# Boeing Alert Requirements Bulletin 757-26A0062 RB: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0474; AD 2025-23-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Requirements Bulletin 757-26A0062 RB](https://openairdocs.org/service-documents/boeing/757-26a0062-rb.md)
- Title as filed: 757-26A0062_RB-00
- Pages: 20
- PDF: https://openairdocs.org/files/sha256/d1/97/d197e1bafc6a1cc2997f3b2829dbc6c5810e3e1ad281d936512904352f26e5e8
- Page: https://openairdocs.org/service-documents/boeing/757-26a0062-rb/file/d197e1bafc6a

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
757
Requirements Bulletin
ALERT
Number: 757-26A0062 RB
Original Issue: January 17, 2025
ATA System: 2612
SUBJECT: FIRE PROTECTION - Engine Strut Overheat Detection - Strut Structure Inspection,
Thermal Switches Functional Test and Precooler Replacement
EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations
(EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for
export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per
Supp.1 to Part 740 of the EAR.
9E991ECCN:
Copyright © 2025 The Boeing Company
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: January 17, 2025
757-26A0062 RB
1 of 20
3.0

### Page 2

Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
2 of 20
REQUIREMENTS BULLETIN 757-26A0062
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
1. EFFECTIVITY ................................................ 5
A. Airplanes ................................................ 5
B. Spares Affected ............................................ 7
2. CONCURRENT REQUIREMENTS ..................................... 7
3. COMPLIANCE ................................................ 7
4. APPROVAL ................................................. 9
5. ACCOMPLISHMENT INSTRUCTIONS .................................. 1 1
A. General Information ......................................... 1 1
B. Work Instructions ........................................... 1 3
FIGURE 1: LEFT AND RIGHT ENGINE NACELLE - LEFT AND RIGHT ENGINE STRUT STRUCTURE -
INSPECTION .......................................... 1 6
FIGURE 2: LEFT AND RIGHT ENGINE NACELLE - PRECOOLER - REPLACEMENT [Group 2] . . . 18
APPENDIX A: THERMAL SWITCH TEMPERATURE LIMITS ........................ 2 0
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
3 of 20
REQUIREMENTS BULLETIN 757-26A0062
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
4 of 20
REQUIREMENTS BULLETIN 757-26A0062
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
757
Requirements Bulletin
ALERT
Number: 757-26A0062 RB
Original Issue: January 17, 2025
ATA System: 2612
SUBJECT: FIRE PROTECTION - Engine Strut Overheat Detection - Strut Structure Inspection,
Thermal Switches Functional Test and Precooler Replacement
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING
PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN
(RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL
TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB
WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
1. Effectivity
A. Airplanes
This bulletin is applicable to 757-200, 757-200CB, 757-200PF, 757-300 Airplane(s), line number(s)
2-36, 38, 40, 42, 50-52, 54, 56-58, 63, 74-81, 89-90, 93-94, 96-100, 102, 114-117, 123, 125, 127,
130, 132, 142, 144-146, 148, 150-153, 155-156, 160-163, 165-170, 172-175, 178-180, 182-183,
185, 187, 200, 203-204, 208-215, 218-221, 224-228, 232-234, 236-237, 240, 242-245, 248-250,
252-253, 255-260, 262, 268-269, 271-273, 276, 278-283, 288-289, 292, 296-297, 302-304, 308-309,
314-317, 321, 323-325, 327-328, 332-333, 336-337, 340, 344-345, 350-351, 356-360, 362-365,
368, 370-371, 374-375, 378-379, 383-384, 387-392, 397-398, 400, 402, 404, 409-410, 412,
417-418, 423, 425, 432-433, 436, 440-441, 445, 449-453, 457, 459-461, 463, 466, 468, 470-476,
478, 480, 482-484, 486, 491, 495, 503-504, 507, 509, 511, 514, 517, 519-520, 522-523, 525-526,
528-530, 534, 536, 538, 540, 544-549, 551-555, 557, 561-562, 564-566, 568, 572, 574-575, 578,
580, 582-586, 589, 593, 595-596, 598, 600-625, 627-638, 640-666, 668-683, 685-687, 690-692,
694, 698, 702, 704, 706-708, 712, 717, 720, 722-723, 725-726, 728-730, 733-735, 737-738,
745-749, 751-753, 755-756, 759, 761-763, 765-769, 771, 774, 776, 778-782, 784, 786, 788,
790-791, 793, 795-799, 802, 804-806, 809-818, 822-823, 827-828, 830, 833-834, 837, 839-840,
842-843, 846-853, 855-856, 858-868, 870-873, 877, 879, 881-882, 888-889, 894-895, 897, 899-900,
902-903, 905-906, 909, 911-913, 915-916, 918-920, 922-926, 928-933, 935-936, 938, 940, 943,
945-948, 950-952, 956, 958, 960-967, 969-970, 972-974, 976-981, 983-986, 988-1000, 1002-1005,
1007-1009, 1012, 1015, 1017-1018, 1026, 1028-1029, 1031-1032, 1038-1043, 1047-1048 in 2
Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane
applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through
9 inclusive.
The Variable Numbers and Group Information for the applicable airplanes is given below.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
5 of 20

### Page 6

DESCRIPTIONCONFIGURATIONGROUP
757-200, 757-200CB, 757-200PF airplanes that have RB211-535
engines installed.
-1
757-300 airplanes that have RB211-535 engines installed.-2
Airplane Models:
757-200, 757-200CB, 757-200PF, 757-300
GroupVariable Number
1NA002 - NA028
1NA191 - NA199
1NA201 - NA239
1NA301 - NA305
1NA341 - NA352
1NA391 - NA399
1NA401 - NA408
1NA441 - NA447
1NB021 - NB023
1NB036 - NB041
1NB051 - NB053
1NB061 - NB073
1NB079
1NB131 - NB148
1NB161 - NB162
1NB201 - NB204
1NB221 - NB228
1NB230
1NB236
1NB239
1NB261 - NB267
1NB291 - NB299
1NB301 - NB302
1NB311 - NB312
GroupVariable Number
1NB321 - NB331
1NB421 - NB438
1NB446
1NB451 - NB454
1NB501 - NB523
1NB561
1NB571
1NB581 - NB583
1NC058 - NC062
1NC936 - NC950
1NC971 - NC974
1ND001 - ND007
1ND011 - ND059
1ND111 - ND113
1ND161 - ND199
1ND201 - ND203
1ND221 - ND225
1ND241 - ND248
1ND301 - ND322
1ND401
1ND891
1ND895
1NJ001 - NJ004
1NJ031 - NJ032
GroupVariable Number
2NL001 - NL002
2NL006 - NL017
2NL101 - NL109
2NL141
1NN001 - NN002
1NN051 - NN052
1NS601 - NS616
1NT001 - NT009
1NT201 - NT202
1NT231 - NT234
1NT237 - NT240
1NT242
1NT245 - NT248
1NT281 - NT289
1NT381 - NT386
1NT401 - NT409
1NT411 - NT412
1NT426 - NT427
1NT431 - NT432
1NT436 - NT438
1NT446
1NT731 - NT769
1NT861 - NT862
1NT901 - NT916
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
6 of 20
REQUIREMENTS BULLETIN 757-26A0062
ALERTALERT

### Page 7

GroupVariable Number
1NT971 - NT985
2NU701 - NU705
GroupVariable Number
2NU721 - NU728
2NU731 - NU732
GroupVariable Number
--
--
B. Spares Affected
None.
2. CONCURRENT REQUIREMENTS
None.
3. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
Requirements Bulletin 757-26A0062 RB. The Airworthiness Directive will make the compliance tasks and
times given in Requirements Bulletin 757-26A0062 RB mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Accomplish the required action(s), based on the applicable condition(s) in Table(s) 1, 2 and 3, in accordance
with Accomplishment Instructions.
Table 1: Left and Right Engine Strut Structure General Visual Inspection
Repeat Interval
(Not to Exceed)
Boeing Recom-
mended Compli-
ance Time
ActionCondition
-Within 6 months
after the Original
Issue date of Re-
quirements Bul-
letin 757-
26A0062 RB.
Do a General Visual Inspec-
tion (GVI) for indication of
heat damage on the top
side of the left and right
engine strut structure, up-
per spar web and the inter-
nal strut box structure. (a)
All Airplanes
--No further action is re-
quired.
CONDITION 1:
NO INDICATION OF HEAT
DAMAGE FOUND
-Before further
flight.
Contact the Boeing Compa-
ny for repair instructions
and do the repair.
CONDITION 2:
ANY INDICATION OF
HEAT DAMAGE FOUND
(a) Heat damage indication is defined by discoloration and blistering of the primer and/or
paint on the left and right engine strut structure, upper spar web and the internal strut box
structure in the area of the precooler. Refer to APPENDIX E in service bulletin 757-
26A0062 for heat damage examples.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
7 of 20
REQUIREMENTS BULLETIN 757-26A0062
ALERTALERT

### Page 8

Table 2: Left and Right Engine Strut Thermal Switch Temperature and Continuity Tests
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time
(Whichever Occurs First)
ActionCondition
-Within 27
months after
the Original Is-
sue date of Re-
quirements
Bulletin 757-
26A0062 RB.
Within 9,000
flight hours after
the Original Is-
sue date of Re-
quirements Bul-
letin 757-
26A0062 RB.
Do the thermal switch tem-
perature test and do the
continuity test of the
ground wires.(a)
All Airplanes
8,000 Flight Hours.--Repeat the thermal switch
temperature test and the
continuity test of the
ground wires.(a)
CONDITION 3:
THERMAL SWITCH TEM-
PERATURE TEST WITHIN
LIMITS AND CONTINUITY
TEST PASSED.
-Before further flight.ACTION 1:CONDITION 4:
Replace any failed thermal
switch with a new thermal
switch.
THERMAL SWITCH TEM-
PERATURE TEST NOT
WITHIN LIMITS OR CON-
TINUITY TEST FAILED. -Before further flight.ACTION 2:
Repair or replace any open
circuit wires found to have
failed the continuity test.
-Before further flight.ACTION 3:
Do a System Test-Strut
Overheat Detection Sys-
tem. If the test fails, do ap-
plicable corrective action(s)
and repeat the test until the
test passes.
8,000 Flight Hours.--ACTION 4:
Repeat the thermal switch
temperature test and the
continuity test of the
ground wires.(a)
(a) Thermal switch temperature limits are specified in Appendix A table.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
8 of 20
REQUIREMENTS BULLETIN 757-26A0062
ALERTALERT

### Page 9

Group 2:
Table 3: Precooler Replacement
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Within 9,000
flight hours or 27
months,
whichever oc-
curs first, after
the Original Is-
sue date of Re-
quirements Bul-
letin 757-
26A0062 RB.
Before 45,000
total precooler
Flight Hours.
ACTION 1:
Replace the precooler
with a new or serviceable
precooler. (a)
Airplanes where the pre-
cooler Flight Hours can be
determined.
45,000 total pre-
cooler Flight
Hours.
--ACTION 2:
Repeat replacement of
the precooler with a new
or serviceable precooler.
(a)
-Within 9,000
flight hours or 27
months,
whichever oc-
curs first, after
the Original Is-
sue date of Re-
quirements Bul-
letin 757-
26A0062 RB.
-ACTION 1:
Replace the precooler
with a new or serviceable
precooler. (a)
Airplanes where the pre-
cooler Flight Hours cannot
be determined.
45,000 total pre-
cooler Flight
Hours.
--ACTION 2:
Repeat replacement of
the precooler with a new
or serviceable precooler.
(a)
(a) A serviceable precooler is either a unit with less than 45,000 total precooler flight hours or has less than
45,000 precooler flight hours since the last recore, refer to Honeywell Service Information Letter (SIL)
D202003000632 R01 for additional information.
4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
9 of 20
REQUIREMENTS BULLETIN 757-26A0062
ALERTALERT

### Page 10

If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
10 of 20
REQUIREMENTS BULLETIN 757-26A0062
ALERTALERT

### Page 11

5.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF
METAL PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE
BUNDLES CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES
CAN CAUSE SPARKS OR OTHER ELECTRICAL DAMAGE.
CAUTION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. For the related SB, some locations are marked RC Start and RC
End to identify the requirements that are restated from the RB. For the related SB,
the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD.
Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations
to steps between RC Start and RC End, including substeps and identified figures.
For the related SB, the steps not between RC Start and RC End may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC; this is provided that the
steps between RC Start and RC End, including sub-steps and identified figures, can
still be done as specified, and the airplane can be put back in an airworthy condition.
Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. Boeing Service Letter 757-SL-51-022, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 757 Structural Repair Manual,
Chapter 51.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
11 of 20
REQUIREMENTS BULLETIN 757-26A0062
ALERTALERT

### Page 12

— Values for airframe maintenance tasks are included in Chapter 20 of 757
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 757
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
7. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
8. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance, unless otherwise
specified. A mirror may be necessary to enhance visual access to all exposed surfaces
in the inspection area. This level of inspection is made under normally available
lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may
require removal or opening of access panels or doors. Stands, ladders or platforms
may be required to gain proximity to the area being checked. Basic cleaning may be
required to ensure appropriate visibility.
9. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION,
do all of the ACTION numbers for that CONDITION or OPTION.
10. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures,
and SWPM 20-10-19 for the wire separation requirements, as accepted procedures.
11. A serviceable precooler is either a unit with less than 45,000 total precooler flight
hours or has less than 45,000 precooler flight hours since the last recore, refer to
Honeywell Service Information Letter (SIL) D202003000632 R01 for additional
information.
12. Heat damage indication is defined by discoloration or blistering of the primer or paint
on the left and right engine strut structure, upper spar web and the internal strut box
structure in the area of the precooler. Refer to APPENDIX E in service bulletin
757-26A0062 for heat damage examples.
13. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
12 of 20
REQUIREMENTS BULLETIN 757-26A0062
ALERTALERT

### Page 13

B. WORK INSTRUCTIONS
Action Required for Compliance
1. Requirements:
Table 1: Left and Right Engine Strut Structure General Visual Inspection
Refer to the listed
procedures in SB 757-
26A0062 original is-
sue or later approved
revisions as an ac-
cepted procedure.
Method of
Compliance
ActionCondition
PART 1: Open Access.-Do a General Visual Inspection (GVI) for
indication of heat damage on the top side
of the left and right engine strut structure
upper spar web and the internal strut box
structure. (a)
All Airplanes
-FIGURE 1
Refer to APPENDIX E
for heat damage exam-
ples.
-
PART 6: Close Access.-No further action is required.CONDITION 1:
NO INDICATION OF
HEAT DAMAGE
FOUND
PART 6: Close Access.-Contact the Boeing Company for repair in-
structions and do the repair.
CONDITION 2:
ANY INDICATION OF
HEAT DAMAGE
FOUND
(a) Heat damage indication is defined by discoloration and blistering of the primer and/or paint on the left
and right engine strut structure, upper spar web and the internal strut box structure in the area of the
precooler.
Table 2: Left and Right Engine Strut Thermal Switch Temperature and Continuity Tests
Refer to the listed
procedures in SB 757-
26A0062 original is-
sue or later approved
revisions as an ac-
cepted procedure.
Method of ComplianceActionCondition
PART 1: Open Access.-Do the thermal switch tempera-
ture test and do the continuity
test of the ground wires.(a)
All Airplanes
PART 2: Thermal
switch temperature test
and the continuity test
of the ground wires.
-
-APPENDIX A
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
13 of 20
REQUIREMENTS BULLETIN 757-26A0062
ALERTALERT

### Page 14

Table 2: Left and Right Engine Strut Thermal Switch Temperature and Continuity Tests
Refer to the listed
procedures in SB 757-
26A0062 original is-
sue or later approved
revisions as an ac-
cepted procedure.
Method of ComplianceActionCondition
PART 6: Close Access.-Repeat the thermal switch tem-
perature test and the continuity
test of the ground wires.(a)
CONDITION 3:
THERMAL
SWITCH TEM-
PERATURE
TEST WITHIN
LIMITS AND
CONTINUITY
TEST
PASSED.
PART 1: Open Access.-
PART 2: Thermal
switch temperature test
and the continuity test
of the ground wires.
-
-APPENDIX A
PART 3: Thermal
switch replacement.
-ACTION 1:
Replace any failed thermal
switch with a new thermal
switch.
CONDITION 4:
THERMAL
SWITCH TEM-
PERATURE
TEST NOT
WITHIN LIM-
ITS OR CONTI-
NUITY TEST
FAILED.
PART 4: Repair or Re-
place Wires.
-ACTION 2:
Repair or replace any open cir-
cuit wires found to have failed
the continuity test.
PART 5: Strut Overheat
Detection System Test.
-ACTION 3:
Do a System Test-Strut Over-
heat Detection System.
PART 6: Close Access.-ACTION 4:
Repeat the thermal switch tem-
perature test and the continuity
test of the ground wires.(a)
PART 1: Open Access.-
PART 2: Thermal
switch temperature test
and the continuity test
of the ground wires.
-
-APPENDIX A
(a) Thermal switch temperature limits are specified in Appendix A table.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
14 of 20
REQUIREMENTS BULLETIN 757-26A0062
ALERTALERT

### Page 15

Group 2:
Table 3: Precooler Replacement
Refer to the listed
procedures in SB 757-
26A0062 original is-
sue or later approved
revisions as an ac-
cepted procedure.
Method of
Compliance
ActionCondition
PART 1: Open Access.-ACTION 1:Airplanes where the
precooler Flight Hours
can be determined
Replace the precooler with a new or service-
able precooler. (a) -FIGURE 2
PART 6: Close Access.-
PART 1: Open Access.-ACTION 2:
Repeat replacement of the precooler with
a new or serviceable precooler. (a) -FIGURE 2
PART 6: Close Access.-
PART 1: Open Access.-ACTION 1:Airplanes where the
precooler Flight Hours
cannot be determined
Replace the precooler with a new or service-
able precooler. (a) -FIGURE 2
PART 6: Close Access.-
PART 1: Open Access.-ACTION 2:
Repeat replacement of the precooler with
a new or serviceable precooler. (a) -FIGURE 2
PART 6: Close Access.-
(a) A serviceable precooler is either a unit with less than 45,000 total precooler flight hours or has less than
45,000 precooler flight hours since the last recore, refer to Honeywell Service Information Letter (SIL)
D202003000632 R01 for additional information.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
15 of 20
REQUIREMENTS BULLETIN 757-26A0062
ALERTALERT

### Page 16 (OCR)

REQUIREMENTS BULLETIN 757-26A0062
ALERT  ALERT
STA
209.50
STA
100
LEFT AND RIGHT ENGINE STRUT
3018654
FIGURE 1: LEFT AND RIGHT ENGINE NACELLE - LEFT AND RIGHT ENGINE STRUT STRUCTURE -
INSPECTION
(SHEET 1 OF 2)
Original Issue: January 17, 2025
757-26A0062 RB
Export Controlled ECCN: 9E991
See page 1 for details  16 of 20

### Page 17

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)--LEFT AND RIGHT EN-
GINE STRUT STRUC-
TURE, UPPER SPAR
WEB AND THE INTER-
NAL STRUT BOX
STRUCTURE
Inspect1
(a) Do a General Visual Inspection (GVI) for indication of heat damage on the top side of the left and right
engine strut structure, upper spar web and the internal strut box structure. Heat damage indication is defined
by discoloration and blistering of the primer and/or paint on the left and right engine strut structure, upper
spar web and the internal strut box structure in the area of the precooler. Refer to APPENDIX E in service
bulletin 757-26A0062 for heat damage examples.
FIGURE 1: LEFT AND RIGHT ENGINE NACELLE - LEFT AND RIGHT ENGINE STRUT STRUCTURE -
INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
17 of 20
REQUIREMENTS BULLETIN 757-26A0062
ALERTALERT

### Page 18 (OCR)

REQUIREMENTS BULLETIN 757-26A0062
ALERT  ALERT
This Figure applies only to: Group 2.
STA
209.50 7
LEFT AND RIGHT ENGINE STRUT
FWD  3018676
FIGURE 2: LEFT AND RIGHT ENGINE NACELLE - PRECOOLER - REPLACEMENT
(SHEET 1 OF 2)
Original Issue: January 17, 2025
757-26A0062 RB
Export Controlled ECCN: 9E991
See page 1 for details  18 of 20

### Page 19

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)(b)(c)(d)22341344-2PRECOOLERRemove1
(a)(b)(c)(d)22341344-2PRECOOLERInstall (New)2
(a) Replace the precooler on the left and right engine strut with a serviceable precooler. Refer to 757 AMM
36-11-15 as an accepted procedure.
(b) The quantity of precoolers shown is the total number of precoolers required for the left and right engine
struts. Quantity 1 precooler is required for each engine strut.
(c) Make sure that each precooler is replaced with a serviceable precooler of the same part number.
(d) A serviceable precooler is either a unit with less than 45,000 total precooler flight hours or has less than
45,000 precooler flight hours since the last recore, refer to Honeywell Service Information Letter (SIL)
D202003000632 R01 for additional information.
FIGURE 2: LEFT AND RIGHT ENGINE NACELLE - PRECOOLER - REPLACEMENT
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
19 of 20
REQUIREMENTS BULLETIN 757-26A0062
ALERTALERT

### Page 20

DeadbandOpen TempClose TempHowell Probe
Part Number
Thermal Switch
Part Number
12 degrees F270 +/-23 degrees F300 +/-23 degrees FBH28456 (b)975-0304-003 (a)
(7 degrees C)(132 +/-13 degrees C)(149 +/-13 degrees C)
10 degrees F345 +/-20 degrees F375 +/-20 degrees FBH28457 (b)975-0304-004 (a)
(6 degrees C)(174 +/-11 degrees C)(191 +/-11 degrees C)
10 degrees F320 +/-35 degrees F350 +/-35 degrees FBH28456 (b)975-0304-008 (a)
(6 degrees C)(160 +/-19 degrees C)(177 +/-19 degrees C)
(a) Make sure that each thermal switch is replaced with a new switch or the same switch in the same
position following successful completion of the Thermal Switch Set Temperature Test in this Require-
ments Bulletin.
(b) Use thermocouple switch tester H294 or H394 with the listed Howell Probe Part Number.
APPENDIX A:  THERMAL SWITCH TEMPERATURE LIMITS
(SHEET 1 OF 1)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: January 17, 2025
757-26A0062 RB
20 of 20
REQUIREMENTS BULLETIN 757-26A0062
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
