# Boeing Alert Service Bulletin 747-53A2887: No revision named, from page 13

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-8181; AD 2016-26-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 747-53A2887](https://openairdocs.org/service-documents/boeing/747-53a2887.md)
- Title as filed: SB BOEING-747-53A2887-00
- Pages: 85
- PDF: https://openairdocs.org/files/sha256/1f/0c/1f0cd8aee6e2a5bba22b89726972f9575ba3b698d482164d7c770238de91aea6
- Page: https://openairdocs.org/service-documents/boeing/747-53a2887/file/1f0cd8aee6e2

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 13

GroupVariable Number
1RD651 - RD659
1RD661
1RD671
1RD681 - RD682
1RD691 - RD692
1RD701 - RD702
1RD721 - RD722
1RD741 - RD742
1RD751 - RD755
1RD761
1RD771 - RD775
1RD781 - RD783
1RD791
3RD792
1RE001
3RF001 - RF006
1RG001 - RG009
1RG091
1RG095
1RG101 - RG104
1RG121 - RG126
1RG141 - RG142
1RG161 - RG164
1RG171 - RG174
1RG191 - RG193
1RG211 - RG213
1RG221 - RG222
1RH101 - RH102
1RH111 - RH112
1RH121 - RH122
4RJ131 - RJ133
4RJ151 - RJ152
4RJ301 - RJ303
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
13 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 14

GroupVariable Number
4RJ321
5RJ322
4RJ331 - RJ333
5RL401 - RL403
5RL411 - RL436
5RL451 - RL456
5RL461 - RL462
5RL471 - RL481
5RL491 - RL492
5RL501 - RL502
5RL511 - RL516
5RL521 - RL522
5RL531 - RL534
5RL551
5RL561 - RL568
5RL571 - RL572
5RL576 - RL577
5RL579
5RL581 - RL586
5RL651 - RL655
5RL671 - RL675
5RL681 - RL684
5RL751 - RL752
3RM001 - RM007
3RM010 - RM013
3RM021 - RM024
3RM026 - RM030
3RM036 - RM045
3RM051 - RM053
3RM071
3RM081 - RM084
3RM091
3RM096 - RM097
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
14 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 15

GroupVariable Number
3RM116 - RM117
3RM126 - RM132
3RM136 - RM147
3RM156 - RM158
3RM166 - RM177
3RM191 - RM192
3RM231 - RM233
3RM241 - RM246
3RM261 - RM264
3RM316 - RM318
3RM331 - RM333
3RM341
3RM351 - RM355
3RM366 - RM367
3RM401 - RM403
3RM426
3RM431
3RM441 - RM443
3RM445
3RM801 - RM803
3RM811 - RM813
5RM851 - RM859
5RM861 - RM863
5RM871 - RM899
5RM901 - RM906
5RM911
4RR001 - RR005
4RR021 - RR023
5RR024 - RR025
4RR031
4RR201 - RR205
5RR206
4RR221 - RR226
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
15 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 16

GroupVariable Number
4RR261 - RR267
4RR301 - RR306
5RR307 - RR310
4RR331 - RR332
4RR336
4RR341 - RR345
4RR361 - RR362
4RR421 - RR422
4RR431 - RR432
6RR441
5RR442
5RR451
4RR501 - RR504
4RR521
5RR522
5RR526
4RR531
4RR551 - RR553
6RR554
5RR555 - RR556
4RR561
5RR566
5RR701
5RR721 - RR724
5RR746 - RR748
5RR851 - RR856
5RR861 - RR862
5RR951 - RR952
1RS001 - RS002
1RS201
1RS211 - RS212
1RS221 - RS222
1RS231 - RS241
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
16 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 17

GroupVariable Number
1RS251 - RS258
2RS259
3RS263
2RS265 - RS268
1RS271 - RS276
1RS291 - RS292
1RS301 - RS304
2RS305
3RS306
1RS311 - RS320
3RS331 - RS333
1RS341
2RS342
1RS699
1RS701 - RS702
2RS703
1RS711 - RS713
1RS721 - RS722
3RS731 - RS732
1RS741 - RS743
1RS751 - RS752
1RS761
3RS762
1RS771
3RS781 - RS782
3RS786
3RT001 - RT014
3RT021 - RT022
3RT031 - RT035
3RT041 - RT047
3RT061
3RT071 - RT075
3RT101 - RT103
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
17 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 18

GroupVariable Number
3RT121
3RT131 - RT137
3RT151 - RT152
3RT161 - RT168
3RT401 - RT412
3RT431 - RT447
3RT451 - RT469
3RT471 - RT499
3RT501 - RT535
3RT551 - RT568
3RT571 - RT591
3RT601 - RT657
3RT671 - RT673
3RT681 - RT682
3RT691 - RT699
3RT701 - RT704
3RT711 - RT717
3RT741 - RT757
3RT776 - RT777
3RT781 - RT784
3RT801 - RT803
3RT811 - RT814
3RT831 - RT837
3RT861 - RT864
3RT876 - RT880
3RT931 - RT932
3RT945 - RT949
3RT951 - RT955
3RT966 - RT967
3RU001 - RU006
3RU016 - RU017
3RU031 - RU032
3RU051 - RU052
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
18 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 19

GroupVariable Number
3RU059 - RU062
3RU081 - RU083
3RU101 - RU102
3RU121 - RU132
3RU801 - RU809
3RU831 - RU841
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
This service bulletin gives instructions to do the modification required in accordance with service bulletin
747-53A2293 Areas 1, 3 and 4. If the modification work has been previously accomplished in accordance
with service bulletin 747-53A2293, then there is no further modification work required. The modification
provided in service bulletin 747-53A2293 for Areas 1, 3, and 4 must be completed to meet the intent
of Widespread Fatigue Damage (WFD) methods. This service bulletin also gives instructions to inspect
for fatigue cracking in the Nose Wheel Well Body Structure. If the inspections given in this service
bulletin are not done, fatigue cracking could remain undetected. Such fatigue cracking could adversely
affect the structural integrity of the airplane.
Boeing Service Related Problem (SRP) 747-SRP-53-0479 is related to this service bulletin.
This service bulletin is related to the following service bulletins:
TitleBoeing Service Bulletin
FUSELAGE - Nose Section 41 - Body Frame Structure Inspections and Crack
Repairs
747-53A2265
FUSELAGE-NOSE SECTION 41 BODY FRAME STRUCTURE REPLACE-
MENT AND REINFORCEMENT
747-53A2272
FUSELAGE - NOSE WHEEL WELL - BODY STRUCTURE REINFORCEMENT747-53A2293
FUSELAGE - MAIN FRAME - WHEEL WELLS NOSE WHEEL WELL SIDE-
WALL AND VERTICAL BEAM INSPECTION AND REPAIR
747-53A2338
FUSELAGE - Inspections Based On Fatigue Test Results747-53A2349
FUSELAGE - Main Frame - Inspections Based on Fatigue Test Results747-53A2500
FUSELAGE - Main Frame - Nose Wheel Well Side Panel and Top Panel -
Web and Stiffener Inspection
747-53A2465
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
19 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 20

TitleBoeing Service Bulletin
FUSELAGE - Main Frame - Nose Wheel Well Side and Top Panel - Web and
Stiffener Replacement
747-53A2562
FUSELAGE - Main Frame - Nose Wheel Well Side and Top Panel - Web and
Stiffener Replacement
747-53A2808
FUSELAGE - Nose Section 41 - Body Frame Structure Inspections and Crack
Repairs
747-53A2732
FUSELAGE - Nose Section 41 - Body Frame Structure Inspections and Crack
Repairs
747-53A2753
D. Description
Group 1, 4:
Do the modification in accordance with service bulletin 747-53A2293 at the times given in Paragraph
1.E., Compliance of this service bulletin. If the modification work has been done in accordance with
service bulletin 747-53A2293, no further modification work is required. Do a detailed inspection of the
vertical beams, vertical beam clips, main deck floor beams and the fore aft stiffeners for cracks and do
a surface or open hole High Frequency Eddy Current (HFEC) inspection of the vertical beams outer
chord and web for cracks. If any crack is found, do a detailed inspection of adjacent structure to
determine the full extent of the damage, contact The Boeing Company for repair instructions and do
the repair, then repeat detailed inspection and surface or open hole HFEC inspections at the times
given in Paragraph 1.E., Compliance. If no crack is found, repeat detailed inspection and surface or
open hole HFEC inspections at the times given in Paragraph 1.E., Compliance.
Group 2-3, 5-6:
Do a detailed inspection of the vertical beams, vertical beam clips, main deck floor beams and the
stiffeners for cracks. If any crack is found, do a detailed inspection of adjacent structure to determine
the full extent of the damage, contact The Boeing Company for repair instructions and do the repair,
then repeat detailed inspections for cracks at the times given in Paragraph 1.E., Compliance. If no
crack is found, repeat detailed inspections for cracks at the times given in Paragraph 1.E., Compliance.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
113, 114747-100, 747-100B, 747-100B
SUD, 747-200B, 747-300,
747SP, 747SR
Group 2:
Affected Maintenance Zones
ZoneModel
113, 114747-300
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
20 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 21

Group 3:
Affected Maintenance Zones
ZoneModel
113, 114747-200B, 747-300, 747-400,
747-400D
Group 4:
Affected Maintenance Zones
ZoneModel
113, 114747-200C, 747-200F
Group 5:
Affected Maintenance Zones
ZoneModel
113, 114747-200C, 747-200F, 747-400F
Group 6:
Affected Maintenance Zones
ZoneModel
113, 114747-200F
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive
related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times
given in this service bulletin mandatory.
Federal Aviation Administration (FAA) Airworthiness Directive AD 90-06-14 R1 is related to this service
bulletin. The effective date of AD 90-06-14 R1 is April 24, 1990.
Federal Aviation Administration (FAA) Airworthiness Directive AD 2001-14-18 is related to this service
bulletin. The effective date of AD 2001-14-18 is August 30, 2001.
Do the required actions in accordance with Paragraph 3. Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Logic diagrams showing compliance tasks and compliance times are included as an aid in APPENDIX
A and APPENDIX B.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
21 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 22

Group 1, 4:
Table 1 - Modification and Inspection
Repeat Inter-
val (Not to Ex-
ceed)
Compliance time (Whichever is later)ActionCondition
-Within 4 years after the original
issue date of this service bulletin.
Before 20,000 to-
tal flight cycles.
Do PART 1: MODIFI-
CATION.
All airplanes
-Within 12
months after
the original is-
sue date of this
service bul-
letin.
Within 3,000
flight cycles after
PART 1: MODIFI-
CATION.
Before 25,000 to-
tal flight cycles.
Do PART 2: NOSE
WHEEL WELL BODY
STRUCTURE DE-
TAILED INSPEC-
TION for any crack.
All airplanes that
have done PART
1: MODIFICA-
TION
-Within 2,200 flight cycles after the
original issue date of this service
bulletin.
Before 30,000 to-
tal flight cycles.
Do PART 3: STA
280-320 VERTICAL
BEAM OUTER
CHORD AND WEB
SURFACE OR OPEN
HOLE HIGH FRE-
QUENCY EDDY
CURRENT (HFEC)
INSPECTION for any
crack.
-Before further flight.CONDITION 1 (AC-
TION 1): Do PART 4:
SECONDARY IN-
SPECTION AND RE-
PAIR.
CONDITION 1:
ANY CRACK
FOUND during
PART 2.
3,000 flight cy-
cles.
-CONDITION 1 (AC-
TION 2): Repeat
PART 2: NOSE
WHEEL WELL BODY
STRUCTURE DE-
TAILED INSPEC-
TION for any crack at
unrepaired areas on-
ly.
3,000 flight cy-
cles.
-Repeat PART 2:
NOSE WHEEL WELL
BODY STRUCTURE
DETAILED INSPEC-
TION for any crack at
unrepaired areas on-
ly.
CONDITION 2:
NO CRACK
FOUND during
PART 2.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
22 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 23

Group 1, 4:
Table 1 - Modification and Inspection
Repeat Inter-
val (Not to Ex-
ceed)
Compliance time (Whichever is later)ActionCondition
-Before further flight.CONDITION 3 (AC-
TION 1): Do PART 4:
SECONDARY IN-
SPECTION AND RE-
PAIR.
CONDITION 3:
SURFACE HIGH
FREQUENCY
EDDY CUR-
RENT (HFEC)
INSPECTION
DONE. ANY
CRACK FOUND
during PART 3.
3,000 flight cy-
cles.
-CONDITION 3 (AC-
TION 2): Repeat
PART 3: STA 280-
320 VERTICAL
BEAM OUTER
CHORD AND WEB
SURFACE OR OPEN
HOLE HIGH FRE-
QUENCY EDDY
CURRENT (HFEC)
INSPECTION for any
crack at unrepaired
areas only.
3,000 flight cy-
cles.
-Repeat PART 3: STA
280-320 VERTICAL
BEAM OUTER
CHORD AND WEB
SURFACE OR OPEN
HOLE HIGH FRE-
QUENCY EDDY
CURRENT (HFEC)
INSPECTION for any
crack at unrepaired
areas only.
CONDITION 4:
SURFACE HIGH
FREQUENCY
EDDY CUR-
RENT (HFEC)
INSPECTION
DONE. NO
CRACK FOUND
during PART 3.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
23 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 24

Group 1, 4:
Table 1 - Modification and Inspection
Repeat Inter-
val (Not to Ex-
ceed)
Compliance time (Whichever is later)ActionCondition
-Before further flight.CONDITION 5 (AC-
TION 1): Do PART 4:
SECONDARY IN-
SPECTION AND RE-
PAIR.
CONDITION 5:
OPEN HOLE
HIGH FREQUEN-
CY EDDY CUR-
RENT (HFEC)
INSPECTION
DONE. ANY
CRACK FOUND
during PART 3.
6,000 flight cy-
cles.
-CONDITION 5 (AC-
TION 2): Repeat
PART 3: STA 280-
320 VERTICAL
BEAM OUTER
CHORD AND WEB
SURFACE OR OPEN
HOLE HIGH FRE-
QUENCY EDDY
CURRENT (HFEC)
INSPECTION for any
crack at unrepaired
areas only.
-Before further flight.CONDITION 6 (AC-
TION 1): Install new
fasteners.
CONDITION 6:
OPEN HOLE
HIGH FREQUEN-
CY EDDY CUR-
RENT (HFEC)
INSPECTION
DONE. NO
CRACK FOUND
during PART 3.
6,000 flight cy-
cles.
-CONDITION 6 (AC-
TION 2): Repeat
PART 3: STA 280-
320 VERTICAL
BEAM OUTER
CHORD AND WEB
SURFACE OR OPEN
HOLE HIGH FRE-
QUENCY EDDY
CURRENT (HFEC)
INSPECTION for any
crack at unrepaired
areas only.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
24 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 25

Group 2-3, 5-6:
Table 2 - Detailed Inspection
Repeat Interval
(Not to Exceed)
Compliance time (Whichever is later)ActionCondition
-Within 3,000 flight
cycles after the
original issue date
of this service bul-
letin.
Before 25,000 total
flight cycles.
Do PART 2: NOSE
WHEEL WELL
BODY STRUC-
TURE DETAILED
INSPECTION for
any crack.
All airplanes
-Before further flight.CONDITION 1
(ACTION 1): Do
PART 4: SEC-
ONDARY INSPEC-
TION AND RE-
PAIR.
CONDITION 1:
ANY CRACK
FOUND during
PART 2.
3,000 flight cycles.-CONDITION 1
(ACTION 2): Re-
peat PART 2:
NOSE WHEEL
WELL BODY
STRUCTURE DE-
TAILED INSPEC-
TION for any crack
at unrepaired areas
only.
3,000 flight cycles.-Repeat PART 2:
NOSE WHEEL
WELL BODY
STRUCTURE DE-
TAILED INSPEC-
TION for any crack
at unrepaired areas
only.
CONDITION 2: NO
CRACK FOUND
during PART 2.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
25 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 26

G. Manpower
The following breakdown of manpower requirements is suggested as a guide to assist operators in
planning and accomplishing this modification. This estimate is for direct labor performed by an
experienced crew. It does not include setup, planning, familiarization, cure time, part fabrication, tool
acquisition, or lost time. Factor this estimate as necessary based on your own experience.
The manpower estimates are given for the following options:
• Inspection for each area
• Modification for each area
• Inspection for each inspection interval
• Modification for each airplane group
Group 1, 4:
Elapsed HoursTask HoursNumber of PersonsTask
4.008.002Open Access
70.00140.002Detailed Inspection
1.553.102Surface HFEC In-
spection
1.553.102Open Hole HFEC In-
spection
4.008.002Close Access
81.10162.20TOTAL FOR EACH AIRPLANE
Group 2-3, 5-6:
Elapsed HoursTask HoursNumber of PersonsTask
4.008.002Open Access
70.00140.002Detailed Inspection
4.008.002Close Access
78.00156.00TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
26 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 27

J. References
1. Existing Data:
a. Boeing Service Bulletin 747-53A2265, 747-53A2272, 747-53A2293, 747-53A2338,
747-53A2349, 747-53A2465, 747-53A2500, 747-53A2562, 747-53A2732, 747-53A2753,
747-53A2808
b. Boeing Service Letter 747-SL-51-048
c. Boeing Service Related Problem (SRP) 747-SRP-53-0479
d. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2001-14-18, 90-06-14 R1
e. Service Bulletin Index D6-30300
f. Standard Overhaul Practices Manual (SOPM) 20-50-01, 20-50-19
g. 747 Non-Destructive Testing (NDT) Manual Part 6, Section 51-00-00, Part 6, Section 53-30-19
h. 747-100/200/300 Aircraft Maintenance Manual (AMM) 25-00-00
i. 747-100/200/300 Structural Repair Manual (SRM) 51-30-02
j. 747-400 Aircraft Maintenance Manual (AMM) 25-00-00
k. 747-SP Structural Repair Manual (SRM) 51-30-02
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
Frame Installation - Body Station 30065B01708
Frame Installation - Body Station 32065B01709
Side Panel Installation65B07942
The table above lists applicable drawings used to prepare this service bulletin. These drawings
are not necessary to make the specified changes, and are not supplied with this service bulletin.
The drawings may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
27 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 28

Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS but no new DTIs are necessary.
L. Interchangeability and Intermixability of Parts
None.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
28 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 29

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the inspection and/or repair procedures given in this
service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
The following parts or materials are necessary to do the change in this service bulletin. Parts and
materials in the manuals given in Paragraph 1.J., References, can also be necessary. Examine
operator part and material supply to make sure all necessary parts and materials are available.
Group 1:
NotesNameQTYPart Number /
Specification
Or BACR15BB10AD.Rivet12BACR15ET9D
Or BACR15ET9D.Rivet12BACR15BB10AD
Group 4:
NotesNameQTYPart Number /
Specification
Or BACB30MY6K6Y.Bolt12BACB30MY6K6X
Or BACB30MY6K6X.Bolt12BACB30MY6K6Y
To be installed with bolt
BACB30MY6K6X.
Collar12BACC30M6
To be installed with bolt
BACB30MY6K6Y.
Collar12BACC30AC6
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
29 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 30

D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
30 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 31

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 747 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 747
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 747
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
5. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate
full threaded fasteners (screws) needed for installation in this service bulletin.
6. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
31 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 32

7. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
8. Boeing Service Letter 747-SL-51-048, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
9. Refer to Appendix A and B for logic diagrams. Logic diagrams are provided as an
aid only. Information contained in Paragraph 1.E., Compliance is the primary source
for compliance times. Information in Paragraph 3.B., Work Instructions is the primary
source for tasks required for compliance.
10. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
11. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
12. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
13. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
14. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an
OPTION number, do all of the ACTION numbers for that CONDITION number or
OPTION number.
15. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
16. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. An Alternative Method of
Compliance (AMOC) is required for any deviations to RC steps, including sub-steps
and identified figures. Steps not labeled as RC may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC. This is provided that the RC steps, including
sub-steps and identified figures, can still be done as specified, and the airplane can
be put back in an airworthy condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
32 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 33

B. WORK INSTRUCTIONS
1. Get access to nose wheel well top and side wall panels. Remove and keep insulation blankets.
Refer to 747-100/200/300 AMM 25-00-00, or 747-400 AMM 25-00-00 as accepted procedures.
2. Group 1, 4:
RC- Do PART 1: MODIFICATION.
3. RC- Do PART 2: NOSE WHEEL WELL BODY STRUCTURE DETAILED INSPECTION for any
crack.
a. CONDITION 1: ANY CRACK FOUND during PART 2.
(1) CONDITION 1 (ACTION 1): Do PART 4: SECONDARY INSPECTION AND REPAIR.
(2) CONDITION 1 (ACTION 2): Repeat PART 2: NOSE WHEEL WELL BODY STRUCTURE
DETAILED INSPECTION for any crack at unrepaired areas only.
b. CONDITION 2: NO CRACK FOUND during PART 2.
(1) Repeat PART 2: NOSE WHEEL WELL BODY STRUCTURE DETAILED INSPECTION
for any crack at unrepaired locations only.
4. Group 1, 4:
RC- Do PART 3: STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB SURFACE OR
OPEN HOLE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION for any crack.
a. CONDITION 3: SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
DONE. ANY CRACK FOUND during PART 3.
(1) CONDITION 3 (ACTION 1): Do PART 4: SECONDARY INSPECTION AND REPAIR.
(2) CONDITION 3 (ACTION 2): Repeat PART 3: STA 280-320 VERTICAL BEAM OUTER
CHORD AND WEB SURFACE OR OPEN HOLE HIGH FREQUENCY EDDY CURRENT
(HFEC) INSPECTION for any crack at unrepaired areas only.
b. CONDITION 4: SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
DONE. NO CRACK FOUND during PART 3.
(1) Repeat PART 3: STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB SURFACE
OR OPEN HOLE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION for any
crack at unrepaired areas only.
c. CONDITION 5: OPEN HOLE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
DONE. ANY CRACK FOUND during PART 3.
(1) CONDITION 5 (ACTION 1): Do PART 4: SECONDARY INSPECTION AND REPAIR.
(2) CONDITION 5 (ACTION 2): Repeat PART 3: STA 280-320 VERTICAL BEAM OUTER
CHORD AND WEB SURFACE OR OPEN HOLE HIGH FREQUENCY EDDY CURRENT
(HFEC) INSPECTION for any crack at unrepaired areas only.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
33 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 34

d. CONDITION 6: OPEN HOLE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
DONE. NO CRACK FOUND during PART 3.
(1) Group 1:
CONDITION 6 (ACTION 1): Install new fasteners in accordance with FIGURE 9 and
FIGURE 10.
(2) Group 4:
CONDITION 6 (ACTION 1): Install new fasteners in accordance with FIGURE 11 and
FIGURE 12.
(3) CONDITION 6 (ACTION 2): Repeat PART 3: STA 280-320 VERTICAL BEAM OUTER
CHORD AND WEB SURFACE OR OPEN HOLE HIGH FREQUENCY EDDY CURRENT
(HFEC) INSPECTION for any crack at unrepaired areas only.
5. Install kept insulation blankets. Refer to 747-100/200/300 AMM 25-00-00, or 747-400 AMM 25-00-00
as accepted procedures.
6. Put the airplane back to serviceable condition.
Group 1, 4:
PART 1: MODIFICATION
1. Do the modification in accordance with service bulletin (SB) 747-53A2293 for areas 1, 3 and 4 in
accordance with the time given in Paragraph 1.E., Compliance of this Service Bulletin. If the
modification work was previously done in accordance with SB 747-53A2293, then there is no
further modification work required.
NOTE: In SB 747-53A2293, the Area 4 modification requires the same access as the Area 3
modification.
PART 2: NOSE WHEEL WELL BODY STRUCTURE DETAILED INSPECTION
1. Group 1-2, Configuration 1; Group 3, 5:
Do a detailed inspection of the left side nose wheel well body structure for any crack in accordance
with FIGURE 1.
2. Group 1-2, Configuration 1; Group 3, 5:
Do a detailed inspection of the right side nose wheel well body structure for any crack in accordance
with FIGURE 2.
3. Group 1-2, Configuration 2; Group 4, 6:
Do a detailed inspection of the left side nose wheel well body structure for any crack in accordance
with FIGURE 3.
4. Group 1-2, Configuration 2; Group 4, 6:
Do a detailed inspection of the right side nose wheel well body structure for any crack in accordance
with FIGURE 4.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
34 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 35

Group 1, 4:
PART 3: STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB SURFACE OR OPEN HOLE
HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
1. Do one of the following options:
a. OPTION 1:
(1) ACTION 1: Do a Surface HFEC Inspection of the left side STA 280-320 vertical beam
outer chord and web for any crack in accordance with FIGURE 5.
(2) ACTION 2: Do a Surface HFEC Inspection of the right side STA 280-320 vertical beam
outer chord and web for any crack in accordance with FIGURE 6.
b. OPTION 2:
(1) ACTION 1: Do an Open Hole HFEC Inspection of the left side STA 280-320 vertical beam
outer chord and web for any crack in accordance with FIGURE 7.
(2) ACTION 2: Do an Open Hole HFEC Inspection of the right side STA 280-320 vertical
beam outer chord and web for any crack in accordance with FIGURE 8.
PART 4: SECONDARY INSPECTION AND REPAIR
1. Do a detailed inspection for any crack within 20 inches of the original crack, to determine the full
extent of the damage.
2. Contact The Boeing Company for repair instructions and do the repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
35 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 36 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
This Figure applies only to: Group 1-2, Configuration 1; Group 3, 5.
STA
260
STA
260  / STA
CANTED STA  1280
340  /STA
300
STA
RBL 22  340
RBL 10
LBL 10 -
LBL 22 ~
2454876
FIGURE 1: LEFT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 1 OF 7)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  36 of 85

### Page 37 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
STA
280.
300
FLOORBEAM
TOP PANEL WEB
FORE AFT
STIFFENER
FORE AFT
STIFFENER
- BL
22
FORE AFT  STIFFENER (1  INTERCOSTAL
TYPICAL
CRACK
LOCATION  1 CLIP
POTENTIAL CRACK  TYPICAL STA 280-STA 300.  LBL 10 AND 22
LOCATION IN FORE AFT
STIFFENER
• INTERCOSTAL
BL
10
22
TYPICAL
U TOP PANEL  2454879
WEB
FIGURE 1: LEFT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 2 OF 7)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  37 of 85

### Page 38 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
® CHORD
1 SIDE WALL
VERTICAL  PANEL WEB
BEAM
VERTICAL
BEAM CLIP
TYPICAL CRACKS
IN VERTICAL
BEAM WEB
TYPICAL
INSULATION
BLANKET
STANDOFF/TOOL
HOLE LOCATION
2) HORIZONTAL
STIFFENER
VERTICAL (
BEAM CLIP
CHORD 1  STATIONS 260 THROUGH 320  (TYPICAL)
D
2454881
FIGURE 1: LEFT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 3 OF 7)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  38 of 85

### Page 39 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
MAIN DECK FLOOR BEAM
(AT STA 280, 300 AND 320 ONLY
VERTICAL BEAM 2
S-40L
S-41L
INBD
TYPICAL STATIONS 260 TO 320
A-A
FIGURE 1: LEFT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 4 OF 7)
Original Issue: December 02, 2015
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2887
Work - See page 1 for details.  39 of 85

### Page 40 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
STA
280
300
320
12.0
12.0
3) LOWER CHORI  FLOOR BEAN
® STRAP
STA
280
300
320
2) BEAM OUTER  VERTICAL
CHORD
TYPICAL
VERTICAL
BEAM
TYPICAL
CRACK
VERTICAL  BEAM WEB  ₴
VERTICAL BEAM (2
INNER CHORD
LOOF (3  FAM
LOWER CHORD 3  FLOOR BEAM  2454887
FIGURE 1: LEFT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 5 OF 7)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  40 of 85

### Page 41

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)--Fore Aft StiffenersInspect1
(b)--ClipsInspect
(c)--IntercostalInspect
(d)--Floor BeamInspect
(e)--Top Panel WebInspect
(f)--Vertical BeamInspect2
(f)--Vertical Beam WebInspect
(f)--Vertical Beam ChordInspect
(g)--Vertical Beam ClipsInspect
(h)--Horizontal StiffenersInspect
(i)--Main Deck Floor
Beams
Inspect3
(j)--Floor Beam Lower
Chords
Inspect
(k)--StrapsInspect
(a) Do a detailed inspection of the fore aft stiffeners, between Body Station (STA) 280 and STA 300, Left
Buttock Line (LBL) 10 and LBL 22, common to the top panel. Inspect from the top side, around all fastener
heads and in the stiffeners fillet radius, common to the horizontal flange attached to the nose wheel well
top panel web.
(b) Do a detailed inspection of all attachments of the clips to the fore aft stiffeners.
(c) Do a detailed inspection of the intercostals in the area surrounding the connection to the clip and the fore
aft stiffeners.
(d) Do a detailed inspection of the main deck floor beams in the area surrounding the connection to the fore
aft stiffeners.
(e) Do a detailed inspection of the top panel web in the area surrounding the connection to the fore aft stiff-
eners.
(f) Do a detailed inspection of the full length of the vertical beams, vertical beam webs and vertical beam
chords. Inspect both the forward and aft side of the beams. Inspect the joints between the vertical beams
and the frames and between the vertical beams and the main deck floor beams.
(g) Do a detailed inspection of all attachments of the vertical beam clips to the vertical beams, from inside
the fuselage.
(h) Do a detailed inspection of the horizontal stiffeners in the area surrounding the connection to the vertical
beams.
(i) Do a detailed inspection of the main deck floor beams, 12 inches outboard of the vertical beam to 12
inches inboard of the vertical beam. Inspect both the forward and aft side of the beams.
FIGURE 1: LEFT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 6 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
41 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 42

More DataQtyIdentificationNameTaskStep
(j) Do a detailed inspection of the floor beam lower chords, 12 inches outboard of the vertical beam to 12
inches inboard of the vertical beam. Inspect both the forward and aft side of the chord.
(k) Do a detailed inspection of the floor beam lower chords in the area around the ends of the reinforcing
straps.
FIGURE 1: LEFT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 7 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
42 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 43 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
This Figure applies only to: Group 1-2, Configuration 1; Group 3, 5.
STA
260
STA
260
STA  _ CANTED
340
280
STA
300
STA
340  32  - LBL 22
- LBL 10
-RBL 10
RBL 22
2455847
FIGURE 2: RIGHT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 1 OF 7)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  43 of 85

### Page 44 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
STA
280,
300
FLOORBEAM
TOP PANEL WEB
FORE AFT
STIFFENER
FORE AFT
STIFFENER
BL
22
FORE AFT
INTERCOSTAL  STIFFENER
TYPICAL
CRACK
BI  LOCATION
10
TYPICAL STA 280-STA 300,  POTENTIAL CRACK
RBL 10 AND 22  LOCATION IN
FORE AFT STIFFENER
INTERCOSTAL
1 TOP PANEL  2455863
WEB
FIGURE 2: RIGHT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 2 OF 7)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.

### Page 45 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
CHORD
SIDE WALL
PANEL WEB
VERTICAL
BEAM
2) VERTICAL
BEAM CLIP
TYPICAL CRACKS
IN VERTICAL
BEAM WEB
TYPICAL
INSULATION
BLANKET
STANDOFF/TOOL
HOLE LOCATION
HORIZONTAL
STIFFENER
2) VERTICAL
BEAM CLIF
STATIONS 260 THROUGH 320  CHORD
(TYPICAL
FIGURE 2: RIGHT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 3 OF 7)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  45 of 85

### Page 46 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
MAIN DECK FLOOR BEAM
(AT STA 230, 300 AND 320 ONLY)
2) VERTICAL BEAM
S-39R
S-40R
S-41R
INBD
TYPICAL STATIONS 260 TO 320  2455880
A-A
FIGURE 2: RIGHT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 4 OF 7)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  46 of 85

### Page 47 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
STA
280
300
320
12.0
FLOOR BEAM
LOWER CHORD
STRAP
VERTICAL
BEAM OUTER 2
CHORD
TYPICAL  BEAM  VERTICAL
TYPICAL
CRACK
VERTICAL
BEAM WEB
2) VERTICAL BEA  INNER CHORI
3 BEAM  FLOOR
FLOOR BEAI  2455892
/LOWER CHOR
FIGURE 2: RIGHT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 5 OF 7)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  47 of 85

### Page 48

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)--Fore Aft StiffenersInspect1
(b)--ClipsInspect
(c)--IntercostalInspect
(d)--Floor BeamInspect
(e)--Top Panel WebInspect
(f)--Vertical BeamInspect2
(f)--Vertical Beam WebInspect
(f)--Vertical Beam ChordInspect
(g)--Vertical Beam ClipsInspect
(h)--Horizontal StiffenersInspect
(i)--Main Deck Floor
Beams
Inspect3
(j)--Floor Beam Lower
Chords
Inspect
(k)--StrapsInspect
(a) Do a detailed inspection of the fore aft stiffeners, between Body Station (STA) 280 and STA 300, Right
Buttock Line (RBL) 10 and RBL 22, common to the top panel. Inspect from the top side, around all fastener
heads and in the stiffeners fillet radius, common to the horizontal flange attached to the nose wheel well
top panel web.
(b) Do a detailed inspection of all attachments of the clips to the fore aft stiffeners.
(c) Do a detailed inspection of the intercostals in the area surrounding the connection to the clip and the fore
aft stiffeners.
(d) Do a detailed inspection of the main deck floor beams in the area surrounding the connection to the fore
aft stiffeners.
(e) Do a detailed inspection of the top panel web in the area surrounding the connection to the fore aft stiff-
eners.
(f) Do a detailed inspection of the full length of the vertical beams, vertical beam webs and vertical beam
chords. Inspect both the forward and aft side of the beams. Inspect the joints between the vertical beams
and the frames and between the vertical beams and the main deck floor beams.
(g) Do a detailed inspection of all attachments of the vertical beam clips to the vertical beams, from inside
the fuselage.
(h) Do a detailed inspection of the horizontal stiffeners in the area surrounding the connection to the vertical
beams.
(i) Do a detailed inspection of the main deck floor beams, 12 inches outboard of the vertical beam to 12
inches inboard of the vertical beam. Inspect both the forward and aft side of the beams.
FIGURE 2: RIGHT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 6 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
48 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 49

More DataQtyIdentificationNameTaskStep
(j) Do a detailed inspection of the floor beam lower chords, 12 inches outboard of the vertical beam to 12
inches inboard of the vertical beam. Inspect both the forward and aft side of the chord.
(k) Do a detailed inspection of the floor beam lower chords in the area around the ends of the reinforcing
straps.
FIGURE 2: RIGHT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 7 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
49 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 50 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
This Figure applies only to: Group 1-2, Configuration 2; Group 4, 6.
STA
260
STA
260  A STA
CANTED STA  1280
340  /STA
300
STA
RBL 22  340
RBL 10
LBL 10 -
LBL 22 ~
2454877
FIGURE 3: LEFT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 1 OF 6)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  50 of 85

### Page 51 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
STA
280
300
FLOORBEAM
Q
TOP PANEL WEB
FORE AFT
STIFFENER
FORE AFT
STIFFENER
- BL
22
FORE AFT  STIFFENER 1  INTERCOSTAL
TYPICAL
CRACK
LOCATION  1 CLIP
POTENTIAL CRAC  TYPICAL STA 280-STA 300.  LBL 10 AND 22
OCATION IN FOR
AFT STIFFENER
1 INTERCOSTAL
BL
10
22
TYPICAL
1 TOP PANEL  2454880
WEB
FIGURE 3: LEFT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 2 OF 6)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  51 of 85

### Page 52 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
® CHORD
1 SIDE WALL
VERTICAL  PANEL WEB
BEAM
VERTICAL
BEAM CLIP
TYPICAL CRACKS
IN VERTICAL
BEAM WEB
TYPICAL
INSULATION
BLANKET
STANDOFF/TOOL
HOLE LOCATION
2) HORIZONTAL
STIFFENER
VERTICAL 3
BEAM CLIP
CHORDE  STATIONS 260 THROUGH 320  (TYPICAL)
D
2454883
FIGURE 3: LEFT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 3 OF 6)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  52 of 85

### Page 53 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
MAIN DECK FLOOR BEAM
(AT STA 280, 300 AND 320 ONLY)
VERTICAL BEAM 2
S-40L
S-41L
INED
TYPICAL STATIONS 260 TO 320
A-A
FIGURE 3: LEFT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 4 OF 6)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  53 of 85

### Page 54 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
STA
280
300
320
12.0
12.0
3) LOWER CHORI  FLOOR BEAI
STA
280
300
320
VERTICAL
(2) BEAM OUTER
CHORD
TYPICAL
VERTICAL
BEAM
TYPICAL
CRACK
VERTICAL
BEAM WEB
VERTICAL BEAM (2
INNER CHORD
LOOF (3  FAM
LOWER CHORD 3  FLOOR BEAM  2454894
FIGURE 3: LEFT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 5 OF 6)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  54 of 85

### Page 55

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)--Fore Aft StiffenersInspect1
(b)--ClipsInspect
(c)--IntercostalInspect
(d)--Floor BeamInspect
(e)--Top Panel WebInspect
(f)--Vertical BeamInspect2
(f)--Vertical Beam WebInspect
(f)--Vertical Beam ChordInspect
(g)--Vertical Beam ClipsInspect
(h)--Horizontal StiffenersInspect
(i)--Main Deck Floor
Beams
Inspect3
(j)--Floor Beam Lower
Chords
Inspect
(a) Do a detailed inspection of the fore aft stiffeners, between Body Station (STA) 280 and STA 300, Left
Buttock Line (LBL) 10 and LBL 22, common to the top panel. Inspect from the top side, around all fastener
heads and in the stiffeners fillet radius, common to the horizontal flange attached to the nose wheel well
top panel web.
(b) Do a detailed inspection of all attachments of the clips to the fore aft stiffeners.
(c) Do a detailed inspection of the intercostals in the area surrounding the connection to the clip and the fore
aft stiffeners.
(d) Do a detailed inspection of the floor beams in the area surrounding the connection to the fore aft stiffeners.
(e) Do a detailed inspection of the top panel web in the area surrounding the connection to the fore aft stiff-
eners.
(f) Do a detailed inspection of the full length of the vertical beams, vertical beam webs and vertical beam
chords. Inspect both the forward and aft side of the beams. Inspect the joints between the vertical beams
and the frames and between the vertical beams and the floor beams.
(g) Do a detailed inspection of all attachments of the vertical beam clips to the vertical beams, from inside
the fuselage.
(h) Do a detailed inspection of the horizontal stiffeners in the area surrounding the connection to the vertical
beams.
(i) Do a detailed inspection of the main deck floor beams, 12 inches outboard of the vertical beam to 12
inches inboard of the vertical beam. Inspect both the forward and aft side of the beams.
(j) Do a detailed inspection of the floor beam lower chords, 12 inches outboard of the vertical beam to 12
inches inboard of the vertical beam. Inspect both the forward and aft side of the chord.
FIGURE 3: LEFT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 6 OF 6)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
55 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 56 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
This Figure applies only to: Group 1-2, Configuration 2; Group 4, 6.
STA
260
STA
260
CANTED
STA
340
STA
280
STA
300
STA  STA
340  320  - LBL 20
- LBL 10
- RBL 10
RBL 22
2456026
FIGURE 4: RIGHT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 1 OF 6)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  56 of 85

### Page 57 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
FLOORBEAM
TOP PANEL WEB
FORE AFT
STIFFENER
FORE AFT
STIFFENER
BL
22
FORE AFT
INTERCOSTAL  STIFFENER
TYPICAL
CRACK
CLIP  LOCATION
BL
10
TYPICAL STA 280-STA 300,
RBL 10 AND 22  POTENTIAL CRACK
LOCATION IN FORE AFT
STIFFENER
INTERCOSTAL
*BL
TOP PANEL  10
WEB  22
TYPICAL
FIGURE 4: RIGHT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 2 OF 6)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  57 of 85

### Page 58 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
SIDE WALL  PANEL WEB  CHORD
VERTICAL
BEAM
2) VERTICAL
BEAM CLIP
TYPICAL CRACKS
•IN VERTICAL
BEAM WEB
TYPICAL
INSULATION
- BLANKET
STANDOFF/TOOL
HOLE LOCATION
HORIZONTAL
STIFFENER
2) VERTICAL
BEAM CLIP
STATIONS 260 THROUGH 320
(TYPICAL)  CHORD
2456061
FIGURE 4: RIGHT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 3 OF 6)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-53A2887
Work - See page 1 for details.  58 of 85

### Page 59 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
MAIN DECK FLOOR BEAM
(AT STA 280, 300 AND 320 ONLY)
3 VERTICAL BEAM
S-39R
S-40R
S-41R
INBD
TYPICAL STATIONS 260 TO 320  2456067
A-A
FIGURE 4: RIGHT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 4 OF 6)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  59 of 85

### Page 60 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
12.0
FLOOR BEAM
LOWER CHORD
VERTICAL
BEAM OUTER (2)
CHORD
*YPICA  • VERTICAL  BEAM
TYPICAL
CRACK
VERTICAL
BEAM WEB
-E WERE CAPE
3) BEA  FLOO
FLOOR BEAI  2456071
A LOWER CHOR
FIGURE 4: RIGHT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 5 OF 6)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  60 of 85

### Page 61

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)--Fore Aft StiffenersInspect1
(b)--ClipsInspect
(c)--IntercostalInspect
(d)--Floor BeamInspect
(e)--Top Panel WebInspect
(f)--Vertical BeamInspect2
(f)--Vertical Beam WebInspect
(f)--Vertical Beam ChordInspect
(g)--Vertical Beam ClipsInspect
(h)--Horizontal StiffenersInspect
(i)--Main Deck Floor
Beams
Inspect3
(j)--Floor Beam Lower
Chords
Inspect
(a) Do a detailed inspection of the fore aft stiffeners, between Body Station (STA) 280 and STA 300, Right
Buttock Line (RBL) 10 and RBL 22, common to the top panel. Inspect from the top side, around all fastener
heads and in the stiffeners fillet radius, common to the horizontal flange attached to the nose wheel well
top panel web.
(b) Do a detailed inspection of all attachments of the clips to the fore aft stiffeners.
(c) Do a detailed inspection of the intercostals in the area surrounding the connection to the clip and the fore
aft stiffeners.
(d) Do a detailed inspection of the floor beams in the area surrounding the connection to the fore aft stiffeners.
(e) Do a detailed inspection of the top panel web in the area surrounding the connection to the fore aft stiff-
eners.
(f) Do a detailed inspection of the full length of the vertical beams, vertical beam webs and vertical beam
chords. Inspect both the forward and aft side of the beams. Inspect the joints between the vertical beams
and the frames and between the vertical beams and the floor beams.
(g) Do a detailed inspection of all attachments of the vertical beam clips to the vertical beams, from inside
the fuselage.
(h) Do a detailed inspection of the horizontal stiffeners in the area surrounding the connection to the vertical
beams.
(i) Do a detailed inspection of the main deck floor beams, 12 inches outboard of the vertical beam to 12
inches inboard of the vertical beam. Inspect both the forward and aft side of the beams.
(j) Do a detailed inspection of the floor beam lower chords, 12 inches outboard of the vertical beam to 12
inches inboard of the vertical beam. Inspect both the forward and aft side of the chord.
FIGURE 4: RIGHT SIDE NOSE WHEEL WELL BODY STRUCTURE - DETAILED INSPECTION
(SHEET 6 OF 6)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
61 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 62 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
This Figure applies only to: Group 1, 4.
STA
260
STA  *STA
CANTED STA  260  ¡ 280
340
RBL 22.  STA  340
RBL 10 -
LBL 10 -
LBL 22 ~
2454901
FIGURE 5: LEFT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB - SURFACE HIGH
FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 1 OF 3)
Original Issue: December 02, 2015
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2887
Work - See page 1 for details.  62 of 85

### Page 63 (OCR)

BOEING SERVICE BULLETIN 747-53A2887C
ALERT  ALERT
VERTICAL
BEAM
WEB
VERTICAL
BEAM OUTER
CHORD
FLOOR
BEAM
TYPICAL
CRACK
INSPECTION AREA
FLOOR
BEAM
VERTICAL
BEAM OUTER
CHORD
VERTICAL
BEAM WEB  A-A
FIGURE 5: LEFT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB - SURFACE HIGH
FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 2 OF 3)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  63 of 85

### Page 64

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)--Vertical Beam WebInspect1
(b)--Vertical Beam Outer
Chord
Inspect2
(a) Do a surface High Frequency Eddy Current (HFEC) inspection on the edge of the vertical beam web for
any crack in accordance with 747 NDT Manual Part 6, Section 51-00-00, Procedure 4 or 23. Inspect from
above the fastener common to the floor beam lower chord down to below the fastener, below the floor
beam chord. Extend the inspection to the mid-point towards the next adjacent fastener.
Use a pencil probe with a diameter that is less than 0.08 inch (2 mm). The following probes are examples
of probes that can be used:
1. MXTF-40, straight probe, 0.050 inch (1.27 mm) diameter. NDT Engineering Corp. (Olympus)
2. MXTF902-40B, right angle, 0.050 inch (1.27 mm) diameter. NDT Engineering Corp. (Olympus)
3. SPC/501/AI, right angle, 0.043 inch (1.09 mm) width, 0.5 inch (12.7 mm) drop. EC NDT Inc
(b) Do a surface HFEC inspection 360 degrees around the two fastener heads of the vertical beam outer
chord for any crack in accordance with 747 NDT Manual Part 6, Section 53-30-19.
FIGURE 5: LEFT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB – SURFACE HIGH
FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
64 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 65 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
This Figure applies only to: Group 1, 4.
STA
260
STA
260
CANTED
STA
340
STA
280
STA
300
- LBL 22
- LBL 10
— RBL 10
• RBL 22
2456017
FIGURE 6: RIGHT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB - SURFACE HIGH
FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 1 OF 3)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  65 of 85

### Page 66 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
STA
280
300
320
VERTICAL
BEAM WEB
CHORD
FLOOR
BEAM
TYPICAL
CRACK
INSPECTION AREA
FLOOR
BEAM
VERTICAL
BEAM OUTER -
CHORD
VERTICAL
BEAM WEB
A-A  2456021
FIGURE 6: RIGHT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB - SURFACE HIGH
FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 2 OF 3)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-53A2887
Work - See page 1 for details.  66 of 85

### Page 67

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)--Vertical Beam WebInspect1
(b)--Vertical Beam Outer
Chord
Inspect2
(a) Do a surface High Frequency Eddy Current (HFEC) inspection on the edge of the vertical beam web for
any crack in accordance with 747 NDT Manual Part 6, Section 51-00-00, Procedure 4 or 23. Inspect from
above the fastener common to the floor beam lower chord down to below the fastener, below the floor
beam chord. Extend the inspection to the mid-point towards the next adjacent fastener.
Use a pencil probe with a diameter that is less than 0.08 inch (2 mm). The following probes are examples
of probes that can be used:
1. MXTF-40, straight probe, 0.050 inch (1.27 mm) diameter. NDT Engineering Corp. (Olympus)
2. MXTF902-40B, right angle, 0.050 inch (1.27 mm) diameter. NDT Engineering Corp. (Olympus)
3. SPC/501/AI, right angle, 0.043 inch (1.09 mm) width, 0.5 inch (12.7 mm) drop. EC NDT Inc
(b) Do a surface HFEC inspection 360 degrees around the two fastener heads of the vertical beam outer
chord for any crack in accordance with 747 NDT Manual Part 6, Section 53-30-19.
FIGURE 6: RIGHT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB – SURFACE HIGH
FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
67 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 68 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
This Figure applies only to: Group 1, 4.
STA
260
STA  *STA
CANTED STA  260  ¡ 280
340
RBL 22.  STA  340
RBL 10 -
LBL 10 -
LBL 22 ~
2454904
FIGURE 7: LEFT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB - OPEN HOLE HIGH
FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 1 OF 2)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  98 10 89

### Page 69

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
Refer to 747-
100/200/300 SRM
51-30-02 or 747-SP
SRM 51-30-02 as an
accepted procedure.
6-FastenersRemove1
(a)--Vertical Beam WebInspect2
(a)--Vertical Beam Outer
Chord
Inspect
(a) Do an open hole High Frequency Eddy Current (HFEC) inspection for any crack in accordance with 747
NDT Manual Part 6, Section 51-00-00, Procedure 1, Procedure 11 or Procedure 16.
FIGURE 7: LEFT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB – OPEN HOLE HIGH
FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
69 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 70 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
This Figure applies only to: Group 1, 4.
STA
260
STA
260
CANTED
- LBL 20
- LBL 10
- RBL 10
- RBL 22
2456072
FIGURE 8: RIGHT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB - OPEN HOLE HIGH
FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 1 OF 2)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  98 10 0L

### Page 71

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
Refer to 747-
100/200/300 SRM
51-30-02 or 747-SP
SRM 51-30-02 as an
accepted procedure.
6-FastenersRemove1
(a)--Vertical Beam WebInspect2
(a)--Vertical Beam Outer
Chord
Inspect
(a) Do an open hole High Frequency Eddy Current (HFEC) inspection for any crack in accordance with 747
NDT Manual Part 6, Section 51-00-00, Procedure 1, Procedure 11 or Procedure 16.
FIGURE 8: RIGHT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB – OPEN HOLE HIGH
FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
71 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 72 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
This Figure applies only to: Group 1.
STA
260
STA  *STA
CANTED STA  260  ¡ 280
340
RBL 22.  STA  340
RBL 10 -
LBL 10 -
LBL 22 -
FIGURE 9: LEFT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB - RIVET INSTALLATION
(SHEET 1 OF 2)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-53A2887
Work - See page 1 for details.  72 of 85

The text continues at https://openairdocs.org/service-documents/boeing/747-53a2887/file/1f0cd8aee6e2.md?from=73

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
