# Boeing Alert Service Bulletin 757-53A0108: FAA-2017-0711_SB-757-53A0108 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2017-0711; AD 2018-06-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 757-53A0108](https://openairdocs.org/service-documents/boeing/757-53a0108.md)
- Title as filed: FAA-2017-0711_SB-757-53A0108 1
- Pages: 132
- PDF: https://openairdocs.org/files/sha256/af/90/af90923806f7c8bfd1fac0cfa1a9b05f8424e57b7f99d23305e3b8ffab95f27e
- Page: https://openairdocs.org/service-documents/boeing/757-53a0108/file/af90923806f7

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
757
Service Bulletin
ALERT
Number: 757-53A0108
Original Issue: November 14, 2016
ATA System: 5360
SUBJECT: FUSELAGE - Section 46 - Body Station 1640 Fuselage Frame Inspection
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2016 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: November 14, 2016
757-53A0108
1 of 132
4.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
2 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
S u m m a r y  ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A . E f f e c t i v i t y  ................................................ 9
1. Airplanes ............................................. 9
2 . S p a r e s  A f f e c t e d  ........................................ 1 3
B. Concurrent Requirements ...................................... 1 3
C. Reason ................................................ 1 4
D. Description .............................................. 1 4
E. Compliance .............................................. 1 5
F . A p p r o v a l  ............................................... 4 3
G. Manpower .............................................. 4 3
H. Weight and Balance Changes .................................... 4 4
I. Electrical Load Data ......................................... 4 4
J . R e f e r e n c e s  .............................................. 4 4
1. Existing Data: ......................................... 4 4
2. Data Supplied with this Service Bulletin: ........................... 4 5
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 4 5
K. Publications Affected ........................................ 4 5
L. Interchangeability and Intermixability of Parts ........................... 4 5
M. Software Accomplishment Summary ................................ 4 5
2. MATERIAL INFORMATION ........................................ 4 7
A. Material - Price and Availability ................................... 4 7
B. Industry Support Information .................................... 4 7
C. Parts Necessary for Each Airplane ................................. 4 7
1 . K i t s / P a r t s  ............................................ 4 7
2. Parts and Materials Supplied by the Operator ........................ 4 7
3. Parts Modified and Reidentified ................................ 4 7
4. Parts Removed and Not Replaced .............................. 4 7
D. Parts Necessary to Change Spares ................................. 4 7
E. Special Tooling - Price and Availability ............................... 4 7
F. Special Tooling Necessary to do this Service Bulletin ....................... 4 7
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 4 9
A. GENERAL INFORMATION ..................................... 4 9
B. WORK INSTRUCTIONS ....................................... 5 1
FIGURE 1: LEFT SIDE - STA 1640 FUSELAGE FRAME AT STRINGER S-14 AND LOWER HINGE
INTERCOSTAL - HFEC AND LFEC INSPECTION [Group 1-3] ............... 5 6
FIGURE 2: RIGHT SIDE - STA 1640 FUSELAGE FRAME AT STRINGER S-14 AND LOWER HINGE
INTERCOSTAL - HFEC AND LFEC INSPECTION [Group 1-3] ............... 6 0
FIGURE 3: LEFT SIDE - STA 1640 FUSELAGE FRAME AT STRINGER S-14 AND LOWER HINGE
INTERCOSTAL - HFEC INSPECTION [Group 1-3] ..................... 6 4
FIGURE 4: RIGHT SIDE - STA 1640 FUSELAGE FRAME AT STRINGER S-14 AND LOWER HINGE
INTERCOSTAL - HFEC INSPECTION [Group 1-3] ..................... 6 7
FIGURE 5: LEFT SIDE - STA 1640 FUSELAGE FRAME AT STRINGER S-11 AND S-13 INTERCOSTAL
AREAS - HFEC INSPECTION [Group 1-3] .......................... 7 0
FIGURE 6: RIGHT SIDE - STA 1640 FUSELAGE FRAME AT STRINGER S-11 AND S-13 INTERCOSTAL
AREAS - HFEC INSPECTION [Group 1-3] .......................... 7 4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
3 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 4

FIGURE 7: LEFT SIDE - STA 1640 FUSELAGE FRAME AT STRINGER S-14 INTERCOSTAL AREA -
HFEC AND LFEC INSPECTION [Group 4-5] ......................... 7 8
FIGURE 8: RIGHT SIDE - STA 1640 FUSELAGE FRAME AT STRINGER S-14 INTERCOSTAL AREA -
HFEC AND LFEC INSPECTION [Group 4-5] ......................... 8 1
FIGURE 9: LEFT SIDE - STA 1640 FUSELAGE FRAME AT STRINGER S-14 INTERCOSTAL AREA- HFEC
INSPECTION [Group 4-5] ................................... 8 4
FIGURE 10: RIGHT SIDE - STA 1640 FUSELAGE FRAME AT STRINGER S-14 INTERCOSTAL AREA -
HFEC INSPECTION [Group 4-5] ............................... 8 7
FIGURE 11: LEFT SIDE - STA 1640 FUSELAGE FRAME AT LOWER HINGE INTERCOSTAL, STRINGERS
S-11 AND S-13 - HFEC INSPECTION [Group 4-5] ...................... 9 0
FIGURE 12: RIGHT SIDE - STA 1640 FUSELAGE FRAME AT LOWER HINGE INTERCOSTAL, STRINGERS
S-11 AND S-13 - HFEC INSPECTION [Group 4-5] ...................... 9 3
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 1 [Group 1, Configuration
1 ]  ................................................ 9 6
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 2 [Group 1, Configuration
2 ]  ................................................ 1 0 2
APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 3 [Group 2] ..... 1 0 7
APPENDIX D: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 4 [Group 3, Configuration
1 ]  ................................................ 1 1 2
APPENDIX E: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 5 [Group 3, Configuration
2 ]  ................................................ 1 1 8
APPENDIX F: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 6 [Group 4] ..... 1 2 3
APPENDIX G: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE: TABLE 7 [Group 5] ..... 1 2 8
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
4 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 5

Commercial 
Airplanes
757
Service Bulletin
ALERT
SummaryNumber: 757-53A0108Original Issue: November 14, 2016
ATA System: 5360
SUBJECT: FUSELAGE - Section 46 - Body Station 1640 Fuselage Frame Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin is sent to provide instructions to do High Frequency Eddy Current (HFEC) and Low Frequency
Eddy Current (LFEC) inspections for any crack in the fuselage frame at Body Station (STA) 1640, between
stringers S-11 and S-14, on the left and right side of the airplane. If the work given in this service bulletin is not
done, such fatigue cracking could adversely affect the structural integrity of the airplane.
One operator reported a crack finding, at 24,607 total flight cycles, in the STA 1640 fuselage frame at stringer
S-14R, adjacent to door stop number 5. The crack had fully severed the inner chord and web of the STA 1640
fuselage frame. The cracking is attributed to fatigue caused by flight loads and pressurization of the fuselage.
Boeing has determined that the existing inspection programs are not sufficient to detect these cracks because
most of the STA 1640 fuselage frame is obscured by adjacent structure. Accomplishment of this service bulletin
will improve detection of cracking in the STA 1640 fuselage frame and make sure that any crack is found and
repaired before the crack grows to a critical length.
Boeing Fleet Team Digest (FTD) 757 FTD 53-16001 is related to this service bulletin.
Boeing Service Related Problem (SRP) 757-SRP-53-0525 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
5 of 132

### Page 6

ReferenceAffectedPlanning Data
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedNoPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
NoOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION
Get access to the Body Station (STA) 1640 fuselage frame, between stringers S-11 and S-14, on the left and
right side of the airplane. Do High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC)
inspections for any crack in the STA 1640 fuselage frame, between stringers S-11 and S-14, on the left and
right side of the airplane. If any crack is found, contact The Boeing Company for repair instructions and do the
repair, and repeat the inspections in unrepaired areas at the times given in Paragraph 1.E., Compliance. If no
crack is found, repeat the inspections at the times given in Paragraph 1.E., Compliance.
EFFECTIVITY
All 757-200, -200CB, and -300 Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspections given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
6 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 7 (OCR)

BOEING SERVICE BULLETIN 757-53A0108
ALERT  ALERT
STA
1640
STA
1620
S-8
DO HIGH FREQUENCY EDDY CURRENT (HFEC  • S-10
AND LOW FREQUENCY EDDY CURRENT (LFEC)
INSPECTIONS FOR ANY CRACK
• S
- S-13
- LOWER
HINGE
INTERCOSTAL
• S-14
..•.S-16
LEFT SIDE SHOWN, RIGHT SIDE SIMILAR
2522109
Original Issue: November 14, 2016
Export Controlled ECCN: 9E991 - BOEING  757-53A0108
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  7 of 132

### Page 8

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
8 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
757
Service Bulletin
ALERT
Number: 757-53A0108
Original Issue: November 14, 2016
ATA System: 5360
SUBJECT: FUSELAGE - Section 46 - Body Station 1640 Fuselage Frame Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is applicable to all 757-200, -200CB, and -300 Airplanes, in 5 Groups. The
Variable Numbers and Group Information for the applicable airplanes is given below.
Refer to Service Bulletin Index D624N001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP
757-200 and -200CB airplanes that have a long inner chord strap at
the Body Station (STA) 1640 fuselage frame.
-1
757-200 and -200CB airplanes with less than 32,000 total flight cycles
at the original issue date of this service bulletin, that have a long inner
chord strap at the Body Station (STA) 1640 fuselage frame.
1
757-200 and -200CB airplanes with 32,000 total flight cycles or more
at the original issue date of this service bulletin, that have a long inner
chord strap at the Body Station (STA) 1640 fuselage frame.
2
757-200 Boeing special freighter airplanes that have a long inner
chord strap at the STA 1640 fuselage frame.
-2
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
9 of 132

### Page 10

DESCRIPTIONCONFIGURATIONGROUP
757-300 airplanes that have a long inner chord strap at STA 1640
fuselage frame.
-3
757-300 airplanes, with less than 16,000 total flight cycles at the
original issue date of this service bulletin, that have a long inner chord
strap at STA 1640 fuselage frame.
1
757-300 airplanes, with 16,000 total flight cycles or more at the
original issue date of this service bulletin, that have a long inner chord
strap at STA 1640 fuselage frame.
2
757-200 airplanes that have a short inner chord strap at the STA
1640 fuselage frame.
-4
757-200 Boeing special freighter airplanes that have a short inner
chord strap at the STA 1640 fuselage frame.
-5
Airplane Models:
757-200, 757-200CB, 757-300
GroupVariable Number
4NA001 - NA021
1NA022 - NA028
4NA191
1NA192 - NA199
5NA201 - NA204
4NA205
5NA206 - NA213
4NA214
2NA215 - NA236
1NA237 - NA239
1NA301 - NA305
1NA341 - NA352
1NA391 - NA399
4NA401 - NA403
1NA404 - NA408
1NA441 - NA447
4NA501 - NA504
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
10 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 11

GroupVariable Number
1NA505 - NA586
4NB001
1NB002 - NB004
1NB021 - NB023
1NB036 - NB041
1NB051 - NB053
1NB061 - NB073
1NB079
1NB131 - NB148
1NB161 - NB162
1NB166 - NB168
1NB201 - NB204
1NB221 - NB228
1NB230
1NB236
1NB239
1NB261 - NB267
1NB291 - NB299
1NB301 - NB302
1NB311 - NB312
1NB321 - NB331
1NB421 - NB438
1NB446
1NB451 - NB454
1NB501 - NB523
1NB561
1NB571
1NB581 - NB583
1NC001 - NC033
1NC041 - NC042
1NC051 - NC052
1NC056 - NC062
1NC066 - NC084
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
11 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 12

GroupVariable Number
1NC091 - NC094
1NC151
1NC161
1ND001 - ND007
1ND011 - ND059
1ND111 - ND113
1ND161 - ND199
1ND201 - ND203
1ND221 - ND225
1ND241 - ND248
1ND301 - ND322
1ND401
1ND891
1ND895
1NE001 - NE008
1NE011 - NE088
1NE091 - NE094
1NE141 - NE150
1NE161 - NE177
1NE201 - NE204
1NE301 - NE302
1NE311 - NE325
1NJ001 - NJ004
1NJ031 - NJ032
1NJ551 - NJ555
3NL001 - NL002
3NL006 - NL017
3NL101 - NL109
3NL141
3NL601 - NL616
1NN001 - NN002
1NN051 - NN052
1NP901 - NP904
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
12 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 13

GroupVariable Number
1NT201 - NT202
1NT231 - NT234
1NT237 - NT240
1NT242
1NT245 - NT248
1NT281 - NT289
1NT341 - NT347
1NT351 - NT360
1NT371 - NT373
1NT375 - NT379
1NT381 - NT386
1NT401 - NT409
1NT411 - NT412
1NT426 - NT427
1NT431 - NT432
1NT436 - NT438
1NT441 - NT442
1NT446
1NT701 - NT769
1NT791 - NT796
1NT861 - NT862
1NT881 - NT885
1NT901 - NT916
1NT971 - NT985
1NU031 - NU038
3NU701 - NU705
3NU721 - NU728
3NU731 - NU732
2. Spares Affected
None.
B. Concurrent Requirements
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
13 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 14

C. Reason
This service bulletin is sent to provide instructions to do High Frequency Eddy Current (HFEC) and
Low Frequency Eddy Current (LFEC) inspections for any crack in the fuselage frame at Body Station
(STA) 1640, between stringers S-11 and S-14, on the left and right side of the airplane. If the work
given in this service bulletin is not done, such fatigue cracking could adversely affect the structural
integrity of the airplane.
One operator reported a crack finding, at 24,607 total flight cycles, in the STA 1640 fuselage frame at
stringer S-14R, adjacent to door stop number 5. The crack had fully severed the inner chord and web
of the STA 1640 fuselage frame. The cracking is attributed to fatigue caused by flight loads and
pressurization of the fuselage.
Boeing has determined that the existing inspection programs are not sufficient to detect these cracks
because most of the STA 1640 fuselage frame is obscured by adjacent structure. Accomplishment of
this service bulletin will improve detection of cracking in the STA 1640 fuselage frame and make sure
that any crack is found and repaired before the crack grows to a critical length.
Boeing Fleet Team Digest (FTD) 757 FTD 53-16001 is related to this service bulletin.
Boeing Service Related Problem (SRP) 757-SRP-53-0525 is related to this service bulletin.
D. Description
Get access to the Body Station (STA) 1640 fuselage frame, between stringers S-11 and S-14, on the
left and right side of the airplane. Do High Frequency Eddy Current (HFEC) and Low Frequency Eddy
Current (LFEC) inspections for any crack in the STA 1640 fuselage frame, between stringers S-11 and
S-14, on the left and right side of the airplane. If any crack is found, contact The Boeing Company for
repair instructions and do the repair, and repeat the inspections in unrepaired areas at the times given
in Paragraph 1.E., Compliance. If no crack is found, repeat the inspections at the times given in
Paragraph 1.E., Compliance.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
251, 252757-200, 757-200CB
Group 2, 4-5:
Affected Maintenance Zones
ZoneModel
251, 252757-200
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
14 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 15

Group 3:
Affected Maintenance Zones
ZoneModel
251, 252757-300
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive (AD) related
to this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in
this service bulletin mandatory.
Do the required actions in accordance with Paragraph 3. Accomplishment Instructions.
Logic diagrams showing compliance tasks and compliance times are included as an aid in APPENDIX
A, APPENDIX B, APPENDIX C, APPENDIX D, APPENDIX E, APPENDIX F, and APPENDIX G.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Group 1, Configuration 1:
Table 1: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 3,000
flight cycles after
the original issue
date of this ser-
vice bulletin, or
before 32,500 to-
tal flight cycles,
whichever oc-
curs first.
Before 20,000
total flight cycles.
Inspect for any existing re-
pairs in the Body Station
(STA) 1640 fuselage frame
at stringer S-11, S-13, S-14
and lower hinge intercostal,
left and right side.
757-200 and -200CB air-
planes with less than
32,000 total flight cycles
at the original issue date
of this service bulletin,
that have a long inner
chord strap at the Body
Station (STA) 1640 fuse-
lage frame.
-Before further flight.Contact The Boeing Compa-
ny for repair evaluation and
inspection instructions and
do the instructions.
CONDITION 1: ANY EX-
ISTING REPAIR FOUND
IN BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13,
S-14, OR LOWER
HINGE INTERCOSTAL
AREAS, LEFT OR
RIGHT SIDE (b)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
15 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 16

Group 1, Configuration 1:
Table 1: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 3,000
flight cycles after
the original issue
date of this ser-
vice bulletin, or
before 32,500 to-
tal flight cycles,
whichever oc-
curs first.
Before 20,000
total flight cycles.
OPTION 1 (ACTION 1): Do
PART 2: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-14 AND IN-
TERCOSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) AND LOW
FREQUENCY EDDY CUR-
RENT (LFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
CONDITION 2: NO EX-
ISTING REPAIR FOUND
IN BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13,
S-14, OR LOWER
HINGE INTERCOSTAL
AREAS, LEFT OR
RIGHT SIDE
-Within 3,000
flight cycles after
the original issue
date of this ser-
vice bulletin.
Before 20,000
total flight cycles.
OPTION 1 (ACTION 2): Do
PART 4: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND
INTERCOSTAL AREAS
HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
-Within 3,000
flight cycles after
the original issue
date of this ser-
vice bulletin, or
before 32,500 to-
tal flight cycles,
whichever oc-
curs first.
Before 20,000
total flight cycles.
OPTION 2 (ACTION 1): Do
PART 3: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-14 AND IN-
TERCOSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
-Within 3,000
flight cycles after
the original issue
date of this ser-
vice bulletin.
Before 20,000
total flight cycles.
OPTION 2 (ACTION 2): Do
PART 4: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND
INTERCOSTAL AREAS
HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
16 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 17

Group 1, Configuration 1:
Table 1: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 3: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 2 IN-
SPECTIONS
6,000 flight cy-
cles.
-(ACTION 2): Repeat PART
2: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-14 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) AND LOW
FREQUENCY EDDY CUR-
RENT (LFEC) INSPEC-
TIONS for any crack in areas
with no existing repair. (a)
6,000 flight cy-
cles.
-Repeat PART 2: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
14 AND INTERCOSTAL
AREAS HIGH FREQUENCY
EDDY CURRENT (HFEC)
AND LOW FREQUENCY
EDDY CURRENT (LFEC)
INSPECTIONS for any crack
in areas with no existing re-
pair. (a)
CONDITION 4: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 2 IN-
SPECTIONS
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 5: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 3 IN-
SPECTIONS
2,500 flight cy-
cles.
-(ACTION 2): Repeat PART
3: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-14 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair. (a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
17 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 18

Group 1, Configuration 1:
Table 1: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
2,500 flight cy-
cles.
-Repeat PART 3: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
14 AND INTERCOSTAL
AREAS HIGH FREQUENCY
EDDY CURRENT (HFEC)
INSPECTIONS for any crack
in areas with no existing re-
pair. (a)
CONDITION 6: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 3 IN-
SPECTIONS
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 7: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-11, S-13
OR INTERCOSTAL AR-
EAS DURING PART 4
INSPECTIONS
10,400 flight cy-
cles.
-(ACTION 2): Repeat PART
4: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-11, S-13 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
10,400 flight cy-
cles.
-Repeat PART 4: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
11, S-13 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
CONDITION 8: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-11, S-13
OR INTERCOSTAL AR-
EAS DURING PART 4
INSPECTIONS
(a) It is acceptable to change the repeat inspection method from PART 2 to PART 3, or from PART 3 to
PART 2, provided the repeat interval for the previously accomplished inspection method is complied with.
(b) CONDITION 2 applies in all areas where no existing repair was found.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
18 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 19

Group 1, Configuration 2:
Table 2: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 500 flight cycles after the
original issue date of this service
bulletin.
Inspect for any existing re-
pairs in the Body Station
(STA) 1640 fuselage frame
at stringer S-11, S-13, S-14
and lower hinge intercostal,
left and right side.
757-200 and -200CB air-
planes with 32,000 total
flight cycles or more at
the original issue date of
this service bulletin, that
have a long inner chord
strap at the Body Station
(STA) 1640 fuselage
frame.
-Before further flight.Contact The Boeing Compa-
ny for repair evaluation and
inspection instructions and
do the instructions.
CONDITION 1: ANY EX-
ISTING REPAIR FOUND
IN BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13,
S-14, OR LOWER
HINGE INTERCOSTAL
AREAS, LEFT OR
RIGHT SIDE (b)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
19 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 20

Group 1, Configuration 2:
Table 2: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 500 flight cycles after the
original issue date of this service
bulletin.
OPTION 1 (ACTION 1): Do
PART 2: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-14 AND IN-
TERCOSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) AND LOW
FREQUENCY EDDY CUR-
RENT (LFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
CONDITION 2: NO EX-
ISTING REPAIR FOUND
IN BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13,
S-14, OR LOWER
HINGE INTERCOSTAL
AREAS, LEFT OR
RIGHT SIDE
-Within 3,000 flight cycles after the
original issue date of this service
bulletin.
OPTION 1 (ACTION 2): Do
PART 4: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND
INTERCOSTAL AREAS
HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
-Within 500 flight cycles after the
original issue date of this service
bulletin.
OPTION 2 (ACTION 1): Do
PART 3: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-14 AND IN-
TERCOSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
-Within 3,000 flight cycles after the
original issue date of this service
bulletin.
OPTION 2 (ACTION 2): Do
PART 4: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND
INTERCOSTAL AREAS
HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
20 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 21

Group 1, Configuration 2:
Table 2: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 3: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 2 IN-
SPECTIONS
6,000 flight cy-
cles.
-(ACTION 2): Repeat PART
2: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-14 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) AND LOW
FREQUENCY EDDY CUR-
RENT (LFEC) INSPEC-
TIONS for any crack in areas
with no existing repair. (a)
6,000 flight cy-
cles.
-Repeat PART 2: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
14 AND INTERCOSTAL
AREAS HIGH FREQUENCY
EDDY CURRENT (HFEC)
AND LOW FREQUENCY
EDDY CURRENT (LFEC)
INSPECTIONS for any crack
in areas with no existing re-
pair. (a)
CONDITION 4: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 2 IN-
SPECTIONS
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 5: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 3 IN-
SPECTIONS
2,500 flight cy-
cles.
-(ACTION 2): Repeat PART
3: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-14 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair. (a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
21 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 22

Group 1, Configuration 2:
Table 2: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
2,500 flight cy-
cles.
-Repeat PART 3: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
14 AND INTERCOSTAL
AREAS HIGH FREQUENCY
EDDY CURRENT (HFEC)
INSPECTIONS for any crack
in areas with no existing re-
pair. (a)
CONDITION 6: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 3 IN-
SPECTIONS
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 7: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-11, S-13
OR INTERCOSTAL AR-
EAS DURING PART 4
INSPECTIONS
10,400 flight cy-
cles.
-(ACTION 2): Repeat PART
4: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-11, S-13 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
10,400 flight cy-
cles.
-Repeat PART 4: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
11, S-13 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
CONDITION 8: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-11, S-13
OR INTERCOSTAL AR-
EAS DURING PART 4
INSPECTIONS
(a) It is acceptable to change the repeat inspection method from PART 2 to PART 3, or from PART 3 to
PART 2, provided the repeat interval for the previously accomplished inspection method is complied with.
(b) CONDITION 2 applies in all areas where no existing repair was found.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
22 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 23

Group 2:
Table 3: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 500 flight cycles after the
original issue date of this service
bulletin.
Inspect for any existing re-
pairs in the Body Station
(STA) 1640 fuselage frame
at stringer S-11, S-13, S-14
and lower hinge intercostal,
left and right side.
All airplanes.
-Before further flight.Contact The Boeing Compa-
ny for repair evaluation and
inspection instructions and
do the instructions.
CONDITION 1: ANY EX-
ISTING REPAIR FOUND
IN BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13,
S-14, OR LOWER
HINGE INTERCOSTAL
AREAS, LEFT OR
RIGHT SIDE (b)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
23 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 24

Group 2:
Table 3: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 500 flight cycles after the
original issue date of this service
bulletin.
OPTION 1 (ACTION 1): Do
PART 2: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-14 AND IN-
TERCOSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) AND LOW
FREQUENCY EDDY CUR-
RENT (LFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
CONDITION 2: NO EX-
ISTING REPAIR FOUND
IN BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13,
S-14, OR LOWER
HINGE INTERCOSTAL
AREAS, LEFT OR
RIGHT SIDE
-Within 500 flight cycles after the
original issue date of this service
bulletin.
OPTION 1 (ACTION 2): Do
PART 4: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND
INTERCOSTAL AREAS
HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
-Within 500 flight cycles after the
original issue date of this service
bulletin.
OPTION 2 (ACTION 1): Do
PART 3: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-14 AND IN-
TERCOSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
-Within 500 flight cycles after the
original issue date of this service
bulletin.
OPTION 2 (ACTION 2): Do
PART 4: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND
INTERCOSTAL AREAS
HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
24 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 25

Group 2:
Table 3: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 3: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 2 IN-
SPECTIONS
2,600 flight cy-
cles.
-(ACTION 2): Repeat PART
2: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-14 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) AND LOW
FREQUENCY EDDY CUR-
RENT (LFEC) INSPEC-
TIONS for any crack in areas
with no existing repair. (a)
2,600 flight cy-
cles.
-Repeat PART 2: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
14 AND INTERCOSTAL
AREAS HIGH FREQUENCY
EDDY CURRENT (HFEC)
AND LOW FREQUENCY
EDDY CURRENT (LFEC)
INSPECTIONS for any crack
in areas with no existing re-
pair. (a)
CONDITION 4: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 2 IN-
SPECTIONS
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 5: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 3 IN-
SPECTIONS
1,900 flight cy-
cles.
-(ACTION 2): Repeat PART
3: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-14 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair. (a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
25 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 26

Group 2:
Table 3: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
1,900 flight cy-
cles.
-Repeat PART 3: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
14 AND INTERCOSTAL
AREAS HIGH FREQUENCY
EDDY CURRENT (HFEC)
INSPECTIONS for any crack
in areas with no existing re-
pair. (a)
CONDITION 6: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 3 IN-
SPECTIONS
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 7: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-11, S-13
OR INTERCOSTAL AR-
EAS DURING PART 4
INSPECTIONS
4,300 flight cy-
cles.
-(ACTION 2): Repeat PART
4: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-11, S-13 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
4,300 flight cy-
cles.
-Repeat PART 4: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
11, S-13 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
CONDITION 8: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-11, S-13
OR INTERCOSTAL AR-
EAS DURING PART 4
INSPECTIONS
(a) It is acceptable to change the repeat inspection method from PART 2 to PART 3, or from PART 3 to
PART 2, provided the repeat interval for the previously accomplished inspection method is complied with.
(b) CONDITION 2 applies in all areas where no existing repair was found.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
26 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 27

Group 3, Configuration 1:
Table 4: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,500
flight cycles after
the original issue
date of this ser-
vice bulletin, or
before 16,500 to-
tal flight cycles,
whichever oc-
curs first.
Before 10,000
total flight cycles.
Inspect for any existing re-
pairs in the Body Station
(STA) 1640 fuselage frame
at stringer S-11, S-13, S-14
and lower hinge intercostal,
left and right side.
757-300 airplanes, with
less than 16,000 total
flight cycles at the origi-
nal issue date of this
service bulletin, that
have a long inner chord
strap at STA 1640 fuse-
lage frame.
-Before further flight.Contact The Boeing Compa-
ny for repair evaluation and
inspection instructions and
do the instructions.
CONDITION 1: ANY EX-
ISTING REPAIR FOUND
IN BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13,
S-14, OR LOWER
HINGE INTERCOSTAL
AREAS, LEFT OR
RIGHT SIDE (b)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
27 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 28

Group 3, Configuration 1:
Table 4: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,500
flight cycles after
the original issue
date of this ser-
vice bulletin, or
before 16,500 to-
tal flight cycles,
whichever oc-
curs first.
Before 10,000
total flight cycles.
OPTION 1 (ACTION 1): Do
PART 2: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-14 AND IN-
TERCOSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) AND LOW
FREQUENCY EDDY CUR-
RENT (LFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
CONDITION 2: NO EX-
ISTING REPAIR FOUND
IN BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13,
S-14, OR LOWER
HINGE INTERCOSTAL
AREAS, LEFT OR
RIGHT SIDE
-Within 3,000
flight cycles after
the original issue
date of this ser-
vice bulletin.
Before 17,500
total flight cycles.
OPTION 1 (ACTION 2): Do
PART 4: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND
INTERCOSTAL AREAS
HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
-Within 1,500
flight cycles after
the original issue
date of this ser-
vice bulletin, or
before 16,500 to-
tal flight cycles,
whichever oc-
curs first.
Before 10,000
total flight cycles.
OPTION 2 (ACTION 1): Do
PART 3: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-14 AND IN-
TERCOSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
-Within 3,000
flight cycles after
the original issue
date of this ser-
vice bulletin.
Before 17,500
total flight cycles.
OPTION 2 (ACTION 2): Do
PART 4: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND
INTERCOSTAL AREAS
HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
28 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 29

Group 3, Configuration 1:
Table 4: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 3: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 2 IN-
SPECTIONS
3,200 flight cy-
cles.
-(ACTION 2): Repeat PART
2: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-14 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) AND LOW
FREQUENCY EDDY CUR-
RENT (LFEC) INSPEC-
TIONS for any crack in areas
with no existing repair. (a)
3,200 flight cy-
cles.
-Repeat PART 2: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
14 AND INTERCOSTAL
AREAS HIGH FREQUENCY
EDDY CURRENT (HFEC)
AND LOW FREQUENCY
EDDY CURRENT (LFEC)
INSPECTIONS for any crack
in areas with no existing re-
pair. (a)
CONDITION 4: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 2 IN-
SPECTIONS
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 5: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 3 IN-
SPECTIONS
2,400 flight cy-
cles.
-(ACTION 2): Repeat PART
3: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-14 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair. (a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
29 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 30

Group 3, Configuration 1:
Table 4: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
2,400 flight cy-
cles.
-Repeat PART 3: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
14 AND INTERCOSTAL
AREAS HIGH FREQUENCY
EDDY CURRENT (HFEC)
INSPECTIONS for any crack
in areas with no existing re-
pair. (a)
CONDITION 6: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 3 IN-
SPECTIONS
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 7: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-11, S-13
OR INTERCOSTAL AR-
EAS DURING PART 4
INSPECTIONS
5,300 flight cy-
cles.
-(ACTION 2): Repeat PART
4: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-11, S-13 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
5,300 flight cy-
cles.
-Repeat PART 4: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
11, S-13 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
CONDITION 8: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-11, S-13
OR INTERCOSTAL AR-
EAS DURING PART 4
INSPECTIONS
(a) It is acceptable to change the repeat inspection method from PART 2 to PART 3, or from PART 3 to
PART 2, provided the repeat interval for the previously accomplished inspection method is complied with.
(b) CONDITION 2 applies in all areas where no existing repair was found.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
30 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 31

Group 3, Configuration 2:
Table 5: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 500 flight cycles after the
original issue date of this service
bulletin.
Inspect for any existing re-
pairs in the Body Station
(STA) 1640 fuselage frame
at stringer S-11, S-13, S-14
and lower hinge intercostal,
left and right side.
757-300 airplanes, with
16,000 total flight cycles
or more at the original is-
sue date of this service
bulletin, that have a long
inner chord strap at STA
1640 fuselage frame.
-Before further flight.Contact The Boeing Compa-
ny for repair evaluation and
inspection instructions and
do the instructions.
CONDITION 1: ANY EX-
ISTING REPAIR FOUND
IN BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13,
S-14, OR LOWER
HINGE INTERCOSTAL
AREAS, LEFT OR
RIGHT SIDE (b)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
31 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 32

Group 3, Configuration 2:
Table 5: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 500 flight cycles after the
original issue date of this service
bulletin.
OPTION 1 (ACTION 1): Do
PART 2: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-14 AND IN-
TERCOSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) AND LOW
FREQUENCY EDDY CUR-
RENT (LFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
CONDITION 2: NO EX-
ISTING REPAIR FOUND
IN BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13,
S-14, OR LOWER
HINGE INTERCOSTAL
AREAS, LEFT OR
RIGHT SIDE
-Within 3,000 flight cycles after the
original issue date of this service
bulletin.
OPTION 1 (ACTION 2): Do
PART 4: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND
INTERCOSTAL AREAS
HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
-Within 500 flight cycles after the
original issue date of this service
bulletin.
OPTION 2 (ACTION 1): Do
PART 3: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-14 AND IN-
TERCOSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
-Within 3,000 flight cycles after the
original issue date of this service
bulletin.
OPTION 2 (ACTION 2): Do
PART 4: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND
INTERCOSTAL AREAS
HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
32 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 33

Group 3, Configuration 2:
Table 5: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 3: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 2 IN-
SPECTIONS
3,200 flight cy-
cles.
-(ACTION 2): Repeat PART
2: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-14 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) AND LOW
FREQUENCY EDDY CUR-
RENT (LFEC) INSPEC-
TIONS for any crack in areas
with no existing repair. (a)
3,200 flight cy-
cles.
-Repeat PART 2: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
14 AND INTERCOSTAL
AREAS HIGH FREQUENCY
EDDY CURRENT (HFEC)
AND LOW FREQUENCY
EDDY CURRENT (LFEC)
INSPECTIONS for any crack
in areas with no existing re-
pair. (a)
CONDITION 4: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 2 IN-
SPECTIONS
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 5: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 3 IN-
SPECTIONS
2,400 flight cy-
cles.
-(ACTION 2): Repeat PART
3: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-14 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair. (a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
33 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 34

Group 3, Configuration 2:
Table 5: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
2,400 flight cy-
cles.
-Repeat PART 3: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
14 AND INTERCOSTAL
AREAS HIGH FREQUENCY
EDDY CURRENT (HFEC)
INSPECTIONS for any crack
in areas with no existing re-
pair. (a)
CONDITION 6: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 3 IN-
SPECTIONS
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 7: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-11, S-13
OR INTERCOSTAL AR-
EAS DURING PART 4
INSPECTIONS
5,300 flight cy-
cles.
-(ACTION 2): Repeat PART
4: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-11, S-13 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
5,300 flight cy-
cles.
-Repeat PART 4: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
11, S-13 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
CONDITION 8: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-11, S-13
OR INTERCOSTAL AR-
EAS DURING PART 4
INSPECTIONS
(a) It is acceptable to change the repeat inspection method from PART 2 to PART 3, or from PART 3 to
PART 2, provided the repeat interval for the previously accomplished inspection method is complied with.
(b) CONDITION 2 applies in all areas where no existing repair was found.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
34 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 35

Group 4:
Table 6: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 500 flight cycles after the
original issue date of this service
bulletin.
Inspect for any existing re-
pairs in the Body Station
(STA) 1640 fuselage frame
at stringer S-11, S-13, S-14
and lower hinge intercostal,
left and right side.
All airplanes.
-Before further flight.Contact The Boeing Compa-
ny for repair evaluation and
inspection instructions and
do the instructions.
CONDITION 1: ANY EX-
ISTING REPAIR FOUND
IN BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13,
S-14, OR LOWER
HINGE INTERCOSTAL
AREAS, LEFT OR
RIGHT SIDE (b)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
35 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 36

Group 4:
Table 6: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 500 flight cycles after the
original issue date of this service
bulletin.
OPTION 1 (ACTION 1): Do
PART 2: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-14 AND IN-
TERCOSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) AND LOW
FREQUENCY EDDY CUR-
RENT (LFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
CONDITION 2: NO EX-
ISTING REPAIR FOUND
IN BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13,
S-14, OR LOWER
HINGE INTERCOSTAL
AREAS, LEFT OR
RIGHT SIDE
-Within 500 flight cycles after the
original issue date of this service
bulletin.
OPTION 1 (ACTION 2): Do
PART 4: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND
INTERCOSTAL AREAS
HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
-Within 500 flight cycles after the
original issue date of this service
bulletin.
OPTION 2 (ACTION 1): Do
PART 3: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-14 AND IN-
TERCOSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
-Within 500 flight cycles after the
original issue date of this service
bulletin.
OPTION 2 (ACTION 2): Do
PART 4: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND
INTERCOSTAL AREAS
HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
36 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 37

Group 4:
Table 6: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 3: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 2 IN-
SPECTIONS
4,300 flight cy-
cles.
-(ACTION 2): Repeat PART
2: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-14 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) AND LOW
FREQUENCY EDDY CUR-
RENT (LFEC) INSPEC-
TIONS for any crack in areas
with no existing repair. (a)
4,300 flight cy-
cles.
-Repeat PART 2: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
14 AND INTERCOSTAL
AREAS HIGH FREQUENCY
EDDY CURRENT (HFEC)
AND LOW FREQUENCY
EDDY CURRENT (LFEC)
INSPECTIONS for any crack
in areas with no existing re-
pair. (a)
CONDITION 4: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 2 IN-
SPECTIONS
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 5: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 3 IN-
SPECTIONS
2,500 flight cy-
cles.
-(ACTION 2): Repeat PART
3: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-14 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair. (a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
37 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 38

Group 4:
Table 6: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
2,500 flight cy-
cles.
-Repeat PART 3: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
14 AND INTERCOSTAL
AREAS HIGH FREQUENCY
EDDY CURRENT (HFEC)
INSPECTIONS for any crack
in areas with no existing re-
pair. (a)
CONDITION 6: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 3 IN-
SPECTIONS
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 7: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-11, S-13
OR INTERCOSTAL AR-
EAS DURING PART 4
INSPECTIONS
6,500 flight cy-
cles.
-(ACTION 2): Repeat PART
4: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-11, S-13 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
6,500 flight cy-
cles.
-Repeat PART 4: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
11, S-13 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
CONDITION 8: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-11, S-13
OR INTERCOSTAL AR-
EAS DURING PART 4
INSPECTIONS
(a) It is acceptable to change the repeat inspection method from PART 2 to PART 3, or from PART 3 to
PART 2, provided the repeat interval for the previously accomplished inspection method is complied with.
(b) CONDITION 2 applies in all areas where no existing repair was found.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
38 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 39

Group 5:
Table 7: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 500 flight cycles after the
original issue date of this service
bulletin.
Inspect for any existing re-
pairs in the Body Station
(STA) 1640 fuselage frame
at stringer S-11, S-13, S-14
and lower hinge intercostal,
left and right side.
All airplanes.
-Before further flight.Contact The Boeing Compa-
ny for repair evaluation and
inspection instructions and
do the instructions.
CONDITION 1: ANY EX-
ISTING REPAIR FOUND
IN BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13,
S-14, OR LOWER
HINGE INTERCOSTAL
AREAS, LEFT OR
RIGHT SIDE (b)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
39 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 40

Group 5:
Table 7: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 500 flight cycles after the
original issue date of this service
bulletin.
OPTION 1 (ACTION 1): Do
PART 2: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-14 AND IN-
TERCOSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) AND LOW
FREQUENCY EDDY CUR-
RENT (LFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
CONDITION 2: NO EX-
ISTING REPAIR FOUND
IN BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13,
S-14, OR LOWER
HINGE INTERCOSTAL
AREAS, LEFT OR
RIGHT SIDE
-Within 500 flight cycles after the
original issue date of this service
bulletin.
OPTION 1 (ACTION 2): Do
PART 4: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND
INTERCOSTAL AREAS
HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
-Within 500 flight cycles after the
original issue date of this service
bulletin.
OPTION 2 (ACTION 1): Do
PART 3: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-14 AND IN-
TERCOSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
-Within 500 flight cycles after the
original issue date of this service
bulletin.
OPTION 2 (ACTION 2): Do
PART 4: BODY STATION
(STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND
INTERCOSTAL AREAS
HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
40 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 41

Group 5:
Table 7: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 3: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 2 IN-
SPECTIONS
2,100 flight cy-
cles.
-(ACTION 2): Repeat PART
2: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-14 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) AND LOW
FREQUENCY EDDY CUR-
RENT (LFEC) INSPEC-
TIONS for any crack in areas
with no existing repair. (a)
2,100 flight cy-
cles.
-Repeat PART 2: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
14 AND INTERCOSTAL
AREAS HIGH FREQUENCY
EDDY CURRENT (HFEC)
AND LOW FREQUENCY
EDDY CURRENT (LFEC)
INSPECTIONS for any crack
in areas with no existing re-
pair. (a)
CONDITION 4: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 2 IN-
SPECTIONS
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 5: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 3 IN-
SPECTIONS
1,800 flight cy-
cles.
-(ACTION 2): Repeat PART
3: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-14 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair. (a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
41 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 42

Group 5:
Table 7: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections
for any crack in the Body Station (STA) 1640 fuselage frame, between Stringers S-11 and S-14, left and
right side
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
1,800 flight cy-
cles.
-Repeat PART 3: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
14 AND INTERCOSTAL
AREAS HIGH FREQUENCY
EDDY CURRENT (HFEC)
INSPECTIONS for any crack
in areas with no existing re-
pair. (a)
CONDITION 6: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-14 OR IN-
TERCOSTAL AREAS
DURING PART 3 IN-
SPECTIONS
-Before further flight.(ACTION 1): Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 7: ANY
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-11, S-13
OR INTERCOSTAL AR-
EAS DURING PART 4
INSPECTIONS
3,000 flight cy-
cles.
-(ACTION 2): Repeat PART
4: BODY STATION (STA)
1640 FUSELAGE FRAME
AT S-11, S-13 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
3,000 flight cy-
cles.
-Repeat PART 4: BODY
STATION (STA) 1640
FUSELAGE FRAME AT S-
11, S-13 AND INTER-
COSTAL AREAS HIGH
FREQUENCY EDDY CUR-
RENT (HFEC) INSPEC-
TIONS for any crack in areas
with no existing repair.
CONDITION 8: NO
CRACK FOUND IN
BODY STATION (STA)
1640 FUSELAGE
FRAME AT S-11, S-13
OR INTERCOSTAL AR-
EAS DURING PART 4
INSPECTIONS
(a) It is acceptable to change the repeat inspection method from PART 2 to PART 3, or from PART 3 to
PART 2, provided the repeat interval for the previously accomplished inspection method is complied with.
(b) CONDITION 2 applies in all areas where no existing repair was found.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
42 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 43

F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
The Manager of the FAA Los Angeles Aircraft Certification Office approves the actions (i.e. inspections)
defined in this service bulletin as an Alternate Method of Compliance (AMOC) to the requirements of
paragraph (h) of AD 2006-11-11 for the Stringer 14 area inner chord and inner chord strap inspections
of SSI 53-60-15 [No. 4 Passenger Door Cutout Forward Frame Inner Chord BS 1640 S-14 to S-17 L
& R] listed in Section 9 of the Maintenance Planning Data (MPD) Document, D622N001-9. This AMOC
only applies to the stringer 14 area structural inspections common to the frame inner chord and inner
chord strap at STA 1640 only. All provisions of AD 2006-11-11 that are not specifically referenced in
the above statement remain fully applicable and must be complied with. Therefore, operators may
revise their FAA-approved maintenance or inspection program with these alternate inspections for
common areas. If an airplane has a non-Boeing modification or repair that affects a component or
system also affected by this service bulletin, the operator is responsible for obtaining appropriate
regulatory agency approval before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do these inspections for each
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with
operator task hour data if necessary. The estimate does not include lost time. These are some examples
of lost time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools
Group 1-3:
Elapsed HoursTask HoursNumber of PersonsTask
8.5017.002Open Access
1.352.702FIGURE 1
1.352.702FIGURE 2
0.501.002FIGURE 3
0.501.002FIGURE 4
1.503.002FIGURE 5
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
43 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 44

Group 1-3:
Elapsed HoursTask HoursNumber of PersonsTask
1.503.002FIGURE 6
8.5017.002Close Access
23.7047.40TOTAL FOR EACH AIRPLANE
Group 4-5:
Elapsed HoursTask HoursNumber of PersonsTask
8.5017.002Open Access
1.002.002FIGURE 7
1.002.002FIGURE 8
0.501.002FIGURE 9
0.501.002FIGURE 10
0.501.002FIGURE 11
0.501.002FIGURE 12
0.501.002Close Access
21.0042.00TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Boeing Service Letter 757-SL-51-022
b. Boeing Service Related Problem (SRP) 757-SRP-53-0525
c. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2006-11-11
d. Service Bulletin Index D624N001
e. Standard Overhaul Practices Manual (SOPM) 20-50-01
f. 757 Aircraft Maintenance Manual (AMM) 25-21-05, 25-21-06, 25-25-01, 25-25-02, 25-31-04,
25-41-04
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
44 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 45

g. 757 Fleet Team Digest (FTD) 53-16001
h. 757 Non-Destructive Testing (NDT) Manual Part 6, 51-00-19, Part 6, 51-00-23
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
FWD FRAME INSTL - STA 1640.00 NO. 4 PASSENGER DOOR146N8711
FWD INTERCOSTAL INSTL - STOP NO. 3, NO. 4 PASSENGER
DOOR C/O
146N8733
FWD INTERCOSTAL INSTL STOP NO. 4, NO. 4 PASSENGER
DOOR C/O
146N8734
FWD INTERCOSTAL INSTL - STOP NO. 5, NO. 4 PASSENGER
DOOR CUTOUT
146N8735
FWD INTERCOSTAL INSTL - LOWER HINGE SUPPORT, NO. 4
PASSENGER DOOR CUTOUT
146N8739
FRAME INSTL- MODIFIED, AFT PALLET , MOD657N3160
The table above lists applicable drawings used to prepare this service bulletin. These drawings
are not necessary to make the specified changes, and are not supplied with this service bulletin.
These drawings may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS but no new DTIs are necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
45 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 46

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
46 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT
BLANK PAGE

### Page 47

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the inspections given in this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
None.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
47 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 48

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
48 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT
BLANK PAGE

### Page 49

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. The work instructions are divided into work packages. Task Hours and Elapsed Hours
for each package are given in Paragraph 1.G., Manpower. You can do each work
package independently.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 757 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 757
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 757
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
5. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
6. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate
full threaded fasteners (screws) needed for installation in this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
49 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 50

7. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
8. Boeing Service Letter 757-SL-51-022, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
9. Refer to Appendix A, B, C, D, E, F and G for logic diagram(s). Logic diagrams are
provided as an aid only. Information contained in Paragraph 1.E., Compliance is the
primary source for compliance times. Information in Paragraph 3.B., Work Instructions
is the primary source for tasks required for compliance.
10. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
11. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
12. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
13. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
14. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an
OPTION number, do all of the ACTION numbers for that CONDITION number or
OPTION number.
15. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
16. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. If a step or sub-step is labeled
"RC Exempt," then the RC requirement is removed from that step or sub-step. An
Alternative Method of Compliance (AMOC) is required for any deviations to RC steps,
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
50 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 51

including sub-steps and identified figures. Steps not labeled as RC may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC. This is provided that
the RC steps, including sub-steps and identified figures, can still be done as specified,
and the airplane can be put back in an airworthy condition.
B. WORK INSTRUCTIONS
1. Do PART 1: OPEN ACCESS.
2. RC - Inspect for any existing repairs in the Body Station (STA) 1640 fuselage frame at stringer
S-11, S-13, S-14 and lower hinge intercostal, left and right side.
a. CONDITION 1: ANY EXISTING REPAIR FOUND IN BODY STATION (STA) 1640 FUSELAGE
FRAME AT S-11, S-13, S-14, OR LOWER HINGE INTERCOSTAL AREAS, LEFT OR RIGHT
SIDE.
NOTE: CONDITION 2 still applies at all locations where no existing repair was found.
(1) Contact The Boeing Company for repair evaluation and inspection instructions and do
the instructions.
b. CONDITION 2: NO EXISTING REPAIR FOUND IN BODY STATION (STA) 1640 FUSELAGE
FRAME AT S-11, S-13, S-14 OR LOWER HINGE INTERCOSTAL AREAS, LEFT OR RIGHT
SIDE.
(1) Do one of the following options:
(a) OPTION 1 (ACTION 1): Do PART 2: BODY STATION (STA) 1640 FUSELAGE
FRAME AT S-14 AND INTERCOSTAL AREAS HIGH FREQUENCY EDDY CURRENT
(HFEC) AND LOW FREQUENCY EDDY CURRENT (LFEC) INSPECTIONS for any
crack in areas with no existing repair.
1) CONDITION 3: ANY CRACK FOUND IN BODY STATION (STA) 1640
FUSELAGE FRAME AT S-14 OR INTERCOSTAL AREAS DURING PART 2
INSPECTIONS.
a) (ACTION 1): Contact The Boeing Company for repair instructions and do
the repair.
b) (ACTION 2): Repeat PART 2: BODY STATION (STA) 1640 FUSELAGE
FRAME AT S-14 AND INTERCOSTAL AREAS HIGH FREQUENCY EDDY
CURRENT (HFEC) AND LOW FREQUENCY EDDY CURRENT (LFEC)
INSPECTIONS for any crack in areas with no existing repair, in accordance
with the repeat interval given in Paragraph 1.E., Compliance.
NOTE: It is acceptable to change the repeat inspection method from PART
2 to PART 3, or from PART 3 to PART 2, provided the repeat
interval for the previously accomplished inspection method is
complied with.
2) CONDITION 4: NO CRACK FOUND IN BODY STATION (STA) 1640 FUSELAGE
FRAME AT S-14 OR INTERCOSTAL AREAS DURING PART 2 INSPECTIONS.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
51 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 52

a) Repeat PART 2: BODY STATION (STA) 1640 FUSELAGE FRAME AT
S-14 AND INTERCOSTAL AREAS HIGH FREQUENCY EDDY CURRENT
(HFEC) AND LOW FREQUENCY EDDY CURRENT (LFEC) INSPECTIONS
for any crack in areas with no existing repair in accordance with the repeat
interval given in Paragraph 1.E., Compliance.
NOTE: It is acceptable to change the repeat inspection method from PART
2 to PART 3, or from PART 3 to PART 2, provided the repeat
interval for the previously accomplished inspection method is
complied with.
(b) OPTION 1 (ACTION 2): Do PART 4: BODY STATION (STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND INTERCOSTAL AREAS HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPECTIONS for any crack in areas with no existing repair.
1) CONDITION 7: ANY CRACK FOUND IN BODY STATION (STA) 1640
FUSELAGE FRAME AT S-11, S-13 OR INTERCOSTAL AREAS DURING PART
4 INSPECTIONS.
a) (ACTION 1): Contact The Boeing Company for repair instructions and do
the repair.
b) (ACTION 2): Repeat PART 4: BODY STATION (STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND INTERCOSTAL AREAS HIGH FREQUENCY
EDDY CURRENT (HFEC) INSPECTIONS for any crack in areas with no
existing repair, in accordance with the repeat interval given in Paragraph
1.E., Compliance.
2) CONDITION 8: NO CRACK FOUND IN BODY STATION (STA) 1640 FUSELAGE
FRAME AT S-11, S-13 OR INTERCOSTAL AREAS DURING PART 4
INSPECTIONS.
a) Repeat PART 4: BODY STATION (STA) 1640 FUSELAGE FRAME AT
S-11, S-13 AND INTERCOSTAL AREAS HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPECTIONS for any crack in areas with no existing
repair, in accordance with the repeat interval given in Paragraph 1.E.,
Compliance..
(c) OPTION 2 (ACTION 1): Do PART 3: BODY STATION (STA) 1640 FUSELAGE
FRAME AT S-14 AND INTERCOSTAL AREAS HIGH FREQUENCY EDDY CURRENT
(HFEC) INSPECTIONS for any crack in areas with no existing repair.
1) CONDITION 5: ANY CRACK FOUND IN BODY STATION (STA) 1640
FUSELAGE FRAME AT S-14 OR INTERCOSTAL AREAS DURING PART 3
INSPECTIONS.
a) (ACTION 1): Contact The Boeing Company for repair instructions and do
the repair.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
52 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 53

b) (ACTION 2): Repeat PART 3: BODY STATION (STA) 1640 FUSELAGE
FRAME AT S-14 AND INTERCOSTAL AREAS HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPECTIONS for any crack in areas with no existing
repair, in accordance with the repeat interval given in Paragraph 1.E.,
Compliance.
NOTE: It is acceptable to change the repeat inspection method from PART
2 to PART 3, or from PART 3 to PART 2, provided the repeat
interval for the previously accomplished inspection method is
complied with.
2) CONDITION 6: NO CRACK FOUND IN BODY STATION (STA) 1640 FUSELAGE
FRAME AT S-14 OR INTERCOSTAL AREAS DURING PART 3 INSPECTIONS.
a) Repeat PART 3: BODY STATION (STA) 1640 FUSELAGE FRAME AT
S-14 AND INTERCOSTAL AREAS HIGH FREQUENCY EDDY CURRENT
(HFEC) INSPECTIONS for any crack in areas with no existing repair in
accordance with the repeat interval given in Paragraph 1.E., Compliance.
NOTE: It is acceptable to change the repeat inspection method from PART
2 to PART 3, or from PART 3 to PART 2, provided the repeat
interval for the previously accomplished inspection method is
complied with.
(d) OPTION 2 (ACTION 2): Do PART 4: BODY STATION (STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND INTERCOSTAL AREAS HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPECTIONS for any crack in areas with no existing repair.
1) CONDITION 7: ANY CRACK FOUND IN BODY STATION (STA) 1640
FUSELAGE FRAME AT S-11, S-13 OR INTERCOSTAL AREAS DURING PART
4 INSPECTIONS.
a) (ACTION 1): Contact The Boeing Company for repair instructions and do
the repair.
b) (ACTION 2): Repeat PART 4: BODY STATION (STA) 1640 FUSELAGE
FRAME AT S-11, S-13 AND INTERCOSTAL AREAS HIGH FREQUENCY
EDDY CURRENT (HFEC) INSPECTIONS for any crack in areas with no
existing repair, in accordance with the repeat interval given in Paragraph
1.E., Compliance.
2) CONDITION 8: NO CRACK FOUND IN BODY STATION (STA) 1640 FUSELAGE
FRAME AT S-11, S-13 OR INTERCOSTAL AREAS DURING PART 4
INSPECTIONS.
a) Repeat PART 4: BODY STATION (STA) 1640 FUSELAGE FRAME AT
S-11, S-13 AND INTERCOSTAL AREAS HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPECTIONS for any crack in areas with no existing
repair in accordance with the repeat interval given in Paragraph 1.E.,
Compliance.
3. Do PART 5: CLOSE ACCESS.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
53 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 54

4. Put the airplane back to a serviceable condition.
PART 1: OPEN ACCESS
1. Get access to the STA 1640 fuselage frame as follows:
a. Remove and keep the Doorway Lining. Refer to 757 AMM 25-21-06 as an accepted procedure.
b. Remove and keep the Sidewall Insulation. Refer to 757 AMM 25-21-05 as an accepted
procedure.
c. Remove and keep the Aft Lavatory. Refer to 757 AMM 25-41-04 as an accepted procedure.
d. Remove and keep the Aft Galley. Refer to 757 AMM 25-31-04 as an accepted procedure.
e. Remove and keep the Passenger Seats and Attendant Seats. Refer to 757 AMM 25-25-01
and 757 AMM 25-25-02 as an accepted procedure.
PART 2: BODY STATION (STA) 1640 FUSELAGE FRAME AT S-14 AND INTERCOSTAL AREAS
HIGH FREQUENCY EDDY CURRENT (HFEC) AND LOW FREQUENCY EDDY CURRENT (LFEC)
INSPECTIONS
1. Group 1-3:
Do a HFEC and LFEC inspection of the left side STA 1640 fuselage frame at stringer S-14 and
the lower hinge intercostal areas for any crack, in accordance with FIGURE 1.
2. Group 1-3:
Do a HFEC and LFEC inspection of the right side STA 1640 fuselage frame at stringer S-14 and
the lower hinge intercostal areas for any crack, in accordance with FIGURE 2.
3. Group 4-5:
Do a HFEC and LFEC inspection of the left side STA 1640 fuselage frame at stringer S-14
intercostal area for any crack, in accordance with FIGURE 7.
4. Group 4-5:
Do a HFEC and LFEC inspection of the right side STA 1640 fuselage frame at stringer S-14
intercostal area for any crack, in accordance with FIGURE 8.
PART 3: BODY STATION (STA) 1640 FUSELAGE FRAME AT S-14 AND INTERCOSTAL AREAS
HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTIONS
1. Group 1-3:
Do a HFEC inspection of the left side STA 1640 fuselage frame at stringer S-14 and the lower
hinge intercostal areas for any crack, in accordance with FIGURE 3.
2. Group 1-3:
Do a HFEC inspection of the right side STA 1640 fuselage frame at stringer S-14 and the lower
hinge intercostal areas for any crack, in accordance with FIGURE 4.
3. Group 4-5:
Do a HFEC inspection of the left side STA 1640 fuselage frame at stringer S-14 intercostal area
for any crack, in accordance with FIGURE 9.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
54 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 55

4. Group 4-5:
Do a HFEC inspection of the right side STA 1640 fuselage frame at stringer S-14 intercostal area
for any crack, in accordance with FIGURE 10.
PART 4: BODY STATION (STA) 1640 FUSELAGE FRAME AT S-11, S-13 AND INTERCOSTAL
AREAS HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTIONS
1. Group 1-3:
Do a HFEC inspection of the left side STA 1640 fuselage frame at stringers S-11 and S-13
intercostal areas for any crack, in accordance with FIGURE 5.
2. Group 1-3:
Do a HFEC inspection of the right side STA 1640 fuselage frame at stringers S-11 and S-13
intercostal areas for any crack, in accordance with FIGURE 6.
3. Group 4-5:
Do a HFEC inspection of the left side STA 1640 fuselage frame at stringers S-11 and S-13 and
the lower hinge intercostal areas for any crack, in accordance with FIGURE 11.
4. Group 4-5:
Do a HFEC inspection of the right side STA 1640 fuselage frame at stringers S-11 and S-13 and
the lower hinge intercostal areas for any crack, in accordance with FIGURE 12.
PART 5: CLOSE ACCESS
1. Close access to the STA 1640 fuselage frame as follows:
a. Install kept Passenger Seats and Attendant Seats. Refer to 757 AMM 25-25-01 and 757 AMM
25-25-02 as an accepted procedure.
b. Install kept Aft Galley. Refer to 757 AMM 25-31-04 as an accepted procedure.
c. Install kept Aft Lavatory. Refer to 757 AMM 25-41-04 as an accepted procedure.
d. Install kept Sidewall Insulation. Refer to 757 AMM 25-21-05 as an accepted procedure.
e. Install kept Doorway Lining. Refer to 757 AMM 25-21-06 as an accepted procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
55 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 56 (OCR)

BOEING SERVICE BULLETIN 757-53A0108
ALERT  ALERT
This Figure applies only to: Group 1-3.
STA
1640
STA
1620
......  ....
- S-8
Megagoo
..0  • S-10
S-11
- S-13
60000000  LOWER
HINGE
INTERCOSTAL
- S-14
- S-16
WD  2520757
FIGURE 1: LEFT SIDE - STA 1640 FUSELAGE FRAME AT STRINGER S-14 AND LOWER HINGE
INTERCOSTAL - HFEC AND LFEC INSPECTION
(SHEET 1 OF 4)
Original Issue: November 14, 2016
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  757-53A0108
Work - See page 1 for details.  56 of 132

### Page 57 (OCR)

BOEING SERVICE BULLETIN 757-53A0108
ALERT  ALERT
INNER CHORD
STRAP  INNER CHORD
STRAP
FRAME
FRAME
INTERCOSTAL
STRAP
INTERCOSTAL
STRAP
TYPICAL
0.08.
WD
B-B
LFEC INSPECTION AREA  OMITTED FOR CLARITY  SOME PARTS
HFEC INSPECTION AREA  A-A  2520749
FIGURE 1: LEFT SIDE - STA 1640 FUSELAGE FRAME AT STRINGER S-14 AND LOWER HINGE
INTERCOSTAL - HFEC AND LFEC INSPECTION
(SHEET 2 OF 4)
Original Issue: November 14, 2016
Export Controlled ECCN: 9E991 - BOEING  757-53A0108
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  57 of 132

### Page 58 (OCR)

BOEING SERVICE BULLETIN 757-53A0108
ALERT  ALERT
INNER CHORD
STRAP  INNER CHORD
STRAP
FRAME
FRAME
INTERCOSTAL
STRAP
INTERCOSTAL
STRAP
TYPICAL
C
0.08
SOME PARTS
OMITTED FOR CLARITY
A-A
LFEC INSPECTION AREA
HFEC INSPECTION AREA  2537196
FIGURE 1: LEFT SIDE - STA 1640 FUSELAGE FRAME AT STRINGER S-14 AND LOWER HINGE
INTERCOSTAL - HFEC AND LFEC INSPECTION
(SHEET 3 OF 4)
Original Issue: November 14, 2016
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  757-53A0108
Work - See page 1 for details.  58 of 132

### Page 59

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
More DataQtyIdentificationNameTaskStep
(a)--Fuselage Frame Inner
Chord
Inspect1
(b)--Fuselage Frame Inner
Chord
Inspect2
(c)--Fuselage Frame Inner
Chord
Inspect3
(a) Do a High Frequency Eddy Current (HFEC) inspection for any crack in the fuselage frame inner chord
forward bend radius, between two fasteners above and below the edges of the intercostal strap, in accor-
dance with 757 NDT Manual Part 6, 51-00-19.
(b) Do a Low Frequency Eddy Current (LFEC) inspection for any crack in the fuselage frame inner chord,
through the inner chord strap, around the forward sides of the fasteners, between two fasteners above
and below the edges of the intercostal strap, in accordance with 757 NDT Manual Part 6, 51-00-23. The
frame thickness is 0.08 inch and the inner chord strap thickness is 0.045 inch.
(c) Do a Low Frequency Eddy Current (LFEC) inspection for any crack in the fuselage frame inner chord,
through the inner chord strap, around the forward side of the fastener, in accordance with 757 NDT
Manual Part 6, 51-00-23. The frame thickness is 0.08 inch and the inner chord strap thickness is 0.045
inch.
FIGURE 1: LEFT SIDE - STA 1640 FUSELAGE FRAME AT STRINGER S-14 AND LOWER HINGE
INTERCOSTAL - HFEC AND LFEC INSPECTION
(SHEET 4 OF 4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 14, 2016
757-53A0108
59 of 132
BOEING SERVICE BULLETIN 757-53A0108
ALERTALERT

### Page 60 (OCR)

BOEING SERVICE BULLETIN 757-53A0108
ALERT  ALERT
This Figure applies only to: Group 1-3.
STA
1640
STA
1620
S-8 -
S-10
LOWER
HINGE  S-13
INTERCOSTAL
S-14
S-16
FWD  2522049
FIGURE 2: RIGHT SIDE - STA 1640 FUSELAGE FRAME AT STRINGER S-14 AND LOWER HINGE
INTERCOSTAL - HFEC AND LFEC INSPECTION
(SHEET 1 OF 4)
Original Issue: November 14, 2016
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  757-53A0108
Work - See page 1 for details.  60 of 132

The text continues at https://openairdocs.org/service-documents/boeing/757-53a0108/file/af90923806f7.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
