# Boeing Alert Service Bulletin 767-34A0828: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2019-0252; AD 2019-24-18 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 767-34A0828](https://openairdocs.org/service-documents/boeing/767-34a0828.md)
- Title as filed: SB-767-34A0828-00 12-06-2018
- Pages: 29
- PDF: https://openairdocs.org/files/sha256/30/b0/30b04f5e64939cfa037e495d9e9abea16650ebef318518f5a6f577aa2a86b383
- Page: https://openairdocs.org/service-documents/boeing/767-34a0828/file/30b04f5e6493

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
767
Service Bulletin
ALERT
Number: 767-34A0828
Original Issue: December 06, 2018
ATA System: 3412
SUBJECT: NAVIGATION - Air Data Computing System - Angle of Attack Sensor Inspection and
Replacement
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
Copyright © 2018 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: December 06, 2018
767-34A0828
1 of 29
3.0

### Page 2

Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
2 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 20
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 21
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 22
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
FIGURE 1: AREA OUTBOARD AND ABOVE NOSE LANDING GEAR WHEEL WELL - INSPECT LEFT
ANGLE OF ATTACK SENSOR - SLINGER . . . . . . . . . . . . . . . . . . . . . . . . . . 26
FIGURE 2: AREA OUTBOARD AND ABOVE NOSE LANDING GEAR WHEEL WELL - INSPECT RIGHT
ANGLE OF ATTACK SENSOR - SLINGER . . . . . . . . . . . . . . . . . . . . . . . . . . 27
FIGURE 3: AREA OUTBOARD AND ABOVE NOSE LANDING GEAR WHEEL WELL - INSPECT LEFT
ANGLE OF ATTACK SENSOR - PART NUMBER . . . . . . . . . . . . . . . . . . . . . . 28
FIGURE 4: AREA OUTBOARD AND ABOVE NOSE LANDING GEAR WHEEL WELL - INSPECT RIGHT
ANGLE OF ATTACK SENSOR - PART NUMBER . . . . . . . . . . . . . . . . . . . . . . 29
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
3 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
4 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
767
Service Bulletin
ALERT
SummaryNumber: 767-34A0828Original Issue: December 06, 2018
ATA System: 3412
SUBJECT: NAVIGATION - Air Data Computing System - Angle of Attack Sensor Inspection and
Replacement
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Boeing has received reports from operators of nuisance stick shaker activation while the airplane is accelerating
to cruise speed at the top of a climb. A review of recorded flight data and weather reports indicated that the
cause of the nuisance stick shakers was that the Angle of Attack (AOA) sensor vanes were frozen and had
become immobilized because the heaters in the AOA sensor were not sufficient to prevent ice build-up in the
faceplate and vane. This can be caused during heavy moisture conditions leading to water entering the AOA
vane pivot and freezing during takeoff. If this service bulletin is not done, AOA sensors can freeze and become
immobilized, which can lead to an unrecoverable stall at low altitude, which can result in unsafe flight conditions.
This service bulletin gives instructions to inspect the left and right AOA sensor part numbers. Also, instructions
are given to replace existing AOA sensors that have heaters that are not sufficient to prevent ice build-up
faceplate and vane. Installation of new or serviceable AOA sensor(s) prevents immobilization of the AOA sensor
vane because of ice build-up.
Boeing Service Related Problem (SRP) 767-SRP-34-0141 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 767 FTD 34-15002 is related to this service bulletin.
Boeing Service Letter (SL) 767-SL-34-122-D is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Paragraph 1.E., ComplianceYesAD Related
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
5 of 29

### Page 6

ReferenceAffectedPlanning Data
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION (PRR B12901-125S)
At the area outboard and above nose landing gear wheel well, do the following:
1. Inspect the left and right AOA sensor.
2. If an AOA sensor has an incorrect part number, replace it with a new or serviceable AOA sensor.
3. If an AOA sensor has a correct part number, no AOA sensor replacement is required.
EFFECTIVITY
767-200, 767-300, 767-300F and 767-400ER Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of
affected airplane(s).
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
6 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 7 (OCR)

BOEING SERVICE BULLETIN 767-34A0828
ALERT  ALERT
Refer to Paragraph 2.A., Material - Price and Availability.
•00c
>
AT THE AREA OUTBOARD AND  VE NOSE LANDING GEAR WHEEL WELL:
- INSPECT THE LEFT AND RIGHT A  LE OF ATTACK SENSORS
- REPLACE THE ANGLE OF ATTACK SENSORS IF IT IS AN INCORRECT PART NUMBER
LEFT SIDE SHOWN, RIGHT SIDE OPPOSITE  2830209
ANGLE OF ATTACK SENSOF
Original Issue: December 06, 2018
Export Controlled ECCN: 9E991  767-34A0828
Copyright © Unpublished
Work - See page 1 for details.  7 of 29

### Page 8

Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
8 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
767
Service Bulletin
ALERT
Number: 767-34A0828
Original Issue: December 06, 2018
ATA System: 3412
SUBJECT: NAVIGATION - Air Data Computing System - Angle of Attack Sensor Inspection and
Replacement
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This bulletin is applicable to 767-200, 767-300, 767-300F, 767-400ER Airplane(s), line number(s)
1-717, 719-922, 924-1064, 1068, 1070-1090, 1093-1097, 1099, 1101, 1103, 1105-1106, 1108,
1110, 1112, 1115, 1118, 1121, 1123, 1125, 1127, 1130, 1133, 1136, 1138, 1140-1142, 1144,
1146, 1148, 1150, 1152-1153 in 1 Group(s). Where the effectivity is presented with hyphens
between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers
1-9 means line numbers 1 through 9 inclusive.
Refer to Service Bulletin Index D624T001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is applicable to 767-200, 767-300, 767-300F and 767-400ER Airplanes in 1
Group. The Variable Numbers and Group Information for the applicable airplanes is given below.
An equivalent change is on subsequent production airplanes. Refer to PRR B12901-125S for data
about this change.
DESCRIPTIONCONFIGURATIONGROUP
Airplanes that require inspection of the left and right Angle of Attack
(AOA) sensors and replacement of the AOA sensors as necessary.
-1
Airplane Models:
767-200, 767-300, 767-300F, 767-400ER
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
9 of 29

### Page 10

GroupVariable Number
1VA001 - VA020
1VA301 - VA315
1VA501 - VA530
1VA701 - VA719
1VA801 - VA810
1VB001 - VB002
1VB051 - VB055
1VB101 - VB125
1VB201 - VB202
1VB251 - VB253
1VB281 - VB284
1VB301 - VB302
1VB321 - VB332
1VB371 - VB373
1VB401
1VB441 - VB444
1VE001 - VE003
1VE021 - VE023
1VE041 - VE043
1VE061 - VE069
1VE083 - VE086
1VE101 - VE104
1VE116 - VE118
1VE121 - VE126
1VE141 - VE152
1VE171 - VE172
1VF001 - VF002
1VF041 - VF042
1VF051
1VF061 - VF062
1VF071 - VF072
1VF091 - VF093
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
10 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 11

GroupVariable Number
1VF101 - VF102
1VF161 - VF162
1VF171 - VF172
1VF180 - VF184
1VF251
1VK001 - VK016
1VK021 - VK022
1VK031 - VK056
1VK081 - VK113
1VK131 - VK133
1VK141 - VK148
1VK161 - VK164
1VK171
1VK181
1VK186
1VL001 - VL006
1VL011
1VL701 - VL703
1VL751 - VL755
1VL806 - VL807
1VL871 - VL873
1VL891 - VL900
1VL911 - VL914
1VL931 - VL932
1VL941
1VN001 - VN041
1VN051 - VN064
1VN081 - VN099
1VN111 - VN127
1VN130 - VN137
1VN151 - VN158
1VN163 - VN168
1VN171 - VN174
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
11 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 12

GroupVariable Number
1VN191 - VN198
1VN211 - VN212
1VN221 - VN225
1VN231 - VN234
1VN241 - VN243
1VN251 - VN276
1VN291 - VN293
1VN301 - VN314
1VN371 - VN372
1VN376
1VN381 - VN388
1VN421 - VN427
1VN436
1VN471 - VN472
1VN491 - VN513
1VN531 - VN532
1VN536 - VN537
1VN541 - VN542
1VN546 - VN547
1VN551
1VN556 - VN557
1VN561 - VN562
1VN631 - VN638
1VN651 - VN658
1VN671 - VN672
1VN676
1VN681 - VN691
1VN731 - VN732
1VN751 - VN753
1VN791 - VN792
1VN811 - VN813
1VN921 - VN922
1VN931 - VN936
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
12 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 13

GroupVariable Number
1VN951 - VN953
1VN966 - VN972
1VQ001 - VQ021
1VQ071 - VQ086
1VQ111
1VR051 - VR060
1VR081
1VR084
1VR086 - VR089
1VR106 - VR109
1VR201 - VR211
1VR251
1VR256 - VR260
1VR266 - VR292
1VR401
1VR421 - VR423
1VR426
1VR441
1VR461
1VR471 - VR472
1VS051 - VS056
1VS061
1VS066 - VS070
1VS073 - VS078
1VS091 - VS104
1VS111 - VS113
1VS131 - VS133
1VS136 - VS137
1VS176 - VS177
1VS186 - VS187
1VS196 - VS203
1VS206 - VS208
1VS211
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
13 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 14

GroupVariable Number
1VS216 - VS217
1VS231
1VS246 - VS248
1VS261 - VS263
1VS266 - VS274
1VS291 - VS293
1VS301 - VS303
1VS306 - VS311
1VS316
1VS321 - VS324
1VS331 - VS333
1VS336 - VS337
1VS366 - VS367
1VS381 - VS382
1VS391 - VS392
1VS401
1VS426 - VS428
1VS466 - VS472
1VS486
1VS496 - VS497
1VS506 - VS507
1VS526
1VS546 - VS549
1VS701 - VS736
1VS751 - VS759
1VS821 - VS825
1VS841 - VS844
1VS861
1VS881 - VS883
1VS891
1VS896
1VS901 - VS912
1VS916
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
14 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 15

GroupVariable Number
1VS921 - VS928
1VS931 - VS933
1VS941
1VS951 - VS954
1VS961 - VS969
1VS971 - VS977
1VS981 - VS984
1VT001 - VT013
1VT021
1VT031 - VT033
1VT501
1VT511 - VT513
1VT521 - VT523
1VT531 - VT533
1VT541 - VT546
1VT551 - VT552
1VT556 - VT612
1VW701 - VW721
1VW851
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
Boeing has received reports from operators of nuisance stick shaker activation while the airplane is
accelerating to cruise speed at the top of a climb. A review of recorded flight data and weather reports
indicated that the cause of the nuisance stick shakers was that the Angle of Attack (AOA) sensor vanes
were frozen and had become immobilized because the heaters in the AOA sensor were not sufficient
to prevent ice build-up in the faceplate and vane. This can be caused during heavy moisture conditions
leading to water entering the AOA vane pivot and freezing during takeoff. If this service bulletin is not
done AOA sensors can freeze and become immobilized, which can lead to an unrecoverable stall at
low altitude, which can result in unsafe flight conditions.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
15 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 16

This service bulletin gives instructions to inspect the left and right AOA sensor part numbers. Also,
instructions are given to replace existing AOA sensors that have heaters that are not sufficient to prevent
ice build-up faceplate and vane. Installation of new or serviceable AOA sensor(s) prevents immobilization
of the AOA sensor vane because of ice build-up.
Boeing Service Related Problem (SRP) 767-SRP-34-0141 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 767 FTD 34-15002 is related to this service bulletin.
Boeing Service Letter (SL) 767-SL-34-122-D is related to this service bulletin.
D. Description
At the area outboard and above nose landing gear wheel well, do the following:
1. Inspect the left and right AOA sensor.
2. If an AOA sensor has an incorrect part number, replace it with a new or serviceable AOA sensor.
3. If an AOA sensor has a correct part number, no AOA sensor replacement is required.
The changes in this service bulletin will not change the Engine Indication and Crew Alerting System
(EICAS).
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
117, 118767-200, 767-300, 767-300F,
767-400ER
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for
that CONDITION or OPTION.
Accomplish the required action(s), based on the applicable condition(s) in Table(s) 1, in accordance
with Paragraph 3. Accomplishment Instructions.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
16 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 17

Table 1: ANGLE OF ATTACK SENSOR INSPECTION
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 3,470 flight
hours after the
original issue date
of this service bul-
letin.
OPTION 1: Do a General
Visual Inspection of the
Angle of Attack sensor on
the airplane.
All Airplanes
OPTION 2: Inspection for
the Angle of Attack sen-
sor not on airplane.
-Before further
flight.
Replace the affected An-
gle of Attack sensor.
CONDITION 1: OPTION 1:
ANY ANGLE OF ATTACK
SENSOR WITH THE
GRADUAL SLOPE OF
SLINGER FOUND
--No further action is re-
quired.
CONDITION 2: OPTION 1:
ANY ANGLE OF ATTACK
SENSOR WITHOUT THE
GRADUAL SLOPE OF
SLINGER FOUND
-Before further
flight.
Replace the affected An-
gle of Attack sensor.
CONDITION 3: OPTION 2:
ANY ANGLE OF ATTACK
SENSOR WITH PART
NUMBER 0861CAB (BOE-
ING PART NUMBER
S233T913-1) FOUND
--No further action is re-
quired.
CONDITION 4: OPTION 2:
NO ANGLE OF ATTACK
SENSOR WITH PART
NUMBER 0861CAB (BOE-
ING PART NUMBER
S233T913-1) FOUND
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
17 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 18

G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools
OPTION 1: GENERAL VISUAL INSPECTION (GVI) OF THE ANGLE OF ATTACK SENSOR ON
AIRPLANE
Elapsed HoursTask HoursNumber of PersonsTask
0.100.101Open Access
0.050.051FIGURE 1
0.050.051FIGURE 2
1.001.001Remove (a)
1.001.001Install (a)
0.250.251Test (a)
0.100.101Close Access
2.552.55TOTAL FOR EACH AIRPLANE (a)
(a) Removal, installation and test are dependent on inspection results. This estimate in-
cludes the hours necessary for the removal, installation and test of both left and right
AOA sensors.
OPTION 2: INSPECTION WITH THE ANGLE OF ATTACK SENSOR NOT ON AIRPLANE
Elapsed HoursTask HoursNumber of PersonsTask
0.100.101Open Access
1.001.001Remove
0.050.051FIGURE 3
0.050.051FIGURE 4
1.001.001Install
0.250.251Test
0.100.101Close Access
2.552.55TOTAL FOR EACH AIRPLANE
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
18 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 19

H. Weight and Balance Changes
OPTION 1, CONDITION 1; OPTION 2, CONDITION 3
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
-184-0.9767-200 (a)
-92.0-0.5767-200 (b)
(a) Airplanes that have 2 AOA sensors replaced.
(b) Airplanes that have 1 AOA sensor replaced.
OPTION 1, CONDITION 1; OPTION 2, CONDITION 3
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
-72.7-0.9767-300, 767-
300F (a)
-36.4-0.5767-300, 767-
300F (b)
(a) Airplanes that have 2 AOA sensors replaced.
(b) Airplanes that have 1 AOA sensor replaced.
OPTION 1, CONDITION 1; OPTION 2, CONDITION 3
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+48.8-0.9767-400ER (a)
-24.4-0.5767-400ER (b)
(a) Airplanes that have 2 AOA sensors replaced.
(b) Airplanes that have 1 AOA sensor replaced.
OPTION 1, CONDITION 2; OPTION 2, CONDITION 4
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
00767-200, 767-300,
767-300F, 767-
400ER
I. Electrical Load Data
Not changed.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
19 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 20

J. References
1. Existing Data:
a. Engineering Change Memo PRR B12901-125S
b. Boeing Service Letter 767-SL-34-122-D
c. Boeing Service Related Problem (SRP) 767-SRP-34-0141
d. Service Bulletin Index D624T001
e. 767 Aircraft Maintenance Manual (AMM) 34-12-03
f. 767 Fleet Team Digest (FTD) 34-15002
g. Rosemount Aerospace Incorporated Service Bulletin 0861FL-27A-01
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
34-12767 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs or changes in this service bulletin for effects on Fatigue Critical
Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability
information.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
20 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 21

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane. As an alternative, operators can purchase the parts from Boeing Spares. This service bulletin
does not show the Boeing price and supply data.
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
The following parts or materials are necessary to do the change in this service bulletin. Parts and
materials in the manuals given in Paragraph 1.J., References, can also be necessary. Examine
operator part and material supply to make sure all necessary parts and materials are available.
NotesExisting Boeing
Part Number
Existing Supplier
Part Number
NameQTYNew Boeing
Part Number
New Supplier
Part Number
(a)(b)(c)(d)S233T913-10861CAB (f)SENSOR, ANGLE
OF ATTACK
2S233T913-40861FL
(a)(b)(c)S233T913-10861CAB (f)SENSOR, ANGLE
OF ATTACK
2S233T913-50861FL1
(e)233T9131-2-GASKET2233T9131-2-
(a) The quantity shown is the maximum quantity of Angle Of Attack (AOA) sensors installed on one airplane.
Inspection results will determine quantity needed.
(b) You cannot use the existing part to replace the new part.
(c) Supplier Information:
Primary: Supplier Cage Code: 59885, UTC Aerospace Systems, 14300 Judicial Road,Burnsville, MN
55306-4898, U.S.A.
Alternate: Aviall (Cage 22819), 2750 Regent Blvd, Dallas, Texas 75261, U.S.A. Contact Information: Email:
Supplier_Services@Aviall.com, Attn: Product Line Manager, Tel: 1-800-Aviall-1, 972-586-
1000,http://www.aviall.com
(d) Part number 0861FL is usable under the constraints of Rosemount Aerospace Incorporated Service Bulletin
0861FL-27A-01.
(e) The quantity shown is the maximum quantity required. A new gasket is required every time the AOA
sensor gets removed and installed.
(f) This part can be written as 861CAB or 861CABMOD(x).
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
21 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 22

3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
22 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 23

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF
METAL PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE
BUNDLES CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES
CAN CAUSE SPARKS OR OTHER ELECTRICAL DAMAGE.
CAUTION
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 767 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 767
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 767
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance unless otherwise
specified. A mirror may be necessary to enhance visual access to all exposed surfaces
in the inspection area. This level of inspection is made under normally available
lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may
require removal or opening of access panels or doors. Stands, ladders or platforms
may be required to gain proximity to the area being checked.
5. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
23 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 24

6. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
7. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
8. This service bulletin includes functional test procedures for the systems changed by
this service bulletin. More functional tests can possibly be necessary in accordance
with standard maintenance practices because of interruption to other airplane systems.
9. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
10. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an
OPTION number, do all of the ACTION numbers for that CONDITION number or
OPTION number.
11. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
12. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. If a step or sub-step is labeled
"RC Exempt," then the RC requirement is removed from that step or sub-step. An
Alternative Method of Compliance (AMOC) is required for any deviations to RC steps,
including sub-steps and identified figures. Steps not labeled as RC may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC. This is provided that
the RC steps, including sub-steps and identified figures, can still be done as specified,
and the airplane can be put back in an airworthy condition.
B. WORK INSTRUCTIONS
1. Get access to the left and right Angle of Attack (AOA) sensors in the area outboard and above the
nose landing gear wheel well.
2. RC - Do one of the options that follow:
a. OPTION 1: GENERAL VISUAL INSPECTION (GVI) OF THE ANGLE OF ATTACK SENSOR
ON AIRPLANE
(1) Do a GVI of the left and right AOA sensors in accordance with FIGURE 1 and FIGURE
2.
(a) CONDITION 1: ANY AOA SENSOR WITH THE GRADUAL SLOPE OF SLINGER
FOUND
1) Remove the affected AOA sensor. Refer to 767 AMM 34-12-03 as an accepted
procedure.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
24 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 25

2) Install new or serviceable AOA sensor part number 0861FL (Boeing part number
S233T913-4) or 0861FL1 (Boeing part number S233T913-5). Refer to 767 AMM
34-12-03 as an accepted procedure.
3) RC Exempt - Do the functional test. If the test fails, accomplish corrective actions
and repeat the test and applicable corrective actions until the test is passed.
Refer to 767 AMM 34-12-03 as an accepted procedure.
(b) CONDITION 2: ANY AOA SENSOR WITHOUT THE GRADUAL SLOPE OF SLINGER
FOUND
1) No further action is required.
b. OPTION 2: INSPECTION WITH THE ANGLE OF ATTACK SENSOR NOT ON AIRPLANE
(1) Remove the left and right AOA sensors. Refer to 767 AMM 34-12-03 as an accepted
procedure.
(2) Do a GVI of the left and right AOA sensors for the part number in accordance with FIGURE
3 and FIGURE 4.
(a) CONDITION 3: ANY AOA SENSOR WITH PART NUMBER 0861CAB (BOEING
PART NUMBER S233T913-1) FOUND
1) Install new or serviceable AOA sensor part number 0861FL (Boeing part number
S233T913-4) or 0861FL1 (Boeing part number S233T913-5). Refer to 767 AMM
34-12-03 as an accepted procedure.
2) RC Exempt - Do the functional test. If the test fails, accomplish corrective actions
and repeat the test and applicable corrective actions until the test is passed.
Refer to 767 AMM 34-12-03 as an accepted procedure.
(b) CONDITION 4: NO AOA SENSOR WITH PART NUMBER 0861CAB (BOEING PART
NUMBER S233T913-1) FOUND
1) RC Exempt - Install the existing part back on the airplane. Refer to 767 AMM
34-12-03 as an accepted procedure.
2) RC Exempt - Do the functional test. If the test fails, accomplish corrective actions
and repeat the test and applicable corrective actions until the test is passed.
Refer to 767 AMM 34-12-03 as an accepted procedure.
3. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
25 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 26

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
(a)1-SENSOR, ANGLE OF
ATTACK
Inspect1
(a) Do a general visual inspection of the AOA sensor's slinger to determine if the slinger has a gradual slope.
FIGURE 1: AREA OUTBOARD AND ABOVE NOSE LANDING GEAR WHEEL WELL - INSPECT LEFT ANGLE
OF ATTACK SENSOR - SLINGER
(SHEET 1 OF 1)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
26 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 27

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
(a)1-SENSOR, ANGLE OF
ATTACK
Inspect1
(a) Do a general visual inspection of the AOA sensor's slinger to determine if the slinger has a gradual slope.
FIGURE 2: AREA OUTBOARD AND ABOVE NOSE LANDING GEAR WHEEL WELL - INSPECT RIGHT
ANGLE OF ATTACK SENSOR - SLINGER
(SHEET 1 OF 1)
Export Controlled ECCN: 9E991
Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 06, 2018
767-34A0828
27 of 29
BOEING SERVICE BULLETIN 767-34A0828
ALERTALERT

### Page 28 (OCR)

BOEING SERVICE BULLETIN 767-34A0828
ALERT  ALERT
0000
ANGLE OF ATTACK SENSOR  2830376
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
Step  Task  Name  Identification  Qty  More Data
1  Inspect  SENSOR, ANGLE OF  1  Inspect for part
ATTACK  number.
FIGURE 3: AREA OUTBOARD AND ABOVE NOSE LANDING GEAR WHEEL WELL - INSPECT LEFT ANGLE
OF ATTACK SENSOR - PART NUMBER
(SHEET 1 OF 1)
Original Issue: December 06, 2018
Export Controlled ECCN: 9E991  767-34A0828
Copyright © Unpublished
Work - See page 1 for details.  28 of 29

### Page 29 (OCR)

BOEING SERVICE BULLETIN 767-34A0828
ALERT  ALERT
000.
ANGLE OF ATTACK SENSOR
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
Step  Task  Name  Identification  Qty  More Data
Inspect  SENSOR, ANGLE OF  1  Inspect for part
ATTACK  number.
FIGURE 4: AREA OUTBOARD AND ABOVE NOSE LANDING GEAR WHEEL WELL - INSPECT RIGHT
ANGLE OF ATTACK SENSOR - PART NUMBER
(SHEET 1 OF 1)
Original Issue: December 06, 2018
Export Controlled ECCN: 9E991  767-34A0828
Copyright © Unpublished
Work - See page 1 for details.  29 of 29

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
