# Boeing Alert Requirements Bulletin 777-29A0047 RB: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-3997; AD 2026-19-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Requirements Bulletin 777-29A0047 RB](https://openairdocs.org/service-documents/boeing/777-29a0047-rb.md)
- Title as filed: RB-777-29A0047-00--
- Pages: 11
- PDF: https://openairdocs.org/files/sha256/c4/29/c429e4890c5a7ef89310d9429e115196c91a3c9637687922c2c355f1a867af61
- Page: https://openairdocs.org/service-documents/boeing/777-29a0047-rb/file/c429e4890c5a

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
777
Requirements Bulletin
ALERT
Number: 777-29A0047 RB
Original Issue: September 11, 2025
ATA System: 2911
SUBJECT: HYDRAULIC POWER - Hydraulic System - Alternating Current Motor Pump Inspection
EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations
(EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for
export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per
Supp.1 to Part 740 of the EAR.
9E991ECCN:
Copyright © 2025 The Boeing Company
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: September 11, 2025
777-29A0047 RB
1 of 11
3.0

### Page 2

Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 11, 2025
777-29A0047 RB
2 of 11
REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
1. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
A. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
B. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
A. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
B. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 11, 2025
777-29A0047 RB
3 of 11
REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 11, 2025
777-29A0047 RB
4 of 11
REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
777
Requirements Bulletin
ALERT
Number: 777-29A0047 RB
Original Issue: September 11, 2025
ATA System: 2911
SUBJECT: HYDRAULIC POWER - Hydraulic System - Alternating Current Motor Pump Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO THE NEW
OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER.
THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED
TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT
THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE
INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB WHICH
THE SB REFERS TO AS THE RELATED DOCUMENT.
1. Effectivity
A. Airplanes
This bulletin is applicable to 777-200, 777-200LR, 777-300, 777-300ER, 777F Airplane(s), line
number(s) 1-1566, 1568-1571 in 1 Group(s). Where the effectivity is presented with hyphens
between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers
1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group Information for the applicable airplanes is given below.
DESCRIPTIONCONFIGURATIONGROUP
777-200, 777-200LR, 777-300, 777-300ER and 777F airplanes that
could have Eaton Alternating Current Motor Pump (ACMP) P/N
731966 installed.
-1
Airplane Models:
777-200, 777-200LR, 777-300, 777-300ER, 777F
GroupVariable Number
1WA001 - WA017
1WA076 - WA080
1WA086 - WA093
1WA101 - WA104
GroupVariable Number
1WA116 - WA119
1WA131 - WA137
1WA171 - WA175
1WA196 - WA198
GroupVariable Number
1WA206 - WA212
1WA221 - WA223
1WA231 - WA232
1WA241 - WA250
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 11, 2025
777-29A0047 RB
5 of 11

### Page 6

GroupVariable Number
1WA261 - WA266
1WA281 - WA283
1WA301 - WA304
1WB001 - WB021
1WB031 - WB046
1WB051 - WB088
1WB101 - WB106
1WB121 - WB125
1WB131 - WB148
1WB151 - WB155
1WB161 - WB177
1WB181 - WB194
1WB201 - WB215
1WB231 - WB247
1WB271 - WB273
1WB276 - WB286
1WB291 - WB302
1WB306 - WB307
1WB311 - WB337
1WB341 - WB342
1WB366 - WB368
1WB371 - WB388
1WB406
1WB411 - WB413
1WB416 - WB439
1WB446 - WB453
1WB476
1WB481 - WB484
1WB501 - WB512
1WB531 - WB537
1WB551 - WB554
1WB591 - WB597
1WB601 - WB606
GroupVariable Number
1WB611 - WB622
1WB631 - WB638
1WB646 - WB649
1WC051 - WC073
1WC101 - WC104
1WC111 - WC120
1WC221 - WC224
1WC241 - WC243
1WC281 - WC290
1WC301 - WC308
1WC361 - WC364
1WC371 - WC374
1WC381 - WC395
1WC441
1WC446 - WC449
1WC456 - WC459
1WC486 - WC493
1WC506 - WC508
1WC521 - WC522
1WC531 - WC536
1WC546 - WC548
1WC556
1WC566 - WC567
1WC571 - WC574
1WC581
1WC586 - WC587
1WC591 - WC595
1WD001 - WD002
1WD011 - WD018
1WD031 - WD036
1WD046 - WD055
1WD066 - WD075
1WD081 - WD089
GroupVariable Number
1WD091
1WD096
1WD101 - WD106
1WD111 - WD112
1WD116 - WD117
1WD121 - WD122
1WD501 - WD513
1WD521 - WD541
1WD546 - WD554
1WD561 - WD573
1WD581 - WD599
1WD606 - WD609
1WD621 - WD632
1WD651 - WD665
1WD671 - WD677
1WD691 - WD709
1WD741 - WD752
1WD761 - WD771
1WD786 - WD788
1WD796 - WD837
1WD846 - WD867
1WD871 - WD918
1WD921 - WD957
1WD966 - WD970
1WD981 - WD982
1WD986 - WD987
1WD991 - WD996
1WE001 - WE007
1WE011 - WE012
1WE021 - WE026
1WE031 - WE040
1WE051 - WE057
1WE071 - WE078
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 11, 2025
777-29A0047 RB
6 of 11
REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT

### Page 7

GroupVariable Number
1WE081 - WE084
1WE091 - WE095
1WE126 - WE178
1WE186 - WE219
1WE226 - WE231
1WE236 - WE253
1WE261 - WE267
1WE271 - WE278
1WE291 - WE298
1WE301 - WE320
1WE331 - WE347
1WE351 - WE356
1WE366 - WE368
1WE376 - WE377
1WE381
1WE386 - WE387
1WE391 - WE392
1WE396 - WE405
1WE416 - WE420
1WE426 - WE431
1WE436 - WE446
1WE451 - WE482
1WE486 - WE493
1WE495 - WE499
GroupVariable Number
1WE501 - WE504
1WE511 - WE516
1WE526 - WE528
1WE536 - WE549
1WE556 - WE571
1WE576 - WE585
1WE591
1WE601 - WE605
1WE626 - WE627
1WE631
1WE641 - WE642
1WE646 - WE647
1WE651 - WE661
1WE666 - WE677
1WE681 - WE687
1WE701 - WE705
1WE711 - WE712
1WE731 - WE732
1WE736 - WE740
1WE746 - WE767
1WE776 - WE786
1WE791 - WE792
1WE796 - WE798
1WE811 - WE812
GroupVariable Number
1WE826 - WE828
1WE831 - WE835
1WE851 - WE853
1WF001 - WF004
1WF016 - WF027
1WF031 - WF043
1WF046 - WF073
1WF075 - WF077
1WF081 - WF088
1WF096 - WF101
1WF106 - WF109
1WF111 - WF124
1WF131 - WF144
1WF146 - WF147
1WF151 - WF152
1WF156 - WF160
1WF166 - WF173
1WF176 - WF184
1WF191
1WF206 - WF210
1WF216 - WF217
1WF221 - WF223
1WF231 - WF232
--
B. Spares Affected
Examine your spares supply for the parts or components identified below. If any parts or components
are found, refer to Eaton Aerospace SB 731966-29-02 for the recommended action.
NamePart Number
Alternating Current Motor Pump (ACMP)731966 (a)
(a) The existing ACMP can be modified to the new ACMP configuration in accordance with Eaton
Aerospace SB 731966-29-02.
2. CONCURRENT REQUIREMENTS
None.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 11, 2025
777-29A0047 RB
7 of 11
REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT

### Page 8

3. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
Requirements Bulletin 777-29A0047 RB. The Airworthiness Directive will make the compliance tasks and
times given in Requirements Bulletin 777-29A0047 RB mandatory.
Accomplish the required action(s), based on the applicable condition(s) in Table 1, in accordance with
Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Table 1: Alternating Current Motor Pump Part Number Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Within 60 months after
the Original Issue date of
Requirements Bulletin
777-29A0047 RB.
OPTION 1: Do a mainte-
nance records check for
any installed Alternating
Current Motor Pumps
(ACMP) with part num-
bers 731966.
All Airplanes
-OPTION 2: Do an inspec-
tion for any installed
ACMP with part numbers
731966.
-Within 60 months after
the Original Issue date of
Requirements Bulletin
777-29A0047 RB.
Replace any ACMP part
number 731966 with
ACMP part number
3033115-100 or later ap-
proved ACMP part num-
ber at the affected loca-
tion(s).
CONDITION 1: ANY ACMP
WITH PART NUMBER
731966 FOUND
--No further action is re-
quired.
CONDITION 2: ACMP
WITH PART NUMBER
731966 NOT FOUND
4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA) approved for all EASA approved airplanes listed in this Requirements
Bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery
configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 11, 2025
777-29A0047 RB
8 of 11
REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT

### Page 9

5.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. In the RB, the "Refer to the listed procedures..." column of the
table(s) in the Work Instructions is for reference only. The procedures in that column
are not required by the AD and are for guidance only. For the related SB, some
locations are marked RC Start and RC End to identify the requirements that are
restated from the RB. For the related SB, the areas between RC Start and RC End,
including sub-steps and any figures identified between RC Start and RC End, must
be done to comply with the AD. Therefore, an Alternative Method of Compliance
(AMOC) is required for any deviations to steps between RC Start and RC End,
including substeps and identified figures. For the related SB, the steps not between
RC Start and RC End may be deviated from using accepted methods in accordance
with the operator's maintenance or inspection program without obtaining approval
of an AMOC; this is provided that the steps between RC Start and RC End, including
sub-steps and identified figures, can still be done as specified, and the airplane can
be put back in an airworthy condition. Figures not required for compliance are omitted
from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 777 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 777
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 777
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 11, 2025
777-29A0047 RB
9 of 11
REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT

### Page 10

5. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
6. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
7. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
8. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
9. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION,
do all of the ACTION numbers for that CONDITION or OPTION.
10. The instructions in Work Instructions and the figures can include operation of tools
or test equipment. Boeing Engineering Tool Drawings, the Illustrated Tool and
Equipment Manual, and the Special Tool and Ground Handling Drawing Index contain
data on versions of the tools or test equipment that you can use. It is permitted to
use replaced tools. It is not permitted to use superseded tools.
11. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
12. Later approved parts are only those Boeing parts that are approved as a replacement
for the part specified in this bulletin and approved as part of the type design by the
FAA after the issuance of this bulletin.
13. A maintenance records check to determine installation of Alternating Current Motor
Pump (ACMP) part number 731966 can be done provided the part number can be
conclusively determined from that check.
B. WORK INSTRUCTIONS
Actions Required For Compliance
1. Requirements:
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 11, 2025
777-29A0047 RB
10 of 11
REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT

### Page 11

Table 1: Alternating Current Motor Pump Part Number Inspection
Refer to the listed
procedures in SB
777-29A0047
Original Issue or
later approved re-
visions as an ac-
cepted proce-
dure.
Method of ComplianceActionCondition
--OPTION 1: Do a mainte-
nance records check for
any installed Alternating
Current Motor Pumps
(ACMP) with part num-
bers 731966.
All Airplanes
Do PART 1: OPEN
ACCESS
-OPTION 2: Do an inspec-
tion for any installed
ACMP with part numbers
731966. FIGURE 1-
Do PART 2: ACMP
REPLACEMENT
-Replace any ACMP part
number 731966 with
ACMP part number
3033115-100 or later ap-
proved ACMP part num-
ber at the affected loca-
tion(s).
CONDITION 1: ANY ACMP
WITH PART NUMBER
731966 FOUND Do PART 3:
CLOSE ACCESS
-
Do PART 3:
CLOSE ACCESS
-No further action is re-
quired.
CONDITION 2: ACMP
WITH PART NUMBER
731966 NOT FOUND
Export Controlled ECCN: 9E991
See page 1 for details
Original Issue: September 11, 2025
777-29A0047 RB
11 of 11
REQUIREMENTS BULLETIN 777-29A0047
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
