# Boeing Alert Service Bulletin 747-53A2427: U.S. DOT/FAA - Service Bulletin

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2013-0425; AD 2014-07-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 747-53A2427](https://openairdocs.org/service-documents/boeing/747-53a2427.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin
- Pages: 126
- PDF: https://openairdocs.org/files/sha256/07/a7/07a7627b260940267e77f3ee9f54b03c148e6002328ae907b179e4162d518314
- Page: https://openairdocs.org/service-documents/boeing/747-53a2427/file/07a7627b2609

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
747
Service Bulletin
ALERT
Number: 747-53A2427
Original Issue: December 17, 1998
Revision 7: July 19, 2013
ATA System: 5313
SUBJECT: FUSELAGE - Tail Section - Body Station 2598 Bulkhead Inner Chord and Web
Inspection
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 1998 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
1 of 126
5.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
2 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ...................................................... 9
1. PLANNING INFORMATION ........................................ 1 3
A. Effectivity ............................................... 1 3
1. Airplanes ............................................ 1 3
2. Spares Affected ........................................ 2 2
B. Concurrent Requirements ...................................... 2 2
C. Reason ................................................ 2 3
D. Description .............................................. 2 3
E. Compliance .............................................. 2 5
F. Approval ............................................... 3 6
G. Manpower .............................................. 3 7
H. Weight and Balance Changes .................................... 3 7
I. Electrical Load Data ......................................... 3 7
J. References .............................................. 3 8
1. Existing Data: ......................................... 3 8
2. Data Supplied with this Service Bulletin: ........................... 3 8
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 3 8
K. Publications Affected ........................................ 3 9
L. Interchangeability and Intermixability of Parts ........................... 3 9
M. Software Accomplishment Summary ................................ 3 9
2. MATERIAL INFORMATION ........................................ 4 1
A. Material - Price and Availability ................................... 4 1
B. Industry Support Information .................................... 4 1
C. Parts Necessary for Each Airplane ................................. 4 1
1. Kits/Parts: ........................................... 4 1
2. Parts and Materials Supplied by the Operator: ........................ 4 1
3. Parts Modified and Reidentified: ............................... 4 1
4. Parts Removed and Not Replaced: .............................. 4 1
D. Parts Necessary to Change Spares ................................. 4 1
E. Special Tooling - Price and Availability ............................... 4 1
F. Special Tooling Necessary to do this Service Bulletin ....................... 4 2
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 4 3
A. GENERAL INFORMATION ..................................... 4 3
B. WORK INSTRUCTIONS ....................................... 4 4
FIGURE 1: DELETED ............................................ 4 9
FIGURE 2: INSPECTION .......................................... 5 0
FIGURE 3: DELETED ............................................ 6 0
FIGURE 4: WEB CRACK REMOVAL ................................... 6 1
FIGURE 5: INSPECTION - POST REPAIR / INTERIM MODIFICATION - REPAIRED/MODIFIED AREA
.................................................. 6 4
FIGURE 6: INSPECTION - POST REPAIR / INTERIM MODIFICATION - FORWARD SIDE ...... 7 5
FIGURE 7: WEB REPAIR OR INTERIM MODIFICATION - NO EXISTING INNER CHORD REPAIR OR
INTERIM MODIFICATION [Group 1, Configuration 1] .................... 7 9
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
3 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 4

FIGURE 8: WEB REPAIR OR INTERIM MODIFICATION - NO EXISTING INNER CHORD REPAIR OR
INTERIM MODIFICATION [Group 2-3, Configuration 1] ................... 9 0
FIGURE 9: UPPER WEB REPAIR - EXISTING INNER CHORD REPAIR OR INTERIM MODIFICATION
[Group 1, Configuration 2] .................................. 1 0 0
FIGURE 10: UPPER WEB REPAIR - EXISTING INNER CHORD REPAIR OR INTERIM MODIFICATION
[Group 2-3, Configuration 2] ................................. 1 1 2
APPENDIX A: SERVICE HISTORY ..................................... 1 2 4
APPENDIX B: PREVIOUS REVISION CHANGE INFORMATION ..................... 1 2 6
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
4 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 5

Commercial 
Airplanes
747
Service Bulletin
ALERT
Revision Transmittal SheetNumber: 747-53A2427Original Issue: December 17, 1998
Revision 7: July 19, 2013
ATA System: 5313
SUBJECT: FUSELAGE - Tail Section - Body Station 2598 Bulkhead Inner Chord and Web
Inspection
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
More work is necessary on airplanes changed in accordance with previous releases of this service bulletin;
however, it is not necessary to do this additional work sooner than the compliance time for the next inspection
as specified in the previous release of this service bulletin. This revision extends the bulkhead inspection to
include additional surface and open hole HFEC inspection for cracks at/near the frame support upper splice
fittings and additional open hole HFEC inspection for cracks at/near the frame support lower splice fittings.
Federal Aviation Administration (FAA) Airworthiness Directive AD 2010-14-07 and FAA Airworthiness Directive
AD 2004-07-22 R1 are related to this service bulletin.
REASON FOR REVISION
After the release of Revision 6 of this service bulletin, an operator reported a crack found in the web section of
the bulkhead frame support where it is sandwiched between the upper splice fitting and the aft inner chord. This
crack was found (at 12,302 flight cycles) because the splice fitting was removed to do a repair for a different
crack found in the chord section of the frame support. Also, 1.8 inch and 1.6 inch cracks have been found in the
frame support upper splice fitting on airplanes with 12,302 and 13,728 flight cycles respectively. These cracks
were found in the fillet radius of the splice fitting horizontal flange where it connects to the upper shear deck.
Also, 0.07 inch and 0.50 inch cracks have been found in the RS frame support lower splice fitting on airplanes
with 10,409 and 19,203 flight cycles respectively. In response to these crack findings, this revision extends the
open hole HFEC inspection for cracks given in this service bulletin to include more fastener holes common to
the upper and lower splice fittings on both sides of the bulkhead, plus some additional fastener holes adjacent
to the lower splice fitting. Also, this revision extends the surface HFEC inspection for cracks to include the fillet
radius area of the upper splice fitting. This expansion of the open hole and surface inspections is necessary to
find cracks that could have an effect on the structural integrity of the bulkhead.
Also, this revision is sent to clarify the compliance time for the initial surface HFEC inspection of the upper web
for airplanes modified or repaired before the upper web inspection was added with revision 6 to this service
bulletin. This revision clarifies that the compliance time for the next post-repair/modification inspection (referenced
to the time of the repair/modification) is applicable for the first inspection of the web in such cases.
This revision is also sent to identify/include the modification given in service bulletin 747-53A2837 as an additional
terminating action for the inspections given in this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
5 of 126

### Page 6

These sections of the service bulletin have been changed:
1. Paragraph 1.D., Description, and Paragraph 3.B., Work Instructions: The modification given in service
bulletin 747-53A2837 is identified/added as a terminating action for the inspections given in this service
bulletin. Previously, only the modification given in service bulletin 747-53A2473 (or 747-53-2473) was
given as a terminating action. In Paragraph 3.B it is also noted that the modification given in service
bulletin 747-53A2837 has been approved as an AMOC (an alternative to the modification given in
service bulletin 747-53A2473) for AD 2010-14-07.
2. Paragraph 1.E., Compliance: Table 1 is revised to include the inspection areas added with this revision
and to include reference to service bulletin 747-53A2837. Revision bars were added to the table for
these additions. Other changes were made that rearranged the table to make it more clear/concise;
however, these secondary changes didn't change the actions/times given previously and therefore
revision bars were not added to the table for these changes. The secondary changes include the division
of actions into upper area actions and lower area actions and also into actions associated with specific
revisions to this service bulletin. Also, descriptive details of the actions have been moved into notes to
make the information in the table itself more concise.
3. Paragraph 1.E., Compliance: Table 2 is revised to include the inspection areas added with this revision
and to include reference to service bulletin 747-53A2837. Revision bars were added to the table for
these additions. Other changes were made that rearranged the table to make it more clear/concise;
however, these secondary changes didn't change the actions/times given previously and therefore
revision bars were not added to the table for these changes. The secondary changes include the division
of actions into upper area actions and lower area actions and also into actions associated with specific
revisions to this service bulletin. Also, descriptive details of the actions have been moved into notes to
make the information in the table itself more concise.
4. Paragraph 1.E., Compliance: Table 3 is revised to include the inspection areas added with this revision
and to include reference to service bulletin 747-53A2837. Also, the time given in row 2 of Compliance
Table 3 was changed from: "Within 6,000 flight cycles after accomplishment of the chord and/or web
repair" to: "Within 6,000 flight cycles after accomplishment of the chord and/or web repair or Interim
Modification". Also, a note (about continued lower area inspection) that previously preceded the table
was moved to the Action column header inside the table to better link the note to the information in the
table.
5. Paragraph 1.H., Weight and Balance Changes: relocated a misplaced decimal point in the moment
change value for Group 1 airplanes (2218.0 in-lb was 22180.0 in-lb in previous revision) and provided
moment change values for Group 2, 3 airplanes which were inadvertently omitted from the previous
revision of this service bulletin.
6. Paragraph 2.C.2, Parts and Materials Supplied by the Operator: Clarified that specified parts quantities
are for one/each side of the airplane.
7. Paragraph 3.B., Work Instructions:
Part 1: Added reference to service bulletin 747-53A2837 as a terminating action for the inspections
given in this service bulletin and as an AMOC (to the modification given in service bulletin 747-53A2473)
for AD 2010-14-07. Also added reference to 747-400F SRM for inner chord repair and added a Figure
number to the 747-SP SRM reference for the inner chord repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
6 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 7

Part 3: The Caution statement previously included in only Part 1 and Part 2 of the work instructions
(regarding use of the STA 2598 jack point) was added to Part 3 where it is also applicable. Also added
reference to service bulletin 747-53A2837 as a terminating action for the inspections given in this
service bulletin and as an AMOC (to the modification given in service bulletin 747-53A2473) for AD
2010-14-07.
8. Figure 2: Expanded inspection work to include additional surface and open hole inspection
areas/locations and associated fastener replacement data.
9. Figure 5: Expanded post-repair/modification inspection work to include additional open hole inspection
locations and associated fastener replacement data.
10. Figure 6: Expanded post-repair/modification inspection work to include surface HFEC inspection in the
fillet radius area of the upper splice fitting.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
December 17, 1998Original Issue:
October 28, 1999Revision 1:
October 05, 2000Revision 2:
September 27, 2001Revision 3:
March 06, 2008Revision 4:
October 01, 2009Revision 5:
July 14, 2011Revision 6:
July 19, 2013Revision 7:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
7 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 8

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
8 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
747
Service Bulletin
ALERT
SummaryNumber: 747-53A2427Original Issue: December 17, 1998
Revision 7: July 19, 2013
ATA System: 5313
SUBJECT: FUSELAGE - Tail Section - Body Station 2598 Bulkhead Inner Chord and Web
Inspection
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Accomplishment of the inspections given in this service bulletin will make sure that cracks in the frame supports,
upper and lower splice fittings, floor supports, forward and aft inner chords, and upper and lower web panels of
the Body Station (STA) 2598 bulkhead are found and repaired before the crack damage can have an effect on
flight safety. The horizontal stabilizer hinge fittings are attached to the STA 2598 bulkhead. Cracks in the bulkhead
splice fittings, frame supports, web, or inner chords that are not found and repaired could extend with continued
use of the airplane and adversely affect the structural integrity of the bulkhead and the horizontal stabilizer
support structure.
Eleven operators have told Boeing about cracks that were found in the aft inner chord of the STA 2598 bulkhead
on 14 airplanes. In addition, three operators have also told Boeing about cracks that were found in the forward
inner chord of the STA 2598 bulkhead on three airplanes. These cracks were all found near the upper corners
of the cutout for the horizontal stabilizer rear spar. Refer to Appendix A for more information about service history.
NOTE: Refer to Appendix A for service history data for the period between the original issue and Revision 6
of this service bulletin. Refer to Appendix B for Revision 1-6 change information previously described
in this Service Bulletin.
After the release of Revision 6 of this service bulletin, operators reported cracks found in the frame support (one
airplane) and the upper and lower frame support splice fittings (four airplanes). These cracks were found between
10,409 to 19,203 flight cycles. The surface and open hole HFEC inspections given in this service bulletin have
been expanded in response to these findings.
Boeing Structural Item Interim Advisory (SIIA) 747-167 is related to this Service Bulletin.
Boeing Service Related Problem (SRP) 747/747OP-SRP-53-0106, 747/747OP-SRP-53-0316, 747-SRP-53-0343,
and 747-SRP-53-0427  are related to this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
9 of 126

### Page 10

This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedNoPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION
Do open hole and surface high frequency eddy current (HFEC) inspections for cracks in the left and right side
frame supports, splice fittings, forward and aft inner chords and floor supports. In addition, do open hole and
surface HFEC inspections for cracks in the bulkhead upper and lower web near the aft inner chord to shear
deck connection.
If no crack(s) are found, repeat the open hole and surface HFEC inspections, or alternatively, accomplish a
modification in accordance with Service Bulletin 747-53A2473 or 747-53A2837 . No further action is required
by this service bulletin after modification in accordance with Service Bulletin 747-53A2473 or 747-53A2837 .
If a crack is found in the aft inner chord only, accomplish the inner chord repair given in this service bulletin, or
alternatively, accomplish a modification in accordance with Service Bulletin 747-53A2473 or 747-53A2837 .
If a crack is found in a splice fitting, frame support, forward inner chord, or floor support, contact Boeing for repair
data and do the repair.
If a crack is found in the bulkhead upper web, accomplish the upper web repair given in this Service Bulletin, or
alternatively, accomplish a modification in accordance with Service Bulletin 747-53A2473 or 747-53A2837 .
If a crack is found in the bulkhead lower web, accomplish a modification in accordance with Service Bulletin
747-53A2473 or 747-53A2837  or contact Boeing for repair data and do the repair.
For Group 1 and group 2 airplanes, an interim modification is to be accomplished in accordance with this service
bulletin by the time given in Paragraph 1.E., Compliance if the modification given in Service Bulletin 747-53A2473
or 747-53A2837  is not accomplished by that time.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
10 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 11

After accomplishment of an inner chord repair, upper web repair, or interim modification, do post-repair/modification
inspections in accordance with this service bulletin.
EFFECTIVITY
747-100/-100B/-100B SUD/-200B/-200C/-200F/-300/-400/-400D/-400F/SP/SR Airplanes. Refer to Paragraph
1.A.1., Airplanes for the list of affected airplanes.
COMPLIANCE
Federal Aviation Administration (FAA) Airworthiness Directive AD 2010-14-07 and FAA Airworthiness Directive
AD 2004-07-22 R1 are related to this service bulletin.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection and/or repair procedures given in this service
bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
11 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 12 (OCR)

BOEING SERVICE BULLETIN 747-53A2427
ALERT  ALERT
STA  IN THE UPPER AND LOWER
2598  INSPECTION AREAS:
ACCOMPLISH OPEN HOLE AND SURFACE
HFEC INSPECTIONS FOR CRACKS IN
THE FORWARD AND AFT INNER CHORDS,
FRAME SUPPORT, SPLICE FITTING AND
WEB PANELS.
ACCOMPLISH REPAIRS AS NECESSARY
STA
2598  AND REGULAR REPEAT INSPECTIONS,
OR ALTERNATIVELY, ACCOMPLISH A
BULKHEAD (SUPPORT FRAME)
MODIFICATION.
UPPER
INSPECTION
AREA
HORIZONTAL
STABILIZER
LOWER
INSPECTION
AREA
S64511
Original Issue: December 17, 1998
Revision 7: July 19, 2013  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2427
Work - See page 1 for details.  12 of 126

### Page 13

Commercial 
Airplanes
747
Service Bulletin
ALERT
Number: 747-53A2427
Original Issue: December 17, 1998
Revision 7: July 19, 2013
ATA System: 5313
SUBJECT: FUSELAGE - Tail Section - Body Station 2598 Bulkhead Inner Chord and Web
Inspection
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is for the airplanes shown below.
Refer to Service Bulletin Index Document D6-30300 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP
Airplanes Line Number 1 to 695-1
Airplanes that do not have the interim modification or aft inner chord
SRM repair
1
Airplanes that have the interim modification or aft inner chord SRM
repair installed.
2
Airplanes Line Number 696 to 1241-2
Airplanes that do not have the interim modification or aft inner chord
SRM repair
1
Airplanes that have the interim modification or aft inner chord SRM
repair
2
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
13 of 126

### Page 14

DESCRIPTIONCONFIGURATIONGROUP
Airplanes Line Number 1242 to 1307-3
Airplanes that do not have an aft inner chord SRM repair1
Airplanes that have an aft inner chord SRM repair2
Airplane Models:
747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400,
747-400D, 747-400F, 747SP, 747SR
GroupVariable Number
1RA001 - RA034
1RA101 - RA115
1RA161 - RA164
1RA201 - RA203
1RA216 - RA217
1RA245 - RA246
1RA251 - RA266
1RA301 - RA318
1RA351 - RA360
1RA369 - RA373
1RA401 - RA418
1RA501 - RA502
1RA521 - RA528
1RA532 - RA548
1RA551 - RA552
1RA559 - RA561
1RA581 - RA582
1RA585
1RA601 - RA602
1RA631 - RA635
1RA651 - RA652
1RA671 - RA677
1RA701 - RA702
1RA721 - RA731
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
14 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 15

GroupVariable Number
1RA741 - RA745
1RA749 - RA750
1RA761 - RA762
1RA781 - RA784
1RA901 - RA916
1RB001 - RB016
1RB041 - RB044
1RB071 - RB075
1RB101 - RB102
1RB411 - RB412
2RB413
2RB421
1RB601 - RB607
1RB681 - RB697
1RB711
1RB721 - RB723
1RB741 - RB748
1RD001 - RD004
1RD021 - RD022
1RD041 - RD059
1RD071 - RD072
1RD081 - RD083
1RD091 - RD092
1RD101 - RD104
1RD121 - RD127
1RD131 - RD144
1RD166 - RD167
1RD171 - RD172
1RD181 - RD183
1RD201 - RD204
1RD221 - RD227
1RD231 - RD234
2RD235
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
15 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 16

GroupVariable Number
1RD241 - RD243
1RD251 - RD262
1RD271 - RD272
1RD291 - RD292
1RD301 - RD302
1RD311
1RD351 - RD358
1RD361 - RD366
1RD381 - RD383
1RD411 - RD414
1RD421 - RD426
1RD431 - RD435
1RD441 - RD442
1RD451 - RD456
1RD461
1RD471 - RD475
1RD513 - RD519
1RD531 - RD533
1RD551
1RD561
1RD571
1RD581 - RD583
1RD591 - RD593
1RD601 - RD607
1RD621 - RD623
1RD641 - RD649
1RD651 - RD659
1RD661
1RD671
1RD681 - RD682
1RD691 - RD692
1RD701 - RD702
1RD721 - RD722
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
16 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 17

GroupVariable Number
1RD741 - RD742
1RD751 - RD755
1RD761
1RD771 - RD775
1RD781 - RD783
1RD791
2RD792
1RE001
1RG001 - RG009
1RG091
1RG095
1RG101 - RG104
1RG121 - RG126
1RG141 - RG142
1RG161 - RG164
1RG171 - RG174
1RG191 - RG193
1RG211 - RG213
1RG221 - RG222
1RH101 - RH102
1RH111 - RH112
1RH121 - RH122
1RJ131 - RJ133
1RJ151 - RJ152
1RJ301 - RJ303
1RJ321
2RJ322
1RJ331 - RJ333
3RL401 - RL402
3RL411 - RL419
3RL651 - RL654
3RL751
2RM001 - RM003
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
17 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 18

GroupVariable Number
3RM004 - RM007
3RM010
2RM011 - RM012
3RM013
2RM021 - RM024
2RM026 - RM027
3RM028 - RM029
2RM036 - RM038
3RM039 - RM040
2RM041
3RM042 - RM045
2RM051
3RM052
2RM071
2RM081 - RM084
2RM091
2RM096 - RM097
2RM116 - RM117
2RM126 - RM131
3RM132
2RM136 - RM147
2RM156 - RM157
3RM158
2RM166 - RM176
3RM177
2RM191 - RM192
2RM231 - RM232
3RM233
2RM241 - RM244
3RM245 - RM246
2RM261 - RM264
2RM316
3RM317 - RM318
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
18 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 19

GroupVariable Number
2RM331 - RM333
3RM341
3RM351 - RM355
3RM366 - RM367
2RM801
3RM802 - RM803
2RM811 - RM813
2RM851 - RM852
3RM853 - RM858
2RM861
3RM862
2RM871
3RM872 - RM876
2RM881 - RM885
3RM886
2RM891 - RM899
2RM901
3RM902 - RM905
2RM911
1RR001 - RR005
1RR021 - RR023
2RR024 - RR025
1RR031
1RR201 - RR205
2RR206
1RR221 - RR226
1RR261 - RR267
1RR301 - RR306
2RR307 - RR310
1RR331 - RR332
1RR336
1RR341 - RR345
1RR361 - RR362
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
19 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 20

GroupVariable Number
1RR421 - RR422
1RR431 - RR432
1RR441
2RR442
2RR451
1RR501 - RR504
1RR521
2RR522
2RR526
1RR531
1RR551 - RR554
2RR555 - RR556
1RR561
2RR566
2RR701
2RR721 - RR724
2RR746 - RR748
2RR851 - RR856
2RR861 - RR862
2RR951 - RR952
1RS001 - RS002
1RS201
1RS211 - RS212
1RS221 - RS222
1RS231 - RS241
1RS251 - RS259
2RS263
1RS265 - RS268
1RS271 - RS276
1RS291 - RS292
1RS301 - RS305
2RS306
1RS311 - RS320
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
20 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 21

GroupVariable Number
2RS331 - RS333
1RS341 - RS342
1RS699
1RS701 - RS703
1RS711 - RS713
1RS721 - RS722
2RS731 - RS732
1RS741 - RS743
1RS751 - RS752
1RS761
2RS762
1RS771
2RS781 - RS782
2RS786
2RT001 - RT014
2RT021 - RT022
2RT031 - RT035
2RT041 - RT047
2RT061
2RT071 - RT075
2RT101 - RT103
2RT121
2RT131 - RT137
2RT151 - RT152
2RT161 - RT168
2RT401 - RT412
2RT431 - RT447
2RT451 - RT469
2RT471 - RT499
2RT501 - RT535
2RT551 - RT568
2RT571 - RT591
2RT601 - RT657
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
21 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 22

GroupVariable Number
2RT671 - RT673
2RT681 - RT682
2RT691 - RT699
2RT701 - RT704
2RT711 - RT717
2RT741 - RT757
2RT776 - RT777
2RT781 - RT784
2RT801 - RT803
2RT811 - RT814
2RT831 - RT837
2RT861 - RT864
2RT876 - RT880
2RT931 - RT932
2RT945 - RT949
2RT951 - RT955
2RT966 - RT967
2RU001 - RU006
2RU016 - RU017
2RU031 - RU032
2RU051 - RU052
2RU059 - RU062
2RU081 - RU083
2RU101 - RU102
2RU121 - RU132
2RU801 - RU809
2RU831 - RU841
2. Spares Affected
None.
B. Concurrent Requirements
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
22 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 23

C. Reason
Accomplishment of the inspections given in this service bulletin will make sure that cracks in the frame
supports, splice fittings, floor supports, forward and aft inner chords, and upper and lower web panels
of the Body Station (STA) 2598 bulkhead are found and repaired before the crack damage can have
an effect on flight safety. The horizontal stabilizer hinge fittings are attached to the STA 2598 bulkhead.
Cracks in the bulkhead splice fittings, frame supports, web, or inner chords that are not found and
repaired could extend with continued use of the airplane and adversely affect the structural integrity of
the bulkhead and the horizontal stabilizer support structure.
Eleven operators have told Boeing about cracks that were found in the aft inner chord of the STA 2598
bulkhead on 14 airplanes. In addition, three operators have also told Boeing about cracks that were
found in the forward inner chord of the STA 2598 bulkhead on three airplanes. These cracks were all
found near the upper corners of the cutout for the horizontal stabilizer rear spar. Refer to Appendix A
for more information about service history.
NOTE: Refer to Appendix A for service history data for the period between the original issue and
Revision 6 of this service bulletin.
After the release of Revision 6 of this service bulletin, an operator reported a crack found in the web
section of the bulkhead frame support where it is sandwiched between the upper splice fitting and the
aft inner chord. This crack was found (at 12,302 flight cycles) because the splice fitting was removed
to do a repair for a different crack found in the chord section of the frame support. Also, 1.8 inch and
1.6 inch cracks were found in the frame support upper splice fitting on airplanes with 12,302 and 13,728
flight cycles respectively. These cracks were found in the fillet radius of the splice fitting horizontal
flange where it connects to the upper shear deck. Also, 0.07 inch and 0.50 inch cracks were found in
the RS frame support lower splice fitting on airplanes with 10,409 and 19,203 flight cycles respectively.
Boeing Structural Item Interim Advisory (SIIA) 747-167 is related to this Service Bulletin.
Boeing Service Related Problem (SRP) 747/747OP-SRP-53-0106, 747/747OP-SRP-53-0316,
747-SRP-53-0343, and 747-SRP-53-0427  are related to this service bulletin.
Revision 7 is sent to expand the inspection given in this service bulletin as a result of crack findings
reported after the release of Revision 6. This revision extends the open hole HFEC inspection for cracks
to include more fastener holes common to the upper and lower splice fittings on both sides of the
bulkhead, plus some additional fastener holes adjacent to the lower splice fitting. This revision also
extends the surface HFEC inspection for cracks to include a fillet radius area on the upper splice fitting.
This expansion of the open hole and surface inspections is necessary to find cracks that could have
an effect on the structural integrity of the STA 2598 bulkhead. Revision 7 is also sent to identify/include
the modification given in service bulletin 747-53A2837 as a terminating action for the inspections given
in this service bulletin.
D. Description
Do open hole and surface high frequency eddy current (HFEC) inspections for cracks in the left and
right side frame support, splice fittings, forward and aft inner chords and floor supports. In addition, do
open hole and surface HFEC inspections for cracks in the bulkhead upper and lower webs near the
aft inner chord to shear deck connection.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
23 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 24

If no crack(s) are found, repeat the open hole and surface HFEC inspections, or alternatively, accomplish
a modification in accordance with Service Bulletin 747-53A2473 or 747-53A2837 . No further action is
required by this service bulletin after modification in accordance with Service Bulletin 747-53A2473 or
747-53A2837 .
If crack(s) are found in the aft inner chord only, accomplish the chord repair given in this service bulletin,
or alternatively, accomplish a modification in accordance with Service Bulletin 747-53A2473 or
747-53A2837 .
If a crack is found in the frame support, splice fitting, forward inner chord, or floor support, contact
Boeing for repair data and do the repair.
If a crack is found in the bulkhead upper web, accomplish the upper web repair given in this Service
Bulletin, or alternatively, accomplish a modification in accordance with Service Bulletin 747-53A2473
or 747-53A2837 .
If a crack is found in the bulkhead lower web, accomplish a modification in accordance with Service
Bulletin 747-53A2473 or 747-53A2837 , or contact Boeing for repair data and do the repair.
For Group 1 and group 2 airplanes, an interim modification is to be accomplished in accordance with
this service bulletin by the time given in Paragraph 1.E., Compliance if the modification given in Service
Bulletin 747-53A2473 or 747-53A2837  is not accomplished by that time.
After accomplishment of an inner chord repair, upper web repair, or interim modification, do
post-repair/modification inspections in accordance with this service bulletin.
NOTE: Refer to Appendix B for Revision 1-6 change information previously described in this Service
Bulletin.
Revision 6: More work is necessary on airplanes changed as shown in the original issue and revisions
1 thru 5 of this service bulletin. Open hole and surface high-frequency eddy current (HFEC) inspections
for cracks in the bulkhead upper and lower web panels are to be accomplished in accordance with this
revision.
Revision 7: More work is necessary on airplanes changed in accordance with previous revisions of this
service bulletin. Surface and open hole HFEC inspection for cracks at additional fastener locations
at/near the frame support upper and lower splice fittings is to be accomplished in accordance with this
revision.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
315, 316747-100, 747-100B, 747-100B
SUD, 747-200B, 747-200C,
747-200F, 747-300, 747SP,
747SR
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
24 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 25

Group 2:
Affected Maintenance Zones
ZoneModel
315, 316747-200B, 747-200C, 747-200F,
747-300, 747-400, 747-400D,
747-400F
Group 3:
Affected Maintenance Zones
ZoneModel
315, 316747-400, 747-400F
E. Compliance
Federal Aviation Administration (FAA) Airworthiness Directive AD 2010-14-07 and FAA Airworthiness
Directive AD 2004-07-22 R1 are related to this service bulletin.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive
related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times
given in this service bulletin mandatory.
Refer to the tables below to find the applicable compliance times. Different conditions (and corresponding
actions and compliance times) can apply to the left and right sides of the STA 2598 bulkhead.
Applicable Compliance Ta-
bles
Airplanes
1, 3Group 1,2
2, 3Group 3
NOTE: The inspection given in Compliance Table 1 and Table 2 below is divided into upper
and lower areas which are at/near the upper and lower frame support splices
respectively. The Interim modification (applicable to Group 1, 2 airplanes only), and
the inner chord and web repairs given in this service bulletin are for the upper area
only.
1.
2. Except where noted otherwise, the actions given in Table 1 and Table 2 are applicable
on both the left and right sides of the bulkhead.
3. The inspection given in this service bulletin has been expanded with revisions 4, 6,
and 7 to the service bulletin. In the tables below the inspection work added with each
of these revisions is given as a separate action with a compliance grace period
referenced to the date on the appropriate revision. The inspection actions are divided
in this manner for compliance specification purposes only.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
25 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 26

Group 1-2:
Table 1: Bulkhead Inspection, Repair and Modification - Group 1, 2 Airplanes
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
--The work given in this
service bulletin is not
necessary.
Bulkhead (Support Frame)
modification given in Boe-
ing service bulletin 747-
53A2473, 747-53-2473, or
747-53A2837  has been
done.
Refer to Compli-
ance Table 3.
Refer to Compli-
ance Table 3.
UPPER AREA:
Do applicable post-re-
pair/modification actions
given in Compliance Ta-
ble 3. (a)
Interim Modification done
in accordance with this
service bulletin, or, aft inner
chord and/or upper web
repair done in accordance
with this service bulletin. 3,000 flight cycles
(a) (b)
Before 6,000 total
flight cycles, or if it
occurs later, within
3,000 flight cycles
after the date on
the respective ser-
vice bulletin revi-
sion.
LOWER AREA:
Do the open hole and
surface HFEC crack in-
spections added with Re-
vision 6 and Revision 7 to
this service bulletin in ac-
cordance with Accom-
plishment Instructions
3.B., Part 1. (f) (g) (a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
26 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 27

Group 1-2:
Table 1: Bulkhead Inspection, Repair and Modification - Group 1, 2 Airplanes
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
1,500 flight cycles
(a) (b) (c)
Before 6,000 total
flight cycles or
within 500 flight cy-
cles after the date
on Revision 2 of
this service bul-
letin, whichever
occurs later.
UPPER AREA:
Do the forward side Sur-
face HFEC inspection for
cracks in accordance with
Accomplishment Instruc-
tions 3.B., Part 1. (d) (a)
Bulkhead (Support Frame)
modification given in Boe-
ing service bulletin 747-
53A2473, 747-53-2473, or
747-53A2837  has NOT
been done and an Interim
modification or aft inner
chord repair has not been
done. Before 6,000 total
flight cycles, or if it
occurs later, within
1,500 flight cycles
after the date on
the respective ser-
vice bulletin revi-
sion.
UPPER AREA:
Do the open hole and
surface HFEC crack in-
spections added with Re-
vision 4, Revision 6 and
Revision 7 to this service
bulletin in accordance
with Accomplishment In-
structions 3.B., Part 1. (e)
(f) (g) (a)
3,000 flight cycles
(a) (b) (c)
Before 6,000 total
flight cycles, or if it
occurs later, within
3,000 flight cycles
after the date on
the respective ser-
vice bulletin revi-
sion.
LOWER AREA:
Do the open hole and
surface HFEC crack in-
spections added with Re-
vision 6 and Revision 7 to
this service bulletin in ac-
cordance with Accom-
plishment Instructions
3.B., Part 1. (f) (g) (a)
-Before 12,000 total
flight cycles or
within 1,500 flight
cycles after the
date on Revision 4
of this service bul-
letin, whichever
occurs later.
Do the Interim Modifica-
tion in accordance with
Accomplishment Instruc-
tions 3.B., Part 2. (a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
27 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 28

Group 1-2:
Table 1: Bulkhead Inspection, Repair and Modification - Group 1, 2 Airplanes
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further
flight.
Repair in accordance with
Accomplishment Instruc-
tions 3.B., Part 1 and do
applicable post-repair ac-
tions given in Compliance
Table 3.
Crack in the aft inner chord
and/or a crack in the upper
web that is contained within
the allowed trim out area.
Or
Do the modification given
in Boeing service bulletin
747-53A2473 or 747-
53A2837 . (a)
-Before further
flight.
Contact Boeing for repair
data and do the repair.
Crack in the splice fitting,
frame support, forward in-
ner chord, or floor support
Or
Crack in the upper web that
extends outside the al-
lowed trim area.
-Before further
flight.
Do the modification given
in Boeing service bulletin
747-53A2473 or 747-
53A2837. (a)
Lower web has a crack.
Or
Contact Boeing for repair
data and do the repair.
(a) An alternative action is to accomplish the modification given in Boeing service bulletin
747-53A2473  or 747-53A2837 . No further action is required by this service bulletin after
modification in accordance with Boeing service bulletin 747-53A2473  or 747-53A2837 .
Federal Aviation Administration (FAA) Airworthiness Directive 2010-14-07 requires that
the modification given in Boeing service bulletin 747-53A2473 be accomplished before
20,000 total flight cycles, or within 18 months after the effective date of the AD, whichever
occurs later. The modification given in Boeing service bulletin 747-53A2837 has been
approved as an AMOC (an alternative to the modification given in Boeing service bulletin
747-53A2473) for AD 2010-14-07.
(b) Repair or modification actions and associated post-repair/modification inspections (specified
in this table) are necessary if there is a crack in any of the parts inspected; thus, repeats
of the inspections given in Accomplishment Instructions 3.B., Part 1 are applicable only if
there are no crack indications with the last inspection of the parts.
(c) As an alternative to repeat inspections at the given intervals, accomplish the Interim
Modification and do post-modification inspections in accordance with Table 3.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
28 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 29

Group 1-2:
Table 1: Bulkhead Inspection, Repair and Modification - Group 1, 2 Airplanes
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
(d) The forward side inspection is a surface HFEC for cracks in the area of the frame support
upper splice. The parts inspected are the forward and aft inner chords, upper splice fitting
and frame support.
(e) The inspection work added with Revision 4 is in the upper area only and includes both
surface and open hole HFEC inspection for cracks in the area of the frame support upper
splice. Surface inspection is done over an additional area of the aft inner chord. Open hole
inspection is done through the forward and aft inner chords, frame support, upper splice
fitting, upper web, and the floor support.
(f) The inspection work added with Revision 6 includes work in both upper and lower areas.
In the upper area: Surface HFEC inspection for web cracks in the area of the frame support
upper splice. In the lower area: Surface and open hole HFEC inspection for cracks in the
area of the frame support lower splice on the LEFT side of the bulkhead only. The surface
inspection is done over the web and the open hole inspection is done through the forward
and aft inner chords, web, splice fitting and floor support. The inspection work added with
Revision 6 is noted as such in the work instructions.
(g) The inspection work added with Revision 7 includes both surface and open hole HFEC
inspection for cracks in the area of the frame support upper and lower splices. The expand-
ed lower area inspection is to be done on both sides of the bulkhead. In the upper area:
Open hole inspection through the forward and aft inner chords, frame support, web, and
upper splice fitting. In the lower area: Open hole inspection through the forward and aft
inner chords, frame support, web, and lower splice fitting. The inspection work added with
Revision 7 is noted as such in the work instructions.
Group 3:
Table 2: Bulkhead Inspection, Repair and Modification - Group 3 Airplanes
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
--The work given in this
service bulletin is not
necessary.
Bulkhead (Support Frame)
modification given in Boe-
ing service bulletin 747-
53A2473, 747-53-2473, or
747-53A2837  has been
done.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
29 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 30

Group 3:
Table 2: Bulkhead Inspection, Repair and Modification - Group 3 Airplanes
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
Refer to Compli-
ance Table 3.
Refer to Compli-
ance Table 3.
UPPER AREA:
Do the applicable post-
repair actions given in
Compliance Table 3. (a)
Aft inner chord and/or up-
per web repair done in ac-
cordance with this service
bulletin.
3,000 flight cycles
(a) (b)
Before 16,000 total
flight cycles, or if it
occurs later, within
3,000 flight cycles
after the date on
the respective ser-
vice bulletin revi-
sion.
LOWER AREA:
Do the open hole and
surface HFEC crack in-
spections added with Re-
vision 6 and Revision 7 to
this service bulletin in ac-
cordance with Accom-
plishment Instructions
3.B., Part 1. (e) (f) (a)
1,500 flight cycles
(a) (b)
Before 16,000 total
flight cycles or
within 500 flight cy-
cles after the date
on Revision 2 of
this service bul-
letin, whichever
occurs later.
UPPER AREA:
Do the forward side sur-
face HFEC Inspection for
cracks in accordance with
Accomplishment Instruc-
tions 3.B., Part 1. (c) (a)
Bulkhead (Support Frame)
modification given in Boe-
ing service bulletin 747-
53A2473, 747-53-2473, or
747-53A2837  has NOT
been done and an aft inner
chord repair has not been
done.
Before 16,000 total
flight cycles, or if it
occurs later, within
1,500 flight cycles
after the date on
the respective ser-
vice bulletin revi-
sion.
UPPER AREA:
Do the open hole and
surface HFEC crack in-
spections added with Re-
vision 4, Revision 6, and
Revision 7 to this service
bulletin in accordance
with Accomplishment In-
structions 3.B., Part 1. (d)
(e) (f) (a)
3,000 flight cycles
(a) (b)
Before 16,000 total
flight cycles, or if it
occurs later, within
3,000 flight cycles
after the date on
the respective ser-
vice bulletin revi-
sion.
LOWER AREA:
Do the open hole and
surface HFEC crack in-
spections added with Re-
vision 6 and Revision 7 to
this service bulletin in ac-
cordance with Accom-
plishment Instructions
3.B., Part 1. (e) (f) (a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
30 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 31

Group 3:
Table 2: Bulkhead Inspection, Repair and Modification - Group 3 Airplanes
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further
flight.
Repair in accordance with
Accomplishment Instruc-
tions 3.B., Part 1 and do
applicable post-repair ac-
tions given in Compliance
Table 3.
Crack in the aft inner chord
and/or a crack in the upper
web that is contained within
the allowed trim out area.
Or
Do the modification given
in Boeing service bulletin
747-53A2473 or 747-
53A2837 . (a)
-Before further
flight.
Contact Boeing for repair
data and do the repair.
Crack in the splice fitting,
frame support, forward in-
ner chord, or floor support
Or
Crack in the upper web that
extends outside the al-
lowed trim area.
-Before further
flight.
Do the modification given
in Boeing service bulletin
747-53A2473 or 747-
53A2837 (a)
Lower web has a crack.
Or
Contact Boeing for repair
data and do the repair.
(a) A alternative action is to accomplish the modification given in Boeing service bulletin 747-
53A2473  or 747-53A2837 . No further action is required by this service bulletin after
modification in accordance with Boeing service bulletin 747-53A2473  or 747-53A2837 .
Federal Aviation Administration (FAA) Airworthiness Directive 2010-14-07 requires that
the modification given in Boeing service bulletin 747-53A2473 be accomplished before
20,000 total flight cycles, or within 18 months after the effective date of the AD, whichever
occurs later. The modification given in Boeing service bulletin 747-53A2837 has been
approved as an AMOC (an alternative to the modification given in Boeing service bulletin
747-53A2473) for AD 2010-14-07 .
(b) Repair or modification actions and associated post-repair/modification inspections (specified
in this table) are necessary if there is a crack in any of the parts inspected; thus, repeats
of the inspections given in Accomplishment Instructions 3.B., Part 1 are applicable only if
there are no crack indications with the last inspection of the parts.
(c) The forward side Inspection is a surface HFEC for cracks in the area of the frame support
upper splice. The parts inspected are the forward and aft inner chords, upper splice fitting
and frame support.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
31 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 32

Group 3:
Table 2: Bulkhead Inspection, Repair and Modification - Group 3 Airplanes
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
(d) The inspection work added with Revision 4 is in the upper area only and includes both
surface and open hole HFEC inspection for cracks in the area of the frame support upper
splice. Surface inspection is done over an additional area of the aft inner chord. Open hole
inspection is done through the forward and aft inner chords, frame support, upper splice
fitting, upper web, and the floor support. The inspection work added with Revision 4 is
noted as such in the work instructions.
(e) The inspection work added with Revision 6 includes work in both upper and lower areas.
In the upper area: Surface HFEC inspection for web cracks in the area of the frame support
upper splice. In the lower area: Surface and open hole HFEC inspection for cracks in the
area of the frame support lower splice on the LEFT side of the bulkhead only. The surface
inspection is done over the web and the open hole inspection is done through the forward
and aft inner chords, web, splice fitting and floor support. The inspection work added with
Revision 6 is noted as such in the work instructions.
(f) The inspection work added with Revision 7 includes both surface and open hole HFEC
inspection for cracks in the area of the frame support upper and lower splices. With the
Revision 7 inspection, the expanded lower area inspection is done on both sides of the
bulkhead. In the upper area: Open hole inspection through the forward and aft inner chords,
frame support, web, and upper splice fitting. In the lower area: Open hole inspection
through the forward and aft inner chords, frame support, web, and lower splice fitting. The
inspection work added with Revision 7 is noted as such in the work instructions.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
32 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 33

Table 3: Bulkhead Post-Repair Inspection or Post-Interim Modification Inspection
Repeat Interval
(Not to Exceed)
Compliance TimeAction (h)Condition
1,500 flight cycles
(g)
Within 1,500 flight cycles after the
last forward side inspection.
Do the forward side Sur-
face HFEC inspection for
cracks in accordance with
Accomplishment Instruc-
tions 3.B., Part 3.
Interim Modification or aft
inner chord repair done in
accordance with this ser-
vice bulletin.
No upper web repair.
(d) (b) (a)
1,500 flight cycles
(g)
Within 6,000 flight cycles after ac-
complishment of the chord repair
or Interim Modification.
Do surface and open hole
HFEC inspections for
cracks in the re-
paired/modified area of
the bulkhead in accor-
dance with Accomplish-
ment Instructions 3.B.,
Part 3. (a)
1,500 flight cycles
(g)
Within 6,000 flight cycles after ac-
complishment of the chord repair
or Interim Modification, or if it is
later, within 1,500 flight cycles af-
ter the date on the respective ser-
vice bulletin revision.
Do the post-modifica-
tion/repair inspection
work added with Revision
6 and Revision 7 to this
service bulletin in the re-
paired/modified area of
the bulkhead in accor-
dance with Accomplish-
ment Instructions 3.B.,
Part 1. (e) (f) (a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
33 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 34

Table 3: Bulkhead Post-Repair Inspection or Post-Interim Modification Inspection
Repeat Interval
(Not to Exceed)
Compliance TimeAction (h)Condition
1,500 flight cycles
(g)
Within 1,500 flight cycles after the
last forward side inspection.
Do the forward side Sur-
face HFEC inspection for
cracks in accordance with
Accomplishment Instruc-
tions 3.B., Part 3.
Interim Modification or aft
inner chord repair plus up-
per web repair done in ac-
cordance with this service
bulletin. (c)
(d) (b) (a)
1,500 flight cycles
(g)
Within 3,000 flight cycles after ac-
complishment of the chord and/or
web repair.
Do surface and open hole
HFEC inspections for
cracks in the re-
paired/modified area of
the bulkhead in accor-
dance with Accomplish-
ment Instructions 3.B.,
Part 3. (a)
1,500 flight cycles
(g)
Within 3,000 flight cycles after ac-
complishment of the chord repair
or Interim Modification, or if it is
later, within 1,500 flight cycles af-
ter the date on the respective ser-
vice bulletin revision.
Do the post-modifica-
tion/repair inspection
work added with Revision
6 and Revision 7 to this
service bulletin in the re-
paired/modified area of
the bulkhead in accor-
dance with Accomplish-
ment Instructions 3.B.,
Part 1. (e) (f) (a)
-Before further flight.Do the modification given
in Boeing service bulletin
747-53A2473 or 747-
53A2837  (a)
Crack in the aft inner
chord.
Or
Contact Boeing for repair
data and do the repair.
-Before further flight.Contact Boeing for repair
data and do the repair.
Crack in the upper web and
crack extends outside the
allowed trim out area.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
34 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 35

Table 3: Bulkhead Post-Repair Inspection or Post-Interim Modification Inspection
Repeat Interval
(Not to Exceed)
Compliance TimeAction (h)Condition
-Before further flight.Remove the existing re-
pair/modification parts
and do an upper web re-
pair in accordance with
Accomplishment Instruc-
tions 3.B., Part 4. Contin-
ue post-repair inspections
as given above in this ta-
ble. (a)
Crack in the upper web and
crack is contained within
the allowed trim out area.
Or
Do the modification given
in Boeing service bulletin
747-53A2473 or 747-
53A2837 (a)
Or
Contact Boeing for repair
data and do the repair.
-Before further flight.Contact Boeing for repair
data and do the repair.
Crack in the splice fitting,
frame support, forward in-
ner chord, or floor support.
(a) An alternative action is to accomplish the modification given in Boeing service bulletin 747-53A2473 or
747-53A2837 . No further action is required by this service bulletin after modification in accordance with
Boeing service bulletin.
Federal Aviation Administration (FAA) Airworthiness Directive AD 2010-14-07 requires the modification
given in Boeing service bulletin 747-53A2473 be accomplished before 20,000 total flight cycles, or within
18 months after the effective date of the AD, whichever occurs later. The modification given in Boeing
service bulletin 747-53A2837 has been approved as an AMOC (an alternative to the modification given
in Boeing service bulletin 747-53A2473) for AD 2010-14-07.
(b) The SRM refers to this Service Bulletin for continued (post-repair) inspection in 'the non-repaired areas."
This inspection of the forward side of the bulkhead is the inspection in the non-repaired areas.
(c) This condition is for an upper web repair installed as a stand alone repair, or as a replacement for a
previously installed inner chord repair or a previously installed Interim Modification. For the condition
where the upper web repair is a replacement repair, the given compliance times refer to when the replace-
ment web repair was accomplished.
(d) The forward side Inspection is a surface HFEC for cracks in the area of the frame support upper splice.
The parts inspected are the forward and aft inner chords, upper splice fitting and frame support.
(e) The post-modification/repair inspection work added with Revision 6 is a Surface HFEC inspection for
cracks in the web and an additional area of the aft inner chord. This work is noted to be associated with
Revision 6 in the work instructions.
(f) The post-modification/repair inspection work added with Revision 7 includes open hole inspection through
the forward and aft inner chords, frame support, web, and upper splice fitting. This work is noted to be
associated with Revision 7 in the work instructions.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
35 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 36

Table 3: Bulkhead Post-Repair Inspection or Post-Interim Modification Inspection
Repeat Interval
(Not to Exceed)
Compliance TimeAction (h)Condition
(g) Repair or modification actions (specified in this table) are necessary if there is a crack in any of the parts
inspected; thus, repeats of the inspections given in Accomplishment Instructions 3.B., Part 3 are applicable
only if there are no crack indications with the last inspection of the parts.
(h) In addition to the post-repair/modification inspections given in this table, lower area inspections ( in the
area of the frame support lower splice) are to continue in accordance with Table 1 or 2 as applicable
until a bulkhead modification is accomplished in accordance with Boeing service bulletin 747-53A2473
or 747-53A2837 .
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
In addition, the Manager of the FAA Seattle Aircraft Certification Office (ACO) approves the
accomplishment of the inspections, repairs and interim modification with the corresponding compliance
times specified in Tables 1, 2 and 3, under paragraph 1.E., "Compliance," of SB 747-53A2427, Revision
7 as an AMOC to the inspections, repairs and interim modification at the STA 2598 bulkhead required
by paragraphs (i), (j), (o), (s), (t), (u) and (v) of AD 2010-14-07. This AMOC is valid only for areas where
inspections, repairs or interim modification are done in accordance with this SB. When this SB specifies
contacting Boeing for repair data, the repair data must be approved by the FAA in accordance with
paragraph (x) of the AD. All provisions of AD 2010-14-07 that are not specifically referenced in this
paragraph remain fully applicable and must be complied with accordingly.
In addition, the Manager of the FAA Seattle Aircraft Certification Office (ACO) approves the
accomplishment of the inspections, repairs and interim modification with the corresponding compliance
times specified in Tables 1, 2 and 3, under paragraph 1.E., "Compliance," of SB 747-53A2427, Revision
7 as an AMOC to the inspections, repairs and interim modification at the STA 2598 bulkhead required
by paragraphs (h) and (i) of AD 2004-07-22 R1 for the areas inspected by Boeing 747 Supplemental
Structural Inspection Document (SSID) D6-35022, Revision G, Significant Structural Items F-49B,
F-49C, and F-49J. This AMOC only applies to the areas that are inspected as given in this service
bulletin. When this service bulletin specifies contacting Boeing for repair, rework, or modification data,
the data must be approved by the FAA in accordance with paragraph (l) of the AD. All provisions of
AD 2004-07-22 R1 that are not specifically referenced in this paragraph remain fully applicable and
must be complied with accordingly.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
36 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 37

G. Manpower
The table below shows an estimate of the task hours necessary to do this inspection for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
— Time to adjust to the workplace
— Time to schedule the work
— Time to inspect the work
— Time to cure the materials
— Time to make the parts
— Time to find the tools.
Elapsed HoursTask HoursNumber of Per-
sons
Task
0.750.751Open Access
24.2548.502Inspect
1.753.502Interim Modification
0.750.751Close Access
27.553.5TOTAL FOR EACH AIRPLANE
Note: More time will be required if cracks are found and repair(s) are installed.
H. Weight and Balance Changes
NOTE: Weight and balance changes reflect an interim modification installation on the left and right
side of the airplane.
Group 1
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+ 2218.0+ 1.0747SP/SR
Group 2, 3
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+ 2598+ 1.0747-100 / -100B / -
100BSUD / -200B /
200C / -300 / -400 /
-400D
+ 2598+ 1.0747-200F / -400F
I. Electrical Load Data
Not changed.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
37 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 38

J. References
1. Existing Data:
a. Engineering Change Memo PRR 85901-103RS
b. Service Related Problem (SRP) 747/747OP-SRP-53-0106
c. Service Related Problem (SRP) 747/747OP-SRP-53-0316
d. Service Related Problem (SRP) 747-SRP-53-0343
e. 747 Structural Item Interim Advisory 747-167
f. Boeing Parts Standards Document D-590
g. Boeing Service Bulletin 747-53-2473, 747-53A2473, 747-53A2837
h. Boeing Service Related Problem (SRP) 747-SRP-53-0427
i. Federal Aviation Administration (FAA) Airworthiness Directive (AD) AD 2010-14-07, AD
2004-07-22 R1
j. Standard Overhaul Practices Manual (SOPM) 20-10-03, 20-20-02, 20-41-02, 20-43-01,
20-43-03
k. 747 Non-Destructive Testing (NDT) Manual Part 6, 51-00-00
l. 747-100/200/300 Aircraft Maintenance Manual (AMM) 27-41-02
m. 747-100/200/300 Structural Repair Manual (SRM) 53-10-04
n. 747-400 Aircraft Maintenance Manual (AMM) 27-41-02
o. 747-400 Structural Repair Manual (SRM) 53-80-08
p. 747-SP Structural Repair Manual (SRM) 53-19-02
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
BULKHEAD INSTL - UPPER LOBE, STA 259865B02502
BULKHEAD INSTL - LOWER LOBE, STA 259865B02505
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
38 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 39

K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS. DTI requirements for the structure affected
are contained in Paragraph 1.E., Compliance of this service bulletin.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
39 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 40

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
40 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT
BLANK PAGE

### Page 41

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes, inspection and/or repairs
given in this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts:
None.
2. Parts and Materials Supplied by the Operator:
Replacement fasteners for open hole inspection locations are identified in FIGURE 2.
The parts, fasteners and materials needed to accomplish the interim modification on a group 1
airplane are identified in the step and fastener tables of FIGURE 7. The parts and fasteners shown
in the figure are needed to modify each side of the bulkhead.
The parts, fasteners and materials needed to accomplish the interim modification on a group 2 or
group 3 airplane are identified in the step and fastener tables of FIGURE 8. The parts and fasteners
shown in the figure are needed to modify each side of the bulkhead.
See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier
data.
NOTE: Boeing plans to provide kit data in an Information Notice or a future revision to this service
bulletin.
3. Parts Modified and Reidentified:
None.
4. Parts Removed and Not Replaced:
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
41 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 42

F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
42 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 43

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque limits to tighten nuts and bolts are in SRM Chapter 51
4. Use the approved fastener and process material substitutions in accordance with
SRM Chapter 51.
5. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51.
6. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
7. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
8. Boeing Service Letter 747-SL-747-SL-51-048, Damage Reporting and Repair
Plan/Design Guidelines, is an acceptable procedure to request information from
Boeing for additional structural repair instructions. The Service Letter describes what
information must be provided to Boeing before a structural repair can be provided.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
43 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 44

9. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
10. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
11. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
12. Unless otherwise noted, all fasteners are to be installed with the head on the near
side at fastener symbol locations.
13. Federal Aviation Administration (FAA) Airworthiness Directive AD 2010-14-07 requires
the support frame modification given in Boeing service bulletin 747-53A2473 to be
accomplished before the accumulation of 20,000 total flight cycles or within 18 months
after the effective date of the AD, whichever occurs later. The modification given in
Boeing service bulletin 747-53A2837 has been approved as an AMOC (to the
modification given in Boeing service bulletin 747-53A2473) for AD 2010-14-07.
B. WORK INSTRUCTIONS
PART 1: INSPECTION AND REPAIR
1. Remove electrical and hydraulic power. Refer to 747-100/200/300 AMM 27-41-02 or 747-400 AMM
27-41-02 as an accepted procedure.
2. For access to the aft side of the of the STA 2598 bulkhead, open APU Battery Access Door 315A.
Open Horizontal Stabilizer Jackscrew Access Door 312A to get access to the forward side of the
STA 2598 bulkhead through the access holes in the bulkheads at STA 2484, 2502, and 2517.
CAUTION: DO NOT USE THE JACK POINT AT BODY STATION 2596 (PRIMARY TAIL JACK
POINT III) DURING OPEN HOLE HFEC INSPECTIONS OR INSTALLATION OF
REPAIRS.
3. Accomplish open hole and surface high frequency eddy current (HFEC) inspections for cracks in
the forward and aft inner chords, frame supports, splice fittings, floor supports, and upper and
lower web panels in accordance with FIGURE 2 and Paragraph 1.E., Compliance.  Do these
inspections on the left and right sides of the bulkhead.
NOTE: Some of the work steps given in Figure 2 have a note stating that the inspection work
given in that step was added with a revision (revision 4, 6, or 7) to this service bulletin.
These notes are included to link the inspection work given in that step to the applicable
compliance data that includes a grace period referenced to the date on the respective
revision.
4. If a crack is indicated at a fastener hole with the open hole inspection, an attempt can be made to
remove the crack by increasing the fastener hole diameter in accordance with FIGURE 2. Repeat
the open hole inspection in accordance with FIGURE 2 after the hole is oversized.
If the inspections given in FIGURE 2 are accomplished with no crack indications (following hole
oversize and reinspection if/where necessary), go to step 5 of Part 1 below.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
44 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 45

If a crack is indicated by an inspection given in FIGURE 2, make a repair or modification in
accordance with the table below and Paragraph 1.E., Compliance.
Repair/Modification AlternativesCrack Description/Location
Bulkhead (Support Frame) modification (a)Aft inner chord crack only.
Chord repair (b)
Bulkhead (Support Frame) modification (a)Upper web crack only and crack is contained
within the maximum allowed trim out area. Upper web repair (c)
Bulkhead (Support Frame) modification (a)Aft inner chord crack plus upper web crack, and
web crack is contained within the maximum al-
lowed trim out area.
Chord trim plus upper web repair (f)
Special Repair (d)
Bulkhead (Support Frame) modification (e)Lower web crack.
Special Repair (d)
Special repair (d)Crack in the Splice fitting, frame support, forward
inner chord, floor support, or upper web crack
that extends outside the maximum allowed trim
area.
(a) Accomplish a bulkhead (Support Frame) modification in accordance with 747-53A2473 or
747-53A2837 . No further action is required by this service bulletin after the modification is
accomplished. Federal Aviation Administration (FAA) Airworthiness Directive 2010-14-07 re-
quires the modification given in Boeing service bulletin 747-53A2473. The modification given
in Boeing service bulletin 747-53A2837 has been approved as an AMOC (an alternative to
the modification given in Boeing service bulletin 747-53A2473) for AD 2010-14-07.
(b) If a crack is found in the aft inner chord only (no cracks found in other components), accomplish
a repair in accordance with 747-100/200/300 SRM 53-10-04 Figure 72, 747-SP SRM 53-19-
02, Figure 41, 747-400 SRM 53-80-08, Repair 11, or 747-400F SRM 53-80-08, Repair 11 as
applicable and Paragraph 1.E., Compliance. Do post-repair inspections in accordance with
Paragraph 3.B., Work Instructions, Part 3.
(c) Accomplish the upper web repair in accordance with Paragraph 3.B., Work Instructions, Part
4 and Paragraph 1.E., Compliance. Do post-repair inspections in accordance with Paragraph
3.B., Work Instructions, Part 3.
(d) Contact Boeing for repair data and do the repair.
(e) A lower web crack repair can be accomplished with bulkhead (Support Frame) modification
in accordance with 747-53A2473 or 747-53A2837.
(f) Remove the crack from the aft inner chord and inspect the chord to make sure that the crack
is removed in accordance with 747-100/200/300 SRM 53-10-04 Figure 72, 747-SP SRM 53-
19-02, Figure 41, 747-400 SRM 53-80-08, Repair 11, or 747-400F SRM 53-80-08, Repair
11 as applicable. After trim of the chord, accomplish a web repair in accordance with Paragraph
3.B., Work Instructions, Part 4 and Paragraph 1.E., Compliance. Do post-repair inspections
in accordance with Paragraph 3.B., Work Instructions, Part 3.
5. If the inspections given in FIGURE 2 are accomplished with no crack indications (following hole
oversize and reinspection if/where necessary), install fasteners at the open hole inspection locations
in accordance with FIGURE 2. Repeat the surface and open hole HFEC inspections in accordance
with Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
45 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 46

As an alternative to repeat inspections, accomplish bulkhead (Support Frame) modification in
accordance with 747-53A2473 or 747-53A2837 . No further action is required by this service
bulletin after the bulkhead modification is accomplished.
6. For Group 1, 2 airplanes that do not have the bulkhead modification, accomplish the interim
modification in accordance with Paragraph 3.B., Work Instructions, Part 2 by the time given in
Paragraph 1.E., Compliance. It is not necessary to accomplish this interim modification on the side
of the bulkhead where a chord repair or an upper web repair has been accomplished in accordance
with this service bulletin. After accomplishment of the interim modification, do post-modification
inspections in accordance with Paragraph 3.B., Work Instructions, Part 3.
Group 1-2:
PART 2: INTERIM MODIFICATION
CAUTION: DO NOT USE THE JACK POINT AT BODY STATION 2596 (PRIMARY TAIL JACK
POINT III) DURING INSTALLATION OF INTERIM MODIFICATION.
1. Accomplish the interim modification where necessary in accordance with Paragraph 1.E.,
Compliance and FIGURE 7 (Group 1 airplanes) or FIGURE 8 (Group 2, 3 airplanes) as applicable.
Accomplish post-modification inspections in accordance with Paragraph 1.E., Compliance and
Paragraph 3.B., Work Instructions, Part 3.
PART 3: POST- REPAIR OR POST- INTERIM MODIFICATION INSPECTION
CAUTION: DO NOT USE THE JACK POINT AT BODY STATION 2596 (PRIMARY TAIL JACK
POINT III) DURING OPEN HOLE HFEC INSPECTIONS.
1. After a repair is accomplished in accordance with Part 1 or an interim modification is accomplished
in accordance with Part 2, do forward side surface HFEC inspections for cracks in the bulkhead
forward inner chord, splice fitting and frame support in accordance with FIGURE 6 and Paragraph
1.E., Compliance.
After a repair is accomplished in accordance with Part 1 or an interim modification is accomplished
in accordance with Part 2, do open hole and surface high frequency eddy current (HFEC) inspections
for cracks in the modified area of the bulkhead in accordance with FIGURE 5 and Paragraph 1.E.,
Compliance.
NOTE: Some of the work steps given in Figure 5 have a note stating that the inspection work
given in that step was added with a revision (revision 6 or 7) to this service bulletin. These
notes are included to link the inspection work given in that step to the applicable
compliance data that includes a grace period referenced to the date on the respective
revision.
Continue inspections of the lower web in accordance with FIGURE 2 and Paragraph 1.E.,
Compliance.
As an alternative to the above inspections, accomplish a bulkhead (Support Frame) modification
in accordance with 747-53A2473 or 747-53A2837. No further action is required by this service
bulletin after the bulkhead modification is accomplished.
2. If/where a crack is indicated with the above post-repair/interim modification inspections, accomplish
a repair or modification in accordance with the table below and Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
46 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 47

Repair/Modification AlternativesCrack Description/Location
Bulkhead (Support Frame) modification (a)Aft inner chord crack or lower web crack.
Special repair (c)
Special repair (c)Crack in the Splice fitting, frame support, forward
inner chord, floor support.
Bulkhead (Support Frame) modification(a)Upper web crack that is within the maximum al-
lowed trim out area. Upper web repair (b)
Special repair (c)
Special repair (c)Upper web crack that is outside of the maximum
allowed trim out area.
(a) Accomplish bulkhead (Support Frame) modification in accordance with 747-53A2473 or 747-
53A2837 . No further action is required by this service bulletin after the modification is accom-
plished. Federal Aviation Administration (FAA) Airworthiness Directive 2010-14-07 requires
the modification given in Boeing service bulletin 747-53A2473. The modification given in
Boeing service bulletin 747-53A2837 has been approved as an AMOC (an alternative to the
modification given in Boeing service bulletin 747-53A2473) for AD 2010-14-07.
(b) Remove the existing repair/modification parts and accomplish an upper web repair in accor-
dance with Paragraph 3.B., Work Instructions, Part 4. Continue post-repair inspections as
given above in this table.
(c) Contact Boeing for repair data and do the repair.
PART 4: UPPER WEB REPAIR
1. Accomplish an upper web repair if necessary/applicable as given below:
Group 1, Configuration 1:
Remove the crack from the upper web in accordance with FIGURE 4. The upper web repair is
applicable only if the web crack is contained within the maximum allowed trim out area. After the
web is trimmed and inspected in accordance with FIGURE 4, complete the upper web repair in
accordance with FIGURE 7. Following the upper web repair, do post-repair open hole and surface
high frequency eddy current (HFEC) inspections in accordance with Paragraph 3.B., Work
Instructions, Part 3, and Paragraph 1.E., Compliance.
If the web crack extends outside the maximum allowed trim out area, contact Boeing for repair
data and do the repair.
Group 1, Configuration 2:
Remove the existing repair/modification parts and remove the crack from the upper web in
accordance with FIGURE 4. The upper web repair is applicable only if the web crack is contained
within the maximum allowed trim out area. After the web is trimmed and inspected in accordance
with FIGURE 4, complete the upper web repair in accordance with FIGURE 9. Following the upper
web repair, do post-repair open hole and surface high frequency eddy current (HFEC) inspections
in accordance with Paragraph 3.B., Work Instructions, Part 3, and Paragraph 1.E., Compliance.
If the web crack extends outside the maximum allowed trim out area, contact Boeing for repair
data and do the repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
47 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 48

Group 2-3, Configuration 1:
Remove the crack from the upper web in accordance with FIGURE 4. The upper web repair is
applicable only if the web crack is contained within the maximum allowed trim out area. After the
web is trimmed and inspected in accordance with FIGURE 4, complete the upper web repair in
accordance with FIGURE 8. Following the upper web repair, do post-repair open hole and surface
high frequency eddy current (HFEC) inspections in accordance with Paragraph 3.B., Work
Instructions, Part 3, and Paragraph 1.E., Compliance.
If the web crack extends outside the maximum allowed trim out area, contact Boeing for repair
data and do the repair.
Group 2-3, Configuration 2:
Remove the existing repair/modification parts and remove the crack from the upper web in
accordance with FIGURE 4. The upper web repair is applicable only if the web crack is contained
within the maximum allowed trim out area. After the web is trimmed and inspected in accordance
with FIGURE 4, complete the upper web repair in accordance with FIGURE 10. Following the
upper web repair, do post-repair open hole and surface high frequency eddy current (HFEC)
inspections in accordance with Paragraph 3.B., Work Instructions, Part 3, and Paragraph 1.E.,
Compliance.
If the web crack extends outside the maximum allowed trim out area, contact Boeing for repair
data and do the repair.
PART 5: RESTORATION
1. Close all access doors that were opened for access to the STA 2598 bulkhead.
2. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7: July 19, 2013
48 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 49 (OCR)

BOEING SERVICE BULLETIN 747-53A2427
ALERT  ALERT
THIS FIGURE IS DELETED.
INFORMATION IS NOW CONTAINED IN
PARAGRAPH 1.E., COMPLIANCE.
1423714
FIGURE 1: DELETED
(SHEET 1 OF 1)
Original Issue: December 17, 1998  Revision / July 19, 2013  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2427
Work - See page 1 for details.  49 of 126

### Page 50 (OCR)

BOEING SERVICE BULLETIN 747-53A2427
ALERT  ALERT
STA
2598
FORWARD SIDE
SURFACE
INSPECTION  STA
SEE C  2598
SEE
UPPER
INSPECTION
AREA
HORIZONTAL
FORWARD
STABILIZER
CHORD
FRAME
SUPPORT
FRAME
SUPPORT
SEE I
AFT INNER CHORD
LOWER
INSPECTION
AREA
> FWD
FORWARD
CHORD
S64517
FIGURE 2: INSPECTION
(SHEET 1 OF 10)
Original Issue: December 17, 1998
Revision 7 July 19, 2013  Export Controlled ECCN: 9E991 - BOEING  747-53A2427
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  50 of 126

### Page 51 (OCR)

BOEING SERVICE BULLETIN 747-53A2427
ALERT  ALERT
FORWARD INNER CHORD
•AFT INNER CHORD
BULKHEAD
UPPER
WEB
3 125  1X9X25  X26
Tro  • BULKHEAD  UPPER WEB
- 3.8  FLOOR
SUPPORT
2.00
UPPER
SPLICE  TYPICAL
FITTING
WEB
CRACK
0425 26
05 25 26  stro
CHORD  INSPECTION
AREA
AFT  UP
INNER  WEB INSPECTION AREA
CHORD  INBO  (AFT SIDE)
REAR VIEW
SUPPORT  FRAME  FRAME  TYPICAL  SUPPORT  RIGHT SIDE OPPOSITE)  (LEFT SIDE SHOWN  & WEB INSPECTION AREA  (FORWARD SIDE) AND  CHORD INSPECTION  (AFT SIDE)  1474320
CRACK
FIGURE 2: INSPECTION
(SHEET 2 OF 10)
Original Issue: December 17, 1998
Revision 7 July 19, 2013  Export Controlled ECCN: 9E991 - BOEING  747-53A2427
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  51 of 126

### Page 52 (OCR)

BOEING SERVICE BULLETIN 747-53A2427
ALERT  ALERT
STA
2598  FORWARD
INNER
• CHORD
UPPER
SPLICE
• FITTING
00305 LOCATIONS
SPLICE
• FITTING
FLOOR
SUPPORT
1025 26 5 LOCATIONS
AFT
INNER
CHORD
SUPPORT  FRAME
UP
A-A  →FWD
2215728
FIGURE 2: INSPECTION
(SHEET 3 OF 10)
Original Issue: December 17, 1998
Revision 7 July 19, 2013  Export Controlled ECCN: 9E991 - BOEING  747-53A2427
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  52 of 126

### Page 53 (OCR)

BOEING SERVICE BULLETIN 747-53A2427
ALERT  ALERT
1 12 25 26
AFT INNER
TYPICAL CRACK  CHORD
0058
FLOOR
SUPPORT
STA 2598
BULKHEAD
1 14 25 26
2D MINIMUM
(TYPICAL)
LOWER  BULKHEAD
UP  SPLICE  LOWER WEB
FITTING
WEB INSPECTION  2017960
_ AREA
FIGURE 2: INSPECTION
(SHEET 4 OF 10)
Original Issue: December 17, 1998
Revision 7 July 19, 2013  Export Controlled ECCN: 9E991 - BOEING  747-53A2427
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  53 of 126

### Page 54 (OCR)

BOEING SERVICE BULLETIN 747-53A2427
ALERT  ALERT
STA
2598
FRAME
SUPPORT
116 25 26 5 LOCATIONS
AFT
INNER
CORD  LOWER
SPLICE
FITTING
1125 26 5 LOCATIONS
— FORWARD
INNER
CORD
UP
→ FWD  B-B  2019245
FIGURE 2: INSPECTION
(SHEET 5 OF 10)
Original Issue: December 17, 1998
Revision 7 July 19, 2013  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright @ Unpublished  747-53A2427
Work - See page 1 for details.  54 of 126

### Page 55 (OCR)

BOEING SERVICE BULLETIN 747-53A2427
ALERT  ALERT
FORWARD  BULKHEAD
FORWARD
INNER CHORD  WEB  INNER  BULK HEAD
WEB
CHORD
INSPECTION
UPPER
AREA  SPLICE
TYPICAL  FITTING
CRACK  18
TYPICAL
• SHEAR  CRACK
AFT INNER  • UPPER  DECK  UP
CHORD  SPLICE
FITTING
UP  FWD<
SEE O  DECK  SHEAR
FRONT VIEW  C-C
INBD '  FWD  (LEFT SIDE SHOWN  SHEAR
FRAME
RIGHT SIDE OPPOSITE)  DECK  SUPPORT
UPPER SPLICE
INSPECTION  FITTING
AREA
STA
2598  FORWARD INNER
CHORD
SHEAR DECK
> D
UP
TYPICAL FRAME
> FWD  SUPPORT CRACK  FWD
UPPER  FRONT VIEW
SPLICE  (LEFT SIDE SHOWN
FITTING  RIGHT SIDE OPPOSITE)
D-D  FRAME SUPPORT
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
value gives the number of fastener locations on each side of the bulkhead.
FIGURE 2: INSPECTION
(SHEET 6 OF 10)
Original Issue: December 17, 1998
Revision 7 July 19, 2013  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2427
Work - See page 1 for details.  55 of 126

### Page 56

NOTE: The inspection given in this figure has been expanded with revisions 4, 6, and 7 to the service bulletin.
Some steps in the table below have a note given with the step number which states that the instruction
given in that step was added with a revision (revision 4, 6 or 7) to this service bulletin. These notes
were included to link the inspection work given in that step to compliance data that is referenced to the
date of a service bulletin revision. Thus, the similar work given in steps 2/3, 4/5, 10/11, 13/14, 18/19,
and 21/22 was divided into different steps for compliance specification purposes only.
CAUTION: FASTENERS CAN BE REMOVED FOR OPEN HOLE INSPECTIONS AT ALL SPECIFIED
LOCATIONS ON THE LEFT OR RIGHT SIDE OF THE BULKHEAD; HOWEVER, ALL THE
REMOVED FASTENERS ARE TO BE REPLACED BEFORE FASTENERS ARE REMOVED
FROM THE OPPOSITE SIDE OF THE BULKHEAD. FAILURE TO COMPLY WITH THIS LIMIT
COULD CAUSE DAMAGE TO THE BULKHEAD AND/OR ADJACENT STRUCTURE.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(f)43-FastenersRemove1
(a) (i)2-Aft Inner ChordInspect2 (c)
Web
Forward Inner Chord 2-3 (e)
Upper Splice Fitting
(a) (i)2-Aft Inner ChordInspect4 (c)
Frame Support
Upper Splice Fitting 2-5 (e)
(a) (i)5Fwd Inner ChordInspect6 (e)
Lower Splice Fitting
(a) (i)5Frame SupportInspect7 (e)
Lower Splice Fitting
(a) (i)2-Aft Inner ChordInspect8 (c)
Web
Floor Support
(a) (i)1-Aft Inner ChordInspect9 (c)
Web
(a) (i)1-Aft Inner ChordInspect10 (d)
Web
Forward Inner Chord 3-11 (e)
Lower Splice Fitting
(a) (i)4-Lower Splice FittingInspect12 (e)
Frame Support
Fwd Inner Chord
(a) (i)2-Aft Inner ChordInspect13 (d)
Web and Doubler
Floor Support 2-14 (e)
(a) (i)5Lower Splice FittingInspect15 (e)
Fwd Inner Chord
FIGURE 2: INSPECTION
(SHEET 7 OF 10)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7 July 19, 2013
56 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 57

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (i)5Lower Splice FittingInspect16 (e)
Frame Support
(b)--Forward Inner ChordInspect17
(b)--Upper Splice FittingInspect18
Area of fillet radius
(b)
19 (e)
(b)--Frame SupportInspect20
(b)--Aft Inner ChordInspect21
22 (c)
(b)--Upper Web (aft side)Inspect23 (d)
Upper Web (fwd side)
(b) This step is ap-
plicable on the left
side of the bulk-
head only.
--Lower WebInspect24 (d)
(g) See fastener
code table for hole
sizes.
43 (h)-Fastener HoleDrill/Ream25
-43FastenerInstall26
(a) Do an open hole high frequency eddy current (HFEC) inspection for cracks at the identified
fastener hole in accordance with 747 NDT, Part 6, 51-00-00 Figure 1, 11 or 16.
(b) Do a surface high frequency eddy current (HFEC) inspection for cracks in accordance with
747 NDT, Part 6, 51-00-00 Figure 4 or 23. The inspection area is shown shaded in the figure.
(c) The inspection given in this step was added with Revision 4 of this service bulletin.
(d) The inspection given in this step was added with Revision 6 of this service bulletin.
(e) The inspection given in this step was added with Revision 7 of this service bulletin.
(f) This step removes fasteners so that open hole inspections can be done. The quantity value
given with this step is the total number of open hole inspection locations on each side of the
bulkhead. Fasteners can be removed from all the specified locations on either the left or right
side of the bulkhead; however, all the removed fasteners are to be replaced before fasteners
are removed from the opposite side of the bulkhead.
(g) The work given in this step is to be done with the initial open hole inspection and done one
time only. This work will make it easier to remove the fasteners for repeat inspections. If this
work has been accomplished, this step is not applicable.
(h) Do not drill/ream and install fasteners at the three fastener holes common to the inboard leg
of the aft inner chord and the upper web in this step if the interim-modification is to be accom-
plished before the next flight. Fasteners will be installed with the interim modification parts
at these locations.
FIGURE 2: INSPECTION
(SHEET 8 OF 10)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7 July 19, 2013
57 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 58

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(i) If a crack is indicated, the hole diameter can be increased up to a maximum 1/32 inch oversize
to remove the crack. After the hole diameter is increased, repeat the open hole HFEC inspec-
tion (in accordance with 747 NDT, Part 6, 51-00-00 Figure 1, 11 or 16). If a crack indication
remains after a 1/32 oversize, more repair work is necessary. Do not install fasteners.
The codes shown below agree with the letter shown in the upper left corner of the fastener symbols in the figure.
A number in the lower right corner gives the grip length of the fastener.
If the grip length shown is not available, fasteners may be one grip length longer than indicated. Also, if any of
the fastener part numbers are not available or have been superseded, Boeing Document D590 and Boeing
drawing 012W6100 may be used to identify a satisfactory substitute.
MORE DATAHOLE DIAQTYIDENTIFICATIONNAMECODE
GROUP 1, 2 AIR-
PLANES ONLY
Close Ream
0.2495/0.2505
-BACB30MY8K( )
BACC30M8
BOLT
COLLAR
J
(a) (b) (d) (e) (f)
GROUP 3 AIRPLANES
ONLY
-BACB30NX8K( )
BACC30BH8
BOLT
COLLAR
(a) (j)
GROUP 1, 2 AIR-
PLANES ONLY
Close Ream
0.3120/0.3130
-BACB30MY10K( )
BACC30M10
BOLT
COLLAR
K
(a) (c) (g) (h) (i)
GROUP 3 AIRPLANES
ONLY
-BACB30NX10K( )
BACC30BH10
BOLT
COLLAR
(a) (k)
(a) (b) (d) (e) (f)Close Ream
0.2495/0.2505
-BACB30MY8K4
BACC30M8
BOLT
COLLAR
L
GROUP 1, 2 AIR-
PLANES ONLY
Close Ream
0.2495/0.2505
-BACB30MY8K8
BACB30MY8K10
BOLT (LS)
BOLT (RS)
M
(a) (b) (d) (e) (f)BACC30M8COLLAR
GROUP 3 AIRPLANES
ONLY
-BACB30NX8K8
BACB30NX8K10
BOLT (LS)
BOLT (RS)
(a) (j)BACC30BH8COLLAR
GROUP 1, 2 AIR-
PLANES ONLY
Close Ream
0.2495/0.2505
-BACB30MY8K7
BACB30MY8K9
BOLT (LS)
BOLT (RS)
N
(a) (b) (d) (e) (f)BACC30M8COLLAR
GROUP 3 AIRPLANES
ONLY
-BACB30NX8K7
BACB30NX8K9
BOLT (LS)
BOLT (RS)
(a) (j)BACC30BH8COLLAR
FIGURE 2: INSPECTION
(SHEET 9 OF 10)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7 July 19, 2013
58 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 59

MORE DATAHOLE DIAQTYIDENTIFICATIONNAMECODE
GROUP 1, 2 AIR-
PLANES ONLY
Close Ream
0.2495/0.2505
-BACB30MY8K7
BACB30MY8K10
BOLT (LS)
BOLT (RS)
O
(a) (b) (d) (e) (f)BACC30M8COLLAR
GROUP 3 AIRPLANES
ONLY
-BACB30NX8K7
BACB30NX8K10
BOLT (LS)
BOLT (RS)
(a) (j)BACC30BH8COLLAR
(a) Close ream holes are specified to facilitate subsequent open hole HFEC inspections without oversizing.
(b) If necessary, up to 1/32 oversize is allowed. For 1/64 oversize use BACB30MY8K( )X and BACC30M8 in
0.2661/0.2651 diameter hole. For 1/32 oversize use BACB30MY8K( )Y and BACC30R8 in 0.2817/0.2807
diameter hole.
(c) If necessary, up to 1/32 oversize is allowed. For 1/64 oversize use BACB30MY10K( )X and BACC30M10
in 0.3286/0.3276 diameter hole, and 1/32 oversize use BACB30MY10K( )Y and BACC30R10 in
0.3442/0.3432 diameter hole .
(d) Alternate fastener for standard size: BACB30NT4K( ) BOLT, BACW10BP4CD WASHER under head,
BACW10BP4DP WASHER under nut and BACN10JC4CD NUT. Torque nut 63 - 67 inch/pounds.
(e) Alternate fastener for 1/64 oversize: BACB30LK4K( )X BOLT, BACW10BP41CD WASHER under head,
BACW10BP41DP WASHER under nut and BACN10JC4CD NUT. Torque nut 63 - 67 inch/pounds.
(f) Alternate fastener for 1/32 oversize: BACB30LK4K( )Y BOLT, BACW10BP42CD WASHER under head,
BACW10BP42DP WASHER under nut and BACN10JC4CD NUT. Torque nut 63 - 67 inch/pounds.
(g) Alternate fastener for standard size: BACB30NT5K( ) BOLT, BACW10BP5CD WASHER under head,
BACW10BP5DP WASHER under nut and BACN10JC5CD NUT. Torque nut 120 - 130 inch/pounds (target
is 125).
(h) Alternate fastener for 1/64 oversize: BACB30LK5K( )X BOLT, BACW10BP51CD WASHER under head,
BACW10BP51DP WASHER under nut and BACN10JC5CD NUT. Torque nut 120 - 130 inch/pounds
(target is 125).
(i) Alternate fastener for 1/32 oversize: BACB30LK5K( )Y BOLT, BACW10BP52CD WASHER under head,
BACW10BP52DP WASHER under nut and BACN10JC5CD NUT. Torque nut 120 - 130 inch/pounds
(target is 125).
(j) If necessary, up to 1/32 oversize is allowed. For 1/64 oversize use BACB30NX8K( )X and BACC30BH8
in 0.2661/0.2651 diameter hole. For 1/32 oversize use BACB30NX8K( )Y and BACC30AC8 in 0.2817/0.2807
diameter hole.
(k) If necessary, up to 1/32 oversize is allowed. For 1/64 oversize use BACB30NX10K( )X and BACC30BH10
in 0.3286/0.3276 diameter hole. For 1/32 oversize use BACB30NX10K( )Y and BACC30AC10 in
0.3442/0.3432 diameter hole.
FIGURE 2: INSPECTION
(SHEET 10 OF 10)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 17, 1998
747-53A2427Revision 7 July 19, 2013
59 of 126
BOEING SERVICE BULLETIN 747-53A2427
ALERTALERT

### Page 60 (OCR)

BOEING SERVICE BULLETIN 747-53A2427
ALERT  ALERT
THIS FIGURE IS DELETED.
INFORMATION IS NOW CONTAINED IN
PARAGRAPH 1.E., COMPLIANCE.
1423730
FIGURE DELETED
Desi Suy 18,20h9 17, 1998  Export Controlled ECCN: 9E991 - BOEING  747-53A2427
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  60 of 126

The text continues at https://openairdocs.org/service-documents/boeing/747-53a2427/file/07a7627b2609.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
