# Boeing Alert Requirements Bulletin 757-57A0074 RB: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2021-0262; AD 2021-22-23 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Requirements Bulletin 757-57A0074 RB](https://openairdocs.org/service-documents/boeing/757-57a0074-rb.md)
- Title as filed: 757-57A0074 RB
- Pages: 17
- PDF: https://openairdocs.org/files/sha256/ce/52/ce52d8e198253bb27285df3d1fb4089114b070d6f018837b8b8cb38a84b66bc7
- Page: https://openairdocs.org/service-documents/boeing/757-57a0074-rb/file/ce52d8e19825

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
757
Requirements Bulletin
ALERT
Number: 757-57A0074 RB
Original Issue: June 11, 2020
ATA System: 5720
SUBJECT: Wing - Outer Wing - Lower Aft Wing Skin - Inspection
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
Copyright © 2020 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: June 11, 2020
757-57A0074 RB
1 of 17
2.0

### Page 2

Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 11, 2020
757-57A0074 RB
2 of 17
REQUIREMENTS BULLETIN 757-57A0074
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
1. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
A. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
B. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
A. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
B. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
FIGURE 1: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING
SKIN, AFT EDGE AT FLAP TRACK NUMBER 2 (WBL 361) ATTACHMENT LOCATION. . 14
FIGURE 2: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING
SKIN, AFT EDGE AT FLAP TRACK NUMBER 7 (WBL 361) ATTACHMENT LOCATION. . 16
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 11, 2020
757-57A0074 RB
3 of 17
REQUIREMENTS BULLETIN 757-57A0074
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 11, 2020
757-57A0074 RB
4 of 17
REQUIREMENTS BULLETIN 757-57A0074
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
757
Requirements Bulletin
ALERT
Number: 757-57A0074 RB
Original Issue: June 11, 2020
ATA System: 5720
SUBJECT: Wing - Outer Wing - Lower Aft Wing Skin - Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY . IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING
PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN
(RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL
TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB
WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
1. Effectivity
A. Airplanes
This bulletin is applicable to 757-200, 757-200CB, 757-200PF , 757-300 Airplane(s), line number(s)
1-1050 in 2 Group(s). Where the effectivity is presented with hyphens between line numbers, the
airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers
1 through 9 inclusive.
The Variable Numbers and Group Information for the applicable airplanes are given below.
DESCRIPTIONCONFIGURATIONGROUP
757-200/-200CB/-200PF Airplanes-1
757-300 Airplanes-2
Airplane Models:
757-200, 757-200CB, 757-200PF , 757-300
GroupVariable Number
1NA001 - NA028
1NA191 - NA199
1NA201 - NA239
1NA301 - NA305
GroupVariable Number
1NA341 - NA352
1NA391 - NA399
1NA401 - NA408
1NA441 - NA447
GroupVariable Number
1NA501 - NA586
1NB001 - NB004
1NB021 - NB023
1NB036 - NB041
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 11, 2020
757-57A0074 RB
5 of 17

### Page 6

GroupVariable Number
1NB051 - NB053
1NB061 - NB073
1NB079
1NB131 - NB148
1NB161 - NB162
1NB166 - NB168
1NB201 - NB204
1NB221 - NB228
1NB230
1NB236
1NB239
1NB261 - NB267
1NB291 - NB299
1NB301 - NB302
1NB311 - NB312
1NB321 - NB331
1NB421 - NB438
1NB446
1NB451 - NB454
1NB501 - NB523
1NB561
1NB571
1NB581 - NB583
1NC001 - NC033
1NC041 - NC042
1NC051 - NC052
1NC056 - NC062
1NC066 - NC084
1NC091 - NC094
1NC151
1NC161
GroupVariable Number
1NC901 - NC951
1NC971 - NC974
1ND001 - ND007
1ND011 - ND059
1ND111 - ND113
1ND161 - ND199
1ND201 - ND203
1ND221 - ND225
1ND241 - ND248
1ND301 - ND322
1ND401
1ND891
1ND895
1NE001 - NE008
1NE011 - NE088
1NE091 - NE094
1NE141 - NE150
1NE161 - NE177
1NE201 - NE204
1NE301 - NE302
1NE311 - NE325
1NJ001 - NJ004
1NJ031 - NJ032
1NJ551 - NJ555
2NL001 - NL002
2NL006 - NL017
2NL101 - NL109
2NL141
2NL601 - NL616
1NN001 - NN002
1NN051 - NN052
GroupVariable Number
1NP901 - NP904
1NS601 - NS616
1NT001 - NT009
1NT201 - NT202
1NT231 - NT234
1NT237 - NT240
1NT242
1NT245 - NT248
1NT281 - NT289
1NT341 - NT347
1NT351 - NT360
1NT371 - NT373
1NT375 - NT379
1NT381 - NT386
1NT401 - NT409
1NT411 - NT412
1NT426 - NT427
1NT431 - NT432
1NT436 - NT438
1NT441 - NT442
1NT446
1NT701 - NT769
1NT791 - NT796
1NT861 - NT862
1NT881 - NT885
1NT901 - NT916
1NT971 - NT985
1NU031 - NU038
2NU701 - NU705
2NU721 - NU728
2NU731 - NU732
B. Spares Affected
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 11, 2020
757-57A0074 RB
6 of 17
REQUIREMENTS BULLETIN 757-57A0074
ALERTALERT

### Page 7

None.
2. CONCURRENT REQUIREMENTS
None.
3. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
Requirements Bulletin 757-57A0074 RB. The Airworthiness Directive will make the compliance tasks and
times given in Requirements Bulletin 757-57A0074 RB mandatory.
Accomplish the required action(s), based on the applicable condition(s) in Table 1 and Table 2, in accordance
with Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Group 1:
Table 1:High Frequency Eddy Current (HFEC) inspection of the left and right wing, lower aft wing skin
aft edge at flap track number 2 (WBL 361) and flap track number 7 (WBL 361) attachment locations
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever Occurs
Later)
ActionCondition
-Within 2,700 flight
cycles after the
Original Issue date
of Requirements
Bulletin 757-
57A0074 RB.
The compliance times
given in 1., 2., and 3.,
whichever occurs first:
1. Before
120,000 total
flight hours
2. Before
50,000 total
flight cycles
3. Before the
result of
80000-(0.5 X
TFH) - TFC
is less than
or equal to
zero.
TFC = Total Flight Cy-
cles
ACTION 1: Do a
HFEC inspection of
the lower aft wing
skin, aft edge, at flap
track number 2 (WBL
361) attachment loca-
tion, for any crack.
All Airplanes
-ACTION 2: Do a
HFEC inspection of
the lower aft wing
skin, aft edge, at flap
track number 7 (WBL
361) attachment loca-
tion, for any crack.
TFH = Total Flight
Hours
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 11, 2020
757-57A0074 RB
7 of 17
REQUIREMENTS BULLETIN 757-57A0074
ALERTALERT

### Page 8

Group 1:
Table 1:High Frequency Eddy Current (HFEC) inspection of the left and right wing, lower aft wing skin
aft edge at flap track number 2 (WBL 361) and flap track number 7 (WBL 361) attachment locations
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever Occurs
Later)
ActionCondition
24,000 flight cy-
cles.
-Do a repeat HFEC in-
spection of the lower
aft wing skin, aft
edge, flap track num-
ber 2 (WBL 361) at-
tachment location for
any crack.
CONDITION 1: NO
CRACK FOUND AT
FLAP TRACK NUM-
BER 2 (WBL 361)
ATTACHMENT LOCA-
TION. (a)
-Before further flight.Contact the Boeing
Company for repair
instructions and do
the repair.
CONDITION 2: ANY
CRACK FOUND AT
FLAP TRACK NUM-
BER 2 (WBL 361)
ATTACHMENT LOCA-
TION. (a)
24,000 flight cy-
cles.
-Do a repeat HFEC in-
spection of the lower
aft wing skin, aft
edge, flap track num-
ber 7 (WBL 361) at-
tachment location for
any crack.
CONDITION 3: NO
CRACK FOUND AT
FLAP TRACK NUM-
BER 7 (WBL 361)
ATTACHMENT LOCA-
TION. (a)
-Before further flight.Contact the Boeing
Company for repair
instructions and do
the repair.
CONDITION 4: ANY
CRACK FOUND AT
FLAP TRACK NUM-
BER 7 (WBL 361)
ATTACHMENT LOCA-
TION. (a)
(a) More than one CONDITION can be applicable on each airplane.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 11, 2020
757-57A0074 RB
8 of 17
REQUIREMENTS BULLETIN 757-57A0074
ALERTALERT

### Page 9

Group 2:
Table2:High Frequency Eddy Current (HFEC) inspection of the left and right wing, lower aft wing skin
aft edge at flap track number 2 (WBL 361) and flap track number 7 (WBL 361) attachment locations
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever Occurs
Later)
ActionCondition
-Within 2,700 flight
cycles after the
Original Issue date
of Requirements
Bulletin 757-
57A0074 RB.
Before 88,000 total
flight hours or 36,000
total flight cycles,
whichever occurs first.
ACTION 1: Do a
HFEC inspection of
the lower aft wing
skin, aft edge, at flap
track number 2 (WBL
361) attachment loca-
tion, for any crack.
All Airplanes
-ACTION 2: Do a
HFEC inspection of
the lower aft wing
skin, aft edge, at flap
track number 7 (WBL
361) attachment loca-
tion, for any crack.
12,000 flight cy-
cles.
-Do a repeat HFEC in-
spection of the lower
aft wing skin, aft
edge, flap track num-
ber 2 (WBL 361) at-
tachment location for
any crack.
CONDITION 1: NO
CRACK FOUND AT
FLAP TRACK NUM-
BER 2 (WBL 361)
ATTACHMENT LOCA-
TION. (a)
-Before further flight.Contact the Boeing
Company for repair
instructions and do
the repair.
CONDITION 2: ANY
CRACK FOUND AT
FLAP TRACK NUM-
BER 2 (WBL 361)
ATTACHMENT LOCA-
TION. (a)
12,000 flight cy-
cles.
-Do a repeat HFEC in-
spection of the lower
aft wing skin, aft
edge, flap track num-
ber 7 (WBL 361) at-
tachment location for
any crack.
CONDITION 3: NO
CRACK FOUND AT
FLAP TRACK NUM-
BER 7 (WBL 361)
ATTACHMENT LOCA-
TION. (a)
-Before further flight.Contact the Boeing
Company for repair
instructions and do
the repair.
CONDITION 4: ANY
CRACK FOUND AT
FLAP TRACK NUM-
BER 7 (WBL 361)
ATTACHMENT LOCA-
TION. (a)
(a) More than one CONDITION can be applicable on each airplane.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 11, 2020
757-57A0074 RB
9 of 17
REQUIREMENTS BULLETIN 757-57A0074
ALERTALERT

### Page 10

4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity.This document and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 11, 2020
757-57A0074 RB
10 of 17
REQUIREMENTS BULLETIN 757-57A0074
ALERTALERT

### Page 11

5.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. For the related SB, some locations are marked RC Start and RC
End to identify the requirements that are restated from the RB. For the related SB,
the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD.
Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations
to steps between RC Start and RC End, including substeps and identified figures.
For the related SB, the steps not between RC Start and RC End may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC; this is provided that the
steps between RC Start and RC End, including sub-steps and identified figures, can
still be done as specified, and the airplane can be put back in an airworthy condition.
Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. Boeing Service Letter 757-SL-51-022, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions.The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
5. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
6. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
7. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
8. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION,
do all of the ACTION numbers for that CONDITION or OPTION.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 11, 2020
757-57A0074 RB
11 of 17
REQUIREMENTS BULLETIN 757-57A0074
ALERTALERT

### Page 12

B. WORK INSTRUCTIONS
Actions Required for Compliance
1. Requirements
High Frequency Eddy Current (HFEC) inspection of the left and right wing, lower aft wing skin aft edge
at flap track number 2 (WBL 361) and flap track number 7 (WBL 361) attachment locations.
Refer to the listed proce-
dures in SB 757-57A0074
Original Issue or later
approved revisions as an
accepted procedure
Method of ComplianceActionCondition
PART 1: OPEN ACCESS-ACTION 1: Do a HFEC in-
spection of the lower aft
wing skin, aft edge, at flap
track number 2 (WBL 361)
attachment location, for
any crack.
All Airplanes
-FIGURE 1
-FIGURE 2ACTION 2: Do a HFEC in-
spection of the lower aft
wing skin, aft edge, at flap
track number 7 (WBL 361)
attachment location, for
any crack.
-FIGURE 1Do a repeat HFEC inspec-
tion of the lower aft wing
skin, aft edge, flap track
number 2 (WBL 361) at-
tachment location for any
crack.
CONDITION 1: NO
CRACK FOUND AT FLAP
TRACK NUMBER 2 (WBL
361) ATTACHMENT LO-
CATION.(a)
--Contact the Boeing Compa-
ny for repair instructions
and do the repair.
CONDITION 2: ANY
CRACK FOUND AT FLAP
TRACK NUMBER 2 (WBL
361) ATTACHMENT LO-
CATION.(a)
-FIGURE 2Do a repeat HFEC inspec-
tion of the lower aft wing
skin, aft edge, flap track
number 7 (WBL 361) at-
tachment location for any
crack.
CONDITION 3: NO
CRACK FOUND AT FLAP
TRACK NUMBER 7 (WBL
361) ATTACHMENT LO-
CATION.(a)
PART 2: CLOSE ACCESS-
--Contact the Boeing Compa-
ny for repair instructions
and do the repair.
CONDITION 4: ANY
CRACK FOUND AT FLAP
TRACK NUMBER 7 (WBL
361) ATTACHMENT LO-
CATION.(a)
PART 2: CLOSE ACCESS-
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 11, 2020
757-57A0074 RB
12 of 17
REQUIREMENTS BULLETIN 757-57A0074
ALERTALERT

### Page 13

High Frequency Eddy Current (HFEC) inspection of the left and right wing, lower aft wing skin aft edge
at flap track number 2 (WBL 361) and flap track number 7 (WBL 361) attachment locations.
Refer to the listed proce-
dures in SB 757-57A0074
Original Issue or later
approved revisions as an
accepted procedure
Method of ComplianceActionCondition
(a) More than one CONDITION can be applicable on each airplane.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 11, 2020
757-57A0074 RB
13 of 17
REQUIREMENTS BULLETIN 757-57A0074
ALERTALERT

### Page 14 (OCR)

REQUIREMENTS BULLETIN 757-57A0074
ALERT  ALERT
I FLAP TRACK
NUMBER 2
(WBL 361)
REAR SPAR
TRACK SUPPORT
FITTINGS
FLAP TRACK
LOWER AFT WING SKIN
INSPECTION AREA  FLAP TRACK NUMBER 2 ATTACHMENT AREA
(VIEW LOOKING DOWN)
2935039
FIGURE 1: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING SKIN,
AFT EDGE AT FLAP TRACK NUMBER 2 (WBL 361) ATTACHMENT LOCATION
(SHEET 1 OF 2)
Original Issue: June 11, 2020
Export Controlled ECCN: 9E991  Copyright © Unpublished  757-57A0074 RB
Work - See page 1 for details.  14 of 17

### Page 15

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each flap track location.
More DataQtyIdentificationNameTaskStep
(a)1-LOWER WING SKINInspect1
(a) Do a HFEC inspection of the lower aft wing skin, aft edge at the flap track number 2 (WBL 361) attachment
location for any crack in accordance with 757 NDT Manual Part 6, 51-00-01 or 757 NDT Manual Part 6,
51-00-19.
FIGURE 1: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING SKIN,
AFT EDGE AT FLAP TRACK NUMBER 2 (WBL 361) ATTACHMENT LOCATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 11, 2020
757-57A0074 RB
15 of 17
REQUIREMENTS BULLETIN 757-57A0074
ALERTALERT

### Page 16 (OCR)

REQUIREMENTS BULLETIN 757-57A0074
ALERT  ALERT
FLAP TRACK
NUMBER 7
(WBL 361)
REAR SPAR
TRACK SUPPORT
FITTINGS
FLAP TRACK
LOWER AFT
WING SKIN
INSPECTION AREA
FLAP TRACK NUMBER 7 ATTACHMENT AREA
(VIEW LOOKING DOWN)
2935040
FIGURE 2: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING SKIN,
AFT EDGE AT FLAP TRACK NUMBER 7 (WBL 361) ATTACHMENT LOCATION
(SHEET 1 OF 2)
Original Issue: June 11, 2020
Export Controlled ECCN: 9E991  757-57A0074 RB
Copyright © Unpublished
Work - See page 1 for details.  16 of 17

### Page 17

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each flap track location.
More DataQtyIdentificationNameTaskStep
(a)1-LOWER WING SKINInspect1
(a) Do a HFEC inspection of the lower aft wing skin, aft edge at the flap track number 7 (WBL 361) attachment
location for any crack in accordance with 757 NDT Manual Part 6, 51-00-01 or 757 NDT Manual Part 6,
51-00-19.
FIGURE 2: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING SKIN,
AFT EDGE AT FLAP TRACK NUMBER 7 (WBL 361) ATTACHMENT LOCATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 11, 2020
757-57A0074 RB
17 of 17
REQUIREMENTS BULLETIN 757-57A0074
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
