# Boeing Alert Service Bulletin 747-53A2887: No revision named, from page 73

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-8181; AD 2016-26-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 747-53A2887](https://openairdocs.org/service-documents/boeing/747-53a2887.md)
- Title as filed: SB BOEING-747-53A2887-00
- Pages: 85
- PDF: https://openairdocs.org/files/sha256/1f/0c/1f0cd8aee6e2a5bba22b89726972f9575ba3b698d482164d7c770238de91aea6
- Page: https://openairdocs.org/service-documents/boeing/747-53a2887/file/1f0cd8aee6e2

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 73

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a) (b)6BACR15ET9D OR
BACR15BB10AD
RivetInstall (New)1
(a) Refer to 747-100/200/300 SRM 51-30-02 or 747-SP SRM 51-30-02 as an accepted procedure.
(b) The same size fasteners can be used if the quality of the existing hole meets SRM requirements. The
maximum size of any new fastener is 0.312" diameter, maintain 1.5D minimum edge margin.
FIGURE 9: LEFT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB – RIVET INSTALLATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
73 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 74 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
This Figure applies only to: Group 1.
STA
260
STA
260
CANTED
STA
340  320  - LBL 22
— LBL 10
- RBL 10
RBL 22
2456080
FIGURE 10: RIGHT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB - RIVET INSTALLATION
(SHEET 1 OF 2)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  S810 AL

### Page 75

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a) (b)6BACR15ET9D OR
BACR15BB10AD
RivetInstall (New)1
(a) Refer to 747-100/200/300 SRM 51-30-02 or 747-SP SRM 51-30-02 as an accepted procedure.
(b) The same size fasteners can be used if the quality of the existing hole meets SRM requirements. The
maximum size of any new fastener is 0.312" diameter, maintain 1.5D minimum edge margin.
FIGURE 10: RIGHT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB – RIVET INSTALLATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
75 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 76 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
This Figure applies only to: Group 4.
STA
260
STA  ^ STA
CANTED STA  260  ¡ 280
340
RBL 22.  STA  340
RBL 10 -
LBL 10 -
LBL 22 ~
2454871
FIGURE 11: LEFT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB - BOLT INSTALLATION
(SHEET 1 OF 2)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  76 of 85

### Page 77

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a) (b) (c) (d)6BACB30MY6K6X OR
BACB30MY6K6Y
BoltInstall (New)1
(a) (b) (c) (d)6BACC30M6 OR
BACC30AC6
CollarInstall (New)
(a) BACB30MY6K6X bolt is to be installed with a BACC30M6 collar. BACB30MY6K6Y bolt is to be installed
with a BACC30AC6 collar.
(b) Kept or the same size fasteners can be used if the quality of the existing hole meets SRM requirements.
The maximum size of any new fastener is 0.312" diameter, maintain 1.5D minimum edge margin.
(c) Install wet with BMS 5-95 sealant. Refer to SOPM 20-50-19 as an accepted procedure.
(d) Refer to 747-100/200/300 SRM 51-30-02 as an accepted procedure.
FIGURE 11: LEFT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB – BOLT INSTALLATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
77 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 78 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
This Figure applies only to: Group 4.
STA
260
STA
260
CANTED
STA
340
STA
300
STA  STA
340  320  LBL 22
-LBL 10
- RBL 10
- RBL 22
2456077
FIGURE 12: RIGHT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB - BOLT INSTALLATION
(SHEET 1 OF 2)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  98 10 82

### Page 79

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a) (b) (c) (d)6BACB30MY6K6X OR
BACB30MY6K6Y
BoltInstall (New)1
(a) (b) (c) (d)6BACC30M6 OR
BACC30AC6
CollarInstall (New)
(a) BACB30MY6K6X bolt is to be installed with a BACC30M6 collar. BACB30MY6K6Y bolt is to be installed
with a BACC30AC6 collar.
(b) Kept or the same size fasteners can be used if the quality of the existing hole meets SRM requirements.
The maximum size of any new fastener is 0.312" diameter, maintain 1.5D minimum edge margin.
(c) Install wet with BMS 5-95 sealant. Refer to SOPM 20-50-19 as an accepted procedure.
(d) Refer to 747-100/200/300 SRM 51-30-02 as an accepted procedure.
FIGURE 12: RIGHT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB – BOLT INSTALLATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
79 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 80

This Appendix applies only to: Group 1, 4.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
MODIFICATION.PART 1
NOSE WHEEL WELL BODY STRUCTURE DETAILED INSPECTION.PART 2
STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB SURFACE OR
OPEN HOLE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION.
PART 3
SECONDARY INSPECTION AND REPAIR.PART 4
ANY CRACK FOUND during PART 2.CONDITION 1
NO CRACK FOUND during PART 2.CONDITION 2
SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
DONE. ANY CRACK FOUND during PART 3.
CONDITION 3
SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
DONE. NO CRACK FOUND during PART 3.
CONDITION 4
OPEN HOLE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
DONE. ANY CRACK FOUND during PART 3.
CONDITION 5
OPEN HOLE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
DONE. NO CRACK FOUND during PART 3.
CONDITION 6
APPENDIX A:  LOGIC DIAGRAM FOR TABLE 1 - MODIFICATION AND INSPECTION
(SHEET 1 OF 4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
80 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 81

APPENDIX A:  LOGIC DIAGRAM FOR TABLE 1 - MODIFICATION AND INSPECTION
(SHEET 2 OF 4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
81 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 82 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
WHICHEVER OCCURS LATER
WITHIN 12
BEFORE  WITHIN 3,000  MONTHS AFTER
25,000 TOTAL  FLIGHT CYCLES  THE ORIGINAL
FLIGHT  AFTER THE PART  ISSUE DATE OF
CYCLES  1 MODIFICATION  THIS SERVICE
BULLETIN
DO PART 2
CONDITION 1  CONDITION 2
NOT TO EXCEED
BEFORE FURTHER  3,000 FLIGHT
FLIGHT  CYCLES
REPEAT PART 2 AT
DO PART 4  UNREPAIRED AREAS ONLY
NOT TO EXCEED 3,000
FLIGHT CYCLES
REPEAT PART 2 AT
UNREPAIRED AREAS ONLY  2459396
APPENDIX A: LOGIC DIAGRAM FOR TABLE 1 - MODIFICATION AND INSPECTION
(SHEET 3 OF 4)
Original Issue: December 02, 2015
Export Controlled ECCN: 9E991 - BOEING  747-53A2887
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  82 of 85

### Page 83 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
WHICHEVER OCCURS LATER
WITHIN 2,200 FLIGHT
BEFORE 30,000 TOTAL  FLIGHT CYCLES  CYCLES AFTER THE  ORIGINAL ISSUE DATE  OF THIS SERVICE
BULLETIN
DO PART 3
CONDITION 3  CONDITION 4  CONDITION 5  CONDITION 6
BEFORE FURTHER  NOT TO EXCEED 3,000  BEFORE FURTHER  BEFORE FURTHER
FLIGHT  FLIGHT CYCLES  FLIGHT  FLIGHT
DO PART 4  DO PART 4  INSTALL NEW
FASTENERS
NOT TO EXCEED 3,000
NOT TO EXCEED 6,000
FLIGHT CYCLES
FLIGHT CYCLES
REPEAT PART 3 AT
UNREPAIRED AREAS
ONLY  REPEAT PART 3 AT
UNREPAIRED AREAS
ONLY
2459997
APPENDIX A: LOGIC DIAGRAM FOR TABLE 1 - MODIFICATION AND INSPECTION
(SHEET 4 OF 4)
Original Issue: December 02, 2015
PROPRIETARY - Copyright ® Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2887
Work - See page 1 for details.  83 of 85

### Page 84

This Appendix applies only to: Group 2-3, 5-6.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
NOSE WHEEL WELL BODY STRUCTURE DETAILED INSPECTION.PART 2
SECONDARY INSPECTION AND REPAIR.PART 4
ANY CRACK FOUND during PART 2.CONDITION 1
NO CRACK FOUND during PART 2.CONDITION 2
APPENDIX B:  LOGIC DIAGRAM FOR TABLE 2 - DETAILED INSPECTION
(SHEET 1 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 02, 2015
747-53A2887
84 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT

### Page 85 (OCR)

BOEING SERVICE BULLETIN 747-53A2887
ALERT  ALERT
WHICHEVER OCCURS LATER
WITHIN 3,000 FLIGHT
BEFORE 25,000 TOTAL  CYCLES AFTER THE
FLIGHT CYCLES  ORIGINAL ISSUE DATE
OF THIS SERVICE
BULLETIN
DO PART 2Ù
CONDITION 1  CONDITION 2
BEFORE FURTHER  NOT TO EXCEED
FLIGHT  3,000 FLIGHT
CYCLES
DO PART 4  REPEAT
PART 2
NOT TO EXCEED
3,000 FLIGHT
CYCLES
REPEAT PART 2 AT UNREPAIRED AREAS
ONLY
2459406
APPENDIX B: LOGIC DIAGRAM FOR TABLE 2 - DETAILED INSPECTION
(SHEET 2 OF 2)
Original Issue: December 02, 2015
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  Work - See page 1 for details.  747-53A2887  85 of 85

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
