# Boeing Special Attention Requirements Bulletin 757-25-0315 RB: 757-25-0315 RB-02

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2020-1022; AD 2022-07-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Requirements Bulletin 757-25-0315 RB](https://openairdocs.org/service-documents/boeing/757-25-0315-rb.md)
- Title as filed: 757-25-0315 RB-02
- Pages: 116
- PDF: https://openairdocs.org/files/sha256/b0/b0/b0b0aefb158f7badf9a2d4c5bf95392c660788532caf1a14805ad55e30ac0661
- Page: https://openairdocs.org/service-documents/boeing/757-25-0315-rb/file/b0b0aefb158f

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Number: 757-25-0315
Original Issue: February 22, 2019
Revision 2: March 17, 2021
ATA System: 2523
SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Passenger Service Unit
Lanyard Assemblies Installation
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
Copyright © 2019 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
1 of 96
2.0

### Page 2

Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
2 of 96
BOEING SERVICE BULLETIN 757-25-0315
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 29
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 36
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 38
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
FIGURE 1: PASSENGER SERVICE UNIT PANEL, LANYARD ASSEMBLIES - INSTALLATION [Group 1-3,
5, 7] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
FIGURE 2: LIFE VEST PANEL, LANYARD ASSEMBLIES - INSTALLATION [Group 2, 5, 7] . . . . . . 51
FIGURE 3: VIDEO PANEL, LANYARD ASSEMBLIES - INSTALLATION [Group 3] . . . . . . . . . . . 57
FIGURE 4: PASSENGER SERVICE UNIT PANEL, LANYARD ASSEMBLIES - INSTALLATION [Group 4,
6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
APPENDIX A: PASSENGER SERVICE UNIT PANEL ASSEMBLY - REIDENTIFICATION [Group 1-3, 5, 7]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
APPENDIX B: LIFE VEST PANEL ASSEMBLY - REIDENTIFICATION  [Group 2] . . . . . . . . . . . . . 82
APPENDIX C: VIDEO PANEL ASSEMBLY - REIDENTIFICATION [Group 3] . . . . . . . . . . . . . . . . 83
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
3 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 4

APPENDIX D: PASSENGER SERVICE UNIT PANEL ASSEMBLY - REIDENTIFICATION  [Group 4, 6] . 84
APPENDIX E: PART DEMAND INTENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
APPENDIX F: LIFE VEST PANEL ASSEMBLY - REIDENTIFICATION  [Group 5, 7] . . . . . . . . . . . . 96
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
4 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 5

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 757-25-0315Original Issue: February 22, 2019
Revision 2: March 17, 2021
ATA System: 2523
SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Passenger Service Unit
Lanyard Assemblies Installation
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
RC: Start
Federal Aviation Administration (FAA) Notice of Proposed Rule Making 2020-01101-T, is related to Requirements
Bulletin 757-25-0315 RB.
Airplane variable numbers NB324, NB326, NB451, and NC071 were added to new Group 6 of this bulletin
effectivity.
Airplane variable number NB295 was added to new Group 7 of this bulletin effectivity.
Effects of this Revision on airplanes on which Revision 1 of Requirements Bulletin 757-25-0315 RB was previously
done:
ActionConditionGroup
No further action required provided
the airplane configuration remains
unchanged.
Airplanes equipped with PSU pan-
els.
Group 1, Configuration 3; Group 4,
Configuration 4
No further action required provided
the airplane configuration remains
unchanged.
Airplanes equipped with PSU panels
and life vest panels.
Group 2, 5, Configuration 3
No further action required provided
the airplane configuration remains
unchanged.
Airplanes equipped with PSU panels
and video panels.
Group 3, Configuration 3
RC: End
REASON FOR REVISION
RC: Start
This revision is sent to:
- add new airplanes to new groups that have been modified to Combi configuration and
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
5 of 96

### Page 6

- add PSU panel assembly part numbers to support the added Combi effectivities.
These sections were changed:
RC: End
- In Summary Action, added new groups and configurations applicability.
- In Summary Compliance, added NPRM information.
- In Summary Illustration, added new groups and configurations applicability.
RC: Start
- In Airplanes, added airplanes and added new groups and configurations.
RC: End
- In 1.C., Reason, added Revision 2 information.
- In 1.D., Description, added new groups and configurations applicability and Revision 2 information.
RC: Start
- In Compliance, added NPRM information, changed information, added Table 7 and 8, and added new groups
and configurations applicability.
RC: End
- In 1.G., Manpower, added new groups and configurations applicability.
- In 1.H., Weight and Balance Changes, added new groups applicability.
- In 1.J., References, added NPRM information.
- In 2.A., Material - Price and Availability, changed information and added new groups applicability.
- In 2.C.1., Kits/Parts, added new groups applicability.
- In 2.C.2., Parts and Materials Supplied by the Operator, changed footnote and added new groups applicability.
RC: Start
- In Work Instructions, Actions Required for Compliance, added new groups and configurations applicability.
RC: End
- In 3.B., Work Instructions, Procedures, added new groups applicability.
- In Figure 1, added new group applicability.
- In Figure 2, added new group applicability.
- In Figure 4, added new group applicability.
- In Appendix A, added new group applicability.
- In Appendix D, added part numbers and added new group applicability.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
6 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 7

- In Appendix F, added new group applicability.
RC: Start
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Pages with no vertical lines have no changes.
RC: End
REVISION HISTORY
Requirement BulletinRequirement BulletinService BulletinService Bulletin
757-25-0315 RB757-25-0315 RB757-25-0315757-25-0315
Issue DateIssue Date
February 22, 2019Original Issue:February 22, 2019Original Issue:
May 20, 2020Revision 1:May 20, 2020Revision 1:
March 17, 2021Revision 2:March 17, 2021Revision 2:
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
7 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 8

Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
8 of 96
BOEING SERVICE BULLETIN 757-25-0315
BLANK PAGE

### Page 9

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 757-25-0315Original Issue: February 22, 2019
Revision 2: March 17, 2021
ATA System: 2523
SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Passenger Service Unit
Lanyard Assemblies Installation
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY. THIS IS
AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE
THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE
INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION
IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB WHICH THE SB REFERS
TO AS THE RELATED DOCUMENT.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin gives instructions to add a secondary method of retention to each Passenger Service Unit
(PSU) panel, life vest panel and video panel, to prevent them from becoming detached during a situation that
exceeds emergency load requirements. If this service bulletin is not done, the PSU panels, life vest panels and
video panels may become detached when emergency load requirements are exceeded and could result in injury
to passengers and could impede passenger and crew egress during evacuation.
In four survivable 737 hull loss accident and one 757 runway overrun accident in which the landing condition
loads were possibly more than the design loads, PSU panels and life vest panels became detached from
supporting structure in the airplane. The design of these PSU panels, life vest panels and video panels meet
the applicable emergency load requirements of Federal Aviation Regulation (FAR) 25.561. However, to enhance
the safety of the airplane, Boeing has changed the design to add a secondary retention device for the PSU
panels (the rigid plastic (Ultem) and aluminum types), life vest panels to prevent detachment and falling lower
than a specific height in the passenger compartment during a survivable hull loss accident. Video panels are
also included in the design change. This service bulletin changes the PSU panels, life vest panels and video
panels, to install additional lanyard assemblies.
This service bulletin gives instructions to install lanyard assemblies on the PSU panels, life vest panels and
video panels, as applicable. The added lanyard assemblies give a secondary method of retention during survivable
hull loss emergency landings and decrease the risk of injury to passengers and evacuation hindrance.
Boeing Fleet Team Digest 757 FTD 25-18001 is related to this service bulletin.
Boeing Service Related Problems (SRP) 757-SRP-25-0391 and 757-SRP-25-0409 are related to this service
bulletin.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
9 of 96

### Page 10

This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedYesSpares Affected
Refer to Requirements Bulletin 757-25-0315 RBYesAD Related
Paragraph 1.H., Weight and Balance ChangesYesWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsYesKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION (PRR 54530-336R)
Group 1, 4, Configuration 1; Group 4, Configuration 2; Group 6:
Install additional lanyard assemblies on each PSU panel.
Group 1, Configuration 2-3; Group 2-4, Configuration 3; Group 4, Configuration 4; Group 5, Configuration
3:
No further action required provided the airplane configuration remains unchanged.
Group 2, 5, Configuration 1; Group 7:
Install additional lanyard assemblies on each PSU panel and each life vest panel.
Group 2, 5, Configuration 2:
Install additional lanyard assemblies on each life vest panel.
Group 3, Configuration 1:
Install additional lanyard assemblies on each PSU panel and each video panel.
Group 3, Configuration 2:
Install additional lanyard assemblies on each video panel.
EFFECTIVITY
757-200/200CB/300 Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).
Refer to Paragraph 1.A.2., Spares Affected, for the list of affected components.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
10 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 11

COMPLIANCE
Federal Aviation Administration (FAA) Notice of Proposed Rule Making 2020-01101-T, is related to Requirements
Bulletin 757-25-0315 RB.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
Operators are encouraged to complete the survey provided in APPENDIX E of this service bulletin to help Boeing
predict the quantity and timing of the Boeing Supplied Kits/Parts.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
11 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 12 (OCR)

BOEING SERVICE BULLETIN 757-25-0315
GROUP 1, 4, CONFIGURATION 1; GROUP 4, CONFIGURATION2; GROUP 6:
INSTALL ADDITIONAL LANYARD ASSEMBLIES ON EACH PSU PANEL.
GROUP 1, CONFIGURATION 2-3; GROUP 2-4, CONFIGURATION 3; GROUP 4, CONFIGURATION4; GROUP
5, CONFIGURATION 3:
NO FURTHER ACTION REQUIRED PROVIDED THE AIRPLANE CONFIGURATION REMAINS UNCHANGED.
GROUP 2, 5, CONFIGURATION 1; GROUP 7
NSTALL ADDITIONAL LANYARD ASSEMBLIES ON EACH PSU PANEL AND EACH LIFE VEST PANEL
GROUP 2, 5, CONFIGURATION 2:
INSTALL ÄDDITIONAL LANYARD ASSEMBLIES ON EACH LIFE VEST PANEL.
GROUP 3, CONFIGURATION 1:
INSTALL ADDITIONAL LANYARD ASSEMBLIES ON EACH PSU PANEL AND EACH VIDEO PANEL.
GROUP 3, CONFIGURATION 2:  INSTALL ADDITIONAL LANYARD ASSEMBLIES ON EACH VIDEO PANEL.  2840089
Original Issue: February 22, 2019
Revision 2: March 17, 2021  Export Controlled ECCN: 9E991  757-25-0315
Copyright © Unpublished
Work - See page 1 for details.  12 of 96

### Page 13

Commercial 
Airplanes
757
Service Bulletin
SPECIAL ATTENTION
Number: 757-25-0315
Original Issue: February 22, 2019
Revision 2: March 17, 2021
ATA System: 2523
SUBJECT: EQUIPMENT/FURNISHINGS - Passenger Compartment - Passenger Service Unit
Lanyard Assemblies Installation
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY. THIS IS
AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE
THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE
INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION
IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB WHICH THE SB REFERS
TO AS THE RELATED DOCUMENT.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
RC: Start
This bulletin is applicable to 757-200, 757-200CB, 757-300 Airplane(s), line number(s) 1-2, 5, 8,
14, 18-19, 62, 65, 76, 83, 96-97, 99, 102, 107, 115, 117, 130, 142, 144, 148, 150-151, 156, 165,
169, 171, 177, 180, 182, 187, 218, 221, 227, 229-230, 233, 236, 238-242, 246-249, 254, 256, 262,
264-265, 268, 276, 278, 281, 287, 290, 292-294, 297-298, 301-302, 304, 307, 310-311, 313, 315,
317, 320, 329, 331-332, 335-339, 342-347, 349-352, 354-355, 357, 359-360, 367-371, 373,
375-377, 379, 381-384, 387, 391-392, 396-398, 401-402, 404-406, 408-410, 412-413, 415-420,
422-427, 429-432, 434-437, 439, 442-444, 447-448, 454-455, 459-463, 465, 467-471, 473-474,
478-479, 483-484, 486-488, 490, 492, 494, 496, 498, 500, 502, 504, 507, 509, 511, 516, 518-519,
521, 523-524, 530, 532-533, 535-537, 541, 545, 553, 555, 557, 560-561, 566, 568, 570-572, 578,
580, 582, 587, 590, 592-594, 596-597, 599, 602-603, 605-611, 614, 616-617, 619-620, 623,
626-627, 629-630, 632-633, 635, 637, 641, 643, 645, 647-648, 650, 652-653, 655, 660-661,
663-668, 670, 673, 677-678, 680-682, 684, 686, 689-690, 693-697, 699-703, 705-717, 720-722,
725-726, 731-732, 735-736, 740-744, 748, 753-754, 757-758, 760-761, 764, 766, 768, 772-773,
775, 780-783, 785-792, 794-796, 799-801, 803-810, 818, 820, 824-831, 834-835, 837-842, 844-846,
848-864, 866-867, 869-872, 874-876, 878, 880-881, 883-888, 890-903, 905-909, 911-927, 929-931,
933-942, 944-947, 949-960, 962-965, 967-973, 975-997, 999-1005, 1007-1014, 1016-1050 in 7
Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane
applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through
9 inclusive.
RC: End
Refer to Service Bulletin Index D624N001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
13 of 96

### Page 14

RC: Start
The Variable Numbers and Group Information for the applicable airplanes is given below.
DESCRIPTIONCONFIGURATIONGROUP
757-200/300 Airplanes equipped with rigid plastic Passenger Service
Unit panels, part number 417N3011-( ).
-1
Airplanes that have not done the Original Issue or Revision 1 of this
Service Bulletin.
1
Airplanes that have done the Original Issue but have not done
Revision 1 of this Service Bulletin.
2
Airplanes that have done Revision 1 of this Service Bulletin.3
757-200/300 Airplanes equipped with rigid plastic Passenger Service
Unit panels, part number 417N3011-( ) and life vest panels, part
number 417N3070-( ).
-2
Airplanes that have not done the Original Issue or Revision 1 of this
Service Bulletin.
1
Airplane variable numbers NB454, NE007 - NE008, and NU731 -
NU732 that have done the Original Issue but have not done Revision
1 of this Service Bulletin.
2
Airplanes that have done Revision 1 of this Service Bulletin.3
757-200 Airplanes equipped with rigid plastic Passenger Service Unit
panels, part number 417N3011-( ) and video panels, part number
417N3021-( ).
-3
Airplanes that have not done the Original Issue or Revision 1 of this
Service Bulletin.
1
Airplane variable numbers ND241 - ND248, ND301 - ND322, NT240,
and NT751 - NT769 that have done the Original Issue but have not
done Revision 1 of this Service Bulletin.
2
Airplanes that have done Revision 1 of this Service Bulletin.3
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
14 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 15

DESCRIPTIONCONFIGURATIONGROUP
757-200/200CB Airplanes equipped with aluminum Passenger Service
Unit panels, part number 417N3100-( ).
-4
Airplanes that have not done the Original Issue or Revision 1 of this
Service Bulletin.
1
Airplane variable number NA509 that has done the Original Issue
but has not done Revision 1 of this Service Bulletin.
2
Airplanes that have done the Original Issue but have not done
Revision 1 of this Service Bulletin.
3
Airplanes that have done Revision 1 of this Service Bulletin.4
757-200 Airplanes equipped with rigid plastic Passenger Service Unit
panels, part number 417N3011-( ) and life vest panels, part number
417N3014-( ).
-5
Airplanes that have not done the Original Issue or Revision 1 of this
Service Bulletin.
1
Airplane variable numbers NB453 and NE006 that have done the
Original Issue but have not done Revision 1 of this Service Bulletin.
2
Airplanes that have done Revision 1 of this Service Bulletin.3
757-200 Airplanes equipped with aluminum Passenger Service Unit
panels, part number 417N3100-( ), that have been modified to Combi
configuration.
-6
757-200 Airplane equipped with rigid plastic Passenger Service Unit
panels, part number 417N3011-( ) and life vest panels, part number
417N3014-( ), that has been modified to Combi configuration.
-7
Airplane Models:
757-200, 757-200CB, 757-300
GroupVariable Number
4NA001 - NA002
4NA005
4NA008
4NA025 - NA027
4NA198
4NA205
GroupVariable Number
4NA238 - NA239
4NA301
4NA342
4NA344
4NA396 - NA397
4NA402 - NA403
GroupVariable Number
4NA442
4NA447
4NA509
4NA537 - NA538
4NA549 - NA552
4NA554 - NA555
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
15 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 16

GroupVariable Number
4NA558 - NA576
4NA578 - NA584
1NA585 - NA586
4NB021
4NB036 - NB038
4NB041
4NB053
4NB061 - NB063
4NB067 - NB068
4NB071 - NB072
4NB079
4NB136
4NB141
4NB143 - NB147
1NB148
1NB161 - NB162
1NB168
4NB202
4NB239
4NB261
4NB263 - NB264
7NB295
4NB311 - NB312
6NB324
6NB326
4NB330 - NB331
4NB431
4NB434
4NB436
4NB438
6NB451
4NB452
5NB453
GroupVariable Number
2NB454
1NB512 - NB517
1NB520 - NB523
1NB561
4NC005
4NC012
4NC017
4NC051
4NC056
1NC058
1NC060 - NC061
4NC066
4NC068 - NC070
6NC071
1NC074 - NC084
1NC091
1NC093
1NC151
4ND002
4ND012 - ND014
4ND017
4ND021
4ND025
4ND027
4ND030
4ND032
4ND037 - ND044
4ND046
4ND048 - ND055
4ND057 - ND059
1ND111 - ND113
4ND161 - ND162
4ND164 - ND166
GroupVariable Number
4ND168 - ND179
4ND181
4ND184 - ND185
1ND186 - ND188
1ND190 - ND199
4ND202 - ND203
3ND241 - ND248
3ND301 - ND322
4ND891
4ND895
4NE003 - NE004
5NE006
2NE007 - NE008
4NE011 - NE013
4NE015
4NE020
4NE022
4NE026 - NE028
4NE030
4NE032 - NE036
4NE038 - NE039
4NE043
4NE045
4NE047
4NE052 - NE066
4NE068
4NE076
4NE087 - NE088
4NE141 - NE144
4NE146
4NE148 - NE150
4NE166 - NE168
4NE170 - NE171
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
16 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 17

GroupVariable Number
4NE174 - NE177
4NE202 - NE204
1NE311 - NE325
1NJ001 - NJ004
1NJ031 - NJ032
1NJ551 - NJ555
1NL001 - NL002
1NL006 - NL017
1NL101 - NL109
1NL141
1NL601 - NL616
1NN001 - NN002
1NN051 - NN052
1NP901 - NP904
1NT231
1NT233 - NT234
GroupVariable Number
3NT240
1NT242
1NT245 - NT247
1NT284 - NT289
1NT341 - NT345
1NT347
1NT352 - NT360
1NT371 - NT373
1NT375
1NT379
1NT404 - NT407
1NT411 - NT412
1NT426 - NT427
4NT431 - NT432
1NT436 - NT438
1NT441 - NT442
GroupVariable Number
1NT446
1NT701 - NT730
1NT734 - NT737
1NT739 - NT750
3NT751 - NT769
4NT791 - NT796
1NT861 - NT862
1NT882 - NT883
1NT901 - NT903
1NT905 - NT914
1NT971 - NT980
1NT982 - NT985
1NU031 - NU038
1NU701 - NU705
1NU721 - NU728
2NU731 - NU732
RC: End
RC: Start
2. Spares Affected
Examine your spares supply for the parts identified in Service Bulletin 757-25-0315 APPENDIX
A, APPENDIX B, APPENDIX C, APPENDIX D and APPENDIX F. If any parts or components are
found, refer to Service Bulletin 757-25-0315, Paragraph 3.B., WORK INSTRUCTIONS, Procedures,
Part 5 through Part 8, 'Component Work', for the recommended action.
RC: End
RC: Start
B. Concurrent Requirements
None.
RC: End
C. Reason
This service bulletin gives instructions to add a secondary method of retention to each Passenger
Service Unit (PSU) panel, life vest panel and video panel, to prevent them from becoming detached
during a situation that exceeds emergency load requirements. If this service bulletin is not done, the
PSU panels, life vest panels and video panels may become detached when emergency load
requirements are exceeded and could result in injury to passengers and could impede passenger and
crew egress during evacuation.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
17 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 18

In four survivable 737 hull loss accident and one 757 runway overrun accident in which the landing
condition loads were possibly more than the design loads, PSU panels and life vest panels became
detached from supporting structure in the airplane. The design of these PSU panels, life vest panels
and video panels meet the applicable emergency load requirements of Federal Aviation Regulation
(FAR) 25.561. However, to enhance the safety of the airplane, Boeing has changed the design to add
a secondary retention device for the PSU panels (the rigid plastic (Ultem) and aluminum types), life
vest panels to prevent detachment and falling lower than a specific height in the passenger compartment
during a survivable hull loss accident. Video panels are also included in the design change. This service
bulletin changes the PSU panels, life vest panels and video panels, to install additional lanyard
assemblies.
This service bulletin gives instructions to install lanyard assemblies on the PSU panels, life vest panels
and video panels, as applicable. The added lanyard assemblies give a secondary method of retention
during survivable hull loss emergency landings and decrease the risk of injury to passengers and
evacuation hindrance.
Boeing Fleet Team Digest 757 FTD 25-18001 is related to this service bulletin.
Boeing Service Related Problems (SRP) 757-SRP-25-0391 and 757-SRP-25-0409 are related to this
service bulletin.
Revision 1 was sent to:
- add a new group for airplanes equipped with different life vest panels,
- add life vest panel assembly part numbers that were missing in the Original Issue,
- move airplanes between groups to agree with PSU panel, life vest panel, and video panel
configurations,
- establish configurations and additional work necessary for airplanes that moved between groups and
have done the Original Issue,
- remove an airplane from the bulletin effectivity that is a Boeing special freighter,
- remove PSU panel assembly part numbers that are not applicable to 757 airplanes, and
- update the approval information for 757-200CB.
Revision 2 is sent to:
- add new airplanes to new groups that have been modified to Combi configuration and
- add PSU panel assembly part numbers to support the added Combi effectivities.
D. Description
Group 1, 4, Configuration 1; Group 4, Configuration 2; Group 6:
Install additional lanyard assemblies on each PSU panel.
Group 1, Configuration 2-3; Group 2-4, Configuration 3; Group 4, Configuration 4; Group 5,
Configuration 3:
No further action required provided the airplane configuration remains unchanged.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
18 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 19

Group 2, 5, Configuration 1; Group 7:
Install additional lanyard assemblies on each PSU panel and each life vest panel.
Group 2, 5, Configuration 2:
Install additional lanyard assemblies on each life vest panel.
Group 3, Configuration 1:
Install additional lanyard assemblies on each PSU panel and each video panel.
Group 3, Configuration 2:
Install additional lanyard assemblies on each video panel.
Effects of Revision 2 on airplanes on which Revision 1 of Requirements Bulletin 757-25-0315 RB was
previously done:
ActionConditionGroup
No further action required provided
the airplane configuration remains
unchanged.
Airplanes equipped with PSU pan-
els.
Group 1, Configuration 3; Group 4,
Configuration 4
No further action required provided
the airplane configuration remains
unchanged.
Airplanes equipped with PSU panels
and life vest panels.
Group 2, 5, Configuration 3
No further action required provided
the airplane configuration remains
unchanged.
Airplanes equipped with PSU panels
and video panels.
Group 3, Configuration 3
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1-2:
Affected Maintenance Zones
ZoneModel
221, 222, 231, 232, 241, 242, 251, 252757-200, 757-300
Group 3, 5-7:
Affected Maintenance Zones
ZoneModel
221, 222, 231, 232, 241, 242, 251, 252757-200
Group 4:
Affected Maintenance Zones
ZoneModel
221, 222, 231, 232, 241, 242, 251, 252757-200, 757-200CB
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
19 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 20

RC: Start
E. Compliance
Federal Aviation Administration (FAA) Notice of Proposed Rule Making 2020-01101-T, is related to
Requirements Bulletin 757-25-0315 RB.
Accomplish the required action(s), based on the applicable condition(s) in Tables 1 through 8, in
accordance with the Accomplishment Instructions.
Group 1, Configuration 1:
Table 1: PSU Panel, Lanyard Assemblies - Installation
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 60 months
after the Revision
1 date of Require-
ments Bulletin
757-25-0315 RB.
Install additional nylon coat-
ed stainless steel lanyards
on each Passenger Service
Unit (PSU) panel, such that
in the event of a survivable
accident, any detached PSU
panel does not extend lower
than Body Water Line (BWL)
265.7.
All Airplanes
Group 2, 5, Configuration 1:
Table 2: PSU Panel and Life Vest Panel, Lanyard Assemblies - Installation
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 60 months
after the Revision
1 date of Require-
ments Bulletin
757-25-0315 RB.
Install additional nylon coat-
ed stainless steel lanyards
on each PSU panel and life
vest panel, such that in the
event of a survivable acci-
dent, any detached PSU
panel and any detached life
vest panel do not extend
lower than Body Water Line
(BWL) 265.7.
All Airplanes
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
20 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 21

Group 3, Configuration 1:
Table 3: PSU Panel and Video Panel, Lanyard Assemblies - Installation
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 60 months
after the Revision
1 date of Require-
ments Bulletin
757-25-0315 RB.
Install additional nylon coat-
ed stainless steel lanyards
on each PSU panel and
video panel, such that in the
event of a survivable acci-
dent, any detached PSU
panel and any detached
video panel do not extend
lower than Body Water Line
(BWL) 265.7.
All Airplanes
Group 4, Configuration 1-2:
Table 4: PSU Panel, Lanyard Assemblies - Installation
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 60 months
after the Revision
1 date of Require-
ments Bulletin
757-25-0315 RB.
Install additional nylon coat-
ed stainless steel lanyards
on each PSU panel, such
that in the event of a surviv-
able accident, any detached
PSU panel does not extend
lower than Body Water Line
(BWL) 265.7.
All Airplanes
Group 2, 5, Configuration 2:
Table 5: Life Vest Panel, Lanyard Assemblies - Installation
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 60 months
after the Revision
1 date of Require-
ments Bulletin
757-25-0315 RB.
Install additional nylon coat-
ed stainless steel lanyards
on each life vest panel, such
that in the event of a surviv-
able accident, any detached
life vest panel does not ex-
tend lower than Body Water
Line (BWL) 265.7.
All Airplanes
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
21 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 22

Group 3, Configuration 2:
Table 6: Video Panel, Lanyard Assemblies - Installation
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 60 months
after the Revision
1 date of Require-
ments Bulletin
757-25-0315 RB.
Install additional nylon coat-
ed stainless steel lanyards
on each video panel, such
that in the event of a surviv-
able accident, any detached
video panel does not extend
lower than Body Water Line
(BWL) 265.7.
All Airplanes
Group 6:
Table 7: PSU Panel, Lanyard Assemblies - Installation
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 60 months
after the Revision
2 date of Require-
ments Bulletin
757-25-0315 RB.
Install additional nylon coat-
ed stainless steel lanyards
on each PSU panel, such
that in the event of a surviv-
able accident, any detached
PSU panel does not extend
lower than Body Water Line
(BWL) 265.7.
All Airplanes
Group 7:
Table 8: PSU Panel and Life Vest Panel, Lanyard Assemblies - Installation
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 60 months
after the Revision
2 date of Require-
ments Bulletin
757-25-0315 RB.
Install additional nylon coat-
ed stainless steel lanyards
on each PSU panel and life
vest panel, such that in the
event of a survivable acci-
dent, any detached PSU
panel and any detached life
vest panel do not extend
lower than Body Water Line
(BWL) 265.7.
All Airplanes
Group 1, Configuration 2-3; Group 2-4, Configuration 3; Group 4, Configuration 4; Group 5,
Configuration 3:
No further action required provided the airplane configuration remains unchanged.
RC: End
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
22 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 23

F. Approval
NOTE: The approval statement that follows is valid for all affected airplanes, except 757-200CB
airplanes.
This service bulletin was examined by the Boeing Company Organization Designation Authorization
(ODA). The changes specified in this service bulletin comply with the applicable regulations and are
FAA approved, as well as European Union Aviation Safety Agency (EASA)/Joint Aviation Authorities
(JAA) approved for all EASA/JAA approved airplanes listed in the service bulletin effectivity. This service
bulletin and its approval were based on the airplane in its original Boeing delivery configuration or as
modified by other approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
NOTE: The approval statement that follows is valid for 757-200CB airplanes.
This service bulletin was examined by the Boeing Company Organization Designation Authorization
(ODA). The changes specified in this service bulletin comply with the applicable regulations and are
FAA approved for the airplanes listed in the service bulletin effectivity. This service bulletin and its
approval were based on the airplane in its original Boeing delivery configuration or as modified by other
approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The tables below show an estimate of the task hours necessary to do this change for each PSU panel,
life vest panel or video panel. This estimate is for direct labor only, done by an experienced crew. Adjust
the estimate with operator task hour data if necessary. The estimate does not include lost time. These
are some examples of lost time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools
Group 1, Configuration 1:
PART 1: PASSENGER SERVICE UNIT PANEL, LANYARD ASSEMBLIES - INSTALLATION - AIR-
PLANE WORK
Elapsed HoursTask HoursNumber of PersonsTask
0.050.051Open Access
0.300.301FIGURE 1
0.050.051Close Access
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
23 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 24

Group 1, Configuration 1:
PART 1: PASSENGER SERVICE UNIT PANEL, LANYARD ASSEMBLIES - INSTALLATION - AIR-
PLANE WORK
Elapsed HoursTask HoursNumber of PersonsTask
0.400.40TOTAL FOR ONE PSU PANEL FOR EACH
AIRPLANE
Group 2, 5, Configuration 1; Group 7:
PART 2: PASSENGER SERVICE UNIT PANEL AND LIFE VEST PANEL, LANYARD ASSEMBLIES
- INSTALLATION - AIRPLANE WORK
Elapsed HoursTask HoursNumber of PersonsTask
0.050.051Open Access
0.300.301FIGURE 1 or FIGURE
2
0.050.051Close Access
0.400.40TOTAL FOR ONE PSU PANEL OR LIFE VEST
PANEL FOR EACH AIRPLANE
Group 3, Configuration 1:
PART 3: PASSENGER SERVICE UNIT PANEL AND VIDEO PANEL, LANYARD ASSEMBLIES -
INSTALLATION - AIRPLANE WORK
Elapsed HoursTask HoursNumber of PersonsTask
0.050.051Open Access
0.300.301FIGURE 1 or FIGURE
3
0.050.051Close Access
0.400.40TOTAL FOR ONE PSU PANEL OR VIDEO
PANEL FOR EACH AIRPLANE
Group 4, Configuration 1-2; Group 6:
PART 4: PASSENGER SERVICE UNIT PANEL, LANYARD ASSEMBLIES - INSTALLATION - AIR-
PLANE WORK
Elapsed HoursTask HoursNumber of PersonsTask
0.050.051Open Access
0.350.351FIGURE 4
0.050.051Close Access
0.450.45TOTAL FOR ONE PSU PANEL FOR EACH
AIRPLANE
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
24 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 25

PART 5: PASSENGER SERVICE UNIT PANEL, LANYARD ASSEMBLIES - INSTALLATION -
COMPONENT WORK: 417N3011-( )
Elapsed HoursTask HoursNumber of PersonsTask
0.300.301FIGURE 1
0.300.30TOTAL FOR EACH PSU PANEL
PART 6: LIFE VEST PANEL, LANYARD ASSEMBLIES - INSTALLATION - COMPONENT WORK:
417N3070-( ), 417N3014-( )
Elapsed HoursTask HoursNumber of PersonsTask
0.300.301FIGURE 2
0.300.30TOTAL FOR EACH LIFE VEST PANEL
PART 7: VIDEO PANEL, LANYARD ASSEMBLIES - INSTALLATION - COMPONENT WORK:
417N3021-( )
Elapsed HoursTask HoursNumber of PersonsTask
0.300.301FIGURE 3
0.300.30TOTAL FOR EACH VIDEO PANEL
PART 8: PASSENGER SERVICE UNIT PANEL, LANYARD ASSEMBLIES - INSTALLATION -
COMPONENT WORK: 417N3100-( )
Elapsed HoursTask HoursNumber of PersonsTask
0.350.351FIGURE 4
0.350.35TOTAL FOR EACH PSU PANEL
Group 2, 5, Configuration 2:
PART 9: LIFE VEST PANEL, LANYARD ASSEMBLIES - INSTALLATION - AIRPLANE WORK
Elapsed HoursTask HoursNumber of PersonsTask
0.050.051Open Access
0.300.301FIGURE 2
0.050.051Close Access
0.400.40TOTAL FOR ONE LIFE VEST PANEL FOR
EACH AIRPLANE
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
25 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 26

Group 3, Configuration 2:
PART 10: VIDEO PANEL, LANYARD ASSEMBLIES - INSTALLATION - AIRPLANE WORK
Elapsed HoursTask HoursNumber of PersonsTask
0.050.051Open Access
0.300.301FIGURE 3
0.050.051Close Access
0.400.40TOTAL FOR ONE VIDEO PANEL FOR EACH
AIRPLANE
H. Weight and Balance Changes
Group 1:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
(b)+0.03 (a)757-200
(c)+0.03 (a)757-300
(a) The value is for one changed PSU panel. Multiply by the number of PSU panels changed
to get the total Change in Weight. Use one of the methods that follow (although Method
1 is the recommendation) to find the number of PSU panels:
– Method 1 - Count the PSU panels manually.
– Method 2 - Use the total number of seat groups to get an estimate, for example,
triples plus doubles plus singles.
– Method 3 - Use the number of revenue passengers divided by 3 to get an estimate,
for example 200 divided by 3 equals 67 PSU panels.
(b) To calculate the Change in Moment, use the total change in weight multiplied by 1011
to get the change in moment. 1011 is the typical balance arm length in inches.
(c) To calculate the Change in Moment, use the total change in weight multiplied by 991
to get the change in moment. 991 is the typical balance arm length in inches.
Group 2:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
(b)+0.07 (a)757-200
(c)+0.07 (a)757-300
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
26 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 27

Group 2:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
(a) The value is for one changed PSU panel or life vest panel. Multiply by the number of
PSU panels and/or life vest panels changed to get the total Change in Weight. Use one
of the methods that follow (although Method 1 is the recommendation) to find the number
of PSU panels and/or life vest panels:
– Method 1 - Count the PSU panels and/or life vest panels manually.
– Method 2 - Use the total number of seat groups to get an estimate, for example,
triples plus doubles plus singles.
– Method 3 - Use the number of revenue passengers divided by 3 to get an estimate,
for example 200 divided by 3 equals 67 PSU panels and/or life vest panels.
(b) To calculate the Change in Moment, use the total change in weight multiplied by 1011
to get the change in moment. 1011 is the typical balance arm length in inches.
(c) To calculate the Change in Moment, use the total change in weight multiplied by 991
to get the change in moment. 991 is the typical balance arm length in inches.
Group 3:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
(b)+0.12 (a)757-200
(a) The value is for one changed PSU panel or video panel. Multiply by the number of PSU
panels and/or video panels changed to get the total Change in Weight. Use one of the
methods that follow (although Method 1 is the recommendation) to find the number of
PSU panels and/or video panels:
– Method 1 - Count the PSU panels and/or video panels manually.
– Method 2 - Use the total number of seat groups to get an estimate, for example,
triples plus doubles plus singles.
– Method 3 - Use the number of revenue passengers divided by 3 to get an estimate,
for example 200 divided by 3 equals 67 PSU panels.
(b) To calculate the Change in Moment, use the total change in weight multiplied by 1011
to get the change in moment. 1011 is the typical balance arm length in inches.
Group 4, 6:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
(b)+0.11 (a)757-200/200CB
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
27 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 28

Group 4, 6:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
(a) The value is for one changed PSU panel. Multiply by the number of PSU panels to get
the total Change in Weight. Use one of the methods that follow (although Method 1 is
the recommendation) to find the number of PSU panels:
– Method 1 - Count the PSU panels manually.
– Method 2 - Use the total number of seat groups to get an estimate, for example,
triples plus doubles plus singles.
– Method 3 - Use the number of revenue passengers divided by 3 to get an estimate,
for example 200 divided by 3 equals 67 PSU panels.
(b) To calculate the Change in Moment, use the total change in weight multiplied by 1011
to get the change in moment. 1011 is the typical balance arm length in inches.
Group 5, 7:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
(b)+0.07 (a)757-200
(a) The value is for one changed PSU panel or life vest panel. Multiply by the number of
PSU panels and/or life vest panels changed to get the total Change in Weight. Use one
of the methods that follow (although Method 1 is the recommendation) to find the number
of PSU panels and/or life vest panels:
– Method 1 - Count the PSU panels and/or life vest panels manually.
– Method 2 - Use the total number of seat groups to get an estimate, for example,
triples plus doubles plus singles.
– Method 3 - Use the number of revenue passengers divided by 3 to get an estimate,
for example 200 divided by 3 equals 67 PSU panels and/or life vest panels.
(b) To calculate the Change in Moment, use the total change in weight multiplied by 1011
to get the change in moment. 1011 is the typical balance arm length in inches.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR 54530-336R
b. Boeing Service Bulletin 757-25-0284, 757-25-0285, 757-35-0024, 757-35-0030, 757-35-0031
c. Boeing Requirements Bulletin 757-25-0315 RB
d. Boeing Service Related Problem (SRP) 757-SRP-25-0391, 757-SRP-25-0409
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
28 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 29

e. Federal Aviation Administration (FAA) Notice of Proposed Rule Making 2020-01101-T
f. Service Bulletin Index D624N001
g. Standard Overhaul Practices Manual (SOPM) 20-50-01, 20-50-10, 20-50-12
h. 757 Aircraft Maintenance Manual (AMM) 25-23-01
i. 757 Fleet Team Digest (FTD) 25-18001
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
25-23757 Aircraft Maintenance Manual
25-23757 Illustrated Parts Catalog
25-23Component Maintenance Manual
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs or changes in this service bulletin for effects on Fatigue Critical
Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability
information.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
29 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 30

Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
30 of 96
BOEING SERVICE BULLETIN 757-25-0315
BLANK PAGE

### Page 31

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits/parts shown in Paragraph 2.C., Parts Necessary for Each Airplane, and
Paragraph 2.D., Parts Necessary to Change Spares. Operators are encouraged to share schedule
requirements with Boeing for incorporation of the service bulletin. The kits/parts are subject to the terms
and conditions of the Boeing standard purchase order acknowledgment. Prices are in United States
Dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of these methods:
1. Order on-line via ATA Spec 2000 or The Boeing PART Page
2. Fax to (206) 662-7145
Group 1-3, 5, 7:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the Original Issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
Revision 1 date of
this Service Bul-
letin (Calendar
Days)
QTYDateNameKit Number
$196.00213500December 21,
2018
TOP KIT - ULTEM PSU
PANEL MODIFICA-
TION - LANYARD IM-
PROVEMENT
012N8928-122 (a)
500January 15,
2019
500January 29,
2019
500February 12,
2019
100February 26,
2019
(a) This top kit is for the work in Part 1 or Part 5 of Paragraph 3.B., Work Instructions.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
31 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 32

Group 2, 5, 7:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the Original Issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
Revision 1 date of
this Service Bul-
letin (Calendar
Days)
QTYDateNameKit Number
$196.00213136December 20,
2018
TOP KIT - LIFE VEST
PANEL MODIFICA-
TION - LANYARD IM-
PROVEMENT
012N8928-123 (a)
(a) This top kit is for the work in Part 2, Part 6, or Part 9 of Paragraph 3.B., Work Instructions.
Group 3:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the Revision 2
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
Revision 1 date of
this Service Bul-
letin (Calendar
Days)
QTYDateNameKit Number
$620.0021372December 20,
2018
TOP KIT - VIDEO
PANEL MODIFICA-
TION - LANYARD IM-
PROVEMENT
012N8928-125 (a)
(a) This top kit is for the work in Part 3, Part 7, or Part 10 of Paragraph 3.B., Work Instructions.
Group 4, 6:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the Revision 2
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
Revision 1 date of
this Service Bul-
letin (Calendar
Days)
QTYDateNameKit Number
$620.00213350December 21,
2018
TOP KIT - ALUM PSU
PANEL MODIFICA-
TION - LANYARD IM-
PROVEMENT
012N8928-124 (a)
350January 22,
2019
300February 12,
2019
(a) This top kit is for the work in Part 4 or Part 8 of Paragraph 3.B., Work Instructions.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
32 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 33

Operators are encouraged to complete the survey provided in APPENDIX E of this service bulletin to
help Boeing predict the quantity and timing of the Boeing Supplied Kits/Parts.
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
NOTE: One top kit is necessary for each Passenger Service Unit (PSU) panel, life vest panel or
video panel. In addition, the items shown in Paragraph 2.C.2., Parts and Materials Supplied
by the Operator, may be necessary for each PSU panel, life vest panel or video panel.
Group 1-3, 5, 7:
Kit 012N8928
NotesExisting Part
Number
NameQTYNew Part Number
-122
Top Kit - Ultem
PSU Panel Modifi-
cation - Lanyard
Improvement
-012N8928-122
LANYARD ASSY,
STD CLIP, PSU
2417A3003-2
417N3190-1LANYARD ASSY,
SPRING CLIP,
PSU
1417A3003-9
WASHER FLAT2NAS1149C0316R
(a)SCREW2NAS1301-6-5
(a) If grip length shown is not available at Boeing, fasteners supplied in kits
may be one grip length longer than indicated. Also, if any fasteners part
numbers listed are not available or have been superseded, substitute
fasteners may be supplied in kits.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
33 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 34

Group 2, 5, 7:
Kit 012N8928
NotesExisting Part
Number
NameQTYNew Part Number
-123
Top Kit - Life Vest
Panel Modification
- Lanyard Improve-
ment
-012N8928-123
LANYARD ASSY,
STD CLIP, PSU
2417A3003-2
417N3190-1LANYARD ASSY,
SPRING CLIP,
PSU
1417A3003-9
(a)(b)BACS12HN08-6 or
BACS12FA08K6
BOLT3BACS12HN08-8
(b)WASHER FLAT3NAS1149C0316R
(a)(b)SCREW3NAS1301-6-5
(a) If grip length shown is not available at Boeing, fasteners supplied in kits
may be one grip length longer than indicated. Also, if any fasteners part
numbers listed are not available or have been superseded, substitute
fasteners may be supplied in kits.
(b) There are more parts than are necessary.
Group 3:
Kit 012N8928
NotesExisting Part
Number
NameQTYNew Part Number
-125
Top Kit - Video
Panel Modification
- Lanyard Improve-
ment
-012N8928-125
LANYARD ASSY,
STD CLIP, PSU
2417A3003-2
LANYARD ASSY,
SPRING CLIP,
PSU
1417A3003-9
SELF-LOCKING
NUT
2BACN10JC08CD
(a)FAIRING SCREWS2BACS12FA08K7
WASHER FLAT2NAS1149C0316R
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
34 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 35

Group 3:
Kit 012N8928
NotesExisting Part
Number
NameQTYNew Part Number
-125
WASHER, FLAT4NAS1149DN816J
(a)SCREW2NAS1301-6-5
(a) If grip length shown is not available at Boeing, fasteners supplied in kits
may be one grip length longer than indicated. Also, if any fasteners part
numbers listed are not available or have been superseded, substitute
fasteners may be supplied in kits.
Group 4, 6:
Kit 012N8928
NotesExisting Part
Number
NameQTYNew Part Number
-124
Top Kit - Alum PSU
Panel Modification
- Lanyard Improve-
ment
-012N8928-124
LANYARD ASSY,
STD CLIP, PSU
2417A3003-22
LANYARD ASSY,
SPRING CLIP,
PSU
2417A3003-23
BRACKET ASSY2417A3005-4
SELF-LOCKING
NUT
4BACN10JC08CD
(a)FAIRING SCREWS2BACS12FA08K7
(a)FAIRING SCREWS2BACS12FA08K8
(a)FAIRING SCREWS2BACS12FA3K12
WASHER4NAS1149D0316J
WASHER, FLAT8NAS1149DN816J
(a) If grip length shown is not available at Boeing, fasteners supplied in kits
may be one grip length longer than indicated. Also, if any fasteners part
numbers listed are not available or have been superseded, substitute
fasteners may be supplied in kits.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
35 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 36

2. Parts and Materials Supplied by the Operator
The following parts or materials are necessary to do the change in this service bulletin. Parts and
materials in the manuals given in Paragraph 1.J., References, can also be necessary. Examine
operator part and material supply to make sure all necessary parts and materials are available.
Group 1-3, 5, 7:
NotesNameQTYPart Number / Specification
(a)(b)(c)THREAD LOCKING COM-
POUND
1/4 fl.
oz.
222MS (MIL-S-46163A TYPE
11 GRADE M)
(b)(d)WASHER, FLAT2NAS1149DN816J
(a) Can be purchased from: Henkel Loctite Corporation., 15051 E. Don Julian
Road, City of Industry, California 91746, CAGE Code: 12405.
(b) Can be purchased from: Boeing Distribution Incorporated (Cage 22819), 2750
Regent Boulevard, Dallas, Texas 75261. Website: https://shop.boeing.com/avi-
ation-supply
(c) Quantity necessary is for each PSU panel, life vest panel or video panel.
(d) Quantity necessary is for each life vest panel when a new BACS12HN08-8
bolt replaces a BACS12FA08K6 screw. Refer to FIGURE 2.
Group 4, 6:
None.
3. Parts Modified and Reidentified
The parts shown below are changed as shown in this service bulletin. The quantity (QTY) is the
number of parts changed on each airplane.
NotesNew Part Num-
ber
NameQTYExisting Part
Number
(a)(b)(f)(g)417N3011-2000
series,
417N3011-5000
series or
417N3011-6000
series
Passenger Service Unit
Panel Assembly
-417N3011-( )
(a)(d)(f)(g)417N3021-5000
series
Video Panel Assembly-417N3021-( )
(a)(c)(f)(g)417N3070-1000
series or
417N3070-5000
series
Life Vest Panel Assem-
bly
-417N3070-( )
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
36 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 37

NotesNew Part Num-
ber
NameQTYExisting Part
Number
(a)(e)(f)(g)417N3100-5000
series or
417N3100-6000
series
Passenger Service Unit
Panel Assembly
-417N3100-( )
(a)(f)(g)(h)417N3014-1000
series
Life Vest Panel Assem-
bly
-417N3014-( )
(a) Make the change in accordance with this service bulletin.
(b) Refer to APPENDIX A for the new part number of each rigid plastic PSU
panel after the change is done in accordance with this service bulletin.
(c) Refer to APPENDIX B for the new part number of each life vest panel after
the change is done in accordance with this service bulletin.
(d) Refer to APPENDIX C for the new part number of each video panel after the
change is done in accordance with this service bulletin.
(e) Refer to APPENDIX D for the new part number of each aluminum PSU panel
after the change is done in accordance with this service bulletin.
(f) You cannot use the existing part to replace the new or changed part.
(g) Identify on the part that the change done in accordance with this service bulletin
was made. Refer to SOPM 20-50-10 as an accepted procedure.
(h) Refer to APPENDIX F for the new part number of each life vest panel after
the change is done in accordance with this service bulletin.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
To get the parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
NotesNameQTYPart Number
(a)(b)(c)LANYARD ASSY, STD CLIP,
PSU
2417A3003-2
(a)(b)(c)LANYARD ASSY, SPRING
CLIP, PSU
1417A3003-9
(d)BRACKET ASSY2417A3005-4
(a)(b)(c)SCREW2NAS1301-6-5
(b)BOLT2BACS12HN08-8
(d)WASHER4NAS1149D0316J
(a)(b)(e)WASHER2NAS1149C0316R
(b)(e)WASHER, FLAT2NAS1149DN816J
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
37 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 38

NotesNameQTYPart Number
(c)WASHER, FLAT4NAS1149DN816J
(d)WASHER, FLAT8NAS1149DN816J
(c)SELF-LOCKING NUT2BACN10JC08CD
(d)SELF-LOCKING NUT4BACN10JC08CD
(c)(d)FAIRING SCREWS2BACS12FA08K7
(d)FAIRING SCREWS2BACS12FA08K8
(d)FAIRING SCREWS2BACS12FA3K12
(d)LANYARD ASSY, STD CLIP,
PSU
2417A3003-22
(d)LANYARD ASSY, SPRING
CLIP, PSU
2417A3003-23
(a) Necessary for each rigid plastic PSU panel for the work in Part 5 of Paragraph 3.B.,
Work Instructions.
(b) Necessary for each life vest panel for the work in Part 6 of Paragraph 3.B., Work Instruc-
tions.
(c) Necessary for each video panel for the work in Part 7 of Paragraph 3.B., Work Instruc-
tions.
(d) Necessary for each aluminum PSU panel for the work in Part 8 of Paragraph 3.B., Work
Instructions.
(e) Quantity necessary is for each life vest panel when a new BACS12HN08-8 bolt replaces
a BACS12FA08K6 screw. Refer to FIGURE 2.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
38 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 39

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF
METAL PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE
BUNDLES CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES
CAN CAUSE SPARKS OR OTHER ELECTRICAL DAMAGE.
CAUTION
NOTE: RC: Start
1. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. For the related SB, some locations are marked RC Start and RC
End to identify the requirements that are restated from the RB. For the related SB,
the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD.
Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations
to steps between RC Start and RC End, including substeps and identified figures.
For the related SB, the steps not between RC Start and RC End may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC; this is provided that the
steps between RC Start and RC End, including sub-steps and identified figures, can
still be done as specified, and the airplane can be put back in an airworthy condition.
Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
39 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 40

— Values for airframe maintenance tasks are included in Chapter 20 of 757
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
6. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate
full threaded fasteners (screws) needed for installation in this service bulletin.
7. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
8. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
RC: End
9. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
10. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
11. Obey all of the warnings and cautions given in the specified manual sections.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
40 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 41

B. WORK INSTRUCTIONS
RC: Start
Actions Required for Compliance
1. Requirements:
Group 1, Configuration 1:
Table 1: Passenger Service Unit Panel, Lanyard Assemblies - Installation
Refer to the listed procedures in
SB 757-25-0315 Original Issue or
later approved revisions as an
accepted procedure
Method of ComplianceActionCondition
PART 1: Passenger Service Unit
Panel, Lanyard Assemblies - Instal-
lation - Airplane Work
-Install additional nylon coated
stainless steel lanyards on
each Passenger Service Unit
(PSU) panel, such that in the
event of a survivable accident,
any detached PSU panel does
not extend lower than Body
Water Line (BWL) 265.7.
All Airplanes
Group 2, 5, Configuration 1; Group 7:
Table 2: Passenger Service Unit Panel and Life Vest Panel, Lanyard Assemblies - Installation
Refer to the listed procedures in
SB 757-25-0315 Original Issue or
later approved revisions as an
accepted procedure
Method of ComplianceActionCondition
PART 2: Passenger Service Unit
Panel and Life Vest Panel, Lanyard
Assemblies - Installation - Airplane
Work
-Install additional nylon coated
stainless steel lanyards on
each PSU panel and life vest
panel, such that in the event
of a survivable accident, any
detached PSU panel and any
detached life vest panel do not
extend lower than Body Water
Line (BWL) 265.7.
All Airplanes
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
41 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 42

Group 3, Configuration 1:
Table 3: Passenger Service Unit Panel and Video Panel, Lanyard Assemblies - Installation
Refer to the listed procedures in
SB 757-25-0315 Original Issue or
later approved revisions as an
accepted procedure
Method of ComplianceActionCondition
PART 3: Passenger Service Unit
Panel and Video Panel, Lanyard
Assemblies - Installation - Airplane
Work
-Install additional nylon coated
stainless steel lanyards on
each PSU panel and video
panel, such that in the event
of a survivable accident, any
detached PSU panel and any
detached video panel do not
extend lower than Body Water
Line (BWL) 265.7.
All Airplanes
Group 4, Configuration 1-2; Group 6:
Table 4: Passenger Service Unit Panel, Lanyard Assemblies - Installation
Refer to the listed procedures in
SB 757-25-0315 Original Issue or
later approved revisions as an
accepted procedure
Method of ComplianceActionCondition
PART 4: Passenger Service Unit
Panel, Lanyard Assemblies - Instal-
lation - Airplane Work
-Install additional nylon coated
stainless steel lanyards on
each PSU panel, such that in
the event of a survivable acci-
dent, any detached PSU panel
does not extend lower than
Body Water Line (BWL) 265.7.
All Airplanes
Group 2, 5, Configuration 2:
Table 5: Life Vest Panel, Lanyard Assemblies - Installation
Refer to the listed procedures in
SB 757-25-0315 Original Issue or
later approved revisions as an
accepted procedure
Method of ComplianceActionCondition
PART 9: Life Vest Panel, Lanyard
Assemblies - Installation - Airplane
Work
-Install additional nylon coated
stainless steel lanyards on
each life vest panel, such that
in the event of a survivable
accident, any detached life
vest panel does not extend
lower than Body Water Line
(BWL) 265.7.
All Airplanes
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
42 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 43

Group 3, Configuration 2:
Table 6: Video Panel, Lanyard Assemblies - Installation
Refer to the listed procedures in
SB 757-25-0315 Original Issue or
later approved revisions as an
accepted procedure
Method of ComplianceActionCondition
PART 10: Video Panel, Lanyard
Assemblies - Installation - Airplane
Work
-Install additional nylon coated
stainless steel lanyards on
each video panel, such that in
the event of a survivable acci-
dent, any detached video
panel does not extend lower
than Body Water Line (BWL)
265.7.
All Airplanes
Group 1, Configuration 2-3; Group 2-4, Configuration 3; Group 4, Configuration 4; Group
5, Configuration 3:
No further action required provided the airplane configuration remains unchanged.
RC: End
Procedures:
1. Group 1, Configuration 1:
PART 1: PASSENGER SERVICE UNIT PANEL, LANYARD ASSEMBLIES - INSTALLATION -
AIRPLANE WORK
a. At each PSU panel location:
(1) Lower the PSU panel. Do not disconnect hose and electrical connections. Refer to 757
AMM 25-23-01 as an accepted procedure.
(2) Install additional lanyard assemblies on the PSU panel. Refer to FIGURE 1 as an accepted
procedure.
(3) Close the PSU panel. Refer to 757 AMM 25-23-01 as an accepted procedure.
b. Put the airplane back to a serviceable condition.
2. Group 2, 5, Configuration 1; Group 7:
PART 2: PASSENGER SERVICE UNIT PANEL AND LIFE VEST PANEL, LANYARD ASSEMBLIES
- INSTALLATION - AIRPLANE WORK
a. At each PSU panel location:
(1) Lower the PSU panel. Do not disconnect hose and electrical connections. Refer to 757
AMM 25-23-01 as an accepted procedure.
(2) Install additional lanyard assemblies on the PSU panel. Refer to FIGURE 1 as an accepted
procedure.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
43 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 44

(3) Close the PSU panel. Refer to 757 AMM 25-23-01 as an accepted procedure.
b. At each life vest panel location:
(1) Lower the life vest panel. Refer to 757 AMM 25-23-01 as an accepted procedure.
(2) Install additional lanyard assemblies on the life vest panel. Refer to FIGURE 2 as an
accepted procedure.
(3) Close the life vest panel. Refer to 757 AMM 25-23-01 as an accepted procedure.
c. Put the airplane back to a serviceable condition.
3. Group 3, Configuration 1:
PART 3: PASSENGER SERVICE UNIT PANEL AND VIDEO PANEL, LANYARD ASSEMBLIES
- INSTALLATION - AIRPLANE WORK
a. At each PSU panel location:
(1) Lower the PSU panel. Do not disconnect hose and electrical connections. Refer to 757
AMM 25-23-01 as an accepted procedure.
(2) Install lanyard assemblies to the PSU panel. Refer to FIGURE 1 as an accepted procedure.
(3) Close the PSU panel. Refer to 757 AMM 25-23-01 as an accepted procedure.
b. At each video panel location:
(1) Lower the video panel. Do not disconnect electrical connections. Refer to 757 AMM
25-23-01 as an accepted procedure.
(2) Install lanyard assemblies to the video panel. Refer to FIGURE 3 as an accepted
procedure.
(3) Close the video panel. Refer to 757 AMM 25-23-01 as an accepted procedure.
c. Put the airplane back to a serviceable condition.
4. Group 4, Configuration 1-2; Group 6:
PART 4: PASSENGER SERVICE UNIT PANEL, LANYARD ASSEMBLIES - INSTALLATION -
AIRPLANE WORK
a. At each PSU panel location:
(1) Lower the PSU panel. Do not disconnect hose and electrical connections. Refer to 757
AMM 25-23-01 as an accepted procedure.
(2) Install additional lanyard assemblies on the PSU panel. Refer to FIGURE 4 as an accepted
procedure.
(3) Close the PSU panel. Refer to 757 AMM 25-23-01 as an accepted procedure.
b. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
44 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 45

5. PART 5: PASSENGER SERVICE UNIT PANEL, LANYARD ASSEMBLIES - INSTALLATION -
COMPONENT WORK: 417N3011-( )
a. Install additional lanyard assemblies on the PSU panel. Refer to FIGURE 1 as an accepted
procedure.
6. PART 6: LIFE VEST PANEL, LANYARD ASSEMBLIES - INSTALLATION - COMPONENT WORK:
417N3070-( ), 417N3014-( )
a. Install additional lanyard assemblies on the life vest panel. Refer to FIGURE 2 as an accepted
procedure.
7. PART 7: VIDEO PANEL, LANYARD ASSEMBLIES - INSTALLATION - COMPONENT WORK:
417N3021-( )
a. Install additional lanyard assemblies on the video panel. Refer to FIGURE 3 as an accepted
procedure.
8. PART 8: PASSENGER SERVICE UNIT PANEL, LANYARD ASSEMBLIES - INSTALLATION -
COMPONENT WORK: 417N3100-( )
a. Install additional lanyard assemblies on the PSU panel. Refer to FIGURE 4 as an accepted
procedure.
9. Group 2, 5, Configuration 2:
PART 9: LIFE VEST PANEL, LANYARD ASSEMBLIES - INSTALLATION - AIRPLANE WORK
a. At each life vest panel location:
(1) Lower the life vest panel. Refer to 757 AMM 25-23-01 as an accepted procedure.
(2) Install additional lanyard assemblies on the life vest panel. Refer to FIGURE 2 as an
accepted procedure.
(3) Close the life vest panel. Refer to 757 AMM 25-23-01 as an accepted procedure.
b. Put the airplane back to a serviceable condition.
10. Group 3, Configuration 2:
PART 10: VIDEO PANEL, LANYARD ASSEMBLIES - INSTALLATION - AIRPLANE WORK
a. At each video panel location:
(1) Lower the video panel. Refer to 757 AMM 25-23-01 as an accepted procedure.
(2) Install additional lanyard assemblies on the video panel. Refer to FIGURE 3 as an accepted
procedure.
(3) Close the video panel. Refer to 757 AMM 25-23-01 as an accepted procedure.
b. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2: March 17, 2021
45 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 46 (OCR)

BOEING SERVICE BULLETIN 757-25-0315
This Figure applies only to: Group 1-3, 5, 7.
PASSENGER SERVICE UNIT (PSU)  PSU RAIL
(TYPICAL)
(PSU PANEL LOWERED)
TORSION
SPRING
PSU PANEL  2840107
FIGURE 1: PASSENGER SERVICE UNIT PANEL, LANYARD ASSEMBLIES - INSTALLATION
(SHEET 1 OF 5)
Original Issue: February 22, 2019
Revision 2 March 17, 2021  Export Controlled ECCN: 9E991  Copyright © Unpublished  757-25-0315
Work - See page 1 for details.  46 of 96

### Page 47 (OCR)

BOEING SERVICE BULLETIN 757-25-0315
2840108
FIGURE 1: PASSENGER SERVICE UNIT PANEL, LANYARD ASSEMBLIES - INSTALLATION
(SHEET 2 OF 5)
Original Issue: February 22, 2019
Revision 2 March 17, 2021  Export Controlled ECCN: 9E991  Copyright © Unpublished  757-25-0315
Work - See page 1 for details.  47 of 96

### Page 48 (OCR)

BOEING SERVICE BULLETIN 757-25-0315
PLUNGER
PLUNGER
2840110
FIGURE 1: PASSENGER SERVICE UNIT PANEL, LANYARD ASSEMBLIES - INSTALLATION
(SHEET 3 OF 5)
Original Issue: February 22, 2019
Revision 2 March 17, 2021  Export Controlled ECCN: 9E991  9180-97-292
Copyright © Unpublished
Work - See page 1 for details.  48 of 96

### Page 49

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each Passenger Service Unit (PSU) panel, part
number 417N3011-( ).
NOTE: Get the parts from top kit 012N8928-122 to do the work in this Figure.
More DataQtyIdentificationNameTaskStep
(a)1417N3190-1LANYARD ASSEMBLYRemove1
2-SCREWRemove / Keep2
2-WASHERRemove / Keep
1417A3003-9LANYARD ASSY,
SPRING CLIP, PSU
Install (New)3
2-WASHERInstall (Kept)
2-SCREWInstall (Kept)
2-SCREWRemove / Keep4
2-WASHERRemove / Keep
2417A3003-2LANYARD ASSY, STD
CLIP, PSU
Install (New)5
2-WASHERInstall (Kept)
2-SCREWInstall (Kept)
(c)-417A3003-2LANYARD ASSY, STD
CLIP, PSU
Attach6
(d)-222MS (MIL-S-46163A
TYPE 11 GRADE M)
THREAD LOCKING
COMPOUND
Apply
2NAS1149C0316RWASHER FLATInstall (New)
(e)2NAS1301-6-5SCREWInstall (New)
(f)-417N3011-( )PASSENGER SER-
VICE UNIT PANEL AS-
SEMBLY
Identify7
(b)-417A3003-9LANYARD ASSY,
SPRING CLIP, PSU
Attach8
(a) Support the PSU panel during the disconnection and removal of the lanyard assembly to prevent damage
to the clamp assemblies on the outboard edge of the PSU panel.
(b) Attach the torsion spring in the nearest larger hole in the PSU rail. During attachment make sure the torsion
spring is compressed to get the hooks fully into the larger hole of the PSU rail. Release compression and
pull down on the lanyard. If the hooks of the torsion spring are not fully engaged, the torsion spring could
come out of the hole and the PSU panel could become detached from the PSU rail. The torsion spring
will rotate freely in the hole of the PSU rail as the PSU panel is closed, but this does not affect retention.
FIGURE 1: PASSENGER SERVICE UNIT PANEL, LANYARD ASSEMBLIES - INSTALLATION
(SHEET 4 OF 5)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2 March 17, 2021
49 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 50

More DataQtyIdentificationNameTaskStep
(c) The plunger (a protruding threaded insert with a hole that faces inboard) on the clamp assemblies must
go through spring clip portion of the lanyard assembly with the 0.25 inch diameter hole.
(d) Refer to SOPM 20-50-12 as an accepted procedure.
(e) Finger tighten only.
(f) Identify the PSU panel assembly, related to its existing part number, on a non-decorative surface with
the new part number listed in APPENDIX A. A white pen or sticker can be used for better contrast with a
dark background. Refer to SOPM 20-50-10 as an accepted procedure.
FIGURE 1: PASSENGER SERVICE UNIT PANEL, LANYARD ASSEMBLIES - INSTALLATION
(SHEET 5 OF 5)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2 March 17, 2021
50 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 51 (OCR)

BOEING SERVICE BULLETIN 757-25-0315
_ This Figure applies only to: Group 2, 5, 7.
gage
VD
PSU RAIL
PASSENGER SERVICE UNIT
(TYPICAL)
(LIFE VEST PANEL LOWERED)
TORSION (13
SPRING
FASTEN STRAPS SECURELY  OVER LIFEVESTS
LIFE VEST PANEL  2840111
FIGURE 2: LIFE VEST PANEL, LANYARD ASSEMBLIES - INSTALLATION
(SHEET 1 OF 6)
Original Issue: February 22, 2019
Revision 2 March 17, 2021  Export Controlled ECCN: 9E991  Copyright © Unpublished  757-25-0315
Work - See page 1 for details.  51 of 96

### Page 52 (OCR)

BOEING SERVICE BULLETIN 757-25-0315
2840112
FIGURE 2: LIFE VEST PANEL, LANYARD ASSEMBLIES - INSTALLATION
(SHEET 2 OF 6)
Original Issue: February 22, 2019
Revision 2 March 17, 2021  Export Controlled ECCN: 9E991  Copyright © Unpublished  757-25-0315
Work - See page 1 for details.  52 of 96

### Page 53 (OCR)

BOEING SERVICE BULLETIN 757-25-0315
PLUNGER
PLUNGER
10
2840113
FIGURE 2: LIFE VEST PANEL, LANYARD ASSEMBLIES - INSTALLATION
(SHEET 3 OF 6)
Original Issue: February 22, 2019
Revision 2 March 17, 2021  Export Controlled ECCN: 9E991  757-25-0315
Copyright © Unpublished
Work - See page 1 for details.  53 of 96

### Page 54

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each life vest panel, part number 417N3070-( ) or
417N3014-( ).
NOTE: Get the parts from Top kit 012N8928-123 to do the work in this Figure.
More DataQtyIdentificationNameTaskStep
(a)1417N3190-1LANYARD ASSEMBLYRemove1
1-SCREWRemove2
If installed.1-WASHERRemove / Keep
Disconnect only at
the end specified.
1417N3190-17LIFE VEST DOOR
LANYARD
Disconnect
1-SCREWRemove / Keep3
If installed.1-WASHERRemove / Keep
(b)1417A3003-9LANYARD ASSY,
SPRING CLIP, PSU
Install (New)4
Put the free end
back in position. (c)
1417N3190-17LIFE VEST DOOR
LANYARD
Connect
If removed.1-WASHERInstall (Kept)
If a washer was not
removed.
1NAS1149DN816JWASHERInstall (New)
1BACS12HN08-8BOLTInstall (New)
1-SCREWInstall (Kept)5
1-WASHERInstall (Kept)
1-SCREWRemove / Keep6
If installed.1-WASHERRemove / Keep
1417A3003-2LANYARD ASSY, STD
CLIP, PSU
Install (New)7
If removed.1-WASHERInstall (Kept)
1-SCREWInstall (Kept)
(e)-417A3003-2LANYARD ASSY, STD
CLIP, PSU
Attach8
(f)-222MS (MIL-S-46163A
TYPE 11 GRADE M)
THREAD LOCKING
COMPOUND
Apply
1NAS1149C0316RWASHER FLATInstall (New)
(g)1NAS1301-6-5SCREWInstall (New)
FIGURE 2: LIFE VEST PANEL, LANYARD ASSEMBLIES - INSTALLATION
(SHEET 4 OF 6)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2 March 17, 2021
54 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 55

More DataQtyIdentificationNameTaskStep
1-SCREWRemove9
If installed.1-WASHERRemove / Keep
Disconnect only at
the end specified.
1417N3190-17LIFE VEST DOOR
LANYARD
Disconnect
1417A3003-2LANYARD ASSY, STD
CLIP, PSU
Install (New)10
Put the free end
back in position. (c)
1417N3190-17LIFE VEST DOOR
LANYARD
Connect
If removed.1-WASHERInstall (Kept)
If a washer was not
removed.
1NAS1149DN816JWASHERInstall (New)
1BACS12HN08-8BOLTInstall (New)
(e)-417A3003-2LANYARD ASSY, STD
CLIP, PSU
Attach11
(f)-222MS (MIL-S-46163A
TYPE 11 GRADE M)
THREAD LOCKING
COMPOUND
Apply
1NAS1149C0316RWASHER FLATInstall (New)
(g)1NAS1301-6-5SCREWInstall (New)
(h)1417N3070-( ) OR
417N3014-( )
LIFE VEST PANEL
ASSEMBLY
Identify12
(d)-417A3003-9LANYARD ASSY,
SPRING CLIP, PSU
Attach13
(a) Support the life vest panel during the disconnection and removal of the lanyard assembly to prevent
damage to the clamp assemblies on the outboard edge of the life vest panel.
(b) Install the spring clip portion of one side of the lanyard assembly.
(c) The terminal end of 417N3190-17 can be moved to permit the installation of 417A3003-2.
(d) Attach the torsion spring in the nearest larger hole in the PSU rail. During attachment make sure the torsion
spring is compressed to get the hooks fully into the larger hole of the PSU rail. Release compression and
pull down on the lanyard. If the hooks of the torsion spring are not fully engaged, the torsion spring could
come out of the hole and the life vest panel could become detached from the PSU rail. The torsion spring
will rotate freely in the hole of the PSU rail as the life vest panel is closed, but this does not affect retention.
(e) The plunger (a protruding threaded insert with a hole that faces inboard) on the clamp assemblies must
go through spring clip portion of the lanyard assembly with the 0.25 inch diameter hole.
(f) Refer to SOPM 20-50-12 as an accepted procedure.
(g) Finger tighten only.
FIGURE 2: LIFE VEST PANEL, LANYARD ASSEMBLIES - INSTALLATION
(SHEET 5 OF 6)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2 March 17, 2021
55 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 56

More DataQtyIdentificationNameTaskStep
(h) Confirm existing part number of the life vest panel assembly. Identify the life vest panel assembly, related
to its existing part number, on a non-decorative surface, with the new part number listed in APPENDIX
B or APPENDIX F. A white pen or sticker can be used for better contrast with a dark background. Refer
to SOPM 20-50-10 as an accepted procedure.
FIGURE 2: LIFE VEST PANEL, LANYARD ASSEMBLIES - INSTALLATION
(SHEET 6 OF 6)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: February 22, 2019
757-25-0315Revision 2 March 17, 2021
56 of 96
BOEING SERVICE BULLETIN 757-25-0315

### Page 57 (OCR)

BOEING SERVICE BULLETIN 757-25-0315
This Figure applies only to: Group 3.
PSU RAIL
FWD  TORION O
PASSENGER SERVICE UNIT
(TYPICAL)
VIDEO PANEL LOWERED)
VIDEO PANEL  2840350
FIGURE 3: VIDEO PANEL, LANYARD ASSEMBLIES - INSTALLATION
(SHEET 1 OF 6)
Original Issue: February 22, 2019
Revision 2 March 17, 2021  Export Controlled ECCN: 9E991  757-25-0315
Copyright © Unpublished
Work - See page 1 for details.  57 of 96

### Page 58 (OCR)

BOEING SERVICE BULLETIN 757-25-0315
2840369
FIGURE 3: VIDEO PANEL, LANYARD ASSEMBLIES - INSTALLATION
(SHEET 2 OF 6)
Original Issue: February 22, 2019
Revision 2 March 17, 2021  Export Controlled ECCN: 9E991  757-25-0315
Copyright © Unpublished
Work - See page 1 for details.  58 of 96

### Page 59 (OCR)

BOEING SERVICE BULLETIN 757-25-0315
HINGE CLAMP (SHOWN ATTACHED
DETACHED FROM VIDEO PANEL)  TO AIR CONDITIONING RAIL BUT  PLUNGER
AIR CONDITIONING RAIL
34
VIDEO PANEL
CORNER, HINGED SIDE
(HINGE CLAMP NOT SHOWN)
2840533
FIGURE 3: VIDEO PANEL, LANYARD ASSEMBLIES - INSTALLATION
(SHEET 3 OF 6)
Original Issue: February 22, 2019
Revision 2 March 17, 2021  Export Controlled ECCN: 9E991  757-25-0315
Copyright © Unpublished
Work - See page 1 for details.  59 of 96

### Page 60 (OCR)

BOEING SERVICE BULLETIN 757-25-0315
HINGE CLAMP (SHOWN ATTACHED
TO AIR CONDITIONING RAIL BUT
DETACHED FROM VIDEO PANEL)  PLUNGER
AIR CONDITIONING RAIL
VIDEO PANEL
CORNER, HINGED SIDE
(HINGE CLAMP NOT SHOWN)
2840556
FIGURE 3: VIDEO PANEL, LANYARD ASSEMBLIES - INSTALLATION
(SHEET 4 OF 6)
Original Issue: February 22, 2019
Revision 2 March 17, 2021  Export Controlled ECCN: 9E991  757-25-0315
Copyright © Unpublished
Work - See page 1 for details.  60 of 96

The text continues at https://openairdocs.org/service-documents/boeing/757-25-0315-rb/file/b0b0aefb158f.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
