# Boeing Alert Service Bulletin 777-32A0103: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-0463; AD 2016-17-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 777-32A0103](https://openairdocs.org/service-documents/boeing/777-32a0103.md)
- Title as filed: U.S. DOT/FAA - SB-777-32A0103-01
- Pages: 51
- PDF: https://openairdocs.org/files/sha256/54/b1/54b1f0adc2664618650bb16242db0869e711b17b0122d0d0a0b0381164271d3c
- Page: https://openairdocs.org/service-documents/boeing/777-32a0103/file/54b1f0adc266

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
777
Service Bulletin
ALERT
Number: 777-32A0103
Original Issue: September 11, 2015
Revision 1: December 10, 2015
ATA System: 3211
SUBJECT: LANDING GEAR - Main Landing Gear - Aft Trunnion Pin Inspection and Replacement
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2015 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
1 of 51
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
2 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 21
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 25
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 26
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
FIGURE 1: LEFT MAIN LANDING GEAR AFT TRUNNION PIN - DETAILED INSPECTION . . . . . . 32
FIGURE 2: RIGHT MAIN LANDING GEAR AFT TRUNNION PIN - DETAILED INSPECTION . . . . . 34
FIGURE 3: LEFT MAIN LANDING GEAR AFT TRUNNION PIN - REPLACEMENT  [Group 1] . . . . . 36
FIGURE 4: RIGHT MAIN LANDING GEAR AFT TRUNNION PIN - REPLACEMENT  [Group 1] . . . . 39
FIGURE 5: LEFT MAIN LANDING GEAR AFT TRUNNION PIN - REPLACEMENT  [Group 2] . . . . . 42
FIGURE 6: RIGHT MAIN LANDING GEAR AFT TRUNNION PIN - REPLACEMENT  [Group 2] . . . . 45
APPENDIX A: LOGIC DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
APPENDIX B: ACCEPTABLE AFT TRUNNION PIN ASSEMBLY PART NUMBERS . . . . . . . . . . . . 50
APPENDIX C: PART DEMAND INTENT SURVEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
3 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
4 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
777
Service Bulletin
ALERT
Revision Transmittal SheetNumber: 777-32A0103Original Issue: September 11, 2015
Revision 1: December 10, 2015
ATA System: 3211
SUBJECT: LANDING GEAR - Main Landing Gear - Aft Trunnion Pin Inspection and Replacement
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Effects of this Revision on airplanes on which the Original Issue was previously done:
None.
REASON FOR REVISION
This revision is sent to remove airplane line numbers 1331 through 1343 from the effectivity. These airplanes
were or will be delivered after the Original Issue date of this service bulletin (SB). The SB is revised to reflect
type design at the time of delivery. However, it is understood that the FAA Airworthiness Directive related to this
SB will be applicable to all Boeing 777 airplanes due to concerns about rotable parts.
These sections were changed:
1. Paragraph 1.A.1., Airplanes: Removed line numbers 1331 through 1343.
2. Paragraph 1.K.1, Publications: Removed a publication reference.
3. Paragraph 2.A., Material - Price and Availability: Revised table.
4. Paragraph 2.B., Industry Support Information: Revised warranty statement.
The data given in Information Notice 777-32A0103 IN 01 is included in this revision.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Pages with no vertical lines have no changes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
5 of 51

### Page 6

REVISION HISTORY
September 11, 2015Original Issue:
December 10, 2015Revision 1:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
6 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 7

Commercial 
Airplanes
777
Service Bulletin
ALERT
SummaryNumber: 777-32A0103Original Issue: September 11, 2015
Revision 1: December 10, 2015
ATA System: 3211
SUBJECT: LANDING GEAR - Main Landing Gear - Aft Trunnion Pin Inspection and Replacement
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin gives instructions to perform a records check or Detailed Inspection of the main landing
gear (MLG) for aft trunnion pins with serial numbers that begin with "EGL" or "MAL", and to replace them if
found. MLG aft trunnion pins with these serial numbers could have a manufacturing defect that can cause them
to fracture. If this service bulletin is not done, fracture of a MLG aft trunnion pin could result in the collapse of a
MLG, which could result in loss of control of the airplane during landing.
After a landing where pilots were required to input corrections due to airplane yaw and roll to the right, the MLG
aft trunnion pin was found to be fractured. Other damage included minor damage to the gear beam, trunnion
door panel and a broken tie-rod. Materials analysis of the fractured pin showed that the crack started from an
area of heat damage introduced during manufacturing. A review of gear overhaul records indicated that other
pins manufactured by the same supplier had similar signs of heat damage, suspected to have been caused by
abusive chrome grinding. This evidence suggests that the heat damage occurred during manufacturing, so it is
possible that other airplanes can have aft trunnion pins with similar heat damage.
Boeing Multi-Operator Message (MOM) MOM-MOM-15-0303-01B is related to this service bulletin. Operators
that have identified the serial number in order to respond to the questions asked in this MOM do not need to do
PART 1 of the work instructions.
Boeing Service Related Problem (SRP) 777-SRP-32-0202 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 777 FTD 32-14005 is related to this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
7 of 51

### Page 8

This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedYesSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsYesKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
NoOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION
Do a records check or Detailed Inspection of the Main Landing Gear Aft Trunnion Pins to identify the serial
number and to look for a "BASE METAL INSPECTED" marking. If the serial number begins with "EGL" or "MAL",
and a "BASE METAL INSPECTED" marking is not found, replace the aft trunnion pin. If the serial number does
not begin with "EGL" or "MAL", or a "BASE METAL INSPECTED" marking is found, no more work is necessary.
EFFECTIVITY
777-200, -200LR, -300, -300ER, and 777F Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected
airplane(s).
Refer to Paragraph 1.A.2., Spares Affected for the list of affected components.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for 777 airplanes in warranty as of November 17, 2014. Additionally,
Boeing has elected to extend a business consideration for out-of-warranty airplanes with line numbers 1 through
504 and line number 784 (Business Consideration Airplanes). Please refer to Paragraph 2.B., Industry Support
Information.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
8 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 9

MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
Operators are encouraged to complete the survey provided in APPENDIX C of this service bulletin to help Boeing
predict the quantity and timing of the Boeing Supplied Kits/Parts.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
9 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 10 (OCR)

BOEING SERVICE BULLETIN 777-32A0103
ALERT  ALERT
DO A RECORDS CHECK OR DETAILED INSPECTION
OF EACH MAIN LANDING  GEAR AFT TRUNNION PIN
IF NECESSARY, REPI  _ACE AFT TRUNNION PIN
MAIN LANDING GEAR
2421615
Original Issue: September 11, 2015
Revision 1: December 10, 2015  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-32A0103
Work - See page 1 for details.  10 of 51

### Page 11

Commercial 
Airplanes
777
Service Bulletin
ALERT
Number: 777-32A0103
Original Issue: September 11, 2015
Revision 1: December 10, 2015
ATA System: 3211
SUBJECT: LANDING GEAR - Main Landing Gear - Aft Trunnion Pin Inspection and Replacement
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D624W001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is applicable to 777 Airplanes, line numbers 1-1330 in 2 Groups. The Variable
Numbers and Group Information for the applicable airplanes is given below.
DESCRIPTIONCONFIGURATIONGROUP
777-200 and -300 Airplanes-1
777-200LR, -300ER, and 777F Airplanes-2
Airplane Models:
777-200, 777-200LR, 777-300, 777-300ER, 777F
GroupVariable Number
1WA001 - WA017
1WA076 - WA080
1WA086 - WA093
1WA101 - WA104
1WA116 - WA119
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
11 of 51

### Page 12

GroupVariable Number
1WA131 - WA137
1WA171 - WA175
1WA196 - WA198
1WA206 - WA212
1WA221 - WA223
1WA231 - WA232
1WA241 - WA250
1WA261 - WA266
1WA281 - WA283
1WA301 - WA304
1WB001 - WB021
1WB031 - WB046
1WB051 - WB088
1WB101 - WB106
1WB121 - WB125
1WB131 - WB148
1WB151 - WB155
1WB161 - WB177
1WB181 - WB194
1WB201 - WB215
1WB231 - WB247
1WB271 - WB273
1WB276 - WB286
1WB291 - WB302
1WB306 - WB307
1WB311 - WB337
1WB341 - WB342
1WB366 - WB368
1WB371 - WB388
1WB406
1WB411 - WB413
1WB416 - WB439
1WB446 - WB453
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
12 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 13

GroupVariable Number
1WB476
1WB481 - WB484
1WB501 - WB512
1WB531 - WB537
1WB551 - WB554
1WB591 - WB597
1WB601 - WB606
1WB611 - WB622
1WB631 - WB638
1WB646 - WB649
1WC051 - WC073
1WC101 - WC104
1WC111 - WC120
1WC221 - WC224
1WC241 - WC243
1WC281 - WC290
1WC301 - WC308
1WC361 - WC364
1WC371 - WC374
1WC381 - WC395
1WC441
1WC446 - WC449
1WC456 - WC459
1WC486 - WC493
1WC506 - WC508
1WC521 - WC522
1WC531 - WC536
1WC546 - WC548
1WC556
1WC566 - WC567
1WC571 - WC574
1WC581
1WC586 - WC587
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
13 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 14

GroupVariable Number
1WC591 - WC595
2WD001 - WD002
2WD011 - WD018
2WD031 - WD036
2WD046 - WD055
2WD066 - WD075
2WD081 - WD089
2WD091
2WD096
2WD101 - WD106
2WD111 - WD112
2WD116 - WD117
2WD121 - WD122
2WD501 - WD513
2WD521 - WD541
2WD546 - WD554
2WD561 - WD573
2WD581 - WD599
2WD606 - WD609
2WD621 - WD632
2WD651 - WD665
2WD671 - WD677
2WD691 - WD709
2WD741 - WD752
2WD761 - WD771
2WD786 - WD788
2WD796 - WD837
2WD846 - WD867
2WD871 - WD899
2WD911 - WD918
2WD921 - WD932
2WD936 - WD957
2WD966 - WD970
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
14 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 15

GroupVariable Number
2WD981 - WD982
2WD986 - WD987
2WD991 - WD994
2WD996
2WE001 - WE007
2WE011 - WE012
2WE021 - WE026
2WE031 - WE036
2WE051 - WE057
2WE071 - WE078
2WE081 - WE084
2WE091 - WE095
2WE126 - WE147
2WE151 - WE170
2WE176 - WE178
2WE186 - WE219
2WE226 - WE231
2WE236 - WE253
2WE261 - WE267
2WE271 - WE278
2WE291 - WE296
2WE301 - WE317
2WE331 - WE343
2WE351 - WE356
2WE376 - WE377
2WE381
2WE386 - WE387
2WE391 - WE392
2WE396 - WE401
2WE416 - WE420
2WE426 - WE427
2WE436 - WE439
2WE441 - WE445
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
15 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 16

GroupVariable Number
2WE451 - WE458
2WE471 - WE474
2WE486 - WE491
2WE501 - WE504
2WE511 - WE513
2WE526 - WE528
2WE536 - WE539
2WE556 - WE562
2WE566 - WE567
2WE591
2WE601 - WE604
2WE631
2WF001 - WF004
2WF016 - WF027
2WF031 - WF043
2WF046 - WF067
2WF075 - WF077
2WF081 - WF088
2WF096 - WF101
2WF106 - WF109
2WF111 - WF118
2WF121 - WF124
2WF131 - WF133
2WF136 - WF140
2WF146 - WF147
2WF151 - WF152
2WF156 - WF160
2WF166 - WF173
2WF176 - WF177
2WF181 - WF182
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
16 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 17

2. Spares Affected
Examine your spares supply for the parts or components identified below . If any parts or
components are found, refer to Paragraph 3.B., Work Instructions for the recommended action.
Part Number
161W0004-3
161W1301-1
161W1301-3
161W1301-5
161W1301-7
161W1301-9
B. Concurrent Requirements
None.
C. Reason
This service bulletin gives instructions to perform a records check or Detailed Inspection of the main
landing gear (MLG) for aft trunnion pins with serial numbers that begin with "EGL" or "MAL", and to
replace them if found. MLG aft trunnion pins with these serial numbers could have a manufacturing
defect that can cause them to fracture. If this service bulletin is not done, fracture of a MLG aft trunnion
pin could result in the collapse of a MLG, which could result in loss of control of the airplane during
landing.
After a landing where pilots were required to input corrections due to airplane yaw and roll to the right,
the MLG aft trunnion pin was found to be fractured. Other damage included minor damage to the gear
beam, trunnion door panel and a broken tie-rod. Materials analysis of the fractured pin showed that
the crack started from an area of heat damage introduced during manufacturing. A review of gear
overhaul records indicated that other pins manufactured by the same supplier had similar signs of heat
damage, suspected to have been caused by abusive chrome grinding. This evidence suggests that
the heat damage occurred during manufacturing, so it is possible that other airplanes can have aft
trunnion pins with similar heat damage.
Boeing Multi-Operator Message (MOM) MOM-MOM-15-0303-01B is related to this service bulletin.
Operators that have identified the serial number in order to respond to the questions asked in this MOM
do not need to do PART 1 of the work instructions.
Boeing Service Related Problem (SRP) 777-SRP-32-0202 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 777 FTD 32-14005 is related to this service bulletin.
Revision 1 is sent to remove airplane line numbers 1331 through 1343 from the effectivity. These
airplanes were or will be delivered after the Original Issue date of this service bulletin (SB). The SB is
revised to reflect type design at the time of delivery. However, it is understood that the FAA Airworthiness
Directive related to this SB will be applicable to all Boeing 777 airplanes due to concerns about rotable
parts.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
17 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 18

The data given in Information Notice 777-32A0103 IN 01 is included in this revision.
D. Description
Do a records check or Detailed Inspection of the Main Landing Gear Aft Trunnion Pins to identify the
serial number and to look for a "BASE METAL INSPECTED" marking. If the serial number begins with
"EGL" or "MAL", and a "BASE METAL INSPECTED" marking is not found, replace the aft trunnion pin.
If the serial number does not begin with "EGL" or "MAL", or a "BASE METAL INSPECTED" marking
is found, no more work is necessary.
Effects of this Revision on airplanes on which Original Issue was previously done:
None
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
143, 144, 731, 735, 741, 745777-200, 777-300
Group 2:
Affected Maintenance Zones
ZoneModel
143, 144, 731, 735, 741, 745777-200LR, 777-300ER, 777F
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing Multi-Operator Message (MOM) MOM-MOM-15-0303-01B is related to this service bulletin.
Operators that have identified the serial number in order to respond to the questions asked in this MOM
do not need to do PART 1 of the work instructions.
A logic diagram showing compliance tasks and compliance times is included as an aid in Appendix A.
Do the required actions in accordance with Paragraph 3. Accomplishment Instructions.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
18 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 19

Table 1: AFT TRUNNION PIN IDENTIFICATION AND REPLACEMENT
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 36 months after the
original issue date of this
service bulletin.
Do PART 1: AFT TRUNNION PIN
IDENTIFICATION.
All airplanes
-Within 36 months after the
original issue date of this
service bulletin.
Do PART 2: AFT TRUNNION PIN
REPLACEMENT. (a)
CONDITION 1: AFT
TRUNNION PIN SERIAL
NUMBER BEGINNING
WITH "EGL" OR "MAL"
FOUND AND AFT TRUN-
NION PIN IS NOT PERMA-
NENTLY MARKED, "BASE
METAL INSPECTED".
--No more work is necessary. (a)CONDITION 2: AFT
TRUNNION PIN SERIAL
NUMBER BEGINNING
WITH "EGL" OR "MAL"
FOUND AND AFT TRUN-
NION PIN IS FOUND
PERMANENTLY
MARKED, "BASE METAL
INSPECTED".
--No more work is necessary. (a)CONDITION 3: NO AFT
TRUNNION PIN SERIAL
NUMBER BEGINNING
WITH "EGL" OR "MAL"
FOUND.
(a) This is a terminating action for this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
19 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 20

G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools.
NOTE: For PART 1, OPTION 1: RECORDS CHECK, the number of persons and time necessary to
do the records check will be different for each operator.
PART 1, OPTION 2: DETAILED INSPECTION
Elapsed HoursTask HoursNumber of PersonsTask
0.500.501Open Access
0.100.101FIGURE 1
0.100.101FIGURE 2
0.500.501Close Access
1.201.20TOTAL FOR EACH AIRPLANE
Group 1:
PART 2: AFT TRUNNION PIN REPLACEMENT
Elapsed HoursTask HoursNumber of PersonsTask
2.6013.005Open Access
4.008.002FIGURE 3 or FIGURE 4
2.6013.005Close Access
9.2034.00TOTAL FOR EACH AFT TRUNNION PIN
Group 2:
PART 2: AFT TRUNNION PIN REPLACEMENT
Elapsed HoursTask HoursNumber of PersonsTask
2.6013.005Open Access
4.008.002FIGURE 5 or FIGURE 6
2.6013.005Close Access
9.2034.00TOTAL FOR EACH AFT TRUNNION PIN
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
20 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 21

H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Boeing Multi-Operator Message (MOM) MOM-MOM-15-0303-01B
b. Boeing Service Related Problem (SRP) 777-SRP-32-0202
c. Component Maintenance Manual (CMM) 32-11-03, 32-11-65
d. Service Bulletin Index D624W001
e. 777 Aircraft Maintenance Manual (AMM) 32-00-15, 32-00-30, 32-11-01
f. 777 Fleet Team Digest (FTD) 32-14005
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None
K. Publications Affected
1. Publications:
Chapter-SectionPublication
32-11777 Illustrated Parts Catalog
32-11Component Maintenance Manual
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability
information.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
21 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 22

M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
22 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 23

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the parts shown in Paragraph 2.C., Parts Necessary for Each Airplane . Operators
are encouraged to share schedule requirements with Boeing for incorporation of the service bulletin.
The parts are subject to the terms and conditions of the Boeing standard purchase order
acknowledgment. Prices are in United States Dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of these methods:
1. Order on-line via ATA Spec 2000 or The Boeing PART Page
2. Fax to (206) 662-7145
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the original issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
original issue
date of this Ser-
vice Bulletin (Cal-
endar Days)
QTYDateNamePart Number
$5,291.00-12September 17, 2015Aft Trunnion Pin
Assembly
161W1301-3
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
23 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 24

REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the original issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
original issue
date of this Ser-
vice Bulletin (Cal-
endar Days)
QTYDateNamePart Number
$5,291.003918November 16, 2015Aft Trunnion Pin
Assembly
161W1301-9
8January 15, 2016
260January 22, 2016
8February 15, 2016
8March 15, 2016
40April 13, 2016
8April 15, 2016
50May 11, 2016
10May 16, 2016
50June 13, 2016
10June 15, 2016
50July 13, 2016
10July 15, 2016
10August 11, 2016
10August 15, 2016
10September 13, 2016
6September 15, 2016
10October 12, 2016
10November 10, 2016
10December 13, 2016
Operators are encouraged to complete the survey provided in APPENDIX C of this service bulletin to
help Boeing predict the quantity and timing of the Boeing Supplied Kits/Parts.
B. Industry Support Information
Boeing warranty remedies are available for 777 airplanes in warranty as of November 17, 2014. For
inspection labor task hour reimbursement for airplanes in warranty as of that date, send a warranty
claim to Boeing Fleet Support Contracts - Warranty. If the condition described in this service bulletin
is found during the inspection for airplanes in warranty as of that date and additional task hours and
parts are required, send a warranty claim to Boeing Fleet Support Contracts - Warranty.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
24 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 25

Additionally, Boeing has elected to extend a business consideration for out-of-warranty airplanes with
line numbers 1 through 504 and line number 784 (Business Consideration Airplanes). If the condition
described in this service bulletin is found during the inspection of Business Consideration Airplanes
and Part Number 161W1301-7 or 161W1301-9 is required, send a warranty claim to Boeing Fleet
Support Contracts - Warranty to receive the aforementioned parts at no-charge.
The warranty remedies and Business Consideration will expire eight years from the original release
date of this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
Group 1:
NotesExisting Part NumberNameQTYNew Part Number
(a)161W0004-3, 161W1301-1,
161W1301-3, 161W1301-5,
161W1301-7
Aft Trunnion Pin Assembly2 (b)161W1301-7  (161W1301-9 optional)
(a) Main Landing Gear Aft Trunnion Pin Assembly part number 161W1301-9 is designed for heavier gross
weight airplanes (Group 2) and therefore can be substituted for part numbers 161W1301-1, -3, -5, -7, and
161W0004-3, which were installed on Group 1 airplanes.
(b) Quantity of Aft Trunnion pins depends on number requiring replacement. One aft trunnion pin is necessary
for each main landing gear.
Group 2:
NotesExisting Part NumberNameQTYNew Part Number
161W1301-9Aft Trunnion Pin Assembly2 (a)161W1301-9
(a) Quantity of Aft Trunnion Pins depends on number requiring replacement. One aft trunnion pin is necessary
for each main landing gear.
2. Parts and Materials Supplied by the Operator
None.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
25 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 26

E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
26 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 27

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 777 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 777
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 777
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
5. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
27 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 28

7. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
8. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
9. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
10. This service bulletin includes functional test procedures for the systems changed by
this service bulletin. More functional tests can possibly be necessary in accordance
with standard maintenance practices because of interruption to other airplane systems.
11. If shading is used, shaded areas in Figures are to separate the non-critical and
non-authoritative information from the critical and authoritative information.
12. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
13. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an
OPTION number, do all of the ACTION numbers for that CONDITION number or
OPTION number.
14. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
15. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. An Alternative Method of
Compliance (AMOC) is required for any deviations to RC steps, including sub-steps
and identified figures. Steps not labeled as RC may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC. This is provided that the RC steps, including
sub-steps and identified figures, can still be done as specified, and the airplane can
be put back in an airworthy condition.
B. WORK INSTRUCTIONS
1. Do PART 1: AFT TRUNNION PIN IDENTIFICATION.
NOTE: Operators that have identified the serial number in order to respond to the questions
asked in MOM-MOM-15-0303-01B do not need to do this step, provided that it can be
positively determined that the MLG aft trunnion pin has not been replaced since
accomplishing the actions specified in MOM-MOM-15-0303-01B. Continue with Step 2
below. If the MLG aft trunnion pin has been replaced since accomplishing the actions
specified in MOM-MOM-15-0303-01B, do PART 1: AFT TRUNNION PIN IDENTIFICATION.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
28 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 29

2. Do the applicable step for each aft trunnion pin:
a. CONDITION 1: AFT TRUNNION PIN SERIAL NUMBER BEGINNING WITH "EGL" OR "MAL"
FOUND AND AFT TRUNNION PIN IS NOT PERMANENTLY MARKED, "BASE METAL
INSPECTED".
(1) Do PART 2: AFT TRUNNION PIN REPLACEMENT.
b. CONDITION 2: AFT TRUNNION PIN SERIAL NUMBER BEGINNING WITH "EGL" OR "MAL"
FOUND AND AFT TRUNNION PIN IS FOUND PERMANENTLY MARKED, "BASE METAL
INSPECTED".
(1) No more work is necessary.
c. CONDITION 3: NO AFT TRUNNION PIN SERIAL NUMBER BEGINNING WITH "EGL" OR
"MAL" FOUND.
(1) No more work is necessary.
3. Put the airplane back to a serviceable condition.
PART 1: AFT TRUNNION PIN IDENTIFICATION
1. Do one of the options below:
a. OPTION 1: RECORDS CHECK
(1) Records check of Spare Aft Trunnion Pins:
(a) Do a records check of all aft trunnion pins in spares inventory to determine if any
serial number begins with "EGL" or "MAL", and if the aft trunnion pin is permanently
marked, "BASE METAL INSPECTED".
(2) Records check of Installed Aft Trunnion Pins:
(a) RC - Do a records check to find if an aft trunnion pin with a serial number that begins
with "EGL" or "MAL" is installed in either of the two (2) aft trunnion pin locations on
the airplane, and if the aft trunnion pin is permanently marked, "BASE METAL
INSPECTED".
NOTE: Records to be checked include, but are not limited to, the Aircraft Readiness
Log (ARL), Safe Life Part Record Keeping System, and maintenance
records.
b. OPTION 2: DETAILED INSPECTION
(1) Inspection of Spare Aft Trunnion Pins:
(a) Do a Detailed Inspection of all aft trunnion pins in spares inventory to determine if
any serial number begins with "EGL" or "MAL" and if the aft trunnion pin is
permanently marked, "BASE METAL INSPECTED".
(2) Inspection of Installed Aft Trunnion Pins:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
29 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 30

(a) If downlock pins are not installed in the nose and main landing gear, install downlock
pins. Refer to 777 AMM 32-00-30 as an accepted procedure.
(b) Install the landing gear door safety pins. Refer to 777 AMM 32-00-15 as an accepted
procedure.
(c) Open access to the aft trunnion pin. Refer to 777 AMM 32-11-01 as an accepted
procedure.
(d) RC - Do a Detailed Inspection of the main landing gear aft trunnion pin in accordance
with the figures below:
– Left side: Use FIGURE 1.
– Right side: Use FIGURE 2.
PART 2: AFT TRUNNION PIN REPLACEMENT
CAUTION: DO NOT INSTALL AN AFT TRUNNION PIN WITH A SERIAL NUMBER THAT BEGINS
WITH "EGL" OR "MAL" UNLESS THAT AFT TRUNNION PIN RECEIVES A DETAILED
INSPECTION AND REPAIR IN ACCORDANCE WITH CMM 32-11-03, "REPAIR 16-2"
TEMPORARY REVISION 32-7004, DATED MARCH 01, 2015 OR LATER BOEING
APPROVED REVISIONS THAT ARE PUBLISHED ON MYBOEINGFLEET; OR IN
ACCORDANCE WITH CMM 32-11-65, "REPAIR 3-2" TEMPORARY REVISION 32-7005,
DATED MARCH 01, 2015 OR LATER BOEING APPROVED REVISIONS THAT ARE
PUBLISHED ON MYBOEINGFLEET. INSPECTED AND REPAIRED AFT TRUNNION
PINS WILL BE MARKED "BASE METAL INSPECTED".
1. Disposition of Spare Aft Trunnion Pins:
a. Discard affected spare aft trunnion pins or repair them in accordance with the applicable CMM
below:
(1) Aft trunnion pins 161W0004-3, 161W1301-1, 161W1301-3, 161W1301-5, and
161W1301-7: use CMM 32-11-03, "Repair 16-2" Temporary Revision 32-7004, dated
March 01, 2015 or later Boeing approved revisions that are published on MyBoeingFleet.
(2) Aft trunnion pin 161W1301-9: use CMM 32-11-65, "Repair 3-2" Temporary Revision
32-7005, dated March 01, 2015 or later Boeing approved revisions that are published on
MyBoeingFleet.
2. Replacement of Installed Aft Trunnion Pins:
a. RC - Replace the aft trunnion pin with a new or serviceable aft trunnion pin in accordance
with the applicable figure below:
(1) Group 1:
– Left side: Use FIGURE 3.
– Right side: Use FIGURE 4.
(2) Group 2:
– Left side: Use FIGURE 5.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
30 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 31

– Right side: Use FIGURE 6.
NOTE: Aft trunnion pins with serial numbers that begin with "EGL" and "MAL" are serviceable if
inspected, confirmed to be free of heat damage and cracks, and permanently marked
"BASE METAL INSPECTED" in accordance with CMM 32-11-03, "Repair 16-2" Temporary
Revision 32-7004, dated March 01, 2015 or later Boeing approved revisions that are
published on MyBoeingFleet; or in accordance with CMM 32-11-65, "Repair 3-2"
Temporary Revision 32-7005, dated March 01, 2015 or later Boeing approved revisions
that are published on MyBoeingFleet.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1: December 10, 2015
31 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 32 (OCR)

BOEING SERVICE BULLETIN 777-32A0103
ALERT  ALERT
C (Đ)0E
MAIN LANDING GEAR
2421622
FIGURE 1: LEFT MAIN LANDING GEAR AFT TRUNNION PIN - DETAILED INSPECTION
(SHEET 1 OF 2)
Original Issue: September 11, 2015
Revision 1 December 10, 2015  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-32A0103
Work - See page 1 for details.  32 of 51

### Page 33

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a) (b)1161W1301-9  (161W0004-3, 161W1301-
1, 161W1301-3, 161W1301-5, 161W1301-
7 optional)
Aft Trunnion Pin
Assembly
Inspect1
(a) Do a Detailed Inspection to determine if the aft trunnion pin serial number begins with "EGL" or "MAL"
and if the aft trunnion pin is permanently marked, "BASE METAL INSPECTED".
(b) The serial number is located on the aft end of the aft trunnion pin.
FIGURE 1: LEFT MAIN LANDING GEAR AFT TRUNNION PIN - DETAILED INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1 December 10, 2015
33 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 34 (OCR)

BOEING SERVICE BULLETIN 777-32A0103
ALERT  ALERT
LAVO
FWD
MAIN LANDING GEAR
2421623
FIGURE 2: RIGHT MAIN LANDING GEAR AFT TRUNNION PIN - DETAILED INSPECTION
(SHEET 1 OF 2)
Original Issue: September 11, 2015
Revision 1 December 10, 2015  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-32A0103
Work - See page 1 for details.  34 of 51

### Page 35

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a) (b)1161W1301-9  (161W0004-3, 161W1301-
1, 161W1301-3, 161W1301-5, 161W1301-
7 optional)
Aft Trunnion Pin
Assembly
Inspect1
(a) Do a Detailed Inspection to determine if the aft trunnion pin serial number begins with "EGL" or "MAL"
and if the aft trunnion pin is permanently marked, "BASE METAL INSPECTED".
(b) The serial number is located on the aft end of the aft trunnion pin.
FIGURE 2: RIGHT MAIN LANDING GEAR AFT TRUNNION PIN - DETAILED INSPECTION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1 December 10, 2015
35 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 36 (OCR)

BOEING SERVICE BULLETIN 777-32A0103
ALERT  ALERT
This Figure applies only to: Group 1.
000
MAIN LANDING GEAR
2421627
FIGURE 3: LEFT MAIN LANDING GEAR AFT TRUNNION PIN - REPLACEMENT
(SHEET 1 OF 3)
Original Issue: September 11, 2015
Revision 1 December 10, 2015  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-32A0103
Work - See page 1 for details.  36 of 51

### Page 37

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a) (b)1161W1301-7
(161W0004-3,
161W1301-1,
161W1301-3,
161W1301-5 optional)
Aft Trunnion Pin AssemblyRemove1
(a) (c) (d)1161W1301-7
(161W1301-9 optional)
Aft Trunnion Pin AssemblyInstall (New)2
FIGURE 3: LEFT MAIN LANDING GEAR AFT TRUNNION PIN - REPLACEMENT
(SHEET 2 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1 December 10, 2015
37 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 38

More DataQtyIdentificationNameTaskStep
(a) Refer to 777 AMM 32-11-01 as an accepted procedure.
(b) A removed aft trunnion pin may be made serviceable. Repair, inspect, and permanently mark the removed
aft trunnion pin assembly in accordance with CMM 32-11-03, "Repair 16-2" Temporary Revision 32-7004,
dated March 01, 2015 or later Boeing approved revisions that are published on MyBoeingFleet.
(c) A serviceable aft trunnion pin can be installed as an option to a new aft trunnion pin. Aft trunnion pins with
serial numbers that do not begin with "EGL" or "MAL" are serviceable. Aft trunnion pins with serial numbers
that begin with "EGL" and "MAL" are serviceable if inspected, confirmed to be free of heat damage and
cracks, and permanently marked, "BASE METAL INSPECTED" in accordance with CMM 32-11-03, "Repair
16-2" Temporary Revision 32-7004, dated March 01, 2015 or later Boeing approved revisions that are
published on MyBoeingFleet.
(d) Other part numbers may be installed. Refer to APPENDIX B.
FIGURE 3: LEFT MAIN LANDING GEAR AFT TRUNNION PIN - REPLACEMENT
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1 December 10, 2015
38 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 39 (OCR)

BOEING SERVICE BULLETIN 777-32A0103
ALERT  ALERT
This Figure applies only to: Group 1.
006 3
MAIN LANDING GEAR
2421628
FIGURE 4: RIGHT MAIN LANDING GEAR AFT TRUNNION PIN - REPLACEMENT
(SHEET 1 OF 3)
Original Issue: September 11, 2015
Revision 1 December 10, 2015  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-32A0103
Work - See page 1 for details.  39 of 51

### Page 40

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a) (b)1161W1301-7
(161W0004-3,
161W1301-1,
161W1301-3,
161W1301-5 optional)
Aft Trunnion Pin AssemblyRemove1
(a) (c) (d)1161W1301-7
(161W1301-9 optional)
Aft Trunnion Pin AssemblyInstall (New)2
(a) Refer to 777 AMM 32-11-01 as an accepted procedure.
FIGURE 4: RIGHT MAIN LANDING GEAR AFT TRUNNION PIN - REPLACEMENT
(SHEET 2 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1 December 10, 2015
40 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 41

More DataQtyIdentificationNameTaskStep
(b) A removed aft trunnion pin may be made serviceable. Repair, inspect, and permanently mark the removed
aft trunnion pin assembly in accordance with CMM 32-11-03, "Repair 16-2" Temporary Revision 32-7004,
dated March 01, 2015 or later Boeing approved revisions that are published on MyBoeingFleet.
(c) A serviceable aft trunnion pin can be installed as an option to a new aft trunnion pin. Aft trunnion pins with
serial numbers that do not begin with "EGL" or "MAL" are serviceable. Aft trunnion pins with serial numbers
that begin with "EGL" and "MAL" are serviceable if inspected, confirmed to be free of heat damage and
cracks, and permanently marked, "BASE METAL INSPECTED" in accordance with CMM 32-11-03, "Repair
16-2" Temporary Revision 32-7004, dated March 01, 2015 or later Boeing approved revisions that are
published on MyBoeingFleet.
(d) Other part numbers may be installed. Refer to APPENDIX B.
FIGURE 4: RIGHT MAIN LANDING GEAR AFT TRUNNION PIN - REPLACEMENT
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1 December 10, 2015
41 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 42 (OCR)

BOEING SERVICE BULLETIN 777-32A0103
ALERT  ALERT
This Figure applies only to: Group 2.
MAIN LANDING GEAR
2426457
FIGURE 5: LEFT MAIN LANDING GEAR AFT TRUNNION PIN - REPLACEMENT
(SHEET 1 OF 3)
Original Issue: September 11, 2015
Revision 1 December 10, 2015  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-32A0103
Work - See page 1 for details.  42 of 51

### Page 43

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a) (b)1161W1301-9Aft Trunnion Pin AssemblyRemove1
(a) (c)1161W1301-9Aft Trunnion Pin AssemblyInstall (New)2
(a) Refer to 777 AMM 32-11-01 as an accepted procedure.
(b) A removed aft trunnion pin may be made serviceable. Repair, inspect, and permanently mark the removed
aft trunnion pin assembly in accordance with CMM 32-11-65, "Repair 3-2" Temporary Revision 32-7005,
dated March 01, 2015 or later Boeing approved revisions that are published on MyBoeingFleet.
FIGURE 5: LEFT MAIN LANDING GEAR AFT TRUNNION PIN - REPLACEMENT
(SHEET 2 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1 December 10, 2015
43 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 44

More DataQtyIdentificationNameTaskStep
(c) A serviceable aft trunnion pin can be installed as an option to a new aft trunnion pin. Aft trunnion pins with
serial numbers that do not begin with "EGL" or "MAL" are serviceable. Aft trunnion pins with serial numbers
that begin with "EGL" and "MAL" are serviceable if inspected, confirmed to be free of heat damage and
cracks, and permanently marked, "BASE METAL INSPECTED" in accordance with CMM 32-11-65, "Repair
3-2" Temporary Revision 32-7005, dated March 01, 2015 or later Boeing approved revisions that are
published on MyBoeingFleet.
FIGURE 5: LEFT MAIN LANDING GEAR AFT TRUNNION PIN - REPLACEMENT
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1 December 10, 2015
44 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 45 (OCR)

BOEING SERVICE BULLETIN 777-32A0103
ALERT  ALERT
This Figure applies only to: Group 2.
006 3
MAIN LANDING GEAR
2426456
FIGURE 6: RIGHT MAIN LANDING GEAR AFT TRUNNION PIN - REPLACEMENT
(SHEET 1 OF 3)
Original Issue: September 11, 2015
Revision 1 December 10, 2015  Export Controlled ECCN: 9E991 - BOEING  777-32A0103
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  45 of 51

### Page 46

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a) (b)1161W1301-9Aft Trunnion Pin AssemblyRemove1
(a) (c)1161W1301-9Aft Trunnion Pin AssemblyInstall (New)2
(a) Refer to 777 AMM 32-11-01 as an accepted procedure.
(b) A removed aft trunnion pin may be made serviceable. Repair, inspect, and permanently mark the removed
aft trunnion pin assembly in accordance with CMM 32-11-65, "Repair 3-2" Temporary Revision 32-7005,
dated March 01, 2015 or later Boeing approved revisions that are published on MyBoeingFleet.
FIGURE 6: RIGHT MAIN LANDING GEAR AFT TRUNNION PIN - REPLACEMENT
(SHEET 2 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1 December 10, 2015
46 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 47

More DataQtyIdentificationNameTaskStep
(c) A serviceable aft trunnion pin can be installed as an option to a new aft trunnion pin. Aft trunnion pins with
serial numbers that do not begin with "EGL" or "MAL" are serviceable. Aft trunnion pins with serial numbers
that begin with "EGL" and "MAL" are serviceable if inspected, confirmed to be free of heat damage and
cracks, and permanently marked, "BASE METAL INSPECTED" in accordance with CMM 32-11-65, "Repair
3-2" Temporary Revision 32-7005, dated March 01, 2015 or later Boeing approved revisions that are
published on MyBoeingFleet.
FIGURE 6: RIGHT MAIN LANDING GEAR AFT TRUNNION PIN - REPLACEMENT
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1 December 10, 2015
47 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 48

Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
APPENDIX A: LOGIC DIAGRAM
(SHEET 1 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1 December 10, 2015
48 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 49

1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
AFT TRUNNION PIN IDENTIFICATIONPART 1
AFT TRUNNION PIN REPLACEMENTPART 2
AFT TRUNNION PIN SERIAL NUMBER BEGINNING WITH "EGL" OR "MAL"
FOUND AND AFT TRUNNION PIN IS NOT PERMANENTLY MARKED,
"BASE METAL INSPECTED".
CONDITION 1
AFT TRUNNION PIN SERIAL NUMBER BEGINNING WITH "EGL" OR "MAL"
FOUND AND AFT TRUNNION PIN IS FOUND PERMANENTLY MARKED,
"BASE METAL INSPECTED".
CONDITION 2
NO AFT TRUNNION PIN SERIAL NUMBER BEGINNING WITH "EGL" OR
"MAL" FOUND.
CONDITION 3
NOTE: Boeing Multi-Operator Message (MOM) MOM-MOM-15-0303-01B is related to this service bulletin.
Operators that have identified the serial number in order to respond to the questions asked in this MOM do
not need to do PART 1 of the work instructions.
APPENDIX A: LOGIC DIAGRAM
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1 December 10, 2015
49 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 50

Acceptable Aft Trunnion Pin AssembliesMaximum Taxi
Gross Weight
(Reference Only)
Airplane Minor
Model (Boeing
Designation)
Airplane Minor Model
(Type Certificate Data
Sheet)
161W0004-3, 161W1301-1, 161W1301-3,
161W1301-5, 161W1301-7, 161W1301-9
547,000 lbs777-200777-200
161W0004-3, 161W1301-3, 161W1301-5,
161W1301-7, 161W1301-9
652,000 lbs777-200ER
161W1301-7, 161W1301-9658,000 lbs777-200ER/IGW
161W1301-9768,800 lbs777-200LR777-200LR
161W1301-7, 161W1301-9662,000 lbs777-300777-300
161W1301-9777,000 lbs777-300ER777-300ER
161W1301-9768,800 lbs777F777F
APPENDIX B:  ACCEPTABLE AFT TRUNNION PIN ASSEMBLY PART NUMBERS
(SHEET 1 OF 1)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: September 11, 2015
777-32A0103Revision 1 December 10, 2015
50 of 51
BOEING SERVICE BULLETIN 777-32A0103
ALERTALERT

### Page 51 (OCR)

BOEING SERVICE BULLETIN 777-32A0103
ALERT  ALERT
Boeing Part Demand Intent
After review of this service bulletin, Boeing asks that the primary engineer fill out this survey to help Boeing
predict the quantity and timing of the Boeing supplied kits.
Airline:
Contact Name:
Date:
Contact E-mail:
- Yes  • No Have/will you recommend to your airline to accomplish this service bulletin?
- Yes  • No Would issuance of an AD change this decision?
When would you likely be starting this SB incorporation? Month/ Year_
How many airplanes per month do you plan to accomplish? Airplane/Month
How many total airplanes do you plan to complete? Total Airplanes
For inspection Service Bulletins, are you planning to replace on condition, or a fleet campaign to replace on
all airplanes regardless of condition?
-On Condition  - Campaign
If you are not incorporating this Service Bulletin at this time will you please help us understand the reason(s)
why? Your input will help us provide better customer support.
L Cost Prohibitive  - Continue Inspections  Other
Operator Comments:
Within 45 days of the SB issue, or as soon after as possible, please scan this form and send to:
sbsolutions@boeing.com
Disclaimer: The data provided in this survey will be used for planning purposes only and does not
constitute a commitment on any part of the airlines to purchase the parts in question, nor does it constitute  2326214
a commitment on the part of Boeing to deliver the parts in question. This survey is a projection to help
Boeing forecast demand levels and timing to better support the customers schedule.
APPENDIX C: PART DEMAND INTENT SURVEY
(SHEET 1 OF 1)
Original Issue: September 11, 2015
Revision 1 December 10, 2015  Export Controlled ECCN: 9E991 - BOEING  777-32A0103
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  51 of 51

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
