLOOR
BEAM
ASSEMBLY
OCCUPANT
BACKUP AIR
SUPPLY DUCT
LBL
33.99
OCCUPANT
BACKUP AIR
SUPPLY DUCT  FLOOR
BEAM
NBD  ASSEMBLY
BEFORE
EXAMPLE ONLY, FLEX HOSE  OCCUPANT
SHOWN DISCONNECTED  BACKUP AIR
SUPPLY DUCT
A-A
OCCUPANT
BACKUP AIR
SUPPLY DUCT
INBD
AFTER  2451609
A-A
FIGURE 8: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY -
INSTALLATION CORRECTION
(SHEET 2 OF 3)
Original Issue: December 04, 2015
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-21A2571
Work - See page 1 for details.  38 of 46

### Page 39

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
If the flex hose is
disconnected, put
the flex hose on the
occupant backup air
supply duct.
1BACD40V2220-0142FLEX HOSEPut1
The correct clamp
location is shown in
View A.
1NAS1922-0575-3CLAMPInstall (Kept)2
13 to 17 Inch-
Pounds.
1NAS1922-0575-3CLAMPTorque
FIGURE 8: MAIN DECK PASSENGER COMPARTMENT - OCCUPANT BACKUP AIR SUPPLY -
INSTALLATION CORRECTION
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
39 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 40 (OCR)

BOEING SERVICE BULLETIN 747-21A2571
ALERT  ALERT
STA
1319
STA  STA
1209  1319
FWD
2451610
FIGURE 9: MAIN DECK PASSENGER COMPARTMENT - FLOOR PANEL INSTALLATION
(SHEET 1 OF 2)
Original Issue: December 04, 2015
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  90 10 0t

### Page 41

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
Refer to 747-8 AMM
53-21-02 as an ac-
cepted procedure.
1241 JJFFLOOR PANELInstall (Kept)1
FIGURE 9: MAIN DECK PASSENGER COMPARTMENT - FLOOR PANEL INSTALLATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
41 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 42 (OCR)

BOEING SERVICE BULLETIN 747-21A2571
ALERT  ALERT
STA
1319
STA  STA
1209  1319
— BL
-WD
2454038
FIGURE 10: MAIN DECK PASSENGER COMPARTMENT - FLOOR PANEL INSTALLATION
(SHEET 1 OF 2)
Original Issue: December 04, 2015
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-21A2571
Work - See page 1 for details.  42 of 46

### Page 43

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
Refer to 747-8 AMM
53-21-02 as an ac-
cepted procedure.
1241 EEFFLOOR PANELInstall (Kept)1
FIGURE 10: MAIN DECK PASSENGER COMPARTMENT - FLOOR PANEL INSTALLATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
43 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 44

Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
CLAMP DETAILED INSPECTION.PART 1
CLAMP TORQUE CHECK.PART 2
CORRECT CLAMP TORQUE APPLICATION.PART 3
FLEX HOSE GENERAL VISUAL INSPECTION.PART 4
FLEX HOSE REPLACEMENT.PART 5
INSTALLATION CORRECTION.PART 6
CLAMP LOCATED CORRECTLY.CONDITION 1
CLAMP TORQUE IS NOT 13 TO 17 INCH-POUNDS.CONDITION 2
CLAMP TORQUE IS 13 TO 17 INCH-POUNDS.CONDITION 3
CLAMP LOCATED INCORRECTLY.CONDITION 4
FLEX HOSE HAS DAMAGE.CONDITION 5
FLEX HOSE HAS NO DAMAGE.CONDITION 6
APPENDIX A:  LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: OCCUPANT BACKUP
AIR SUPPLY - CLAMP AND FLEX HOSE INSPECTIONS
(SHEET 1 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
44 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

### Page 45 (OCR)

BOEING SERVICE BULLETIN 747-21A2571
ALERT  ALERT
WITHIN 36 MONTHS AFTER THE
ORIGINAL ISSUE DATE OF THIS
SERVICE BULLETIN
DO PART 1
CONDITION 1  CONDITION 4
BEFORE  BEFORE
FURTHER FLIGHT  FURTHER FLIGHT
DO PART 2  DO PART 4
CONDITION 2  CONDITION 3  CONDITION 5  CONDITION 6
BEFORE  BEFORE  BEFORE
FURTHER FLIGHT  FURTHER FLIGHT  FURTHER FLIGHT
NO FURTHER
DO PART 3  ACTION IS  DO PART 5  DO PART 6
NECESSARY
2454091
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1: OCCUPANT BACKUP
AIR SUPPLY - CLAMP AND FLEX HOSE INSPECTIONS
(SHEET 2 OF 2)
Original Issue: December 04, 2015
Export Controlled ECCN: 9E991 - BOEING  747-21A2571
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  45 of 46

### Page 46

NOTE: THE PROCESS INFORMATION THAT IS SUPPLIED WITH THIS SERVICE BULLETIN IS IN
SHORTENED FORM AND WAS UP-TO-DATE WHEN THIS SERVICE BULLETIN WAS PREPARED.
THIS PROCESS INFORMATION SUPPLIED WILL NOT BE KEPT UP-TO-DATE. FOR MORE
INFORMATION, REFER TO THE APPLICABLE BAC PROCESS AND MATERIALS SPECIFICATIONS:
APPLICATION OF PRESSURE SENSITIVE TAPE (BAC 5801).
SURFACE PREPARATION
1. Clean surfaces to which tape is to be applied. Refer to SOPM 20-30-03 as an accepted procedure.
Use of Citra-Safe is not permitted. Do not soil this cleaned surface prior to applying tape.
2. Do not allow these solvents to contact plastics, control cables, lubricated areas, plastic decals, or paints
or markings that are non-Skydrol-resistant.
3. Where adhesive has been applied (SOPM 20-50-12, Type 72), eliminate solvent cleaning prior to tape
installation.
OTHER TAPE TO MISCELLANEOUS SURFACES
1. Apply the tape to the area specified.
2. Position the tape and carefully press into place. Adhere the tape securely by exerting pressure with
the fingers or a roller or a polyethylene sweep.
3. Exercise care in putting the tape down so that the adhesive surface does not come in contact with
objects or areas other than those for which it is intended.
APPENDIX B:  PRESSURE SENSITIVE TAPE INSTALLATION (BAC 5801)
(SHEET 1 OF 1)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 04, 2015
747-21A2571
46 of 46
BOEING SERVICE BULLETIN 747-21A2571
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
