# Boeing Alert Service Bulletin 777-25A0677: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-9384; AD 2017-13-14 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 777-25A0677](https://openairdocs.org/service-documents/boeing/777-25a0677.md)
- Title as filed: SB 777-25A0677
- Pages: 29
- PDF: https://openairdocs.org/files/sha256/14/1d/141d65372196694333a03192729e78ee02e6800b7cad4c84173625739513ba5c
- Page: https://openairdocs.org/service-documents/boeing/777-25a0677/file/141d65372196

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
777
Service Bulletin
ALERT
Number: 777-25A0677
Original Issue: April 25, 2016
ATA System: 2531
SUBJECT: EQUIPMENT FURNISHINGS - Galley - A2 and A3 Galley Hardware Installation
Inspection
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2016 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: April 25, 2016
777-25A0677
1 of 29
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
2 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 12
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 13
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 13
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
FIGURE 1: A2 GALLEY - HARDWARE INSTALLATION - INSPECTION . . . . . . . . . . . . . . . . 18
FIGURE 2: A3 GALLEY - HARDWARE INSTALLATION - INSPECTION . . . . . . . . . . . . . . . . 20
FIGURE 3: A2 GALLEY - T53 TIE ROD PIN - INSTALLATION . . . . . . . . . . . . . . . . . . . . . . 22
FIGURE 4: A3 GALLEY - T52 TIE ROD PIN - INSTALLATION . . . . . . . . . . . . . . . . . . . . . . 24
FIGURE 5: A2 GALLEY - T53 TIE ROD BOLT - INSTALLATION . . . . . . . . . . . . . . . . . . . . 26
FIGURE 6: A3 GALLEY - T52 TIE ROD BOLT - INSTALLATION . . . . . . . . . . . . . . . . . . . . 28
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
3 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
4 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
777
Service Bulletin
ALERT
SummaryNumber: 777-25A0677Original Issue: April 25, 2016
ATA System: 2531
SUBJECT: EQUIPMENT FURNISHINGS - Galley - A2 and A3 Galley Hardware Installation
Inspection
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Accomplishment of this service bulletin will make sure that the A2 and A3 Galleys are attached to the T53 and
T52 tie rods, respectively, in the overhead support structure and thus prevent the galley from coming loose. If
this service bulletin is not done, A2 and A3 galleys not connected to the tie rods may come loose under a 9G
load posing a risk of serious injury to passengers and the impedance of escapement routes.
The hardware that attaches the T53 and T52 tie rods to the tripod mount assembly in the A2 and A3 Galleys
was found unattached during a routine production inspection of line number 1357 and 1358 airplanes before
delivery. The cause was determined to be a change to the galley installation sequence for the airplanes in the
effectivity of this service bulletin to correct a galley door binding issue that was occurring in service. This changed
installation sequence did not have a robust method to make sure that the tie rods were attached to the galley
before delivery. Boeing has implemented a new improved process to make sure that the hardware that attaches
the T53 and T52 tie rods to the tripod mount assembly in the A2 and A3 Galleys is attached. Boeing is not aware
of any in-service damage to galley parts or surrounding parts due to uninstalled tie rod hardware. There are no
known failures in service during normal flight loads. Therefore it is expected that the galley parts and surrounding
parts can withstand normal flight loads if the hardware is missing from the tie rod.
This service bulletin gives instructions to do a one-time inspection of the A2 and A3 Galleys to make sure they
are connected to the T53 and T52 tie rods and thus stay securely in place under a 9G load.
Boeing Service Related Problem (SRP) 777-25-0372 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
5 of 29

### Page 6

ReferenceAffectedPlanning Data
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
NoOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION
Get access to the area above the A2 and A3 Galleys. Do a one-time general visual inspection of the A2 Galley
T53 tie rod assembly and A3 Galley T52 tie rod assembly, to make sure that the hardware that connects to the
tripod mount assembly to the T53 and T52 tie rods is installed. If the hardware is installed no more work is
necessary. Install the hardware if it is not installed.
EFFECTIVITY
777-300ER Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).
COMPLIANCE
Boeing recommends that the inspection and corrective action given in this service bulletin be done within 12
months after the original issue date of this service bulletin.
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for 777 airplanes in warranty as of December 09, 2015. Please refer
to Paragraph 2.B., Industry Support Information. The warranty remedies will expire eight years from the original
issue date of this service bulletin.
Boeing warranty remedies are not available for the inspection given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
6 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT

### Page 7 (OCR)

BOEING SERVICE BULLETIN 777-25A0677
ALERT  ALERT
MATERIAL INFORMATION
None.
INSPECT THE A2 AND A3
GALLEY TRIPOD MOUNT
ASSEMBLY AND T53 AND T52
TIE ROD FOR HARDWARE
INSTALLATION  STA
2108
INBD
LEFT SIDE SHOWN, RIGHT SIDE SIMILAR  2482890
(TYPICAL)
Original Issue: April 25, 2016
Export Controlled ECCN: 9E991 - BOEING  777-25A0677
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  7 of 29

### Page 8

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
8 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
777
Service Bulletin
ALERT
Number: 777-25A0677
Original Issue: April 25, 2016
ATA System: 2531
SUBJECT: EQUIPMENT FURNISHINGS - Galley - A2 and A3 Galley Hardware Installation
Inspection
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D624W001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is applicable to 777-300ER Airplanes listed below, in 1 Group. The Variable
Number and Group Information for the applicable airplanes is given below. Line Number 1377 and
on will have a caution note added to production airplanes.
DESCRIPTIONCONFIGURATIONGROUP
777-300ER Airplanes with A2 and A3 Galley hardware that may not
be installed
-1
Airplane Models:
777-300ER
GroupVariable Number
1WD931 - WD933
1WE057
1WE315 - WE318
1WE341 - WE343
1WE400 - WE401
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
9 of 29

### Page 10

GroupVariable Number
1WE557 - WE565
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
Accomplishment of this service bulletin will make sure that the A2 and A3 Galleys are attached to the
T53 and T52 tie rods, respectively, in the overhead support structure and thus prevent the galley from
coming loose. If this service bulletin is not done, A2 and A3 galleys not connected to the tie rods may
come loose under a 9G load posing a risk of serious injury to passengers and the impedance of
escapement routes.
The hardware that attaches the T53 and T52 tie rods to the tripod mount assembly in the A2 and A3
Galleys was found unattached during a routine production inspection of line number 1357 and 1358
airplanes before delivery. The cause was determined to be a change to the galley installation sequence
for the airplanes in the effectivity of this service bulletin to correct a galley door binding issue that was
occurring in service. This changed installation sequence did not have a robust method to make sure
that the tie rods were attached to the galley before delivery. Boeing has implemented a new improved
process to make sure that the hardware that attaches the T53 and T52 tie rods to the tripod mount
assembly in the A2 and A3 Galleys is attached. Boeing is not aware of any in-service damage to galley
parts or surrounding parts due to uninstalled tie rod hardware. There are no known failures in service
during normal flight loads. Therefore it is expected that the galley parts and surrounding parts can
withstand normal flight loads if the hardware is missing from the tie rod.
This service bulletin gives instructions to do a one-time inspection of the A2 and A3 Galleys to make
sure they are connected to the T53 and T52 tie rods and thus stay securely in place under a 9G load.
Boeing Service Related Problem (SRP) 777-25-0372 is related to this service bulletin.
D. Description
Get access to the area above the A2 and A3 Galleys. Do a one-time general visual inspection of the
A2 Galley T53 tie rod assembly and A3 Galley T52 tie rod assembly, to make sure that the hardware
that connects to the tripod mount assembly to the T53 and T52 tie rods is installed. If the hardware is
installed no more work is necessary. Install the hardware if it is not installed.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
261, 262777-300ER
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
10 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT

### Page 11

E. Compliance
Boeing recommends that the inspection and corrective action(s) given in this service bulletin be done
within 12 months after the original issue date of this service bulletin.
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools
Elapsed HoursTask HoursNumber of PersonsTask
0.300.301Open Access
0.100.101FIGURE 1
0.100.101FIGURE 2
0.300.301Close Access
0.800.80TOTAL FOR EACH AIRPLANE
NOTE: Data not given if fastener needs to be installed.
H. Weight and Balance Changes
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
11 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT

### Page 12

I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Boeing Service Related Problem (SRP) 777-25-0372
b. Service Bulletin Index D624W001
c. Standard Overhaul Practices Manual (SOPM) 20-50-01
d. 777 Aircraft Maintenance Manual (AMM) 25-21-07, 25-31-03
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
25-31777 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
12 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT

### Page 13

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are available for 777 airplanes in warranty as of December 09, 2015. For
inspection labor task hour reimbursement for airplanes in warranty as of that date, send a warranty
claim to Boeing Fleet Support Contracts - Warranty. If the condition described in this service bulletin
is found during the inspection for airplanes in warranty as of that date and additional task hours (and
kits, parts, and/or special tools) are required, send a warranty claim to Boeing Fleet Support Contracts
- Warranty. Please refer to this service bulletin number and reference the airplane variable number in
your purchase order. The warranty remedies will expire eight years from the original issue date of this
service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
None.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
13 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT

### Page 14

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
14 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT
BLANK PAGE

### Page 15

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 777 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 777
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 777
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
5. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate
full threaded fasteners (screws) needed for installation in this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
15 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT

### Page 16

6. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance unless otherwise
specified. A mirror may be necessary to enhance visual access to all exposed surfaces
in the inspection area. This level of inspection is made under normally available
lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may
require removal or opening of access panels or doors. Stands, ladders or platforms
may be required to gain proximity to the area being checked.
7. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
8. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
9. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
10. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
11. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. An Alternative Method of
Compliance (AMOC) is required for any deviations to RC steps, including sub-steps
and identified figures. Steps not labeled as RC may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC. This is provided that the RC steps, including
sub-steps and identified figures, can still be done as specified, and the airplane can
be put back in an airworthy condition.
B. WORK INSTRUCTIONS
1. Get access to the passenger compartment.
2. Remove the Lowered Ceiling Panels to get access to the area above the A2 and A3 Galleys. Refer
to 777 AMM 25-21-07 as an accepted procedure.
3. RC - Do a general visual inspection of the area above the A2 Galley to make sure the hardware
(i.e., pin assembly or bolt assembly) that connects the tripod mount assembly to the T53 tie rod
is installed, in accordance with FIGURE 1.
NOTE: In the factory, either a pin or bolt assembly is connected/hanging by a lanyard from the
tripod mount assembly prior to it being installed in the tripod mount assembly/tie rod joint.
If it was not installed into the joint in the factory, it is still there attached and hanging from
the tripod mount assembly.
a. If the hardware is installed, no more work is necessary.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
16 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT

### Page 17

b. If the hardware is not installed, do one of the steps below:
(1) If it is a pin assembly that is connected/hanging by a lanyard to the tripod mount assembly,
install it in accordance with FIGURE 3.
(2) If it is a bolt assembly (bolt, washer, nut) that is connected/hanging by a lanyard to the
tripod mount assembly, install it in accordance with FIGURE 5.
4. RC - Do a general visual inspection of the area above the A3 Galley to make sure the hardware
(i.e., pin assembly or bolt assembly) that connects the tripod mount assembly to the T52 tie rod
is installed, in accordance with FIGURE 2.
NOTE: In the factory, either a pin or bolt assembly is connected/hanging by a lanyard from the
tripod mount assembly prior to it being installed in the tripod mount assembly/tie rod joint.
If it was not installed into the joint in the factory, it is still there attached and hanging from
the tripod mount assembly.
a. If the hardware is installed, no more work is necessary.
b. If the hardware is not installed, do one of the steps below:
(1) If it is a pin assembly that is connected/hanging by a lanyard to the tripod mount assembly,
install it in accordance with FIGURE 4.
(2) If it is a bolt assembly (bolt, washer, nut) that is connected/hanging by a lanyard to the
tripod mount assembly, install it in accordance with FIGURE 6.
5. Install the Lowered Ceiling Panels. Refer to 777 AMM 25-21-07 as an accepted procedure.
6. Put the airplane back into serviceable condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
17 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT

### Page 18 (OCR)

BOEING SERVICE BULLETIN 777-25A0677
ALERT  ALERT
STA
2108
T53 TIE ROD
TRIPOD
MOUNT
ASSEMBLY
INBD  2482743
FIGURE 1: A2 GALLEY - HARDWARE INSTALLATION - INSPECTION
(SHEET 1 OF 2)
Original Issue: April 25, 2016
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-25A0677
Work - See page 1 for details.  18 of 29

### Page 19

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
MORE DATAQTYIDENTIFICA-
TION
NAMETASKSTEP
(a) (b)1-T53 Tie Rod At-
tachment
Inspect1
(a) This is a typical view. Refer to 777 AMM 25-31-03 for more clarity.
(b) Do a general visual inspection to make sure the hardware (i.e., pin assembly or bolt) that connects the
tripod mount assembly to the T53 tie rod is installed.
FIGURE 1: A2 GALLEY - HARDWARE INSTALLATION - INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
19 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT

### Page 20 (OCR)

BOEING SERVICE BULLETIN 777-25A0677
ALERT  ALERT
STA
2108
T52 TIE ROD
TRIPOD
MOUNT
ASSEMBLY
INBD
2482952
FIGURE 2: A3 GALLEY - HARDWARE INSTALLATION - INSPECTION
(SHEET 1 OF 2)
Original Issue: April 25, 2016
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-25A0677
Work - See page 1 for details.  20 of 29

### Page 21

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
MORE DATAQTYIDENTIFICA-
TION
NAMETASKSTEP
(a) (b)1-T52 Tie Rod At-
tachment
Inspect1
(a) This is a typical view. Refer to 777 AMM 25-31-03 for more clarity.
(b) Do a general visual inspection to make sure the hardware (i.e., pin assembly or bolt) that connects the
tripod mount assembly to the T53 tie rod is installed.
FIGURE 2: A3 GALLEY - HARDWARE INSTALLATION - INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
21 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT

### Page 22 (OCR)

BOEING SERVICE BULLETIN 777-25A0677
ALERT  ALERT
STA
2108
INBD  2483018
FIGURE 3: A2 GALLEY - T53 TIE ROD PIN - INSTALLATION
(SHEET 1 OF 2)
Original Issue: April 25, 2016
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-25A0677
Work - See page 1 for details.  22 of 29

### Page 23

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
MORE DATAQTYIDENTIFICA-
TION
NAMETASKSTEP
(a)1-T53 Tie RodAdjust1
1MS17987-C1019Pin AssemblyInstall2
(a) Adjust the tie rod eye to make sure that it aligns with the tripod mount assembly clevis hole.
FIGURE 3: A2 GALLEY - T53 TIE ROD PIN - INSTALLATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
23 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT

### Page 24 (OCR)

BOEING SERVICE BULLETIN 777-25A0677
ALERT  ALERT
½т08
INBD  2483229
FIGURE 4: A3 GALLEY - T52 TIE ROD PIN - INSTALLATION
(SHEET 1 OF 2)
Original Issue: April 25, 2016
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-25A0677
Work - See page 1 for details.  24 of 29

### Page 25

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
MORE DATAQTYIDENTIFICA-
TION
NAMETASKSTEP
(a)1-T52 Tie RodAdjust1
1MS17987-C1019Pin AssemblyInstall2
(a) Adjust the tie rod eye to make sure that it aligns with the tripod mount assembly clevis hole.
FIGURE 4: A3 GALLEY - T52 TIE ROD PIN - INSTALLATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
25 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT

### Page 26 (OCR)

BOEING SERVICE BULLETIN 777-25A0677
ALERT  ALERT
STA
2108
INBD  2483208
FIGURE 5: A2 GALLEY - T53 TIE ROD BOLT - INSTALLATION
(SHEET 1 OF 2)
Original Issue: April 25, 2016
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-25A0677
Work - See page 1 for details.  26 of 29

### Page 27

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
MORE DATAQTYIDENTIFICA-
TION
NAMETASKSTEP
(a)1-T53 Tie RodAdjust1
(b)1BACB30LE10K22BoltInstall2
1NAS1149F1032PWashers
1MS21083N10Nut
(a) Adjust the tie rod eye to make sure that it aligns with the tripod mount assembly clevis hole.
(b) Torque bolt to 110-130 inch pounds.
FIGURE 5: A2 GALLEY - T53 TIE ROD BOLT - INSTALLATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
27 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT

### Page 28 (OCR)

BOEING SERVICE BULLETIN 777-25A0677
ALERT  ALERT
INBD
2483235
FIGURE 6: A3 GALLEY - T52 TIE ROD BOLT - INSTALLATION
(SHEET 1 OF 2)
Original Issue: April 25, 2016
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-25A0677
Work - See page 1 for details.  28 of 29

### Page 29

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
MORE DATAQTYIDENTIFICA-
TION
NAMETASKSTEP
(a)1-T52 Tie RodAdjust1
(b)1BACB30LE10K22BoltInstall2
1NAS1149F1032PWashers
1MS21083N10Nut
(a) Adjust the tie rod eye to make sure that it aligns with the tripod mount assembly clevis hole.
(b) Torque bolt to 110-130 inch pounds.
FIGURE 6: A3 GALLEY - T52 TIE ROD BOLT - INSTALLATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: April 25, 2016
777-25A0677
29 of 29
BOEING SERVICE BULLETIN 777-25A0677
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
