# Boeing Alert Service Bulletin 777-24A0119: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0595; AD 2012-23-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 777-24A0119](https://openairdocs.org/service-documents/boeing/777-24a0119.md)
- Title as filed: U.S. DOT/FAA - Service Information
- Pages: 41
- PDF: https://openairdocs.org/files/sha256/61/00/61005fb519b41d758777ae4dbf5c9a448720192dade42ce968e09e98ddd3b983
- Page: https://openairdocs.org/service-documents/boeing/777-24a0119/file/61005fb519b4

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
777
Service Bulletin
ALERT
Number: 777-24A0119
Original Issue: November 11, 2011
ATA System: 2421 5383
SUBJECT: ELECTRICAL POWER - Power and Regulation - Inspection and if Necessary, Repair
of Clamps, Power Feeder Cable, Insulation Blanket and Aft Pressure Bulkhead
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2011 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
1 of 41
4.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
2 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A. Effectivity ................................................ 9
1. Airplanes ............................................. 9
2. Spares Affected ........................................ 1 3
B. Concurrent Requirements ...................................... 1 3
C. Reason ................................................ 1 4
D. Description .............................................. 1 4
E. Compliance .............................................. 1 5
F. Approval ............................................... 1 5
G. Manpower .............................................. 1 5
H. Weight and Balance Changes .................................... 1 6
I. Electrical Load Data ......................................... 1 6
J. References .............................................. 1 6
1. Existing Data .......................................... 1 6
2. Data supplied with this Service Bulletin ............................ 1 7
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 1 7
K. Publications Affected ........................................ 1 7
L. Interchangeability and Intermixability of Parts ........................... 1 7
2. MATERIAL INFORMATION ........................................ 1 9
A. Material - Price and Availability ................................... 1 9
B. Industry Support Information .................................... 1 9
C. Parts Necessary For Each Airplane ................................. 1 9
1. Kits/Parts ............................................ 1 9
2. Parts and Materials Supplied by the Operator ........................ 2 0
3. Parts Modified and Reidentified ................................ 2 0
4. Parts Removed and Not Replaced .............................. 2 0
D. Parts Necessary to Change Spares ................................. 2 0
E. Special Tooling - Price and Availability ............................... 2 0
F. Special Tooling Necessary to do this Service Bulletin ....................... 2 0
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 1
A. GENERAL INFORMATION ..................................... 2 1
B. WORK INSTRUCTIONS ....................................... 2 2
FIGURE 1: ACCESS ............................................ 2 6
FIGURE 2: INSPECTION .......................................... 2 8
FIGURE 3: REPLACEMENT AND REPAIR ................................ 3 3
APPENDIX A: CONDUCTIVITY TEST EXAMPLES ............................. 3 8
APPENDIX B: INDIRECT CONDUCTIVITY EDDY CURRENT INSPECTION ................ 3 9
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
3 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 4

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
4 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
777
Service Bulletin
ALERT
SummaryNumber: 777-24A0119Original Issue: November 11, 2011
ATA System: 2421 5383
SUBJECT: ELECTRICAL POWER - Power and Regulation - Inspection and if Necessary, Repair
of Clamps, Power Feeder Cable, Insulation Blanket and Aft Pressure Bulkhead
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Accomplishment of this service bulletin will prevent failure of the clamp at station 2150 between stringer 3R and
4R, and within the section 48 flammable fluid leakage zone. If not incorporated, a failed clamp can result in wire
chafing and potential electrical arcing which might cause a fire in section 48 which is identified as flammable
fluid leakage zone, or heat damage to the Auxiliary Power Unit (APU) power feeder cable, insulation blankets
and/or pressure bulkhead at station 2150.
An operator has reported failure of the clamp at station 2150 and between stringer 3R and 4R in the forward
section of the aft pressure bulkhead. The chafing caused by the failed clamp resulted in heat damage to the
APU power feeder cables, insulation blankets, and the pressure bulkhead adjacent to the clamp.
This service bulletin gives the instructions to do a Detailed Inspection of the clamps at station 2150 and in the
48 section aft of the pressure bulkhead. If non-TA clamps, or damage to the cable, blankets and the pressure
bulkhead are found, this service bulletin gives procedures to replace the existing non-TA clamps with the TA
clamps, and to repair the cable, the blanket and the pressure bulkhead if required.
Boeing Service Related Problem (SRP) 777-SRP-24-0139 is related to this service bulletin. This SRP is described
in Fleet Team Digest Article 777 FTD 24-10003.
ACTION (PRR 62777-84S)
Gain access to the APU power feeder cable between stringer 3R and 4R at station 2150.
Gain access to the APU power feeder cable in the 48 section.
Do a Detailed Inspection of the clamps on the APU power feeder cable. Replace the existing non-TA clamps
with the TA clamps.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
5 of 41

### Page 6

Do a General Visual Inspection of the APU power feeder cable for cable damage. Repair damaged cable if
found.
Do a General Visual Inspection of the insulation blanket adjacent to the clamp at station 2150 and between
stringer 3R and 4R. Repair damaged insulation blanket if found.
Do a test to determine damage to the aft pressure bulkhead and structure. Contact Boeing for repair instructions
if damage is found.
Close access.
EFFECTIVITY
777-200, 777-200LR, 777-300, 777-300ER, and 777F Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the
list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the change given in this service bulletin be done within 48 months of the original issue
of this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of July 22, 2010. Please refer to Paragraph
2.B., Industry Support Information.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
6 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 7 (OCR)

BOEING SERVICE BULLETIN 777-24A0119
ALERT  ALERT
STA
2150
-INSPECT TA CLAMPS, APU POWER
FEEDER CABLE, INSULATION BLANKET
- REPLACE WITH TA CLAMP (IF REQUIRED)
- REPAIR WIRE BUNDLE (IF REQUIRED)
- REPAIR INSULATION BLANKET (IF REQUIRED)
-DO TEST TO FIND HEAT DAMAGE TO AFT
PRESSURE BULKHEAD AND STRUCTURE
(IF REQUIRED)
APU POWER
FEEDER CABLE
CLAMPS
(23 LOCATIONS)
STA
AFT  2150
PRESSURE
BULKHEAD
2084085
Original Issue: November 11, 2011
BOEING PROPRIETARY -  777-24A0119
Copyright © Unpublished Work - See page 1 for details.  7 of 41

### Page 8

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
8 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
777
Service Bulletin
ALERT
Number: 777-24A0119
Original Issue: November 11, 2011
ATA System: 2421 5383
SUBJECT: ELECTRICAL POWER - Power and Regulation - Inspection and if Necessary, Repair
of Clamps, Power Feeder Cable, Insulation Blanket and Aft Pressure Bulkhead
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D624W001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is for the airplanes shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR 62777-84S for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
Freighter Airplanes-1
Passenger Airplanes-2
Airplane Models:
777-200, 777-200LR, 777-300, 777-300ER, 777F
GroupVariable Number
2WA001 - WA017
2WA076 - WA079
2WA086 - WA093
2WA101 - WA104
2WA116 - WA119
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
9 of 41

### Page 10

GroupVariable Number
2WA131 - WA137
2WA171 - WA175
2WA196 - WA198
2WA206 - WA212
2WA221 - WA223
2WA231 - WA232
2WA241 - WA250
2WA261 - WA266
2WA281 - WA283
2WA301 - WA304
2WB001 - WB021
2WB031 - WB042
2WB044 - WB046
2WB051 - WB088
2WB101 - WB106
2WB121 - WB125
2WB131 - WB148
2WB151 - WB155
2WB161 - WB177
2WB181 - WB194
2WB201 - WB215
2WB231 - WB247
2WB271 - WB273
2WB276 - WB286
2WB291 - WB302
2WB306 - WB307
2WB311 - WB337
2WB341 - WB342
2WB366 - WB368
2WB371 - WB388
2WB406
2WB411 - WB413
2WB416 - WB439
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
10 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 11

GroupVariable Number
2WB446 - WB453
2WB476
2WB481 - WB484
2WB501 - WB512
2WB531 - WB537
2WB551 - WB554
2WB591 - WB597
2WB601 - WB606
2WB611 - WB622
2WB631 - WB638
2WB646 - WB649
2WC051 - WC073
2WC101 - WC104
2WC111 - WC120
2WC221 - WC224
2WC241 - WC243
2WC281 - WC290
2WC301 - WC308
2WC361 - WC364
2WC371 - WC374
2WC381 - WC395
2WC441
2WC446 - WC449
2WC456 - WC459
2WC486 - WC493
2WC506 - WC508
2WC521 - WC522
2WC531 - WC536
2WC546 - WC548
2WC556
2WC566 - WC567
2WC571 - WC574
2WC581
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
11 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 12

GroupVariable Number
2WD001 - WD002
2WD011 - WD018
2WD031 - WD036
2WD046 - WD055
2WD066 - WD075
2WD081 - WD088
2WD091
2WD096
2WD101 - WD105
2WD111
2WD501 - WD513
2WD521 - WD541
2WD546 - WD554
2WD561 - WD573
2WD581 - WD599
2WD606 - WD609
2WD621 - WD632
2WD651 - WD665
2WD671 - WD677
2WD691 - WD709
2WD741 - WD752
2WD761 - WD771
2WD786 - WD788
2WD796 - WD817
2WD826 - WD837
2WD846 - WD863
2WD871 - WD885
2WD911 - WD915
2WD921 - WD922
2WD936 - WD939
2WD946 - WD953
2WD966 - WD970
2WD981 - WD982
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
12 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 13

GroupVariable Number
2WD986 - WD987
2WD996
2WE001 - WE004
2WE011 - WE012
2WE021 - WE026
2WE031 - WE034
2WE051 - WE053
2WE071
2WE081 - WE082
2WE126 - WE135
2WE151
2WE176 - WE177
2WE186
1WF001 - WF004
1WF016 - WF020
1WF031 - WF032
1WF046 - WF055
1WF076 - WF077
1WF081 - WF088
1WF096 - WF100
1WF106 - WF107
1WF111 - WF112
1WF121 - WF122
1WF131
2. Spares Affected
None.
B. Concurrent Requirements
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
13 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 14

C. Reason
Accomplishment of this service bulletin will prevent failure of the clamp at station 2150 between stringer
3R and 4R, and within the section 48 flammable fluid leakage zone. If not incorporated, a failed clamp
can result in wire chafing and potential electrical arcing which might cause a fire in section 48 which
is identified as flammable fluid leakage zone, or heat damage to the Auxiliary Power Unit (APU) power
feeder cable, insulation blankets and/or pressure bulkhead at station 2150.
An operator has reported failure of the clamp at station 2150 and between stringer 3R and 4R in the
forward section of the aft pressure bulkhead. The chafing caused by the failed clamp resulted in heat
damage to the APU power feeder cables, insulation blankets, and the pressure bulkhead adjacent to
the clamp.
This service bulletin gives the instructions to do a Detailed Inspection of the clamps at station 2150
and in the 48 section aft of the pressure bulkhead. If non-TA clamps, or damage to the cable, blankets
and the pressure bulkhead are found, this service bulletin gives procedures to replace the existing
non-TA clamps with the TA clamps, and to repair the cable, the blanket and the pressure bulkhead if
required.
Boeing Service Related Problem (SRP) 777-SRP-24-0139 is related to this service bulletin. This SRP
is described in Fleet Team Digest Article 777 FTD 24-10003.
D. Description
Gain access to the APU power feeder cable between stringer 3R and 4R at station 2150.
Gain access to the APU power feeder cable in the 48 section.
Do a Detailed Inspection of the clamps on the APU power feeder cable. Replace the existing non-TA
clamps with the TA clamps.
Do a General Visual Inspection of the APU power feeder cable for cable damage. Repair damaged
cable if found.
Do a General Visual Inspection of the insulation blanket adjacent to the clamp at station 2150 and
between stringer 3R and 4R. Repair damaged insulation blanket if found.
Do a test to determine damage to the aft pressure bulkhead and structure. Contact Boeing for repair
instructions if damage is found.
Close access.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
312, 314777F
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
14 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 15

Group 2:
Affected Maintenance Zones
ZoneModel
312, 314777-200, 777-200LR, 777-300,
777-300ER
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 48 months of the
original issue of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Group 1:
Elapsed HoursTask HoursNumber of PersonsTask
0.500.501Open Access
0.500.501Figure 1
3.253.251Figure 2
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
15 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 16

Group 1:
Elapsed HoursTask HoursNumber of PersonsTask
2.50(a)2.50(a)1Figure 3
(b)(b)Test (If required)
1.001.001Close Access
7.757.75TOTAL FOR EACH AIRPLANE
(a) Estimate assumes no repair is required to APU power feeder cable or insulation
blankets. If repair is required more time may be required
(b) Estimate assumes no test time is required. If testing is required more time will
be required.
Group 2:
Elapsed HoursTask HoursNumber of PersonsTask
0.500.501Open Access
0.250.251Figure 1
3.253.251Figure 2
2.50(a)2.50(a)1Figure 3
(b)(b)Test (If required)
0.750.751Close Access
7.257.25TOTAL FOR EACH AIRPLANE
(a) Estimate assumes no repair is required to APU power feeder cable or insulation
blankets. If repair is required more time may be required.
(b) Estimate assumes no test time is required. If testing is required more time will
be required.
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data
a. Engineering Change Memo PRR 62777-84S
b. Standard Wiring Practices Manual (SWPM) 20-10-11, 20-10-12, 20-10-13, 20-10-19
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
16 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 17

c. 777 Aircraft Maintenance Manual (AMM) 20-10-22, 24-22-00, 25-21-06, 25-21-07, 25-59-01,
25-80-00, 52-48-05, 52-48-06
d. 777 Fleet Team Digest (FTD) 24-10003
e. 777 Non-Destructive Testing (NDT) Manual Part 6, 51-00-08
f. Service Related Problem (SRP) 777-SRP-24-0139
2. Data supplied with this Service Bulletin
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin
TitleDrawing Number
WIRE BUNDLE INSTL - R.S. UPR SWL W/AFT PRESS BLKHD
(STA 2150 - 2414) & FW BLKHD (FWD)
288W4800
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS but no new DTIs are necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
17 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 18

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
18 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT
BLANK PAGE

### Page 19

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary for Each Airplane. Operators
are encouraged to share schedule requirements with Boeing for incorporation of the service bulletin.
The kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment.
Prices are in United States Dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of these methods:
1. Order on-line via ATA Spec 2000 or The Boeing PART Page
2. Fax to (206) 662-7145
Group 1-2:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the original issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
original issue
date of this Ser-
vice Bulletin (Cal-
endar Days)
QTYDateNameKit Number
$500.0014910July 01, 2011APU Power Feeder
Clamp Replacement
005W3505-1
$500.0014910August 01,
2011
APU Power Feeder
Clamp Replacement
005W3505-1
$500.0014910August 29,
2011
APU Power Feeder
Clamp Replacement
005W3505-1
$500.0014910September 27,
2011
APU Power Feeder
Clamp Replacement
005W3505-1
$500.001499October 25,
2011
APU Power Feeder
Clamp Replacement
005W3505-1
B. Industry Support Information
Boeing warranty remedies are available for 777 airplanes in warranty as of July 22, 2010. For task hour
reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing Commercial
Airplanes Group - Warranties. The kits for airplanes in warranty as of that date will be supplied at no
charge. Send a purchase order for the kits to Boeing Spares. Please refer to this service bulletin number
and reference the airplane number in your purchase order.
C. Parts Necessary For Each Airplane
1. Kits/Parts
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
19 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 20

NOTE: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, are necessary for each airplane.
Group 1-2:
Kit 005W3505
NotesExisting Part
Number
NameQTYNew Part Number
-1
TOPKIT - APU
Power Feeder
Clamp Replace-
ment
-005W3505-1
(a)CLAMP25TA027063-22P
(a)CLAMP25TA027063-24P
(a) There are more parts than are necessary
2. Parts and Materials Supplied by the Operator
None.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
20 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 21

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. The work instructions are divided into work packages. Task Hours and Elapsed Hours
for each package are given in Paragraph 1.G., Manpower. You can do each work
package independently.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque limits to tighten nuts and bolts are in SRM Chapter 51
5. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures,
and SWPM 20-10-19 for the wire separation requirements, as accepted procedures.
6. The necessary conditions for selection of clamp type and size are included in SWPM
20-10-12. If any wire bundle support clamp specified in this service bulletin does not
make a correct fit on the wire bundle, refer to SWPM 20-10-12 as an accepted
procedure to select a clamp that fits correctly.
7. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51.
8. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
21 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 22

9. A Special Detailed Inspection is defined as: An intensive examination of a specific
item,installation, or assembly to detect damage, failure, or irregularity. The
examination is likely to make extensive use of specialized Inspection techniques
and/or equipment. Intricate cleaning and substantial access or disassembly procedure
may be required.
10. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance unless otherwise
specified. A mirror may be necessary to enhance visual access to all exposed surfaces
in the inspection area. This level of inspection is made under normally available
lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may
require removal or opening of access panels or doors. Stands, ladders or platforms
may be required to gain proximity to the area being checked.
11. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
12. Refer to Appendix A for heat damage inspection referencing example.
13. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
14. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
15. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
16. This service bulletin includes functional test procedures for the systems changed by
this service bulletin. More functional tests can possibly be necessary in accordance
with standard maintenance practices because of interruption to other airplane systems.
B. WORK INSTRUCTIONS
1. Remove electrical power from the airplane. Refer to 777 AMM 24-22-00 as an accepted procedure.
2. Group 1:
Gain access to the APU power feeder cable at station 2150 and between stringer 3R and 4R in
accordance with Figure 1. Open the access door in the aft bulkhead cargo center panel. Refer to
777 AMM 25-59-01 as an accepted procedure.
Group 2:
Gain access to the APU power feeder cable at station 2150 and between stringer 3R and 4R in
accordance with Figure 1. Open the ceiling panel of the aft A2 and A3 galley. Refer to 777 AMM
25-21-06 and 777 AMM 25-21-07 as an accepted procedure.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
22 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 23

Group 1-2:
Gain access to the APU power feeder cable in the 48 section in accordance with Figure 1. Open
the access door 311BL and 313AL. Refer to 777 AMM 52-48-05 and 777 AMM 52-48-06 as an
accepted procedure.
3. Do a Detailed Inspection of the clamps on the APU power feeder cable at station 2150, and in the
48 section in accordance with Figure 2.
a. If TA027063 clamps are used, do steps 10, 11 and 12.
b. If non-TA027063 clamps are used, proceed to step 4.
4. Do a General Visual Inspection of the APU power feeder cables in accordance with Figure 2.
a. If no damage to the cable is found, do steps 8, 10, 11 and 12.
b. If damage to the cable is found, proceed to step 5.
5. Do a General Visual Inspection of the insulation blanket adjacent to the clamp at station 2150 and
between stringer 3R and 4R for possible heat damages in accordance with Figure 2.
a. If no heat damage to the insulation blanket is found, do steps 7, 8, 10, 11 and 12.
b. If heat damage to the insulation blanket is found, proceed to step 6.
6. Do a heat damage inspection on the pressure bulkhead and structure in accordance with the
instructions below.
a. Perform a detailed inspection of the Section 47 and 48 fuselage structure within 42 inches of
the APU feeder clamp. This includes the skin, stringers, and end fittings on either side of
station 2150, the aft pressure dome web, radial stiffeners, intermediate stiffeners, the station
2150 inner chord, outer chord, failsafe chord (Y-chord), doublers, triplers, circumferential tear
straps and web. Inspect for the following indications of heat damage:
(1) Primer discoloration
(2) Structural deterioration
b. If visual indications of heat damage are found, do steps 6.c through 6.f.
c. Remove loose paint, dirt and sealant from the surface of the inspection area. Refer to 777
AMM 20-10-22 as an accepted procedure.
NOTE: 1. Do not remove the finishes to perform conductivity.
2. Do not use abrasive materials to remove paint, dirt and sealant.
d. With a felt tipped marker, create a 1.00 inch by 1.00 inch grid across the skin locations thought
to be heat damaged and number the grid. For all other structure mark the part into 1.00 inch
sections. Refer to Appendix A, Grid Creation Example, as an accepted procedure.
e. Do a Special Detailed Inspection of the aluminum part for heat damage.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
23 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 24

(1) If space is not restrictive, do the Inspection for Heat Damage to Aluminum Structure, refer
to 777 NDT Part 6, 51-00-08 as an accepted procedure and proceed to step 6.f.
(2) If space is restrictive, standard conductivity probes may not fit in the tight areas, such as
the failsafe chord (Y-chord). If the manufacturer of the conductivity test equipment cannot
provide a probe to fit into the area of interest, refer to Appendix B, Indirect Conductivity
Eddy Current Inspection, as an accepted procedure.
NOTE: 1. Conductivity is very sensitive on materials with a clad layer. Do not remove the
primer on any parts. Measure the conductivity of all parts through the primer.
2. Because the stringer end fittings common to station 2150 are small, measure a
similar end fitting away from the damage that is similar in size and gage. Be sure to
measure the conductivity of the fitting in three locations, near the tension bolts, at
the neck of the fitting and near the stringer attachment fasteners.
3. The baseline conductivity values should be measured away from the area thought
to be heat damaged. These values should be measured on the same part and gage.
4. Measure the undamaged area at two to three locations and take average value
as the baseline conductivity.
5. Record conductivity of each box in the grid created in a spreadsheet. Refer to
Appendix A, Conductivity Table for Skin and Other Structure Example as an accepted
procedure.
f. Do analysis of the inspection results.
(1) If any areas deviate greater than 1% International Annealed Copper Standard (IACS)
from the baseline conductivity reading (for example: the baseline percent IACS is 34,
IACS measurement less than 33 or more than 35 is deviation), do steps 6.f.(1).(a),
6.f.(1).(b), 6.f.(1).(c), 7, 8, 9, 10, 11 and 12.
(a) Contact Boeing for repair instruction
(b) Provide the following to Boeing:
1) Measured conductivity values for all structure listed in 6.a that is within 21 inches
of the areas showing evidence of discoloration or deterioration due to the fire.
2) Detailed digital photos of the structure marked with the grid.
3) Dimensions of the heat damage and distances to surrounding structure, such
as radial stiffeners, intermediate stiffeners, circumferential tear straps, doublers,
triplers and the station 2150 failsafe chord (Y-Chord).
(c) Do the repair in accordance to the instruction from Boeing.
(2) If no damage to the pressure bulkhead is determined, do steps 7, 8, 9, 10, 11 and 12.
7. Do the repair for APU power feeder cable in accordance with Figure 3.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
24 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 25

8. Do the replacement of the existing non-TA027063 clamps with TA027063 clamps in accordance
with Figure 3.
9. Do the repair for insulation blanket in accordance with Figure 3.
10. Group 1:
Close access. Refer to 777 AMM 25-59-01, Main Deck Cargo Compartment Lining Panels, as an
accepted procedure.
Group 2:
Close access. Refer to 777 AMM 25-21-06, Main Ceiling Panel and 777 AMM 25-21-07, Lowered
Ceiling Panel, as an accepted procedure.
Group 1-2:
Close access. Refer to 777 AMM 52-48-05, Service Access Door and 777 AMM 52-48-06, Controls
Bay Access Door, as an accepted procedure.
11. Restore the electrical power to the airplane. Refer to 777 AMM 24-22-00 as an accepted procedure.
12. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
25 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 26 (OCR)

BOEING SERVICE BULLETIN 777-24A0119
ALERT  ALERT
CEILING ACCESS
PANEL
ACCESS
DOOR, 313AL
ACCESS DOOR,
311BL
(GROUP 1 AND 2)
AFT MAIN CARGO COMPARTMENT
FWD
(GROUP 1)
• LOWERE
/ CEILIN
ACCESS PANEL
FWD  LOWERED CEILING AREA  (TYPICAL)  2084045
(GROUP 2)
FIGURE 1: ACCESS
(SHEET 1 OF 2)
Original Issue: November 11, 2011
777-24A0119
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  26 of 41

### Page 27

More DataQtyIdentificationNameTaskStep
--Access PanelLocate1
--Access DoorLocate2
FIGURE 1: ACCESS
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
27 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 28 (OCR)

BOEING SERVICE BULLETIN 777-24A0119
ALERT  ALERT
STA
2150
APU POWER  STAO
FEEDER CABLE
THROUGH
STA
AFT  2150
PRESSURE
BULKHEAD
2083036
FIGURE 2: INSPECTION
(SHEET 1 OF 5)
Original Issue: November 11, 2011
777-24A0119
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  28 of 41

### Page 29 (OCR)

BOEING SERVICE BULLETIN 777-24A0119
ALERT  ALERT
STA
2150
S-3R  W7850
S-4R
2083278
FIGURE 2: INSPECTION
(SHEET 2 OF 5)
Original Issue: November 11, 2011
BOEING PROPRIETARY -  777-24A0119
Copyright © Unpublished Work - See page 1 for details.  29 of 41

### Page 30 (OCR)

BOEING SERVICE BULLETIN 777-24A0119
ALERT  ALERT
STA
2245.7
STA
2293.5
2083711
FIGURE 2: INSPECTION
(SHEET 3 OF 5)
Original Issue: November 11, 2011
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.

### Page 31 (OCR)

BOEING SERVICE BULLETIN 777-24A0119
ALERT  ALERT
STA
2319
W7850
STA
2370
STA
2392
W7850
-WD  2083788
FIGURE 2: INSPECTION
(SHEET 4 OF 5)
Original Issue: November 11, 2011
BOEING PROPRIETARY -  777-24A0119
Copyright © Unpublished Work - See page 1 for details.  31 of 41

### Page 32

More DataQtyIdentificationNameTaskStep
Do a Detailed Inspec-
tion of the clamps.
--CLAMPSInspect1
Note: The color of
the clamp cushion
material for
TA027063 is brown,
any other color is
considered non-
TA027063 clamps.
If non-TA027063
clamps are used, do
a General Visual In-
spection of the APU
power feeder cable
for damage.
1W7850APU Power Feeder
Cable
Inspect2
If APU power feeder
cable is damaged,
do a General Visual
Inspection of the in-
sulation blanket for
heat damage.
--Insulation BlanketInspect3
FIGURE 2: INSPECTION
(SHEET 5 OF 5)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
32 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 33 (OCR)

BOEING SERVICE BULLETIN 777-24A0119
ALERT  ALERT
STA
2150
APU POWER
FEEDER CABLE
THROUGH C
STA
AFT  2150
PRESSURE
BULKHEAD
2087703
FIGURE 3: REPLACEMENT AND REPAIR
(SHEET 1 OF 5)
Original Issue: November 11, 2011
BOEING PROPRIETARY -  777-24A0119
Copyright © Unpublished Work - See page 1 for details.  33 of 41

### Page 34 (OCR)

BOEING SERVICE BULLETIN 777-24A0119
ALERT  ALERT
STA
123  2150
S-3R  W7850
S-4R
EWO
2087704
FIGURE 3: REPLACEMENT AND REPAIR
(SHEET 2 OF 5)
Original Issue: November 11, 2011
777-24A0119
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  34 of 41

### Page 35 (OCR)

BOEING SERVICE BULLETIN 777-24A0119
ALERT  ALERT
STA
2245.7
STA
2293.5
2087707
FIGURE 3: REPLACEMENT AND REPAIR
(SHEET 3 OF 5)
Original Issue: November 11, 2011
777-24A0119
Copyright © Unpublished Work - See page 1 for details.  BOEING PROPRIETARY -  35 of 41

### Page 36 (OCR)

BOEING SERVICE BULLETIN 777-24A0119
ALERT  ALERT
STA
2319
W7850
STA
237
STA
2392
Vang
W7850
2087708
FIGURE 3: REPLACEMENT AND REPAIR
(SHEET 4 OF 5)
Original Issue: November 11, 2011
777-24A0119
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  36 of 41

### Page 37

More DataQtyIdentificationNameTaskStep
If non-TA027063
clamps are found,
refer to SWPM 20-
10-12 as an accept-
ed procedure. See
the extra parts table
for different clamp
size, if necessary.
23TA027063-22PCLAMPInstall (New)1
If damage is found,
refer to SWPM 20-
10-13 as an accept-
ed procedure.
1W7850APU Power Feeder
Cable
Repair2
If damage is found,
refer to 777 AMM
25-80-00 as an ac-
cepted procedure.
1-Insulation BlanketRepair3
The parts shown in the table below are provided as extra parts for this figure.
More DataQtyIdentificationName
2TA027063-22PCLAMP
Use TA027063-24P clamps if re-
quired.
25TA027063-24PCLAMP
FIGURE 3: REPLACEMENT AND REPAIR
(SHEET 5 OF 5)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
37 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 38 (OCR)

BOEING SERVICE BULLETIN 777-24A0119
ALERT  ALERT
Area of Heat
Damage
123456789
G
Skin Panel
3 Other Structure
GRID CREATION EXAMPLE
Structure: Skin Panel
3
A
B
D
F
G
Average Baseline Conductivity:
Structure: Radial Stiffener
Average Baseline Conductivity:
CONDUCTIVITY TABLE FOR SKIN AND OTHER
STRUCTURE EXAMPLE
APPENDIX A: CONDUCTIVITY TEST EXAMPLES
(SHEET 1 OF 1)
Original Issue: November 11, 2011
BOEING PROPRIETARY -  777-24A0119
Copyright © Unpublished Work - See page 1 for details.  38 of 41

### Page 39

1. Purpose
Use this indirect conductivity eddy current procedure to evaluate aluminum structure for heat damage when
a standard probe of conductivity instrument will not fit into the an area with limited clearance.
This eddy current procedure uses an impedance plane display instrument. It is not considered as accurate
as a standard conductivity instrument.
2. Equipment
a. Instrument
Use an impedance plane display eddy current instrument that operates at a frequency range of 100
kHz to 500 kHz. A Hocking Phasec 2200 eddy current instrument was used to help prepare this
procedure.
b. Probes
Use a shielded differential type probe with outer diameter of approximately 0.125 inch (3.2mm) that
operates from 100 to 500 kHz. An NDT Engineering Inc (Olympus) MP-30 probe is an example of a
suitable probe.
NOTE: Use a probe that is not sensitive to hand pressure.
c. Reference Standard
Use two certified conductivity standards with values as follows:
(1) One standard should have a conductivity value between 34 - 43% IACS (34 - 36 preferred).
(2) One standard with a conductivity value between 26 - 29.5% IACS.
3. Preparation for Inspection
a. Get access to the areas in step 6 of Work Instructions, paragraph 3.B where visual inspections indicated
potential heat damage.
b. Remove all dirt and grease from the inspection areas that the probe will touch.
4. Instrument Calibration
a. Connect the probe to the instrument.
b. Set the instrument frequency to 150 kHz.
c. Put the probe on the conductivity reference standard with the highest conductivity.
d. Balance the instrument as specified by the manufacturer's instructions.
APPENDIX B:  INDIRECT CONDUCTIVITY EDDY CURRENT INSPECTION
(SHEET 1 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
39 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 40

e. Set the balance point at approximately 20% of full screen height and 60% full screen width. Refer to
Appendix B, Calibration Screen Display Example, Point 1, as an accepted procedure.
f. Set the lift-off (phase) so that the signal moves horizontally from right to left when the probe is lifted off
the reference standard. Refer to Appendix B, Calibration Screen Display Example, as an accepted
procedure.
g. Put the probe on the conductivity reference standard with the lowest conductivity.
h. Adjust the instrument gain to set the signal at 80%FSH (60% full screen height separation between
the two signals). Refer to Appendix B, Calibration Screen Display Example, Point 2, as an accepted
procedure.
i. Do steps 4.c through 4.h in Appendix B again to make sure that there is a 60% full screen height
separation between the two signals.
NOTE: Change probes or increase the instrument frequency if you can not get the 60% full screen
height separation between the two signals.
j. The conductivity of the part can be estimated by extrapolating the vertical position of the signal as
compared to the two known conductivity standards.
5. Inspection Procedure
a. Put the probe on the high conductivity standard and balance the instrument again.
b. Put the probe on the suspect structure (e.g. failsafe chord (Y-chord)) at a location away from the possible
damage and quickly read the vertical height of the signal. Record this instrument reading.
c. Move the probe towards the damage to see if there is a change in signal height. Heat damage will
cause the signal to decrease in height (indicating increased conductivity). If there are no changes to
the signal height, there is no heat damage to the Y-chord.
d. If there is a change in the signal height, take careful readings to estimate the conductivity values. Before
each reading, put the probe on the high conductivity standard and balance the instrument before putting
the probe back on to the part. The conductivity of the part can be estimated by extrapolating the vertical
position of the signal as compared to the two known conductivity standards.
NOTE: It is very important to have the conductivity standards the same temperature as the part to be
examined. Put the standards near the inspection part before starting the calibration to make
sure they are the same temperature. Holding the probe on the standard or part for too long
can cause the probe tip to get warm and the reading to change. Make sure that the instrument
reads the correct value on the test standard before taking a reading on the part. Balance the
instrument often on the high conductivity standard and take the readings quickly.
e. Record conductivity of each box in the grid created in a spreadsheet. Refer to Appendix A, Conductivity
Table for Skin and Other Structure Example, as an accepted procedure.
6. Inspection Results
APPENDIX B:  INDIRECT CONDUCTIVITY EDDY CURRENT INSPECTION
(SHEET 2 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
40 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

### Page 41

Proceed to step 6.f of Work Instruction, paragraph 3.B.
APPENDIX B:  INDIRECT CONDUCTIVITY EDDY CURRENT INSPECTION
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 11, 2011
777-24A0119
41 of 41
BOEING SERVICE BULLETIN 777-24A0119
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
