# Boeing Alert Requirements Bulletin 747-31A2565 RB: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2021-0957; AD 2022-07-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Requirements Bulletin 747-31A2565 RB](https://openairdocs.org/service-documents/boeing/747-31a2565-rb.md)
- Title as filed: 747-31A2565 RB R01
- Pages: 15
- PDF: https://openairdocs.org/files/sha256/ea/08/ea082d977238cca71e87beea45f135b09ab633a47bacd007b351d05225ecb111
- Page: https://openairdocs.org/service-documents/boeing/747-31a2565-rb/file/ea082d977238

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
747
Requirements Bulletin
ALERT
Number: 747-31A2565 RB
Original Issue: April 27, 2021
Revision 1: September 14, 2021
ATA System: 3161
SUBJECT: INDICATING/RECORDING SYSTEMS - Integrated Display System - Electronic Flight
Information System / Engine Indication and Crew Alerting System Interface Unit
Inspection
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
Copyright © 2021 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: April 27, 2021
747-31A2565 RBRevision 1: September 14, 2021
1 of 15
3.0

### Page 2

Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 27, 2021
747-31A2565 RBRevision 1: September 14, 2021
2 of 15
REQUIREMENTS BULLETIN 747-31A2565
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
A. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
B. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
A. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
B. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
FIGURE 1: E2-6 ELECTRONICS SHELF - ELECTRONIC FLIGHT INSTRUMENT SYSTEM / ENGINE
INDICATION AND CREW ALERTING SYSTEM INTERFACE UNIT - INSPECTION . . . . 14
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 27, 2021
747-31A2565 RBRevision 1: September 14, 2021
3 of 15
REQUIREMENTS BULLETIN 747-31A2565
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 27, 2021
747-31A2565 RBRevision 1: September 14, 2021
4 of 15
REQUIREMENTS BULLETIN 747-31A2565
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
747
Requirements Bulletin
ALERT
Revision Transmittal SheetNumber: 747-31A2565 RBOriginal Issue: April 27, 2021
Revision 1: September 14, 2021
ATA System: 3161
SUBJECT: INDICATING/RECORDING SYSTEMS - Integrated Display System - Electronic Flight
Information System / Engine Indication and Crew Alerting System Interface Unit
Inspection
This revision includes all pages of the requirements bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements
Bulletin 747-31A2565 RB. The Airworthiness Directive will make the compliance tasks and times given in
Requirements Bulletin 747-31A2565 RB mandatory.
Effects of this Revision on airplanes on which Original Issue was previously done:
None.
REASON FOR REVISION
This revision is sent to inform operators about airplanes with affected Electronic Flight Instrument System (EFIS)
/ Engine Indication and Crew Alerting System (EICAS) Interface Unit (EIU). If the EIU is found with an affected
serial number marked MODS letter B or an EIU with unaffected serial number on the modification plate, it is
defined as a good part. Therefore, no action is required. However, if the EIU affected serial number is found
without marked MODS letter B, replace the EIU with the affected serial number with an EIU marked with MODS
letter B or with an EIU unaffected serial number.
These sections were changed:
– In Compliance, changed text.
– In Work Instructions, changed text.
REVISION HISTORY
Service BulletinService BulletinRequirement BulletinRequirement Bulletin
747-31A2565747-31A2565747-31A2565 RB747-31A2565 RB
Issue DateIssue Date
April 27, 2021Original Issue:April 27, 2021Original Issue:
September 14, 2021Revision 1:September 14, 2021Revision 1:
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 27, 2021
747-31A2565 RBRevision 1: September 14, 2021
5 of 15

### Page 6

Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 27, 2021
747-31A2565 RBRevision 1: September 14, 2021
6 of 15
REQUIREMENTS BULLETIN 747-31A2565
ALERTALERT
BLANK PAGE

### Page 7

Commercial 
Airplanes
747
Requirements Bulletin
ALERT
Number: 747-31A2565 RB
Original Issue: April 27, 2021
Revision 1: September 14, 2021
ATA System: 3161
SUBJECT: INDICATING/RECORDING SYSTEMS - Integrated Display System - Electronic Flight
Information System / Engine Indication and Crew Alerting System Interface Unit
Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING
PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN
(RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL
TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB
WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
1. Effectivity
A. Airplanes
This bulletin is applicable to 747-8, 747-8F Airplane(s), line number(s) 1420-99999 in 1 Group(s).
Where the effectivity is presented with hyphens between line numbers, the airplane applicability
means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group Information for the applicable airplanes is given below.
NOTE: The Variable Number table below includes all affected airplanes up to Line Number 1573.
Affected airplanes after Line Number 1573 will be added to the service bulletin's
MyBoeingFleet.com (MBF) "get effectivity" result when they are added to the MBF Fleet
Profile Page.
DESCRIPTIONCONFIGURATIONGROUP
Airplanes that can have Electronic Flight Instrument System
(EFIS)/Engine Indication and Crew Alerting System (EICAS) Interface
Units (EIUs) with hand brushed conformal coating on the Aeronautical
Radio, Incorporated (ARINC) Input/Output (I/O) card.
-1
Airplane Models:
747-8, 747-8F
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 27, 2021
747-31A2565 RBRevision 1: September 14, 2021
7 of 15

### Page 8

GroupVariable Number
1RC001 - RC009
1RC021 - RC040
1RC051 - RC060
1RC066 - RC072
1RC076 - RC077
1RC501 - RC514
GroupVariable Number
1RC521 - RC528
1RC531 - RC541
1RC546 - RC566
1RC571 - RC582
1RC601 - RC610
1RC641 - RC644
GroupVariable Number
1RC651 - RC652
1RC661
1RC671 - RC674
1RC681 - RC696
1RC701 - RC703
--
B. Spares Affected
Refer to Parts and Materials Supplied by the Operator for the recommended actions.
2. CONCURRENT REQUIREMENTS
None.
3. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
Requirements Bulletin 747-31A2565 RB. The Airworthiness Directive will make the compliance tasks and
times given in Requirements Bulletin 747-31A2565 RB mandatory.
Accomplish the required action(s), based on the applicable condition(s) in Table 1, in accordance with
ACCOMPLISHMENT INSTRUCTIONS.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Table 1: Electronic Flight Instrument System / Engine Indication and Crew Alerting System Interface
Unit Serial Number Inspection
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 24 months after
the Original Issue date
of Requirements Bul-
letin 747-31A2565 RB
or within 24 months af-
ter the date of issuance
of the original standard
certificate of airworthi-
ness or the original ex-
port certificate of airwor-
thiness, whichever oc-
curs later.
Option 1: Do a maintenance
records check of the left, cen-
ter, and right EIUs for the af-
fected serial number.
All Airplanes
Option 2: Do an inspection of
the left, center, and right EIUs
for the affected serial number.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 27, 2021
747-31A2565 RBRevision 1: September 14, 2021
8 of 15
REQUIREMENTS BULLETIN 747-31A2565
ALERTALERT

### Page 9

Table 1: Electronic Flight Instrument System / Engine Indication and Crew Alerting System Interface
Unit Serial Number Inspection
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
--No further action is required.CONDITION 1:
NO AFFECTED SERI-
AL NUMBER OR AF-
FECTED SERIAL
NUMBER MARKED
WITH MODS LETTER
B ON THE MODIFICA-
TION PLATE FOUND
AT LEFT, CENTER,
AND RIGHT EIUs
-Within 24 months after
the Original Issue date
of Requirements Bul-
letin 747-31A2565 RB
or within 24 months af-
ter the date of issuance
of the original standard
certificate of airworthi-
ness or the original ex-
port certificate of airwor-
thiness, whichever oc-
curs later.
Replace the left EIU with an
unaffected serial number or
with an affected serial number
marked MODS letter B on the
modification plate.
CONDITION 2:
ANY AFFECTED SERI-
AL NUMBER WITH-
OUT MARKED MODS
LETTER B ON THE
MODIFICATION
PLATE FOUND AT
THE LEFT EIU
-Replace the center EIU with
an unaffected serial number
or with an affected serial
number marked MODS letter
B on the modification plate.
CONDITION 3:
ANY AFFECTED SERI-
AL NUMBER  WITH-
OUT MARKED MODS
LETTER B ON THE
MODIFICATION
PLATE FOUND AT
THE CENTER EIU
-Replace the right EIU with an
unaffected serial number or
with an affected serial number
marked MODS letter B on the
modification plate.
CONDITION 4:
ANY AFFECTED SERI-
AL NUMBER WITH-
OUT MARKED MODS
LETTER B ON THE
MODIFICATION
PLATE FOUND AT
THE RIGHT EIU
4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 27, 2021
747-31A2565 RBRevision 1: September 14, 2021
9 of 15
REQUIREMENTS BULLETIN 747-31A2565
ALERTALERT

### Page 10

If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 27, 2021
747-31A2565 RBRevision 1: September 14, 2021
10 of 15
REQUIREMENTS BULLETIN 747-31A2565
ALERTALERT

### Page 11

5.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF
METAL PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE
BUNDLES CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES
CAN CAUSE SPARKS OR OTHER ELECTRICAL DAMAGE.
CAUTION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. For the related SB, some locations are marked RC Start and RC
End to identify the requirements that are restated from the RB. For the related SB,
the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD.
Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations
to steps between RC Start and RC End, including substeps and identified figures.
For the related SB, the steps not between RC Start and RC End may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC; this is provided that the
steps between RC Start and RC End, including sub-steps and identified figures, can
still be done as specified, and the airplane can be put back in an airworthy condition.
Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 27, 2021
747-31A2565 RBRevision 1: September 14, 2021
11 of 15
REQUIREMENTS BULLETIN 747-31A2565
ALERTALERT

### Page 12

5. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
6. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
7. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION,
do all of the ACTION numbers for that CONDITION or OPTION.
B. WORK INSTRUCTIONS
Actions Required for Compliance
1. Requirements:
Table 1: Electronic Flight Instrument System / Engine Indication and Crew Alerting System Interface
Unit Serial Number Inspection
Refer to the listed proce-
dures in SB 747-31A2565
Original Issue or later
approved revisions as an
accepted procedure.
Method of Com-
pliance
ActionCondition
-FIGURE 1Option 1: Do a maintenance
records check of the left, cen-
ter, and right Electronic Flight
Instrument System (EFIS) /
Engine Indication and Crew
Alerting System (EICAS) Inter-
face Units (EIUs) for the affect-
ed serial number.
All Airplanes
PART 1: Open Access.Option 2: Do an inspection of
the left, center, and right EIUs
for the affected serial number.
PART 3: Close Access.-No further action is required.CONDITION 1:
NO AFFECTED SERI-
AL NUMBER OR AF-
FECTED SERIAL
NUMBER MARKED
WITH MODS LETTER
B ON THE MODIFICA-
TION PLATE FOUND
AT LEFT, CENTER,
AND RIGHT EIUs
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 27, 2021
747-31A2565 RBRevision 1: September 14, 2021
12 of 15
REQUIREMENTS BULLETIN 747-31A2565
ALERTALERT

### Page 13

Table 1: Electronic Flight Instrument System / Engine Indication and Crew Alerting System Interface
Unit Serial Number Inspection
Refer to the listed proce-
dures in SB 747-31A2565
Original Issue or later
approved revisions as an
accepted procedure.
Method of Com-
pliance
ActionCondition
FIGURE 2-Replace the left EIU with an
unaffected serial number or
with an affected serial number
marked MODS letter B on the
modification plate.
CONDITION 2:
ANY AFFECTED SERI-
AL NUMBER WITH-
OUT MARKED MODS
LETTER B ON THE
MODIFICATION
PLATE FOUND AT
THE LEFT EIU
PART 2: Integrated Display
System Test.
--
PART 3: Close Access.--
FIGURE 3-Replace the center EIU with
an unaffected serial number
or with an affected serial
number marked MODS letter
B on the modification plate.
CONDITION 3:
ANY AFFECTED SERI-
AL NUMBER WITH-
OUT MARKED MODS
LETTER B ON THE
MODIFICATION
PLATE FOUND AT
THE CENTER EIU
PART 2: Integrated Display
System Test.
--
PART 3: Close Access--
FIGURE 4-Replace the right EIU with an
unaffected serial number or
with an affected serial number
marked MODS letter B on the
modification plate.
CONDITION 4:
ANY AFFECTED SERI-
AL NUMBER WITH-
OUT MARKED MODS
LETTER B ON THE
MODIFICATION
PLATE FOUND AT
THE RIGHT EIU
PART 2: Integrated Display
System Test.
--
PART 3: Close Access.--
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 27, 2021
747-31A2565 RBRevision 1: September 14, 2021
13 of 15
REQUIREMENTS BULLETIN 747-31A2565
ALERTALERT

### Page 14 (OCR)

REQUIREMENTS BULLETIN 747-31A2565
ALERT  ALERT
A LEFT, CENTER  I AND RIGHT EIU
ELECTRICAL AND
ELECTRONICS COMPARTMENT
E2-6 ELECTRONICS
SHELF
FWD
IDENTIFICATION
→ PLATE
MODIFICATION
PLATE
EIU
(3 LOCATIONS)
2952096
FIGURE 1: E2-6 ELECTRONICS SHELF - ELECTRONIC FLIGHT INSTRUMENT SYSTEM / ENGINE
INDICATION AND CREW ALERTING SYSTEM INTERFACE UNIT - INSPECTION
(SHEET 1 OF 2)
Original Issue: April 27, 2021
Revision 1 September 14, 2021  Export Controlled ECCN: 9E991  Copyright © Unpublished  747-31A2565 RB
Work - See page 1 for details.  14 of 15

### Page 15

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)3822-2481-101EFIS/EICAS INTER-
FACE UNIT (EIU)
Inspect1
(a) Option 1: Do a maintenance records check of the left, center, and right EIUs for the affected serial number
listed in Table 1 or
Option 2: Do an inspection of the left, center, and right EIUs for the affected serial number listed in Table1.
Table 1
Affected Serial NumbersPart Number
175FG2, 175FGG, 175FGH, 175FGM,
175FH3,175YY1, 175YYM, 175YYN, 175YYX, 17600T,
17600X,17600Y, 1786HL, 17HL88, 17P859, 17P85D,
17P85F,17PCP4, 17PCP5, 17PCP6, 17R5DV,
17R5DX,17VNM7, 17VNPN, 17XPG9, 17XRFN,
17XRFP,17XRFR, 17XRGY, 17YX57, 17YX5L,
181MTH,181MTM, 181MTV, 181MTX, 181NRK,
181NRL,181NRP, 181NRR, 181NRT, 181NRV,
181NRY,18C1MG, 18C1NN, 18C4X3, 18C4X4,
18C4X7,18C4XC, 18C4XG, 18C4XK, 18HD1P,
18HD22,18HD2X, 18HD31, 18HG2V, 18HG2Y,
18HG32,18HG34, 18HG4N, 18TFRX, 18TFRY,
18TFT0,18TFT2, 18TFT5, 18TFTC, 18TFTK,
18TFTM,18Y5Y7, 18Y603, 18Y60F, 18Y757
822-2481-101 (a)
(a) This is the Rockwell Collins part number.
FIGURE 1: E2-6 ELECTRONICS SHELF - ELECTRONIC FLIGHT INSTRUMENT SYSTEM / ENGINE
INDICATION AND CREW ALERTING SYSTEM INTERFACE UNIT - INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 27, 2021
747-31A2565 RBRevision 1 September 14, 2021
15 of 15
REQUIREMENTS BULLETIN 747-31A2565
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
