# Boeing Alert Service Bulletin 747-27A2506: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2014-0926; AD 2015-14-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 747-27A2506](https://openairdocs.org/service-documents/boeing/747-27a2506.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin - 747-27A2506 Revision 00
- Pages: 18
- PDF: https://openairdocs.org/files/sha256/10/89/10896d311f0c1c4b8bd1ddf5e544b041395b27ad46f724e449567006dbb000cd
- Page: https://openairdocs.org/service-documents/boeing/747-27a2506/file/10896d311f0c

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
747
Service Bulletin
ALERT
Number: 747-27A2506
Original Issue: February 03, 2014
ATA System: 2709
SUBJECT: FLIGHT CONTROLS - Flight Controls Electronics - Lateral Control Electronic Module
Replacement
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2014 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: February 03, 2014
747-27A2506
1 of 18
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
2 of 18
BOEING SERVICE BULLETIN 747-27A2506
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A. Effectivity ................................................ 9
1. Airplanes ............................................. 9
2. Spares Affected ........................................ 1 0
B. Concurrent Requirements ...................................... 1 0
C. Reason ................................................ 1 0
D. Description .............................................. 1 1
E. Compliance .............................................. 1 1
F. Approval ............................................... 1 1
G. Manpower .............................................. 1 2
H. Weight and Balance Changes .................................... 1 2
I. Electrical Load Data ......................................... 1 2
J. References .............................................. 1 2
1. Existing Data: ......................................... 1 2
2. Data Supplied with this Service Bulletin: ........................... 1 3
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 1 3
K. Publications Affected ........................................ 1 3
L. Interchangeability and Intermixability of Parts ........................... 1 3
M. Software Accomplishment Summary ................................ 1 3
2. MATERIAL INFORMATION ........................................ 1 5
A. Material - Price and Availability ................................... 1 5
B. Industry Support Information .................................... 1 5
C. Parts Necessary for Each Airplane ................................. 1 5
1. Kits/Parts ............................................ 1 5
2. Parts and Materials Supplied by the Operator ........................ 1 5
3. Parts Modified and Reidentified ................................ 1 5
4. Parts Removed and Not Replaced .............................. 1 6
D. Parts Necessary to Change Spares ................................. 1 6
E. Special Tooling - Price and Availability ............................... 1 6
F. Special Tooling Necessary to do this Service Bulletin ....................... 1 6
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 1 7
A. GENERAL INFORMATION ..................................... 1 7
B. WORK INSTRUCTIONS ....................................... 1 8
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
3 of 18
BOEING SERVICE BULLETIN 747-27A2506
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
4 of 18
BOEING SERVICE BULLETIN 747-27A2506
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
747
Service Bulletin
ALERT
SummaryNumber: 747-27A2506Original Issue: February 03, 2014
ATA System: 2709
SUBJECT: FLIGHT CONTROLS - Flight Controls Electronics - Lateral Control Electronic Module
Replacement
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin provides instructions to replace the existing Lateral Control Electronic (LCE) modules with
new LCE modules with revised software. There are two (2) LCE modules that each operate six (6) spoiler Power
Control Units (PCUs) and two (2) outboard aileron PCUs. If the existing LCE modules are not replaced, there
is a possibility for divergent flutter or unacceptable vibration for certain parts of the flight envelope. Divergent
flutter could result in loss of controllability of the airplane.
Boeing observed an airplane had experienced a large 2.3 Hertz (Hz) vibration during a steady turn at 1.8 g-force
(g) load factor during developmental flight testing. Boeing determined that the solution to this problem should
be extended to all 747-8 and 747-8F airplanes. No operators have reported any divergent flutter or unacceptable
vibration in service.
The existing LCE modules have a control system architecture that allows symmetric outboard spoiler (positions
1 or 2 and 11 or 12) deflections more than six (6) degrees. Deflections above six (6) degrees can adversely
affect the airplane flutter stability during high g maneuvers in certain parts of the flight envelope.
The new LCE modules have a control system architecture that will limit the symmetric outboard spoiler deflections
to six (6) degrees. Additional changes were made to increase the LCE module's capabilities and decrease
nuisance messages during electrical power transitions.
Boeing Service Related Problem (SRP) 747-8-SRP-27-0234 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 747 FTD 27-13008 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
5 of 18

### Page 6

ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedYesSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION (PRR 86601-2)
1. Open access to the Main Equipment Center (MEC).
2. Remove the two (2) LCE modules.
3. Adjust the polarization post of the electrical connectors on the E1-2 and E2-2 shelves.
4. Change the part number on each changed electrical connector.
5. Install the new LCE modules, part number CA49253-003.
6. Do the LCE module operational test.
7. Close access to the MEC.
8. Put the airplane back to a serviceable condition.
EFFECTIVITY
747-8 and 747-8F Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the change given in this service bulletin be done within 12 months after the original
issue date of this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
6 of 18
BOEING SERVICE BULLETIN 747-27A2506
ALERTALERT

### Page 7

INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of July 11, 2011. Please refer to Paragraph
2.B., Industry Support Information. The warranty remedies will expire eight years from the original issue date of
this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
7 of 18
BOEING SERVICE BULLETIN 747-27A2506
ALERTALERT

### Page 8

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
8 of 18
BOEING SERVICE BULLETIN 747-27A2506
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
747
Service Bulletin
ALERT
Number: 747-27A2506
Original Issue: February 03, 2014
ATA System: 2709
SUBJECT: FLIGHT CONTROLS - Flight Controls Electronics - Lateral Control Electronic Module
Replacement
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is for the airplane(s) shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR 86601-2 for data about this change.
Refer to Service Bulletin Index D6-30300 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
NOTE: Variable numbers for airplanes scheduled to be delivered more than a year after the
Original Issue date of this service bulletin are not listed in the table below. MyBoeingFleet
(MBF) will show current listing of the affected airplanes.
NOTE: This service bulletin is for the airplanes shown in the effectivity list below. The effectivity
list includes all affected airplanes scheduled to be delivered before DEC 02, 2014. In
addition, at least one airplane scheduled to be delivered after DEC 02, 2014 is affected
by this service bulletin and is in Group(s) 1 as described in the Group Configuration table.
Affected airplanes will be added to the service bulletin's MyBoeingFleet.com (MBF) "get
effectivity" result when they are added to the MBF Fleet Profile Page.
DESCRIPTIONCONFIGURATIONGROUP
747-8 and 747-8F airplanes, lines numbers 1420 through 1434, and
1436 through 1491
-1
Airplane Models:
747-8, 747-8F
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
9 of 18

### Page 10

GroupVariable Number
1RC001 - RC008
1RC022 - RC030
1RC501 - RC511
1RC521 - RC528
1RC541
1RC546 - RC549
1RC551 - RC563
1RC571 - RC572
1RC574 - RC582
1RC601 - RC605
2. Spares Affected
Examine your spares supply for the parts or components identified below. If any parts or components
are found, refer to Paragraph 2.C.2., Parts and Materials Supplied by the Operator, for the
recommended action.
Part Number
CA49253-001
CA49253-002
B. Concurrent Requirements
None.
C. Reason
This service bulletin provides instructions to replace the existing Lateral Control Electronic (LCE)
modules with new LCE modules with revised software. There are two (2) LCE modules that each
operate six (6) spoiler Power Control Units (PCUs) and two (2) outboard aileron PCUs. If the existing
LCE modules are not replaced, there is a possibility for divergent flutter or unacceptable vibration for
certain parts of the flight envelope. Divergent flutter could result in loss of controllability of the airplane.
Boeing observed an airplane had experienced a large 2.3 Hertz (Hz) vibration during a steady turn at
1.8 g-force (g) load factor during developmental flight testing. Boeing determined that the solution to
this problem should be extended to all 747-8 and 747-8F airplanes. No operators have reported any
divergent flutter or unacceptable vibration in service.
The existing LCE modules have a control system architecture that allows symmetric outboard spoiler
(positions 1 or 2 and 11 or 12) deflections more than six (6) degrees. Deflections above six (6) degrees
can adversely affect the airplane flutter stability during high g maneuvers in certain parts of the flight
envelope.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
10 of 18
BOEING SERVICE BULLETIN 747-27A2506
ALERTALERT

### Page 11

The new LCE modules have a control system architecture that will limit the symmetric outboard spoiler
deflections to six (6) degrees. Additional changes were made to increase the LCE module's capabilities
and decrease nuisance messages during electrical power transitions.
Boeing Service Related Problem (SRP) 747-8-SRP-27-0234 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 747 FTD 27-13008 is related to this service bulletin.
D. Description
1. Open access to the Main Equipment Center (MEC).
2. Remove the two (2) LCE modules.
3. Adjust the polarization post of the electrical connectors on the E1-2 and E2-2 shelves.
4. Change the part number on each changed electrical connector.
5. Install the new LCE modules, part number CA49253-003.
6. Do the LCE module operational test.
7. Close access to the MEC.
8. Put the airplane back to a serviceable condition.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
117, 118747-8, 747-8F
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the replacement given in this service bulletin be done within 12 months after
the original issue date of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
11 of 18
BOEING SERVICE BULLETIN 747-27A2506
ALERTALERT

### Page 12

If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
0.500.501Install
1.001.001Close Access
1.251.251Test
3.753.75TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR 86601-2
b. Boeing Service Related Problem (SRP) 747-8-SRP-27-0234
c. Service Bulletin Index D6-30300
d. Standard Wiring Practices Manual (SWPM) 20-71-14
e. 747 Fleet Team Digest (FTD) 27-13008
f. 747-8 Aircraft Maintenance Manual (AMM) 27-09-01
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
12 of 18
BOEING SERVICE BULLETIN 747-27A2506
ALERTALERT

### Page 13

g. Moog Service Bulletin CA49253-27-02
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
EQUIPMENT INSTL - E1/E2 RACK, ELEX EQUIP CTR284U1800
The table above lists applicable drawings used to prepare this service bulletin. The drawings are
not necessary to make the specified changes, and are not supplied with this service bulletin. The
drawings may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
27-09747 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability
information.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
13 of 18
BOEING SERVICE BULLETIN 747-27A2506
ALERTALERT

### Page 14

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
14 of 18
BOEING SERVICE BULLETIN 747-27A2506
ALERTALERT
BLANK PAGE

### Page 15

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane. As an alternative, operators can purchase the parts from Boeing Spares. This service bulletin
does not show the Boeing price and supply data.
B. Industry Support Information
Boeing warranty remedies are available for 747 airplanes in warranty as of July 11, 2011. For task hour
and material reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing
Warranty & Product Assurance Contracts. The warranty remedies will expire eight years from the
original issue date of this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
The following parts or materials are necessary to do the change in this service bulletin. Parts and
materials in the manuals given in Paragraph 1.J., References, can also be necessary. Examine
operator part and material supply to make sure all necessary parts and materials are available.
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b) (c) (d)CA49253-002 or CA49253-001Lateral Control Electronic (LCE)
Module
2CA49253-003
(a) Moog SB CA49253-27-02 provides instructions to change the existing LCE module to the new LCE
module.
(b) This part is used in production.
(c) You cannot use the existing part to replace the new or changed part.
(d) Moog Aircraft Group (CAGE Code 0ZWK8), Seneca & Jamison Roads, Plant 24, East Aurora NY 14052
USA
3. Parts Modified and Reidentified
NotesNew Part NumberNameQTYExisting Part Number
(a) (b) (c)BACC66H33F42AA01Electrical Connector2BACC66H33F38AA01
(a) Make the change in accordance with this service bulletin.
(b) This is the part number after the change is done in accordance with this service bulletin.
(c) This part is used in production.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
15 of 18
BOEING SERVICE BULLETIN 747-27A2506
ALERTALERT

### Page 16

4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
16 of 18
BOEING SERVICE BULLETIN 747-27A2506
ALERTALERT

### Page 17

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 747 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 747
Airplane Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 747
Airplane Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
5. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
6. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
7. This service bulletin includes functional test procedures for the systems changed by
this service bulletin. More functional tests can possibly be necessary in accordance
with standard maintenance practices because of interruption to other airplane systems.
8. If shading is used, shaded areas in Figures are to separate the non-critical and
non-authoritative information from the critical and authoritative information.
9. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
17 of 18
BOEING SERVICE BULLETIN 747-27A2506
ALERTALERT

### Page 18

10. Some steps in the Work Instructions are identified as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
identified as RC must be done to comply with the AD. Alternative procedures for
steps not identified with RC can be used if the RC steps can still be done as specified,
and the airplane can be put back in a serviceable condition. An Alternative Method
of Compliance (AMOC) is not necessary for deviations to steps that are not identified
as RC.
B. WORK INSTRUCTIONS
1. Open access to the E1-2 and E2-2 shelves in the Main Equipment Center (MEC).
2. RC - Remove the two (2) Lateral Control Electronic (LCE) modules from the E1-2 and E2-2 shelves
in the MEC. Refer to 747-8 AMM 27-09-01 as an accepted procedure.
NOTE: The equipment number locations on the shelves are M14704 (E1-2) located on the left
side and M14703 (E2-2) located on the right side.
3. RC - On the E1-2 and E2-2 shelves, adjust the polarization post on the electrical connectors to
Polarization Code 42. Refer to SWPM 20-71-14 as an accepted procedure.
NOTE: Once this step is completed, only LCE module part number CA49253-003 can be installed
on the E1-2 and E2-2 shelves.
4. Change the part number of each electrical connector to BACC66H33F42AA01. Refer to SWPM
20-71-14 as an accepted procedure.
5. RC - Install two (2) new LCE modules, part number CA49253-003, on the E1-2 and E2-2 shelves
in the MEC. Refer to 747-8 AMM 27-09-01 as an accepted procedure.
6. RC - Do an operational test of the LCE modules. Refer to 747-8 AMM 27-09-01 as an accepted
procedure.
7. Close access to the E1-2 and E2-2 shelves in the MEC.
8. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 03, 2014
747-27A2506
18 of 18
BOEING SERVICE BULLETIN 747-27A2506
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
