# Boeing Alert Requirements Bulletin 757-29A0071 RB: Revision 1, part 7 of 8

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2026-11821, the docket of a proposed AD (Federal Register 2026-22383). Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Requirements Bulletin 757-29A0071 RB](https://openairdocs.org/service-documents/boeing/757-29a0071-rb.md)
- Title as filed: 757-29A0071 RB R1_Part7
- Pages: 15
- PDF: https://openairdocs.org/files/sha256/36/44/3644b51d2dd030da249aabefe2d2d40d7d8f78fdf1ad209553d2ac5ce01c57cf
- Page: https://openairdocs.org/service-documents/boeing/757-29a0071-rb/file/3644b51d2dd0

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

FIGURE 29: BETWEEN P33 PANEL AND DISCONNECT BRACKET AD0881 - WIRE BUNDLE W4236 - WIRE
ROUTING
(SHEET 10 OF 12)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: November 16, 2023
757-29A0071 RBRevision 1 May 28, 2026
124 of 286
REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT

### Page 2

FIGURE 29: BETWEEN P33 PANEL AND DISCONNECT BRACKET AD0881 - WIRE BUNDLE W4236 - WIRE
ROUTING
(SHEET 11 OF 12)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: November 16, 2023
757-29A0071 RBRevision 1 May 28, 2026
125 of 286
REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT

### Page 3 (OCR)

REQUIREMENTS BULLETIN 757-29A0071
ALERT  ALERT
STA  STA
900  860
FEEDTHRU
W4236
AD0881 (AD881)
DISCONNECT
BRACKET
D43412J
POS 14
GD5490S
ROTATED
RIGHT BODY FAIRING  2993499
FIGURE 29: BETWEEN P33 PANEL AND DISCONNECT BRACKET AD0881 - WIRE BUNDLE W4236 - WIRE
ROUTING
(SHEET 12 OF 12)
Original Issue: November 16, 2023
Revision 1 May 28, 2026  Export Controlled ECCN: 9E991  757-29A0071 RB
See page 1 for details  126 of 286

### Page 4 (OCR)

REQUIREMENTS BULLETIN 757-29A0071
ALERT  ALERT
_ This Figure applies only to: Group 5, Configuration 1.
W4236
AD0881 (AD881)
-10
AP0033 (P33)  PRESSURE SEAL  2 LOCATIONS
2 LOCATIONS
2 LOCATIONS 15
2519R-10  2
W1230  W2514
2519B-10
2 LOCATIONS
D43312P
POS 11  QI: GD5490-ST  D43412J
POS 14
> FIND NUMBER  • ADDED WIRE OR NEW ROUTING  2992182
REFERENCE: 757 WDM 29-22-11
The find numbers (No.) shown below agree with the find number symbol in the figure.
Find
No.  Name  Identification  Qty  More Data
1  CONTACT, SOCKET  P-204541  4  (a)
2  CONNECTOR, ELECTRI-  BACC63BV18F8S8  1  (a)
CAL, RECEPTACLE,
FLANGE MOUNT,
THREADED COUPLING,
VIBR. RES.
BACKSHELL  BACC10KD18  1  (b)
SLEEVE, OVERBRAID  280N3381-10301  1  (c)
5  TERMINAL  -, LUC  BACT12AC12  1  (d) (e) (f)
WASHER  BACW10BР3APU  1  (f) (s)
NUT  BACN10JC3CM  1  (f)(s)
PLUG, END SEAL  MS27488-12-2  6  (a)
7  ID - EQUIPMENT  280N3381-10701  1  (g)
ID - WIRE  280N3381-10303  12  (n)
9  ID - BUNDLE  280N3381-10304  2  (i)
FIGURE 30: BETWEEN P33 AND DISCONNECT BRACKET AD0881 - WIRE BUNDLE W4236 - INSTALLATION
(SHEET 1 OF 3)
Original Issue: November 16, 2023
Revision 1 May 28, 2026  757-29A0071 RB
Export Controlled ECCN: 9E991
See page 1 for details  127 of 286

### Page 5

More DataQtyIdentificationName
Find
No.
(j)(k)2829A9003-384INSULATION SLEEVING,
HEAT SHRINKABLE, YEL-
LOW, IN DIA 3/8", CLASS
1
10
(k)(l)2829A9003-124INSULATION SLEEVING,
HEAT SHRINKABLE, YEL-
LOW, IN DIA .5 INCH
CLASS 1
11
(k)(n)1280N3381-10305SLEEVE, EXPANDABLE12
(d)(e)(f)1BACT12AC56TERMINAL, LUG13
(o)-280N3381-107WWIRE - RAW MATERIAL15
(p)-280N3381-1001LACING TAPE - BLUE -
PRESSURIZED (TEMP 135
DEG)
(q)(r)-BACS38K1STRAP
(q)(r)-BACS38K4STRAP
(q)(r)-BACS38K5STRAP
(m)1280N3381-12506ID - GROUND20
(a) Refer to SWPM 20-61-11 as an accepted procedure.
(b) Refer to SWPM 20-60-09 as an accepted procedure.
(c) Install between the pressure seal and the electrical connector. Refer to SWPM 20-25-11 as an accepted
procedure.
(d) Refer to SWPM 20-30-11 as an accepted procedure.
(e) Refer to SWPM 20-20-00 as an accepted procedure.
(f) Refer to SWPM 20-20-10, Category 6 as an accepted procedure.
(g) Install within 6 inches of equipment.
(h) Install within 4 inches of equipment and at 72 inches +/- 1 inch spaces between ID tapes.
(i) Install over sleeve, overbraid within 12 inches of the electrical connector and pressure seal.
(j) Install over ends of sleeve, expandable.
(k) Refer to SWPM 20-10-14 as an accepted procedure.
(l) Install over ends of sleeve, overbraid.
(m) Install within 4 inches of ground.
(n) Install under the sleeve, overbraid.
(o) Refer to SWPM 20-10-11 as an accepted procedure.
FIGURE 30: BETWEEN P33 AND DISCONNECT BRACKET AD0881 - WIRE BUNDLE W4236 - INSTALLATION
(SHEET 2 OF 3)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: November 16, 2023
757-29A0071 RBRevision 1 May 28, 2026
128 of 286
REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT

### Page 6

More DataQtyIdentificationName
Find
No.
(p) Refer to SWPM 20-10-11 and SWPM 20-10-19 as accepted procedures.
(q) Select the strap size to fit the wire bundle and install at 6 - 8 inch spacing intervals. Refer to SWPM 20-
10-11 as an accepted procedure.
(r) Only install in pressurized areas.
(s) If the part size does not fit, use WASHER BACW10BP( )APU and NUT BACN10JC( )CM as required.
WIRE LIST - CUT AND CODE AS REQUIRED
NOTESMATERIAL SPECIFICATIONLENGTH
(INCHES)
TYPE
CODE
GAGE
COLOR
WIRE
NUMBER
WIRE
BUNDLE
-BMS13-48T10C02G010821PB102519BW4236
-PB102519RW4236
FIGURE 30: BETWEEN P33 AND DISCONNECT BRACKET AD0881 - WIRE BUNDLE W4236 - INSTALLATION
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: November 16, 2023
757-29A0071 RBRevision 1 May 28, 2026
129 of 286
REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT

### Page 7 (OCR)

REQUIREMENTS BULLETIN 757-29A0071
ALERT  ALERT
This Figure applies only to: Group 5, Configuration 1.
STA
870
S-19R -
S-20R
BUNDLE  WIRE  STA  879  FWD  STA  860
VIEW LOOKING INBOARD
2993233
FIGURE 31: RIGHT BODY FAIRING - FEEDTHRU - INSTALLATION
(SHEET 1 OF 2)
Original Issue: November 16, 2023
Revision 1 May 28, 2026  757-29A0071 RB
Export Controlled ECCN: 9E991
See page 1 for details  130 of 286

### Page 8

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
-1-RING, RETAININGRemove1
-2-SEALRemove
-1-SEAL, RINGRemove
(a)1BACS11BD5 (BACS11BD6
optional)
SEAL, RINGInstall (New)2
(a)2BACS45B3SEALInstall (New)
(a)1MS16624-2156RING, RETAINING,
EXT
Install (New)
(a)-BMS5-37, CLASS B-1/2
(BMS5-37, CLASS B-2 or
BMS5-45, CLASS B-2 or
BMS5-45, CLASS B-1/2
optional)
SEALANTApply3
(a) Refer to SWPM 20-10-20 as an accepted procedure.
FIGURE 31: RIGHT BODY FAIRING - FEEDTHRU - INSTALLATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: November 16, 2023
757-29A0071 RBRevision 1 May 28, 2026
131 of 286
REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT

### Page 9 (OCR)

REQUIREMENTS BULLETIN 757-29A0071
ALERT  ALERT
This Figure applies only to: Group 5, Configuration 1.
STA
870
W4236
W4236
ALTERNATIVE
CONFIGURATION
34€
S  STA  STA
860  879
W4236
NEW
FEEDTHRU
S-18R -
S-19R -
S-20R -
RIGHT FORWARD CARGO COMPARTMENT MIXBAY  3013276
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
FIGURE 32: RIGHT FORWARD CARGO MIXBAY - WIRE BUNDLE W4236 CLAMP - INSTALLATION
(SHEET 1 OF 2)
Original Issue: November 16, 2023
Revision 1 May 28, 2026  Export Controlled ECCN: 9E991  757-29A0071 RB
See page 1 for details  132 of 286

### Page 10

More DataQtyIdentificationNameTaskStep
(a)(b)(e)(f)1BACC10GE8CLAMP, LOOPInstall (New)1
(a)(b)(c)(e)(f)-35450-1BUSHING RUBBERInstall (New)2
(a)(b)(e)(f)1NAS1149D0332JWASHERInstall (New)3
(a)(b)(d)(e)(f)1BACS12GU3K8SCREWInstall (New)4
(a)(b)(e)(f)1BACN10YR3CDNUTInstall (New)5
-1BACS12GU3K( )SCREWRemove6
(a)(b)1287T0011-1CLAMP OLYMPICInstall (New)
(a)(b)(c)135450-1BUSHING RUBBERInstall (New)
(a)(b)(d)1BACS12GU3K12SCREWInstall (New)
(a)(b)1BACS38W3STRAPInstall (New)
(a) Alternate part numbers are acceptable that meet the requirements for SWPM 20-10-12.
(b) Refer to SWPM 20-10-12 as an accepted procedure.
(c) Use quantity of rubber bushings as necessary.
(d) It is acceptable to use one grip length up or down as necessary.
(e) If a ring post is found at this location, the ring post can be kept and used in place of the clamp.
(f) If no clamp or ring post is found at this location, do steps 1 through 5. If an existing clamp is found, do
step 6.
FIGURE 32: RIGHT FORWARD CARGO MIXBAY - WIRE BUNDLE W4236 CLAMP - INSTALLATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: November 16, 2023
757-29A0071 RBRevision 1 May 28, 2026
133 of 286
REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT

### Page 11 (OCR)

REQUIREMENTS BULLETIN 757-29A0071
ALERT  ALERT
_ This Figure applies only to: Group 5, Configuration 1.
STA
900
STA  STA
900  860
AD0881 (AD881)
DISCONNECT
BRACKET
D43412J
POS 14
W4236
4 LOCATIONS
RIGHT BODY FAIRING
W4236
4 LOCATIONS
2993683
FIGURE 33: DISCONNECT BRACKET AD0881 - ELECTRICAL CONNECTOR D43412J- INSTALLATION
(SHEET 1 OF 2)
Original Issue: November 16, 2023
Revision 1 May 28, 2026  757-29A0071 RB
Export Controlled ECCN: 9E991
See page 1 for details  134 of 286

### Page 12

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
(a)4BACS12HN04-8SCREWInstall (New)1
(a)4NAS1149DN416JWASHERInstall (New)
(a)4BACN10YR04CDNUTInstall (New)2
(a) Refer to SWPM 20-60-06 as an accepted procedure.
FIGURE 33: DISCONNECT BRACKET AD0881 - ELECTRICAL CONNECTOR D43412J - INSTALLATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: November 16, 2023
757-29A0071 RBRevision 1 May 28, 2026
135 of 286
REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT

### Page 13

This Figure applies only to: Group 5, Configuration 1.
REFERENCE: 757 WDM 29-22-11
DescriptionFlag Note
Alternatively, deleted wire(s) can be capped and stowed. Refer to SWPM 20-10-11 as
an accepted procedure.
A
Seal connector cavities of deleted wire or capped and stowed with Plug, End Seals.
Refer to SWPM 20-60-08 as an accepted procedure.
B
FIGURE 34: BETWEEN DISCONNECT BRACKET AD0881 AND POWER TRANSFER UNIT CONTROL
VALVE - WIRE BUNDLE W2514 - REMOVAL
(SHEET 1 OF 1)
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: November 16, 2023
757-29A0071 RBRevision 1 May 28, 2026
136 of 286
REQUIREMENTS BULLETIN 757-29A0071
ALERTALERT

### Page 14 (OCR)

REQUIREMENTS BULLETIN 757-29A0071
ALERT  ALERT
_ This Figure applies only to: Group 5, Configuration 1.
Y STA  900  STA  860
STA
1060  STA
900
AD0881 (AD881)
DISCONNECT
BRACKET
W2514
D43412P
POS 14
RIGHT BODY FAIRING  2993558
FIGURE 35: BETWEEN DISCONNECT BRACKET AD0881 AND POWER TRANSFER UNIT CONTROL
VALVE - WIRE BUNDLE W2514 - WIRE ROUTING
(SHEET 1 OF 3)
Original Issue: November 16, 2023
Revision 1 May 28, 2026  Export Controlled ECCN: 9E991  757-29A0071 RB
See page 1 for details  137 of 286

### Page 15 (OCR)

REQUIREMENTS BULLETIN 757-29A0071
ALERT  ALERT
STA
900
~ W2514
STA
1040
RIGHT LOWER STUB AND KEEL BEAM  2993562
FIGURE 35: BETWEEN DISCONNECT BRACKET AD0881 AND POWER TRANSFER UNIT CONTROL
VALVE - WIRE BUNDLE W2514 - WIRE ROUTING
(SHEET 2 OF 3)
Original Issue: November 16, 2023
Revision 1 May 28, 2026  757-29A0071 RB
Export Controlled ECCN: 9E991
See page 1 for details  138 of 286

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
