# Boeing Alert Service Bulletin 757-27A0153: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2013-0369; AD 2014-05-20 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 757-27A0153](https://openairdocs.org/service-documents/boeing/757-27a0153.md)
- Title as filed: U.S. DOT/FAA - SB-757-27A0153-01
- Pages: 5
- PDF: https://openairdocs.org/files/sha256/17/67/17672742d137fe37bc16dc13f1de3ea33528786abfa8f80799fc555da71c95ef
- Page: https://openairdocs.org/service-documents/boeing/757-27a0153/file/17672742d137

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
757
Service Bulletin
ALERT
Number: 757-27A0153
Original Issue: May 09, 2012
Revision 1: October 29, 2012
ATA System: 2721
SUBJECT: FLIGHT CONTROL - Rudder and Rudder Trim Control System - Rudder Pedal Pushrod
Bolt Replacement
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2012 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner™,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and Boeing
liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection
with this document unless provided in writing by Boeing. BOEING is a trademark of Boeing Management
Company.
Original Issue: May 09, 2012
757-27A0153Revision 1: October 29, 2012
1 of 5
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 09, 2012
757-27A0153Revision 1: October 29, 2012
2 of 5
BOEING SERVICE BULLETIN 757-27A0153
ALERTALERT
BLANK PAGE

### Page 3

Commercial 
Airplanes
757
Service Bulletin
ALERT
Short Form RevisionNumber: 757-27A0153Original Issue: May 09, 2012
Revision 1: October 29, 2012
ATA System: 2721
SUBJECT: FLIGHT CONTROL - Rudder and Rudder Trim Control System - Rudder Pedal Pushrod
Bolt Replacement
Revision 1 is sent to change information. Only the changed information is described below. The Original Issue
and Revision 1 are necessary to do the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
No more work is necessary on the airplanes changed in accordance with the original issue of this service bulletin.
However, Boeing would like to make operators aware of some incorrectly specified washer part numbers in an
earlier release of Top Kit 012N8932-21. Washer Part Numbers "NAS1149D0416J", "NAS1149D0432J" and
"NAS1149D0463J" had smaller diameter holes in them than was necessary, and thus it was not possible to
install them. Boeing subsequently replaced them with washer part numbers "NAS1149D0516J", "NAS1149D0532J"
and "NAS1149D0563J" in the later release of Top Kit 012N8932-21. A freeze on the earlier release of the Top
kit was initiated by Boeing to prevent operators receiving the kit. But, if any operator installed incorrect part
number washers, Boeing recommends that they are replaced with correct Washer P/N's in accordance with
Figure 2 of this Service Bulletin Revision at the next convenient maintenance opportunity.
REASON FOR REVISION
This revision is sent to correct some washers that were specified in Top Kit 012N8932-21 and to add instructions
to remove the rudder pedal housing assembly covers to get better access for the detailed inspection in the work
instructions. In addition, information related to the validation of this service bulletin on airplane variable number
NT743 has been added.
The data given in Information Notice 757-27A0153 IN 01 is included in this revision.
REVISION HISTORY
May 09, 2012Original Issue:
October 29, 2012Revision 1:
EFFECTIVITY
All 757-200/200CB/200PF/300 Airplanes. Refer to Paragraph 1.A.1., Airplanes, in the original issue for the list
of affected airplanes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 09, 2012
757-27A0153Revision 1: October 29, 2012
3 of 5

### Page 4

APPROVAL
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this
service bulletin comply with the applicable regulations and are FAA approved, as well as European Aviation
Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in
the service bulletin effectivity. This service bulletin and its approval were based on the airplane in its original
Boeing delivery configuration or as modified by other approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this
service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before
incorporating this service bulletin.
EXISTING INFORMATION
The following is the existing information in the service bulletin:
1. In Summary - Background - Currently there is no validation information which was completed on airplane
variable number NT743.
2. In Paragraph 1.C., Reason - Currently there is no validation information which was completed on
airplane variable number NT743.
3. In paragraph 2.C.1., Kits/Parts - Top Kit 012N8932-21: The table information reads:
Kit 012N8932
NotesExisting Part Num-
ber
NameQTYNew Part Number
-21
(b)WASHER4NAS1149D0416J
(b)WASHER4NAS1149D0432J
(b)WASHER4NAS1149D0463J
(b) There are more parts than are necessary.
4. In Paragraph 3.B., Work Instructions - Currently the work instructions do not specify to remove and
install the captain and the first officer's rudder pedal housing assembly cover for access.
5. In Figure 2, Step 1, the existing washers part numbers are "NAS1149D0416J", "NAS1149D0432J" and
"NAS1149D0463J".
CHANGED INFORMATION
The following is the changed information in the service bulletin:
1. In Summary - Background - A new paragraph is added that reads:
"As a part of a service bulletin validation program, this change was completed on airplane NT743 by
Service Bulletin 757-27A0153 Original Issue. The change completed on airplane NT743 by Service
Bulletin 757-27A0153 Original Issue is equivalent to the release of Revision 1 of this service bulletin.
Airplane NT743 has the configuration of a Group 1 airplane".
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 09, 2012
757-27A0153Revision 1: October 29, 2012
4 of 5
BOEING SERVICE BULLETIN 757-27A0153
ALERTALERT

### Page 5

2. In Paragraph 1.C., Reason - A new paragraph is added that reads:
"As a part of a service bulletin validation program, this change was completed on airplane NT743 by
Service Bulletin 757-27A0153 Original Issue. The change completed on airplane NT743 by Service
Bulletin 757-27A0153 Original Issue is equivalent to the release of Revision 1 of this service bulletin.
Airplane NT743 has the configuration of a Group 1 airplane".
3. In paragraph 2.C.1., Kits/Parts - Top Kit 012N8932-21: The table now reads:
Kit 012N8932
NotesExisting Part Num-
ber
NameQTYNew Part Number
-21
(b)WASHER4NAS1149D0516J
(b)WASHER4NAS1149D0532J
(b)WASHER4NAS1149D0563J
(b) There are more parts than are necessary.
4. In Paragraph 3.B., Work Instructions - A new step is added after the existing step 6 (page 26) which
reads:
If necessary, to get better access, remove the captain and the first officer's rudder pedal housing
assembly cover. Refer to 757 AMM 27-21-02 for an accepted procedure.
5. In Paragraph 3.B., Work Instructions, Condition 1 - A new step is added after the existing step 1 (page
27) which reads:
If removed, install the captain and the first officer's rudder pedal housing assembly cover. Refer to 757
AMM 27-21-02 for an accepted procedure.
6. In Figure 2, Step 1, the changed washers part numbers are "NAS1149D0516J", "NAS1149D0532J"
and "NAS1149D0563J".
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 09, 2012
757-27A0153Revision 1: October 29, 2012
5 of 5
BOEING SERVICE BULLETIN 757-27A0153
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
