# Boeing Alert Requirements Bulletin 747-38A2146 RB: No revision named, part 2 of 4

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-2408; AD 2025-03-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Requirements Bulletin 747-38A2146 RB](https://openairdocs.org/service-documents/boeing/747-38a2146-rb.md)
- Title as filed: 747-38A2146-00-- RB_Part2
- Pages: 39
- PDF: https://openairdocs.org/files/sha256/a7/7f/a77fa9867c1a14a44c2e7d22eb3fcacb894aa93533cd77c3b633474b7d2ec836
- Page: https://openairdocs.org/service-documents/boeing/747-38a2146-rb/file/a77fa9867c1a

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
ADDITIONAL
SUPPLY HOSE
WATER
• SUPPLY LINE
BRACKET
INBD
TYPICAL
NOTE 1:  (VIEW LOOKING AFT)
THIS ILLUSTRATION IS FOR  B-B
ILLUSTRATIVE PURPOSES. THE  3029650
CONFIGURATION ON YOUR AIRPLANE
MIGHT BE DIFFERENT THAN SHOWN.
FIGURE 13: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY INSTALLATION
(SHEET 3 OF 5)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  63 of 155

### Page 2

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
If installed on the
clamps. (a)
--STRAPRemove1
(a)--SCREWRemove / Keep
(a)--NUTRemove / Keep
(a)--WASHERRemove / Keep
(a)--CLAMPRemove / Keep
(b)1417U2603-1015ENVELOPE ASSYInstall (New)2
(c)1417U2603-1015ENVELOPE ASSYCut3
(d)-BMS 5-157, TYPE I,
CLASS 2, FORM 1,
GRADE C, COMPOSI-
TION MPEEK
TAPEApply
(a)--CLAMPInstall (Kept)4
(a)--WASHERInstall (Kept)
(a)--SCREWInstall (Kept)
(a)--NUTInstall (Kept)
If removed from the
clamps. (a)
-BACS38K2STRAPInstall (New)
(b)1417U2603-1016ENVELOPE ASSYInstall (New)5
(e)1417U2603-1015ENVELOPE ASSYAdjust6
(e)1417U2603-1016ENVELOPE ASSYAdjust
(f)-BMS 5-157, TYPE I,
CLASS 2, FORM 1,
GRADE C, COMPOSI-
TION MPEEK
TAPEApply7
(a) No part identification or quantity given. The identification or quantity of parts used can be different between
the configurations.
(b) It is permitted to locally compress the envelope assembly to make sure that it aligns better with the adjacent
surfaces or parts.
(c) Not to exceed 0.50 inch in length in any direction.
(d) Apply tape to the cut edges and/or damaged surfaces of the envelope assembly. Refer to APPENDIX A
as an accepted procedure.
(e) Make sure that all fittings and connections are completely inside the envelope assemblies.
FIGURE 13: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY INSTALLATION
(SHEET 4 OF 5)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: August 07, 2024
747-38A2146 RB
64 of 155
REQUIREMENTS BULLETIN 747-38A2146
ALERTALERT

### Page 3

More DataQtyIdentificationNameTaskStep
(f) Apply tape to the inboard and outboard sides of the mating envelope assemblies to close any gaps.
FIGURE 13: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY INSTALLATION
(SHEET 5 OF 5)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: August 07, 2024
747-38A2146 RB
65 of 155
REQUIREMENTS BULLETIN 747-38A2146
ALERTALERT

### Page 4 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
This Figure applies only to: Group 7.
STA
660 STA
560
FORWARD CARGO
COMPARTMENT
LOWER SURFACE
WATER DRAIN  OF FLOOR BEAMS
LINE
STA  STA  VIS  STA  STA  STA  STA
660  650  640  620  600  580  560
WATER DRAIN  EQUIPMENT COOLING  WATER
LINE  SUPPLY AIR INLET  SUPPLY
LINE
FWD
NOTE 1:  TYPICAL
(VIEW LOOKING OUTBOARD)
THIS ILLUSTRATION IS FOR
ILLUSTRATIVE PURPOSES. THE  A-A
CONFIGURATION ON YOUR AIRPLANE
MIGHT BE DIFFERENT THAN SHOWN.
NOTE 2:
POSITION OF THE WATER SUPPLY LINE  3029653
ON YOUR AIRPLANE MIGHT BE
DIFFERENT THAN SHOWN.
FIGURE 14: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 1 OF 7)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  66 of 155

### Page 5 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
WATER  DRAIN LINE  WATER SUPPLY LINE
END FITTING SLEEVE
1.00
(MAX)
WATER SUPPLY
LINE
WATER  D€3A€
DRAIN LINE
FWD
TYPICA
(VIEW LOOKING OUTBOARD)
WATER DRAIN LINE
1.00
(MAX)
WATER SUPPLY LINE  0030Є
END FITTING SLEEVE  WATER DRAIN LINE
FWD
TYPICAL
(VIEW LOOKING OUTBOARD)
3029654
FIGURE 14: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 2 OF 7)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  67 of 155

### Page 6 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
D
—WATER SUPPLY LINE
0.50
0.50
(MIN)  (MIN)
SLIT
0.50
(MIN)  0.50
(MIN)
TYPICAL
INBD  (STRAP NOT SHOWN)
VIEW LOOKING FORWARD
B-B
3.00  0.50  • 12.00 (MAX)  D2346
WATER SUPPLY LINE
AFT END OF
CONDUIT
TYPICAI
(VIEW LOOKING OUTBOARD)
(FORWARD END OF CONDUIT SIMILAR)  (AFT END OF CONDUIT SHOWN)  3029655
C-C
FIGURE 14: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 3 OF 7)
Original Issue: August 07, 2024
747-38A2146 RB
Export Controlled ECCN: 9E991
See page 1 for details  68 of 155

### Page 7 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
WATER SUPPLY LINE  DRAIN SLOPE  2.5°
(MIN)
• A DIP WHERE
WATER COLLECTS
FWD
0.375
(MAX)  AN EXAMPLE OF A LOCAL WATER TRAP THAT
CAN OCCUR IN THE WATER SUPPLY LINE
(CONDUITS NOT SHOWN)
(VIEW LOOKING OUTBOARD)
WATER SUPPLY LINE  D-D
WITH CONDUITS
(8) STRAP
® TAPE
TAPE ®
WATER DRAIN
LINES
STRAP 8
WATER DRAIN
LINE
® STRAP
WATER SUPPLY  (8) SPACER
LINE WITH
CONDUITS
ALTERNATIVE
(VIEW LOOKING FORWARD)
NOTE 2:  E-E  LINTER DRAIN
POSITION OF THE WATER SUPPLY LINE
ON YOUR AIRPLANE MIGHT BE
DIFFERENT THAN SHOWN.  INBD
NOTE 3:
THIS SUPPORT CONFIGURATION IS FOR  ILLUSTRATIVE PURPOSES. THE  (VIEW LOOKING FORWARD)  ALTERNATIVE
SUPPORT CONFIGURATION ON YOUR  F-F
AIRPLANE MIGHT BE DIFFERENT THAN  3029656
SHOWN OR THERE IS NO SUPPORT IN
YOUR CONFIGURATION.
FIGURE 14: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 4 OF 7)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  69 of 155

### Page 8 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
WATER SUPPLY LINE
WITH CONDUITS  WATER SUPPLY LINE
WITH CONDUITS
TAPE (8
TAPE (8  SPACER 8
WATER DRAIN  WATER DRAIN LINE
LINE
STRAP
STRAP (8)  STRAP 8
INBD  INBD
ALTERNATIVE  ALTERNATIVE
(VIEW LOOKING FORWARD)  (VIEW LOOKING FORWARD)
G-G  H-H
STANCHION  WATER DRAIN
LINE
MOUNTING
SUPPORT
WATER SUPPLY
LINE WITH
CONDUITS
L
NOTE 2:
POSITION OF THE WATER SUPPLY LINE  8) STRAP
ON YOUR AIRPLANE MIGHT BE
DIFFERENT THAN SHOWN.  WATER DRAIN
LINE
NOTE 3:  BRACKET
THIS SUPPORT CONFIGURATION IS FOR  NBD
ILLUSTRATIVE PURPOSES. THE
SUPPORT CONFIGURATION ON YOUR  ALTERNATIVE
AIRPLANE MIGHT BE DIFFERENT THAN  (VIEW LOOKING AFT)  3046316
SHOWN OR THERE IS NO SUPPORT IN
YOUR CONFIGURATION.
FIGURE 14: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 5 OF 7)
Original Issue: August 07, 2024
747-38A2146 RB
Export Controlled ECCN: 9E991
See page 1 for details  70 of 155

### Page 9

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
-1417U2912-14CONDUITPut / Hold1
-1417U2912-14CONDUITPut / Hold2
(a)2417U2912-14CONDUITMeasure3
Cut at marks.2417U2912-14CONDUITCut
-1417U2912-14CONDUITInstall (New)4
-1417U2912-14CONDUITInstall (New)5
Apply at slits.(b)-BMS5-146 TYPE 1,
CLASS 1, GRADE A,
1.50 INCH MINIMUM
WIDTH
FIBERGLASS TAPEApply6
(c)-BACS38K2STRAPInstall (New)7
Make sure conduit
assy from steps 4-7
are oriented per
view B-B. (c)(d)
-BACS38K2STRAPInstall (New)8
This part is also re-
ferred to as a 'spac-
er' and its installation
is optional. (e)
-CR4HCONNECTOR RINGInstall (New)
(f)2417U2912-14CONDUITAdjust
(g)-BMS5-146 TYPE 1,
CLASS 1, GRADE A,
1.00 INCH MINIMUM
WIDTH
FIBERGLASS TAPEApply
(f)2417U2912-14CONDUITAdjust9
(a) Mark conduits to within maximum 1.00 inch from fitting on FWD and AFT ends of the conduits. It is accept-
able for conduits to cover the flex hose end fitting sleeve.
(b) Apply tape in one continuous strip longitudinally. Tape segments can be used provided there is a minimum
of 0.50 inch overlap at all tape seams.
(c) Install strap 0.50 - 3.00 inches from both ends of the conduit. Make sure conduit is supported between
end straps a maximum of every 12.00 inches with combination of straps and any existing supports.
(d) Use straps to attach the water supply line with the conduits to the mounting supports.
(e) Use an optional spacer between the water supply line with conduits and drain line to prevent a riding
condition and water traps, and to keep a minimum 2.50 degree drain slope.
FIGURE 14: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 6 OF 7)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: August 07, 2024
747-38A2146 RB
71 of 155
REQUIREMENTS BULLETIN 747-38A2146
ALERTALERT

### Page 10

More DataQtyIdentificationNameTaskStep
(f) Make sure that the conduits are straight, keep a minimum 2.50 degree drain slope and do not have any
localized dip in the water supply line not covered by the conduits that could prevent water from draining.
Maximum allowable dip is 0.375 inch. A depth of the dip that is larger than 0.375 inches can cause a
water trap and is not permitted. Additional straps and/or supports beyond the conduit ends may be loosened
or replaced to adjust supply line. It can be necessary to remove additional sidewall liners up to STA 540
and STA 700.
(g) Apply two layers of tape around each strap. Make sure tape is centered around the strap. Tape is not
necessary at locations where the original mounting supports were kept.
FIGURE 14: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 7 OF 7)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: August 07, 2024
747-38A2146 RB
72 of 155
REQUIREMENTS BULLETIN 747-38A2146
ALERTALERT

### Page 11 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
This Figure applies only to: Group 8, 10.
STA
660 STA
580
N
FORWARD CARGO
COMPARTMENT
STA  LOWER SURFACE
660  WATER DRAIN  OF FLOOR BEAMS
STA  LINE
650  STA  STA  STA  STA
640  620  600  580
\ F
WATER  WATER DRAIN  FWD  EQUIPMENT COOLING
SUPPLY  LINE  SUPPLY AIR INLET
LINE
TYPICAL
NOTE 1:  (VIEW LOOKING OUTBOARD)
THIS ILLUSTRATION IS FOR  A-A
ILLUSTRATIVE PURPOSES. THE
CONFIGURATION ON YOUR AIRPLANE
MIGHT BE DIFFERENT THAN SHOWN.
NOTE 2:
POSITION OF THE WATER SUPPLY  3029664
LINE ON YOUR AIRPLANE MIGHT BE
DIFFERENT THAN SHOWN.
FIGURE 15: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 1 OF 7)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  73 of 155

### Page 12 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
WATER DRAIN LINE
1.00
(MAX)
WATER SUPPLY LINE  0000G
END FITTING SLEEVE
WATER DRAIN LINE
FWD
TYPICAL
(VIEW LOOKING OUTBOARD)
STA
600
WATER  DRAIN LINE  WATER SUPPLY LINE  END FITTING SLEEVE
1.00
(MAX)
WATER SUPPLY
LINE
WATER  334€
DRAIN LINE
•WD
TYPICAL
(VIEW LOOKING OUTBOARD)
3029666
FIGURE 15: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 2 OF 7)
Original Issue: August 07, 2024
747-38A2146 RB
Export Controlled ECCN: 9E991
See page 1 for details  74 of 155

### Page 13 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
- WATER SUPPLY LINE
0.50
0.50
(MIN)  (MIN)
SLIT
(MIN)  0.50  0.50
(MIN)
TYPICAL
INBD  (STRAP NOT SHOWN)
VIEW LOOKING FORWARD
B-B
3.00  0.50  12.00 (MAX)  D234€
WATER SUPPLY LINE
AFT END OF •
CONDUIT
-YPICAI
(VIEW LOOKING OUTBOARD)
(FORWARD END OF CONDUIT SIMILAR)  (AFT END OF CONDUIT SHOWN)  3029670
C-C
FIGURE 15: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 3 OF 7)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  75 of 155

### Page 14 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
WATER SUPPLY LINE  DRAIN SLOPE  2.5°
(MIN)
• A DIP WHERE
WATER COLLECTS
FWD
0.375
(MAX)  AN EXAMPLE OF A LOCAL WATER TRAP THAT
CAN OCCUR IN THE WATER SUPPLY LINE
(CONDUITS NOT SHOWN)
(VIEW LOOKING OUTBOARD)
WATER SUPPLY LINE  D-D
WITH CONDUITS
8) STRAP
8 TAPE
TAPE 8
WATER DRAIN
LINES
STRAP (8)
•WATER DRAIN
LINE
3 STRAP
WATER SUPPLY  (8) SPACER
NBD  LINE WITH
CONDUITS
ALTERNATIVE
(VIEW LOOKING FORWARD)
E-E  WATER DRAIN
NOTE 2:  LINE
POSITION OF THE WATER SUPPLY LINE
ON YOUR AIRPLANE MIGHT BE
DIFFERENT THAN SHOWN.  INBD
NOTE 3:
THIS SUPPORT CONFIGURATION IS FOR  ILLUSTRATIVE PURPOSES. THE  (VIEW LOOKING FORWARD)  ALTERNATIVE
SUPPORT CONFIGURATION ON YOUR  F-F
AIRPLANE MIGHT BE DIFFERENT THAN  3047137
SHOWN OR THERE IS NO SUPPORT IN
YOUR CONFIGURATION.
FIGURE 15: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 4 OF 7)
Original Issue: August 07, 2024
747-38A2146 RB
Export Controlled ECCN: 9E991
See page 1 for details  76 of 155

### Page 15 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
STANCHION  WATER DRAIN
LINE
MOUNTING
SUPPORT
WATER SUPPLY
LINE WITH
CONDUITS
(8) STRAP
WATER DRAIN
LINE
BRACKET
NBD
ALTERNATIVE
(VIEW LOOKING AFT)
G-G
NOTE 2:
POSITION OF THE WATER SUPPLY LINE
ON YOUR AIRPLANE MIGHT BE
DIFFERENT THAN SHOWN.
NOTE 3:
THIS SUPPORT CONFIGURATION IS FOR
ILLUSTRATIVE PURPOSES. THE
SUPPORT CONFIGURATION ON YOUR
AIRPLANE MIGHT BE DIFFERENT THAN  3046470
SHOWN OR THERE IS NO SUPPORT IN
YOUR CONFIGURATION.
FIGURE 15: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 5 OF 7)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  77 of 155

### Page 16

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
-1417U2912-14CONDUITPut / Hold1
-1417U2912-14CONDUITPut / Hold2
(a)2417U2912-14CONDUITMeasure3
Cut at marks.2417U2912-14CONDUITCut
-1417U2912-14CONDUITInstall (New)4
-1417U2912-14CONDUITInstall (New)5
Apply at slits. (b)-BMS5-146 TYPE 1,
CLASS 1, GRADE A,
1.50 INCH MINIMUM
WIDTH
FIBERGLASS TAPEApply6
(c)-BACS38K2STRAPInstall (New)7
Make sure conduit
assy from steps 4-7
are oriented per
view B-B. (c)(d)
-BACS38K2STRAPInstall (New)8
This part is also re-
ferred to as a 'spac-
er' and its installation
is optional. (e)
-CR4HCONNECTOR RINGInstall (New)
(f)2417U2912-14CONDUITAdjust
(g)-BMS5-146 TYPE 1,
CLASS 1, GRADE A,
1.00 INCH MINIMUM
WIDTH
FIBERGLASS TAPEApply
(f)2417U2912-14CONDUITAdjust9
(a) Mark conduits to within maximum 1.00 inch from fitting on FWD and AFT ends of the conduits. It is accept-
able for conduits to cover the flex hose end fitting sleeve.
(b) Apply tape in one continuous strip longitudinally. Tape segments can be used provided there is a minimum
of 0.50 inch overlap at all tape seams.
(c) Install strap 0.50 - 3.00 inches from both ends of the conduit. Make sure conduit is supported between
end straps a maximum of every 12.00 inches with combination of straps and any existing supports.
(d) Use the straps to attach the water supply line with the conduits to the adjacent water drain line, with
preference to the upper drain line. As an alternative, it is permitted to use straps to attach the water supply
line with the conduits to the mounting supports and the water drain line.
(e) Use an optional spacer between the water supply line with conduits and drain line to prevent a riding
condition and water traps, and to keep a minimum 2.50 degree drain slope.
FIGURE 15: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 6 OF 7)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: August 07, 2024
747-38A2146 RB
78 of 155
REQUIREMENTS BULLETIN 747-38A2146
ALERTALERT

### Page 17

More DataQtyIdentificationNameTaskStep
(f) Make sure that the conduits are straight, keep a minimum 2.50 degree drain slope and do not have any
localized dip in the water supply line not covered by the conduits that could prevent water from draining.
Maximum allowable dip is 0.375 inch. A depth of the dip that is larger than 0.375 inches can cause a
water trap and is not permitted. Additional straps and/or supports beyond the conduit ends may be loosened
or replaced to adjust supply line. It can be necessary to remove additional sidewall liners up to STA 540
and STA 700.
(g) Apply two layers of tape around each strap. Make sure tape is centered around the strap. Tape is not
necessary at locations where the original mounting supports were kept.
FIGURE 15: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 7 OF 7)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: August 07, 2024
747-38A2146 RB
79 of 155
REQUIREMENTS BULLETIN 747-38A2146
ALERTALERT

### Page 18 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
This Figure applies only to: Group 8.
STA
680
STA
580
-ORWARD CARG
OMPARTMEN
LOWER SURFACE  WATER SUPPLY LINE
OF FLOOR BEAMS  WITH CONDUITS
WATER DRAIN
LINE
STA  STA  STA  STA  STA  VIS  VIS
680  660  650  640  620  600  580
WATER DRAIN  EQUIPMENT COOLING
LINE  SUPPLY AIR INLET
TYPICAL
(VIEW LOOKING OUTBOARD)
NOTE 1:  A-A
THIS ILLUSTRATION IS FOR
ILLUSTRATIVE PURPOSES. THE  3029673
CONFIGURATION ON YOUR AIRPLANE
MIGHT BE DIFFERENT THAN SHOWN.
FIGURE 16: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY AND SLITTED SHIELD INSTALLATION
(SHEET 1 OF 11)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  80 of 155

### Page 19 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
STA
660
LOWER SURFACE
OF FLOOR BEAMS
B
1234  1.00  AND
(MIN)
IN-LINE  HEATER  HOUSING HEATER  IN-LINE  23  Y25  ADDITIONAL  SUPPLY  HOSE
NUT
RISER -
HC-
1.00
(MIN)
AFT END OF  WATER
CONDUITS  SUPPLY
WATER LINE WITH
DRAIN  CONDUITS
LINES
11 12
B
0.50
(MAX
1.00
(MIN)
1.00
(MIN
TYPICAL
TYPICAL  (FASTENERS NOT SHOWN)
(VIEW LOOKING OUTBOARD)
NOTE 1:
THIS ILLUSTRATION IS FOR
ILLUSTRATIVE PURPOSES. THE  3029682
MIGHT BE DIFFERENT THAN SHOWN  CONFIGURATION ON YOUR AIRPLANE  TAPE APPLICATION AREA
FIGURE 16: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY AND SLITTED SHIELD INSTALLATION
(SHEET 2 OF 11)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  81 of 155

### Page 20 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
LBL  LBL
108  CUT/ACCESS SLIT  98
ADDITIONAL
SUPPLY HOSE
(MIN)  2.50  WATER SUPPLY LINE  WITH CONDUITS
034Є
CUT/ACCESS SLIT
INBD
EXAMPLE OF SLITTED
SPRAY SHIELD
(VIEW LOOKING FORWARD)
B-B
3029684
FIGURE 16: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY AND SLITTED SHIELD INSTALLATION
(SHEET 3 OF 11)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  82 of 155

### Page 21 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
• BRACKET
1.00
— (MIN)
WATER SUPPLY
LINE
1.00
(MIN)
10)(11)  (12
1.00
(MIN)
FWD
TYPICAL
INBD  (VIEW LOOKING DOWN)
D-D
TYPICAL
(VIEW LOOKING AFT)
C-C
NOTE 1:
THIS ILLUSTRATION IS FOR
ILLUSTRATIVE PURPOSES. THE  3029676
CONFIGURATION ON YOUR AIRPLANE
MIGHT BE DIFFERENT THAN SHOWN.
FIGURE 16: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY AND SLITTED SHIELD INSTALLATION
(SHEET 4 OF 11)
Original Issue: August 07, 2024
747-38A2146 RB
Export Controlled ECCN: 9E991
See page 1 for details  83 of 155

### Page 22 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
ADDITIONAL
1.00  SUPPLY HOSE
STA  (APPROXIMATELY)  STA
600  1.00  580
LOWER SURFACE  (APPROXIMATELY)
OF FLOOR BEAMS
24) 25 26 27
AND
WATER SUPPLY
LINE WITH
CONDUITS
WATER DRAIN
LINES
1.00
FORWARD END  1.00 _  (MIN)
OF CONDUITS  (MIN)
2.00
(MIN)
TYPICAI
(VIEW LOOKING OUTBOARD)
0.50
(MAX)
NOTE 1:
THIS ILLUSTRATION IS FOR  (FASTENERS NOT SHOWN)
ILLUSTRATIVE PURPOSES. THE  3029678
CONFIGURATION ON YOUR AIRPLANE
MIGHT BE DIFFERENT THAN SHOWN.
FIGURE 16: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY AND SLITTED SHIELD INSTALLATION
(SHEET 5 OF 11)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  84 of 155

### Page 23 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
ADDITIONAL
' SUPPLY HOSE
14 18  ₩ 18
BRACKET
• WATER SUPPLY
LINE
INBD
NOTE 1:  TYPICAL
THIS ILLUSTRATION IS FOR  (VIEW LOOKING AFT)
ILLUSTRATIVE PURPOSES. THE  CONFIGURATION ON YOUR AIRPLANE  E-E  3029685
MIGHT BE DIFFERENT THAN SHOWN.
FIGURE 16: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY AND SLITTED SHIELD INSTALLATION
(SHEET 6 OF 11)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  85 of 155

### Page 24 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
ADDITIONAL
ADDITIONAL  SUPPLY HOSE
SUPPLY HOSE
(27) TAPE
ENVELOPE
ASSEMBLY
CLAMP, STANDOFF
TIE WRAP, OR OTHER
OBSTRUCTION
26) STRAP
CUT/ACCESS
SLIT
TAPE 27
25 26 27)
12.00  ENVELOPE
(MAX)  ASSEMBLY  EXAMPLE
(TYPICAL CUT/ACCESS SLIT IN
AN ENVELOPE ASSEMBLY)
26) STRAP
3.00  4.00
0.50
ENVELOPE
ASSEMBLY
TYPICAL
(ONE OF THE TWO ENDS SHOWN)
CUT/ACCESS
SLIT
HOOK/LOOF  HOOK/LOOP
ENVELOPE ASSEMBLY  SHOWN UNFOLDED  TAPE
TAPE APPLICATION AREA  3029686
FIGURE 16: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY AND SLITTED SHIELD INSTALLATION
(SHEET 7 OF 11)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  86 of 155

### Page 25

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
DO NOT COVER IN-LINE HEATER HOUSING, NECK, OR NUT WITH ENVELOPE AS-
SEMBLIES.
CAUTION
(a)1417U2603-1015ENVELOPE ASSYPut / Hold1
(a)1417U2603-1016ENVELOPE ASSYPut / Hold
(b)1417U2603-1015ENVELOPE ASSYCut2
(b)1417U2603-1016ENVELOPE ASSYCut
(c)-BMS 5-157, TYPE I,
CLASS 2, FORM 1,
GRADE C, COMPOSI-
TION MPEEK
TAPEApply
(d)1417U2603-1015ENVELOPE ASSYInstall (New)3
(d)1417U2603-1016ENVELOPE ASSYInstall (New)
(e)1417U2603-1015ENVELOPE ASSYAdjust4
(e)1417U2603-1016ENVELOPE ASSYAdjust
(f)(g)-BMS 5-157, TYPE I,
CLASS 2, FORM 1,
GRADE C, COMPOSI-
TION MPEEK
TAPEApply5
(h)--SCREWRemove / Keep6
(h)--NUTRemove / Keep
(h)--WASHERRemove / Keep
(h)--CLAMPRemove / Keep
DO NOT COVER IN-LINE HEATER HOUSING, NECK, OR NUT WITH ENVELOPE AS-
SEMBLIES.
CAUTION
(d)1417U2603-1015ENVELOPE ASSYInstall (New)7
(i)1417U2603-1015ENVELOPE ASSYCut8
(c)-BMS 5-157, TYPE I,
CLASS 2, FORM 1,
GRADE C, COMPOSI-
TION MPEEK
TAPEApply
FIGURE 16: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY AND SLITTED SHIELD INSTALLATION
(SHEET 8 OF 11)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: August 07, 2024
747-38A2146 RB
87 of 155
REQUIREMENTS BULLETIN 747-38A2146
ALERTALERT

### Page 26

More DataQtyIdentificationNameTaskStep
(h)--CLAMPInstall (Kept)9
(h)--WASHERInstall (Kept)
(h)--SCREWInstall (Kept)
(h)--NUTInstall (Kept)
(d)1417U2603-1016ENVELOPE ASSYInstall (New)10
(j)1417U2603-1015ENVELOPE ASSYAdjust11
(j)1417U2603-1016ENVELOPE ASSYAdjust
(g)-BMS 5-157, TYPE I,
CLASS 2, FORM 1,
GRADE C, COMPOSI-
TION MPEEK
TAPEApply12
(h)--SCREWRemove / Keep13
(h)--NUTRemove / Keep
(h)--WASHERRemove / Keep
(h)--CLAMPRemove / Keep
(d)1417U2603-1015ENVELOPE ASSYInstall (New)14
(i)1417U2603-1015ENVELOPE ASSYCut15
(c)-BMS 5-157, TYPE I,
CLASS 2, FORM 1,
GRADE C, COMPOSI-
TION MPEEK
TAPEApply
(h)--CLAMPInstall (Kept)16
(h)--WASHERInstall (Kept)
(h)--SCREWInstall (Kept)
(h)--NUTInstall (Kept)
(d)1417U2603-1016ENVELOPE ASSYInstall (New)17
(j)1417U2603-1015ENVELOPE ASSYAdjust18
(j)1417U2603-1016ENVELOPE ASSYAdjust
(g)-BMS 5-157, TYPE I,
CLASS 2, FORM 1,
GRADE C, COMPOSI-
TION MPEEK
TAPEApply19
(d)2417U2603-1015ENVELOPE ASSYInstall (New)20
(d)2417U2603-1016ENVELOPE ASSYInstall (New)21
FIGURE 16: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY AND SLITTED SHIELD INSTALLATION
(SHEET 9 OF 11)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: August 07, 2024
747-38A2146 RB
88 of 155
REQUIREMENTS BULLETIN 747-38A2146
ALERTALERT

### Page 27

More DataQtyIdentificationNameTaskStep
(g)(k)-BMS 5-157, TYPE I,
CLASS 2, FORM 1,
GRADE C, COMPOSI-
TION MPEEK
TAPEApply22
(l)1417U2603-1021ENVELOPE ASSEM-
BLY
Put / Hold23
(l)1417U2603-1021ENVELOPE ASSEM-
BLY
Put / Hold24
(m)2417U2603-1021ENVELOPE ASSEM-
BLY
Cut25
(c)-BMS 5-157, TYPE I,
CLASS 2, FORM 1,
GRADE C, COMPOSI-
TION MPEEK
TAPEApply
(n)(d)2417U2603-1021ENVELOPE ASSEM-
BLY
Install (New)26
(n)-BACS38K2STRAPInstall (New)
(k)(o)-BMS 5-157, TYPE I,
CLASS 2, FORM 1,
GRADE C, COMPOSI-
TION MPEEK
TAPEApply27
(a) Engage the hook tape with the loop tape of the two envelope assemblies to make a slitted spray shield.
Put and hold the slitted spray shield forward of the in-line heater and near the riser. Make sure that it does
not touch the in-line heater body, neck or nut.
(b) Cut an access slit(s) for the water and drain systems or components that must go through the slitted spray
shield. Make sure that an un-cut area in the center of the slitted spray shield is larger than 2.50 inch. If
more than two access slits are necessary, make sure a minimum 2.50 inches distance is kept between
the access slits.
(c) Apply tape to the cut edges and/or damaged surfaces of the envelope assembly. Refer to APPENDIX A
as an accepted procedure.
(d) It is permitted to locally compress the envelope assembly to make sure that it aligns better with the adjacent
surfaces or parts.
(e) Make sure the two envelope assemblies fit around the applicable water supply fitting and/or line.
(f) Put the edges of slitted spray shield access slit together and apply tape on each side of the access slit
to close it. Refer to APPENDIX A as an accepted procedure.
(g) Apply tape to the inboard and outboard sides of the mating envelope assemblies to close any gaps.
(h) No part identification or quantity given. The identification and quantity of parts used can be different between
the configurations.
(i) Not to exceed 0.50 inch in length in any direction.
FIGURE 16: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY AND SLITTED SHIELD INSTALLATION
(SHEET 10 OF 11)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: August 07, 2024
747-38A2146 RB
89 of 155
REQUIREMENTS BULLETIN 747-38A2146
ALERTALERT

### Page 28

More DataQtyIdentificationNameTaskStep
(j) Make sure that all fittings and connections are completely inside the envelope assemblies.
(k) Overlap the tape by a minimum of 1.00 inch on to each adjacent envelope assembly.
(l) Put the envelope assembly around the additional water supply hose and engage the hook tape with the
loop tape of the envelope assembly. It is acceptable to trim the -1021 envelope to the underside of the
floor.
(m) Cut an access slit in the envelope assembly in the areas where the installed components, for example
clamps and straps, systems or structure do not let hook and loop tape be engaged fully. Make sure a
minimum of 4.00 inch edge margin of the uncut area of the envelope assembly is kept.
(n) Install strap 0.50 - 3.00 inches from both ends of the envelope. Make sure envelope is supported between
end straps a maximum 12.00 inches between straps.
(o) For each side of any cut/access slit, apply tape around the envelope assembly two times. Make sure each
layer of tape is wound concentrically with the layer below.
FIGURE 16: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY AND SLITTED SHIELD INSTALLATION
(SHEET 11 OF 11)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: August 07, 2024
747-38A2146 RB
90 of 155
REQUIREMENTS BULLETIN 747-38A2146
ALERTALERT

### Page 29 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
This Figure applies only to: Group 9.
STA
660 STA
580
N
FORWARD CARGO
COMPARTMENT
LOWER SURFACE
OF FLOOR BEAMS  WATER DRAIN
LINE
STA  STA  STA  STA  STA  STA
660  650  640  620  600  580
WATER SUPPLY  WATER DRAIN
LINE  LINE
FWD  EQUIPMENT
COOLING SUPPLY
AIR INLET
(VIEW LOOKING OUTBOARD)  TYPICAL  FITTING
A-A  (MAX)  1.00
NOTE 1:
WATER DRAIN LINE
THIS ILLUSTRATION IS FOR
ILLUSTRATIVE PURPOSES. THE
CONFIGURATION ON YOUR AIRPLANE
MIGHT BE DIFFERENT THAN SHOWN.
NOTE 2:
POSITION OF THE WATER SUPPLY LINE  ON YOUR AIRPLANE MIGHT BE  D234  WATER SUPPLY LINE  END FITTING SLEEVE  3029691
DIFFERENT THAN SHOWN.  WATER DRAIN LINE
FIGURE 17: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 1 OF 5)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  91 of 155

### Page 30 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
D
—WATER SUPPLY LINE
0.50
0.50
(MIN)  (MIN)
SLIT
0.50
(MIN)  0.50
(MIN)
TYPICAL
INBD  (STRAP NOT SHOWN)
VIEW LOOKING FORWARD
B-B
3.00  0.50  • 12.00 (MAX)  D2346
WATER SUPPLY LINE
AFT END OF
CONDUIT
TYPICAI
(VIEW LOOKING OUTBOARD)
(FORWARD END OF CONDUIT SIMILAR)  (AFT END OF CONDUIT SHOWN)  3029696
C-C
FIGURE 17: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 2 OF 5)
Original Issue: August 07, 2024
747-38A2146 RB
Export Controlled ECCN: 9E991
See page 1 for details  92 of 155

### Page 31 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
WATER SUPPLY LINE  DRAIN SLOPE  2.5°
(MIN)
• A DIP WHERE
WATER COLLECTS
FWD
0.375
(MAX)  AN EXAMPLE OF A LOCAL WATER TRAP THAT
CAN OCCUR IN THE WATER SUPPLY LINE
(CONDUITS NOT SHOWN)
(VIEW LOOKING OUTBOARD)
WATER SUPPLY LINE  D-D
WITH CONDUITS
(8) STRAP
® TAPE
TAPE ®
WATER DRAIN
LINES
STRAP 8
WATER DRAIN
LINE
® STRAP
WATER SUPPLY  (8) SPACER
LINE WITH
CONDUITS
ALTERNATIVE
(VIEW LOOKING FORWARD)
NOTE 2:  E-E  LINTER DRAIN
POSITION OF THE WATER SUPPLY LINE
ON YOUR AIRPLANE MIGHT BE
DIFFERENT THAN SHOWN.  INBD
NOTE 3:
THIS SUPPORT CONFIGURATION IS FOR  ILLUSTRATIVE PURPOSES. THE  (VIEW LOOKING FORWARD)  ALTERNATIVE
SUPPORT CONFIGURATION ON YOUR  F-F
AIRPLANE MIGHT BE DIFFERENT THAN  SHOWN OR THERE IS NO SUPPORT IN  3029698
YOUR CONFIGURATION.
FIGURE 17: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 3 OF 5)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  93 of 155

### Page 32

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
(a)1417U2912-14CONDUITPut / Hold1
(a)1417U2912-14CONDUITPut / Hold2
(b)2417U2912-14CONDUITMeasure3
Cut at marks.2417U2912-14CONDUITCut
-1417U2912-14CONDUITInstall (New)4
-1417U2912-14CONDUITInstall (New)5
Apply at slits.(c)-BMS5-146 TYPE 1,
CLASS 1, GRADE A,
1.50 INCH MINIMUM
WIDTH
FIBERGLASS TAPEApply6
(d)-BACS38K2STRAPInstall (New)7
Make sure conduit
assy from steps 4-7
are oriented per
view B-B. (d)(e)
-BACS38K2STRAPInstall (New)8
This part is also re-
ferred to as a 'spac-
er' and its installation
is optional. (f)
-CR4HCONNECTOR RINGInstall (New)
(g)2417U2912-14CONDUITAdjust
(h)-BMS5-146 TYPE 1,
CLASS 1, GRADE A,
1.00 INCH MINIMUM
WIDTH
FIBERGLASS TAPEApply
(g)2417U2912-14CONDUITAdjust9
(a) Make sure the FWD end of the conduits are a maximum of 1.00 inch AFT of the water supply line end
fitting sleeve located FWD of STA 600 stanchion.
(b) Mark the AFT end of the conduits a minimum of 10.00 inches AFT of the FWD edge of stanchion at STA
640. Acceptable to have excess length AFT of STA 650.
(c) Apply tape in one continuous strip longitudinally. Tape segments can be used provided there is a minimum
of 0.50 inch overlap at all tape seams.
(d) Install strap 0.50 - 3.00 inches from both ends of the conduit. Make sure conduit is supported between
end straps a maximum of every 12.00 inches with combination of straps and any existing supports.
(e) Use the straps to attach the water supply line with the conduits to the adjacent water drain line, with
preference to the upper drain line.
FIGURE 17: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 4 OF 5)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: August 07, 2024
747-38A2146 RB
94 of 155
REQUIREMENTS BULLETIN 747-38A2146
ALERTALERT

### Page 33

More DataQtyIdentificationNameTaskStep
(f) Use an optional spacer between the water supply line with conduits and drain line to prevent a riding
condition and water traps, and to keep a minimum 2.50 degree drain slope.
(g) Make sure that the conduits are straight, keep a minimum 2.50 degree drain slope and do not have any
localized dip in the water supply line not covered by the conduits that could prevent water from draining.
Maximum allowable dip is 0.375 inch. A depth of the dip that is larger than 0.375 inches can cause a
water trap and is not permitted. Additional straps and/or supports beyond the conduit ends may be loosened
or replaced to adjust supply line. It can be necessary to remove additional sidewall liners up to STA 540
and STA 700.
(h) Apply two layers of tape around each strap. Make sure tape is centered around the strap.
FIGURE 17: LEFT SIDE FORWARD CARGO COMPARTMENT - POTABLE WATER SYSTEM - WATER
SUPPLY LINE CONDUIT INSTALLATION
(SHEET 5 OF 5)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: August 07, 2024
747-38A2146 RB
95 of 155
REQUIREMENTS BULLETIN 747-38A2146
ALERTALERT

### Page 34 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
This Figure applies only to: Group 9.
STA
620
STA
560
FORWARD CARGO
COMPARTMENT
WATER SUPPLY LINE  LOWER SURFACE
WITH CONDUITS  STA  OF FLOOR BEAMS
STA  STA  580  STA
620  600  560
EQUIPMENT COOLING  WATER DRAIN
SUPPLY AIR INLET  LINES
NOTE 1:
THIS ILLUSTRATION IS FOR  TYPICAL
ILLUSTRATIVE PURPOSES. THE  (VIEW LOOKING OUTBOARD)  3029702
MIGHT BE DIFFERENT THAN SHOWN.  CONFIGURATION ON YOUR AIRPLANE  A-A
FIGURE 18: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY INSTALLATION
(SHEET 1 OF 5)
Original Issue: August 07, 2024
747-38A2146 RB
Export Controlled ECCN: 9E991
See page 1 for details  96 of 155

### Page 35 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
STA
580
1.00
(MIN)
STA  X10X11  1.00
600  (MIN)
FORWARD  IN-LINE HEATER
END OF  HOUSING
CONDUITS  NUT
WATER
SUPPLY
LINE WITH
CONDUITS
ADDITIONAL
SUPPLY HOSE
WATER  DRAIN LINES  B  4 LOCATIONS
1.00
(MIN)  1.00  12 13 14
(MIN)
2.00
(MIN)  TYPICA  0.50  (MAX)
(VIEW LOOKING OUTBOARD)
TYPICAL
(4 LOCATIONS)
(FASTENERS NOT SHOWN
TAPE APPLICATION AREA  3029705
FIGURE 18: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY INSTALLATION
(SHEET 2 OF 5)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  97 of 155

### Page 36 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
10 11)
ADDITIONAL
'SUPPLY HOSE
14
WATER SUPPLY
LINE
BRACKET
NBD
TYPICAL
(VIEW LOOKING AFT)
B-B  3029706
FIGURE 18: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY INSTALLATION
(SHEET 3 OF 5)
Original Issue: August 07, 2024
747-38A2146 RB
Export Controlled ECCN: 9E991
See page 1 for details  98 of 155

### Page 37

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
(a)--SCREWRemove / Keep1
(a)--NUTRemove / Keep
(a)--WASHERRemove / Keep
(a)--CLAMPRemove / Keep
(a)--SCREWRemove / Keep2
(a)--NUTRemove / Keep
(a)--WASHERRemove / Keep
(a)--CLAMPRemove / Keep
(a)--SPACERRemove / Keep
DO NOT COVER IN-LINE HEATER HOUSING, NECK, OR NUT WITH ENVELOPE AS-
SEMBLIES.
CAUTION
(b)1417U2603-1015ENVELOPE ASSYInstall (New)3
(c)-417U2603-1015ENVELOPE ASSYCut4
(d)-BMS 5-157, TYPE I,
CLASS 2, FORM 1,
GRADE C, COMPOSI-
TION MPEEK
TAPEApply
(a)--SPACERInstall (Kept)5
(a)--CLAMPInstall (Kept)
(a)--WASHERInstall (Kept)
(a)--NUTInstall (Kept)
(a)2-SCREWInstall (Kept)
(a)--CLAMPInstall (Kept)6
(a)--WASHERInstall (Kept)
(a)--SCREWInstall (Kept)
(a)--NUTInstall (Kept)
DO NOT COVER IN-LINE HEATER HOUSING, NECK, OR NUT WITH ENVELOPE AS-
SEMBLIES.
CAUTION
(b)1417U2603-1016ENVELOPE ASSYInstall (New)7
FIGURE 18: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY INSTALLATION
(SHEET 4 OF 5)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: August 07, 2024
747-38A2146 RB
99 of 155
REQUIREMENTS BULLETIN 747-38A2146
ALERTALERT

### Page 38

More DataQtyIdentificationNameTaskStep
(e)1417U2603-1015ENVELOPE ASSYAdjust8
(e)1417U2603-1016ENVELOPE ASSYAdjust
DO NOT COVER IN-LINE HEATER HOUSING, NECK, OR NUT WITH ENVELOPE AS-
SEMBLIES.
CAUTION
(b)1417U2603-1015ENVELOPE ASSYInstall (New)9
DO NOT COVER IN-LINE HEATER HOUSING, NECK, OR NUT WITH ENVELOPE AS-
SEMBLIES.
CAUTION
(b)1417U2603-1016ENVELOPE ASSYInstall (New)10
(e)1417U2603-1015ENVELOPE ASSYAdjust11
(e)1417U2603-1016ENVELOPE ASSYAdjust
(b)2417U2603-1015ENVELOPE ASSYInstall (New)12
(b)2417U2603-1016ENVELOPE ASSYInstall (New)13
(f)(g)-BMS 5-157, TYPE I,
CLASS 2, FORM 1,
GRADE C, COMPOSI-
TION MPEEK
TAPEApply14
(a) No part identification or quantity given. The identification and quantity of parts used can be different between
the configurations.
(b) It is permitted to locally compress the envelope assembly to make sure that it aligns better with the adjacent
surfaces or parts.
(c) Not to exceed 0.50 inch in length in any direction.
(d) Apply tape to the cut edges and/or damaged surfaces of the envelope assembly. Refer to APPENDIX A
as an accepted procedure.
(e) Make sure that all fittings and connections are completely inside the envelope assemblies.
(f) Apply tape to the inboard and outboard sides of the mating envelope assemblies to close any gaps.
(g) Overlap the tape by a minimum of 1.00 inch on to each adjacent envelope assembly.
FIGURE 18: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY INSTALLATION
(SHEET 5 OF 5)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: August 07, 2024
747-38A2146 RB
100 of 155
REQUIREMENTS BULLETIN 747-38A2146
ALERTALERT

### Page 39 (OCR)

REQUIREMENTS BULLETIN 747-38A2146
ALERT  ALERT
This Figure applies only to: Group 10.
STA
620
STA
560
FORWARD CARGO
COMPARTMENT
WATER SUPPLY LINE  WITH CONDUITS  STA  580  LOWER SURFACE  OF FLOOR BEAMS
STA  STA
620  600
EQUIPMENT COOLING  WATER DRAIN
SUPPLY AIR INLET  LINES
-WD
NOTE 1:
TYPICAL
THIS ILLUSTRATION IS FOR  (VIEW LOOKING OUTBOARD)
CONFIGURATION ON YOUR AIRPLANE  ILLUSTRATIVE PURPOSES. THE  A-A  3048611
MIGHT BE DIFFERENT THAN SHOWN.
FIGURE 19: LEFT SIDE FORWARD CARGO COMPARTMENT, POTABLE WATER SYSTEM - WATER
SUPPLY LINE - WATER SPRAY ENVELOPE ASSEMBLY INSTALLATION
(SHEET 1 OF 7)
Original Issue: August 07, 2024
Export Controlled ECCN: 9E991  747-38A2146 RB
See page 1 for details  101 of 155

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
