# Boeing Alert Service Bulletin 747-53A2852: No revision named, from page 85

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2015-3983; AD 2016-07-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 747-53A2852](https://openairdocs.org/service-documents/boeing/747-53a2852.md)
- Title as filed: U.S. DOT/FAA - SB-747-53A2852-00
- Pages: 189
- PDF: https://openairdocs.org/files/sha256/5f/45/5f45669c09d2afd8c3b03cedac261fedbc9611f8ef2972ef20448774a7835e0a
- Page: https://openairdocs.org/service-documents/boeing/747-53a2852/file/5f45669c09d2

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 85

Upper Deck Floor Beam Station (STA) 740 on airplanes that use one of the following drawing installations:
65B06828-1 or -21
NotesExisting Part NumberNameQTYPart Number /
Specification
(c)-Collar16BACC30M8
(c) (d)BACR15BB4D*Rivet152BACR15BB4D4C or
BACR15BB5D*C
(c) (d)BACR15BB4D*Rivet2BACR15BB4D5C or
BACR15BB5D*C
(c) (d)BACR15BB5D*Rivet7BACR15BB5D5C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet27BACR15BB5D6C or
BACR15BB6D*C
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Upper Deck Floor Beam Station (STA) 740 on airplanes that use one of the following drawing installations:
65B06828-118 or -123
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B06828-119 or
65B06828-124
Upper Chord165B06828-119 or
65B06828-124
(a) (b)65B06828-49Reinforcement Angle L/H165B06828-49
(a) (b)65B06828-50Reinforcement Angle R/H165B06828-50
(c) (d)BACB30MY8K*Bolt8BACB30MY8K6X
(c) (d)BACB30MY8K*Bolt8BACB30MY8K7X
(c) (d)BACB30MY5K*Bolt4BACB30MY6K3
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
85 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 86

Upper Deck Floor Beam Station (STA) 740 on airplanes that use one of the following drawing installations:
65B06828-118 or -123
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACB30MY5K*Bolt90BACB30MY6K4
(c) (d)BACB30MY5K*Bolt23BACB30MY6K5
(c) (d)BACB30MY5K*Bolt4BACB30MY6K6
(c) (d)BACB30MY6K*Bolt2BACB30NX6K4X
(c) (d)BACB30MY6K*Bolt10BACB30NX6K5X
(c) (d)BACB30MY6K*Bolt4BACB30NX6K6X
(c) (d)BACB30FN5*Bolt2BACB30NW6K4
(c) (d)BACB30FN6*Bolt6BACB30NW6K4X
(c) (d)BACB30NW6K*Bolt6BACB30NW6K4X
(c) (d)BACB30FN6*Bolt6BACB30NW6K5X
(c) (d)BACB30NW6K*Bolt6BACB30NW6K5X
(c) (d)BACB30FN6*Bolt12BACB30NW6K6X
(c) (d)BACB30NW6K*Bolt12BACB30NW6K6X
(c) (d)BACB30NW5K*Bolt2BACB30YP6K4
(c)-Collar2BACC30BL6
(c)-Collar16BACC30BH6
(c)-Collar171BACC30M6
(c)-Collar16BACC30M8
(c) (d)BACR15BB5D*Rivet127BACR15BB5D5C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet24BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BA6D*Rivet2BACR15BA6D9C or
BACR15BA7D*C
(c) (d)BACR15BA3B*Rivet2BACR15BA3D5C or
BACR15BA4D*C
(c) (d)BACR15CE5D*Rivet4BACR15GF4D4 or
BACR15GF5D*
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
86 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 87

Upper Deck Floor Beam Station (STA) 740 on airplanes that use one of the following drawing installations:
65B06828-118 or -123
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Upper Deck Floor Beam Station (STA) 740 on airplanes that use one of the following drawing installations:
65B06828-104, -117, or -122
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B06828-105 or
65B26467-20
Upper Chord165B06828-105 or
65B26467-20
(a) (b) (g)65B06828-107 or
65B26467-29
Reinforcement Angle165B06828-107 or
65B26467-29
(c) (d)BACB30MY8K*Bolt16BACB30MY8K7X
(c) (d)BACB30MY5K*Bolt80BACB30MY6K4
(c) (d)BACB30MY5K*Bolt16BACB30MY6K5
(c) (d)BACB30MY5K*Bolt16BACB30MY6K6
(c) (d)BACB30MY6K*Bolt4BACB30NX6K6X
(c) (d)BACB30NX6K*Bolt2BACB30NX6K4X
(c) (d)BACB30NW6K*Bolt4BACB30NW6K4X
(c) (d)BACB30NW6K*Bolt4BACB30NW6K5X
(c) (d)BACB30NW6K*Bolt14BACB30NW6K6X
(c)-Collar8BACC30BH6
(c)-Collar138BACC30M6
(c)-Collar16BACC30M8
(c) (d)BACR15BB5D*Rivet145BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet13BACR15BB5D7C or
BACR15BB6D*C
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
87 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 88

Upper Deck Floor Beam Station (STA) 740 on airplanes that use one of the following drawing installations:
65B06828-104, -117, or -122
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACR15BB6D*Rivet6BACR15BB6D7C or
BACR15BB7D*C
(c) (d)BACR15BA6D*Rivet2BACR15BA6D9C or
BACR15BA7D*C
(c) (d)BACR15BA3D*Rivet4BACR15BA3D6C or
BACR15BA4D*C
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
(g) Some airplanes have a full length reinforcement angle. Refer to APPENDIX A for effectivity.
Upper Deck Floor Beam Station (STA) 760 for Groups 1-4, except RD231-RD235
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B37122-110 or
65B37122-23 or
65B37122-30 or
65B37122-61 or
65B37122-66 or
65B37122-71 or
65B37122-9 or
65B37122-96
Upper Chord165B37122-110 or
65B37122-23 or
65B37122-30 or
65B37122-61 or
65B37122-66 or
65B37122-71 or
65B37122-9 or
65B37122-96
(a) (b)65B37122-27 or
65B37122-3 or
65B37122-36
Reinforcement Angle L/H165B37122-27 or
65B37122-3 or
65B37122-36
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
88 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 89

Upper Deck Floor Beam Station (STA) 760 for Groups 1-4, except RD231-RD235
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B37122-28 or
65B37122-4 or
65B37122-37
Reinforcement Angle R/H165B37122-28 or
65B37122-4 or
65B37122-37
(c) (d)BACB30MY8K*Bolt8BACB30MY8K6X
(c) (d)BACB30MY8K*Bolt16BACB30MY8K7X
(c) (d)BACB30FM5*Bolt4BACB30VT6K3
(c) (d)BACB30FM5*Bolt98BACB30VT6K4
(c) (d)BACB30FM5*Bolt24BACB30VT6K5
(c) (d)BACB30FM5*Bolt6BACB30VT6K6
(c) (d)BACB30FM5*Bolt2BACB30VT6K7
(c) (d)BACB30FM5*Bolt2BACB30VT6K8
(c) (d)BACB30FM6*Bolt4BACB30NX6K3X
(c) (d)BACB30FM6*Bolt5BACB30NX6K5X
(c) (d)BACB30FM6*Bolt10BACB30NX6K6X
(c) (d)BACB30FM6*Bolt14BACB30NX6K7X
(c) (d)BACB30FM6*Bolt2BACB30NX6K13X
(c) (d)BACB30NX6K*Bolt2BACB30NX6K6X
(c) (d)BACB30NX6K*Bolt2BACB30NX6K7X
(c) (d)BACB30FN5*Bolt2BACB30NW6K4
(c) (d)BACB30FN6*Bolt11BACB30NW6K4X
(c) (d)BACB30FN6*Bolt12BACB30NW6K5X
(c) (d)BACB30FN6*Bolt21BACB30NW6K6X
(c)-Collar49BACC30BH6
(c)-Collar136BACC30BL6
(c)-Collar48BACC30M6
(c)-Collar24BACC30M8
(c) (d)BACR15BB5D*Rivet141BACR15BB5D5C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet24BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet9BACR15BB5D7C or
BACR15BB6D*C
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
89 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 90

Upper Deck Floor Beam Station (STA) 760 for Groups 1-4, except RD231-RD235
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACR15BB5D*Rivet8BACR15BB5D9C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet4BACR15BB6D6C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet2BACR15BB6D9C or
BACR15BB7D*C
(c) (d)BACR15BA3B*Rivet8BACR15BA3D6C or
BACR15BA4D*C
(c) (d)BACR15BA6D*Rivet6BACR15BA6D6C or
BACR15BA7D*C
(c) (d)BACR15BA6D*Rivet3BACR15BA6D9C or
BACR15BA7D*C
(c) (d)BACR15CE6D*Rivet4BACR15GF6D5 or
BACR15GF7D*
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Group 5-6:
Upper Deck Floor Beam Station (STA) 760
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B37122-76 or
65B26467-1
Upper Chord165B37122-76 or
65B26467-1
(a) (b)65B37122-79 or
65B26467-3
Reinforcement Angle L/H165B37122-79 or
65B26467-3
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
90 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 91

Group 5-6:
Upper Deck Floor Beam Station (STA) 760
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B37122-80 or
65B26467-4
Reinforcement Angle R/H65B37122-80 or
65B26467-4
(c) (d)BACB30MY8K*Bolt12BACB30MY8K7X
(c) (d)BACB30MY8K*Bolt6BACB30MY8K8X
(c) (d)BACB30MY5K*Bolt78BACB30MY6K4
(c) (d)BACB30MY5K*Bolt18BACB30MY6K5
(c) (d)BACB30MY6K*Bolt4BACB30NX6K4X
(c) (d)BACB30MY6K*Bolt16BACB30NX6K5X
(c) (d)BACB30MY6K*Bolt2BACB30NX6K6X
(c) (d)BACB30NX6K*Bolt6BACB30NX6K3X
(c) (d)BACB30NX6K*Bolt2BACB30NX6K4X
(c) (d)BACB30NW6K*Bolt8BACB30NW6K4X
(c) (d)BACB30NW6K*Bolt14BACB30NW6K5X
(c) (d)BACB30NW6K*Bolt12BACB30NW6K6X
(c)-Collar34BACC30BL6
(c)-Collar30BACC30BH6
(c)-Collar130BACC30M6
(c)-Collar18BACC30M8
(c) (d)BACR15BB5D*Rivet26BACR15BB5D5C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet113BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet9BACR15BB5D7C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet1BACR15BB6D6C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet7BACR15BB6D7C or
BACR15BB7D*C
(c) (d)BACR15BA6D*Rivet2BACR15BA6D9C or
BACR15BA7D*C
(c) (d)BACR15BA3D*Rivet4BACR15BA3D6C or
BACR15BA4D*C
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
91 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 92

Group 5-6:
Upper Deck Floor Beam Station (STA) 760
NotesExisting Part NumberNameQTYPart Number /
Specification
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Upper Deck Floor Beam Station (STA) 760 for RD231-RD235
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B37122-96Chord-Upper165B37122-96
(a) (b)65B37122-36Reinforcement Angle L/H165B37122-36
(a) (b)65B37122-37Reinforcement Angle R/H165B37122-37
(c) (d)BACB30MY8K*Bolt16BACB30MY8K7X
(c) (d)BACB30MY5K*Bolt2BACB30MY6K3
(c) (d)BACB30MY5K*Bolt93BACB30MY6K4
(c) (d)BACB30MY5K*Bolt21BACB30MY6K5
(c) (d)BACB30MY6K*Bolt2BACB30NX6K3X
(c) (d)BACB30MY6K*Bolt3BACB30NX6K5X
(c) (d)BACB30MY6K*Bolt4BACB30NX6K6X
(c) (d)BACB30MY6K*Bolt12BACB30NX6K7X
(c) (d)BACB30FN5*Bolt2BACB30NW6K4
(c) (d)BACB30NW6K*Bolt8BACB30NW6K4X
(c) (d)BACB30NW6K*Bolt12BACB30NW6K5X
(c) (d)BACB30NW6K*Bolt21BACB30NW6K6X
(c)-Collar21BACC30BH6
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
92 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 93

Upper Deck Floor Beam Station (STA) 760 for RD231-RD235
NotesExisting Part NumberNameQTYPart Number /
Specification
(c)-Collar160BACC30M6
(c)-Collar16BACC30M8
(c) (d)BACR15BB5D*Rivet120BACR15BB5D5C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet21BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet1BACR15BB5D7C or
BACR15BB6D*C
(c) (d)BACR15CE6D*Rivet4BACR15GF6D5 or
BACR15GF7D*
(c) (d)BACR15BA6D*Rivet3BACR15BA6D9C or
BACR15BA7D*C
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Upper Deck Floor Beam Station (STA) 780 on airplanes that use one of the following drawing installations:
65B37123-1 or -161
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B37123-163 or
65B37123-205
Upper Chord165B37123-163 or
65B37123-205
(a) (b)65B37123-53 or
65B37123-206
Reinforcement Angle L/H165B37123-53 or
65B37123-206
(a) (b)65B37123-54 or
65B37123-207
Reinforcement Angle R/H165B37123-54 or
65B37123-207
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
93 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 94

Upper Deck Floor Beam Station (STA) 780 on airplanes that use one of the following drawing installations:
65B37123-1 or -161
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACB30MY8C*Bolt8BACB30MY8K6X
(c) (d)BACB30MY8C*Bolt8BACB30MY8K7X
(c) (d)BACB30FN5*Bolt2BACB30NW6K4
(c) (d)BACB30FN6*Bolt8BACB30NW6K4X
(c) (d)BACB30FN6*Bolt6BACB30NW6K5X
(c) (d)BACB30NW6K*Bolt1BACB30NW6K5X
(c) (d)BACB30FN6*Bolt14BACB30NW6K6X
(c) (d)BACB30NW6K*Bolt2BACB30NW6K7X
(c) (d)BACB30FM6*Bolt2BACB30NX6K3X
(c) (d)BACB30FM6*Bolt8BACB30NX6K4X
(c) (d)BACB30FM6*Bolt14BACB30NX6K5X
(c) (d)BACB30MB6*Bolt1BACB30NX6K7X
(c) (d)BACB30MB6*Bolt1BACB30NX6K8X
(c) (d)BACB30FM5*Bolt97BACB30VT6K4
(c) (d)BACB30FM5*Bolt15BACB30VT6K5
(c)-Collar112BACC30BL6
(c)-Collar26BACC30BH6
(c)-Collar33BACC30M6
(c)-Collar16BACC30M8
(c) (d)BACR15BA3B*Rivet4BACR15BA3D5C or
BACR15BA4D*C
(c) (d)BACR15BA3B*Rivet8BACR15BA3D6C or
BACR15BA4D*C
(c) (d)BACR15BA6D*Rivet2BACR15BA6D9C or
BACR15BA7D*C
(c) (d)BACR15BB5D*Rivet135BACR15BB5D5C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet22BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet1BACR15BB6D10C
or BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet2BACR15BB6D7C or
BACR15BB7D*C
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
94 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 95

Upper Deck Floor Beam Station (STA) 780 on airplanes that use one of the following drawing installations:
65B37123-1 or -161
NotesExisting Part NumberNameQTYPart Number /
Specification
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Upper Deck Floor Beam Station (STA) 780 on airplanes that use one of the following drawing installations:
65B37123-108, -116, -119, -130, -138, -145, -186, -188, -5001, -71, -76, -82, or -85
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B37123-72 or
65B37123-78 or
65B37123-103 or
65B37123-104 or
65B37123-105 or
65B37123-106 or
65B37123-109
Upper Chord165B37123-72 or
65B37123-78 or
65B37123-103 or
65B37123-104 or
65B37123-105 or
65B37123-106 or
65B37123-109
(a) (b)65B37123-53Reinforcement Angle L/H165B37123-53
(a) (b)65B37123-54Reinforcement Angle R/H165B37123-54
(c) (d)BACB30MY8C*Bolt8BACB30MY8K7X
(c) (d)BACB30MY8C*Bolt8BACB30MY8K8X
(c) (d)BACB30FN5*Bolt8BACB30NW6K4
(c) (d)BACB30FN5*Bolt2BACB30NW6K5
(c) (d)BACB30FN5*Bolt2BACB30NW6K6
(c) (d)BACB30FN6*Bolt9BACB30NW6K3X
(c) (d)BACB30FN6*Bolt11BACB30NW6K4X
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
95 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 96

Upper Deck Floor Beam Station (STA) 780 on airplanes that use one of the following drawing installations:
65B37123-108, -116, -119, -130, -138, -145, -186, -188, -5001, -71, -76, -82, or -85
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACB30FN6*Bolt13BACB30NW6K5X
(c) (d)BACB30FN6*Bolt5BACB30NW6K6X
(c) (d)BACB30FN6*Bolt6BACB30NW6K7X
(c) (d)BACB30FN6*Bolt17BACB30NW6K8X
(c) (d)BACB30FM6*Bolt2BACB30NX6K4X
(c) (d)BACB30GW6*Bolt2BACB30NX6K5X
(c) (d)BACB30FM6*Bolt11BACB30NX6K5X
(c) (d)BACB30FM6*Bolt6BACB30NX6K6X
(c) (d)BACB30FM6*Bolt12BACB30NX6K7X
(c) (d)BACB30FM5*Bolt2BACB30VT6K4
(c) (d)BACB30FM5*Bolt101BACB30VT6K5
(c) (d)BACB30FM5*Bolt23BACB30VT6K6
(c) (d)BACB30FM5*Bolt8BACB30VT6K7
(c)-Collar134BACC30BL6
(c)-Collar33BACC30BH6
(c)-Collar73BACC30M6
(c)-Collar16BACC30M8
(c) (d)BACR15BA6D*Rivet1BACR15BA6D8C or
BACR15BA7D*C
(c) (d)BACR15BA6D*Rivet1BACR15BA6D9C or
BACR15BA7D*C
(c) (d)BACR15BA6D*Rivet2BACR15BA6D12C
or BACR15BA7D*C
(c) (d)BACR15BB5D*Rivet76BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet16BACR15BB5D7C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet2BACR15BB5D8C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet55BACR15BB6D8C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet13BACR15BB6D9C or
BACR15BB7D*C
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
96 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 97

Upper Deck Floor Beam Station (STA) 780 on airplanes that use one of the following drawing installations:
65B37123-108, -116, -119, -130, -138, -145, -186, -188, -5001, -71, -76, -82, or -85
NotesExisting Part NumberNameQTYPart Number /
Specification
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Upper Deck Floor Beam Station (STA) 780 on airplanes that use one of the following drawing installations:
65B37123-120, -125, -148, -25, -60, or -65
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B37123-26 or
65B37123-101 or
65B37123-104 or
65B37123-127 or
65B37123-604
Upper Chord165B37123-26 or
65B37123-101 or
65B37123-104 or
65B37123-127 or
65B37123-604
(a) (b)65B37123-29Reinforcement Angle L/H165B37123-29
(a) (b)65B37123-30Reinforcement Angle R/H165B37123-30
(c) (d)BACB30MY6C*Bolt2BACB30MY6K6X
(c) (d)BACB30MY8C*Bolt8BACB30MY8K6X
(c) (d)BACB30MY8C*Bolt8BACB30MY8K8X
(c) (d)BACB30FN6*Bolt13BACB30NW6K3X
(c) (d)BACB30FN6*Bolt14BACB30NW6K4X
(c) (d)BACB30FN5*Bolt12BACB30NW6K5
(c) (d)BACB30FN6*Bolt46BACB30NW6K5X
(c) (d)BACB30FN6*Bolt8BACB30NW6K6X
(c) (d)BACB30FN6*Bolt3BACB30NW6K7X
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
97 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 98

Upper Deck Floor Beam Station (STA) 780 on airplanes that use one of the following drawing installations:
65B37123-120, -125, -148, -25, -60, or -65
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACB30FM6*Bolt6BACB30NX6K5X
(c) (d)BACB30FM6*Bolt8BACB30NX6K6X
(c) (d)BACB30FM6*Bolt12BACB30NX6K7X
(c) (d)BACB30FM6*Bolt2BACB30NX6K9X
(c) (d)BACB30FM6*Bolt2BACB30NX6K13X
(c) (d)BACB30FM5*Bolt69BACB30VT6K5
(c) (d)BACB30FM5*Bolt35BACB30VT6K6
(c) (d)BACB30FM5*Bolt2BACB30VT6K57
(c)-Collar106BACC30BL6
(c)-Collar30BACC30BH6
(c)-Collar98BACC30M6
(c)-Collar16BACC30M8
(c) (d)BACR15BB5D*Rivet73BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet21BACR15BB5D7C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet6BACR15BB6D7C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet52BACR15BB6D8C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet8BACR15BB6D9C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet1BACR15BB6D10C
or BACR15BB7D*C
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
98 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 99

Upper Deck Floor Beam Station (STA) 780 on airplanes that use one of the following drawing installations:
65B37123-120, -125, -148, -25, -60, or -65
NotesExisting Part NumberNameQTYPart Number /
Specification
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Upper Deck Floor Beam Station (STA) 780 on airplanes that use one of the following drawing installations:
65B37123-147
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B37123-150Upper Chord165B37123-150
(a) (b)65B37123-53Reinforcement Angle L/H165B37123-53
(a) (b)65B37123-54Reinforcement Angle R/H165B37123-54
(c) (d)BACB30MYC6*Bolt8BACB30MY8K6X
(c) (d)BACB30MYC6*Bolt8BACB30MY8K8X
(c) (d)BACB30FN5*Bolt2BACB30NW6K5
(c) (d)BACB30FN6*Bolt33BACB30NW6K5X
(c) (d)BACB30FN5*Bolt2BACB30NW6K6
(c) (d)BACB30FN6*Bolt2BACB30NW6K7X
(c) (d)BACB30FM6*Bolt2BACB30NX6K4X
(c) (d)BACB30FM6*Bolt4BACB30NX6K5X
(c) (d)BACB30GW6*Bolt1BACB30NX6K5X
(c) (d)BACB30FM6*Bolt4BACB30NX6K6X
(c) (d)BACB30FM6*Bolt10BACB30NX6K7X
(c) (d)BACB30FN5*Bolt103BACB30VT6K5
(c) (d)BACB30FN5*Bolt17BACB30VT6K6
(c) (d)BACB30FN5*Bolt8BACB30VT6K7
(c)-Collar130BACC30BL6
(c)-Collar21BACC30BH6
(c)-Collar39BACC30M6
(c)-Collar16BACC30M8
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
99 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 100

Upper Deck Floor Beam Station (STA) 780 on airplanes that use one of the following drawing installations:
65B37123-147
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACR15BB5D*Rivet76BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet10BACR15BB5D7C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet1BACR15BB5D8C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet52BACR15BB6D8C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet7BACR15BB6D9C or
BACR15BB7D*C
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Upper Deck Floor Beam Station (STA) 780 on airplanes that use one of the following drawing installations:
65B37123-180, -184, -185, -189, -190, or -195
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B37123-167 or
65B26467-1
Upper Chord165B37123-167 or
65B26467-1
(a) (b)65B37123-170 or
65B26467-3
Reinforcement Angle L/H165B37123-170 or
65B26467-3
(a) (b)65B37123-171 or
65B26467-4
Reinforcement Angle R/H165B37123-171 or
65B26467-4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
100 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 101

Upper Deck Floor Beam Station (STA) 780 on airplanes that use one of the following drawing installations:
65B37123-180, -184, -185, -189, -190, or -195
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACB30MY8C* or
BACB30MY8K*
Bolt14BACB30MY8K7X
(c) (d)BACB30MY8C* or
BACB30MY8K*
Bolt6BACB30MY8K8X
(c) (d)BACB30MY6K*Bolt78BACB30MY6K4
(c) (d)BACB30MY6K*Bolt18BACB30MY6K5
(c) (d)BACB30MY6K*Bolt4BACB30MY6K6
(c) (d)BACB30NW6K*Bolt8BACB30NW6K4X
(c) (d)BACB30NW6K*Bolt12BACB30NW6K5X
(c) (d)BACB30NW6K*Bolt15BACB30NW6K6X
(c) (d)BACB30NW6K*Bolt2BACB30NW6K7X
(c) (d)BACB30MY6K*Bolt6BACB30NX6K3X
(c) (d)BACB30NX6K*Bolt6BACB30NX6K3X
(c) (d)BACB30MY6K*Bolt2BACB30NX6K4X
(c) (d)BACB30NX6K*Bolt2BACB30NX6K4X
(c) (d)BACB30MY6K*Bolt16BACB30NX6K5X
(c) (d)BACB30NX6K*Bolt2BACB30NX6K8X
(c)-Collar34BACC30BH6
(c)-Collar150BACC30M6
(c)-Collar20BACC30M8
(c) (d)BACR15BA3D*Rivet4BACR15BA3D6C or
BACR15BA4D*C
(c) (d)BACR15BA6D*Rivet2BACR15BA6D9C or
BACR15BA7D*C
(c) (d)BACR15BB5D*Rivet136BACR15BB5D5C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet14BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet7BACR15BB6D6C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet1BACR15BB6D8C or
BACR15BB7D*C
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
101 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 102

Upper Deck Floor Beam Station (STA) 780 on airplanes that use one of the following drawing installations:
65B37123-180, -184, -185, -189, -190, or -195
NotesExisting Part NumberNameQTYPart Number /
Specification
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Upper Deck Floor Beam Station (STA) 780 on airplanes that use one of the following drawing installations:
65B37123-192
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B37123-105Upper Chord165B37123-105
(a) (b)65B37123-53Reinforcement Angle L/H165B37123-53
(a) (b)65B37123-54Reinforcement Angle R/H165B37123-54
(c) (d)BACB30MY5K*Bolt94BACB30MY6K5
(c) (d)BACB30MY5K*Bolt20BACB30MY6K6
(c) (d)BACB30MY5K*Bolt8BACB30MY6K7
(c) (d)BACB30MY8K*Bolt8BACB30MY8K8X
(c) (d)BACB30NW6K*Bolt8BACB30NW6K3X
(c) (d)BACB30NW6K*Bolt8BACB30NW6K4X
(c) (d)BACB30NW6K*Bolt7BACB30NW6K5X
(c) (d)BACB30NW6K*Bolt7BACB30NW6K7X
(c) (d)BACB30NW6K*Bolt16BACB30NW6K8X
(c) (d)BACB30NW8K*Bolt8BACB30NW8K7X
(c) (d)BACB30MY6K*Bolt6BACB30NX6K6X
(c) (d)BACB30MY6K*Bolt8BACB30NX6K7X
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
102 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 103

Upper Deck Floor Beam Station (STA) 780 on airplanes that use one of the following drawing installations:
65B37123-192
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACB30NW5K*Bolt4BACB30YP6K4
(c) (d)BACB30NW5K*Bolt2BACB30YP6K5
(c)-Collar6BACC30BL6
(c)-Collar14BACC30BH6
(c)-Collar168BACC30M6
(c)-Collar16BACC30M8
(c) (d)BACR15BA6D*Rivet2BACR15BA6D9C or
BACR15BA7D*C
(c) (d)BACR15BB5D*Rivet76BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet12BACR15BB5D7C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet62BACR15BB6D8C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet11BACR15BB6D9C or
BACR15BB7D*C
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
103 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 104

Group 5-6:
Upper Deck Floor Beam Station (STA) 800
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B25634-3 or
65B26467-1
Upper Chord165B25634-3 or
65B26467-1
(a) (b)65B25634-6 or
65B26467-9
Reinforcement Angle L/H165B25634-6 or
65B26467-9
(a) (b)65B25634-7 or
65B26467-4
Reinforcement Angle R/H165B25634-7 or
65B26467-4
(c) (d)BACB30NX6K*Bolt8BACB30NX6K4X
(c) (d)BACB30MY5K*Bolt7BACB30MY6K3
(c) (d)BACB30MY5K*Bolt77BACB30MY6K4
(c) (d)BACB30MY5K*Bolt18BACB30MY6K5
(c) (d)BACB30MY5K*Bolt2BACB30MY6K6
(c) (d)BACB30MY8K*Bolt8BACB30MY8K7X
(c) (d)BACB30MY8K*Bolt2BACB30MY8K8X
(c) (d)BACB30NW6K*Bolt8BACB30NW6K4X
(c) (d)BACB30NW6K*Bolt12BACB30NW6K5X
(c) (d)BACB30NW6K*Bolt14BACB30NW6K6X
(c) (d)BACB30MY6K*Bolt4BACB30NX6K4X
(c) (d)BACB30MY6K*Bolt18BACB30NX6K5X
(c) (d)BACB30NX8K*Bolt8BACB30NX8K10X
(c) (d)BACB30NX8K*Bolt4BACB30NX8K11X
(c)-Collar30BACC30BH6
(c)-Collar12BACC30BH8
(c)-Collar140BACC30M6
(c)-Collar10BACC30M8
(c) (d)BACR15BA3D*Rivet4BACR15BA3D6C or
BACR15BA4D*C
(c) (d)BACR15BA6D*Rivet2BACR15BA6D9C or
BACR15BA7D*C
(c) (d)BACR15BB5D*Rivet19BACR15BB5D5C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet116BACR15BB5D6C or
BACR15BB6D*C
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
104 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 105

Group 5-6:
Upper Deck Floor Beam Station (STA) 800
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACR30BB5D*Rivet10BACR15BB5D7C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet7BACR15BB6D7C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet3BACR15BB6D8C or
BACR15BB7D*C
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Group 5-6:
Upper Deck Floor Beam Station (STA) 820
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B25635-3 or
65B26467-1 or
65B26467-57
Upper Chord165B25635-3 or
65B26467-1 or
65B26467-57
(a) (b)65B25635-6 or
65B26467-3
Reinforcement Angle L/H165B25635-6 or
65B26467-3
(a) (b)65B25635-7 or
65B26467-4
Reinforcement Angle R/H165B25635-7 or
65B26467-4
(c) (d)BACB30MY5K*Bolt78BACB30MY6K4
(c) (d)BACB30MY5K*Bolt16BACB30MY6K5
(c) (d)BACB30MY8K*Bolt12BACB30MY8K7X
(c) (d)BACB30MY8K*Bolt4BACB30MY8K8X
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
105 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 106

Group 5-6:
Upper Deck Floor Beam Station (STA) 820
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACB30NW6K*Bolt8BACB30NW6K4X
(c) (d)BACB30NW6K*Bolt12BACB30NW6K5X
(c) (d)BACB30NW6K*Bolt14BACB30NW6K6X
(c) (d)BACB30NW8K*Bolt2BACB30NW8K8X
(c) (d)BACB30NX6K*Bolt6BACB30NX6K3X
(c) (d)BACB30MY6K*Bolt4BACB30NX6K4X
(c) (d)BACB30NX6K*Bolt2BACB30NX6K4X
(c) (d)BACB30MY6K*Bolt18BACB30NX6K5X
(c)-Collar30BACC30BH6
(c)-Collar128BACC30M6
(c)-Collar18BACC30M8
(c) (d)BACR15BA3D*Rivet4BACR15BA3D6C or
BACR15BA4D*C
(c) (d)BACR15BA6D*Rivet2BACR15BA6D9C or
BACR15BA7D*C
(c) (d)BACR15BB5D*Rivet26BACR15BB5D5C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet114BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet9BACR15BB5D7C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet8BACR15BB6D7C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet6BACR15BB6D8C or
BACR15BB7D*C
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
106 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 107

Group 5-6:
Upper Deck Floor Beam Station (STA) 820
NotesExisting Part NumberNameQTYPart Number /
Specification
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Group 5-6:
Upper Deck Floor Beam Station (STA) 840
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B25636-3Upper Chord165B25636-3
(a) (b)65B25636-6Reinforcement Angle L/H165B25636-6
(a) (b)65B25636-7Reinforcement Angle R/H165B25636-7
(c) (d)BACB30MY5K*Bolt78BACB30MY6K4
(c) (d)BACB30MY5K*Bolt16BACB30MY6K5
(c) (d)BACB30MY8K*Bolt12BACB30MY8K7X
(c) (d)BACB30MY8K*Bolt4BACB30MY8K8X
(c) (d)BACB30NW6K*Bolt8BACB30NW6K4X
(c) (d)BACB30NW6K*Bolt12BACB30NW6K5X
(c) (d)BACB30NW6K*Bolt14BACB30NW6K6X
(c) (d)BACB30NW8K*Bolt2BACB30NW8K8X
(c) (d)BACB30MY6K*Bolt8BACB30NX6K4X
(c) (d)BACB30MY6K*Bolt12BACB30NX6K5X
(c)-Collar20BACC30BH6
(c)-Collar128BACC30M6
(c)-Collar18BACC30M8
(c) (d)BACR15BA3D*Rivet4BACR15BA3D6C or
BACR15BA4D*C
(c) (d)BACR15BA6D*Rivet2BACR15BA6D9C or
BACR15BA7D*C
(c) (d)BACR15BB5D*Rivet146BACR15BB5D5C or
BACR15BB6D*C
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
107 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 108

Group 5-6:
Upper Deck Floor Beam Station (STA) 840
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACR15BB5D*Rivet18BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet6BACR15BB6D6C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet10BACR15BB6D7C or
BACR15BB7D*C
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Group 6:
Upper Deck Floor Beam Station (STA) 860
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B25637-3 or
65B25637-38
Upper Chord165B25637-3 or
65B25637-38
(a) (b)65B25637-10Failsafe Strap165B25637-10
(a) (b)65B25637-23Reinforcement Angle L/H165B25637-23
(a) (b)65B25637-24Reinforcement Angle R/H165B25637-24
(c) (d)BACB30MY8K*Bolt12BACB30MY8K7X
(c) (d)BACB30MY8K*Bolt4BACB30MY8K8X
(c) (d)BACB30MY6K*Bolt90BACB30NX6K4X
(c) (d)BACB30MY6K*Bolt16BACB30NX6K5X
(c) (d)BACB30MY6K*Bolt6BACB30NX6K6X
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
108 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 109

Group 6:
Upper Deck Floor Beam Station (STA) 860
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACB30MY6K*Bolt156BACB30NX6K7X
(c) (d)BACB30NX8K*Bolt14BACB30NX8K11X
(c)-Collar226BACC30BH6
(c)-Collar2BACC30BH8
(c)-Collar16BACC30M8
(c) (d)BACR15BB6D*Rivet156BACR15BB6D6C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet14BACR15BB6D7C or
BACR15BB7D*C
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Group 5:
Upper Deck Floor Beam Station (STA) 1000
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B25644-3 or
65B26469-1
Upper Chord165B25644-3 or
65B26469-1
(a) (b)65B25644-6 or
65B26469-3
Reinforcement Angle L/H165B25644-6 or
65B26469-3
(a) (b)65B25644-7 or
65B26469-4
Reinforcement Angle R/H165B25644-7 or
65B26469-4
(c) (d)BACB30MY5K*Bolt86BACB30MY6K4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
109 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 110

Group 5:
Upper Deck Floor Beam Station (STA) 1000
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACB30MY5K*Bolt17BACB30MY6K5
(c) (d)BACB30MY5K*Bolt2BACB30MY6K6
(c) (d)BACB30MY8K*Bolt6BACB30MY8K7X
(c) (d)BACB30MY8K*Bolt6BACB30MY8K9X
(c) (d)BACB30MY8K*Bolt4BACB30MY8K10X
(c) (d)BACB30NW6K*Bolt12BACB30NW6K4X
(c) (d)BACB30NW6K*Bolt12BACB30NW6K5X
(c) (d)BACB30NW6K*Bolt20BACB30NW6K6X
(c) (d)BACB30NW6K*Bolt1BACB30NW6K7X
(c) (d)BACB30NX6K*Bolt7BACB30NX6K3X
(c) (d)BACB30MY6K*Bolt5BACB30NX6K4X
(c) (d)BACB30NX6K*Bolt9BACB30NX6K4X
(c) (d)BACB30MY6K*Bolt14BACB30NX6K5X
(c)-Collar35BACC30BH6
(c)-Collar150BACC30M6
(c)-Collar16BACC30M8
(c) (d)BACR15BA3D*Rivet4BACR15BA3D4C or
BACR15BA4D*C
(c) (d)BACR15BA3D*Rivet4BACR15BA3D6C or
BACR15BA4D*C
(c) (d)BACR15BA4D*Rivet2BACR15BA4D4C or
BACR15BA5D*C
(c) (d)BACR15BA6D*Rivet2BACR15BA6D9C or
BACR15BA7D*C
(c) (d)BACR15BB5D*Rivet29BACR15BB5D5C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet113BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet10BACR15BB5D7C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet2BACR15BB5D8C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet6BACR15BB6D7C or
BACR15BB7D*C
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
110 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 111

Group 5:
Upper Deck Floor Beam Station (STA) 1000
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACR15BB6D*Rivet2BACR15BB6D8C or
BACR15BB7D*C
(c) (d)BACR15CE5D*Rivet1BACR15GF5D5 or
BACR15GF6D*
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Group 5:
Upper Deck Floor Beam Station (STA) 1020
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B25645-3 or
65B26469-9 or
65B26469-30 or
65B26469-33
Upper Chord165B25645-3 or
65B26469-9 or
65B26469-30 or
65B26469-33
(a) (b)65B25645-4 or
65B26469-5
Reinforcement Angle L/H165B25645-4 or
65B26469-5
(a) (b)65B25645-5 or
65B26469-6 or
65B26469-31
Reinforcement Angle R/H165B25645-5 or
65B26469-6 or
65B26469-31
(c) (d)BACB30MY5K*Bolt82BACB30MY6K4
(c) (d)BACB30MY5K*Bolt15BACB30MY6K5
(c) (d)BACB30MY8K*Bolt14BACB30MY8K7X
(c) (d)BACB30MY8K*Bolt4BACB30MY8K8X
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
111 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 112

Group 5:
Upper Deck Floor Beam Station (STA) 1020
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACB30NW6K*Bolt10BACB30NW6K4X
(c) (d)BACB30NW6K*Bolt12BACB30NW6K5X
(c) (d)BACB30NW6K*Bolt14BACB30NW6K6X
(c) (d)BACB30MY6K*Bolt1BACB30NX6K3X
(c) (d)BACB30NX6K*Bolt5BACB30NX6K3X
(c) (d)BACB30MY6K*Bolt6BACB30NX6K4X
(c) (d)BACB30NX6K*Bolt6BACB30NX6K4X
(c) (d)BACB30MY6K*Bolt12BACB30NX6K5X
(c)-Collar30BACC30BH6
(c)-Collar132BACC30M6
(c)-Collar18BACC30M8
(c) (d)BACR15BA3D*Rivet4BACR15BA3D4C or
BACR15BA4D*C
(c) (d)BACR15BA3D*Rivet4BACR15BA3D6C or
BACR15BA4D*C
(c) (d)BACR15BB5D*Rivet137BACR15BB5D5C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet16BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet1BACR15BB5D8C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet2BACR15BB6DC or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet10BACR15BB6D6C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet1BACR15BB6D8C or
BACR15BB7D*C
(c) (d)BACR15CE3D*Rivet4BACR15GF3D5 or
BACR15GF4D*
(c) (d)BACR15CE4D*Rivet2BACR15GF4D5 or
BACR15GF5D*
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
112 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 113

Group 5:
Upper Deck Floor Beam Station (STA) 1020
NotesExisting Part NumberNameQTYPart Number /
Specification
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Group 5:
Upper Deck Floor Beam Station (STA) 1040
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B25646-3 or
65B26469-24
Upper Chord165B25646-3 or
65B26469-24
(a) (b)65B25646-4 or
65B26469-25
Reinforcement Angle L/H165B25646-4 or
65B26469-25
(a) (b)65B25646-5 or
65B26469-26
Reinforcement Angle R/H165B25646-5 or
65B26469-26
(c) (d)BACB30MY5K*Bolt80BACB30MY6K4
(c) (d)BACB30MY5K*Bolt15BACB30MY6K5
(c) (d)BACB30MY8K*Bolt14BACB30MY8K7X
(c) (d)BACB30MY8K*Bolt4BACB30MY8K8X
(c) (d)BACB30NW6K*Bolt8BACB30NW6K4X
(c) (d)BACB30NW6K*Bolt12BACB30NW6K5X
(c) (d)BACB30NW6K*Bolt16BACB30NW6K6X
(c) (d)BACB30NX6K*Bolt7BACB30NX6K3X
(c) (d)BACB30MY6K*Bolt4BACB30NX6K4X
(c) (d)BACB30NX6K*Bolt4BACB30NX6K4X
(c) (d)BACB30MY6K*Bolt12BACB30NX6K5X
(c)-Collar27BACC30BH6
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
113 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 114

Group 5:
Upper Deck Floor Beam Station (STA) 1040
NotesExisting Part NumberNameQTYPart Number /
Specification
(c)-Collar131BACC30M6
(c)-Collar18BACC30M8
(c) (d)BACR15BA3D*Rivet4BACR15BA3D6C or
BACR15BA4D*C
(c) (d)BACR15BB5D*Rivet27BACR15BB5D5C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet117BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet12BACR15BB5D7C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet7BACR15BB6D7C or
BACR15BB7D*C
(c) (d)BACR15CE5D*Rivet2BACR15GF5D7 or
BACR15GF6D*
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Group 5:
Upper Deck Floor Beam Station (STA) 1060
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B25647-2 or
65B26469-11
Upper Chord165B25647-2 or
65B26469-11
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
114 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 115

Group 5:
Upper Deck Floor Beam Station (STA) 1060
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B25647-7 or
65B26469-7
Reinforcement Angle L/H165B25647-7 or
65B26469-7
(a) (b)65B25647-8 or
65B26469-8
Reinforcement Angle R/H165B25647-8 or
65B26469-8
(c) (d)BACB30MY5K*Bolt95BACB30MY6K4
(c) (d)BACB30MY5K*Bolt16BACB30MY6K5
(c) (d)BACB30MY8K*Bolt2BACB30MY8K6X
(c) (d)BACB30MY8K*Bolt12BACB30MY8K7X
(c) (d)BACB30MY8K*Bolt4BACB30MY8K8X
(c) (d)BACB30NW6K*Bolt4BACB30NW6K3X
(c) (d)BACB30NW6K*Bolt6BACB30NW6K4X
(c) (d)BACB30NW6K*Bolt16BACB30NW6K5X
(c) (d)BACB30MY6K*Bolt3BACB30NX6K4X
(c) (d)BACB30MY6K*Bolt18BACB30NX6K5X
(c)-Collar21BACC30BH6
(c)-Collar137BACC30M6
(c)-Collar18BACC30M8
(c) (d)BACR15BB5D*Rivet93BACR15BB5D5C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet61BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet7BACR15BB5D7C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet5BACR15BB6D7C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet4BACR15BB6D8C or
BACR15BB7D*C
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
115 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 116

Group 5:
Upper Deck Floor Beam Station (STA) 1060
NotesExisting Part NumberNameQTYPart Number /
Specification
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Group 5:
Upper Deck Floor Beam Station (STA) 1080
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B25648-2 or
65B26469-13
Upper Chord165B25648-2 or
65B26469-13
(a) (b)65B25648-7 or
65B26469-15
Reinforcement Angle L/H165B25648-7 or
65B26469-15
(a) (b)65B25648-8 or
65B26469-16
Reinforcement Angle R/H165B25648-8 or
65B26469-16
(c) (d)BACB30MY5K*Bolt74BACB30MY6K4
(c) (d)BACB30MY5K*Bolt6BACB30MY6K5
(c) (d)BACB30MY5K*Bolt2BACB30MY6K6
(c) (d)BACB30MY8K*Bolt2BACB30MY8K6X
(c) (d)BACB30MY8K*Bolt12BACB30MY8K7X
(c) (d)BACB30MY8K*Bolt4BACB30MY8K8X
(c) (d)BACB30NW6K*Bolt6BACB30NW6K3X
(c) (d)BACB30NW6K*Bolt12BACB30NW6K4X
(c) (d)BACB30NW6K*Bolt20BACB30NW6K5X
(c) (d)BACB30MY6K*Bolt3BACB30NX6K4X
(c) (d)BACB30MY6K*Bolt18BACB30NX6K5X
(c) (d)BACB30MY6K*Bolt3BACB30NX6K6X
(c)-Collar14BACC30BH6
(c)-Collar120BACC30M6
(c)-Collar18BACC30M8
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
116 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 117

Group 5:
Upper Deck Floor Beam Station (STA) 1080
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACR15BB5D*Rivet93BACR15BB5D5C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet58BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet5BACR15BB5D7C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet9BACR15BB6D7C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet4BACR15BB6D8C or
BACR15BB7D*C
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Group 5:
Upper Deck Floor Beam Station (STA) 1100
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)65B25649-2Upper Chord165B25649-2
(a) (b)65B25649-7Reinforcement Angle L/H165B25649-7
(a) (b)65B25649-8Reinforcement Angle R/H165B25649-8
(c) (d)BACB30MY5K*Bolt61BACB30MY6K4
(c) (d)BACB30MY6K*Bolt2BACB30MY6K4X
(c) (d)BACB30MY5K*Bolt3BACB30MY6K5
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
117 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 118

Group 5:
Upper Deck Floor Beam Station (STA) 1100
NotesExisting Part NumberNameQTYPart Number /
Specification
(c) (d)BACB30MY6K*Bolt14BACB30MY6K5X
(c) (d)BACB30MY8K*Bolt18BACB30MY8K7X
(c) (d)BACB30NW6K*Bolt8BACB30NW6K4X
(c) (d)BACB30NW6K*Bolt12BACB30NW6K5X
(c) (d)BACB30NW6K*Bolt16BACB30NW6K6X
(c) (d)BACB30NX6K*Bolt6BACB30NX6K3X
(c) (d)BACB30NX6K*Bolt2BACB30NX6K4X
(c) (d)BACB30NX6K*Bolt6BACB30NX6K5X
(c) (d)BACB30NX6K*Bolt11BACB30NX6K6X
(c) (d)BACB30NX6K*Bolt6BACB30NX6K7X
(c) (d)BACB30NX6K*Bolt4BACB30NX6K8X
(c) (d)BACB30NX6K*Bolt1BACB30NX6K9X
(c) (d)BACB30NX6K*Bolt1BACB30NX6K10X
(c) (d)BACB30NX6K*Bolt1BACB30NX6K11X
(c)-Collar54BACC30BH6
(c)-Collar100BACC30M6
(c)-Collar18BACC30M8
(c) (d)BACR15BB5D*Rivet14BACR15BB5D5C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet108BACR15BB5D6C or
BACR15BB6D*C
(c) (d)BACR15BB5D*Rivet15BACR15BB5D7C or
BACR15BB6D*C
(c) (d)BACR15BB6D*Rivet4BACR15BB6D7C or
BACR15BB7D*C
(c) (d)BACR15BB6D*Rivet3BACR15BB6D8C or
BACR15BB7D*C
(e)-Chemical Conversion Coating4 OuncesType 2, Class A
(f)-Primer1/4 PintBMS 10-11, Type I
(f)-Sealant4 OuncesBMS 5-95, Class B
(f)-Corrosion Inhibiting Compound8 OuncesBMS 3-23, Type II,
Class 2
(a) Fabricate a new part. Refer to APPENDIX A.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
118 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 119

Group 5:
Upper Deck Floor Beam Station (STA) 1100
NotesExisting Part NumberNameQTYPart Number /
Specification
(b) Discard the existing part.
(c) Refer to 747 Structural Repair Manual Chapter 51 for alternative fasteners.
(d) Use oversize bolts. Use oversize rivets when the rivet hole in the web or frame must be oversized to
correct damage or misalignment. At locations where a larger than original rivet will be installed, verify
grip length on installation.
(e) Refer to SOPM 20-43-03 for supplier data.
(f) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
3. Parts Modified and Reidentified:
None.
4. Parts Removed and Not Replaced:
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
119 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 120

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
120 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT
BLANK PAGE

### Page 121

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque limits to tighten nuts and bolts are in SRM Chapter 51
4. Use the approved fastener and process material substitutions in accordance with
SRM Chapter 51.
5. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51.
6. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
7. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
8. Refer to Appendix A to identify the parts to be replaced and the material used to
make replacement parts. The appendix lists the drawing numbers for fabrication,
installation, and fastener requirements.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
121 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 122

9. Fasteners may be oversized 1/64 or 1/32 inch as needed. Maintain 1.7D edge margin
on the upper chord and all adjacent parts. At fasteners common to the floor beam
to frame connection, 1.5D minimum edge margin is acceptable in Section 41 with a
reduced after-modification inspection threshold as given in Paragraph 1.E.,
Compliance. Edge margin is defined as the distance from the edge of the part to the
center of the hole, and "D" is the hole diameter.
10. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
11. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
12. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
13. Boeing Service Letter 747-SL-51-048, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
14. Shaded areas in Figures are reference only. Shaded areas in Figures may look
different than your airplane.
15. Install all bolts in transition fit holes. Transition fit hole sizes are given in 747 SRM,
Chapter 51.
16. Boeing recommends installation of oversize fasteners at all bolt locations. At rivet
locations, install the original size rivet provided the hole meets the acceptable surface
defect criteria for fastener holes given in SRM, Chapter 51.
17. Refer to Appendix B for a Fastener Replacement Guide.
18. Upper chord replacement is only required at "full length" upper deck floor beams aft
of station (STA) 360 that span the entire width of the airplane from the left side of
body frame to the right side of body frame.
B. WORK INSTRUCTIONS
PART 1 - Access
1. For access to the upper deck floor beams from above, remove the equipment that follows, as
necessary:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
122 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 123

Group 1, 3, 5:
Refer to AMM Subject as an accepted procedureEquipment
747-100/200/300 AMM 25-16-01Flight Compartment Floor Covering
747-100/200/300 AMM 25-24-16Upper Deck Closets
747-100/200/300 AMM 25-24-18
747-100/200/300 AMM 25-24-25
747-100/200/300 AMM 25-24-47
747-100/200/300 AMM 25-25-01Upper Deck Passenger Seat
747-100/200/300 AMM 25-27-05Upper Deck Floor Covering
747-100/200/300 AMM 25-31-05Upper Deck Galleys
747-100/200/300 AMM 25-31-06
747-100/200/300 AMM 25-40-03Upper Deck Lavatories
747-100/200/300 AMM 53-21-02Upper Deck Floor Panels
-Crew Rest Area
Group 2, 4, 6:
Refer to AMM Subject as an accepted procedureEquipment
747-100/200/300 AMM 25-16-01Flight Compartment Floor Covering
747-100/200/300 AMM 25-25-01Upper Deck Passenger Seat
747-100/200/300 AMM 25-27-05Upper Deck Floor Covering
747-100/200/300 AMM 25-24-02Closets
747-100/200/300 AMM 25-24-16
747-100/200/300 AMM 25-24-18
747-100/200/300 AMM 25-24-25
747-100/200/300 AMM 25-24-33
747-100/200/300 AMM 25-24-47
747-100/200/300 AMM 25-33-12Crew Galley - Upper Deck
747-100/200/300 AMM 25-40-03Lavatory
747-100/200/300 AMM 53-21-02Upper Deck Floor Panels
-Crew Rest Area
2. For access to the upper deck floor beams from below, remove the equipment that follows, as
necessary:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
123 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 124

Group 1, 3, 5:
Refer to AMM Subject as an accepted procedureEquipment
747-100/200/300 AMM 25-21-04Ceiling Insulation
747-100/200/300 AMM 25-22-01Ceiling Access Panels
747-100/200/300 AMM 25-23-01Passenger Service Units
747-100/200/300 AMM 25-25-01Passenger Seats
747-100/200/300 AMM 25-28-07Center Overhead Stowage Compartments
747-100/200/300 AMM 25-28-10Side Overhead Stowage Compartments
Group 2, 4, 6:
Refer to AMM Subject as an accepted procedureEquipment
747-100/200/300 AMM 25-59-01Main Deck Cargo Compartment Ceiling Lining
747-100/200/300 AMM 25-59-05Main Deck Ceiling Insulation
PART 2 - Upper Deck Floor Beam Upper Chord Removal and Structure Inspection
CAUTION: DO NOT REMOVE ADJACENT FLOOR BEAM UPPER CHORDS AT THE SAME TIME.
IF ADJACENT FLOOR BEAM UPPER CHORDS ARE REMOVED AT THE SAME TIME,
DAMAGE TO THE AIRPLANE STRUCTURE MAY OCCUR.
1. Remove the existing upper chords and reinforcing straps or angles from the upper deck floor
beams at the locations where replacement is required as shown in the applicable figure as follows:
FIGURE 1Group 1-2
FIGURE 2Group 3-4
FIGURE 3Group 5
FIGURE 4Group 6
2. Do the following inspections:
a. Do an open hole High Frequency Eddy Current (HFEC) inspection for cracks at all locations
in the floor beam webs and side of body frames where fasteners were removed to remove
the upper chords and reinforcing straps. Do this inspection for cracks in accordance with 747
NDT Part 6, 51-00-00, Figure 16.
b. Do a detailed inspection for cracks in any parts that were removed and will be re-installed.
c. If any crack is found, replace the cracked part or contact Boeing for repair instructions and
do the repair. Refer to Part 3 - Upper Deck Floor Beam Upper Chord Fabrication and Installation
for the replacement of cracked parts.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
124 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 125

PART 3 - Upper Deck Floor Beam Upper Chord Fabrication and Installation
1. For each floor beam location where replacement is required as shown in the applicable FIGURE
1 or FIGURE 2 or FIGURE 3 or FIGURE 4, make a new upper chord and associated straps or
angles.
a. Fabricate a new upper chord and straps or angles. Refer to APPENDIX A for the applicable
parts and fabrication requirements. Use the existing parts as a guide and to match the profile
of the existing chord to frame attachment.
b. Apply one coat of Type 2, Class A chemical conversion coating to bare aluminum surfaces.
Refer to SOPM 20-43-03.
c. Apply two coats of BMS 10-11, Type 1 primer to the new parts. Refer to SOPM 20-41-02.
2. For each floor beam location where replacement is required as shown in the applicable FIGURE
1 or FIGURE 2 or FIGURE 3 or FIGURE 4, install a new upper chord, new associated reinforcing
straps or angles, and any kept or replaced parts in accordance with the applicable production
drawings (Refer to APPENDIX A). In Section 41, also refer to Service Bulletin 747-53-2272 as
necessary.
NOTE: Fastener holes may be oversized up to 1/32 inch to correct damage or misalignment. If
more than 1/32 inch oversize is necessary, contact Boeing. At rivet locations where the
hole was already oversized during accomplishment of Service Bulletin 747-53-2272, do
not further oversize the hole, and install the same diameter rivet as was called out for SB
747-53-2272. At bolt locations where the hole was already oversized during
accomplishment of Service Bulletin 747-53-2272, make the hole an additional 1/64 inch
oversize and install oversize fastener. If further oversizing is necessary to meet hole
quality requirements, contact Boeing for instructions.
NOTE: Make sure a minimum edge margin of 1.7D is maintained in both floor beam and body
frame. At fasteners common to the floor beam to frame connection, 1.5D minimum edge
margin is acceptable in Section 41 with a reduced after-modification inspection threshold
as given in Paragraph 1.E., Compliance.
NOTE: Install bolts common to the upper chord wet using BMS 5-95 sealant. Refer to SOPM
20-50-19.
3. After upper chord replacement is complete, reapply BMS 3-23, Type II, Class 2 Corrosion Inhibiting
Compound (CIC) to the new upper chord structure and fasteners.
PART 4 - After Replacement Inspections
1. At the time given in Paragraph 1.E., Compliance, of this service bulletin, do inspections as follows:
a. Do open hole HFEC inspection at the floor panel attachment holes and surface HFEC
inspection at the permanent fastener locations for cracks in the replaced upper deck floor
beam chords, in accordance with Service Bulletin 747-53A2452.
b. Do HFEC inspections of the upper deck floor beam upper chords at strap/frame connections
in accordance with Structural Significant Items (SSI) F-19D, F-19H, F-20B, and F-20G of
Supplemental Structural Inspection Document (SSID) D6-35022, Revision G, dated December
2000. Inspections are only required at locations identified in the SSID.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
125 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 126

2. If any crack is found, contact Boeing for repair instructions and do the repair.
3. If no crack is found, do repeat inspections as follows:
a. Repeat open hole HFEC inspection at floor panel attachment holes and surface HFEC
inspection at permanent fastener locations in accordance with Service Bulletin 747-53A2452,
at the interval given in Paragraph 1.E., Compliance.
b. Repeat HFEC inspections of the upper deck floor beam upper chords at strap/frame
connections in accordance with Structural Significant Items (SSI) F-19D, F-19H, F-20B, and
F-20G of Supplemental Structural Inspection Document (SSID) D6-35022, Revision G, dated
December 2000, at the interval given in Paragraph 1.E., Compliance. Inspections are only
required at locations identified in the SSID.
4. Do the chord removal, open hole HFEC inspections, detailed inspections, chord fabrication, and
new chord installation actions again, in accordance with PART 2 and PART 3, at the time given
in Paragraph 1.E., Compliance.
PART 5 - Restoration
1. For restoration above the upper deck floor beams, install removed equipment. Refer to the following
procedures, as necessary:
Group 1, 3, 5:
Refer to AMM Subject as an accepted procedureEquipment
747-100/200/300 AMM 25-16-01Flight Compartment Floor Covering
747-100/200/300 AMM 25-24-16Upper Deck Closets
747-100/200/300 AMM 25-24-18
747-100/200/300 AMM 25-24-25
747-100/200/300 AMM 25-24-47
747-100/200/300 AMM 25-25-01Upper Deck Passenger Seat
747-100/200/300 AMM 25-27-05Upper Deck Floor Covering
747-100/200/300 AMM 25-31-05Upper Deck Galleys
747-100/200/300 AMM 25-31-06
747-100/200/300 AMM 25-40-03Upper Deck Lavatories
747-100/200/300 AMM 53-21-02Upper Deck Floor Panels
-Crew Rest Area
Group 2, 4, 6:
Refer to AMM Subject as an accepted procedureEquipment
747-100/200/300 AMM 25-16-01Flight Compartment Floor Covering
747-100/200/300 AMM 25-25-01Upper Deck Passenger Seat
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
126 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 127

Group 2, 4, 6:
Refer to AMM Subject as an accepted procedureEquipment
747-100/200/300 AMM 25-27-05Upper Deck Floor Covering
747-100/200/300 AMM 25-24-02Closets
747-100/200/300 AMM 25-24-16
747-100/200/300 AMM 25-24-18
747-100/200/300 AMM 25-24-25
747-100/200/300 AMM 25-24-33
747-100/200/300 AMM 25-24-47
747-100/200/300 AMM 25-33-12Crew Galley - Upper Deck
747-100/200/300 AMM 25-40-03Lavatory
747-100/200/300 AMM 53-21-02Upper Deck Floor Panels
-Crew Rest Area
2. For restoration below the upper deck floor beams, install removed equipment. Refer to the following
procedures, as necessary:
Group 1, 3, 5:
Refer to AMM Subject as an accepted procedureEquipment
747-100/200/300 AMM 25-21-04Ceiling Insulation
747-100/200/300 AMM 25-22-01Ceiling Access Panels
747-100/200/300 AMM 25-23-01Passenger Service Units
747-100/200/300 AMM 25-25-01Passenger Seats
747-100/200/300 AMM 25-28-07Center Overhead Stowage Compartments
747-100/200/300 AMM 25-28-10Side Overhead Stowage Compartments
Group 2, 4, 6:
Refer to AMM Subject as an accepted procedureEquipment
747-100/200/300 AMM 25-59-01Main Deck Cargo Compartment Ceiling Lining
747-100/200/300 AMM 25-59-05Main Deck Ceiling Insulation
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
127 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 128

This Figure applies only to: Group 1-2.
FIGURE 1: UPPER DECK FLOOR BEAM - UPPER CHORD - REPLACEMENT LOCATIONS
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
128 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 129 (OCR)

BOEING SERVICE BULLETIN 747-53A2852
ALERT  ALERT
STA  STA  STA  STA  STA
STA  460  480  500  520  540  560
STA  STA
STA  400
330  STA  380
STA  360
340
UPPER CHORD
REPLACEMENT LOCATION
FWD  2155407
FIGURE 1: UPPER DECK FLOOR BEAM - UPPER CHORD - REPLACEMENT LOCATIONS
(SHEET 2 OF 3)
Original Issue: June 22, 2012
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2852
Work - See page 1 for details.  129 of 189

### Page 130 (OCR)

BOEING SERVICE BULLETIN 747-53A2852
ALERT  ALERT
STA  STA  STA  STA  STA  STA  STA  STA  STA  SIA
580  600  620  640  660  680  700  720  740
FWD
NOT INSTALLED ON ALL
AIRPLANES
UPPER CHORD  2155421
REPLACEMENT LOCATION
FIGURE 1: UPPER DECK FLOOR BEAM - UPPER CHORD - REPLACEMENT LOCATIONS
(SHEET 3 OF 3)
Original Issue: June 22, 2012
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-53A2852
Work - See page 1 for details.  130 of 189

### Page 131

This Figure applies only to: Group 3-4.
FIGURE 2: UPPER DECK FLOOR BEAM - UPPER CHORD - REPLACEMENT LOCATIONS
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
131 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 132 (OCR)

BOEING SERVICE BULLETIN 747-53A2852
ALERT  ALERT
STA  STA  STA  STA  STA
STA  440  STA  460  STA  480  500  520  540  560
STA  420
STA  400
STA  380
STA  360
340
UPPER CHORD
REPLACEMENT LOCATION  FWD
2155435
FIGURE 2: UPPER DECK FLOOR BEAM - UPPER CHORD - REPLACEMENT LOCATIONS
(SHEET 2 OF 3)
Original Issue: June 22, 2012  Export Controlled ECCN: 9E991 - BOEING  747-53A2852
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  132 of 189

### Page 133 (OCR)

BOEING SERVICE BULLETIN 747-53A2852
ALERT  ALERT
STA  STA  STA  STA  STA  STA  STA  STA  STA  STA
580  600  620  640  660  680  700  720  760  780
FWD
NOT INSTALLED ON ALL
AIRPLANES
UPPER CHORD  2155443
REPLACEMENT LOCATION
FIGURE 2: UPPER DECK FLOOR BEAM - UPPER CHORD - REPLACEMENT LOCATIONS
(SHEET 3 OF 3)
Original Issue: June 22, 2012
PROPRIETARY - Copyright ® Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2852
Work - See page 1 for details.  133 of 189

### Page 134

This Figure applies only to: Group 5.
FIGURE 3: UPPER DECK FLOOR BEAM - UPPER CHORD - REPLACEMENT LOCATIONS
(SHEET 1 OF 4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
134 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 135 (OCR)

BOEING SERVICE BULLETIN 747-53A2852
ALERT  ALERT
STA  STA  STA  STA  STA  STA
500  520  540  560  580  600
STA
STA  420
STA  380  STA  400
STA  360
340
UPPER CHORD  FWD
REPLACEMENT LOCATION
2155933
FIGURE 3: UPPER DECK FLOOR BEAM - UPPER CHORD - REPLACEMENT LOCATIONS
(SHEET 2 OF 4)
Original Issue: June 22, 2012
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2852
Work - See page 1 for details.  135 of 189

### Page 136 (OCR)

BOEING SERVICE BULLETIN 747-53A2852
ALERT  ALERT
STA  STA  STA  STA  STA  STA  STA  STA  STA  STA  STA  STA
620  640  660  680  700  720  740  760  780  800  820  840
UPPER CHORD
FWD
REPLACEMENT LOCATION
2155940
FIGURE 3: UPPER DECK FLOOR BEAM - UPPER CHORD - REPLACEMENT LOCATIONS
(SHEET 3 OF 4)
Original Issue: June 22, 2012
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-53A2852
Work - See page 1 for details.  136 of 189

### Page 137 (OCR)

BOEING SERVICE BULLETIN 747-53A2852
ALERT  ALERT
STA  STA  STA  STA  STA  STA  STA  STA  STA  STA  STA  STA  STA
860  880  900  920  940  960  980  1000  1020  1040  1060  1080  1100
UPPER CHORD
REPLACEMENT LOCATION
2155946
FIGURE 3: UPPER DECK FLOOR BEAM - UPPER CHORD - REPLACEMENT LOCATIONS
(SHEET 4 OF 4)
Original Issue: June 22, 2012
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2852
Work - See page 1 for details.  137 of 189

### Page 138

This Figure applies only to: Group 6.
FIGURE 4: UPPER DECK FLOOR BEAM - UPPER CHORD - REPLACEMENT LOCATIONS
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
138 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 139 (OCR)

BOEING SERVICE BULLETIN 747-53A2852
ALERT  ALERT
STA  STA  STA  STA  STA  STA  STA
STA  STA  380  STA  400  420  STA  STA  440  480  500  520  540  560  580  600
STA  360
340
UPPER CHORD
REPLACEMENT LOCATION
2155885
FIGURE 4: UPPER DECK FLOOR BEAM - UPPER CHORD - REPLACEMENT LOCATIONS
(SHEET 2 OF 3)
Original Issue: June 22, 2012
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2852
Work - See page 1 for details.  139 of 189

### Page 140 (OCR)

BOEING SERVICE BULLETIN 747-53A2852
ALERT  ALERT
STA  STA  STA  STA  STA  STA  STA  STA  STA  STA STA  STA
620  640  660  680  700  720  760  780  800  820  840  860
UPPER CHORD
REPLACEMENT LOCATION  FWD
B  2155956
FIGURE 4: UPPER DECK FLOOR BEAM - UPPER CHORD - REPLACEMENT LOCATIONS
(SHEET 3 OF 3)
Original Issue: June 22, 2012
Export Controlled ECCN: 9E991 - BOEING  747-53A2852
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  140 of 189

### Page 141

The tables below identify the parts to be replaced and the material used to make replacement parts. Reference
the drawing sheets listed for fabrication, installation and fastener information. Use the material specified in the
tables below to make the replacement parts provided a minimum edge margin of 1.7D can be maintained. At
fasteners common to the floor beam to frame connection, 1.5D minimum edge margin is acceptable in Section
41 with a reduced after-modification inspection threshold as given in Paragraph 1.E., Compliance. If minimum
edge margins cannot be maintained, contact Boeing for instructions.
TABLE 1: STATION 380 FLOOR BEAM INSTALLATION - PRODUCTION DRAWING 65B10929
Right Filler
(Strap)
Left Filler
(Strap)
Upper
Chord
Part UsageInstallationSheetAirplane Effectivity (Basic
Numbers)
-26-24-18Production-100, -104, -
113, -141, -
16, -5001, -
5002, -59, -
75
3, 4, 5,
7, 8, 9,
PL, PS-
DL
R0001-R0134 R0301-R0307
R0351-R0381 R0501-R0534
R1001-R1046 R1048-R1267
R1501-R1519 R1531-R1629
R1901-R1904 R3001-R3035
R3301-R3310
(c)(b)(a)
(a) Make equivalent replacement part from AND10136-2007 X 172.2 inches 2024-T3511.
(b) Make equivalent replacement part from 2024-T3 CLAD per QQ-A-250/5. Stock size: 0.063 X 1.7 X 19.2
inches.
(c) Make equivalent replacement part from 2024-T3 CLAD per QQ-A-250/5. Stock size: 0.063 X 1.7 X 20.2
inches.
TABLE 2: STATION 400 FLOOR BEAM INSTALLATION - PRODUCTION DRAWING 65B10930
Right Filler
(Strap)
Left Filler
(Strap) or
Angle
Upper
Chord
Part UsageInstallationSheetAirplane Effectivity (Basic
Numbers)
-13-11-115Production-104, -134, -
201
8, 9, PL,
PSDL
R0380-R0381 R1142-R1142
R1183-R1183 R1185-R1186
R1188-R1188 R1191-R1199
R1204-R1216 R1218-R1226
R1228-R1228 R1230-R1230
R1232-R1232 R1234-R1234
R1238-R1242 R1245-R1246
R1252-R1252 R1255-R1266
R1592-R1592 R1594-R1595
R1597-R1597 R1601-R1601
R1603-R1604 R1606-R1608
R1610-R1611 R1613-R1613
R1616-R1616 R1620-R1620
R1624-R1629
(c)(b)(a)
Appendix A: UPPER DECK FLOOR BEAM - UPPER CHORD DATA
(SHEET 1 OF 46)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
141 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 142

TABLE 2: STATION 400 FLOOR BEAM INSTALLATION - PRODUCTION DRAWING 65B10930
Right Filler
(Strap)
Left Filler
(Strap) or
Angle
Upper
Chord
Part UsageInstallationSheetAirplane Effectivity (Basic
Numbers)
-13-11-25Production104, -5001,
-5002, -71, -
76
3, 5, 6,
8, 9, PL,
PSDL
R0001-R0133 R0301-R0307
R0366-R0366 R0368-R0371
R0374-R0376 R0501-R0534
R1001-R1046 R1048-R1059
R1062-R1066 R1068-R1068
R1072-R1073 R1078-R1078
R1081-R1087 R1089-R1090
R1092-R1098 R1100-R1101
R1103-R1103 R1105-R1112
R1114-R1120 R1125-R1126
R1128-R1128 R1130-R1132
R1134-R1134 R1137-R1137
R1140-R1141 R1143-R1146
R1152-R1152 R1154-R1154
R1156-R1162 R1164-R1165
R1167-R1167 R1173-R1177
R1180-R1180 R1182-R1182
R1187-R1187 R1189-R1189
R1200-R1201 R1203-R1203
R1227-R1227 R1229-R1229
R1231-R1231 R1233-R1233
R1237-R1237 R1243-R1243
R1247-R1248 R1250-R1251
R1254-R1254 R1501-R1512
R1532-R1534 R1539-R1540
R1548-R1548 R1550-R1550
R1552-R1552 R1554-R1554
R1562-R1562 R1565-R1565
R1570-R1571 R1573-R1573
R1576-R1577 R1590-R1590
R1596-R1596 R1602-R1602
R1617-R1617 R1901-R1904
R3001-R3004 R3007-R3017
R3019-R3021 R3023-R3023
R3025-R3025 R3028-R3035
R3301-R3305 R3307-R3307
R3309-R3310
(c)(b)(a)
-154-11-25Production-1643, 10,
PL, PS-
DL
R1623
(d)(b)(a)
-154-199-55Production-1963, 5, 10,
PL, PS-
DL
R1621-R1622
(d)(d)(a)
Appendix A: UPPER DECK FLOOR BEAM - UPPER CHORD DATA
(SHEET 2 OF 46)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
142 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 143

TABLE 2: STATION 400 FLOOR BEAM INSTALLATION - PRODUCTION DRAWING 65B10930
Right Filler
(Strap)
Left Filler
(Strap) or
Angle
Upper
Chord
Part UsageInstallationSheetAirplane Effectivity (Basic
Numbers)
-13-56-55Production-513, 4, 5,
PL, PS-
DL
R0134-R0134 R0354-R0354
R1060-R1061 R1067-R1067
R1069-R1071 R1074-R1077
R1079-R1080 R1088-R1088
R1091-R1091 R1099-R1099
R1102-R1102 R1113-R1113
R1121-R1124 R1127-R1127
R1129-R1129 R1133-R1133
R1135-R1136 R1138-R1139
R1149-R1150 R1153-R1153
R1155-R1155 R1163-R1163
R1166-R1166 R1168-R1172
R1178-R1179 R1181-R1181
R1184-R1184 R1190-R1190
R1202-R1202 R1217-R1217
R1249-R1249 R1513-R1519
R1531-R1531 R1537-R1538
R1541-R1547 R1549-R1549
R1551-R1551 R1555-R1555
R1557-R1561 R1563-R1563
R1568-R1568 R1572-R1572
R1574-R1575 R1578-R1584
R1588-R1589 R1591-R1591
R1593-R1593 R1598-R1600
R1605-R1605 R1609-R1609
R1612-R1612 R1614-R1615
R1618-R1619 R3005-R3006
R3018-R3018 R3022-R3022
R3306-R3306 R3308-R3308
(c)(c)(a)
-154-56-96Production-2083, 5, 6,
PL, PS-
DL
R1267
(d)(c)(a)
-13-56-96Production-983, 5, 6,
PL, PS-
DL
R0351-R0353 R0355-R0365
R0367-R0367 R0372-R0373
R0377-R0379 R1147-R1147
R1151-R1151 R1235-R1236
R1244-R1244 R1253-R1253
R1566-R1566 R1569-R1569
R3024-R3024 R3026-R3027
(c)(c)(a)
(a) Make equivalent replacement part from AND10136-2006 X 180.5 inches 2024-T3511.
(b) Make equivalent replacement part from BAC1512-3341 X 18.0 inches 2024-T3511.
Appendix A: UPPER DECK FLOOR BEAM - UPPER CHORD DATA
(SHEET 3 OF 46)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
143 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

### Page 144

TABLE 2: STATION 400 FLOOR BEAM INSTALLATION - PRODUCTION DRAWING 65B10930
Right Filler
(Strap)
Left Filler
(Strap) or
Angle
Upper
Chord
Part UsageInstallationSheetAirplane Effectivity (Basic
Numbers)
(c) Make equivalent replacement part from BAC1490-2570 X 18.0 inches 2024-T3.
(d) Make equivalent replacement part from BAC1490-2570 X 22.5 inches 2024-T3.
TABLE 3: STATION 420 FLOOR BEAM INSTALLATION - PRODUCTION DRAWING 65B10931
Right Filler
(Strap)
Left Filler
(Strap)
Upper
Chord
Part UsageInstallationSheetAirplane Effectivity (Basic
Numbers)
-120-122-112Production-746, PL,
PSDL
R1093-R1093 R1107-R1107
R1114-R1114 R1117-R1120
R1126-R1126 R1137-R1137
R1144-R1145 R1152-R1152
R1154-R1154 R1158-R1158
R1162-R1162 R1164-R1165
R1180-R1180 R1182-R1182
R1203-R1203 R1247-R1248
R1550-R1550 R1552-R1552
R1562-R1562 R1570-R1571
R1573-R1573 R1576-R1577
R1590-R1590 R3013-R3015
R3031-R3032 R3035-R3035
R3302-R3305
(h)(d)(a)
-120-141-139Production-134, -2486, 8, PL,
PSDL
R0351-R0353 R0355-R0365
R0367-R0367 R0372-R0373
R0377-R0379 R1147-R1147
R1151-R1151 R1235-R1236
R1244-R1244 R1253-R1253
R1267-R1267 R1566-R1566
R1569-R1569 R3024-R3024
R3026-R3027
(h)(e)(a)
Appendix A: UPPER DECK FLOOR BEAM - UPPER CHORD DATA
(SHEET 4 OF 46)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 22, 2012
747-53A2852
144 of 189
BOEING SERVICE BULLETIN 747-53A2852
ALERTALERT

The text continues at https://openairdocs.org/service-documents/boeing/747-53a2852/file/5f45669c09d2.md?from=145

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
