# Boeing Alert Service Bulletin 777-53A0052: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2015-3146; AD 2016-04-17 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 777-53A0052](https://openairdocs.org/service-documents/boeing/777-53a0052.md)
- Title as filed: U.S. DOT/FAA - SB-777-53A0052-00
- Pages: 113
- PDF: https://openairdocs.org/files/sha256/69/42/6942718c64a103c9c6b3112a7e496638a907023e4600cdbe1fb240a816a70957
- Page: https://openairdocs.org/service-documents/boeing/777-53a0052/file/6942718c64a1

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
777
Service Bulletin
ALERT
Number: 777-53A0052
Original Issue: October 10, 2014
ATA System: 5335 5345
SUBJECT: FUSELAGE - Skin Panels - Stringer S-14 Lap Splice Modification in Section 43 and
Section 44
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2014 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: October 10, 2014
777-53A0052
1 of 113
5.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
2 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A. Effectivity ................................................ 9
1. Airplanes ............................................. 9
2. Spares Affected ........................................ 1 0
B. Concurrent Requirements ...................................... 1 0
C. Reason ................................................ 1 1
D. Description .............................................. 1 2
E. Compliance .............................................. 1 2
F. Approval ............................................... 1 7
G. Manpower .............................................. 1 8
H. Weight and Balance Changes .................................... 1 9
I. Electrical Load Data ......................................... 1 9
J. References .............................................. 1 9
1. Existing Data: ......................................... 1 9
2. Data Supplied with this Service Bulletin: ........................... 2 0
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 2 4
K. Publications Affected ........................................ 2 4
L. Interchangeability and Intermixability of Parts ........................... 2 4
M. Software Accomplishment Summary ................................ 2 4
2. MATERIAL INFORMATION ........................................ 2 5
A. Material - Price and Availability ................................... 2 5
B. Industry Support Information .................................... 2 5
C. Parts Necessary for Each Airplane ................................. 2 5
1. Kits/Parts ............................................ 2 5
2. Parts and Materials Supplied by the Operator ........................ 2 5
3. Parts Modified and Reidentified ................................ 2 6
4. Parts Removed and Not Replaced .............................. 2 6
D. Parts Necessary to Change Spares ................................. 2 6
E. Special Tooling - Price and Availability ............................... 2 6
F. Special Tooling Necessary to do this Service Bulletin ....................... 2 6
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 7
A. GENERAL INFORMATION ..................................... 2 7
B. WORK INSTRUCTIONS ....................................... 2 8
FIGURE 1: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE [Group 1] ........... 3 4
FIGURE 2: LAP SPLICE MODIFICATION - SECTION 43 - RIGHT SIDE [Group 1] ........... 4 1
FIGURE 3: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE [Group 2] ........... 4 8
FIGURE 4: LAP SPLICE MODIFICATION - SECTION 43 - RIGHT SIDE [Group 2] ........... 5 5
FIGURE 5: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE [Group 3] ........... 6 2
FIGURE 6: LAP SPLICE MODIFICATION - SECTION 43 - RIGHT SIDE [Group 3] ........... 6 9
FIGURE 7: LAP SPLICE MODIFICATION - SECTION 44 - LEFT SIDE [Group 1-2] .......... 7 6
FIGURE 8: LAP SPLICE MODIFICATION - SECTION 44 - RIGHT SIDE [Group 1-2] ......... 8 3
FIGURE 9: LAP SPLICE MODIFICATION - SECTION 44 - LEFT SIDE [Group 3] ........... 9 0
FIGURE 10: LAP SPLICE MODIFICATION - SECTION 44 - RIGHT SIDE [Group 3] ........... 9 7
FIGURE 11: PHASED ARRAY ULTRASONIC LAP SPLICE INSPECTION ............... 1 0 4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
3 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 4

FIGURE 12: POST-MODIFICATION INSPECTION ............................ 1 0 8
FIGURE 13: LIFT AND SUPPORT AIRPLANE .............................. 1 1 1
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
4 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 5

Commercial 
Airplanes
777
Service Bulletin
ALERT
SummaryNumber: 777-53A0052Original Issue: October 10, 2014
ATA System: 5335 5345
SUBJECT: FUSELAGE - Skin Panels - Stringer S-14 Lap Splice Modification in Section 43 and
Section 44
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
This service bulletin gives instruction for a modification to the skin lap splices at stringers S-14L/R (left and right
side) in fuselage Sections 43 and 44. Widespread Fatigue Damage (WFD) can develop in the skin at locations
where scribe lines were made during assembly of the lap splices in production. If the modification given in this
service bulletin is not accomplished, WFD in the skin lap splices can cause a sudden decompression and loss
of structural integrity.
On affected airplanes, scribe lines may have inadvertently been made in the lower/overlapped skin of the lap
splices by a tool used to remove maskant from the clad aluminum skin during assembly of the affected lap
splices. During the 777 fatigue test, skin cracks were found at the stringer S-14 lap splice and these cracks
initiated at scribe lines that were made inadvertently in production when maskant was removed from the skin
panels. In November, 2011, Service Bulletin 777-53A0043 was issued to give inspections for the lap splices at
stringers S-14L/R and other lap splices where scribe lines may have been made during production.
Due to the possibility of WFD in the skin lap splices it has been determined that inspections in accordance with
Service Bulletin 777-53A0043 will not be sufficient at stringers S-14L/R in fuselage Sections 43 and 44 to ensure
continued safe operation beyond 45,000 flight cycles. Therefore, modification in accordance with this service
bulletin will be necessary to operate to the limit of validity (LOV).
Boeing Fleet Team Digest (FTD) 777 FTD 53-02004 is related to this service bulletin.
Boeing Service Related Problem (SRP) 777-SRP-53-0165 is related to this service bulletin.
The skin lap splices affected by this service bulletin have been determined to be structure that is susceptible to
Widespread Fatigue Damage (WFD).
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
5 of 113

### Page 6

ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNo.Spares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
Yes.AD Related
Paragraph 1.H., Weight and Balance ChangesYes.Weight and Balance Change
Paragraph 1.I., Electrical Load DataNo.Electrical Load Changed
Paragraph 1.K., Publications AffectedNo.Publications Affected
Paragraph 1.K., Publications AffectedNo.Airplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNo.Kits Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
Yes.Operator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
No.Special Tooling Required
ACTION (PRR 62777-56RS)
An external phased-array ultrasonic inspection for skin cracks is to be accomplished at the left and right side
stringer S-14 lap joints over fuselage Sections 43 and 44 before modification parts are installed. Also, if these
lap joints have not been inspected for scribe lines in accordance with service bulletin 777-53A0054, a detailed
inspection for scribe lines in the lower/overlapped skin of these lap splices is to be accomplished. The airplane
is to be lifted/supported in accordance with this service bulletin and an open hole HFEC inspection for skin
cracks is to be done at the upper and lower fastener rows of these lap splices (where fasteners must be removed
to accomplish the modification). If no crack is found and no scribe line deeper than a specified limit is found, the
lap splice modification is to be accomplished in accordance with this service bulletin. If any crack is found or
any scribe line deeper than the specified limit is found, supplemental instruction for the modification given in this
service bulletin is to be obtained from Boeing and the modification is to be accomplished in accordance with
this service bulletin and the supplemental instruction from Boeing. Also, if there is an existing repair within 7
inches of a modification doubler or filler that is to be installed in accordance with this service bulletin, supplemental
instruction is to be obtained from Boeing and the modification is to be accomplished in accordance with this
service bulletin and the supplemental instruction from Boeing.
After accomplishment of the modification, internal surface HFEC post-modification inspections for cracks in the
modified lap splices are to be done in accordance with this service bulletin. If any crack is found with these
inspections, special repair instruction is to be obtained from Boeing and a repair is to be accomplished in
accordance with the instruction from Boeing.
EFFECTIVITY
777-200 Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.
COMPLIANCE
Federal Aviation Administration (FAA) Airworthiness Directive AD 2012-14-03 is related to this service bulletin.
The effective date of AD 2012-14-03 is August 27, 2012.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
6 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 7 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of October 25, 2001. Please refer to
Paragraph 2.B., Industry Support Information. The warranty remedies will expire eight years from the original
issue date of this service bulletin.
MANPOWER
Airplanes  Total Task Hours  Elapsed Hours
All  2683.00  240.15
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability.
MODIFY THE LEFT AND RIGHT SIDE LAP SPLICES AT
STRINGER S-14 IN FUSELAGE SECTIONS 43 AND 44.
ACCOMPLISH THE MODIFICATION WITHIN THE RANGE
OF FLIGHT-CYCLES SPECIFIED IN THIS SERVICE BULLETIN.
AFTER THE MODIFICATION IS ACCOMPLISHED, DO
POST-MODIFICATION INSPECTIONS AT THE TIMES
SPECIFIED IN THIS SERVICE BULLETIN.
GODD  GODD  2330841
Original Issue: October 10, 2014
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-53A0052
Work - See page 1 for details.  7 of 113

### Page 8

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
8 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
777
Service Bulletin
ALERT
Number: 777-53A0052
Original Issue: October 10, 2014
ATA System: 5335 5345
SUBJECT: FUSELAGE - Skin Panels - Stringer S-14 Lap Splice Modification in Section 43 and
Section 44
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is applicable to 777-200 airplanes line number 1-75 in three Groups. The
Variable Numbers and Group Information for the applicable airplanes is given below. An equivalent
change is on subsequent production airplanes. Refer to PRR 62777-56RS for data about this
change.
Refer to Service Bulletin Index D624W001 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP
777-200 airplanes, line numbers 1-40. These airplanes have a
separate Group due to minor differences in the lap joint modification.
-1
777-200 airplanes, line numbers 41-74. These airplanes have a
separate Group due to minor differences in the lap joint modification.
-2
777-200 line number 75. This airplane has a separate Group due to
minor differences in the lap joint modification.
-3
Airplane Models:
777-200
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
9 of 113

### Page 10

GroupVariable Number
1WA001 - WA017
1WA076 - WA080
1WA086 - WA087
2WA088 - WA089
1WA101 - WA104
1WA116 - WA117
2WA118 - WA119
1WA131 - WA135
2WA136
1WA171 - WA173
2WA174 - WA175
1WA196 - WA197
2WA198
2WA206
3WA221
2WB001 - WB008
2WB051 - WB056
2WB101 - WB103
2WB121 - WB122
2WB131 - WB132
2WB151
2WB161 - WB162
2WB181
2. Spares Affected
None.
B. Concurrent Requirements
This service bulletin includes instruction to do work in accordance with the service bulletin identified in
the table below before parts are installed for the modification given in this service bulletin.
DescriptionService BulletinCompany
External inspection of the fuselage skin for
external scribe lines
777-53A0054, Revision 1 (a) (b)Boeing
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
10 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 11

DescriptionService BulletinCompany
(a) Service bulletin 777-53A0054, Revision 1 includes an inspection for scribe lines and inspection for skin
cracks if any scribe lines are found. Inspection in accordance with service bulletin 777-53A0054, Revision
1 is to be accomplished at the stringer S-14 lap splice between fuselage STA 655 and STA 1434 on both
sides of the airplane. This concurrent requirement does not apply to other areas of the fuselage affected
by the identified service bulletin. Inspection in accordance with service bulletin 777-53A0054, Revision 1
is not necessary if the conditions for inspection given in that service bulletin do not apply at the stringer
S-14 lap splice between fuselage STA 655 and STA 1434 for the airplane to be modified in accordance
with this service bulletin.
(b) If the conditions for inspection given in the Original Issue of service bulletin 777-53A0054 did apply and
the stringer S-14 lap splice between fuselage STA 655 and STA 1434 was actually inspected in accordance
with the Original Issue of service bulletin 777-53A0054, this previous inspection in accordance with the
Original Issue of service bulletin 777-53A0054 is a satisfactory alternative to the identified concurrent re-
quirement. If the inspection of the stringer S-14 lap splice between fuselage STA 655 and STA 1434 was
determined to be unnecessary in accordance with the Original Issue of service bulletin 777-53A0054, then
service bulletin 777-53A0054, Revision 1 must be done before or at the same time as this service bulletin.
Also, this service bulletin instructs that an inspection for skin cracks must be accomplished in accordance
with service bulletin 777-53A0054, Revision 1 at the same time as the work given in this service bulletin
if any scribe line 0.001 inch or deeper was found with a previous inspection accomplished in accordance
with service bulletin 777-53A0054, Original Issue or Revision 1.
C. Reason
This service bulletin gives instruction for a modification to the skin lap splices at stringers S-14L/R (left
and right side) in fuselage Sections 43 and 44. Widespread Fatigue Damage (WFD) can develop in
the skin at locations where scribe lines were made during assembly of the lap splices in production. If
the modification given in this service bulletin is not accomplished, WFD in the skin lap splices can cause
a sudden decompression and loss of structural integrity.
On affected airplanes, scribe lines may have inadvertently been made in the lower/overlapped skin of
the lap splices by a tool used to remove maskant from the clad aluminum skin during assembly of the
affected lap splices. During the 777 fatigue test, skin cracks were found at the stringer S-14 lap splice
and these cracks initiated at scribe lines that were made inadvertently in production when maskant
was removed from the skin panels. In November, 2011, Service Bulletin 777-53A0043 was issued to
give inspections for the lap splices at stringers S-14L/R and other lap splices where scribe lines may
have been made during production.
Due to the possibility of WFD in the skin lap splices it has been determined that inspections in accordance
with Service Bulletin 777-53A0043 will not be sufficient at stringers S-14L/R in fuselage Sections 43
and 44 to ensure continued safe operation beyond 45,000 flight cycles. Therefore, modification in
accordance with this service bulletin will be necessary to operate to the limit of validity (LOV).
Boeing Fleet Team Digest (FTD) 777 FTD 53-02004 is related to this service bulletin.
Boeing Service Related Problem (SRP) 777-SRP-53-0165 is related to this service bulletin.
The skin lap splices affected by this service bulletin have been determined to be structure that is
susceptible to Widespread Fatigue Damage (WFD).
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
11 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 12

D. Description
An external phased-array ultrasonic inspection for skin cracks is to be accomplished at the left and
right side stringer S-14 lap joints over fuselage Sections 43 and 44 before modification parts are
installed. Also, if these lap joints have not been inspected for scribe lines in accordance with service
bulletin 777-53A0054, a detailed inspection for scribe lines in the lower/overlapped skin of these lap
splices is to be accomplished. The airplane is to be lifted/supported in accordance with this service
bulletin and an open hole HFEC inspection for skin cracks is to be done at the upper and lower fastener
rows of these lap splices (where fasteners must be removed to accomplish the modification). If no
crack is found and no scribe line deeper than a specified limit is found, the lap splice modification is to
be accomplished in accordance with this service bulletin. If any crack is found or any scribe line deeper
than the specified limit is found, supplemental instruction for the modification given in this service
bulletin is to be obtained from Boeing and the modification is to be accomplished in accordance with
this service bulletin and the supplemental instruction from Boeing. Also, if there is an existing repair
within 7 inches of a modification doubler or filler that is to be installed in accordance with this service
bulletin, supplemental instruction is to be obtained from Boeing and the modification is to be
accomplished in accordance with this service bulletin and the supplemental instruction from Boeing.
After accomplishment of the modification, internal surface HFEC post-modification inspections for
cracks in the modified lap splices are to be done in accordance with this service bulletin. If any crack
is found with these inspections, special repair instruction is to be obtained from Boeing and a repair is
to be accomplished in accordance with the instruction from Boeing.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
231, 233, 241, 243777-200
E. Compliance
Federal Aviation Administration (FAA) Airworthiness Directive AD 2012-14-03 is related to this service
bulletin. The effective date of AD 2012-14-03 is August 27, 2012.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive
related to this service bulletin. The Airworthiness Directive will make the compliance tasks and times
given in this service bulletin mandatory.
The modification and post-modification inspection instruction in this service bulletin applies to airplanes
that have 30,000 or more total flight cycles when the modification is accomplished. Accomplishment
of the S-14 lap splice modification before 30,000 flight cycles would result in a need to replace skin
panels adjacent to the modification within 30,000 flight cycles after the modification and possibly other
additional work that is not given in this service bulletin.
The conditions and associated actions given in the Compliance tables below can be different on the
left and right sides of the airplane. The modification given in this service bulletin is to be accomplished
on both sides of the airplane.
Identify the applicable compliance tables from Compliance Table 1. Do the required actions in accordance
with Paragraph 3. Accomplishment Instructions.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
12 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 13

TABLE 1: Compliance Table Applicability
Applicable Compliance Ta-
bles
Airplanes
TABLES 1, 2, 4, 5Airplane previously inspected at the stringer S-14 lap splice between fuselage
STA 655 and STA 1434 in accordance with service bulletin 777-53A0054. (a)
TABLES 1, 3, 4, 5Airplane NOT previously inspected at the stringer S-14 lap splice between
fuselage STA 655 and STA 1434 in accordance with service bulletin 777-
53A0054. (b)
(a) The airplane has actually been inspected for scribe lines in accordance with the Original Issue or Revision
1 of service bulletin 777-53A0054, or it was previously determined, in accordance with service bulletin
777-53A0054, Revision 1, that inspection for scribe lines is not necessary at the stringer S-14 lap splice
between fuselage STA 655 and STA 1434. It is not sufficient if the inspection for scribe lines was previously
determined to be unnecessary in accordance with only the Original Issue of service bulletin 777-53A0054.
(b) Also included are airplanes for which the inspection of the stringer S-14 lap splice for scribe lines between
fuselage STA 655 and STA 1434 was previously determined to be unnecessary in accordance with only
the Original Issue of service bulletin 777-53A0054.
Table 2: Inspection of Modification Area For Cracks
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,000
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 45,000
total flight cy-
cles, but no ear-
lier than 30,000
total flight cy-
cles. (f)
Do PART 1: INSPEC-
TION 'A' OF MODIFICA-
TION AREA FOR
CRACKS. (b)
Airplane previously inspect-
ed at the stringer S-14 lap
splice between fuselage
STA 655 and STA 1434 in
accordance with service
bulletin 777-53A0054, and
the skin panels in this area
of the lap splice do NOT
have a scribe line that is
0.001 inch or deeper. (a)
-Within 1,000
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 45,000
total flight cy-
cles, but no ear-
lier than 30,000
total flight cy-
cles. (f)
Do PART 2: INSPEC-
TION 'B' OF MODIFICA-
TION AREA FOR
CRACKS. (c)
Airplane previously inspect-
ed at the stringer S-14 lap
splice between fuselage
STA 655 and STA 1434 in
accordance with service
bulletin 777-53A0054, and
any skin panel in this area
of the lap splice has a
scribe line that is 0.001
inch or deeper.
--After doing PART 1 or
PART 2, see Compliance
Table 4 for required ac-
tions and compliance
times.
CONDITION 1: NO SUP-
PLEMENTAL INSTRUC-
TION NEEDED. (d)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
13 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 14

Table 2: Inspection of Modification Area For Cracks
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.Do PART 4: SUPPLE-
MENTAL INSTRUCTION
CONDITION 2: SUPPLE-
MENTAL INSTRUCTION
NEEDED. (e) --After doing PART 4, do
next action in accordance
with Compliance Table 4.
(a) Inspection in accordance with service bulletin 777-53A0054 includes an inspection for scribe lines and
inspection for skin cracks if any scribe line is found.
This condition also applies to airplanes for which it was previously determined, in accordance with service
bulletin 777-53A0054, Revision 1, that inspection for scribe lines is not necessary at the stringer S-14
lap splice between fuselage STA 655 and STA 1434. It is not sufficient if the inspection for scribe lines
was previously determined to be unnecessary in accordance with only the Original Issue of service bulletin
777-53A0054.
(b) PART 1: INSPECTION 'A' OF MODIFICATION AREA FOR CRACKS includes an external phased-array
ultrasonic inspection for skin cracks and an open hole HFEC inspection for skin cracks at the stringer S-
14 lap splice between fuselage STA 655 and STA 1434.
(c) PART 2: INSPECTION 'B' OF MODIFICATION AREA FOR CRACKS includes the following inspections:
– Inspection of any skin panel that has a scribe line 0.001 inch or deeper for cracks in accordance
with service bulletin 777-53A0054, Revision 1.
The inspection procedure specified in service bulletin 777-53A0054 depends on the distance between
the scribe line and the lower edge of the upper/overlapping skin panel. The inspection for cracks will
be a Detailed inspection plus either an ultrasonic or a surface HFEC inspection depending on the
location of the scribe line(s).
– An external phased-array ultrasonic inspection for skin cracks and an open hole HFEC inspection
for skin cracks at the stringer S-14 lap splice between fuselage STA 655 and STA 1434 in accordance
with PART 1.
(d) CONDITION 1: NO SUPPLEMENTAL INSTRUCTION NEEDED is applicable if ALL the following apply
at the stringer S-14 lap splice between fuselage STA 655 and STA 1434:
– No crack found with the phased array ultrasonic inspection or the open hole HFEC inspection.
– No scribe line is more than 0.006 inch deep and any skin panel that has a scribe line has been in-
spected for cracks in accordance with service bulletin 777-53A0054, Revision 1 and found to be
crack-free.
– No scribe line 0.001 inch or deeper located in a doubler edge zone. A doubler edge zone is an area
of the lower/overlapped skin where a vertical cross-section through the post-modification lap joint
will include a filler installed in accordance with this service bulletin, but not a doubler. These zones
are located at discontinuities in the modification where the doubler ends but the filler extends forward
or aft past the edge of the doubler. The location of these zones can be seen on the modification
drawings supplied with this service bulletin.
– No existing repair within 7 inches of where the modification parts will be installed.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
14 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 15

Table 2: Inspection of Modification Area For Cracks
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
(e) CONDITION 2: SUPPLEMENTAL INSTRUCTION NEEDED is applicable if ANY of the following apply
at the stringer S-14 lap splice between fuselage STA 655 and STA 1434:
– Any crack is found.
– There is a scribe line more than 0.006 inch deep.
– There is a scribe line 0.001 inch or deeper located in a doubler edge zone. A doubler edge zone is
an area of the lower/overlapped skin where a vertical cross-section through the post-modification
lap joint will include a filler installed in accordance with this service bulletin, but not a doubler. These
zones are located at discontinuities in the modification where the doubler ends but the filler extends
forward or aft past the edge of the doubler. The location of these zones can be seen on the modifi-
cation drawings supplied with this service bulletin.
– There is an existing repair within 7 inches of where the modification parts will be installed.
(f) The modification and post-modification inspection instruction in this service bulletin applies to airplanes
that have 30,000 or more total flight cycles when the modification is accomplished. Accomplishment of
the S-14 lap splice modification before 30,000 flight cycles would result in a need to replace skin panels
adjacent to the modification within 30,000 flight cycles after the modification and possibly other additional
work that is not given in this service bulletin.
Table 3: Inspection of Modification Area For Scribe Lines and Cracks
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,000
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 45,000
total flight cy-
cles, but no ear-
lier than 30,000
total flight cy-
cles. (e)
Do PART 3: INSPEC-
TION 'C' OF MODIFICA-
TION AREA FOR
SCRIBE LINES AND
CRACKS. (b)
Airplane NOT previously
inspected for scribe lines
at the stringer S-14 lap
splice between fuselage
STA 655 and STA 1434 in
accordance with service
bulletin 777-53A0054. (a)
-Before further flight.Get next action from
Compliance Table 4.
CONDITION 1: NO SUP-
PLEMENTAL INSTRUC-
TION NEEDED. (c)
-Before further flight.Do PART 4: SUPPLE-
MENTAL INSTRUCTION
CONDITION 2: SUPPLE-
MENTAL INSTRUCTION
NEEDED. (d) -Before further flight.After doing PART 4, get
next action from Compli-
ance Table 4.
(a) This condition also applies to airplanes for which it was previously determined, in accordance with only
the Original Issue of service bulletin 777-53A0054, that inspection for scribe lines is not necessary at the
stringer S-14 lap splice between fuselage STA 655 and STA 1434. This condition does not apply if in-
spection for scribe lines at the stringer S-14 lap splice between fuselage STA 655 and STA 1434 was
previously determined to be unnecessary in accordance with Revision 1 of service bulletin 777-53A0054.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
15 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 16

Table 3: Inspection of Modification Area For Scribe Lines and Cracks
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
(b) PART 3: INSPECTION 'C' OF MODIFICATION AREA FOR SCRIBE LINES AND CRACKS includes the
following inspections:
– Inspection in accordance with service bulletin 777-53A0054, Revision 1 which includes a Detailed
inspection for scribe lines and inspection for cracks in the skin if any scribe line is found. The inspection
for cracks depends on the distance between the scribe line and the lower edge of the upper/overlap-
ping skin panel. The inspection for cracks will be a Detailed inspection plus either an ultrasonic or
a surface HFEC inspection depending on the location of the scribe line(s).
Inspection in accordance with service bulletin 777-53A0054, Revision 1 is not necessary if the con-
ditions for inspection given in that service bulletin do not apply at the stringer S-14 lap splice between
fuselage STA 655 and STA 1434.
– An external phased-array ultrasonic inspection for skin cracks and an open hole HFEC inspection
for skin cracks at the stringer S-14 lap splice between fuselage STA 655 and STA 1434.
(c) CONDITION 1: NO SUPPLEMENTAL INSTRUCTION NEEDED is applicable if ALL the following apply
at the stringer S-14 lap splice between fuselage STA 655 and STA 1434:
– No crack found with the phased array ultrasonic inspection or the open hole HFEC inspection.
– No scribe line is more than 0.006 inch deep and any skin panel that has a scribe line has been in-
spected for cracks in accordance with service bulletin 777-53A0054, Revision 1 and found to be
crack-free.
– No scribe line 0.001 inch or deeper located in a doubler edge zone. A doubler edge zone is an area
of the lower/overlapped skin where a vertical cross-section through the post-modification lap joint
will include a filler installed in accordance with this service bulletin, but not a doubler. These zones
are located at discontinuities in the modification where the doubler ends but the filler extends forward
or aft past the edge of the doubler. The location of these zones can be seen on the modification
drawings supplied with this service bulletin.
– No existing repair within 7 inches of where the modification parts will be installed.
(d) CONDITION 2: SUPPLEMENTAL INSTRUCTION NEEDED is applicable if ANY of the following apply
at the stringer S-14 lap splice between fuselage STA 655 and STA 1434:
– Any crack is found.
– There is a scribe line more than 0.006 inch deep.
– There is a scribe line 0.001 inch or deeper located in a doubler edge zone. A doubler edge zone is
an area of the lower/overlapped skin where a vertical cross-section through the post-modification
lap joint will include a filler installed in accordance with this service bulletin, but not a doubler. These
zones are located at discontinuities in the modification where the doubler ends but the filler extends
forward or aft past the edge of the doubler. The location of these zones can be seen on the modifi-
cation drawings supplied with this service bulletin.
– There is an existing repair within 7 inches of where the modification parts will be installed.
(e) The modification and post-modification inspection instruction in this service bulletin applies to airplanes
that have 30,000 or more total flight cycles when the modification is accomplished. Accomplishment of
the S-14 lap splice modification before 30,000 flight cycles would result in a need to replace skin panels
adjacent to the modification within 30,000 flight cycles after the modification and possibly other additional
work that is not given in this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
16 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 17

Table 4: Modification of Stringer S-14L/R Lap Splice
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further flight
after accomplish-
ment of PART 1 or
PART 2 or PART
3.
Install the lap splice mod-
ification in accordance
with PART 5: MODIFICA-
TION.
Airplanes on which PART
1: INSPECTION 'A' OF
MODIFICATION AREA
FOR CRACKS, or PART 2:
INSPECTION 'B' OF
MODIFICATION AREA
FOR CRACKS, or PART 3:
INSPECTION 'C' OF
MODIFICATION AREA
FOR SCRIBE LINES AND
CRACKS of this service
bulletin was done.
-See Table 5.Do post-modification in-
spections in accordance
with Table 5.
PART 5 accomplished.
Table 5: Post-Modification Inspection - Stringer S-14L/R Lap Splice
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 20,000 flight
cycles after accom-
plishment of the
modification.
Do a surface HFEC in-
spection for skin cracks
in the modified area in
accordance with PART 6.
Airplanes on which PART
5: MODIFICATION of this
service bulletin was done.
-Before further
flight.
Contact Boeing for spe-
cial repair instruction and
accomplish the repair in
accordance with the in-
struction from Boeing.
Any crack found with the
surface HFEC inspection.
8,000 flight cycles.Within 8,000 flight
cycles.
Repeat the surface HFEC
inspection for skin cracks
in the modified area in
accordance with PART 6.
No crack found with the
surface HFEC inspection
or any crack found is re-
paired.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
17 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 18

If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
In addition, the Manager of the FAA Seattle Aircraft Certification Office (ACO) approves the
accomplishment of the modification in accordance with Service Bulletin 777-53A0052, Original Issue,
as an alternative method of compliance (AMOC) to the inspection and repair requirements with
corresponding compliance times specified in paragraph (g) of AD 2012-14-03. This AMOC is only for
areas where Stringers 14L and 14R external doublers are installed in accordance with this service
bulletin. All provisions of AD 2012-14-03 that are not specifically referenced in the above statement
remain fully applicable and must be complied with.
In addition, the Manager of the FAA Seattle Aircraft Certification Office (ACO) approves the
accomplishment of the modification in accordance with Service Bulletin 777-53A0052, Original Issue
as an alternative method of compliance (AMOC) to the inspection and repair requirements of paragraphs
(g), (l) and (m) of AD 2013-07-11. This AMOC is only for areas where Stringers 14L and 14R external
doublers are installed in accordance with this service bulletin. All provisions of AD 2013-07-11 that are
not specifically referenced in the above statement remain fully applicable and must be complied with.
In addition, the Manager of the FAA Seattle Aircraft Certification Office (ACO) approves the
accomplishment of the modification in accordance with Service Bulletin 777-53A0052, Original Issue
as an alternative method of compliance (AMOC) to the inspection and repair requirements of paragraph
(g) of AD 2012-07-06. This AMOC is only for areas where Stringers 14L and 14R external doublers
are installed in accordance with this service bulletin. All provisions of AD 2012-07-06 that are not
specifically referenced in the above statement remain fully applicable and must be complied with.
G. Manpower
The tables below show an estimate of the task hours necessary to do this modification and
post-modification inspection for each airplane. These estimates are for direct labor only, done by an
experienced crew. Adjust the estimates with operator task hour data if necessary. The estimates do
not include lost time. These are some examples of lost time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Elapsed HoursTask HoursNumber of PersonsTask
32.70654.0020Open Access
4.0020.005FIGURE 13 (lift/sup-
port airplane)
5.7523.004FIGURE 11 (pre-
modification ultrasonic
inspection)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
18 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 19

Elapsed HoursTask HoursNumber of PersonsTask
35.00280.008FIGURE 1 or FIGURE
3 or FIGURE 5 (left
side modification in
fuselage Section 43)
35.00280.008FIGURE 2 or FIGURE
4 or FIGURE 6 (right
side modification in
fuselage Section 43)
49.50396.008FIGURE 7 or FIGURE
9 (left side modifica-
tion in fuselage Sec-
tion 44)
49.50396.008FIGURE 8 or FIGURE
10 (right side modifica-
tion in fuselage Sec-
tion 44)
2.0010.005Lower Airplane
32.70654.0020Close Access
246.152713.00TOTAL FOR EACH AIRPLANE
Elapsed HoursTask HoursNumber of PersonsTask
32.70654.0020Open Access
20.7583.004FIGURE 12 (Post-
Modification inspec-
tion)
32.70654.0020Close Access
86.151391.00TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+108,000.0+100.0Group 1-3
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR 62777-56RS
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
19 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 20

b. Boeing Service Bulletin 777-53A0043, 777-53A0054
c. Boeing Service Related Problem (SRP) 777-SRP-53-0165
d. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2012-07-06, 2012-14-03,
2013-07-11
e. Service Bulletin Index D624W001
f. Standard Overhaul Practices Manual (SOPM) 20-41-02, 20-43-03, 20-44-04, 20-50-01,
20-50-11, 20-50-19
g. 777 Aircraft Maintenance Manual (AMM) 07-11-01, 07-11-03, 12-15-01, 12-15-02, 25-20-00,
51-31-01
h. 777 Fleet Team Digest (FTD) 53-02004
i. 777 Non-Destructive Testing (NDT) Manual Part 10, 53-30-01, Part 4, 53-00-04, Part 6,
51-00-01, Part6, 51-00-02
j. 777-200 Structural Repair Manual (SRM) 51-50-02
2. Data Supplied with this Service Bulletin:
a. Drawings:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
20 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 21

ADCNDCN/REVSheetTitleDrawing No
--1REPAIR INSTL, S-14L/R LAP SPLICE691W0005
--10
--11
--12
--13
--14
--15
--16
--17
--18
--19
--2
--20
--21
--22
--23
--24
--25
--26
--27
--28
--29
--3
--30
--31
--32
--34
--35
--36
--37
--38
--4
--5
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
21 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 22

ADCNDCN/REVSheetTitleDrawing No
6- -
--7
--8
--9
--PSDLREPAIR INSTL, S-14L/R LAP SPLICE691W0005#DL
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-1
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-10
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-101
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-102
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-103
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-104
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-105
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-106
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-107
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-108
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-109
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-11
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-110
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-12
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-13
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-14
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-15
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-16
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-17
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-19
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-2
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-20
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-21
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-22
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-23
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-24
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-25
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-26
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
22 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 23

ADCNDCN/REVSheetTitleDrawing No
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-3
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-31
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-32
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-33
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-34
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-35
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-36
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-37
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-38
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-39
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-4
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-40
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-41
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-42
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-43
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-44
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-45
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-46
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-47
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-48
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-49
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-5
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-50
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-51
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-52
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-55
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-56
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-57
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-58
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-59
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-6
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-60
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-61
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
23 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 24

ADCNDCN/REVSheetTitleDrawing No
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-62
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-63
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-64
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-7
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-8
-APLREPAIR INSTL, S-14L/R LAP SPLICE691W0005-9
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
SKIN SPLICE INSTL - STA 655 to STA 1035, S-14L AND S-14R143W0012
SKIN SPLICE INSTL - STA 1035 to STA 1434, S-14L AND S-14R144W6220
The table above lists applicable drawings used to prepare this service bulletin. The drawings are
not necessary to make the specified changes, and are not supplied with this service bulletin. The
drawings may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS. DTI requirements for the structure affected
are contained in Paragraph 1.E., Compliance of this service bulletin.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
24 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 25

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane. As an alternative, operators can purchase the parts from Boeing Spares. This service bulletin
does not include Boeing price and supply data.
B. Industry Support Information
Boeing warranty remedies are available for 777 airplanes in warranty as of October 25, 2001. For task
hour and material reimbursement for airplanes in warranty as of that date, send a warranty claim to
Boeing Fleet Support Contracts - Warranty. The warranty remedies will expire eight years from the
original issue date of this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
The following parts or materials are necessary to do the change in this service bulletin. Parts and
materials in the manuals given in Paragraph 1.J., References, can also be necessary. Examine
operator part and material supply to make sure all necessary parts and materials are available.
NotesNameQTYPart Number / Specification
(a) (b)REPAIR INSTL, SEC 43, GROUP 11691W0005-103/-104 (LS/RS)
REPAIR INSTL, SEC 44, GROUP 11691W0005-107/-108 (LS/RS)
(a) (b)REPAIR INSTL, SEC 43, GROUP 21691W0005-101/-102 (LS/RS)
REPAIR INSTL, SEC 44, GROUP 21691W0005-107/-108 (LS/RS)
(a) (b)REPAIR INSTL, SEC 43, GROUP 31691W0005-105/-106 (LS/RS)
REPAIR INSTL, SEC 44, GROUP 31691W0005-109/-110 (LS/RS)
(c) (d)Chemical Conversion Coating1 pintAlodine: Type 1, Class A
(c) (e)Chemical Conversion Coating1 pintAlodine: Type 2, Class A
(c) (f)Primer1 quartBMS 10-79, Type 3
(c) (g)Primer1 quartBMS 10-11, Type 1
(c) (h)Sealant1 quartBMS 5-95
(a) Refer to the parts list identified in Paragraph 1.J.2., Data Supplied with this Service Bulletin
for the parts needed for the specified repair installation.
(b) Refer to 777 Structural Repair Manual Chapter 51 for alternate fasteners.
(c) Refer to the Qualified Products List at the end of the Boeing Material Specification (BMS)
for supplier data.
(d) Finish code F-17.26. Refer to SOPM 20-43-03 or 777 SRM Chapter 51 for material alter-
natives.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
25 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 26

NotesNameQTYPart Number / Specification
(e) Finish code F-17.10. Refer to SOPM 20-43-03 or 777 SRM Chapter 51 for material alter-
natives.
(f) Finish code F-19.47. Refer to SOPM 20-44-04.
(g) Finish code F-20.05 or F-20.02. Refer to SOPM 20-41-02.
(h) Refer to SOPM 20-50-11 for aerodynamic fillet sealing. Refer to SOPM 20-50-19 for ap-
plication of faying surface seal, pre-pack sealing, and wet fastener installation.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
26 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 27

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 777 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 777
Airplane Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
5. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate
full threaded fasteners (screws) needed for installation in this service bulletin.
6. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
27 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 28

7. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
8. Boeing Service Letter 777-SL-51-013, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
9. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
10. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
11. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
12. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
13. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
14. Some steps in the Work Instructions are identified as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
identified as RC must be done to comply with the AD. Alternative procedures for
steps not identified with RC can be used if the RC steps can still be done as specified,
and the airplane can be put back in a serviceable condition. An Alternative Method
of Compliance (AMOC) is not necessary for deviations to steps that are not identified
as RC.
15. The conditions and associated actions given in the work instructions can be different
on the left and right sides of the airplane. The modification given in this service bulletin
is to be accomplished on both sides of the airplane.
B. WORK INSTRUCTIONS
1. Get internal and external access to the skin lap splice at stringer S-14L/R through fuselage Sections
43 and 44. Refer to 777 AMM 25-20-00 for instruction to remove stowage bins, sidewall liners and
other interior components that block internal access to the S-14 lap splices.
2. Lift and support the airplane indoors in accordance with FIGURE 13.
3. Do inspections at the stringer S-14 lap splice in accordance with the applicable work instruction
PART identified in the table below.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
28 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 29

Applicable InspectionsAirplanes
PART 1: INSPECTION 'A' OF MODIFICATION AREA
FOR CRACKS
Airplane previously inspected at the stringer S-14 lap
splice between fuselage STA 655 and STA 1434 in
accordance with service bulletin 777-53A0054, and the
skin panels in this area of the lap splice do NOT have
a scribe line that is 0.001 inch or deeper. (a)
PART 2: INSPECTION 'B' OF MODIFICATION AREA
FOR CRACKS
Airplane previously inspected at the stringer S-14 lap
splice between fuselage STA 655 and STA 1434 in
accordance with service bulletin 777-53A0054, and
any skin panel in this area of the lap splice has a scribe
line that is 0.001 inch or deeper.
PART 3: INSPECTION 'C' OF MODIFICATION AREA
FOR SCRIBE LINES AND CRACKS
Airplane NOT previously inspected at the stringer S-14
lap splice between fuselage STA 655 and STA 1434
in accordance with service bulletin 777-53A0054. (b)
(a) The airplane has actually been inspected for scribe lines in accordance with the Original Issue or Revision
1 of service bulletin 777-53A0054, or it was previously determined, in accordance with service bulletin
777-53A0054, Revision 1, that inspection for scribe lines is not necessary at the stringer S-14 lap splice
between fuselage STA 655 and STA 1434. It is not sufficient if the inspection for scribe lines was previously
determined to be unnecessary in accordance with only the Original Issue of service bulletin 777-53A0054.
(b) Also included are airplanes for which the inspection of the stringer S-14 lap splice for scribe lines between
fuselage STA 655 and STA 1434 was previously determined to be unnecessary in accordance with only
the Original Issue of service bulletin 777-53A0054.
CONDITION 1: NO SUPPLEMENTAL INSTRUCTION NEEDED is applicable if ALL the following
apply at the skin panels common to the stringer S-14 lap splice between fuselage STA 655 and
STA 1434:
– No crack found with the phased array ultrasonic inspection or the open hole HFEC inspection.
– No scribe line is more than 0.006 inch deep and any skin panel that has a scribe line has been
inspected for cracks in accordance with service bulletin 777-53A0054, Revision 1 and found
to be crack-free.
– There is no scribe line 0.001 inch or deeper located in a doubler edge zone. A doubler edge
zone is an area of the lower/overlapped skin where a vertical cross-section through the
post-modification lap joint will include a filler installed in accordance with this service bulletin,
but not a doubler. These zones are located at discontinuities in the modification where the
doubler ends but the filler extends forward or aft past the edge of the doubler. The location
of these zones can be seen on the modification drawings supplied with this service bulletin.
– There are no existing repairs within 7 inches of where the modification parts will be installed.
CONDITION 2: SUPPLEMENTAL INSTRUCTION NEEDED applies if ANY of the following apply
at the skin panels common to the stringer S-14 lap splice between fuselage STA 655 and STA
1434:
– Any crack is found.
– There is a scribe line more than 0.006 inch deep.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
29 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 30

– There is a scribe line 0.001 inch or deeper located in a doubler edge zone. A doubler edge
zone is an area of the lower/overlapped skin where a vertical cross-section through the
post-modification lap joint will include a filler installed in accordance with this service bulletin,
but not a doubler. These zones are located at discontinuities in the modification where the
doubler ends but the filler extends forward or aft past the edge of the doubler. The location
of these zones can be seen on the modification drawings supplied with this service bulletin.
– There is an existing repair within 7 inches of where the modification parts will be installed.
4. If CONDITION 1 is found: The work given in this step is not applicable.
If CONDITION 2 is found: Do PART 4: SUPPLEMENTAL INSTRUCTION.
5. Do PART 5: MODIFICATION.
6. Remove the fuselage cradles, lower the airplane off the jacks and service the main gear and nose
gear shock struts. Refer to 777 AMM 07-11-01 for applicable instruction.
7. Install interior components removed to get internal access. Refer to 777 AMM 25-20-00 for
instruction to install stowage bins, sidewall liners and other interior components.
8. Put the airplane back to a serviceable condition.
9. Do post-modification Inspections in accordance with Paragraph 1.E., Compliance and PART 6:
POST-MODIFICATION INSPECTION.
PART 1: INSPECTION 'A' OF MODIFICATION AREA FOR CRACKS
1. RC - Do an external phased array ultrasonic inspection for cracks in the lower/overlapped skin of
the stringer S-14L/R lap splices between fuselage STA 655 and STA 1434 in accordance with
FIGURE 11.
NOTE: The inspection to be accomplished with this step is identical to the stringer S-14L/R
inspection given in Boeing Service Bulletin 777-53A0043.
2. RC - Remove fasteners and do an open hole HFEC inspection for skin cracks at the upper and
lower fastener rows of the stringer S-14L/R lap splices in accordance with the Figure identified in
the table below.
NOTE: There are limits specified for the removal of fasteners from the lap splice and these limits
can affect how the modification parts are installed. The following limits apply for the
removal of fasteners from the stringer S-14 lap splice:
– On each side of the airplane, fasteners can be removed along no more than 100
inches of the stringer S-14 lap splice.
– Where fasteners are removed from the stringer S-14 lap splice on one side of the
airplane, fasteners are NOT to be removed from the equivalent segment of the
stringer S-14 lap splice on the opposite side of the airplane.
Section 44 (L/R)Section 43 (L/R)Group
FIGURE 7 / FIGURE 8FIGURE 1 / FIGURE 21
FIGURE 7 / FIGURE 8FIGURE 3 / FIGURE 42
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
30 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 31

Section 44 (L/R)Section 43 (L/R)Group
FIGURE 9 / FIGURE 10FIGURE 5 / FIGURE 63
PART 2: INSPECTION 'B' OF MODIFICATION AREA FOR CRACKS
1. RC - Inspect any skin panel common to the stringer S-14 lap splice between fuselage STA 655
and STA 1434 that has a scribe line 0.001 inch or deeper for cracks in accordance with service
bulletin 777-53A0054, Revision 1.
NOTE: The inspection for cracks will be a Detailed inspection plus either an ultrasonic inspection
or a surface HFEC inspection depending on the location of the scribe line(s). The skin
panels to be inspected with this step were found to have a scribe line 0.001 inch or deeper
from a previous inspection in accordance with service bulletin 777-53A0054.
2. RC - Do an external phased array ultrasonic inspection for cracks in the lower/overlapped skin of
the stringer S-14L/R lap splices between fuselage STA 655 and STA 1434 in accordance with
FIGURE 11.
NOTE: The inspection to be accomplished with this step is identical to the stringer S-14L/R
inspection given in Boeing Service Bulletin 777-53A0043.
3. RC - Remove fasteners and do an open hole HFEC inspection for skin cracks at the upper and
lower fastener rows of the stringer S-14L/R lap splices in accordance with the Figure identified in
the table below.
NOTE: There are limits specified for the removal of fasteners from the lap splice and these limits
can affect how the modification parts are installed. The following limits apply for the
removal of fasteners from the stringer S-14 lap splice:
– On each side of the airplane, fasteners can be removed along no more than 100
inches of the stringer S-14 lap splice.
– Where fasteners are removed from the stringer S-14 lap splice on one side of the
airplane, fasteners are NOT to be removed from the equivalent segment of the
stringer S-14 lap splice on the opposite side of the airplane.
Section 44 (L/R)Section 43 (L/R)Group
FIGURE 7 / FIGURE 8FIGURE 1 / FIGURE 21
FIGURE 7 / FIGURE 8FIGURE 3 / FIGURE 42
FIGURE 9 / FIGURE 10FIGURE 5 / FIGURE 63
PART 3: INSPECTION 'C' OF MODIFICATION AREA FOR SCRIBE LINES AND CRACKS
1. RC - Inspect the stringer S-14 lap splice between fuselage STA 655 and STA 1434 on both sides
of the airplane for scribe lines and cracks in accordance with service bulletin 777-53A0054, Revision
1.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
31 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 32

NOTE: – Inspection in accordance with service bulletin 777-53A0054 includes a Detailed
inspection for scribe lines and inspection for cracks if any scribe line is found. The
inspection for cracks will be a Detailed inspection plus either an ultrasonic inspection
or a surface HFEC inspection depending on the location of the scribe line(s).
– This instruction to inspect the stringer S-14 lap splice in accordance with service
bulletin 777-53A0054, Revision 1 also applies if inspection of the stringer S-14 lap
splice between fuselage STA 655 and STA 1434 was determined to be unnecessary
in accordance with only the Original Issue of service bulletin 777-53A0054.
– Inspection in accordance with service bulletin 777-53A0054, Revision 1 is not
necessary if the conditions for inspection given in service bulletin 777-53A0054,
Revision 1 do not apply at the stringer S-14 lap splice between fuselage STA 655
and STA 1434 for the airplane to be modified in accordance with this service bulletin.
2. RC - Do an external phased array ultrasonic inspection for cracks in the lower/overlapped skin of
the stringer S-14L/R lap splices between fuselage STA 655 and STA 1434 in accordance with
FIGURE 11.
NOTE: The inspection to be accomplished with this step is identical to the stringer S-14L/R
inspection given in Boeing Service Bulletin 777-53A0043.
3. RC - Remove fasteners and do an open hole HFEC inspection for skin cracks at the upper and
lower fastener rows of the stringer S-14L/R lap splices in accordance with the Figure identified in
the table below.
NOTE: There are limits specified for the removal of fasteners from the lap splice and these limits
can affect how the modification parts are installed. The following limits apply for the
removal of fasteners from the stringer S-14 lap splice:
– On each side of the airplane, fasteners can be removed along no more than 100
inches of the stringer S-14 lap splice.
– Where fasteners are removed from the stringer S-14 lap splice on one side of the
airplane, fasteners are NOT to be removed from the equivalent segment of the
stringer S-14 lap splice on the opposite side of the airplane.
Section 44 (L/R)Section 43 (L/R)Group
FIGURE 7 / FIGURE 8FIGURE 1 / FIGURE 21
FIGURE 7 / FIGURE 8FIGURE 3 / FIGURE 42
FIGURE 9 / FIGURE 10FIGURE 5 / FIGURE 63
PART 4: SUPPLEMENTAL INSTRUCTION
1. RC - Contact Boeing to get supplemental instruction for the modification given in this service
bulletin.
NOTE: Supplemental instruction for the modification given in this service bulletin is needed if
ANY of the following apply at the skin panels common to the stringer S-14 lap splice
between fuselage STA 655 and STA 1434:
– Any crack is found.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
32 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 33

– There is a scribe line more than 0.006 inch deep.
– There is a scribe line 0.001 inch or deeper located in a doubler edge zone. A doubler
edge zone is an area of the lower/overlapped skin where a vertical cross-section
through the post-modification lap joint will include a filler installed in accordance with
this service bulletin, but not a doubler. These zones are located at discontinuities in
the modification where the doubler ends but the filler extends forward or aft past the
edge of the doubler. The location of these zones can be seen on the modification
drawings supplied with this service bulletin.
– There is an existing repair within 7 inches of where the modification parts will be
installed.
PART 5: MODIFICATION
1. RC - Accomplish the lap splice modification as follows:
CONDITION 1: Accomplish the lap splice modification in accordance with step 2 of the Figure
identified in the table below.
CONDITION 2: Accomplish the lap splice modification in accordance with step 2 of the Figure
identified in the table below plus the supplemental instruction from PART 4: SUPPLEMENTAL
INSTRUCTION.
NOTE: It is permitted to accomplish the work given in each figure independently; however, the
full modification is to be accomplished by the time given in Paragraph 1.E., Compliance,
Table 1.
Section 44 (Left / Right)Section 43 (Left / Right)Group
FIGURE 7 / FIGURE 8FIGURE 1 / FIGURE 21
FIGURE 7 / FIGURE 8FIGURE 3 / FIGURE 42
FIGURE 9 / FIGURE 10FIGURE 5 / FIGURE 63
PART 6: POST-MODIFICATION INSPECTION
1. Get internal access to the lap splice at stringer S-14L/R in fuselage Sections 43 and 44. Refer to
777 AMM 25-20-00 for instruction to remove sidewall liners and other components in the passenger
compartment that block access to the S-14 lap splices.
2. RC - Do post-modification inspections for skin cracks in the modified lap splices on both sides of
the airplane in accordance with FIGURE 12 and Paragraph 1.E., Compliance.
3. RC - If any crack is found with a post-modification inspection, contact Boeing for special repair
instruction and accomplish the repair in accordance with the instruction from Boeing.
4. Install interior components removed to get internal access. Refer to 777 AMM 25-20-00 for
instruction to install sidewall liners and other interior components.
5. Put the airplane back to a serviceable condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
33 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 34 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
This Figure applies only to: Group 1.
STA
1035
• BL 0
STA  -S-14L
655
DOUBLER
FILLER
SHEET 1
DOUBLER
FILLER
SHEET 2
SHEET 3
2
SHEET 3
SHEET 2
2330152
FIGURE 1: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE
(SHEET 1 OF 7)
Original Issue: October 10, 2014
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-53A0052
Work - See page 1 for details.  34 of 113

### Page 35 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
A
S-14L -
A -
(TYPICAL AT SHADED
FASTENER ROWS)
FWD  THIS VIEW SHOWS THE LAP SPLICE BEFORE THE  FILLERS AND DOUBLERS ARE INSTALLED
UPPER
SKIN PANEL-
LOWER  INBD
SKIN PANEL —
A-A  2330267
FIGURE 1: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE
(SHEET 2 OF 7)
Original Issue: October 10, 2014
Export Controlled ECCN: 9E991 - BOEING  777-53A0052
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  35 of 113

### Page 36

FIGURE 1: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE
(SHEET 3 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
36 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 37 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
UPPER -  UPPER-
FUSELAGE  FUSELAGE
SKIN  SKIN
DOUBLER  DOUBLER-
FILLER SPLICE
PLATE
FILLER-  FILLER-
LOWER  LOWER
FUSELAGE  FUSELAGE
SKIN  SKIN
INBD
INBD
TYPICAL SECTION AWAY FROM
DOUBLER AND FILLER SPLICE PLATES  TYPICAL FILLER SPLICE
B-B  C-C
2330400
FIGURE 1: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE
(SHEET 4 OF 7)
Original Issue: October 10, 2014
Export Controlled ECCN: 9E991 - BOEING  777-53A0052
PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  37 of 113

### Page 38 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
UPPER —  →
FUSELAGE
SKIN
DOUBLER SPLICE
- PLATE
DOUBLER SPLICE
PLATE
DOUBLER-
FILLER-
LOWER -
FUSELAGE
SKIN
INBD
TYPICAL DOUBLER SPLICE
D-D
2330420
FIGURE 1: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE
(SHEET 5 OF 7)
Original Issue: October 10, 2014
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-53A0052
Work - See page 1 for details.  38 of 113

### Page 39

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
NOTE: The change referred to as a modification in this service bulletin is named a Repair Installation in this
figure and in the title block of the drawing sheets showing the modification.
CAUTION: THE AIRPLANE IS TO BE JACKED/SUPPORTED IN ACCORDANCE WITH THIS SERVICE
BULLETIN TO ACCOMPLISH THE WORK GIVEN IN THIS FIGURE. ATTEMPTING TO DO THIS
WORK WITHOUT SATISFACTORY SUPPORT OF THE AIRPLANE COULD CAUSE DAMAGE
TO THE STRUCTURE.
CAUTION: THE THREE ROWS OF FASTENERS IN THE LAP SPLICE AT STRINGER S-14 MUST BE
REMOVED TO ACCOMPLISH THE MODIFICATION GIVEN IN THIS FIGURE. TO PREVENT
SEPARATION OF THE UPPER AND LOWER SKIN PANELS, FASTENERS ARE TO BE
REMOVED FROM ONLY A LIMITED LENGTH/LOCATION OF THE LAP SPLICE ON EACH SIDE
OF THE AIRPLANE. IF THE LIMITS GIVEN IN THIS FIGURE FOR REMOVAL OF FASTENERS
FROM THE LAP SPLICES ARE NOT OBEYED, SEPARATION AND MISALIGNMENT OF THE
UPPER AND LOWER SKIN PANELS COULD OCCUR.
More DataQtyIdentificationNameTaskStep
(a) (c)--Upper and Lower Skin
Panels
Inspect1
(b) (c) (d)-691W0005-103Repair InstlInstall (New)2
(a) An Open Hole HFEC inspection of the upper and lower skin panels is to be accomplished in accordance
with 777 NDT Manual Part6, 51-00-02, Procedure 1 at fastener holes in the upper and lower rows of the
lap splice. The skin panels are to be inspected at the fastener holes common to the doublers of the
identified Repair Instl to be installed in accordance with drawing 691W0005 Sheets 1-3.
(b) Install the parts in accordance with drawing 691W0005, Sheets 1-3. The parts are to be fabricated in ac-
cordance with drawing 691W0005. The table below identifies the applicable 691W0005 drawing sheet
for each part.
The information given in figure Detail B applies at any frame station where the affected fastener shown
is common to the shear tie and a modification filler and doubler.
(c) The following limits apply for the removal of fasteners from the stringer S-14 lap splice:
– On each side of the airplane, fasteners can be removed along no more than 100 inches of the stringer
S-14 lap splice.
– Where fasteners are removed from the stringer S-14 lap splice on one side of the airplane, fasteners
are not to be removed from the equivalent segment of the stringer S-14 lap splice on the opposite
side of the airplane.
(d) Except where noted otherwise, the fastener edge margin is to be no less than 1.7D and the fastener
spacing is to be no less than 3.5D for all parts.
More DataQtyIdentificationName
Flag
Note
(a)--Affected Fastener1
FIGURE 1: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE
(SHEET 6 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
39 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 40

More DataQtyIdentificationName
Flag
Note
(a) At the affected fastener location, the distance between the center of the fastener hole and the edge of the
filler must be 1.5 or more times the hole diameter. If this distance would be less, the initial fastener instal-
lation is to be kept and there will not be a fastener through the filler and doubler at this location.
691W0005 SheetQuantityNamePart Number
91Doubler691W0005-9
101Doubler691W0005-11
111Doubler691W0005-13
121Doubler691W0005-15
51Filler691W0005-1
61Filler691W0005-3
71Filler691W0005-5
81Filler691W0005-7
134Splice Plate691W0005-17
142Splice Plate691W0005-19
152Splice Plate691W0005-21
FIGURE 1: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE
(SHEET 7 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
40 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 41 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
This Figure applies only to: Group 1.
STA
1035
BL O
S-14R.
STA
655
00009
‚DOUBLER
>o>o  FILLER
B
SHEET 1
DOUBLER
LER
ISHEET 2
B
SHEET 3
SHEET 3
SHEET 2
2330462
FIGURE 2: LAP SPLICE MODIFICATION - SECTION 43 - RIGHT SIDE
(SHEET 1 OF 7)
Original Issue: October 10, 2014
Export Controlled ECCN: 9E991 - BOEING  777-53A0052
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  41 of 113

### Page 42 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
S-14R -
TYPICAL AT SHADED
FASTENER ROWS)
THIS VIEW SHOWS THE LAP SPLICE BEFORE THE
FWD  FILLERS AND DOUBLERS ARE INSTALLED
UPPER
SKIN PANEL
LOWER  INBD
SKIN PANEL —
A-A  2330464
FIGURE 2: LAP SPLICE MODIFICATION - SECTION 43 - RIGHT SIDE
(SHEET 2 OF 7)
Original Issue: October 10, 2014
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-53A0052
Work - See page 1 for details.  42 of 113

### Page 43

FIGURE 2: LAP SPLICE MODIFICATION - SECTION 43 - RIGHT SIDE
(SHEET 3 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
43 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 44 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
UPPER—  JPPER —
FUSELAGE  FUSELAGE
SKIN  SKIN
DOUBLER  DOUBLER
' FILLER SPLICE
PLATE
FILLER-  FILLER
LOWER  LOWER
FUSELAGE  FUSELAGE
SKIN  SKIN
INBD
INBD
TYPICAL SECTION AWAY FROM
DOUBLER AND FILLER SPLICE PLATES  TYPICAL FILLER SPLICE
B-B  C-C
2330466
FIGURE 2: LAP SPLICE MODIFICATION - SECTION 43 - RIGHT SIDE
(SHEET 4 OF 7)
Original Issue: October 10, 2014
Export Controlled ECCN: 9E991 - BOEING  777-53A0052
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  44 of 113

### Page 45 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
OPPER—
FUSELAGE
SKIN
DOUBLER SPLICE
— PLATE
• DOUBLER SPLICE
PLATE
DOUBLER-
FILLER -
LOWER
FUSELAGE
SKIN
INBD
TYPICAL DOUBLER SPLICE
D-D
2330467
FIGURE 2: LAP SPLICE MODIFICATION - SECTION 43 - RIGHT SIDE
(SHEET 5 OF 7)
Original Issue: October 10, 2014
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-53A0052
Work - See page 1 for details.  45 of 113

### Page 46

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
NOTE: The change referred to as a modification in this service bulletin is named a Repair Installation in this
figure and in the title block of the drawing sheets showing the modification.
CAUTION: THE AIRPLANE IS TO BE JACKED/SUPPORTED IN ACCORDANCE WITH THIS SERVICE
BULLETIN TO ACCOMPLISH THE WORK GIVEN IN THIS FIGURE. ATTEMPTING TO DO THIS
WORK WITHOUT SATISFACTORY SUPPORT OF THE AIRPLANE COULD CAUSE DAMAGE
TO THE STRUCTURE.
CAUTION: THE THREE ROWS OF FASTENERS IN THE LAP SPLICE AT STRINGER S-14 MUST BE
REMOVED TO ACCOMPLISH THE MODIFICATION GIVEN IN THIS FIGURE. TO PREVENT
SEPARATION OF THE UPPER AND LOWER SKIN PANELS, FASTENERS ARE TO BE
REMOVED FROM ONLY A LIMITED LENGTH/LOCATION OF THE LAP SPLICE ON EACH SIDE
OF THE AIRPLANE. IF THE LIMITS GIVEN IN THIS FIGURE FOR REMOVAL OF FASTENERS
FROM THE LAP SPLICES ARE NOT OBEYED, SEPARATION AND MISALIGNMENT OF THE
UPPER AND LOWER SKIN PANELS COULD OCCUR.
More DataQtyIdentificationNameTaskStep
(a) (c)--Upper and Lower Skin
Panels
Inspect1
(b) (c) (d)-691W0005-104Repair InstlInstall (New)2
(a) An Open Hole HFEC inspection of the upper and lower skin panels is to be accomplished in accordance
with 777 NDT Manual Part6, 51-00-02, Procedure 1 at fastener holes in the upper and lower rows of the
lap splice. The skin panels are to be inspected at the fastener holes common to the doublers of the
identified Repair Instl to be installed in accordance with drawing 691W0005 Sheets 1-3.
(b) Install the modification parts in accordance with drawing 691W0005, Sheets 1-3. The parts needed for
the Repair Instl are to be fabricated in accordance with drawing 691W0005. The table below identifies
the applicable 691W0005 drawing sheet for each part.
The information given in figure Detail B applies at any frame station where the affected fastener shown
is common to the shear tie and a modification filler and doubler.
(c) The following limits apply for removal of fasteners from the stringer S-14 lap splice:
– On each side of the airplane, fasteners can be removed along no more than 100 inches of the stringer
S-14 lap splice.
– Where fasteners are removed from the stringer S-14 lap splice on one side of the airplane, fasteners
are not to be removed from the equivalent segment of the stringer S-14 lap splice on the opposite
side of the airplane.
(d) Except where noted otherwise, the fastener edge margin is to be no less than 1.7D and the fastener
spacing is to be no less than 3.5D for all parts.
More DataQtyIdentificationName
Flag
Note
(a)--Affected Fastener1
FIGURE 2: LAP SPLICE MODIFICATION - SECTION 43 - RIGHT SIDE
(SHEET 6 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
46 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 47

More DataQtyIdentificationName
Flag
Note
(a) At the affected fastener location, the distance between the center of the fastener hole and the edge of the
filler must be 1.5 or more times the hole diameter. If this distance would be less, the initial fastener instal-
lation is to be kept and there will not be a fastener through the filler and doubler at this location.
691W0005 SheetQuantityNamePart Number
91Doubler691W0005-10
101Doubler691W0005-12
111Doubler691W0005-14
121Doubler691W0005-16
51Filler691W0005-2
61Filler691W0005-4
71Filler691W0005-6
81Filler691W0005-8
134Splice Plate691W0005-17
142Splice Plate691W0005-20
152Splice Plate691W0005-22
FIGURE 2: LAP SPLICE MODIFICATION - SECTION 43 - RIGHT SIDE
(SHEET 7 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
47 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 48 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
This Figure applies only to: Group 2.
STA
1035
→ BL 0
STA  -S-14L
655
poo00  O
DOUBLER
FILLER
•
SHEET 1
DOUBLER
FILLER
SHEET 2  2
2330473
FIGURE 3: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE
(SHEET 1 OF 7)
Original Issue: October 10, 2014
Export Controlled ECCN: 9E991 - BOEING  777-53A0052
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  48 of 113

### Page 49 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
A
S-14L -
A -
(TYPICAL AT SHADED
FASTENER ROWS)
FWD  THIS VIEW SHOWS THE LAP SPLICE BEFORE THE  FILLERS AND DOUBLERS ARE INSTALLED
UPPER
SKIN PANEL-
LOWER  INBD
SKIN PANEL —
A-A  2330476
FIGURE 3: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE
(SHEET 2 OF 7)
Original Issue: October 10, 2014
Export Controlled ECCN: 9E991 - BOEING  777-53A0052
PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  49 of 113

### Page 50

FIGURE 3: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE
(SHEET 3 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
50 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 51 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
UPPER -  UPPER-
FUSELAGE  FUSELAGE
SKIN  SKIN
DOUBLER  DOUBLER-
FILLER SPLICE
PLATE
FILLER-  FILLER-
LOWER  LOWER
FUSELAGE  FUSELAGE
SKIN  SKIN
INBD
INBD
TYPICAL SECTION AWAY FROM
DOUBLER AND FILLER SPLICE PLATES  TYPICAL FILLER SPLICE
B-B  C-C
2330480
FIGURE 3: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE
(SHEET 4 OF 7)
Original Issue: October 10, 2014
Export Controlled ECCN: 9E991 - BOEING  777-53A0052
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  51 of 113

### Page 52 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
UPPER —  →
FUSELAGE
SKIN
DOUBLER SPLICE
- PLATE
DOUBLER SPLICE
PLATE
DOUBLER-
FILLER-
LOWER -
FUSELAGE
SKIN
INBD
TYPICAL DOUBLER SPLICE
D-D
2330481
FIGURE 3: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE
(SHEET 5 OF 7)
Original Issue: October 10, 2014
Export Controlled ECCN: 9E991 - BOEING  777-53A0052
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  52 of 113

### Page 53

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
NOTE: The change referred to as a modification in this service bulletin is named a Repair Installation in this
figure and in the title block of the drawing sheets showing the modification.
CAUTION: THE AIRPLANE IS TO BE JACKED/SUPPORTED IN ACCORDANCE WITH THIS SERVICE
BULLETIN TO ACCOMPLISH THE WORK GIVEN IN THIS FIGURE. ATTEMPTING TO DO THIS
WORK WITHOUT SATISFACTORY SUPPORT OF THE AIRPLANE COULD CAUSE DAMAGE
TO THE STRUCTURE.
CAUTION: THE THREE ROWS OF FASTENERS IN THE LAP SPLICE AT STRINGER S-14 MUST BE
REMOVED TO ACCOMPLISH THE MODIFICATION GIVEN IN THIS FIGURE. TO PREVENT
SEPARATION OF THE UPPER AND LOWER SKIN PANELS, FASTENERS ARE TO BE
REMOVED FROM ONLY A LIMITED LENGTH/LOCATION OF THE LAP SPLICE ON EACH SIDE
OF THE AIRPLANE. IF THE LIMITS GIVEN IN THIS FIGURE FOR REMOVAL OF FASTENERS
FROM THE LAP SPLICES ARE NOT OBEYED, SEPARATION AND MISALIGNMENT OF THE
UPPER AND LOWER SKIN PANELS COULD OCCUR.
More DataQtyIdentificationNameTaskStep
(a) (c)--Upper and Lower Skin
Panels
Inspect1
(b) (c) (d)-691W0005-101Repair InstlInstall (New)2
(a) An Open Hole HFEC inspection of the upper and lower skin panels is to be accomplished in accordance
with 777 NDT Manual Part6, 51-00-02, Procedure 1 at fastener holes in the upper and lower rows of the
lap splice. The skin panels are to be inspected at the fastener holes common to the doublers of the
identified Repair Instl to be installed in accordance with drawing 691W0005 Sheets 1, 2.
(b) Install the parts in accordance with drawing 691W0005, Sheets 1, 2. The parts are to be fabricated in
accordance with drawing 691W0005. The table below identifies the applicable 691W0005 drawing sheet
for each part.
The information given in figure Detail B applies at any frame station where the affected fastener shown
is common to the shear tie and a modification filler and doubler.
(c) The following limits apply for removal of fasteners from the stringer S-14 lap splice:
– On each side of the airplane, fasteners can be removed along no more than 100 inches of the stringer
S-14 lap splice.
– Where fasteners are removed from the stringer S-14 lap splice on one side of the airplane, fasteners
are not to be removed from the equivalent segment of the stringer S-14 lap splice on the opposite
side of the airplane.
(d) Except where noted otherwise, the fastener edge margin is to be no less than 1.7D and the fastener
spacing is to be no less than 3.5D for all parts.
More DataQtyIdentificationName
Flag
Note
(a)--Affected Fastener1
FIGURE 3: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE
(SHEET 6 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
53 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 54

More DataQtyIdentificationName
Flag
Note
(a) At the affected fastener location, the distance between the center of the fastener hole and the edge of the
filler must be 1.5 or more times the hole diameter. If this distance would be less, the initial fastener instal-
lation is to be kept and there will not be a fastener through the filler and doubler at this location.
691W0005 SheetQuantityNamePart Number
91Doubler691W0005-9
101Doubler691W0005-11
111Doubler691W0005-13
121Doubler691W0005-15
51Filler691W0005-1
61Filler691W0005-3
71Filler691W0005-5
81Filler691W0005-7
134Splice Plate691W0005-17
142Splice Plate691W0005-19
152Splice Plate691W0005-21
FIGURE 3: LAP SPLICE MODIFICATION - SECTION 43 - LEFT SIDE
(SHEET 7 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
54 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 55 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
This Figure applies only to: Group 2.
BLO.
S-14R-
STA
655
O
00000
OF
DOUBLER
, FILLER
B
SHEET 1  70
DOUBLER
FILLER
SHEET 2
FIGURE 4: LAP SPLICE MODIFICATION - SECTION 43 - RIGHT SIDE
(SHEET 1 OF 7)
Original Issue: October 10, 2014
Export Controlled ECCN: 9E991 - BOEING  777-53A0052
PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  55 of 113

### Page 56 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
S-14R -
TYPICAL AT SHADED
FASTENER ROWS)
THIS VIEW SHOWS THE LAP SPLICE BEFORE THE
FWD  FILLERS AND DOUBLERS ARE INSTALLED
UPPER
SKIN PANEL
LOWER  SKIN PANEL -→  INBD
A-A  2330489
FIGURE 4: LAP SPLICE MODIFICATION - SECTION 43 - RIGHT SIDE
(SHEET 2 OF 7)
Original Issue: October 10, 2014
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-53A0052
Work - See page 1 for details.  56 of 113

### Page 57

FIGURE 4: LAP SPLICE MODIFICATION - SECTION 43 - RIGHT SIDE
(SHEET 3 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
57 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

### Page 58 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
UPPER—  JPPER —
FUSELAGE  FUSELAGE
SKIN  SKIN
DOUBLER  DOUBLER
' FILLER SPLICE
PLATE
FILLER-  FILLER
LOWER  LOWER
FUSELAGE  FUSELAGE
SKIN  SKIN
INBD
INBD
TYPICAL SECTION AWAY FROM
DOUBLER AND FILLER SPLICE PLATES  TYPICAL FILLER SPLICE
B-B  C-C
2330490
FIGURE 4: LAP SPLICE MODIFICATION - SECTION 43 - RIGHT SIDE
(SHEET 4 OF 7)
Original Issue: October 10, 2014
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-53A0052
Work - See page 1 for details.  58 of 113

### Page 59 (OCR)

BOEING SERVICE BULLETIN 777-53A0052
ALERT  ALERT
OPPER—
FUSELAGE
SKIN
DOUBLER SPLICE
— PLATE
• DOUBLER SPLICE
PLATE
DOUBLER-
FILLER -
LOWER
FUSELAGE
SKIN
INBD
TYPICAL DOUBLER SPLICE
D-D
2330493
FIGURE 4: LAP SPLICE MODIFICATION - SECTION 43 - RIGHT SIDE
(SHEET 5 OF 7)
Original Issue: October 10, 2014
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-53A0052
Work - See page 1 for details.  59 of 113

### Page 60

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
NOTE: The change referred to as a modification in this service bulletin is named a Repair Installation in this
figure and in the title block of the drawing sheets showing the modification.
CAUTION: THE AIRPLANE IS TO BE JACKED/SUPPORTED IN ACCORDANCE WITH THIS SERVICE
BULLETIN TO ACCOMPLISH THE WORK GIVEN IN THIS FIGURE. ATTEMPTING TO DO THIS
WORK WITHOUT SATISFACTORY SUPPORT OF THE AIRPLANE COULD CAUSE DAMAGE
TO THE STRUCTURE.
CAUTION: THE THREE ROWS OF FASTENERS IN THE LAP SPLICE AT STRINGER S-14 MUST BE
REMOVED TO ACCOMPLISH THE MODIFICATION GIVEN IN THIS FIGURE. TO PREVENT
SEPARATION OF THE UPPER AND LOWER SKIN PANELS, FASTENERS ARE TO BE
REMOVED FROM ONLY A LIMITED LENGTH/LOCATION OF THE LAP SPLICE ON EACH SIDE
OF THE AIRPLANE. IF THE LIMITS GIVEN IN THIS FIGURE FOR REMOVAL OF FASTENERS
FROM THE LAP SPLICES ARE NOT OBEYED, SEPARATION AND MISALIGNMENT OF THE
UPPER AND LOWER SKIN PANELS COULD OCCUR.
More DataQtyIdentificationNameTaskStep
(a) (c)--Upper and Lower Skin
Panels
Inspect1
(b) (c) (d)-691W0005-102Repair InstlInstall (New)2
(a) An Open Hole HFEC inspection of the upper and lower skin panels is to be accomplished in accordance
with 777 NDT Manual Part6, 51-00-02, Procedure 1 at fastener holes in the upper and lower rows of the
lap splice. The skin panels are to be inspected at the fastener holes common to the doublers of the
identified Repair Instl to be installed in accordance with drawing 691W0005 Sheets 1, 2.
(b) Install the modification parts in accordance with drawing 691W0005, Sheets 1, 2. The parts needed for
the Repair Instl are to be fabricated in accordance with drawing 691W0005. The table below identifies
the applicable 691W0005 drawing sheet for each part.
The information given in figure Detail B applies at any frame station where the affected fastener shown
is common to the shear tie and a modification filler and doubler.
(c) The following limits apply for removal of fasteners from the stringer S-14 lap splice:
– On each side of the airplane, fasteners can be removed along no more than 100 inches of the stringer
S-14 lap splice.
– Where fasteners are removed from the stringer S-14 lap splice on one side of the airplane, fasteners
are not to be removed from the equivalent segment of the stringer S-14 lap splice on the opposite
side of the airplane.
(d) Except where noted otherwise, the fastener edge margin is to be no less than 1.7D and the fastener
spacing is to be no less than 3.5D for all parts.
More DataQtyIdentificationName
Flag
Note
(a)--Affected Fastener1
FIGURE 4: LAP SPLICE MODIFICATION - SECTION 43 - RIGHT SIDE
(SHEET 6 OF 7)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: October 10, 2014
777-53A0052
60 of 113
BOEING SERVICE BULLETIN 777-53A0052
ALERTALERT

The text continues at https://openairdocs.org/service-documents/boeing/777-53a0052/file/6942718c64a1.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
