# Boeing Alert Service Bulletin 747-53A2784: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0498; AD 2012-22-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 747-53A2784](https://openairdocs.org/service-documents/boeing/747-53a2784.md)
- Title as filed: U.S. DOT/FAA - Boeing Service Bulletin - 2012-NM-212-AD
- Pages: 237
- PDF: https://openairdocs.org/files/sha256/85/95/8595562ae66e8e703355dd98da5f4af72c33b96e13cc468a0948e987be8bd001
- Page: https://openairdocs.org/service-documents/boeing/747-53a2784/file/8595562ae66e

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
747
Service Bulletin
Number: 747-53A2784
Original Issue: August 27, 2009
Revision 1: September 14, 2011
ATA System: 5310
SUBJECT: FUSELAGE - Main Frame - STA 320 Crown Frame - Web Inspection and Replacement
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2009 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
1 of 237
5.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
2 of 237
BOEING SERVICE BULLETIN 747-53A2784
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ...................................................... 9
1. PLANNING INFORMATION ........................................ 1 3
A. Effectivity ............................................... 1 3
1. Airplanes ............................................ 1 3
2. Spares Affected ........................................ 1 4
B. Concurrent Requirements ...................................... 1 4
C. Reason ................................................ 1 5
D. Description .............................................. 1 5
E. Compliance .............................................. 1 6
F. Approval ............................................... 1 9
G. Manpower .............................................. 1 9
H. Weight and Balance Changes .................................... 2 0
I. Electrical Load Data ......................................... 2 0
J. References .............................................. 2 1
1. Existing Data .......................................... 2 1
2. Data supplied with this Service Bulletin ............................ 2 1
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 2 1
K. Publications Affected ........................................ 2 2
L. Interchangeability and Intermixability of Parts ........................... 2 2
2. MATERIAL INFORMATION ........................................ 2 3
A. Material - Price and Availability ................................... 2 3
B. Industry Support Information .................................... 2 3
C. Parts Necessary For Each Airplane ................................. 2 3
1. Kits/Parts ............................................ 2 3
2. Parts and Materials Supplied by the Operator ........................ 3 5
3. Parts Modified and Reidentified ................................ 3 5
4. Parts Removed and Not Replaced .............................. 3 6
D. Parts Necessary to Change Spares ................................. 3 6
E. Special Tooling - Price and Availability ............................... 3 6
F. Special Tooling Necessary to do this Service Bulletin ....................... 3 6
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 7
A. GENERAL INFORMATION ..................................... 3 7
B. WORK INSTRUCTIONS ....................................... 3 8
FIGURE 1: STA 300 TO STA 340 CROWN - ACCESS .......................... 4 2
FIGURE 2: STA 320 CROWN FRAME - WEB THICKNESS MEASUREMENT ............. 4 5
FIGURE 3: STA 320 CROWN FRAME - INSPECTION .......................... 4 7
FIGURE 4: DELETED ............................................ 5 1
FIGURE 5: STA 320 CROWN FRAME - WEB INSPECTION ....................... 5 2
FIGURE 6: STA 300 TO STA 340 CROWN - ACCESS PANEL REMOVAL ............... 5 7
FIGURE 7: STA 320 CROWN FRAME - STRAP, ANGLE, TEE, STIFFENER, CLIP AND BRACKET
REMOVAL ........................................... 6 3
FIGURE 8: STA 320 CROWN FRAME - LOWER CHORD REMOVAL .................. 8 1
FIGURE 9: STA 320 TO STA 340 CROWN - LEFT SIDE INTERCOSTAL REMOVAL ......... 9 4
FIGURE 10: STA 320 TO STA 340 CROWN - RIGHT SIDE INTERCOSTAL REMOVAL ........ 1 0 0
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
3 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 4

FIGURE 11: STA 320 CROWN FRAME - WEB REMOVAL ........................ 1 0 6
FIGURE 12: STA 320 CROWN FRAME - LOWER CHORD INSPECTION ............... 1 1 2
FIGURE 13: STA 320 CROWN FRAME - WEB INSTALLATION ..................... 1 1 7
FIGURE 14: STA 320 TO STA 340 CROWN - RIGHT SIDE INTERCOSTAL INSTALLATION ..... 1 2 5
FIGURE 15: STA 320 TO STA 340 CROWN - LEFT SIDE INTERCOSTAL INSTALLATION ...... 1 3 3
FIGURE 16: STA 320 CROWN FRAME - LOWER CHORD AND SPLICE INSTALLATION ...... 1 4 1
FIGURE 17: STA 320 CROWN FRAME - DRIP SHIELD BRACKET MODIFICATION OR FABRICATION
................................................. 1 5 5
FIGURE 18: STA 320 CROWN FRAME - STRAP, ANGLE, TEE STIFFENER, CLIP AND BRACKET
INSTALLATION ........................................ 1 5 8
FIGURE 19: STA 320 TO STA 340 CROWN - INTERCOSTAL, TEE AND STRAP INSTALLATION . . 185
FIGURE 20: STA 300 TO STA 340 CROWN - ACCESS PANEL INSTALLATION ........... 1 9 8
FIGURE 21: STA 300 TO STA 340 CROWN - CLOSE ACCESS ..................... 2 0 5
FIGURE 22: STA 300 TO STA 340 CROWN - ACCESS PANEL REMOVAL .............. 2 0 8
FIGURE 23: STA 320 CROWN FRAME - POST WEB REPLACEMENT INSPECTIONS ........ 2 1 4
FIGURE 24: STA 300 TO STA 340 CROWN - ACCESS PANEL INSTALLATION ........... 2 1 7
FIGURE 25: STA 320 CROWN FRAME - UPPER CHORD AND SKIN FASTENER REMOVAL .... 2 2 3
FIGURE 26: STA 320 CROWN FRAME - UPPER CHORD AND SKIN FASTENER INSTALLATION . 227
APPENDIX A: 015U1848-1 TOP KIT - PARTS LIST AND FIGURE KITS ................. 2 3 2
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
4 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 5

Commercial 
Airplanes
747
Service Bulletin
Revision Transmittal SheetNumber: 747-53A2784Original Issue: August 27, 2009
Revision 1: September 14, 2011
ATA System: 5310
SUBJECT: FUSELAGE - Main Frame - STA 320 Crown Frame - Web Inspection and Replacement
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
No more work is necessary on airplanes changed in accordance with the original issue of this service bulletin.
REASON FOR REVISION
As a part of a service bulletin validation program, this inspection and change was completed on airplane RT437
by Service Bulletin 747-53A2784 Original Issue before the release of Revision 1 of this service bulletin. The
inspection and change completed on airplane RT437 by Service Bulletin 747-53A2784 Original Issue is equivalent
to the release of Revision 1 of this service bulletin. Airplane RT437 has the configuration of a Group 1 airplane.
This revision is sent to incorporate all necessary additions and changes found as a result of the validation of
this service bulletin:
1. Summary, Background: The condition for web replacement is corrected. Information is added for airplane
RT437. New service history information is added
2. Summary, Action: Action is changed for airplanes with a repair doubler installed on the web. Buttock Line
(BL) 0 intercostal inspection is removed.
3. Paragraph 1.C., Reason: The condition for web replacement is corrected. Information is added for airplane
RT437. New service history information is added
4. Paragraph 1.D., Description: Description is changed for airplanes with a repair doubler installed on the web.
BL 0 intercostal inspection is removed.
5. Paragraph 1.E., Compliance: The conditions are changed in Table 1 for airplanes with a repair doubler
installed on the web. BL 0 intercostal inspections are removed from Table 2 and Table 3. A footnote is
added to Table 4.
6. Paragraph 1.G., Manpower: The manpower estimates are changed.
7. Paragraph 1.J., References, Existing Data: References are added.
8. Paragraph 1.K., Publications Affected: Affected publication is added.
9. Paragraph 2.A., Material - Price and Availability: Price and availability data for the new Top Kit and
Supplemental kit is added.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
5 of 237

### Page 6

10. Paragraph 2.C., Parts Necessary For Each Airplane: A new Top Kit and a new Supplemental Kit are added.
Protective enamel is added to Parts and Materials Supplied by the Operator.
11. Paragraph 3.A., General Information: Note 4 edge margin tolerance is removed. Note 13 edge margin
requirements are changed. Note 14 is revised to allow 1/32 oversize. An instruction is added to install parts
wet with BMS 5-95 sealant.
12. Paragraph 3.B., Work Instructions:
– The actions are changed in PART 2 for airplanes with a repair doubler installed on the web.
– BL 0 intercostal inspections are removed.
– Instructions are added to PART 5 for the removal and installation of fasteners common to the upper
chord and the skin as necessary for access.
– Instructions are added to PART 5 to chamfer/trim and inspect the sill chord in FIGURE 8 and to contact
Boeing if cracking is found.
– Instruction to apply chemical conversion coating, primer and protective enamel is added to PART 5.
13. FIGURE 4: This figure is deleted.
14. FIGURES 6 and 20: Instructions for removing and installing cover plates forward of STA 300 are deleted.
15. FIGURE 7: Instructions for trapped bolt are added. Instructions to remove / keep angles 141U8008-7 and
141U8008-8 are added.
16. FIGURE 8: Instructions to chamfer or trim the sill chord as necessary are added. Instructions to do an HFEC
inspection of the chamfer/trim surface are added.
17. FIGURES 9 and 10: Instructions for removing intercostals between STA 300 and STA 320 are removed.
Instructions for removing LBL 15.0 and RBL 15.0 intercostals between STA 320 and STA 340 are changed.
18. FIGURE 12: Instructions are added to inspect the left and right halves of the lower chord around fasteners
common to the straps.
19. FIGURE 13: Steps are added to align the lower chord and the edge margin requirements are changed for
the web. A caution is added for drilling the new web.
20. FIGURES 14 and 15: Instructions for installing intercostals between STA 300 and STA 320 are removed.
Fasteners for installing LBL 15.0 and RBL 15.0 intercostals between STA 320 and STA 340 are changed.
21. FIGURE 16: Instructions to align the web, lower chord and lower chord splice are added. An optional nut
and washer are added at 14 fastener locations common to the splice.
22. FIGURE 18: Instructions for the installation of angles 141U8008-7 and 141U8008-8 are added. An optional
fastener is added at two locations. Caution statements are added for some fastener locations common to
the 141U8008U19 and 141U8008U20 tees. The minimum edge margin is changed for some fastener
locations common to the 141U8008U19 and 141U8008U20 tees. Instructions to cut the 141U8008U19 and
141U8008U20 tees are changed. Instructions to chamfer 141U0058-13 clip and 141U8008-2 angle are
added. Fastener hole diameters are changed for fasteners common BL 0 intercostals.
23. FIGURE 19: Instructions are added to drill and cut the tees and to cut the intercostals. The part numbers
for shims 5, 6, 11 and 12 are corrected.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
6 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 7

24. FIGURE 20: The minimum edge margin is changed for two fastener locations common to the lower chord.
25. FIGURES 25 and 26: These figures are added to remove and install fasteners common to the upper chord
and skin as necessary for access.
26. Appendix A: This appendix is added to give part and figure kit information for the 015U1848-1 top kit.
The data given in Information Notice 747-53A2784 IN 01 is included in this revision.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
August 27, 2009Original Issue:
September 14, 2011Revision 1:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
7 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 8

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
8 of 237
BOEING SERVICE BULLETIN 747-53A2784
BLANK PAGE

### Page 9

Commercial 
Airplanes
747
Service Bulletin
SummaryNumber: 747-53A2784Original Issue: August 27, 2009
Revision 1: September 14, 2011
ATA System: 5310
SUBJECT: FUSELAGE - Main Frame - STA 320 Crown Frame - Web Inspection and Replacement
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Boeing has determined that the web of the Body Station (STA) 320 crown frame on some 747-400 airplanes
may not be the correct design thickness and the frame assembly could be missing fasteners. If the web is not
the correct thickness or if the frame assembly is missing fasteners, cracks could exist. If crown frame cracks
exist and are not found, the cracks could grow and lead to complete fracture of the STA 320 crown frame
assembly. Complete fracture of the crown frame assembly may result in damage to the skin and in-flight
decompression of the airplane.
During production an error was made on early 747-400's affecting the thickness of the STA 320 crown frame
web, which is located between Left Buttock Line (LBL) 25 and Right Buttock Line (RBL) 25, Water Line (WL)
380. Records indicate that the drawing was revised in September 1988 to increase the STA 320 crown frame
web thickness to 0.14 inch for 747-400 airplanes, however this change was not implemented in production until
September 1992. The result of this error was the continued installation of a 0.08 inch thick web instead of a 0.14
inch thick web. If the 0.08 inch thick web is not replaced it could crack due to fatigue. Boeing has also had a
report of missing fasteners common to the web.
Initially, two operators informed Boeing of a crown frame web crack at LBL 15.0, STA 320. The cracks were
both 0.65 inches in length and were reported after 9,354 flight cycles on one airplane and 12,851 flight cycles
on the other airplane. Further investigation revealed that in both cases the web was made from 0.08 inch thick
material and did not conform to production drawings. Also, an operator has reported missing fasteners from
locations common to the frame web and lower chord on the first delivered 747-400 after 10,317 flight cycles.
This airplane also had a web made from 0.08 inch thick material and did not conform to production drawings.
Since the original issue of this service bulletin, Boeing has received three more reports of STA 320 crown frame
web cracking on 747-400 airplanes with a 0.08 inch thick web. The reports were of a crack (length not specified)
reported at 9,456 flight cycles, a 0.65 inch crack reported at 29,866 flight cycles and a 0.85 inch crack reported
at 29,956 flight cycles.
Accomplishment of the work given in this service bulletin will determine if the web of the STA 320 crown frame
is the correct design thickness and if fasteners are missing from the web. If the web is not the correct thickness,
or is missing fasteners, this service bulletin provides inspections to find possible cracks in the STA 320 crown
frame. This service bulletin also provides instructions for replacement of the STA 320 crown frame web if it is
not the correct design thickness.
Boeing Service Related Problem (SRP) 747-SRP-53-319 is related to this service bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
9 of 237

### Page 10

As a part of a service bulletin validation program, this inspection and change was completed on airplane RT437
by Service Bulletin 747-53A2784 Original Issue before the release of Revision 1 of this service bulletin. The
inspection and change completed on airplane RT437 by Service Bulletin 747-53A2784 Original Issue is equivalent
to the release of Revision 1 of this service bulletin. Airplane RT437 has the configuration of a Group 1 airplane.
ACTION (PRR 85901-93RS)
Measure the thickness of the STA 320 crown frame web. For airplanes with a 0.136-0.145 inch thick web, no
action is required. For airplanes with a 0.078-0.083 inch thick web, do a detailed inspection for cracks and a
general visual inspection for missing fasteners of the STA 320 crown frame from LBL 30.0 to RBL 30.0. If any
crack is found in the upper or lower chord, contact Boeing for repair instructions. Replace the web. For airplanes
with a 0.078-0.083 inch thick web and no repair doubler installed, if no cracks are found in the frame it is optional
to do a High Frequency Eddy Current (HFEC) inspection of the web to delay web replacement if no crack is
found by the HFEC inspection. If web replacement is delayed, replace all missing fasteners.
After the web is replaced, do repeat detailed inspections of the web, upper chord, lower chord and lower chord
splice for cracks. If any crack is found, contact Boeing for repair instructions.
EFFECTIVITY
747-400/-400D/-400F airplanes. Refer to Paragraph 1.A.1., Airplanes for the list of affected airplanes.
COMPLIANCE
Refer to Paragraph 1.E., Compliance.
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection and/or repair procedures given in this service
bulletin.
MANPOWER
Elapsed HoursTotal Task HoursAirplanes
126.15216.15All airplanes
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
10 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 11 (OCR)

BOEING SERVICE BULLETIN 747-53A2784
MEASURE THE THICKNESS
OF THE WEB. IF THE WEB
IS 0.136-0.145 INCH THICK
NO ACTION IS REQUIRED.
RBL
7.5
BL O
IF ANY CRACK IS FOUND
IN THE WEB, REPLACE
THE WEB. IF A REPAIR
DOUBLER IS INSTALLED
ON THE WEB, REPLACE
THE WEB.
STA
320
IF THE WEB IS 0.078-0.083 INCH THICK,
DO A DETAILED INSPECTION OF THE
STA 320 FRAME BETWEEN LBL 30.0
AND RBL 30.0 FOR CRACKS AND
MISSING FASTENERS IN THE LOWER
CHORD.
SOME STRUCTURE NOT SHOWN FOR CLARITY  1703583
Original Issue: August 27, 2009
Revision 1: September 14, 2011  Copyright © Unpublished Work - See page 1 for details.  BOEING PROPRIETARY -  747-53A2784  11 of 237

### Page 12

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
12 of 237
BOEING SERVICE BULLETIN 747-53A2784
BLANK PAGE

### Page 13

Commercial 
Airplanes
747
Service Bulletin
Number: 747-53A2784
Original Issue: August 27, 2009
Revision 1: September 14, 2011
ATA System: 5310
SUBJECT: FUSELAGE - Main Frame - STA 320 Crown Frame - Web Inspection and Replacement
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is for the airplanes shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR85901-93RS for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
747-400, -400D, and -400F airplanes, line numbers 696 through 991.-1
Airplane Models:
747-400, 747-400D, 747-400F
GroupVariable Number
1RR701
1RT001 - RT009
1RT021 - RT022
1RT031 - RT033
1RT041 - RT047
1RT061
1RT071 - RT075
1RT101 - RT103
1RT121
1RT131 - RT133
1RT401 - RT412
1RT431 - RT441
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
13 of 237

### Page 14

GroupVariable Number
1RT451 - RT465
1RT471 - RT496
1RT501 - RT520
1RT531 - RT535
1RT551 - RT568
1RT571 - RT581
1RT591
1RT601 - RT622
1RT631 - RT635
1RT641 - RT657
1RT671 - RT673
1RT681 - RT682
1RT691 - RT696
1RT701 - RT704
1RT711 - RT717
1RT741 - RT745
1RT751 - RT755
1RT776 - RT777
1RT781 - RT783
1RT861 - RT864
1RT876 - RT878
1RT931 - RT932
1RT951 - RT954
1RU001
1RU031
1RU801 - RU808
1RU831 - RU838
2. Spares Affected
None.
B. Concurrent Requirements
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
14 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 15

C. Reason
Boeing has determined that the web of the Body Station (STA) 320 crown frame on some 747-400
airplanes may not be the correct design thickness and the frame assembly could be missing fasteners.
If the web is not the correct thickness or if the frame assembly is missing fasteners, cracks could exist.
If crown frame cracks exist and are not found, the cracks could grow and lead to complete fracture of
the STA 320 crown frame assembly. Complete fracture of the crown frame assembly may result in
damage to the skin and in-flight decompression of the airplane.
During production an error was made on early 747-400's affecting the thickness of the STA 320 crown
frame web, which is located between Left Buttock Line (LBL) 25 and Right Buttock Line (RBL) 25,
Water Line (WL) 380. Records indicate that the drawing was revised in September 1988 to increase
the STA 320 crown frame web thickness to 0.14 inch for 747-400 airplanes, however this change was
not implemented in production until September 1992. The result of this error was the continued
installation of a 0.08 inch thick web instead of a 0.14 inch thick web. If the 0.08 inch thick web is not
replaced it could crack due to fatigue. Boeing has also had a report of missing fasteners common to
the web.
Initially, two operators informed Boeing of a crown frame web crack at LBL 15.0, STA 320. The cracks
were both 0.65 inches in length and were reported after 9,354 flight cycles on one airplane and 12,851
flight cycles on the other airplane. Further investigation revealed that in both cases the web was made
from 0.08 inch thick material and did not conform to production drawings. Also, an operator has reported
missing fasteners from locations common to the frame web and lower chord on the first delivered
747-400 after 10,317 flight cycles. This airplane also had a web made from 0.08 inch thick material
and did not conform to production drawings.
Since the original issue of this service bulletin, Boeing has received three more reports of STA 320
crown frame web cracking on 747-400 airplanes with a 0.08 inch thick web. The reports were of a crack
(length not specified) reported at 9,456 flight cycles, a 0.65 inch crack reported at 29,866 flight cycles
and a 0.85 inch crack reported at 29,956 flight cycles.
Accomplishment of the work given in this service bulletin will determine if the web of the STA 320 crown
frame is the correct design thickness and if fasteners are missing from the web. If the web is not the
correct thickness, or is missing fasteners, this service bulletin provides inspections to find possible
cracks in the STA 320 crown frame. This service bulletin also provides instructions for replacement of
STA 320 crown frame web if it is not the correct design thickness.
Boeing Service Related Problem (SRP) 747-SRP-53-319 is related to this service bulletin.
As a part of a service bulletin validation program, this inspection and change was completed on airplane
RT437 by Service Bulletin 747-53A2784 Original Issue before the release of Revision 1 of this service
bulletin. The inspection and change completed on airplane RT437 by Service Bulletin 747-53A2784
Original Issue is equivalent to the release of Revision 1 of this service bulletin. Airplane RT437 has the
configuration of a Group 1 airplane.
D. Description
Measure the thickness of the STA 320 of the crown frame web.
Airplanes with a 0.136-0.145 inch thick web: No action is required.
Airplanes with a 0.078-0.083 inch thick web and no repair doubler installed on the web:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
15 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 16

– Do a detailed inspection for cracks and a general visual inspection for missing fasteners of the
STA 320 crown frame from LBL 30.0 to RBL 30.0.
– If any crack is found in the web, do the web replacement.
– If any crack is found in the upper chord or lower chord, contact Boeing for repair instructions
and do the repair.
– If no crack is found in the web, do the web replacement in accordance with this service bulletin.
Or, do a High Frequency Eddy Current (HFEC) inspection of the web, and if no cracks are
found, the web can be replaced at a later time, as given paragraph 1.E., Compliance.
– Install any missing fasteners.
– After a web is replaced:
– At the times given in paragraph 1.E., Compliance, do repetitive detailed inspections of the
web, upper chord, lower chord, and lower chord splice for cracks.
– If any crack is found, contact Boeing for repair instructions and do the repair.
Airplanes with a 0.078-0.083 inch thick web and a repair doubler installed on the web:
– Do a detailed inspection for cracks in the upper chord and lower chord and a general visual
inspection for missing fasteners of the STA 320 crown frame from LBL 30.0 to RBL 30.0.
– If any crack is found in the upper chord or lower chord, contact Boeing for repair instructions
and do the repair.
– Install any missing fasteners.
– Replace the web.
– After a web is replaced:
– At the times given in paragraph 1.E., Compliance, do repetitive detailed inspections of the
web, upper chord, lower chord, and lower chord splice for cracks.
– If any crack is found, contact Boeing for repair instructions and do the repair.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
221, 222747-400, 747-400D, 747-400F
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in
Paragraph 1.E., Compliance , Tables 1 to 4 of this service bulletin mandatory.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
16 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 17

Table 1: STA 320 Crown Frame Web Thickness Measurement
Compliance Time
(Whichever Occurs Later)
ActionCondition
Within 1,500
flight cycles after
the original issue
date of this ser-
vice bulletin
Before
4,000 total
flight cycles
Measure the thickness of the web in
accordance with paragraph 3.B.
WORK INSTRUCTIONS, PART 2, step
1.
All airplanes.
-No further action is requiredAll airplanes with a 0.136-0.145 inch
thick web.
In accordance with Table 2Do the work in accordance with Table
2
All airplanes with a 0.078-0.083 inch
thick web and no repair doubler in-
stalled on the web.
In accordance with Table 3Do the work in accordance with Table
3
All airplanes with a 0.078-0.083 inch
thick web and a repair doubler installed
on the web.
Table 2: STA 320 Crown Frame Inspection and Web Replacement
Compliance Time
(Whichever Occurs Later)
ActionCondition
Within 1,500
flight cycles after
the original issue
date of this ser-
vice bulletin
Before
4,000 total
flight cycles
Do a detailed inspection for cracks and
a general visual inspection for missing
fasteners in the STA 320 crown frame
in accordance with paragraph 3.B.
WORK INSTRUCTIONS, PART 3, step
1.
All airplanes with a 0.078-0.083 inch
thick web and no repair doubler in-
stalled on the web.
Before further flightContact Boeing for repair instructions
and do the repair.
Any crack is found in the upper or
lower chord.
Before further flightReplace the web in accordance with
paragraph 3.B. WORK INSTRUC-
TIONS, PART 5 (a)
Any crack is found in the web.
Before further flightOPTION 1: Replace the web in accor-
dance with paragraph 3.B. WORK IN-
STRUCTIONS, PART 5 (a)
No crack is found in the web.
OR
OPTION 2: Do a HFEC inspection for
cracks around the holes in the web in
accordance with paragraph 3.B.
WORK INSTRUCTIONS, PART 3, step
1.c.(2)
Before further flightReplace the web in accordance with
paragraph 3.B. WORK INSTRUC-
TIONS, PART 5 (a)
Option 2 HFEC inspection is accom-
plished and any crack is found in the
web.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
17 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 18

Table 2: STA 320 Crown Frame Inspection and Web Replacement
Compliance Time
(Whichever Occurs Later)
ActionCondition
Before further flightReplace missing fasteners in accor-
dance with paragraph 3.B. WORK IN-
STRUCTIONS, PART 3, step
1.c.(2)(b)1)
Option 2 HFEC inspection is accom-
plished and no crack is found in the
web.
Within 3,000 flight cycles after
accomplishment of the HFEC
inspection.
Replace the web in accordance with
paragraph 3.B. WORK INSTRUC-
TIONS, PART 5 (a)
(a) After web replacement, do the post web replacement inspections in accordance with Table 4.
Table 3: STA 320 Crown Frame Inspection and Web Replacement (Web with Repair Doubler)
Compliance Time
(Whichever Occurs Later)
ActionCondition
Within 1,500
flight cycles after
the original issue
date of this ser-
vice bulletin
Before
4,000 total
flight cycles
Do a detailed inspection for cracks in
the STA 320 crown frame in accor-
dance with paragraph 3.B. WORK IN-
STRUCTIONS, PART 4, step 1.
AND
All airplanes with a 0.078-0.083 inch
thick web and a repair doubler installed
on the web.
Replace the web in accordance with
paragraph 3.B. WORK INSTRUC-
TIONS, PART 5 (a)
Before further flightContact Boeing for repair instructions
and do the repair.
Any crack is found in the upper or
lower chord.
(a) After web replacement, do the post web replacement inspections in accordance with Table 4.
Table 4: STA 320 Post Web Replacement Inspections
Repeat Interval
(Not to Exceed)
Compliance
Time
ActionCondition
(a)Within 15,000
flight cycles
after web re-
placement
Do a detailed inspection of the
web, upper chord, lower chord
and lower chord splice for
cracks in accordance with
paragraph 3.B. WORK IN-
STRUCTIONS, PART 7, step
4.
All airplanes that have done
the STA 320 crown frame web
replacement in accordance
with paragraph 3.B. WORK
INSTRUCTIONS, PART 5
3000 flight cy-
cles (a)
-Repeat the detailed inspection
of the web, upper chord, lower
chord, and lower chord splice
for cracks in accordance with
paragraph 3.B. WORK IN-
STRUCTIONS, PART 7, step
4.
No crack found.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
18 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 19

Table 4: STA 320 Post Web Replacement Inspections
Repeat Interval
(Not to Exceed)
Compliance
Time
ActionCondition
-Before further
flight
Contact Boeing for repair in-
structions and do the repair.
Any crack found.
(a) When inspections in accordance with FAA AD 2009-19-05 start, the STA 320 Post Web
Replacement Inspections are not required. FAA AD 2009-19-05 is related to Boeing Service
Bulletin 747-53A2753.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this service bulletin for each
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with
operator task hour data if necessary. The estimate does not include lost time. These are some examples
of lost time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Elapsed HoursTask HoursNumber of Per-
sons
Task
25.5051.002FIGURE 1
0.100.101FIGURE 2
3.003.001FIGURE 3
3.003.001FIGURE 5
2.502.501FIGURE 6
4.258.502FIGURE 7
2.755.502FIGURE 8
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
19 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 20

Elapsed HoursTask HoursNumber of Per-
sons
Task
3.753.751FIGURE 9
3.753.751FIGURE 10
1.501.501FIGURE 11
2.755.502FIGURE 12
2.002.001FIGURE 13
3.753.751FIGURE 14
3.753.751FIGURE 15
3.256.502FIGURE 16
1.001.001FIGURE 17
6.5013.002FIGURE 18
4.509.002FIGURE 19
2.502.501FIGURE 20
37.5075.002FIGURE 21
1.503.002FIGURE 22
2.502.501FIGURE 23
1.503.002FIGURE 24
2.002.001FIGURE 25
1.051.051FIGURE 26
126.15216.15TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+1792.0+5.6All airplanes - Web
Replacement
I. Electrical Load Data
Not changed.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
20 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 21

J. References
1. Existing Data
a. Engineering Change Memo PRR 85901-93RS
b. Boeing Service Bulletin 747-53A2753. FAA AD 2009-19-05 is related to Boeing Service Bulletin
747-53A2753.
c. Service Related Problem (SRP) 747-SRP-53-319
d. 747-400 Maintenance Manual (AMM) Subject 25-11-01, 25-14-00, 25-14-01, 25-15-00,
25-21-00, 25-22-00, 31-00-00
e. 747-400 Structural Repair Manual (SRM) 51-40-05, 51-40-06 Chapter 51, Chapter 53
f. 747-400F Structural Repair Manual (SRM) 51-40-05, 51-40-06 Chapter 51, Chapter 53
g. 747-400SF Structural Repair Manual (SRM) 51-40-05, 51-40-06 Chapter 51, Chapter 53
h. 747 Nondestructive Test (NDT) Manual, Part 6, Subject 51-00-00
i. Boeing Standard Wiring Practices Manual (SWPM) 20-10-11, 20-10-12, 20-10-19
j. Boeing Standard Overhaul Practices Manual (SOPM) 20-41-02, 20-43-03, 20-50-10, 20-50-19
k. Boeing Parts Standards Document D-590
l. Boeing Drawing 012W6100
2. Data supplied with this Service Bulletin
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin
TitleDrawing Number
SKIN & DOUBLER INSTL - UPPER CROWN CAB141U8009
DUCT INSTL - AIR CONDITIONING, FLIGHT DECK214U1002
DRIPSHIELD INSTL - OVERHEAD PILOTS (POH)232U1301
FRAME INSTALLATION - UPPER CROWN, CAB STATION 32065B07603
NO. 2 POST INSTL - WINDSHIELD LINE C-D65B07612
INTERCOSTAL INSTL - BL"0", UPPER CROWN, STA 290-36065B07614
SILL INSTL - UPPER, UPPER CROWN, CAB, SECTION 4165B07616
INTERCOSTAL INSTL - UPPER CROWN, CAB, BL 7.50 & BL
15.00
65B07617
FRAME INSTL - STA 340, BODY CAB65B10334
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
21 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 22

These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
53-10747 Structural Repair Manual
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS and new DTI requirements for the structure
affected are contained in Paragraph 1.E., Compliance of this service bulletin.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
22 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 23

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary for Each Airplane. Operators
are encouraged to share schedule requirements with Boeing for incorporation of the service bulletin.
The kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment.
Prices are in United States Dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of these methods:
1. Order on-line via ATA Spec 2000 or The Boeing PART Page
2. Fax to (206) 662-7145
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the Revision 01
date of this Ser-
vice Bulletin
(US Dollars)
ROLT as of the
Revision 01 date
of this Service
Bulletin
(Calendar Days)
QTYDateNameKit Number
(a)(a)(a)(a)TOP KIT - FRAME
WEB REPLACEMENT,
STA 320 CROWN
015U1848-1
21,887.005101011/11/11TOP KIT - FRAME
WEB REPLACEMENT,
STA 320 CROWN
015U1848-2
105.00390--SUPPLEMENTAL KIT
- FRAME WEB RE-
PLACEMENT, STA 320
CROWN
015U1848-3
(a) A limited quantity of 015U1848-1 top kits will be available until the 015U1848-2 top kit becomes available.
Contact Boeing for availability and price information.
B. Industry Support Information
Boeing warranty remedies are not available for the inspection and/or repair procedures given in this
service bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
NOTE: One 015U1848-2 top kit and the items shown in Paragraph 2.C.2., Parts and Materials
Supplied by the Operator, are necessary for each airplane. The Top Kit is divided into
Figure kits for each installation figure shown in the table below.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
23 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 24

If a 015U1848-1 top kit has previously been purchased but not installed, one 015U1848-3
supplemental kit can be added to the 015U1848-1 top kit to give all the parts necessary
for a 015U1848-2 top kit.
If a 015U1848-2 top kit is not available, one 015U1848-1 top kit and one 015U1848-3
supplemental kit can be added together to give all the parts necessary for a 015U1848-2
top kit. Refer to APPENDIX A for 015U1848-1 top kit parts list and figure kits.
Figure Kit
191816151413Top Kit
111111015U1848-2
Figure Kit
2620Top Kit
11015U1848-2
ALL
KIT 015U1848-2
NOTES
Existing Part
NumberName
Figure
New Part Number
191816151413
QTY
141U8008-11TEE1141U0058-11
141U8008-12TEE1141U0058-12
141U8008-1CLIP1141U0058-13
SPLICE PLATE1141U0058-15
SPLICE STRAP1141U0058-17
SPLICE STRAP1141U0058-19
SPLICE STRAP1141U0058-20
141U8008-2ANGLE1141U8008-2
(c)141U8008-3TEE1141U8008-3
(c)141U8008-4TEE1141U8008-4
(c)141U8008-503TEE1141U8008U19
(c)141U8008-504TEE1141U8008U20
(c)141U8008-5ANGLE1141U8008U5
(c)141U8008-6ANGLE1141U8008U6
(c)141U8011-1,
141U8012-1
INTERCOSTAL1141U8012U1
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
24 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 25

ALL
KIT 015U1848-2
NOTES
Existing Part
NumberName
Figure
New Part Number
191816151413
QTY
(c)141U8011-2,
141U8012-2
INTERCOSTAL1141U8012U2
65B07603-24FILLER265B07603-24
65B07603-25FILLER265B07603-25
65B07603-501FILLER-RADIUS265B07603-501
65B07603-34WEB165B07603-58
65B07612-13FILLER1165B07612-13
65B07617-19SHIM265B07617-19
(b)BOLT, PROTRUD-
ING HD
4BACB30MY10K4X
(b)BOLT, PROTRUD-
ING HD
4BACB30MY10K6X
(b)BOLT, PROTRUD-
ING HD
6BACB30MY8K10X
(a) (b)BOLT, PROTRUD-
ING HD
945BACB30MY8K4X
(a) (b)BOLT, PROTRUD-
ING HD
927BACB30MY8K5X
(a) (b)BOLT, PROTRUD-
ING HD
1634BACB30MY8K6X
(a) (b)BOLT, PROTRUD-
ING HD
742BACB30MY8K7X
(b)BOLT, PROTRUD-
ING HD
9BACB30MY8K8X
(a) (b)BOLT, PROTRUD-
ING HD
18BACB30MY8K9X
(b)BOLT, HEX HEAD2BACB30NM3K10X
(b)BOLT, HEX HEADBACB30NM3K11X
(a) (b)BOLT, HEX HEAD13BACB30NM3K12X
(b)BOLT11BACB30NM3K4
(b)BOLT2BACB30NM3K7
(b)BOLT, HEX HEAD2BACB30NR4K10X
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
25 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 26

ALL
KIT 015U1848-2
NOTES
Existing Part
NumberName
Figure
New Part Number
191816151413
QTY
(b)BOLT22BACB30NR4K11X
(BACB30US4K12X
optional)
(b)BOLT, HEX HEAD2BACB30NR4K12X
(b)BOLT, HEX HEAD6BACB30NR4K6
(b)BOLT, HEX HEAD2BACB30NR4K6X
(b)BOLT, HEX HEAD2BACB30NR4K8X
(b)BOLTBACB30NW6K4
(a) (b)BOLT, 100 DEG
HEX DR
3737BACB30NW6K4X
(b)BOLT, HILOKBACB30NW6K5
(a) (b)BOLT, 100 DEG
HEX DR
8422BACB30NW6K5X
(b)BOLT, 100 DEG
HEX DR
77BACB30NW6K5Y
(b)HI-LOKBACB30NW6K6
(b)BOLT, 100 DEG
HEX DR
822BACB30NW6K6X
(b)BOLTBACB30NW6K7
(b)BOLT, 100 DEG
HEX DR
8BACB30NW6K7X
(b)HI-LOKBACB30NW6K8
(a) (b)BOLT, PROTRUD-
ING HD
20834BACB30NX6K4X
(a) (b)BOLT, PROTRUD-
ING HD
1356BACB30NX6K5X
(a) (b)BOLT, PROTRUD-
ING HD
21011BACB30NX6K6X
(a) (b)BOLT, PROTRUD-
ING HD
11BACB30NX6K6Y
(b)BOLT, PROTRUD-
ING HD
8111BACB30NX6K7X
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
26 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 27

ALL
KIT 015U1848-2
NOTES
Existing Part
NumberName
Figure
New Part Number
191816151413
QTY
(a) (b)BOLT, PROTRUD-
ING HD
97BACB30NX6K8X
(a) (b)BOLT, PROTRUD-
ING HD
452BACB30NX6K9X
(b)BOLT, PROTRUD-
ING HD
2BACB30NX8K11X
(b)BOLT, PROTRUD-
ING HD
2BACB30NX8K8X
(b)BOLT, 100 DEG
HEAD
22BACB30VF3K5
(a) (b)BOLT26961919BACB30VT6K4
(b)BOLT622BACB30VT6K5
(b)BOLT6BACB30VT6K6
(a) (b)BOLT13BACB30VT6K8
(a) (b)BOLT613BACB30VT8K4
(a) (b)HI-LOK2011BACB30VT8K6
(b)BOLT, 100 DEG
HEX DR
BACB30YP6K3
(b)BOLT, 100 DEG
HEX DR
BACB30YP6K4
(a)COLLAR11BACC30AC6
(a)COLLAR235821BACC30BH6
COLLAR22BACC30BH8
(a)COLLAR2610312121BACC30BL6
(a)COLLAR63311BACC30BL8
COLLAR8BACC30M10
(a)COLLAR1025151BACC30M6
(a)COLLAR21603346BACC30M8
(a)COLLAR77BACC30R6
FILLER2BACF3F013R046NN
TAPERED FILLER11BACF3T01F35-20
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
27 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 28

ALL
KIT 015U1848-2
NOTES
Existing Part
NumberName
Figure
New Part Number
191816151413
QTY
NUT22BACN10HR4CD
(a)NUT15BACN10JC3C
(a)NUT13BACN10JC4C
NUT6BACN10JC4CM
(a)NUT21533BACN10YR3CD
SHIM, LAMINAT-
ED
4BACS40R008C008F
SHIM, LAMINAT-
ED
411BACS40R008C020F
SHIM,LAMINATED2BACS40R008D031F
SHIM, LAMINAT-
ED
2BACS40R010B010F
SHIM LAMINATED2BACS40R020C030F
SHIM ,LAMINAT-
ED
11BACS40R020C035F
WASHER211BACW10BN3AC
(a)WASHER, PLAIN
AND COUNTER-
SUNK
1522BACW10BP31NPK
(a)WASHER21511BACW10BP3PK
WASHER, PLAIN22BACW10BP41CK
(a)WASHER, PLAIN128BACW10BP41NPK
WASHER, PLAIN
AND COUNTER-
SUNK
22BACW10BP41PK
WASHER, PLAIN6BACW10BP4NPK
(a)WASHER1734BACW10CA104CCU
(a)WASHER1734BACW10CA31CVU
WASHER, SELF-
ALIGN
22BACW10CA41CVU
WASHER22BACW10CA5CCU
(a) There are more parts than are necessary.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
28 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 29

ALL
KIT 015U1848-2
NOTES
Existing Part
NumberName
Figure
New Part Number
191816151413
QTY
(b) If grip length shown is not available at Boeing, fasteners supplied in kits may be one grip length longer
than indicated. Also, if any fastener part numbers listed are not available or have been superseded, sub-
stitute fasteners may be supplied in kits. Boeing Document D-590 and Boeing Drawing 012W6100 are
used to determine the part numbers used as substitutes.
(c) To make installation easier, some Boeing parts are sent in an ‘interim’ configuration. Boeing will identify
these interim configurations with a 'U', 'W' or 'Y' in place of the '-' (dash) in the part number. Interim parts
are changed to the ‘dash’ configuration when installed as given in the Accomplishment Instructions of this
service bulletin. Refer to Boeing Drawing 005W0900 "INTERIM PARTS – SPARES" and Service Letter
747-SL-00-018 for more information.
ALL
KIT 015U1848-2
NOTES
Existing Part
NumberName
Figure
New Part Number
2620
QTY
141U8008-11TEE141U0058-11
141U8008-12TEE141U0058-12
141U8008-1CLIP141U0058-13
SPLICE PLATE141U0058-15
SPLICE STRAP141U0058-17
SPLICE STRAP141U0058-19
SPLICE STRAP141U0058-20
141U8008-2ANGLE141U8008-2
141U8008-3TEE141U8008-3
141U8008-4TEE141U8008-4
141U8008-503TEE141U8008U19
141U8008-504TEE141U8008U20
141U8008-5ANGLE141U8008U5
141U8008-6ANGLE141U8008U6
141U8011-1,
141U8012-1
INTERCOSTAL141U8012U1
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
29 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 30

ALL
KIT 015U1848-2
NOTES
Existing Part
NumberName
Figure
New Part Number
2620
QTY
141U8011-2,
141U8012-2
INTERCOSTAL141U8012U2
65B07603-24FILLER65B07603-24
65B07603-25FILLER65B07603-25
65B07603-501FILLER-RADIUS65B07603-501
65B07603-34WEB65B07603-58
65B07612-13FILLER65B07612-13
65B07617-19SHIM65B07617-19
BOLT, PROTRUD-
ING HD
BACB30MY10K4X
BOLT, PROTRUD-
ING HD
BACB30MY10K6X
BOLT, PROTRUD-
ING HD
BACB30MY8K10X
BOLT, PROTRUD-
ING HD
BACB30MY8K4X
BOLT, PROTRUD-
ING HD
BACB30MY8K5X
BOLT, PROTRUD-
ING HD
BACB30MY8K6X
BOLT, PROTRUD-
ING HD
BACB30MY8K7X
BOLT, PROTRUD-
ING HD
BACB30MY8K8X
BOLT, PROTRUD-
ING HD
BACB30MY8K9X
BOLT, HEX HEADBACB30NM3K10X
(a) (b)BOLT, HEX HEAD11BACB30NM3K11X
BOLT, HEX HEADBACB30NM3K12X
BOLTBACB30NM3K4
BOLTBACB30NM3K7
BOLT, HEX HEADBACB30NR4K10X
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
30 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 31

ALL
KIT 015U1848-2
NOTES
Existing Part
NumberName
Figure
New Part Number
2620
QTY
BOLTBACB30NR4K11X
(BACB30US4K12X
optional)
BOLT, HEX HEADBACB30NR4K12X
BOLT, HEX HEADBACB30NR4K6
BOLT, HEX HEADBACB30NR4K6X
BOLT, HEX HEADBACB30NR4K8X
(b)BOLT15BACB30NW6K4
BOLT, 100 DEG
HEX DR
BACB30NW6K4X
(b)BOLT, HILOK2BACB30NW6K5
BOLT, 100 DEG
HEX DR
BACB30NW6K5X
BOLT, 100 DEG
HEX DR
BACB30NW6K5Y
(b)HI-LOK6BACB30NW6K6
BOLT, 100 DEG
HEX DR
BACB30NW6K6X
(b)BOLT3BACB30NW6K7
BOLT, 100 DEG
HEX DR
BACB30NW6K7X
(b)HI-LOK3BACB30NW6K8
BOLT, PROTRUD-
ING HD
BACB30NX6K4X
BOLT, PROTRUD-
ING HD
BACB30NX6K5X
BOLT, PROTRUD-
ING HD
BACB30NX6K6X
BOLT, PROTRUD-
ING HD
BACB30NX6K6Y
BOLT, PROTRUD-
ING HD
BACB30NX6K7X
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
31 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 32

ALL
KIT 015U1848-2
NOTES
Existing Part
NumberName
Figure
New Part Number
2620
QTY
BOLT, PROTRUD-
ING HD
BACB30NX6K8X
BOLT, PROTRUD-
ING HD
BACB30NX6K9X
BOLT, PROTRUD-
ING HD
BACB30NX8K11X
BOLT, PROTRUD-
ING HD
BACB30NX8K8X
BOLT, 100 DEG
HEAD
BACB30VF3K5
BOLTBACB30VT6K4
BOLTBACB30VT6K5
BOLTBACB30VT6K6
BOLTBACB30VT6K8
BOLTBACB30VT8K4
HI-LOKBACB30VT8K6
(b)BOLT, 100 DEG
HEX DR
2BACB30YP6K3
(b)BOLT, 100 DEG
HEX DR
4BACB30YP6K4
COLLARBACC30AC6
COLLARBACC30BH6
COLLARBACC30BH8
COLLAR8BACC30BL6
COLLARBACC30BL8
COLLARBACC30M10
COLLAR40BACC30M6
COLLARBACC30M8
COLLARBACC30R6
FILLERBACF3F013R046NN
TAPERED FILLERBACF3T01F35-20
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
32 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 33

ALL
KIT 015U1848-2
NOTES
Existing Part
NumberName
Figure
New Part Number
2620
QTY
NUTBACN10HR4CD
(a)NUT11BACN10JC3C
NUTBACN10JC4C
NUTBACN10JC4CM
NUTBACN10YR3CD
SHIM, LAMINAT-
ED
BACS40R008C008F
SHIM, LAMINAT-
ED
BACS40R008C020F
SHIM,LAMINATEDBACS40R008D031F
SHIM, LAMINAT-
ED
BACS40R010B010F
SHIM LAMINATEDBACS40R020C030F
SHIM ,LAMINAT-
ED
BACS40R020C035F
WASHERBACW10BN3AC
(a)WASHER, PLAIN
AND COUNTER-
SUNK
11BACW10BP31NPK
WASHERBACW10BP3PK
WASHER, PLAINBACW10BP41CK
WASHER, PLAINBACW10BP41NPK
WASHER, PLAIN
AND COUNTER-
SUNK
BACW10BP41PK
WASHER, PLAINBACW10BP4NPK
WASHERBACW10CA104CCU
WASHERBACW10CA31CVU
WASHER, SELF-
ALIGN
BACW10CA41CVU
WASHERBACW10CA5CCU
(a) There are more parts than are necessary.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
33 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 34

ALL
KIT 015U1848-2
NOTES
Existing Part
NumberName
Figure
New Part Number
2620
QTY
(b) If grip length shown is not available at Boeing, fasteners supplied in kits may
be one grip length longer than indicated. Also, if any fastener part numbers
listed are not available or have been superseded, substitute fasteners may be
supplied in kits. Boeing Document D-590 and Boeing Drawing 012W6100 are
used to determine the part numbers used as substitutes.
KIT 015U1848-3
NotesNameQTYNew Part Number
(b)BOLT2BACB30NM3K4
(b)BOLT2BACB30NM3K7
(b)BOLT15BACB30NW6K4
(b)BOLT, HILOK2BACB30NW6K5
(b)HI-LOK6BACB30NW6K6
(b)BOLT3BACB30NW6K7
(b)HI-LOK3BACB30NW6K8
(b)BOLT, 100 DEG
HEAD
2BACB30VF3K5
(a) (b)BOLT38BACB30VT6K4
(b)BOLT4BACB30VT6K5
(a) (b)HI-LOK22BACB30VT8K6
(b)BOLT, 100 DEG
HEX DR
2BACB30YP6K3
(b)BOLT, 100 DEG
HEX DR
4BACB30YP6K4
(a)COLLAR50BACC30BL6
(a)COLLAR22BACC30BL8
(a)NUT21BACN10YR3CD
(a)WASHER4BACW10BN3AC
WASHER, PLAIN
AND COUNTER-
SUNK
2BACW10BP31NPK
(a)WASHER19BACW10BP3PK
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
34 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 35

KIT 015U1848-3
NotesNameQTYNew Part Number
(a) There are more parts than are necessary.
(b) If grip length shown is not available at Boeing, fasteners
supplied in kits may be one grip length longer than in-
dicated. Also, if any fastener part numbers listed are
not available or have been superseded, substitute
fasteners may be supplied in kits. Boeing Document
D-590 and Boeing Drawing 012W6100 are used to
determine the part numbers used as substitutes.
2. Parts and Materials Supplied by the Operator
NotesNameQTYPart Number /
Specification
(a)Chemical Conversion Coating4 ozTYPE 2, CLASS A
(b)Primer4 ozBMS 10-11, TYPE I
(b)Protective Enamel4 ozBMS 10-60, TYPE I
(b)Sealant8 ozBMS 5-95, CLASS B
This part is optional. (c)BRACKET ASSY1SB747-53A2784-1
(a) Refer to SOPM 20-43-03 for material source.
(b) See the Qualified Products List at the end of the Boeing Material Specification (BMS)
for supplier data.
(c) Fabricate from 2024-T0 Aluminum, size 0.040 x 3.5 x 8.0 inch as shown in FIGURE 17.
If a 015U1848-1 top kit is used to accomplish this service bulletin and the 015U1848-3 supplemental
kit cannot be supplied by Boeing, it may be necessary for the parts identified in the 015U1848-3
supplemental kit to be supplied by the operator. Refer to Paragraph 2.C.1., Kits/Parts.
3. Parts Modified and Reidentified
The parts shown below are changed as shown in this service bulletin. The quantity (QTY) is the
number of parts changed on each airplane.
NotesNew Part NumberNameQTYExisting Part
Number
(a)(b)BRACKET ASSY1232U1361-72
(a) The change given in this service bulletin is optional to fabricating a new bracket assembly.
(b) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change given in this service bulletin was made.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
35 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 36

4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
36 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 37

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Hole dimensions for standard solid rivets are given in 747 SRM, Chapter 51
– Torque limits to tighten nuts and bolts are given in 747 SRM, Chapter 51
4. For approved fastener and process material substitutions, refer to 747 SRM, Chapter
51. Alternate fasteners are given in 747 SRM Chapter 51 and Boeing Drawing
012W6100.
5. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures,
and SWPM 20-10-19 for the wire separation requirements.
6. If the length of any fastener specified in this service bulletin does not meet the
installation standards given in SRM Chapter 51, then a fastener of the same
specification, or an approved substitute, with a length which meets the installation
standards given in SRM Chapter 51 may be used.
7. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
8. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance unless otherwise
specified. A mirror may be necessary to ensure visual access to all surfaces in the
inspection area. This level of inspection is made under normal available lighting
conditions such as daylight, hangar lighting, flashlight or drop-light and may require
removal or opening of access panels or doors. Stands, ladders or platforms may be
required to gain proximity to the area being checked.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
37 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 38

9. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
10. When the wire bundle inspections and/or repairs disrupt the wire continuity or result
in disconnecting a connector, do the appropriate system functional test for the wire
bundles which have been repaired or the connectors which have unmated in
accordance with the appropriate section of the 747 AMM.
11. The maximum gap before fastener pull-up is 0.005 inch. If a gap exceeds 0.005 inch,
shim as required. The maximum allowable shim thickness is 0.032 inch unless
otherwise stated.
12. Unless otherwise specified in the service bulletin Figures, maintain 2D minimum
edge margin on all parts. 1.7D minimum edge margin or edge margins in accordance
with 747-400 SRM 51-40-06 , 747-400F SRM 51-40-06 or 747-400SF SRM 51-40-06
are acceptable if limited by adjacent structure.
13. Unless otherwise specified in the service bulletin Figures, it is acceptable to install
fasteners that are 1/32 inch larger than the existing production fasteners. This does
not apply to fastener locations that are already oversized during accomplishment of
the web replacement instructions in this service bulletin.
14. For all parts that are installed using permanent fasteners, install parts wet with BMS
5-95, CLASS B sealant applied between mating surfaces. Install all permanent
fasteners and fasteners common to the skin wet with BMS 5-95, CLASS B sealant.
B. WORK INSTRUCTIONS
PART 1 - ACCESS
1. Remove the pilot's seats as necessary. Refer to 747-400 AMM 25-11-01 as an accepted procedure.
2. Get access to the web and intercostal in accordance with FIGURE 1.
3. Do PART 2.
PART 2 - MEASURE WEB THICKNESS
1. Measure the thickness of the web in accordance with FIGURE 2.
a. If the web is between 0.136 and 0.145 inch thick, no more work is required. Do PART 6.
b. If the web is between 0.078 and 0.083 inch thick and no repair doubler is installed on the web,
do PART 3.
c. If the web is between 0.078 and 0.083 inch thick and a repair doubler is installed on the web,
do PART 4.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
38 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 39

PART 3 - 0.078-0.083 INCH THICK WEB WITH NO REPAIR DOUBLER INSTALLED
1. Do a detailed inspection for cracks and a general visual inspection for missing fasteners of the
STA 320 crown frame in accordance with FIGURE 3.
a. If any crack is found in the upper or lower chord, contact Boeing for repair instructions and
do the repair.
b. If any crack is found in the web, do PART 5 - WEB REPLACEMENT.
c. If no crack is found in the web, do one of the following options:
NOTE: Option 2 allows operators to do a High Frequency Eddy Current (HFEC) inspection
of the web. If no cracks are found, web replacement can be delayed. Refer to
Paragraph 1.E., Compliance.
(1) OPTION 1: Do PART 5 - WEB REPLACEMENT.
(2) OPTION 2: Do a HFEC inspection for cracks in the web in accordance with FIGURE 5.
(a) If any crack is found, do PART 5 - WEB REPLACEMENT.
(b) If no cracks are found, do the following:
1) If the general visual inspection determined that any fastener was missing, install
new fasteners at locations where fasteners are missing. Install fasteners in
accordance with web replacement FIGURE 13, except install a nominal size
fastener, not an oversize fastener.
2) Do PART 5 - WEB REPLACEMENT at the time given in Paragraph 1.E.,
Compliance.
PART 4 - WEB WITH REPAIR DOUBLER INSTALLED
1. Do a detailed inspection for cracks in the upper chord and lower chord of the STA 320 crown frame
in accordance with FIGURE 3.
NOTE: It is not necessary to inspect the web for cracks or to inspect for missing fasteners.
a. If any crack is found in the upper or lower chord, contact Boeing for repair instructions and
do the repair.
2. Do PART 5 - WEB REPLACEMENT.
PART 5 - WEB REPLACEMENT
1. Remove access panels in accordance with FIGURE 6.
2. Remove straps, tees, angles, stiffeners, clip and bracket in accordance with FIGURE 7.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
39 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 40

a. Remove fasteners common to the forward edge of the upper chord and the skin as necessary
to allow fasteners common to the STA 320 frame web to be removed in accordance with
FIGURE 25.
3. Chamfer/trim and inspect the sill chord as necessary and remove the lower chord in accordance
with FIGURE 8.
a. If any crack is found in the sill chord, contact Boeing for instructions and do the work instructed
by Boeing.
4. Remove the following intercostals in accordance with FIGURE 9:
– LBL 7.5, between STA 320 and STA 340
– LBL 15.0, between STA 320 and STA 340
5. Remove the following intercostals in accordance with FIGURE 10:
– RBL 7.5, between STA 320 and STA 340
– RBL 15.0, between STA 320 and STA 340
6. Remove the existing web in accordance with FIGURE 11.
a. Remove fasteners common to the forward edge of the upper chord and the skin as necessary
to allow fasteners common to the STA 320 frame web to be removed in accordance with
FIGURE 25.
7. Do HFEC inspections of the lower chord in accordance with FIGURE 12.
a. If any crack is found around a fastener hole, contact Boeing for repair instructions and do the
repair.
8. Install the new web in accordance with FIGURE 13.
9. Install the RBL 15.0 intercostal between STA 320 and STA 340 in accordance with FIGURE 14.
10. Install the LBL 15.0 intercostal between STA 320 and STA 340 in accordance with FIGURE 15.
11. Install the lower chord and splice in accordance with FIGURE 16.
12. Modify the existing or make a new drip shield bracket in accordance with FIGURE 17.
13. Install straps, tees, angles, stiffeners, clip and bracket in accordance with FIGURE 18.
14. Install new intercostals, tees and straps in accordance with FIGURE 19.
15. Install fasteners, if removed, common to the forward edge of the upper chord and the skin in
accordance with FIGURE 26.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
40 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 41

16. Install access panels in accordance with FIGURE 20.
17. Apply TYPE 2, CLASS A chemical conversion coating to any bare aluminum. Apply BMS 10-11,
TYPE I primer (as necessary) and BMS 10-60, TYPE I protective enamel to the visible surfaces
of all new parts and of any existing parts where paint was removed.
18. Do PART 6 - CLOSE ACCESS.
PART 6 - CLOSE ACCESS
1. Close access in accordance with FIGURE 21.
2. Install the pilot's seats as necessary. Refer to 747-400 AMM 25-11-01 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
4. If PART 5 - WEB REPLACEMENT has been done, do the post replacement inspections at the
times given in paragraph 1.E., Compliance.
PART 7 - POST WEB REPLACEMENT INSPECTIONS
1. Remove the pilot's seats as necessary. Refer to 747-400 AMM 25-11-01 as an accepted procedure.
2. Get access to the web in accordance with FIGURE 1.
3. Remove access panels in accordance with FIGURE 22.
4. Do detailed inspections of the web, upper chord, lower chord and lower chord splice for cracks in
accordance with FIGURE 23.
a. No crack found, repeat the post web replacement inspection at the time given in paragraph
1.E., Compliance.
b. If any crack is found, contact Boeing for repair instructions and do the repair.
5. Install access panels in accordance with FIGURE 24.
6. Close access in accordance with FIGURE 21.
7. Install the pilot's seats as necessary. Refer to 747-400 AMM 25-11-01 as an accepted procedure.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1: September 14, 2011
41 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 42 (OCR)

BOEING SERVICE BULLETIN 747-53A2784
STA 360 -
STA 300
1698738
FIGURE 1: STA 300 TO STA 340 CROWN - ACCESS
(SHEET 1 OF 3)
Original Issue: August 27, 2009
Revision 1 September 14, 2011  747-53A2784
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  42 of 237

### Page 43 (OCR)

BOEING SERVICE BULLETIN 747-53A2784
STA
,360
STA
340
STA
_320
STA
300
TYPICAL
1698740
FIGURE 1: STA 300 TO STA 340 CROWN - ACCESS
(SHEET 2 OF 3)
Original Issue: August 27, 2009
Revision 1 September 14, 2011  747-53A2784
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  43 of 237

### Page 44

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b)--Ceiling liningRemove / Keep1
(a) (c)--Sidewall liningRemove / Keep2
(a) (d) (g)--Overhead equipment
panels
Remove / Keep3
(a) (e) (g)--Disconnect PanelsRemove / Keep
(a) (f) (g)--Wire bundlesRemove / Keep
(a) (h)--Air conditioningRemove / Keep4
(a)--Overhead equipment
support structure
Remove / Keep5
(a) (i)--Dripshields and Insula-
tion
Remove / Keep6
(j)--Any other obstructionsRemove / Keep7
(a) Remove parts as necessary to get access to the STA 320 crown and the BL 0 intercostal from STA 320
to STA 340 for inspection and the STA 300 to STA 340 crown for web replacement.
(b) Refer to 747-400 AMM 25-14-00 and 747-400 AMM 25-22-00 as an accepted procedure.
(c) Remove the sidewall lining from the window posts shown. Refer to 747-400 AMM 25-15-00 and 747-400
AMM 25-21-00 as an accepted procedure.
(d) Remove overhead equipment panels from STA 300 to STA 360. Disconnect any wires as necessary.
(e) Remove disconnect panels behind the removed overhead equipment panels.
(f) Remove wire bundles common to the removed overhead equipment panels. Remove all remaining overhead
wire bundles from STA 300 to STA 340.
(g) Refer to 747-400 AMM 31-00-00 as an accepted procedure.
(h) Remove air conditioning equipment as required to allow removal of the overhead equipment support
structure. Remove all remaining air conditioning equipment between STA 300 and STA 340.
(i) Remove dripshields and insulation from STA 300 to STA 340. Refer to 747-400 AMM 25-14-01 as an
accepted procedure.
(j) Remove any other parts as necessary to get access to the STA 320 crown and the BL 0 intercostal from
STA 300 to STA 340 for inspection and the STA 300 to STA 340 crown for web replacement. Refer to
747-400 AMM for accepted procedures.
FIGURE 1: STA 300 TO STA 340 CROWN - ACCESS
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1 September 14, 2011
44 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 45 (OCR)

BOEING SERVICE BULLETIN 747-53A2784
BLO  STA 340
— STA 320
1698742
FIGURE 2: STA 320 CROWN FRAME - WEB THICKNESS MEASUREMENT
(SHEET 1 OF 2)
Original Issue: August 27, 2009
Revision 1 September 14, 2011  BOEING PROPRIETARY -  747-53A2784
Copyright © Unpublished Work - See page 1 for details.  45 of 237

### Page 46

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a)--WEBMeasure1
(a) Measure the thickness of the web.
FIGURE 2: STA 320 CROWN FRAME - WEB THICKNESS MEASUREMENT
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1 September 14, 2011
46 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 47 (OCR)

BOEING SERVICE BULLETIN 747-53A2784
BLO  STA 340
— STA 320
1698743
FIGURE 3: STA 320 CROWN FRAME - INSPECTION
(SHEET 1 OF 4)
Original Issue: August 27, 2009
Revision 1 September 14, 2011  BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  47 of 237

### Page 48 (OCR)

BOEING SERVICE BULLETIN 747-53A2784
BLO
RBL
30.0
A
STA
320
LBL
30.0
SOME STRUCTURE NOT SHOWN FOR CLARITY
1698744
FIGURE 3: STA 320 CROWN FRAME - INSPECTION
(SHEET 2 OF 4)
Original Issue: August 27, 2009
Revision 1 September 14, 2011  BOEING PROPRIETARY -  747-53A2784
Copyright © Unpublished Work - See page 1 for details.  48 of 237

### Page 49

FIGURE 3: STA 320 CROWN FRAME - INSPECTION
(SHEET 3 OF 4)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1 September 14, 2011
49 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 50

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a)--WebInspect1
(b)--Upper chordInspect2
(b)--Lower chordInspect3
(c)--FastenersInspect4
(a) Do a detailed inspection of the visible surfaces of the web for any crack.
(b) Do a detailed inspection of the visible surfaces of the chord from LBL 30.0 to RBL 30.0 for any crack
around fastener locations common to the web.
(c) Do a general visual inspection to make sure all fasteners are installed at fastener locations common to
the web and lower chord. Fasteners are expected at the locations shown.
FIGURE 3: STA 320 CROWN FRAME - INSPECTION
(SHEET 4 OF 4)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1 September 14, 2011
50 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 51 (OCR)

BOEING SERVICE BULLETIN 747-53A2784
THIS FIGURE IS DELETED.
D38438
FIGURE 4: DELETED
(SHEET 1 OF 1)
Original Issue: August 27, 2009
Revision 1 September 14, 2011  BOEING PROPRIETARY -  747-53A2784
Copyright © Unpublished Work - See page 1 for details.  51 of 237

### Page 52 (OCR)

BOEING SERVICE BULLETIN 747-53A2784
BLO  STA 340
— STA 320
1698747
FIGURE 5: STA 320 CROWN FRAME - WEB INSPECTION
(SHEET 1 OF 5)
Original Issue: August 27, 2009
Revision 1 September 14, 2011  BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.

### Page 53

FIGURE 5: STA 320 CROWN FRAME - WEB INSPECTION
(SHEET 2 OF 5)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1 September 14, 2011
53 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 54 (OCR)

BOEING SERVICE BULLETIN 747-53A2784
LBL  6 LOCATIONS  BL O
5 LOCATIONS  7.5
LBL
15.0
6 LOCATIONS  *++++=
LBL
20.0
5 LOCATIONS  6 LOCATIONS
4 LOCATIONS
A-A
-*- REFERENCE FASTENERS
FIGURE 5: STA 320 CROWN FRAME - WEB INSPECTION
(SHEET 3 OF 5)
Original Issue: August 27, 2009
Revision 1 September 14, 2011  BOEING PROPRIETARY -  747-53A2784
Copyright © Unpublished Work - See page 1 for details.  54 of 237

### Page 55 (OCR)

BOEING SERVICE BULLETIN 747-53A2784
BLO  5 LOCATIONS  LBL
7.5  5 LOCATIONS
(2
LBL
15.0
6 LOCATIONS
LBL
20.0
5 LOCATIONS  5 LOCATIONS
4 LOCATIONS
B-B
-* REFERENCE FASTENERS
1733670
FIGURE 5: STA 320 CROWN FRAME - WEB INSPECTION
(SHEET 4 OF 5)
Original Issue: August 27, 2009
Revision 1 September 14, 2011  747-53A2784
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  55 of 237

### Page 56

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a)165B07603-34WEBInspect1
(b)165B07603-34WEBInspect2
(a) Do a HFEC inspection for cracks in the web at the six circular cutouts noted by step 1. At each cutout lo-
cation, inspect both the edge of the cutout (on the 0.080 inch thickness) and the surface around the cutout.
Do the inspections in accordance with 747 NDT PART 6, 51-00-00, Figure 4 or Figure 23. Only the six
cutouts noted by step 1 require inspection.
(b) Do a HFEC inspection of the aft surface of the web for any crack around the fastener heads at the fastener
locations shown, in accordance with 747 NDT PART 6, 51-00-00, Figure 4 or Figure 23.
FIGURE 5: STA 320 CROWN FRAME - WEB INSPECTION
(SHEET 5 OF 5)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 27, 2009
747-53A2784Revision 1 September 14, 2011
56 of 237
BOEING SERVICE BULLETIN 747-53A2784

### Page 57 (OCR)

BOEING SERVICE BULLETIN 747-53A2784
BLO  STA 340
B
— STA 320
1698728
FIGURE 6: STA 300 TO STA 340 CROWN - ACCESS PANEL REMOVAL
(SHEET 1 OF 6)
Original Issue: August 27, 2009
Revision 1 September 14, 2011  747-53A2784
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  57 of 237

### Page 58 (OCR)

BOEING SERVICE BULLETIN 747-53A2784
1698729
FIGURE 6: STA 300 TO STA 340 CROWN - ACCESS PANEL REMOVAL
(SHEET 2 OF 6)
Original Issue: August 27, 2009
Revision 1 September 14, 2011  747-53A2784
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  58 of 237

### Page 59 (OCR)

BOEING SERVICE BULLETIN 747-53A2784
STA
320
B
LBL  A-A
28.0  REFERENCE
FASTENER
B-B  C-C  1698730
FIGURE 6: STA 300 TO STA 340 CROWN - ACCESS PANEL REMOVAL
(SHEET 3 OF 6)
Original Issue: August 27, 2009
Revision 1 September 14, 2011  BOEING PROPRIETARY -  747-53A2784
Copyright © Unpublished Work - See page 1 for details.  59 of 237

### Page 60 (OCR)

BOEING SERVICE BULLETIN 747-53A2784
C
1698731
FIGURE 6: STA 300 TO STA 340 CROWN - ACCESS PANEL REMOVAL
(SHEET 4 OF 6)
Original Issue: August 27, 2009
Revision 1 September 14, 2011  747-53A2784
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  60 of 237

The text continues at https://openairdocs.org/service-documents/boeing/747-53a2784/file/8595562ae66e.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
