# Boeing Alert Service Bulletin 757-52A0091: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2013-0300; AD 2015-25-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 757-52A0091](https://openairdocs.org/service-documents/boeing/757-52a0091.md)
- Title as filed: U.S. DOT/FAA - SB-757-52A0091-00
- Pages: 55
- PDF: https://openairdocs.org/files/sha256/35/96/3596385788c7e4e17f735662880e0238d41568498825f128aa69b3cbde2e1efc
- Page: https://openairdocs.org/service-documents/boeing/757-52a0091/file/3596385788c7

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
757
Service Bulletin
ALERT
Number: 757-52A0091
Original Issue: March 09, 2010
ATA System: 5232
SUBJECT: DOORS - Main Cargo Door - Cam Latch and Latch Pin Inspection and Modification
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2010 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
1 of 55
5.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
2 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A. Effectivity ................................................ 9
1. Airplanes ............................................. 9
2. Spares Affected ........................................ 1 0
B. Concurrent Requirements ...................................... 1 0
C. Reason ................................................ 1 0
D. Description .............................................. 1 1
E. Compliance .............................................. 1 1
F. Approval ............................................... 1 9
G. Manpower .............................................. 1 9
H. Weight and Balance Changes .................................... 2 0
I. Electrical Load Data ......................................... 2 0
J. References .............................................. 2 0
1. Existing Data .......................................... 2 0
2. Data supplied with this Service Bulletin ............................ 2 0
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 2 1
K. Publications Affected ........................................ 2 1
L. Interchangeability and Intermixability of Parts ........................... 2 1
2. MATERIAL INFORMATION ........................................ 2 3
A. Material - Price and Availability ................................... 2 3
B. Industry Support Information .................................... 2 3
C. Parts Necessary For Each Airplane ................................. 2 3
1. Kits/Parts ............................................ 2 3
2. Parts and Materials Supplied by the Operator ........................ 2 3
3. Parts Modified and Reidentified ................................ 2 3
4. Parts Removed and Not Replaced .............................. 2 4
D. Parts Necessary to Change Spares ................................. 2 4
E. Special Tooling - Price and Availability ............................... 2 4
F. Special Tooling Necessary to do this Service Bulletin ....................... 2 4
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 5
A. GENERAL INFORMATION ..................................... 2 5
B. WORK INSTRUCTIONS ....................................... 2 6
FIGURE 1: MAIN CARGO DOOR - CAM LATCHES AND LATCH PINS INSPECTION ......... 3 1
FIGURE 2: MAIN CARGO DOOR - LATCH PIN CROSS BOLT TORQUE MEASUREMENT ..... 3 4
FIGURE 3: MAIN CARGO DOOR - LATCH PIN EXTENSION MEASUREMENT ............ 3 6
FIGURE 4: MAIN CARGO DOOR - CAM LATCH 1 AND CAM LATCH 2 INSPECTION ........ 3 8
FIGURE 5: MAIN CARGO DOOR - LATCH PIN CROSS BOLT REPLACEMENT ........... 4 0
FIGURE 6: MAIN CARGO DOOR - CAM LATCH REPLACEMENT ................... 4 2
FIGURE 7: MAIN CARGO DOOR - LATCH PIN REPLACEMENT .................... 4 5
FIGURE 8: MAIN CARGO DOOR - CAM LATCH REMOVAL AND INSPECTION ........... 4 7
FIGURE 9: MAIN CARGO DOOR - CAM LATCHES AND LATCH PINS INSPECTION ......... 4 9
FIGURE 10: MAIN CARGO DOOR - CAM LATCH AND LATCH PIN RIGGING ............. 5 1
FIGURE 11: MAIN CARGO DOOR - MAIN CARGO DOOR EDGE FLUSHNESS MEASUREMENT . . 54
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
3 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 4

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
4 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
757
Service Bulletin
ALERT
SummaryNumber: 757-52A0091Original Issue: March 09, 2010
ATA System: 5232
SUBJECT: DOORS - Main Cargo Door - Cam Latch and Latch Pin Inspection and Modification
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Accomplishment of the inspections in this service bulletin will make sure the Main Cargo Door (MCD) cam latches
are inspected for wear and the latch pins are inspected for migration. The inspections are necessary in order
to find and replace worn cam latches, latch pins and latch pin attachment bolts. If not replaced, worn cam latches,
latch pins and latch pin attachment bolts could lead to a failure of the cam latches and may result in a possible
rapid decompression and potential separation of the cargo door from the airplane.
Boeing has received one report from one operator that the MCD forward most cam latch on the forward center
cam latch pair (cam latch number 3) broke during flight. The airplane that reported the broken cam latch had
20,000 flight hours and 9,500 flight cycles when the cam latch broke. The crew heard a loud noise coming from
the MCD shortly after cruise. Upon landing, an inspection was performed and a cam latch was found broken.
The broken cam latch mating latch pin was also found to have significant wear as evidenced by the loss of the
plating on the surface that is normally in contact with the cam. The latch pin was also deformed approximately
0.05 inch in the area of the wear surface.
The cause of the broken cam latch has been determined to be from a poorly rigged MCD. Although properly
rigged per the original Aircraft Maintenance Manual (AMM) procedures, significant variation was allowed in the
rigging dimensions. This variation can cause some of the latch pin/cam latch locations to have a significant
preload placed on them during engagement and rotation of the cam latches during latching and unlatching
operations. This preload is believed to have imparted a torque on the latch pin from the cam latch rotation during
latching and unlatching operations. The torque transmitted to the latch pin is then believed to have caused the
latch pin cross bolt to fail in shear. In addition, the cross bolt that attaches the latch pin had signs of corrosion
on the fracture surfaces.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
5 of 55

### Page 6

If the cross bolt fails, the latch pin could migrate either towards the cam latch or away from the cam latch. Latch
pin migration towards the cam latch can cause significant interference with the mating cam latch leading to cam
latch damage. In this case, the latch pin migrated into the cam latch and caused damage to the cam latch. The
crack initiated at the damage site caused by the latch pin and then lead to the cam latch breaking. Latch pin
migration away from the cam latch could cause disengagement from the cam latch, resulting in no load transfer
between the cam latch and the mating latch pin and may not be noticed before critical conditions are exceeded.
Accomplishment of the work given in this service bulletin will make sure the cam latches, latch pins and latch
pins cross bolts are inspected and replaced if wear is found. The MCD will also be re-rigged to the requirements
for door flushness, cam latch/latch pin concentricity, latch pin fitting forward/aft gap and shim thickness.
Boeing Service Related Problem (SRP) 757-SRP-52-0088 is related to this service bulletin.
ACTION
Get access to the MCD. Do a detailed inspection of the cam latches and latch pins. Check the torque of the
cross bolts in the latch pins. Measure the extension of the latch pins. Replace all alloy steel cross bolts through
the latch pins with Corrosion Resistant Steel (CRES) cross bolts. Do a High Frequency Eddy Current (HFEC)
or alternate magnetic particle inspection of cam latch 1 and cam latch 2 for signs of cracks. Replace any cracked
or broken parts. Rig and check the MCD to the requirements for door flushness, cam latch/latch pin concentricity,
latch pin fitting forward/aft gap and shim thickness. Perform post rigging inspections in accordance with this
service bulletin.
EFFECTIVITY
757-200CB, 757-200PF and 757-200 Special Freighter delivered under a Boeing Supplemental Type Certificate
(STC) Airplanes. Refer to Paragraph 1.A.1., Airplanes for the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspections and modifications given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
6 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 7 (OCR)

BOEING SERVICE BULLETIN 757-52A0091
ALERT  ALERT
MAIN CARGO DOORWAY
LOWER SILL
LATCH PIN
• DO A DETA  N OF THE CAM LATCHES AND LATCH PINS.
CHECK THE TORQUE  HE CROSS BOLTS IN THE LATCH PINS.
MEASURE THE I  OF THE LATCH PINS.
• REPLACE ALL '  HE A  STEEL CROSS BOLTS THROUGH THE
LATCH PINS I  OSS BOLTS.
DO A HFEC OR A  : MAGNETIC PARTICLE INSPECTION
OF CAM LATCH 1 AND  LATCH 2 FOR SIGNS OF CRACKS.
- RIG AND CHECK THE M  IN ACCORDANCE WITH THE REQUIREMENTS
FOR DOOR  USHNES  V LATCH/LATCH PIN CONCENTRICITY, LATCH
PIN FITTING  GAP AND SHIM THICKNESS.
CAM LATCH
1672966
Original Issue: March 09, 2010
757-52A0091
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  7 of 55

### Page 8

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
8 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
757
Service Bulletin
ALERT
Number: 757-52A0091
Original Issue: March 09, 2010
ATA System: 5232
SUBJECT: DOORS - Main Cargo Door - Cam Latch and Latch Pin Inspection and Modification
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D624N001 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below.
DESCRIPTIONCONFIGURATIONGROUP
757-200PF, 757-200CB and 757-200 Special Freighter delivered
under a Boeing Supplemental Type Certificate (STC) Airplanes
-1
Airplane Models:
757-200, 757-200CB, 757-200PF
GroupVariable Number
1NA201 - NA204
1NA206 - NA213
1NA215 - NA236
1NC901 - NC951
1NC971
1NC973 - NC974
1ND895
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
9 of 55

### Page 10

GroupVariable Number
1NS601 - NS616
1NT001 - NT009
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
Accomplishment of the inspections in this service bulletin will make sure the Main Cargo Door (MCD)
cam latches are inspected for wear and the latch pins are inspected for migration. The inspections are
necessary in order to find and replace worn cam latches, latch pins and latch pin attachment bolts. If
not replaced, worn cam latches, latch pins and latch pin attachment bolts could lead to a failure of the
cam latches and may result in a possible rapid decompression and potential separation of the cargo
door from the airplane.
Boeing has received one report from one operator that the MCD forward most cam latch on the forward
center cam latch pair (cam latch number 3) broke during flight. The airplane that reported the broken
cam latch had 20,000 flight hours and 9,500 flight cycles when the cam latch broke. The crew heard
a loud noise coming from the MCD shortly after cruise. Upon landing, an inspection was performed
and a cam latch was found broken. The broken cam latch mating latch pin was also found to have
significant wear as evidenced by the loss of the plating on the surface that is normally in contact with
the cam. The latch pin was also deformed approximately 0.05 inch in the area of the wear surface.
The cause of the broken cam latch has been determined to be from a poorly rigged MCD. Although
properly rigged per the original Aircraft Maintenance Manual (AMM) procedures, significant variation
was allowed in the rigging dimensions. This variation can cause some of the latch pin/cam latch locations
to have a significant preload placed on them during engagement and rotation of the cam latches during
latching and unlatching operations. This preload is believed to have imparted a torque on the latch pin
from the cam latch rotation during latching and unlatching operations. The torque transmitted to the
latch pin is then believed to have caused the latch pin cross bolt to fail in shear. In addition, the cross
bolt that attaches the latch pin had signs of corrosion on the fracture surfaces.
If the cross bolt fails, the latch pin could migrate either towards the cam latch or away from the cam
latch. Latch pin migration towards the cam latch can cause significant interference with the mating cam
latch leading to cam latch damage. In this case, the latch pin migrated into the cam latch and caused
damage to the cam latch. The crack initiated at the damage site caused by the latch pin and then lead
to the cam latch breaking. Latch pin migration away from the cam latch could cause disengagement
from the cam latch, resulting in no load transfer between the cam latch and the mating latch pin and
may not be noticed before critical conditions are exceeded.
Accomplishment of the work given in this service bulletin will make sure the cam latches, latch pins
and latch pins cross bolts are inspected and replaced if wear is found. The MCD will also be re-rigged
to the requirements for door flushness, cam latch/latch pin concentricity, latch pin fitting forward/aft gap
and shim thickness.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
10 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 11

Boeing Service Related Problem (SRP) 757-SRP-52-0088 is related to this service bulletin.
D. Description
Get access to the MCD. Do a detailed inspection of the cam latches and latch pins. Check the torque
of the cross bolts in the latch pins. Measure the extension of the latch pins. Replace all alloy steel cross
bolts through the latch pins with CRES cross bolts. Do a HFEC or alternate magnetic particle inspection
of cam latch 1 and cam latch 2 for signs of cracks. Replace any cracked or broken parts. Rig and check
the MCD to the requirements for door flushness, cam latch/latch pin concentricity, latch pin fitting
forward/aft gap and shim thickness. Perform post rigging inspections in accordance with this service
bulletin.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
838757-200, 757-200CB, 757-
200PF
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Table 1: Initial (Pre-Rigging) Inspections of the Cam Latches and Latch Pins for the Main Cargo Door
(MCD)
Repeat Interval (Not
to Exceed)
Compliance TimeActionCondition
-Within 330 flight
cycles or 150 days
after the original is-
sue date of this
service bulletin.
(whichever occurs
first)
Do the following for all MCD cam latches
and latch pins:
Do a detailed inspection of the cam
latches and latch pins in accordance with
Accomplishment Instruction 3.B.1.b.
And
Torque the cross bolts in the latch pins
in accordance with Accomplishment In-
struction 3.B.1.c.
All airplanes
And
Measure the extension of the latch pins
in accordance with Accomplishment In-
struction 3.B.1.d.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
11 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 12

Table 1: Initial (Pre-Rigging) Inspections of the Cam Latches and Latch Pins for the Main Cargo Door
(MCD)
Repeat Interval (Not
to Exceed)
Compliance TimeActionCondition
-Before further flightReplace all cracked or broken part(s) in
accordance with Accomplishment Instruc-
tion 3.B.2.a.
Inspection Condition 1 -
If the inspections reveal
one or more of the follow-
ing: And
1. Cracked or
broken cam
latch(es)
2. Cracked or
broken latch
pin(s)
3. Broken latch
pin cross
bolt(s)
Unless replaced with new parts, do a
HFEC or alternate magnetic particle in-
spection of cam latch 1 and cam latch 2
in accordance with Accomplishment In-
struction 3.B.2.b.
And
Rig and check the MCD in accordance
with Accomplishment Instruction 3.B.2.c.
And
Replace all alloy steel cross bolts
through the latch pins with CRES cross
bolts in accordance with Accomplish-
ment Instruction 3.B.2.c.
-Within 330 flight
cycles or 150 days
after the initial in-
spection (whichev-
er occurs first)
Contact Boeing and provide a detailed
description of the cam latch deforma-
tions for rework instructions and perform
the applicable rework in accordance with
Accomplishment Instruction 3.B.3.a.(a)
Inspection Condition 2 -
If the inspections reveal
one or more of the follow-
ing:
1. Local deforma-
tion of the cam
latch lip.
2. Flaking of the
chrome plating
on the cam
latch or latch
pin.
3. Wear of the
chrome plating
down to the
base material
of the cam
latch or latch
pin.
And
Replace all cam latches and latch pins
in accordance with Accomplishment In-
struction 3.B.3.b.(b)
And
330 flight cycles or 150
days (whichever oc-
curs first)
Within 330 flight
cycles or 150 days
after the initial in-
spection (whichev-
er occurs first)
Do a detailed inspection of the cam
latches and latch pins in accordance with
Accomplishment Instruction 3.B.3.c.
And
-Within 3000 flight
cycles or 24
months after the
original issue date
of this service bul-
letin (whichever
occurs first)
Do a HFEC or alternate magnetic parti-
cle inspection of cam latch 1 and cam
latch 2 in accordance with Accomplish-
ment Instruction 3.B.3.d.
And
Rig and check the MCD in accordance
with Accomplishment Instruction 3.B.3.e.
And
Replace all alloy steel cross bolts
through the latch pins with CRES cross
bolts in accordance with Accomplish-
ment Instruction 3.B.3.e.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
12 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 13

Table 1: Initial (Pre-Rigging) Inspections of the Cam Latches and Latch Pins for the Main Cargo Door
(MCD)
Repeat Interval (Not
to Exceed)
Compliance TimeActionCondition
-Before further flightContact Boeing and provide a detailed
description of the inspection findings
(and photographs, if possible) in accor-
dance with Accomplishment Instruction
3.B.4.a.
Inspection Condition 3 -
If the initial inspections
reveal one or more signs
of the following:
1. Corrosion of
the cam latch
or latch pin.
2. Gouges and/or
scrapes in the
cam latch or
latch pin
chrome plating
or base materi-
al.
3. Deformations
of the cam
latch or latch
pin.
4. Any other dam-
age not identi-
fied in Inspec-
tion Conditions
1 and 2.
And
Contact Boeing for additional inspection
and/or repair instructions and perform
applicable inspection and/or repair in
accordance with Accomplishment Instruc-
tion 3.B.4.b.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
13 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 14

Table 1: Initial (Pre-Rigging) Inspections of the Cam Latches and Latch Pins for the Main Cargo Door
(MCD)
Repeat Interval (Not
to Exceed)
Compliance TimeActionCondition
-Within 330 flight
cycles or 150 days
after the initial in-
spection (whichev-
er occurs first)
Replace the latch pin in accordance with
Accomplishment Instruction 3.B.5.a.(1).
And
Remove the mating cam latch and do a
detailed inspection in accordance with
Accomplishment Instruction 3.B.5.a.(2).
Inspection Condition 4.1
- If the latch pin exten-
sion is less that 0.84
inches or greater than
0.94 inches
And
-Within 3000 flight
cycles or 24
months after the
original issue date
of this service bul-
letin (whichever
occurs first)
Do a HFEC or alternate magnetic parti-
cle inspection of cam latch 1 and cam
latch 2 in accordance with Accomplish-
ment Instruction 3.B.5.a.(3).
And
Rig and check the MCD in accordance
with Accomplishment Instruction
3.B.5.a.(4).
And
Replace all alloy steel cross bolts
through the latch pins with CRES cross
bolts in accordance with Accomplish-
ment Instruction 3.B.5.a.(4).
330 flight cycles or 150
days (whichever oc-
curs first)
Within 330 flight
cycles or 150 days
after the initial in-
spection (whichev-
er occurs first)
Do a detailed inspection of the cam
latches and latch pins in accordance with
Accomplishment Instruction 3.B.5.b.(1).
And
Inspection Condition 4.2
- If the latch pin exten-
sion is between 0.84
and 0.89 inches or be-
tween 0.91 and 0.94
inches -Within 3000 flight
cycles or 24
months after the
original issue date
of this service bul-
letin (whichever
occurs first)
Do a HFEC or alternate magnetic parti-
cle inspection of cam latch 1 and cam
latch 2 in accordance with Accomplish-
ment Instruction 3.B.5.b.(2).
And
Rig and check the MCD in accordance
with Accomplishment Instruction
3.B.5.b.(3).
And
Replace all alloy steel cross bolts
through the latch pins with CRES cross
bolts in accordance with Accomplish-
ment Instruction 3.B.5.b.(3).
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
14 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 15

Table 1: Initial (Pre-Rigging) Inspections of the Cam Latches and Latch Pins for the Main Cargo Door
(MCD)
Repeat Interval (Not
to Exceed)
Compliance TimeActionCondition
330 flight cycles or 150
days (whichever oc-
curs first)
Within 330 flight
cycles or 150 days
after the initial in-
spection (whichev-
er occurs first)
Do a general visual inspection in accor-
dance with Accomplishment Instruction
3.B.6.a.
And
Inspection Condition 5 -
If the inspections reveal
no signs of damage,
distress or incorrect rig-
ging as described in In-
spection Conditions 1
through 4. 3000 flights or 24months (whichever oc-
curs first)
Within 3000 flight
cycles or 24
months after the
initial inspection
(whichever occurs
first)
Do a detailed inspection of the cam
latches and latch pins in accordance with
Accomplishment Instruction 3.B.6.b.
And
Do a HFEC or alternate magnetic parti-
cle inspection of cam latch 1 and cam
latch 2 in accordance with Accomplish-
ment Instruction 3.B.6.c
And
-Within 6000 flight
cycles or 48
months after the
original issue date
of this service bul-
letin (whichever
occurs first)
Rig and check the MCD in accordance
with Accomplishment Instruction 3.B.6.d.
And
Replace all alloy steel cross bolts
through the latch pins with CRES cross
bolts in accordance with Accomplish-
ment Instruction 3.B.6.d.
(a) Boeing recommends the operator provide a detailed description of the cam latch deformations (including
size and location, as well as the total number of flights the cam latch has been in service) so that Boeing
has time to determine rework instructions and the operator has time to organize the resources needed to
complete the changes within the applicable compliance period.
(b) There is a possibility the cam latch or latch pin can be refinished with new chrome plating. Before a cam
latch or latch pin can be reused, the operator must provide Boeing with a detailed description of the chrome
damage, including size and location, as well as the total number of flights the cam latch or latch pin has
been in service. Boeing will use this information to determine if the cam latch or latch pin can be refinished
and reused.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
15 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 16

Table 2: Repetitive Post-Rigging Inspections of the Cam Latches and Latch Pins for the Main Cargo
Door (MCD)
Repeat Interval (Not
to Exceed)
Compliance TimeActionCondition
330 flight cycles or 150
days (whichever oc-
curs first)
Within 330 flight
cycles or 150 days
after the MCD ad-
justment and check
(whichever occurs
first)
Do a general visual inspection in accor-
dance with Accomplishment Instruction
3.B.7.a.(1).
And
All airplanes
3000 flights or 24
months (whichever oc-
curs first)
Within 3000 flight
cycles or 24
months after the
MCD adjustment
and check
(whichever occurs
first)
Do a detailed inspection of the cam
latches and latch pins in accordance with
Accomplishment Instruction 3.B.7.a.(2).
And
6000 flights or 48
months (whichever oc-
curs first)
Within 6000 flight
cycles or 48
months after the
MCD adjustment
and check
(whichever occurs
first)
Do a HFEC or alternate magnetic parti-
cle inspection of cam latch 1 and cam
latch 2 in accordance with Accomplish-
ment Instruction 3.B.7.a.(3).
-Before further flightReplace all cracked or broken part(s) in
accordance with Accomplishment Instruc-
tion 3.B.7.b.(1).
Post-rigging Inspection
Condition 1 - If the in-
spections reveal one or
more of the following: And
1. Cracked or
broken cam
latch(es)
2. Cracked or
broken latch
pin(s)
3. Broken latch
pin cross
bolt(s)
Unless replaced with new parts, do a
HFEC or alternate magnetic particle in-
spection of cam latch 1 and cam latch 2
in accordance with Accomplishment In-
struction 3.B.7.b.(2).
And
Rig and check the MCD in accordance
with Accomplishment Instruction
3.B.7.b.(3).
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
16 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 17

Table 2: Repetitive Post-Rigging Inspections of the Cam Latches and Latch Pins for the Main Cargo
Door (MCD)
Repeat Interval (Not
to Exceed)
Compliance TimeActionCondition
-Within 330 flight
cycles or 150 days
after the post-rig-
ging inspection
(whichever occurs
first)
Contact Boeing and provide a detailed
description of the cam latch deforma-
tions for rework instructions and perform
the applicable rework in accordance with
Accomplishment Instruction
3.B.7.c.(1).(a)
Post-rigging Inspection
Condition 2 - If the in-
spections reveal one or
more of the following:
1. Local deforma-
tion of the cam
latch lip.
2. Flaking of the
chrome plating
on the cam
latch or latch
pin.
3. Wear of the
chrome plating
down to the
base material
of the cam
latch or latch
pin.
And
Replace all cam latches and latch pins
in accordance with Accomplishment In-
struction 3.B.7.c.(2).(b)
And
330 flight cycles or 150
days (whichever oc-
curs first)
Within 330 flight
cycles or 150 days
after the post-rig-
ging inspection
(whichever occurs
first)
Do a detailed inspection of the remaining
cam latches and latch pins in accor-
dance with Accomplishment Instruction
3.B.7.c.(3).
And
-Within 3000 flight
cycles or 24
months after the
post-rigging inspec-
tion (whichever oc-
curs first)
Do a HFEC or alternate magnetic parti-
cle inspection of cam latch 1 and cam
latch 2 in accordance with Accomplish-
ment Instruction 3.B.7.c.(4).
And
Rig and check the MCD in accordance
with Accomplishment Instruction
3.B.7.c.(5).
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
17 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 18

Table 2: Repetitive Post-Rigging Inspections of the Cam Latches and Latch Pins for the Main Cargo
Door (MCD)
Repeat Interval (Not
to Exceed)
Compliance TimeActionCondition
-Before further flightContact Boeing and provide a detailed
description of the inspection findings
(and photographs, if possible) in accor-
dance with Accomplishment Instruction
3.B.7.d.(1).
Post-rigging Inspection
Condition 3 - If the in-
spections reveal one or
more signs of the follow-
ing:
And1. Corrosion of
the cam latch
or latch pin.
2. Gouges and/or
scrapes in the
cam latch or
latch pin
chrome plating
or base materi-
al.
3. Deformations
of the cam
latch or latch
pin.
4. Any other dam-
age not identi-
fied in Inspec-
tion Conditions
1 and 2.
Contact Boeing for additional inspection
and/or repair instructions and perform
applicable inspection and/or repair in
accordance with Accomplishment Instruc-
tion 3.B.7.d.(2).
(a) Boeing recommends the operator provide a detailed description of the cam latch deformations (including
size and location, as well as the total number of flights the cam latch has been in service) so that Boeing
has time to determine rework instructions and the operator has time to organize the resources needed to
complete the changes within the applicable compliance period.
(b) There is a possibility the cam latch or latch pin can be refinished with new chrome plating. Before a cam
latch or latch pin can be reused, the operator must provide Boeing with a detailed description of the chrome
damage, including size and location, as well as the total number of flights the cam latch or latch pin has
been in service. Boeing will use this information to determine if the cam latch or latch pin can be refinished
and reused.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
18 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 19

F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do the inspections and modifications
for each airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate
with operator task hour data if necessary. The estimate does not include lost time. These are some
examples of lost time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Elapsed HoursTask HoursNumber of Per-
sons
Task
0.250.251Open Access
1.601.601FIGURE 1
0.500.501FIGURE 2
0.500.501FIGURE 3
1.00(h)1.00(h)1FIGURE 4
1.001.001FIGURE 5
0.50(a) (f) (i)0.50(a) (f) (i)1(i)FIGURE 6
0.10(b) (g)0.10(b) (g)1FIGURE 7
0.60(c)0.60(c)1FIGURE 8
0.10(d)0.10(d)1FIGURE 9
20.048.02-3FIGURE 10 - FIG-
URE 11
0.250.251Close Access
(e)(e)TOTAL FOR EACH AIRPLANE
(a) Estimate is per cam latch requiring replacement.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
19 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 20

Elapsed HoursTask HoursNumber of Per-
sons
Task
(b) Estimate is per latch pin requiring replacement.
(c) Estimate is per cam latch requiring inspection.
(d) Estimate is per cam latch.
(e) Total time required may vary depending upon conditions found during inspec-
tions.
(f) Does not include time to match drill cam shaft.
(g) Does not include time to match drill latch pin
(h) Does not include NDI inspection time
(i) Cam latch 4 will require 2 hours and a second person to remove.
H. Weight and Balance Changes
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
NegligibleNegligible757-200CB
NegligibleNegligible757-200PF
NegligibleNegligible757-200 Special
Freighter
I. Electrical Load Data
Not changed.
J. References
1. Existing Data
a. Boeing Service Related Problem (SRP) 757-SRP-52-0088
b. Standard Overhaul Practices Manual (SOPM) 20-20-01
c. 757 Aircraft Maintenance Manual (AMM) 52-32-00
d. 757 Illustrated Parts Catalog (IPC) 53-33-63-03
e. 757 Non-Destructive Testing (NDT) Manual Part 6, 51-00-12 or 51-00-21
2. Data supplied with this Service Bulletin
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
20 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 21

3. Installation Drawings Used in the Preparation of this Service Bulletin
TitleDrawing Number
DOOR INSTALLATION - MAIN CARGO65-25326
LATCH MECHANISM INSTALLATION - MAIN CARGO DOOR65-25339
SILL INSTL - LOWER, MAIN CARGO DOOR143N8750
LATCH PIN FITTING - ASSY65-67872
CAM - LATCH MECHANISM CARGO DOOR69-23438
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
757 IPC 53-33-63-03757 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated this service bulletin for effects on Fatigue Critical Structure (FCS) and for
changes to Damage Tolerance Inspections (DTI) required in the Maintenance Program. This
service bulletin affects FCS. DTI requirements for the structure affected are contained in Paragraph
1.E., Compliance of this service bulletin.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
21 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 22

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
22 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT
BLANK PAGE

### Page 23

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane. As an alternative, operators can purchase the parts from Boeing Spares. This service bulletin
does not show the Boeing price and supply data.
B. Industry Support Information
Boeing warranty remedies are not available for the inspections and modifications given in this service
bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
NotesExisting Part NumberNameQTYPart Number /
Specification
(a) (b)NAS6603-24BOLT, HEX HEAD, 160 KSI MIN
TENSILE, LONG THREAD, A286,
NONLOCKING
8BACB30LM3-24
OR
BACB30LM3-22
OR
BACB30NF3-22
Parts are on-
ly needed if
existing part
cannot be re-
worked.
69-23438-2Cam Latch 1-69-23438-2
143N8060-1Cam Latch 2-143N8060-1
143N8027-2Cam Latch 3-143N8027-2
69-23439-3Cam Latch 4-69-23439-3
69-23439-4Cam Latch 5-69-23439-4
143N8027-1Cam Latch 6-143N8027-1
143N8060-2Cam Latch 7-143N8060-2
69-23438-1Cam Latch 8-69-23438-1
6-83137-2Latch Pin-6-83137-2
(a) Refer to 757 Structural Repair Manual Chapter 51 for alternate fasteners.
(b) BACB30LM3-24 and NAS6603-24 used if 143N8157-2 Clip Assembly is installed.
NOTE: Rubber Quicksetting Putty (G50673) is needed if the door rigging procedure per 757
AMM 52-32-00 20Sep2008 Revision is used.
3. Parts Modified and Reidentified
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
23 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 24

4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
24 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 25

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. The instructions identified in Paragraph 3.B., Work Instructions and the Figure(s)
give the recommended sequence of steps. The sequence of steps to do this service
bulletin can be changed.
2. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
3. Obey all of the warnings and cautions given in the specified manual sections.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Torque limits to tighten nuts and bolts are in 757 SRM, Chapter 51
5. Use the approved fastener and process material substitutions in accordance with
757 SRM, Chapter 51. Alternate fasteners are listed in 757 SRM Chapter 51 and
Boeing Drawing 65-88700.
6. If the length of any fastener specified in this service bulletin does not meet the
installation standards in SRM Chapter 51, then a fastener of the same specification,
or an approved substitute, with a length which meets the installation standards in
SRM Chapter 51 may be used.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
25 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 26

7. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
8. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance unless otherwise
specified. A mirror may be necessary to ensure visual access to all surfaces in the
inspection area. This level of inspection is made under normal available lighting
conditions such as daylight, hangar lighting, flashlight or drop-light and may require
removal or opening of access panels or doors. Stands, ladders or platforms may be
required to gain proximity to the area being checked.
9. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
B. WORK INSTRUCTIONS
NOTE: It is important to do the following steps in the specified order.
1. Initial Inspections
a. Get access to the Main Cargo Door.
b. Do a detailed inspection of the cam latches and latch pins in accordance with FIGURE 1.
c. Torque the cross bolts in the latch pins in accordance with FIGURE 2.
d. Measure the extension of the latch pins in accordance with FIGURE 3.
2. Inspection Condition 1:
If the inspections reveal one or more signs of the following:
– Cracked or broken cam latch(es)
– Cracked or broken latch pin(s)
– Broken latch pin cross bolts
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
26 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 27

a. Replace cam latch in accordance with FIGURE 6, replace latch pin in accordance with FIGURE
7 and replace latch pin cross bolt in accordance with FIGURE 5.
b. Unless replaced with new parts, do a HFEC or alternate magnetic particle inspection of cam
latch 1 and cam latch 2 for signs of cracks in accordance with FIGURE 4. Address the
inspection findings as described in Inspection Condition 1.
c. Rig and check the Main Cargo Door in accordance with FIGURE 10 and FIGURE 11, and
replace all alloy steel cross bolts through the latch pins with CRES cross bolts in accordance
with FIGURE 5. Refer to 757 AMM 52-32-00 Rev 20Sep2008 as an accepted procedure for
MCD rigging.
3. Inspection Condition 2:
If the inspections reveal one or more signs of the following:
– Local deformation of the cam latch lip
– Flaking of the chrome plating on the cam latch or latch pin
– Wear of the chrome plating down to the base material of the cam latch or latch pin
a. Contact Boeing and provide a detailed description of the cam latch deformations for rework
instructions and perform the applicable rework.
b. Replace all cam latches and latch pins with signs of flaking of the chrome plating or wear
down to the base material in accordance with FIGURE 6 and FIGURE 7.
c. Do a detailed inspection of the cam latches and latch pins in accordance with FIGURE 1.
Address the inspection findings as described in Inspection Conditions 1 through 4.
d. Do a HFEC or alternate magnetic particle inspection of cam latch 1 and cam latch 2 for signs
of cracking in accordance with FIGURE 4. Address the inspection findings as described in
Inspection Condition 1.
e. Rig and check the Main Cargo Door in accordance with FIGURE 10 and FIGURE 11, and
replace all alloy steel cross bolts through the latch pins with CRES cross bolts in accordance
with FIGURE 5. Refer to 757 AMM 52-32-00 Rev 20Sep2008 as an accepted procedure for
MCD rigging.
4. Inspection Condition 3:
If the inspections reveal one or more signs of the following:
– Corrosion of the cam latch or latch pin
– Gouges and/or scrapes in the cam latch or latch pin chrome plating or base material
– Deformations of the cam latch or latch pin
– Any other damage not identified in Inspection Conditions 1 and 2.
a. Contact Boeing and provide a detailed description of the inspection findings (and photographs,
if possible).
b. Contact Boeing for additional inspection and/or repair instructions and perform applicable
inspection and/or repair.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
27 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 28

5. Inspection Condition 4:
a. Inspection Condition 4.1 - If the latch pin extension is less than 0.84 inches or greater than
0.94 inches:
(1) Replace the latch pin in accordance with FIGURE 7.
(2) Remove the mating cam latch and do a detailed inspection in accordance with FIGURE
8. Address the inspection findings as described in Inspection Condition 1.
(3) Do a HFEC or alternate magnetic particle inspection of cam latch 1 and cam latch 2 for
signs of cracking in accordance with FIGURE 4. Address the inspection findings as
described in Inspection Condition 1.
(4) Rig and check the Main Cargo Door in accordance with FIGURE 10 and FIGURE 11,
and replace all alloy steel cross bolts through the latch pins with CRES cross bolts in
accordance with FIGURE 5. Refer to 757 AMM 52-32-00 Rev 20Sep2008 as an accepted
procedure for MCD rigging.
b. Inspection Condition 4.2 - If the latch pin extension is between 0.89 and 0.84 inches or between
0.91 and 0.94 inches:
(1) Do a detailed inspection of the cam latches and latch pins in accordance with FIGURE
1. Address the inspection findings as described in Inspection Conditions 1 through 3.
(2) Do a HFEC or alternate magnetic particle inspection of cam latch 1 and cam latch 2 for
signs of cracking in accordance with FIGURE 4. Address the inspection findings as
described in Inspection Condition 1.
(3) Rig and check the Main Cargo Door in accordance with FIGURE 10 and FIGURE 11,
and replace all alloy steel cross bolts through the latch pins with CRES cross bolts in
accordance with FIGURE 5. Refer to 757 AMM 52-32-00 Rev 20Sep2008 as an accepted
procedure for MCD rigging.
NOTE: Rigging for the latch pin will require it to be installed properly with an extension
of 0.90 +/- 0.01 inches. A latch pin originally in condition 4.2 with no other
discrepancies may be re-used by clocking the latch pin 90 degrees +/- 10 degrees
from original position and match drilling a new cross bolt hole that provides the
correct latch pin extension. Fill old cross bolt hole in pin with BMS 5-95 sealant
and install pin with BMS 3-27 corrosion inhibiting compound.
6. Inspection Condition 5:
If the inspections reveal no signs of damage, distress, or incorrect rigging as described in Inspection
Conditions 1 through 4:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
28 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 29

a. Do a general visual inspection of the cam latches and latch pins in accordance with FIGURE
9. Address the inspection findings as described in Inspection Condition 1.
b. Do a detailed inspection of the cam latches and latch pins in accordance with FIGURE 1.
Address the inspection findings as described in Inspection Conditions 1 through 5.
c. Do a HFEC or alternate magnetic particle inspection of cam latch 1 and cam latch 2 for signs
of cracking in accordance with FIGURE 4. Address the inspection findings as described in
Inspection Condition 1.
d. Rig and check the Main Cargo Door in accordance with FIGURE 10 and FIGURE 11, and
replace all alloy steel cross bolts through the latch pins with CRES cross bolts in accordance
with FIGURE 5. Refer to 757 AMM 52-32-00 Rev 20Sep2008 as an accepted procedure for
MCD rigging.
7. Post-Rigging Inspections for Airplanes that have completed the Rig and Check of the Main Cargo
Door in accordance with FIGURE 10 and FIGURE 11:
a. Post-Rigging Inspection of all airplanes:
(1) Do a general visual inspection of the cam latches and latch pins in accordance with
FIGURE 9. Address the inspection findings as described in Inspection Condition 1.
(2) Do a detailed inspection of the cam latches and latch pins in accordance with FIGURE
1. Address the inspection findings as described in Inspection Conditions 1 through 3.
(3) Do a HFEC or alternate magnetic particle inspection of cam latch 1 and cam latch 2 for
signs of cracking in accordance with FIGURE 4. Address the inspection findings as
described in Inspection Condition 1.
b. Post-rigging Inspection Condition 1:
If the post-rigging inspections reveal one or more of the following:
– Cracked or broken cam latch(es)
– Cracked or broken latch pin(s)
– Broken latch pin cross bolt(s)
(1) Replace cam latch in accordance with FIGURE 6, replace latch pin in accordance with
FIGURE 7 and replace latch pin cross bolt in accordance with FIGURE 5.
(2) Unless replaced with new parts, do a HFEC or alternate magnetic particle inspection of
cam latch 1 and cam latch 2 for signs of cracks in accordance with FIGURE 4. Address
the inspection findings as described in Inspection Condition 1.
(3) Rig and check the Main Cargo Door in accordance with FIGURE 10 and FIGURE 11.
Refer to 757 AMM 52-32-00 Rev 20Sep2008 as an accepted procedure for MCD rigging.
c. Post-rigging Inspection Condition 2:
If the post-rigging inspections reveal one or more of the following:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
29 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 30

– Local deformation of the cam latch lip
– Flaking of the chrome plating on the cam latch or latch pin
– Wear of the chrome plating down to the base material of the cam latch or latch pin
(1) Contact Boeing and provide a detailed description of the cam latch deformations for
rework instructions and perform the applicable rework.
(2) Replace all cam latches and latch pins with signs of flaking of the chrome plating or wear
down to the base material in accordance with FIGURE 6 and FIGURE 7.
(3) Do a detailed inspection of the cam latches and latch pins in accordance with FIGURE
1. Address the inspection findings as described in Inspection Conditions 1 through 3.
(4) Do a HFEC or alternate magnetic particle inspection of cam latch 1 and cam latch 2 for
signs of cracking in accordance with FIGURE 4. Address the inspection findings as
described in Inspection Condition 1.
(5) Rig and check the Main Cargo Door in accordance with FIGURE 10 and FIGURE 11.
Refer to 757 AMM 52-32-00 Rev 20Sep2008 as an accepted procedure for MCD rigging.
d. Post-rigging Inspection Condition 3:
If the post-rigging inspections reveal one or more of the following:
– Corrosion of the cam latch or latch pin
– Gouges and/or scrapes in the cam latch or latch pin chrome plating or base material
– Deformations of the cam latch or latch pin
– Any other damage not identified in Inspection Conditions 1 and 2.
(1) Contact Boeing and provide a detailed description of the inspection findings (and
photographs, if possible).
(2) Contact Boeing for additional inspection and/or repair instructions and perform applicable
inspection and/or repair.
8. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
30 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 31 (OCR)

BOEING SERVICE BULLETIN 757-52A0091
ALERT  ALERT
(6) C  (5) C
FIGURE 1: MAIN CARGO DOOR - CAM LATCHES AND LATCH PINS INSPECTION
(SHEET 1 OF 3)
Original Issue: March 09, 2010
757-52A0091
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  31 of 55

### Page 32 (OCR)

BOEING SERVICE BULLETIN 757-52A0091
ALERT  ALERT
LATCH PIN
(8 LOCATIONS)
(9)
POTENTIAL
CRACKING AREA
CHROME WEAR
THROUGH
'GOUGES
POTENTIAL
CRACKING AREAS
CAM LATCH  CHROME WEAR
THROUGH
GOUGES
PROTRUDING LIP ON
EDGE OF CAM HEAD
1673612
FIGURE 1: MAIN CARGO DOOR - CAM LATCHES AND LATCH PINS INSPECTION
(SHEET 2 OF 3)
Original Issue: March 09, 2010
757-52A0091
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  32 of 55

### Page 33

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Detailed inspection of the
cam latch.(a)
169-23438-2Cam Latch 1Inspect1
Detailed inspection of the
cam latch.(a) (b)
1143N8060-1Cam Latch 2Inspect2
Detailed inspection of the
cam latch.(a) (b)
1143N8027-2Cam Latch 3Inspect3
Detailed inspection of the
cam latch.(a)
169-23439-3Cam Latch 4Inspect4
Detailed inspection of the
cam latch.(a)
169-23439-4Cam Latch 5Inspect5
Detailed inspection of the
cam latch.(a) (b)
1143N8027-1Cam Latch 6Inspect6
Detailed inspection of the
cam latch.(a) (b)
1143N8060-2Cam Latch 7Inspect7
Detailed inspection of the
cam latch.(a)
169-23438-1Cam Latch 8Inspect8
Detailed inspection of the
latch pin.(a)
86-83137-2Latch PinInspect9
(a) Look for signs of damage, distress or incorrect rigging. Some examples are: broken parts, cracks, defor-
mations, flaking of the chrome plating, wear of the chrome plating down to the base material, corrosion,
chips, gouges etc.
(b) Cam Latches 2, 3, 6 and 7 are not chromed, therefore chrome flaking and chrome wear through cannot
be assessed at these locations. Check for excessive wear.
FIGURE 1: MAIN CARGO DOOR - CAM LATCHES AND LATCH PINS INSPECTION
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
33 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 34 (OCR)

BOEING SERVICE BULLETIN 757-52A0091
ALERT  ALERT
MAIN CARGO DOORWAY
LOWER SILL
LATCH PIN FITTING
ASSEMBLY
(8 LOCATIONS)
LATCH PIN FITTING ASSEMBLY  O BOLT
(SHOWN WITH OPTIONAL CLIP
ASSEMBLY INSTALLED)
1676653
FIGURE 2: MAIN CARGO DOOR - LATCH PIN CROSS BOLT TORQUE MEASUREMENT
(SHEET 1 OF 2)
Original Issue: March 09, 2010
757-52A0091
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  34 of 55

### Page 35

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a)8NAS6603-24BoltTorque1
(a) Make sure the cross bolt is capable of reacting a 15 pound-inch, +/- 1 pound-inch, torque from the head
side of the bolt and also the nut side if no nutplate is used. The 15 pound-inch, +/- 1 pound-inch, torque
value is approximately one-half of the installation torque and is used to give an indication of the integrity
of the cross bolt.
FIGURE 2: MAIN CARGO DOOR - LATCH PIN CROSS BOLT TORQUE MEASUREMENT
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
35 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 36 (OCR)

BOEING SERVICE BULLETIN 757-52A0091
ALERT  ALERT
MAIN CARGO DOORWAY
LOWER SILL
LATCH PIN FITTING
ASSEMBLY
(8 LOCATIONS)
0.91
0.89
LATCH PIN FITTING ASSEMBLY
(SHOWN WITH OPTIONAL CLIP
ASSEMBLY INSTALLED)
FIGURE 3: MAIN CARGO DOOR - LATCH PIN EXTENSION MEASUREMENT
(SHEET 1 OF 2)
Original Issue: March 09, 2010
BOEING PROPRIETARY -  757-52A0091
Copyright © Unpublished Work - See page 1 for details.  36 of 55

### Page 37

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Make sure the latch
pin extends out 0.90
inch +/- 0.01 inch
from the wear plate.
86-83137-2Latch PinMeasure1
FIGURE 3: MAIN CARGO DOOR - LATCH PIN EXTENSION MEASUREMENT
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
37 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 38 (OCR)

BOEING SERVICE BULLETIN 757-52A0091
ALERT  ALERT
4) A
A E€
WD
CAM LATCH
(3) INSPECTION AREA
1677155
FIGURE 4: MAIN CARGO DOOR - CAM LATCH 1 AND CAM LATCH 2 INSPECTION
(SHEET 1 OF 2)
Original Issue: March 09, 2010
757-52A0091
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  38 of 55

### Page 39

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
169-23438-2Cam Latch 1Remove / Keep1
1143N8060-1Cam Latch 2Remove / Keep2
Do a HFEC inspection of cam latch 1 for signs
of cracks in accordance with 757 NDT Part
6, 51-00-12 or 51-00-21.(a) (b) (c)
169-23438-2Cam Latch 1Inspect3
Do a HFEC inspection of cam latch 2 for signs
of cracks in accordance with 757 NDT Part
6, 51-00-12 or 51-00-21.(a) (b) (c)
1143N8060-1Cam Latch 2Inspect
169-23438-2Cam Latch 1Install (Kept)4
1143N8060-1Cam Latch 2Install (Kept)5
(a) Use a 0.080 inch diameter or smaller HFEC probe. Set the HFEC instrument to operate between 50 KHz
and 75 KHz. If HFEC method indicates a crack, confirm a crack using magnetic particle inspection. Refer
to SOPM 20-20-01 as an accepted procedure.
(b) An optional magnetic particle inspection can be used. Refer to SOPM 20-20-01 as an accepted procedure.
(c) HFEC indications can be confirmed using the magnetic particle inspection. If crack indications are found
with HFEC and could not be confirmed with magnetic particle inspection, the HFEC crack indication is a
non relevant indication due to chrome cracking.
FIGURE 4: MAIN CARGO DOOR - CAM LATCH 1 AND CAM LATCH 2 INSPECTION
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
39 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 40 (OCR)

BOEING SERVICE BULLETIN 757-52A0091
ALERT  ALERT
MAIN CARGO DOORWAY
LOWER SILL
LATCH PIN FITTING
ASSEMBLY
(8 LOCATIONS)
LATCH PIN FITTING ASSEMBLY  OE BOLT
(SHOWN WITH OPTIONAL CLIP
ASSEMBLY INSTALLED)
1677164
FIGURE 5: MAIN CARGO DOOR - LATCH PIN CROSS BOLT REPLACEMENT
(SHEET 1 OF 2)
Original Issue: March 09, 2010
757-52A0091
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  40 of 55

### Page 41

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
-8NAS6603-24 (BACB30NF3-22
optional)
BoltRemove1
Install with BMS 3-27 corro-
sion inhibiting material
8BACB30LM3-24
(BACB30LM3-22 optional)
BoltInstall (New)2
FIGURE 5: MAIN CARGO DOOR - LATCH PIN CROSS BOLT REPLACEMENT
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
41 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 42 (OCR)

BOEING SERVICE BULLETIN 757-52A0091
ALERT  ALERT
MAIN CARGO DOOR
I CAM LATCF  8 LOCATIONS) A
1677197
FIGURE 6: MAIN CARGO DOOR - CAM LATCH REPLACEMENT
(SHEET 1 OF 3)
Original Issue: March 09, 2010
BOEING PROPRIETARY -  757-52A0091
Copyright © Unpublished Work - See page 1 for details.  42 of 55

### Page 43 (OCR)

BOEING SERVICE BULLETIN 757-52A0091
ALERT  ALERT
CAM LATCH
CROSS BOLT -
HOLES
Đ-  • EXISTING
TOOLING
HOLE
1846646
FIGURE 6: MAIN CARGO DOOR - CAM LATCH REPLACEMENT
(SHEET 2 OF 3)
Original Issue: March 09, 2010
BOEING PROPRIETARY -  757-52A0091
Copyright © Unpublished Work - See page 1 for details.  43 of 55

### Page 44

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Gusset must be re-
moved to allow re-
moval of cam latch
number 4.
--Cam LatchRemove1
(a) (b)--Cam LatchInstall (New)2
(a) Use the original removed cam latch as a pattern/template to locate new cross bolt holes. Match hole an-
gularity from existing cam latch.
(b) Cam latch number 2 and cam latch number 7 only have two cross bolt holes.
FIGURE 6: MAIN CARGO DOOR - CAM LATCH REPLACEMENT
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
44 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 45 (OCR)

BOEING SERVICE BULLETIN 757-52A0091
ALERT  ALERT
MAIN CARGO DOORWAY
LOWER SILL
LATCH PIN FITTING
ASSEMBLY
(8 LOCATIONS)
LATCH PIN 1
LATCH PIN FITTING ASSEMBLY
(SHOWN WITH OPTIONAL CLIP
ASSEMBLY INSTALLED)
1677201
FIGURE 7: MAIN CARGO DOOR - LATCH PIN REPLACEMENT
(SHEET 1 OF 2)
Original Issue: March 09, 2010
757-52A0091
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  45 of 55

### Page 46

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
--6-83137-2Latch PinRemove1
Install latch pin wet with BMS 3-27
corrosion inhibiting material on
faying surfaces.
-6-83137-2Latch PinInstall (New)2
FIGURE 7: MAIN CARGO DOOR - LATCH PIN REPLACEMENT
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
46 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 47 (OCR)

BOEING SERVICE BULLETIN 757-52A0091
ALERT  ALERT
03 В
3) В
WD
1З В
1677216
FIGURE 8: MAIN CARGO DOOR - CAM LATCH REMOVAL AND INSPECTION
(SHEET 1 OF 2)
Original Issue: March 09, 2010
757-52A0091
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  47 of 55

### Page 48

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b)--Cam LatchRemove1
Detailed inspection
of the cam latch for
cracks.
--Cam LatchInspect2
(a)--Cam LatchInstall (Kept)3
(a) It is important to identify the Cam Latch part locations to ensure the parts are re-installed in correct locations.
Cam latches installed incorrectly may seriously compromise proper door operation.
(b) Gusset must be removed to allow removal of cam latch number 4.
FIGURE 8: MAIN CARGO DOOR - CAM LATCH REMOVAL AND INSPECTION
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
48 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 49 (OCR)

BOEING SERVICE BULLETIN 757-52A0091
ALERT  ALERT
MAIN CARGO DOORWAY
LOWER SILL
(2) LATCH PIN
(8 LOCATIONS)
1 CAM LATCH
(8 LOCATIONS)
1677221
FIGURE 9: MAIN CARGO DOOR - CAM LATCHES AND LATCH PINS INSPECTION
(SHEET 1 OF 2)
Original Issue: March 09, 2010
BOEING PROPRIETARY -  757-52A0091
Copyright © Unpublished Work - See page 1 for details.  49 of 55

### Page 50

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
General visual in-
spection of the cam
latch.(a)
169-23438-2Cam Latch 1Inspect1
General visual in-
spection of the cam
latch.(a)
1143N8060-1Cam Latch 2Inspect
General visual in-
spection of the cam
latch.(a)
1143N8027-2Cam Latch 3Inspect
General visual in-
spection of the cam
latch.(a)
169-23439-3Cam Latch 4Inspect
General visual in-
spection of the cam
latch.(a)
169-23439-4Cam Latch 5Inspect
General visual in-
spection of the cam
latch.(a)
1143N8027-1Cam Latch 6Inspect
General visual in-
spection of the cam
latch.(a)
1143N8060-2Cam Latch 7Inspect
General visual in-
spection of the cam
latch.(a)
169-23438-1Cam Latch 8Inspect
General visual in-
spection of the latch
pins.(a)
86-83137-2Latch PinInspect2
(a) Inspect for broken, cracked, missing or migrated parts.
FIGURE 9: MAIN CARGO DOOR - CAM LATCHES AND LATCH PINS INSPECTION
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
50 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 51 (OCR)

BOEING SERVICE BULLETIN 757-52A0091
ALERT  ALERT
D CENTER LATCH  MECHANISM
FORWARD
•  LATCH
MECHANISM
AFT LATCH
MECHANISM
NO. 1
NO. 2
NO. 4 B  NO. 3 B
NO. 6 B  NO. 5
NO. 8 B  NO.7 B
1916499
FIGURE 10: MAIN CARGO DOOR - CAM LATCH AND LATCH PIN RIGGING
(SHEET 1 OF 3)
Original Issue: March 09, 2010
757-52A0091
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  51 of 55

### Page 52 (OCR)

BOEING SERVICE BULLETIN 757-52A0091
ALERT  ALERT
CAM LATCH  AT
TYPICAL
B
CAM LATCH AXIAL  CENTERLINE  LATCH PIN AXIAL  CENTERLINE
CAM LATCH (1)  U LATCH PIN
END VIEW
A-A
- 0.025
MAX
).025
0.025
MAX
0.025
MAX
CAM LATCH
C  1915618
FIGURE 10: MAIN CARGO DOOR - CAM LATCH AND LATCH PIN RIGGING
(SHEET 2 OF 3)
Original Issue: March 09, 2010
BOEING PROPRIETARY -  757-52A0091
Copyright © Unpublished Work - See page 1 for details.  52 of 55

### Page 53

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b)--Cam LatchMeasure1
(a) (b)-6-83137-2Latch PinMeasure
(c)--Latch Pin FittingMeasure
(a) During rigging procedure the latch pin is not to contact the cam latch in any direction.
(b) Wrap a single layer of 0.002 inch thick shim stock around latch pins 1 and 8. Use thin tape to keep shim
in place. With latch pins 1 and 8 engaging their respective cam latches, and with latch pins 2 through 7
not contacting their respective cam latches in any direction, adjust if required, latch pin fittings 2 through
7 such that latch pins 2 through 7 axial centerlines and their respective cam latch axial centerlines are
within the tolerance shown.
(c) Adjust latch pin fittings by moving fitting on serrations and by adjusting shim thickness. On the two forward
and two aft cam latches the Latch Pin Fitting/Cam Latch gap is 0.14 +/- 0.01 inch. On the four center cam
latches the Latch Pin Fitting/Cam Latch gap is 0.08 +/- 0.01 inch. Make sure the maximum allowed shim
thickness of 0.20 inch is not exceeded.
FIGURE 10: MAIN CARGO DOOR - CAM LATCH AND LATCH PIN RIGGING
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
53 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

### Page 54 (OCR)

BOEING SERVICE BULLETIN 757-52A0091
ALERT  ALERT
-0.20  + -0.20  +0.10
+0.10  1 +0.20  -0.20
MAIN CARGO DOOR
‚DOOR
SCALE
INBD
FUSELAGE
A-A  1915599
NOTE: THIS VIEW SHOWS A NEGATIVE FLUSHNESS
FIGURE 11: MAIN CARGO DOOR - MAIN CARGO DOOR EDGE FLUSHNESS MEASUREMENT
(SHEET 1 OF 2)
Original Issue: March 09, 2010
757-52A0091
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  54 of 55

### Page 55

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Hold scale 90 degrees to door edge.
Make sure the MCD lower edge and
lower corner flushness are within
the tolerance shown.
--Main Cargo DoorMeasure1
FIGURE 11: MAIN CARGO DOOR - MAIN CARGO DOOR EDGE FLUSHNESS MEASUREMENT
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 09, 2010
757-52A0091
55 of 55
BOEING SERVICE BULLETIN 757-52A0091
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
