# Boeing Alert Requirements Bulletin 747-53A2910 RB: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2023-0432; AD 2023-11-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Requirements Bulletin 747-53A2910 RB](https://openairdocs.org/service-documents/boeing/747-53a2910-rb.md)
- Title as filed: RB-747-53A2910-00-- BOEING
- Pages: 108
- PDF: https://openairdocs.org/files/sha256/1c/74/1c74ee176e66e67954c831dbe23cb16eb11d2c1d112ddbf68be9ea8b9b5978b2
- Page: https://openairdocs.org/service-documents/boeing/747-53a2910-rb/file/1c74ee176e66

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
747
Requirements Bulletin
ALERT
Number: 747-53A2910 RB
Original Issue: September 21, 2022
ATA System: 5300
SUBJECT: FUSELAGE STRUCTURE - General - Stringers Forward and Aft of the Pressure
Bulkhead at Body Station (STA) 2360 Inspection
EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations
(EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for
export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per
Supp.1 to Part 740 of the EAR.
9E991ECCN:
Copyright © 2022 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: September 21, 2022
747-53A2910 RB
1 of 108
3.0

### Page 2

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
2 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
1 . E F F E C T I V I T Y  ................................................ 5
A. Airplanes ................................................ 5
B . S p a r e s  A f f e c t e d  ............................................ 6
2. CONCURRENT REQUIREMENTS ..................................... 6
3 . C O M P L I A N C E  ................................................ 6
4. APPROVAL ................................................ 1 9
5. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 1
A. General Information ......................................... 2 1
B. Work Instructions ........................................... 2 2
FIGURE 1: LEFT SIDE - STRINGER ASSEMBLIES S-3L TO S-5L, FORWARD OF THE PRESSURE
BULKHEAD AT STA 2360 - INSPECTION [Group 1] ..................... 3 5
FIGURE 2: LEFT SIDE - STRINGER ASSEMBLIES S-1L, S-2L, S-6L TO S-12L, S-14L, S-15L AND S-17L,
FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION [Group 1] . . 40
FIGURE 3: LEFT SIDE - STRINGER ASSEMBLIES S-18L TO S-25L, S-34L, S-36L, S-38L, S-40L, S-42L,
S-44L, S-46L AND S-48L TO S-51L, FORWARD OF THE PRESSURE BULKHEAD AT STA
2360 - INSPECTION [Group 1] ................................ 4 5
FIGURE 4: RIGHT SIDE - STRINGER ASSEMBLIES S-3R TO S-5R, FORWARD OF THE PRESSURE
BULKHEAD AT STA 2360 - INSPECTION [Group 1] ..................... 4 9
FIGURE 5: RIGHT SIDE - STRINGER ASSEMBLIES S-1R, S-2R, S-6R TO S-12R, S-14R, S-15R AND
S-17R, FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION [Group 1]
.................................................. 5 4
FIGURE 6: RIGHT SIDE - STRINGER ASSEMBLIES S-18R TO S-25R, S-34R, S-36R, S-38R, S-40R,
S-42R, S-44R, S-46R AND S-48R TO S-51R, FORWARD OF THE PRESSURE BULKHEAD
AT STA 2360 - INSPECTION [Group 1] ............................ 5 9
FIGURE 7: LEFT SIDE - STRINGER ASSEMBLIES S-3L TO S-5L AND S-13L TO S-17L, FORWARD OF
THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION [Group 2] .......... 6 3
FIGURE 8: LEFT SIDE - STRINGER ASSEMBLIES S-1L, S-2L AND S-6L TO S-12L, FORWARD OF THE
PRESSURE BULKHEAD AT STA 2360 - INSPECTION [Group 2] ............. 6 8
FIGURE 9: LEFT SIDE - STRINGER ASSEMBLIES S-18L TO S-25L, S-34L, S-36L, S-38L, S-40L, S-42L,
S-44L, S-46L AND S-48L TO S-51L, FORWARD OF THE PRESSURE BULKHEAD AT STA
2360 - INSPECTION [Group 2] ................................ 7 3
FIGURE 10: RIGHT SIDE - STRINGER ASSEMBLIES S-3R TO S-5R AND S-13R TO S-17R, FORWARD
OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION [Group 2] ........ 7 7
FIGURE 11: RIGHT SIDE - STRINGER ASSEMBLIES S-1R, S-2R AND S-6R TO S-12R, FORWARD OF
THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION [Group 2] .......... 8 2
FIGURE 12: RIGHT SIDE - STRINGER ASSEMBLIES S-18R TO S-25R, S-34R, S-36R, S-38R, S-40R,
S-42R, S-44R, S-46R, AND S-48R TO S-51R, FORWARD OF THE PRESSURE BULKHEAD
AT STA 2360 - INSPECTION [Group 2] ............................ 8 7
FIGURE 13: LEFT SIDE - STRINGER ASSEMBLIES S-1L TO S-3L, AFT OF THE PRESSURE BULKHEAD
AT STA 2360 - INSPECTION ................................. 9 1
FIGURE 14: LEFT SIDE - STRINGER ASSEMBLIES S-4L TO S-10L, S-12L TO S-16L, S-18L TO S-22L,
S-24L TO S-26L, S-34L, S-36L, S-38L, S-40L, S-42L, S-44L, S-46L AND S-48L TO S-51L, AFT
OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION .............. 9 6
FIGURE 15: RIGHT SIDE - STRINGER ASSEMBLIES S-1R TO S-3R, AFT OF THE PRESSURE BULKHEAD
AT STA 2360 - INSPECTION ................................ 1 0 0
FIGURE 16: RIGHT SIDE - STRINGER ASSEMBLIES S-4R TO S-10R, S-12R TO S-16R, S-18R TO S-22R,
S-24R TO S-26R, S-34R, S-36R, S-38R, S-40R, S-42R, S-44R, S-46R AND S-48R TO S-51R,
AFT OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION ........... 1 0 5
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
3 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
4 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
747
Requirements Bulletin
ALERT
Number: 747-53A2910 RB
Original Issue: September 21, 2022
ATA System: 5300
SUBJECT: FUSELAGE STRUCTURE - General - Stringers Forward and Aft of the Pressure
Bulkhead at Body Station (STA) 2360 Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING
PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN
(RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL
TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB
WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
1. Effectivity
A. Airplanes
This bulletin is applicable to 747-8, 747-8F Airplane(s), line number(s) 1420-1574 in 2 Group(s).
Where the effectivity is presented with hyphens between line numbers, the airplane applicability
means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group Information for the applicable airplanes is given below.
DESCRIPTIONCONFIGURATIONGROUP
747-8 Airplanes.-1
747-8F Airplanes.-2
Airplane Models:
747-8, 747-8F
GroupVariable Number
1RC001 - RC009
1RC021 - RC040
1RC051 - RC060
1RC066 - RC072
GroupVariable Number
1RC076 - RC077
2RC501 - RC514
2RC521 - RC528
2RC531 - RC541
GroupVariable Number
2RC546 - RC566
2RC571 - RC582
2RC601 - RC610
2RC641 - RC644
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
5 of 108

### Page 6

GroupVariable Number
2RC651 - RC652
2RC661
GroupVariable Number
2RC671 - RC674
2RC681 - RC696
GroupVariable Number
2RC701 - RC704
--
B. Spares Affected
None.
2. CONCURRENT REQUIREMENTS
None.
3. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
Requirements Bulletin 747-53A2910 RB. The Airworthiness Directive will make the compliance tasks and
times given in Requirements Bulletin 747-53A2910 RB mandatory.
Group 1:
Accomplish the required action(s), based on the applicable condition(s) in Table(s) 1, 2, 5, and 6, in
accordance with Accomplishment Instructions.
Group 2:
Accomplish the required action(s), based on the applicable condition(s) in Table(s) 3, 4, 5, and 6, in
accordance with Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
6 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 7

Group 1:
Table 1: Left side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA) 2360
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 36
months after the
Original Issue
date of Require-
ments Bulletin
747-53A2910
RB.
Before 8,000 to-
tal flight cycles
or 8 years after
the date of is-
suance of the
original standard
certificate of air-
worthiness or the
original export
certificate of air-
worthiness,
whichever oc-
curs first.
ACTION 1: Do a Low Fre-
quency Eddy Current (LFEC)
inspection of stringer side-
walls and a detailed inspec-
tion of stringer assemblies S-
3L to S-5L for any crack.
All Airplanes.
ACTION 2: Do a High Fre-
quency Eddy Current (HFEC)
inspection of stringer side-
walls and a detailed inspec-
tion of stringer assemblies S-
1L, S-2L, S-6L to S-12L, S-
14L, S-15L and S-17L for any
crack.
ACTION 3: Do a detailed in-
spection of stringer assem-
blies S-18L to S-25L, S-34L,
S-36L, S-38L, S-40L, S-42L,
S-44L, S-46L and S-48L to S-
51L for any crack.
8,000 flight cycles or
8 years, whichever
occurs first.
-Repeat the LFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-3L to S-5L for
any crack.
CONDITION 1: NO
CRACK FOUND
DURING THE LFEC
INSPECTION OF
STRINGER SIDE-
WALLS AND THE
DETAILED INSPEC-
TION OF STRINGER
ASSEMBLIES S-3L
TO S-5L
-Before further flight.CONDITION 2 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 2: ANY
CRACK FOUND
DURING THE LFEC
INSPECTION OF
STRINGER SIDE-
WALLS OR THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-3L TO
S-5L
8,000 flight cycles or
8 years, whichever
occurs first.
-CONDITION 2 (ACTION 2):
Repeat the LFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-3L to S-5L for
any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
7 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 8

Group 1:
Table 1: Left side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA) 2360
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
8,000 flight cycles or
8 years, whichever
occurs first.
-Repeat the HFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-1L, S-2L, S-6L
to S-12L, S-14L, S-15L and
S-17L for any crack.
CONDITION 3: NO
CRACK FOUND
DURING THE HFEC
INSPECTION OF
STRINGER SIDE-
WALLS AND THE
DETAILED INSPEC-
TION OF STRINGER
ASSEMBLIES S-1L,
S-2L, S-6L TO S-12L,
S-14L, S-15L AND S-
17L
-Before further flight.CONDITION 4 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 4: ANY
CRACK FOUND
DURING THE HFEC
INSPECTION OF
STRINGER SIDE-
WALLS OR THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-1L, S-
2L, S-6L TO S-12L,
S-14L, S-15L AND S-
17L
8,000 flight cycles or
8 years, whichever
occurs first.
-CONDITION 4 (ACTION 2):
Repeat the HFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-1L, S-2L, S-6L
to S-12L, S-14L, S-15L and
S-17L for any crack.
8,000 flight cycles or
8 years, whichever
occurs first.
-Repeat the detailed inspec-
tion of stringer assemblies S-
18L to S-25L, S-34L, S-36L,
S-38L, S-40L, S-42L, S-44L,
S-46L and S-48L to S-51L for
any crack.
CONDITION 5: NO
CRACK FOUND
DURING THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-18L TO
S-25L, S-34L, S-36L,
S-38L, S-40L, S-42L,
S-44L, S-46L AND S-
48L TO S-51L
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
8 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 9

Group 1:
Table 1: Left side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA) 2360
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 6 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 6: ANY
CRACK FOUND
DURING THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-18L TO
S-25L, S-34L, S-36L,
S-38L, S-40L, S-42L,
S-44L, S-46L AND S-
48L TO S-51L
8,000 flight cycles or
8 years, whichever
occurs first.
-CONDITION 6 (ACTION 2):
Repeat the detailed inspec-
tion of stringer assemblies S-
18L to S-25L, S-34L, S-36L,
S-38L, S-40L, S-42L, S-44L,
S-46L and S-48L to S-51L for
any crack.
Group 1:
Table 2: Right side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA)
2360
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 36
months after the
Original Issue
date of Require-
ments Bulletin
747-53A2910
RB.
Before 8,000 to-
tal flight cycles
or 8 years after
the date of is-
suance of the
original standard
certificate of air-
worthiness or the
original export
certificate of air-
worthiness,
whichever oc-
curs first.
ACTION 1: Do a LFEC inspec-
tion of stringer sidewalls and
a detailed inspection of
stringer assemblies S-3R to
S-5R for any crack.
All Airplanes.
ACTION 2: Do a HFEC in-
spection of stringer sidewalls
and a detailed inspection of
stringer assemblies S-1R, S-
2R, S-6R to S-12R, S-14R,
S-15R and S-17R for any
crack.
ACTION 3: Do a detailed in-
spection of stringer assem-
blies S-18R to S-25R, S-34R,
S-36R, S-38R, S-40R, S-42R,
S-44R, S-46R and S-48R to
S-51R for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
9 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 10

Group 1:
Table 2: Right side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA)
2360
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
8,000 flight cycles or
8 years, whichever
occurs first.
-Repeat the LFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-3R to S-5R for
any crack.
CONDITION 7: NO
CRACK FOUND
DURING THE LFEC
INSPECTION OF
STRINGER SIDE-
WALLS AND THE
DETAILED INSPEC-
TION OF STRINGER
ASSEMBLIES S-3R
TO S-5R
-Before further flight.CONDITION 8 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 8: ANY
CRACK FOUND
DURING THE LFEC
INSPECTION OF
STRINGER SIDE-
WALLS OR THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-3R TO
S-5R
8,000 flight cycles or
8 years, whichever
occurs first.
-CONDITION 8 (ACTION 2):
Repeat the LFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-3R to S-5R for
any crack.
8,000 flight cycles or
8 years, whichever
occurs first.
-Repeat the HFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-1R, S-2R, S-6R
to S-12R, S-14R, S-15R and
S-17R for any crack.
CONDITION 9: NO
CRACK FOUND
DURING THE HFEC
INSPECTION OF
STRINGER SIDE-
WALLS AND THE
DETAILED INSPEC-
TION OF STRINGER
ASSEMBLIES S-1R,
S-2R, S-6R TO S-
12R, S-14R, S-15R
AND S-17R
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
10 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 11

Group 1:
Table 2: Right side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA)
2360
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 10 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 10: ANY
CRACK FOUND
DURING THE HFEC
INSPECTION OF
STRINGER SIDE-
WALLS OR THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-1R, S-
2R, S-6R TO S-12R,
S-14R, S-15R AND S-
17R
8,000 flight cycles or
8 years, whichever
occurs first.
-CONDITION 10 (ACTION 2):
Repeat the HFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-1R, S-2R, S-6R
to S-12R, S-14R, S-15R and
S-17R for any crack.
8,000 flight cycles or
8 years, whichever
occurs first.
-Repeat the detailed inspec-
tion of stringer assemblies S-
18R to S-25R, S-34R, S-36R,
S-38R, S-40R, S-42R, S-44R,
S-46R and S-48R to S-51R
for any crack.
CONDITION 11: NO
CRACK FOUND
DURING THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-18R TO
S-25R, S-34R, S-36R,
S-38R, S-40R, S-42R,
S-44R, S-46R AND S-
48R TO S-51R
-Before further flight.CONDITION 12 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 12: ANY
CRACK FOUND
DURING THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-18R TO
S-25R, S-34R, S-36R,
S-38R, S-40R, S-42R,
S-44R, S-46R AND S-
48R TO S-51R
8,000 flight cycles or
8 years, whichever
occurs first.
-CONDITION 12 (ACTION 2):
Repeat the detailed inspec-
tion of stringer assemblies S-
18R to S-25R, S-34R, S-36R,
S-38R, S-40R, S-42R, S-44R,
S-46R and S-48R to S-51R
for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
11 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 12

Group 2:
Table 3: Left side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA) 2360
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 36
months after the
Original Issue
date of Require-
ments Bulletin
747-53A2910
RB.
Before 8,000 to-
tal flight cycles
or 8 years after
the date of is-
suance of the
original standard
certificate of air-
worthiness or the
original export
certificate of air-
worthiness,
whichever oc-
curs first.
ACTION 1: Do a Low Fre-
quency Eddy Current (LFEC)
inspection of stringer side-
walls and a detailed inspec-
tion of stringer assemblies S-
3L to S-5L and S-13L to S-
17L for any crack.
All Airplanes.
ACTION 2: Do a High Fre-
quency Eddy Current (HFEC)
inspection of stringer side-
walls and a detailed inspec-
tion of stringer assemblies S-
1L, S-2L and S-6L to S-12L
for any crack.
ACTION 3: Do a detailed in-
spection of stringer assem-
blies S-18L to S-25L, S-34L,
S-36L, S-38L, S-40L, S-42L,
S-44L, S-46L and S-48L to S-
51L for any crack.
8,000 flight cycles or
8 years, whichever
occurs first.
-Repeat the LFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-3L to S-5L and
S-13L to S-17L for any crack.
CONDITION 13: NO
CRACK FOUND
DURING THE LFEC
INSPECTION OF
STRINGER SIDE-
WALLS AND THE
DETAILED INSPEC-
TION OF STRINGER
ASSEMBLIES S-3L
TO S-5L AND S-13L
TO S-17L
-Before further flight.CONDITION 14 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 14: ANY
CRACK FOUND
DURING THE LFEC
INSPECTION OF
STRINGER SIDE-
WALLS OR THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-3L TO
S-5L AND S-13L TO
S-17L
8,000 flight cycles or
8 years, whichever
occurs first.
-CONDITION 14 (ACTION 2):
Repeat the LFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-3L to S-5L and
S-13L to S-17L for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
12 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 13

Group 2:
Table 3: Left side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA) 2360
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
8,000 flight cycles or
8 years, whichever
occurs first.
-Repeat the HFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-1L, S-2L and
S-6L to S-12L for any crack.
CONDITION 15: NO
CRACK FOUND
DURING THE HFEC
INSPECTION OF
STRINGER SIDE-
WALLS AND THE
DETAILED INSPEC-
TION OF STRINGER
ASSEMBLIES S-1L,
S-2L AND S-6L TO S-
12L
-Before further flight.CONDITION 16 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 16: ANY
CRACK FOUND
DURING THE HFEC
INSPECTION OF
STRINGER SIDE-
WALLS OR THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-1L, S-
2L AND S-6L TO S-
12L
8,000 flight cycles or
8 years, whichever
occurs first.
-CONDITION 16 (ACTION 2):
Repeat the HFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-1L, S-2L and
S-6L to S-12L for any crack.
8,000 flight cycles or
8 years, whichever
occurs first.
-Repeat the detailed inspec-
tion of stringer assemblies S-
18L to S-25L, S-34L, S-36L,
S-38L, S-40L, S-42L, S-44L,
S-46L and S-48L to S-51L for
any crack.
CONDITION 17: NO
CRACK FOUND
DURING THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-18L TO
S-25L, S-34L, S-36L,
S-38L, S-40L, S-42L,
S-44L, S-46L AND S-
48L TO S-51L
-Before further flight.CONDITION 18 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 18: ANY
CRACK FOUND
DURING THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-18L TO
S-25L, S-34L, S-36L,
S-38L, S-40L, S-42L,
S-44L, S-46L AND S-
48L TO S-51L
8,000 flight cycles or
8 years, whichever
occurs first.
-CONDITION 18 (ACTION 2):
Repeat the detailed inspec-
tion of stringer assemblies S-
18L to S-25L, S-34L, S-36L,
S-38L, S-40L, S-42L, S-44L,
S-46L and S-48L to S-51L for
any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
13 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 14

Group 2:
Table 4: Right side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA)
2360
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 36
months after the
Original Issue
date of Require-
ments Bulletin
747-53A2910
RB.
Before 8,000 to-
tal flight cycles
or 8 years after
the date of is-
suance of the
original standard
certificate of air-
worthiness or the
original export
certificate of air-
worthiness,
whichever oc-
curs first.
ACTION 1: Do a LFEC inspec-
tion of stringer sidewalls and
a detailed inspection of
stringer assemblies S-3R to
S-5R and S-13R to S-17R for
any crack.
All Airplanes.
ACTION 2: Do a HFEC in-
spection of stringer sidewalls
and a detailed inspection of
stringer assemblies S-1R, S-
2R and S-6R to S-12R for
any crack.
ACTION 3: Do a detailed in-
spection of stringer assem-
blies S-18R to S-25R, S-34R,
S-36R, S-38R, S-40R, S-42R,
S-44R, S-46R, and S-48R to
S-51R for any crack.
8,000 flight cycles or
8 years, whichever
occurs first.
-Repeat the LFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-3R to S-5R and
S-13R to S-17R for any
crack.
CONDITION 19: NO
CRACK FOUND
DURING THE LFEC
INSPECTION OF
STRINGER SIDE-
WALLS AND THE
DETAILED INSPEC-
TION OF STRINGER
ASSEMBLIES S-3R
TO S-5R AND S-13R
TO S-17R
-Before further flight.CONDITION 20 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 20: ANY
CRACK FOUND
DURING THE LFEC
INSPECTION OF
STRINGER SIDE-
WALLS OR THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-3R TO
S-5R AND S-13R TO
S-17R
8,000 flight cycles or
8 years, whichever
occurs first.
-CONDITION 20 (ACTION 2):
Repeat the LFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-3R to S-5R and
S-13R to S-17R for any
crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
14 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 15

Group 2:
Table 4: Right side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA)
2360
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
8,000 flight cycles or
8 years, whichever
occurs first.
-Repeat the HFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-1R, S-2R and
S-6R to S-12R for any crack.
CONDITION 21: NO
CRACK FOUND
DURING THE HFEC
INSPECTION OF
STRINGER SIDE-
WALLS AND THE
DETAILED INSPEC-
TION OF STRINGER
ASSEMBLIES S-1R,
S-2R AND S-6R TO
S-12R
-Before further flight.CONDITION 22 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 22: ANY
CRACK FOUND
DURING THE HFEC
INSPECTION OF
STRINGER SIDE-
WALLS OR THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-1R, S-
2R AND S-6R TO S-
12R
8,000 flight cycles or
8 years, whichever
occurs first.
-CONDITION 22 (ACTION 2):
Repeat the HFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-1R, S-2R and
S-6R to S-12R for any crack.
8,000 flight cycles or
8 years, whichever
occurs first.
-Repeat the detailed inspec-
tion of stringer assemblies S-
18R to S-25R, S-34R, S-36R,
S-38R, S-40R, S-42R, S-44R,
S-46R, and S-48R to S-51R
for any crack.
CONDITION 23: NO
CRACK FOUND
DURING THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-18R TO
S-25R, S-34R, S-36R,
S-38R, S-40R, S-42R,
S-44R, S-46R AND S-
48R TO S-51R
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
15 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 16

Group 2:
Table 4: Right side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA)
2360
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 24 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 24: ANY
CRACK FOUND
DURING THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-18R TO
S-25R, S-34R, S-36R,
S-38R, S-40R, S-42R,
S-44R, S-46R AND S-
48R TO S-51R
8,000 flight cycles or
8 years, whichever
occurs first.
-CONDITION 24 (ACTION 2):
Repeat the detailed inspec-
tion of stringer assemblies S-
18R to S-25R, S-34R, S-36R,
S-38R, S-40R, S-42R, S-44R,
S-46R, and S-48R to S-51R
for any crack.
Table 5: Left side, Inspection of Stringers Aft of the Pressure Bulkhead at Body Station (STA) 2360
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 36
months after the
Original Issue
date of Require-
ments Bulletin
747-53A2910
RB.
Before 8,000 to-
tal flight cycles
or 8 years after
the date of is-
suance of the
original standard
certificate of air-
worthiness or the
original export
certificate of air-
worthiness,
whichever oc-
curs first.
ACTION 1: Do a HFEC in-
spection of stringer sidewalls
and a detailed inspection of
stringer assemblies S-1L to
S-3L for any crack.
All Airplanes.
ACTION 2: Do a detailed in-
spection of stringer assem-
blies S-4L to S-10L, S-12L to
S-16L, S-18L to S-22L, S-24L
to S-26L, S-34L, S-36L, S-
38L, S-40L, S-42L, S-44L, S-
46L and S-48L to S-51L for
any crack.
8,000 flight cycles or
8 years, whichever
occurs first.
-Repeat the HFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-1L to S-3L for
any crack.
CONDITION 25: NO
CRACK FOUND
DURING THE HFEC
INSPECTION OF
STRINGER SIDE-
WALLS AND THE
DETAILED INSPEC-
TION OF STRINGER
ASSEMBLIES S-1L
TO S-3L
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
16 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 17

Table 5: Left side, Inspection of Stringers Aft of the Pressure Bulkhead at Body Station (STA) 2360
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 26 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 26: ANY
CRACK FOUND
DURING THE HFEC
INSPECTION OF
STRINGER SIDE-
WALLS OR THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-1L TO
S-3L
8,000 flight cycles or
8 years, whichever
occurs first.
-CONDITION 26 (ACTION 2):
Repeat the HFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-1L to S-3L for
any crack.
8,000 flight cycles or
8 years, whichever
occurs first.
-Repeat the detailed inspec-
tion of stringer assemblies S-
4L to S-10L, S-12L to S-16L,
S-18L to S-22L, S-24L to S-
26L, S-34L, S-36L, S-38L, S-
40L, S-42L, S-44L, S-46L and
S-48L to S-51L for any crack.
CONDITION 27: NO
CRACK FOUND
DURING THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-4L TO
S-10L, S-12L TO S-
16L, S-18L TO S-22L,
S-24L TO S-26L, S-
34L, S-36L, S-38L, S-
40L, S-42L, S-44L, S-
46L AND S-48L TO
S-51L
-Before further flight.CONDITION 28 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 28: ANY
CRACK FOUND
DURING THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-4L TO
S-10L, S-12L TO S-
16L, S-18L TO S-22L,
S-24L TO S-26L, S-
34L, S-36L, S-38L, S-
40L, S-42L, S-44L, S-
46L AND S-48L TO
S-51L
8,000 flight cycles or
8 years, whichever
occurs first.
-CONDITION 28 (ACTION 2):
Repeat the detailed inspec-
tion of stringer assemblies S-
4L to S-10L, S-12L to S-16L,
S-18L to S-22L, S-24L to S-
26L, S-34L, S-36L, S-38L, S-
40L, S-42L, S-44L, S-46L and
S-48L to S-51L for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
17 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 18

Table 6: Right side, Inspection of Stringers Aft of the Pressure Bulkhead at Body Station (STA) 2360
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 36
months after the
Original Issue
date of Require-
ments Bulletin
747-53A2910
RB.
Before 8,000 to-
tal flight cycles
or 8 years after
the date of is-
suance of the
original standard
certificate of air-
worthiness or the
original export
certificate of air-
worthiness,
whichever oc-
curs first.
ACTION 1: Do a HFEC in-
spection of stringer sidewalls
and a detailed inspection of
stringer assemblies S-1R to
S-3R for any crack.
All Airplanes.
ACTION 2: Do a detailed in-
spection of stringer assem-
blies S-4R to S-10R, S-12R
to S-16R, S-18R to S-22R, S-
24R to S-26R, S-34R, S-36R,
S-38R, S-40R, S-42R, S-44R,
S-46R and S-48R to S-51R
for any crack.
8,000 flight cycles or
8 years, whichever
occurs first.
-Repeat the HFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-1R to S-3R for
any crack.
CONDITION 29: NO
CRACK FOUND
DURING THE HFEC
INSPECTION OF
STRINGER SIDE-
WALLS AND THE
DETAILED INSPEC-
TION OF STRINGER
ASSEMBLIES S-1R
TO S-3R
-Before further flight.CONDITION 30 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 30: ANY
CRACK FOUND
DURING THE HFEC
INSPECTION OF
STRINGER SIDE-
WALLS OR THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-1R TO
S-3R
8,000 flight cycles or
8 years, whichever
occurs first.
-CONDITION 30 (ACTION 2):
Repeat the HFEC inspection
of stringer sidewalls and the
detailed inspection of stringer
assemblies S-1R to S-3R for
any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
18 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 19

Table 6: Right side, Inspection of Stringers Aft of the Pressure Bulkhead at Body Station (STA) 2360
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
8,000 flight cycles or
8 years, whichever
occurs first.
-Repeat the detailed inspec-
tion of stringer assemblies S-
4R to S-10R, S-12R to S-
16R, S-18R to S-22R, S-24R
to S-26R, S-34R, S-36R, S-
38R, S-40R, S-42R, S-44R,
S-46R and S-48R to S-51R
for any crack.
CONDITION 31: NO
CRACK FOUND
DURING THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-4R TO
S-10R, S-12R TO S-
16R, S-18R TO S-
22R, S-24R TO S-
26R, S-34R, S-36R,
S-38R, S-40R, S-42R,
S-44R, S-46R AND S-
48R TO S-51R
-Before further flight.CONDITION 32 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 32: ANY
CRACK FOUND
DURING THE DE-
TAILED INSPECTION
OF STRINGER AS-
SEMBLIES S-4R TO
S-10R, S-12R TO S-
16R, S-18R TO S-
22R, S-24R TO S-
26R, S-34R, S-36R,
S-38R, S-40R, S-42R,
S-44R, S-46R AND S-
48R TO S-51R
8,000 flight cycles or
8 years, whichever
occurs first.
-CONDITION 32 (ACTION 2):
Repeat the detailed inspec-
tion of stringer assemblies S-
4R to S-10R, S-12R to S-
16R, S-18R to S-22R, S-24R
to S-26R, S-34R, S-36R, S-
38R, S-40R, S-42R, S-44R,
S-46R and S-48R to S-51R.
4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
19 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 20

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
20 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT
BLANK PAGE

### Page 21

5.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. For the related SB, some locations are marked RC Start and RC
End to identify the requirements that are restated from the RB. For the related SB,
the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD.
Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations
to steps between RC Start and RC End, including substeps and identified figures.
For the related SB, the steps not between RC Start and RC End may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC; this is provided that the
steps between RC Start and RC End, including sub-steps and identified figures, can
still be done as specified, and the airplane can be put back in an airworthy condition.
Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. Boeing Service Letter 747-SL-51-048, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 747 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 747
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
21 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 22

6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
7. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
8. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
9. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
10. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation or assembly to detect damage, failure or irregularity. This could include
tactile assessment in which a component or assembly can be checked for
tightness/security. Available lighting is normally supplemented with a direct source
of good lighting at an intensity deemed appropriate. Inspection aids such as mirrors
and magnifying lenses may be necessary. Surface cleaning and elaborate access
procedures may be required.
11. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION,
do all of the ACTION numbers for that CONDITION or OPTION.
B. WORK INSTRUCTIONS
Actions Required for Compliance
1. Requirements
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
22 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 23

Group 1:
Table 1: Left side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA) 2360
Refer to the listed proce-
dures in SB 747-53A2910
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of Compli-
ance
ActionCondition
Do PART 1: OPEN ACCESS-ACTION 1: Do a Low Frequen-
cy Eddy Current (LFEC) inspec-
tion of stringer sidewalls and a
detailed inspection of stringer
assemblies S-3L to S-5L for
any crack.
All Airplanes.
-FIGURE 1
-FIGURE 2ACTION 2: Do a High Frequen-
cy Eddy Current (HFEC) inspec-
tion of stringer sidewalls and a
detailed inspection of stringer
assemblies S-1L, S-2L, S-6L
to S-12L, S-14L, S-15L and S-
17L for any crack.
-FIGURE 3ACTION 3: Do a detailed in-
spection of stringer assemblies
S-18L to S-25L, S-34L, S-36L,
S-38L, S-40L, S-42L, S-44L, S-
46L and S-48L to S-51L for any
crack.
Do PART 2: CLOSE AC-
CESS
-Repeat the LFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-3L to S-5L for any
crack.
CONDITION 1: NO
CRACK FOUND DUR-
ING THE LFEC INSPEC-
TION OF STRINGER
SIDEWALLS AND THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-3L TO S-5L
-FIGURE 1
--CONDITION 2 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 2: ANY
CRACK FOUND DUR-
ING THE LFEC INSPEC-
TION OF STRINGER
SIDEWALLS OR THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-3L TO S-5L
Do PART 2: CLOSE AC-
CESS
-
Do PART 2: CLOSE AC-
CESS
-CONDITION 2 (ACTION 2):
Repeat the LFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-3L to S-5L for any
crack.
-FIGURE 1
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
23 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 24

Group 1:
Table 1: Left side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA) 2360
Refer to the listed proce-
dures in SB 747-53A2910
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of Compli-
ance
ActionCondition
Do PART 2: CLOSE AC-
CESS
-Repeat the HFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-1L, S-2L, S-6L to
S-12L, S-14L, S-15L and S-17L
for any crack.
CONDITION 3: NO
CRACK FOUND DUR-
ING THE HFEC INSPEC-
TION OF STRINGER
SIDEWALLS AND THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-1L, S-2L, S-6L
TO S-12L, S-14L, S-15L
AND S-17L
-FIGURE 2
--CONDITION 4 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 4: ANY
CRACK FOUND DUR-
ING THE HFEC INSPEC-
TION OF STRINGER
SIDEWALLS OR THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-1L, S-2L, S-6L
TO S-12L, S-14L, S-15L
AND S-17L
Do PART 2: CLOSE AC-
CESS
-
Do PART 2: CLOSE AC-
CESS
-CONDITION 4 (ACTION 2):
Repeat the HFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-1L, S-2L, S-6L to
S-12L, S-14L, S-15L and S-17L
for any crack.
-FIGURE 2
Do PART 2: CLOSE AC-
CESS
-Repeat the detailed inspection
of stringer assemblies S-18L to
S-25L, S-34L, S-36L, S-38L, S-
40L, S-42L, S-44L, S-46L and
S-48L to S-51L for any crack.
CONDITION 5: NO
CRACK FOUND DUR-
ING THE DETAILED IN-
SPECTION OF
STRINGER ASSEM-
BLIES S-18L TO S-25L,
S-34L, S-36L, S-38L, S-
40L, S-42L, S-44L, S-46L
AND S-48L TO S-51L
-FIGURE 3
--CONDITION 6 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 6: ANY
CRACK FOUND DUR-
ING THE DETAILED IN-
SPECTION OF
STRINGER ASSEM-
BLIES S-18L TO S-25L,
S-34L, S-36L, S-38L, S-
40L, S-42L, S-44L, S-46L
AND S-48L TO S-51L
Do PART 2: CLOSE AC-
CESS
-
Do PART 2: CLOSE AC-
CESS
-CONDITION 6 (ACTION 2):
Repeat the detailed inspection
of stringer assemblies S-18L to
S-25L, S-34L, S-36L, S-38L, S-
40L, S-42L, S-44L, S-46L and
S-48L to S-51L for any crack.
-FIGURE 3
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
24 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 25

Group 1:
Table 2: Right side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA)
2360
Refer to the listed proce-
dures in SB 747-53A2910
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of Compli-
ance
ActionCondition
Do PART 1: OPEN ACCESS-ACTION 1: Do a LFEC inspec-
tion of stringer sidewalls and a
detailed inspection of stringer
assemblies S-3R to S-5R for
any crack.
All Airplanes.
-FIGURE 4
-FIGURE 5ACTION 2: Do a HFEC inspec-
tion of stringer sidewalls and a
detailed inspection of stringer
assemblies S-1R, S-2R, S-6R
to S-12R, S-14R, S-15R and
S-17R for any crack.
-FIGURE 6ACTION 3: Do a detailed in-
spection of stringer assemblies
S-18R to S-25R, S-34R, S-
36R, S-38R, S-40R, S-42R, S-
44R, S-46R and S-48R to S-
51R for any crack.
Do PART 2: CLOSE AC-
CESS
-Repeat the LFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-3R to S-5R for any
crack.
CONDITION 7: NO
CRACK FOUND DUR-
ING THE LFEC INSPEC-
TION OF STRINGER
SIDEWALLS AND THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-3R TO S-5R
-FIGURE 4
--CONDITION 8 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 8: ANY
CRACK FOUND DUR-
ING THE LFEC INSPEC-
TION OF STRINGER
SIDEWALLS OR THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-3R TO S-5R
Do PART 2: CLOSE AC-
CESS
-
Do PART 2: CLOSE AC-
CESS
-CONDITION 8 (ACTION 2):
Repeat the LFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-3R to S-5R for any
crack.
-FIGURE 4
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
25 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 26

Group 1:
Table 2: Right side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA)
2360
Refer to the listed proce-
dures in SB 747-53A2910
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of Compli-
ance
ActionCondition
Do PART 2: CLOSE AC-
CESS
-Repeat the HFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-1R, S-2R, S-6R to
S-12R, S-14R, S-15R and S-
17R for any crack.
CONDITION 9: NO
CRACK FOUND DUR-
ING THE HFEC INSPEC-
TION OF STRINGER
SIDEWALLS AND THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-1R, S-2R, S-6R
TO S-12R, S-14R, S-15R
AND S-17R
-FIGURE 5
--CONDITION 10 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 10: ANY
CRACK FOUND DUR-
ING THE HFEC INSPEC-
TION OF STRINGER
SIDEWALLS OR THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-1R, S-2R, S-6R
TO S-12R, S-14R, S-15R
AND S-17R
Do PART 2: CLOSE AC-
CESS
-
Do PART 2: CLOSE AC-
CESS
-CONDITION 10 (ACTION 2):
Repeat the HFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-1R, S-2R, S-6R to
S-12R, S-14R, S-15R and S-
17R for any crack.
-FIGURE 5
Do PART 2: CLOSE AC-
CESS
-Repeat the detailed inspection
of stringer assemblies S-18R
to S-25R, S-34R, S-36R, S-
38R, S-40R, S-42R, S-44R, S-
46R and S-48R to S-51R for
any crack.
CONDITION 11: NO
CRACK FOUND DUR-
ING THE DETAILED IN-
SPECTION OF
STRINGER ASSEM-
BLIES S-18R TO S-25R,
S-34R, S-36R, S-38R, S-
40R, S-42R, S-44R, S-
46R AND S-48R TO S-
51R
-FIGURE 6
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
26 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 27

Group 1:
Table 2: Right side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA)
2360
Refer to the listed proce-
dures in SB 747-53A2910
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of Compli-
ance
ActionCondition
--CONDITION 12 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 12: ANY
CRACK FOUND DUR-
ING THE DETAILED IN-
SPECTION OF
STRINGER ASSEM-
BLIES S-18R TO S-25R,
S-34R, S-36R, S-38R, S-
40R, S-42R, S-44R, S-
46R AND S-48R TO S-
51R
Do PART 2: CLOSE AC-
CESS
-
Do PART 2: CLOSE AC-
CESS
-CONDITION 12 (ACTION 2):
Repeat the detailed inspection
of stringer assemblies S-18R
to S-25R, S-34R, S-36R, S-
38R, S-40R, S-42R, S-44R, S-
46R and S-48R to S-51R for
any crack.
-FIGURE 6
Group 2:
Table 3: Left side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA) 2360
Refer to the listed proce-
dures in SB 747-53A2910
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of Compli-
ance
ActionCondition
Do PART 1: OPEN ACCESS-ACTION 1: Do a Low Frequen-
cy Eddy Current (LFEC) inspec-
tion of stringer sidewalls and a
detailed inspection of stringer
assemblies S-3L to S-5L and
S-13L to S-17L for any crack.
All Airplanes.
-FIGURE 7
-FIGURE 8ACTION 2: Do a High Frequen-
cy Eddy Current (HFEC) inspec-
tion of stringer sidewalls and a
detailed inspection of stringer
assemblies S-1L, S-2L and S-
6L to S-12L for any crack.
-FIGURE 9ACTION 3: Do a detailed in-
spection of stringer assemblies
S-18L to S-25L, S-34L, S-36L,
S-38L, S-40L, S-42L, S-44L, S-
46L and S-48L to S-51L for any
crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
27 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 28

Group 2:
Table 3: Left side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA) 2360
Refer to the listed proce-
dures in SB 747-53A2910
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of Compli-
ance
ActionCondition
Do PART 2: CLOSE AC-
CESS
-Repeat the LFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-3L to S-5L and S-
13L to S-17L for any crack.
CONDITION 13: NO
CRACK FOUND DUR-
ING THE LFEC INSPEC-
TION OF STRINGER
SIDEWALLS AND THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-3L TO S-5L
AND S-13L TO S-17L
-FIGURE 7
--CONDITION 14 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 14: ANY
CRACK FOUND DUR-
ING THE LFEC INSPEC-
TION OF STRINGER
SIDEWALLS OR THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-3L TO S-5L
AND S-13L TO S-17L
Do PART 2: CLOSE AC-
CESS
-
Do PART 2: CLOSE AC-
CESS
-CONDITION 14 (ACTION 2):
Repeat the LFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-3L to S-5L and S-
13L to S-17L for any crack.
-FIGURE 7
Do PART 2: CLOSE AC-
CESS
-Repeat the HFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-1L, S-2L and S-6L
to S-12L for any crack.
CONDITION 15: NO
CRACK FOUND DUR-
ING THE HFEC INSPEC-
TION OF STRINGER
SIDEWALLS AND THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-1L, S-2L AND
S-6L TO S-12L
-FIGURE 8
--CONDITION 16 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 16: ANY
CRACK FOUND DUR-
ING THE HFEC INSPEC-
TION OF STRINGER
SIDEWALLS OR THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-1L, S-2L AND
S-6L TO S-12L
Do PART 2: CLOSE AC-
CESS
-
Do PART 2: CLOSE AC-
CESS
-CONDITION 16 (ACTION 2):
Repeat the HFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-1L, S-2L and S-6L
to S-12L for any crack.
-FIGURE 8
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
28 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 29

Group 2:
Table 3: Left side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA) 2360
Refer to the listed proce-
dures in SB 747-53A2910
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of Compli-
ance
ActionCondition
Do PART 2: CLOSE AC-
CESS
-Repeat the detailed inspection
of stringer assemblies S-18L to
S-25L, S-34L, S-36L, S-38L, S-
40L, S-42L, S-44L, S-46L and
S-48L to S-51L for any crack.
CONDITION 17: NO
CRACK FOUND DUR-
ING THE DETAILED IN-
SPECTION OF
STRINGER ASSEM-
BLIES S-18L TO S-25L,
S-34L, S-36L, S-38L, S-
40L, S-42L, S-44L, S-46L
AND S-48L TO S-51L
-FIGURE 9
--CONDITION 18 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 18: ANY
CRACK FOUND DUR-
ING THE DETAILED IN-
SPECTION OF
STRINGER ASSEM-
BLIES S-18L TO S-25L,
S-34L, S-36L, S-38L, S-
40L, S-42L, S-44L, S-46L
AND S-48L TO S-51L
Do PART 2: CLOSE AC-
CESS
-
Do PART 2: CLOSE AC-
CESS
-CONDITION 18 (ACTION 2):
Repeat the detailed inspection
of stringer assemblies S-18L to
S-25L, S-34L, S-36L, S-38L, S-
40L, S-42L, S-44L, S-46L and
S-48L to S-51L for any crack.
-FIGURE 9
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
29 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 30

Group 2:
Table 4: Right side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA)
2360
Refer to the listed proce-
dures in SB 747-53A2910
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of Compli-
ance
ActionCondition
Do PART 1: OPEN ACCESS-ACTION 1: Do a LFEC inspec-
tion of stringer sidewalls and a
detailed inspection of stringer
assemblies S-3R to S-5R and
S-13R to S-17R for any crack.
All Airplanes.
-FIGURE 10
-FIGURE 11ACTION 2: Do a HFEC inspec-
tion of stringer sidewalls and a
detailed inspection of stringer
assemblies S-1R, S-2R and S-
6R to S-12R for any crack.
-FIGURE 12ACTION 3: Do a detailed in-
spection of stringer assemblies
S-18R to S-25R, S-34R, S-
36R, S-38R, S-40R, S-42R, S-
44R, S-46R, and S-48R to S-
51R for any crack.
Do PART 2: CLOSE AC-
CESS
-Repeat the LFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-3R to S-5R and S-
13R to S-17R for any crack.
CONDITION 19: NO
CRACK FOUND DUR-
ING THE LFEC INSPEC-
TION OF STRINGER
SIDEWALLS AND THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-3R TO S-5R
AND S-13R TO S-17R
-FIGURE 10
--CONDITION 20 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 20: ANY
CRACK FOUND DUR-
ING THE LFEC INSPEC-
TION OF STRINGER
SIDEWALLS OR THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-3R TO S-5R
AND S-13R TO S-17R
Do PART 2: CLOSE AC-
CESS
-
Do PART 2: CLOSE AC-
CESS
-CONDITION 20 (ACTION 2):
Repeat the LFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-3R to S-5R and S-
13R to S-17R for any crack.
-FIGURE 10
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
30 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 31

Group 2:
Table 4: Right side, Inspection of Stringers Forward of the Pressure Bulkhead at Body Station (STA)
2360
Refer to the listed proce-
dures in SB 747-53A2910
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of Compli-
ance
ActionCondition
Do PART 2: CLOSE AC-
CESS
-Repeat the HFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-1R, S-2R and S-6R
to S-12R for any crack.
CONDITION 21: NO
CRACK FOUND DUR-
ING THE HFEC INSPEC-
TION OF STRINGER
SIDEWALLS AND THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-1R, S-2R AND
S-6R TO S-12R
-FIGURE 11
--CONDITION 22 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 22: ANY
CRACK FOUND DUR-
ING THE HFEC INSPEC-
TION OF STRINGER
SIDEWALLS OR THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-1R, S-2R AND
S-6R TO S-12R
Do PART 2: CLOSE AC-
CESS
-
Do PART 2: CLOSE AC-
CESS
-CONDITION 22 (ACTION 2):
Repeat the HFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-1R, S-2R and S-6R
to S-12R for any crack.
-FIGURE 11
Do PART 2: CLOSE AC-
CESS
-Repeat the detailed inspection
of stringer assemblies S-18R
to S-25R, S-34R, S-36R, S-
38R, S-40R, S-42R, S-44R, S-
46R, and S-48R to S-51R for
any crack.
CONDITION 23: NO
CRACK FOUND DUR-
ING THE DETAILED IN-
SPECTION OF
STRINGER ASSEM-
BLIES S-18R TO S-25R,
S-34R, S-36R, S-38R, S-
40R, S-42R, S-44R, S-
46R AND S-48R TO S-
51R
-FIGURE 12
--CONDITION 24 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 24: ANY
CRACK FOUND DUR-
ING THE DETAILED IN-
SPECTION OF
STRINGER ASSEM-
BLIES S-18R TO S-25R,
S-34R, S-36R, S-38R, S-
40R, S-42R, S-44R, S-
46R AND S-48R TO S-
51R
Do PART 2: CLOSE AC-
CESS
-
Do PART 2: CLOSE AC-
CESS
-CONDITION 24 (ACTION 2):
Repeat the detailed inspection
of stringer assemblies S-18R
to S-25R, S-34R, S-36R, S-
38R, S-40R, S-42R, S-44R, S-
46R, and S-48R to S-51R for
any crack.
-FIGURE 12
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
31 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 32

Table 5: Left side, Inspection of Stringers Aft of the Pressure Bulkhead at Body Station (STA) 2360
Refer to the listed proce-
dures in SB 747-53A2910
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of Compli-
ance
ActionCondition
Do PART 1: OPEN ACCESS-ACTION 1: Do a HFEC inspec-
tion of stringer sidewalls and a
detailed inspection of stringer
assemblies S-1L to S-3L for
any crack.
All Airplanes.
-FIGURE 13
-FIGURE 14ACTION 2: Do a detailed in-
spection of stringer assemblies
S-4L to S-10L, S-12L to S-16L,
S-18L to S-22L, S-24L to S-
26L, S-34L, S-36L, S-38L, S-
40L, S-42L, S-44L, S-46L and
S-48L to S-51L for any crack.
Do PART 2: CLOSE AC-
CESS
-Repeat the HFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-1L to S-3L for any
crack.
CONDITION 25: NO
CRACK FOUND DUR-
ING THE HFEC INSPEC-
TION OF STRINGER
SIDEWALLS AND THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-1L TO S-3L
-FIGURE 13
--CONDITION 26 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 26: ANY
CRACK FOUND DUR-
ING THE HFEC INSPEC-
TION OF STRINGER
SIDEWALLS OR THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-1L TO S-3L
Do PART 2: CLOSE AC-
CESS
-
Do PART 2: CLOSE AC-
CESS
-CONDITION 26 (ACTION 2):
Repeat the HFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-1L to S-3L for any
crack.
-FIGURE 13
Do PART 2: CLOSE AC-
CESS
-Repeat the detailed inspection
of stringer assemblies S-4L to
S-10L, S-12L to S-16L, S-18L
to S-22L, S-24L to S-26L, S-
34L, S-36L, S-38L, S-40L, S-
42L, S-44L, S-46L and S-48L
to S-51L for any crack.
CONDITION 27: NO
CRACK FOUND DUR-
ING THE DETAILED IN-
SPECTION OF
STRINGER ASSEM-
BLIES S-4L TO S-10L,
S-12L TO S-16L, S-18L
TO S-22L, S-24L TO S-
26L, S-34L, S-36L, S-
38L, S-40L, S-42L, S-
44L, S-46L AND S-48L
TO S-51L
-FIGURE 14
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
32 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 33

Table 5: Left side, Inspection of Stringers Aft of the Pressure Bulkhead at Body Station (STA) 2360
Refer to the listed proce-
dures in SB 747-53A2910
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of Compli-
ance
ActionCondition
--CONDITION 28 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 28: ANY
CRACK FOUND DUR-
ING THE DETAILED IN-
SPECTION OF
STRINGER ASSEM-
BLIES S-4L TO S-10L,
S-12L TO S-16L, S-18L
TO S-22L, S-24L TO S-
26L, S-34L, S-36L, S-
38L, S-40L, S-42L, S-
44L, S-46L AND S-48L
TO S-51L
Do PART 2: CLOSE AC-
CESS
-
Do PART 2: CLOSE AC-
CESS
-CONDITION 28 (ACTION 2):
Repeat the detailed inspection
of stringer assemblies S-4L to
S-10L, S-12L to S-16L, S-18L
to S-22L, S-24L to S-26L, S-
34L, S-36L, S-38L, S-40L, S-
42L, S-44L, S-46L and S-48L
to S-51L for any crack.
-FIGURE 14
Table 6: Right side, Inspection of Stringers Aft of the Pressure Bulkhead at Body Station (STA) 2360
Refer to the listed proce-
dures in SB 747-53A2910
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of Compli-
ance
ActionCondition
Do PART 1: OPEN ACCESS-ACTION 1: Do a HFEC inspec-
tion of stringer sidewalls and a
detailed inspection of stringer
assemblies S-1R to S-3R for
any crack.
All Airplanes.
-FIGURE 15
-FIGURE 16ACTION 2: Do a detailed in-
spection of stringer assemblies
S-4R to S-10R, S-12R to S-
16R, S-18R to S-22R, S-24R
to S-26R, S-34R, S-36R, S-
38R, S-40R, S-42R, S-44R, S-
46R and S-48R to S-51R for
any crack.
Do PART 2: CLOSE AC-
CESS
-Repeat the HFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-1R to S-3R for any
crack.
CONDITION 29: NO
CRACK FOUND DUR-
ING THE HFEC INSPEC-
TION OF STRINGER
SIDEWALLS AND THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-1R TO S-3R
-FIGURE 15
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
33 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 34

Table 6: Right side, Inspection of Stringers Aft of the Pressure Bulkhead at Body Station (STA) 2360
Refer to the listed proce-
dures in SB 747-53A2910
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of Compli-
ance
ActionCondition
--CONDITION 30 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 30: ANY
CRACK FOUND DUR-
ING THE HFEC INSPEC-
TION OF STRINGER
SIDEWALLS OR THE
DETAILED INSPECTION
OF STRINGER ASSEM-
BLIES S-1R TO S-3R
Do PART 2: CLOSE AC-
CESS
-
Do PART 2: CLOSE AC-
CESS
-CONDITION 30 (ACTION 2):
Repeat the HFEC inspection of
stringer sidewalls and the de-
tailed inspection of stringer as-
semblies S-1R to S-3R for any
crack.
-FIGURE 15
Do PART 2: CLOSE AC-
CESS
-Repeat the detailed inspection
of stringer assemblies S-4R to
S-10R, S-12R to S-16R, S-18R
to S-22R, S-24R to S-26R, S-
34R, S-36R, S-38R, S-40R, S-
42R, S-44R, S-46R and S-48R
to S-51R for any crack.
CONDITION 31: NO
CRACK FOUND DUR-
ING THE DETAILED IN-
SPECTION OF
STRINGER ASSEM-
BLIES S-4R TO S-10R,
S-12R TO S-16R, S-18R
TO S-22R, S-24R TO S-
26R, S-34R, S-36R, S-
38R, S-40R, S-42R, S-
44R, S-46R AND S-48R
TO S-51R
-FIGURE 16
--CONDITION 32 (ACTION 1):
Contact The Boeing Company
for repair instructions and do
the repair.
CONDITION 32: ANY
CRACK FOUND DUR-
ING THE DETAILED IN-
SPECTION OF
STRINGER ASSEM-
BLIES S-4R TO S-10R,
S-12R TO S-16R, S-18R
TO S-22R, S-24R TO S-
26R, S-34R, S-36R, S-
38R, S-40R, S-42R, S-
44R, S-46R AND S-48R
TO S-51R
Do PART 2: CLOSE AC-
CESS
-
Do PART 2: CLOSE AC-
CESS
-CONDITION 32 (ACTION 2):
Repeat the detailed inspection
of stringer assemblies S-4R to
S-10R, S-12R to S-16R, S-18R
to S-22R, S-24R to S-26R, S-
34R, S-36R, S-38R, S-40R, S-
42R, S-44R, S-46R and S-48R
to S-51R.
-FIGURE 16
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
34 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 35

This Figure applies only to: Group 1.
FIGURE 1: LEFT SIDE - STRINGER ASSEMBLIES S-3L TO S-5L, FORWARD OF THE PRESSURE
BULKHEAD AT STA 2360 - INSPECTION
(SHEET 1 OF 5)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
35 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 36

FIGURE 1: LEFT SIDE - STRINGER ASSEMBLIES S-3L TO S-5L, FORWARD OF THE PRESSURE
BULKHEAD AT STA 2360 - INSPECTION
(SHEET 2 OF 5)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
36 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 37

FIGURE 1: LEFT SIDE - STRINGER ASSEMBLIES S-3L TO S-5L, FORWARD OF THE PRESSURE
BULKHEAD AT STA 2360 - INSPECTION
(SHEET 3 OF 5)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
37 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 38 (OCR)

REQUIREMENTS BULLETIN 747-53A2910
ALERT  ALERT
EDGE OF  STRINGER  TYPICAL  CRACK  SKIN  EDGE OF  END FITTING
FWD  STRINGER
END FITTING
TYPICAL
B-B
END FITTING  EDGE OF  SKIN  TYPICAL  CRACK  EDGE OF  STRINGER
FWD
STRINGER
TYPICAL  END FITTING
C-C
LOW FREQUENCY EDDY CURRENT  3008775
(LFEC) INSPECTION AREA
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
Step  Task  Name  Identification  Qty  More Data
1  Inspect  S-3L, STA 2360  1  (a)
Inspect  S-4L, STA 2360  1  (a)
Inspect  S-5L, STA 2360  1  (a)
FIGURE 1: LEFT SIDE - STRINGER ASSEMBLIES S-3L TO S-5L, FORWARD OF THE PRESSURE
BULKHEAD AT STA 2360 - INSPECTION
(SHEET 4 OF 5)
Original Issue: September 21, 2022
Export Controlled ECCN: 9E991  747-53A2910 RB
Copyright © Unpublished Work - See page 1 for details.  38 of 108

### Page 39

More DataQtyIdentificationNameTaskStep
(b)1-S-3L, STA 2360Inspect2
(b)1-S-4L, STA 2360Inspect
(b)1-S-5L, STA 2360Inspect
(a) Do a Low Frequency Eddy Current (LFEC) inspection of stringer sidewalls common to the end fitting for
any crack in accordance with 747 NDT Manual Part 6, 51-00-26.
(b) Do a detailed inspection of the visible areas of the stringer and end fitting for any crack.
FIGURE 1: LEFT SIDE - STRINGER ASSEMBLIES S-3L TO S-5L, FORWARD OF THE PRESSURE
BULKHEAD AT STA 2360 - INSPECTION
(SHEET 5 OF 5)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
39 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 40 (OCR)

REQUIREMENTS BULLETIN 747-53A2910
ALERT  ALERT
This Figure applies only to: Group 1.
STA
2360
BLO
S-1L
S-2L
S-3L
S-4L
S-5L
S-6L
S-7L
S-8L
S-9L
S-10L
S-11L
S-12L
S-13L
S-14L
S-15L
S-16L
S-17L
S-18L
S-19L
VIEW LOOKING INBOARD
3002130
FIGURE 2: LEFT SIDE - STRINGER ASSEMBLIES S-1L, S-2L, S-6L TO S-12L, S-14L, S-15L AND S-17L,
FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION
(SHEET 1 OF 5)
Original Issue: September 21, 2022
Export Controlled ECCN: 9E991  747-53A2910 RB
Copyright © Unpublished Work - See page 1 for details.  40 of 108

### Page 41 (OCR)

REQUIREMENTS BULLETIN 747-53A2910
ALERT  ALERT
-SKIN
FRAME
ASSEMBLY
STA
2360
STRINGER
END FITTING
TYPICAL
(VIEW LOOKING OUTBOARD
(PRESSURE BULKHEAD NOT SHOWN FOR CLARITY
\ DETAILED INSPECTION AREA  3002138
FIGURE 2: LEFT SIDE - STRINGER ASSEMBLIES S-1L, S-2L, S-6L TO S-12L, S-14L, S-15L AND S-17L,
FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION
(SHEET 2 OF 5)
Original Issue: September 21, 2022
747-53A2910 RB
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  41 of 108

### Page 42

FIGURE 2: LEFT SIDE - STRINGER ASSEMBLIES S-1L, S-2L, S-6L TO S-12L, S-14L, S-15L AND S-17L,
FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION
(SHEET 3 OF 5)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
42 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 43 (OCR)

REQUIREMENTS BULLETIN 747-53A2910
ALERT  ALERT
STRINGER  EDGE OF  TYPICAL  CRACK  SKIN  EDGE OF  END FITTING
FWD
STRINGER
END FITTING
TYPICAL
B-B
EDGE OF  END FITTING  SKIN  CRACK  TYPICAL  STRINGER  EDGE OF
FWD
STRINGER
TYPICAL  END FITTING
HIGH FREQUENCY EDDY CURRENT  C-C  3008807
(HFEC) INSPECTION AREA
FIGURE 2: LEFT SIDE - STRINGER ASSEMBLIES S-1L, S-2L, S-6L TO S-12L, S-14L, S-15L AND S-17L,
FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION
(SHEET 4 OF 5)
Original Issue: September 21, 2022
747-53A2910 RB
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  43 of 108

### Page 44

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1-S-1L, STA 2360Inspect1
(a)1-S-2L, STA 2360Inspect
(a)1-S-6L, STA 2360Inspect
(a)1-S-7L, STA 2360Inspect
(a)1-S-8L, STA 2360Inspect
(a)1-S-9L, STA 2360Inspect
(a)1-S-10L, STA 2360Inspect
(a)1-S-11L, STA 2360Inspect
(a)1-S-12L, STA 2360Inspect
(a)1-S-14L, STA 2360Inspect
(a)1-S-15L, STA 2360Inspect
(a)1-S-17L, STA 2360Inspect
(b)1-S-1L, STA 2360Inspect2
(b)1-S-2L, STA 2360Inspect
(b)1-S-6L, STA 2360Inspect
(b)1-S-7L, STA 2360Inspect
(b)1-S-8L, STA 2360Inspect
(b)1-S-9L, STA 2360Inspect
(b)1-S-10L, STA 2360Inspect
(b)1-S-11L, STA 2360Inspect
(b)1-S-12L, STA 2360Inspect
(b)1-S-14L, STA 2360Inspect
(b)1-S-15L, STA 2360Inspect
(b)1-S-17L, STA 2360Inspect
(a) Do a High Frequency Eddy Current (HFEC) inspection of stringer sidewalls common to the end fitting for
any crack, in accordance with 747 NDT Manual Part 6, 51-00-00, Procedure 4 or 23.
(b) Do a detailed inspection of the visible areas of the stringer and end fitting for any crack.
FIGURE 2: LEFT SIDE - STRINGER ASSEMBLIES S-1L, S-2L, S-6L TO S-12L, S-14L, S-15L AND S-17L,
FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION
(SHEET 5 OF 5)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
44 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 45 (OCR)

REQUIREMENTS BULLETIN 747-53A2910
ALERT  ALERT
This Figure applies only to: Group 1.
STA
2360
S-16L
S-17L -
S-18L
S-19L -
S-20L
S-21L -
S-22L
S-23L -
S-24L
S-25L -
S-26L
S-34L -
S-36L
S-38L
S-40L
S-42L -
S-44L
S-46L -
S-48L
S-49L
S-50L
S-51L
VIEW LOOKING INBOARD
•WD
FIGURE 3: LEFT SIDE - STRINGER ASSEMBLIES S-18L TO S-25L, S-34L, S-36L, S-38L, S-40L, S-42L,
S-44L, S-46L AND S-48L TO S-51L, FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION
(SHEET 1 OF 4)
Original Issue: September 21, 2022
747-53A2910 RB
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  45 of 108

### Page 46 (OCR)

REQUIREMENTS BULLETIN 747-53A2910
ALERT  ALERT
SKIN
FRAME
ASSEMBLY
STA
2360
END FITTING
STRINGER
TYPICAL
(VIEW LOOKING OUTBOARD)
(PRESSURE BULKHEAD NOT SHOWN FOR CLARITY
END FITTING  - SKIN
SPACER
FRAME
ASSEMBLY
DETAILED INSPECTION AREA  A-A  3002247
FIGURE 3: LEFT SIDE - STRINGER ASSEMBLIES S-18L TO S-25L, S-34L, S-36L, S-38L, S-40L, S-42L,
S-44L, S-46L AND S-48L TO S-51L, FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION
(SHEET 2 OF 4)
Original Issue: September 21, 2022
747-53A2910 RB
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  46 of 108

### Page 47 (OCR)

REQUIREMENTS BULLETIN 747-53A2910
ALERT  ALERT
STA
2360
SKIN
FRAME
ASSEMBLY
STRINGER
SPLICE
S-34L
STRINGER S-34L
B  STRINGER
• SPLICE
FRAME
ASSEMBLY
RADIUS  SKIN
] DETAILED INSPECTION  B-B  FILLER
AREA
FIGURE 3: LEFT SIDE - STRINGER ASSEMBLIES S-18L TO S-25L, S-34L, S-36L, S-38L, S-40L, S-42L,
S-44L, S-46L AND S-48L TO S-51L, FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION
(SHEET 3 OF 4)
Original Issue: September 21, 2022
747-53A2910 RB
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  47 of 108

### Page 48

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1-S-18L, STA 2360Inspect1
(a)1-S-19L, STA 2360Inspect
(a)1-S-20L, STA 2360Inspect
(a)1-S-21L, STA 2360Inspect
(a)1-S-22L, STA 2360Inspect
(a)1-S-23L, STA 2360Inspect
(a)1-S-24L, STA 2360Inspect
(a)1-S-25L, STA 2360Inspect
(b)1-S-34L, STA 2360Inspect
(a)1-S-36L, STA 2360Inspect
(a)1-S-38L, STA 2360Inspect
(a)1-S-40L, STA 2360Inspect
(a)1-S-42L, STA 2360Inspect
(a)1-S-44L, STA 2360Inspect
(a)1-S-46L, STA 2360Inspect
(a)1-S-48L, STA 2360Inspect
(a)1-S-49L, STA 2360Inspect
(a)1-S-50L, STA 2360Inspect
(a)1-S-51L, STA 2360Inspect
(a) Do a detailed inspection of the visible areas of the stringer and end fitting for any crack.
(b) Do a detailed inspection of the visible areas of the stringer and stringer splice, for any crack.
FIGURE 3: LEFT SIDE - STRINGER ASSEMBLIES S-18L TO S-25L, S-34L, S-36L, S-38L, S-40L, S-42L,
S-44L, S-46L AND S-48L TO S-51L, FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION
(SHEET 4 OF 4)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
48 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 49 (OCR)

REQUIREMENTS BULLETIN 747-53A2910C
ALERT  ALERT
This Figure applies only to: Group 1.
STA
2360
BLO
• S- 1R
- S-2R
• S-3R
- S-4R
• S-5R
- S-6R
• S-7R
- S-8R
VIEW LOOKING INBOARD
FWD
3002125
FIGURE 4: RIGHT SIDE - STRINGER ASSEMBLIES S-3R TO S-5R, FORWARD OF THE PRESSURE
BULKHEAD AT STA 2360 - INSPECTION
(SHEET 1 OF 5)
Original Issue: September 21, 2022
Export Controlled ECCN: 9E991  747-53A2910 RB
Copyright © Unpublished Work - See page 1 for details.  49 of 108

### Page 50

FIGURE 4: RIGHT SIDE - STRINGER ASSEMBLIES S-3R TO S-5R, FORWARD OF THE PRESSURE
BULKHEAD AT STA 2360 - INSPECTION
(SHEET 2 OF 5)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
50 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 51

FIGURE 4: RIGHT SIDE - STRINGER ASSEMBLIES S-3R TO S-5R, FORWARD OF THE PRESSURE
BULKHEAD AT STA 2360 - INSPECTION
(SHEET 3 OF 5)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
51 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 52 (OCR)

REQUIREMENTS BULLETIN 747-53A2910
ALERT  ALERT
STRINGER  EDGE OF  TYPICAL  CRACK  SKIN  EDGE OF  END FITTING
FWD
STRINGER
END FITTING  TYPICAL
B-B
EDGE OF  END FITTING  SKIN  TYPICAL  CRACK  EDGE OF  STRINGER
STRINGER  FWD
END FITTING
TYPICAL
LOW FREQUENCY EDDY CURRENT  C-C  3008810
(LFEC) INSPECTION AREA
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
Step  Task  Name  Identification  Qty  More Data
Inspect  S-3R, STA 2360  1  (a)
Inspect  S-4R, STA 2360  1  (a)
Inspect  S-5R, STA 2360  1  (a)
2  Inspect  S-3R, STA 2360  1  (b)
Inspect  S-4R, STA 2360  1  (b)
Inspect  S-5R, STA 2360  1  (b)
FIGURE 4: RIGHT SIDE - STRINGER ASSEMBLIES S-3R TO S-5R, FORWARD OF THE PRESSURE
BULKHEAD AT STA 2360 - INSPECTION
(SHEET 4 OF 5)
Original Issue: September 21, 2022
Export Controlled ECCN: 9E991  747-53A2910 RB
Copyright © Unpublished Work - See page 1 for details.  52 of 108

### Page 53

More DataQtyIdentificationNameTaskStep
(a) Do a Low Frequency Eddy Current (LFEC) inspection of stringer sidewalls common to the end fitting for
any crack in accordance with 747 NDT Manual Part 6, 51-00-26.
(b) Do a detailed inspection of the visible areas of the stringer and end fitting for any crack.
FIGURE 4: RIGHT SIDE - STRINGER ASSEMBLIES S-3R TO S-5R, FORWARD OF THE PRESSURE
BULKHEAD AT STA 2360 - INSPECTION
(SHEET 5 OF 5)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
53 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 54 (OCR)

REQUIREMENTS BULLETIN 747-53A2910
ALERT  ALERT
This Figure applies only to: Group 1.
STA
2360
STA
2360
• BLO
- S-1R
- S-2R
- S-3R
S-4R
S-5R
- S-6R
- S-7R
S-8R
• S-9R
S-10R
• S-11R
- S-12R
S-13R
- S-14R
- S-15R
• S-16R
- S-17R
- S-18R
- S-19R
VIEW LOOKING INBOARD
FWD
3002131
FIGURE 5: RIGHT SIDE - STRINGER ASSEMBLIES S-1R, S-2R, S-6R TO S-12R, S-14R, S-15R AND S-17R,
FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION
(SHEET 1 OF 5)
Original Issue: September 21, 2022
747-53A2910 RB
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  54 of 108

### Page 55

FIGURE 5: RIGHT SIDE - STRINGER ASSEMBLIES S-1R, S-2R, S-6R TO S-12R, S-14R, S-15R AND S-17R,
FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION
(SHEET 2 OF 5)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
55 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 56

FIGURE 5: RIGHT SIDE - STRINGER ASSEMBLIES S-1R, S-2R, S-6R TO S-12R, S-14R, S-15R AND S-17R,
FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION
(SHEET 3 OF 5)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
56 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 57 (OCR)

REQUIREMENTS BULLETIN 747-53A2910
ALERT  ALERT
EDGE OF  STRINGER  TYPICAL  CRACK  SKIN  EDGE OF  END FITTING
_ FWD
STRINGER
END FITTING  TYPICAL
B-B
EDGE OF  END FITTING  SKIN  CRACK  TYPICAL  EDGE OF  STRINGER
FWD
STRINGER
TYPICAL  END FITTING
| HIGH FREQUENCY EDDY CURRENT  C-C
(HFEC) INSPECTION AREA
FIGURE 5: RIGHT SIDE - STRINGER ASSEMBLIES S-1R, S-2R, S-6R TO S-12R, S-14R, S-15R AND S-17R,
FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION
(SHEET 4 OF 5)
Original Issue: September 21, 2022
747-53A2910 RB
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  57 of 108

### Page 58

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)1-S-1R, STA 2360Inspect1
(a)1-S-2R, STA 2360Inspect
(a)1-S-6R, STA 2360Inspect
(a)1-S-7R, STA 2360Inspect
(a)1-S-8R, STA 2360Inspect
(a)1-S-9R, STA 2360Inspect
(a)1-S-10R, STA 2360Inspect
(a)1-S-11R, STA 2360Inspect
(a)1-S-12R, STA 2360Inspect
(a)1-S-14R, STA 2360Inspect
(a)1-S-15R, STA 2360Inspect
(a)1-S-17R, STA 2360Inspect
(b)1-S-1R, STA 2360Inspect2
(b)1-S-2R, STA 2360Inspect
(b)1-S-6R, STA 2360Inspect
(b)1-S-7R, STA 2360Inspect
(b)1-S-8R, STA 2360Inspect
(b)1-S-9R, STA 2360Inspect
(b)1-S-10R, STA 2360Inspect
(b)1-S-11R, STA 2360Inspect
(b)1-S-12R, STA 2360Inspect
(b)1-S-14R, STA 2360Inspect
(b)1-S-15R, STA 2360Inspect
(b)1-S-17R, STA 2360Inspect
(a) Do a High Frequency Eddy Current (HFEC) inspection of stringer sidewalls common to the end fitting for
any crack, in accordance with 747 NDT Manual Part 6, 51-00-00, Procedure 4 or 23.
(b) Do a detailed inspection of the visible areas of the stringer and end fitting for any crack.
FIGURE 5: RIGHT SIDE - STRINGER ASSEMBLIES S-1R, S-2R, S-6R TO S-12R, S-14R, S-15R AND S-17R,
FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 - INSPECTION
(SHEET 5 OF 5)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 21, 2022
747-53A2910 RB
58 of 108
REQUIREMENTS BULLETIN 747-53A2910
ALERTALERT

### Page 59 (OCR)

REQUIREMENTS BULLETIN 747-53A2910
ALERT  ALERT
This Figure applies only to: Group 1.
STA
2360
STA
2360
• S-16R
S-17R
- S-18R
S-19R
S-20R
S-21R
- S-22R
S-23R
S-24R
S-25R
S-26R
B  S-34R
S-36R
S-38R
S-40R
S-42R
S-44R
S-46R
S-48R
S-49R
• S-50R
S-51R
VIEW LOOKING INBOARD
FWD  3002225
FIGURE 6: RIGHT SIDE - STRINGER ASSEMBLIES S-18R TO S-25R, S-34R, S-36R, S-38R, S-40R, S-42R,
S-44R, S-46R AND S-48R TO S-51R, FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 -
INSPECTION
(SHEET 1 OF 4)
Original Issue: September 21, 2022
747-53A2910 RB
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.  • 59 of 108

### Page 60 (OCR)

REQUIREMENTS BULLETIN 747-53A2910
ALERT  ALERT
• SKIN  FRAME
ASSEMBLY
STA
2360
STRINGER
TYPICAL
(VIEW LOOKING OUTBOARD)
(PRESSURE BULKHEAD NOT SHOWN FOR CLARITY
END FITTING
SKIN-
- END FITTING
FRAME
ASSEMBLY
DETAILED INSPECTION AREA  A-A
FIGURE 6: RIGHT SIDE - STRINGER ASSEMBLIES S-18R TO S-25R, S-34R, S-36R, S-38R, S-40R, S-42R,
S-44R, S-46R AND S-48R TO S-51R, FORWARD OF THE PRESSURE BULKHEAD AT STA 2360 -
INSPECTION
(SHEET 2 OF 4)
Original Issue: September 21, 2022
Export Controlled ECCN: 9E991  747-53A2910 RB
Copyright © Unpublished Work - See page 1 for details.  60 of 108

The text continues at https://openairdocs.org/service-documents/boeing/747-53a2910-rb/file/1c74ee176e66.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
