# Boeing Alert Service Bulletin 777-27A0059: The Boeing Group - Service Bulletin No. 777-27A0059

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2008-0933; AD 2009-14-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 777-27A0059](https://openairdocs.org/service-documents/boeing/777-27a0059.md)
- Title as filed: The Boeing Group - Service Bulletin No. 777-27A0059
- Pages: 37
- PDF: https://openairdocs.org/files/sha256/42/1c/421c6d7491e6f2a205f0c3c05338b0d3c9b8e3b8d1bb4b27df4dfa00c074139f
- Page: https://openairdocs.org/service-documents/boeing/777-27a0059/file/421c6d7491e6

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial        
Airplane
Group 
 777
Service Bulletin
Number: 777-27A0059
Date: September 18, 2003
Revision 2: January 15, 2009
ATA System: 2741
SUBJECT: FLIGHT CONTROLS - Horizontal Stabilizer,Trim Actuator, Ballscrew Maintenance and
Lubrication Interval Change, and Freeplay Inspection Addition
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2003 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P .O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the Boeing livery are all
trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document
unless provided in writing by Boeing.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
1 of 37
6.0

### Page 2

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
2 of 37
BOEING SERVICE BULLETIN 777-27A0059
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ..................................................... 7
1. PLANNING INFORMATION ........................................ 1 1
A. Effectivity ............................................... 1 1
1. Airplanes ............................................ 1 1
2. Spares Affected ........................................ 1 4
B. Concurrent Requirements ...................................... 1 4
C. Reason ................................................ 1 4
D. Description .............................................. 1 5
E. Compliance .............................................. 1 6
F . Approval ............................................... 1 7
G. Manpower .............................................. 1 8
H. Weight and Balance Changes .................................... 1 8
I. Electrical Load Data ......................................... 1 8
J. References .............................................. 1 9
1. Existing Data: .......................................... 1 9
2. Data supplied with this Service Bulletin: ........................... 1 9
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 1 9
K. Publications Affected ......................................... 1 9
L. Interchangeability and Intermixability of Parts ........................... 1 9
2. MATERIAL INFORMATION ........................................ 2 1
A. Material - Price and Availability ................................... 2 1
B. Industry Support Information .................................... 2 1
C. Parts Necessary For Each Airplane ................................. 2 1
1. Kits/Parts: ............................................ 2 1
2. Parts and Materials Supplied by the Operator: ........................ 2 1
3. Parts Modified and Reidentified: ................................ 2 1
4. Parts Removed and Not Replaced: .............................. 2 1
D. Parts Necessary to Change Spares ................................. 2 1
E. Special Tooling - Price and Availability ............................... 2 1
F . Special Tooling Necessary to do this Service Bulletin ....................... 2 2
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 3
A. GENERAL INFORMATION ..................................... 2 3
B. WORK INSTRUCTIONS ....................................... 2 4
FIGURE 1: (THIS FIGURE IS DELETED) ................................. 2 6
FIGURE 2: HORIZONTAL STABILIZER TRIM ACTUATOR - BALLSCREW AND BALLNUT DETAILED
INSPECTION .......................................... 2 7
Appendix A: HORIZONTAL STABILIZER TRIM ACTUATOR - BALLSCREW-TO-BALLNUT FREEPLAY
INSPECTION .......................................... 2 9
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
3 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 4

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
4 of 37
BOEING SERVICE BULLETIN 777-27A0059
BLANK PAGE

### Page 5

Commercial        
Airplane
Group 
 777
Service Bulletin
Revision Transmittal SheetNumber: 777-27A0059Date: September 18, 2003
Revision 2: January 15, 2009
ATA System: 2741
SUBJECT: FLIGHT CONTROLS - Horizontal Stabilizer,Trim Actuator, Ballscrew Maintenance and
Lubrication Interval Change, and Freeplay Inspection Addition
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Federal Aviation Administration (FAA) Airworthiness Directive FAA AD 2007-17-12 is related to this service
bulletin.
No more work is necessary on airplanes inspected or lubricated as shown in the Revision 1 of this service
bulletin. Continue to accomplish the lubrication and the inspections in accordance with the intervals given in
Paragraph 1.E., Compliance.
REASON FOR REVISION
This revision is sent to specify the horizontal stabilizer freeplay test equipment, J55002-37, as the correct tool
to accomplish the Ballscrew-to-Ballnut Freeplay Inspection. Although the inspection can be accomplished
correctly as specified in Revision 1, it is possible that too much force will be applied to the structure. The
J55002-37 equipment has a force scale to monitor the force applied to the horizontal stabilizer during the
inspection. Also, a better description is needed to better explain the extent of action necessary to restore a
removed unit.
These sections were changed:
1. Paragraph 1.D., Description: The request to send data to Boeing is deleted. The affected maintenance
zones are added.
2. Paragraph 1.E., Compliance: A reference to FAA AD 2007-17-12 is added. The recommended intervals
are deleted, leaving only the maximum intervals. A note is added to explain that when you replace a horizontal
stabilizer actuator with a unit that is in a known serviceable condition, this action meets the intent of one
detailed inspection, one freeplay inspection,and one lubrication of the stabilizer ballscrew. Notes are added
to help identify the 777 MPD task that is satisfied by the accomplishment of each task in this service bulletin.
The table is simplified to eliminate redundant logic.
3. Paragraph 1.F ., Approval: A paragraph is added to explain that this service bulletin is an Alternative Method
of Compliance (AMOC) to FAA AD 2007-17-12.
4. Paragraph 2.E., Special Tooling - Price and Availability: The tool kit number is changed. Also, the rental
and purchase data is updated. The data about alternative tools are removed.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
5 of 37

### Page 6

5. Paragraph 1.K., Publications Affected:The 777 Maintenance Manual and 777 Maintendance Planning Data
are given as affected publications.
6. Paragraph 2.A., Material - Price and Availability: An unnecessary reference to paragraph 2.C. was was
removed.
7. Paragraph 2.C.2., Parts and Materials Supplied by the Operator: An unnecessary reference to paragraph
2.F . was removed.
8. Paragraph 2.E., Special Tooling - Price and Availability: The tool kit number and the rental data is changed.
9. Paragraph 2.F ., Special Tooling Necessary to do this Service Bulletin: The tool kit number and the price
data is changed.
10. Paragraph 3.A., General Information: A note is added that explains how to identify replacement horizontal
stabilizer trim actuators that are in a known serviceable condition.
11. Paragraph 3.B., Work Instructions: In parts 1 and 2, the step that gives requirements for inspections if you
replace a worn or damaged actuator is changed to require the inspections only if you install a unit that is
not in a known serviceable condition.
12. Paragraph 3.B., Work Instructions: The lubrication step is clarified to make sure that the ballnut is given as
an item to lubricate. A step is added in Part 3, similar to Parts 1 and 2. This step requires that the detailed
inspection and freeplay inspection be accomplished if you remove a worn or damaged actuator and install
a unit that is not in a known serviceable condition.
13. FIGURE 2: Step 2 is deleted. This step was redundant to the AMM procedure referenced in step 1 and to
note (a). Note (a), the instruction to remove and replace the unit is replaced with a statement that the
condition must be corrected.
14. APPENDIX A:The instructions to accomplish the Ballscrew-to-Ballnut Freeplay Inspection for the Horizontal
Stabilizer Trim Actuator are changed to require the tool kit J55002-37. The torque specification is removed.
A force specification is added. The illustrations are changed to show the tool J55002-37. An unnecessary
note is deleted. The step to overhaul a horizontal stabilizer trim actuator assembly that is removed because
it is found to be worn is deleted.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
September 18, 2003Original Issue:
August 18, 2005Revision 1:
January 15, 2009Revision 2:
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
6 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 7

Commercial        
Airplane
Group 
 777
Service Bulletin
SummaryNumber: 777-27A0059Date: September 18, 2003
Revision 2: January 15, 2009
ATA System: 2741
SUBJECT: FLIGHT CONTROLS - Horizontal Stabilizer,Trim Actuator, Ballscrew Maintenance and
Lubrication Interval Change, and Freeplay Inspection Addition
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Accomplishment of this service bulletin will help to decrease the probability that the horizontal stabilizer actuator
will become worn prematurely. This actuator controls the position of the horizontal stabilizer. It is possible that
the flight crew cannot safely control the airplane if the actuator ballnut and ballscrew become worn sufficiently
to disengage (although this is very unlikely to occur).
An investigation found that an MD-80 accident was caused by a prematurely worn horizontal stabilizer actuator.
Also, one 757 airplane was found to have an actuator with severe corrosion. The 777 has no reports of similar
conditions. Because the 777 actuator has similar configuration to the 757 actuator, Boeing did a safety analysis
of the 777 actuator. This analysis found no safety problems with the configuration of the 777 actuator. But the
analysis did show that changes to the maintenance procedures and interval can make the actuator more reliable.
This service bulletin gives three scheduled maintenance procedures necessary to keep the 777 actuator in a
serviceable condition. Each of the three procedures can be done independently. No airplane configuration
changes are necessary.
Boeing Service Related Problem (SRP) 777-SRP-27-0153 is related to this service bulletin.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
7 of 37

### Page 8

ACTION
1. DETAILED INSPECTION: Do a detailed inspection for metal particles or corrosion products in the grease
on the actuator ballnut and ballscrew. Clean the actuator ballscrew. Inspect the actuator ballnut for damage,
cracks, corrosion, and obvious wear. Inspect the ballscrew for thread distortion, metal flaking, cross-threading,
and stripping. Inspect the ballscrew for corrosion. If corrosion is found, evaluate the extent of the corrosion.
Inspect for lifted or damaged ballnut return tubes. Inspect the external areas of the actuator, and the areas
below the actuator for loose ball bearings. Move the horizontal stabilizer to a different setting. Repeat the
inspections for the newly exposed area of the ballscrew. Replace the actuator before further flight if one or
more of these conditions are found. Lubricate the actuator ballnut and ballscrew. Repeat the Detailed
Inspection at the interval given in Paragraph 1.E., Compliance.
2. BALLSCREW-TO-BALLNUT FREEPLAY INSPECTION: Measure the freeplay between the actuator ballnut
and ballscrew. Replace the actuator if the freeplay is found to be more than the specified limit. Lubricate
the actuator ballnut and ballscrew. Repeat the stabilizer ballscrew-to-ballnut freeplay inspection at the
interval given in Paragraph 1.E., Compliance.
3. BALLNUT AND BALLSCREW LUBRICATION: Lubricate the actuator ballnut and ballscrew. Repeat the
lubrication at the interval given in Paragraph 1.E., Compliance.
NOTE: If you replace the actuator with unit that is not in a known serviceable condition, then you must do the
Detailed Inspection and the Ballscrew-to-Ballnut Freeplay Inspection of the replacement unit as given
in this service bulletin before further flight. Refer to Paragraph 3.A., General Information for the
applicable known serviceable conditions.
EFFECTIVITY
All 777 airplanes.
COMPLIANCE
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes, inspection, and/or repair procedures
given in this service bulletin.
MANPOWER
Elapsed HoursTotal Task Hours
5.07.5
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
8 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 9 (OCR)

BOEING SERVICE BULLETIN 777-27A0059
• SEE A
1. CHANGE STABILIZER BALLSCREW
LUBRICATION INTERVAL
2. ADD STABILIZER BALLSCREW
FREEPLAY INSPECTION
3. ADD DETAILED INSPECTION AT
MORE FREQUENT INTERVALS
SERVICE ACCESS
DOOR, 311BL
FWD <  W01314
September 18, 2003
Revision 2: January 15, 2009  777-27A0059
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  9 of 37

### Page 10

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
10 of 37
BOEING SERVICE BULLETIN 777-27A0059
BLANK PAGE

### Page 11

Commercial        
Airplane
Group 
 777
Service Bulletin
Number: 777-27A0059
Date: September 18, 2003
Revision 2: January 15, 2009
ATA System: 2741
SUBJECT: FLIGHT CONTROLS - Horizontal Stabilizer,Trim Actuator, Ballscrew Maintenance and
Lubrication Interval Change, and Freeplay Inspection Addition
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is for the airplanes shown below.
Refer to Service Bulletin Index Document D624W001 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
NOTE: This Service Bulletin is for the airplanes identified below. The Effectivity list shown below
is complete for airplanes through line number 790. Airplanes after line number 790 are
also affected by this service bulletin, and are in Group(s): 1
DESCRIPTIONCONFIGURATIONGROUP
Group 1 applies to all 777 airplanes-1
Airplane Models:
777-200, 777-200LR, 777-300, 777-300ER
GroupVariable Number
1WA001 - WA017
1WA076 - WA080
1WA086 - WA093
1WA101 - WA104
1WA116 - WA119
1WA131 - WA137
1WA171 - WA175
1WA196 - WA198
1WA206 - WA212
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
11 of 37

### Page 12

GroupVariable Number
1WA221 - WA223
1WA231 - WA232
1WA241 - WA250
1WA261 - WA266
1WA281 - WA283
1WA301 - WA304
1WB001 - WB021
1WB031 - WB046
1WB051 - WB088
1WB101 - WB106
1WB121 - WB125
1WB131 - WB148
1WB151 - WB155
1WB161 - WB177
1WB181 - WB194
1WB201 - WB215
1WB231 - WB247
1WB271 - WB273
1WB276 - WB286
1WB291 - WB302
1WB306 - WB307
1WB311 - WB337
1WB341 - WB342
1WB366 - WB368
1WB371 - WB388
1WB406
1WB411 - WB413
1WB416 - WB439
1WB446 - WB453
1WB476
1WB481 - WB484
1WB501 - WB512
1WB531 - WB537
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
12 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 13

GroupVariable Number
1WB551 - WB554
1WB591 - WB597
1WB601 - WB606
1WB611 - WB622
1WB631 - WB638
1WB646 - WB649
1WC051 - WC073
1WC101 - WC104
1WC111 - WC120
1WC221 - WC222
1WC241 - WC243
1WC281 - WC290
1WC301 - WC308
1WC361 - WC364
1WC371 - WC374
1WC381 - WC395
1WC441
1WC446 - WC449
1WC456 - WC459
1WC486 - WC493
1WC506 - WC508
1WC521 - WC522
1WC531 - WC536
1WC546 - WC548
1WC556
1WC566 - WC567
1WC571 - WC572
1WD001 - WD002
1WD011 - WD015
1WD031 - WD036
1WD046 - WD055
1WD066 - WD073
1WD081 - WD082
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
13 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 14

GroupVariable Number
1WD501 - WD510
1WD521 - WD541
1WD546 - WD552
1WD561 - WD573
1WD581 - WD599
1WD606 - WD609
1WD621 - WD632
1WD651 - WD662
1WD671 - WD675
1WD691 - WD709
1WD741 - WD751
1WD761 - WD770
1WD786 - WD788
1WD796 - WD806
1WD826 - WD830
1WD846 - WD853
1WD871 - WD876
1WD911 - WD913
1WD936 - WD939
1WD946
1WD966 - WD968
1WD981 - WD982
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
Accomplishment of this service bulletin will help to decrease the probability that the horizontal stabilizer
actuator will become worn prematurely. This actuator controls the position of the horizontal stabilizer.
It is possible that the flight crew cannot safely control the airplane if the actuator ballnut and ballscrew
become worn sufficiently to disengage (although this is very unlikely to occur).
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
14 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 15

An investigation found that an MD-80 accident was caused by a prematurely worn horizontal stabilizer
actuator. Also, one 757 airplane was found to have an actuator with severe corrosion. The 777 has no
reports of similar conditions. Because the 777 actuator has similar configuration to the 757 actuator,
Boeing did a safety analysis of the 777 actuator. This analysis found no safety problems with the
configuration of the 777 actuator. But the analysis did show that changes to the maintenance procedures
and interval can make the actuator more reliable.
This service bulletin gives three scheduled maintenance procedures necessary to keep the 777 actuator
in a serviceable condition. Each of the three procedures can be done independently. No airplane
configuration changes are necessary.
Boeing Service Related Problem (SRP) 777-SRP-27-0153 was initiated after an in-service report of
corrosion in the ballnut of the 757 horizontal stabilizer in the ballscrew assembly. The 777 stabilizer
ballscrew design is similar to 757. During the SRP analysis, the lack of maintenance procedure to
check the stabilizer ballscrew primary load path was identified.
Revision 1 is sent for the following reasons:
— The data given in Information Notice 777-27A0059 IN 01 is included in this revision.
— A better description of the compliance time is given.
— It is necessary to do the Detailed Inspection and the Ballscrew-to-Ballnut Freeplay Inspection for
replacement actuators that are not new or not overhauled.
— The Detailed Inspection procedure is given in the Aircraft Maintenance Manual.
Revision 2 is sent to specify the horizontal stabilizer freeplay test equipment, J55002-37, as the correct
tool to accomplish the Ballscrew-to-Ballnut Freeplay Inspection. Although the inspection can be
accomplished correctly as specified in Revision 1, it is possible that too much force will be applied to
the structure.The J55002-37 equipment has a force scale to monitor the force applied to the horizontal
stabilizer during the inspection. Also, a better description is needed to better explain the extent of action
necessary to restore a removed unit.
D. Description
1. DETAILED INSPECTION: Do a detailed inspection for metal particles or corrosion products in the
grease on the actuator ballnut and ballscrew. Clean the actuator ballscrew. Inspect the actuator
ballnut for damage, cracks, corrosion, and obvious wear. Inspect the ballscrew for thread distortion,
metal flaking, cross-threading, and stripping. Inspect the ballscrew for corrosion. If corrosion is
found, evaluate the extent of the corrosion. Inspect for lifted or damaged ballnut return tubes.
Inspect the external areas of the actuator, and the areas below the actuator for loose ball bearings.
Move the horizontal stabilizer to a different setting. Repeat the inspections for the newly exposed
area of the ballscrew. Replace the actuator before further flight if one or more of these conditions
are found. Lubricate the actuator ballnut and ballscrew. Repeat the Detailed Inspection at the
interval given in Paragraph 1.E., Compliance.
2. BALLSCREW-TO-BALLNUT FREEPLAY INSPECTION: Measure the freeplay between the actuator
ballnut and ballscrew. Replace the actuator if the freeplay is found to be more than the specified
limit. Lubricate the actuator ballnut and ballscrew. Repeat the stabilizer ballscrew-to-ballnut freeplay
inspection at the interval given in Paragraph 1.E., Compliance.
3. BALLNUT AND BALLSCREW LUBRICATION: Lubricate the actuator ballnut and ballscrew. Repeat
the lubrication at the interval given in Paragraph 1.E., Compliance.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
15 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 16

NOTE: If you replace the actuator with a unit that is not in a known serviceable condition, then you
must do the Detailed Inspection and the Ballscrew-to-Ballnut Freeplay Inspection of the
replacement unit as given in this service bulletin before further flight. Refer to Paragraph 3.A.,
General Information for the applicable known serviceable conditions.
Revision 1- More work is necessary on airplanes that were repaired with a replacement Horizontal
Stabilizer Trim Actuator that was not new or not overhauled, as shown in the initial release of this
service bulletin. If you replaced the Horizontal Stabilizer Trim Actuator with a unit that was not new or
not overhauled, and you did not subsequently do the Detailed Inspection and the Ballscrew-to-Ballnut
Freeplay Inspection, then you must do these inspections as given in Paragraph 3.B, Work Instructions,
Part 1 and Part 2, within 3500 flight-hours or 24 months from the Revision 1 date on this Service Bulletin,
whichever occurs first.
Revision 2- No more work is necessary on airplanes inspected or lubricated as shown in the Revision
1 of this service bulletin. Continue to accomplish the lubrication and the inspections in accordance with
the intervals given in Paragraph 1.E., Compliance.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
311, 312777-200, 777-200LR, 777-300,
777-300ER
E. Compliance
Federal Aviation Administration (FAA) Airworthiness Directive, FAA AD 2007-17-12, is related to this
service bulletin.
Boeing recommends that operators accomplish the Detailed Inspection, Lubrication, and the Freeplay
Inspection at the times specified in Table 1 below.
NOTE: The Compliance Time gives the maximum time after which you must schedule the task
by its given Repeat Interval. If your existing scheduled maintenance interval for the task
occurs first, do the task at the existing scheduled maintenance time. The Compliance
Time does not permit you to increase your existing maintenance interval for the task.
—
— For the initial accomplishment of this service bulletin, it is convenient to do the Detailed
Inspection first. Do the Ballscrew-to-Ballnut Freeplay Inspection procedure immediately
afterwards.
— The Ballscrew-to-Ballnut Freeplay Inspection, and the Detailed Inspection each include
the Ballnut and Ballscrew Lubrication.
— When you replace a horizontal stabilizer trim actuator with a unit that is in a known
serviceable condition, this action meets the intent of one detailed inspection, one freeplay
inspection, and one lubrication of the stabilizer ballscrew. Refer to Paragraph 3.A., General
Information for the descriptions of units that are in a known serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
16 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 17

TABLE 1 - HORIZONTAL STABILIZER TRIM ACTUATOR BALLSCREW AND BALLNUT - INSPECTION
AND LUBRICATION
NotesRepeat Interval
(not to exceed)
Initial Threshold (whichever
occurs later)
Type of
Inspection or
Required Action
Airplane
Condition
(a) (b)3,500 flight-hours
or 12 months,
whichever occurs
first
18 months after
the original issue
date on this
service bulletin
15,000 total
flight-hours
Detailed
Inspection (As
given in
Paragraph 3.B.,
Work
Instructions, Part
1)
All airplanes
(a) (c)2,000 flight-hours
or 12 months,
whichever occurs
first
18 months after
the original issue
date on this
service bulletin
15,000 total
flight-hours
Lubricate (As
given in
Paragraph 3.B.,
Work
Instructions, Part
3)
(a) (d)18,000
flight-hours or 60
months,
whichever occurs
first
18 months after
the original issue
date on this
service bulletin
15,000 total
flight-hours
Freeplay
Inspection (As
given in
Paragraph 3.B.,
Work
Instructions, Part
2)
(a) If repairs are necessary as specified in the listed accomplishment instruction, then the repairs must be
accomplished before further flight
(b) This task accomplishes a detailed inspection of the ballscrew, ballnut, and ballnut return tubes of the
horizontal stabilizer trim actuator. This partially satisfies the intent of the task given for 777 MPD Item
27-450-00, which also accomplishes a detailed inspection of the upper and lower gimbals.Y ou must
accomplish a detailed inspection of the ballscrew, ballnut, and ballnut return tubes as given in this service
bulletin to establish and remain in compliance with this service bulletin.
(c) Accomplishment of this task satisfies the intent of the task given for 777 MPD Item 12-006-00. However,
you must accomplish this task as given in this service bulletin to establish and remain in compliance with
this service bulletin.
(d) Accomplishment of this task satisfies the intent of the task given for 777 MPD Item 27-440-00. However,
you must accomplish this task as given in this service bulletin to establish and remain in compliance with
this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA).The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
17 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 18

If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
This service bulletin has been approved by the FAA. In addition, the Manager of the Seattle Aircraft
Certification Office approves accomplishing detailed inspections, freeplay measurements (inspections),
lubrication, and corrective action if necessary in accordance with this service bulletin, as an AMOC to
accomplishing the corresponding detailed inspections, freeplay measurements (inspections), lubrication,
and corrective action if necessary in accordance with Boeing Alert Service Bulletin 777-27A0059,
Revision 1, dated August 18, 2005, required by paragraphs (h), (i), and (j), of AD 2007-17-12. All
provisions of AD 2007-17-12 that are not specifically referenced in the preceding sentence remain fully
applicable and must be complied with.
G. Manpower
The table below shows an estimate of the task-hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task-hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
— Time to adjust to the workplace
— Time to schedule the work
— Time to examine the work
— Time to cure the materials
— Time to make the parts
— Time to find the tools.
Elapsed HoursTask-HoursNumber of
Persons
Task
0.50.51Open Access
0.50.51Figure 2
2.55.02Appendix A
1.01.01Lubricate
0.50.51Close Access
5.07.5TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
18 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 19

J. References
1. Existing Data:
a. Boeing Service Related Problem (SRP) 777-SRP-27-0153
b. Component Maintenance Manual (CMM) 27-41-03
c. Linear Motion CMM 27-41-15
d. Ratier Figeac CMM 27-44-02
e. Federal Aviation Administration (FAA) Airworthiness Directive 2007-17-12
f. 777 Aircraft Maintenance Manual (AMM) 12-21-05, 27-41-13, 29-11-00
g. 777 Maintenance Planning Data (MPD)
2. Data supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
K. Publications Affected
Chapter-SectionPublication
FRONT MATTER, 12-21, 27-41777 Maintenance Manual
SECTION 1, SECTION 4, APPENDIX B,
APPENDIX C, APPENDIX D
777 Maintenance Planning Data (MPD) document
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
19 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 20

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
20 of 37
BOEING SERVICE BULLETIN 777-27A0059
BLANK PAGE

### Page 21

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts:
None.
2. Parts and Materials Supplied by the Operator:
None.
3. Parts Modified and Reidentified:
None.
4. Parts Removed and Not Replaced:
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
Boeing can supply the tools shown in Paragraph 2.F ., Special Tooling Necessary to do this Service
Bulletin. Send a Purchase Order to the Director of Spares. Give this service bulletin number and the
date the tools will be used.
RENTAL DATA:
Daily Price thru
December 31,
2008
NameTool Kit Number
$160.00Test Equipment -Horizontal
Stabilizer Freeplay
J55002-37
NOTE: A $150.00 handling fee is added to all tool rentals
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
21 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 22

PURCHASE DATA:
Unit Price thru
December 31,
2008
NameTool Kit Number
$6,340.00Test Equipment -Horizontal
Stabilizer Freeplay
J55002-37
The kits are subject to the terms and conditions of the Boeing standard purchase order
acknowledgement. After the Price date, new price data is applicable. Prices are in United States dollars.
Terms: Net 30 days.
REFERENCE THIS SERVICE BULLETIN NUMBER AND SUBMIT PURCHASE ORDER BY ONE
OF THE METHODS THAT FOLLOW:
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
3. Spares Customer Support - MC 36-65 Boeing Spares Department P .O. Box 3707 Seattle,
Washington 98124-2207 USA (Service Bulletin 777-27A0059)
F. Special Tooling Necessary to do this Service Bulletin
To get the tools shown below, refer to Paragraph 2.E., Special Tooling - Price and Availability.
Maintenance and overhaul tools in the manuals shown in Paragraph 1.J., References, can also be
necessary. Examine operator tool supply to make sure all necessary tools are available.
NameTool Kit Number
Test Equipment -Horizontal
Stabilizer Freeplay
J55002-37
Operator Supplied Tools from operators inventory.
NotesName
Or operator's equivalent Dial
Indicator Tool
Dial Indicator with Magnetic
V-Base, Rods, and Clamps
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
22 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 23

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
4. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance unless otherwise
specified. A mirror may be necessary to ensure visual access to all surfaces in the
inspection area. This level of inspection is made under normal available lighting
conditions such as daylight, hangar lighting, flashlight or drop-light and may require
removal or opening of access panels or doors. Stands, ladders or platforms may be
required to gain proximity to the area being checked.
5. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
6. A replacement Horizontal Stabilizer Trim Actuator is in a known serviceable condition
if your records agree with one these conditions:
– The unit is new
– The unit is overhauled in accordance with the applicable Linear Motion CMM
27-41-15, or Ratier Figeac CMM 27-44-02; and Boeing CMM 27-41-03
– The ballscrew assembly on the unit is new, or overhauled in accordance with
the applicable Linear Motion CMM 27-41-15, or Ratier Figeac CMM 27-44-02;
and the unit is found satisfactory in accordance with the tests given in Boeing
CMM 27-41-03
– The condition of unit is found satisfactory in accordance with the tests and checks
given in the applicable Linear Motion CMM 27-41-15, or Ratier Figeac CMM
27-44-02; and the tests given in Boeing CMM 27-41-03
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
23 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 24

B. WORK INSTRUCTIONS
PART 1 - HORIZONTAL STABILIZER TRIM ACTUATOR BALLNUT AND BALLSCREW DETAILED
INSPECTION:
1. Refer to Section 1.E., Compliance for the interval at which the Stabilizer Ballscrew Detailed
Inspection needs to be accomplished and repeated.
a. Do the Detailed Inspection of the Ballnut and Ballscrew as shown in FIGURE 2.
b. If you remove a worn or damaged actuator and install a unit that is not in a known serviceable
condition, then you must do these inspections before a subsequent flight:
NOTE: Refer to Paragraph 3.A., General Information, for the applicable known serviceable
conditions.
(1) The Detailed Inspection as shown in FIGURE 2
(2) Ballscrew-to-Ballnut Freeplay Inspection as shown in APPENDIX A
2. Put the airplane back to a serviceable condition.
PART 2 - HORIZONTAL STABILIZER TRIM ACTUATOR BALLSCREW-TO-BALLNUT FREEPLAY
INSPECTION:
1. Refer to Paragraph 1.E., Compliance for the interval at which the stabilizer ballscrew-to-ballnut
freeplay inspection needs to be accomplished and repeated.
NOTE: This service bulletin adds the ballscrew-to-ballnut freeplay inspection with the
recommended interval of 18,000 flight-hours not to exceed 60 months.
a. Do the Horizontal Stabilizer Trim Actuator - Ballscrew-to-Ballnut Freeplay Inspection as shown
in APPENDIX A.
b. If you remove a worn or damaged actuator and install a unit that is not in a known serviceable
condition, then you must do these inspections before a subsequent flight:
NOTE: Refer to Paragraph 3.A., General Information, for the applicable known serviceable
conditions.
(1) The Detailed Inspection as shown in FIGURE 2
(2) Ballscrew-to-Ballnut Freeplay Inspection as shown in APPENDIX A
2. Put the airplane back to a serviceable condition.
PART 3 - HORIZONTAL STABILIZER TRIM ACTUATOR BALLSCREW AND BALLNUT
LUBRICATION:
1. Refer to Paragraph 1.E., Compliance for the interval at which the stabilizer ballscrew and ballnut
lubrication needs to be accomplished and repeated.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
24 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 25

NOTE: This service bulletin provides an interim notification to change the present Maintenance
Planning Document (MPD) lubrication interval for the Horizontal Stabilizer Ballscrew from
3,000 flight-hours to 2,000 flight-hours.
a. Lubricate the horizontal stabilizer ballscrew and ballnut as shown in 777 AMM 12-21-05.
b. If you remove a worn or damaged actuator and install a unit that is not in a known serviceable
condition, then you must do these inspections before a subsequent flight:
NOTE: Refer to Paragraph 3.A., General Information, for the applicable known serviceable
conditions.
(1) The Detailed Inspection as shown in FIGURE 2
(2) Ballscrew-to-Ballnut Freeplay Inspection as shown in APPENDIX A
2. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2: January 15, 2009
25 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 26 (OCR)

BOEING SERVICE BULLETIN 777-27A0059
THIS FIGURE IS DELETED.
1480100
IGURE 1: THIS FIGURE IS DELETEL
SHEET 1 OF *
Revision 2 January 15  ›. 200  777-27A0059
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  26 of 37

### Page 27 (OCR)

BOEING SERVICE BULLETIN 777-27A0059
• SEE A
SERVICE ACCESS
DOOR, 311BL
A  J58794
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
FIGURE 2: HORIZONTAL STABILIZER TRIM ACTUATOR - BALLSCREW AND BALLNUT DETAILED
INSPECTION
(SHEET 1 OF 2)
September 18, 2003
Revision 2 January 15, 2009  777-27 A0059
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  27 of 37

### Page 28

MORE
DATA
REFERENCESPROCEDURENAMETASKSTEP
(a)(b)(c)777 AMM 27-41-13/601Detailed InspectionHorizontal Stabilizer
Trim Actuator
Ballscrew and Ballnut
Inspect1
(a) This step must include a Detailed Inspection for each of these conditions:
1. corrosion particles or metal particles in the grease or the ballscrew or ballnut
2. damage or cracking of the ballnut
3. corrosion on the ballnut
4. obvious signs of wear on the ballnut
5. obvious differences in thread shape on the ballscrew
6. metal flaking on the ballscrew
7. cross threading, distortion, or stripping of the ballscrew threads
8. corrosion on the ballscrew
9. damage or cracking of the ballscrew
10. lifted or damaged ballnut return tubes
11. ball bearings that have escaped from the ballnut
If the Detailed Inspection finds one or more of these conditions, then the condition must be corrected.
(b) A ballscrew and ballnut lubrication is included as a part of step 1.
(c) If it is necessary to replace the actuator, refer to 777 AMM 27-41-13/401 for the procedure.
FIGURE 2: HORIZONTAL STABILIZER TRIM ACTUATOR - BALLSCREW AND BALLNUT DETAILED
INSPECTION
(SHEET 2 OF 2)
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2 January 15, 2009
28 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 29

1. Horizontal Stabilizer Trim Actuator - Ballscrew-to-Ballnut Freeplay Inspection
a. General
(1) Use this test to inspect the freeplay between the ballscrew and the ballnut of the horizontal stabilizer
trim actuator assembly.
b. References
777 AMM 12-21-05/301, Horizontal Stabilizer Ballscrew, Ballnut, and Gimbal - Servicing
777 AMM 27-41-13/401, Stabilizer Trim Actuator - Removal/Installation
777 AMM 29-11-00/201, Main Hydraulic System - Maintenance Practices
c. Tools/Equipment
J55002-37, Test Equipment - Horizontal Stabilizer Freeplay
Dial Indicator (commercially available)
d. Location Zones
311, Area Aft of Bulkhead, Left
312, Area Aft of Bulkhead, Right
e. Access Panels
311BL, Service Access Door
f. Prepare for the Procedure
(1) Lubricate the Horizontal Stabilizer Ballscrew Actuator Assembly. Refer to 777 AMM 12-21-05/301.
(2) Pressurize the main hydraulic system. Refer to 777 AMM 29-11-00/201.
(3) Use the STAB TRIM levers or switches to move the stabilizer to 6 units of trim on the stab trim
position indicator.
(4) Remove power from the main hydraulic system. Refer to 777 AMM 29-11-00/201.
(5) On the control stand, set the C STAB cutout switch and the RSTAB cutout switch to the CUTOUT
position.
(a) Attach DO-NOT -OPERATE tags to the switches.
(6) Open these circuit breakers and attach DO-NOT -CLOSE tags:
(a) On the E5-1 rack:
Appendix A: HORIZONTAL STABILIZER TRIM ACTUATOR - BALLSCREW-TO-BALLNUT FREEPLAY
INSPECTION
(SHEET 1 OF 9)
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2 January 15, 2009
29 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 30

1) CBB2, STAB TRIM CNTL - R
(b) On the E2-6 rack:
1) CBB2, STAB TRIM CNTL - C
(7) Get access to the stabilizer trim actuator through access panel 311BL.
(8) Do these steps to install the horizontal stabilizer freeplay test equipment between the horizontal
stabilizer and the lower fuselage (see Illustration 1):
(a) Measure the distance between the attachment points for the horizontal stabilizer freeplay test
equipment.
(b) Use the distance you measured to set the horizontal stabilizer freeplay test equipment to the
correct of the three positions shown in Illustration 1b.
(c) Connect one end of the horizontal stabilizer freeplay test equipment to the airplane.
(d) Turn the horizontal stabilizer freeplay test equipment to adjust it, until the other end can be
attached.
NOTE: Adjust it so that approximately the same number of threads show at both ends of
the horizontal stabilizer freeplay test equipment.
(9) Do these steps to install a dial indicator between the stabilizer ballscrew and the ballnut (see
Illustration 2).
(a) Attach a magnetic base (commercially available) to the stabilizer ballscrew below the ballnut.
(b) Install the dial indicator on the support arm of the magnetic base so that the end of the dial
indicator touches a flat spot on the ballnut.
NOTE: The dial indicator must be installed so that it can measure the downward movement
of the ballnut relative to the ballscrew.
Appendix A: HORIZONTAL STABILIZER TRIM ACTUATOR - BALLSCREW-TO-BALLNUT FREEPLAY
INSPECTION
(SHEET 2 OF 9)
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2 January 15, 2009
30 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 31 (OCR)

BOEING SERVICE BULLETIN 777-27A0059
• SEE A  BALLSCREW
SEE C
MAINTENANCE
PLATFORM
SERVICE
ACCESS
DOOR, 311BL
SEE B) HORIZONTAL
STABILIZER
TEST
EQUIPMENT
SEE O
FWD A
J58814
Illustration la - Stabilizer Freeplay Test Equipment Installation
Appendix A: HORIZONTAL STABILIZER TRIM ACTUATOR - BALLSCREW-TO-BALLNUT FREEPLAY
INSPECTION
(SHEET 3 OF 9)
September 18, 2003
Revision 2 January 15, 2009  777-27A0059
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  31 of 37

### Page 32 (OCR)

BOEING SERVICE BULLETIN 777-27A0059
30-39 INCHES (0.8-1.0 METER)
HORIZONTZL STABILIZER
TEST EQUIPMENT
39-48 INCHES (1.0-1.2 METERS)
HORIZONTAL STABILIZER
TEST EQUIPMENT
48-58 INCHES (1.2-1.5 METERS)
HORIZONTAL STABILIZER
TEST EQUIPMENT
NOTE: MEASURE THE DISTANCE BETWEEN THE ATTACHMENT POINTS ON THE
AIRPLANE AND SET THE HORIZONTAL STABILIZER TEST EQUIPMENT
TO THE CORRECT POSITION.
ADJUST THE TOOL SO THAT THE THREADS ON EACH END (X AND Y),
ARE APPROXIMATELY THE SAME LENGTH.
Illustration 1b - Stabilizer Freeplay Test Equipment Installation
Appendix A: HORIZONTAL STABILIZER TRIM ACTUATOR - BALLSCREW-TO-BALLNUT FREEPLAY
INSPECTION
(SHEET 4 OF 9)
September 18, 2003
Revision 2 January 15, 2009  777-27A0059
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  32 of 37

### Page 33 (OCR)

BOEING SERVICE BULLETIN 777-27A0059
PIN
HORIZONTAL STABILIZER
TEST EQUIPMENT
UPPER ATTACHMENT
HORIZONTAL STABILIZER ~
TEST EQUIPMENT
PIN
LOWER ATTACHMENT
J58825
Illustration 1c - Stabilizer Freeplay Test Equipment Installation
Appendix A: HORIZONTAL STABILIZER TRIM ACTUATOR - BALLSCREW-TO-BALLNUT FREEPLAY
INSPECTION
(SHEET 5 OF 9)
September 18, 2003
Revision 2 January 15, 2009  777-27A0059
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  33 of 37

### Page 34 (OCR)

BOEING SERVICE BULLETIN 777-27A0059
• SEE M
RATCHET
SEE C
SERVICE ACCESS
DOOR, 311BL
HORIZONTAL
STABILIZER
TEST
EQUIPMENT
FWD ,  J58835
Illustration 2a - Ballscrew-to-Ballnut Freeplay Inspection
Appendix A: HORIZONTAL STABILIZER TRIM ACTUATOR - BALLSCREW-TO-BALLNUT FREEPLAY
INSPECTION
(SHEET 6 OF 9)
September 18, 2003
Revision 2 January 15, 2009  777-27A0059
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  34 of 37

### Page 35 (OCR)

BOEING SERVICE BULLETIN 777-27A0059
UPPER
GIMBAL
BALLSCREW  UPPER
ACTUATOR  STOP
BALLSCREW
DIAL
INDICATOR  LOWER GIMBAL
SEE (B  BALLNUT
DIAL
INDICATOR
LOWER
STOP
FWD •
STABILIZER BALLSCREW
TO BALLNUT FREEPLAY
A-A
HORIZONTAL
STABILIZER
BALLSCREW  MAGNETIC V-BASE
ATTACHED
• FWD  TO BALLSCREW
DIAL INDICATOR
(TYPICAL SETUP)
J58860
Illustration 2b - Ballscrew-to-Ballnut Freeplay Inspection
Appendix A: HORIZONTAL STABILIZER TRIM ACTUATOR - BALLSCREW-TO-BALLNUT FREEPLAY
INSPECTION
(SHEET 7 OF 9)
September 18, 2003
Revision 2 January 15, 2009  777-27A0059
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  35 of 37

### Page 36

Illustration 2c - Ballscrew-to-Ballnut Freeplay Inspection
g. Procedure
(1) Set the dial indicator to zero.
NOTE: On the ground with the stabilizer at the neutral position, the stabilizer center of gravity
loads the ballscrew in the upward direction which puts the ballscrew in compression.
CAUTION: DO NOT APPL Y MORE THAN 2500 POUNDS AS INDICATED ON THE FORCE GAUGE
OF THE HORIZONTAL STABILIZER FREEPLAY TEST EQUIPMENT. ALSO, DO NOT
APPL Y POWER TO THE STABILIZER TRIM ACTUATOR WITH THE HORIZONTAL
STABILIZER FREEPLAY TEST EQUIPMENT INSTALLED. THE HORIZONTAL
STABILIZER FREEPLAY TEST EQUIPMENT CAN BREAK OR CAUSE DAMAGE TO
THE AIRCRAFT.
(2) Slowly apply a downward force on the ballscrew by doing the following:
(a) Turn the horizontal stabilizer freeplay test equipment until the dial indicator stops moving.
Appendix A: HORIZONTAL STABILIZER TRIM ACTUATOR - BALLSCREW-TO-BALLNUT FREEPLAY
INSPECTION
(SHEET 8 OF 9)
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2 January 15, 2009
36 of 37
BOEING SERVICE BULLETIN 777-27A0059

### Page 37

NOTE: To apply a downward force on the stabilizer, the test equipment must be turned in
a clockwise direction that shortens the test equipment length.
(b) Use a ratchet to turn the horizontal stabilizer freeplay test equipment to apply 2250 pounds
as indicated on the force gauge.
(3) Record the indication on the dial indicator. This is the ballscrew-to-ballnut freeplay.
(4) Slowly release the downward force that was applied by the horizontal stabilizer freeplay test
equipment.
(5) If the freeplay is less than 0.004 inch (0.10 mm), then the stabilizer ballscrew-to-ballnut freeplay
measurement may be incorrect.
(a) Verify that the procedure was done correctly by checking that the stabilizer was loaded in the
correct direction and that the dial indicator is functioning normally.
(6) If the ballscrew-to-ballnut freeplay is greater than or equal to 0.004 inch (0.10 mm) and less than
0.016 inch (0.40 mm), then the stabilizer ballscrew-to-ballnut freeplay is within the acceptable limit.
(7) If the ballscrew-to-ballnut freeplay is greater than or equal to 0.016 inch (0.40 mm), then the
ballscrew-to-ballnut freeplay is beyond the maximum in-service wear limit. If the ballscrew-to-ballnut
freeplay is beyond the maximum in-service wear limit, then replace the horizontal stabilizer trim
actuator assembly. Refer to 777 AMM 27-41-13/401.
h. Put the Airplane Back To Its Usual Condition
(1) Remove the dial indicator base and dial indicator from the ballscrew and ballnut.
(2) Remove the horizontal stabilizer freeplay test equipment from between the lower fuselage and the
horizontal stabilizer.
(3) Close access panel 311BL.
(4) Remove the DO-NOT - OPERATE tags, and set the C STAB cutout switch and the R STAB cutout
switch to the NORM position.
(5) Remove the DO-NOT -CLOSE tags, and close these circuit breakers:
(a) On the E5-1 rack:
1) CBB2, STAB TRIM CNTL - R
(b) On the E2-6 rack:
1) CBB2, STAB TRIM CNTL - C
(6) If necessary, remove the DO-NOT -OPERATE tags, and set the three FLT CONTROL HYD VALVE
POWER switches to the SHUT OFF position.
Appendix A: HORIZONTAL STABILIZER TRIM ACTUATOR - BALLSCREW-TO-BALLNUT FREEPLAY
INSPECTION
(SHEET 9 OF 9)
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
September 18, 2003
777-27A0059Revision 2 January 15, 2009
37 of 37
BOEING SERVICE BULLETIN 777-27A0059

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
