# Boeing Alert Service Bulletin 757-53A0104: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2018-0163; AD 2018-18-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 757-53A0104](https://openairdocs.org/service-documents/boeing/757-53a0104.md)
- Title as filed: SB-757-53A0104
- Pages: 141
- PDF: https://openairdocs.org/files/sha256/e7/bd/e7bd3719c191aa14cda94c4f182810a4a132540b3512ac3ea11673cde5e61522
- Page: https://openairdocs.org/service-documents/boeing/757-53a0104/file/e7bd3719c191

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
757
Service Bulletin
ALERT
Number: 757-53A0104
Original Issue: November 06, 2017
ATA System: 5330 5340 5360
SUBJECT: FUSELAGE - Section 43, Section 44, and Section 46 - Fuselage Skin Lap Splice
Inspection
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2017 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: November 06, 2017
757-53A0104
1 of 141
4.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
2 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
S u m m a r y  ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A . E f f e c t i v i t y  ................................................ 9
1. Airplanes ............................................. 9
2 . S p a r e s  A f f e c t e d  ........................................ 1 3
B. Concurrent Requirements ...................................... 1 3
C. Reason ................................................ 1 3
D. Description .............................................. 1 4
E. Compliance .............................................. 1 5
F . A p p r o v a l  ............................................... 5 1
G. Manpower .............................................. 5 2
H. Weight and Balance Changes .................................... 5 5
I. Electrical Load Data ......................................... 5 5
J . R e f e r e n c e s  .............................................. 5 5
1. Existing Data: ......................................... 5 5
2. Data Supplied with this Service Bulletin: ........................... 5 5
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 5 6
K. Publications Affected ........................................ 5 6
L. Interchangeability and Intermixability of Parts ........................... 5 6
M. Software Accomplishment Summary ................................ 5 6
2. MATERIAL INFORMATION ........................................ 5 7
A. Material - Price and Availability ................................... 5 7
B. Industry Support Information .................................... 5 7
C. Parts Necessary for Each Airplane ................................. 5 7
1 . K i t s / P a r t s  ............................................ 5 7
2. Parts and Materials Supplied by the Operator ........................ 5 7
3. Parts Modified and Reidentified ................................ 5 7
4. Parts Removed and Not Replaced .............................. 5 7
D. Parts Necessary to Change Spares ................................. 5 7
E. Special Tooling - Price and Availability ............................... 5 7
F. Special Tooling Necessary to do this Service Bulletin ....................... 5 7
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 5 9
A. GENERAL INFORMATION ..................................... 5 9
B. WORK INSTRUCTIONS ....................................... 6 1
FIGURE 1: EXTERNAL HFEC AND DETAILED INSPECTION OF THE OUTER SKIN UPPER LAP ROW
[Group 1] ............................................ 6 7
FIGURE 2: EXTERNAL DFEC INSPECTION OF THE INNER SKIN LOWER LAP ROW AND GENERAL
VISUAL INSPECTION [Group 1] ............................... 7 0
FIGURE 3: INTERNAL HFEC INSPECTION OF THE INNER SKIN LOWER LAP ROW [Group 1] . . 73
FIGURE 4: EXTERNAL HFEC AND DETAILED INSPECTION OF THE OUTER SKIN UPPER LAP ROW
[Group 2] ............................................ 7 6
FIGURE 5: EXTERNAL DFEC INSPECTION OF THE INNER SKIN LOWER LAP ROW AND GENERAL
VISUAL INSPECTION [Group 2] ............................... 7 9
FIGURE 6: INTERNAL HFEC INSPECTION OF THE INNER SKIN LOWER LAP ROW [Group 2] . . 82
FIGURE 7: EXTERNAL HFEC AND DETAILED INSPECTION OF THE OUTER SKIN UPPER LAP ROW
[Group 3] ............................................ 8 5
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
3 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 4

FIGURE 8: EXTERNAL DFEC INSPECTION OF THE INNER SKIN LOWER LAP ROW AND GENERAL
VISUAL INSPECTION [Group 3] ............................... 8 8
FIGURE 9: INTERNAL HFEC INSPECTION OF THE INNER SKIN LOWER LAP ROW [Group 3] . . 91
FIGURE 10: EXTERNAL HFEC AND DETAILED INSPECTION OF THE OUTER SKIN UPPER LAP ROW
[Group 4] ............................................ 9 4
FIGURE 11: EXTERNAL DFEC INSPECTION OF THE INNER SKIN LOWER LAP ROW AND GENERAL
VISUAL INSPECTION [Group 4] ............................... 9 7
FIGURE 12: INTERNAL HFEC INSPECTION OF THE INNER SKIN LOWER LAP ROW [Group 4] . . 100
FIGURE 13: EXTERNAL HFEC AND DETAILED INSPECTION OF THE OUTER SKIN UPPER LAP ROW
[Group 5] ............................................ 1 0 3
FIGURE 14: EXTERNAL DFEC INSPECTION OF THE INNER SKIN LOWER LAP ROW AND GENERAL
VISUAL INSPECTION [Group 5] ............................... 1 0 6
FIGURE 15: INTERNAL HFEC INSPECTION OF THE INNER SKIN LOWER LAP ROW [Group 5] . . 109
FIGURE 16: EXTERNAL HFEC AND DETAILED INSPECTION OF THE OUTER SKIN UPPER LAP ROW
[Group 6] ............................................ 1 1 2
FIGURE 17: EXTERNAL DFEC INSPECTION OF THE INNER SKIN LOWER LAP ROW AND GENERAL
VISUAL INSPECTION [Group 6] ............................... 1 1 5
FIGURE 18: INTERNAL HFEC INSPECTION OF THE INNER SKIN LOWER LAP ROW [Group 6] . . 119
FIGURE 19: EXTERNAL HFEC AND DETAILED INSPECTION OF THE OUTER SKIN UPPER LAP ROW
[Group 7] ............................................ 1 2 3
FIGURE 20: EXTERNAL DFEC INSPECTION OF THE INNER SKIN LOWER LAP ROW AND GENERAL
VISUAL INSPECTION [Group 7] ............................... 1 2 6
FIGURE 21: INTERNAL HFEC INSPECTION OF THE INNER SKIN LOWER LAP ROW [Group 7] . . 129
FIGURE 22: EXTERNAL HFEC AND DETAILED INSPECTION OF THE OUTER SKIN UPPER LAP ROW
[Group 8] ............................................ 1 3 2
FIGURE 23: EXTERNAL DFEC INSPECTION OF THE INNER SKIN LOWER LAP ROW AND GENERAL
VISUAL INSPECTION [Group 8] ............................... 1 3 5
FIGURE 24: INTERNAL HFEC INSPECTION OF THE INNER SKIN LOWER LAP ROW [Group 8] . . 137
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE: TABLE 1: FUSELAGE SKIN
LONGITUDINAL LAP SPLICE INSPECTION ........................ 1 3 9
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
4 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 5

Commercial 
Airplanes
757
Service Bulletin
ALERT
SummaryNumber: 757-53A0104Original Issue: November 06, 2017
ATA System: 5330 5340 5360
SUBJECT: FUSELAGE - Section 43, Section 44, and Section 46 - Fuselage Skin Lap Splice
Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
The fuselage skin longitudinal lap splices on 757 model airplanes have been determined to be susceptible to
Widespread Fatigue Damage (WFD). No cracking was found on the fatigue test article, but WFD analysis has
identified the need for more frequent repeat inspections. Existing Maintenance Planning Data (MPD) inspections
are not sufficient to detect widespread fatigue cracks before they become critical. Currently, there have been
no reports of WFD cracking on airplanes in service. Inspections will mitigate a safety issue, allowing continued
operation to the Limit of Validity (LOV). Accomplishment of the inspections in this service bulletin will make sure
that any crack in the fuselage skin longitudinal lap splices is found. Continued operation with any undetected
crack in the fuselage skin longitudinal lap splices could adversely affect the structural integrity of the airplane.
The fuselage skin longitudinal lap splices have been determined to be structure that is susceptible to Widespread
Fatigue Damage (WFD).
Boeing Fleet Team Digest (FTD) 757 FTD 53-15006 is related to this service bulletin.
Boeing Service Related Problem (SRP) 757-SRP-53-0487 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
5 of 141

### Page 6

ReferenceAffectedPlanning Data
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
NoOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION
Do visual and eddy current inspections of the fuselage skin longitudinal lap splices in Section 43, Section 44,
and Section 46, for any crack and any protruding head fastener.
If no crack is found and no protruding head fastener is found, repeat the inspections at the interval specified in
Paragraph 1.E., Compliance.
If any crack is found or any protruding head fastener found, contact The Boeing Company for crack repair
instructions or alternate inspection instructions for the protruding head fastener and do the repair or inspection
and any corrective actions as applicable.
EFFECTIVITY
All 757-200/-200CB/-200PF/-300 Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of affected
airplane(s).
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspections given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
6 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 7

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
7 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 8

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
8 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
757
Service Bulletin
ALERT
Number: 757-53A0104
Original Issue: November 06, 2017
ATA System: 5330 5340 5360
SUBJECT: FUSELAGE - Section 43, Section 44, and Section 46 - Fuselage Skin Lap Splice
Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is applicable to all 757-200/-200CB/-200PF/-300 Airplanes, line numbers
1-1050 in 8 Group(s). The Variable Numbers and Group Information for the applicable airplanes
is given below.
Refer to Service Bulletin Index D624N001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is for the airplanes shown below.
DESCRIPTIONCONFIGURATIONGROUP
757-200 passenger airplanes with 2 lower cargo doors with no Aft
Potable Water Service Panel
-1
757-200 passenger airplanes with 2 lower cargo doors with Aft
Potable Water Service Panel
-2
757-200 passenger airplanes with 2 lower cargo doors with Aft
Potable Water Service Panel, and Door 4 lavatory service panel
(166AR Access Door)
-3
757-200 passenger airplanes with 3 lower cargo doors-4
757-200CB combi airplanes-5
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
9 of 141

### Page 10

DESCRIPTIONCONFIGURATIONGROUP
757-200PF package freighter airplanes-6
757-200 special freighter airplanes-7
757-300 airplanes-8
Airplane Models:
757-200, 757-200CB, 757-200PF, 757-300
GroupVariable Number
1NA001 - NA028
1NA191 - NA199
7NA201 - NA204
4NA205
7NA206 - NA213
4NA214
7NA215 - NA236
1NA237 - NA239
1NA301 - NA305
4NA341 - NA352
4NA391 - NA399
1NA401 - NA408
1NA441 - NA447
3NA501 - NA586
3NB001 - NB004
1NB021 - NB023
1NB036 - NB041
1NB051 - NB053
1NB061 - NB073
1NB079
1NB131 - NB148
1NB161 - NB162
1NB166 - NB168
1NB201 - NB204
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
10 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 11

GroupVariable Number
1NB221 - NB228
1NB230
1NB236
1NB239
1NB261 - NB267
1NB291 - NB299
1NB301 - NB302
1NB311 - NB312
1NB321 - NB331
1NB421 - NB438
1NB446
1NB451 - NB454
1NB501 - NB523
1NB561
1NB571
1NB581 - NB583
1NC001 - NC033
1NC041 - NC042
1NC051 - NC052
1NC056 - NC062
1NC066 - NC084
1NC091 - NC094
1NC151
1NC161
6NC901 - NC951
6NC971 - NC974
3ND001 - ND007
3ND011 - ND059
3ND111 - ND113
3ND161 - ND199
3ND201 - ND203
3ND221 - ND225
3ND241 - ND248
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
11 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 12

GroupVariable Number
3ND301 - ND322
3ND401
3ND891
5ND895
3NE001 - NE008
3NE011 - NE088
3NE091 - NE094
3NE141 - NE150
3NE161 - NE177
3NE201 - NE204
3NE301 - NE302
3NE311 - NE325
2NJ001 - NJ004
2NJ031 - NJ032
2NJ551 - NJ555
8NL001 - NL002
8NL006 - NL017
8NL101 - NL109
8NL141
8NL601 - NL616
2NN001 - NN002
2NN051 - NN052
1NP901 - NP904
6NS601 - NS616
6NT001 - NT009
1NT201 - NT202
1NT231 - NT234
1NT237 - NT240
1NT242
1NT245 - NT248
1NT281 - NT289
1NT341 - NT347
1NT351 - NT360
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
12 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 13

GroupVariable Number
1NT371 - NT373
1NT375 - NT379
1NT381 - NT386
1NT401 - NT409
1NT411 - NT412
1NT426 - NT427
1NT431 - NT432
1NT436 - NT438
1NT441 - NT442
1NT446
3NT701 - NT769
3NT791 - NT796
3NT861 - NT862
3NT881 - NT885
3NT901 - NT916
3NT971 - NT985
3NU031 - NU038
8NU701 - NU705
8NU721 - NU728
8NU731 - NU732
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
The fuselage skin longitudinal lap splices on 757 model airplanes have been determined to be susceptible
to Widespread Fatigue Damage (WFD). No cracking was found on the fatigue test article, but WFD
analysis has identified the need for more frequent repeat inspections. Existing Maintenance Planning
Data (MPD) inspections are not sufficient to detect widespread fatigue cracks before they become
critical. Currently, there have been no reports of WFD cracking on airplanes in service. Inspections will
mitigate a safety issue, allowing continued operation to the Limit of Validity (LOV). Accomplishment of
the inspections in this service bulletin will make sure that any crack in the fuselage skin longitudinal
lap splices is found. Continued operation with any undetected crack in the fuselage skin longitudinal
lap splices could adversely affect the structural integrity of the airplane.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
13 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 14

Boeing Fleet Team Digest (FTD) 757 FTD 53-15006 is related to this service bulletin.
Boeing Service Related Problem (SRP) 757-SRP-53-0487 is related to this service bulletin.
The fuselage skin longitudinal lap splices have been determined to be structure that is susceptible to
Widespread Fatigue Damage (WFD).
D. Description
Do visual and eddy current inspections of the fuselage skin longitudinal lap splices in Section 43,
Section 44, and Section 46, for any crack and any protruding head fastener.
If no crack is found and no protruding head fastener is found, repeat the inspections at the interval
specified in Paragraph 1.E., Compliance.
If any crack is found or any protruding head fastener found, contact The Boeing Company for crack
repair instructions or alternate inspection instructions for the protruding head fastener and do the repair
or inspection and any corrective actions as applicable.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1-4, 7:
Affected Maintenance Zones
ZoneModel
119, 121, 122, 123, 124, 153, 154, 155, 156,
161, 162, 163, 164, 165, 166, 191, 192, 193,
194, 195, 196, 231, 232, 233, 234, 243, 244,
251, 252, 253, 254
757-200
Group 5:
Affected Maintenance Zones
ZoneModel
119, 121, 122, 123, 124, 153, 154, 155, 156,
161, 162, 163, 164, 165, 166, 191, 192, 193,
194, 195, 196, 231, 232, 233, 234, 243, 244,
251, 252, 253, 254
757-200CB
Group 6:
Affected Maintenance Zones
ZoneModel
119, 121, 122, 123, 124, 153, 154, 155, 156,
161, 162, 163, 164, 165, 166, 191, 192, 193,
194, 195, 196, 231, 232, 233, 234, 241, 242,
251, 252, 253, 254
757-200PF
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
14 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 15

Group 8:
Affected Maintenance Zones
ZoneModel
119, 121, 122, 123, 124, 153, 154, 155, 156,
161, 162, 163, 164, 165, 166, 191, 192, 193,
194, 195, 196, 231, 232, 233, 234, 251, 252,
253, 254
757-300
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Do the required actions in accordance with Paragraph 3. Accomplishment Instructions.
A logic diagram showing compliance tasks and compliance times is included as an aid in APPENDIX
A.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Table 1: FUSELAGE SKIN LONGITUDINAL LAP SPLICE INSPECTION
Repeat Interval (Not to
Exceed)
Compliance Time (Whichever Oc-
curs Later)
ActionCondition
-Within 3,000 flight
cycles after the
original issue date
of this service bul-
letin.
Before 50,000
total flight cy-
cles.
Do PART 1: UPPER FAS-
TENER ROW EDDY CUR-
RENT OR DETAILED IN-
SPECTION for any crack.
(a)(b)
All airplanes
AND
Do PART 2: LOWER FAS-
TENER ROW EDDY CUR-
RENT INSPECTION AND
GENERAL VISUAL INSPEC-
TION, for any crack and any
protruding head fastener.
(a)(b)(c)(d)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
15 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 16

Table 1: FUSELAGE SKIN LONGITUDINAL LAP SPLICE INSPECTION
Repeat Interval (Not to
Exceed)
Compliance Time (Whichever Oc-
curs Later)
ActionCondition
In accordance with the re-
peat interval specified in
the applicable group and
table listed below:
--Repeat PART 1: UPPER
FASTENER ROW EDDY
CURRENT OR DETAILED
INSPECTION for any crack.
(a)(b)
CONDITION 1:
NO CRACK
FOUND during
PART 1 inspec-
tions Table 2Group 1
Table 4Group 2
Table 6Group 3
Table 8Group 4
Table 10Group 5
Table 12Group 6
Table 14Group 7
Table 16Group 8
--Before further
flight.
ACTION 1: Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 2:
ANY CRACK
FOUND during
PART 1 inspec-
tions In accordance with the re-
peat interval specified in
the applicable group and
table listed below:
--ACTION 2: Repeat PART 1:
UPPER FASTENER ROW
EDDY CURRENT OR DE-
TAILED INSPECTION for
any crack. (a)(b) Table 2Group 1
Table 4Group 2
Table 6Group 3
Table 8Group 4
Table 10Group 5
Table 12Group 6
Table 14Group 7
Table 16Group 8
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
16 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 17

Table 1: FUSELAGE SKIN LONGITUDINAL LAP SPLICE INSPECTION
Repeat Interval (Not to
Exceed)
Compliance Time (Whichever Oc-
curs Later)
ActionCondition
In accordance with the re-
peat interval specified in
the applicable group and
table listed below:
--Repeat PART 2: LOWER
FASTENER ROW EDDY
CURRENT INSPECTION
AND GENERAL VISUAL IN-
SPECTION for any crack
and any protruding head
fastener. (a)(b)(c)(d)
CONDITION 3:
NO CRACK
FOUND AND
NO PROTRUD-
ING HEAD
FASTENER
FOUND during
PART 2 inspec-
tions
Table 3Group 1
Table 5Group 2
Table 7Group 3
Table 9Group 4
Table 11Group 5
Table 13Group 6
Table 15Group 7
Table 17Group 8
--Before further
flight.
ACTION 1: Contact The
Boeing Company for crack
repair instructions or alter-
nate inspection instructions
for the protruding head fas-
tener and do the repair or
inspection and any correc-
tive actions as applicable.
CONDITION 4:
ANY CRACK
FOUND OR
ANY PRO-
TRUDING
HEAD FAS-
TENER
FOUND during
PART 2 inspec-
tions In accordance with the re-peat interval specified in
the applicable group and
table listed below:
--ACTION 2: Repeat PART 2:
LOWER FASTENER ROW
EDDY CURRENT INSPEC-
TION AND GENERAL VISU-
AL INSPECTION for any
crack and any protruding
head fastener. (a)(b)(c)(d)
Table 3Group 1
Table 5Group 2
Table 7Group 3
Table 9Group 4
Table 11Group 5
Table 13Group 6
Table 15Group 7
Table 17Group 8
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
17 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 18

Table 1: FUSELAGE SKIN LONGITUDINAL LAP SPLICE INSPECTION
Repeat Interval (Not to
Exceed)
Compliance Time (Whichever Oc-
curs Later)
ActionCondition
(a) It is not necessary to do inspections in accordance with this service bulletin in areas where existing repairs,
approved by the Boeing ODA via FAA 8100-9 form or FAA 8110-3 form, cover the affected inspection
areas, provided the outermost repair doubler extends a minimum of three rows of fasteners above and
below the original group of lap splice fasteners. Damage Tolerance Inspection instructions specified for
existing repairs must continue. Inspections outside of the repair boundaries must continue in accordance
with this service bulletin.
(b) It is not necessary to do inspections in accordance with this service bulletin in areas where external wing
to body fairing support brackets are attached over the lap splice at frame locations.
(c) For internal inspection areas hidden by tear straps or shear ties at frame locations where PART 2, OPTION
2 Internal High Frequency Eddy Current (HFEC) inspection cannot be accomplished, PART 2, OPTION
1 External Dual Frequency Eddy Current (DFEC) inspection, is the only acceptable inspection method at
those frames.
(d) For internal inspection areas with no access between frames where PART 2, OPTION 2 Internal High
Frequency Eddy Current (HFEC) inspection cannot be accomplished, PART 2, OPTION 1 External Dual
Frequency Eddy Current (DFEC) inspection, is the only acceptable inspection method for the entire lap
splice between those frames.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
18 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 19

Group 1:
Table 2: Upper Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 2) External Detailed In-
spection
(OPTION 1) External High Fre-
quency Eddy Current (HFEC) In-
spection
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)Repeat Interval (Not to Exceed)
-12,000 Flight Cycles (FC)440 to 640,S-4LUpper
680 to 820,
1300 to 1440,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC640 to 680,S-4L
1600 to 1620
-12,000 FC440 to 640,S-4R
680 to 820,
1300 to 1440,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC640 to 680,S-4R
1600 to 1620
-12,000 FC440 to 640,S-10L
800 to 860,
1480 to 1600
3,000 FC12,000 FC640 to 660,S-10L
1400 to 1480,
1600 to 1620
-12,000 FC440 to 640,S-10R
800 to 860,
1480 to 1600
3,000 FC12,000 FC640 to 660,S-10R
1400 to 1480,
1600 to 1620
-12,000 FC1240 to 1300,S-20L
1460 to 1620
3,000 FC12,000 FC1360 to 1460,S-20L
1700 to 1720
-12,000 FC1460 to 1620S-20R
3,000 FC12,000 FC1700 to 1720S-20R
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
19 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 20

Group 1:
Table 2: Upper Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 2) External Detailed In-
spection
(OPTION 1) External High Fre-
quency Eddy Current (HFEC) In-
spection
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)Repeat Interval (Not to Exceed)
-12,000 FC540 to 780,S-26LUpper
(cont.) 1360 to 1620,
1660 to 1720
3,000 FC12,000 FC1620 to 1660S-26L
-12,000 FC680 to 780,S-26R
1460 to 1620,
1660 to 1720
3,000 FC12,000 FC660 to 680,S-26R
1620 to 1660
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
20 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 21

Group 1:
Table 3: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) Inspec-
tion
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) Inspec-
tion
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
9,000 Flight Cycles (FC)440 to 640,S-4LLower
1340 to 1440,
1480 to 1600
12,000 FC640 to 660,S-4L
760 to 780,
800 to 900,
1160 to 1180,
1220 to 1340,
1440 to 1460,
1600 to 1620
9,000 FC440 to 640,S-4R
1340 to 1440,
1480 to 1600
12,000 FC640 to 660,S-4R
760 to 780,
800 to 900,
1160 to 1180,
1220 to 1340,
1440 to 1460,
1600 to 1620
12,000 FC1680 to 1720S-10L
12,000 FC1680 to 1720S-10R
12,000 FC440 to 660,S-14L
740 to 900,
1220 to 1320,
1380 to 1640,
1700 to 1720
12,000 FC760 to 900,S-14R
1220 to 1320,
1380 to 1420,
1460 to 1480,
1500 to 1640,
1700 to 1720
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
21 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 22

Group 1:
Table 3: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) Inspec-
tion
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) Inspec-
tion
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
9,000 FC440 to 660S-19LLower
(cont.) 12,000 FC720 to 740,S-19L
760 to 800
9,000 FC440 to 520S-19R
12,000 FC640 to 660,S-19R
720 to 740,
760 to 800
9,000 FC1280 to 1380,S-20L
1460 to 1720
12,000 FC1200 to 1220,S-20L
1380 to 1400,
1440 to 1460
9,000 FC1460 to 1720S-20R
12,000 FC1280 to 1340,S-20R
1360 to 1380,
1440 to 1460
4,500 FC500 to 740,S-26L
1460 to 1720
9,000 FC740 to 900S-26L
4,500 FC660 to 740,S-26R
1520 to 1720
9,000 FC500 to 540,S-26R
740 to 900
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
22 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 23

Group 2:
Table 4: Upper Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 2) External Detailed In-
spection
(OPTION 1) External High Fre-
quency Eddy Current (HFEC) In-
spection
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)Repeat Interval (Not to Exceed)
-12,000 Flight Cycles (FC)440 to 640,S-4LUpper
680 to 820,
1320 to 1440,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC640 to 680,S-4L
1600 to 1620
-12,000 FC440 to 640,S-4R
680 to 820,
1320 to 1440,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC640 to 680,S-4R
1600 to 1620
-12,000 FC440 to 640,S-10L
800 to 860,
1480 to 1600
3,000 FC12,000 FC640 to 660,S-10L
1400 to 1480,
1600 to 1620
-12,000 FC440 to 640,S-10R
800 to 860,
1480 to 1600
3,000 FC12,000 FC640 to 660,S-10R
1400 to 1480,
1600 to 1620
-12,000 FC1240 to 1380,S-20L
1460 to 1620
3,000 FC12,000 FC1380 to 1460,S-20L
1700 to 1720
-12,000 FC1240 to 1320,S-20R
1500 to 1620
3,000 FC12,000 FC1700 to 1720S-20R
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
23 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 24

Group 2:
Table 4: Upper Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 2) External Detailed In-
spection
(OPTION 1) External High Fre-
quency Eddy Current (HFEC) In-
spection
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)Repeat Interval (Not to Exceed)
-12,000 FC540 to 780,S-26LUpper
(cont.) 1360 to 1620
3,000 FC12,000 FC1620 to 1720S-26L
-12,000 FC680 to 780,S-26R
1500 to 1720
3,000 FC12,000 FC660 to 680S-26R
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
24 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 25

Group 2:
Table 5: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) In-
spection
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) In-
spection
Station NumberStringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
9,000 Flight Cycles (FC)440 to 640,S-4LLower
1360 to 1440,
1480 to 1600
12,000 FC640 to 660,S-4L
760 to 780,
800 to 900,
1160 to 1180,
1220 to 1360,
1440 to 1460,
1600 to 1620
9,000 FC440 to 640,S-4R
1360 to 1440,
1480 to 1600
12,000 FC640 to 660,S-4R
760 to 780,
800 to 900,
1160 to 1180,
1220 to 1360,
1440 to 1460,
1600 to 1620
12,000 FC1680 to 1720S-10L
12,000 FC1680 to 1720S-10R
12,000 FC440 to 660,S-14L
740 to 900,
1220 to 1320 (a),
1360 to 1640 (a),
1220 to 1640 (b),
1700 to 1720
12,000 FC760 to 900,S-14R
1220 to 1320 (a),
1220 to 1360 (b),
1380 to 1420,
1460 to 1640,
1700 to 1720
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
25 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 26

Group 2:
Table 5: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) In-
spection
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) In-
spection
Station NumberStringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
9,000 FC500 to 660S-19LLower
(cont.) 12,000 FC440 to 500,S-19L
720 to 740,
760 to 800
12,000 FC440 to 520,S-19R
640 to 660,
720 to 740,
760 to 800
9,000 FC1280 to 1380,S-20L
1460 to 1720
12,000 FC1200 to 1220,S-20L
1380 to 1400,
1440 to 1460
9,000 FC1500 to 1620S-20R
12,000 FC1280 to 1340,S-20R
1360 to 1380,
1440 to 1480,
1620 to 1720
4,500 FC500 to 740,S-26L
1460 to 1620
9,000 FC740 to 900,S-26L
1620 to 1720
4,500 FC660 to 740,S-26R
1620 to 1720
9,000 FC500 to 540,S-26R
740 to 900,
1520 to 1620
(a) Airplanes with No. 3 Emergency Exit Doors.
(b) Airplanes with Over Wing Exit Doors.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
26 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 27

Group 3:
Table 6: Upper Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 2) External Detailed In-
spection
(OPTION 1) External High Fre-
quency Eddy Current (HFEC) In-
spection
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)Repeat Interval (Not to Exceed)
-12,000 Flight Cycles (FC)440 to 640,S-4LUpper
680 to 820,
1320 to 1440,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC640 to 680,S-4L
1600 to 1620
-12,000 FC440 to 640,S-4R
680 to 820,
1320 to 1440,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC640 to 680,S-4R
1600 to 1620
-12,000 FC440 to 640S-10L
800 to 860,
1480 to 1600
3,000 FC12,000 FC640 to 660,S-10L
1400 to 1480,
1600 to 1620
-12,000 FC440 to 640,S-10R
800 to 860,
1480 to 1600
3,000 FC12,000 FC640 to 660,S-10R
1400 to 1480,
1600 to 1620
-12,000 FC1240 to 1380,S-20L
1460 to 1620
3,000 FC12,000 FC1380 to 1460,S-20L
1700 to 1720
-12,000 FC1240 to 1320,S-20R
1500 to 1620
3,000 FC12,000 FC1700 to 1720S-20R
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
27 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 28

Group 3:
Table 6: Upper Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 2) External Detailed In-
spection
(OPTION 1) External High Fre-
quency Eddy Current (HFEC) In-
spection
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)Repeat Interval (Not to Exceed)
-12,000 FC540 to 780,S-26LUpper
(cont.) 1360 to 1620
3,000 FC12,000 FC1620 to 1720S-26L
-12,000 FC680 to 780,S-26R
1500 to 1620
3,000 FC12,000 FC660 to 680,S-26R
1620 to 1720
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
28 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 29

Group 3:
Table 7: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) Inspec-
tion
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) Inspec-
tion
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
9,000 Flight Cycles (FC)440 to 640,S-4LLower
1360 to 1440,
1480 to 1600
12,000 FC640 to 660,S-4L
760 to 780,
800 to 900,
1160 to 1180,
1220 to 1360,
1440 to 1460,
1600 to 1620
9,000 FC440 to 640,S-4R
1360 to 1440,
1480 to 1600
12,000 FC640 to 660,S-4R
760 to 780,
800 to 900,
1160 to 1180,
1220 to 1360,
1440 to 1460,
1600 to 1620
12,000 FC1680 to 1720S-10L
12,000 FC1680 to 1720S-10R
12,000 FC440 to 660,S-14L
740 to 900,
1220 to 1640,
1700 to 1720
12,000 FC760 to 900,S-14R
1220 to 1360,
1380 to 1420,
1460 to 1640,
1700 to 1720
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
29 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 30

Group 3:
Table 7: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) Inspec-
tion
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) Inspec-
tion
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
9,000 FC500 to 660S-19LLower
(cont.) 12,000 FC440 to 500,S-19L
720 to 740,
760 to 800
12,000 FC440 to 520,S-19R
640 to 660,
720 to 740,
760 to 800
9,000 FC1280 to 1380,S-20L
1460 to 1720
12,000 FC1200 to 1220,S-20L
1380 to 1400,
1440 to 1460
9,000 FC1500 to 1720S-20R
12,000 FC1280 to 1340,S-20R
1360 to 1380,
1440 to 1480
4,500 FC500 to 740,S-26L
1460 to 1620
9,000 FC740 to 900,S-26L
1620 to 1720
4,500 FC660 to 740,S-26R
1520 to 1620
9,000 FC500 to 540,S-26R
740 to 900,
1620 to 1720
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
30 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 31

Group 4:
Table 8: Upper Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 2) External Detailed In-
spection
(OPTION 1) External High Fre-
quency Eddy Current (HFEC) In-
spection
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)Repeat Interval (Not to Exceed)
-12,000 Flight Cycles (FC)440 to 640,S-4LUpper
680 to 820,
1320 to 1440,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC640 to 680,S-4L
1600 to 1620
-12,000 FC440 to 640,S-4R
680 to 820,
1320 to 1400,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC640 to 680,S-4R
1600 to 1620
-12,000 FC440 to 640,S-10L
800 to 860,
1480 to 1600
3,000 FC12,000 FC640 to 660,S-10L
1400 to 1480,
1600 to 1620
-12,000 FC440 to 640,S-10R
800 to 860,
1480 to 1600
3,000 FC12,000 FC640 to 660,S-10R
1400 to 1480,
1600 to 1620
-12,000 FC1240 to 1300,S-20L
1460 to 1620
3,000 FC12,000 FC1360 to 1460,S-20L
1700 to 1720
-12,000 FC1240 to 1320S-20R
3,000 FC12,000 FC1500 to 1540,S-20R
1600 to 1620,
1700 to 1720
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
31 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 32

Group 4:
Table 8: Upper Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 2) External Detailed In-
spection
(OPTION 1) External High Fre-
quency Eddy Current (HFEC) In-
spection
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)Repeat Interval (Not to Exceed)
-12,000 FC540 to 780,S-26LUpper
(cont.) 1360 to 1620,
1660 to 1720
3,000 FC12,000 FC1620 to 1660S-26L
-12,000 FC680 to 780,S-26R
1660 to 1720
3,000 FC12,000 FC660 to 680,S-26R
1500 to 1540,
1600 to 1660
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
32 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 33

Group 4:
Table 9: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) Inspec-
tion
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) Inspec-
tion
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
9,000 Flight Cycles (FC)440 to 640,S-4LLower
1360 to 1440,
1480 to 1600
12,000 FC640 to 660,S-4L
760 to 780,
800 to 900,
1160 to 1180,
1220 to 1360,
1440 to 1460,
1600 to 1620
9,000 FC440 to 640,S-4R
1360 to 1440,
1480 to 1600
12,000 FC640 to 660,S-4R
760 to 780,
800 to 900,
1160 to 1180,
1220 to 1360,
1440 to 1460,
1600 to 1620
12,000 FC1680 to 1720S-10L
12,000 FC1680 to 1720S-10R
12,000 FC440 to 660,S- 14L
740 to 900,
1220 to 1320,
1380 to 1640,
1700 to 1720
12,000 FC760 to 900,S-14R
1220 to 1320,
1380 to 1420,
1460 to 1640,
1700 to 1720
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
33 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 34

Group 4:
Table 9: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) Inspec-
tion
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) Inspec-
tion
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
9,000 FC500 to 660S-19LLower
(cont.) 12,000 FC440 to 500,S-19L
720 to 740,
760 to 800
12,000 FC440 to 520,S-19R
640 to 660,
720 to 740,
760 to 800
9,000 FC1280 to 1380,S-20L
1460 to 1720
12,000 FC1200 to 1220,S-20L
1380 to 1400,
1440 to 1460
9,000 FC1620 to 1720S-20R
12,000 FC1280 to 1340,S-20R
1360 to 1380,
1440 to 1480,
1520 to 1540,
1600 to 1620
4,500 FC500 to 740,S-26L
1460 to 1720
9,000 FC740 to 900S-26L
4,500 FC660 to 740,S-26R
1620 to 1720
9,000 FC500 to 540,S-26R
740 to 900,
1520 to 1540,
1600 to 1620
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
34 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 35

Group 5:
Table 10: Upper Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 2) External Detailed In-
spection
(OPTION 1) External High Fre-
quency Eddy Current (HFEC) In-
spection
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)Repeat Interval (Not to Exceed)
-12,000 Flight Cycles (FC)700 to 820,S-4LUpper
1320 to 1440,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC660 to 700,S-4L
1600 to 1620
-12,000 FC700 to 820,S-4R
1320 to 1440,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC440 to 700,S-4R
1600 to 1620
-12,000 FC800 to 860,S-10L
1480 to 1600
3,000 FC12,000 FC440 to 480,S-10L
620 to 660,
1400 to 1480,
1600 to 1620
-12,000 FC440 to 640,S-10R
800 to 860,
1480 to 1600
3,000 FC12,000 FC640 to 660,S-10R
1400 to 1480,
1600 to 1620
-12,000 FC1240 to 1380,S-20L
1460 to 1620
3,000 FC12,000 FC1380 to 1460,S-20L
1700 to 1720
-12,000 FC1240 to 1320,S-20R
1500 to 1620
3,000 FC12,000 FC1700 to 1720S-20R
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
35 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 36

Group 5:
Table 10: Upper Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 2) External Detailed In-
spection
(OPTION 1) External High Fre-
quency Eddy Current (HFEC) In-
spection
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)Repeat Interval (Not to Exceed)
-12,000 FC500 to 620,S-26LUpper
(cont.) 680 to 780,
1360 to 1620
3,000 FC12,000 FC620 to 680,S-26L
1620 to 1720
-12,000 FC680 to 780,S-26R
1500 to 1620
3,000 FC12,000 FC660 to 680,S-26R
1620 to 1720
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
36 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 37

Group 5:
Table 11: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) Inspec-
tion
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) Inspec-
tion
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
9,000 Flight Cycles (FC)1480 to 1600S-4LLower
12,000 FC760 to 780,S-4L
800 to 900,
1160 to 1180,
1220 to 1460,
1600 to 1620
9,000 FC440 to 660,S-4R
1480 to 1600
12,000 FC760 to 780,S-4R
800 to 900,
1160 to 1180,
1220 to 1460,
1600 to 1620
12,000 FC1680 to 1720S-10L
12,000 FC1680 to 1720S-10R
12,000 FC440 to 480,S-14L
620 to 660,
740 to 900,
1220 to 1640,
1700 to 1720
12,000 FC760 to 900,S-14R
1220 to 1360,
1380 to 1420,
1460 to 1640,
1700 to 1720
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
37 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 38

Group 5:
Table 11: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) Inspec-
tion
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) Inspec-
tion
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
12,000 FC440 to 660,S-19LLower
(cont.) 720 to 740,
760 to 800
12,000 FC440 to 520,S-19R
640 to 660,
720 to 740,
760 to 800
9,000 FC1280 to 1380,S-20L
1460 to 1720
12,000 FC1200 to 1220,S-20L
1380 to 1400,
1440 to 1460
9,000 FC1500 to 1720S-20R
12,000 FC1280 to 1340,S-20R
1360 to 1380,
1440 to 1480
4,500 FC540 to 740,S-26L
1460 to 1620
9,000 FC500 to 540,S-26L
740 to 900,
1620 to 1720
4,500 FC660 to 740,S-26R
1520 to 1620
9,000 FC500 to 540,S-26R
740 to 900,
1620 to 1720
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
38 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 39

Group 6:
Table 12: Upper Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 2) External Detailed In-
spection
(OPTION 1) External High Fre-
quency Eddy Current (HFEC) In-
spection
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)Repeat Interval (Not to Exceed)
-12,000 Flight Cycles (FC)700 to 840,S-4LUpper
1320 to 1440,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC680 to 700,S-4L
1600 to 1620
-12,000 FC700 to 840,S-4R
1320 to 1440,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC680 to 700,S-4R
1600 to 1620
-12,000 FC700 to 760,S-10L
800 to 860,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC1400 to 1480,S-10L
1600 to 1640,
1700 to 1720
-12,000 FC440 to 640,S-10R
680 to 760,
800 to 860,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC640 to 680,S-10R
1400 to 1480,
1600 to 1640,
1700 to 1720
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
39 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 40

Group 6:
Table 12: Upper Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 2) External Detailed In-
spection
(OPTION 1) External High Fre-
quency Eddy Current (HFEC) In-
spection
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)Repeat Interval (Not to Exceed)
-12,000 FC700 to 760,S-14LUpper
(cont.) 1260 to 1440,
1480 to 1600
3,000 FC12,000 FC1440 to 1480,S-14L
1600 to 1620,
1680 to 1720
-12,000 FC460 to 640,S-14R
680 to 760,
1260 to 1440,
1480 to 1600
3,000 FC12,000 FC440 to 460,S-14R
640 to 660,
1440 to 1480,
1600 to 1620,
1680 to 1720
-12,000 FC700 to 760S-19L
-12,000 FC1240 to 1380,S-20L
1460 to 1720
3,000 FC12,000 FC1380 to 1460S-20L
-12,000 FC1240 to 1320,S-20R
1500 to 1720
-12,000 FC500 to 620,S-26L
680 to 780,
1360 to 1620,
1660 to 1720
3,000 FC12,000 FC1620 to 1660S-26L
-12,000 FC680 to 780,S-26R
1500 to 1620,
1660 to 1720
3,000 FC12,000 FC660 to 680,S-26R
1620 to 1660
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
40 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 41

Group 6:
Table 13: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) Inspec-
tion
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) Inspec-
tion
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
9,000 Flight Cycles (FC)1360 to 1440,S-4LLower
1480 to 1600,
1640 to 1700
12,000 FC660 to 680,S-4L
1200 to 1360,
1440 to 1480,
1600 to 1640,
1700 to 1720
9,000 FC440 to 660,S-4R
680 to 760,
1360 to 1440,
1480 to 1600,
1640 to 1700
12,000 FC660 to 680,S-4R
760 to 780,
860 to 900,
1200 to 1360,
1440 to 1480,
1600 to 1640,
1700 to 1720
12,000 FC620 to 660S-6L
9,000 FC1280 to 1440,S-10L
1480 to 1600,
1640 to 1720
12,000 FC440 to 480,S-10L
620 to 660,
680 to 800,
940 to 1060,
1160 to 1180,
1240 to 1280,
1440 to 1480,
1600 to 1640
9,000 FC460 to 640,S-10R
680 to 760,
1280 to 1440,
1480 to 1600,
1640 to 1720
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
41 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 42

Group 6:
Table 13: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) Inspec-
tion
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) Inspec-
tion
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
12,000 FC440 to 460,S-10RLower
(cont.) 640 to 680,
760 to 800,
940 to 1000,
1040 to 1060,
1160 to 1180,
1240 to 1280,
1440 to 1480,
1600 to 1640
9,000 FC1260 to 1720S-14L
12,000 FC1220 to 1260S-14L
9,000 FC440 to 520,S-14R
1260 to 1340,
1460 to 1720
12,000 FC520 to 560,S-14R
1220 to 1260,
1340 to 1360
9,000 FC700 to 780S-19L
12,000 FC660 to 680S-19L
12,000 FC440 to 560,S-19R
620 to 660,
740 to 780
9,000 FC1280 to 1380,S-20L
1460 to 1720
12,000 FC1180 to 1200,S-20L
1260 to 1280,
1380 to 1460
9,000 FC1500 to 1720S-20R
12,000 FC1260 to 1340,S-20R
1360 to 1380,
1440 to 1500
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
42 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 43

Group 6:
Table 13: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) Inspec-
tion
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) Inspec-
tion
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
4,500 FC500 to 740,S-26LLower
(cont.) 1460 to 1720
9,000 FC740 to 900S-26L
4,500 FC660 to 740,S-26R
1520 to 1720
9,000 FC440 to 540,S-26R
740 to 900,
1480 to 1520
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
43 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 44

Group 7:
Table 14: Upper Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 2) External Detailed In-
spection
(OPTION 1) External High Fre-
quency Eddy Current (HFEC) In-
spection
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)Repeat Interval (Not to Exceed)
-12,000 Flight Cycles (FC)680 to 820,S-4LUpper
1320 to 1440,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC660 to 680,S-4L
1600 to 1620
-12,000 FC680 to 820,S-4R
1320 to 1440,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC440 to 680,S-4R
1600 to 1620
-12,000 FC800 to 860,S-10L
1480 to 1600
3,000 FC12,000 FC440 to 480,S-10L
620 to 660,
1400 to 1480,
1600 to 1620
-12,000 FC440 to 640,S-10R
800 to 860,
1480 to 1600
3,000 FC12,000 FC640 to 660,S-10R
1400 to 1480,
1600 to 1620
-12,000 FC1240 to 1300,S-20L
1460 to 1620
3,000 FC12,000 FC1360 to 1460,S-20L
1700 to 1720
-12,000 FC1240 to 1320S-20R
3,000 FC12,000 FC1500 to 1540,S-20R
1600 to 1620,
1700 to 1720
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
44 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 45

Group 7:
Table 14: Upper Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 2) External Detailed In-
spection
(OPTION 1) External High Fre-
quency Eddy Current (HFEC) In-
spection
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)Repeat Interval (Not to Exceed)
-12,000 FC540 to 780,S-26LUpper
(cont.) 1360 to 1620,
1660 to 1720
3,000 FC12,000 FC1620 to 1660S-26L
-12,000 FC680 to 780,S-26R
1660 to 1720
3,000 FC12,000 FC660 to 680,S-26R
1500 to 1540,
1600 to 1660
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
45 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 46

Group 7:
Table 15: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) Inspec-
tion
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) Inspec-
tion
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
9,000 Flight Cycles (FC)1360 to 1440,S-4LLower
1480 to 1600
12,000 FC760 to 780,S-4L
800 to 900,
1160 to 1180,
1220 to 1360,
1440 to 1460,
1600 to 1620
9,000 FC440 to 660,S-4R
1360 to 1440,
1480 to 1600
12,000 FC760 to 780,S-4R
800 to 900,
1160 to 1180,
1220 to 1360,
1440 to 1460,
1600 to 1620
12,000 FC1680 to 1720S-10L
12,000 FC1680 to 1720S-10R
12,000 FC440 to 480,S-14L
620 to 660,
740 to 900,
1220 to 1320,
1380 to 1640,
1700 to 1720
12,000 FC760 to 900,S-14R
1220 to 1320,
1380 to 1420,
1460 to 1640,
1700 to 1720
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
46 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 47

Group 7:
Table 15: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) Inspec-
tion
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) Inspec-
tion
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
9,000 FC500 to 660S-19LLower
(cont.) 12,000 FC440 to 500,S-19L
720 to 740,
760 to 800
12,000 FC440 to 520,S-19R
640 to 660,
720 to 740,
760 to 800
9,000 FC1280 to 1380,S-20L
1460 to 1720
12,000 FC1200 to 1220,S-20L
1380 to 1400,
1440 to 1460
9,000 FC1620 to 1720S-20R
12,000 FC1280 to 1340,S-20R
1360 to 1380,
1440 to 1480,
1520 to 1540,
1600 to 1620
4,500 FC500 to 740,S-26L
1460 to 1720
9,000 FC740 to 900S-26L
4,500 FC660 to 740,S-26R
1620 to 1720
9,000 FC500 to 540,S-26R
740 to 900,
1520 to 1540,
1600 to 1620
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
47 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 48

Group 8:
Table 16: Upper Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 2) External Detailed In-
spection
(OPTION 1) External High Fre-
quency Eddy Current (HFEC) In-
spection
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)Repeat Interval (Not to Exceed)
-12,000 Flight Cycles (FC)440 to 640,S-4LUpper
680 to 780,
1360 to 1440,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC640 to 680,S-4L
1280 to 1360,
1440 to 1480,
1600 to 1620
-12,000 FC440 to 640,S-4R
680 to 780,
1360 to 1440,
1480 to 1600,
1640 to 1700
3,000 FC12,000 FC640 to 680,S-4R
1280 to 1360,
1440 to 1480,
1600 to 1620
-12,000 FC440 to 640,S-10L
1480 to 1600
3,000 FC12,000 FC640 to 660,S-10L
1400 to 1480,
1600 to 1620
-12,000 FC440 to 640,S-10R
1480 to 1600
3,000 FC12,000 FC640 to 660,S-10R
1400 to 1480,
1600 to 1620
-12,000 FC780 to
780+80
S-19L
3,000 FC12,000 FC780+80 to
780+140
S-19L
3,000 FC12,000 FC780+100 to
780+140
S-19R
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
48 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 49

Group 8:
Table 16: Upper Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 2) External Detailed In-
spection
(OPTION 1) External High Fre-
quency Eddy Current (HFEC) In-
spection
Station
Number
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)Repeat Interval (Not to Exceed)
-12,000 FC1520 to 1620S-20LUpper
(cont.) 3,000 FC12,000 FC1460 to 1520,S-20L
1700 to 1720
-12,000 FC1520 to 1620S-20R
3,000 FC12,000 FC1500 to 1520,S-20R
1700 to 1720
-12,000 FC540 to 660,S-26L
680 to 780,
1460 to 1620
3,000 FC12,000 FC660 to 680,S-26L
780 to
780+80,
1620 to 1720
-12,000 FC680 to 780,S-26R
1500 to 1720
3,000 FC12,000 FC660 to 680,S-26R
780 to
780+80
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
49 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 50

Group 8:
Table 17: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) In-
spection
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) In-
spection
Station Num-
ber
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
9,000 Flight Cycles (FC)440 to 640,S-4LLower
1480 to 1600
12,000 FC640 to 660,S-4L
760 to 780+80,
1220 to 1460,
1600 to 1620
9,000 FC440 to 640,S-4R
1480 to 1600
12,000 FC640 to 660,S-4R
760 to 780+80,
1220 to 1460,
1600 to 1620
12,000 FC1680 to 1720S-10L
12,000 FC1680 to 1720S-10R
9,000 FC500 to 660S-19L
12,000 FC440 to 500,S-19L
760 to
780+140
12,000 FC440 to 520,S-19R
760 to 780,
780+80 to
780+140
9,000 FC1460 to 1720S-20L
12,000 FC1180+100 to
1300,
S-20L
1360 to 1400,
1420 to 1460
9,000 FC1500 to 1620S-20R
12,000 FC1180+100 to
1280,
S-20R
1480 to 1500,
1620 to 1720
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
50 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 51

Group 8:
Table 17: Lower Fastener Row, Fuselage Skin Longitudinal Lap Splice Inspection
(OPTION 1) External Dual Frequency Eddy Current (DFEC) In-
spection
or
(OPTION 2) Internal High Frequency Eddy Current (HFEC) In-
spection
Station Num-
ber
Stringer
Location
Fastener
Row Loca-
tion
Repeat Interval (Not to Exceed)
4,500 FC500 to 660,S-26LLower
(cont.) 1460 to 1620
9,000 FC1620 to 1720S-26L
4,500 FC1620 to 1720S-26R
9,000 FC1500 to 1520,S-26R
1560 to 1620
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
It is not necessary to do inspections in accordance with this service bulletin in areas where existing
repairs, approved by the Boeing ODA via FAA 8100-9 form or FAA 8110-3 form, cover the affected
inspection areas, provided the outermost repair doubler extends a minimum of three rows of fasteners
above and below the original group of lap splice fasteners. Damage Tolerance Inspection instructions
specified for existing repairs must continue. Inspections outside of the repaired boundaries must continue
in accordance with this service bulletin.
It is not necessary to do inspections in accordance with this service bulletin in areas where external
wing to body fairing support brackets are attached over the lap splice at frame locations.
These existing repair areas and wing to body fairing support bracket areas at frame locations, as
described above, are exempted from the inspections in this service bulletin.
The Manager of the FAA Los Angeles ACO Branch approves the exempted inspections defined in this
service bulletin as an Alternative Method of Compliance (AMOC) to paragraph (h) of AD 2006-11-11,
for the inspections of SSI 53-30-07 / SSI 53-60-07 [Fuselage Skin Lap Splices, Upper Fastener Row,
L & R (Applicable to 757-200, 757-200CB, 757-200PF, 757-300), and Fuselage Longitudinal Lap
Splices, Inner Skin Lower Fastener Row, S-4, S-10, S-14, S-19, S-20, S-26, L & R (Applicable to
757-200, 757-200CB, 757-200PF, 757-300)] listed in Section 9 of the Maintenance Planning Data
(MPD) Document, D622N001-9. This AMOC only applies to the common inspection areas which qualify
for exemption from inspection per this Service Bulletin. Damage Tolerance Inspection instructions
specified for existing repairs must continue. All provisions of AD 2006-11-11 that are not specifically
referenced in the above statements remain fully applicable and must be complied with accordingly.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
51 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 52

In addition, the Manager of the FAA Los Angeles ACO Branch approves the inspections in this service
bulletin as an Alternative Method of Compliance (AMOC) to paragraph (h) of AD 2006-11-11, for the
inspections of SSI 53-30-07 / SSI 53-60-07 [Fuselage Skin Lap Splices, Upper Fastener Row, L & R
(Applicable to 757-200, 757-200CB, 757-200PF, 757-300), and Fuselage Longitudinal Lap Splices,
Inner Skin Lower Fastener Row, S-4, S-10, S-14, S-19, S-20, S-26, L & R (Applicable to 757-200,
757-200CB, 757-200PF, 757-300)] listed in Section 9 of the Maintenance Planning Data (MPD)
Document, D622N001-9. This AMOC only applies to the common fuselage skin longitudinal lap splice
areas between BS 440 to BS 1720 that are inspected per this Service Bulletin. All provisions of AD
2006-11-11 that are not specifically referenced in the above statements remain fully applicable and
must be complied with accordingly.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this inspection for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools
Group 1:
Elapsed HoursTask HoursNumber of PersonsTask
4.0016.004Open Access
25.15100.604FIGURE 1
39.60158.404FIGURE 2 (OPTION 1)
or
FIGURE 3 (OPTION 2) (b)
4.0016.004Close Access
72.75291.00TOTAL FOR EACH AIRPLANE (a)
(a) Hours for repairs are not included and depend on inspection findings.
(b) Additional hours may be required for removal of interior components.
Group 2:
Elapsed HoursTask HoursNumber of PersonsTask
4.0016.004Open Access
25.71102.844FIGURE 4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
52 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 53

Group 2:
Elapsed HoursTask HoursNumber of PersonsTask
39.76159.044FIGURE 5 (OPTION 1)
or
FIGURE 6 (OPTION 2) (b)
4.0016.004Close Access
73.47293.88TOTAL FOR EACH AIRPLANE (a)
(a) Hours for repairs are not included and depend on inspection findings.
(b) Additional hours may be required for removal of interior components.
Group 3:
Elapsed HoursTask HoursNumber of PersonsTask
4.0016.004Open Access
25.71102.844FIGURE 7
39.76159.044FIGURE 8 (OPTION 1)
or
FIGURE 9 (OPTION 2) (b)
4.0016.004Close Access
73.47293.88TOTAL FOR EACH AIRPLANE (a)
(a) Hours for repairs are not included and depend on inspection findings.
(b) Additional hours may be required for removal of interior components.
Group 4:
Elapsed HoursTask HoursNumber of PersonsTask
4.0016.004Open Access
24.7098.804FIGURE 10
39.15156.604FIGURE 11 (OPTION 1)
or
FIGURE 12 (OPTION 2) (b)
4.0016.004Close Access
71.85287.40TOTAL FOR EACH AIRPLANE (a)
(a) Hours for repairs are not included and depend on inspection findings.
(b) Additional hours may be required for removal of interior components.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
53 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 54

Group 5:
Elapsed HoursTask HoursNumber of PersonsTask
4.0016.004Open Access
22.4589.804FIGURE 13
36.90147.604FIGURE 14 (OPTION 1)
or
FIGURE 15 (OPTION 2) (b)
4.0016.004Close Access
67.35269.40TOTAL FOR EACH AIRPLANE (a)
(a) Hours for repairs are not included and depend on inspection findings.
(b) Additional hours may be required for removal of interior components.
Group 6:
Elapsed HoursTask HoursNumber of PersonsTask
4.0016.004Open Access
32.00128.004FIGURE 16
51.75207.004FIGURE 17 (OPTION 1)
or
FIGURE 18 (OPTION 2) (b)
4.0016.004Close Access
91.75367.00TOTAL FOR EACH AIRPLANE (a)
(a) Hours for repairs are not included and depend on inspection findings.
(b) Additional hours may be required for removal of interior components.
Group 7:
Elapsed HoursTask HoursNumber of PersonsTask
4.0016.004Open Access
22.0088.004FIGURE 19
36.45145.804FIGURE 20 (OPTION 1)
or
FIGURE 21 (OPTION 2) (b)
4.0016.004Close Access
66.45265.8TOTAL FOR EACH AIRPLANE (a)
(a) Hours for repairs are not included and depend on inspection findings.
(b) Additional hours may be required for removal of interior components.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
54 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 55

Group 8:
Elapsed HoursTask HoursNumber of PersonsTask
4.0016.004Open Access
29.60118.404FIGURE 22
26.15104.604FIGURE 23 (OPTION 1)
or
FIGURE 24 (OPTION 2) (b)
4.0016.004Close Access
63.75255.00TOTAL FOR EACH AIRPLANE (a)
(a) Hours for repairs are not included and depend on inspection findings.
(b) Additional hours may be required for removal of interior components.
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Boeing Service Related Problem (SRP) 757-SRP-53-0487
b. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2006-11-11
c. Service Bulletin Index D624N001
d. Standard Overhaul Practices Manual (SOPM) 20-50-01
e. 757 Aircraft Maintenance Manual (AMM) 25-21-02, 25-21-05, 25-25-01, 25-50-02, 25-50-07,
25-55-00, 25-55-07, 53-36-01, 53-66-01
f. 757 Fleet Team Digest (FTD) 53-15006
g. 757 Non-Destructive Testing (NDT) Manual Part 6, 51-00-01, Part 6, 51-00-15, Part 6, 51-00-19,
Part 6, 53-00-11, Part 6, 53-30-06, Part 6, 53-30-12, Part 6, 53-30-13
2. Data Supplied with this Service Bulletin:
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
55 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 56

3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
CENTERLINE DIAGRAM BODY STRUCTURE MODEL 757140N1510
AFT FAIRING PANEL INSTL - BS 1240 TO BS 1352149N7660
WING TO BODY FAIRING. SECT. 49149N7001
The table above lists applicable drawings used to prepare this service bulletin. The drawings are
not necessary to do the specified inspections, and are not supplied with this service bulletin. The
drawings may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
757 NDT Manual Part 6, 53-00-11,
757 NDT Manual Part 6, 53-30-13,
757 NDT Manual Part 6, 53-30-06
757 Non-Destructive Testing Manual
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS but no new DTIs are necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
56 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 57

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the inspection and/or repair procedures given in this
service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
None.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
57 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 58

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
58 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT
BLANK PAGE

### Page 59

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 757 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 757
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 757
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
5. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate
full threaded fasteners (screws) needed for installation in this service bulletin.
6. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
59 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

### Page 60

7. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance unless otherwise
specified. A mirror may be necessary to enhance visual access to all exposed surfaces
in the inspection area. This level of inspection is made under normally available
lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may
require removal or opening of access panels or doors. Stands, ladders or platforms
may be required to gain proximity to the area being checked.
8. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
9. Boeing Service Letter 757-SL-51-022, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
10. Refer to APPENDIX A for logic diagram(s). Logic diagrams are provided as an aid
only. Information contained in Paragraph 1.E., Compliance is the primary source for
compliance times. Information in Paragraph 3.B., Work Instructions is the primary
source for tasks required for compliance.
11. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
12. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
13. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
14. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an
OPTION number, do all of the ACTION numbers for that CONDITION number or
OPTION number.
15. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
16. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. If a step or sub-step is labeled
"RC Exempt," then the RC requirement is removed from that step or sub-step. An
Alternative Method of Compliance (AMOC) is required for any deviations to RC steps,
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 06, 2017
757-53A0104
60 of 141
BOEING SERVICE BULLETIN 757-53A0104
ALERTALERT

The text continues at https://openairdocs.org/service-documents/boeing/757-53a0104/file/e7bd3719c191.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
