# Boeing Alert Service Bulletin 767-53A0266: No revision named, from page 37

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2015-4210; AD 2016-13-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 767-53A0266](https://openairdocs.org/service-documents/boeing/767-53a0266.md)
- Title as filed: U.S. DOT/FAA - SB 767-53A0266  R0
- Pages: 41
- PDF: https://openairdocs.org/files/sha256/03/aa/03aa4e4eefb97582192d64aac429f756e14460d4bf8d55ffdabc15f8123f6306
- Page: https://openairdocs.org/service-documents/boeing/767-53a0266/file/03aa4e4eefb9

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 37

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
Six rivets on aft row
of each of three
splice plates. (a) (b)
18BACR15FT6D8CRivetInstall (New)1
(a) Refer to 767-200 SRM 51-40-02, 767-200SF SRM 51-40-02, 767-300 SRM 51-40-02, 767-300F SRM
51-40-02, 767-300BCF SRM 51-40-02 or 767-400 SRM 51-40-02 as an accepted procedure. Refer to
767-200 SRM 51-40-05, 767-200SF SRM 51-40-05, 767-300 SRM 51-40-05, 767-300F SRM 51-40-05,
767-300BCF SRM 51-40-05 or 767-400 SRM 51-40-05 for hole quality specifications.
(b) Alternative fastener installation in accordance with 767-200 SRM 51-40-03, 767-200SF SRM 51-40-03,
767-300 SRM 51-40-03, 767-300F SRM 51-40-03, 767-300BCF SRM 51-40-03 or 767-400 SRM 51-40-
03 is allowed. Also, installation of BACB30VT6K*X and BACC30BL6 in a transition fit hole is acceptable.
FIGURE 3: AFT PRESSURE BULKHEAD - PRESSURE CHORD SPLICE PLATES - FASTENER
INSTALLATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 20, 2015
767-53A0266
37 of 41
BOEING SERVICE BULLETIN 767-53A0266
ALERTALERT

### Page 38 (OCR)

BOEING SERVICE BULLETIN 767-53A0266
ALERT  ALERT
This Figure applies only to: Group 1; Group 2, Configuration 2; Group 4.
BULKHEAD WEB
1) 6 LOCATIONS  STA
1582
B
S-11L
TO
S-12L
SKIN
INBD
SPLICE PLATE
(TYPICAL)
S-11R
_ TO
S-12R
FWD
NOTE:
SOME AFFECTED AIRPLANE CONFIGURATIONS HAVE
SHORT STIFFENERS AT THE AFT PRESSURE
BULKHEAD TO PRESSURE CHORD JOINT.  S-24L
SHORT STIFFENERS ARE NOT SHOWN FOR CLARITY.
FIGURE 4: AFT PRESSURE BULKHEAD - PRESSURE CHORD SPLICE PLATES - FASTENER
INSTALLATION
(SHEET 1 OF 2)
Original Issue: April 20, 2015
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  38 of 41

### Page 39

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
More DataQtyIdentificationNameTaskStep
Six rivets on aft row
of each of four splice
plates. (a) (b)
24BACR15FT6D8CRivetInstall (New)1
(a) Refer to 767-200 SRM 51-40-02, 767-200SF SRM 51-40-02, 767-300 SRM 51-40-02, 767-300F SRM
51-40-02, 767-300BCF SRM 51-40-02 or 767-400 SRM 51-40-02 as an accepted procedure. Refer to
767-200 SRM 51-40-05, 767-200SF SRM 51-40-05, 767-300 SRM 51-40-05, 767-300F SRM 51-40-05,
767-300BCF SRM 51-40-05 or 767-400 SRM 51-40-05 for hole quality specifications.
(b) Alternative fastener installation in accordance with 767-200 SRM 51-40-03, 767-200SF SRM 51-40-03,
767-300 SRM 51-40-03, 767-300F SRM 51-40-03, 767-300BCF SRM 51-40-03 or 767-400 SRM 51-40-
03 is allowed. Also, installation of BACB30VT6K*X and BACC30BL6 in a transition fit hole is acceptable.
FIGURE 4: AFT PRESSURE BULKHEAD - PRESSURE CHORD SPLICE PLATES - FASTENER
INSTALLATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 20, 2015
767-53A0266
39 of 41
BOEING SERVICE BULLETIN 767-53A0266
ALERTALERT

### Page 40

This Appendix applies only to: Group 2, Configuration 1; Group 3-4.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
FASTENER REMOVAL AND OPEN HOLE HFEC INSPECTION.PART 2
ANY CRACK FOUND IN THE AFT PRESSURE BULKHEAD WEB.CONDITION 1
NO CRACK FOUND IN THE AFT PRESSURE BULKHEAD WEB.CONDITION 2
APPENDIX A:  LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE TABLE 1: AFT PRESSURE
BULKHEAD WEB INSPECTIONS AT PRESSURE CHORD JOINT.
(SHEET 1 OF 1)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 20, 2015
767-53A0266
40 of 41
BOEING SERVICE BULLETIN 767-53A0266
ALERTALERT

### Page 41 (OCR)

BOEING SERVICE BULLETIN 767-53A0266
ALERT  ALERT
This Appendix applies only to: Group 1; Group 2, Configuration 2.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
Title  Description
PART 2  FASTENER REMOVAL AND OPEN HOLE HFEC INSPECTION.
CONDITION 1  ANY CRACK FOUND IN THE AFT PRESSURE BULKHEAD WEB.
CONDITION 2  NO CRACK FOUND IN THE AFT PRESSURE BULKHEAD WEB.
WHICHEVER OCCURS LATER
WITHIN 37,500 FLIGHT  WITHIN 3,000 FLIGHT
CYCLES AFTER  CYCLES AFTER THE
REPLACEMENT OF THE  ORIGINAL ISSUE DATE OF
AFT PRESSURE BULKHEAD  THIS SERVICE BULLETIN
DO PART 2
CONDITION 1  CONDITION 2
NOT TO EXCEED 12,000
BEFORE FURTHER FLIGHT  FLIGHT CYCLES
CONTACT THE BOEING
COMPANY FOR REPAIR  REPEAT PART 2
INSTRUCTIONS AND DO THE
REPAIR
2406028
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E. COMPLIANCE TABLE 2: AFT PRESSURE
BULKHEAD WEB INSPECTIONS AT PRESSURE CHORD JOINT.
(SHEET 1 OF 1)
Original Issue: April 20, 2015
Export Controlled ECCN: 9E991 - BOEING  767-53A0266
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  41 of 41

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
