# Boeing Alert Requirements Bulletin 757-53A0112 RB: 757-53A0112-00 RB

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2019-0437; AD 2019-23-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Requirements Bulletin 757-53A0112 RB](https://openairdocs.org/service-documents/boeing/757-53a0112-rb.md)
- Title as filed: 757-53A0112-00 RB
- Pages: 76
- PDF: https://openairdocs.org/files/sha256/fb/04/fb0410d5b27ba010f38df42fb725038f6def53bd7f59699dab085940cb16f4f5
- Page: https://openairdocs.org/service-documents/boeing/757-53a0112-rb/file/fb0410d5b27b

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
757
Requirements Bulletin
ALERT
Number: 757-53A0112 RB
Original Issue: November 16, 2018
ATA System: 5360
SUBJECT: FUSELAGE - Section 46 - Inspection of Station 1640 Fuselage Frame Web at S-14
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
Copyright © 2018 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: November 16, 2018
757-53A0112 RB
1 of 76
2.0

### Page 2

Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
2 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
1. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
A. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
B. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
5. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
A. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
B. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
FIGURE 1: LEFT SIDE - BODY STATION (STA) 1640 FUSELAGE FRAME GENERAL VISUAL INSPECTION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
FIGURE 2: RIGHT SIDE - BODY STATION (STA) 1640 FUSELAGE FRAME GENERAL VISUAL
INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
FIGURE 3: LEFT SIDE - BODY STATION (STA) 1640 FUSELAGE FRAME OPEN HOLE HFEC INSPECTION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
FIGURE 4: RIGHT SIDE - BODY STATION (STA) 1640 FUSELAGE FRAME OPEN HOLE HFEC
INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
FIGURE 5: LEFT SIDE - BODY STATION (STA) 1640 FUSELAGE FRAME FASTENER RE-INSTALLATION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
FIGURE 6: RIGHT SIDE - BODY STATION (STA) 1640 FUSELAGE FRAME FASTENER RE-INSTALLATION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
3 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
4 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
757
Requirements Bulletin
ALERT
Number: 757-53A0112 RB
Original Issue: November 16, 2018
ATA System: 5360
SUBJECT: FUSELAGE - Section 46 - Inspection of Station 1640 Fuselage Frame Web at S-14
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING
PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN
(RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL
TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB
WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
1. EFFECTIVITY
A. Airplanes
This bulletin is applicable to 757-200, 757-200CB, 757-300 Airplane(s), line number(s) 1-138, 140,
142, 144-146, 148, 150-175, 177-180, 182-183, 185, 187-188, 190, 192, 194, 196, 198, 200-236,
238-257, 259-299, 301-313, 315-317, 319-321, 323-325, 327-329, 331-333, 335-339, 341-394, 396-398,
400-402, 404-406, 408-410, 412-476, 478-480, 482-484, 486-488, 490-492, 494-568, 570-572, 574-576,
578, 580, 582-624, 626-627, 629-630, 632-633, 635, 637, 639, 641, 643, 645, 647-648, 650, 652-653,
655, 657-658, 660-674, 676-678, 680-682, 684-686, 688-690, 692-727, 731-732, 735-754, 756-758,
760-762, 764, 766, 768, 770, 772-773, 775, 777, 779-812, 814, 816-822, 824-878, 880-881, 883-1050
in 5 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane
applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9
inclusive.
DESCRIPTIONCONFIGURATIONGROUP
757-200 and -200CB airplanes that have a long inner chord strap at
the Body Station (STA) 1640 fuselage frame. Line numbers 45 and
subsequent .
-1
757-200 airplanes changed to the Special Freighter (SF) configuration
by the Boeing Company in accordance with Supplemental Type
Certificate (STC) ST00916WI-D that have a long inner chord strap
at the Body Station (STA) 1640 fuselage frame. Line numbers 50,
52, 54, 58, 63, 77-78, 81, 89-90, 93, 98, 123, 145, 160, 166, 168,
175, 179, 210-211, and 214.
-2
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
5 of 76

### Page 6

DESCRIPTIONCONFIGURATIONGROUP
757-300 airplanes that have a long inner chord strap at the Body
Station (STA) 1640 fuselage frame.
-3
757-200 airplanes that have a short inner chord strap at the Body
Station (STA) 1640 fuselage frame. Line Numbers 1-8, 12, 14-15,
17-22, 26-28, 31, and 34-44.
-4
757-200 airplanes changed to the Special Freighter (SF) configuration
by the Boeing Company in accordance with Supplemental Type
Certificate (STC) ST00916WI-D that have a short inner chord strap
at the Body Station (STA) 1640 fuselage frame. Line numbers 9-11,
13, 16, 23-25, 29-30, and 32-33.
-5
B. Spares Affected
None.
2. CONCURRENT REQUIREMENTS
None.
3. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive (AD) related to
Requirements Bulletin 757-53A0112 RB. The Airworthiness Directive will make the compliance tasks and
times given in Requirements Bulletin 757-53A0112 RB mandatory.
Accomplish the required action(s), based on the applicable condition(s) in Tables 1 through 10 in accordance
with the Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION. When more than
one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION
or OPTION.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
6 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 7

Group 1:
Table 1: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Within 1,300
flight cycles after
the original issue
date of Require-
ments Bulletin
757-53A0112
RB or before
32,500 total flight
cycles.
Before 20,000
total flight cycles.
Do a general visual inspec-
tion for any reinforcing re-
pair or local frame replace-
ment on the STA 1640
fuselage frame at the
stringer S-14L intercostal
area.
Airplanes with less than
32,000 total flight cycles at
the original issue date of
Requirements Bulletin 757-
53A0112 RB that have not
accomplished inspections
in accordance with the
original issue of Service
Bulletin 757-53A0108.
Whichever oc-
curs first.
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Do a general visual inspec-
tion for any reinforcing re-
pair or local frame replace-
ment on the STA 1640
fuselage frame at the
stringer S-14L intercostal
area.
Airplanes with 32,000 total
flight cycles or more at the
original issue date of Re-
quirements Bulletin 757-
53A0112 RB that have not
accomplished inspections
in accordance with the
original issue of Service
Bulletin 757-53A0108.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 5,600
flight cycles after
the last Service
Bulletin 757-
53A0108 inspec-
tion.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 with no
crack found.
-Within 12,000
flight cycles after
the installation of
the local frame
replacement or
within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 16,000
flight cycles after
the installation of
the local frame
replacement or
before 50,000 to-
tal flight cycles.
Whichever oc-
curs first.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14L
intercostal area that is
Boeing Organization Desig-
nation Authorization (ODA)
approved via an FAA form
8100-9 and the frame web
common to the tee clip
fastener holes at stringer
S-14L has been replaced.
Whichever oc-
curs later.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
7 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 8

Group 1:
Table 1: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14L
intercostal area that is not
Boeing ODA approved.
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a reinforcing
repair in the S-14L inter-
costal area.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 1:
ANY REINFORCING RE-
PAIR FOUND IN THE
STRINGER S-14L INSPEC-
TION AREA.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 2:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14L
INSPECTION AREA THAT
IS NOT BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
8 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 9

Group 1:
Table 1: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Within 12,000
flight cycles after
the installation of
the local frame
replacement or
within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 16,000
flight cycles after
the installation of
the local frame
replacement or
before 50,000 to-
tal flight cycles.
Whichever oc-
curs first.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
CONDITION 3:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14L
INSPECTION AREA THAT
IS BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9 AND THE
FRAME WEB COMMON
TO THE TEE CLIP FAS-
TENER HOLES AT
STRINGER S-14L HAS
BEEN REPLACED. Whichever oc-
curs later.
-Before further flight.Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
CONDITION 4:
NO REINFORCING RE-
PAIR OR LOCAL FRAME
REPLACEMENT FOUND
IN THE STRINGER S-14L
INSPECTION AREA.
-Before further flight.CONDITION 5 (ACTION 1):CONDITION 5:
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
ANY CRACK FOUND.
12,000-CONDITION 5 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14L intercostal tee
clip for any crack. (a)
-Before further flight.CONDITION 6 (ACTION 1):CONDITION 6:
Install fasteners common to
the frame web and S-14L
intercostal tee clip.
NO CRACK FOUND.
12,000-CONDITION 6 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14L intercostal tee
clip for any crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
9 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 10

Group 1:
Table 1: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
(a) In areas with reinforcing repairs or local frame replacements installed common to the Requirements Bulletin
757-53A0112 RB inspection area, it is not required to do the repeat inspections in accordance with Re-
quirements Bulletin 757-53A0112 RB provided the repair meets all the following criteria:
1. The repair is installed after the Original Issue date of Requirements Bulletin 757-53A0112 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an
FAA Form 8100-9 which states that the repeat inspection program for the repair or local frame
replacement is an alternate means of compliance with the Requirements Bulletin 757-53A0112
RB inspections in the repair area.
Group 1:
Table 2: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Within 1,300
flight cycles after
the original issue
date of Require-
ments Bulletin
757-53A0112
RB or before
32,500 total flight
cycles.
Before 20,000
total flight cycles.
Do a general visual inspec-
tion for any reinforcing re-
pair or local frame replace-
ment on the STA 1640
fuselage frame at the
stringer S-14R intercostal
area.
Airplanes with less than
32,000 total flight cycles at
the original issue date of
Requirements Bulletin 757-
53A0112 RB that have not
accomplished inspections
in accordance with the
original issue of Service
Bulletin 757-53A0108.
Whichever oc-
curs first.
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Do a general visual inspec-
tion for any reinforcing re-
pair or local frame replace-
ment on the STA 1640
fuselage frame at the
stringer S-14R intercostal
area.
Airplanes with 32,000 total
flight cycles or more at the
original issue date of Re-
quirements Bulletin 757-
53A0112 RB that have not
accomplished inspections
in accordance with the
original issue of Service
Bulletin 757-53A0108.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
10 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 11

Group 1:
Table 2: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 5,600
flight cycles after
the last Service
Bulletin 757-
53A0108 inspec-
tion.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 with no
crack found.
-Within 12,000
flight cycles after
the installation of
the local frame
replacement or
within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 16,000
flight cycles after
the installation of
the local frame
replacement or
before 50,000 to-
tal flight cycles.
Whichever oc-
curs first.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14R
intercostal area that is
Boeing Organization Desig-
nation Authorization (ODA)
approved via an FAA form
8100-9 and the frame web
common to the tee clip
fastener holes at stringer
S-14R has been replaced.
Whichever oc-
curs later.
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14R
intercostal area that is not
Boeing ODA approved.
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a reinforcing
repair in the S-14R inter-
costal area.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
11 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 12

Group 1:
Table 2: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 1:
ANY REINFORCING RE-
PAIR FOUND IN THE
STRINGER S-14R IN-
SPECTION AREA.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 2:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14R
INSPECTION AREA THAT
IS NOT BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9.
-Within 12,000
flight cycles after
the installation of
the local frame
replacement or
within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 16,000
flight cycles after
the installation of
the local frame
replacement or
before 50,000 to-
tal flight cycles.
Whichever oc-
curs first.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
CONDITION 3:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14R
INSPECTION AREA THAT
IS BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9 AND THE
FRAME WEB COMMON
TO THE TEE CLIP FAS-
TENER HOLES AT
STRINGER S-14R HAS
BEEN REPLACED. Whichever oc-
curs later.
-Before further flight.Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
CONDITION 4:
NO REINFORCING RE-
PAIR OR LOCAL FRAME
REPLACEMENT FOUND
IN THE STRINGER S-14R
INSPECTION AREA.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
12 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 13

Group 1:
Table 2: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Before further flight.CONDITION 5 (ACTION 1):CONDITION 5:
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
ANY CRACK FOUND.
12,000-CONDITION 5 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14R intercostal tee
clip for any crack. (a)
-Before further flight.CONDITION 6 (ACTION 1):CONDITION 6:
Install fasteners common to
the frame web and S-14R
intercostal tee clip.
NO CRACK FOUND.
12,000-CONDITION 6 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14R intercostal tee
clip for any crack. (a)
(a) In areas with reinforcing repairs or local frame replacements installed common to the Requirements Bulletin
757-53A0112 RB inspection area, it is not required to do the repeat inspections in accordance with Re-
quirements Bulletin 757-53A0112 RB provided the repair meets all the following criteria:
1. The repair is installed after the Original Issue date of Requirements Bulletin 757-53A0112 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an
FAA Form 8100-9 which states that the repeat inspection program for the repair or local frame
replacement is an alternate means of compliance with the Requirements Bulletin 757-53A0112
RB inspections in the repair area.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
13 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 14

Group 2:
Table 3: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Do a general visual inspec-
tion for any reinforcing re-
pair or local frame replace-
ment on the STA 1640
fuselage frame at the
stringer S-14L intercostal
area.
Airplanes that have not ac-
complished inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 2,600
flight cycles after
the last Service
Bulletin 757-
53A0108 inspec-
tion.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 with no
crack found.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 5,000
flight cycles after
the installation of
the local frame
replacement.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14L
intercostal area that is
Boeing Organization Desig-
nation Authorization (ODA)
approved via an FAA form
8100-9 and the frame web
common to the tee clip
fastener holes at stringer
S-14L has been replaced.
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14L
intercostal area that is not
Boeing ODA approved.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
14 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 15

Group 2:
Table 3: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a reinforcing
repair in the S-14L inter-
costal area.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 1:
ANY REINFORCING RE-
PAIR FOUND IN THE
STRINGER S-14L INSPEC-
TION AREA.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 2:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14L
INSPECTION AREA THAT
IS NOT BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 5,000
flight cycles after
the installation of
the local frame
replacement.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
CONDITION 3:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14L
INSPECTION AREA THAT
IS BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9 AND THE
FRAME WEB COMMON
TO THE TEE CLIP FAS-
TENER HOLES AT
STRINGER S-14L HAS
BEEN REPLACED.
-Before further flight.Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
CONDITION 4:
NO REINFORCING RE-
PAIR OR LOCAL FRAME
REPLACEMENT FOUND
IN THE STRINGER S-14L
INSPECTION AREA.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
15 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 16

Group 2:
Table 3: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Before further flight.CONDITION 5 (ACTION 1):CONDITION 5:
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
ANY CRACK FOUND.
5,700-CONDITION 5 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14L intercostal tee
clip for any crack. (a)
-Before further flight.CONDITION 6 (ACTION 1):CONDITION 6:
Install fasteners common to
the frame web and S-14L
intercostal tee clip.
NO CRACK FOUND.
5,700-CONDITION 6 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14L intercostal tee
clip for any crack. (a)
(a) In areas with reinforcing repairs or local frame replacements installed common to the Requirements Bulletin
757-53A0112 RB inspection area, it is not required to do the repeat inspections in accordance with Re-
quirements Bulletin 757-53A0112 RB provided the repair meets all the following criteria:
1. The repair is installed after the Original Issue date of Requirements Bulletin 757-53A0112 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an
FAA Form 8100-9 which states that the repeat inspection program for the repair or local frame
replacement is an alternate means of compliance with the Requirements Bulletin 757-53A0112
RB inspections in the repair area.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
16 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 17

Group 2:
Table 4: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Do a general visual inspec-
tion for any reinforcing re-
pair or local frame replace-
ment on the STA 1640
fuselage frame at the
stringer S-14R intercostal
area.
Airplanes that have not ac-
complished inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 2,600
flight cycles after
the last Service
Bulletin 757-
53A0108 inspec-
tion.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 with no
crack found.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 5,000
flight cycles after
the installation of
the local frame
replacement.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14R
intercostal area that is
Boeing Organization Desig-
nation Authorization (ODA)
approved via an FAA form
8100-9 and the frame web
common to the tee clip
fastener holes at stringer
S-14R has been replaced.
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14R
intercostal area that is not
Boeing ODA approved.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
17 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 18

Group 2:
Table 4: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a reinforcing
repair in the S-14R inter-
costal area.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 1:
ANY REINFORCING RE-
PAIR FOUND IN THE
STRINGER S-14R IN-
SPECTION AREA.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 2:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14R
INSPECTION AREA THAT
IS NOT BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 5,000
flight cycles after
the installation of
the local frame
replacement.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
CONDITION 3:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14R
INSPECTION AREA THAT
IS BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9 AND THE
FRAME WEB COMMON
TO THE TEE CLIP FAS-
TENER HOLES AT
STRINGER S-14R HAS
BEEN REPLACED.
-Before further flight.Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
CONDITION 4:
NO REINFORCING RE-
PAIR OR LOCAL FRAME
REPLACEMENT FOUND
IN THE STRINGER S-14R
INSPECTION AREA.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
18 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 19

Group 2:
Table 4: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Before further flight.CONDITION 5 (ACTION 1):CONDITION 5:
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
ANY CRACK FOUND.
5,700-CONDITION 5 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14R intercostal tee
clip for any crack. (a)
-Before further flight.CONDITION 6 (ACTION 1):CONDITION 6:
Install fasteners common to
the frame web and S-14R
intercostal tee clip.
NO CRACK FOUND.
5,700-CONDITION 6 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14R intercostal tee
clip for any crack. (a)
(a) In areas with reinforcing repairs or local frame replacements installed common to the Requirements Bulletin
757-53A0112 RB inspection area, it is not required to do the repeat inspections in accordance with Re-
quirements Bulletin 757-53A0112 RB provided the repair meets all the following criteria:
1. The repair is installed after the Original Issue date of Requirements Bulletin 757-53A0112 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an
FAA Form 8100-9 which states that the repeat inspection program for the repair or local frame
replacement is an alternate means of compliance with the Requirements Bulletin 757-53A0112
RB inspections in the repair area.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
19 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 20

Group 3:
Table 5: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Within 1,300
flight cycles after
the original issue
date of Require-
ments Bulletin
757-53A0112
RB or before
16,500 total flight
cycles.
Before 10,000
total flight cycles.
Do a general visual inspec-
tion for any reinforcing re-
pair or local frame replace-
ment on the STA 1640
fuselage frame at the
stringer S-14L intercostal
area.
Airplanes with less than
16,000 total flight cycles at
the original issue date of
Requirements Bulletin 757-
53A0112 RB that have not
accomplished inspections
in accordance with the
original issue of Service
Bulletin 757-53A0108.
Whichever oc-
curs first.
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Do a general visual inspec-
tion for any reinforcing re-
pair or local frame replace-
ment on the STA 1640
fuselage frame at the
stringer S-14L intercostal
area.
Airplanes with 16,000 total
flight cycles or more at the
original issue date of Re-
quirements Bulletin 757-
53A0112 RB that have not
accomplished inspections
in accordance with the
original issue of Service
Bulletin 757-53A0108.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 3,250
flight cycles after
the last Service
Bulletin 757-
53A0108 inspec-
tion.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 with no
crack found.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 6,300
flight cycles after
the installation of
the local frame
replacement.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14L
intercostal area that is
Boeing Organization Desig-
nation Authorization (ODA)
approved via an FAA form
8100-9 and the frame web
common to the tee clip
fastener holes at stringer
S-14L has been replaced.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
20 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 21

Group 3:
Table 5: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14L
intercostal area that is not
Boeing ODA approved.
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a reinforcing
repair in the S-14L inter-
costal area.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 1:
ANY REINFORCING RE-
PAIR FOUND IN THE
STRINGER S-14L INSPEC-
TION AREA.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 2:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14L
INSPECTION AREA THAT
IS NOT BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 6,300
flight cycles after
the installation of
the local frame
replacement.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
CONDITION 3:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14L
INSPECTION AREA THAT
IS BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9 AND THE
FRAME WEB COMMON
TO THE TEE CLIP FAS-
TENER HOLES AT
STRINGER S-14L HAS
BEEN REPLACED.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
21 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 22

Group 3:
Table 5: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Before further flight.Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
CONDITION 4:
NO REINFORCING RE-
PAIR OR LOCAL FRAME
REPLACEMENT FOUND
IN THE STRINGER S-14L
INSPECTION AREA.
-Before further flight.CONDITION 5 (ACTION 1):CONDITION 5:
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
ANY CRACK FOUND.
6,300-CONDITION 5 (ACTION 2):
Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14L intercostal tee
clip for any crack. (a)
flight cycles.
-Before further flight.CONDITION 6 (ACTION 1):CONDITION 6:
Install fasteners common to
the frame web and S-14L
intercostal tee clip.
NO CRACK FOUND.
6,300-CONDITION 6 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14L intercostal tee
clip for any crack. (a)
(a) In areas with reinforcing repairs or local frame replacements installed common to the Requirements Bulletin
757-53A0112 RB inspection area, it is not required to do the repeat inspections in accordance with Re-
quirements Bulletin 757-53A0112 RB provided the repair meets all the following criteria:
1. The repair is installed after the Original Issue date of Requirements Bulletin 757-53A0112 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an
FAA Form 8100-9 which states that the repeat inspection program for the repair or local frame
replacement is an alternate means of compliance with the Requirements Bulletin 757-53A0112
RB inspections in the repair area.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
22 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 23

Group 3:
Table 6: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Within 1,300
flight cycles after
the original issue
date of Require-
ments Bulletin
757-53A0112
RB or before
16,500 total flight
cycles.
Before 10,000
total flight cycles.
Do a general visual inspec-
tion for any reinforcing re-
pair or local frame replace-
ment on the STA 1640
fuselage frame at the
stringer S-14R intercostal
area.
Airplanes with less than
16,000 total flight cycles at
the original issue date of
Requirements Bulletin 757-
53A0112 RB that have not
accomplished inspections
in accordance with the
original issue of Service
Bulletin 757-53A0108.
Whichever oc-
curs first.
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Do a general visual inspec-
tion for any reinforcing re-
pair or local frame replace-
ment on the STA 1640
fuselage frame at the
stringer S-14R intercostal
area.
Airplanes with 16,000 total
flight cycles or more at the
original issue date of Re-
quirements Bulletin 757-
53A0112 RB that have not
accomplished inspections
in accordance with the
original issue of Service
Bulletin 757-53A0108.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 3,250
flight cycles after
the last Service
Bulletin 757-
53A0108 inspec-
tion.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 with no
crack found.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 6,300
flight cycles after
the installation of
the local frame
replacement.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14R
intercostal area that is
Boeing Organization Desig-
nation Authorization (ODA)
approved via an FAA form
8100-9 and the frame web
common to the tee clip
fastener holes at stringer
S-14R has been replaced.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
23 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 24

Group 3:
Table 6: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14R
intercostal area that is not
Boeing ODA approved.
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a reinforcing
repair in the S-14R inter-
costal area.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 1:
ANY REINFORCING RE-
PAIR FOUND IN THE
STRINGER S-14R IN-
SPECTION AREA.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 2:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14R
INSPECTION AREA THAT
IS NOT BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 6,300
flight cycles after
the installation of
the local frame
replacement.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
CONDITION 3:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14R
INSPECTION AREA THAT
IS BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9 AND THE
FRAME WEB COMMON
TO THE TEE CLIP FAS-
TENER HOLES AT
STRINGER S-14R HAS
BEEN REPLACED.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
24 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 25

Group 3:
Table 6: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Before further flight.Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
CONDITION 4:
NO REINFORCING RE-
PAIR OR LOCAL FRAME
REPLACEMENT FOUND
IN THE STRINGER S-14R
INSPECTION AREA.
-Before further flight.CONDITION 5 (ACTION 1):CONDITION 5:
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
ANY CRACK FOUND.
6,300-CONDITION 5 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14R intercostal tee
clip for any crack. (a)
-Before further flight.CONDITION 6 (ACTION 1):CONDITION 6:
Install fasteners common to
the frame web and S-14R
intercostal tee clip.
NO CRACK FOUND.
6,300-CONDITION 6 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14R intercostal tee
clip for any crack. (a)
(a) In areas with reinforcing repairs or local frame replacements installed common to the Requirements Bulletin
757-53A0112 RB inspection area, it is not required to do the repeat inspections in accordance with Re-
quirements Bulletin 757-53A0112 RB provided the repair meets all the following criteria:
1. The repair is installed after the Original Issue date of Requirements Bulletin 757-53A0112 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an
FAA Form 8100-9 which states that the repeat inspection program for the repair or local frame
replacement is an alternate means of compliance with the Requirements Bulletin 757-53A0112
RB inspections in the repair area.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
25 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 26

Group 4:
Table 7: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Do a general visual inspec-
tion for any reinforcing re-
pair or local frame replace-
ment on the STA 1640
fuselage frame at the
stringer S-14L intercostal
area.
Airplanes that have not ac-
complished inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 2,400
flight cycles after
the last Service
Bulletin 757-
53A0108 inspec-
tion.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 with no
crack found.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 8,600
flight cycles after
the installation of
the local frame
replacement.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14L
intercostal area that is
Boeing Organization Desig-
nation Authorization (ODA)
approved via an FAA form
8100-9 and the frame web
common to the tee clip
fastener holes at stringer
S-14L has been replaced.
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14L
intercostal area that is not
Boeing ODA approved.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
26 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 27

Group 4:
Table 7: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a reinforcing
repair in the S-14L inter-
costal area.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 1:
ANY REINFORCING RE-
PAIR FOUND IN THE
STRINGER S-14L INSPEC-
TION AREA.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 2:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14L
INSPECTION AREA THAT
IS NOT BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 8,600
flight cycles after
the installation of
the local frame
replacement.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
CONDITION 3:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14L
INSPECTION AREA THAT
IS BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9 AND THE
FRAME WEB COMMON
TO THE TEE CLIP FAS-
TENER HOLES AT
STRINGER S-14L HAS
BEEN REPLACED.
-Before further flight.Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
CONDITION 4:
NO REINFORCING RE-
PAIR OR LOCAL FRAME
REPLACEMENT FOUND
IN THE STRINGER S-14L
INSPECTION AREA.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
27 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 28

Group 4:
Table 7: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Before further flight.CONDITION 5 (ACTION 1):CONDITION 5:
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
ANY CRACK FOUND.
8,600-CONDITION 5 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14L intercostal tee
clip for any crack. (a)
-Before further flight.CONDITION 6 (ACTION 1):CONDITION 6:
Install fasteners common to
the frame web and S-14L
intercostal tee clip.
NO CRACK FOUND.
8,600-CONDITION 6 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14L intercostal tee
clip for any crack. (a)
(a) In areas with reinforcing repairs or local frame replacements installed common to the Requirements Bulletin
757-53A0112 RB inspection area, it is not required to do the repeat inspections in accordance with Re-
quirements Bulletin 757-53A0112 RB provided the repair meets all the following criteria:
1. The repair is installed after the Original Issue date of Requirements Bulletin 757-53A0112 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an
FAA Form 8100-9 which states that the repeat inspection program for the repair or local frame
replacement is an alternate means of compliance with the Requirements Bulletin 757-53A0112
RB inspections in the repair area.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
28 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 29

Group 4:
Table 8: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Do a general visual inspec-
tion for any reinforcing re-
pair or local frame replace-
ment on the STA 1640
fuselage frame at the
stringer S-14R intercostal
area.
Airplanes that have not ac-
complished inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 2,400
flight cycles after
the last Service
Bulletin 757-
53A0108 inspec-
tion.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 with no
crack found.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 8,600
flight cycles after
the installation of
the local frame
replacement.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14R
intercostal area that is
Boeing Organization Desig-
nation Authorization (ODA)
approved via an FAA form
8100-9 and the frame web
common to the tee clip
fastener holes at stringer
S-14R has been replaced.
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14R
intercostal area that is not
Boeing ODA approved.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
29 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 30

Group 4:
Table 8: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a reinforcing
repair in the S-14R inter-
costal area.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 1:
ANY REINFORCING RE-
PAIR FOUND IN THE
STRINGER S-14R IN-
SPECTION AREA.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 2:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14R
INSPECTION AREA THAT
IS NOT BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 8,600
flight cycles after
the installation of
the local frame
replacement.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
CONDITION 3:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14R
INSPECTION AREA THAT
IS BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9 AND THE
FRAME WEB COMMON
TO THE TEE CLIP FAS-
TENER HOLES AT
STRINGER S-14R HAS
BEEN REPLACED.
-Before further flight.Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
CONDITION 4:
NO REINFORCING RE-
PAIR OR LOCAL FRAME
REPLACEMENT FOUND
IN THE STRINGER S-14R
INSPECTION AREA.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
30 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 31

Group 4:
Table 8: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Before further flight.CONDITION 5 (ACTION 1):CONDITION 5:
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
ANY CRACK FOUND.
8,600-CONDITION 5 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14R intercostal tee
clip for any crack. (a)
-Before further flight.CONDITION 6 (ACTION 1):CONDITION 6:
Install fasteners common to
the frame web and S-14R
intercostal tee clip.
NO CRACK FOUND.
8,600-CONDITION 6 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14R intercostal tee
clip for any crack. (a)
(a) In areas with reinforcing repairs or local frame replacements installed common to the Requirements Bulletin
757-53A0112 RB inspection area, it is not required to do the repeat inspections in accordance with Re-
quirements Bulletin 757-53A0112 RB provided the repair meets all the following criteria:
1. The repair is installed after the Original Issue date of Requirements Bulletin 757-53A0112 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an
FAA Form 8100-9 which states that the repeat inspection program for the repair or local frame
replacement is an alternate means of compliance with the Requirements Bulletin 757-53A0112
RB inspections in the repair area.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
31 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 32

Group 5:
Table 9: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Do a general visual inspec-
tion for any reinforcing re-
pair or local frame replace-
ment on the STA 1640
fuselage frame at the
stringer S-14L intercostal
area.
Airplanes that have not ac-
complished inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 1,900
flight cycles after
the last Service
Bulletin 757-
53A0108 inspec-
tion.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 with no
crack found.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 3,000
flight cycles after
the installation of
the local frame
replacement.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14L
intercostal area that is
Boeing Organization Desig-
nation Authorization (ODA)
approved via an FAA form
8100-9 and the frame web
common to the tee clip
fastener holes at stringer
S-14L has been replaced.
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14L
intercostal area that is not
Boeing ODA approved.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
32 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 33

Group 5:
Table 9: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a reinforcing
repair in the S-14L inter-
costal area.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 1:
ANY REINFORCING RE-
PAIR FOUND IN THE
STRINGER S-14L INSPEC-
TION AREA.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 2:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14L
INSPECTION AREA THAT
IS NOT BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 3,000
flight cycles after
the installation of
the local frame
replacement.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
CONDITION 3:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14L
INSPECTION AREA THAT
IS BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9 AND THE
FRAME WEB COMMON
TO THE TEE CLIP FAS-
TENER HOLES AT
STRINGER S-14L HAS
BEEN REPLACED.
-Before further flight.Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14L intercostal tee clip for
any crack.
CONDITION 4:
NO REINFORCING RE-
PAIR OR LOCAL FRAME
REPLACEMENT FOUND
IN THE STRINGER S-14L
INSPECTION AREA.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
33 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 34

Group 5:
Table 9: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Before further flight.CONDITION 5 (ACTION 1):CONDITION 5:
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
ANY CRACK FOUND.
3,300-CONDITION 5 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14L intercostal tee
clip for any crack. (a)
-Before further flight.CONDITION 6 (ACTION 1):CONDITION 6:
Install fasteners common to
the frame web and S-14L
intercostal tee clip.
NO CRACK FOUND.
3,300-CONDITION 6 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14L intercostal tee
clip for any crack. (a)
(a) In areas with reinforcing repairs or local frame replacements installed common to the Requirements Bulletin
757-53A0112 RB inspection area, it is not required to do the repeat inspections in accordance with Re-
quirements Bulletin 757-53A0112 RB provided the repair meets all the following criteria:
1. The repair is installed after the Original Issue date of Requirements Bulletin 757-53A0112 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an
FAA Form 8100-9 which states that the repeat inspection program for the repair or local frame
replacement is an alternate means of compliance with the Requirements Bulletin 757-53A0112
RB inspections in the repair area.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
34 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 35

Group 5:
Table 10: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Do a general visual inspec-
tion for any reinforcing re-
pair or local frame replace-
ment on the STA 1640
fuselage frame at the
stringer S-14R intercostal
area.
Airplanes that have not ac-
complished inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 1,900
flight cycles after
the last Service
Bulletin 757-
53A0108 inspec-
tion.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 with no
crack found.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 3,000
flight cycles after
the installation of
the local frame
replacement.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14R
intercostal area that is
Boeing Organization Desig-
nation Authorization (ODA)
approved via an FAA form
8100-9 and the frame web
common to the tee clip
fastener holes at stringer
S-14R has been replaced.
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a local frame
replacement in the S-14R
intercostal area that is not
Boeing ODA approved.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
35 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 36

Group 5:
Table 10: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
--Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
Airplanes that have accom-
plished the inspections in
accordance with the origi-
nal issue of Service Bul-
letin 757-53A0108 and
have installed a reinforcing
repair in the S-14R inter-
costal area.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 1:
ANY REINFORCING RE-
PAIR FOUND IN THE
STRINGER S-14R IN-
SPECTION AREA.
-Before further flight.Contact The Boeing Compa-
ny for alternative inspec-
tion(s) and do the inspec-
tion(s) and any corrective
actions as applicable.
CONDITION 2:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14R
INSPECTION AREA THAT
IS NOT BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9.
-Within 500 flight
cycles after the
original issue
date of Require-
ments Bulletin
757-53A0112
RB.
Within 3,000
flight cycles after
the installation of
the local frame
replacement.
Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
CONDITION 3:
ANY LOCAL FRAME RE-
PLACEMENT FOUND IN
THE STRINGER S-14R
INSPECTION AREA THAT
IS BOEING ODA AP-
PROVED VIA AN FAA
FORM 8100-9 AND THE
FRAME WEB COMMON
TO THE TEE CLIP FAS-
TENER HOLES AT
STRINGER S-14R HAS
BEEN REPLACED.
-Before further flight.Do an open hole HFEC in-
spection of the STA 1640
fuselage frame web fasten-
er holes common to the S-
14R intercostal tee clip for
any crack.
CONDITION 4:
NO REINFORCING RE-
PAIR OR LOCAL FRAME
REPLACEMENT FOUND
IN THE STRINGER S-14R
INSPECTION AREA.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
36 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 37

Group 5:
Table 10: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Before further flight.CONDITION 5 (ACTION 1):CONDITION 5:
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
ANY CRACK FOUND.
3,300-CONDITION 5 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14R intercostal tee
clip for any crack. (a)
-Before further flight.CONDITION 6 (ACTION 1):CONDITION 6:
Install fasteners common to
the frame web and S-14R
intercostal tee clip.
NO CRACK FOUND.
3,300-CONDITION 6 (ACTION 2):
flight cycles.Repeat the open hole
HFEC inspection of the STA
1640 fuselage frame web
fastener holes common to
the S-14R intercostal tee
clip for any crack. (a)
(a) In areas with reinforcing repairs or local frame replacements installed common to the Requirements Bulletin
757-53A0112 RB inspection area, it is not required to do the repeat inspections in accordance with Re-
quirements Bulletin 757-53A0112 RB provided the repair meets all the following criteria:
1. The repair is installed after the Original Issue date of Requirements Bulletin 757-53A0112 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an
FAA Form 8100-9 which states that the repeat inspection program for the repair or local frame
replacement is an alternate means of compliance with the Requirements Bulletin 757-53A0112
RB inspections in the repair area.
4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This document and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other Boeing changes.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
37 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 38

If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
38 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 39

5.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF
METAL PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE
BUNDLES CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES
CAN CAUSE SPARKS OR OTHER ELECTRICAL DAMAGE.
CAUTION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. For the related SB, some locations are marked RC Start and RC
End to identify the requirements that are restated from the RB. For the related SB,
the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD.
Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations
to steps between RC Start and RC End, including substeps and identified figures.
For the related SB, the steps not between RC Start and RC End may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC; this is provided that the
steps between RC Start and RC End, including sub-steps and identified figures, can
still be done as specified, and the airplane can be put back in an airworthy condition.
Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 757 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 757
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
39 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 40

— Values for engine maintenance tasks are included in Chapter 70 of 757
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
5. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
6. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
7. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance, unless otherwise
specified. A mirror may be necessary to enhance visual access to all exposed surfaces
in the inspection area. This level of inspection is made under normally available
lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may
require removal or opening of access panels or doors. Stands, ladders or platforms
may be required to gain proximity to the area being checked. Basic cleaning may be
required to ensure appropriate visibility.
8. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION,
do all of the ACTION numbers for that CONDITION or OPTION.
9. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed to adjust
fastener grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01
for alternate full threaded fasteners (screws) needed for installation in this service
bulletin.
10. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
B. WORK INSTRUCTIONS
Actions Required for Compliance:
1. Requirements
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
40 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 41

Group 1:
Table 1: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
DO PART 1: OPEN AC-
CESS.
-Do a general visual inspection
for any reinforcing repair or local
frame replacement on the STA
1640 fuselage frame at the
stringer S-14L intercostal area.
Airplanes with less than 32,000
total flight cycles at the original
issue date of Requirements
Bulletin 757-53A0112 RB that
have not accomplished inspec-
tions in accordance with the
original issue of Service Bulletin
757-53A0108.
-FIGURE 1
DO PART 1: OPEN AC-
CESS.
-Do a general visual inspection
for any reinforcing repair or local
frame replacement on the STA
1640 fuselage frame at the
stringer S-14L intercostal area.
Airplanes with 32,000 total flight
cycles or more at the original
issue date of Requirements
Bulletin 757-53A0112 RB that
have not accomplished inspec-
tions in accordance with the
original issue of Service Bulletin
757-53A0108.
-FIGURE 1
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14L intercostal tee
clip for any crack.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
with no crack found.
-FIGURE 3
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14L intercostal tee
clip for any crack.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a local frame
replacement in the S-14L inter-
costal area that is Boeing Orga-
nization Designation Authoriza-
tion (ODA) approved via an FAA
form 8100-9 and the frame web
common to the tee clip fastener
holes at stringer S-14L has
been replaced.
-FIGURE 3
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
41 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 42

Group 1:
Table 1: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a local frame
replacement in the S-14L inter-
costal area that is not Boeing
ODA approved.
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a reinforcing
repair in the S-14L intercostal
area.
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
CONDITION 1:
ANY REINFORCING REPAIR
FOUND IN THE STRINGER S-
14L INSPECTION AREA.
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
CONDITION 2:
ANY LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14L INSPEC-
TION AREA THAT IS NOT
BOEING ODA APPROVED VIA
AN FAA FORM 8100-9.
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14L intercostal tee
clip for any crack.
CONDITION 3:
ANY LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14L INSPEC-
TION AREA THAT IS BOEING
ODA APPROVED VIA AN FAA
FORM 8100-9 AND THE
FRAME WEB COMMON TO
THE TEE CLIP FASTENER
HOLES AT STRINGER S-14L
HAS BEEN REPLACED.
-FIGURE 3
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
42 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 43

Group 1:
Table 1: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14L intercostal tee
clip for any crack.
CONDITION 4:
NO REINFORCING REPAIR
OR LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14L INSPEC-
TION AREA.
-FIGURE 3
--CONDITION 5 (ACTION 1):CONDITION 5:
ANY CRACK FOUND. Contact The Boeing Company
for repair instructions and do the
repair.
DO PART 2: CLOSE AC-
CESS.
-
DO PART 1: OPEN AC-
CESS.
-CONDITION 5 (ACTION 2):
Repeat the open hole HFEC in-
spection of the STA 1640 fuse-
lage frame web fastener holes
common to the S-14L intercostal
tee clip for any crack. (a)
-FIGURE 3
-FIGURE 5CONDITION 6 (ACTION 1):CONDITION 6:
NO CRACK FOUND. Install fasteners common to the
frame web and S-14L intercostal
tee clip.
DO PART 2: CLOSE AC-
CESS.
-
DO PART 1: OPEN AC-
CESS.
-CONDITION 6 (ACTION 2):
Repeat the open hole HFEC in-
spection of the STA 1640 fuse-
lage frame web fastener holes
common to the S-14L intercostal
tee clip for any crack. (a)
-FIGURE 3
(a) In areas with reinforcing repairs or local frame replacements installed common to the Requirements
Bulletin 757-53A0112 RB inspection area, it is not required to do the repeat inspections in accordance
with Requirements Bulletin 757-53A0112 RB provided the repair meets all the following criteria:
1. The repair is installed after the Original Issue date of Requirements Bulletin 757-53A0112 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an
FAA Form 8100-9 which states that the repeat inspection program for the repair or local frame
replacement is an alternate means of compliance with the Requirements Bulletin 757-53A0112
RB inspections in the repair area.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
43 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 44

Group 1:
Table 2: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
DO PART 1: OPEN AC-
CESS.
-Do a general visual inspection
for any reinforcing repair or local
frame replacement on the STA
1640 fuselage frame at the
stringer S-14R intercostal area.
Airplanes with less than 32,000
total flight cycles at the original
issue date of Requirements
Bulletin 757-53A0112 RB that
have not accomplished inspec-
tions in accordance with the
original issue of Service Bulletin
757-53A0108.
-FIGURE 2
DO PART 1: OPEN AC-
CESS.
-Do a general visual inspection
for any reinforcing repair or local
frame replacement on the STA
1640 fuselage frame at the
stringer S-14R intercostal area.
Airplanes with 32,000 total flight
cycles or more at the original
issue date of Requirements
Bulletin 757-53A0112 RB that
have not accomplished inspec-
tions in accordance with the
original issue of Service Bulletin
757-53A0108.
-FIGURE 2
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14R intercostal tee
clip for any crack.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
with no crack found.
-FIGURE 4
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14R intercostal tee
clip for any crack.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a local frame
replacement in the S-14R inter-
costal area that is Boeing Orga-
nization Designation Authoriza-
tion (ODA) approved via an FAA
form 8100-9 and the frame web
common to the tee clip fastener
holes at stringer S-14R has
been replaced.
-FIGURE 4
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
44 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 45

Group 1:
Table 2: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a local frame
replacement in the S-14R inter-
costal area that is not Boeing
ODA approved.
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a reinforcing
repair in the S-14R intercostal
area.
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
CONDITION 1:
ANY REINFORCING REPAIR
FOUND IN THE STRINGER S-
14R INSPECTION AREA.
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
CONDITION 2:
ANY LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14R INSPEC-
TION AREA THAT IS NOT
BOEING ODA APPROVED VIA
AN FAA FORM 8100-9.
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14R intercostal tee
clip for any crack.
CONDITION 3:
ANY LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14R INSPEC-
TION AREA THAT IS BOEING
ODA APPROVED VIA AN FAA
FORM 8100-9 AND THE
FRAME WEB COMMON TO
THE TEE CLIP FASTENER
HOLES AT STRINGER S-14R
HAS BEEN REPLACED.
-FIGURE 4
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
45 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 46

Group 1:
Table 2: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14R intercostal tee
clip for any crack.
CONDITION 4:
NO REINFORCING REPAIR
OR LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14R INSPEC-
TION AREA.
-FIGURE 4
--CONDITION 5 (ACTION 1):CONDITION 5:
ANY CRACK FOUND. Contact The Boeing Company
for repair instructions and do the
repair.
DO PART 2: CLOSE AC-
CESS.
-
DO PART 1: OPEN AC-
CESS.
-CONDITION 5 (ACTION 2):
Repeat the open hole HFEC in-
spection of the STA 1640 fuse-
lage frame web fastener holes
common to the S-14R inter-
costal tee clip for any crack. (a)
-FIGURE 4
-FIGURE 6CONDITION 6 (ACTION 1):CONDITION 6:
NO CRACK FOUND. Install fasteners common to the
frame web and S-14R inter-
costal tee clip.
DO PART 2: CLOSE AC-
CESS.
-
DO PART 1: OPEN AC-
CESS.
-CONDITION 6 (ACTION 2):
Repeat the open hole HFEC in-
spection of the STA 1640 fuse-
lage frame web fastener holes
common to the S-14R inter-
costal tee clip for any crack. (a)
-FIGURE 4
(a) In areas with reinforcing repairs or local frame replacements installed common to the Requirements
Bulletin 757-53A0112 RB inspection area, it is not required to do the repeat inspections in accordance
with Requirements Bulletin 757-53A0112 RB provided the repair meets all the following criteria:
1. The repair is installed after the Original Issue date of Requirements Bulletin 757-53A0112 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an
FAA Form 8100-9 which states that the repeat inspection program for the repair or local frame
replacement is an alternate means of compliance with the Requirements Bulletin 757-53A0112
RB inspections in the repair area.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
46 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 47

Group 2, 4-5:
Table 3: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
DO PART 1: OPEN AC-
CESS.
-Do a general visual inspection
for any reinforcing repair or local
frame replacement on the STA
1640 fuselage frame at the
stringer S-14L intercostal area.
Airplanes that have not accom-
plished inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108. -FIGURE 1
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14L intercostal tee
clip for any crack.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
with no crack found.
-FIGURE 3
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14L intercostal tee
clip for any crack.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a local frame
replacement in the S-14L inter-
costal area that is Boeing Orga-
nization Designation Authoriza-
tion (ODA) approved via an FAA
form 8100-9 and the frame web
common to the tee clip fastener
holes at stringer S-14L has
been replaced.
-FIGURE 3
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a local frame
replacement in the S-14L inter-
costal area that is not Boeing
ODA approved.
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a reinforcing
repair in the S-14L intercostal
area.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
47 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 48

Group 2, 4-5:
Table 3: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
CONDITION 1:
ANY REINFORCING REPAIR
FOUND IN THE STRINGER S-
14L INSPECTION AREA.
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
CONDITION 2:
ANY LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14L INSPEC-
TION AREA THAT IS NOT
BOEING ODA APPROVED VIA
AN FAA FORM 8100-9.
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14L intercostal tee
clip for any crack.
CONDITION 3:
ANY LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14L INSPEC-
TION AREA THAT IS BOEING
ODA APPROVED VIA AN FAA
FORM 8100-9 AND THE
FRAME WEB COMMON TO
THE TEE CLIP FASTENER
HOLES AT STRINGER S-14L
HAS BEEN REPLACED.
-FIGURE 3
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14L intercostal tee
clip for any crack.
CONDITION 4:
NO REINFORCING REPAIR
OR LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14L INSPEC-
TION AREA.
-FIGURE 3
--CONDITION 5 (ACTION 1):CONDITION 5:
ANY CRACK FOUND. Contact The Boeing Company
for repair instructions and do the
repair.
DO PART 2: CLOSE AC-
CESS.
-
DO PART 1: OPEN AC-
CESS.
-CONDITION 5 (ACTION 2):
Repeat the open hole HFEC in-
spection of the STA 1640 fuse-
lage frame web fastener holes
common to the S-14L intercostal
tee clip for any crack. (a)
-FIGURE 3
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
48 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 49

Group 2, 4-5:
Table 3: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
-FIGURE 5CONDITION 6 (ACTION 1):CONDITION 6:
NO CRACK FOUND. Install fasteners common to the
frame web and S-14L intercostal
tee clip.
DO PART 2: CLOSE AC-
CESS.
-
DO PART 1: OPEN AC-
CESS.
-CONDITION 6 (ACTION 2):
Repeat the open hole HFEC in-
spection of the STA 1640 fuse-
lage frame web fastener holes
common to the S-14L intercostal
tee clip for any crack. (a)
-FIGURE 3
(a) In areas with reinforcing repairs or local frame replacements installed common to the Requirements
Bulletin 757-53A0112 RB inspection area, it is not required to do the repeat inspections in accordance
with Requirements Bulletin 757-53A0112 RB provided the repair meets all the following criteria:
1. The repair is installed after the Original Issue date of Requirements Bulletin 757-53A0112 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an
FAA Form 8100-9 which states that the repeat inspection program for the repair or local frame
replacement is an alternate means of compliance with the Requirements Bulletin 757-53A0112
RB inspections in the repair area.
Group 2, 4-5:
Table 4: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
DO PART 1: OPEN AC-
CESS.
-Do a general visual inspection
for any reinforcing repair or local
frame replacement on the STA
1640 fuselage frame at the
stringer S-14R intercostal area.
Airplanes that have not accom-
plished inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108. -FIGURE 2
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14R intercostal tee
clip for any crack.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
with no crack found.
-FIGURE 4
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
49 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 50

Group 2, 4-5:
Table 4: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14R intercostal tee
clip for any crack.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a local frame
replacement in the S-14R inter-
costal area that is Boeing Orga-
nization Designation Authoriza-
tion (ODA) approved via an FAA
form 8100-9 and the frame web
common to the tee clip fastener
holes at stringer S-14R has
been replaced.
-FIGURE 4
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a local frame
replacement in the S-14R inter-
costal area that is not Boeing
ODA approved.
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a reinforcing
repair in the S-14R intercostal
area.
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
CONDITION 1:
ANY REINFORCING REPAIR
FOUND IN THE STRINGER S-
14R INSPECTION AREA.
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
CONDITION 2:
ANY LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14R INSPEC-
TION AREA THAT IS NOT
BOEING ODA APPROVED VIA
AN FAA FORM 8100-9.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
50 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 51

Group 2, 4-5:
Table 4: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14R intercostal tee
clip for any crack.
CONDITION 3:
ANY LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14R INSPEC-
TION AREA THAT IS BOEING
ODA APPROVED VIA AN FAA
FORM 8100-9 AND THE
FRAME WEB COMMON TO
THE TEE CLIP FASTENER
HOLES AT STRINGER S-14R
HAS BEEN REPLACED.
-FIGURE 4
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14R intercostal tee
clip for any crack.
CONDITION 4:
NO REINFORCING REPAIR
OR LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14R INSPEC-
TION AREA.
-FIGURE 4
--CONDITION 5 (ACTION 1):CONDITION 5:
ANY CRACK FOUND. Contact The Boeing Company
for repair instructions and do the
repair.
DO PART 2: CLOSE AC-
CESS.
-
DO PART 1: OPEN AC-
CESS.
-CONDITION 5 (ACTION 2):
Repeat the open hole HFEC in-
spection of the STA 1640 fuse-
lage frame web fastener holes
common to the S-14R inter-
costal tee clip for any crack. (a)
-FIGURE 4
-FIGURE 6CONDITION 6 (ACTION 1):CONDITION 6:
NO CRACK FOUND. Install fasteners common to the
frame web and S-14R inter-
costal tee clip.
DO PART 2: CLOSE AC-
CESS.
-
DO PART 1: OPEN AC-
CESS.
-CONDITION 6 (ACTION 2):
Repeat the open hole HFEC in-
spection of the STA 1640 fuse-
lage frame web fastener holes
common to the S-14R inter-
costal tee clip for any crack. (a)
-FIGURE 4
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
51 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 52

Group 2, 4-5:
Table 4: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
(a) In areas with reinforcing repairs or local frame replacements installed common to the Requirements
Bulletin 757-53A0112 RB inspection area, it is not required to do the repeat inspections in accordance
with Requirements Bulletin 757-53A0112 RB provided the repair meets all the following criteria:
1. The repair is installed after the Original Issue date of Requirements Bulletin 757-53A0112 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an
FAA Form 8100-9 which states that the repeat inspection program for the repair or local frame
replacement is an alternate means of compliance with the Requirements Bulletin 757-53A0112
RB inspections in the repair area.
Group 3:
Table 5: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
DO PART 1: OPEN AC-
CESS.
-Do a general visual inspection
for any reinforcing repair or local
frame replacement on the STA
1640 fuselage frame at the
stringer S-14L intercostal area.
Airplanes with less than 16,000
total flight cycles at the original
issue date of Requirements
Bulletin 757-53A0112 RB that
have not accomplished inspec-
tions in accordance with the
original issue of Service Bulletin
757-53A0108.
-FIGURE 1
DO PART 1: OPEN AC-
CESS.
-Do a general visual inspection
for any reinforcing repair or local
frame replacement on the STA
1640 fuselage frame at the
stringer S-14L intercostal area.
Airplanes with 16,000 total flight
cycles or more at the original
issue date of Requirements
Bulletin 757-53A0112 RB that
have not accomplished inspec-
tions in accordance with the
original issue of Service Bulletin
757-53A0108.
-FIGURE 1
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
52 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 53

Group 3:
Table 5: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14L intercostal tee
clip for any crack.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
with no crack found.
-FIGURE 3
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14L intercostal tee
clip for any crack.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a local frame
replacement in the S-14L inter-
costal area that is Boeing Orga-
nization Designation Authoriza-
tion (ODA) approved via an FAA
form 8100-9 and the frame web
common to the tee clip fastener
holes at stringer S-14L has
been replaced.
-FIGURE 3
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a local frame
replacement in the S-14L inter-
costal area that is not Boeing
ODA approved.
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a reinforcing
repair in the S-14L intercostal
area.
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
CONDITION 1:
ANY REINFORCING REPAIR
FOUND IN THE STRINGER S-
14L INSPECTION AREA.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
53 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 54

Group 3:
Table 5: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
CONDITION 2:
ANY LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14L INSPEC-
TION AREA THAT IS NOT
BOEING ODA APPROVED VIA
AN FAA FORM 8100-9.
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14L intercostal tee
clip for any crack.
CONDITION 3:
ANY LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14L INSPEC-
TION AREA THAT IS BOEING
ODA APPROVED VIA AN FAA
FORM 8100-9 AND THE
FRAME WEB COMMON TO
THE TEE CLIP FASTENER
HOLES AT STRINGER S-14L
HAS BEEN REPLACED.
-FIGURE 3
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14L intercostal tee
clip for any crack.
CONDITION 4:
NO REINFORCING REPAIR
OR LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14L INSPEC-
TION AREA.
-FIGURE 3
--CONDITION 5 (ACTION 1):CONDITION 5:
ANY CRACK FOUND. Contact The Boeing Company
for repair instructions and do the
repair.
DO PART 2: CLOSE AC-
CESS.
-
DO PART 1: OPEN AC-
CESS.
-CONDITION 5 (ACTION 2):
Repeat the open hole HFEC in-
spection of the STA 1640 fuse-
lage frame web fastener holes
common to the S-14L intercostal
tee clip for any crack. (a)
-FIGURE 3
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
54 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 55

Group 3:
Table 5: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14L
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
-FIGURE 5CONDITION 6 (ACTION 1):CONDITION 6:
NO CRACK FOUND. Install fasteners common to the
frame web and S-14L intercostal
tee clip.
DO PART 2: CLOSE AC-
CESS.
-
DO PART 1: OPEN AC-
CESS.
-CONDITION 6 (ACTION 2):
Repeat the open hole HFEC in-
spection of the STA 1640 fuse-
lage frame web fastener holes
common to the S-14L intercostal
tee clip for any crack. (a)
-FIGURE 3
(a) In areas with reinforcing repairs or local frame replacements installed common to the Requirements
Bulletin 757-53A0112 RB inspection area, it is not required to do the repeat inspections in accordance
with Requirements Bulletin 757-53A0112 RB provided the repair meets all the following criteria:
1. The repair is installed after the Original Issue date of Requirements Bulletin 757-53A0112 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an
FAA Form 8100-9 which states that the repeat inspection program for the repair or local frame
replacement is an alternate means of compliance with the Requirements Bulletin 757-53A0112
RB inspections in the repair area.
Group 3:
Table 6: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
DO PART 1: OPEN AC-
CESS.
-Do a general visual inspection
for any reinforcing repair or local
frame replacement on the STA
1640 fuselage frame at the
stringer S-14R intercostal area.
Airplanes with less than 16,000
total flight cycles at the original
issue date of Requirements
Bulletin 757-53A0112 RB that
have not accomplished inspec-
tions in accordance with the
original issue of Service Bulletin
757-53A0108.
-FIGURE 2
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
55 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 56

Group 3:
Table 6: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
DO PART 1: OPEN AC-
CESS.
-Do a general visual inspection
for any reinforcing repair or local
frame replacement on the STA
1640 fuselage frame at the
stringer S-14R intercostal area.
Airplanes with 16,000 total flight
cycles or more at the original
issue date of Requirements
Bulletin 757-53A0112 RB that
have not accomplished inspec-
tions in accordance with the
original issue of Service Bulletin
757-53A0108.
-FIGURE 2
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14R intercostal tee
clip for any crack.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
with no crack found.
-FIGURE 4
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14R intercostal tee
clip for any crack.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a local frame
replacement in the S-14R inter-
costal area that is Boeing Orga-
nization Designation Authoriza-
tion (ODA) approved via an FAA
form 8100-9 and the frame web
common to the tee clip fastener
holes at stringer S-14R has
been replaced.
-FIGURE 4
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a local frame
replacement in the S-14R inter-
costal area that is not Boeing
ODA approved.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
56 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 57

Group 3:
Table 6: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
Airplanes that have accom-
plished the inspections in accor-
dance with the original issue of
Service Bulletin 757-53A0108
and have installed a reinforcing
repair in the S-14R intercostal
area.
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
CONDITION 1:
ANY REINFORCING REPAIR
FOUND IN THE STRINGER S-
14R INSPECTION AREA.
--Contact The Boeing Company
for alternative inspection(s) and
do the inspection(s) and any
corrective actions as applicable.
CONDITION 2:
ANY LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14R INSPEC-
TION AREA THAT IS NOT
BOEING ODA APPROVED VIA
AN FAA FORM 8100-9.
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14R intercostal tee
clip for any crack.
CONDITION 3:
ANY LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14R INSPEC-
TION AREA THAT IS BOEING
ODA APPROVED VIA AN FAA
FORM 8100-9 AND THE
FRAME WEB COMMON TO
THE TEE CLIP FASTENER
HOLES AT STRINGER S-14R
HAS BEEN REPLACED.
-FIGURE 4
DO PART 1: OPEN AC-
CESS.
-Do an open hole HFEC inspec-
tion of the STA 1640 fuselage
frame web fastener holes com-
mon to the S-14R intercostal tee
clip for any crack.
CONDITION 4:
NO REINFORCING REPAIR
OR LOCAL FRAME REPLACE-
MENT FOUND IN THE
STRINGER S-14R INSPEC-
TION AREA.
-FIGURE 4
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
57 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 58

Group 3:
Table 6: General Visual and Open Hole High Frequency Eddy Current (HFEC) Inspections of the Body
Station (STA) 1640 Fuselage Frame at S-14R
Refer to the listed proce-
dures in SB 757-53A0112
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of
Compliance
ActionCondition
--CONDITION 5 (ACTION 1):CONDITION 5:
ANY CRACK FOUND. Contact The Boeing Company
for repair instructions and do the
repair.
DO PART 2: CLOSE AC-
CESS.
-
DO PART 1: OPEN AC-
CESS.
-CONDITION 5 (ACTION 2):
Repeat the open hole HFEC in-
spection of the STA 1640 fuse-
lage frame web fastener holes
common to the S-14R inter-
costal tee clip for any crack. (a)
-FIGURE 4
-FIGURE 6CONDITION 6 (ACTION 1):CONDITION 6:
NO CRACK FOUND. Install fasteners common to the
frame web and S-14R inter-
costal tee clip.
DO PART 2: CLOSE AC-
CESS.
-
DO PART 1: OPEN AC-
CESS.
-CONDITION 6 (ACTION 2):
Repeat the open hole HFEC in-
spection of the STA 1640 fuse-
lage frame web fastener holes
common to the S-14R inter-
costal tee clip for any crack. (a)
-FIGURE 4
(a) In areas with reinforcing repairs or local frame replacements installed common to the Requirements
Bulletin 757-53A0112 RB inspection area, it is not required to do the repeat inspections in accordance
with Requirements Bulletin 757-53A0112 RB provided the repair meets all the following criteria:
1. The repair is installed after the Original Issue date of Requirements Bulletin 757-53A0112 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an
FAA Form 8100-9 which states that the repeat inspection program for the repair or local frame
replacement is an alternate means of compliance with the Requirements Bulletin 757-53A0112
RB inspections in the repair area.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 16, 2018
757-53A0112 RB
58 of 76
REQUIREMENTS BULLETIN 757-53A0112
ALERTALERT

### Page 59 (OCR)

REQUIREMENTS BULLETIN 757-53A0112
ALERT  ALERT
STA
1720
STA
1701
STA
1681.8
STA
1661
STA
1640
STA
1620
STA
1600
S-6L
• S-7L
S-17L  • S-8L
S-18L
S-19L  S-9L
S-20L
• S-10L
• S-11L
S-13L
S-14L
S-15L
GENERAL VISUAL  S-16L  2832359
INSPECTION AREA
FIGURE 1: LEFT SIDE - BODY STATION (STA) 1640 FUSELAGE FRAME GENERAL VISUAL INSPECTION
(SHEET 1 OF 3)
Original Issue: November 16, 2018
Export Controlled ECCN: 9E991  Copyright © Unpublished  757-53A0112 RB
Work - See page 1 for details.  59 of 76

### Page 60 (OCR)

REQUIREMENTS BULLETIN 757-53A0112
ALERT  ALERT
OUTER CHORD
INTERCOSTAL TEE CLIP
FUSELAGE
FRAME
TYPICAL  FUSELAGE
'FRAME
S-14
STRAP  INTERCOSTAL  SHOWN FOR CLARITY  SOME PARTS NOT
S-14
INTERCOSTAL
LOWER HINGE
FITTING
- S -14L
INBD
INTERCOSTAL  'OUTER CHORD
GENERAL VISUAL  TEE CLIP
INSPECTION AREA  SOME PARTS NOT  C-C  2832360
SHOWN FOR CLARITY
FIGURE 1: LEFT SIDE - BODY STATION (STA) 1640 FUSELAGE FRAME GENERAL VISUAL INSPECTION
(SHEET 2 OF 3)
Original Issue: November 16, 2018
Export Controlled ECCN: 9E991  757-53A0112 RB
Copyright © Unpublished
Work - See page 1 for details.  60 of 76

The text continues at https://openairdocs.org/service-documents/boeing/757-53a0112-rb/file/fb0410d5b27b.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
