# Boeing Alert Requirements Bulletin 747-53A2904 RB: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2021-0376; AD 2021-17-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Requirements Bulletin 747-53A2904 RB](https://openairdocs.org/service-documents/boeing/747-53a2904-rb.md)
- Title as filed: 747-53A2904 RB
- Pages: 561
- PDF: https://openairdocs.org/files/sha256/d6/e6/d6e60aa1ffa56aab53471e04c24b8331e51e08e745e100643df7fb3f6670c6db
- Page: https://openairdocs.org/service-documents/boeing/747-53a2904-rb/file/d6e60aa1ffa5

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
747
Requirements Bulletin
ALERT
Number: 747-53A2904 RB
Original Issue: December 16, 2020
ATA System: 5312
SUBJECT: FUSELAGE - Center Section - STA 1000 Front Spar Shear Tie and Intercostal Lug
Fitting Inspection and Repair
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2020 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: December 16, 2020
747-53A2904 RB
1 of 561
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
2 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
1. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
A. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
B. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
A. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
B. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
FIGURE 1: LEFT SIDE - STA 1000 FRONT SPAR - SHEAR TIE AND INTERCOSTAL LUG FITTING -
DETAILED INSPECTION AND SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC)
INSPECTION [Group 1-2, Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . 43
FIGURE 2: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - REMOVAL  [Group 2,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
FIGURE 3: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - INSTALLATION  [Group 2,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
FIGURE 4: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 INTERCOSTAL LUG FITTING - REMOVAL
[Group 2, Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
FIGURE 5: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 INTERCOSTAL LUG FITTING -
INSTALLATION [Group 2, Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . 67
FIGURE 6: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE AND INTERCOSTAL LUG
FITTING - REMOVAL [Group 2, Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . 74
FIGURE 7: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE AND INTERCOSTAL LUG
FITTING - INSTALLATION [Group 2, Configuration 2] . . . . . . . . . . . . . . . . . . . . 80
FIGURE 8: LEFT SIDE - STA 1000 FRONT SPAR - LBL 33.99 SHEAR TIE - REMOVAL  [Group 2,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
FIGURE 9: LEFT SIDE - STA 1000 FRONT SPAR - LBL 33.99 SHEAR TIE - INSTALLATION  [Group 2,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
FIGURE 10: LEFT SIDE - STA 1000 FRONT SPAR - LBL 57.50 SHEAR TIE - REMOVAL  [Group 2,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
FIGURE 11: LEFT SIDE - STA 1000 FRONT SPAR - LBL 57.50 SHEAR TIE - INSTALLATION  [Group 2,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
FIGURE 12: LEFT SIDE - STA 1000 FRONT SPAR - LBL 75.92 SHEAR TIE - REMOVAL  [Group 2,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
FIGURE 13: LEFT SIDE - STA 1000 FRONT SPAR - LBL 75.92 SHEAR TIE - INSTALLATION  [Group 2,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
FIGURE 14: RIGHT SIDE - STA 1000 FRONT SPAR - SHEAR TIE AND INTERCOSTAL LUG FITTING -
DETAILED INSPECTION AND SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC)
INSPECTION [Group 1-2, Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . 131
FIGURE 15: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 11.33 SHEAR TIE - REMOVAL  [Group 2,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
FIGURE 16: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 11.33 SHEAR TIE - INSTALLATION  [Group 2,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
FIGURE 17: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 11.33 INTERCOSTAL LUG FITTING - REMOVAL
[Group 2, Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
FIGURE 18: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 11.33 INTERCOSTAL LUG FITTING -
INSTALLATION [Group 2, Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . 155
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
3 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 4

FIGURE 19: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 11.33 SHEAR TIE AND INTERCOSTAL LUG
FITTING - REMOVAL [Group 2, Configuration 2] . . . . . . . . . . . . . . . . . . . . . . 162
FIGURE 20: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 11.33 SHEAR TIE AND INTERCOSTAL LUG
FITTING - INSTALLATION [Group 2, Configuration 2] . . . . . . . . . . . . . . . . . . . 168
FIGURE 21: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 33.99 SHEAR TIE - REMOVAL  [Group 2,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
FIGURE 22: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 33.99 SHEAR TIE - INSTALLATION  [Group 2,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
FIGURE 23: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 57.50 SHEAR TIE - REMOVAL  [Group 2,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
FIGURE 24: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 57.50 SHEAR TIE - INSTALLATION  [Group 2,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
FIGURE 25: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 75.92 SHEAR TIE - REMOVAL  [Group 2,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
FIGURE 26: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 75.92 SHEAR TIE - INSTALLATION  [Group 2,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
FIGURE 27: LEFT SIDE - STA 1000 FRONT SPAR - SHEAR TIE AND INTERCOSTAL LUG FITTING -
DETAILED INSPECTION AND SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC)
INSPECTION [Group 3, Configuration 1, 3] . . . . . . . . . . . . . . . . . . . . . . . . . 219
FIGURE 28: LEFT SIDE - STA 1000 FRONT SPAR - SHEAR TIE AND INTERCOSTAL LUG FITTING -
DETAILED INSPECTION AND SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC)
INSPECTION [Group 3, Configuration 2, 4] . . . . . . . . . . . . . . . . . . . . . . . . . 226
FIGURE 29: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - REMOVAL  [Group 3,
Configuration 1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
FIGURE 30: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - INSTALLATION  [Group 3,
Configuration 1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
FIGURE 31: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - REMOVAL  [Group 3,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
FIGURE 32: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - INSTALLATION  [Group 3,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
FIGURE 33: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 INTERCOSTAL LUG FITTING - REMOVAL
[Group 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
FIGURE 34: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 INTERCOSTAL LUG FITTING -
INSTALLATION [Group 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262
FIGURE 35: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE AND INTERCOSTAL LUG
FITTING - REMOVAL [Group 3, Configuration 1] . . . . . . . . . . . . . . . . . . . . . . 269
FIGURE 36: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE AND INTERCOSTAL LUG
FITTING - INSTALLATION [Group 3, Configuration 1] . . . . . . . . . . . . . . . . . . . 275
FIGURE 37: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE AND INTERCOSTAL LUG
FITTING - REMOVAL [Group 3, Configuration 2] . . . . . . . . . . . . . . . . . . . . . . 284
FIGURE 38: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE AND INTERCOSTAL LUG
FITTING - INSTALLATION [Group 3, Configuration 2] . . . . . . . . . . . . . . . . . . . 291
FIGURE 39: LEFT SIDE - STA 1000 FRONT SPAR - LBL 33.99 SHEAR TIE - REMOVAL  [Group 3,
Configuration 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
FIGURE 40: LEFT SIDE - STA 1000 FRONT SPAR - LBL 33.99 SHEAR TIE - INSTALLATION  [Group 3,
Configuration 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306
FIGURE 41: LEFT SIDE - STA 1000 FRONT SPAR - LBL 33.99 SHEAR TIE - REMOVAL  [Group 3,
Configuration 4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315
FIGURE 42: LEFT SIDE - STA 1000 FRONT SPAR - LBL 33.99 SHEAR TIE - INSTALLATION  [Group 3,
Configuration 4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
4 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 5

FIGURE 43: LEFT SIDE - STA 1000 FRONT SPAR - LBL 57.50 SHEAR TIE - REMOVAL  [Group 3,
Configuration 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
FIGURE 44: LEFT SIDE - STA 1000 FRONT SPAR - LBL 57.50 SHEAR TIE - INSTALLATION  [Group 3,
Configuration 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
FIGURE 45: LEFT SIDE - STA 1000 FRONT SPAR - LBL 57.50 SHEAR TIE - REMOVAL  [Group 3,
Configuration 4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345
FIGURE 46: LEFT SIDE - STA 1000 FRONT SPAR - LBL 57.50 SHEAR TIE - INSTALLATION  [Group 3,
Configuration 4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
FIGURE 47: LEFT SIDE - STA 1000 FRONT SPAR - LBL 75.92 SHEAR TIE - REMOVAL  [Group 3,
Configuration 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360
FIGURE 48: LEFT SIDE - STA 1000 FRONT SPAR - LBL 75.92 SHEAR TIE - INSTALLATION  [Group 3,
Configuration 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366
FIGURE 49: LEFT SIDE - STA 1000 FRONT SPAR - LBL 75.92 SHEAR TIE - REMOVAL  [Group 3,
Configuration 4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375
FIGURE 50: LEFT SIDE - STA 1000 FRONT SPAR - LBL 75.92 SHEAR TIE - INSTALLATION  [Group 3,
Configuration 4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381
FIGURE 51: RIGHT SIDE - STA 1000 FRONT SPAR - SHEAR TIE AND INTERCOSTAL LUG FITTING -
DETAILED INSPECTION AND SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC)
INSPECTION [Group 3, Configuration 1, 3] . . . . . . . . . . . . . . . . . . . . . . . . . 390
FIGURE 52: RIGHT SIDE - STA 1000 FRONT SPAR - SHEAR TIE AND INTERCOSTAL LUG FITTING -
DETAILED INSPECTION AND SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC)
INSPECTION [Group 3, Configuration 2, 4-6] . . . . . . . . . . . . . . . . . . . . . . . . 397
FIGURE 53: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 11.33 SHEAR TIE - REMOVAL  [Group 3,
Configuration 1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404
FIGURE 54: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 11.33 SHEAR TIE - INSTALLATION  [Group 3,
Configuration 1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 409
FIGURE 55: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 11.33 SHEAR TIE - REMOVAL  [Group 3,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 416
FIGURE 56: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 11.33 SHEAR TIE - INSTALLATION  [Group 3,
Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421
FIGURE 57: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 11.33 INTERCOSTAL LUG FITTING - REMOVAL
[Group 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
FIGURE 58: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 11.33 INTERCOSTAL LUG FITTING -
INSTALLATION [Group 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
FIGURE 59: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 11.33 SHEAR TIE AND INTERCOSTAL LUG
FITTING - REMOVAL [Group 3, Configuration 1] . . . . . . . . . . . . . . . . . . . . . . 440
FIGURE 60: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 11.33 SHEAR TIE AND INTERCOSTAL LUG
FITTING - INSTALLATION [Group 3, Configuration 1] . . . . . . . . . . . . . . . . . . . 446
FIGURE 61: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 11.33 SHEAR TIE AND INTERCOSTAL LUG
FITTING - REMOVAL [Group 3, Configuration 2] . . . . . . . . . . . . . . . . . . . . . . 455
FIGURE 62: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 11.33 SHEAR TIE AND INTERCOSTAL LUG
FITTING - INSTALLATION [Group 3, Configuration 2] . . . . . . . . . . . . . . . . . . . 462
FIGURE 63: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 33.99 SHEAR TIE - REMOVAL  [Group 3,
Configuration 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471
FIGURE 64: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 33.99 SHEAR TIE - INSTALLATION  [Group 3,
Configuration 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477
FIGURE 65: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 33.99 SHEAR TIE - REMOVAL  [Group 3,
Configuration 4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 486
FIGURE 66: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 33.99 SHEAR TIE - INSTALLATION  [Group 3,
Configuration 4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
5 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 6

FIGURE 67: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 33.99 SHEAR TIE - REMOVAL  [Group 3,
Configuration 5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501
FIGURE 68: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 33.99 SHEAR TIE - INSTALLATION  [Group 3,
Configuration 5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 507
FIGURE 69: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 57.50 SHEAR TIE - REMOVAL  [Group 3,
Configuration 4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 516
FIGURE 70: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 57.50 SHEAR TIE - INSTALLATION  [Group 3,
Configuration 4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 522
FIGURE 71: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 57.50 SHEAR TIE - REMOVAL  [Group 3,
Configuration 6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531
FIGURE 72: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 57.50 SHEAR TIE - INSTALLATION  [Group 3,
Configuration 6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 538
FIGURE 73: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 75.92 SHEAR TIE - REMOVAL  [Group 3,
Configuration 4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 547
FIGURE 74: RIGHT SIDE - STA 1000 FRONT SPAR - RBL 75.92 SHEAR TIE - INSTALLATION  [Group 3,
Configuration 4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 553
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
6 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 7

Commercial 
Airplanes
747
Requirements Bulletin
ALERT
Number: 747-53A2904 RB
Original Issue: December 16, 2020
ATA System: 5312
SUBJECT: FUSELAGE - Center Section - STA 1000 Front Spar Shear Tie and Intercostal Lug
Fitting Inspection and Repair
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING
PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN
(RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL
TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB
WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
1. Effectivity
A. Airplanes
This bulletin is applicable to 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F,
747-300, 747-400, 747-400D, 747-400F, 747SP, 747SR Airplane(s), line number(s) 1-1419 in 3
Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane
applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through
9 inclusive.
The Variable Numbers and Group Information for the applicable airplanes is given below.
DESCRIPTIONCONFIGURATIONGROUP
All 747-100/-100B/-100B SUD/-200B/-200C/-200F/-300/747SP/747SR
aiplanes.
- 1
Airplanes without a main deck side cargo door or nose cargo door.1
Airplanes with a main deck side cargo door or nose cargo door.2
All 747-400/-400D/-400F airplanes.- 2
Airplanes without a main deck side cargo door.1
Airplanes with a main deck side cargo door.2
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
7 of 561

### Page 8

DESCRIPTIONCONFIGURATIONGROUP
All 747-400 airplanes modified to 747-400 Boeing Converted Freighter
(BCF).
- 3
Airplanes with a standoff installed on the shear tie at BL 11.33 and
no support angle.
1
Airplanes with a support angle installed on the shear tie at BL 11.33
and no standoff.
2
Airplanes with a standoff installed on the shear tie at BL 33.99, or BL
57.50, or BL 75.92.
3
Airplanes with no standoff installed on the shear tie at BL 33.99, or
BL 57.50, or BL 75.92.
4
Airplanes with a water bracket installed on the shear tie at RBL 33.99.5
Airplanes with a support angle installed on the shear tie at RBL 57.50.6
Airplane Models:
747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D,
747-400F, 747SP, 747SR
GroupVariable Number
1RA001 - RA034
1RA101 - RA115
1RA161 - RA164
1RA201 - RA203
1RA216 - RA217
1RA245 - RA246
1RA251 - RA266
1RA301 - RA318
1RA351 - RA360
1RA369 - RA373
1RA401 - RA418
1RA501 - RA502
1RA521 - RA528
1RA532 - RA548
GroupVariable Number
1RA551 - RA552
1RA559 - RA561
1RA581 - RA582
1RA585
1RA601 - RA602
1RA631 - RA635
1RA651 - RA652
1RA671 - RA677
1RA701 - RA702
1RA721 - RA731
1RA741 - RA745
1RA749 - RA750
1RA761 - RA762
1RA781 - RA784
GroupVariable Number
1RA901 - RA916
1RB001 - RB016
1RB041 - RB044
1RB071 - RB075
1RB101 - RB102
1RB411 - RB413
1RB421
1RB601 - RB607
1RB681 - RB697
1RB711
1RB721 - RB723
1RB741 - RB748
1RD001 - RD004
1RD021 - RD022
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
8 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 9

GroupVariable Number
1RD041 - RD059
1RD071 - RD072
1RD081 - RD083
1RD091 - RD092
1RD101 - RD104
1RD121 - RD127
1RD131 - RD144
1RD166 - RD167
1RD171 - RD172
1RD181 - RD183
1RD201 - RD204
1RD221 - RD227
1RD231 - RD235
1RD241 - RD243
1RD251 - RD262
1RD271 - RD272
1RD291 - RD292
1RD301 - RD302
1RD311
1RD351 - RD358
1RD361 - RD366
1RD381 - RD383
1RD411 - RD414
1RD421 - RD426
1RD431 - RD435
1RD441 - RD442
1RD451 - RD456
1RD461
1RD471 - RD475
1RD513 - RD519
1RD531 - RD533
1RD551
1RD561
GroupVariable Number
1RD571
1RD581 - RD583
1RD591 - RD593
1RD601 - RD607
1RD621 - RD623
1RD641 - RD649
1RD651 - RD659
1RD661
1RD671
1RD681 - RD682
1RD691 - RD692
1RD701 - RD702
1RD721 - RD722
1RD741 - RD742
1RD751 - RD755
1RD761
1RD771 - RD775
1RD781 - RD783
1RD791 - RD792
1RE001
2RF001 - RF006
1RG001 - RG009
1RG091
1RG095
1RG101 - RG104
1RG121 - RG126
1RG141 - RG142
1RG161 - RG164
1RG171 - RG174
1RG191 - RG193
1RG211 - RG213
1RG221 - RG222
1RH101 - RH102
GroupVariable Number
1RH111 - RH112
1RH121 - RH122
1RJ131 - RJ133
1RJ151 - RJ152
1RJ301 - RJ303
1RJ321 - RJ322
1RJ331 - RJ333
2RL401 - RL403
2RL411 - RL436
2RL451 - RL456
2RL461 - RL462
2RL471 - RL481
2RL491 - RL492
2RL501 - RL502
2RL511 - RL516
2RL521 - RL522
2RL531 - RL534
2RL551
2RL561 - RL568
2RL571 - RL572
2RL576 - RL577
2RL579
2RL581 - RL586
2RL651 - RL655
2RL671 - RL675
2RL681 - RL684
2RL751 - RL752
2RM001 - RM007
2RM010 - RM013
2RM021 - RM024
2RM026 - RM030
2RM036 - RM045
2RM051 - RM053
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
9 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 10

GroupVariable Number
2RM071
2RM081 - RM084
2RM091
2RM096 - RM097
2RM116 - RM117
2RM126 - RM127
3RM128
2RM129 - RM132
2RM136 - RM147
2RM156 - RM158
2RM166 - RM177
2RM191 - RM192
2RM231 - RM233
2RM241 - RM246
2RM261 - RM264
2RM316 - RM318
2RM331 - RM333
2RM341
2RM351 - RM355
2RM366 - RM367
2RM401 - RM403
2RM426
2RM431
2RM441 - RM443
2RM445
2RM801 - RM803
2RM811 - RM813
2RM851 - RM859
2RM861 - RM863
2RM871 - RM899
2RM901 - RM906
2RM911
1RR001 - RR005
GroupVariable Number
1RR021 - RR025
1RR031
1RR201 - RR206
1RR221 - RR226
1RR261 - RR267
1RR301 - RR310
1RR331 - RR332
1RR336
1RR341 - RR345
1RR361 - RR362
1RR421 - RR422
1RR431 - RR432
1RR441 - RR442
1RR451
1RR501 - RR504
1RR521 - RR522
1RR526
1RR531
1RR551 - RR556
1RR561
1RR566
2RR701
2RR721 - RR724
2RR746 - RR748
2RR851 - RR856
2RR861 - RR862
2RR951 - RR952
1RS001 - RS002
1RS201
1RS211 - RS212
1RS221 - RS222
1RS231 - RS241
1RS251 - RS259
GroupVariable Number
1RS263
1RS265 - RS268
1RS271 - RS276
1RS291 - RS292
1RS301 - RS306
1RS311 - RS320
1RS331 - RS333
1RS341 - RS342
1RS699
1RS701 - RS703
1RS711 - RS713
1RS721 - RS722
1RS731 - RS732
1RS741 - RS743
1RS751 - RS752
1RS761 - RS762
1RS771
1RS781 - RS782
1RS786
2RT001 - RT014
3RT021 - RT022
3RT031 - RT033
2RT034 - RT035
2RT041 - RT047
3RT061
3RT071 - RT072
2RT073 - RT074
3RT075
2RT101 - RT103
2RT121
2RT131 - RT137
2RT151 - RT152
3RT161
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
10 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 11

GroupVariable Number
2RT162 - RT163
3RT164
2RT165 - RT168
2RT401 - RT412
2RT431 - RT447
2RT451 - RT455
3RT456
2RT457 - RT460
3RT461
2RT462 - RT469
2RT471 - RT499
3RT501
2RT502 - RT505
3RT506 - RT510
2RT511 - RT512
3RT513
2RT514 - RT515
3RT516
2RT517
3RT518 - RT520
2RT521 - RT523
3RT524
2RT525
3RT526
GroupVariable Number
2RT527
3RT528
2RT529
3RT530
2RT531 - RT535
2RT551 - RT568
2RT571
3RT572 - RT579
2RT580 - RT591
2RT601 - RT641
3RT642
2RT643 - RT653
3RT654 - RT657
2RT671 - RT673
2RT681 - RT682
3RT691 - RT692
2RT693 - RT699
2RT701 - RT704
2RT711 - RT717
2RT741 - RT750
3RT751 - RT752
2RT753 - RT757
2RT776 - RT777
3RT781 - RT782
GroupVariable Number
2RT783 - RT784
2RT801 - RT803
2RT811 - RT814
2RT831 - RT836
3RT837
2RT861 - RT864
2RT876 - RT880
2RT931 - RT932
2RT945 - RT949
2RT951 - RT955
2RT966
3RT967
2RU001 - RU006
2RU016 - RU017
2RU031 - RU032
2RU051 - RU052
2RU059 - RU062
2RU081 - RU083
2RU101 - RU102
2RU121 - RU132
2RU801 - RU809
2RU831 - RU841
--
--
B. Spares Affected
None.
2. CONCURRENT REQUIREMENTS
None.
3. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
Requirements Bulletin 747-53A2904 RB. The Airworthiness Directive will make the compliance tasks and
times given in Requirements Bulletin 747-53A2904 RB mandatory.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
11 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 12

Accomplish the required actions, based on the applicable conditions in Tables 1 through 6, in accordance
with Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Group 1-2, Configuration 1:
No further action required.
Group 1, Configuration 2:
Table 1: Detailed Inspection and Surface High Frequency Eddy Current (HFEC) Inspection of the STA
1000 Front Spar Shear Tie at Left Buttock Line (LBL) 11.33, LBL 33.99, LBL 57.50, LBL 75.92, and Inter-
costal Lug Fitting at LBL 11.33
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,900
flight cycles after
the Original Is-
sue date of Re-
quirements Bul-
letin 747-
53A2904 RB.
Before 6,000
total flight cy-
cles.
Do a detailed inspection and
surface HFEC inspection of
the STA 1000 front spar shear
tie at LBL 11.33, LBL 33.99,
LBL 57.50, LBL 75.92, and in-
tercostal lug fitting at LBL
11.33 for any crack.
All airplanes.
-Before further flight.CONDITION 1 (ACTION 1):CONDITION 1:
Contact The Boeing Company
for repair instructions and do
the repair.
ANY CRACK FOUND ON
THE FRONT SPAR
SHEAR TIE AT LBL 11.33,
LBL 33.99, LBL 57.50, LBL
75.92, OR INTERCOSTAL
LUG FITTING AT LBL
11.33.
2,100 flight cy-
cles.
-CONDITION 1 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
2,100 flight cy-
cles.
-Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
CONDITION 2:
NO CRACK FOUND ON
THE FRONT SPAR
SHEAR TIE AT LBL 11.33,
LBL 33.99, LBL 57.50, LBL
75.92, OR INTERCOSTAL
LUG FITTING AT LBL
11.33.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
12 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 13

Group 1, Configuration 2:
Table 2: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,900
flight cycles after
the Original Is-
sue date of Re-
quirements Bul-
letin 747-
53A2904 RB.
Before 6,000
total flight cy-
cles.
Do a detailed inspection and
surface HFEC inspection of
the STA 1000 front spar shear
tie at RBL 11.33, RBL 33.99,
RBL 57.50, RBL 75.92, and
intercostal lug fitting at RBL
11.33 for any crack.
All airplanes.
-Before further flight.CONDITION 3 (ACTION 1):CONDITION 3:
Contact The Boeing Company
for repair instructions and do
the repair.
ANY CRACK FOUND ON
THE FRONT SPAR
SHEAR TIE AT RBL 11.33,
RBL 33.99, RBL 57.50,
RBL 75.92, OR INTER-
COSTAL LUG FITTING AT
RBL 11.33.
2,100 flight cy-
cles.
-CONDITION 3 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
2,100 flight cy-
cles.
-Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
CONDITION 4:
NO CRACK FOUND ON
THE FRONT SPAR
SHEAR TIE AT RBL 11.33,
RBL 33.99, RBL 57.50,
RBL 75.92, OR INTER-
COSTAL LUG FITTING AT
RBL 11.33.
Group 2, Configuration 2:
Table 3: Detailed Inspection and Surface High Frequency Eddy Current (HFEC) Inspection of the STA
1000 Front Spar Shear Tie at Left Buttock Line (LBL) 11.33, LBL 33.99, LBL 57.50, LBL 75.92, and Inter-
costal Lug Fitting at LBL 11.33
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,900
flight cycles after
the Original Is-
sue date of Re-
quirements Bul-
letin 747-
53A2904 RB.
Before 6,000
total flight cy-
cles.
Do a detailed inspection and
surface HFEC inspection of
the STA 1000 front spar shear
tie at LBL 11.33, LBL 33.99,
LBL 57.50, LBL 75.92, and in-
tercostal lug fitting at LBL
11.33 for any crack.
All airplanes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
13 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 14

Group 2, Configuration 2:
Table 3: Detailed Inspection and Surface High Frequency Eddy Current (HFEC) Inspection of the STA
1000 Front Spar Shear Tie at Left Buttock Line (LBL) 11.33, LBL 33.99, LBL 57.50, LBL 75.92, and Inter-
costal Lug Fitting at LBL 11.33
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 5 (ACTION 1):CONDITION 5:
Install a new front spar shear
tie at affected location.
ANY CRACK FOUND ON
THE LBL 11.33 FRONT
SPAR SHEAR TIE AND
NOT ON THE LBL 11.33
INTERCOSTAL LUG FIT-
TING.
2,100 flight cy-
cles.
-CONDITION 5 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
-Before further flight.CONDITION 6 (ACTION 1):CONDITION 6:
Install a new intercostal lug
fitting.
ANY CRACK FOUND ON
THE LBL 11.33 INTER-
COSTAL LUG FITTING
AND NOT ON THE LBL
11.33 FRONT SPAR
SHEAR TIE.
2,100 flight cy-
cles.
-CONDITION 6 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
-Before further flight.CONDITION 7 (ACTION 1):CONDITION 7:
Install a new front spar shear
tie and intercostal lug fitting.
ANY CRACK FOUND ON
THE LBL 11.33 FRONT
SPAR SHEAR TIE AND
LBL 11.33 INTERCOSTAL
LUG FITTING.
2,100 flight cy-
cles.
-CONDITION 7 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
14 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 15

Group 2, Configuration 2:
Table 3: Detailed Inspection and Surface High Frequency Eddy Current (HFEC) Inspection of the STA
1000 Front Spar Shear Tie at Left Buttock Line (LBL) 11.33, LBL 33.99, LBL 57.50, LBL 75.92, and Inter-
costal Lug Fitting at LBL 11.33
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 8 (ACTION 1):CONDITION 8:
Install a new front spar shear
tie at affected location.
ANY CRACK FOUND ON
THE LBL 33.99, OR LBL
57.50, OR LBL 75.92
FRONT SPAR SHEAR
TIE.
2,100 flight cy-
cles.
-CONDITION 8 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
2,100 flight cy-
cles.
-Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
CONDITION 9:
NO CRACK FOUND ON
THE FRONT SPAR
SHEAR TIE AT LBL 11.33,
LBL 33.99, LBL 57.50, LBL
75.92 OR INTERCOSTAL
LUG FITTING AT LBL
11.33.
Group 2, Configuration 2:
Table 4: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,900
flight cycles after
the Original Is-
sue date of Re-
quirements Bul-
letin 747-
53A2904 RB.
Before 6,000
total flight cy-
cles.
Do a detailed inspection and
surface HFEC inspection of
the STA 1000 front spar shear
tie at RBL 11.33, RBL 33.99,
RBL 57.50, RBL 75.92, and
intercostal lug fitting at RBL
11.33 for any crack.
All airplanes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
15 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 16

Group 2, Configuration 2:
Table 4: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 10 (ACTION 1):CONDITION 10:
Install a new front spar shear
tie at affected location.
ANY CRACK FOUND ON
THE RBL 11.33 FRONT
SPAR SHEAR TIE AND
NOT ON THE RBL 11.33
INTERCOSTAL LUG FIT-
TING.
2,100 flight cy-
cles.
-CONDITION 10 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
-Before further flight.CONDITION 11 (ACTION 1):CONDITION 11:
Install a new intercostal lug
fitting.
ANY CRACK FOUND ON
THE RBL 11.33 INTER-
COSTAL LUG FITTING
AND NOT ON THE RBL
11.33 FRONT SPAR
SHEAR TIE.
2,100 flight cy-
cles.
-CONDITION 11 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
-Before further flight.CONDITION 12 (ACTION 1):CONDITION 12:
Install a new front spar shear
tie and intercostal lug fitting.
ANY CRACK FOUND ON
THE RBL 11.33 FRONT
SPAR SHEAR TIE AND
RBL 11.33 INTERCOSTAL
LUG FITTING.
2,100 flight cy-
cles.
-CONDITION 12 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
16 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 17

Group 2, Configuration 2:
Table 4: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 13 (ACTION 1):CONDITION 13:
Install a new front spar shear
tie at affected location.
ANY CRACK FOUND ON
THE RBL 33.99, OR RBL
57.50, OR RBL 75.92
FRONT SPAR SHEAR
TIE.
2,100 flight cy-
cles.
-CONDITION 13 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
2,100 flight cy-
cles.
-Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
CONDITION 14:
NO CRACK FOUND ON
THE FRONT SPAR
SHEAR TIE AT RBL 11.33,
RBL 33.99, RBL 57.50,
RBL 75.92 OR INTER-
COSTAL LUG FITTING AT
RBL 11.33.
Group 3:
Table 5: Detailed Inspection and Surface High Frequency Eddy Current (HFEC) Inspection of the STA
1000 Front Spar Shear Tie at Left Buttock Line (LBL) 11.33, LBL 33.99, LBL 57.50, LBL 75.92, and Inter-
costal Lug Fitting at LBL 11.33
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,900
flight cycles after
the Original Is-
sue date of Re-
quirements Bul-
letin 747-
53A2904 RB.
Within 6,000
flight cycles
after Boeing
Converted
Freighter
modification.
Do a detailed inspection and
surface HFEC inspection of
the STA 1000 front spar shear
tie at LBL 11.33, LBL 33.99,
LBL 57.50, LBL 75.92, and in-
tercostal lug fitting at LBL
11.33 for any crack.
All airplanes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
17 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 18

Group 3:
Table 5: Detailed Inspection and Surface High Frequency Eddy Current (HFEC) Inspection of the STA
1000 Front Spar Shear Tie at Left Buttock Line (LBL) 11.33, LBL 33.99, LBL 57.50, LBL 75.92, and Inter-
costal Lug Fitting at LBL 11.33
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 5 (ACTION 1):CONDITION 5:
Install a new front spar shear
tie at affected location.
ANY CRACK FOUND ON
THE LBL 11.33 FRONT
SPAR SHEAR TIE AND
NOT ON THE LBL 11.33
INTERCOSTAL LUG FIT-
TING.
2,100 flight cy-
cles.
-CONDITION 5 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
-Before further flight.CONDITION 6 (ACTION 1):CONDITION 6:
Install a new intercostal lug
fitting.
ANY CRACK FOUND ON
THE LBL 11.33 INTER-
COSTAL LUG FITTING
AND NOT ON THE LBL
11.33 FRONT SPAR
SHEAR TIE.
2,100 flight cy-
cles.
-CONDITION 6 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
-Before further flight.CONDITION 7 (ACTION 1):CONDITION 7:
Install a new front spar shear
tie and intercostal lug fitting.
ANY CRACK FOUND ON
THE LBL 11.33 FRONT
SPAR SHEAR TIE AND
LBL 11.33 INTERCOSTAL
LUG FITTING.
2,100 flight cy-
cles.
-CONDITION 7 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
18 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 19

Group 3:
Table 5: Detailed Inspection and Surface High Frequency Eddy Current (HFEC) Inspection of the STA
1000 Front Spar Shear Tie at Left Buttock Line (LBL) 11.33, LBL 33.99, LBL 57.50, LBL 75.92, and Inter-
costal Lug Fitting at LBL 11.33
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 8 (ACTION 1):CONDITION 8:
Install a new front spar shear
tie at affected location.
ANY CRACK FOUND ON
THE LBL 33.99, OR LBL
57.50, OR LBL 75.92
FRONT SPAR SHEAR
TIE.
2,100 flight cy-
cles.
-CONDITION 8 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
2,100 flight cy-
cles.
-Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
CONDITION 9:
NO CRACK FOUND ON
THE FRONT SPAR
SHEAR TIE AT LBL 11.33,
LBL 33.99, LBL 57.50, LBL
75.92 OR INTERCOSTAL
LUG FITTING AT LBL
11.33.
Group 3:
Table 6: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,900
flight cycles after
the Original Is-
sue date of Re-
quirements Bul-
letin 747-
53A2904 RB.
Within 6,000
flight cycles
after Boeing
Converted
Freighter
modification.
Do a detailed inspection and
surface HFEC inspection of
the STA 1000 front spar shear
tie at RBL 11.33, RBL 33.99,
RBL 57.50, RBL 75.92, and
intercostal lug fitting at RBL
11.33 for any crack.
All airplanes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
19 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 20

Group 3:
Table 6: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 10 (ACTION 1):CONDITION 10:
Install a new front spar shear
tie at affected location.
ANY CRACK FOUND ON
THE RBL 11.33 FRONT
SPAR SHEAR TIE AND
NOT ON THE RBL 11.33
INTERCOSTAL LUG FIT-
TING.
2,100 flight cy-
cles.
-CONDITION 10 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
-Before further flight.CONDITION 11 (ACTION 1):CONDITION 11:
Install a new intercostal lug
fitting.
ANY CRACK FOUND ON
THE RBL 11.33 INTER-
COSTAL LUG FITTING
AND NOT ON THE RBL
11.33 FRONT SPAR
SHEAR TIE.
2,100 flight cy-
cles.
-CONDITION 11 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
-Before further flight.CONDITION 12 (ACTION 1):CONDITION 12:
Install a new front spar shear
tie and intercostal lug fitting.
ANY CRACK FOUND ON
THE RBL 11.33 FRONT
SPAR SHEAR TIE AND
RBL 11.33 INTERCOSTAL
LUG FITTING.
2,100 flight cy-
cles.
-CONDITION 12 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
20 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 21

Group 3:
Table 6: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 13 (ACTION 1):CONDITION 13:
Install a new front spar shear
tie at affected location.
ANY CRACK FOUND ON
THE RBL 33.99, OR RBL
57.50, OR RBL 75.92
FRONT SPAR SHEAR
TIE.
2,100 flight cy-
cles.
-CONDITION 13 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
2,100 flight cy-
cles.
-Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
CONDITION 14:
NO CRACK FOUND ON
THE FRONT SPAR
SHEAR TIE AT RBL 11.33,
RBL 33.99, RBL 57.50,
RBL 75.92 OR INTER-
COSTAL LUG FITTING AT
RBL 11.33.
4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
21 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 22

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
22 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT
BLANK PAGE

### Page 23

5.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. For the related SB, some locations are marked RC Start and RC
End to identify the requirements that are restated from the RB. For the related SB,
the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD.
Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations
to steps between RC Start and RC End, including substeps and identified figures.
For the related SB, the steps not between RC Start and RC End may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC; this is provided that the
steps between RC Start and RC End, including sub-steps and identified figures, can
still be done as specified, and the airplane can be put back in an airworthy condition.
Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. Boeing Service Letter 747-SL-51-048, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 747 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 747
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 747
Aircraft Maintenance Manual (AMM).
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
23 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 24

— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
7. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
8. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
9. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
10. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation or assembly to detect damage, failure or irregularity. This could include
tactile assessment in which a component or assembly can be checked for
tightness/security. Available lighting is normally supplemented with a direct source
of good lighting at an intensity deemed appropriate. Inspection aids such as mirrors
and magnifying lenses may be necessary. Surface cleaning and elaborate access
procedures may be required.
11. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION,
do all of the ACTION numbers for that CONDITION or OPTION.
12. The instructions in Work Instructions and the figures can include operation of tools
or test equipment. Boeing Engineering Tool Drawings, the Illustrated Tool and
Equipment Manual, and the Special Tool and Ground Handling Drawing Index contain
data on versions of the tools or test equipment that you can use. It is permitted to
use replaced tools. It is not permitted to use superseded tools.
13. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate
full threaded fasteners (screws) needed for installation in this service bulletin.
14. For fasteners that penetrate the fuel tank. Refer to 747-400F SRM 51-80-01 or
747-400SF SRM 51-80-01 as an accepted procedure.
B. WORK INSTRUCTIONS
Actions Required for Compliance
1. Requirements
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
24 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 25

Group 1-2, Configuration 1:
No further action required.
Group 1, Configuration 2:
Table 1: Detailed Inspection and Surface High Frequency Eddy Current (HFEC) Inspection of the STA
1000 Front Spar Shear Tie at Left Buttock Line (LBL) 11.33, LBL 33.99, LBL 57.50, LBL 75.92, and Inter-
costal Lug Fitting at LBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 1: GET
INSPECTION AC-
CESS.
-Do a detailed inspection and
surface HFEC inspection of
the STA 1000 front spar shear
tie at LBL 11.33, LBL 33.99,
LBL 57.50, LBL 75.92, and in-
tercostal lug fitting at LBL
11.33 for any crack.
All airplanes.
-FIGURE 1
Do PART 2: CLOSE
INSPECTION AC-
CESS.
-CONDITION 1 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 1:
ANY CRACK FOUND
ON THE FRONT SPAR
SHEAR TIE AT LBL
11.33, LBL 33.99, LBL
57.50, LBL 75.92, OR
INTERCOSTAL LUG
FITTING AT LBL11.33.
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 1 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
-FIGURE 1
Do PART 2: CLOSE
INSPECTION AC-
CESS.
--CONDITION 2:
NO CRACK FOUND
ON THE FRONT SPAR
SHEAR TIE AT LBL
11.33, LBL 33.99, LBL
57.50, LBL 75.92, OR
INTERCOSTAL LUG
FITTING AT LBL11.33.
Do PART 1: GET
INSPECTION AC-
CESS.
-Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
-FIGURE 1
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
25 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 26

Group 1, Configuration 2:
Table 2: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 1: GET
INSPECTION AC-
CESS.
-Do a detailed inspection and
surface HFEC inspection of
the STA 1000 front spar shear
tie at RBL 11.33, RBL 33.99,
RBL 57.50, RBL 75.92, and
intercostal lug fitting at RBL
11.33 for any crack.
All airplanes.
-FIGURE 14
Do PART 2: CLOSE
INSPECTION AC-
CESS.
-CONDITION 3 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 3:
ANY CRACK FOUND
ON THE FRONT SPAR
SHEAR TIE AT RBL
11.33, RBL 33.99, RBL
57.50, RBL 75.92, OR
INTERCOSTAL LUG
FITTING AT RBL11.33.
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 3 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
-FIGURE 14
Do PART 2: CLOSE
INSPECTION AC-
CESS.
--CONDITION 4:
NO CRACK FOUND
ON THE FRONT SPAR
SHEAR TIE AT RBL
11.33, RBL 33.99, RBL
57.50, RBL 75.92, OR
INTERCOSTAL LUG
FITTING AT RBL11.33.
Do PART 1: GET
INSPECTION AC-
CESS.
-Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
-FIGURE 14
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
26 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 27

Group 2, Configuration 2:
Table 3: Detailed Inspection and Surface High Frequency Eddy Current (HFEC) Inspection of the STA
1000 Front Spar Shear Tie at Left Buttock Line (LBL) 11.33, LBL 33.99, LBL 57.50, LBL 75.92, and Inter-
costal Lug Fitting at LBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 1: GET
INSPECTION AC-
CESS.
Do a detailed inspection and
surface HFEC inspection of
the STA 1000 front spar shear
tie at LBL 11.33, LBL 33.99,
LBL 57.50, LBL 75.92, and in-
tercostal lug fitting at LBL
11.33 for any crack.
All airplanes.
-FIGURE 1
Do PART 3: GET
REPAIR ACCESS.
-CONDITION 5 (ACTION 1):
Install a new front spar shear
tie at affected location.
CONDITION 5:
ANY CRACK FOUND
ON THE LBL 11.33
FRONT SPAR SHEAR
TIE AND NOT ON THE
LBL 11.33 INTER-
COSTAL LUG FIT-
TING.
-FIGURE 2 and FIGURE 3
Do PART 4: CLOSE
REPAIR ACCESS.
and
Do PART 2: CLOSE
INSPECTION AC-
CESS.
-
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 5 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
-FIGURE 1
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
27 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 28

Group 2, Configuration 2:
Table 3: Detailed Inspection and Surface High Frequency Eddy Current (HFEC) Inspection of the STA
1000 Front Spar Shear Tie at Left Buttock Line (LBL) 11.33, LBL 33.99, LBL 57.50, LBL 75.92, and Inter-
costal Lug Fitting at LBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 3: GET
REPAIR ACCESS.
-CONDITION 6 (ACTION 1):
Install a new front spar inter-
costal lug fitting.
CONDITION 6:
ANY CRACK FOUND
ON THE LBL 11.33 IN-
TERCOSTAL LUG FIT-
TING AND NOT ON
THE LBL 11.33 FRONT
SPAR SHEAR TIE.
-FIGURE 4 and FIGURE 5
Do PART 4: CLOSE
REPAIR ACCESS.
and
-
Do PART 2: CLOSE
INSPECTION AC-
CESS.
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 6 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
-FIGURE 1
Do PART 3: GET
REPAIR ACCESS.
-CONDITION 7 (ACTION 1):
Install a new front spar shear
tie and intercostal lug fitting.
CONDITION 7:
ANY CRACK FOUND
ON THE LBL 11.33
FRONT SPAR SHEAR
TIE AND LBL 11.33 IN-
TERCOSTAL LUG FIT-
TING.
-FIGURE 6 and FIGURE 7
Do PART 4: CLOSE
REPAIR ACCESS.
and
-
Do PART 2: CLOSE
INSPECTION AC-
CESS.
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 7 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
-FIGURE 1
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
28 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 29

Group 2, Configuration 2:
Table 3: Detailed Inspection and Surface High Frequency Eddy Current (HFEC) Inspection of the STA
1000 Front Spar Shear Tie at Left Buttock Line (LBL) 11.33, LBL 33.99, LBL 57.50, LBL 75.92, and Inter-
costal Lug Fitting at LBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 3: GET
REPAIR ACCESS.
-CONDITION 8 (ACTION 1):
Install a new front spar shear
tie at affected location.
CONDITION 8:
ANY CRACK FOUND
ON THE LBL 33.99,
OR LBL 57.50, OR LBL
75.92 FRONT SPAR
SHEAR TIE.
-FIGURE 8 and
FIGURE 9
LBL 33.99
-FIGURE 10 and
FIGURE 11
LBL 57.50
-FIGURE 12 and
FIGURE 13
LBL 75.92
Do PART 4: CLOSE
REPAIR ACCESS.
-
and
Do PART 2: CLOSE
INSPECTION AC-
CESS.
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 8 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
-FIGURE 1
PART 2: CLOSE IN-
SPECTION AC-
CESS.
--CONDITION 9:
NO CRACK FOUND
ON THE FRONT SPAR
SHEAR TIE AT LBL
11.33, LBL 33.99, LBL
57.50, LBL 75.92 OR
INTERCOSTAL LUG
FITTING AT LBL 11.33.
Do PART 1: GET
INSPECTION AC-
CESS.
-Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
-FIGURE 1
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
29 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 30

Group 2, Configuration 2:
Table 4: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 1: GET
INSPECTION AC-
CESS.
Do a detailed inspection and
surface HFEC inspection of
the STA 1000 front spar shear
tie at RBL 11.33, RBL 33.99,
RBL 57.50, RBL 75.92, and
intercostal lug fitting at RBL
11.33 for any crack.
All airplanes.
-FIGURE 14
Do PART 3: GET
REPAIR ACCESS.
-CONDITION 10 (ACTION 1):
Install a new front spar shear
tie at affected location.
CONDITION 10:
ANY CRACK FOUND
ON THE RBL 11.33
FRONT SPAR SHEAR
TIE AND NOT ON THE
RBL 11.33 INTER-
COSTAL LUG FIT-
TING.
-FIGURE 15 and FIGURE 16
Do PART 4: CLOSE
REPAIR ACCESS.
and
Do PART 2: CLOSE
INSPECTION AC-
CESS.
-
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 10 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
-FIGURE 14
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
30 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 31

Group 2, Configuration 2:
Table 4: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 3: GET
REPAIR ACCESS.
-CONDITION 11 (ACTION 1):
Install a new intercostal lug
fitting.
CONDITION 11:
ANY CRACK FOUND
ON THE RBL 11.33 IN-
TERCOSTAL LUG FIT-
TING AND NOT ON
THE RBL 11.33
FRONT SPAR SHEAR
TIE.
-FIGURE 17 and FIGURE 18
Do PART 4: CLOSE
REPAIR ACCESS.
and
Do PART 2: CLOSE
INSPECTION AC-
CESS.
-
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 11 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
-FIGURE 14
Do PART 3: GET
REPAIR ACCESS.
-CONDITION 12 (ACTION 1):
Install a new front spar shear
tie and intercostal lug fitting.
CONDITION 12:
ANY CRACK FOUND
ON THE RBL 11.33
FRONT SPAR SHEAR
TIE AND RBL 11.33
INTERCOSTAL LUG
FITTING.
-FIGURE 19 and FIGURE 20
Do PART 4: CLOSE
REPAIR ACCESS.
and
-
Do PART 2: CLOSE
INSPECTION AC-
CESS.
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 12 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
-FIGURE 14
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
31 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 32

Group 2, Configuration 2:
Table 4: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 3: GET
REPAIR ACCESS.
-CONDITION 13 (ACTION 1):
Install a new front spar shear
tie at affected location.
CONDITION 13:
ANY CRACK FOUND
ON THE RBL 33.99,
OR RBL 57.50, OR
RBL 75.92 FRONT
SPAR SHEAR TIE.
-FIGURE 21 and
FIGURE 22
RBL 33.99
-FIGURE 23 and
FIGURE 24
RBL 57.50
-FIGURE 25 and
FIGURE 26
RBL 75.92
Do PART 4: CLOSE
REPAIR ACCESS.
-
and
Do PART 2: CLOSE
INSPECTION AC-
CESS.
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 13 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
-FIGURE 14
PART 2: CLOSE IN-
SPECTION AC-
CESS.
--CONDITION 14:
NO CRACK FOUND
ON THE FRONT SPAR
SHEAR TIE AT RBL
11.33, RBL 33.99, RBL
57.50, RBL 75.92 OR
INTERCOSTAL LUG
FITTING AT RBL
11.33.
Do PART 1: GET
INSPECTION AC-
CESS.
-Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
-FIGURE 14
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
32 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 33

Group 3:
Table 5: Detailed Inspection and Surface High Frequency Eddy Current (HFEC) Inspection of the STA
1000 Front Spar Shear Tie at Left Buttock Line (LBL) 11.33, LBL 33.99, LBL 57.50, LBL 75.92, and Inter-
costal Lug Fitting at LBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 1: GET
INSPECTION AC-
CESS.
Do a detailed inspection and
surface HFEC inspection of
the STA 1000 front spar shear
tie at LBL 11.33, LBL 33.99,
LBL 57.50, LBL 75.92, and in-
tercostal lug fitting at LBL
11.33 for any crack.
All airplanes.
-Group 3, Configuration 1, 3:
FIGURE 27
-Group 3, Configuration 2, 4:
FIGURE 28
Do PART 5: GET
REPAIR ACCESS.
-CONDITION 5 (ACTION 1):
Install a new front spar shear
tie at affected location.
CONDITION 5:
ANY CRACK FOUND
ON THE LBL 11.33
FRONT SPAR SHEAR
TIE AND NOT ON THE
LBL 11.33 INTER-
COSTAL LUG FIT-
TING.
-Group 3, Configuration 1:
FIGURE 29 and FIGURE 30
-Group 3, Configuration 2:
FIGURE 31 and FIGURE 32
Do PART 6: CLOSE
REPAIR ACCESS.
-
and
Do PART 2: CLOSE
INSPECTION AC-
CESS.
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 5 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
-Group 3, Configuration 1, 3:
FIGURE 27
-Group 3, Configuration 2, 4:
FIGURE 28
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
33 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 34

Group 3:
Table 5: Detailed Inspection and Surface High Frequency Eddy Current (HFEC) Inspection of the STA
1000 Front Spar Shear Tie at Left Buttock Line (LBL) 11.33, LBL 33.99, LBL 57.50, LBL 75.92, and Inter-
costal Lug Fitting at LBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 5: GET
REPAIR ACCESS.
-CONDITION 6 (ACTION 1):
Install a new intercostal lug
fitting.
CONDITION 6:
ANY CRACK FOUND
ON THE LBL 11.33 IN-
TERCOSTAL LUG FIT-
TING AND NOT ON
THE LBL 11.33 FRONT
SPAR SHEAR TIE.
-FIGURE 33 and FIGURE 34
Do PART 6: CLOSE
REPAIR ACCESS.
and
-
Do PART 2: CLOSE
INSPECTION AC-
CESS.
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 6 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
-Group 3, Configuration 1, 3:
FIGURE 27
-Group 3, Configuration 2, 4:
FIGURE 28
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
34 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 35

Group 3:
Table 5: Detailed Inspection and Surface High Frequency Eddy Current (HFEC) Inspection of the STA
1000 Front Spar Shear Tie at Left Buttock Line (LBL) 11.33, LBL 33.99, LBL 57.50, LBL 75.92, and Inter-
costal Lug Fitting at LBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 5: GET
REPAIR ACCESS.
-CONDITION 7 (ACTION 1):
Install a new front spar shear
tie and intercostal lug fitting.
CONDITION 7:
ANY CRACK FOUND
ON THE LBL 11.33
FRONT SPAR SHEAR
TIE AND LBL 11.33 IN-
TERCOSTAL LUG FIT-
TING.
-Group 3, Configuration 1:
FIGURE 35 and FIGURE 36
-Group 3, Configuration 2:
FIGURE 37 and FIGURE 38
Do PART 6: CLOSE
REPAIR ACCESS.
-
and
Do PART 2: CLOSE
INSPECTION AC-
CESS.
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 7 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
-Group 3, Configuration 1, 3:
FIGURE 27
-Group 3, Configuration 2, 4:
FIGURE 28
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
35 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 36

Group 3:
Table 5: Detailed Inspection and Surface High Frequency Eddy Current (HFEC) Inspection of the STA
1000 Front Spar Shear Tie at Left Buttock Line (LBL) 11.33, LBL 33.99, LBL 57.50, LBL 75.92, and Inter-
costal Lug Fitting at LBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 5: GET
REPAIR ACCESS.
-CONDITION 8 (ACTION 1):
Install a new front spar shear
tie at affected location.
CONDITION 8:
ANY CRACK FOUND
ON THE LBL 33.99,
OR LBL 57.50, OR LBL
75.92 FRONT SPAR
SHEAR TIE.
-FIGURE 39
and FIGURE
40
Group 3, Configu-
ration 3:
LBL 33.99
-FIGURE 41
and FIGURE
42
Group 3, Configu-
ration 4:
LBL 33.99
-FIGURE 43
and FIGURE
44
Group 3, Configu-
ration 3:
LBL 57.50
-FIGURE 45
and FIGURE
46
Group 3, Configu-
ration 4:
LBL 57.50
-FIGURE 47
and FIGURE
48
Group 3, Configu-
ration 3:
LBL 75.92
-FIGURE 49
and FIGURE
50
Group 3, Configu-
ration 4:
LBL 75.92
Do PART 6: CLOSE
REPAIR ACCESS.
-
and
Do PART 2: CLOSE
INSPECTION AC-
CESS.
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 8 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
-Group 3, Configuration 1, 3:
FIGURE 27
-Group 3, Configuration 2, 4:
FIGURE 28
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
36 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 37

Group 3:
Table 5: Detailed Inspection and Surface High Frequency Eddy Current (HFEC) Inspection of the STA
1000 Front Spar Shear Tie at Left Buttock Line (LBL) 11.33, LBL 33.99, LBL 57.50, LBL 75.92, and Inter-
costal Lug Fitting at LBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
PART 2: CLOSE IN-
SPECTION AC-
CESS.
--CONDITION 9:
NO CRACK FOUND
ON THE FRONT SPAR
SHEAR TIE AT LBL
11.33, LBL 33.99, LBL
57.50, LBL 75.92 OR
INTERCOSTAL LUG
FITTING AT LBL 11.33.
Do PART 1: GET
INSPECTION AC-
CESS.
-Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at LBL 11.33, LBL
33.99, LBL 57.50, LBL 75.92,
and intercostal lug fitting at
LBL 11.33 for any crack.
-Group 3, Configuration 1, 3:
FIGURE 27
-Group 3, Configuration 2, 4:
FIGURE 28
Group 3:
Table 6: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 1: GET
INSPECTION AC-
CESS.
Do a detailed inspection and
surface HFEC inspection of
the STA 1000 front spar shear
tie at RBL 11.33, RBL 33.99,
RBL 57.50, RBL 75.92, and
intercostal lug fitting at RBL
11.33 for any crack.
All airplanes.
-Group 3, Configuration 1, 3:
FIGURE 51
-Group 3, Configuration 2, 4-6:
FIGURE 52
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
37 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 38

Group 3:
Table 6: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 5: GET
REPAIR ACCESS.
-CONDITION 10 (ACTION 1):
Install a new front spar shear
tie at affected location.
CONDITION 10:
ANY CRACK FOUND
ON THE RBL 11.33
FRONT SPAR SHEAR
TIE AND NOT ON THE
RBL 11.33 INTER-
COSTAL LUG FIT-
TING.
-Group 3, Configuration 1:
FIGURE 53 and FIGURE 54
-Group 3, Configuration 2:
FIGURE 55 and FIGURE 56
Do PART 6: CLOSE
REPAIR ACCESS.
-
and
Do PART 2: CLOSE
INSPECTION AC-
CESS.
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 10 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
-Group 3, Configuration 1, 3:
FIGURE 51
-Group 3, Configuration 2, 4-6:
FIGURE 52
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
38 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 39

Group 3:
Table 6: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 5: GET
REPAIR ACCESS.
-CONDITION 11 (ACTION 1):
Install a new intercostal lug
fitting.
CONDITION 11:
ANY CRACK FOUND
ON THE RBL 11.33 IN-
TERCOSTAL LUG FIT-
TING AND NOT ON
THE RBL 11.33
FRONT SPAR SHEAR
TIE.
-FIGURE 57 and FIGURE 58
Do PART 6: CLOSE
REPAIR ACCESS.
and
Do PART 2: CLOSE
INSPECTION AC-
CESS.
-
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 11 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
-Group 3, Configuration 1, 3:
FIGURE 51
-Group 3, Configuration 2, 4-6:
FIGURE 52
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
39 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 40

Group 3:
Table 6: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 5: GET
REPAIR ACCESS.
-CONDITION 12 (ACTION 1):
Install a new front spar shear
tie and intercostal lug fitting.
CONDITION 12:
ANY CRACK FOUND
ON THE RBL 11.33
FRONT SPAR SHEAR
TIE AND RBL 11.33
INTERCOSTAL LUG
FITTING.
-Group 3, Configuration 1:
FIGURE 59 and FIGURE 60
-Group 3, Configuration 2:
FIGURE 61 and FIGURE 62
Do PART 6: CLOSE
REPAIR ACCESS.
-
and
Do PART 2: CLOSE
INSPECTION AC-
CESS.
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 12 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
-Group 3, Configuration 1, 3:
FIGURE 51
-Group 3, Configuration 2, 4-6:
FIGURE 52
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
40 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 41

Group 3:
Table 6: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
Do PART 5: GET
REPAIR ACCESS.
-CONDITION 13 (ACTION 1):
Install a new front spar shear
tie at affected location.
CONDITION 13:
ANY CRACK FOUND
ON THE RBL 33.99,
OR RBL 57.50, OR
RBL 75.92 FRONT
SPAR SHEAR TIE.
-FIGURE 63
and FIGURE
64
Group 3, Configu-
ration 3:
RBL 33.99
-FIGURE 65
and FIGURE
66
Group 3, Configu-
ration 4:
RBL 33.99
-FIGURE 67
and FIGURE
68
Group 3, Configu-
ration 5:
RBL 33.99
-FIGURE 69
and FIGURE
70
Group 3, Configu-
ration 4:
RBL 57.50
-FIGURE 71
and FIGURE
72
Group 3, Configu-
ration 6:
RBL 57.50
-FIGURE 73
and FIGURE
74
Group 3, Configu-
ration 4:
RBL 75.92
Do PART 6: CLOSE
REPAIR ACCESS.
-
and
Do PART 2: CLOSE
INSPECTION AC-
CESS.
Do PART 1: GET
INSPECTION AC-
CESS.
-CONDITION 13 (ACTION 2):
Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
-Group 3, Configuration 1, 3:
FIGURE 51
-Group 3, Configuration 2, 4-6:
FIGURE 52
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
41 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 42

Group 3:
Table 6: Detailed Inspection and Surface HFEC Inspection of the STA 1000 Front Spar Shear Tie at Right
Buttock Line (RBL) 11.33, RBL 33.99, RBL 57.50, RBL 75.92, and Intercostal Lug Fitting at RBL 11.33
Refer to the listed
procedures in SB
747-53A2904 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure.
Method of ComplianceActionCondition
PART 2: CLOSE IN-
SPECTION AC-
CESS.
--CONDITION 14:
NO CRACK FOUND
ON THE FRONT SPAR
SHEAR TIE AT RBL
11.33, RBL 33.99, RBL
57.50, RBL 75.92 OR
INTERCOSTAL LUG
FITTING AT RBL
11.33.
Do PART 1: GET
INSPECTION AC-
CESS.
-Repeat detailed inspection
and surface HFEC inspection
of the STA 1000 front spar
shear tie at RBL 11.33, RBL
33.99, RBL 57.50, RBL 75.92,
and intercostal lug fitting at
RBL 11.33 for any crack.
-Group 3, Configuration 1, 3:
FIGURE 51
-Group 3, Configuration 2, 4-6:
FIGURE 52
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
42 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 43 (OCR)

REQUIREMENTS BULLETIN 747-53A2904
ALERT  ALERT
This Figure applies only to: Group 1-2, Configuration 2.
STA
1000
- A
WING CENTER SECTION
FIGURE 1: LEFT SIDE - STA 1000 FRONT SPAR - SHEAR TIE AND INTERCOSTAL LUG FITTING - DETAILED
INSPECTION AND SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 1 OF 7)
Original Issue: December 16, 2020
Export Controlled ECCN: 9E991 - BOEING  747-53A2904 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  43 of 561

### Page 44 (OCR)

REQUIREMENTS BULLETIN 747-53A2904
ALERT  ALERT
LBL  LBL  LBL
11.33  33.99  57.50  75.92
B
C-  D  D  D
VIEW LOOKING AFT
A-A
2941281
FIGURE 1: LEFT SIDE - STA 1000 FRONT SPAR - SHEAR TIE AND INTERCOSTAL LUG FITTING - DETAILED
INSPECTION AND SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 2 OF 7)
Original Issue: December 16, 2020
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  Work - See page 1 for details.  747-53A2904 RB  44 of 561

### Page 45 (OCR)

REQUIREMENTS BULLETIN 747-53A2904
ALERT  ALERT
2) INTERCOSTA  LUG FITTING
YPICA
CRACI
•STANDOFF
(1) SHEAR TIE
DETAILED
INSPECTION  VIEW LOOKING OUTBOARD  AT LBL 11.33
HFEC  B-B  2941282
INSPECTION
FIGURE 1: LEFT SIDE - STA 1000 FRONT SPAR - SHEAR TIE AND INTERCOSTAL LUG FITTING - DETAILED
INSPECTION AND SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 3 OF 7)
Original Issue: December 16, 2020
Export Controlled ECCN: 9E991 - BOEING  747-53A2904 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  45 of 561

### Page 46 (OCR)

REQUIREMENTS BULLETIN 747-53A2904
ALERT  ALERT
INTERCOSTAL (3)  INTERCOSTAL
LUG FITTING  LUG FITTING
STANDOFF  TYPICAL
CRACK
SHEAR TIE 1
INTERCOSTAL
LUG FITTING
DETAILED
INSPECTION  VIEW LOOKING INBOARD  AT LBL 11.33
HFEC  C-C  2941283
INSPECTION
FIGURE 1: LEFT SIDE - STA 1000 FRONT SPAR - SHEAR TIE AND INTERCOSTAL LUG FITTING - DETAILED
INSPECTION AND SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 4 OF 7)
Original Issue: December 16, 2020
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2904 RB
Work - See page 1 for details.  46 of 561

### Page 47 (OCR)

REQUIREMENTS BULLETIN 747-53A2904
ALERT  ALERT
STA
1000
•
TYPICAL
CRACK
• STANDOFF
1 SHEAR TIE
DETAILED
INSPECTION  VIEW LOOKING OUTBOARD AT LBL 33.99,
LBL 57.50 AND LBL 75.92 SIMILAR
HFEC  (TYPICAL)  2941574
INSPECTION  D-D
FIGURE 1: LEFT SIDE - STA 1000 FRONT SPAR - SHEAR TIE AND INTERCOSTAL LUG FITTING - DETAILED
INSPECTION AND SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 5 OF 7)
Original Issue: December 16, 2020
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-53A2904 RB
Work - See page 1 for details.  47 of 561

### Page 48 (OCR)

REQUIREMENTS BULLETIN 747-53A2904
ALERT  ALERT
LBL
33.99
SHEAR TIE (1
- STANDOFF
NBD
DETAILED
INSPECTION  VIEW LOOKING AFT AT LBL 33.99.
HFEC  INSPECTION  LBL 57.50 AND LBL 75.92 SIMILAR  (TYPICAL)  E-E  2941644
FIGURE 1: LEFT SIDE - STA 1000 FRONT SPAR - SHEAR TIE AND INTERCOSTAL LUG FITTING - DETAILED
INSPECTION AND SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 6 OF 7)
Original Issue: December 16, 2020
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2904 RB
Work - See page 1 for details.  48 of 561

### Page 49

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)(b)1LBL 11.33SHEAR TIEInspect1
(a)(b)1LBL 33.99SHEAR TIEInspect
(a)(b)1LBL 57.50SHEAR TIEInspect
(a)(b)1LBL 75.92SHEAR TIEInspect
(b)(c) 1LBL 11.33INTERCOSTAL LUG
FITTING
Inspect2
(d) 1LBL 11.33INTERCOSTAL LUG
FITTING
Inspect3
(e) 1LBL 11.33SHEAR TIEInspect4
(e) 1LBL 33.99SHEAR TIEInspect
(e) 1LBL 57.50SHEAR TIEInspect
(e) 1LBL 75.92SHEAR TIEInspect
(f) 1LBL 33.99SHEAR TIEInspect5
(f) 1LBL 57.50SHEAR TIEInspect
(f) 1LBL 75.92SHEAR TIEInspect
(a) Do a detailed inspection of the shear tie at LBL 11.33, LBL 33.99, LBL 57.50, LBL 75.92 for any crack.
(b) If structure covers an area of the shear tie or intercostal lug fitting that is inspected, then it is only necessary
to inspect the area of the shear tie or intercostal lug fitting that is visible. It is not necessary to remove
structure to do the inspection.
(c) Do a detailed inspection of the intercostal lug fitting at LBL 11.33 for any crack.
(d) Do a surface High Frequency Eddy Current (HFEC) inspection of the intercostal lug fitting at LBL 11.33
for any crack. Inspect the lug radius in accordance with 747 NDT Manual Part 6, 51-00-00 Procedure 23.
(e) Do a surface HFEC inspection of the shear tie at LBL 11.33, LBL 33.99, LBL 57.50, LBL 75.92 for any
crack. Inspect around the standoff fasteners in accordance with 747 NDT Manual Part 6, 51-00-00 Proce-
dure 23.
(f) Do a surface HFEC inspection of the shear tie at LBL 33.99, LBL 57.50, LBL 75.92 for any crack. Minimum
inspection area is from the third fastener from the top of the upper vertical flange to the centerline of the
second web fastener from the top of the spar web. Inspect along the forward edge of the shear tie in ac-
cordance with 747 NDT Manual Part 6, 51-00-00 Procedure 23.
FIGURE 1: LEFT SIDE - STA 1000 FRONT SPAR - SHEAR TIE AND INTERCOSTAL LUG FITTING - DETAILED
INSPECTION AND SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
(SHEET 7 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
49 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 50 (OCR)

REQUIREMENTS BULLETIN 747-53A2904
ALERT  ALERT
This Figure applies only to: Group 2, Configuration 2.
STA
1000
WING CENTER SECTION  2941781
FIGURE 2: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - REMOVAL
(SHEET 1 OF 5)
Original Issue: December 16, 2020
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-53A2904 RB
Work - See page 1 for details.  50 of 561

### Page 51 (OCR)

REQUIREMENTS BULLETIN 747-53A2904
ALERT  ALERT
LBL
11.33
INBD
VIEW LOOKING AFT
A-A
2941782
FIGURE 2: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - REMOVAL
(SHEET 2 OF 5)
Original Issue: December 16, 2020
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2904 RB
Work - See page 1 for details.  51 of 561

### Page 52 (OCR)

REQUIREMENTS BULLETIN 747-53A2904
ALERT  ALERT
4 LOCATIONS
STA  (2  3 LOCATIONS  INTERCOSTAL
1000  LUG FITTING
4 LOCATIONS (2  1 4 LOCATIONS
STANDOFF 1
SHEAR TIE (4
5) EXISTING  STRUCTURE
- C
VIEW LOOKING INBOARD  B-B  2941784
FIGURE 2: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - REMOVAL
(SHEET 3 OF 5)
Original Issue: December 16, 2020
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-53A2904 RB
Work - See page 1 for details.  52 of 561

### Page 53 (OCR)

REQUIREMENTS BULLETIN 747-53A2904
ALERT  ALERT
LBL
11.33
SHEAR TIE 4
1 STANDOFF
5) EXISTIN
/ STRUCTUR
INBD
VIEW LOOKING AFT
C-C
2941816
FIGURE 2: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - REMOVAL
(SHEET 4 OF 5)
Original Issue: December 16, 2020
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2904 RB
Work - See page 1 for details.  53 of 561

### Page 54

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
Refer to 747-400F
SRM 51-40-02 as an
accepted procedure.
2-RIVETSRemove1
(a) 1BACN10GH3A4STANDOFFRemove / Keep
(b) 19-FASTENERSRemove2
- 19-COLLARSRemove
(c) 4-FASTENERSRemove3
- 4-NUTSRemove
- 1-SHEAR TIERemove4
(d) --EXISTING STRUC-
TURE
Clean5
(a) Make a note of the STA and waterline location of the standoff for installation to the new shear tie.
(b) Remove fasteners common to the shear tie, front spar, intercostal lug fitting and floor beam structure.
Refer to 747-400F SRM 51-40-02 as an accepted procedure.
(c) Remove fasteners common to the shear tie and front spar. Refer to 747-400F SRM 51-40-02 as an ac-
cepted procedure.
(d) Remove and clean sealant from the exposed area common to the shear tie. Refer to SOPM 20-30-03 as
an accepted procedure.
FIGURE 2: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - REMOVAL
(SHEET 5 OF 5)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
54 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 55 (OCR)

REQUIREMENTS BULLETIN 747-53A2904
ALERT  ALERT
This Figure applies only to: Group 2, Configuration 2.
STA
1000
- A
WING CENTER SECTION
FIGURE 3: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - INSTALLATION
(SHEET 1 OF 7)
Original Issue: December 16, 2020
Export Controlled ECCN: 9E991 - BOEING  747-53A2904 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  55 of 561

### Page 56 (OCR)

REQUIREMENTS BULLETIN 747-53A2904
ALERT  ALERT
LBL
11.33
VIEW LOOKING AFT
A-A
2942223
FIGURE 3: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - INSTALLATION
(SHEET 2 OF 7)
Original Issue: December 16, 2020
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-53A2904 RB
Work - See page 1 for details.  56 of 561

### Page 57 (OCR)

REQUIREMENTS BULLETIN 747-53A2904
ALERT  ALERT
STA  INTERCOSTAL
1000  LUG FITTING
A8 48
STANDOFF 12
SHEAR TIE 123
•WD
VIEW LOOKING INBOARD  B-B  2942224
FIGURE 3: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - INSTALLATION
(SHEET 3 OF 7)
Original Issue: December 16, 2020
PROPRIETARY - Copyright ® Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-53A2904 RB
Work - See page 1 for details.  57 of 561

### Page 58 (OCR)

REQUIREMENTS BULLETIN 747-53A2904
ALERT  ALERT
LBL
11.33
SHEAR TIE 123
124€
STANDOFF
INBD
VIEW LOOKING AFT
C-C
2942227
FIGURE 3: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - INSTALLATION
(SHEET 4 OF 7)
Original Issue: December 16, 2020
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-53A2904 RB
Work - See page 1 for details.  58 of 561

### Page 59

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
DO NOT PRELOAD ANY TUBING OR CLAMPS, OR BEND FLEXIBLE HOSE ASSEMBLY
RADII INCORRECTLY. INSTALL FLARELESS FITTING FLEXIBLE HOSE. REFER TO
747-400 AMM 20-11-18 AND SOPM 20-50-00 AS ACCEPTED PROCEDURES.
CAUTION
More DataQtyIdentificationNameTaskStep
(a) 169B14644U3SHEAR TIELocate1
(b) 1BACN10GH3A4STANDOFFLocate
Refer to fastener
code table. (c)(d)
169B14644U3SHEAR TIEDrill 2
Refer to fastener
code table. (d)
1BACN10GH3A4STANDOFFDrill
Refer to fastener
code table. (e)(f)
169B14644U3SHEAR TIEColdWork3
(g) -BMS 5-95, TYPE I,
CLASS B
SEALANTApply4
Refer to fastener
code table.
169B14644U3SHEAR TIEInstall (New)5
Refer to fastener
code table.
1BACN10GH3A4STANDOFFInstall (Kept)6
(h) -BMS 5-45, CLASS CFUEL TANK SEALANTApply7
(a) Locate shear tie common to the front spar, floor beam structure and intercostal lug fitting.
(b) Use the recorded position to locate the standoff. Maintain a 2D minimum edge margin on shear tie. If a
2D minimum edge margin cannot be achieved, it is acceptable to install a different length standoff to
maintain original system routing.
(c) Match drill fastener holes common to the floor beam structure and intercostal lug fitting and back drill
fastener holes common to the front spar into the new shear tie. Maintain a 2D minimum edge margin.
(d) Break all sharp edges after fastener holes are drilled.
(e) Cold work holes in the shear tie for installation of 1/64 oversize fasteners in accordance with 747-400F
SRM 51-40-09, Class I.
(f) If 1/32 oversize fasteners are required at cold worked hole locations, cold work fasteners holes through
all the parts in the stack up.
(g) Apply faying surface sealant on all mating parts or surfaces. Refer to SOPM 20-50-19 as an accepted
procedure.
(h) Capseal fasteners common to the shear tie and the center tank, front spar. Refer to 747-400F SRM 51-
20-05 as an accepted procedure.
FIGURE 3: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - INSTALLATION
(SHEET 5 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 16, 2020
747-53A2904 RB
59 of 561
REQUIREMENTS BULLETIN 747-53A2904
ALERTALERT

### Page 60 (OCR)

REQUIREMENTS BULLETIN 747-53A2904
ALERT  ALERT
FASTENER
DIAMETER
(OPTIONAL)
LETTER CODE  HEAD LOCATION
D  6F  * N = NEAR SIDE  F = FAR SIDE
FLUID TIGHT *  (OPTIONAL)
COUNTERSINK  FASTENER
LENGTH/GRIP
EXAMPLE OF FASTENER SYMBOL  (OPTIONAL)  2315034
The codes shown below agree with the letter shown in the upper left corner of the fastener symbols in the figure.
A number in the lower right corner gives the grip length of the fastener. The QTY numbers shown below are the
number of fasteners necessary for this figure.
Code  Name  Identification  Qty  Hole Dia  More Data
BOLT, HEX DRIVE  BACB30MY8K11X  5  0.263 - 0.266  Cold work fastener hole.
(a)
COLLAR  BACC30M8  5
BOLT, HEX DRIVE  BACB30MY8K14X  6  0.263 - 0.266  Cold work fastener hole.
(a)
COLLAR  BACC30M8  6
BOLT, HEX DRIVE  BACB30NW8K9X  2  0.263 - 0.266  Cold work fastener hole.
(a)
COLLAR  BACC30M8  2
BOLT, HEX DRIVE  BACB30NW8K13X  2  0.263 - 0.266  (b)(c)(d)
COLLAR  BACC30M8  2
BOLT, HEX DRIVE  BACB30NW8K14X  2  0.263 - 0.266  Cold work fastener hole.
(a)
COLLAR  BACC30M8  2
BOLT, HEX DRIVE  BACB30NW8K16X  2  0.263 - 0.266  (b) (c) (d)
COLLAR  BACC30M8  2
C  BOLT  BACB30WQ5K16LX  4  0.3241 -  (b) (c)(d)
0.3262
WASHER  BACW10AT35AS  4  Install washer under nut.
NUT, SELF LOCKING  BACN10HY5AC  4
RIVET  BACR15BB4D8C  2  0.128 - 0.134
Install wet with BMS 5-95, TYPE I CLASS B sealant. Refer to SOPM 20-50-19 as an accepted procedure.
FIGURE 3: LEFT SIDE - STA 1000 FRONT SPAR - LBL 11.33 SHEAR TIE - INSTALLATION
(SHEET 6 OF 7)
Original Issue: December 16, 2020
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  747-53A2904 RB
Work - See page 1 for details.  60 of 561

The text continues at https://openairdocs.org/service-documents/boeing/747-53a2904-rb/file/d6e60aa1ffa5.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
