# Boeing Alert Service Bulletin 747-53A2854: No revision named, from page 13

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2013-0205; AD 2013-13-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 747-53A2854](https://openairdocs.org/service-documents/boeing/747-53a2854.md)
- Title as filed: U.S. DOT/FAA - SB-747-53A2854-00
- Pages: 33
- PDF: https://openairdocs.org/files/sha256/3e/6e/3e6e87fcfd8a54f3ce02347aaedf483c1c6dc7dc7817849f7a4a955abeff8560
- Page: https://openairdocs.org/service-documents/boeing/747-53a2854/file/3e6e87fcfd8a

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 13

G. Manpower
The table below shows an estimate of the task hours necessary to do this inspection for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Group 1:
Table 1 - Skin Inspection in Section 42, 44 and 46
Elapsed HoursTask HoursNumber of PersonsTask
0.500.501Prepare
28.0056.002Inspect (Figure 1)
28.5056.50TOTAL FOR EACH AIRPLANE
Group 2:
Table 2 - Skin Inspection in Section 42
Elapsed HoursTask HoursNumber of PersonsTask
0.500.501Prepare
4.759.502Inspect (Figure 2)
5.2510.00TOTAL FOR EACH AIRPLANE
NOTE: More time will be required for repairs if cracks are found.
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not applicable.
J. References
1. Existing Data:
a. Boeing Service Bulletin 757-53-0097
b. Boeing Service Letter 747-SL-51-048, 747-SL-53-088A
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 17, 2012
747-53A2854
13 of 33
BOEING SERVICE BULLETIN 747-53A2854
ALERTALERT

### Page 14

c. Boeing Service Related Problem (SRP) 747-SRP-53-0396
d. Service Bulletin Index D6-30300
e. 747 Non-Destructive Testing (NDT) Manual Part 6, 53-30-25
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
Skin Panel Instl - STA 741.1 to STA 1000.0 Stgr 6 to Stgr 1265B04112
Skin Panel Instl - STA 520 to STA 1000 S-23R to S-34R65B18625
Skin Panel Instl - STA 1000 to STA 1200.0, Stgr 6 to Stgr 1265B18631
The table above lists applicable drawings used to prepare this service bulletin. The drawings are
not necessary to make the specified changes, and are not supplied with this service bulletin. The
drawings may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS but no new DTIs are necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 17, 2012
747-53A2854
14 of 33
BOEING SERVICE BULLETIN 747-53A2854
ALERTALERT

### Page 15

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the inspection and repair procedures given in this
service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
None.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 17, 2012
747-53A2854
15 of 33
BOEING SERVICE BULLETIN 747-53A2854
ALERTALERT

### Page 16

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 17, 2012
747-53A2854
16 of 33
BOEING SERVICE BULLETIN 747-53A2854
ALERTALERT
BLANK PAGE

### Page 17

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
4. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
5. Boeing Service Letter 747-SL-51-048, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
6. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
7. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
B. WORK INSTRUCTIONS
Group 1:
SKIN INSPECTION
1. Get external access and do external sliding probe eddy current inspections for cracking in
accordance with FIGURE 1.
NOTE: If any part of the inspection area is covered by an external doubler, contact Boeing for
inspection instructions.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 17, 2012
747-53A2854
17 of 33
BOEING SERVICE BULLETIN 747-53A2854
ALERTALERT

### Page 18

2. If any cracking is found, contact Boeing for repair data and do the repair.
3. Put the airplane back in a serviceable condition. Do the external sliding probe eddy current
inspections again in all affected unrepaired areas at the time given in Paragraph 1.E., Compliance,
Table 1.
Group 2:
SKIN INSPECTION
1. Get external access and do external sliding probe eddy current inspections for cracking in
accordance with FIGURE 2.
NOTE: If any part of the inspection area is covered by an external doubler, contact Boeing for
inspection instructions.
2. If any cracking is found, contact Boeing for repair data and do the repair.
3. Put the airplane back in a serviceable condition. Do the external sliding probe eddy current
inspections again in all affected unrepaired areas at the time given in Paragraph 1.E., Compliance,
Table 2.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 17, 2012
747-53A2854
18 of 33
BOEING SERVICE BULLETIN 747-53A2854
ALERTALERT

### Page 19 (OCR)

BOEING SERVICE BULLETIN 747-53A2854
ALERT  ALERT
This Figure applies only to: Group 1.
STA
1000
STA  STA  STA  1200  STA  STA
135  520  800  1350
STA
1240
- S-4L
S-12L
STA
2140
STA  STA  STA  SIA  STA
1350  1740  1961  2084  2360
• S-4L
- S-12L
- S-46L
S-40L -
S-46L -
2147405
FIGURE 1: SKIN INSPECTION IN SECTION 42, 44 AND 46
(SHEET 1 OF 11)
Original Issue: September 17, 2012
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2854
Work - See page 1 for details.  19 of 33

### Page 20 (OCR)

BOEING SERVICE BULLETIN 747-53A2854
ALERT  ALERT
STA
1000
STA
STA  1200  STA  STA  STA
1350  800  520  135
STA
1240
S-4R -
S-12R -
S-34R -
S-39R -
S-44R
STA  780  C
D
STA
2140  E
2360  STA  2084  STA  1961  STA  1740  STA  1350  STA
S-4R
S-12R
S-46R
- S-40R
- S-46R
2147412
FIGURE 1: SKIN INSPECTION IN SECTION 42, 44 AND 46
(SHEET 2 OF 11)
Original Issue: September 17, 2012
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright @ Unpublished  747-53A2854
Work - See page 1 for details.  20 of 33

### Page 21 (OCR)

BOEING SERVICE BULLETIN 747-53A2854
ALERT  ALERT
STA
1000
STA  STA  STA  STA  STA  STA
800  1020  1040  1060  1080  1100
STA  STA  STA  STA  STA  STA
1100  1120  1140  1160  1180  1199.0
S-12-
FWD
LEFT SIDE SHOWN
RIGHT SIDE OPPOSITE
2177132
FIGURE 1: SKIN INSPECTION IN SECTION 42, 44 AND 46
(SHEET 3 OF 11)
Original Issue: September 17, 2012
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2854
Work - See page 1 for details.  21 of 33

### Page 22 (OCR)

BOEING SERVICE BULLETIN 747-53A2854
ALERT  ALERT
STA  STA  STA  STA  STA  STA
1961.10  1980  2000  2020  2040  2062
- S-46
STA
STA  STA  2360
STA  2104
2062  2084
- S-46
FWD  LEFT SIDE SHOWN
RIGHT SIDE OPPOSITE
2177853
FIGURE 1: SKIN INSPECTION IN SECTION 42, 44 AND 46
(SHEET 4 OF 11)
Original Issue: September 17, 2012
Export Controlled ECCN: 9E991 - BOEING  747-53A2854
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  22 of 33

### Page 23 (OCR)

BOEING SERVICE BULLETIN 747-53A2854
ALERT  ALERT
STA  VIS  STA
560  540  520
— S-34
RIGHT SIDE ONLY
FWD
STA  SIA  SIA  STA  STA
780  760  740  700  680
S-34
RIGHT SIDE ONLY
2177987
FIGURE 1: SKIN INSPECTION IN SECTION 42, 44 AND 46
(SHEET 5 OF 11)
Original Issue: September 17, 2012
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2854
Work - See page 1 for details.  23 of 33

### Page 24

FIGURE 1: SKIN INSPECTION IN SECTION 42, 44 AND 46
(SHEET 6 OF 11)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 17, 2012
747-53A2854
24 of 33
BOEING SERVICE BULLETIN 747-53A2854
ALERTALERT

### Page 25 (OCR)

BOEING SERVICE BULLETIN 747-53A2854
ALERT  ALERT
EDGE OF INTERNAL
1 CHEM-MILLED STEP
IN OVERLAPPING SKIN
3.01  - S-12L
OVERLAPPING
SKIN
OVERLAPPED
TYPICAL  SKIN
EDGE OF INTERNAL
CHEM-MILLED STEP
IN OVERLAPPING SKIN
2.90
2.78  - S-46L
OVERLAPPING
SKIN
FWD  OVERLAPPED
TYPICAL  SKIN
G  2148076
FIGURE 1: SKIN INSPECTION IN SECTION 42, 44 AND 46
(SHEET 7 OF 11)
Original Issue: September 17, 2012
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2854
Work - See page 1 for details.  25 of 33

### Page 26 (OCR)

BOEING SERVICE BULLETIN 747-53A2854
ALERT  ALERT
EDGE OF INTERNAL
1) CHEM-MILLED STEP
IN OVERLAPPING SKIN
3.20
3.10  - S-34R
• 0
OVERLAPPING
SKIN
OVERLAPPED
SKIN
TYPICAL
CHEM-MILLED
' STEP
OVERLAPPED
SKIN
OVERLAPPING
SKIN
A-A  2148142
FIGURE 1: SKIN INSPECTION IN SECTION 42, 44 AND 46
(SHEET 8 OF 11)
Original Issue: September 17, 2012
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-53A2854
Work - See page 1 for details.  26 of 33

### Page 27 (OCR)

BOEING SERVICE BULLETIN 747-53A2854
ALERT  ALERT
EDGE OF  FORWARD  CARGO DOOR  CUTOUT  S-33R  OVERLAPPED  OVERLAPPED
SKIN  CHEM-MILLED  SKIN
STEP
EDGE OF INTERNAL  CHEM-MILLED STEP IN  OVERLAPPING  OVERLAPPING  SKIN  OVERLAPPING -  SKIN
2.96  2.86  RIGHT SIDE ONLY
OVERLAPPING SKIN  VIS  08L
6.15  7.15  FWD
2147505
FIGURE 1: SKIN INSPECTION IN SECTION 42, 44 AND 46
(SHEET 9 OF 11)
Original Issue: September 17, 2012
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2854
Work - See page 1 for details.  27 of 33

### Page 28 (OCR)

BOEING SERVICE BULLETIN 747-53A2854
ALERT  ALERT
EDGE OF INTERNAL
1) CHEM-MILLED STEP
IN OVERLAPPING SKIN
2.90
2.80  - S-12L
OVERLAPPING
SKIN
OVERLAPPED
SKIN
TYPICAL
CHEM-MILLED
' STEP
OVERLAPPED
SKIN
OVERLAPPING
SKIN
C-C
FIGURE 1: SKIN INSPECTION IN SECTION 42, 44 AND 46
(SHEET 10 OF 11)
Original Issue: September 17, 2012
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-53A2854
Work - See page 1 for details.  28 of 33

### Page 29

The step number shown below agrees with the number shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
Do external sliding
probe eddy current
inspections of the
skin for cracks just
above the upper row
of fasteners in the
affected lap joint in
accordance with 747
NDT Part 6, 53-30-
25.
--SkinInspect1
FIGURE 1: SKIN INSPECTION IN SECTION 42, 44 AND 46
(SHEET 11 OF 11)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 17, 2012
747-53A2854
29 of 33
BOEING SERVICE BULLETIN 747-53A2854
ALERTALERT

### Page 30 (OCR)

BOEING SERVICE BULLETIN 747-53A2854
ALERT  ALERT
This Figure applies only to: Group 2.
STA  STA  STA  STA
135  520  740  880  1000  STA  1220  STA  1350  STA
- S-4L
- S-12L
0000000
LEFT SIDE
STA  STA  STA  STA  STA
STA  STA  1000  880  740  520  135
1350  1220
S-4R -
S-12R •
0000000  0 0
RIGHT SIDE
2148160
FIGURE 2: SKIN INSPECTION IN SECTION 42
(SHEET 1 OF 4)
Original Issue: September 17, 2012
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright @ Unpublished
Work - See page 1 for details.  30 of 33

### Page 31

FIGURE 2: SKIN INSPECTION IN SECTION 42
(SHEET 2 OF 4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 17, 2012
747-53A2854
31 of 33
BOEING SERVICE BULLETIN 747-53A2854
ALERTALERT

### Page 32 (OCR)

BOEING SERVICE BULLETIN 747-53A2854
ALERT  ALERT
EDGE OF INTERNAL
1 CHEM-MILLED STEP
IN OVERLAPPING SKIN
3.27
3.17  - S-12L
OVERLAPPING
SKIN
FWD
OVERLAPPED
TYPICAL  SKIN
B
CHEM-MILLED
STEP
- OVERLAPPED
SKIN
OVERLAPPING •
SKIN
A-A
FIGURE 2: SKIN INSPECTION IN SECTION 42
(SHEET 3 OF 4)
Original Issue: September 17, 2012
Export Controlled ECCN: 9E991 - BOEING  747-53A2854
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  32 of 33

### Page 33

The step number shown below agrees with the number shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
Do external sliding
probe eddy current
inspections of the
skin for cracks just
above the upper row
of fasteners in the
affected lap joint in
accordance with 747
NDT Part 6, 53-30-
25.
--SkinInspect1
FIGURE 2: SKIN INSPECTION IN SECTION 42
(SHEET 4 OF 4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 17, 2012
747-53A2854
33 of 33
BOEING SERVICE BULLETIN 747-53A2854
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
