# Boeing Alert Service Bulletin 747-57A2348: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-5041; AD 2016-24-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 747-57A2348](https://openairdocs.org/service-documents/boeing/747-57a2348.md)
- Title as filed: SB-747-57A2348-01--
- Pages: 78
- PDF: https://openairdocs.org/files/sha256/90/b1/90b1cb61ad96d417259bcaf219a8a79d6e1901dd01ad665cca678f3e03580775
- Page: https://openairdocs.org/service-documents/boeing/747-57a2348/file/90b1cb61ad96

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
747
Service Bulletin
ALERT
Number: 747-57A2348
Original Issue: June 12, 2015
Revision 1: February 26, 2016
ATA System: 5752
SUBJECT: WINGS - Trailing Edge Flaps - Transmission Aft Bearing Plate Assembly Replacement
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2015 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
1 of 78
2.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
2 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 19
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 24
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 35
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
FIGURE 1: FLAP TRACK 1 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL . . . 45
FIGURE 2: FLAP TRACK 2 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL . . . 47
FIGURE 3: FLAP TRACK 3 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL . . . 49
FIGURE 4: FLAP TRACK 4 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL . . . 51
FIGURE 5: FLAP TRACK 5 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL . . . 53
FIGURE 6: FLAP TRACK 6 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL . . . 55
FIGURE 7: FLAP TRACK 7 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL . . . 57
FIGURE 8: FLAP TRACK 8 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL . . . 59
FIGURE 9: FLAP TRACK 1 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - INSTALLATION. 61
FIGURE 10: FLAP TRACK 2 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - INSTALLATION. 63
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
3 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 4

FIGURE 11: FLAP TRACK 3 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - INSTALLATION. 65
FIGURE 12: FLAP TRACK 4 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - INSTALLATION. 67
FIGURE 13: FLAP TRACK 5 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - INSTALLATION. 69
FIGURE 14: FLAP TRACK 6 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - INSTALLATION. 71
FIGURE 15: FLAP TRACK 7 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - INSTALLATION. 73
FIGURE 16: FLAP TRACK 8 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - INSTALLATION. 75
APPENDIX A: DELETED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
APPENDIX B: PART DEMAND INTENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
4 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 5

Commercial 
Airplanes
747
Service Bulletin
ALERT
Revision Transmittal SheetNumber: 747-57A2348Original Issue: June 12, 2015
Revision 1: February 26, 2016
ATA System: 5752
SUBJECT: WINGS - Trailing Edge Flaps - Transmission Aft Bearing Plate Assembly Replacement
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Effects of this Revision on airplanes on which Original Issue was previously done:
None.
REASON FOR REVISION
This revision is sent to incorporate changes to the access requirements and kit found to be necessary during
the validation of the original issue.
As a part of a service bulletin validation program, this change was completed on airplane RC504 by Service
Bulletin 747-57A2348 Original Issue before the release of Revision 1 of this service bulletin. The change
completed on airplane RC504 by Service Bulletin 747-57A2348 Original Issue is equivalent to the release of
Revision 1 of this service bulletin. Airplane RC504 has the configuration of a Group 4 airplane.
These sections were changed:
1. In Summary, Background, cost benefit analysis statement removed, validation paragraph added and
summary evaluation table updated.
2. In Section 1.A.1., Airplanes, corrected the number of groups and removed airplanes, RC021, RC051
and RC052, from effectivity.
3. In Section 1.C., Reason, reason for revision added, validation paragraph added and cost benefit analysis
statement removed.
4. In Section 1.D., Description, effects of this revision paragraph added.
5. In Section 1.G., Manpower, estimates revised to include revised access steps.
6. In Section 1.J., References, AMM references added for revised access steps.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
5 of 78

### Page 6

7. In Section 2.A., Material - Price and Availability, note added to clarify the relationship between
015U2129-1 and 015U2129-2 Top Kits.
8. In Section 2.C.1., Kits/Parts, new kit added.
9. In Section 2.C.2., Parts and Materials Supplied by the Operator, parts removed and revised to 'None.'
10. In Section 3.B., Work Instructions, revised the access steps in PART 1, PART 2, PART 3 and PART
4.
11. Figures 9 thru 16, specific part marking code added.
12. Figures 12 and 13, washer quantity increased and cotter pin part number revised.
13. Appendix A: Cost Benefit Analysis deleted.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Pages with no vertical lines have no changes.
REVISION HISTORY
June 12, 2015Original Issue:
February 26, 2016Revision 1:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
6 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 7

Commercial 
Airplanes
747
Service Bulletin
ALERT
SummaryNumber: 747-57A2348Original Issue: June 12, 2015
Revision 1: February 26, 2016
ATA System: 5752
SUBJECT: WINGS - Trailing Edge Flaps - Transmission Aft Bearing Plate Assembly Replacement
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin is sent to provide instruction to replace the aluminum Transmission Aft Bearing Plate
Assemblies with new titanium Transmission Aft Bearing Plate Assemblies. If the work given in this bulletin is
not completed, then the aluminum Transmission Aft Bearing Plate Assemblies could be damaged in extreme
loading conditions such as flap jams or skews. Under these conditions, damaged Transmission Bearing Plate
Assemblies could stop the flap transmission from working correctly and could result in loss of flap control.
Alternatively, if failure of one of the other components in the flap attachment or flap drive system were to occur,
the resulting redistribution of loads could result in damage to the aft bearing plate assemblies, potentially causing
detachment of the flap transmission from its flap track and possible flap departure, resulting in loss of controllability
of the airplane.
Boeing has done an analysis of the aluminum Transmission Aft Bearing Plate Assemblies. Each airplane has
eight Transmission Aft Bearing Plate Assemblies, one at each of the eight flap track locations. Static strength
analysis has shown that the aluminum Transmission Aft Bearing Plate Assemblies have inadequate strength
for one or more of the required load cases, including cases for drive system jam, flap skew, and structural
damage tolerance. These types of load cases can cause a flap transmission torque brake trip, which will then
cause additional loading on the Transmission Aft Bearing Plate Assemblies common to that flap. This could
cause damage to the Transmission Aft Bearing Plate Assemblies. The new titanium Transmission Aft Bearing
Plate Assemblies have increased strength to prevent any potential damage caused in these high load cases.
Boeing has determined this scenario by analysis and has not yet received any reports of damaged Transmission
Aft Bearing Plate Assemblies from operators.
NOTE: The work given in this service bulletin is a terminating action for the repeat inspections in Boeing Service
Bulletin (SB) 747-57-2347. Each work package in this SB can be completed independently and is
considered a terminating action for inspections in SB 747-57-2347 at that flap track only. Repeat
inspections given in SB 747-57-2347 must continue at all flap tracks where the modification given in
this SB has not been completed.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
7 of 78

### Page 8

Boeing Service Related Problem (SRP) 747-8-SRP-57-0269 is related to this service bulletin.
As a part of a service bulletin validation program, this change was completed on airplane RC504 by Service
Bulletin 747-57A2348 Original Issue before the release of Revision 1 of this service bulletin. The change
completed on airplane RC504 by Service Bulletin 747-57A2348 Original Issue is equivalent to the release of
Revision 1 of this service bulletin. Airplane RC504 has the configuration of a Group 4 airplane.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesYesWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsYesKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
NoOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION (PRR 85901-140S)
Get access to the Transmission Aft Bearing Plate Assemblies located at each flap track. Remove and keep the
inboard and outboard flap track fairings. Remove and discard the eight existing aluminum Transmission Aft
Bearing Plate Assemblies. Install eight new titanium Transmission Aft Bearing Plate Assemblies and install kept
inboard and outboard flap track fairings. Do an inboard and outboard flap adjustment, a check of the flap position
and a trailing edge flap system test.
EFFECTIVITY
747-8, 747-8F Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the change given in this service bulletin be done within 48 months after the original
issue date of this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
8 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 9

INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of March 12, 2014. Please refer to Paragraph
2.B., Industry Support Information. The warranty remedies will expire eight years from the original issue date of
this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
Operators are encouraged to complete the survey provided in APPENDIX B of this service bulletin to help Boeing
predict the quantity and timing of the Boeing Supplied Kits/Parts.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
9 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 10 (OCR)

BOEING SERVICE BULLETIN 747-57A2348
ALERT  ALERT
GET ACCESS TO THE TRANS  MISSION AFT
BEARING PLATE ASSEMBLIES  OCATED AT EACH
FLAP TRACK. REMOVE AND KEEP THE INBOARD
AND OUTBOARD  FAIRINGS
REMOVE AND DIS  RD THE EIGHT EXISTING
ON AFT BEARING PLATE
HT NEW TITANIUM
TRANSMISSION AFT BE  ING PLATE ASSEMBLIES
AND INS  ARD AND OUTBOARD
FLAP TRACK FAIRINGS  AN INBOARD AND
OUTBOARD FLAP ADJUST  MENT, A CHECK OF THE
FLAP POSITION AND A TRAILING EDGE FLAP
SYSTEM TEST.
FLAP TRACK
(TYPICAL)
TRANSMISSION REMOVED FOR CLARITY
(LEFT SIDE SHOWN, RIGHT SIDE OPPOSITE)
2402054
Original Issue: June 12, 2015
Revision 1: February 26, 2016  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  Work - See page 1 for details.  747-57A2348  10 of 78

### Page 11

Commercial 
Airplanes
747
Service Bulletin
ALERT
Number: 747-57A2348
Original Issue: June 12, 2015
Revision 1: February 26, 2016
ATA System: 5752
SUBJECT: WINGS - Trailing Edge Flaps - Transmission Aft Bearing Plate Assembly Replacement
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is applicable to 747-8 and 747-8F Airplanes, line numbers 1420-1434,
1436-1505, 1507, 1508, and 1510-1514 in 10 Groups. The Variable Numbers and Group Information
for the applicable airplanes is given below. An equivalent change is on subsequent production
airplanes. Refer to PRR 85901-140S for data about this change.
Refer to Service Bulletin Index D6-30300 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP
747-8F airplanes, line numbers 1420-1421 with unique track assembly
part numbers
-1
747-8F airplanes, line numbers 1422-1423 with unique track assembly
part numbers
-2
747-8F airplanes, line numbers 1424-1433 with unique track assembly
part numbers
-3
747-8F airplanes, line numbers 1436-1450 with unique track assembly
part numbers
-4
747-8 airplanes, line numbers 1434-1451 with unique track assembly
part numbers
-5
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
11 of 78

### Page 12

DESCRIPTIONCONFIGURATIONGROUP
747-8F airplanes, line numbers 1452-1496 with unique track assembly
part numbers
-6
747-8 airplanes, line numbers 1453-1499 with unique track assembly
part numbers
-7
747-8F airplanes, line numbers 1501-1505 with unique track assembly
part numbers
-8
747-8 airplanes, line numbers 1500-1503 with unique track assembly
part numbers
-9
747-8 airplanes, line numbers 1505-1514 with unique track assembly
part numbers
-10
Airplane Models:
747-8, 747-8F
GroupVariable Number
5RC001 - RC005
7RC006 - RC009
5RC022 - RC023
7RC024 - RC034
9RC035 - RC036
10RC037 - RC040
7RC066
10RC067 - RC069
1RC501
2RC502
3RC503
4RC504
6RC505 - RC511
8RC512
1RC521
2RC522
3RC523
6RC524 - RC528
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
12 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 13

GroupVariable Number
3RC541
3RC546
6RC547 - RC549
3RC551 - RC553
4RC554 - RC557
6RC558 - RC563
8RC564
3RC571 - RC572
4RC573 - RC576
6RC577 - RC582
3RC601
4RC602
6RC603 - RC605
6RC641 - RC642
8RC671 - RC672
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
This service bulletin is sent to provide instruction to replace the aluminum Transmission Aft Bearing
Plate Assemblies with new titanium Transmission Aft Bearing Plate Assemblies. If the work given in
this bulletin is not completed, then the aluminum Transmission Aft Bearing Plate Assemblies could be
damaged in extreme loading conditions such as flap jams or skews. Under these conditions, damaged
Transmission Bearing Plate Assemblies could stop the flap transmission from working correctly and
could result in loss of flap control. Alternatively, if failure of one of the other components in the flap
attachment or flap drive system were to occur, the resulting redistribution of loads could result in damage
to the aft bearing plate assemblies, potentially causing detachment of the flap transmission from its
flap track and possible flap departure, resulting in loss of controllability of the airplane.
Boeing has done an analysis of the aluminum Transmission Aft Bearing Plate Assemblies. Each airplane
has eight Transmission Aft Bearing Plate Assemblies, one at each of the eight flap track locations.
Static strength analysis has shown that the aluminum Transmission Aft Bearing Plate Assemblies have
inadequate strength for one or more of the required load cases, including cases for drive system jam,
flap skew, and structural damage tolerance. These types of load cases can cause a flap transmission
torque brake trip, which will then cause additional loading on the Transmission Aft Bearing Plate
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
13 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 14

Assemblies common to that flap. This could cause damage to the Transmission Aft Bearing Plate
Assemblies. The new titanium Transmission Aft Bearing Plate Assemblies have increased strength to
prevent any potential damage caused in these high load cases. Boeing has determined this scenario
by analysis and has not yet received any reports of damaged Transmission Aft Bearing Plate Assemblies
from operators.
NOTE: The work given in this service bulletin is a terminating action for the repeat inspections in
Boeing Service Bulletin (SB) 747-57-2347. Each work package in this SB can be completed
independently and is considered a terminating action for inspections in SB 747-57-2347 at
that flap track only. Repeat inspections given in SB 747-57-2347 must continue at all flap
tracks where the modification given in this SB has not been completed.
Boeing Service Related Problem (SRP) 747-8-SRP-57-0269 is related to this service bulletin.
As a part of a service bulletin validation program, this change was completed on airplane RC504 by
Service Bulletin 747-57A2348 Original Issue before the release of Revision 1 of this service bulletin.
The change completed on airplane RC504 by Service Bulletin 747-57A2348 Original Issue is equivalent
to the release of Revision 1 of this service bulletin. Airplane RC504 has the configuration of a Group
4 airplane.
Revision 1 is sent to incorporate changes to the access requirements and kit found to be necessary
during the validation of the original issue.
D. Description
Get access to the Transmission Aft Bearing Plate Assemblies located at each flap track. Remove and
keep the inboard and outboard flap track fairings. Remove and discard the eight existing aluminum
Transmission Aft Bearing Plate Assemblies. Install eight new titanium Transmission Aft Bearing Plate
Assemblies and install kept inboard and outboard flap track fairings. Do an inboard and outboard flap
adjustment, a check of the flap position and a trailing edge flap system test.
Effects of this Revision on airplanes on which Original Issue was previously done:
None.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1-4, 6, 8:
Affected Maintenance Zones
ZoneModel
561, 563, 565, 567, 661, 663, 665, 667747-8F
Group 5, 7, 9-10:
Affected Maintenance Zones
ZoneModel
561, 563, 565, 567, 661, 663, 665, 667747-8
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
14 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 15

E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 48 months after the
original issue date of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The tables below show an estimate of the task hours necessary to do this modification for each flap
track. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with
operator task hour data if necessary. The estimate does not include lost time. These are some examples
of lost time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools.
Work Package 1 - Flap Track 1 Transmission Aft Bearing Plate Assembly Replacement
Elapsed HoursTask HoursNumber of PersonsTask
2.206.603Access
1.00 (a)2.00 (a)2Disconnect Actuator
Ball Screw Nut
0.750.751FIGURE 1
1.001.001FIGURE 9
1.00 (a)2.00 (a)2Connect Actuator Ball
Screw Nut
2.708.103Close Access
6.6516.45TOTAL FOR EACH FLAP TRACK
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
15 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 16

Work Package 1 - Flap Track 1 Transmission Aft Bearing Plate Assembly Replacement
Elapsed HoursTask HoursNumber of PersonsTask
(a) These tasks are optional and are not included in the total given. If these tasks are ac-
complished, the time shown must be added to the total given.
Work Package Number 1 can be done at the same time as Work Packages 2, 3, 4, 5, 6, 7, and 8
Work Package 2 - Flap Track 2 Transmission Aft Bearing Plate Assembly Replacement
Elapsed HoursTask HoursNumber of PersonsTask
2.206.603Access
1.00 (a)2.00 (a)2Disconnect Actuator
Ball Screw Nut
0.750.751FIGURE 2
1.001.001FIGURE 10
1.00 (a)2.00 (a)2Connect Actuator Ball
Screw Nut
2.708.103Close Access
6.6516.45TOTAL FOR EACH FLAP TRACK
(a) These tasks are optional and are not included in the total given. If these tasks are ac-
complished, the time shown must be added to the total given.
Work Package Number 2 can be done at the same time as Work Packages 1, 3, 4, 5, 6, 7, and 8
Work Package 3 - Flap Track 3 Transmission Aft Bearing Plate Assembly Replacement
Elapsed HoursTask HoursNumber of PersonsTask
2.206.603Access
1.00 (a)2.00 (a)2Disconnect Actuator
Ball Screw Nut
0.750.751FIGURE 3
1.001.001FIGURE 11
1.00 (a)2.00 (a)2Connect Actuator Ball
Screw Nut
2.708.103Close Access
6.6516.45TOTAL FOR EACH FLAP TRACK
(a) These tasks are optional and are not included in the total given. If these tasks are ac-
complished, the time shown must be added to the total given.
Work Package Number 3 can be done at the same time as Work Packages 1, 2, 4, 5, 6, 7, and 8
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
16 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 17

Work Package 4 - Flap Track 4 Transmission Aft Bearing Plate Assembly Replacement
Elapsed HoursTask HoursNumber of PersonsTask
2.206.603Access
1.00 (a)2.00 (a)2Disconnect Actuator
Ball Screw Nut
0.750.751FIGURE 4
1.001.001FIGURE 12
1.00 (a)2.00 (a)2Connect Actuator Ball
Screw Nut
2.708.103Close Access
6.6516.45TOTAL FOR EACH FLAP TRACK
(a) These tasks are optional and are not included in the total given. If these tasks are ac-
complished, the time shown must be added to the total given.
Work Package Number 4 can be done at the same time as Work Packages 1, 2, 3, 5, 6, 7, and 8
Work Package 5 - Flap Track 5 Transmission Aft Bearing Plate Assembly Replacement
Elapsed HoursTask HoursNumber of PersonsTask
2.206.603Access
1.00 (a)2.00 (a)2Disconnect Actuator
Ball Screw Nut
0.750.751FIGURE 5
1.001.001FIGURE 13
1.00 (a)2.00 (a)2Connect Actuator Ball
Screw Nut
2.708.103Close Access
6.6516.45TOTAL FOR EACH FLAP TRACK
(a) These tasks are optional and are not included in the total given. If these tasks are ac-
complished, the time shown must be added to the total given.
Work Package Number 5 can be done at the same time as Work Packages 1, 2, 3, 4, 6, 7, and 8
Work Package 6 - Flap Track 6 Transmission Aft Bearing Plate Assembly Replacement
Elapsed HoursTask HoursNumber of PersonsTask
2.206.603Access
1.00 (a)2.00 (a)2Disconnect Actuator
Ball Screw Nut
0.750.751FIGURE 6
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
17 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 18

Work Package 6 - Flap Track 6 Transmission Aft Bearing Plate Assembly Replacement
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001FIGURE 14
1.00 (a)2.00 (a)2Connect Actuator Ball
Screw Nut
2.708.103Close Access
6.6516.45TOTAL FOR EACH FLAP TRACK
(a) These tasks are optional and are not included in the total given. If these tasks are ac-
complished, the time shown must be added to the total given.
Work Package Number 6 can be done at the same time as Work Packages 1, 2, 3, 4, 5, 7, and 8
Work Package 7 - Flap Track 7 Transmission Aft Bearing Plate Assembly Replacement
Elapsed HoursTask HoursNumber of PersonsTask
2.206.603Access
1.00 (a)2.00 (a)2Disconnect Actuator
Ball Screw Nut
0.750.751FIGURE 7
1.001.001FIGURE 15
1.00 (a)2.00 (a)2Connect Actuator Ball
Screw Nut
2.708.103Close Access
6.6516.45TOTAL FOR EACH FLAP TRACK
(a) These tasks are optional and are not included in the total given. If these tasks are ac-
complished, the time shown must be added to the total given.
Work Package Number 7 can be done at the same time as Work Packages 1, 2, 3, 4, 5, 6, and 8
Work Package 8 - Flap Track 8 Transmission Aft Bearing Plate Assembly Replacement
Elapsed HoursTask HoursNumber of PersonsTask
2.206.603Access
1.00 (a)2.00 (a)2Disconnect Actuator
Ball Screw Nut
0.750.751FIGURE 8
1.001.001FIGURE 16
1.00 (a)2.00 (a)2Connect Actuator Ball
Screw Nut
2.708.103Close Access
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
18 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 19

Work Package 8 - Flap Track 8 Transmission Aft Bearing Plate Assembly Replacement
Elapsed HoursTask HoursNumber of PersonsTask
6.6516.45TOTAL FOR EACH FLAP TRACK
(a) These tasks are optional and are not included in the total given. If these tasks are ac-
complished, the time shown must be added to the total given.
Work Package Number 8 can be done at the same time as Work Packages 1, 2, 3, 4, 5, 6, and 7
H. Weight and Balance Changes
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+12,945.50+8.50All
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR 85901-140S
b. Boeing Service Bulletin 747-57-2347
c. Boeing Service Letter 747-SL-51-048
d. Boeing Service Related Problem (SRP) 747-8-SRP-57-0269
e. Service Bulletin Index D6-30300
f. Standard Overhaul Practices Manual (SOPM) 20-50-01, 20-50-10
g. 747-8 Aircraft Maintenance Manual (AMM) 27-51-00, 27-51-01, 27-51-04, 27-51-26, 27-51-31,
27-51-33, 27-51-46
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
TRACK INSTL - OUTBOARD FLAP, TRACK NO. 1 AND NO. 8113U1150
TRACK INSTL - OUTBOARD FLAP, TRACK NO. 2 AND NO. 7113U1250
TRACK INSTL - INBOARD FLAP, TRACK NO. 3 AND NO. 6113U1350
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
19 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 20

TitleDrawing Number
TRACK INSTL - INBOARD FLAP, TRACK NO. 4 AND NO. 5113U1450
TRANSMISSION INSTL OUTBD - OUTBD T.E. FLAPS, DRIVE
NO. 1 AND 8
256U5100
TRANSMISSION INSTL INBD - OUTBD T.E. FLAPS, DRIVE NO.
2 AND 7
256U5200
TRANSMISSION INSTL OUTBD - INBD T.E. FLAPS, DRIVE NO.
3 AND 6
256U5300
TRANSMISSION INSTL INBD - INBD T.E. FLAPS DRIVE, NO. 4
AND 5
256U5400
The table above lists applicable drawings used to prepare this service bulletin. The drawings are
not necessary to make the specified changes, and are not supplied with this service bulletin. The
drawings may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
27-51, 27-50747 Fault Isolation Manual
27-51747 Illustrated Parts Catalog
57-52Component Maintenance Manual
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS but no new DTIs are necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
20 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 21

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kit shown in Paragraph 2.C., Parts Necessary for Each Airplane. Operators are
encouraged to share schedule requirements with Boeing for incorporation of the service bulletin. The
kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment.
Prices are in United States Dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of these methods:
1. Order on-line via ATA Spec 2000 or The Boeing PART Page
2. Fax to (206) 662-7145
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the original issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
original issue
date of this Ser-
vice Bulletin (Cal-
endar Days)
QTYDateNameKit Number
43,787.005452003/07/16TOP KIT, RETROFIT -
WING TE FLAP
TRANSMISSION AFT
ATTACH FITTINGS
REPLACEMENT
015U2129-2
43,787.005452004/04/16TOP KIT, RETROFIT -
WING TE FLAP
TRANSMISSION AFT
ATTACH FITTINGS
REPLACEMENT
015U2129-2
43,787.005452005/02/16TOP KIT, RETROFIT -
WING TE FLAP
TRANSMISSION AFT
ATTACH FITTINGS
REPLACEMENT
015U2129-2
43,787.00545705/31/16TOP KIT, RETROFIT -
WING TE FLAP
TRANSMISSION AFT
ATTACH FITTINGS
REPLACEMENT
015U2129-2
NOTE: The 015U2129-1 Top Kit is no longer available. Operators that have a 015U2129-1 Top Kit
can complete the work given in this service bulletin by providing four additional
BACP18BC04A10P pins and four additional BACW10BP9APU washers.
Operators are encouraged to complete the survey provided in APPENDIX B of this service bulletin to
help Boeing predict the quantity and timing of the Boeing Supplied Kits/Parts.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
21 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 22

B. Industry Support Information
Boeing warranty remedies are available for 747-8 and 747-8F airplanes in warranty as of March 12,
2014. For task hour reimbursement for airplanes in warranty as of that date, send a warranty claim to
Boeing Fleet Support Contracts - Warranty. The kits for airplanes in warranty as of that date will be
supplied at no charge. Send a purchase order for the kits to Boeing Material Management. Please refer
to this service bulletin number and reference the airplane variable numbers in your purchase order.
The warranty remedies will expire eight years from the original issue date of this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
NOTE: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, are necessary for each airplane. The Top Kit is divided into Figure kits for
each installation figure shown in the table below.
Figure Kit
14131211109Top Kit
111111015U2129-2
Figure Kit
1615Top Kit
11015U2129-2
ALL
KIT 015U2129-2
Notes
Existing Part
NumberName
Figure
New Part Number
14131211109
Qty
-TRANSMISSION
AFT BEARING
PLATE ASSY
.....1113U1192-5
-TRANSMISSION
AFT BEARING
PLATE ASSY
....1.113U1292-5
-TRANSMISSION
AFT BEARING
PLATE ASSY
...1..113U1392-5
-TRANSMISSION
AFT BEARING
PLATE ASSY
1.....113U1392-6
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
22 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 23

ALL
KIT 015U2129-2
Notes
Existing Part
NumberName
Figure
New Part Number
14131211109
Qty
-TRANSMISSION
AFT BEARING
PLATE ASSY
..1...113U1492-7
-TRANSMISSION
AFT BEARING
PLATE ASSY
.1....113U1492-8
-NUT, CASTELLAT-
ED
2..2..BACN11N107CS
-NUT....22BACN11N108CS
-NUT, CASTELLAT-
ED
.22...BACN11N110CS
-NUT, CASTELLAT-
ED
2..222BACN11N7CS
-NUT, CASTELLAT-
ED
.22...BACN11N9CS
-PIN4..444BACP18BC03A08P
-PIN.44...BACP18BC04A10P
-WASHER.66...BACW10BP10APU
-WASHER12..1244BACW10BP7APU
-WASHER....46BACW10BP8APU
-WASHER.44...BACW10BP9APU
ALL
KIT 015U2129-2
Notes
Existing Part
NumberName
Figure
New Part Number
1615
Qty
-TRANSMISSION
AFT BEARING
PLATE ASSY
1.113U1192-6
-TRANSMISSION
AFT BEARING
PLATE ASSY
.1113U1292-6
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
23 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 24

ALL
KIT 015U2129-2
Notes
Existing Part
NumberName
Figure
New Part Number
1615
Qty
-NUT22BACN11N108CS
-NUT, CASTELLAT-
ED
22BACN11N7CS
-PIN44BACP18BC03A08P
-WASHER44BACW10BP7APU
-WASHER64BACW10BP8APU
2. Parts and Materials Supplied by the Operator
None.
3. Parts Modified and Reidentified
The parts shown below are changed as shown in this service bulletin. The quantity (QTY) is the
number of parts changed on each airplane.
Group 1:
NotesNew Part NumberNameQTYExisting Part
Number
(a)-TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 1
1113U1151-1
(a)-TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 8
1113U1151-2
(a)-TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 2
1113U1251-5
(a)-TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 7
1113U1251-6
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 3
1113U1351-1
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 6
1113U1351-2
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
24 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 25

Group 1:
NotesNew Part NumberNameQTYExisting Part
Number
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 4
1113U1451-1
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 5
1113U1451-2
(a) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change done in accordance with this service bulletin was made.
Group 2:
NotesNew Part NumberNameQTYExisting Part
Number
(a)-TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 1
1113U1151-3
(a)-TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 8
1113U1151-4
(a)-TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 2
1113U1251-5
(a)-TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 7
1113U1251-6
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 3
1113U1351-1
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 6
1113U1351-2
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 4
1113U1451-1
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 5
1113U1451-2
(a) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change done in accordance with this service bulletin was made.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
25 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 26

Group 3:
NotesNew Part NumberNameQTYExisting Part
Number
-113U1151-13TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 1
1113U1151-5
-113U1151-14TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 8
1113U1151-6
-113U1251-15TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 2
1113U1251-7
-113U1251-16TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 7
1113U1251-8
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 3
1113U1351-3
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 6
1113U1351-4
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 4
1113U1451-1
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 5
1113U1451-2
(a) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change done in accordance with this service bulletin was made.
Group 4:
NotesNew Part NumberNameQTYExisting Part
Number
-113U1151-13TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 1
1113U1151-5
-113U1151-14TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 8
1113U1151-6
-113U1251-15TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 2
1113U1251-7
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
26 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 27

Group 4:
NotesNew Part NumberNameQTYExisting Part
Number
-113U1251-16TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 7
1113U1251-8
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 3
1113U1351-5
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 6
1113U1351-6
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 4
1113U1451-1
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 5
1113U1451-2
(a) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change done in accordance with this service bulletin was made.
Group 5:
NotesNew Part NumberNameQTYExisting Part
Number
-113U1151-13TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 1
1113U1151-5
-113U1151-14TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 8
1113U1151-6
-113U1251-15TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 2
1113U1251-7
-113U1251-16TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 7
1113U1251-8
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 3
1113U1351-101
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 6
1113U1351-102
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
27 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 28

Group 5:
NotesNew Part NumberNameQTYExisting Part
Number
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 4
1113U1451-101
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 5
1113U1451-102
(a) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change done in accordance with this service bulletin was made.
Group 6:
NotesNew Part NumberNameQTYExisting Part
Number
(a)-INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 1
1113U1151-7
(a)-INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 8
1113U1151-8
(a)-INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 2
1113U1251-9
(a)-INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 7
1113U1251-10
(a)-INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 3
1113U1351-7
(a)-INTEGRATED TRACK
ASSY - INBOARD
FLAP, TRACK NO. 6
1113U1351-8
(a)-INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 4
1113U1451-3
(a)-INTEGRATED TRACK
ASSY - INBOARD
FLAP, TRACK NO. 5
1113U1451-4
-113U1151-13TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 1
1113U1151-5
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
28 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 29

Group 6:
NotesNew Part NumberNameQTYExisting Part
Number
-113U1151-14TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 8
1113U1151-6
-113U1251-15TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 2
1113U1251-7
-113U1251-16TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 7
1113U1251-8
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 3
1113U1351-5
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 6
1113U1351-6
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 4
1113U1451-5
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 5
1113U1451-6
(a) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change done in accordance with this service bulletin was made.
Group 7:
NotesNew Part NumberNameQTYExisting Part
Number
(a)-INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 1
1113U1151-7
(a)-INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 8
1113U1151-8
(a)-INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 2
1113U1251-9
(a)-INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 7
1113U1251-10
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
29 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 30

Group 7:
NotesNew Part NumberNameQTYExisting Part
Number
(a)-INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 3
1113U1351-103
(a)-INTEGRATED TRACK
ASSY - INBOARD
FLAP, TRACK NO. 6
1113U1351-104
(a)-INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 4
1113U1451-103
(a)-INTEGRATED TRACK
ASSY - INBOARD
FLAP, TRACK NO. 5
1113U1451-104
-113U1151-13TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 1
1113U1151-5
-113U1151-14TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 8
1113U1151-6
-113U1251-15TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 2
1113U1251-7
-113U1251-16TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 7
1113U1251-8
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 3
1113U1351-101
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 6
1113U1351-102
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 4
1113U1451-105
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 5
1113U1451-106
(a) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change done in accordance with this service bulletin was made.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
30 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 31

Group 8:
NotesNew Part NumberNameQTYExisting Part
Number
-113U1151-11INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 1
1113U1151-9
-113U1151-12INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 8
1113U1151-10
-113U1251-13INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 2
1113U1251-11
-113U1251-14INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 7
1113U1251-12
-113U1351-21INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 3
1113U1351-9
-113U1351-22INTEGRATED TRACK
ASSY - INBOARD
FLAP, TRACK NO. 6
1113U1351-10
-113U1451-19INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 4
1113U1451-7
-113U1451-20INTEGRATED TRACK
ASSY - INBOARD
FLAP, TRACK NO. 5
1113U1451-8
-113U1151-13TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 1
1113U1151-5
-113U1151-14TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 8
1113U1151-6
-113U1251-15TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 2
1113U1251-7
-113U1251-16TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 7
1113U1251-8
-113U1351-23TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 3
1113U1351-11
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
31 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 32

Group 8:
NotesNew Part NumberNameQTYExisting Part
Number
-113U1351-24TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 6
1113U1351-12
-113U1451-21TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 4
1113U1451-9
-113U1451-22TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 5
1113U1451-10
(a) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change done in accordance with this service bulletin was made.
Group 9:
NotesNew Part NumberNameQTYExisting Part
Number
-113U1151-11INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 1
1113U1151-9
-113U1151-12INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 8
1113U1151-10
-113U1251-13INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 2
1113U1251-11
-113U1251-14INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 7
1113U1251-12
-113U1351-109INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 3
1113U1351-105
-113U1351-110INTEGRATED TRACK
ASSY - INBOARD
FLAP, TRACK NO. 6
1113U1351-106
-113U1451-111INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 4
1113U1451-107
-1131451-112INTEGRATED TRACK
ASSY - INBOARD
FLAP, TRACK NO. 5
1113U1451-108
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
32 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 33

Group 9:
NotesNew Part NumberNameQTYExisting Part
Number
-113U1151-13TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 1
1113U1151-5
-113U1151-14TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 8
1113U1151-6
-113U1251-15TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 2
1113U1251-7
-113U1251-16TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 7
1113U1251-8
-113U1351-111TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 3
1113U1351-107
-113U1351-112TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 6
1113U1351-108
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 4
1113U1451-105
(a)-TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 5
1113U1451-106
(a) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change done in accordance with this service bulletin was made.
Group 10:
NotesNew Part NumberNameQTYExisting Part
Number
-113U1151-11INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 1
1113U1151-9
-113U1151-12INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 8
1113U1151-10
-113U1251-13INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 2
1113U1251-11
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
33 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 34

Group 10:
NotesNew Part NumberNameQTYExisting Part
Number
-113U1251-14INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 7
1113U1251-12
-113U1351-109INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 3
1113U1351-105
-113U1351-110INTEGRATED TRACK
ASSY - INBOARD
FLAP, TRACK NO. 6
1113U1351-106
-113U1451-111INTEGRATED TRACK
ASSY - OUTBOARD
FLAP, TRACK NO. 4
1113U1451-107
-113U1451-112INTEGRATED TRACK
ASSY - INBOARD
FLAP, TRACK NO. 5
1113U1451-108
-113U1151-13TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 1
1113U1151-5
-113U1151-14TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 8
1113U1151-6
-113U1251-15TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 2
1113U1251-7
-113U1251-16TRACK ASSY - OUT-
BOARD FLAP, TRACK
NO. 7
1113U1251-8
-113U1351-111TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 3
1113U1351-107
-113U1351-112TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 6
1113U1351-108
-113U1451-113TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 4
1113U1451-109
-113U1451-114TRACK ASSY - IN-
BOARD FLAP, TRACK
NO. 5
1113U1451-110
(a) There is no equivalent Boeing part number for the changed part. Identify on the part that
the change done in accordance with this service bulletin was made.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
34 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 35

4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
35 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 36

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
36 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT
BLANK PAGE

### Page 37

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. The work instructions are divided into work packages. Task Hours and Elapsed Hours
for each package are given in Paragraph 1.G., Manpower. You can do each work
package independently.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 747 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 747
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 747
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
5. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
6. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate
full threaded fasteners (screws) needed for installation in this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
37 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 38

7. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
8. Boeing Service Letter 747-SL-51-048, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
9. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
10. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
11. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
12. This service bulletin includes functional test procedures for the systems changed by
this service bulletin. More functional tests can possibly be necessary in accordance
with standard maintenance practices because of interruption to other airplane systems.
13. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
14. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
15. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. An Alternative Method of
Compliance (AMOC) is required for any deviations to RC steps, including sub-steps
and identified figures. Steps not labeled as RC may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC. This is provided that the RC steps, including
sub-steps and identified figures, can still be done as specified, and the airplane can
be put back in an airworthy condition.
B. WORK INSTRUCTIONS
WORK PACKAGE 1: FLAP TRACK 1 TRANSMISSION AFT BEARING PLATE ASSEMBLY
REPLACEMENT
1. Do PART 1: OUTBOARD ACCESS.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
38 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 39

2. RC- Remove the Transmission Aft Bearing Plate Assembly from Flap Track 1 in accordance with
FIGURE 1.
3. RC- Install the new Transmission Aft Bearing Plate Assembly at Flap Track 1 in accordance with
FIGURE 9.
4. Do PART 3: CLOSE OUTBOARD ACCESS.
5. Put the airplane back to a serviceable condition.
WORK PACKAGE 2: FLAP TRACK 2 TRANSMISSION AFT BEARING PLATE ASSEMBLY
REPLACEMENT
1. Do PART 1: OUTBOARD ACCESS.
2. RC- Remove the Transmission Aft Bearing Plate Assembly from Flap Track 2 in accordance with
FIGURE 2.
3. RC- Install the new Transmission Aft Bearing Plate Assembly at Flap Track 2 in accordance with
FIGURE 10.
4. Do PART 3: CLOSE OUTBOARD ACCESS.
5. Put the airplane back to a serviceable condition.
WORK PACKAGE 3: FLAP TRACK 3 TRANSMISSION AFT BEARING PLATE ASSEMBLY
REPLACEMENT
1. Do PART 2: INBOARD ACCESS.
2. RC- Remove the Transmission Aft Bearing Plate Assembly from Flap Track 3 in accordance with
FIGURE 3.
3. RC- Install the new Transmission Aft Bearing Plate Assembly at Flap Track 3 in accordance with
FIGURE 11.
4. Do PART 4: CLOSE INBOARD ACCESS.
5. Put the airplane back to a serviceable condition.
WORK PACKAGE 4: FLAP TRACK 4 TRANSMISSION AFT BEARING PLATE ASSEMBLY
REPLACEMENT
1. Do PART 2: INBOARD ACCESS.
2. RC- Remove the Transmission Aft Bearing Plate Assembly from Flap Track 4 in accordance with
FIGURE 4.
3. RC- Install the new Transmission Aft Bearing Plate Assembly at Flap Track 4 in accordance with
FIGURE 12.
4. Do PART 4: CLOSE INBOARD ACCESS.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
39 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 40

5. Put the airplane back to a serviceable condition.
WORK PACKAGE 5: FLAP TRACK 5 TRANSMISSION AFT BEARING PLATE ASSEMBLY
REPLACEMENT
1. Do PART 2: INBOARD ACCESS.
2. RC- Remove the Transmission Aft Bearing Plate Assembly from Flap Track 5 in accordance with
FIGURE 5.
3. RC- Install the new Transmission Aft Bearing Plate Assembly at Flap Track 5 in accordance with
FIGURE 13.
4. Do PART 4: CLOSE INBOARD ACCESS.
5. Put the airplane back to a serviceable condition.
WORK PACKAGE 6: FLAP TRACK 6 TRANSMISSION AFT BEARING PLATE ASSEMBLY
REPLACEMENT
1. Do PART 2: INBOARD ACCESS.
2. RC- Remove the Transmission Aft Bearing Plate Assembly from Flap Track 6 in accordance with
FIGURE 6.
3. RC- Install the new Transmission Aft Bearing Plate Assembly at Flap Track 6 in accordance with
FIGURE 14.
4. Do PART 4: CLOSE INBOARD ACCESS.
5. Put the airplane back to a serviceable condition.
WORK PACKAGE 7: FLAP TRACK 7 TRANSMISSION AFT BEARING PLATE ASSEMBLY
REPLACEMENT
1. Do PART 1: OUTBOARD ACCESS.
2. RC- Remove the Transmission Aft Bearing Plate Assembly from Flap Track 7 in accordance with
FIGURE 7.
3. RC- Install the new Transmission Aft Bearing Plate Assembly at Flap Track 7 in accordance with
FIGURE 15.
4. Do PART 3: CLOSE OUTBOARD ACCESS.
5. Put the airplane back to a serviceable condition.
WORK PACKAGE 8: FLAP TRACK 8 TRANSMISSION AFT BEARING PLATE ASSEMBLY
REPLACEMENT
1. Do PART 1: OUTBOARD ACCESS.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
40 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 41

2. RC- Remove the Transmission Aft Bearing Plate Assembly from Flap Track 8 in accordance with
FIGURE 8.
3. RC- Install the new Transmission Aft Bearing Plate Assembly at Flap Track 8 in accordance with
FIGURE 16.
4. Do PART 3: CLOSE OUTBOARD ACCESS.
5. Put the airplane back to a serviceable condition.
PART 1: OUTBOARD ACCESS
1. Do one of the following options:
NOTE: OPTION 2: Disconnect the Flap Transmission will involve significantly more work and
risk possible damage to the Flap Transmission.
a. OPTION 1: Secure the Flap Transmission as follows:
(1) Extend and deactivate all trailing edge flaps. Refer to 747-8 AMM 27-51-00 as an accepted
procedure.
(2) Remove the Outboard Flap Track Forward Fairing. Refer to 747-8 AMM 27-51-31  as
an accepted procedure.
(3) Remove the Outboard Flap Track Aft Fairing. Refer to 747-8 AMM 27-51-31 as an
accepted procedure.
(4) Install the transmission removal and installation equipment. Refer to 747-8 AMM 27-51-33
as an accepted procedure.
(5) If necessary, disconnect the ball screw from the actuator attach gimbal fitting to get
sufficient access. Refer to 747-8 AMM 27-51-46 as an accepted procedure.
b. OPTION 2: Disconnect the Flap Transmission as follows:
(1) Extend and deactivate all trailing edge flaps. Refer to 747-8 AMM 27-51-00 as an accepted
procedure.
(2) Prepare for the Removal of the Flap Transmission. Refer to 747-8 AMM 27-51-33 as an
accepted procedure.
NOTE: For flap tracks 1 and 8, the position transmitter must be removed.
(3) Disconnect the applicable torque tubes from the transmission. Refer to 747-8 AMM
27-51-33 as an accepted procedure.
(4) Disconnect the ball screw from the transmission. Refer to 747-8 AMM 27-51-33 as an
accepted procedure.
(5) Install the transmission removal and installation equipment. Refer to 747-8 AMM 27-51-33
as an accepted procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
41 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 42

PART 2: INBOARD ACCESS
1. Do one of the following options:
NOTE: OPTION 2: Disconnect the Flap Transmission will involve significantly more work and
risk possible damage to the Flap Transmission.
a. OPTION 1: Secure the Flap Transmission as follows:
(1) Extend and deactivate all trailing edge flaps. Refer to 747-8 AMM 27-51-00 as an accepted
procedure.
(2) Remove the Inboard Flap Track Forward Fairing. Refer to 747-8 AMM 27-51-26  as an
accepted procedure.
(3) Remove the Inboard Flap Track Aft Fairing. Refer to 747-8 AMM 27-51-26 as an accepted
procedure.
(4) Install the transmission removal and installation equipment. Refer to 747-8 AMM 27-51-33
as an accepted procedure.
(5) If necessary, disconnect the ball screw from the actuator attach gimbal fitting to get
sufficient access. Refer to 747-8 AMM 27-51-46 as an accepted procedure.
b. OPTION 2: Disconnect the Flap Transmission as follows:
(1) Extend and deactivate all trailing edge flaps. Refer to 747-8 AMM 27-51-00 as an accepted
procedure.
(2) Prepare for the Removal of the Flap Transmission. Refer to 747-8 AMM 27-51-33 as an
accepted procedure.
NOTE: For flap tracks 3 and 6, the position transmitter must be removed.
(3) Disconnect the applicable torque tubes from the transmission. Refer to 747-8 AMM
27-51-33 as an accepted procedure.
(4) Disconnect the ball screw from the transmission. Refer to 747-8 AMM 27-51-33 as an
accepted procedure.
(5) Install the transmission removal and installation equipment. Refer to 747-8 AMM 27-51-33
as an accepted procedure.
PART 3: CLOSE OUTBOARD ACCESS
1. If OPTION 1 was used for PART 1: OUTBOARD ACCESS, do the following:
a. If the ball screw was disconnected during access, re-connect the ball screw to the actuator
attach gimbal fitting. Refer to 747-8 AMM 27-51-46 as an accepted procedure.
b. Remove the transmission removal and installation equipment. Refer to 747-8 AMM 27-51-33
as an accepted procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
42 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 43

c. Install the Outboard Flap Track Aft Fairing. Refer to 747-8 AMM 27-51-31 as an accepted
procedure.
d. Install the Outboard Flap Track Forward Fairing. Refer to 747-8 AMM 27-51-31 as an accepted
procedure.
e. Do a Check of the Flap Position. Refer to 747-8 AMM 27-51-04 as an accepted procedure.
f. Do a Trailing Edge Flap System - System Test. Refer to 747-8 AMM 27-51-00 as an accepted
procedure.
2. If OPTION 2 was used for PART 1 - OUTBOARD ACCESS, do the following:
a. Remove the transmission removal and installation equipment. Refer to 747-8 AMM 27-51-33
as an accepted procedure.
b. Attach the ball screw to the transmission. Refer to 747-8 AMM 27-51-33 as an accepted
procedure.
c. Connect the applicable torque tubes to the transmission. Refer to 747-8 AMM 27-51-33 as
an accepted procedure.
d. Install the Outboard Flap Track Forward Fairing. Refer to 747-8 AMM 27-51-31 as an accepted
procedure.
e. Do the Outboard Trailing Edge Flap - Adjustment. Refer to 747-8 AMM 27-51-04 as an accepted
procedure.
f. Do a Check of the Flap Position. Refer to 747-8 AMM 27-51-04 as an accepted procedure.
g. Do a Trailing Edge Flap System - System Test. Refer to 747-8 AMM 27-51-00 as an accepted
procedure.
PART 4: CLOSE INBOARD ACCESS
1. If OPTION 1 was used for PART 2: INBOARD ACCESS, do the following:
a. If the ball screw was disconnected during access, re-connect the ball screw to the actuator
attach gimbal fitting. Refer to 747-8 AMM 27-51-46 as an accepted procedure.
b. Remove the transmission removal and installation equipment. Refer to 747-8 AMM 27-51-33
as an accepted procedure.
c. Install the Inboard Flap Track Aft Fairing. Refer to 747-8 AMM 27-51-26 as an accepted
procedure.
d. Install the Inboard Flap Track Forward Fairing. Refer to 747-8 AMM 27-51-26 as an accepted
procedure.
e. Do a Check of the Flap Position. Refer to 747-8 AMM 27-51-01 as an accepted procedure.
f. Do a Trailing Edge Flap System - System Test. Refer to 747-8 AMM 27-51-00 as an accepted
procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
43 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 44

2. If OPTION 2 was used for PART 2: INBOARD ACCESS, do the following:
a. Remove the transmission removal and installation equipment. Refer to 747-8 AMM 27-51-33
as an accepted procedure.
b. Attach the ball screw to the transmission. Refer to 747-8 AMM 27-51-33 as an accepted
procedure.
c. Connect the applicable torque tubes to the transmission. Refer to 747-8 AMM 27-51-33 as
an accepted procedure.
d. Install the Inboard Flap Track Forward Fairing. Refer to 747-8 AMM 27-51-26 as an accepted
procedure.
e. Do the Inboard Trailing Edge Flap - Adjustment. Refer to 747-8 AMM 27-51-01 as an accepted
procedure.
f. Do a Check of the Flap Position. Refer to 747-8 AMM 27-51-01 as an accepted procedure.
g. Do a Trailing Edge Flap System - System Test. Refer to 747-8 AMM 27-51-00 as an accepted
procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1: February 26, 2016
44 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 45 (OCR)

BOEING SERVICE BULLETIN 747-57A2348
ALERT  ALERT
TRANSMISSION  FLAP TRACK
TRANSMISSION
AFT BEARING
PLATE ASSEMBLY  TRANSMISSION REMOVED
FOR CLARITY
A-A  2409295
FIGURE 1: FLAP TRACK 1 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL
(SHEET 1 OF 2)
Original Issue: June 12, 2015
Revision 1 February 26, 2016  Export Controlled ECCN: 9E991 - BOEING  747-57A2348
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  45 of 78

### Page 46

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
-2-Cotter PinRemove1
-2-NutRemove
Under nut.6-WasherRemove
Under head.2BACW10BP8CDWasherRemove / Keep
-2BACB30NR8DK21BoltRemove / Keep
Head side.2BACB28AK08-039BushingRemove / Keep
-2-Cotter PinRemove2
-2-NutRemove
Under nut. 1 washer
is used for
BACB30NR7DK20.
2 washers are used
for
BACB30LE7DK20.
4-WasherRemove
Under head.2BACW10BP7ACUWasherRemove / Keep
-2BACB30NR7DK20 OR
BACB30LE7DK20
BoltRemove / Keep
Head side.2BACB28AK07-039BushingRemove / Keep
---TRANSMISSION AFT
BEARING PLATE AS-
SEMBLY
Remove3
FIGURE 1: FLAP TRACK 1 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1 February 26, 2016
46 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 47 (OCR)

BOEING SERVICE BULLETIN 747-57A2348
ALERT  ALERT
==0
TRANSMISSION  FLAP TRACK
TRANSMISSION REMOVED
FOR CLARITY
TRANSMISSION
AFT BEARING
PLATE ASSEMBLY A-A  2409333
FIGURE 2: FLAP TRACK 2 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL
(SHEET 1 OF 2)
Original Issue: June 12, 2015
Revision 1 February 26, 2016  Export Controlled ECCN: 9E991 - BOEING  747-57A2348
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  47 of 78

### Page 48

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
-2-Cotter PinRemove1
-2-NutRemove
Under nut.4-WasherRemove
Under head.2BACW10BP8CDWasherRemove / Keep
-2BACB30LT8DK22BoltRemove / Keep
Head side.2BACB28AK08-042BushingRemove / Keep
-2-Cotter PinRemove2
-2-NutRemove
Under nut. 1 washer
is used for
BACB30LT7DK22.
2 washers are used
for
BACB30LE7DK22.
4-WasherRemove
Under head.2BACW10BP7ACUWasherRemove / Keep
-2BACB30LT7DK22 OR
BACB30LE7DK22
BoltRemove / Keep
Head side.2BACB28AK07-044BushingRemove / Keep
---TRANSMISSION AFT
BEARING PLATE AS-
SEMBLY
Remove3
FIGURE 2: FLAP TRACK 2 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1 February 26, 2016
48 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 49 (OCR)

BOEING SERVICE BULLETIN 747-57A2348
ALERT  ALERT
TRANSMISSION  FLAP TRACK
TRANSMISSION REMOVED
I FOR CLARITY
TRANSMISSION
AFT BEARING  PLATE ASSEMBLY  A-A  2409563
FIGURE 3: FLAP TRACK 3 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL
(SHEET 1 OF 2)
Original Issue: June 12, 2015
Revision 1 February 26, 2016  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-57A2348
Work - See page 1 for details.  49 of 78

### Page 50

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
-2-Cotter PinRemove1
-2-NutRemove
Under nut.8-WasherRemove
Under head.2BACW10BP7CDWasherRemove / Keep
-2BACB30NR7DK21BoltRemove / Keep
Head side.2BACB28AK07-041BushingRemove / Keep
-2-Cotter PinRemove2
-2-NutRemove
Under nut. 1 washer
is used for
BACB30NR7DK20.
2 washers are used
for
BACB30LE7BD20.
4-WasherRemove
Under head.2BACW10BP7ACUWasherRemove / Keep
-2BACB30NR7DK20 OR
BACB30LE7BD20
BoltRemove / Keep
Head side.2BACB28AK07-040BushingRemove / Keep
---TRANSMISSION AFT
BEARING PLATE AS-
SEMBLY
Remove3
FIGURE 3: FLAP TRACK 3 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1 February 26, 2016
50 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 51 (OCR)

BOEING SERVICE BULLETIN 747-57A2348
ALERT  ALERT
FLAP TRACK
TRANSMISSION
AFT BEARING
PLATE ASSEMBLY
TRANSMISSION REMOVED
FOR CLARITY
A-A  2409570
FIGURE 4: FLAP TRACK 4 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL
(SHEET 1 OF 2)
Original Issue: June 12, 2015
Revision 1 February 26, 2016  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-57A2348
Work - See page 1 for details.  51 of 78

### Page 52

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
-2-Cotter PinRemove1
-2-NutRemove
Under nut.6-WasherRemove
Under head.2BACW10BP10CDWasherRemove / Keep
-2BACB30NR10DK27BoltRemove / Keep
Head side.2BACB28AK10-053BushingRemove / Keep
-2-Cotter PinRemove2
-2-NutRemove
Under nut. 1 washer
is used for
BACB30NR9DK24.
2 washers are used
for
BACB30LE9BD24.
4-WasherRemove
Under head.2BACW10BP9ACUWasherRemove / Keep
-2BACB30NR9DK24 OR
BACB30LE9BD24
BoltRemove / Keep
Head side.2BACB28AK09-042BushingRemove / Keep
---TRANSMISSION AFT
BEARING PLATE AS-
SEMBLY
Remove3
FIGURE 4: FLAP TRACK 4 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1 February 26, 2016
52 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 53 (OCR)

BOEING SERVICE BULLETIN 747-57A2348
ALERT  ALERT
FLAP TRACK
TRANSMISSION
AFT BEARING
PLATE ASSEMBLY
TRANSMISSION REMOVED
FOR CLARITY
A-A  2409586
FIGURE 5: FLAP TRACK 5 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL
(SHEET 1 OF 2)
Original Issue: June 12, 2015
Revision 1 February 26, 2016  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-57A2348
Work - See page 1 for details.  53 of 78

### Page 54

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
-2-Cotter PinRemove1
-2-NutRemove
Under nut.6-WasherRemove
Under head.2BACW10BP10CDWasherRemove / Keep
-2BACB30NR10DK27BoltRemove / Keep
Head side.2BACB28AK10-053BushingRemove / Keep
-2-Cotter PinRemove2
-2-NutRemove
Under nut. 1 washer
is used for
BACB30NR9DK24.
2 washers are used
for
BACB30LE9BD24.
4-WasherRemove
Under head.2BACW10BP9ACUWasherRemove / Keep
-2BACB30NR9DK24 OR
BACB30LE9BD24
BoltRemove / Keep
Head side.2BACB28AK09-042BushingRemove / Keep
---TRANSMISSION AFT
BEARING PLATE AS-
SEMBLY
Remove3
FIGURE 5: FLAP TRACK 5 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1 February 26, 2016
54 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 55 (OCR)

BOEING SERVICE BULLETIN 747-57A2348
ALERT  ALERT
FLAP TRACK  TRANSMISSION
TRANSMISSION REMOVED
FOR CLARITY
A-A  TRANSMISSION  PLATE ASSEMBLY  AFT BEARING  2409568
FIGURE 6: FLAP TRACK 6 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL
(SHEET 1 OF 2)
Original Issue: June 12, 2015
Revision 1 February 26, 2016  PROPRIETARY - Copyright ® Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-57A2348
Work - See page 1 for details.  55 of 78

### Page 56

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
-2-Cotter PinRemove1
-2-NutRemove
Under nut.8-WasherRemove
Under head.2BACW10BP7CDWasherRemove / Keep
-2BACB30NR7DK21BoltRemove / Keep
Head side.2BACB28AK07-041BushingRemove / Keep
-2-Cotter PinRemove2
-2-NutRemove
Under nut. 1 washer
is used for
BACB30NR7DK20.
2 washers are used
for
BACB30LE7BD20.
4-WasherRemove
Under head.2BACW10BP7ACUWasherRemove / Keep
-2BACB30NR7DK20 OR
BACB30LE7BD20
BoltRemove / Keep
Head side.2BACB28AK07-040BushingRemove / Keep
---TRANSMISSION AFT
BEARING PLATE AS-
SEMBLY
Remove3
FIGURE 6: FLAP TRACK 6 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1 February 26, 2016
56 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 57 (OCR)

BOEING SERVICE BULLETIN 747-57A2348
ALERT  ALERT
FLAP TRACK  TRANSMISSION
TRANSMISSION REMOVED
FOR CLARITY
TRANSMISSION
AFT BEARING
PLATE ASSEMBLY
A-A  2409349
FIGURE 7: FLAP TRACK 7 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL
(SHEET 1 OF 2)
Original Issue: June 12, 2015
Revision 1 February 26, 2016  PROPRIETARY - Copyright ® Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-57A2348
Work - See page 1 for details.  57 of 78

### Page 58

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
-2-Cotter PinRemove1
-2-NutRemove
Under nut.4-WasherRemove
Under head.2BACW10BP8CDWasherRemove / Keep
-2BACB30LT8DK22BoltRemove / Keep
Head side.2BACB28AK08-042BushingRemove / Keep
-2-Cotter PinRemove2
-2-NutRemove
Under nut. 1 washer
is used for
BACB30LT7DK22.
2 washers are used
for
BACB30LE7DK22.
4-WasherRemove
Under head.2BACW10BP7ACUWasherRemove / Keep
-2BACB30LT7DK22 OR
BACB30LE7DK22
BoltRemove / Keep
Head side.2BACB28AK07-044BushingRemove / Keep
---TRANSMISSION AFT
BEARING PLATE AS-
SEMBLY
Remove3
FIGURE 7: FLAP TRACK 7 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1 February 26, 2016
58 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

### Page 59 (OCR)

BOEING SERVICE BULLETIN 747-57A2348
ALERT  ALERT
FLAP TRACK
TRANSMISSION REMOVED
FOR CLARITY
TRANSMISSION
AFT BEARING
PLATE ASSEMBLY
A-A  2409323
FIGURE 8: FLAP TRACK 8 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL
(SHEET 1 OF 2)
Original Issue: June 12, 2015
Revision 1 February 26, 2016  PROPRIETARY - Copyright ® Unpublished  Export Controlled ECCN: 9E991 - BOEING  747-57A2348
Work - See page 1 for details.  59 of 78

### Page 60

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
-2-Cotter PinRemove1
-2-NutRemove
Under nut.6-WasherRemove
Under head.2BACW10BP8CDWasherRemove / Keep
-2BACB30NR8DK21BoltRemove / Keep
Head side.2BACB28AK08-039BushingRemove / Keep
-2-Cotter PinRemove2
-2-NutRemove
Under nut. 1 washer
is used for
BACB30NR7DK20.
2 washers are used
for
BACB30LE7DK20.
4-WasherRemove
Under head.2BACW10BP7ACUWasherRemove / Keep
-2BACB30NR7DK20 OR
BACB30LE7DK20
BoltRemove / Keep
Head side.2BACB28AK07-039BushingRemove / Keep
---TRANSMISSION AFT
BEARING PLATE AS-
SEMBLY
Remove3
FIGURE 8: FLAP TRACK 8 - TRANSMISSION AFT BEARING PLATE ASSEMBLY - REMOVAL
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 12, 2015
747-57A2348Revision 1 February 26, 2016
60 of 78
BOEING SERVICE BULLETIN 747-57A2348
ALERTALERT

The text continues at https://openairdocs.org/service-documents/boeing/747-57a2348/file/90b1cb61ad96.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
